MIBs Depot

PDN-DSLAM-SYSTEM-MIB

Registered at
1.3.6.1.4.1.1795.2.24.2.24
Last updated
1902-06-05 00:00
Organization
Paradyne Corporation MIB Working Group
Revisions
1902-06-20 00:00, 1902-06-05 00:00, 1902-02-22 00:00
Namespace
zhone
Source file
PDN-DSLAM-SYSTEM-MIB
Digest
sha256:45d030da5569eb79f9a215a31d5bac90309bca9174343beed65acdc6491039ed

Description

The DSLAM MIB. This MIB is specific to portcards and DSLAM configuration/stats for MCC and the portcards. The objects defined in this mib are specific to some products and donot apply to all paradyne devices.

Contact

Paradyne Corporation 8545 126th Avenue North Largo, FL 33733 www.paradyne.com General Comments to: mibwg_team@paradyne.com Editors Prakash Easwar Jesus Pinto Dragana Gough

Imports

FromSymbols
ENTITY-MIBentPhysicalIndex
IF-MIBifIndex
PDN-HEADER-MIBpdn-common
PDN-TCIdslClockMode, SwitchState
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-MIBsysObjectID
SNMPv2-SMICounter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso
SNMPv2-TCDisplayString, RowStatus, TAddress, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ENTITY-MIB
IANA-ENTITY-MIB
IANAifType-MIB
IF-MIB
PDN-DSLAM-SYSTEM-MIB
PDN-HEADER-MIB
PDN-TC
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
UUID-TC-MIB

Objects

NameOIDSyntaxAccessStatus
sysDevDslamMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.24.1
sysDevStats
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.24.1.1
loginHistTable
OBJECT-TYPE
This table shows the most recent 10 logins and all active users currently accessing the device. It is indexed by userId and loginTime.
1.3.6.1.4.1.1795.2.24.2.24.1.1.1not-accessiblecurrent
loginHistTableEntry
OBJECT-TYPE
This object corresponds to an entry in the login history table.
1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1not-accessiblecurrent
loginUserId
OBJECT-TYPE
This object containes the user login id.
1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.1DisplayStringread-onlycurrent
loginTime
OBJECT-TYPE
This object containes the login time in seconds when the login session is established.
1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.2TimeTicksread-onlycurrent
loginAccessApp
OBJECT-TYPE
This object describes the access application used by the end user to access the device. This can be done through console, using telnet, modem, web, or using ftp.
1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.3INTEGER {console(1), telnet(2), ftp(3), web(4), modem(5)}read-onlycurrent
loginAccessHost
OBJECT-TYPE
This object containes the ip address of the network management station when the access application is telnet or ftp. In case of console, this object contains 0.0.0.0.
1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.4IpAddressread-onlycurrent
loginUserPriv
OBJECT-TYPE
This object containes the access privileges of the user.
1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.5INTEGER {administrator(1), operator(2)}read-onlycurrent
loginStatus
OBJECT-TYPE
This object indicates whether the user is still accessing the device.
1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.6INTEGER {active(1), inactive(2)}read-onlycurrent
loginFailureCountTable
OBJECT-TYPE
This table containes the statistics for login failures. It is indexed by access type i.e console, telnet or ftp.
1.3.6.1.4.1.1795.2.24.2.24.1.1.2not-accessiblecurrent
loginFailureCountTableEntry
OBJECT-TYPE
This object corresponds to an entry in the login failure count table.
1.3.6.1.4.1.1795.2.24.2.24.1.1.2.1not-accessiblecurrent
loginFailureAccessApp
OBJECT-TYPE
This object describes the access application used by the end user to access the device. This can be done through console, using telnet or using ftp.
1.3.6.1.4.1.1795.2.24.2.24.1.1.2.1.1INTEGER {console(1), telnet(2), ftp(3)}read-onlycurrent
loginFailureCount
OBJECT-TYPE
This object containes the number of unsuccesful logins for console, ftp or telnet.
1.3.6.1.4.1.1795.2.24.2.24.1.1.2.1.2Counter32read-onlycurrent
sysDevConfig
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.24.1.2
enablePowerSourceFailureAlarm
OBJECT-TYPE
This objects corresponds to enabling/disabling the power source failure alarm - for both A and B power sources This object is for the MCC only. The default value of this object should be 1.
1.3.6.1.4.1.1795.2.24.2.24.1.2.1INTEGER {disable(1), enable(2)}read-writecurrent
devIfTable
OBJECT-TYPE
This table is used to configure information for a particular interface
1.3.6.1.4.1.1795.2.24.2.24.1.2.2not-accessiblecurrent
devIfTableEntry
OBJECT-TYPE
This object corresponds to an entry in the DevifTable
1.3.6.1.4.1.1795.2.24.2.24.1.2.2.1not-accessiblecurrent
devPacketDiscardPolicy
OBJECT-TYPE
This object corresponds to the policy for packet discards during periods of congestion : mrrp - most recently received packets are discarded. lrrp - least recently received packets are discarded. The default value of this object should be 2
1.3.6.1.4.1.1795.2.24.2.24.1.2.2.1.1INTEGER {noOp(1), mrrp(2), lrrp(3)}read-createcurrent
devLinkIntegrity
OBJECT-TYPE
This object corresponds to the enabling or disabling of the ethernet link integrity : enable - enable link integrity disable - disable link integrity none - for interfaces that do not support link integrity The default value of this object should be 1
1.3.6.1.4.1.1795.2.24.2.24.1.2.2.1.2INTEGER {enable(1), disable(2), none(3)}read-createcurrent
communityTrapAddressInfoTable
OBJECT-TYPE
This table is used to set the trap destination address for a particular community.
1.3.6.1.4.1.1795.2.24.2.24.1.2.3not-accessiblecurrent
communityTrapAddressInfoTableEntry
OBJECT-TYPE
This object corresponds to an entry in the community trap address info table.
1.3.6.1.4.1.1795.2.24.2.24.1.2.3.1not-accessiblecurrent
trapCommunityName
OBJECT-TYPE
This object corresponds to the name of the SNMP Community.
1.3.6.1.4.1.1795.2.24.2.24.1.2.3.1.1DisplayString (SIZE(1..32))not-accessiblecurrent
trapDestAndPort
OBJECT-TYPE
The IP Address and Port of the destination to which a trap must be sent.
1.3.6.1.4.1.1795.2.24.2.24.1.2.3.1.2TAddressnot-accessiblecurrent
trapsEnable
OBJECT-TYPE
This object corresponds to turning traps on/off for a particular destination. enable (1) - traps will be sent to the specified destination. disable (2)- traps will not be sent to the specified destination. The default value of this object should be 2.
1.3.6.1.4.1.1795.2.24.2.24.1.2.3.1.3INTEGER {enable(1), disable(2)}read-createcurrent
trapRowStatus
OBJECT-TYPE
This object is used to add or delete a a row from the table.
1.3.6.1.4.1.1795.2.24.2.24.1.2.3.1.4RowStatusread-onlycurrent
entCommunityTable
OBJECT-TYPE
This table is used to set the various configuration parameters for a particular community.
1.3.6.1.4.1.1795.2.24.2.24.1.2.4not-accessiblecurrent
entCommunityTableEntry
OBJECT-TYPE
This object corresponds to an entry in the community table.
1.3.6.1.4.1.1795.2.24.2.24.1.2.4.1not-accessiblecurrent
entCommunityName
OBJECT-TYPE
This object corresponds to the name of the SNMP Community
1.3.6.1.4.1.1795.2.24.2.24.1.2.4.1.1DisplayString (SIZE(1..32))not-accessiblecurrent
entCommunityType
OBJECT-TYPE
The type of the community readOnly - this community is only allowed to do get's readWrite - this community is allowed to do get's and set's The default value of this object should be 1
1.3.6.1.4.1.1795.2.24.2.24.1.2.4.1.2INTEGER {readOnly(1), readWrite(2)}read-createcurrent
entCommunityRowStatus
OBJECT-TYPE
This object is used to add or delete a a row from the table.
1.3.6.1.4.1.1795.2.24.2.24.1.2.4.1.3RowStatusread-createcurrent
sysDevUserAccountTable
OBJECT-TYPE
This table contains the user accounts.
1.3.6.1.4.1.1795.2.24.2.24.1.2.5not-accessiblecurrent
sysDevUserAccountEntry
OBJECT-TYPE
An entry containing user account information.
1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1not-accessiblecurrent
sysDevUserAccountUserId
OBJECT-TYPE
This object corresponds to the login ID of the user account.
1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1.1DisplayString (SIZE(6..15))not-accessiblecurrent
sysDevUserAccountPrivilege
OBJECT-TYPE
This object corresponds to the access privilege of the user account. 1 = Operator, 2 = Administrator, 3 = maintenance, 4 = provisioning, 5 = manufacturing.
1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1.2INTEGER {operator(1), administrator(2), maintenance(3), provisioning(4), manufacturing(5)}read-createcurrent
sysDevUserAccountUserPassword
OBJECT-TYPE
This object corresponds to the password of the user account.
1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1.3DisplayString (SIZE(6..15))read-createcurrent
sysDevUserAccountAccessPartition
OBJECT-TYPE
This object corresponds to the access partition of the user account. The default value of this object is 'all'
1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1.4DisplayString (SIZE(0..50))read-createcurrent
sysDevUserAccountRowStatus
OBJECT-TYPE
This object corresponds to create or delete a row in sysDevUserAccountTable.
1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1.5RowStatusread-createcurrent
sysDevIDSLConfigTable
OBJECT-TYPE
A table that contains configuration information about IDSL Card.
1.3.6.1.4.1.1795.2.24.2.24.1.2.6not-accessiblecurrent
sysDevIDSLConfigEntry
OBJECT-TYPE
A list of information for IDSL device Configuration.
1.3.6.1.4.1.1795.2.24.2.24.1.2.6.1not-accessiblecurrent
sysDevIDSLConfigPrimaryNetClockMode
OBJECT-TYPE
This object indicates the network clock mode set for the primary network clock. IDSL portcards with a port configured as an NT will be set to portCardDriveClockOnboard(4), both driving the backplane and using the clock for the other Local Timing transceivers on the card. Port cards with only LT ports configured will receive a clock from the backplane using portCardSinkClock(2). portCardDriveClock(3) will drive the backplane alone. The default value of this object is triState(1).
1.3.6.1.4.1.1795.2.24.2.24.1.2.6.1.1IdslClockModeread-createcurrent
sysDevIDSLConfigSecondaryNetClockMode
OBJECT-TYPE
This object indicates the network clock mode set for the secondary network clock. IDSL portcards with a port configured as an NT will be set to portCardDriveClockOnboard(4), both driving the backplane and using the clock for the other Local Timing transceivers on the card. Port cards with only LT ports configured will receive a clock from the backplane using portCardSinkClock(2). portCardDriveClock(3) will drive the backplane alone. The default value of this object is triState(1).
1.3.6.1.4.1.1795.2.24.2.24.1.2.6.1.2IdslClockModeread-createcurrent
sysDevDslamSyslog
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.24.1.2.7
sysDevSyslogFtpServerXferStatsEnable
OBJECT-TYPE
This object allows the network manager to enable and disable syslog messages for FTP server file transfer statistics
1.3.6.1.4.1.1795.2.24.2.24.1.2.7.1SwitchStateread-writecurrent
sysDevSyslogTftpServerXferStatsEnable
OBJECT-TYPE
This object allows the network manager to enable and disable syslog messages for TFTP server file transfer statistics
1.3.6.1.4.1.1795.2.24.2.24.1.2.7.2SwitchStateread-writecurrent
sysDevConfigUserAccountTable
OBJECT-TYPE
This table contains the user accounts.
1.3.6.1.4.1.1795.2.24.2.24.1.2.8not-accessiblecurrent
sysDevConfigUserAccountEntry
OBJECT-TYPE
An entry containing user account information.
1.3.6.1.4.1.1795.2.24.2.24.1.2.8.1not-accessiblecurrent
sysDevConfigUserAccountIndex
OBJECT-TYPE
The value of this object is an index of the account config table. This object is used by sysDevConfigUserAccountTable to identify the row in the table. When creating new row of this table the value of this object may be obtained by retreiving the value of sysDevConfigUserAccountIndexNext.
1.3.6.1.4.1.1795.2.24.2.24.1.2.8.1.1Integer32not-accessiblecurrent
sysDevConfigUserAccountUserId
OBJECT-TYPE
This object corresponds to the login ID of the user account.
1.3.6.1.4.1.1795.2.24.2.24.1.2.8.1.2DisplayString (SIZE(1..15))read-createcurrent
sysDevConfigUserAccountPrivilegedPassword
OBJECT-TYPE
This object corresponds to the access privilege password of the user account. If user is configured with this password in addition to a UserPassword than the user is Administrator. In a case that user is Operator and does not supply this password upon user configuration this value should be null string
1.3.6.1.4.1.1795.2.24.2.24.1.2.8.1.3DisplayString (SIZE(0..15))read-createcurrent
sysDevConfigUserAccountUserPassword
OBJECT-TYPE
This object corresponds to the password of the user account.
1.3.6.1.4.1.1795.2.24.2.24.1.2.8.1.4DisplayString (SIZE(0..15))read-createcurrent
sysDevConfigUserAccountRowStatus
OBJECT-TYPE
This object corresponds to create or delete a row in sysDevConfigUserAccountTable.
1.3.6.1.4.1.1795.2.24.2.24.1.2.8.1.5RowStatusread-createcurrent
sysDevConfigUserAccountIndexNext
OBJECT-TYPE
This object contains an appropriate value to be used for sysDevConfigUserAccountTable. The value of 0 indicates that no unassigned entries are available. To obtain sysDevConfigUserAccountIndex value for the new entry the manager issues a management protocol retrieval operation to obtain a current value of this object. After each retrieval, the agent should modify the value to the next unassigned index.
1.3.6.1.4.1.1795.2.24.2.24.1.2.9Integer32read-onlycurrent
sysDevDslamMIBTraps
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.24.2

Notifications

NameOIDStatus
cCN
NOTIFICATION-TYPE
This trap signifies a Configuration change or software upgrade in the xDSL card. This trap is of 'warning' class
1.3.6.1.4.1.1795.2.24.2.24.2.7current
authenticationFailureTrap
NOTIFICATION-TYPE
This trap signifies an authentication failure. Authentication failures can be telnet based or terminal based. This trap is in addition to the SNMP based authentication failure trap, which is a generic trap.
1.3.6.1.4.1.1795.2.24.2.24.2.8current
fanModuleFailure
NOTIFICATION-TYPE
This trap indicates the indicates the failure of the fan module on the device.
1.3.6.1.4.1.1795.2.24.2.24.2.9current
powerSourceAFailure
NOTIFICATION-TYPE
This trap indicates that power source A has failed. This is sent only by the MCC card. This trap is of 'minor' class.
1.3.6.1.4.1.1795.2.24.2.24.2.10current
slotPollFailure
NOTIFICATION-TYPE
This trap indicates a slot poll failure. This is sent only by the MCC card. this trap is of 'major' class.
1.3.6.1.4.1.1795.2.24.2.24.2.11current
ethernetJabber
NOTIFICATION-TYPE
This trap indicates that a jabber condition has been detected on the ethernet interface. This trap is of 'major' class.
1.3.6.1.4.1.1795.2.24.2.24.2.12current
ethernetJumbos
NOTIFICATION-TYPE
This trap indicates ethernet jumbos. this trap is of 'minor' class
1.3.6.1.4.1.1795.2.24.2.24.2.13current
ethernetRunts
NOTIFICATION-TYPE
This trap indicates ethernet runts. this trap is of 'minor'
1.3.6.1.4.1.1795.2.24.2.24.2.14current
powerSourceBFailure
NOTIFICATION-TYPE
This trap indicates that power source B has failed. This is sent only by the MCC card. This trap is of 'minor' class.
1.3.6.1.4.1.1795.2.24.2.24.2.17current
nonIpConservativeCardDetected
NOTIFICATION-TYPE
This trap indicates that a non ip conservative DSL card exist in the chassis at the slot 'slotNumber'.This is sent only by the MCC card. This trap is of warning class.
1.3.6.1.4.1.1795.2.24.2.24.2.18current
nonSupportedMCC
NOTIFICATION-TYPE
AN has detected MCC firmware release too low to support this device
1.3.6.1.4.1.1795.2.24.2.24.2.20current
nonSupportedChassis
NOTIFICATION-TYPE
AN in slot xx has been installed in a chassis that cannot support one or more of its features.
1.3.6.1.4.1.1795.2.24.2.24.2.21current
fanEntityModuleFailure
NOTIFICATION-TYPE
This trap indicates the indicates the failure of the fan module on the device.
1.3.6.1.4.1.1795.2.24.2.24.2.22current
fanModuleOperational
NOTIFICATION-TYPE
This trap indicates the indicates the fan module on the device is operational.
1.3.6.1.4.1.1795.2.24.2.24.2.109current
powerSourceAOperational
NOTIFICATION-TYPE
This trap indicates that the power source A is operational. This is sent only by the MCC card. This trap is of 'minor' class. This trap compliments powerSourceAFailure trap.
1.3.6.1.4.1.1795.2.24.2.24.2.110current
newCardDetected
NOTIFICATION-TYPE
This trap indicates that a new card was detected in a slot. This is sent only by the MCC card. this trap is of 'warning' class.
1.3.6.1.4.1.1795.2.24.2.24.2.111current
ethernetJabberClear
NOTIFICATION-TYPE
This trap indicates that the jabber condition that was detected no longer exists. This trap is of 'major' class.
1.3.6.1.4.1.1795.2.24.2.24.2.112current
powerSourceBOperational
NOTIFICATION-TYPE
This trap indicates that the power source B is operational. This is sent only by the MCC card. This trap is of 'minor' class. This trap compliments powerSourceBFailure trap.
1.3.6.1.4.1.1795.2.24.2.24.2.117current
fanEntityModuleOperational
NOTIFICATION-TYPE
This trap indicates the indicates the fan module on the device is operational.
1.3.6.1.4.1.1795.2.24.2.24.2.122current