PORT-SECURITY-MIB
- Registered at
- 1.3.6.1.4.1.171.12.63
- Last updated
- 1912-10-16 10:30
- Organization
- D-Link Corp.
- Namespace
- dlink
- Source file
PORT-SECURITY-MIB- Digest
sha256:a5e13cf7b044d1151df65d5db2ff66d3da540c6d9ef201add7f1444491cc8ca2
Description
The structure of port security for the proprietary enterprise.
Contact
http://support.dlink.com
Imports
| From | Symbols |
|---|---|
| DLINK-ID-REC-MIB | dlink-common-mgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, TEXTUAL-CONVENTION |
Imported by
6 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
DLINK-ID-REC-MIB PORT-SECURITY-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| swPortSecCtrl OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.63.1 | |||
| swPortSecTrapLogState OBJECT-TYPE When enabled(1), whenever there's a new MAC address that violates the pre-defined port security configuration, traps will be sent out and the relevant information will be logged into the system. | 1.3.6.1.4.1.171.12.63.1.1 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| swPortSecSysMaxLernAddr OBJECT-TYPE Indicates the maximum number of addresses to be authorized by port security on the system. A value of -1 means no-limit. The default value is no-limit. The max entry range is (1..N). The value N means the max number and is determined by the project itself. | 1.3.6.1.4.1.171.12.63.1.2 | INTEGER | read-write | current |
| swPortSecTrapState OBJECT-TYPE When enabled(1), whenever there's a new MAC address that violates the pre-defined port security configuration, trap will be sent out. | 1.3.6.1.4.1.171.12.63.1.3 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| swPortSecLogState OBJECT-TYPE When enabled(1), whenever there's a new MAC address that violates the pre-defined port security configuration, the relevant information will be logged into the system. | 1.3.6.1.4.1.171.12.63.1.4 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| swPortSecInfo OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.63.2 | |||
| swPortSecMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.63.3 | |||
| swPortSecMgmtByPort OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.63.3.1 | |||
| swPortSecPortTable OBJECT-TYPE A port security feature which controls the address learning capability and traffic forwarding decisions. Each port can be enabled or disabled for this function. When it is enabled and a number is given said N, which allows N addresses to be learned on this port, the first N learned addresses are locked at this port as static entries. When the learned addresses number reaches N, any incoming packet without learned source addresses are discarded (e.g. dropped) and no more new addresses can be learned on this port. | 1.3.6.1.4.1.171.12.63.3.1.1 | not-accessible | current | |
| swPortSecPortEntry OBJECT-TYPE A list of information contained in the swPortSecPortTable. | 1.3.6.1.4.1.171.12.63.3.1.1.1 | not-accessible | current | |
| swPortSecPortIndex OBJECT-TYPE Indicates the secured port to lock address learning. | 1.3.6.1.4.1.171.12.63.3.1.1.1.1 | INTEGER | not-accessible | current |
| swPortSecPortMaxLernAddr OBJECT-TYPE Indicates the allowable number of addresses to be learned on this port. The max entry range is (0..N). The value N means the max number and is determined by the project itself. | 1.3.6.1.4.1.171.12.63.3.1.1.1.2 | INTEGER | read-write | current |
| swPortSecPortLockAddrMode OBJECT-TYPE Indicates the mode of locking address. In deleteOnTimeout(2) mode, the locked addresses can be aged out after the aging timer expires. In this mode, when the locked address is aged out, the number of addresses that can be learned has to be increased by one. In deleteOnReset (3) mode, locked addresses never age out unless the system restarts which will prevent port movement or intrusion. | 1.3.6.1.4.1.171.12.63.3.1.1.1.3 | INTEGER {permanent(1), deleteOnTimeout(2), deleteOnReset(3)} | read-write | current |
| swPortSecPortAdmState OBJECT-TYPE Indicates the administration state of the locking address. | 1.3.6.1.4.1.171.12.63.3.1.1.1.4 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| swPortSecPortClearCtrl OBJECT-TYPE Used to clear port security entries by port. Setting this value to 'start' will execute the clear action. Once cleared, the value returns to 'other'. | 1.3.6.1.4.1.171.12.63.3.1.1.1.5 | INTEGER {other(1), start(2)} | read-write | current |
| swPortSecPortViolationAction OBJECT-TYPE Used to indicates the action when violation occurs. When the number of secure MAC address reaches the maximum learning number on the port, for drop action, new entry will be dropped and for shutdown action, the port will be shut down and enter error-disabled state immediately. | 1.3.6.1.4.1.171.12.63.3.1.1.1.6 | INTEGER {drop(1), shutdown(2)} | read-write | current |
| swPortSecMgmtByVLAN OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.63.3.2 | |||
| swPortSecVLANTable OBJECT-TYPE A port security feature which controls the address leaning capability. When number is given said N, which allows N addresses to be learned on this VLAN, the first N learned addresses are locked at this VLAN as static entries. When the learned addresses number reaches N, any incoming packet without learned source addresses are discarded (e.g. dropped) and no more new addresses can be learned on this VLAN. | 1.3.6.1.4.1.171.12.63.3.2.1 | not-accessible | current | |
| swPortSecVLANEntry OBJECT-TYPE A list of information contained in the swPortSecVLANTable. | 1.3.6.1.4.1.171.12.63.3.2.1.1 | not-accessible | current | |
| swPortSecVLANID OBJECT-TYPE Indicates the secured VLAN to lock address learning. | 1.3.6.1.4.1.171.12.63.3.2.1.1.1 | INTEGER (1..4094) | not-accessible | current |
| swPortSecVLANMaxLernAddr OBJECT-TYPE Indicates allowable number of addresses to be learned on this VLAN. A value of -1 means no-limit. The default value is no-limit. The max entry range is (0..N). The value N means the max number and is determined by the project itself. | 1.3.6.1.4.1.171.12.63.3.2.1.1.2 | INTEGER | read-write | current |
| swPortSecVLANClearCtrl OBJECT-TYPE Used to clear port security entries by VLAN. Setting this value to 'start' will execute the clear action. Once cleared, the value returns to 'other'. | 1.3.6.1.4.1.171.12.63.3.2.1.1.3 | INTEGER {other(1), start(2)} | read-write | current |
| swPortSecMgmtByVLANOnPort OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.63.3.3 | |||
| swPortSecVLANOnPortTable OBJECT-TYPE A port security feature which controls the address learning capability. When number is given said N, which allows N addresses to be learned on this VLAN from the special port, the first N learned addresses are locked at this VLAN from the special port as static entries. When the learned addresses number reaches N, any incoming packet without learned source addresses are discarded (e.g. dropped) and no more new addresses can be learned on this VLAN from the special port. | 1.3.6.1.4.1.171.12.63.3.3.1 | not-accessible | current | |
| swPortSecVLANOnPortEntry OBJECT-TYPE A list of information contained in the swPortSecVLANOnPortTable. | 1.3.6.1.4.1.171.12.63.3.3.1.1 | not-accessible | current | |
| swPortSecVLANOnPortMaxLernAddr OBJECT-TYPE Indicates allowable number of addresses to be learned on this VLAN from the special port. A value of -1 means no-limit. The default value is no-limit. Only VLANs with limitations will be displayed in this table. The max entry range is (0..N). The value N means the max number and is determined by the project itself. | 1.3.6.1.4.1.171.12.63.3.3.1.1.1 | INTEGER | read-write | current |
| swPortSecVLANOnPortAddCtrl OBJECT-TYPE other (1): When user gets this object, it always returns other(1). add (2): Used to configure the VLAN limit from the special port. If 'add' is selected, swPortSecVLANOnPortMaxLernAddr must be set to a valid value except -1. | 1.3.6.1.4.1.171.12.63.3.3.1.1.2 | INTEGER {other(1), add(2)} | read-create | current |
| swPortSecMgmtByVLANOnPortClearCtrl OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.63.3.3.2 | |||
| swPortSecMgmtByVLANOnPortClearPort OBJECT-TYPE Indicates the port. | 1.3.6.1.4.1.171.12.63.3.3.2.1 | INTEGER | read-write | current |
| swPortSecMgmtByVLANOnPortClearVID OBJECT-TYPE Indicates the VID. | 1.3.6.1.4.1.171.12.63.3.3.2.2 | INTEGER | read-write | current |
| swPortSecMgmtByVLANOnPortClearAction OBJECT-TYPE other(1): When user gets this object, it always returns other(1). start(2): Used to clear port security entries by VLAN on the special port. | 1.3.6.1.4.1.171.12.63.3.3.2.3 | INTEGER {other(1), start(2)} | read-write | current |
| swPortSecEntriesTable OBJECT-TYPE This table is used to show port security entries. | 1.3.6.1.4.1.171.12.63.3.4 | not-accessible | current | |
| swPortSecEntriesEntry OBJECT-TYPE A list of information contained in the swPortSecEntriesTable. | 1.3.6.1.4.1.171.12.63.3.4.1 | not-accessible | current | |
| swPortSecMac OBJECT-TYPE Specifies a MAC address. | 1.3.6.1.4.1.171.12.63.3.4.1.1 | MacAddress | read-only | current |
| swPortSecVID OBJECT-TYPE Indicates the VLAN ID. | 1.3.6.1.4.1.171.12.63.3.4.1.2 | INTEGER (1..4094) | read-only | current |
| swPortSecPort OBJECT-TYPE Indicates the port. | 1.3.6.1.4.1.171.12.63.3.4.1.3 | INTEGER | read-only | current |
| swPortSecDelCtrl OBJECT-TYPE Used to delete this port security entry. Setting this value to 'start' will execute the delete action. Once deleted, the value returns to 'other'. | 1.3.6.1.4.1.171.12.63.3.4.1.4 | INTEGER {other(1), start(2)} | read-write | current |