PDN-HEALTHANDSTATUS-MIB
- Registered at
- 1.3.6.1.4.1.1795.2.24.2.4.1
- Namespace
- zhone
- Source file
PDN-HEALTHANDSTATUS-MIB- Digest
sha256:f88dee0fddff3dd07115f497b4fc79d079bef5a44c362c6e62f80f4696baa999
Imports
| From | Symbols |
|---|---|
| ENTITY-MIB | entPhysicalIndex |
| IF-MIB | ifIndex |
| PDN-HEADER-MIB | pdn-devStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ENTITY-MIB IANA-ENTITY-MIB IANAifType-MIB IF-MIB PDN-HEADER-MIB PDN-HEALTHANDSTATUS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC UUID-TC-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| devStatus OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.4.1 | |||
| devHealthAndStatus OBJECT-TYPE Health and Status of the device. Health & Status is represented as a concatenation of health and status message strings, where each message string is separated by a semi-colon. Refer to device-specific user documentation for a complete description of the Health and Status codes. | 1.3.6.1.4.1.1795.2.24.2.4.1.1 | DisplayString (SIZE(0..255)) | read-only | mandatory |
| devSelfTestResults OBJECT-TYPE Self-test results. Self-test (or power-up test) results summarizes the test results of each CCA, where each CCA test result is separated by a semi-colon. Refer to device-specific user documentation for a complete description of the self test codes and messages. | 1.3.6.1.4.1.1795.2.24.2.4.1.2 | DisplayString (SIZE(0..255)) | read-only | mandatory |
| devAbortStatus OBJECT-TYPE Abort Status. The devAbortStatus object is used to retrieve the latest abort status that is stored in the agent. The agent will need to save the latest abort information in non-volatile memory so that it will be available immediately after a fatal reset. How long the latest failure information is remembered after this point is an implementation issue. Refer to device-specific user documentation for a complete description of the abort codes and/or messages. | 1.3.6.1.4.1.1795.2.24.2.4.1.3 | DisplayString (SIZE(0..255)) | read-only | mandatory |
| devSNMPSetStatusTable OBJECT-TYPE A table containing SNMP Set command Statuses when an error occurs. It contains maximum of 5 entries. Oldest entry is pushed out when the table is full and a new entry is added. | 1.3.6.1.4.1.1795.2.24.2.4.1.4 | not-accessible | mandatory | |
| devSNMPSetStatusEntry OBJECT-TYPE The information regarding each SNMP Set command Status when en error occurs. Each entry is index by a request ID generated by the client and attached to the UDP when the Set command is sent. | 1.3.6.1.4.1.1795.2.24.2.4.1.4.1 | not-accessible | mandatory | |
| devSNMPSetReqId OBJECT-TYPE The Request ID which identifies the SNMP Set command in error. | 1.3.6.1.4.1.1795.2.24.2.4.1.4.1.1 | INTEGER | read-only | mandatory |
| devSNMPSetStatus OBJECT-TYPE Indicates the error message string associated with the Set command of this row in the table. | 1.3.6.1.4.1.1795.2.24.2.4.1.4.1.2 | DisplayString (SIZE(0..255)) | read-only | mandatory |
| devAuthenticationFailureIpAddress OBJECT-TYPE Authentication Failure Ip Address is used when a authenticationFailure trap is generated. The single varbind represents the ip address causing the error. If the ip address is not known, 0.0.0.0 is used. | 1.3.6.1.4.1.1795.2.24.2.4.1.5 | IpAddress | read-only | mandatory |
| devLastTrapString OBJECT-TYPE This object contains a textual description of the last trap that was processed by the device. The exact text in the description is device specific and should be contained user documentation outside of this MIB. It is recommended that the important information is contained within the first 100 characters. | 1.3.6.1.4.1.1795.2.24.2.4.1.6 | DisplayString (SIZE(0..255)) | read-only | mandatory |
| devFailureStatus OBJECT-TYPE Device Failure status. Conditions that cause failure are further described in the device documentation. | 1.3.6.1.4.1.1795.2.24.2.4.1.7 | DisplayString (SIZE(0..255)) | read-only | mandatory |
| devStatusTrapEnable OBJECT-TYPE This object provides ability to enable or disable individual enterprise traps. The object is bit map represented as a sum. The bit positions are: 1 deviceSelfTestFailure 2 deviceFailure | 1.3.6.1.4.1.1795.2.24.2.4.1.8 | INTEGER | read-write | mandatory |
| devSelfTestResultTable OBJECT-TYPE A table containing results of power on selftest for the whole unit. | 1.3.6.1.4.1.1795.2.24.2.4.1.9 | not-accessible | mandatory | |
| devSelfTestResultEntry OBJECT-TYPE The information regarding each SelfTest on each unit. | 1.3.6.1.4.1.1795.2.24.2.4.1.9.1 | not-accessible | mandatory | |
| devSelfTestResult OBJECT-TYPE Self-test results. Self-test (or power-up test) results summarizes the test results of each interface, where each CCA test result is separated by a semi-colon. Refer to device-specific user documentation for a complete description of the self test codes and messages. | 1.3.6.1.4.1.1795.2.24.2.4.1.9.1.1 | DisplayString | read-only | mandatory |
Notifications
| Name | OID | Status |
|---|---|---|
| devSelfTestFailure NOTIFICATION-TYPE This trap signifies that the sending protocol's device has failed self test. The variable binding for this trap would be the selfTest devSelfTestResults object of the Health and Status MIB. The exact format of this display string will be well-documented in the Operational Specifications of the device. | 1.3.6.1.4.1.1795.2.24.2.4.1.0.1 | |
| deviceFailure NOTIFICATION-TYPE This trap signifies that the sending protocol's device has failed and the failure was not a result of a device test. | 1.3.6.1.4.1.1795.2.24.2.4.1.0.2 |