PW-STD-MIB
- Registered at
- 1.3.6.1.2.1.10.246
- Last updated
- 2009-06-11 00:00
- Organization
- Pseudowire Edge-to-Edge Emulation (PWE3) Working Group
- Revisions
- 2009-06-11 00:00
- Namespace
- standard
- Source file
PW-STD-MIB- Digest
sha256:8c22e5d21870eb1c4481b859bb3d88dc16df146401699d4fc940a8d6851bb8cc
Description
This MIB module contains managed object definitions for pseudowire operation as in Bryant, S. and P. Pate, 'Pseudo Wire Emulation Edge-to-Edge (PWE3) Architecture' [RFC3985], Martini, L., et al, 'Pseudowire Setup and Maintenance Using the Label Distribution Protocol (LDP)' [RFC4447], and Townsley, M., et al, 'Layer Two Tunneling Protocol (Version 3)' [RFC3931]. This MIB module enables the use of any underlying packet switched network (PSN). MIB nodules that will support PW operations over specific PSN types are defined in separate memos. The indexes for this MIB module are also used to index the PSN-specific tables and the PW-specific tables. The PW Type dictates which PW-specific MIB module to use. Copyright (c) 2009 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - Neither the name of Internet Society, IETF or IETF Trust, nor the names of specific contributors, may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This version of this MIB module is part of RFC 5601; see the RFC itself for full legal notices.
Contact
David Zelig Email: davidz@oversi.com Thomas D. Nadeau Email: tom.nadeau@bt.com The PWE3 Working Group (email distribution pwe3@ietf.org, http://www.ietf.org/html.charters/pwe3-charter.html)
Imports
| From | Symbols |
|---|---|
| HC-PerfHist-TC-MIB | HCPerfCurrentCount, HCPerfIntervalCount, HCPerfTimeElapsed, HCPerfValidIntervals |
| IANA-PWE3-MIB | IANAPwCapabilities, IANAPwPsnTypeTC, IANAPwTypeTC |
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| PW-TC-STD-MIB | PwAttachmentIdentifierType, PwCwStatusTC, PwFragSize, PwFragStatus, PwGenIdType, PwGroupID, PwIDType, PwIndexOrZeroType, PwIndexType, PwOperStatusTC, PwStatus |
| PerfHist-TC-MIB | PerfCurrentCount, PerfIntervalCount |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Counter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, transmission |
| SNMPv2-TC | DisplayString, RowStatus, StorageType, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HC-PerfHist-TC-MIB IANA-PWE3-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB PW-STD-MIB PW-TC-STD-MIB PerfHist-TC-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| pwNotifications OBJECT-IDENTITY | 1.3.6.1.2.1.10.246.0 | |||
| pwObjects OBJECT-IDENTITY | 1.3.6.1.2.1.10.246.1 | |||
| pwIndexNext OBJECT-TYPE This object contains an appropriate value to be used for pwIndex when creating entries in the pwTable. The value 0 indicates that no unassigned entries are available. To obtain the value of pwIndex for a new entry in the pwTable, the manager issues a management protocol retrieval operation. The agent will determine through its local policy when this index value will be made available for reuse. | 1.3.6.1.2.1.10.246.1.1 | Unsigned32 | read-only | current |
| pwTable OBJECT-TYPE This table specifies information for configuring and status monitoring that is common to all service types and PSN types. | 1.3.6.1.2.1.10.246.1.2 | not-accessible | current | |
| pwEntry OBJECT-TYPE A row in this table represents a pseudowire (PW) virtual connection across a packet network. It is indexed by pwIndex, which uniquely identifies a singular connection. A row can be created by an operator command from a management plan of a PE, by signaling, or due to auto- discovery process. An operator's command can be issued via a non-SNMP application; in such case, a row will be created implicitly by the agent. The read-create objects in this table are divided into three categories: 1) Objects that MUST NOT be changed after row activation. These are objects that define basic properties of the PW (for example type, destination, etc.). 2) Objects that MAY be changed when the PW is defined as not active. A change of these objects involves re-signaling of the PW or it might be traffic affecting. PW not active is defined as one of the following conditions: a) The pwRowStatus is notInService(2). b) The pwRowStatus is notReady(3). c) The pwAdminStatus is down(2). If the operator needs to change one of the values for an active row, the operator can either set the pwRowStatus to notInService(2) or set pwAdminStatus to down(2). Signaling (or traffic) is initiated again upon setting the pwRowStatus to active(1) or setting the pwAdminStatus to up(1) or testing(3), respectively. 3) Objects that MAY be changed at any time. A PW MAY have an entry in the ifTable in addition to the entry in this table. In this case, a special ifType for PW will be set in the ifTable, and the ifIndex in the ifTable of the PW will be set in the pwIfIndex object in this table. By default, all the read-create objects MUST NOT be changed after row activation, unless specifically indicated in the individual object description. Manual entries in this table SHOULD be preserved after a reboot; the agent MUST ensure the integrity of those entries. If the set of entries of a specific row are found to be inconsistent after reboot, the PW pwOperStatus MUST be declared as notPresent(5). | 1.3.6.1.2.1.10.246.1.2.1 | not-accessible | current | |
| pwIndex OBJECT-TYPE A unique index for the conceptual row identifying a PW within this table. | 1.3.6.1.2.1.10.246.1.2.1.1 | PwIndexType | not-accessible | current |
| pwType OBJECT-TYPE This value indicates the emulated service to be carried over this PW. | 1.3.6.1.2.1.10.246.1.2.1.2 | IANAPwTypeTC | read-create | current |
| pwOwner OBJECT-TYPE This object is set by the operator to indicate the protocol responsible for establishing this PW. 'manual' is used in all cases where no maintenance protocol (PW signaling) is used to set up the PW, i.e., configuration of entries in the PW tables including PW labels, etc., is done by setting the MIB fields manually. 'pwIdFecSignaling' is used in case of signaling with the Pwid FEC element with LDP signaling. 'genFecSignaling' is used in case of LDP signaling with the generalized FEC. 'l2tpControlProtocol' indicates the use of the L2TP control protocol. 'other' is used for other types of signaling. | 1.3.6.1.2.1.10.246.1.2.1.3 | INTEGER {manual(1), pwIdFecSignaling(2), genFecSignaling(3), l2tpControlProtocol(4), other(5)} | read-create | current |
| pwPsnType OBJECT-TYPE This object is set by the operator to indicate the PSN type. Based on this object, the relevant PSN table's entry is created in the PSN-specific MIB modules. | 1.3.6.1.2.1.10.246.1.2.1.4 | IANAPwPsnTypeTC | read-create | current |
| pwSetUpPriority OBJECT-TYPE This object defines the relative priority of the PW during set-up in a lowest-to-highest fashion, where 0 is the highest priority. PWs with the same priority are treated with equal priority. PWs that have not yet completed setup will report 'dormant' in the pwOperStatus. This value is significant if there are competing resources among PWs and the implementation supports this feature. Equal priority handling with competing resources is implementation specific. This object MAY be changed at any time. | 1.3.6.1.2.1.10.246.1.2.1.5 | Integer32 (0..7) | read-create | current |
| pwHoldingPriority OBJECT-TYPE This object defines the relative holding priority of the PW in a lowest-to-highest fashion, where 0 is the highest priority. PWs with the same priority are treated equally. This value is significant if there are competing resources among PWs and the implementation supports this feature. Equal priority handling with competing resources is implementation specific. This object MAY be changed only if the PW is not active. | 1.3.6.1.2.1.10.246.1.2.1.6 | Integer32 (0..7) | read-create | current |
| pwPeerAddrType OBJECT-TYPE Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. | 1.3.6.1.2.1.10.246.1.2.1.8 | InetAddressType | read-create | current |
| pwPeerAddr OBJECT-TYPE This object contains the value of the peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not applicable (pwPeerAddrType is 'unknown'). | 1.3.6.1.2.1.10.246.1.2.1.9 | InetAddress | read-create | current |
| pwAttachedPwIndex OBJECT-TYPE If the PW is attached to another PW instead of a local native service, this item indicates the pwIndex of the attached PW. Otherwise, this object MUST be set to zero. Attachment to another PW will have no PW specific entry in any of the service MIB modules. | 1.3.6.1.2.1.10.246.1.2.1.10 | PwIndexOrZeroType | read-create | current |
| pwIfIndex OBJECT-TYPE This object indicates the ifIndex of the PW if the PW is represented in the ifTable. Otherwise, it MUST be set to zero. | 1.3.6.1.2.1.10.246.1.2.1.11 | InterfaceIndexOrZero | read-create | current |
| pwID OBJECT-TYPE Pseudowire identifier. If the pwOwner object is 'pwIdFecSignaling' or 'l2tpControlProtocol', then this object is signaled in the outgoing PW ID field within the 'Virtual Circuit FEC Element'. For other values of pwOwner, this object is not signaled and it MAY be set to zero. For implementations that support the pwIndexMappingTable, a non-zero value is RECOMMENDED, even if this identifier is not signaled. This is so that reverse mappings can be provided by pwIndexMappingTable and pwPeerMappingTable. It is therefore RECOMMENDED that the value of this pwID be unique (or if pwPeerAddrType is not 'unknown', at least [pwType, pwID, pwPeerAddrType, pwPeerAddr] is unique.) | 1.3.6.1.2.1.10.246.1.2.1.12 | PwIDType | read-create | current |
| pwLocalGroupID OBJECT-TYPE Used in the Group ID field sent to the peer PW End Service within the maintenance protocol used for PW setup. It SHOULD be set to zero if a maintenance protocol is not used. | 1.3.6.1.2.1.10.246.1.2.1.13 | PwGroupID | read-create | current |
| pwGroupAttachmentID OBJECT-TYPE This object is an octet string representing the attachment group identifier (AGI) that this PW belongs to, which typically identifies the VPN ID. Applicable if pwOwner equals 'genFecSignaling'. | 1.3.6.1.2.1.10.246.1.2.1.14 | PwAttachmentIdentifierType | read-create | current |
| pwLocalAttachmentID OBJECT-TYPE This object is an octet string representing the local forwarder attachment individual identifier (AII) to be used by this PW. It is used as the Source AII (SAII) for outgoing signaling messages and the Target AII (TAII) in the incoming messages from the peer. Applicable if pwOwner equal 'genFecSignaling'. | 1.3.6.1.2.1.10.246.1.2.1.15 | PwAttachmentIdentifierType | read-create | current |
| pwRemoteAttachmentID OBJECT-TYPE This object is an octet string representing the remote forwarder attachment individual identifier (AII) to be used by this PW. It is used as the TAII for outgoing signaling messages and the SAII in the incoming messages from the peer. Applicable if pwOwner equals 'genFecSignaling'. | 1.3.6.1.2.1.10.246.1.2.1.16 | PwAttachmentIdentifierType | read-create | current |
| pwCwPreference OBJECT-TYPE Defines if the control word will be sent with each packet by the local node. Some PW types mandate the use of a control word, and in such cases, the value configured for this object has no effect on the existence of the control word. This object MAY be changed only if the PW is not active. | 1.3.6.1.2.1.10.246.1.2.1.17 | TruthValue | read-create | current |
| pwLocalIfMtu OBJECT-TYPE If not equal to zero, the optional IfMtu object in the signaling protocol will be sent with this value, which represents the locally supported MTU size over the interface (or the virtual interface) associated with the PW. This object MAY be changed only if the PW is not active. | 1.3.6.1.2.1.10.246.1.2.1.18 | Unsigned32 (0..65535) | read-create | current |
| pwLocalIfString OBJECT-TYPE A PW MAY be associated to an interface (or a virtual interface) in the ifTable of the node as part of the service configuration. This object defines if the maintenance protocol will send the interface's name (ifAlias) as it appears in the ifTable. If set to false, the optional element will not be sent. This object MAY be changed only if the PW is not active. | 1.3.6.1.2.1.10.246.1.2.1.19 | TruthValue | read-create | current |
| pwLocalCapabAdvert OBJECT-TYPE If a maintenance protocol is used, it indicates the capabilities the local node will advertise to the peer. The operator MAY selectively assign a partial set of capabilities. In case of manual configuration of the PW, the operator SHOULD set non-conflicting options (for example, only a single type of Operations, Administration, and Management (OAM)) out of the available options in the implementation. It is possible to change the value of this object when the PW is not active. The agent MUST reject any attempt to set a capability that is not supported. The default value MUST be the full set of local node capabilities. | 1.3.6.1.2.1.10.246.1.2.1.20 | IANAPwCapabilities | read-create | current |
| pwRemoteGroupID OBJECT-TYPE This object is obtained from the Group ID field as received via the maintenance protocol used for PW setup. Value of zero will be reported if not used. Value of 0xFFFFFFFF shall be used if the object is yet to be defined by the PW maintenance protocol. | 1.3.6.1.2.1.10.246.1.2.1.21 | PwGroupID | read-only | current |
| pwCwStatus OBJECT-TYPE If signaling is used for PW establishment, this object indicates the status of the control word negotiation. For either signaling or manual configuration, it indicates if the control word (CW) is to be present for this PW. | 1.3.6.1.2.1.10.246.1.2.1.22 | PwCwStatusTC | read-only | current |
| pwRemoteIfMtu OBJECT-TYPE The remote interface MTU as (optionally) received from the remote node via the maintenance protocol. The object SHOULD report zero if the MTU is not available. | 1.3.6.1.2.1.10.246.1.2.1.23 | Unsigned32 | read-only | current |
| pwRemoteIfString OBJECT-TYPE Indicates the interface description string as received by the maintenance protocol. It MUST be a NULL string if a maintenance protocol is not used or the value is not known yet. | 1.3.6.1.2.1.10.246.1.2.1.24 | SnmpAdminString (SIZE(0..80)) | read-only | current |
| pwRemoteCapabilities OBJECT-TYPE Indicates the capabilities as received from the peer. | 1.3.6.1.2.1.10.246.1.2.1.25 | IANAPwCapabilities | read-only | current |
| pwFragmentCfgSize OBJECT-TYPE If set to a value other than zero, indicates that fragmentation is desired for this PW. This object MAY be changed only if the PW is not active. | 1.3.6.1.2.1.10.246.1.2.1.26 | PwFragSize | read-create | current |
| pwRmtFragCapability OBJECT-TYPE The status of the fragmentation based on the local configuration and the peer capabilities as received from the peer when a control protocol is used. | 1.3.6.1.2.1.10.246.1.2.1.27 | PwFragStatus | read-only | current |
| pwFcsRetentionCfg OBJECT-TYPE The local configuration of Frame Check Sequence (FCS) retention for this PW. FCS retention can be configured for PW types High-Level Data Link Control (HDLC), Point-to-Point Protocol (PPP), and Ethernet only. If the implementation does not support FCS retention, an error MUST be reported in pwFcsRetentionStatus. This object MAY be changed only if the PW is not active. | 1.3.6.1.2.1.10.246.1.2.1.28 | INTEGER {fcsRetentionDisable(1), fcsRetentionEnable(2)} | read-create | current |
| pwFcsRetentionStatus OBJECT-TYPE The status of the FCS retention negotiation process based on local configuration and the remote advertisement. remoteIndicationUnknown - set if a FEC has not been received from the remote. remoteRequestFcsRetention - indicates that the peer has requested FCS retention. FCS retention will be used if the local node is capable and configured to use it for this PW. fcsRetentionEnabled - FCS retention is enabled (both peers were configured for FCS retention for signaled PW, or the local node is configured and capable of FCS retention for manually assigned PWs). fcsRetentionDisabled - FCS retention is disabled (not configured locally or not advertised by the peer). localFcsRetentionCfgErr - set if the local node has been configured for FCS retention but is not capable to support it. fcsRetentionFcsSizeMismatch - set if there is an FCS size mismatch between the local and the peer node. | 1.3.6.1.2.1.10.246.1.2.1.29 | Bits {remoteIndicationUnknown(0), remoteRequestFcsRetention(1), fcsRetentionEnabled(2), fcsRetentionDisabled(3), localFcsRetentionCfgErr(4), fcsRetentionFcsSizeMismatch(5)} | read-only | current |
| pwOutboundLabel OBJECT-TYPE The PW label used in the outbound direction (i.e., toward the PSN). It might be set manually if pwOwner is 'manual'; otherwise, it is set automatically. For MPLS, MPLS over IP, or MPLS over Generic Routing Encapsulation (GRE) PSN, it represents the 20-bit PW tag; for L2TP, it represents the 32-bit Session ID; and for IP PSN, it represents the destination UDP port number. If the label is not yet known (signaling in process), the object SHOULD return a value of 0xFFFFFFFF. For manual configuration, this object MAY be changed only if the PW is not active. | 1.3.6.1.2.1.10.246.1.2.1.30 | Unsigned32 | read-create | current |
| pwInboundLabel OBJECT-TYPE The PW label used in the inbound direction (i.e., packets received from the PSN). It may be set manually if pwOwner is 'manual'; otherwise, it is set automatically. For MPLS, MPLS over IP, or MPLS over GRE PSN, it represents the 20-bit PW tag; for L2TP, it represents the 32-bit Session ID; and for IP PSN, it represents the source UDP port number. If the label is not yet known (signaling in process), the object SHOULD return a value of 0xFFFFFFFF. For manual configuration, this object MAY be changed only if the PW is not active. | 1.3.6.1.2.1.10.246.1.2.1.31 | Unsigned32 | read-create | current |
| pwName OBJECT-TYPE The canonical name assigned to the PW. This object MAY be changed at any time. | 1.3.6.1.2.1.10.246.1.2.1.32 | SnmpAdminString | read-create | current |
| pwDescr OBJECT-TYPE A textual string containing information about the PW. If there is no description, this object contains a zero- length string. This object MAY be changed at any time. | 1.3.6.1.2.1.10.246.1.2.1.33 | SnmpAdminString | read-create | current |
| pwCreateTime OBJECT-TYPE The value of sysUpTime at the time this PW was created. | 1.3.6.1.2.1.10.246.1.2.1.34 | TimeStamp | read-only | current |
| pwUpTime OBJECT-TYPE Specifies the time since last change of pwOperStatus to Up(1). | 1.3.6.1.2.1.10.246.1.2.1.35 | TimeTicks | read-only | current |
| pwLastChange OBJECT-TYPE The value of sysUpTime at the time the PW entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value. | 1.3.6.1.2.1.10.246.1.2.1.36 | TimeTicks | read-only | current |
| pwAdminStatus OBJECT-TYPE The desired operational status of this PW. This object MAY be set at any time. | 1.3.6.1.2.1.10.246.1.2.1.37 | INTEGER {up(1), down(2), testing(3)} | read-create | current |
| pwOperStatus OBJECT-TYPE This object indicates the operational status of the PW; it does not reflect the status of the Customer Edge (CE) bound interface. It is set to down only if pwNotForwarding, psnFacingPwRxFault, or psnFacingPwTxFault indications are set in pwLocalStatus or pwRemoteStatus. It indicates 'lowerLayerDown' if the only reason for not being in the 'up' state is that either the outer tunnel or physical layer of the network side is in the 'down' state. All other states are declared based on the description of the PwOperStatusTC. | 1.3.6.1.2.1.10.246.1.2.1.38 | PwOperStatusTC | read-only | current |
| pwLocalStatus OBJECT-TYPE Indicates the status of the PW in the local node. The various indications in this object SHOULD be available independent of the ability of the local node to advertise them or the remote node to accept these status indications through the control protocol. | 1.3.6.1.2.1.10.246.1.2.1.39 | PwStatus | read-only | current |
| pwRemoteStatusCapable OBJECT-TYPE Indicates the remote node capability to advertise the PW status notification. notApplicable SHOULD be reported for a manually set PW, or if the local node is not capable of accepting the status notification object. notYetKnown SHOULD be reported if the signaling protocol has not yet finished the process of capability determination. remoteCapable and remoteNotcapable SHOULD be reported based on the initial signaling exchange that has determined the remote node capability. | 1.3.6.1.2.1.10.246.1.2.1.40 | INTEGER {notApplicable(1), notYetKnown(2), remoteCapable(3), remoteNotCapable(4)} | read-only | current |
| pwRemoteStatus OBJECT-TYPE Indicates the status of the PW as was advertised by the remote. If the remote is not capable of advertising the status object, or the local node is not able to accept the status object through signaling, then the applicable bit is 'pwNotForwarding', which is set if the remote has sent label release or label withdraw for this PW. | 1.3.6.1.2.1.10.246.1.2.1.41 | PwStatus | read-only | current |
| pwTimeElapsed OBJECT-TYPE The number of seconds, including partial seconds, that have elapsed since the beginning of the current interval measurement period. | 1.3.6.1.2.1.10.246.1.2.1.42 | HCPerfTimeElapsed | read-only | current |
| pwValidIntervals OBJECT-TYPE The number of previous 15-minute intervals for which data was collected. | 1.3.6.1.2.1.10.246.1.2.1.43 | HCPerfValidIntervals | read-only | current |
| pwRowStatus OBJECT-TYPE For creating, modifying, and deleting this row. This object MAY be changed at any time. | 1.3.6.1.2.1.10.246.1.2.1.44 | RowStatus | read-create | current |
| pwStorageType OBJECT-TYPE This variable indicates the storage type for this object. | 1.3.6.1.2.1.10.246.1.2.1.45 | StorageType | read-create | current |
| pwOamEnable OBJECT-TYPE This variable indicates if OAM is enabled for this PW. It MAY be changed at any time. | 1.3.6.1.2.1.10.246.1.2.1.46 | TruthValue | read-create | current |
| pwGenAGIType OBJECT-TYPE This variable indicates the AGI type if generalized FEC (129) is used for PW signaling or configuration. It SHOULD return the value of zero otherwise. | 1.3.6.1.2.1.10.246.1.2.1.47 | PwGenIdType | read-create | current |
| pwGenLocalAIIType OBJECT-TYPE This object is the type of the local forwarder attachment individual identifier (AII) to be used by this PW if generalized FEC (129) is used for PW signaling or configuration. | 1.3.6.1.2.1.10.246.1.2.1.48 | PwGenIdType | read-create | current |
| pwGenRemoteAIIType OBJECT-TYPE This object is the type of the remote forwarder attachment individual identifier (AII) to be used by this PW if generalized FEC (129) is used for PW signaling or configuration. | 1.3.6.1.2.1.10.246.1.2.1.49 | PwGenIdType | read-create | current |
| pwPerfCurrentTable OBJECT-TYPE This table provides per-PW performance information for the current interval. | 1.3.6.1.2.1.10.246.1.3 | not-accessible | current | |
| pwPerfCurrentEntry OBJECT-TYPE An entry in this table is created by the agent for every PW. | 1.3.6.1.2.1.10.246.1.3.1 | not-accessible | current | |
| pwPerfCurrentInHCPackets OBJECT-TYPE High-capacity counter for number of packets received by the PW (from the PSN) in the current 15-minute interval. This is the 64-bit version of pwPerfCurrentInPackets, if pwPerfCurrentInHCPackets is supported according to the rules spelled out in RFC 2863. | 1.3.6.1.2.1.10.246.1.3.1.1 | HCPerfCurrentCount | read-only | current |
| pwPerfCurrentInHCBytes OBJECT-TYPE High-capacity counter for number of bytes received by the PW (from the PSN) in the current 15-minute interval. This is the 64-bit version of pwPerfCurrentInBytes, if pwPerfCurrentInHCBytes is supported according to the rules spelled out in RFC 2863. | 1.3.6.1.2.1.10.246.1.3.1.2 | HCPerfCurrentCount | read-only | current |
| pwPerfCurrentOutHCPackets OBJECT-TYPE High-capacity counter for number of packets forwarded by the PW (to the PSN) in the current 15-minute interval. This is the 64-bit version of pwPerfCurrentOutPackets, if pwPerfCurrentOutHCPackets is supported according to the rules spelled out in RFC 2863. | 1.3.6.1.2.1.10.246.1.3.1.3 | HCPerfCurrentCount | read-only | current |
| pwPerfCurrentOutHCBytes OBJECT-TYPE High-capacity counter for number of bytes forwarded by the PW (to the PSN) in the current 15-minute interval. This is the 64-bit version of pwPerfCurrentOutBytes, if pwPerfCurrentOutHCBytes is supported according to the rules spelled out in RFC 2863. | 1.3.6.1.2.1.10.246.1.3.1.4 | HCPerfCurrentCount | read-only | current |
| pwPerfCurrentInPackets OBJECT-TYPE The counter for number of packets received by the PW (from the PSN) in the current 15-minute interval. This is the 32-bit version of pwPerfCurrentInHCPackets, if pwPerfCurrentInHCPackets is supported according to the rules spelled out in RFC 2863. | 1.3.6.1.2.1.10.246.1.3.1.5 | PerfCurrentCount | read-only | current |
| pwPerfCurrentInBytes OBJECT-TYPE The counter for number of bytes received by the PW (from the PSN) in the current 15-minute interval. It MUST be equal to the least significant 32 bits of pwPerfCurrentInHCBytes, if pwPerfCurrentInHCBytes is supported according to the rules spelled out in RFC 2863. | 1.3.6.1.2.1.10.246.1.3.1.6 | PerfCurrentCount | read-only | current |
| pwPerfCurrentOutPackets OBJECT-TYPE The counter for number of packets forwarded by the PW (to the PSN) in the current 15-minute interval. It MUST be equal to the least significant 32 bits of pwPerfCurrentOutHCPackets, if pwPerfCurrentOutHCPackets is supported according to the rules spelled out in RFC 2863. | 1.3.6.1.2.1.10.246.1.3.1.7 | PerfCurrentCount | read-only | current |
| pwPerfCurrentOutBytes OBJECT-TYPE The counter for number of bytes forwarded by the PW (to the PSN) in the current 15-minute interval. It MUST be equal to the least significant 32 bits of pwPerfCurrentOutHCBytes, if pwPerfCurrentOutHCBytes is supported according to the rules spelled out in RFC 2863. | 1.3.6.1.2.1.10.246.1.3.1.8 | PerfCurrentCount | read-only | current |
| pwPerfIntervalTable OBJECT-TYPE This table provides per-PW performance information for each interval. | 1.3.6.1.2.1.10.246.1.4 | not-accessible | current | |
| pwPerfIntervalEntry OBJECT-TYPE An entry in this table is created by the agent for every PW. | 1.3.6.1.2.1.10.246.1.4.1 | not-accessible | current | |
| pwPerfIntervalNumber OBJECT-TYPE A number N, between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15-minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. The minimum range of N is 1 through 4. The default range is 1 to 32. The maximum range of N is 1 through 96. | 1.3.6.1.2.1.10.246.1.4.1.1 | Integer32 (1..96) | not-accessible | current |
| pwPerfIntervalValidData OBJECT-TYPE This variable indicates if the data for this interval is valid. | 1.3.6.1.2.1.10.246.1.4.1.2 | TruthValue | read-only | current |
| pwPerfIntervalTimeElapsed OBJECT-TYPE The duration of this interval in seconds. | 1.3.6.1.2.1.10.246.1.4.1.3 | HCPerfTimeElapsed | read-only | current |
| pwPerfIntervalInHCPackets OBJECT-TYPE High-capacity counter for number of packets received by the PW (from the PSN) during the interval. This is the 64-bit version of pwPerfIntervalInPackets, if pwPerfIntervalInHCPackets is supported according to the rules spelled out in RFC 2863. | 1.3.6.1.2.1.10.246.1.4.1.4 | HCPerfIntervalCount | read-only | current |
| pwPerfIntervalInHCBytes OBJECT-TYPE High-capacity counter for number of bytes received by the PW (from the PSN) during the interval. This is the 64-bit version of pwPerfIntervalInBytes, if pwPerfIntervalInHCBytes is supported according to the rules spelled out in RFC 2863. | 1.3.6.1.2.1.10.246.1.4.1.5 | HCPerfIntervalCount | read-only | current |
| pwPerfIntervalOutHCPackets OBJECT-TYPE High-capacity counter for number of packets forwarded by the PW (to the PSN) during the interval. This is the 64-bit version of pwPerfIntervalOutPackets, if pwPerfIntervalOutHCPackets is supported according to the rules spelled out in RFC 2863. | 1.3.6.1.2.1.10.246.1.4.1.6 | HCPerfIntervalCount | read-only | current |
| pwPerfIntervalOutHCBytes OBJECT-TYPE High-capacity counter for number of bytes forwarded by the PW (to the PSN) during the interval. This is the 64-bit version of pwPerfIntervalOutBytes, if pwPerfIntervalOutHCBytes is supported according to the rules spelled out in RFC 2863. | 1.3.6.1.2.1.10.246.1.4.1.7 | HCPerfIntervalCount | read-only | current |
| pwPerfIntervalInPackets OBJECT-TYPE This value represents the number of packets received by this PW during the interval. It MUST be equal to the least significant 32 bits of pwPerfIntervalInHCPackets, if pwPerfIntervalInHCPackets is supported according to the rules spelled out in RFC 2863. | 1.3.6.1.2.1.10.246.1.4.1.8 | PerfIntervalCount | read-only | current |
| pwPerfIntervalInBytes OBJECT-TYPE This value represents the number of bytes received by this PW during the interval. It MUST be equal to the least significant 32 bits of pwPerfIntervalInHCBytes, if pwPerfIntervalInHCBytes is supported according to the rules spelled out in RFC 2863. | 1.3.6.1.2.1.10.246.1.4.1.9 | PerfIntervalCount | read-only | current |
| pwPerfIntervalOutPackets OBJECT-TYPE This value represents the number of packets sent by this PW during the interval. It MUST be equal to the least significant 32 bits of pwPerfIntervalOutHCPackets, if pwPerfIntervalOutHCPackets is supported according to the rules spelled out in RFC 2863. | 1.3.6.1.2.1.10.246.1.4.1.10 | PerfIntervalCount | read-only | current |
| pwPerfIntervalOutBytes OBJECT-TYPE This value represents the number of bytes sent by this PW during the interval. It MUST be equal to the least significant 32 bits of pwPerfIntervalOutHCBytes, if pwPerfIntervalOutHCBytes is supported according to the rules spelled out in RFC 2863. | 1.3.6.1.2.1.10.246.1.4.1.11 | PerfIntervalCount | read-only | current |
| pwPerf1DayIntervalTable OBJECT-TYPE This table provides per-PW performance information for the current day's measurement and the previous day's interval. | 1.3.6.1.2.1.10.246.1.5 | not-accessible | current | |
| pwPerf1DayIntervalEntry OBJECT-TYPE An entry in this table is created by the agent for every PW. | 1.3.6.1.2.1.10.246.1.5.1 | not-accessible | current | |
| pwPerf1DayIntervalNumber OBJECT-TYPE History Data Interval number. Interval 1 is the current day's measurement period, interval 2 is the most recent previous day, and interval 30 is 31 days ago. Intervals 3..31 are optional. | 1.3.6.1.2.1.10.246.1.5.1.1 | Unsigned32 (1..31) | not-accessible | current |
| pwPerf1DayIntervalValidData OBJECT-TYPE This variable indicates if the data for this interval is valid. | 1.3.6.1.2.1.10.246.1.5.1.2 | TruthValue | read-only | current |
| pwPerf1DayIntervalTimeElapsed OBJECT-TYPE The number of seconds in the 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring data could not be collected for any reason or where agent clock adjustments have been made. | 1.3.6.1.2.1.10.246.1.5.1.3 | HCPerfTimeElapsed | read-only | current |
| pwPerf1DayIntervalInHCPackets OBJECT-TYPE High-capacity counter for the total number of packets received by the PW (from the PSN). | 1.3.6.1.2.1.10.246.1.5.1.4 | Counter64 | read-only | current |
| pwPerf1DayIntervalInHCBytes OBJECT-TYPE High-capacity counter for the total number of bytes received by the PW (from the PSN). | 1.3.6.1.2.1.10.246.1.5.1.5 | Counter64 | read-only | current |
| pwPerf1DayIntervalOutHCPackets OBJECT-TYPE High-capacity counter for the total number of packets forwarded by the PW (to the PSN). | 1.3.6.1.2.1.10.246.1.5.1.6 | Counter64 | read-only | current |
| pwPerf1DayIntervalOutHCBytes OBJECT-TYPE High-capacity counter for the total number of bytes forwarded by the PW (to the PSN). | 1.3.6.1.2.1.10.246.1.5.1.7 | Counter64 | read-only | current |
| pwPerfTotalErrorPackets OBJECT-TYPE Counter for number of errors at the PW processing level, for example, packets received with unknown PW label. | 1.3.6.1.2.1.10.246.1.6 | Counter32 | read-only | current |
| pwIndexMappingTable OBJECT-TYPE This table enables the reverse mapping of the unique PWid parameters [peer IP, PW type, and PW ID] and the pwIndex. The table is not applicable for PWs created manually or by using the generalized FEC. | 1.3.6.1.2.1.10.246.1.7 | not-accessible | current | |
| pwIndexMappingEntry OBJECT-TYPE An entry in this table MUST be created by the agent for every PW created by the pwTable for which pwOwner equals pwIdFecSignaling and pwID is not zero. Implementers need to be aware that if the value of the pwIndexMappingPeerAddr (an OID) has more than 113 sub-identifiers, then OIDs of column instances in this table will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. | 1.3.6.1.2.1.10.246.1.7.1 | not-accessible | current | |
| pwIndexMappingPwType OBJECT-TYPE The PW type (indicates the service) of this PW. | 1.3.6.1.2.1.10.246.1.7.1.1 | IANAPwTypeTC | not-accessible | current |
| pwIndexMappingPwID OBJECT-TYPE The PW ID of this PW. Zero if the PW is configured manually. | 1.3.6.1.2.1.10.246.1.7.1.2 | PwIDType | not-accessible | current |
| pwIndexMappingPeerAddrType OBJECT-TYPE IP address type of the peer node. | 1.3.6.1.2.1.10.246.1.7.1.3 | InetAddressType | not-accessible | current |
| pwIndexMappingPeerAddr OBJECT-TYPE IP address of the peer node. | 1.3.6.1.2.1.10.246.1.7.1.4 | InetAddress | not-accessible | current |
| pwIndexMappingPwIndex OBJECT-TYPE The value that represents the PW in the pwTable. | 1.3.6.1.2.1.10.246.1.7.1.5 | PwIndexType | read-only | current |
| pwPeerMappingTable OBJECT-TYPE This table provides reverse mapping of the existing PW based on PW type and PW ID ordering. This table is typically useful for the element management system (EMS) ordered query of existing PWs. | 1.3.6.1.2.1.10.246.1.8 | not-accessible | current | |
| pwPeerMappingEntry OBJECT-TYPE An entry in this table is created by the agent for every PW entry in the pwTable. Implementers need to be aware that if the value of the pwPeerMappingPeerAddr (an OID) has more than 113 sub-identifiers, then OIDs of column instances in this table will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. | 1.3.6.1.2.1.10.246.1.8.1 | not-accessible | current | |
| pwPeerMappingPeerAddrType OBJECT-TYPE IP address type of the peer node. | 1.3.6.1.2.1.10.246.1.8.1.1 | InetAddressType | not-accessible | current |
| pwPeerMappingPeerAddr OBJECT-TYPE IP address of the peer node. | 1.3.6.1.2.1.10.246.1.8.1.2 | InetAddress | not-accessible | current |
| pwPeerMappingPwType OBJECT-TYPE The PW type (indicates the emulated service) of this PW. | 1.3.6.1.2.1.10.246.1.8.1.3 | IANAPwTypeTC | not-accessible | current |
| pwPeerMappingPwID OBJECT-TYPE The PW ID of this PW. Zero if the PW is configured manually. | 1.3.6.1.2.1.10.246.1.8.1.4 | PwIDType | not-accessible | current |
| pwPeerMappingPwIndex OBJECT-TYPE The value that represents the PW in the pwTable. | 1.3.6.1.2.1.10.246.1.8.1.5 | PwIndexType | read-only | current |
| pwUpDownNotifEnable OBJECT-TYPE If this object is set to true(1), then it enables the emission of pwUp and pwDown notifications; otherwise, these notifications are not emitted. | 1.3.6.1.2.1.10.246.1.9 | TruthValue | read-write | current |
| pwDeletedNotifEnable OBJECT-TYPE If this object is set to true(1), then it enables the emission of pwDeleted notification; otherwise, this notification is not emitted. | 1.3.6.1.2.1.10.246.1.10 | TruthValue | read-write | current |
| pwNotifRate OBJECT-TYPE This object defines the maximum number of PW notifications that can be emitted from the device per second. | 1.3.6.1.2.1.10.246.1.11 | Unsigned32 | read-write | current |
| pwGenFecIndexMappingTable OBJECT-TYPE This table enables the reverse mapping of the unique PWid parameters [GroupAttachmentID, LocalAttachmentID, and PeerAttachmentID] and the pwIndex. The table is only applicable for PW using the generalized FEC. | 1.3.6.1.2.1.10.246.1.12 | not-accessible | current | |
| pwGenFecIndexMappingEntry OBJECT-TYPE An entry in this table MUST be created by the agent for every PW created by the pwTable for which pwOwner equals genFecSignaling. Implementers need to be aware that if the combined value of pwGenFecIndexMappingAGI, pwGenFecIndexMappingLocalAII, and pwGenFecIndexMappingRemoteAII (OIDs) has more than 113 sub-identifiers, then OIDs of column instances in this table will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. | 1.3.6.1.2.1.10.246.1.12.1 | not-accessible | current | |
| pwGenFecIndexMappingAGIType OBJECT-TYPE This object is the type of the attachment group identifier (AGI) that this PW belongs to. | 1.3.6.1.2.1.10.246.1.12.1.1 | PwGenIdType | not-accessible | current |
| pwGenFecIndexMappingAGI OBJECT-TYPE This object is an octet string representing the attachment group identifier (AGI) that this PW belongs to, which typically identifies the VPN ID. | 1.3.6.1.2.1.10.246.1.12.1.2 | PwAttachmentIdentifierType | not-accessible | current |
| pwGenFecIndexMappingLocalAIIType OBJECT-TYPE This object is the type of the local forwarder attachment individual identifier (AII) to be used by this PW. | 1.3.6.1.2.1.10.246.1.12.1.3 | PwGenIdType | not-accessible | current |
| pwGenFecIndexMappingLocalAII OBJECT-TYPE This object is an octet string representing the local forwarder attachment individual identifier (AII) to be used by this PW. It is used as the SAII for outgoing signaling messages and the TAII in the incoming messages from the peer. | 1.3.6.1.2.1.10.246.1.12.1.4 | PwAttachmentIdentifierType | not-accessible | current |
| pwGenFecIndexMappingRemoteAIIType OBJECT-TYPE This object is the type of the remote forwarder attachment individual identifier (AII) to be used by this PW. | 1.3.6.1.2.1.10.246.1.12.1.5 | PwGenIdType | not-accessible | current |
| pwGenFecIndexMappingRemoteAII OBJECT-TYPE This object is an octet string representing the peer forwarder attachment individual identifier (AII) to be used by this PW. It is used as the TAII for outgoing signaling messages and the SAII in the incoming messages from the peer. | 1.3.6.1.2.1.10.246.1.12.1.6 | PwAttachmentIdentifierType | not-accessible | current |
| pwGenFecIndexMappingPwIndex OBJECT-TYPE The value that represents the PW in the pwTable. | 1.3.6.1.2.1.10.246.1.12.1.7 | PwIndexType | read-only | current |
| pwConformance OBJECT-IDENTITY | 1.3.6.1.2.1.10.246.2 | |||
| pwGroups OBJECT-IDENTITY | 1.3.6.1.2.1.10.246.2.1 | |||
| pwCompliances OBJECT-IDENTITY | 1.3.6.1.2.1.10.246.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| pwDown NOTIFICATION-TYPE This notification is generated when the pwOperStatus object for one or more contiguous entries in the pwTable are about to enter the down(2) or lowerLayerDown(6) state from any other state, except for transition from the notPresent(5) state. For the purpose of deciding when these notifications occur, the lowerLayerDown(6) state and the down(2) state are considered to be equivalent; i.e., there is no notification on transition from lowerLayerDown(6) into down(2), and there is a trap on transition from any other state except down(2) (and notPresent) into lowerLayerDown(6). The included values of pwOperStatus MUST each be equal to down(2) or lowerLayerDown(6). The two instances of pwOperStatus in this notification indicate the range of indexes that are affected. Note that all the indexes of the two ends of the range can be derived from the instance identifiers of these two objects. For cases where a contiguous range of cross-connects have transitioned into the down(2) and lowerLayerDown(6) states at roughly the same time, the device SHOULD issue a single notification for each range of contiguous indexes in an effort to minimize the emission of a large number of notifications. If a notification has to be issued for just a single cross-connect entry, then the instance identifier (and values) of the two pwOperStatus objects MUST be identical. | 1.3.6.1.2.1.10.246.0.1 | current |
| pwUp NOTIFICATION-TYPE This notification is generated when the pwOperStatus object for one or more contiguous entries in the pwTable are about to enter the up(1) state from some other state except the notPresent(5) state and given that the pwDown notification been issued for these entries. The included values of pwOperStatus MUST both be set equal to this new state (i.e., up(1)). The two instances of pwOperStatus in this notification indicate the range of indexes that are affected. Note that all the indexes of the two ends of the range can be derived from the instance identifiers of these two objects. For cases where a contiguous range of cross-connects have transitioned into the up(1) state at roughly the same time, the device SHOULD issue a single notification for each range of contiguous indexes in an effort to minimize the emission of a large number of notifications. If a notification has to be issued for just a single cross-connect entry, then the instance identifier (and values) of the two pwOperStatus objects MUST be identical. | 1.3.6.1.2.1.10.246.0.2 | current |
| pwDeleted NOTIFICATION-TYPE This notification is generated when the PW has been deleted, i.e., when the pwRowStatus has been set to destroy(6) or the PW has been deleted by a non-MIB application or due to an auto-discovery process. | 1.3.6.1.2.1.10.246.0.3 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| pwBasicGroup OBJECT-GROUP Collection of objects that are required in all implementations that support the PW MIB module. | 1.3.6.1.2.1.10.246.2.1.1 | current |
| pwPwIdGroup OBJECT-GROUP Collection of objects required for PW ID configuration and signaling. | 1.3.6.1.2.1.10.246.2.1.2 | current |
| pwGeneralizedFecGroup OBJECT-GROUP Collection of objects required for generalized FEC configuration and signaling. | 1.3.6.1.2.1.10.246.2.1.3 | current |
| pwFcsGroup OBJECT-GROUP Collection of objects required for FCS retention configuration and signaling. | 1.3.6.1.2.1.10.246.2.1.4 | current |
| pwFragGroup OBJECT-GROUP Collection of objects required for fragmentation configuration and signaling. | 1.3.6.1.2.1.10.246.2.1.5 | current |
| pwPwStatusGroup OBJECT-GROUP Collection of objects required for PW status configuration and signaling. | 1.3.6.1.2.1.10.246.2.1.6 | current |
| pwGetNextGroup OBJECT-GROUP Collection of objects for getting the next available index. | 1.3.6.1.2.1.10.246.2.1.7 | current |
| pwPriorityGroup OBJECT-GROUP Collection of objects for controlling the PW setup and holding priority. | 1.3.6.1.2.1.10.246.2.1.8 | current |
| pwAttachmentGroup OBJECT-GROUP Collection of objects for PW configuration as ifIndex. | 1.3.6.1.2.1.10.246.2.1.9 | current |
| pwPerformanceGeneralGroup OBJECT-GROUP Collection of general objects needed for managing the total running performance parameters. | 1.3.6.1.2.1.10.246.2.1.10 | current |
| pwPeformance1DayIntervalGroup OBJECT-GROUP Collection of objects needed for a PW running 1-day interval performance collection. | 1.3.6.1.2.1.10.246.2.1.11 | current |
| pwPerformanceIntervalGeneralGroup OBJECT-GROUP Collection of general objects needed for managing the interval performance parameters. | 1.3.6.1.2.1.10.246.2.1.12 | current |
| pwPeformanceIntervalGroup OBJECT-GROUP Collection of 32-bit objects needed for PW performance collection in 15-minute intervals. | 1.3.6.1.2.1.10.246.2.1.13 | current |
| pwHCPeformanceIntervalGroup OBJECT-GROUP Collection of HC objects needed for PW performance collection in 15-minute intervals. | 1.3.6.1.2.1.10.246.2.1.14 | current |
| pwMappingTablesGroup OBJECT-GROUP Collection of objects contained in the reverse mapping tables. | 1.3.6.1.2.1.10.246.2.1.15 | current |
| pwNotificationControlGroup OBJECT-GROUP Collection of objects for controlling the PW notifications. | 1.3.6.1.2.1.10.246.2.1.16 | current |
| pwNotificationGroup NOTIFICATION-GROUP Collection of PW notifications objects. | 1.3.6.1.2.1.10.246.2.1.17 | current |
| pwSignalingGroup OBJECT-GROUP Collection of objects for use in implementations that support the PW signaling. | 1.3.6.1.2.1.10.246.2.1.18 | current |
| pwModuleFullCompliance MODULE-COMPLIANCE The compliance statement for agents that provide full support for the PW MIB module. Such devices can then be monitored and configured using this MIB module. | 1.3.6.1.2.1.10.246.2.2.1 | current |
| pwModuleReadOnlyCompliance MODULE-COMPLIANCE The compliance statement for agents that provide read- only support for the PW MIB module. Such devices can then be monitored but cannot be configured using this MIB module. | 1.3.6.1.2.1.10.246.2.2.2 | current |