MIBs Depot

DGS3120-48PC-L2MGMT-MIB

Registered at
1.3.6.1.4.1.171.11.117.6.1.2
Last updated
2013-10-08 10:06
Organization
D-Link Corp.
Namespace
dlink
Source file
DGS3120-48PC-L2MGMT-MIB
Digest
sha256:16d3710e841e7e4af02faebfaea343c42082b042fd5f4905c716af96691a57ac

Description

The Structure of Layer 2 Network Management Information.

Contact

http://support.dlink.com

Imports

FromSymbols
DLINK-ID-REC-MIBAgentNotifyLevel
PORT-SECURITY-MIBswPortSecPortIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue
SWDGS3120PRIMGMT-MIBdlink-Dgs3120Proj-DGS-3120-48PC-bx

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

DGS3120-48PC-L2MGMT-MIB
DLINK-ID-REC-MIB
PORT-SECURITY-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
SWDGS3120PRIMGMT-MIB

Textual conventions

NameOIDSyntaxAccessStatus
IANAifMauAutoNegCapBits
TEXTUAL-CONVENTION
This data type is used as the syntax of the swL2PortAutoNegCapabilityBits, swL2PortAutoNegCapAdvertisedBits, and swL2PortAutoNegCapReceivedBits objects in swL2PortAutoNegTable.
current
MacAddress
type
PortList
type
VlanId
type

Objects

NameOIDSyntaxAccessStatus
swL2DevMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.6.1.2.1
swL2DevInfo
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.6.1.2.1.1
swDevInfoTotalNumOfPort
OBJECT-TYPE
The number of ports within this switch. This value is the sum of the ports within this switch.
1.3.6.1.4.1.171.11.117.6.1.2.1.1.1INTEGER (0..65535)read-onlycurrent
swDevInfoNumOfPortInUse
OBJECT-TYPE
The number of ports in this switch connected to the segment or the end stations.
1.3.6.1.4.1.171.11.117.6.1.2.1.1.2INTEGER (0..65535)read-onlycurrent
swL2DevCtrl
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.6.1.2.1.2
swL2DevCtrlSnmpTrapState
OBJECT-TYPE
This object controls the SNMP trap status.
1.3.6.1.4.1.171.11.117.6.1.2.1.2.5INTEGER {enabled(1), disabled(2)}read-writecurrent
swL2DevCtrlCleanAllStatisticCounter
OBJECT-TYPE
When the object is set to active, all statistical counters will be cleared. If set to normal, no action will occur.
1.3.6.1.4.1.171.11.117.6.1.2.1.2.6INTEGER {normal(1), active(2)}read-writecurrent
swL2DevCtrlVlanIdOfFDBTbl
OBJECT-TYPE
Indicates the VLAN ID to which the Dot1dTpFdbTable belongs; The default value is the DEFAULT_VLAN_ID of the system.
1.3.6.1.4.1.171.11.117.6.1.2.1.2.7VlanIdread-writecurrent
swL2MACNotifyState
OBJECT-TYPE
This object can enable or disable MAC Notification.
1.3.6.1.4.1.171.11.117.6.1.2.1.2.8INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2MACNotifyHistorySize
OBJECT-TYPE
This object indicates the history size of MAC addresses in the MAC Address table. The default value is 1.
1.3.6.1.4.1.171.11.117.6.1.2.1.2.9INTEGER (1..500)read-writecurrent
swL2MACNotifyInterval
OBJECT-TYPE
This object indicates the time interval, in seconds, that will trigger MAC notification messages.
1.3.6.1.4.1.171.11.117.6.1.2.1.2.10INTEGER (1..2147483647)read-writecurrent
swL2DevCtrlAsymVlanState
OBJECT-TYPE
This object enables or disables asymmetric VLANs during the runtime of the system.
1.3.6.1.4.1.171.11.117.6.1.2.1.2.13INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2DevCtrlTelnet
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.6.1.2.1.2.14
swL2DevCtrlTelnetState
OBJECT-TYPE
This object controls the Telnet status.
1.3.6.1.4.1.171.11.117.6.1.2.1.2.14.1INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2DevCtrlTelnetTcpPort
OBJECT-TYPE
This object designates TCP ports. When Telnet is disabled, this object is not accessible.
1.3.6.1.4.1.171.11.117.6.1.2.1.2.14.2INTEGER (1..65535)read-writecurrent
swL2DevCtrlManagementVlanId
OBJECT-TYPE
This object controls which previously created VLANs are included in the System IP Interface.
1.3.6.1.4.1.171.11.117.6.1.2.1.2.16VlanIdread-writecurrent
swL2DevCtrlWeb
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.6.1.2.1.2.17
swL2DevCtrlWebState
OBJECT-TYPE
This object controls the Web status.
1.3.6.1.4.1.171.11.117.6.1.2.1.2.17.1INTEGER {enabled(1), disabled(2)}read-writecurrent
swL2DevCtrlWebTcpPort
OBJECT-TYPE
This object designates TCP ports. When Web is disabled, this object is not accessible.
1.3.6.1.4.1.171.11.117.6.1.2.1.2.17.2INTEGER (1..65535)read-writecurrent
swL2DevCtrlLLDPState
OBJECT-TYPE
Specifies the state of the LLDP function. When this function is enabled, the switch can start to transmit LLDP packets and receive and process the LLDP packets. The specific function of each port will depend on the per port LLDP setting. For the advertisement of LLDP packets, the switch announces the information to its neighbor through ports. For receiving LLDP packets, the switch will learn the information from the LLDP packets advertised from the neighbor in the neighbor table.
1.3.6.1.4.1.171.11.117.6.1.2.1.2.18INTEGER {enabled(1), disabled(2)}read-writecurrent
swL2DevCtrlLLDPForwardMessageState
OBJECT-TYPE
When lldp is disabled and lldp forward_message's are enabled, the LLDP Data Unit packets received by the switch will be forwarded.
1.3.6.1.4.1.171.11.117.6.1.2.1.2.19INTEGER {enabled(1), disabled(2)}read-writecurrent
swL2DevCtrlIpAutoconfig
OBJECT-TYPE
This object controls the IP auto configuration state.
1.3.6.1.4.1.171.11.117.6.1.2.1.2.20INTEGER {enabled(1), disabled(2)}read-writecurrent
swL2DevCtrlCFM
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.6.1.2.1.2.21
swL2DevCtrlCFMState
OBJECT-TYPE
This object indicates the CFM global state.
1.3.6.1.4.1.171.11.117.6.1.2.1.2.21.1INTEGER {enabled(1), disabled(2)}read-writecurrent
swL2DevCtrlCFMPortTable
OBJECT-TYPE
A table containing the CFM state of specified ports.
1.3.6.1.4.1.171.11.117.6.1.2.1.2.21.2not-accessiblecurrent
swL2DevCtrlCFMPortEntry
OBJECT-TYPE
The entry of the CFM state on specified ports.
1.3.6.1.4.1.171.11.117.6.1.2.1.2.21.2.1not-accessiblecurrent
swL2DevCtrlCFMPortIndex
OBJECT-TYPE
This object indicates the port number.
1.3.6.1.4.1.171.11.117.6.1.2.1.2.21.2.1.1INTEGERnot-accessiblecurrent
swL2DevCtrlCFMPortState
OBJECT-TYPE
This object indicates the CFM state by port.
1.3.6.1.4.1.171.11.117.6.1.2.1.2.21.2.1.2INTEGER {enabled(1), disabled(2)}read-writecurrent
swL2DevCtrlVLANTrunkState
OBJECT-TYPE
This indicates the global state of the VLAN trunking feature of the device.
1.3.6.1.4.1.171.11.117.6.1.2.1.2.22INTEGER {enabled(1), disabled(2)}read-writecurrent
swL2DevAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.6.1.2.1.3
swL2DevAlarmNewRoot
OBJECT-TYPE
When the device has become the new root of the Spanning Tree, this object decides whether to send a new root trap.
1.3.6.1.4.1.171.11.117.6.1.2.1.3.1INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2DevAlarmTopologyChange
OBJECT-TYPE
This object determines whether or not to send a trap message when the switch topology changes. If the object is enabled (3), the Topology Change trap is sent by the device when any of its configured ports transition from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. For the same port transition, the device does not send the trap if this object value is disabled or in another state.
1.3.6.1.4.1.171.11.117.6.1.2.1.3.2INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2DevAlarmLinkChange
OBJECT-TYPE
This object determines whether or not to send a trap message when the link changes. If the object is enabled (3), the Link Change trap is sent by the device when any of its port links change. The device does not send the trap if this object value is disabled or in another state.
1.3.6.1.4.1.171.11.117.6.1.2.1.3.3INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2VLANMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.6.1.2.2
swL2VlanStaticTable
OBJECT-TYPE
A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset.
1.3.6.1.4.1.171.11.117.6.1.2.2.1not-accessiblecurrent
swL2VlanStaticEntry
OBJECT-TYPE
Static information for a VLAN configured into this device by (local or network) management.
1.3.6.1.4.1.171.11.117.6.1.2.2.1.1not-accessiblecurrent
swL2VlanIndex
OBJECT-TYPE
The VLAN-ID or other identifier referring to this VLAN.
1.3.6.1.4.1.171.11.117.6.1.2.2.1.1.1VlanIdnot-accessiblecurrent
swL2VLANAdvertisement
OBJECT-TYPE
This object indicates if the advertisement is active or not.
1.3.6.1.4.1.171.11.117.6.1.2.2.1.1.2INTEGER {enabled(1), disabled(2)}read-writecurrent
swL2PVIDAutoAssignmentState
OBJECT-TYPE
This object controls the PVID auto assignment state. If 'Auto-assign PVID' is disabled, the PVID can only be changed by PVID configuration (user changes explicitly). The VLAN configuration will not automatically change the PVID. If 'Auto-assign PVID' is enabled, the PVID will be changed by PVID or VLAN configuration. When a user configures a port to VLAN X's untagged membership, this port's PVID will be updated with VLAN X. Using the VLAN list command, PVID is updated as the last item of the VLAN list. When a user removes a port from the untagged membership of the PVID's VLAN, the port's PVID will be assigned 'default VLAN'.
1.3.6.1.4.1.171.11.117.6.1.2.2.2INTEGER {enabled(1), disabled(2)}read-writecurrent
swL2VlanPortInfoTable
OBJECT-TYPE
A table containing the VLAN and port role information of each port.
1.3.6.1.4.1.171.11.117.6.1.2.2.3not-accessiblecurrent
swL2VlanPortInfoEntry
OBJECT-TYPE
The table entry of VLAN port information.
1.3.6.1.4.1.171.11.117.6.1.2.2.3.1not-accessiblecurrent
swL2VlanPortInfoPortIndex
OBJECT-TYPE
The port index.
1.3.6.1.4.1.171.11.117.6.1.2.2.3.1.1INTEGER (0..65535)read-onlycurrent
swL2VlanPortInfoVid
OBJECT-TYPE
The VLAN ID assigned to a special port
1.3.6.1.4.1.171.11.117.6.1.2.2.3.1.2VlanIdread-onlycurrent
swL2VlanPortInfoPortRole
OBJECT-TYPE
The port role of a special port. When the role is 'other', it means this port does not belong to the VLAN.
1.3.6.1.4.1.171.11.117.6.1.2.2.3.1.3INTEGER {other(1), untagged(2), tagged(3), dynamic(4), forbidden(5)}read-onlycurrent
swL2SubnetVLANTable
OBJECT-TYPE
A table containing the subnet VLAN information.
1.3.6.1.4.1.171.11.117.6.1.2.2.4not-accessiblecurrent
swL2SubnetVLANEntry
OBJECT-TYPE
The entry of subnet VLAN information.
1.3.6.1.4.1.171.11.117.6.1.2.2.4.1not-accessiblecurrent
swL2SubnetVLANIPAddress
OBJECT-TYPE
This object indicates the IP address.
1.3.6.1.4.1.171.11.117.6.1.2.2.4.1.1IpAddressread-onlycurrent
swL2SubnetVLANIPMask
OBJECT-TYPE
This object indicates the IP mask.
1.3.6.1.4.1.171.11.117.6.1.2.2.4.1.2IpAddressread-onlycurrent
swL2SubnetVLANID
OBJECT-TYPE
This object indicates the VLAN ID.
1.3.6.1.4.1.171.11.117.6.1.2.2.4.1.3VlanIdread-createcurrent
swL2SubnetVLANPriority
OBJECT-TYPE
This object indicates the priority.
1.3.6.1.4.1.171.11.117.6.1.2.2.4.1.4INTEGER (0..7)read-createcurrent
swL2SubnetVLANRowStatus
OBJECT-TYPE
This object indicates the status of this entry.
1.3.6.1.4.1.171.11.117.6.1.2.2.4.1.5RowStatusread-createcurrent
swL2VlanPrecedenceTable
OBJECT-TYPE
A table containing the VLAN classification precedence information of each port.
1.3.6.1.4.1.171.11.117.6.1.2.2.5not-accessiblecurrent
swL2VlanPrecedenceEntry
OBJECT-TYPE
The entry of VLAN classification precedence information.
1.3.6.1.4.1.171.11.117.6.1.2.2.5.1not-accessiblecurrent
swL2VlanPrecedencePortIndex
OBJECT-TYPE
This object indicates the port index.
1.3.6.1.4.1.171.11.117.6.1.2.2.5.1.1INTEGER (0..65535)read-onlycurrent
swL2VlanPrecedenceClassification
OBJECT-TYPE
This object indicates the VLAN classification precedence.
1.3.6.1.4.1.171.11.117.6.1.2.2.5.1.2INTEGER {mac-based(1), subnet-based(2)}read-writecurrent
swL2NniGvrpBpduAddress
OBJECT-TYPE
Specifies the GVRP's BPDU MAC address of the NNI port with Q-in-Q status.
1.3.6.1.4.1.171.11.117.6.1.2.2.6INTEGER {dot1d(1), dot1ad(2)}read-writecurrent
swL2PortMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.6.1.2.3
swL2PortInfoTable
OBJECT-TYPE
A table that contains information about every port.
1.3.6.1.4.1.171.11.117.6.1.2.3.1not-accessiblecurrent
swL2PortInfoEntry
OBJECT-TYPE
A list of information for each port of the device.
1.3.6.1.4.1.171.11.117.6.1.2.3.1.1not-accessiblecurrent
swL2PortInfoPortIndex
OBJECT-TYPE
This object indicates the module's port number.(1..Max port number in the module)
1.3.6.1.4.1.171.11.117.6.1.2.3.1.1.1INTEGER (0..65535)read-onlycurrent
swL2PortInfoMediumType
OBJECT-TYPE
Indicates the medium type of the port number.
1.3.6.1.4.1.171.11.117.6.1.2.3.1.1.2INTEGER {copper(1), fiber(2)}read-onlycurrent
swL2PortInfoUnitID
OBJECT-TYPE
Indicates the ID of the unit in the system.
1.3.6.1.4.1.171.11.117.6.1.2.3.1.1.3INTEGER (0..65535)read-onlycurrent
swL2PortInfoType
OBJECT-TYPE
This object indicates the connector type of this port.
1.3.6.1.4.1.171.11.117.6.1.2.3.1.1.4INTEGER {portType-none(0), portType-100Base-T(2), portType-100Base-X(3), portType-1000Base-T(4), portType-1000Base-X(5), portType-10GBase-R(6), portType-10GBase-CX4(7), portType-SIO(8), portType-module-empty(9), portType-user-last(10)}read-onlycurrent
swL2PortInfoLinkStatus
OBJECT-TYPE
This object indicates the port link status.
1.3.6.1.4.1.171.11.117.6.1.2.3.1.1.5INTEGER {other(1), link-pass(2), link-fail(3)}read-onlycurrent
swL2PortInfoNwayStatus
OBJECT-TYPE
This object indicates the port speed and duplex mode.
1.3.6.1.4.1.171.11.117.6.1.2.3.1.1.6INTEGER {link-down(0), full-10Mbps-8023x(1), full-10Mbps-none(2), half-10Mbps-backp(3), half-10Mbps-none(4), full-100Mbps-8023x(5), full-100Mbps-none(6), half-100Mbps-backp(7), half-100Mbps-none(8), full-1Gigabps-8023x(9), full-1Gigabps-none(10), half-1Gigabps-backp(11), half-1Gigabps-none(12), full-10Gigabps-8023x(13), full-10Gigabps-none(14), half-10Gigabps-8023x(15), half-10Gigabps-none(16), empty(17), err-disabled(18)}read-onlycurrent
swL2PortInfoErrorDisabled
OBJECT-TYPE
This object indicates the blocking type of this port.
1.3.6.1.4.1.171.11.117.6.1.2.3.1.1.8INTEGER {none(0), storm(1), stp-lbd(2), ctp-lbd(3), ddm(4), bpdu-protection(5), oam-unidirectional-link(6), power-saving(7), port-security(8), impb(9)}read-onlycurrent
swL2PortCtrlTable
OBJECT-TYPE
A table that contains control information about every port.
1.3.6.1.4.1.171.11.117.6.1.2.3.2not-accessiblecurrent
swL2PortCtrlEntry
OBJECT-TYPE
A list of control information for each port on the device.
1.3.6.1.4.1.171.11.117.6.1.2.3.2.1not-accessiblecurrent
swL2PortCtrlPortIndex
OBJECT-TYPE
This object indicates the module's port number.(1..Max port number in the module)
1.3.6.1.4.1.171.11.117.6.1.2.3.2.1.1INTEGER (0..65535)read-onlycurrent
swL2PortCtrlMediumType
OBJECT-TYPE
Indicates the medium type of the port number.
1.3.6.1.4.1.171.11.117.6.1.2.3.2.1.2INTEGER {copper(1), fiber(2)}read-onlycurrent
swL2PortCtrlUnitIndex
OBJECT-TYPE
Indicates the ID of the unit in the device
1.3.6.1.4.1.171.11.117.6.1.2.3.2.1.3INTEGER (0..65535)read-onlycurrent
swL2PortCtrlAdminState
OBJECT-TYPE
This object decides if the port is enabled or disabled.
1.3.6.1.4.1.171.11.117.6.1.2.3.2.1.4INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2PortCtrlNwayState
OBJECT-TYPE
Chose the port speed, duplex mode, and N-Way function mode.
1.3.6.1.4.1.171.11.117.6.1.2.3.2.1.5INTEGER {other(1), nway-enabled(2), nway-disabled-10Mbps-Half(3), nway-disabled-10Mbps-Full(4), nway-disabled-100Mbps-Half(5), nway-disabled-100Mbps-Full(6), nway-disabled-1Gigabps-Half(7), nway-disabled-1Gigabps-Full(8), nway-disabled-1Gigabps-Full-master(9), nway-disabled-1Gigabps-Full-slave(10)}read-writecurrent
swL2PortCtrlFlowCtrlState
OBJECT-TYPE
The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, the IEEE 802.3x flow control function sends PAUSE frames and receives PAUSE frames.
1.3.6.1.4.1.171.11.117.6.1.2.3.2.1.6INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2PortCtrlLearningState
OBJECT-TYPE
This object decides if the port is locked or not.
1.3.6.1.4.1.171.11.117.6.1.2.3.2.1.7INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2PortCtrlMACNotifyState
OBJECT-TYPE
This object sets each port's MAC notification state.
1.3.6.1.4.1.171.11.117.6.1.2.3.2.1.8INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2PortCtrlMDIXState
OBJECT-TYPE
This object configures the MDIX setting of the port.
1.3.6.1.4.1.171.11.117.6.1.2.3.2.1.10INTEGER {auto(1), normal(2), cross(3)}read-writecurrent
swL2PortCtrlAutoSpeedDowngradeState
OBJECT-TYPE
This object configures the auto-speed-downgrade setting of the port.
1.3.6.1.4.1.171.11.117.6.1.2.3.2.1.13INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2PortCtrlJumboFrame
OBJECT-TYPE
This object configures the switch's jumbo frame settings.
1.3.6.1.4.1.171.11.117.6.1.2.3.3INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2PortCtrlJumboFrameMaxSize
OBJECT-TYPE
This object describes how many bytes the max jumbo frame is.
1.3.6.1.4.1.171.11.117.6.1.2.3.4INTEGERread-onlycurrent
swL2PortCounterCtrlTable
OBJECT-TYPE
A table that is used to clear counter information about every port.
1.3.6.1.4.1.171.11.117.6.1.2.3.6not-accessiblecurrent
swL2PortCounterCtrlEntry
OBJECT-TYPE
A list of entries used to clear the counter information for each port of the device.
1.3.6.1.4.1.171.11.117.6.1.2.3.6.1not-accessiblecurrent
swL2PortCounterCtrlPortIndex
OBJECT-TYPE
This object indicates the module's port number.(1..Max port number in the module)
1.3.6.1.4.1.171.11.117.6.1.2.3.6.1.1INTEGER (0..65535)read-onlycurrent
swL2PortCounterClearCtrl
OBJECT-TYPE
This object indicates whether to clear the counters for each port of the device or not.
1.3.6.1.4.1.171.11.117.6.1.2.3.6.1.2INTEGER {other(1), start(2)}read-writecurrent
swL2PortSfpInfoTable
OBJECT-TYPE
A table that contains information for each sfp pluged in port.
1.3.6.1.4.1.171.11.117.6.1.2.3.11not-accessiblecurrent
swL2PortSfpInfoEntry
OBJECT-TYPE
A list of information for each sfp pluged in port.
1.3.6.1.4.1.171.11.117.6.1.2.3.11.1not-accessiblecurrent
swL2PortSfpInfoPortIndex
OBJECT-TYPE
This object indicates the module's port number.(1..Max port number in the module)
1.3.6.1.4.1.171.11.117.6.1.2.3.11.1.1INTEGER (0..65535)read-onlycurrent
swL2PortSfpInfoConnectType
OBJECT-TYPE
The ConnectType of sfp informaiton.
1.3.6.1.4.1.171.11.117.6.1.2.3.11.1.2DisplayString (SIZE(1..10))read-onlycurrent
swL2PortSfpInfoVendorName
OBJECT-TYPE
The vendor name of sfp informaiton.
1.3.6.1.4.1.171.11.117.6.1.2.3.11.1.3DisplayString (SIZE(1..16))read-onlycurrent
swL2PortSfpInfoVendorPN
OBJECT-TYPE
The vendor PN of sfp informaiton.
1.3.6.1.4.1.171.11.117.6.1.2.3.11.1.4DisplayString (SIZE(1..16))read-onlycurrent
swL2PortSfpInfoVendorSN
OBJECT-TYPE
The vendor SN of sfp informaiton.
1.3.6.1.4.1.171.11.117.6.1.2.3.11.1.5DisplayString (SIZE(1..16))read-onlycurrent
swL2PortSfpInfoVendorOUI
OBJECT-TYPE
The vendor OUI of sfp information.
1.3.6.1.4.1.171.11.117.6.1.2.3.11.1.6DisplayString (SIZE(1..6))read-onlycurrent
swL2PortSfpInfoVendorRev
OBJECT-TYPE
The vendor Rev of sfp information.
1.3.6.1.4.1.171.11.117.6.1.2.3.11.1.7DisplayString (SIZE(1..4))read-onlycurrent
swL2PortSfpInfoDateCode
OBJECT-TYPE
The date code of sfp information.
1.3.6.1.4.1.171.11.117.6.1.2.3.11.1.8DisplayString (SIZE(1..8))read-onlycurrent
swL2PortSfpInfoFiberType
OBJECT-TYPE
The fiber type of sfp information.
1.3.6.1.4.1.171.11.117.6.1.2.3.11.1.9DisplayString (SIZE(1..25))read-onlycurrent
swL2PortSfpInfoBaudRate
OBJECT-TYPE
The baud rate of sfp information.
1.3.6.1.4.1.171.11.117.6.1.2.3.11.1.10INTEGER (0..65535)read-onlycurrent
swL2PortSfpInfoWavelength
OBJECT-TYPE
The wavelength of sfp information.
1.3.6.1.4.1.171.11.117.6.1.2.3.11.1.11INTEGER (0..65535)read-onlycurrent
swL2TrunkMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.6.1.2.9
swL2TrunkMaxSupportedEntries
OBJECT-TYPE
Maximum number of entries in the trunk configuration table (swL2TrunkCtrlTable).
1.3.6.1.4.1.171.11.117.6.1.2.9.1INTEGER (0..65535)read-onlycurrent
swL2TrunkCurrentNumEntries
OBJECT-TYPE
Current active number of entries in the trunk configuration table.
1.3.6.1.4.1.171.11.117.6.1.2.9.2INTEGER (0..65535)read-onlycurrent
swL2TrunkCtrlTable
OBJECT-TYPE
This table specifies information about the logical port trunk groups.
1.3.6.1.4.1.171.11.117.6.1.2.9.3not-accessiblecurrent
swL2TrunkCtrlEntry
OBJECT-TYPE
A list of information about each logical port trunk group.
1.3.6.1.4.1.171.11.117.6.1.2.9.3.1not-accessiblecurrent
swL2TrunkIndex
OBJECT-TYPE
The index number of the logical port trunk group. The trunk group number depends on the existence of unit and module.
1.3.6.1.4.1.171.11.117.6.1.2.9.3.1.1INTEGER (0..65535)read-onlycurrent
swL2TrunkMasterPort
OBJECT-TYPE
This object indicates the master port number of the port trunk entry. When using Port Trunking, you cannot configure the other ports of the group except the master port. Their configuration must be the same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on).
1.3.6.1.4.1.171.11.117.6.1.2.9.3.1.3INTEGER (1..65535)read-createcurrent
swL2TrunkMember
OBJECT-TYPE
Indicates the number of ports included in this Trunk group. The trunk port number depends on the existence of the module. The maximum number of ports is 8 for one trunk group.
1.3.6.1.4.1.171.11.117.6.1.2.9.3.1.4PortListread-createcurrent
swL2TrunkFloodingPort
OBJECT-TYPE
The object indicates the flooding port number of the port trunk entry. The first port of the Trunk group is implicitly configured to be the flooding port.
1.3.6.1.4.1.171.11.117.6.1.2.9.3.1.5INTEGER (1..65535)read-onlycurrent
swL2TrunkType
OBJECT-TYPE
This object indicates the type of trunk group. static: is a static trunk group lacp: is a LACP trunk group.
1.3.6.1.4.1.171.11.117.6.1.2.9.3.1.6INTEGER {other(1), static(2), lacp(3)}read-createcurrent
swL2TrunkState
OBJECT-TYPE
This object indicates the status of this entry.
1.3.6.1.4.1.171.11.117.6.1.2.9.3.1.7RowStatusread-createcurrent
swL2TrunkAlgorithm
OBJECT-TYPE
This object configures part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data.
1.3.6.1.4.1.171.11.117.6.1.2.9.4INTEGER {other(1), mac-source(2), mac-destination(3), mac-source-dest(4), ip-source(5), ip-destination(6), ip-source-dest(7), l4-source-port(8), l4-destination-port(9), l4-source-dest-port(10)}read-writecurrent
swL2TrunkLACPPortTable
OBJECT-TYPE
This table specifies which ports are grouped together (this can be up to 8 ports) into a single logical link.
1.3.6.1.4.1.171.11.117.6.1.2.9.5not-accessiblecurrent
swL2TrunkLACPPortEntry
OBJECT-TYPE
A list of information specifying which ports are grouped together (this can be up to 8 ports) into a single logical link.
1.3.6.1.4.1.171.11.117.6.1.2.9.5.1not-accessiblecurrent
swL2TrunkLACPPortIndex
OBJECT-TYPE
The index of logical port LACP.
1.3.6.1.4.1.171.11.117.6.1.2.9.5.1.1INTEGER (0..65535)read-onlycurrent
swL2TrunkLACPPortState
OBJECT-TYPE
The state of a logical port LACP.
1.3.6.1.4.1.171.11.117.6.1.2.9.5.1.2INTEGER {active(1), passive(2)}read-writecurrent
swL2TrunkVLANTable
OBJECT-TYPE
This table is used to manage the VLAN trunking feature of the device.
1.3.6.1.4.1.171.11.117.6.1.2.9.6not-accessiblecurrent
swL2TrunkVLANEntry
OBJECT-TYPE
This object is used to configure the VLAN trunking settings for each port.
1.3.6.1.4.1.171.11.117.6.1.2.9.6.1not-accessiblecurrent
swL2TrunkVLANPort
OBJECT-TYPE
This object indicates the port being configured.
1.3.6.1.4.1.171.11.117.6.1.2.9.6.1.1INTEGER (0..65535)read-onlycurrent
swL2TrunkVLANState
OBJECT-TYPE
The state of the logical port VLAN trunk.
1.3.6.1.4.1.171.11.117.6.1.2.9.6.1.2INTEGER {enabled(1), disabled(2)}read-writecurrent
swL2MirrorMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.6.1.2.10
swL2MirrorLogicTargetPort
OBJECT-TYPE
This object indicates which switch port will sniff another port. A trunk port member cannot be configured as a target snooping port. The port number is the sequential (logical) number, which is also applied to the bridge MIB, etc.
1.3.6.1.4.1.171.11.117.6.1.2.10.1INTEGER (0..65535)read-writecurrent
swL2MirrorPortSourceIngress
OBJECT-TYPE
This represents the port where ingress packets will be sniffed.
1.3.6.1.4.1.171.11.117.6.1.2.10.2PortListread-writecurrent
swL2MirrorPortSourceEgress
OBJECT-TYPE
This represents the port where egress packets will be sniffed.
1.3.6.1.4.1.171.11.117.6.1.2.10.3PortListread-writecurrent
swL2MirrorPortState
OBJECT-TYPE
This object indicates the port mirroring state. other (1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled (2) - After writing this value to the object, the corresponding entry will be removed from the table. enabled (3) - This entry resides in the table.
1.3.6.1.4.1.171.11.117.6.1.2.10.4INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2MirrorGroupTable
OBJECT-TYPE
This table specifies information about the Mirror group configuration.
1.3.6.1.4.1.171.11.117.6.1.2.10.5not-accessiblecurrent
swL2MirrorGroupEntry
OBJECT-TYPE
A list of information about each Mirror group configuration.
1.3.6.1.4.1.171.11.117.6.1.2.10.5.1not-accessiblecurrent
swL2MirrorGroupID
OBJECT-TYPE
This object indicates the mirror group. The range of this object is (1..n), the value of n depends on detail project.
1.3.6.1.4.1.171.11.117.6.1.2.10.5.1.1INTEGERnot-accessiblecurrent
swL2MirrorGroupRowStatus
OBJECT-TYPE
This object manages this mirror group entry.
1.3.6.1.4.1.171.11.117.6.1.2.10.5.1.2RowStatusread-createcurrent
swL2MirrorGroupState
OBJECT-TYPE
This object indicates the mirror group state.
1.3.6.1.4.1.171.11.117.6.1.2.10.5.1.3INTEGER {other(1), disabled(2), enabled(3)}read-createcurrent
swL2MirrorGroupLogicTargetPort
OBJECT-TYPE
This object indicates the mirror group target port.
1.3.6.1.4.1.171.11.117.6.1.2.10.5.1.4INTEGER (0..65535)read-createcurrent
swL2MirrorGroupPortSourceIngress
OBJECT-TYPE
This object indicates the mirror group ingress source ports.
1.3.6.1.4.1.171.11.117.6.1.2.10.5.1.5PortListread-createcurrent
swL2MirrorGroupPortSourceEngress
OBJECT-TYPE
This object indicates the mirror group engress source ports.
1.3.6.1.4.1.171.11.117.6.1.2.10.5.1.6PortListread-createcurrent
swL2IGMPMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.6.1.2.11
swL2IGMPAccessAuthTable
OBJECT-TYPE
This table is used to manage the IGMP Access Authentication configurations of the device.
1.3.6.1.4.1.171.11.117.6.1.2.11.13not-accessiblecurrent
swL2IGMPAccessAuthEntry
OBJECT-TYPE
A list of manageable entities for IGMP Access Authentication. The configuration is done per port.
1.3.6.1.4.1.171.11.117.6.1.2.11.13.1not-accessiblecurrent
swL2IGMPAccessAuthPort
OBJECT-TYPE
The index of the swL2IGMPAccessAuthTable. This object corresponds to the port being configured.
1.3.6.1.4.1.171.11.117.6.1.2.11.13.1.1INTEGERread-onlycurrent
swL2IGMPAccessAuthState
OBJECT-TYPE
This object denotes the status of IGMP Access Authentication of the port.
1.3.6.1.4.1.171.11.117.6.1.2.11.13.1.2INTEGER {enabled(1), disabled(2)}read-writecurrent
swL2TrafficSegMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.6.1.2.14
swL2TrafficSegTable
OBJECT-TYPE
This table specifies that the port can just forward traffic to the specific port list.
1.3.6.1.4.1.171.11.117.6.1.2.14.1not-accessiblecurrent
swL2TrafficSegEntry
OBJECT-TYPE
A list of information which specifies the port with its traffic forwarding list.
1.3.6.1.4.1.171.11.117.6.1.2.14.1.1not-accessiblecurrent
swL2TrafficSegPort
OBJECT-TYPE
The port number of the logical port.
1.3.6.1.4.1.171.11.117.6.1.2.14.1.1.1INTEGER (0..65535)read-onlycurrent
swL2TrafficSegForwardPorts
OBJECT-TYPE
The port list where a specific port can forward traffic.
1.3.6.1.4.1.171.11.117.6.1.2.14.1.1.2PortListread-writecurrent
swL2MulticastFilterMode
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.6.1.2.17
swL2MulticastFilterModeVlanTable
OBJECT-TYPE
A table that contains information about the VLAN multicast filter mode.
1.3.6.1.4.1.171.11.117.6.1.2.17.1not-accessiblecurrent
swL2MulticastFilterModeVlanEntry
OBJECT-TYPE
A list of multicast filter mode information for each VLAN.
1.3.6.1.4.1.171.11.117.6.1.2.17.1.1not-accessiblecurrent
swL2MulticastFilterVid
OBJECT-TYPE
Indicates the VID for each VLAN.
1.3.6.1.4.1.171.11.117.6.1.2.17.1.1.1INTEGER (1..65535)read-onlycurrent
swL2MulticastFilterVlanMode
OBJECT-TYPE
Specifies the multicast filter mode for each VLAN.
1.3.6.1.4.1.171.11.117.6.1.2.17.1.1.2INTEGER {forward-all-groups(1), forward-unregistered-groups(2), filter-unregistered-groups(3)}read-writecurrent
swL2DhcpLocalRelayMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.6.1.2.24
swL2DhcpLocalRelayState
OBJECT-TYPE
This object indicates the status of the DHCP local relay function of the switch.
1.3.6.1.4.1.171.11.117.6.1.2.24.1INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2DhcpLocalRelayVLANTable
OBJECT-TYPE
This table is used to manage the DHCP local relay status for each VLAN.
1.3.6.1.4.1.171.11.117.6.1.2.24.2not-accessiblecurrent
swL2DhcpLocalRelayVLANEntry
OBJECT-TYPE
This object lists the current VLANs in the switch and their corresponding DHCP local relay status.
1.3.6.1.4.1.171.11.117.6.1.2.24.2.1not-accessiblecurrent
swL2DhcpLocalRelayVLANID
OBJECT-TYPE
This object shows the VIDs of the current VLANS in the switch.
1.3.6.1.4.1.171.11.117.6.1.2.24.2.1.1INTEGER (1..4094)read-onlycurrent
swL2DhcpLocalRelayVLANState
OBJECT-TYPE
This object indicates the status of the DHCP relay function of the VLAN.
1.3.6.1.4.1.171.11.117.6.1.2.24.2.1.2INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swL2MgmtMIBTraps
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.6.1.2.100
swL2Notify
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.6.1.2.100.1
swL2NotifyMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.6.1.2.100.1.1
swL2macNotificationSeverity
OBJECT-TYPE
Indicates the level of macNotification detection.
1.3.6.1.4.1.171.11.117.6.1.2.100.1.1.1AgentNotifyLevelread-writecurrent
swL2PortSecurityViolationSeverity
OBJECT-TYPE
Indicates the level of PortSecurityViolation detection.
1.3.6.1.4.1.171.11.117.6.1.2.100.1.1.2AgentNotifyLevelread-writecurrent
swL2NotifyPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.6.1.2.100.1.2
swL2NotifFirmware
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.6.1.2.100.1.2.0
swl2NotificationBidings
OBJECT-IDENTITY
1.3.6.1.4.1.171.11.117.6.1.2.100.1.2.1
swL2macNotifyInfo
OBJECT-TYPE
This object indicates information about the last time the system rebooted.
1.3.6.1.4.1.171.11.117.6.1.2.100.1.2.1.1OCTET STRING (SIZE(0..1024))read-onlycurrent
swL2PortSecurityViolationMac
OBJECT-TYPE
This object indicates the MAC address that violated the port security configuration.
1.3.6.1.4.1.171.11.117.6.1.2.100.1.2.1.2MacAddressaccessible-for-notifycurrent

Notifications

NameOIDStatus
swL2macNotification
NOTIFICATION-TYPE
This trap indicates the MAC address variations in the address table .
1.3.6.1.4.1.171.11.117.6.1.2.100.1.2.0.1current
swL2PortSecurityViolationTrap
NOTIFICATION-TYPE
When the port_security trap is enabled, new MAC addresses that violate the pre-defined port security configuration will trigger trap messages to be sent out.
1.3.6.1.4.1.171.11.117.6.1.2.100.1.2.0.2current