MIBs Depot

PDN-SYSLOG-MIB

Registered at
1.3.6.1.4.1.1795.2.24.2.31.1
1.3.6.1.4.1.1795.2.24.2.31.14
Last updated
2003-02-13 00:00
Organization
Paradyne Networks MIB Working Group
Revisions
2003-02-13 00:00, 2001-11-15 00:00, 2001-04-10 00:00, 2001-08-09 00:00, 2000-04-24 00:00, 2000-02-05 00:00
Namespace
zhone
Source file
PDN-SYSLOG-MIB
Digest
sha256:d15624672a0636542455879f5573369879a45d912e79d67af17d4ebd3bf458a6

Description

1)Added pdnEntitySyslogTable to be used for entities 2)Added conformance statements.

Contact

Paradyne Networks, Inc. 8545 126th Avenue North Largo, FL 33733 www.paradyne.com General Comments to: mibwg_team@eng.paradyne.com Editor: Dragana Gough - Original Author Editor: Mike Himelstein - Updated Mib Editor: Jesus Pinto - Updated Mib

Imports

FromSymbols
ENTITY-MIBentPhysicalIndex
PDN-HEADER-MIBpdn-syslog
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ENTITY-MIB
IANA-ENTITY-MIB
PDN-HEADER-MIB
PDN-SYSLOG-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
UUID-TC-MIB

Objects

NameOIDSyntaxAccessStatus
pdnSyslogStatus
OBJECT-TYPE
This value allows user to disable or enable syslog event generation.
1.3.6.1.4.1.1795.2.24.2.31.1.1INTEGER {disable(1), enable(2)}read-writecurrent
pdnSyslogIPAddr
OBJECT-TYPE
This value is the IP address of a syslog server. If the ip address is known then this can be used for the remote syslog daemon
1.3.6.1.4.1.1795.2.24.2.31.1.2IpAddressread-writecurrent
pdnSyslogLevel
OBJECT-TYPE
This value corresponds to a minimum severity level of events that will be logged.
1.3.6.1.4.1.1795.2.24.2.31.1.3INTEGER {emerg(1), err(2), norm(3), info(4)}read-writedeprecated
pdnSyslogPort
OBJECT-TYPE
This value corresponds to a UDP port number to which system events are sent. The default is 514.
1.3.6.1.4.1.1795.2.24.2.31.1.4Integer32read-writecurrent
pdnSyslogSeverityThreshold
OBJECT-TYPE
This value corresponds to a minimum severity level that a syslog messages can be set. All syslog message with an enum value greater than the threshold will not be sent. The values are obtain from the RFC 3164 The BSD Syslog Protocol: emerg (0) - Emergency: system is unusable alert (1) - Alert: action must be taken immediately critical (2) - Critical: critical conditions error (3) - Error: error conditions warning (4) - Warning: warning conditions notice (5) - Notice: normal but significant condition info (6) - Informational: informational messages debug (7) - Debug: debug-level messages For a more complete description of the severity levels, please reference your Operation Specification Manual for details pertaining to that product.
1.3.6.1.4.1.1795.2.24.2.31.1.5INTEGER {emerg(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7)}read-writecurrent
pdnSyslogRemoteDaemon
OBJECT-TYPE
This value allows user to disable or enable syslog messages going to a remote daemon.
1.3.6.1.4.1.1795.2.24.2.31.1.6INTEGER {disable(1), enable(2)}read-writecurrent
pdnSyslogTable
OBJECT-TYPE
This table supports retrieval of the syslog messages.
1.3.6.1.4.1.1795.2.24.2.31.1.7not-accessiblecurrent
pdnSyslogEntry
OBJECT-TYPE
An entry in the pdnSyslogTable.
1.3.6.1.4.1.1795.2.24.2.31.1.7.1not-accessiblecurrent
pdnSyslogNumber
OBJECT-TYPE
This is a sequentially increasing index of syslog messages starting at 1. When the table reaches its maximum size (as defined by pdnSyslogMaxTableSize) then the oldest message will be dropped without renumbering any messages that remain. The index is reset to 1 on a device reset or when the table is cleared (using pdnSyslogClearTable).
1.3.6.1.4.1.1795.2.24.2.31.1.7.1.1Integer32not-accessiblecurrent
pdnSyslogMessage
OBJECT-TYPE
The text of the syslog message.
1.3.6.1.4.1.1795.2.24.2.31.1.7.1.2OCTET STRING (SIZE(1024))read-onlycurrent
pdnSyslogNumOfMsgInTable
OBJECT-TYPE
This value let the users know how many syslog messages are currently in the syslog table.
1.3.6.1.4.1.1795.2.24.2.31.1.8Integer32read-onlycurrent
pdnSyslogMaxTableSize
OBJECT-TYPE
The maximum number of syslog message the syslog table can hold.
1.3.6.1.4.1.1795.2.24.2.31.1.9Integer32read-onlycurrent
pdnSyslogClearTable
OBJECT-TYPE
Clears all the entries in the syslog message table.
1.3.6.1.4.1.1795.2.24.2.31.1.10INTEGER {noOp(1), clear(2)}read-writecurrent
pdnSyslogMsgToConsole
OBJECT-TYPE
This allows messages to be sent to the device's console port. Note this is intended for debug use only! It is not recommended to be used to monitor syslog message on a regular bases. If one needs to constantly monitor the syslog messages, then they should use the remote syslog daemon, or other user interfaces.
1.3.6.1.4.1.1795.2.24.2.31.1.11INTEGER {disable(1), enable(2)}read-writecurrent
pdnSyslogRateLimiting
OBJECT-TYPE
This allows one to enable or disable rate limitiming. When rate limiting is enabled, it prevents the exact same message from being resent within a fixed amount of time.
1.3.6.1.4.1.1795.2.24.2.31.1.12INTEGER {disable(1), enable(2)}read-writecurrent
pdnEntitySyslogTable
OBJECT-TYPE
This table supports retrieval of the syslog messages. Each entry corresponds to a message being generated by (or on behalf of) an entity (e.g. port card).
1.3.6.1.4.1.1795.2.24.2.31.1.13not-accessiblecurrent
pdnEntitySyslogEntry
OBJECT-TYPE
An entry in the pdnEntitySyslogTable
1.3.6.1.4.1.1795.2.24.2.31.1.13.1not-accessiblecurrent
pdnEntitySyslogNumber
OBJECT-TYPE
This is a sequentially increasing index of syslog messages starting at 1. When the table reaches its maximum size (as defined by pdnSyslogMaxTableSize) then the oldest message will be dropped without renumbering any messages that remain. The index is reset to 1 on a device reset or when the table is cleared (using pdnSyslogClearTable).
1.3.6.1.4.1.1795.2.24.2.31.1.13.1.1Integer32not-accessiblecurrent
pdnEntitySyslogMessage
OBJECT-TYPE
The text of the syslog message.
1.3.6.1.4.1.1795.2.24.2.31.1.13.1.2OCTET STRING (SIZE(1024))read-onlycurrent
pdnSyslogConformance
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.31.14
pdnSyslogCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.31.14.1
pdnSyslogGroups
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.31.14.2

Conformance

NameOIDStatus
pdnSyslogCompliance
MODULE-COMPLIANCE
The compliance statement for configurable attributes for syslog manager.
1.3.6.1.4.1.1795.2.24.2.31.14.1.1current
pdnSyslogGroup
OBJECT-GROUP
A collection of objects that permits configuration and display of syslog messages generated.
1.3.6.1.4.1.1795.2.24.2.31.14.2.1current
pdnSyslogOptionalGroup
OBJECT-GROUP
A collection of syslog messages classified per entities.
1.3.6.1.4.1.1795.2.24.2.31.14.2.2current
pdnSyslogDeprecatedGroup
OBJECT-GROUP
Objects being deprecated should be added to this group
1.3.6.1.4.1.1795.2.24.2.31.14.2.3deprecated