MIBs Depot

RC-VLAN-MIB

Registered at
1.3.6.1.4.1.2272.1.3.0
1.3.6.1.4.1.2272.1.35.1
Last updated
2013-10-11 00:00
Organization
Bay Networks, Rapid-City Group
Revisions
2013-10-11 00:00, 2013-03-18 00:00, 2012-12-19 00:00, 2012-08-02 00:00, 2012-07-23 00:00, 2012-06-21 00:00, 2012-02-21 00:00, 2012-02-13 00:00, 2011-12-01 00:00, 2011-09-12 00:00, 2011-05-26 00:00, 2011-04-22 00:00, 2011-03-02 00:00, 2011-01-13 00:00, 2010-09-22 00:00, 2010-09-13 00:00, 2009-09-16 00:00, 2009-06-03 00:00, 2009-03-31 00:00, 2009-03-30 00:00, 2009-03-10 00:00, 2008-08-15 00:00, 2008-08-04 00:00, 2008-07-23 00:00, 2008-06-03 00:00, 2008-05-09 00:00, 2008-03-14 00:00, 2008-03-05 00:00, 2008-02-25 00:00, 2007-11-21 00:00, 2007-10-18 00:00, 2007-10-10 00:00, 2007-04-06 00:00, 2007-03-08 00:00, 2007-01-31 00:00, 2006-12-06 00:00, 2006-05-31 00:00, 2006-02-09 00:00, 2005-11-22 00:00, 2005-08-15 00:00, 2005-08-10 00:00, 2005-04-27 00:00, 2005-03-14 00:00, 2005-02-04 00:00, 2005-01-04 00:00, 2004-12-03 00:00, 2004-11-29 00:00, 2004-11-24 00:00, 2004-11-20 00:00, 2004-10-04 00:00, 2004-09-28 00:00, 2004-09-23 00:00, 2004-09-21 00:00, 2004-09-08 00:00, 2004-08-25 00:00, 2004-07-13 00:00, 2004-06-22 00:00, 2004-06-16 00:00
Namespace
nortel
Source file
RC-VLAN-MIB
Digest
sha256:2f4925c065992564a08f15fc09b2cd78a9166c78a056d5f4e1e8598ea5ef2883

Description

Enterprise MIB for the Accelar product family.

Contact

Edwin Tsang Postal: Bay Networks, Inc. 4401 Great America Parkway Santa Clara, CA 95052-8185 Tel: 408-495-6159 Fax: 408-495-5215 E-mail: edwin_tsang@baynetworks.com

Imports

FromSymbols
IF-MIBInterfaceIndex, InterfaceIndexOrZero
INET-ADDRESS-MIBInetAddress, InetAddressType
RAPID-CITYEnableValue, IdList, LPortSet, PortSet, RcVlanIdOrNone, rcSvlan, rcVlan
RC-VRF-MIBVrfIdentifier
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ATM-TC-MIB
BGP4-MIB
DIFFSERV-DSCP-TC
DIFFSERV-MIB
DVMRP-STD-MIB
IANA-ADDRESS-FAMILY-NUMBERS-MIB
IANA-RTPROTO-MIB
IANAifType-MIB
IEEE8021-SECY-MIB
IF-MIB
IGMP-STD-MIB
INET-ADDRESS-MIB
INTEGRATED-SERVICES-MIB
IP-MIB
IPMROUTE-STD-MIB
IPV6-MIB
IPV6-MLD-MIB
IPV6-TC
LLDP-MIB
MPLS-TC-STD-MIB
MSDP-MIB
RADIUS-DYNAUTH-SERVER-MIB
RAPID-CITY
RC-VLAN-MIB
RC-VRF-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TOKEN-RING-RMON-MIB
VRRP-MIB

Objects

NameOIDSyntaxAccessStatus
rcVlanNumVlans
OBJECT-TYPE
The number of VLANs currently defined in the switch.
1.3.6.1.4.1.2272.1.3.1Integer32 (1..128)read-onlycurrent
rcVlanTable
OBJECT-TYPE
A list of Virtual LAN entries. The number of entries is given by rcVlanNumVlans.
1.3.6.1.4.1.2272.1.3.2not-accessiblecurrent
rcVlanEntry
OBJECT-TYPE
Entry containing configuration information for a particular Virtual LAN. The relationship between the various port sets in a VLAN Entry are : o The set of ports defined by PortMembers must be a subset of the set of ports in the underlying STG of the VLAN. o The bitwise AND of PortMembers and NotAllowToJoin must be the empty set. o The bitwise OR of PortMembers and NotAllowToJoin must be the set of ports in the underlying STG of the VLAN. o The set of ports defined by StaticMembers must be a subset of the set of ports defined by PortMembers. o The bitwise XOR of PortMembers and StaticMembers defines the set of dynamic (potential) members of the VLAN. o The set of ports defined by ActiveMembers must be a subset of the set of ports defined by PortMembers.
1.3.6.1.4.1.2272.1.3.2.1not-accessiblecurrent
rcVlanId
OBJECT-TYPE
A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag.
1.3.6.1.4.1.2272.1.3.2.1.1Integer32 (1..4094)read-onlycurrent
rcVlanName
OBJECT-TYPE
An administratively-assigned name for this VLAN.
1.3.6.1.4.1.2272.1.3.2.1.2DisplayString (SIZE(0..64))read-createcurrent
rcVlanColor
OBJECT-TYPE
An administratively-assigned color code for this VLAN. The value of this object is used by the VLAN Manager GUI tool to select a color when it draws this VLAN on the screen.
1.3.6.1.4.1.2272.1.3.2.1.3Integer32 (0..32)read-createcurrent
rcVlanHighPriority
OBJECT-TYPE
A flag to note whether frames in this VLAN should be assigned a high switching priority.
1.3.6.1.4.1.2272.1.3.2.1.4TruthValueread-createdeprecated
rcVlanRoutingEnable
OBJECT-TYPE
A flag to note whether IP routing is enabled in this VLAN.
1.3.6.1.4.1.2272.1.3.2.1.5TruthValueread-createdeprecated
rcVlanIfIndex
OBJECT-TYPE
When rcVlanRoutingEnable is set to true(1), this value indicates the 'logical' ifIndex assigned to this VLAN. Otherwise, this value is meaningless and should be set to zero.
1.3.6.1.4.1.2272.1.3.2.1.6InterfaceIndexread-onlycurrent
rcVlanAction
OBJECT-TYPE
VLAN related actions.
1.3.6.1.4.1.2272.1.3.2.1.7INTEGER {none(1), flushMacFdb(2), flushArp(3), flushIp(4), flushDynMemb(5), all(6), flushSnoopMemb(7), triggerRipUpdate(8), flushSnoopMRtr(9), flushIpRsmltEdgePeer(10), flushWlanFdb(11)}read-createcurrent
rcVlanResult
OBJECT-TYPE
The result from the last VLAN action.
1.3.6.1.4.1.2272.1.3.2.1.8INTEGER {none(1), inProgress(2), success(3), fail(4)}read-onlycurrent
rcVlanStgId
OBJECT-TYPE
Indicates the Spanning Tree Group (STG) used by this VLAN to determine the state of its ports. If this VLAN is not associated with any STG, this value should be set to zero.
1.3.6.1.4.1.2272.1.3.2.1.9Integer32 (0..128)read-createcurrent
rcVlanType
OBJECT-TYPE
The type of VLAN, distinguished according to the policy used to define its port membership.
1.3.6.1.4.1.2272.1.3.2.1.10INTEGER {byPort(1), byIpSubnet(2), byProtocolId(3), bySrcMac(4), byDstMcast(5), bySvlan(6), byIds(7), byPortIp(8), byPortEvpn(9), byPortDefault(10), spbm-bvlan(11), spbm-switchedUni(12), private(13)}read-createcurrent
rcVlanPortMembers
OBJECT-TYPE
The set of ports that are members (static or dynamic) of this VLAN.
1.3.6.1.4.1.2272.1.3.2.1.11PortSetread-createcurrent
rcVlanActiveMembers
OBJECT-TYPE
The set of ports that are currently active in this VLAN. Active ports include all static ports and any dynamic ports where the VLAN policy was met.
1.3.6.1.4.1.2272.1.3.2.1.12PortSetread-onlycurrent
rcVlanStaticMembers
OBJECT-TYPE
The set of ports that are static members of this VLAN. A static member of a VLAN is always active and is never aged out.
1.3.6.1.4.1.2272.1.3.2.1.13PortSetread-createcurrent
rcVlanNotAllowToJoin
OBJECT-TYPE
The set of ports that are not allowed to become members of this VLAN.
1.3.6.1.4.1.2272.1.3.2.1.14PortSetread-createcurrent
rcVlanProtocolId
OBJECT-TYPE
The protocol identifier of this VLAN. This value is meaningful only if rcVlanType is equal to byProtocolId(3). For other VLAN types it should have the value none(0).
1.3.6.1.4.1.2272.1.3.2.1.15INTEGER {none(0), ip(1), ipx802dot3(2), ipx802dot2(3), ipxSnap(4), ipxEthernet2(5), appleTalk(6), decLat(7), decOther(8), sna802dot2(9), snaEthernet2(10), netBios(11), xns(12), vines(13), ipV6(14), usrDefined(15), rarp(16), pPPoE(17), arp(18)}read-createcurrent
rcVlanSubnetAddr
OBJECT-TYPE
The IP subnet address of this VLAN. This value is meaningful only if rcVlanType is equal to byIpSubnet(2). For other VLAN types it should have the value 0.0.0.0.
1.3.6.1.4.1.2272.1.3.2.1.16IpAddressread-createcurrent
rcVlanSubnetMask
OBJECT-TYPE
The IP subnet mask of this VLAN. This value is meaningful only if rcVlanType is equal to byIpSubnet(2). For other VLAN types it should have the value 0.0.0.0.
1.3.6.1.4.1.2272.1.3.2.1.17IpAddressread-createcurrent
rcVlanAgingTime
OBJECT-TYPE
The timeout period (in seconds) used for aging out dynamic members of this VLAN. This field is only relevant for policy-based VLANs.
1.3.6.1.4.1.2272.1.3.2.1.18Integer32 (0 | 10..1000000)read-createcurrent
rcVlanMacAddress
OBJECT-TYPE
The MAC address assigned to the virtual router interface of this VLAN. This field is meaningful only if rcVlanRoutingEnable is equal to true(1).
1.3.6.1.4.1.2272.1.3.2.1.19MacAddressread-onlycurrent
rcVlanRowStatus
OBJECT-TYPE
Used to create/delete entries in the rcVlanTable.
1.3.6.1.4.1.2272.1.3.2.1.20RowStatusread-createcurrent
rcVlanIgmpSnoopEnable
OBJECT-TYPE
A flag to note whether IGMP Snooping is enabled on this VLAN.
1.3.6.1.4.1.2272.1.3.2.1.21TruthValueread-createdeprecated
rcVlanIgmpSnoopReportProxyEnable
OBJECT-TYPE
A flag to note whether IGMP Report Proxy is enabled on this VLAN.
1.3.6.1.4.1.2272.1.3.2.1.22TruthValueread-createdeprecated
rcVlanIgmpSnoopRobustness
OBJECT-TYPE
This variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness variable may be increased. IGMP is robust to (Robustness - 1) packet losses.
1.3.6.1.4.1.2272.1.3.2.1.23Integer32 (1..255)read-createdeprecated
rcVlanIgmpSnoopQueryInterval
OBJECT-TYPE
The interval (in seconds) between IGMP Host-Query packets transmitted on this interface.
1.3.6.1.4.1.2272.1.3.2.1.24Integer32 (1..65535)read-createdeprecated
rcVlanIgmpSnoopMRouterPorts
OBJECT-TYPE
The set of ports in this VLAN that provide connectivity to an IP Multicast router.
1.3.6.1.4.1.2272.1.3.2.1.25PortSetread-createdeprecated
rcVlanUserDefinedPid
OBJECT-TYPE
When rcVlanProtocolId is set to usrDefined(15) in a protocol-based VLAN, this field represents the 16-bit user defined protocol identifier.
1.3.6.1.4.1.2272.1.3.2.1.26Integer32read-createcurrent
rcVlanIgmpSnoopActiveMRouterPorts
OBJECT-TYPE
Active ports.
1.3.6.1.4.1.2272.1.3.2.1.27PortSetread-onlydeprecated
rcVlanProtocolIds
OBJECT-TYPE
Bitfield of protocol ids.
1.3.6.1.4.1.2272.1.3.2.1.28Integer32read-createcurrent
rcVlanIgmpSnoopActiveQuerier
OBJECT-TYPE
IP address of multicast querier router.
1.3.6.1.4.1.2272.1.3.2.1.29IpAddressread-onlydeprecated
rcVlanIgmpSnoopMRouterExpiration
OBJECT-TYPE
Multicast querier router aging time out.
1.3.6.1.4.1.2272.1.3.2.1.30Integer32read-onlydeprecated
rcVlanIgmpSnoopQuerierPort
OBJECT-TYPE
The port on which the multicast querier router was heard.
1.3.6.1.4.1.2272.1.3.2.1.31InterfaceIndexOrZeroread-onlydeprecated
rcVlanUserPriority
OBJECT-TYPE
User priority level.
1.3.6.1.4.1.2272.1.3.2.1.32INTEGER {level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)}read-onlycurrent
rcVlanQosLevel
OBJECT-TYPE
Used to specify the Qos level packets, carried in this VLAN, should be processed with.
1.3.6.1.4.1.2272.1.3.2.1.33INTEGER {level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)}read-createcurrent
rcVlanTosValue
OBJECT-TYPE
Tos value.
1.3.6.1.4.1.2272.1.3.2.1.34Integer32 (1..64)read-createcurrent
rcVlanEncap
OBJECT-TYPE
This is the encapsulation type for userdefined protocol based vlans. This is not meaningful for other types of vlan. The default value is null.
1.3.6.1.4.1.2272.1.3.2.1.35INTEGER {ethernet2(1), llc(2), snap(3), all(4), notapplicable(5)}read-createcurrent
rcVlanFirewallVlanType
OBJECT-TYPE
This is the firewall vlan type for port based vlans.
1.3.6.1.4.1.2272.1.3.2.1.36INTEGER {none(1), naap(2), enforceable(3), peering(4)}read-createcurrent
rcVlanFdbAging
OBJECT-TYPE
The timeout required to.
1.3.6.1.4.1.2272.1.3.2.1.37Integer32 (10..1000000)read-createcurrent
rcVlanUpdateDynamicMacQosLevel
OBJECT-TYPE
It is used to indicate whether to update qos level for dynamic learned mac add resses associated with a subnet-based or protocol-based vlan when vlan qos level changes. If it is set to TRUE, qos level for all dynamic learned mac addresses will be changed upon changing vlan qos level. If it is set to DISABLE, once a mac address is learned, qos level will not updated when vlan qos level changes.
1.3.6.1.4.1.2272.1.3.2.1.38EnableValueread-createcurrent
rcVlanUserDefinedPidList
OBJECT-TYPE
A list of Protocol Id to usrDefined in a protocol-based VLAN, this field represents the list user defined protocol identifier.
1.3.6.1.4.1.2272.1.3.2.1.39OCTET STRING (SIZE(0..16))read-createcurrent
rcVlanIgmpVer1SnoopMRouterPorts
OBJECT-TYPE
The set of ports in this VLAN that provide connectivity to an IP Multicast router using IGMP Version 1.
1.3.6.1.4.1.2272.1.3.2.1.40PortSetread-createcurrent
rcVlanIgmpVer2SnoopMRouterPorts
OBJECT-TYPE
The set of ports in this VLAN that provide connectivity to an IP Multicast router using IGMP version 2.
1.3.6.1.4.1.2272.1.3.2.1.41PortSetread-createcurrent
rcVlanTlsIpmc
OBJECT-TYPE
Enable/disable the IP Mcast for this SP IP service Vlan for TLS OE feature
1.3.6.1.4.1.2272.1.3.2.1.42EnableValueread-createcurrent
rcVlanFirewallClusterId
OBJECT-TYPE
Firewall cluster Id
1.3.6.1.4.1.2272.1.3.2.1.43Integer32 (0..64)read-createcurrent
rcVlanOspfPassivePortMember
OBJECT-TYPE
The set of ports in the vlan that are designated as ospf passive.
1.3.6.1.4.1.2272.1.3.2.1.44PortSetread-createcurrent
rcVlanUnkDstMacDiscard
OBJECT-TYPE
Enable/disable Unknown Destination Mac Discard on Vlan
1.3.6.1.4.1.2272.1.3.2.1.45EnableValueread-createcurrent
rcVlanNlbMode
OBJECT-TYPE
Admin NLB mode set on a VLAN.
1.3.6.1.4.1.2272.1.3.2.1.46INTEGER {nlbAdminDisable(0), nlbAdminIgmpMcast(1), nlbAdminMulticast(2), nlbAdminUnicast(4)}read-createcurrent
rcVlanOperNlbMode
OBJECT-TYPE
Oper NLB mode of a VLAN.
1.3.6.1.4.1.2272.1.3.2.1.47INTEGER {nlbOperDisable(0), nlbOperIgmpMcast(1), nlbOperMulticast(2), nlbOperUnicast(4)}read-onlycurrent
rcVlanVrfId
OBJECT-TYPE
Indicates the Virtual Router to which the VLAN belongs
1.3.6.1.4.1.2272.1.3.2.1.48VrfIdentifierread-createcurrent
rcVlanVrfName
OBJECT-TYPE
The Name of the Virtual Router to which the VLAN belongs
1.3.6.1.4.1.2272.1.3.2.1.49DisplayString (SIZE(0..64))read-createcurrent
rcVlanMgmtVlan
OBJECT-TYPE
This displays the management vlan configuration
1.3.6.1.4.1.2272.1.3.2.1.50TruthValueread-onlycurrent
rcVlanApplyBtagEthertype
OBJECT-TYPE
Used to apply user configured btag ethertype to the Vlan
1.3.6.1.4.1.2272.1.3.2.1.51TruthValueread-createcurrent
rcVlanMmrp
OBJECT-TYPE
This displays the MMRP enable state for the vlan
1.3.6.1.4.1.2272.1.3.2.1.52EnableValueread-createcurrent
rcVlanSource
OBJECT-TYPE
This object indicates how this VLAN was created: static(1) - Indicates the VLAN was manually configured by an operator. dynamicMvmp(2) - Indicates the VLAN was dynamically created by MVMP (Mobility VLAN Management Protocol). dynamicGvrp(3) - Indicates the VLAN was dynamically created by GVRP.
1.3.6.1.4.1.2272.1.3.2.1.53INTEGER {static(1), dynamicMvmp(2), dynamicGvrp(3)}read-onlycurrent
rcVlanNodalMepList
OBJECT-TYPE
List of nodal Meps assigned to this vlan. A mep consists of Domain Name, Association name and Mep Id separated by '.'. Each meps is separated by ',': <md1>.<ma1>.<mepid1>,<md2>.<ma2>.<mepid2>,... The maximum number of nodal Mep for each vlan is 8.
1.3.6.1.4.1.2272.1.3.2.1.54OCTET STRING (SIZE(0..408))read-createcurrent
rcVlanNumOfNodalMep
OBJECT-TYPE
Number of nodal meps assigned to this vlan
1.3.6.1.4.1.2272.1.3.2.1.55Integer32 (0..8)read-onlycurrent
rcVlanNodalMipLevelList
OBJECT-TYPE
List of nodal Mip levels assigned to this vlan that allows Mip functionality to be enabled on a per level per vlan basis. A mip level is represented by an integer ranging from 0 to 7. The mip levels are separated by ',': <0...7>,<0...7>,... The maximum number of nodal Mip levels for each vlan is 8.
1.3.6.1.4.1.2272.1.3.2.1.56DisplayString (SIZE(0..16))read-createcurrent
rcVlanNumOfNodalMipLevel
OBJECT-TYPE
Number of nodal mip levels assigned to this vlan that allows MIP functionality to be enabled on a per level per vlan basis.
1.3.6.1.4.1.2272.1.3.2.1.57Integer32 (0..8)read-onlycurrent
rcVlanDhcpOption82Enabled
OBJECT-TYPE
This object is used to control whether DHCP option 82 is enabled for this VLAN.
1.3.6.1.4.1.2272.1.3.2.1.58TruthValueread-createcurrent
rcVlanIpMultinettingEnable
OBJECT-TYPE
Indicate if the vlan is an Ip Multinetting vlan. If enabled, rcVlanAssociatedIpMultinettingVlan should be set to 0
1.3.6.1.4.1.2272.1.3.2.1.59TruthValueread-writecurrent
rcVlanAssociatedIpMultinettingVlan
OBJECT-TYPE
Associated Ip Multinetting vlan Id whose rcVlanIpMultinettingEnable attribute is set
1.3.6.1.4.1.2272.1.3.2.1.60Integer32 (0..4095)read-writecurrent
rcVlanPlsbIsid
OBJECT-TYPE
Plsb i-sid number assigned to a C-vlan. Default 0 value indicates that no i-sid has been assinged.
1.3.6.1.4.1.2272.1.3.2.1.61Integer32 (0..16777215)read-writecurrent
rcVlanVoiceEnabled
OBJECT-TYPE
This object is used to control whether voice option is enabled for this VLAN.
1.3.6.1.4.1.2272.1.3.2.1.62TruthValueread-writecurrent
rcVlanRmonEnable
OBJECT-TYPE
Indicate if the vlan is enabled for Remote Monitoring
1.3.6.1.4.1.2272.1.3.2.1.63TruthValueread-writecurrent
rcVlanIpsecEnable
OBJECT-TYPE
Indicate if the vlan is enabled for IPSEC
1.3.6.1.4.1.2272.1.3.2.1.64TruthValueread-writecurrent
rcVlanLPortMembers
OBJECT-TYPE
The set of logical ports that are members (dynamic) of this VLAN.
1.3.6.1.4.1.2272.1.3.2.1.65LPortSetread-onlycurrent
rcVlanLPortActiveMembers
OBJECT-TYPE
The set of logical ports that are currently active in this VLAN. Active ports include all dynamic ports where the VLAN policy was met.
1.3.6.1.4.1.2272.1.3.2.1.66LPortSetread-onlycurrent
rcVlanLPortStaticMembers
OBJECT-TYPE
The set of logical ports that are static members of this VLAN. A static member of a VLAN is always active and is never aged out.
1.3.6.1.4.1.2272.1.3.2.1.67LPortSetread-onlycurrent
rcVlanLPortNotAllowToJoin
OBJECT-TYPE
The set of logical ports that are not allowed to become members of this VLAN.
1.3.6.1.4.1.2272.1.3.2.1.68LPortSetread-onlycurrent
rcVlanRspanEnabled
OBJECT-TYPE
This object is used to control whether rspan option is enabled for this VLAN.
1.3.6.1.4.1.2272.1.3.2.1.69TruthValueread-writecurrent
rcVlanSpbMcast
OBJECT-TYPE
Enable/disable SPB multicast on Vlan
1.3.6.1.4.1.2272.1.3.2.1.70EnableValueread-writecurrent
rcVlanSecondaryVlanId
OBJECT-TYPE
A value that uniquely identifies the secondary Virtual LAN associated with the primary private VLAN. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag.
1.3.6.1.4.1.2272.1.3.2.1.71RcVlanIdOrNoneread-writecurrent
rcVlanSecondaryIsid
OBJECT-TYPE
The i-sid number assigned to a secondary VLAN if it exists. Default 0 value.
1.3.6.1.4.1.2272.1.3.2.1.72Integer32 (0..16777215)read-writecurrent
rcVlanPortTable
OBJECT-TYPE
A table used to maintain VLAN port related information.
1.3.6.1.4.1.2272.1.3.3not-accessiblecurrent
rcVlanPortEntry
OBJECT-TYPE
Entry containing VLAN information regarding a particular port.
1.3.6.1.4.1.2272.1.3.3.1not-accessiblecurrent
rcVlanPortIndex
OBJECT-TYPE
An unique index used to identify a particular port in the system. This index is equal to the ifIndex of the port.
1.3.6.1.4.1.2272.1.3.3.1.1Integer32 (0..2147483647)read-onlycurrent
rcVlanPortNumVlanIds
OBJECT-TYPE
Used to indicate the number of VLAN IDs that are stored in the rcVlanPortVlanIds variable.
1.3.6.1.4.1.2272.1.3.3.1.2Integer32read-onlycurrent
rcVlanPortVlanIds
OBJECT-TYPE
An array used to identify which VLANs this port is assigned to. Each VLAN ID is stored as a two octet value. The first octet in the pair holds bits 15-8 of the VLAN ID, while the second octet holds bits 7-0 of the VLAN ID.
1.3.6.1.4.1.2272.1.3.3.1.3IdList (SIZE(0..4096))read-writecurrent
rcVlanPortType
OBJECT-TYPE
The type of port: access(1) or trunk(2).
1.3.6.1.4.1.2272.1.3.3.1.4INTEGER {access(1), trunk(2)}read-writecurrent
rcVlanPortDiscardTaggedFrames
OBJECT-TYPE
A flag used to determine how to process tagged frames received on this access port. When the flag is set, these frames are discarded by the forwarding process. When the flag is reset, these frames are processed normally. This field is meaningless when the port is not an access port and should be set to false(2).
1.3.6.1.4.1.2272.1.3.3.1.5TruthValueread-writecurrent
rcVlanPortDiscardUntaggedFrames
OBJECT-TYPE
A flag used to determine how to process untagged frames received on this trunk port. When the flag is set, these frames are discarded by the forwarding process. When the flag is reset, these frames are assigned to the VLAN specified by rcVlanPortDefaultVlanId. This field is meaningless when the port is not a trunk port and should be set to false(2).
1.3.6.1.4.1.2272.1.3.3.1.6TruthValueread-writecurrent
rcVlanPortDefaultVlanId
OBJECT-TYPE
The VLAN ID assigned to untagged frames received on this trunk port. This field is meaningless when the port is not a trunk port.
1.3.6.1.4.1.2272.1.3.3.1.7Integer32 (0..4094)read-writecurrent
rcVlanPortPerformTagging
OBJECT-TYPE
Enable/disable the port on the current vlan to perform tagging on the incoming and outgoing traffic.
1.3.6.1.4.1.2272.1.3.3.1.8INTEGER {true(1), false(2), tagPvidOnly(3), untagPvidOnly(4)}read-writecurrent
rcVlanPortSVlanPortType
OBJECT-TYPE
The type of port.
1.3.6.1.4.1.2272.1.3.3.1.9INTEGER {normal(1), uni(2), nni(3)}read-writecurrent
rcVlanPortLoopDetect
OBJECT-TYPE
Enable/disable loop detection on this port
1.3.6.1.4.1.2272.1.3.3.1.10TruthValueread-writecurrent
rcVlanPortFirstPortInOpid
OBJECT-TYPE
This value gives the IfIndex of the first port in the octapid. This value is used to generate an error message when changing port type from normal to uni/nni and viceversa
1.3.6.1.4.1.2272.1.3.3.1.11InterfaceIndexread-onlycurrent
rcVlanPortLastPortInOpid
OBJECT-TYPE
This value gives the IfIndex of the first port in the octapid. This value is used to generate an error message when changing port type from normal to uni/nni and viceversa
1.3.6.1.4.1.2272.1.3.3.1.12InterfaceIndexread-onlycurrent
rcVlanPortUntagDefaultVlan
OBJECT-TYPE
enable/disable Egress Tagging on the Default Vlan of the port.
1.3.6.1.4.1.2272.1.3.3.1.13TruthValueread-writecurrent
rcVlanPortLoopDetectAction
OBJECT-TYPE
This value is used to specify the action which needs to be taken once a loop is detected on a specific port.
1.3.6.1.4.1.2272.1.3.3.1.14INTEGER {portDown(1), vlanBlock(2), macDiscard(3)}read-writecurrent
rcVlanPortArpDetect
OBJECT-TYPE
Enable/disable Arp detection on this port
1.3.6.1.4.1.2272.1.3.3.1.15TruthValueread-writecurrent
rcVlanPortSpoofDetect
OBJECT-TYPE
Enable/disable spoof detection on this port
1.3.6.1.4.1.2272.1.3.3.1.16TruthValueread-writecurrent
rcVlanPortRemarking
OBJECT-TYPE
Enable/disable remarking on this port
1.3.6.1.4.1.2272.1.3.3.1.17TruthValueread-writecurrent
rcVlanPortClassificationSubnet
OBJECT-TYPE
Enable/disable Subnet based Vlan packets on this port.
1.3.6.1.4.1.2272.1.3.3.1.18TruthValueread-writecurrent
rcVlanPortClassificationProtocol
OBJECT-TYPE
Enable/disable Protocol based Vlan packets on this port.
1.3.6.1.4.1.2272.1.3.3.1.19TruthValueread-writecurrent
rcVlanPortClassificationPrec
OBJECT-TYPE
Sets the precedence for vlan classification. A value of 1 puts classification of packets to source mac vlans ahead of subnet based vlans. A value of 2 puts subnet based vlans ahead of source mac vlans. Classification to other types of vlans is unaffected as it occurs following source mac and subnet based vlans.
1.3.6.1.4.1.2272.1.3.3.1.20INTEGER {sourceMac(1), subnet(2)}read-writecurrent
rcVlanPortVlanIdList
OBJECT-TYPE
This bitfield is used to identify which VLANs this port is assigned to. Each VLAN ID is stored as a bit. The most-significant (left-most) bit represents Vlan Id 1.
1.3.6.1.4.1.2272.1.3.3.1.21OCTET STRING (SIZE(0..512))read-writecurrent
rcVlanPortClassificationSourceMac
OBJECT-TYPE
Enable/disable SourceMac based Vlan packets on this port.
1.3.6.1.4.1.2272.1.3.3.1.22TruthValueread-writecurrent
rcVlanPortPrivateVlanPortType
OBJECT-TYPE
The type of port associated wiht private VLAN. If the VLAN is not private then this is ignored. If the VLAN is private then the value must be either trunk, isolated, or promiscuous. Setting the value to trunk will enable tagging. Setting the value to isolated or promiscuous will remove non-private VLANs from the port.
1.3.6.1.4.1.2272.1.3.3.1.23INTEGER {trunk(1), isolated(2), promiscuous(3), none(4)}read-writecurrent
rcVlanMacTable
OBJECT-TYPE
A table used to maintain MAC addresses assigned to a particular VLAN by MAC address.
1.3.6.1.4.1.2272.1.3.4not-accessiblecurrent
rcVlanMacEntry
OBJECT-TYPE
Entry containing VLAN information regarding a particular port.
1.3.6.1.4.1.2272.1.3.4.1not-accessiblecurrent
rcVlanMacVlanId
OBJECT-TYPE
An unique index used to identify a VLAN (by MAC address) in the system.
1.3.6.1.4.1.2272.1.3.4.1.1Integer32 (0..2147483647)read-onlycurrent
rcVlanMacAddr
OBJECT-TYPE
An unique index used to identify a MAC address assigned to a particular VLAN.
1.3.6.1.4.1.2272.1.3.4.1.2MacAddressread-onlycurrent
rcVlanMacRowStatus
OBJECT-TYPE
Row status for this entry.
1.3.6.1.4.1.2272.1.3.4.1.3RowStatusread-createcurrent
rcVlanIgmpSnoopNumGroups
OBJECT-TYPE
The number of entries (rows) in the rcVlanIgmpSnoopTable.
1.3.6.1.4.1.2272.1.3.5Integer32read-onlycurrent
rcVlanIgmpSnoopTable
OBJECT-TYPE
The (conceptual) table listing the IP multicast groups for which there are members on a particular interface on a particular VLAN (i.e., a list known multicast receivers). A row is created by the system when it receives an IGMP Join messages on a port.
1.3.6.1.4.1.2272.1.3.6not-accessibledeprecated
rcVlanIgmpSnoopEntry
OBJECT-TYPE
An entry (row) in the rcVlanIgmpSnoopTable.
1.3.6.1.4.1.2272.1.3.6.1not-accessibledeprecated
rcVlanIgmpSnoopVlanId
OBJECT-TYPE
The VLAN for which this entry contains information.
1.3.6.1.4.1.2272.1.3.6.1.1Integer32 (1..4094)read-onlydeprecated
rcVlanIgmpSnoopIpAddress
OBJECT-TYPE
The IP multicast group address for which this entry contains information.
1.3.6.1.4.1.2272.1.3.6.1.2IpAddressread-onlydeprecated
rcVlanIgmpSnoopIfIndex
OBJECT-TYPE
The interface for which this entry contains information for this IP multicast group address (i.e., the port the Join message was received).
1.3.6.1.4.1.2272.1.3.6.1.3InterfaceIndexread-onlydeprecated
rcVlanIgmpSnoopMember
OBJECT-TYPE
The IP Address of the source of the membership report received for this IP Multicast group address on this interface (i.e., the address of the host sending the Join message).
1.3.6.1.4.1.2272.1.3.6.1.4IpAddressread-onlydeprecated
rcVlanIgmpSnoopExpiration
OBJECT-TYPE
The minimum amount of time remaining before this entry will be aged out.
1.3.6.1.4.1.2272.1.3.6.1.5Integer32read-onlydeprecated
rcVlanIgmpSnoopType
OBJECT-TYPE
The type of entry: dynamic(1) entries are created by snooping IGMP messages, static(2) entries are created via management.
1.3.6.1.4.1.2272.1.3.6.1.6INTEGER {dynamic(1), static(2), blocked(3)}read-onlydeprecated
rcVlanIgmpSnoopStaticTable
OBJECT-TYPE
The (conceptual) table listing the statically- defined IP multicast groups for which there are members on a particular interface on a particular VLAN.
1.3.6.1.4.1.2272.1.3.7not-accessibledeprecated
rcVlanIgmpSnoopStaticEntry
OBJECT-TYPE
An entry (row) in the rcVlanIgmpSnoopStaticTable.
1.3.6.1.4.1.2272.1.3.7.1not-accessibledeprecated
rcVlanIgmpSnoopStaticVlanId
OBJECT-TYPE
The VLAN for which this entry contains information.
1.3.6.1.4.1.2272.1.3.7.1.1Integer32 (1..4094)read-onlydeprecated
rcVlanIgmpSnoopStaticIpAddress
OBJECT-TYPE
The IP multicast group address for which this entry contains information. The address must fall within 224.0.1.0 to 239.255.255.255.
1.3.6.1.4.1.2272.1.3.7.1.2IpAddressread-onlydeprecated
rcVlanIgmpSnoopStaticMemberPorts
OBJECT-TYPE
The set of ports in this VLAN multicast traffic for the rcVlanIgmpSnoopStaticIpAddress is to be forwarded to.
1.3.6.1.4.1.2272.1.3.7.1.3PortSetread-createdeprecated
rcVlanIgmpSnoopStaticRowStatus
OBJECT-TYPE
Used to create/delete entries in the rcVlanIgmpSnoopStaticTable.
1.3.6.1.4.1.2272.1.3.7.1.4RowStatusread-createdeprecated
rcVlanIgmpSnoopStaticNotAllowedToJoin
OBJECT-TYPE
Not allowed to join
1.3.6.1.4.1.2272.1.3.7.1.5PortSetread-createdeprecated
rcVlanIgmpSnoopAccessTable
OBJECT-TYPE
Table used to specify which host(s) can send and/or receive IP Multicast traffic.
1.3.6.1.4.1.2272.1.3.8not-accessibledeprecated
rcVlanIgmpSnoopAccessEntry
OBJECT-TYPE
An entry (row) in the rcVlanIgmpSnoopAccessTable.
1.3.6.1.4.1.2272.1.3.8.1not-accessibledeprecated
rcVlanIgmpSnoopAccessVlanId
OBJECT-TYPE
The VLAN for which this entry contains information.
1.3.6.1.4.1.2272.1.3.8.1.1Integer32 (1..4094)read-onlydeprecated
rcVlanIgmpSnoopAccessGrpAddr
OBJECT-TYPE
The IP multicast group address for which this entry contains information.
1.3.6.1.4.1.2272.1.3.8.1.2IpAddressread-onlydeprecated
rcVlanIgmpSnoopAccessHostAddr
OBJECT-TYPE
The IP address of a host for which this entry contains information.
1.3.6.1.4.1.2272.1.3.8.1.3IpAddressread-onlydeprecated
rcVlanIgmpSnoopAccessHostMask
OBJECT-TYPE
The IP netmask of a host for which this entry contains information.
1.3.6.1.4.1.2272.1.3.8.1.4IpAddressread-onlydeprecated
rcVlanIgmpSnoopAccessMode
OBJECT-TYPE
Used to specify whether the host identified by rcVlanIgmpSnoopAccessHostAddr should be denied IP multicast transmit, receive, or both.
1.3.6.1.4.1.2272.1.3.8.1.5INTEGER {denyTx(1), denyRx(2), denyBoth(3)}read-createdeprecated
rcVlanIgmpSnoopAccessRowStatus
OBJECT-TYPE
Row status
1.3.6.1.4.1.2272.1.3.8.1.6RowStatusread-createdeprecated
rcVlanIgmpSnoopSenderTable
OBJECT-TYPE
The (conceptual) table listing the IP multicast groups for which there are members on a particular interface on a particular VLAN (i.e., a list known multicast senders). A row is created by the system when it receives an IGMP Join messages on a port.
1.3.6.1.4.1.2272.1.3.9not-accessibledeprecated
rcVlanIgmpSnoopSenderEntry
OBJECT-TYPE
An entry (row) in the rcVlanIgmpSnoopSenderTable.
1.3.6.1.4.1.2272.1.3.9.1not-accessibledeprecated
rcVlanIgmpSnoopSenderVlanId
OBJECT-TYPE
The VLAN for which this entry contains information.
1.3.6.1.4.1.2272.1.3.9.1.1Integer32 (1..4094)read-onlydeprecated
rcVlanIgmpSnoopSenderIpAddress
OBJECT-TYPE
The IP multicast group address for which this entry contains information.
1.3.6.1.4.1.2272.1.3.9.1.2IpAddressread-onlydeprecated
rcVlanIgmpSnoopSenderIfIndex
OBJECT-TYPE
The interface for which this entry contains information for this IP multicast group address (i.e., the port the multicast traffic was received).
1.3.6.1.4.1.2272.1.3.9.1.3InterfaceIndexread-onlydeprecated
rcVlanIgmpSnoopSenderMember
OBJECT-TYPE
The IP Address of the host sending the multicast traffic.
1.3.6.1.4.1.2272.1.3.9.1.4IpAddressread-onlydeprecated
rcVlanIgmpSnoopSenderAction
OBJECT-TYPE
Used to specify an action to perform on this group.
1.3.6.1.4.1.2272.1.3.9.1.5INTEGER {none(0), flushEntry(1), flushGrp(2)}read-writedeprecated
rcVlanLoopDetectedTable
OBJECT-TYPE
A list of Vlans the port belongs to and the corresponding loop detected status.
1.3.6.1.4.1.2272.1.3.10not-accessiblecurrent
rcVlanLoopDetectedEntry
OBJECT-TYPE
Loop-Detected Entry.
1.3.6.1.4.1.2272.1.3.10.1not-accessiblecurrent
rcVlanLoopDetectedPortIndex
OBJECT-TYPE
Port Number.
1.3.6.1.4.1.2272.1.3.10.1.1Integer32 (0..2147483647)read-onlycurrent
rcVlanLoopDetectedVlanId
OBJECT-TYPE
Gives the VlanId to which the port belongs.
1.3.6.1.4.1.2272.1.3.10.1.2Integer32 (0..2147483647)read-onlycurrent
rcVlanLoopDetectedValue
OBJECT-TYPE
Gives the Loop Detected status of the port in a vlan.
1.3.6.1.4.1.2272.1.3.10.1.3INTEGER {no(0), yes(1)}read-onlycurrent
rcVlanDsapSsapTable
OBJECT-TYPE
A table used to maintain DSAP/SSAP values assigned to a sna802dot2 or userdefined vlan.
1.3.6.1.4.1.2272.1.3.11not-accessiblecurrent
rcVlanDsapSsapEntry
OBJECT-TYPE
An entry in the rcVlanDsapSsap table.
1.3.6.1.4.1.2272.1.3.11.1not-accessiblecurrent
rcVlanDsapSsapVlanId
OBJECT-TYPE
A unique index to identify a vlan.
1.3.6.1.4.1.2272.1.3.11.1.1Integer32 (0..2147483647)not-accessiblecurrent
rcVlanDsapSsapPid
OBJECT-TYPE
Values of DSAP/SSAP assigned to a particular vlan.
1.3.6.1.4.1.2272.1.3.11.1.2Integer32 (0..65535)not-accessiblecurrent
rcVlanDsapSsapRowStatus
OBJECT-TYPE
Row Status.
1.3.6.1.4.1.2272.1.3.11.1.3RowStatusread-createcurrent
rcVlanNewLoopDetectedTable
OBJECT-TYPE
A list of Vlans the port belongs to and the corresponding loop detected status.
1.3.6.1.4.1.2272.1.3.12not-accessiblecurrent
rcVlanNewLoopDetectedEntry
OBJECT-TYPE
Loop-Detected Entry.
1.3.6.1.4.1.2272.1.3.12.1not-accessiblecurrent
rcVlanNewLoopDetectedPortIndex
OBJECT-TYPE
Port Number.
1.3.6.1.4.1.2272.1.3.12.1.1InterfaceIndexnot-accessiblecurrent
rcVlanNewLoopDetectedVlanId
OBJECT-TYPE
Gives the VlanId to which the port belongs.
1.3.6.1.4.1.2272.1.3.12.1.2Integer32 (0..2147483647)not-accessiblecurrent
rcVlanNewLoopDetectedMac
OBJECT-TYPE
Mac address
1.3.6.1.4.1.2272.1.3.12.1.3MacAddressnot-accessiblecurrent
rcVlanNewLoopDetectedAction
OBJECT-TYPE
This value is used to specify the action which needs to be taken once a loop is detected on a specific port.
1.3.6.1.4.1.2272.1.3.12.1.4INTEGER {portDown(1), vlanBlock(2), macDiscard(3)}read-onlycurrent
rcVlanNewLoopDetectedSmltRemote
OBJECT-TYPE
A MAC address indicate for remote learnt, either local or remote.
1.3.6.1.4.1.2272.1.3.12.1.5TruthValueread-onlycurrent
rcVlanPortCfmMepTable
OBJECT-TYPE
A table used to maintain CFM MEP assigned to the port in a vlan
1.3.6.1.4.1.2272.1.3.13not-accessiblecurrent
rcVlanPortCfmMepEntry
OBJECT-TYPE
An entry in the rcVlanPortCfmMep table.
1.3.6.1.4.1.2272.1.3.13.1not-accessiblecurrent
rcVlanPortCfmMepVlanId
OBJECT-TYPE
A unique index to identify a vlan.
1.3.6.1.4.1.2272.1.3.13.1.1Integer32 (1..4094)not-accessiblecurrent
rcVlanPortCfmMepPort
OBJECT-TYPE
A unique index to identify a port interface in a Vlan.
1.3.6.1.4.1.2272.1.3.13.1.2InterfaceIndexnot-accessiblecurrent
rcVlanPortCfmMepMepList
OBJECT-TYPE
List of Meps assigned to this entry. A mep is consist of <md>.<ma>.<mep_id>. Domain Name, Association and Mep Id is separated by '.' A list of mep is consist of <md1>.<ma1>.<mepid1>,<md2>.<ma2>.<mepid2>,... Each mep is separated by ','. Maximum up 8 meps
1.3.6.1.4.1.2272.1.3.13.1.3OCTET STRING (SIZE(0..440))read-createcurrent
rcVlanPortCfmMepNumOfMep
OBJECT-TYPE
Used to indicate the number of Meps is assigned to this entry
1.3.6.1.4.1.2272.1.3.13.1.4Integer32read-onlycurrent
rcVlanPortCfmMepRowStatus
OBJECT-TYPE
Row Create attibute. For perfomace and efficience, rcVlanPortCfmMepMepList is required for creation. If any Mep is added, entry would be created. If all Mep are removed, entry would be deleted
1.3.6.1.4.1.2272.1.3.13.1.5RowStatusread-createcurrent
rcVlanPortCfmMipTable
OBJECT-TYPE
A table used to maintain CFM MIP assigned to the port in a vlan
1.3.6.1.4.1.2272.1.3.14not-accessiblecurrent
rcVlanPortCfmMipEntry
OBJECT-TYPE
An entry in the rcVlanPortCfmMip table.
1.3.6.1.4.1.2272.1.3.14.1not-accessiblecurrent
rcVlanPortCfmMipVlanId
OBJECT-TYPE
A unique index to identify a vlan.
1.3.6.1.4.1.2272.1.3.14.1.1Integer32 (1..4094)not-accessiblecurrent
rcVlanPortCfmMipPort
OBJECT-TYPE
A unique index to identify a port interface in a Vlan.
1.3.6.1.4.1.2272.1.3.14.1.2InterfaceIndexnot-accessiblecurrent
rcVlanPortCfmMipMipList
OBJECT-TYPE
List of Mips assigned to this entry. A mip is consist of <md>.<mip_id>. Domain Name and Mip Id is separated by '.' A list of mip is consist of <md1>.<mipid1>,<md2>.<mipid2>,... Each mip is separated by ','. Maximum up 8 mips
1.3.6.1.4.1.2272.1.3.14.1.3OCTET STRING (SIZE(0..440))read-createcurrent
rcVlanPortCfmMipNumOfMip
OBJECT-TYPE
Used to indicate the number of Mips is assigned to this entry
1.3.6.1.4.1.2272.1.3.14.1.4Integer32read-onlycurrent
rcVlanPortCfmMipRowStatus
OBJECT-TYPE
Row Create attibute. For perfomace and efficience, rcVlanPortCfmMipMipList is required for creation. If any Mip is added, entry would be created. If all Mip are removed, entry would be deleted
1.3.6.1.4.1.2272.1.3.14.1.5RowStatusread-createcurrent
rcVlanExtFilterSvcTable
OBJECT-TYPE
Extended filtering services per port per Vlans are defined in this table
1.3.6.1.4.1.2272.1.3.15not-accessiblecurrent
rcVlanExtFilterSvcEntry
OBJECT-TYPE
Used to indicate the extended filtering services. Extended filtering services are per port per Vlan.
1.3.6.1.4.1.2272.1.3.15.1not-accessiblecurrent
rcVlanExtFilterSvcVlanId
OBJECT-TYPE
A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag.
1.3.6.1.4.1.2272.1.3.15.1.1Integer32 (1..4094)not-accessiblecurrent
rcVlanExtFilterSvcFwdAllPorts
OBJECT-TYPE
Contains port list that are in ForwardAll mode.
1.3.6.1.4.1.2272.1.3.15.1.2PortSetread-writecurrent
rcVlanExtFilterSvcFwdUnregPorts
OBJECT-TYPE
Contains port list that are in Forward Unregistered mode.
1.3.6.1.4.1.2272.1.3.15.1.3PortSetread-writecurrent
rcVlanExtFilterSvcFilterUnregPorts
OBJECT-TYPE
Contains port list that are in Filter Unregistered mode.
1.3.6.1.4.1.2272.1.3.15.1.4PortSetread-writecurrent
rcVlanPortSpoofDetectTable
OBJECT-TYPE
Table containing spoof-detect block entries.
1.3.6.1.4.1.2272.1.3.16not-accessiblecurrent
rcVlanPortSpoofDetectEntry
OBJECT-TYPE
This entry, which contains port index, VLAN ID, IP address and MAC address, is used to indicate which MAC address is starting IP-Spoof attack and which gateway IP address is under attack.
1.3.6.1.4.1.2272.1.3.16.1not-accessiblecurrent
rcVlanPortSpoofDetectIndex
OBJECT-TYPE
The auxiliary variable for identifying instances of the columnar objects in the spoof detect table.
1.3.6.1.4.1.2272.1.3.16.1.1Unsigned32not-accessiblecurrent
rcVlanPortSpoofDetectSpoofedIpAddressType
OBJECT-TYPE
IP address type of address under spoof attack.
1.3.6.1.4.1.2272.1.3.16.1.2InetAddressTyperead-onlycurrent
rcVlanPortSpoofDetectSpoofedIpAddress
OBJECT-TYPE
IP address that has been detected under spoof attack.
1.3.6.1.4.1.2272.1.3.16.1.3InetAddressread-onlycurrent
rcVlanPortSpoofDetectSpoofedMacAddress
OBJECT-TYPE
MAC address that has sent out spoofing ARP.
1.3.6.1.4.1.2272.1.3.16.1.4MacAddressread-onlycurrent
rcVlanPortSpoofDetectPort
OBJECT-TYPE
Port index that has enabled spoof-detect.
1.3.6.1.4.1.2272.1.3.16.1.5Unsigned32read-onlycurrent
rcVlanPortSpoofDetectVlanId
OBJECT-TYPE
VLAN ID that has been detected under spoof attack.
1.3.6.1.4.1.2272.1.3.16.1.6Unsigned32read-onlycurrent
rcVlanClearMacRecordTable
OBJECT-TYPE
Table used to clear a Vlan MAC Record.
1.3.6.1.4.1.2272.1.3.17not-accessiblecurrent
rcVlanClearMacRecordEntry
OBJECT-TYPE
Vlan Clear Mac Record Table Entry
1.3.6.1.4.1.2272.1.3.17.1not-accessiblecurrent
rcVlanClearMacRecordAddr
OBJECT-TYPE
Mac Address that needs to be cleared.
1.3.6.1.4.1.2272.1.3.17.1.1MacAddressnot-accessiblecurrent
rcVlanClearMacRecordVlanId
OBJECT-TYPE
Vlan Id where the Mac record has to be cleared.
1.3.6.1.4.1.2272.1.3.17.1.2INTEGER (1..4094)read-writecurrent
rcVlanClearMacRecordAllVlanIds
OBJECT-TYPE
When set to true, this will clear the MAC record on all the Vlan Ids it exists.
1.3.6.1.4.1.2272.1.3.17.1.3TruthValueread-writecurrent
rcVlanClearMacRecordForceDelete
OBJECT-TYPE
By default, when ForceDelete is set to false, MAC record will not be cleared if an ARP record is associated with this Mac Address. If ForceDelete is set to True, MAC record will be removed even when an ARP is associated with this record.
1.3.6.1.4.1.2272.1.3.17.1.4TruthValueread-writecurrent
rcVlanClearMacRecordLCForceDelete
OBJECT-TYPE
By default, when LCForceDelete (Line Card Force Delete) is set to false, if the MAC record is not found on the CP, then no message will be sent to the line-card. When LCForceDelete is set to true, a message will be sent to the line-card even when the MAC record is not found on the CP.
1.3.6.1.4.1.2272.1.3.17.1.5TruthValueread-writecurrent
rcSvlanGlobal
OBJECT-IDENTITY
1.3.6.1.4.1.2272.1.35.1
rcSvlanActiveLevel
OBJECT-TYPE
Stacked Vlan active level.
1.3.6.1.4.1.2272.1.35.1.1Integer32 (0..7)read-writecurrent
rcSvlanTable
OBJECT-TYPE
A list of possible levels and their corresponding ether type. The number of entries is eight.
1.3.6.1.4.1.2272.1.35.2not-accessiblecurrent
rcSvlanEntry
OBJECT-TYPE
A Stacked Vlan table entry.
1.3.6.1.4.1.2272.1.35.2.1not-accessiblecurrent
rcSvlanId
OBJECT-TYPE
Row Index.
1.3.6.1.4.1.2272.1.35.2.1.1Integer32 (1..8)read-onlycurrent
rcSvlanLevel
OBJECT-TYPE
A value that identifies the switch level associated with this entry.
1.3.6.1.4.1.2272.1.35.2.1.2Integer32read-onlycurrent
rcSvlanEtherType
OBJECT-TYPE
The ether type value is used for svlan tagging.
1.3.6.1.4.1.2272.1.35.2.1.3Integer32read-writecurrent