PDN-ETHER-MIB
- Registered at
- 1.3.6.1.4.1.1795.2.24.2.18
- Last updated
- 1902-05-10 00:00
- Organization
- Paradyne Corporation MIB Working Group
- Revisions
- 1902-05-10 00:00, 1902-01-09 00:00, 2001-08-24 00:00, 2000-05-02 00:00
- Namespace
- zhone
- Source file
PDN-ETHER-MIB- Digest
sha256:0b14f28d4aa3ddb9a75d87a652d5e0fda95bb1d7a5c2ff1361d3dedb50cbe01b
Description
This MIB contains objects that are used to configure ethernet interfaces.
Contact
Paradyne Corporation 8545 126th Avenue North Largo, FL 33733 www.paradyne.com General Comments to: mibwg_team@paradyne.com Editors Wayne Jadoo Prakash Easwar Jesus A. Pinto Dragana Gough Clay Sikes
Imports
| From | Symbols |
|---|---|
| IF-MIB | ifIndex |
| MAU-MIB | ifJackIndex, ifMauEntry, ifMauIfIndex, ifMauIndex |
| PDN-HEADER-MIB | pdn-common |
| PDN-TC | ManagementType, ResetStates, SwitchState |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANA-MAU-MIB IANAifType-MIB IF-MIB MAU-MIB PDN-ETHER-MIB PDN-HEADER-MIB PDN-TC SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| pdnPortConfigMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.18.1 | |||
| pdnPortConfigEthernet OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.18.1.1 | |||
| pdnPortConfigEthernetTable OBJECT-TYPE A Table that contains information about the Ethernet port configuration | 1.3.6.1.4.1.1795.2.24.2.18.1.1.1 | not-accessible | current | |
| pdnPortConfigEthernetEntry OBJECT-TYPE An entry that contains configuration information about an ethernet Port | 1.3.6.1.4.1.1795.2.24.2.18.1.1.1.1 | not-accessible | current | |
| pdnPortConfigEthernetDuplexMode OBJECT-TYPE This object is used to enable or Disable Duplex Mode on an ethernet Port. This object can not be enabled if the auto-negotiate mode is enabled | 1.3.6.1.4.1.1795.2.24.2.18.1.1.1.1.1 | SwitchState | read-create | current |
| pdnPortConfigEthernetManageType OBJECT-TYPE This object is used to Enable or Disable Inband or Outband Management. | 1.3.6.1.4.1.1795.2.24.2.18.1.1.1.1.2 | ManagementType | read-create | current |
| pdnPortConfigEthernetResetState OBJECT-TYPE This object is used to reset the ethernet port. | 1.3.6.1.4.1.1795.2.24.2.18.1.1.1.1.3 | ResetStates | read-create | current |
| pdnPortConfigEthernetAutoNegotiate OBJECT-TYPE This object is used to enable or disable the auto-negotiate mode. Enabling this mode will disable selection of the speed and/or full duplex mode. | 1.3.6.1.4.1.1795.2.24.2.18.1.1.1.1.4 | SwitchState | read-create | current |
| pdnPortConfigEthernetSpeed OBJECT-TYPE This object corresponds to the speed of the ethernet port. This object can not be set if the auto-negotiate mode is enabled. | 1.3.6.1.4.1.1795.2.24.2.18.1.1.1.1.5 | INTEGER {tenBaseT(1), hundredBaseT(2)} | read-create | current |
| pdnPortConfigGroups OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.18.1.2 | |||
| pdnPortConfigMauExtMIBObject OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.18.1.3 | |||
| pdnPortConfigMauExtTable OBJECT-TYPE A Table that contains configuration information about the Ethernet port configuration and it extends standard MAU table from RFC2668. | 1.3.6.1.4.1.1795.2.24.2.18.1.3.1 | not-accessible | current | |
| pdnPortConfigMauExtEntry OBJECT-TYPE An entry that contains configuration information about an ethernet Port | 1.3.6.1.4.1.1795.2.24.2.18.1.3.1.1 | not-accessible | current | |
| pdnPortConfigXover OBJECT-TYPE This object is used to configure if crossover or straightthrough cable is used on ethernet interface if the interface is not set for autonegotiontion. | 1.3.6.1.4.1.1795.2.24.2.18.1.3.1.1.1 | INTEGER {mdi(1), mdix(2)} | read-create | current |
| pdnPortConfigIfJackMIBObject OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.18.1.4 | |||
| pdnIfJackTable OBJECT-TYPE This table conceptually extends the ifJackTable but not as an augmentation. See the note above. | 1.3.6.1.4.1.1795.2.24.2.18.1.4.1 | not-accessible | current | |
| pdnIfJackEntry OBJECT-TYPE An entry that contains configuration information about a jack. | 1.3.6.1.4.1.1795.2.24.2.18.1.4.1.1 | not-accessible | current | |
| pdnActiveJack OBJECT-TYPE This object allows the jack type to be configured or a priority to be set. This applies to Ethernet interfaces that may support more than one type of jack on an inter- face and only one jack is valid at a time. Consider two cases: 1. A product supports two types of jacks, a RJ45 copper- wire interface and a SFP fiber interface. The product is required to have the user set the active jack or allow it to be auto detected. The values for this object that allow the requirement to be satisfied and their interp- retation are as follows: a. fiber(1) - The fiber jack is active and the others, e.g. rj45, are ignored. b. rj45(2) - The rj45 jack is actie and the others, eg.fiber, are ignored. c. auto(3) - Either jack can be used and it is up to the implementation to determine which jack has presedence when both jacks are active. This determination must be clearly documented in the SNMP Operational Speci- fication. No default is specified for this MIB object so the default value for this object must be clearly documented in the SNMP Operational Specification. 2. A product supports two types of jacks, a RJ45 copper- wire interface and s SFP fiber interface. The product is required to have the user select which jack has priority when both jacks are active. The values for this object that allow the requirement to be satisfied and their interpretation are as follos: a. fiber(1) - The fiber jack has priority. b. rj45(2) - The rj45 jack has priority. c. auto(3) - Not used. | 1.3.6.1.4.1.1795.2.24.2.18.1.4.1.1.1 | INTEGER {fiber(1), rj45(2), auto(3)} | read-write | current |
| pdnPortConfigMIBTraps OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.18.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| pdnPortConfigEthernetGroup OBJECT-GROUP This collection of objects is used to set mode and rate on any ethernet interface. | 1.3.6.1.4.1.1795.2.24.2.18.1.2.1 | current |
| pdnPortConfigExtMauGroup OBJECT-GROUP This object is used to set xover mode on any ethernet interface. | 1.3.6.1.4.1.1795.2.24.2.18.1.2.2 | current |
| pdnPortConfigExtIfJackGroup OBJECT-GROUP This object is used to set active jack on any ethernet interface supporting more than one jack. | 1.3.6.1.4.1.1795.2.24.2.18.1.2.3 | current |