PDN-DS1EXT-MIB
- Registered at
- 1.3.6.1.4.1.1795.2.24.2.6.5.5
- Last updated
- 2002-04-05 00:00
- Organization
- Paradyne Corp MIB Working Group
- Namespace
- zhone
- Source file
PDN-DS1EXT-MIB- Digest
sha256:36e2a387baedb82c335c8f7ad312e8886aca3204e7343a15d9a69d091a86b7a6
Description
The Paradyne enterprise DS1/G.703 extension MIB. This MIB provides additional DS1 and G.703 (E1) configuration objects not provided by rfc2495.
Contact
Paradyne Networks, Inc. 8545, 126th Ave. N., Largo, FL 33779 www.paradyne.com General Comments to: mibwg_team@paradyne.com Editors: Vic Sperry
Imports
| From | Symbols |
|---|---|
| IF-MIB | ifIndex |
| PDN-HEADER-MIB | ent-ds1 |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB IF-MIB PDN-DS1EXT-MIB PDN-HEADER-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| pdnDs1ExtObjects OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.6.5.5.1 | |||
| pdnDs1ExtConfTable OBJECT-TYPE The Paradyne DS1/G.703 extension configuration table. This table is used for configuring extensions to DS1 and G.703 interfaces. | 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1 | not-accessible | current | |
| pdnDs1ExtConfEntry OBJECT-TYPE An entry in the Paradyne DS1/G.703 extension configuration table. Note: The objects used depend on the type of interface. For DS1: use pdnDs1ExtConfLineLengthType and one of (pdnDs1ExtConfLineLength or pdnDs1ExtConfLineBuildOut) For G.703: use pdnDs1ExtConfLineLengthType and pdnDs1ExtConfConnector | 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1 | not-accessible | current | |
| pdnDs1ExtConfLineLengthType OBJECT-TYPE This entry specifies the type of loop length for the interface. short-haul is intended for intra-building use. long-haul is intended for inter-building use. | 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.1 | INTEGER {shortHaul(1), longHaul(2)} | read-write | current |
| pdnDs1ExtConfLineLength OBJECT-TYPE This entry specifies the loop length, in feet, for a short-haul DS1 line. This object only applies to DS1 interfaces. Note: This object shares a mutually exclusive relationship with the pdnDs1ExtConfLineBuildOut object i.e. only one of the two can be used for configuration at one time, based on the pdnDs1ExtConfLineLengthType object. | 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.2 | INTEGER {feet000To133(1), feet134To266(2), feet267To399(3), feet400To533(4), feet534To655(5)} | read-write | current |
| pdnDs1ExtConfLineBuildOut OBJECT-TYPE This entry specifies the line build out, in decibels, for a long-haul DS1 line. dB0Pnt0 = 0.0 dB dB7Pnt5 = -7.5 dB dB15Pnt0 = -15.0 dB dB22Pnt5 = -22.5 dB This object only applies to DS1 interfaces. Note: This object shares a mutually exclusive relationship with the pdnDs1ExtConfLineLength object i.e. only one of the two can be used for configuration at one time, based on the pdnDs1ExtConfLineLengthType object. | 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.3 | INTEGER {dB0Pnt0(1), dB7Pnt5(2), dB15Pnt0(3), dB22Pnt5(4)} | read-write | current |
| pdnDs1ExtConfConnector OBJECT-TYPE This entry specifies the type of connector to be used. This object only applies to G.703 interfaces. bnc: 75-Ohm connector supporting only short-haul. rj48: 120-Ohm connector supporting both short-haul and long-haul. | 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.4 | INTEGER {bnc(1), rj48(2)} | read-write | current |
| pdnDs1ExtConformance OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.6.5.5.2 | |||
| pdnDs1ExtGroups OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.6.5.5.2.1 | |||
| pdnDs1ExtCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.6.5.5.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| pdnDs1ExtT1ConfigGroup OBJECT-GROUP A collection of configuration objects required for configuring a T1 interface. | 1.3.6.1.4.1.1795.2.24.2.6.5.5.2.1.1 | current |
| pdnDs1ExtE1ConfigGroup OBJECT-GROUP A collection of configuration objects required for configuring a G.703 (E1) interface. | 1.3.6.1.4.1.1795.2.24.2.6.5.5.2.1.2 | current |
| pdnDs1ExtCompliance MODULE-COMPLIANCE Compliance statement for using this MIB for configuring DS1 interfaces. | 1.3.6.1.4.1.1795.2.24.2.6.5.5.2.2.1 | current |
| pdnDs1ExtG703Compliance MODULE-COMPLIANCE Compliance statement for using this MIB for configuring G.703 interfaces. | 1.3.6.1.4.1.1795.2.24.2.6.5.5.2.2.2 | current |