PDN-DS1CONFIG-MIB
- Registered at
- 1.3.6.1.4.1.1795.2.24.2.6.5
- Namespace
- zhone
- Source file
PDN-DS1CONFIG-MIB- Digest
sha256:d72c7332130035bcebbe3517f8594c1f2a24d8b1988aa53e449764867ccc3a08
Imports
| From | Symbols |
|---|---|
| PDN-HEADER-MIB | pdn-interfaces |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Gauge32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
PDN-DS1CONFIG-MIB PDN-HEADER-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Under this module's arcs
Where the registration tree carries on below this module.
| Arc | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.6.5.5 | pdnDs1Ext | PDN-DS1EXT-MIB |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ent_ds1 OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.6.5 | |||
| devDS1Test OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.6.5.1 | |||
| devDS1TestTable OBJECT-TYPE The Paradyne DS1 Interface Test Table. | 1.3.6.1.4.1.1795.2.24.2.6.5.1.1 | not-accessible | mandatory | |
| devDS1TestEntry OBJECT-TYPE An entry in the Paradyne DS1 Interface Test Table. | 1.3.6.1.4.1.1795.2.24.2.6.5.1.1.1 | not-accessible | mandatory | |
| devDS1TestIfIndex OBJECT-TYPE The index value which uniquely identifies the interface for which this entry contains information on interface tests. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex from the Interfaces table of MIB II (RFC 1213). | 1.3.6.1.4.1.1795.2.24.2.6.5.1.1.1.1 | INTEGER | read-only | mandatory |
| devDS1TestType OBJECT-TYPE The index value which uniquely identifies the test for which this entry contains information. | 1.3.6.1.4.1.1795.2.24.2.6.5.1.1.1.2 | INTEGER {llbup(1), llbdn(2), llb(3), plb(4), rlb(5), sendQRSS(6), sendZeros(7), sendOnes(8), send1in8(9), send3in24(10), send63(11), send511(12), send2047(13), send2E15(14), send2E20(15), sendUserDefined(16), monQRSS(17), monZeros(18), monOnes(19), mon1in8(20), mon3in24(21), mon63(22), mon11(23), mon2047(24), mon2E15(25), mon2E20(26), monUserDefined(27), send2E7(28), mon2E7(29), send2E11(30), mon2E11(31)} | read-only | mandatory |
| devDS1TestControl OBJECT-TYPE A control variable used to start and stop operator- initiated interface tests. Writing idle(1) to the test table entry terminates the specified test for the interface associated with the entry. Writing running(2) activates the specified test for the interface, if allowed (i.e., the test must be allowed for the interface and in combination with any other tests currently executing for the interface). The rules for executing tests for the product are specified in the product's Operator's Guide. This variable is read to determine the current status of the test for the interface. A value of running(2) indicates the test is currently in progress on the interface. A value of idle(1) indicates that the test is currently not active on the interface. | 1.3.6.1.4.1.1795.2.24.2.6.5.1.1.1.3 | INTEGER {idle(1), running(2)} | read-write | mandatory |
| devDS1TestArgument OBJECT-TYPE Any argument required by the test being executed. | 1.3.6.1.4.1.1795.2.24.2.6.5.1.1.1.4 | DisplayString (SIZE(0..255)) | read-write | mandatory |
| devDS1MonResultTable OBJECT-TYPE The Paradyne Device Monitor Test Pattern Result Table. | 1.3.6.1.4.1.1795.2.24.2.6.5.1.2 | not-accessible | mandatory | |
| devDS1MonResultEntry OBJECT-TYPE An entry in the Paradyne Device Monitor Test Pattern Result Table. | 1.3.6.1.4.1.1795.2.24.2.6.5.1.2.1 | not-accessible | mandatory | |
| devDS1MonResultIfIndex OBJECT-TYPE The index value which uniquely identifies the interface for which this entry contains information on the result of the monitor test pattern request. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex from the Interfaces table of MIB II (RFC 1213). | 1.3.6.1.4.1.1795.2.24.2.6.5.1.2.1.1 | INTEGER | read-only | mandatory |
| devDS1MonResultTestType OBJECT-TYPE The index value which uniquely identifies the test for which this entry contains information. | 1.3.6.1.4.1.1795.2.24.2.6.5.1.2.1.2 | INTEGER {monQRSS(17), monZeros(18), monOnes(19), mon1in8(20), mon3in24(21), mon63(22), mon11(23), mon2047(24), mon2E15(25), mon2E20(26), monUserDefined(27), mon2E7(29), mon2E11(31)} | read-only | mandatory |
| devDS1MonResultCode OBJECT-TYPE This object contains a code for more specific information on the test pattern monitoring result. A value of none(1) indicates that no further information is available. inSyncNoBitErrors(2) notes that the monitor pattern test has synchronized on the pattern and has not detected any bit errors. inSyncWithBitErrors indicates that the monitor pattern test has synchronized on the pattern and has detected bit errors. A monitor pattern test that has not synchronized on the request pattern returns a value of notInSync(4). | 1.3.6.1.4.1.1795.2.24.2.6.5.1.2.1.3 | INTEGER {none(1), inSyncNoBitErrors(2), inSyncWithBitErrors(3), notInSync(4)} | read-only | mandatory |
| devDS1MonResultErrorCount OBJECT-TYPE The number of bit errors detected in the received monitoring test pattern. The error count is updated once every second. The error count does not increment during periods when the pattern is not synchronized, or once synchronization is lost. The maximum value of this object is 99,999. Writing any value to this object will reset it to zero. | 1.3.6.1.4.1.1795.2.24.2.6.5.1.2.1.4 | Gauge | read-write | mandatory |
| devDS1SendControlTable OBJECT-TYPE The Paradyne Device Send Test Pattern Control Table. | 1.3.6.1.4.1.1795.2.24.2.6.5.1.3 | not-accessible | mandatory | |
| devDS1SendControlEntry OBJECT-TYPE An entry in the Paradyne Device Send Test Pattern Control Table. | 1.3.6.1.4.1.1795.2.24.2.6.5.1.3.1 | not-accessible | mandatory | |
| devDS1SendControlIfIndex OBJECT-TYPE The index value which uniquely identifies the interface for which this entry contains information on the result of the monitor test pattern request. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex from the Interfaces table of MIB II (RFC 1213). | 1.3.6.1.4.1.1795.2.24.2.6.5.1.3.1.1 | INTEGER | read-only | mandatory |
| devDS1SendControlInjectErr OBJECT-TYPE Setting this object to inject(2) will inject one error in the data pattern being sent. If no pattern is being sent, the agent will return BAD VALUE. Reading this value will always return noOp(1). | 1.3.6.1.4.1.1795.2.24.2.6.5.1.3.1.2 | INTEGER {noOp(1), inject(2)} | read-write | mandatory |
| devDS1SendControlErrorCount OBJECT-TYPE The number of bit errors injected into the test pattern being sent. The maximum value of this object is 99,999. | 1.3.6.1.4.1.1795.2.24.2.6.5.1.3.1.3 | Gauge | read-only | mandatory |