PDN-MPE-DSLAM-SYSTEM-MIB
- Registered at
- 1.3.6.1.4.1.1795.2.24.12.24
- Last updated
- 2004-05-13 14:00
- Organization
- Paradyne Corporation MIB Working Group
- Revisions
- 2004-05-13 14:00, 2005-04-08 14:00, 2003-06-06 00:00, 2003-04-25 00:00, 2003-04-18 00:00, 2003-03-20 15:00, 2003-03-07 00:00, 2002-10-25 00:00, 2002-08-15 00:00, 2002-02-21 00:00, 2002-01-28 00:00, 2000-01-22 00:00
- Namespace
- zhone
- Source file
PDN-MPE-DSLAM-SYSTEM-MIB- Digest
sha256:e91d5bf6afa008cfe9ef663067fe7ec838f74f8b3ba5a3196b51f4fa04d77c97
Description
The mpe dslam MIB. This MIB is written specifically to extend entPhysicalTable.
Contact
Paradyne Corporation 8545 126th Avenue North Largo, FL 33733 www.paradyne.com General Comments to: mibwg_team@paradyne.com Editors Prakash Easwar Jesus Pinto Dragana Gough Clay Sikes
Imports
| From | Symbols |
|---|---|
| ENTITY-MIB | entPhysicalEntry, entPhysicalIndex |
| PDN-HEADER-MIB | pdn-mpe |
| PDN-MPE-MIB2-MIB | mpeSysObjectID |
| PDN-TC | ContactState |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ENTITY-MIB IANA-ENTITY-MIB PDN-HEADER-MIB PDN-MPE-DSLAM-SYSTEM-MIB PDN-MPE-MIB2-MIB PDN-TC SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC UUID-TC-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| MpeEntExtAdminStatus TEXTUAL-CONVENTION Values to support the desired state of the entity. These values were selected to correspond to the syntax of the ifAdminStatus in the IF-MIB. | current | |||
| MpeEntExtOperStatus TEXTUAL-CONVENTION Values to support the current operational state of the entity. These values were selected to correspond to the syntax of the ifOperStatus in the IF-MIB. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| mpeSysDevDslamMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.12.24.1 | |||
| mpeEntExtAlarms OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.12.24.1.1 | |||
| mpeEntExtAlarmTable OBJECT-TYPE This table lists the alarm states of the objects listed in the entity-MIB entPhysicalTable. | 1.3.6.1.4.1.1795.2.24.12.24.1.1.1 | not-accessible | current | |
| mpeEntExtAlarmEntry OBJECT-TYPE An mpeEntExtAlarmTable entry indicates the alarm state of the physical entity. | 1.3.6.1.4.1.1795.2.24.12.24.1.1.1.1 | not-accessible | current | |
| mpeEntExtAlarm OBJECT-TYPE This variable indicates the alarm state of the physical entity. | 1.3.6.1.4.1.1795.2.24.12.24.1.1.1.1.1 | TruthValue | read-only | current |
| mpeAlarmRelay OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.12.24.1.2 | |||
| mpeAlarmRelayEquipIndex OBJECT-TYPE This variable is the index of the equipment whose alarms are being relayed. It is a integer number starting from 1 until the max number of physical connectors the DSLAM device has to support relay. NOTE: This object has been deprecated. Please consider using the mpeAlarmRelayTable and mpeAlarmRelayInputStateChanged objects. | 1.3.6.1.4.1.1795.2.24.12.24.1.2.1 | Integer32 | accessible-for-notify | deprecated |
| mpeAlarmRelayInputContactState OBJECT-TYPE This variable indicates the alarm state of the Input Contact (open/closed). NOTE: This object has been deprecated. Please consider using the mpeAlarmRelayTable and mpeAlarmRelayInputStateChanged objects. | 1.3.6.1.4.1.1795.2.24.12.24.1.2.2 | ContactState | accessible-for-notify | deprecated |
| mpeAlarmRelayTable OBJECT-TYPE This table holds objects that relate to Alarm Relay input or output. | 1.3.6.1.4.1.1795.2.24.12.24.1.2.3 | not-accessible | current | |
| mpeAlarmRelayEntry OBJECT-TYPE An entry in this table is a sparse augmentation of the entPhysicalEntry. As such, it is indexed by the entPhysicalIndex and not an augmentation of the entPhysicalTable. | 1.3.6.1.4.1.1795.2.24.12.24.1.2.3.1 | not-accessible | current | |
| mpeAlarmRelayState OBJECT-TYPE This object is used to read or write the state an alarm relay input or output. | 1.3.6.1.4.1.1795.2.24.12.24.1.2.3.1.1 | ContactState | read-write | current |
| mpeEntExtMibObjects OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.12.24.1.3 | |||
| mpeEntPhysicalExtTable OBJECT-TYPE This table contains entity information that is not defined in the standard ENTITY-MIB. | 1.3.6.1.4.1.1795.2.24.12.24.1.3.1 | not-accessible | current | |
| mpeEntPhysicalExtEntry OBJECT-TYPE An entry extends the entPhysicalEntry defined in the ENTITY-MIB. | 1.3.6.1.4.1.1795.2.24.12.24.1.3.1.1 | not-accessible | current | |
| mpeEntPhysicalExtUpTime OBJECT-TYPE The time (in hundredths of a second --just like the sysUpTime) since the entity was last re-initialized. | 1.3.6.1.4.1.1795.2.24.12.24.1.3.1.1.1 | TimeTicks | read-only | current |
| mpeEntPhysicalExtLocation OBJECT-TYPE This object allows the manager to enter the location of the physical entity where applicable. For example, in a stack, chassis or units may be in different locations. In this case, it would be logical for the manager to set this object to the location of the associated chassis. Where the location doesn't make sense, it is recommended that the object return a zero-length string. | 1.3.6.1.4.1.1795.2.24.12.24.1.3.1.1.2 | SnmpAdminString | read-write | current |
| mpeEntPhysicalExtAdminStatus OBJECT-TYPE The desired state of the entity. | 1.3.6.1.4.1.1795.2.24.12.24.1.3.1.1.3 | MpeEntExtAdminStatus | read-write | current |
| mpeEntPhysicalExtOperStatus OBJECT-TYPE The current operational state of the entity. | 1.3.6.1.4.1.1795.2.24.12.24.1.3.1.1.4 | MpeEntExtOperStatus | read-only | current |
| mpeSysDevDslamMIBTraps OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.12.24.2 | |||
| mpeSysDevDslamMIBNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.12.24.2.0 | |||
| mpeSysDevDslamConformance OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.12.24.3 | |||
| mpeSysDevDslamGroups OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.12.24.3.1 | |||
| mpeSysDevDslamCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.12.24.3.2 | |||
| mpeSysDevDslamDeprecatedGroup OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.12.24.3.3 |
Notifications
| Name | OID | Status |
|---|---|---|
| mpeAlarmRelayInputStateChanged NOTIFICATION-TYPE This trap signifies that the state of the Alarm Relay Input has changed. | 1.3.6.1.4.1.1795.2.24.12.24.2.0.26 | current |
| mpeFanEntityModuleFailure NOTIFICATION-TYPE This trap indicates the failure of the fan module on the device. | 1.3.6.1.4.1.1795.2.24.12.24.2.0.27 | current |
| mpeFanEntityModuleOperational NOTIFICATION-TYPE This trap indicates the indicates the fan module on the device is back to operational. | 1.3.6.1.4.1.1795.2.24.12.24.2.0.28 | current |
| mpePowerSourceAFailure NOTIFICATION-TYPE This trap indicates that power source A has failed. | 1.3.6.1.4.1.1795.2.24.12.24.2.0.29 | current |
| mpePowerSourceBFailure NOTIFICATION-TYPE This trap indicates that power source B has failed. | 1.3.6.1.4.1.1795.2.24.12.24.2.0.30 | current |
| mpePowerSourceAOperational NOTIFICATION-TYPE This trap indicates that the power source A is operational. This trap compliments powerSourceAFailure trap. | 1.3.6.1.4.1.1795.2.24.12.24.2.0.31 | current |
| mpePowerSourceBOperational NOTIFICATION-TYPE This trap indicates that the power source B is operational. This trap compliments powerSourceBFailure trap. | 1.3.6.1.4.1.1795.2.24.12.24.2.0.32 | current |
| mpeCcn NOTIFICATION-TYPE This trap signifies a Configuration change or software upgrade in the xDSL card. This trap is of 'warning' class | 1.3.6.1.4.1.1795.2.24.12.24.2.7 | current |
| mpeDeviceFailure NOTIFICATION-TYPE This trap signifies that the sending protocol's device has failed and the failure was not a result of a device test. Note there are no variable bindings for this trap | 1.3.6.1.4.1.1795.2.24.12.24.2.15 | current |
| mpeDeviceFailureCleared NOTIFICATION-TYPE This trap signifies that the sending protocol's device has failed but now it is operational. Failure was not a result of a device test. | 1.3.6.1.4.1.1795.2.24.12.24.2.16 | current |
| mpeNonSupportedMCC NOTIFICATION-TYPE AN has detected MCC firmware release too low to support this device | 1.3.6.1.4.1.1795.2.24.12.24.2.20 | current |
| mpeNonSupportedChassis NOTIFICATION-TYPE AN in slot xx has been installed in a chassis that cannot support one or more of its features. | 1.3.6.1.4.1.1795.2.24.12.24.2.21 | current |
| mpeAlarmRelayInputContactStateChanged NOTIFICATION-TYPE This trap signifies that the state of the InputContact Alarm has changed since last time. NOTE: This object has been deprecated. Please consider using the mpeAlarmRelayInputStateChanged notification. | 1.3.6.1.4.1.1795.2.24.12.24.2.22 | deprecated |
| mpeEntPhysicalExtEntityCreated NOTIFICATION-TYPE This trap signifies that an instance of this entity has been created in the entPhysicalTable. This trap is generated in addition to the entConfigChange notification defined in RFC2737. | 1.3.6.1.4.1.1795.2.24.12.24.2.23 | current |
| mpeEntPhysicalExtEntityDeleted NOTIFICATION-TYPE This trap signifies that an instance of this entity has been deleted from the entPhysicalTable. This trap is generated in addition to the entConfigChange notification defined in RFC2737. | 1.3.6.1.4.1.1795.2.24.12.24.2.24 | current |
| mpeEntPhysicalExtEntityChanged NOTIFICATION-TYPE This trap signifies that an instance of this entity has been modified in the entPhysicalTable as a result of a change in any of the objects in that table. This trap is generated in addition to the entConfigChange notification defined in RFC2737. | 1.3.6.1.4.1.1795.2.24.12.24.2.25 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| mpeSysDevDslamAlarmStateGroup OBJECT-GROUP The collection of objects which are used to describe alarm states for equipments physically connected to a DSLAM device. | 1.3.6.1.4.1.1795.2.24.12.24.3.1.1 | current |
| mpeEntityExtNotificationGroup NOTIFICATION-GROUP The collection of objects which are used to notify that trap conditions are met. | 1.3.6.1.4.1.1795.2.24.12.24.3.1.2 | current |
| mpeSysDevDslamAlarmRelayGroup OBJECT-GROUP The collection of objects which are used for Alarm Relay objects. | 1.3.6.1.4.1.1795.2.24.12.24.3.1.3 | current |
| mpeEntPhysicalExtGroup OBJECT-GROUP The collection of objects which are used in extending the entPhysicalTable. | 1.3.6.1.4.1.1795.2.24.12.24.3.1.4 | current |
| mpeEntPhysicalExtNotificationObjectGroup OBJECT-GROUP A collection of objects that are included in the OBJECTS clause of notifications. | 1.3.6.1.4.1.1795.2.24.12.24.3.1.5 | current |
| mpeEntityExtPowerFailureNotificationGroup NOTIFICATION-GROUP The collection of objects which are used to notify that trap conditions are met. | 1.3.6.1.4.1.1795.2.24.12.24.3.1.6 | current |
| mpeSysDevDslamAlarmCompliances MODULE-COMPLIANCE The compliance statement for entities and their alarms states. | 1.3.6.1.4.1.1795.2.24.12.24.3.2.1 | current |
| mpeSysDevDslamAlarmDeprecatedCompliances MODULE-COMPLIANCE The compliance statement for deprecated groups | 1.3.6.1.4.1.1795.2.24.12.24.3.2.2 | deprecated |
| mpeDslamDeprecatedObjectsGroup OBJECT-GROUP The collection of objects that have been deprecated. | 1.3.6.1.4.1.1795.2.24.12.24.3.3.1 | deprecated |
| mpeDslamDeprecatedNotificationsGroup NOTIFICATION-GROUP The collection of traps/notifications that have been deprecated. | 1.3.6.1.4.1.1795.2.24.12.24.3.3.2 | deprecated |