MIBs Depot

NQA-MIB

Registered at
1.3.6.1.4.1.2011.5.25.111
Last updated
2006-01-09 17:39
Organization
Huawei Technologies Co., Ltd.
Namespace
huawei
Source file
NQA-MIB
Digest
sha256:86947916b0767d4220a4b47140c1a318b25c73b2dd105b383389cc5c463b9e9d

Description

HUAWEI service quality detect funcion.

Contact

R&D BeiJing, Huawei Technologies co.,Ltd. Huawei Bld.,NO.3 Xinxi Rd., Shang-Di Information Industry Base, Hai-Dian District Beijing P.R. China Zip:100085 Http://www.huawei.com E-mail:support@huawei.com

Imports

FromSymbols
HUAWEI-ETHOAM-MIBHWDot1agCfmEgressActionFieldValue, HWDot1agCfmIngressActionFieldValue, HWDot1agCfmRelayActionFieldValue
HUAWEI-MIBhwDatacomm
IEEE802171-CFM-MIBDot1agCfmMaintAssocName, Dot1agCfmMaintDomainName, Dot1agCfmMepIdOrZero
IF-MIBInterfaceIndexOrZero
INET-ADDRESS-MIBInetAddress, InetAddressType, InetPortNumber
P-BRIDGE-MIBEnabledStatus
Q-BRIDGE-MIBVlanIdOrNone
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-GROUP, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, mib-2
SNMPv2-TCDateAndTime, DisplayString, MacAddress, RowStatus, StorageType, TEXTUAL-CONVENTION, TimeInterval, TimeStamp, TruthValue

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
HCNUM-TC
HUAWEI-ETHOAM-MIB
HUAWEI-MIB
IANA-ADDRESS-FAMILY-NUMBERS-MIB
IANAifType-MIB
IEEE802171-CFM-MIB
IF-MIB
INET-ADDRESS-MIB
LLDP-MIB
NQA-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TOKEN-RING-RMON-MIB
TRANSPORT-ADDRESS-MIB

Textual conventions

NameOIDSyntaxAccessStatus
EnableValue
TEXTUAL-CONVENTION
Represents a boolean value.
current
HWLldpPortId
TEXTUAL-CONVENTION
This TC describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. If the associated LldpPortIdSubtype object has a value of 'interfaceAlias(1)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863). If the particular ifAlias object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'portComponent(2)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component. If the associated LldpPortIdSubtype object has a value of 'macAddress(3)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order) associated with the port (IEEE Std 802-2001). If the associated LldpPortIdSubtype object has a value of 'networkAddress(4)', then this string identifies a network address associated with the port. The first octet contains the IANA AddressFamilyNumbers enumeration value for the specific address type, and octets 2 through N contain the networkAddress address value in network byte order. If the associated LldpPortIdSubtype object has a value of 'interfaceName(5)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863). If the particular ifName object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'agentCircuitId(6)', then this string identifies a agent-local identifier of the circuit (defined in RFC 3046). If the associated LldpPortIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned port ID.
current
HWLldpPortIdSubtype
TEXTUAL-CONVENTION
LLDP interface ID sub type
current
NqaDistanceNodeType
TEXTUAL-CONVENTION
Selection of destination addresses when MACPing is performed.
current
NqaOperation
TEXTUAL-CONVENTION
Paras for specified test.
current
NqaType
TEXTUAL-CONVENTION
Select test type
current

Objects

NameOIDSyntaxAccessStatus
nqaBase
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.111.1
nqaVersion
OBJECT-TYPE
The NQA version (for example, 1.1). It can be used for version management.
1.3.6.1.4.1.2011.5.25.111.1.1DisplayStringread-onlycurrent
nqaEnable
OBJECT-TYPE
Indicates the switch of enabling NQA client. (The value range: enable:1; disable:2.The default value is enable(1))
1.3.6.1.4.1.2011.5.25.111.1.2EnableValueread-writecurrent
nqaReset
OBJECT-TYPE
Clears all the enabled test configurations. (The value range: enable:1; disable:2. The default value is disable(2))
1.3.6.1.4.1.2011.5.25.111.1.3EnableValueread-writecurrent
nqaTimeOfLastSetError
OBJECT-TYPE
The time of the last configuration error. (0 indicates that the configuration does not fail).
1.3.6.1.4.1.2011.5.25.111.1.4DateAndTimeread-onlycurrent
nqaLastSetError
OBJECT-TYPE
The time of the last configuration error. (0 indicates that the configuration does not fail).
1.3.6.1.4.1.2011.5.25.111.1.5DisplayStringread-onlycurrent
nqaNumOfCurrentCtrlEntry
OBJECT-TYPE
The total number of current configuration tests.
1.3.6.1.4.1.2011.5.25.111.1.6Integer32read-writecurrent
nqaMaxConcurrentRequests
OBJECT-TYPE
The maximum number of concurrent active requests that are allowed within an agent implementation.
1.3.6.1.4.1.2011.5.25.111.1.7Unsigned32read-writecurrent
nqaMaxNumOfRequests
OBJECT-TYPE
The maximum number of requests that are allowed within an agent implementation.
1.3.6.1.4.1.2011.5.25.111.1.8Unsigned32read-onlycurrent
nqaJitterVersion
OBJECT-TYPE
Selects the version of jitter test. (The value range: old version:1, new version:2. The default value is old version(1))
1.3.6.1.4.1.2011.5.25.111.1.9Integer32read-writecurrent
nqaSupportTestType
OBJECT-TYPE
Test type that the current device supports. Data structure of the type is in the format of bits. Each bit represents a test type. The mappings between bits and tests are as follows: icmp(0), tcp(1), udp(2), http(3), ftp(4), jitter(5), snmp(6), trace(7), lspPing(8), lspTrace(9), dns(10), dhcp(11), dlsw(12), pwe3Ping(13), pwe3Trace(14), mPing(15), mTrace(16), macPing(17), macTunnelPing(18), lspJitter(19), icmpJitter(20), pathJitter(21), pathMtu(22), pppoe(23), vplsmPing(24), vplsmacPing(25), vplsmacTrace(26), vplsMTrace(27), gmacping(28), gmactrace(29), mactrace(30), vplspwping(31), vplspwtrace(32) The value #0x00 indicates don't suppourt all testtypes.
1.3.6.1.4.1.2011.5.25.111.1.10Bits {icmp(0), tcp(1), udp(2), http(3), ftp(4), jitter(5), snmp(6), trace(7), lspPing(8), lspTrace(9), dns(10), dhcp(11), dlsw(12), pwe3Ping(13), pwe3Trace(14), mPing(15), mTrace(16), macPing(17), macTunnelPing(18), lspJitter(19), icmpJitter(20), pathJitter(21), pathMtu(22), pppoe(23), vplsmPing(24), vplsmacPing(25), vplsmacTrace(26), vplsMTrace(27), gmacping(28), gmactrace(29), mactrace(30), vplspwping(31), vplspwtrace(32)}read-onlycurrent
nqaSupportServerType
OBJECT-TYPE
Test type that the current device supports. Data structure of the type is in the format of bits. Each bit represents a test type. tcpServer(0), udpServer(1), icmpServer(2) The value #0x00 indicates don't suppourt all servertypes.
1.3.6.1.4.1.2011.5.25.111.1.11Bits {tcpServer(0), udpServer(1), icmpServer(2)}read-onlycurrent
nqaCtrl
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.111.2
nqaAdminCtrlTable
OBJECT-TYPE
A table of NQA monitoring definitions.
1.3.6.1.4.1.2011.5.25.111.2.1not-accessiblecurrent
nqaAdminCtrlEntry
OBJECT-TYPE
Defines an entry in the nqaAdminCtrlTable.
1.3.6.1.4.1.2011.5.25.111.2.1.1not-accessiblecurrent
nqaAdminCtrlOwnerIndex
OBJECT-TYPE
To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model for tables in which multiple users may need to independently create or modify entries, the initial index is used as an 'ownerindex'. When used in conjunction with such a security policy all entries in the table belonging to a particular user (or group) will have the same value for this initial index. For a given user's entries in a particular table, the object identifiers for the information in these entries will have the same subidentifiers (except for the 'column' subidentifier) up to the end of the encoded owner index.
1.3.6.1.4.1.2011.5.25.111.2.1.1.1SnmpAdminString (SIZE(0..32))not-accessiblecurrent
nqaAdminCtrlTestName
OBJECT-TYPE
The name of a test. This is locally unique, within the scope of an nqaAdminCtrlOwnerIndex.
1.3.6.1.4.1.2011.5.25.111.2.1.1.2SnmpAdminString (SIZE(0..32))not-accessiblecurrent
nqaAdminCtrlTag
OBJECT-TYPE
A string which is the description of the test instance.
1.3.6.1.4.1.2011.5.25.111.2.1.1.3DisplayStringread-createcurrent
nqaAdminCtrlType
OBJECT-TYPE
The type of the test instance.
1.3.6.1.4.1.2011.5.25.111.2.1.1.4NqaTyperead-createcurrent
nqaAdminCtrlFrequency
OBJECT-TYPE
Specifies the interval when the test instance repeats.
1.3.6.1.4.1.2011.5.25.111.2.1.1.5Integer32read-createcurrent
nqaAdminCtrlTimeOut
OBJECT-TYPE
Specifies the duration to wait for the completion of test instance. The default value of DHCP-type and FTP-type test instance is 15s, The default value of PPPoE-type test instance is 30s, and that of other types is 3s.
1.3.6.1.4.1.2011.5.25.111.2.1.1.6Integer32 (1..60)read-createcurrent
nqaAdminCtrlThreshold1
OBJECT-TYPE
Represents the threshold of RTD (Round Trip Delay). If the RTT violates the threshold, the corresponding counter will increase. It applies to any type of test instance.
1.3.6.1.4.1.2011.5.25.111.2.1.1.7Integer32read-createcurrent
nqaAdminCtrlThreshold2
OBJECT-TYPE
Represents the threshold of OWD (One Way Delay) from source to destination. If the OWD violates the threshold, the corresponding counter will increase. It applies only to jitter-type test instances.
1.3.6.1.4.1.2011.5.25.111.2.1.1.8Integer32read-createcurrent
nqaAdminCtrlThreshold3
OBJECT-TYPE
Represents the threshold of OWD (One Way Delay) from destination to source. If the OWD violates the threshold, the corresponding counter will increase. It applies only to jitter-type test instances.
1.3.6.1.4.1.2011.5.25.111.2.1.1.9Integer32read-createcurrent
nqaAdminCtrlStatus
OBJECT-TYPE
To set the value of this object can create or delete the specified test instance and the records belonging to it. Before deleting a test instance, the custom must make sure that the status of the test instance is inactive through nqaScheduleOperStatus. The value can be set to 'CreateAndGo (4)', 'Destroy (6)' and 'Active (1)'.
1.3.6.1.4.1.2011.5.25.111.2.1.1.10RowStatusread-createcurrent
nqaAdminParaTable
OBJECT-TYPE
Set parameter for a test.
1.3.6.1.4.1.2011.5.25.111.2.2not-accessiblecurrent
nqaAdminParaEntry
OBJECT-TYPE
set parameter in the nqaAdminParaTable.
1.3.6.1.4.1.2011.5.25.111.2.2.1not-accessiblecurrent
nqaAdminParaTargetAddressType
OBJECT-TYPE
Represents the address type of destination.
1.3.6.1.4.1.2011.5.25.111.2.2.1.1InetAddressTyperead-writecurrent
nqaAdminParaTargetAddress
OBJECT-TYPE
Represents the address of destination.
1.3.6.1.4.1.2011.5.25.111.2.2.1.2InetAddressread-writecurrent
nqaAdminParaTargetPort
OBJECT-TYPE
Represents the port number of destination.
1.3.6.1.4.1.2011.5.25.111.2.2.1.3InetPortNumberread-writecurrent
nqaAdminParaSourceAddressType
OBJECT-TYPE
Represents the address type of source.
1.3.6.1.4.1.2011.5.25.111.2.2.1.4InetAddressTyperead-writecurrent
nqaAdminParaSourceAddress
OBJECT-TYPE
Represents the address of source.
1.3.6.1.4.1.2011.5.25.111.2.2.1.5InetAddressread-writecurrent
nqaAdminParaSourcePort
OBJECT-TYPE
Represents the port number of source.
1.3.6.1.4.1.2011.5.25.111.2.2.1.6InetPortNumberread-writecurrent
nqaAdminParaMaxTtl
OBJECT-TYPE
Specifies the maximum value of TTL. The value cannot be set to 0 unless the test-type is pwe3ping, the lsp-version is rfc4379, and the ttl-copymode is pipe.
1.3.6.1.4.1.2011.5.25.111.2.2.1.7Unsigned32 (0..255)read-writecurrent
nqaAdminParaInitialTtl
OBJECT-TYPE
Specifies the initial value of TTL.
1.3.6.1.4.1.2011.5.25.111.2.2.1.8Unsigned32 (1..255)read-writecurrent
nqaAdminParaStorageType
OBJECT-TYPE
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
1.3.6.1.4.1.2011.5.25.111.2.2.1.9StorageTyperead-writecurrent
nqaAdminParaMaxFailures
OBJECT-TYPE
The value of this object indicates the maximum number of consecutive timeouts allowed before terminating a remote traceroute request. A value of 255 (maximum hop count/possible TTL value) indicates that the function of terminating a remote traceroute request when a specific number of successive timeouts are detected is disabled.
1.3.6.1.4.1.2011.5.25.111.2.2.1.10Unsigned32 (1..255)read-writecurrent
nqaAdminParaDontFragment
OBJECT-TYPE
This object enables setting of Don't Fragment (DF) flag in the IP header for a probe. Use of this object enables performing a manual PATH MTU test.
1.3.6.1.4.1.2011.5.25.111.2.2.1.11TruthValueread-writecurrent
nqaAdminParaDataSize
OBJECT-TYPE
The size of data field in packet.
1.3.6.1.4.1.2011.5.25.111.2.2.1.12Unsigned32read-writecurrent
nqaAdminParaDataFill
OBJECT-TYPE
Represents the characters used for filling the data field. This object is used together with the corresponding object, nqaAdminParaDataSize.
1.3.6.1.4.1.2011.5.25.111.2.2.1.13OCTET STRINGread-writecurrent
nqaAdminParaIfIndex
OBJECT-TYPE
Specified the source interface or tunnel, from which probes of the test instance are sent. The object applies to DHCP, jitter, icmpjitter, ICMP, lspping or lsptrace type test instance. The value zero implies that the object is disabled.
1.3.6.1.4.1.2011.5.25.111.2.2.1.14InterfaceIndexOrZeroread-writecurrent
nqaAdminParaByPassRouteTable
OBJECT-TYPE
The purpose of this object is to optionally enable bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send directly to a host on an attached network. If the host is not on a directly-attached network, an error is returned. This option can be used to perform the ping/traceroute operation to a local host through an interface that has no route defined (e.g., after the interface was dropped by routed).
1.3.6.1.4.1.2011.5.25.111.2.2.1.15TruthValueread-writecurrent
nqaAdminParaMiscOptions
OBJECT-TYPE
Enables an application to specify implementation dependent options.
1.3.6.1.4.1.2011.5.25.111.2.2.1.16SnmpAdminStringread-writecurrent
nqaAdminParaProbeCount
OBJECT-TYPE
Specifies the number of packets sent by the test instance, or times of probe repeated, in which may send several packets. The second case applies to jitter-type test instances.
1.3.6.1.4.1.2011.5.25.111.2.2.1.17Unsigned32 (1..15)read-writecurrent
nqaAdminParaTrapGeneration
OBJECT-TYPE
Switch of notification. Determine whether and how to send notifications for the test instance: - probeFailure(0) - Generate a PathChange notification when the current path varies from a previously determined path. - testFailure(1) - Generate a TestFailed notification when the full path to a target can't be determined. - testCompletion(2) - Generate a TestCompleted notification when the path to a target has been determined. - overRtdThreshold(3) - Generate a Overthreshold of RTD notification when the statistic results exceed threshold. - overOwdThresholdSd(4) - Generate a Overthreshold of OWD-SD notification when the statistic results exceed threshold. - overOwdThresholdDs(5) - Generate a Overthreshold of OWD-DS notification when the statistic results exceed threshold. The value #0x00 indicates disable all notifications.
1.3.6.1.4.1.2011.5.25.111.2.2.1.18Bits {probeFailure(0), testFailure(1), testCompletion(2), overRtdThreshold(3), overOwdThresholdSd(4), overOwdThresholdDs(5)}read-writecurrent
nqaAdminParaTrapProbeFailureFilter
OBJECT-TYPE
Specifies the condition when to trigger an nqaProbeFailed notification. When the number of consecutive failed probes violates the threshold indicated by nqaAdminParaTrapProbeFailureFilter, a notification will be created. This object is used together with nqaAdminParaTrapGeneration.
1.3.6.1.4.1.2011.5.25.111.2.2.1.19Unsigned32 (1..15)read-writecurrent
nqaAdminParaTrapTestFailureFilter
OBJECT-TYPE
Specifies the condition when to trigger an nqaTestFailed notification. When the number of failed tests violates the threshold indicated by nqaAdminParaTrapTestFailureFilter, a notification will be created. There are usually several probes in each test. This object is used together with nqaAdminParaTrapGeneration.
1.3.6.1.4.1.2011.5.25.111.2.2.1.20Unsigned32 (1..15)read-writecurrent
nqaAdminParaDSField
OBJECT-TYPE
Specifies the Differentiated Services (DS) field in the IP packet. The DS field is defined as the Type Of Service (TOS) octet in IPv4 header or as the Traffic Class octet in IPv6 header.
1.3.6.1.4.1.2011.5.25.111.2.2.1.21Integer32 (0..255)read-writecurrent
nqaAdminParaDnsServerAddressType
OBJECT-TYPE
Specifies the address type of DNS server.
1.3.6.1.4.1.2011.5.25.111.2.2.1.22InetAddressTyperead-writecurrent
nqaAdminParaDnsServerAddress
OBJECT-TYPE
Specifies the address of DNS server.
1.3.6.1.4.1.2011.5.25.111.2.2.1.23InetAddressread-writecurrent
nqaAdminParaOperation
OBJECT-TYPE
Specifies the operation of FTP or HTTP type test instance. The operations of FTP-type test instance include get and put. The operations of HTTP-type test instance include get and post.
1.3.6.1.4.1.2011.5.25.111.2.2.1.24NqaOperationread-writecurrent
nqaAdminParaHttpVersion
OBJECT-TYPE
Specifies the version of HTTP.
1.3.6.1.4.1.2011.5.25.111.2.2.1.25DisplayStringread-writecurrent
nqaAdminParaHttpOperationString
OBJECT-TYPE
A string that specifies the HTTP operation which will be sent to the HTTP server.
1.3.6.1.4.1.2011.5.25.111.2.2.1.26DisplayStringread-writecurrent
nqaAdminParaTestFailurePercent
OBJECT-TYPE
Specifies the scale over which the test will be regarded as failed.
1.3.6.1.4.1.2011.5.25.111.2.2.1.27Unsigned32 (0..100)read-writecurrent
nqaAdminParaFtpUserName
OBJECT-TYPE
Specifies the user name of the FTP server.
1.3.6.1.4.1.2011.5.25.111.2.2.1.28DisplayStringread-writecurrent
nqaAdminParaFtpPassword
OBJECT-TYPE
Specifies the password of the user of the FTP server.
1.3.6.1.4.1.2011.5.25.111.2.2.1.29DisplayStringread-writecurrent
nqaAdminParaFtpFilePath
OBJECT-TYPE
Specifies the full name of the file which will be transmitted by the FTP-type test instance.
1.3.6.1.4.1.2011.5.25.111.2.2.1.30DisplayStringread-writecurrent
nqaAdminParaFtpFileSize
OBJECT-TYPE
Specifies the size that the file will be transmitted by the FTP-type test instance. It may be part of the file.
1.3.6.1.4.1.2011.5.25.111.2.2.1.31Integer32 (0..10000)read-writecurrent
nqaAdminParaInterval
OBJECT-TYPE
Specifies the interval between two consecutive probe packets.
1.3.6.1.4.1.2011.5.25.111.2.2.1.32Integer32 (0..60000)read-writecurrent
nqaAdminParaNumPackets
OBJECT-TYPE
Specifies the number of packet sent in each probe. This object is used together with nqaAdminParaProbeCount, and only apples to jitter-type test instance.
1.3.6.1.4.1.2011.5.25.111.2.2.1.33Integer32read-writecurrent
nqaAdminParaVrfName
OBJECT-TYPE
Specifies the VRF name.
1.3.6.1.4.1.2011.5.25.111.2.2.1.34DisplayStringread-writecurrent
nqaAdminParaLspAddressType
OBJECT-TYPE
Specifies the address type of LSP. The object applies to lspping, lsptrace and lspjitter type test instance.
1.3.6.1.4.1.2011.5.25.111.2.2.1.35INTEGER {ipv4(1), te(3), ring(255)}read-writecurrent
nqaAdminParaLspAddressMask
OBJECT-TYPE
Specifies the address mask of LSP. The object apples to lspping, lsptrace and lspjitter type test instance.
1.3.6.1.4.1.2011.5.25.111.2.2.1.36Integer32read-writecurrent
nqaAdminParaLspIpAddress
OBJECT-TYPE
IP Address filled in the ip header, must be a 127/8 address.
1.3.6.1.4.1.2011.5.25.111.2.2.1.37InetAddressread-writecurrent
nqaAdminParaLspPWE3VcId
OBJECT-TYPE
The local Pseudo wire ID in PWE3 Ping test
1.3.6.1.4.1.2011.5.25.111.2.2.1.38Unsigned32read-writecurrent
nqaAdminParaLspPWE3Type
OBJECT-TYPE
The encapsulation type of Pseudo wire ID in the PWE3 Ping test
1.3.6.1.4.1.2011.5.25.111.2.2.1.39INTEGER {fr(1), atmAal5Sdu(2), atm-cell-transport(3), vlan(4), ethernet(5), hdlc(6), ppp(7), atm-nto1-vcc(9), atm-nto1-vpc(10), ip-layer2(11), atm-1to1-vcc(12), atm-1to1-vpc(13), satop-e1(17), satop-t1(18), satop-e3(19), cesopsn-basic(21), ipInterworking(64)}read-writecurrent
nqaAdminParaLspPWE3Option
OBJECT-TYPE
The label type of PWE3 Ping and PWE3 Tracert test.
1.3.6.1.4.1.2011.5.25.111.2.2.1.40INTEGER {labelAlert(1), controlWord(2), normal(3)}read-writecurrent
nqaAdminParaLspPWE3RemoteVcId
OBJECT-TYPE
The remote Pseudo wire ID in PWE Ping test.
1.3.6.1.4.1.2011.5.25.111.2.2.1.41Unsigned32read-writecurrent
nqaAdminParaLspPWE3RemoteAddress
OBJECT-TYPE
The remote IP address in PWE3 Ping test.
1.3.6.1.4.1.2011.5.25.111.2.2.1.42InetAddressread-writecurrent
nqaAdminParaLspExp
OBJECT-TYPE
The 3bit EXP field of the MPLS echo packet label.
1.3.6.1.4.1.2011.5.25.111.2.2.1.43Unsigned32 (0..7)read-writecurrent
nqaAdminParaLspReplyMode
OBJECT-TYPE
ReplyMode Value Meaning ----- ------- 1 Do not reply 2 Reply via an IPv4/IPv6 UDP packet 3 Reply via an IPv4/IPv6 UDP packet with Router Alert 4 Reply via application level control channel 5 Reply via a VPLS IPv4 UDP packet
1.3.6.1.4.1.2011.5.25.111.2.2.1.44INTEGER {noReply(1), udp(2), udpRouterAlert(3), levelControlChannel(4), udpviaVPLS(5)}read-writecurrent
nqaAdminParaResultRowMax
OBJECT-TYPE
Specifies the maximum number of result records.
1.3.6.1.4.1.2011.5.25.111.2.2.1.45Integer32read-writecurrent
nqaAdminParaHistoryRowMax
OBJECT-TYPE
Specifies the maximum number of history records.
1.3.6.1.4.1.2011.5.25.111.2.2.1.46Integer32read-writecurrent
nqaAdminParaCreateHopsEntries
OBJECT-TYPE
When set to 'enable (1)', the result of each hop will be kept in nqaResultsTable. The object applies to trace, pwe3trace, lsptrace, mtrace type test instance.
1.3.6.1.4.1.2011.5.25.111.2.2.1.47EnableValueread-writecurrent
nqaAdminParaLspVCType
OBJECT-TYPE
The type of protocol which establishes PW in the pwe3tracert test
1.3.6.1.4.1.2011.5.25.111.2.2.1.48INTEGER {ldp(1), bgp(2), bgpad(3)}read-writecurrent
nqaAdminParaMTraceLastHopAddress
OBJECT-TYPE
The last hop router's IP address in Mtrace test.
1.3.6.1.4.1.2011.5.25.111.2.2.1.49InetAddressread-writecurrent
nqaAdminParaMTraceSourceAddress
OBJECT-TYPE
The IP address of the multicast source for the path being traced in Mtrace test.
1.3.6.1.4.1.2011.5.25.111.2.2.1.50InetAddressread-writecurrent
nqaAdminParaMTraceGroupAddress
OBJECT-TYPE
The group address to be traced in Mtrace test, or zero if no group-specific information is desired.
1.3.6.1.4.1.2011.5.25.111.2.2.1.51InetAddressread-writecurrent
nqaAdminParaMTraceMaxTtl
OBJECT-TYPE
The maximum number of hops that the requester wants to trace in Mtrace test.
1.3.6.1.4.1.2011.5.25.111.2.2.1.52Unsigned32 (1..255)read-writecurrent
nqaAdminParaMTraceSendMode
OBJECT-TYPE
The sending mode of the Query pamessage in Mtrace test.
1.3.6.1.4.1.2011.5.25.111.2.2.1.53INTEGER {multicastTree(1), allRouter(2), destination(3), lastHop(4)}read-writecurrent
nqaAdminParaMTraceResponseTtl
OBJECT-TYPE
The TTL at which to multicast the response in Mtrace test, if the response address is a multicast address.
1.3.6.1.4.1.2011.5.25.111.2.2.1.54Unsigned32 (1..255)read-writecurrent
nqaAdminParaMTraceResponseAddressType
OBJECT-TYPE
Mtrace response address type
1.3.6.1.4.1.2011.5.25.111.2.2.1.55InetAddressTyperead-writecurrent
nqaAdminParaMTraceResponseAddress
OBJECT-TYPE
This field specifies where the completed traceroute response packet gets sent in Mtrace test. It can be a unicast address or a multicast address
1.3.6.1.4.1.2011.5.25.111.2.2.1.56InetAddressread-writecurrent
nqaAdminParaDistanceNodeType
OBJECT-TYPE
The destination of MAC ping(mac address or rmepid).
1.3.6.1.4.1.2011.5.25.111.2.2.1.57NqaDistanceNodeTyperead-writecurrent
nqaAdminParaMacAddress
OBJECT-TYPE
Mac address of the destination of MAC PING.
1.3.6.1.4.1.2011.5.25.111.2.2.1.58MacAddressread-writecurrent
nqaAdminParaRMepID
OBJECT-TYPE
Rmepid of the destination of MAC PING.
1.3.6.1.4.1.2011.5.25.111.2.2.1.59Dot1agCfmMepIdOrZeroread-writecurrent
nqaAdminParaMDName
OBJECT-TYPE
Indicate the MD name in which the MAC Ping operated.
1.3.6.1.4.1.2011.5.25.111.2.2.1.60OCTET STRING (SIZE(0..43))read-writecurrent
nqaAdminParaMAName
OBJECT-TYPE
Indicate the MA name in which the MAC Ping operated.
1.3.6.1.4.1.2011.5.25.111.2.2.1.61OCTET STRING (SIZE(0..45))read-writecurrent
nqaAdminParaMacTunnelName
OBJECT-TYPE
Indicate the MAC Tunnel name in which the MAC Ping operated.
1.3.6.1.4.1.2011.5.25.111.2.2.1.62OCTET STRINGread-writecurrent
nqaAdminParaPathMtuStep
OBJECT-TYPE
Specify the step of the path MTU test.If the last response was received successful,the next packet's length will add the step.
1.3.6.1.4.1.2011.5.25.111.2.2.1.63Integer32 (1..512)read-writecurrent
nqaAdminParaPathMtuDiscoveryPathMtuMax
OBJECT-TYPE
Specify the max value of the discovery field in the path MTU test.
1.3.6.1.4.1.2011.5.25.111.2.2.1.64Integer32 (48..9198)read-writecurrent
nqaAdminParaIcmpJitterMode
OBJECT-TYPE
Select the type of ICMP packets to be sent in ICMP jitter and path jitter test.The value can be icmpTimestamp(1) or icmpEcho(2).
1.3.6.1.4.1.2011.5.25.111.2.2.1.65INTEGER {icmpTimestamp(1), icmpEcho(2)}read-writecurrent
nqaAdminParaCodecType
OBJECT-TYPE
To indicate the codec type to be used with jitter probe. This is applicable only for the jitter probe.
1.3.6.1.4.1.2011.5.25.111.2.2.1.66INTEGER {notDefined(1), g711Alaw(2), g711Ulaw(3), g729A(4)}read-writecurrent
nqaAdminParaIcpifAdvFactor
OBJECT-TYPE
The advantage factor depends on the type of access and how the service is to be used. This object will be used while calculating the ICPIF (Calculated Planning Impairment Factor) values. Suggestion values: |---------------------------------------------------|-------| | Service |factor | |---------------------------------------------------|-------| | conventional wire-line | 0 | |---------------------------------------------------|-------| | mobility within Building | 5 | |---------------------------------------------------|-------| | mobility within geographical area | 10 | |---------------------------------------------------|-------| | access to hard-to-reach location | 20 | |---------------------------------------------------|-------|
1.3.6.1.4.1.2011.5.25.111.2.2.1.67Integer32read-writecurrent
nqaAdminParaFtpMode
OBJECT-TYPE
To indicate the mode to be used with ftp probe. This is applicable only for the ftp probe.
1.3.6.1.4.1.2011.5.25.111.2.2.1.68INTEGER {active(1), passive(2)}read-writecurrent
nqaAdminParaHardwareBased
OBJECT-TYPE
Indicates that the hardware is enabled to send packets. (The value range: enable:1;disable:2.The default value is disable(2))
1.3.6.1.4.1.2011.5.25.111.2.2.1.69EnabledStatusread-writecurrent
nqaAdminParaPppoeUserName
OBJECT-TYPE
Specifies the username of PPPoE dial-up. For jitter,icmp,traceroute, tcp,udp,ftp,dns,http probes, this parameter indicates that the probe uses PPPoE encapsulation. This parameter accepts the characters in sight only.
1.3.6.1.4.1.2011.5.25.111.2.2.1.70OCTET STRING (SIZE(0..32))read-writecurrent
nqaAdminParaPppoePassword
OBJECT-TYPE
Specifies the password of PPPoE dial-up. This is applicable only for the PPPoE probe. This parameter accepts the characters in sight only.
1.3.6.1.4.1.2011.5.25.111.2.2.1.71OCTET STRING (SIZE(0..16))read-writecurrent
nqaAdminParaPppoeVlanIf
OBJECT-TYPE
Specifies the vlanif of PPPoE dial-up. For jitter, icmp, traceroute, tcp, udp, ftp, dns, http probes, this parameter indicates that the probe uses PPPoE encapsulation.
1.3.6.1.4.1.2011.5.25.111.2.2.1.72Integer32 (0..4093)read-writecurrent
nqaAdminParaPppoeAuthenticationMode
OBJECT-TYPE
Specifies the authentication mode of PPPoE dial-up. This is applicable only for the PPPoE probe.
1.3.6.1.4.1.2011.5.25.111.2.2.1.73INTEGER {chap(1), pap(2)}read-writecurrent
nqaAdminParaPppoeRedialUpTimes
OBJECT-TYPE
Specifies the redialup times of PPPoE dial-up. This is applicable only for the PPPoE probe.
1.3.6.1.4.1.2011.5.25.111.2.2.1.74Integer32 (0..10)read-writecurrent
nqaAdminParaPppoeInterval
OBJECT-TYPE
Specifies the redialup interval of PPPoE dial-up. This is applicable only for the PPPoE probe.
1.3.6.1.4.1.2011.5.25.111.2.2.1.75Integer32 (1..600)read-writecurrent
nqaAdminParaVsiName
OBJECT-TYPE
Specify the name of the VSI(Virtual Switch Instance)
1.3.6.1.4.1.2011.5.25.111.2.2.1.76OCTET STRING (SIZE(0..31))read-writecurrent
nqaAdminParaVlanId
OBJECT-TYPE
Specify the Vlan ID
1.3.6.1.4.1.2011.5.25.111.2.2.1.77VlanIdOrNoneread-writecurrent
nqaAdminParaLspTunnelType
OBJECT-TYPE
To indicate ping/trace which lsp tunnel.
1.3.6.1.4.1.2011.5.25.111.2.2.1.78INTEGER {main(0), hotstandby(1)}read-writecurrent
nqaAdminParaLspNextHopAddress
OBJECT-TYPE
Represents the address of nexthop.
1.3.6.1.4.1.2011.5.25.111.2.2.1.79InetAddressread-writecurrent
nqaAdminParaLspVersion
OBJECT-TYPE
Specify lsp version of protocol. Draft-ietf-mpls-lsp-ping-06 protocol, RFC4379 protocol or ptn mode.
1.3.6.1.4.1.2011.5.25.111.2.2.1.80INTEGER {draft6(1), rfc4379(2), ptnmode(3)}read-writecurrent
nqaAdminParaRemoteAddressType
OBJECT-TYPE
Represents the address type of remote.
1.3.6.1.4.1.2011.5.25.111.2.2.1.81InetAddressTyperead-writecurrent
nqaAdminParaRemoteAddress
OBJECT-TYPE
Represents the address of remote.
1.3.6.1.4.1.2011.5.25.111.2.2.1.82InetAddressread-writecurrent
nqaAdminParaTimeUnit
OBJECT-TYPE
The unit of the timestamp, ms or us.
1.3.6.1.4.1.2011.5.25.111.2.2.1.83INTEGER {us(1), ms(2)}read-writecurrent
nqaScheduleTable
OBJECT-TYPE
Schedule test .
1.3.6.1.4.1.2011.5.25.111.2.3not-accessiblecurrent
nqaScheduleEntry
OBJECT-TYPE
Set start-up in the nqaAdminParaTable.
1.3.6.1.4.1.2011.5.25.111.2.3.1not-accessiblecurrent
nqaScheduleStartType
OBJECT-TYPE
Specifies the start type of the test instance. The object is used together with nqaScheduleStartTime.
1.3.6.1.4.1.2011.5.25.111.2.3.1.1INTEGER {default(0), startNow(1), startAt(2), startAfter(3)}read-writecurrent
nqaScheduleStartTime
OBJECT-TYPE
Specifies the start time of the test instance. Setting the value to 0 indicates to start the test instance immediately. After configuring this object, the status of the test instance is active, and the parameters of the test instance can't be changed.
1.3.6.1.4.1.2011.5.25.111.2.3.1.2Unsigned32read-writecurrent
nqaScheduleEndType
OBJECT-TYPE
Specifies the end type of the test instance. The object is used together with nqaScheduleEndTime.
1.3.6.1.4.1.2011.5.25.111.2.3.1.3INTEGER {default(0), endAt(1), endAfter(2), endLifetime(3)}read-writecurrent
nqaScheduleEndTime
OBJECT-TYPE
Specifies the end time of the test instance.
1.3.6.1.4.1.2011.5.25.111.2.3.1.4Unsigned32read-writecurrent
nqaScheduleAgeTime
OBJECT-TYPE
Specifies the aging time of the test instance, the time how long the test instance will be reserved in NQA, after the test instance is inactive. Setting the value to 0 indicates reserving the test instance eternally.
1.3.6.1.4.1.2011.5.25.111.2.3.1.5Integer32read-writecurrent
nqaScheduleElapsedTime
OBJECT-TYPE
The elapsed time (the period of time after task dispatch).
1.3.6.1.4.1.2011.5.25.111.2.3.1.6TimeIntervalread-onlycurrent
nqaScheduleNumOfInitiations
OBJECT-TYPE
Specifies the times that the test instance has been initialed. This object is used as the index of the result table, HTTP statistics table, jitter statistics table, FTP statistics table and history table.
1.3.6.1.4.1.2011.5.25.111.2.3.1.7Integer32read-onlycurrent
nqaScheduleLastFinishIndex
OBJECT-TYPE
Specifies the latest finished test of the test instance, which is used as the index of the result table.
1.3.6.1.4.1.2011.5.25.111.2.3.1.8Integer32read-onlycurrent
nqaScheduleOperStatus
OBJECT-TYPE
Specifies the status of dispatching operation: - reset: Clear all the records of the test instance. - stop: Stop the test instance, if it's running. - restart: Stop the test instance, if it's running, and restart the test instance immediately. - active: The test instance is running; the parameters of the test instances can't be changed. - inactive: The test instance doesn't be scheduled; the parameters of the test instances can be changed.
1.3.6.1.4.1.2011.5.25.111.2.3.1.9INTEGER {reset(1), stop(2), restart(3), active(4), inactive(5)}read-writecurrent
nqaScheduleLastCollectIndex
OBJECT-TYPE
Specifies the index of the latest collection statistics result record in the collection result table.
1.3.6.1.4.1.2011.5.25.111.2.3.1.10Integer32read-onlycurrent
nqaGroupTable
OBJECT-TYPE
Set group for a test.
1.3.6.1.4.1.2011.5.25.111.2.4not-accessiblecurrent
nqaGroupEntry
OBJECT-TYPE
Set parameters in the nqaGroupTable.
1.3.6.1.4.1.2011.5.25.111.2.4.1not-accessiblecurrent
nqaGroupStatusType
OBJECT-TYPE
Specifies the group status of the test instance. The value can be normal (1), leader (2) or member (3).
1.3.6.1.4.1.2011.5.25.111.2.4.1.1INTEGER {normal(1), leader(2), member(3)}read-writecurrent
nqaGroupPeriod
OBJECT-TYPE
Specifies the interval during which all members in the specified group will be executed.
1.3.6.1.4.1.2011.5.25.111.2.4.1.2Integer32read-writecurrent
nqaGroupLeaderOwnerIndex
OBJECT-TYPE
Specifies the owner index of the group leader, if the test instance is a member of the group.
1.3.6.1.4.1.2011.5.25.111.2.4.1.3SnmpAdminStringread-writecurrent
nqaGroupLeaderTestName
OBJECT-TYPE
Specifies the test name of the group leader, if the test instance is a member of the group.
1.3.6.1.4.1.2011.5.25.111.2.4.1.4SnmpAdminStringread-writecurrent
nqaGroupMemberNum
OBJECT-TYPE
Specifies the number of member in the group.
1.3.6.1.4.1.2011.5.25.111.2.4.1.5Integer32read-onlycurrent
nqaGroupMemberFree
OBJECT-TYPE
Free all members in the group.
1.3.6.1.4.1.2011.5.25.111.2.4.1.6EnableValueread-writecurrent
nqaAdminParaExtTable
OBJECT-TYPE
Set parameter for a test.
1.3.6.1.4.1.2011.5.25.111.2.5not-accessiblecurrent
nqaAdminParaExtEntry
OBJECT-TYPE
Set parameter in the nqaAdminParaExtTable.
1.3.6.1.4.1.2011.5.25.111.2.5.1not-accessiblecurrent
nqaAdminExtPara1
OBJECT-TYPE
This object indicates the description of the nqaAdminExtPara2 object. The value is automatically assigned by the system after the type of the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.1OCTET STRINGread-onlycurrent
nqaAdminExtPara2
OBJECT-TYPE
This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara1 object after the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.2Integer32read-writecurrent
nqaAdminExtPara3
OBJECT-TYPE
This object indicates the description of the nqaAdminExtPara4 object. The value is automatically assigned by the system after the type of the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.3OCTET STRINGread-onlycurrent
nqaAdminExtPara4
OBJECT-TYPE
This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara3 object after the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.4Integer32read-writecurrent
nqaAdminExtPara5
OBJECT-TYPE
This object indicates the description of the nqaAdminExtPara6 object. The value is automatically assigned by the system after the type of the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.5OCTET STRINGread-onlycurrent
nqaAdminExtPara6
OBJECT-TYPE
This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara5 object after the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.6Integer32read-writecurrent
nqaAdminExtPara7
OBJECT-TYPE
This object indicates the description of the nqaAdminExtPara8 object. The value is automatically assigned by the system after the type of the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.7OCTET STRINGread-onlycurrent
nqaAdminExtPara8
OBJECT-TYPE
This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara7 object after the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.8Integer32read-writecurrent
nqaAdminExtPara9
OBJECT-TYPE
This object indicates the description of the nqaAdminExtPara10 object. The value is automatically assigned by the system after the type of the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.9OCTET STRINGread-onlycurrent
nqaAdminExtPara10
OBJECT-TYPE
This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara9 object after the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.10Integer32read-writecurrent
nqaAdminExtPara11
OBJECT-TYPE
This object indicates the description of the nqaAdminExtPara12 object. The value is automatically assigned by the system after the type of the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.11OCTET STRINGread-onlycurrent
nqaAdminExtPara12
OBJECT-TYPE
This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara11 object after the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.12Integer32read-writecurrent
nqaAdminExtPara13
OBJECT-TYPE
This object indicates the description of the nqaAdminExtPara14 object. The value is automatically assigned by the system after the type of the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.13OCTET STRINGread-onlycurrent
nqaAdminExtPara14
OBJECT-TYPE
This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara13 object after the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.14Integer32read-writecurrent
nqaAdminExtPara15
OBJECT-TYPE
This object indicates the description of the nqaAdminExtPara16 object. The value is automatically assigned by the system after the type of the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.15OCTET STRINGread-onlycurrent
nqaAdminExtPara16
OBJECT-TYPE
This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara15 object after the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.16Integer32read-writecurrent
nqaAdminExtPara17
OBJECT-TYPE
This object indicates the description of the nqaAdminExtPara18 object. The value is automatically assigned by the system after the type of the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.17OCTET STRINGread-onlycurrent
nqaAdminExtPara18
OBJECT-TYPE
This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara17 object after the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.18Integer32read-writecurrent
nqaAdminExtPara19
OBJECT-TYPE
This object indicates the description of the nqaAdminExtPara20 object. The value is automatically assigned by the system after the type of the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.19OCTET STRINGread-onlycurrent
nqaAdminExtPara20
OBJECT-TYPE
This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara19 object after the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.20Integer32read-writecurrent
nqaAdminExtPara21
OBJECT-TYPE
This object indicates the description of the nqaAdminExtPara22 object. The value is automatically assigned by the system after the type of the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.21OCTET STRINGread-onlycurrent
nqaAdminExtPara22
OBJECT-TYPE
This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara21 object after the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.22Integer32read-writecurrent
nqaAdminExtPara23
OBJECT-TYPE
This object indicates the description of the nqaAdminExtPara24 object. The value is automatically assigned by the system after the type of the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.23OCTET STRINGread-onlycurrent
nqaAdminExtPara24
OBJECT-TYPE
This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara23 object after the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.24Integer32read-writecurrent
nqaAdminExtPara25
OBJECT-TYPE
This object indicates the description of the nqaAdminExtPara26 object. The value is automatically assigned by the system after the type of the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.25OCTET STRINGread-onlycurrent
nqaAdminExtPara26
OBJECT-TYPE
This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara25 object after the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.26Integer32read-writecurrent
nqaAdminExtPara27
OBJECT-TYPE
This object indicates the description of the nqaAdminExtPara28 object. The value is automatically assigned by the system after the type of the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.27OCTET STRINGread-onlycurrent
nqaAdminExtPara28
OBJECT-TYPE
This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara27 object after the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.28Integer32read-writecurrent
nqaAdminExtPara29
OBJECT-TYPE
This object indicates the description of the nqaAdminExtPara30 object. The value is automatically assigned by the system after the type of the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.29OCTET STRINGread-onlycurrent
nqaAdminExtPara30
OBJECT-TYPE
This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara29 object after the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.30Integer32read-writecurrent
nqaAdminExtPara31
OBJECT-TYPE
This object indicates the description of the nqaAdminExtPara32 object. The value is automatically assigned by the system after the type of the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.31OCTET STRINGread-onlycurrent
nqaAdminExtPara32
OBJECT-TYPE
This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara31 object after the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.32OCTET STRINGread-writecurrent
nqaAdminExtPara33
OBJECT-TYPE
This object indicates the description of the nqaAdminExtPara34 object. The value is automatically assigned by the system after the type of the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.33OCTET STRINGread-onlycurrent
nqaAdminExtPara34
OBJECT-TYPE
This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara33 object after the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.34OCTET STRINGread-writecurrent
nqaAdminExtPara35
OBJECT-TYPE
This object indicates the description of the nqaAdminExtPara36 object. The value is automatically assigned by the system after the type of the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.35OCTET STRINGread-onlycurrent
nqaAdminExtPara36
OBJECT-TYPE
This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara35 object after the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.36OCTET STRINGread-writecurrent
nqaAdminExtPara37
OBJECT-TYPE
This object indicates the description of the nqaAdminExtPara38 object. The value is automatically assigned by the system after the type of the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.37OCTET STRINGread-onlycurrent
nqaAdminExtPara38
OBJECT-TYPE
This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara37 object after the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.38OCTET STRINGread-writecurrent
nqaAdminExtPara39
OBJECT-TYPE
This object indicates the description of the nqaAdminExtPara40 object. The value is automatically assigned by the system after the type of the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.39OCTET STRINGread-onlycurrent
nqaAdminExtPara40
OBJECT-TYPE
This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara39 object after the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.40OCTET STRINGread-writecurrent
nqaAdminExtPara41
OBJECT-TYPE
This object indicates the description of the nqaAdminExtPara42 object. The value is automatically assigned by the system after the type of the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.41OCTET STRINGread-onlycurrent
nqaAdminExtPara42
OBJECT-TYPE
This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara41 object after the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.42OCTET STRINGread-writecurrent
nqaAdminExtPara43
OBJECT-TYPE
This object indicates the description of the nqaAdminExtPara44 object. The value is automatically assigned by the system after the type of the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.43OCTET STRINGread-onlycurrent
nqaAdminExtPara44
OBJECT-TYPE
This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara43 object after the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.44OCTET STRINGread-writecurrent
nqaAdminExtPara45
OBJECT-TYPE
This object indicates the description of the nqaAdminExtPara46 object. The value is automatically assigned by the system after the type of the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.45OCTET STRINGread-onlycurrent
nqaAdminExtPara46
OBJECT-TYPE
This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara45 object after the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.46OCTET STRINGread-writecurrent
nqaAdminExtPara47
OBJECT-TYPE
This object indicates the description of the nqaAdminExtPara48 object. The value is automatically assigned by the system after the type of the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.47OCTET STRINGread-onlycurrent
nqaAdminExtPara48
OBJECT-TYPE
This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara47 object after the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.48OCTET STRINGread-writecurrent
nqaAdminExtPara49
OBJECT-TYPE
This object indicates the description of the nqaAdminExtPara50 object. The value is automatically assigned by the system after the type of the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.49OCTET STRINGread-onlycurrent
nqaAdminExtPara50
OBJECT-TYPE
This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara49 object after the test case is ascertained.
1.3.6.1.4.1.2011.5.25.111.2.5.1.50OCTET STRINGread-writecurrent
nqaServer
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.111.3
nqaServerEnable
OBJECT-TYPE
Enables NQA server, which can be the echo server of TCP, UDP and jitter type test instance.
1.3.6.1.4.1.2011.5.25.111.3.1EnableValueread-writecurrent
nqaTcpServerTable
OBJECT-TYPE
A table which contains the status of nqa tcp server configuration information.
1.3.6.1.4.1.2011.5.25.111.3.2not-accessiblecurrent
nqaTcpServerEntry
OBJECT-TYPE
A table which contains the status of nqa tcp server configuration information. This entry is included not only the tcp server ip address but also the tcp server tcp port. If used for VPN it is also included the VPN name.
1.3.6.1.4.1.2011.5.25.111.3.2.1not-accessiblecurrent
nqaTcpServerAddressType
OBJECT-TYPE
Specifies the address type of TCP server.
1.3.6.1.4.1.2011.5.25.111.3.2.1.1InetAddressTyperead-createcurrent
nqaTcpServerAddress
OBJECT-TYPE
Specifies the address of TCP server.
1.3.6.1.4.1.2011.5.25.111.3.2.1.2InetAddressnot-accessiblecurrent
nqaTcpServerPort
OBJECT-TYPE
Specifies the port number on which TCP server is listening.
1.3.6.1.4.1.2011.5.25.111.3.2.1.3InetPortNumbernot-accessiblecurrent
nqaTcpServerVrfName
OBJECT-TYPE
Specifies the VRF (VPN Routing & Forwarding) instances name of the TCP server.
1.3.6.1.4.1.2011.5.25.111.3.2.1.4DisplayString (SIZE(1..31))not-accessiblecurrent
nqaTcpServerStatus
OBJECT-TYPE
Specifies the operation of the TCP server, creating or deleting.
1.3.6.1.4.1.2011.5.25.111.3.2.1.5RowStatusread-createcurrent
nqaUdpServerTable
OBJECT-TYPE
A table which contains the status of nqa udp server configuration information.
1.3.6.1.4.1.2011.5.25.111.3.3not-accessiblecurrent
nqaUdpServerEntry
OBJECT-TYPE
A table which contains the status of nqa udp server configuration information. This entry is includeed not only the udp server ip address but also the udp server udp port.If used for VPN it is also included the VPN name.
1.3.6.1.4.1.2011.5.25.111.3.3.1not-accessiblecurrent
nqaUdpServerAddressType
OBJECT-TYPE
Specifies the address type of UDP server.
1.3.6.1.4.1.2011.5.25.111.3.3.1.1InetAddressTyperead-createcurrent
nqaUdpServerAddress
OBJECT-TYPE
Specifies the address of UDP server.
1.3.6.1.4.1.2011.5.25.111.3.3.1.2InetAddressnot-accessiblecurrent
nqaUdpServerPort
OBJECT-TYPE
Specifies the port number on which UDP server is listening.
1.3.6.1.4.1.2011.5.25.111.3.3.1.3InetPortNumbernot-accessiblecurrent
nqaUdpServerVrfName
OBJECT-TYPE
Specifies the VRF (VPN Routing & Forwarding) instances name of the UDP server.
1.3.6.1.4.1.2011.5.25.111.3.3.1.4DisplayString (SIZE(1..31))not-accessiblecurrent
nqaUdpServerStatus
OBJECT-TYPE
Specifies the operation of the UDP server, creating or deleting.
1.3.6.1.4.1.2011.5.25.111.3.3.1.5RowStatusread-createcurrent
nqaIcmpServerTable
OBJECT-TYPE
A table which contains the status of nqa ICMP server configuration information.
1.3.6.1.4.1.2011.5.25.111.3.4not-accessiblecurrent
nqaIcmpServerEntry
OBJECT-TYPE
A table which contains the status of nqa ICMP server configuration information. This entry is included the ICMP server IP address. If used for VPN it is also included the VPN name.
1.3.6.1.4.1.2011.5.25.111.3.4.1not-accessiblecurrent
nqaIcmpServerAddress
OBJECT-TYPE
Specifies the address of ICMP server.
1.3.6.1.4.1.2011.5.25.111.3.4.1.1InetAddressnot-accessiblecurrent
nqaIcmpServerVrfName
OBJECT-TYPE
Specifies the VRF (VPN Routing & Forwarding) instances name of the ICMP server.
1.3.6.1.4.1.2011.5.25.111.3.4.1.2DisplayString (SIZE(1..31))not-accessiblecurrent
nqaIcmpServerAddressType
OBJECT-TYPE
Specifies the address type of ICMP server.
1.3.6.1.4.1.2011.5.25.111.3.4.1.3InetAddressTyperead-createcurrent
nqaIcmpServerStatus
OBJECT-TYPE
Specifies the operation of the ICMP server, creating or deleting.
1.3.6.1.4.1.2011.5.25.111.3.4.1.51RowStatusread-createcurrent
nqaStats
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.111.4
nqaResultsTable
OBJECT-TYPE
Defines the test Results Extend Table for providing the capability of performing test operations at a remote host. The results of these operations are stored in the nqaResultsTable . The operation of this table is same as that of nqaResultsTable.
1.3.6.1.4.1.2011.5.25.111.4.1not-accessiblecurrent
nqaResultsEntry
OBJECT-TYPE
The operation of this table is same as that of nqaResultsTable.
1.3.6.1.4.1.2011.5.25.111.4.1.1not-accessiblecurrent
nqaResultsIndex
OBJECT-TYPE
The result table index and times of dispatching dependency tests. Each test can only reserve 5 records. The result table only contains icmp/dns/dlsw/lspPing/Traceroute/LSP Traceroute/tcp/udp/snmp/dhcp Traceroute information.
1.3.6.1.4.1.2011.5.25.111.4.1.1.1Integer32 (1..2147483647)not-accessiblecurrent
nqaResultsHopIndex
OBJECT-TYPE
The hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1.
1.3.6.1.4.1.2011.5.25.111.4.1.1.2Integer32 (1..255)not-accessiblecurrent
nqaResultsCompletions
OBJECT-TYPE
The status of test.
1.3.6.1.4.1.2011.5.25.111.4.1.1.3INTEGER {noResult(0), success(1), failure(2)}read-onlycurrent
nqaResultsTestAttempts
OBJECT-TYPE
The times of executing tests, which includes the times of successful execution, failed execution and interruption (interrupted by human or system). The current number of test attempts. The value of this object MUST be started at 0.
1.3.6.1.4.1.2011.5.25.111.4.1.1.4Counter32read-onlycurrent
nqaResultsCurHopCount
OBJECT-TYPE
It is equal to the hop count index executed by current Traceroute or LSP Traceroute tests. Ping/LSP Ping does not use this entry. The default value is 0.
1.3.6.1.4.1.2011.5.25.111.4.1.1.5Gauge32read-onlycurrent
nqaResultsCurProbeCount
OBJECT-TYPE
The total count of probe packets of Traceroute or LSP Traceroute test in a hop count index.
1.3.6.1.4.1.2011.5.25.111.4.1.1.6Gauge32read-onlycurrent
nqaResultsRTDOverThresholds
OBJECT-TYPE
The times of successful statistics test RTD (Round Trip Delay) over the threshold.
1.3.6.1.4.1.2011.5.25.111.4.1.1.7Counter32read-onlycurrent
nqaResultsSumCompletionTime
OBJECT-TYPE
The sum of RTT (response time) of all packets of each hop for executing Traceroute, LSP Traceroute tests. The sum of RTT (response time) of sent packets for executing ping, lsp ping and disman-ping tests and so on.
1.3.6.1.4.1.2011.5.25.111.4.1.1.8Counter32read-onlycurrent
nqaResultsSumCompletionTime2Low
OBJECT-TYPE
The low order 32 bits of the accumulated squares of completion times (in milliseconds) of NQA operations which complete successfully. Low/High order is defined where the binary number will look as follows: ------------------------------------------------- | High order 32 bits | Low order 32 bits | ------------------------------------------------- For example the number 4294967296 would have all Low order bits as '0' and the rightmost High order bit will be 1 (zeros,1).
1.3.6.1.4.1.2011.5.25.111.4.1.1.9Counter32read-onlycurrent
nqaResultsSumCompletionTime2High
OBJECT-TYPE
The high order 32 bits of the accumulated squares of completion times (in milliseconds) of NQA operations which complete successfully. See the nqaResultsSumCompletionTime2Low object for a definition of Low/High Order.
1.3.6.1.4.1.2011.5.25.111.4.1.1.10Counter32read-onlycurrent
nqaResultsCompletionTimeMin
OBJECT-TYPE
The minimum RTT (for Traceroute and LSP Traceroute, it is the minimum RTT among all the packet of next hop) of all packets for executing a test.
1.3.6.1.4.1.2011.5.25.111.4.1.1.11Gauge32read-onlycurrent
nqaResultsCompletionTimeMax
OBJECT-TYPE
The maximum RTT (for Traceroute and LSP Traceroute, it is the maximum RTT among all the packets of next hop) of all packets in executing a test.
1.3.6.1.4.1.2011.5.25.111.4.1.1.12Gauge32read-onlycurrent
nqaResultsDisconnects
OBJECT-TYPE
The times of consecutive failures. For connectionless protocol type of test,this number should be zero.
1.3.6.1.4.1.2011.5.25.111.4.1.1.13Counter32read-onlycurrent
nqaResultsTimeouts
OBJECT-TYPE
The number of occasions when a NQA operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded.
1.3.6.1.4.1.2011.5.25.111.4.1.1.14Counter32read-onlycurrent
nqaResultsBusies
OBJECT-TYPE
The times of failure to apply resource due to the busy system. such as apply memory or create socket failure.
1.3.6.1.4.1.2011.5.25.111.4.1.1.15Counter32read-onlycurrent
nqaResultsNoConnections
OBJECT-TYPE
The number of occasions when a NQA operation could not be initiated because the connection to the target has not been established. For all other nqaAdminCtrlType this object will remain zero. This cannot occur for connectionless protocols, but may occur for connection oriented protocols, such as TCP. Since a NQA operation was never initiated, the completion time of these operations are not accumulated, nor do they increment nqaResultsCompletions.
1.3.6.1.4.1.2011.5.25.111.4.1.1.16Counter32read-onlycurrent
nqaResultsSequenceErrors
OBJECT-TYPE
The number of NQA operation completions received with an unexpected sequence identifier. For all other values of nqaAdminCtrlType this object will remain zero. When this has occurred some of the possible reasons maybe: - a duplicate packet was received - a response was received after it had timed-out - a corrupted packet was received and was not detected
1.3.6.1.4.1.2011.5.25.111.4.1.1.17Counter32read-onlycurrent
nqaResultsDrops
OBJECT-TYPE
The times probes of the test dropped due to sending or connecting failure.
1.3.6.1.4.1.2011.5.25.111.4.1.1.18Counter32read-onlycurrent
nqaResultsAddressType
OBJECT-TYPE
The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16).
1.3.6.1.4.1.2011.5.25.111.4.1.1.19InetAddressTyperead-onlycurrent
nqaResultsAddress
OBJECT-TYPE
The destination address (TraceRoute is the destination address of each hop, and ping is the destination address of tests).
1.3.6.1.4.1.2011.5.25.111.4.1.1.20InetAddressread-onlycurrent
nqaResultsProbeResponses
OBJECT-TYPE
Number of responses received for the corresponding test. The value of this object MUST be reported as 0 when no probe responses have been received.
1.3.6.1.4.1.2011.5.25.111.4.1.1.21Counter32read-onlycurrent
nqaResultsSentProbes
OBJECT-TYPE
The value of this object reflects the number of probes sent for the corresponding test. The value of this object MUST be reported as 0 when no probes have been sent.
1.3.6.1.4.1.2011.5.25.111.4.1.1.22Counter32read-onlycurrent
nqaResultsLastGoodProbe
OBJECT-TYPE
Date and time when the last response was received for a probe.
1.3.6.1.4.1.2011.5.25.111.4.1.1.23DateAndTimeread-onlycurrent
nqaResultsLastGoodPath
OBJECT-TYPE
The date and time when the last complete path was determined.
1.3.6.1.4.1.2011.5.25.111.4.1.1.24DateAndTimeread-onlycurrent
nqaResultsTestFinished
OBJECT-TYPE
The status of test execution.
1.3.6.1.4.1.2011.5.25.111.4.1.1.25INTEGER {noFinish(0), finish(1)}read-onlycurrent
nqaResultsRttAvg
OBJECT-TYPE
The average of RTTs that were successfully measured by tests.
1.3.6.1.4.1.2011.5.25.111.4.1.1.26Gauge32read-onlycurrent
nqaResultsLostPacketRatio
OBJECT-TYPE
The ratio of the packets lost to all packets sent in the test.
1.3.6.1.4.1.2011.5.25.111.4.1.1.27Gauge32read-onlycurrent
nqaHTTPStatsTable
OBJECT-TYPE
The statistics collection database. Defines the HTTP Operations Statistics Table for storing the statistics of a HTTP test.
1.3.6.1.4.1.2011.5.25.111.4.2not-accessiblecurrent
nqaHTTPStatsEntry
OBJECT-TYPE
Defines an entry in the nqaHTTPStatsTable.
1.3.6.1.4.1.2011.5.25.111.4.2.1not-accessiblecurrent
nqaHTTPStatsIndex
OBJECT-TYPE
The The HTTP statistics table index and times of dispatching dependency tests.
1.3.6.1.4.1.2011.5.25.111.4.2.1.1Integer32 (1..2147483647)not-accessiblecurrent
nqaHTTPStatsCompletions
OBJECT-TYPE
The status of HTTP test.
1.3.6.1.4.1.2011.5.25.111.4.2.1.2INTEGER {noResult(0), success(1), failure(2)}read-onlycurrent
nqaHTTPStatsRTDOverThresholds
OBJECT-TYPE
The number of HTTP operations RTD (Round Trip Delay) that violate threshold.
1.3.6.1.4.1.2011.5.25.111.4.2.1.3Counter32read-onlycurrent
nqaHTTPStatsRTTSum
OBJECT-TYPE
The sum of delay time of successful HTTP probes, including the sum of time of DNS query, TCP establishment and packets transmission.
1.3.6.1.4.1.2011.5.25.111.4.2.1.4Counter32read-onlycurrent
nqaHTTPStatsRTTMin
OBJECT-TYPE
The minimum value of HTTP probe time.
1.3.6.1.4.1.2011.5.25.111.4.2.1.5Gauge32read-onlycurrent
nqaHTTPStatsRTTMax
OBJECT-TYPE
The maximum value of HTTP probe time.
1.3.6.1.4.1.2011.5.25.111.4.2.1.6Gauge32read-onlycurrent
nqaHTTPStatsDNSRTTSum
OBJECT-TYPE
The sum of DNS query time.
1.3.6.1.4.1.2011.5.25.111.4.2.1.7Counter32read-onlycurrent
nqaHTTPStatsDNSRTTMin
OBJECT-TYPE
The minimum of DNS query time.
1.3.6.1.4.1.2011.5.25.111.4.2.1.8Gauge32read-onlycurrent
nqaHTTPStatsDNSRTTMax
OBJECT-TYPE
The maximum of DNS query time.
1.3.6.1.4.1.2011.5.25.111.4.2.1.9Gauge32read-onlycurrent
nqaHTTPStatsTCPConnectRTTSum
OBJECT-TYPE
The sum of TCP connection time.
1.3.6.1.4.1.2011.5.25.111.4.2.1.10Counter32read-onlycurrent
nqaHTTPStatsTCPConnectRTTMin
OBJECT-TYPE
The minimum value of TCP connection time.
1.3.6.1.4.1.2011.5.25.111.4.2.1.11Gauge32read-onlycurrent
nqaHTTPStatsTCPConnectRTTMax
OBJECT-TYPE
The maximum value of TCP connection time.
1.3.6.1.4.1.2011.5.25.111.4.2.1.12Gauge32read-onlycurrent
nqaHTTPStatsTransactionRTTSum
OBJECT-TYPE
The sum of transaction time.
1.3.6.1.4.1.2011.5.25.111.4.2.1.13Counter32read-onlycurrent
nqaHTTPStatsTransactionRTTMin
OBJECT-TYPE
The minimum value of transaction time.
1.3.6.1.4.1.2011.5.25.111.4.2.1.14Gauge32read-onlycurrent
nqaHTTPStatsTransactionRTTMax
OBJECT-TYPE
The maximum value of transaction time.
1.3.6.1.4.1.2011.5.25.111.4.2.1.15Gauge32read-onlycurrent
nqaHTTPStatsMessageBodyOctetsSum
OBJECT-TYPE
The sum of the size of the message body received as a response to the HTTP request.
1.3.6.1.4.1.2011.5.25.111.4.2.1.16Counter32read-onlycurrent
nqaHTTPStatsDNSServerTimeouts
OBJECT-TYPE
The number of requests that timed out during DNS query.
1.3.6.1.4.1.2011.5.25.111.4.2.1.17Counter32read-onlycurrent
nqaHTTPStatsTCPConnectTimeouts
OBJECT-TYPE
The number of requests that timed out during HTTP connection.
1.3.6.1.4.1.2011.5.25.111.4.2.1.18Counter32read-onlycurrent
nqaHTTPStatsTransactionTimeouts
OBJECT-TYPE
The number of requests that timed out during HTTP transaction.
1.3.6.1.4.1.2011.5.25.111.4.2.1.19Counter32read-onlycurrent
nqaHTTPStatsDNSQueryErrors
OBJECT-TYPE
The number of requests that had DNS query errors.
1.3.6.1.4.1.2011.5.25.111.4.2.1.20Counter32read-onlycurrent
nqaHTTPStatsErrors
OBJECT-TYPE
The number of HTTP transaction failures.
1.3.6.1.4.1.2011.5.25.111.4.2.1.21Counter32read-onlycurrent
nqaHTTPStatsTcpConnErrors
OBJECT-TYPE
The number of TCP connection failures.
1.3.6.1.4.1.2011.5.25.111.4.2.1.22Counter32read-onlycurrent
nqaHTTPStatsProbeResponses
OBJECT-TYPE
Number of responses received for the corresponding test. The value of this object MUST be reported as 0 when no probe responses have been received.
1.3.6.1.4.1.2011.5.25.111.4.2.1.23Counter32read-onlycurrent
nqaHTTPStatsSendProbes
OBJECT-TYPE
The number of sending probes.
1.3.6.1.4.1.2011.5.25.111.4.2.1.24Counter32read-onlycurrent
nqaHTTPStatsBusies
OBJECT-TYPE
The number of occasions when a HTTP operation could not be initiated because an internal error.
1.3.6.1.4.1.2011.5.25.111.4.2.1.25Counter32read-onlycurrent
nqaHTTPStatsTestFinished
OBJECT-TYPE
The status of test execution.
1.3.6.1.4.1.2011.5.25.111.4.2.1.26INTEGER {noFinish(0), finish(1)}read-onlycurrent
nqaHTTPStatsRttAvg
OBJECT-TYPE
The average of RTTs that were successfully measured by tests.
1.3.6.1.4.1.2011.5.25.111.4.2.1.27Gauge32read-onlycurrent
nqaHTTPStatsLostPacketRatio
OBJECT-TYPE
The ratio of the packets lost to all packets sent in the test.
1.3.6.1.4.1.2011.5.25.111.4.2.1.28Gauge32read-onlycurrent
nqaJitterStatsTable
OBJECT-TYPE
A table which contains the status of latest Jitter operation.
1.3.6.1.4.1.2011.5.25.111.4.3not-accessiblecurrent
nqaJitterStatsEntry
OBJECT-TYPE
A table which contains the status of latest Jitter operation. This entry is created only if the nqaAdminCtrlType is jitterAppl.
1.3.6.1.4.1.2011.5.25.111.4.3.1not-accessiblecurrent
nqaJitterStatsIndex
OBJECT-TYPE
The third index of jitter statistics table.
1.3.6.1.4.1.2011.5.25.111.4.3.1.1Integer32 (1..2147483647)not-accessiblecurrent
nqaJitterStatsCompletions
OBJECT-TYPE
The result of the test, which value can be noResult (0), success (1), failure (2) or negotiateFailed (3). If the test is still running, the value will be noResult (0).
1.3.6.1.4.1.2011.5.25.111.4.3.1.2INTEGER {noResult(0), success(1), failure(2), negotiateFailed(3)}read-onlycurrent
nqaJitterStatsRTDOverThresholds
OBJECT-TYPE
The number of tests that violate RTD (Round Trip Delay) threshold.
1.3.6.1.4.1.2011.5.25.111.4.3.1.3Counter32read-onlycurrent
nqaJitterStatsNumOfRTT
OBJECT-TYPE
The number of RTTs that are successfully measured by tests.
1.3.6.1.4.1.2011.5.25.111.4.3.1.4Counter32read-onlycurrent
nqaJitterStatsRTTSum
OBJECT-TYPE
The sum of RTTs that are successfully measured.
1.3.6.1.4.1.2011.5.25.111.4.3.1.5Counter32read-onlycurrent
nqaJitterStatsRTTSum2Low
OBJECT-TYPE
The sum of squares of RTTs that are successfully measured by tests (low order 32 bits).
1.3.6.1.4.1.2011.5.25.111.4.3.1.6Counter32read-onlycurrent
nqaJitterStatsRTTSum2High
OBJECT-TYPE
The sum of squares of RTTs that are successfully measured by tests (high order 32 bits).
1.3.6.1.4.1.2011.5.25.111.4.3.1.7Counter32read-onlycurrent
nqaJitterStatsRTTMin
OBJECT-TYPE
The minimum of RTTs that were successfully measured by tests.
1.3.6.1.4.1.2011.5.25.111.4.3.1.8Gauge32read-onlycurrent
nqaJitterStatsRTTMax
OBJECT-TYPE
The maximum of RTTs that were successfully measured by tests.
1.3.6.1.4.1.2011.5.25.111.4.3.1.9Gauge32read-onlycurrent
nqaJitterStatsMinOfPositivesSD
OBJECT-TYPE
The minimum of absolute value of all positive jitter values from source to destination.
1.3.6.1.4.1.2011.5.25.111.4.3.1.10Gauge32read-onlycurrent
nqaJitterStatsMaxOfPositivesSD
OBJECT-TYPE
The maximum of absolute value of all positive jitter values from source to destination.
1.3.6.1.4.1.2011.5.25.111.4.3.1.11Gauge32read-onlycurrent
nqaJitterStatsNumOfPositivesSD
OBJECT-TYPE
The number of all positive jitter values from source to destination.
1.3.6.1.4.1.2011.5.25.111.4.3.1.12Counter32read-onlycurrent
nqaJitterStatsSumOfPositivesSD
OBJECT-TYPE
The sum of absolute value of all positive jitter values from source to destination.
1.3.6.1.4.1.2011.5.25.111.4.3.1.13Counter32read-onlycurrent
nqaJitterStatsSum2OfPositivesSDLow
OBJECT-TYPE
The sum of squares of absolute value of all positive jitter values from source to destination (low order 32 bits).
1.3.6.1.4.1.2011.5.25.111.4.3.1.14Counter32read-onlycurrent
nqaJitterStatsSum2OfPositivesSDHigh
OBJECT-TYPE
The sum of squares of absolute value of all positive jitter values from source to destination (high order 32 bits).
1.3.6.1.4.1.2011.5.25.111.4.3.1.15Counter32read-onlycurrent
nqaJitterStatsMinOfNegativesSD
OBJECT-TYPE
The minimum of absolute value of all negative jitter values from source to destination.
1.3.6.1.4.1.2011.5.25.111.4.3.1.16Gauge32read-onlycurrent
nqaJitterStatsMaxOfNegativesSD
OBJECT-TYPE
The maximum of absolute value of all negative jitter values from source to destination.
1.3.6.1.4.1.2011.5.25.111.4.3.1.17Gauge32read-onlycurrent
nqaJitterStatsNumOfNegativesSD
OBJECT-TYPE
The number of all negative jitter values from source to destination.
1.3.6.1.4.1.2011.5.25.111.4.3.1.18Counter32read-onlycurrent
nqaJitterStatsSumOfNegativesSD
OBJECT-TYPE
The sum of absolute value of all negative jitter values from source to destination.
1.3.6.1.4.1.2011.5.25.111.4.3.1.19Counter32read-onlycurrent
nqaJitterStatsSum2OfNegativesSDLow
OBJECT-TYPE
The sum of squares of absolute value of all negative values from source to destination (low order 32 bits).
1.3.6.1.4.1.2011.5.25.111.4.3.1.20Counter32read-onlycurrent
nqaJitterStatsSum2OfNegativesSDHigh
OBJECT-TYPE
The sum of squares of absolute value of all negative values from source to destination (high order 32 bits).
1.3.6.1.4.1.2011.5.25.111.4.3.1.21Counter32read-onlycurrent
nqaJitterStatsMinOfPositivesDS
OBJECT-TYPE
The minimum of absolute value of all positive jitter values from destination to source.
1.3.6.1.4.1.2011.5.25.111.4.3.1.22Gauge32read-onlycurrent
nqaJitterStatsMaxOfPositivesDS
OBJECT-TYPE
The maximum of absolute value of all positive jitter values from destination to source.
1.3.6.1.4.1.2011.5.25.111.4.3.1.23Gauge32read-onlycurrent
nqaJitterStatsNumOfPositivesDS
OBJECT-TYPE
The number of all positive jitter values from destination to source.
1.3.6.1.4.1.2011.5.25.111.4.3.1.24Counter32read-onlycurrent
nqaJitterStatsSumOfPositivesDS
OBJECT-TYPE
The sum of absolute value of all positive jitter values from destination to source.
1.3.6.1.4.1.2011.5.25.111.4.3.1.25Counter32read-onlycurrent
nqaJitterStatsSum2OfPositivesDSLow
OBJECT-TYPE
The sum of squares of absolute value of all positive jitter values from destination to source (low order 32 bits).
1.3.6.1.4.1.2011.5.25.111.4.3.1.26Counter32read-onlycurrent
nqaJitterStatsSum2OfPositivesDSHigh
OBJECT-TYPE
The sum of squares of absolute value of all positive jitter values from destination to source (high order 32 bits).
1.3.6.1.4.1.2011.5.25.111.4.3.1.27Counter32read-onlycurrent
nqaJitterStatsMinOfNegativesDS
OBJECT-TYPE
The minimum of absolute value of all negative jitter values from destination to source.
1.3.6.1.4.1.2011.5.25.111.4.3.1.28Gauge32read-onlycurrent
nqaJitterStatsMaxOfNegativesDS
OBJECT-TYPE
The maximum of absolute value of all negative jitter values from destination to source.
1.3.6.1.4.1.2011.5.25.111.4.3.1.29Gauge32read-onlycurrent
nqaJitterStatsNumOfNegativesDS
OBJECT-TYPE
The number of all negative jitter values from destination to source.
1.3.6.1.4.1.2011.5.25.111.4.3.1.30Counter32read-onlycurrent
nqaJitterStatsSumOfNegativesDS
OBJECT-TYPE
The sum of absolute value of all negative jitter values from destination to source.
1.3.6.1.4.1.2011.5.25.111.4.3.1.31Counter32read-onlycurrent
nqaJitterStatsSum2OfNegativesDSLow
OBJECT-TYPE
The sum of squares of absolute value of all negative values from destination to source (low order 32 bits).
1.3.6.1.4.1.2011.5.25.111.4.3.1.32Counter32read-onlycurrent
nqaJitterStatsSum2OfNegativesDSHigh
OBJECT-TYPE
The sum of squares of absolute value of all negative values from destination to source (high order 32 bits).
1.3.6.1.4.1.2011.5.25.111.4.3.1.33Counter32read-onlycurrent
nqaJitterStatsPacketLossSD
OBJECT-TYPE
The number of packets lost when sent from source to destination.
1.3.6.1.4.1.2011.5.25.111.4.3.1.34Counter32read-onlycurrent
nqaJitterStatsPacketLossDS
OBJECT-TYPE
The number of packets lost when sent from destination to source.
1.3.6.1.4.1.2011.5.25.111.4.3.1.35Counter32read-onlycurrent
nqaJitterStatsPacketOutOfSequences
OBJECT-TYPE
The number of packets arrived out of sequence.
1.3.6.1.4.1.2011.5.25.111.4.3.1.36Counter32read-onlycurrent
nqaJitterStatsErrors
OBJECT-TYPE
The number of errors occurred in the test.
1.3.6.1.4.1.2011.5.25.111.4.3.1.37Counter32read-onlycurrent
nqaJitterStatsBusies
OBJECT-TYPE
The number of occasions when a test couldn't be initialized because the previous test has not completed.
1.3.6.1.4.1.2011.5.25.111.4.3.1.38Counter32read-onlycurrent
nqaJitterStatsTimeouts
OBJECT-TYPE
The number of responses arrived over the time.
1.3.6.1.4.1.2011.5.25.111.4.3.1.39Counter32read-onlycurrent
nqaJitterStatsProbeResponses
OBJECT-TYPE
The number of responses from echo-server for the packets sent by the test.
1.3.6.1.4.1.2011.5.25.111.4.3.1.40Counter32read-onlycurrent
nqaJitterStatsSentProbes
OBJECT-TYPE
The number of packets sent in the test.
1.3.6.1.4.1.2011.5.25.111.4.3.1.41Counter32read-onlycurrent
nqaJitterStatsDrops
OBJECT-TYPE
The number of packets that were sent failed in the test.
1.3.6.1.4.1.2011.5.25.111.4.3.1.42Counter32read-onlycurrent
nqaJitterStatsTestFinished
OBJECT-TYPE
The status of the test, which value can be noFinish (0) or finish (1).
1.3.6.1.4.1.2011.5.25.111.4.3.1.43INTEGER {noFinish(0), finish(1)}read-onlycurrent
nqaJitterStatsMaxDelaySD
OBJECT-TYPE
The maximum of all OWD (One Way Delay) from source to destination.
1.3.6.1.4.1.2011.5.25.111.4.3.1.44Gauge32read-onlycurrent
nqaJitterStatsMaxDelayDS
OBJECT-TYPE
The maximum of all OWD (One Way Delay) from destination to source.
1.3.6.1.4.1.2011.5.25.111.4.3.1.45Gauge32read-onlycurrent
nqaJitterStatsRTTAvg
OBJECT-TYPE
The average of RTTs that were successfully measured by tests.
1.3.6.1.4.1.2011.5.25.111.4.3.1.46Gauge32read-onlycurrent
nqaJitterStatsPacketLossRatio
OBJECT-TYPE
The ratio of the packets lost to all packets sent in the test.
1.3.6.1.4.1.2011.5.25.111.4.3.1.47Gauge32read-onlycurrent
nqaJitterStatsAvgJitter
OBJECT-TYPE
The average of jitter values that were successfully measured by tests.
1.3.6.1.4.1.2011.5.25.111.4.3.1.48Gauge32read-onlycurrent
nqaJitterStatsAvgJitterSD
OBJECT-TYPE
The average of jitter values from source to destination that were successfully measured by tests.
1.3.6.1.4.1.2011.5.25.111.4.3.1.49Gauge32read-onlycurrent
nqaJitterStatsAvgJitterDS
OBJECT-TYPE
The average of jitter values from destination to source that were successfully measured by tests.
1.3.6.1.4.1.2011.5.25.111.4.3.1.50Gauge32read-onlycurrent
nqaJitterStatsJitterOut
OBJECT-TYPE
Jitter (RFC1889) at responder.
1.3.6.1.4.1.2011.5.25.111.4.3.1.51OCTET STRINGread-onlycurrent
nqaJitterStatsJitterIn
OBJECT-TYPE
Jitter (RFC1889) at sender.
1.3.6.1.4.1.2011.5.25.111.4.3.1.52OCTET STRINGread-onlycurrent
nqaJitterStatsOWDOverThresholdsSD
OBJECT-TYPE
The number of tests that violate OWD (One Way Delay) threshold from source to destination.
1.3.6.1.4.1.2011.5.25.111.4.3.1.53Counter32read-onlycurrent
nqaJitterStatsPktLossUnknown
OBJECT-TYPE
The number of packets lost for which we can't determine the direction.
1.3.6.1.4.1.2011.5.25.111.4.3.1.54Counter32read-onlycurrent
nqaJitterStatsNumOfOWD
OBJECT-TYPE
The number of OWDs that were successfully measured by tests.
1.3.6.1.4.1.2011.5.25.111.4.3.1.55Counter32read-onlycurrent
nqaJitterStatsOWSumSD
OBJECT-TYPE
The sum of OWDs that were successfully measured by tests from source to destination.
1.3.6.1.4.1.2011.5.25.111.4.3.1.56Counter32read-onlycurrent
nqaJitterStatsOWSumDS
OBJECT-TYPE
The sum of OWDs that were successfully measured by tests from destination to source.
1.3.6.1.4.1.2011.5.25.111.4.3.1.57Counter32read-onlycurrent
nqaJitterStatsOWDOverThresholdsDS
OBJECT-TYPE
The number of tests that violate OWD (One Way Delay) threshold from destination to source.
1.3.6.1.4.1.2011.5.25.111.4.3.1.58Counter32read-onlycurrent
nqaJitterStatsOperOfIcpif
OBJECT-TYPE
The ICPIF (Calculated Planning Impairment Factor) value for the latest jitter test.
1.3.6.1.4.1.2011.5.25.111.4.3.1.59Gauge32read-onlycurrent
nqaJitterStatsOperOfMos
OBJECT-TYPE
The MOS (Mean Opinion Score) value for the latest jitter test.
1.3.6.1.4.1.2011.5.25.111.4.3.1.60Gauge32read-onlycurrent
nqaJitterStatsMinDelaySD
OBJECT-TYPE
The minimum of all one way time from source to destination.
1.3.6.1.4.1.2011.5.25.111.4.3.1.61Gauge32read-onlycurrent
nqaJitterStatsSum2DelaySDLow
OBJECT-TYPE
The low order 32 bits of the sum of squares of one way time from source to destination.
1.3.6.1.4.1.2011.5.25.111.4.3.1.62Gauge32read-onlycurrent
nqaJitterStatsSum2DelaySDHigh
OBJECT-TYPE
The high order 32 bits of the sum of squares of one way time from source to destination.
1.3.6.1.4.1.2011.5.25.111.4.3.1.63Counter32read-onlycurrent
nqaJitterStatsMinDelayDS
OBJECT-TYPE
The minimum of all one way time from destination to source.
1.3.6.1.4.1.2011.5.25.111.4.3.1.64Gauge32read-onlycurrent
nqaJitterStatsSum2DelayDSLow
OBJECT-TYPE
The low order 32 bits of the sum of squares of one way time from destination to source.
1.3.6.1.4.1.2011.5.25.111.4.3.1.65Gauge32read-onlycurrent
nqaJitterStatsSum2DelayDSHigh
OBJECT-TYPE
The low order 32 bits of the sum of squares of one way time from destination to source.
1.3.6.1.4.1.2011.5.25.111.4.3.1.66Counter32read-onlycurrent
nqaJitterStatsTimeUnit
OBJECT-TYPE
The unit of the timestamp, ms or us.
1.3.6.1.4.1.2011.5.25.111.4.3.1.67INTEGER {us(1), ms(2)}read-onlycurrent
nqaJitterStatsAvgDelaySD
OBJECT-TYPE
The average of one way time from source to destination.
1.3.6.1.4.1.2011.5.25.111.4.3.1.68Gauge32read-onlycurrent
nqaJitterStatsAvgDelayDS
OBJECT-TYPE
The average of one way time from destination to source.
1.3.6.1.4.1.2011.5.25.111.4.3.1.69Gauge32read-onlycurrent
nqaJitterStatsPktRewriteNum
OBJECT-TYPE
The number of packets have been rewrited.
1.3.6.1.4.1.2011.5.25.111.4.3.1.70Counter32read-onlycurrent
nqaJitterStatsPktRewriteRatio
OBJECT-TYPE
The ratio of packets have been rewrited.
1.3.6.1.4.1.2011.5.25.111.4.3.1.71Gauge32read-onlycurrent
nqaJitterStatsPktDisorderNum
OBJECT-TYPE
The number of packets have been disordered.
1.3.6.1.4.1.2011.5.25.111.4.3.1.72Counter32read-onlycurrent
nqaJitterStatsPktDisorderRatio
OBJECT-TYPE
The ratio of packets have been disordered.
1.3.6.1.4.1.2011.5.25.111.4.3.1.73Gauge32read-onlycurrent
nqaJitterStatsFragPktDisorderNum
OBJECT-TYPE
The number of packets whose fragments have been disordered.
1.3.6.1.4.1.2011.5.25.111.4.3.1.74Counter32read-onlycurrent
nqaJitterStatsFragPktDisorderRatio
OBJECT-TYPE
The ratio of packets whose fragments have been disordered.
1.3.6.1.4.1.2011.5.25.111.4.3.1.75Gauge32read-onlycurrent
nqaFTPStatsTable
OBJECT-TYPE
The statistics collection database. Defines the FTP Operations Statistics Table for storing the statistics of a FTP test.
1.3.6.1.4.1.2011.5.25.111.4.4not-accessiblecurrent
nqaFTPStatsEntry
OBJECT-TYPE
Defines an entry in the nqaFTPStatsTable.
1.3.6.1.4.1.2011.5.25.111.4.4.1not-accessiblecurrent
nqaFTPStatsIndex
OBJECT-TYPE
FTP statistics table index and times of dispatching dependency tests.
1.3.6.1.4.1.2011.5.25.111.4.4.1.1Integer32 (1..2147483647)not-accessiblecurrent
nqaFTPStatsCompletions
OBJECT-TYPE
The status of FTP test.
1.3.6.1.4.1.2011.5.25.111.4.4.1.2INTEGER {noResult(0), success(1), failure(2)}read-onlycurrent
nqaFTPStatsRTDOverThresholds
OBJECT-TYPE
The times of successful statistics test RTD (Round Trip Delay) over the threshold.
1.3.6.1.4.1.2011.5.25.111.4.4.1.3Counter32read-onlycurrent
nqaFTPStatsCtrlConnMaxTime
OBJECT-TYPE
The maximum value of the control connection time.
1.3.6.1.4.1.2011.5.25.111.4.4.1.4Gauge32read-onlycurrent
nqaFTPStatsCtrlConnMinTime
OBJECT-TYPE
The minimum value of the control connection time.
1.3.6.1.4.1.2011.5.25.111.4.4.1.5Gauge32read-onlycurrent
nqaFTPStatsCtrlConnAveTime
OBJECT-TYPE
The average value of the control connection time.
1.3.6.1.4.1.2011.5.25.111.4.4.1.6Gauge32read-onlycurrent
nqaFTPStatsDataConnMaxTime
OBJECT-TYPE
The maximum value of the data connection time.
1.3.6.1.4.1.2011.5.25.111.4.4.1.7Gauge32read-onlycurrent
nqaFTPStatsDataConnMinTime
OBJECT-TYPE
The minimum value of the data connection time.
1.3.6.1.4.1.2011.5.25.111.4.4.1.8Gauge32read-onlycurrent
nqaFTPStatsDataConnAveTime
OBJECT-TYPE
The average value of the data connection time.
1.3.6.1.4.1.2011.5.25.111.4.4.1.9Gauge32read-onlycurrent
nqaFTPStatsConnectSumTimeMax
OBJECT-TYPE
The maximum value of the FTP probe time.
1.3.6.1.4.1.2011.5.25.111.4.4.1.10Gauge32read-onlycurrent
nqaFTPStatsConnectSumTimeMin
OBJECT-TYPE
The mininum value of the FTP probe time.
1.3.6.1.4.1.2011.5.25.111.4.4.1.11Gauge32read-onlycurrent
nqaFTPStatsConnectSumTimeAve
OBJECT-TYPE
The average value of the FTP probe time.
1.3.6.1.4.1.2011.5.25.111.4.4.1.12Gauge32read-onlycurrent
nqaFTPStatsMessageBodyOctetsSum
OBJECT-TYPE
The accumulated octets of a FTP test.
1.3.6.1.4.1.2011.5.25.111.4.4.1.13Counter32read-onlycurrent
nqaFTPStatsErrors
OBJECT-TYPE
The number of some other errors.
1.3.6.1.4.1.2011.5.25.111.4.4.1.14Counter32read-onlycurrent
nqaFTPStatsTimeouts
OBJECT-TYPE
The number of occasions when a FTP operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded.
1.3.6.1.4.1.2011.5.25.111.4.4.1.15Counter32read-onlycurrent
nqaFTPStatsDiscontinued
OBJECT-TYPE
The number of occasions when a FTP test was interrupted by the user.
1.3.6.1.4.1.2011.5.25.111.4.4.1.16Counter32read-onlycurrent
nqaFTPStatsProbeResponses
OBJECT-TYPE
Number of responses received for the corresponding test. The value of this object MUST be reported as 0 when no probe responses have been received.
1.3.6.1.4.1.2011.5.25.111.4.4.1.17Counter32read-onlycurrent
nqaFTPStatsSendProbes
OBJECT-TYPE
The number of sending probe
1.3.6.1.4.1.2011.5.25.111.4.4.1.18Counter32read-onlycurrent
nqaFTPStatsTestFinished
OBJECT-TYPE
The status of test execution.
1.3.6.1.4.1.2011.5.25.111.4.4.1.19INTEGER {noFinish(0), finish(1)}read-onlycurrent
nqaFTPStatsRttAvg
OBJECT-TYPE
The average of RTTs that were successfully measured by tests.
1.3.6.1.4.1.2011.5.25.111.4.4.1.20Gauge32read-onlycurrent
nqaFTPStatsLostPacketRatio
OBJECT-TYPE
The ratio of the packets lost to all packets sent in the test.
1.3.6.1.4.1.2011.5.25.111.4.4.1.21Gauge32read-onlycurrent
nqaMpingStatsTable
OBJECT-TYPE
The statistics collection database. Defines the Mping Operations Statistics Table for storing the statistics of a Mping test.
1.3.6.1.4.1.2011.5.25.111.4.5not-accessiblecurrent
nqaMpingStatsEntry
OBJECT-TYPE
Defines an entry in the nqaMpingStatsTable.
1.3.6.1.4.1.2011.5.25.111.4.5.1not-accessiblecurrent
nqaMpingStatsIndex
OBJECT-TYPE
The index of mping statistics table, and the times of dispatching dependency tests.
1.3.6.1.4.1.2011.5.25.111.4.5.1.1Integer32 (1..2147483647)not-accessiblecurrent
nqaMpingStatsReceiverIndex
OBJECT-TYPE
The index of receiver ,that received the mping request packet and response the reply packet .
1.3.6.1.4.1.2011.5.25.111.4.5.1.2Integer32 (1..2147483647)not-accessiblecurrent
nqaMpingStatsTargetAddressType
OBJECT-TYPE
The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16).
1.3.6.1.4.1.2011.5.25.111.4.5.1.3InetAddressTyperead-onlycurrent
nqaMpingStatsTargetAddress
OBJECT-TYPE
The destination address .
1.3.6.1.4.1.2011.5.25.111.4.5.1.4InetAddressread-onlycurrent
nqaMpingStatsReceiverAddress
OBJECT-TYPE
The address of mping receiver
1.3.6.1.4.1.2011.5.25.111.4.5.1.5InetAddressread-onlycurrent
nqaMpingStatsCompletions
OBJECT-TYPE
The status of test.
1.3.6.1.4.1.2011.5.25.111.4.5.1.6INTEGER {noResult(1), success(2), failure(3)}read-onlycurrent
nqaMpingStatsRTDOverThresholds
OBJECT-TYPE
The times of successful statistics test RTD (Round Trip Delay) over the threshold.
1.3.6.1.4.1.2011.5.25.111.4.5.1.7Counter32read-onlycurrent
nqaMpingStatsSumCompletionTime
OBJECT-TYPE
The sum of RTT (response time) of sent packets.
1.3.6.1.4.1.2011.5.25.111.4.5.1.8Counter32read-onlycurrent
nqaMpingStatsSumCompletionTime2Low
OBJECT-TYPE
The low order 32 bits of the sum of squares of RTT (response time) for each packet of test execution.
1.3.6.1.4.1.2011.5.25.111.4.5.1.9Counter32read-onlycurrent
nqaMpingStatsSumCompletionTime2High
OBJECT-TYPE
The high order 32 bits of the sum of squares of RTT (response time) for each packet of test execution.
1.3.6.1.4.1.2011.5.25.111.4.5.1.10Counter32read-onlycurrent
nqaMpingStatsCompletionTimeMin
OBJECT-TYPE
The minimum RTT of all packets for executing a test.
1.3.6.1.4.1.2011.5.25.111.4.5.1.11Gauge32read-onlycurrent
nqaMpingStatsCompletionTimeMax
OBJECT-TYPE
The maximum RTT of all packets in executing a test.
1.3.6.1.4.1.2011.5.25.111.4.5.1.12Gauge32read-onlycurrent
nqaMpingStatsTimeouts
OBJECT-TYPE
The number of occasions when a NQA operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded.
1.3.6.1.4.1.2011.5.25.111.4.5.1.13Counter32read-onlycurrent
nqaMpingStatsBusies
OBJECT-TYPE
The times of failure to apply resource due to the busy system. such as apply memory or create socket failure.
1.3.6.1.4.1.2011.5.25.111.4.5.1.14Counter32read-onlycurrent
nqaMpingStatsSequenceErrors
OBJECT-TYPE
The times that sequence error happends.
1.3.6.1.4.1.2011.5.25.111.4.5.1.15Counter32read-onlycurrent
nqaMpingStatsDrops
OBJECT-TYPE
The times probes of the test dropped due to sending or connecting failure .
1.3.6.1.4.1.2011.5.25.111.4.5.1.16Counter32read-onlycurrent
nqaMpingStatsProbeResponses
OBJECT-TYPE
The number of received reponse packets.
1.3.6.1.4.1.2011.5.25.111.4.5.1.17Counter32read-onlycurrent
nqaMpingStatsSentProbes
OBJECT-TYPE
The number of sent packets.
1.3.6.1.4.1.2011.5.25.111.4.5.1.18Counter32read-onlycurrent
nqaMpingStatsLastGoodProbe
OBJECT-TYPE
Date and time when the last response was received for a probe.
1.3.6.1.4.1.2011.5.25.111.4.5.1.19DateAndTimeread-onlycurrent
nqaMpingStatsTestFinished
OBJECT-TYPE
The status of test execution.
1.3.6.1.4.1.2011.5.25.111.4.5.1.20INTEGER {noFinish(1), finish(2)}read-onlycurrent
nqaMpingStatsReceiverCount
OBJECT-TYPE
The current serial number of receivers.
1.3.6.1.4.1.2011.5.25.111.4.5.1.21Gauge32read-onlycurrent
nqaMpingStatsLastFibHit
OBJECT-TYPE
Whether the fib is hit on the device when receiving the last packet.
1.3.6.1.4.1.2011.5.25.111.4.5.1.22TruthValueread-onlycurrent
nqaMpingStatsRttAvg
OBJECT-TYPE
The average of RTTs that were successfully measured by tests.
1.3.6.1.4.1.2011.5.25.111.4.5.1.23Gauge32read-onlycurrent
nqaMpingStatsLostPacketRatio
OBJECT-TYPE
The ratio of the packets lost to all packets sent in the test.
1.3.6.1.4.1.2011.5.25.111.4.5.1.24Gauge32read-onlycurrent
nqaMtracertStatsTable
OBJECT-TYPE
The statistics collection database. Defines the Mping Operations Statistics Table for storing the statistics of a Mping test.
1.3.6.1.4.1.2011.5.25.111.4.6not-accessiblecurrent
nqaMtracertStatsEntry
OBJECT-TYPE
The operation of this table is same as that of nqaResultsTable.
1.3.6.1.4.1.2011.5.25.111.4.6.1not-accessiblecurrent
nqaMtracertStatsIndex
OBJECT-TYPE
The index of mping statistics table, and the times of dispatching dependency tests.
1.3.6.1.4.1.2011.5.25.111.4.6.1.1Integer32 (1..2147483647)not-accessiblecurrent
nqaMtracertStatsHopIndex
OBJECT-TYPE
The index of Mtracert hop
1.3.6.1.4.1.2011.5.25.111.4.6.1.2Integer32 (1..255)not-accessiblecurrent
nqaMtracertStatsAddressType
OBJECT-TYPE
The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16).
1.3.6.1.4.1.2011.5.25.111.4.6.1.3InetAddressTyperead-onlycurrent
nqaMtracertStatsAddress
OBJECT-TYPE
The destination address (TraceRoute is the source address of the last valuable response package).
1.3.6.1.4.1.2011.5.25.111.4.6.1.4InetAddressread-onlycurrent
nqaMtracertStatsCompletions
OBJECT-TYPE
The status of test.
1.3.6.1.4.1.2011.5.25.111.4.6.1.5INTEGER {noResult(1), success(2), failure(3)}read-onlycurrent
nqaMtracertStatsCurHopCount
OBJECT-TYPE
It is equal to the hop count index executed by current tests. The default value is 0.
1.3.6.1.4.1.2011.5.25.111.4.6.1.6Gauge32read-onlycurrent
nqaMtracertStatsCurProbeCount
OBJECT-TYPE
The total count of probe packets in a hop count index.
1.3.6.1.4.1.2011.5.25.111.4.6.1.7Gauge32read-onlycurrent
nqaMtracertStatsRTDOverThresholds
OBJECT-TYPE
The times of successful statistics test RTD (Round Trip Delay) over the threshold.
1.3.6.1.4.1.2011.5.25.111.4.6.1.8Counter32read-onlycurrent
nqaMtracertStatsTimeouts
OBJECT-TYPE
The number of occasions when a NQA operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded.
1.3.6.1.4.1.2011.5.25.111.4.6.1.9Counter32read-onlycurrent
nqaMtracertStatsBusies
OBJECT-TYPE
The times of failure to apply resource due to the busy system. such as apply memory or create socket failure.
1.3.6.1.4.1.2011.5.25.111.4.6.1.10Counter32read-onlycurrent
nqaMtracertStatsSequenceErrors
OBJECT-TYPE
The times that sequence error happends.
1.3.6.1.4.1.2011.5.25.111.4.6.1.11Counter32read-onlycurrent
nqaMtracertStatsDrops
OBJECT-TYPE
The times probes of the test dropped due to sending or connecting failure .
1.3.6.1.4.1.2011.5.25.111.4.6.1.12Counter32read-onlycurrent
nqaMtracertStatsProbeResponses
OBJECT-TYPE
The number of received reponse packets.
1.3.6.1.4.1.2011.5.25.111.4.6.1.13Counter32read-onlycurrent
nqaMtracertStatsSentProbes
OBJECT-TYPE
The number of sent packets.
1.3.6.1.4.1.2011.5.25.111.4.6.1.14Counter32read-onlycurrent
nqaMtracertStatsLastGoodProbe
OBJECT-TYPE
Date and time when the last response was received for a probe.
1.3.6.1.4.1.2011.5.25.111.4.6.1.15DateAndTimeread-onlycurrent
nqaMtracertStatsLastGoodPath
OBJECT-TYPE
The date and time when the last complete path was determined.
1.3.6.1.4.1.2011.5.25.111.4.6.1.16DateAndTimeread-onlycurrent
nqaMtracertStatsTestFinished
OBJECT-TYPE
The status of test execution.
1.3.6.1.4.1.2011.5.25.111.4.6.1.17INTEGER {noFinish(1), finish(2)}read-onlycurrent
nqaMtracertStatsCurPathTTL
OBJECT-TYPE
The TTL(time to live) of the current path.
1.3.6.1.4.1.2011.5.25.111.4.6.1.18Gauge32read-onlycurrent
nqaMtracertStatsMaxPathTTL
OBJECT-TYPE
The maximum TTL(time to live) of the path.
1.3.6.1.4.1.2011.5.25.111.4.6.1.19Gauge32read-onlycurrent
nqaMtracertStatsInPkgLossRate
OBJECT-TYPE
The loss rate of the incoming packets.
1.3.6.1.4.1.2011.5.25.111.4.6.1.20Gauge32read-onlycurrent
nqaMtracertStatsSGPkgLossRate
OBJECT-TYPE
The loss rate of the packets from source to multicast group.
1.3.6.1.4.1.2011.5.25.111.4.6.1.21Gauge32read-onlycurrent
nqaMtracertStatsInPkgRate
OBJECT-TYPE
The rate of incoming packets.
1.3.6.1.4.1.2011.5.25.111.4.6.1.22Gauge32read-onlycurrent
nqaMtracertStatsOutPkgRate
OBJECT-TYPE
The rate of outgoing packets.
1.3.6.1.4.1.2011.5.25.111.4.6.1.23Gauge32read-onlycurrent
nqaMtracertStatsTimeDelay
OBJECT-TYPE
The time delay of packets from hop to hop.
1.3.6.1.4.1.2011.5.25.111.4.6.1.24Gauge32read-onlycurrent
nqaPathMtuStatsTable
OBJECT-TYPE
The statistics collection database. Defines the path MTU Operations Statistics Table for storing the statistics of a path MTU test.
1.3.6.1.4.1.2011.5.25.111.4.7not-accessiblecurrent
nqaPathMtuStatsEntry
OBJECT-TYPE
Defines an entry in the nqaPathMtuStatsTable.
1.3.6.1.4.1.2011.5.25.111.4.7.1not-accessiblecurrent
nqaPathMtuStatsIndex
OBJECT-TYPE
The index of path MTU statistics table, and the times of dispatching dependency tests.
1.3.6.1.4.1.2011.5.25.111.4.7.1.1Integer32 (1..2147483647)not-accessiblecurrent
nqaPathMtuStatsAddressType
OBJECT-TYPE
The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16).
1.3.6.1.4.1.2011.5.25.111.4.7.1.2InetAddressTyperead-onlycurrent
nqaPathMtuStatsAddress
OBJECT-TYPE
The destination address. It is the source address of the ICMP echo reply packet.
1.3.6.1.4.1.2011.5.25.111.4.7.1.3InetAddressread-onlycurrent
nqaPathMtuStatsCompletions
OBJECT-TYPE
The status of test.
1.3.6.1.4.1.2011.5.25.111.4.7.1.4INTEGER {noResult(0), success(1), failure(2)}read-onlycurrent
nqaPathMtuStatsSentProbes
OBJECT-TYPE
The number of sent packets.
1.3.6.1.4.1.2011.5.25.111.4.7.1.5Counter32read-onlycurrent
nqaPathMtuStatsProbeResponses
OBJECT-TYPE
The number of received reponse packets.
1.3.6.1.4.1.2011.5.25.111.4.7.1.6Counter32read-onlycurrent
nqaPathMtuStatsDiscoveryPathMtuMin
OBJECT-TYPE
The initial length of packet in the path MTU test. It is the minimal length of a ICMP packet.
1.3.6.1.4.1.2011.5.25.111.4.7.1.7Gauge32read-onlycurrent
nqaPathMtuStatsDiscoveryPathMtuMax
OBJECT-TYPE
The maximal length of packet in the path MTU test. It is the maximal MTU of local out-interface.
1.3.6.1.4.1.2011.5.25.111.4.7.1.8Gauge32read-onlycurrent
nqaPathMtuStatsOptimumFirstStep
OBJECT-TYPE
The optimum first step of the path MTU test. It will take effect if the specified step is lower than it.
1.3.6.1.4.1.2011.5.25.111.4.7.1.9Gauge32read-onlycurrent
nqaPathMtuStatsBusies
OBJECT-TYPE
The times of failure to apply resource due to the busy system. such as apply memory or create socket failure.
1.3.6.1.4.1.2011.5.25.111.4.7.1.10Counter32read-onlycurrent
nqaPathMtuStatsTimeouts
OBJECT-TYPE
The number of occasions when a NQA operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded.
1.3.6.1.4.1.2011.5.25.111.4.7.1.11Counter32read-onlycurrent
nqaPathMtuStatsDrops
OBJECT-TYPE
The times probes of the test dropped due to sending or connecting failure.
1.3.6.1.4.1.2011.5.25.111.4.7.1.12Counter32read-onlycurrent
nqaPathMtuStatsPathMtu
OBJECT-TYPE
The value of current path MTU.
1.3.6.1.4.1.2011.5.25.111.4.7.1.13Gauge32read-onlycurrent
nqaPathMtuStatsTestFinished
OBJECT-TYPE
The status of test execution.
1.3.6.1.4.1.2011.5.25.111.4.7.1.14INTEGER {nofinish(0), finish(1)}read-onlycurrent
nqaPathJitterStatsTable
OBJECT-TYPE
A table which contains the status of latest path jitter operation.
1.3.6.1.4.1.2011.5.25.111.4.8not-accessiblecurrent
nqaPathJitterStatsEntry
OBJECT-TYPE
A table which contains the status of latest path jitter operation. This entry is created only if the nqaAdminCtrlType is path jitter.
1.3.6.1.4.1.2011.5.25.111.4.8.1not-accessiblecurrent
nqaPathJitterStatsIndex
OBJECT-TYPE
The index of path jitter statistics table, and the times of dispatching dependency tests.
1.3.6.1.4.1.2011.5.25.111.4.8.1.1Integer32 (1..2147483647)not-accessiblecurrent
nqaPathJitterStatsHopIndex
OBJECT-TYPE
The index of path jitter hop.
1.3.6.1.4.1.2011.5.25.111.4.8.1.2Integer32 (1..255)not-accessiblecurrent
nqaPathJitterStatsCompletions
OBJECT-TYPE
The status of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.3INTEGER {noResult(0), success(1), failure(2)}read-onlycurrent
nqaPathJitterStatsAddressType
OBJECT-TYPE
The destination address type in a hop of path jitter test, and the value range can be unknown(0), ipv4(1) and dns(16).
1.3.6.1.4.1.2011.5.25.111.4.8.1.4InetAddressTyperead-onlycurrent
nqaPathJitterStatsAddress
OBJECT-TYPE
The destination address in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.5InetAddressread-onlycurrent
nqaPathJitterStatsRtdOverThresholds
OBJECT-TYPE
The times of successful executions who's RTD over the threshold in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.6Counter32read-onlycurrent
nqaPathJitterStatsNumOfRtt
OBJECT-TYPE
The times that statistics RTT successfully in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.7Counter32read-onlycurrent
nqaPathJitterStatsRttSum
OBJECT-TYPE
The sum of RTTs in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.8Counter32read-onlycurrent
nqaPathJitterStatsRttSum2Low
OBJECT-TYPE
The low order 32 bits of RTT's square sum that successfully measured in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.9Counter32read-onlycurrent
nqaPathJitterStatsRttSum2High
OBJECT-TYPE
The high order 32 bits of RTT's square sum that successfully measured in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.10Counter32read-onlycurrent
nqaPathJitterStatsRttMin
OBJECT-TYPE
The minimum of RTTs that successfully measured in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.11Gauge32read-onlycurrent
nqaPathJitterStatsRttMax
OBJECT-TYPE
The maximum of RTTs that successfully measured in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.12Gauge32read-onlycurrent
nqaPathJitterStatsMinOfPositivesSD
OBJECT-TYPE
The minimum of positive values of jitter that measured from packets sent from source to destination in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.13Gauge32read-onlycurrent
nqaPathJitterStatsMaxOfPositivesSD
OBJECT-TYPE
The maximum of positive values of jitter that measured from packets sent from source to destination in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.14Gauge32read-onlycurrent
nqaPathJitterStatsNumOfPositivesSD
OBJECT-TYPE
The number of positive values of jitter that measured from packets sent from source to destination in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.15Counter32read-onlycurrent
nqaPathJitterStatsSumOfPositivesSD
OBJECT-TYPE
The sum of positive values of jitter that measured from packets sent from source to destination in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.16Counter32read-onlycurrent
nqaPathJitterStatsSum2OfPositivesSDLow
OBJECT-TYPE
The low order 32 bits of square sum of positive values of jitter that measured from packets sent from source to destination in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.17Counter32read-onlycurrent
nqaPathJitterStatsSum2OfPositivesSDHigh
OBJECT-TYPE
The high order 32 bits of square sum of positive values of jitter that measured from packets sent from source to destination in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.18Counter32read-onlycurrent
nqaPathJitterStatsMinOfNegativesSD
OBJECT-TYPE
The minimum of negative values of jitter that measured from packets sent from source to destination in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.19Gauge32read-onlycurrent
nqaPathJitterStatsMaxOfNegativesSD
OBJECT-TYPE
The maximum of negative values of jitter that measured from packets sent from source to destination in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.20Gauge32read-onlycurrent
nqaPathJitterStatsNumOfNegativesSD
OBJECT-TYPE
The number of negative values of jitter that measured from packets sent from source to destination in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.21Counter32read-onlycurrent
nqaPathJitterStatsSumOfNegativesSD
OBJECT-TYPE
The sum of negative values of jitter that measured from packets sent from source to destination in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.22Counter32read-onlycurrent
nqaPathJitterStatsSum2OfNegativesSDLow
OBJECT-TYPE
The low order 32 bits of square sum of negative values of jitter that measured from packets sent from source to destination in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.23Counter32read-onlycurrent
nqaPathJitterStatsSum2OfNegativesSDHigh
OBJECT-TYPE
The high order 32 bits of square sum of negative values of jitter that measured from packets sent from source to destination in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.24Counter32read-onlycurrent
nqaPathJitterStatsMinOfPositivesDS
OBJECT-TYPE
The minimum of positive values of jitter that measured from packets sent from destination to source in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.25Gauge32read-onlycurrent
nqaPathJitterStatsMaxOfPositivesDS
OBJECT-TYPE
The maximum of positive values of jitter that measured from packets sent from destination to source in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.26Gauge32read-onlycurrent
nqaPathJitterStatsNumOfPositivesDS
OBJECT-TYPE
The number of positive values of jitter that measured from packets sent from destination to source in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.27Counter32read-onlycurrent
nqaPathJitterStatsSumOfPositivesDS
OBJECT-TYPE
The sum of positive values of jitter that measured from packets sent from destination to source in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.28Counter32read-onlycurrent
nqaPathJitterStatsSum2OfPositivesDSLow
OBJECT-TYPE
The low order 32 bits of square sum of positive values of jitter that measured from packets sent from destination to source in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.29Counter32read-onlycurrent
nqaPathJitterStatsSum2OfPositivesDSHigh
OBJECT-TYPE
The high order 32 bits of square sum of positive values of jitter that measured from packetssent from destination to source in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.30Counter32read-onlycurrent
nqaPathJitterStatsMinOfNegativesDS
OBJECT-TYPE
The minimum of negative values of jitter that measured from packets sent from destination to source in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.31Gauge32read-onlycurrent
nqaPathJitterStatsMaxOfNegativesDS
OBJECT-TYPE
The maximum of negative values of jitter that measured from packets sent from destination to source in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.32Gauge32read-onlycurrent
nqaPathJitterStatsNumOfNegativesDS
OBJECT-TYPE
The number of negative values of jitter that measured from packets sent from destination to source in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.33Counter32read-onlycurrent
nqaPathJitterStatsSumOfNegativesDS
OBJECT-TYPE
The sum of negative values of jitter that measured from packets sent from destination to source in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.34Counter32read-onlycurrent
nqaPathJitterStatsSum2OfNegativesDSLow
OBJECT-TYPE
The low order 32 bits of square sum of negative values of jitter that measured from packets sent from destination to source in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.35Counter32read-onlycurrent
nqaPathJitterStatsSum2OfNegativesDSHigh
OBJECT-TYPE
The high order 32 bits of square sum of negative values of jitter that measured from packets sent from destination to source in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.36Counter32read-onlycurrent
nqaPathJitterStatsPacketLossSD
OBJECT-TYPE
The number of dropped packets sent from source to destination in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.37Counter32read-onlycurrent
nqaPathJitterStatsPacketLossDS
OBJECT-TYPE
The number of dropped packets sent from destination to source in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.38Counter32read-onlycurrent
nqaPathJitterStatsPacketOutOfSequences
OBJECT-TYPE
The number of packets that return out of sequence.
1.3.6.1.4.1.2011.5.25.111.4.8.1.39Counter32read-onlycurrent
nqaPathJitterStatsErrors
OBJECT-TYPE
The number of some other errors type.
1.3.6.1.4.1.2011.5.25.111.4.8.1.40Counter32read-onlycurrent
nqaPathJitterStatsBusies
OBJECT-TYPE
The number of occasions when a path jitter operation could not be initiated because an internal error.
1.3.6.1.4.1.2011.5.25.111.4.8.1.41Counter32read-onlycurrent
nqaPathJitterStatsTimeouts
OBJECT-TYPE
The number of occasions when a NQA operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded.
1.3.6.1.4.1.2011.5.25.111.4.8.1.42Counter32read-onlycurrent
nqaPathJitterStatsProbeResponses
OBJECT-TYPE
The number of responses received for the corresponding test. The value of this object MUST be reported as 0 when no probe responses have been received.
1.3.6.1.4.1.2011.5.25.111.4.8.1.43Counter32read-onlycurrent
nqaPathJitterStatsSentProbes
OBJECT-TYPE
The value of this object reflects the number of packets sent for the corresponding test. The value of this object MUST be reported as 0 when no probes have been sent.
1.3.6.1.4.1.2011.5.25.111.4.8.1.44Counter32read-onlycurrent
nqaPathJitterStatsDrops
OBJECT-TYPE
The times probes of the test dropped due to sending failure.
1.3.6.1.4.1.2011.5.25.111.4.8.1.45Counter32read-onlycurrent
nqaPathJitterStatsTestFinished
OBJECT-TYPE
The status of test execution.
1.3.6.1.4.1.2011.5.25.111.4.8.1.46INTEGER {noFinish(0), finish(1)}read-onlycurrent
nqaPathJitterStatsMaxDelaySD
OBJECT-TYPE
The maximum of all OWD (One Way Delay) that measured from packets sent from source to destination in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.47Gauge32read-onlycurrent
nqaPathJitterStatsMaxDelayDS
OBJECT-TYPE
The maximum of all OWD (One Way Delay) that measured from packets sent from destination to source in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.48Gauge32read-onlycurrent
nqaPathJitterStatsRttAvg
OBJECT-TYPE
The average of RTTs that were successfully measured in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.49Gauge32read-onlycurrent
nqaPathJitterStatsPacketLossRatio
OBJECT-TYPE
The ratio of the packets lost to all packets sent in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.50Gauge32read-onlycurrent
nqaPathJitterStatsAvgJitter
OBJECT-TYPE
The average of jitter values that were successfully measured in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.51Gauge32read-onlycurrent
nqaPathJitterStatsAvgJitterSD
OBJECT-TYPE
The average value of jitters that measured from packets sent from sourse to destination in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.52Gauge32read-onlycurrent
nqaPathJitterStatsAvgJitterDS
OBJECT-TYPE
The average value of jitters that measured from packets sent from destination to source in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.53Gauge32read-onlycurrent
nqaPathJitterStatsJitterOut
OBJECT-TYPE
jitter (RFC1889) at responder.
1.3.6.1.4.1.2011.5.25.111.4.8.1.54OCTET STRINGread-onlycurrent
nqaPathJitterStatsJitterIn
OBJECT-TYPE
Jitter (RFC1889) at sender.
1.3.6.1.4.1.2011.5.25.111.4.8.1.55OCTET STRINGread-onlycurrent
nqaPathJitterStatsOwdOverThresholdsSD
OBJECT-TYPE
The number of tests that violate OWD (One Way Delay) threshold from source to destination in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.56Counter32read-onlycurrent
nqaPathJitterStatsPktLossUnknown
OBJECT-TYPE
The number of lost packets for which we can't determine the direction in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.57Counter32read-onlycurrent
nqaPathJitterStatsNumOfOwd
OBJECT-TYPE
The number of OWDs that were successfully measured in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.58Counter32read-onlycurrent
nqaPathJitterStatsOwdSumSD
OBJECT-TYPE
The sum of OWDs that were successfully measured from packets sent from source to destination in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.59Counter32read-onlycurrent
nqaPathJitterStatsOwdSumDS
OBJECT-TYPE
The sum of OWDs that were successfully measured from packets sent from destination to source in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.60Counter32read-onlycurrent
nqaPathJitterStatsOwdOverThresholdsDS
OBJECT-TYPE
The number of tests that violate OWD (One Way Delay) threshold from destination to source in a hop of path jitter test.
1.3.6.1.4.1.2011.5.25.111.4.8.1.61Counter32read-onlycurrent
nqaPppoeStatsTable
OBJECT-TYPE
A table which contains the rolling accumulated history of the PPPoE operation.
1.3.6.1.4.1.2011.5.25.111.4.9not-accessiblecurrent
nqaPppoeStatsEntry
OBJECT-TYPE
A table which contains the rolling accumulated history of the PPPoE operation. This entry is created only if the nqaAdminCtrlType is pppoe.
1.3.6.1.4.1.2011.5.25.111.4.9.1not-accessiblecurrent
nqaPppoeStatsIndex
OBJECT-TYPE
The index of PPPoE statistics table, and the executing times of dispatching dependency tests.
1.3.6.1.4.1.2011.5.25.111.4.9.1.1Integer32 (1..2147483647)not-accessiblecurrent
nqaPppoeRedialIndex
OBJECT-TYPE
The index of PPPoE statistics table, and the redialing times of dispatching dependency tests.
1.3.6.1.4.1.2011.5.25.111.4.9.1.2Integer32 (1..2147483647)not-accessiblecurrent
nqaPppoeStatsCompletions
OBJECT-TYPE
The status of PPPoE operation.
1.3.6.1.4.1.2011.5.25.111.4.9.1.3INTEGER {dialupSuccess(1), dialupFail(2), stop(3), exceptionStop(4)}read-onlycurrent
nqaPppoeStatsCurrentPhase
OBJECT-TYPE
The current phase of PPPoE operation.
1.3.6.1.4.1.2011.5.25.111.4.9.1.4INTEGER {discovery(1), lcp(2), authorization(3), ncp(4), online(5), stop(6)}read-onlycurrent
nqaPppoeStatsErrorMessage
OBJECT-TYPE
The error message result of PPPoE operation.
1.3.6.1.4.1.2011.5.25.111.4.9.1.5INTEGER {other(1), timeout(2), paramNegotiateFail(3), userAuthenticationFail(4), peerDownRequest(5), noError(255)}read-onlycurrent
nqaPppoeDiscoveryTimeout
OBJECT-TYPE
The time for discovery of PPPoE operation.
1.3.6.1.4.1.2011.5.25.111.4.9.1.6Gauge32read-onlycurrent
nqaPppoeLcpTimeout
OBJECT-TYPE
The time for lcp negotiate of PPPoE operation.
1.3.6.1.4.1.2011.5.25.111.4.9.1.7Gauge32read-onlycurrent
nqaPppoeAuthorizationTimeout
OBJECT-TYPE
The time for authentication of PPPoE operation.
1.3.6.1.4.1.2011.5.25.111.4.9.1.8Gauge32read-onlycurrent
nqaPppoeNcpTimeout
OBJECT-TYPE
The time for ncp negotiate of PPPoE operation.
1.3.6.1.4.1.2011.5.25.111.4.9.1.9Gauge32read-onlycurrent
nqaPppoeConnectionTime
OBJECT-TYPE
The time for connection of PPPoE operation.
1.3.6.1.4.1.2011.5.25.111.4.9.1.10Gauge32read-onlycurrent
nqaPppoeClientSessionId
OBJECT-TYPE
The client sessionID of PPPoE operation.
1.3.6.1.4.1.2011.5.25.111.4.9.1.11Gauge32read-onlycurrent
nqaPppoeClientIpAddress
OBJECT-TYPE
The client ip address of PPPoE operation.
1.3.6.1.4.1.2011.5.25.111.4.9.1.12InetAddressread-onlycurrent
nqaPppoeGatewayIpAddress
OBJECT-TYPE
The gateway ip address of PPPoE operation.
1.3.6.1.4.1.2011.5.25.111.4.9.1.13InetAddressread-onlycurrent
nqaHistory
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.111.5
nqaHistoryTable
OBJECT-TYPE
Defines the Remote Operations test History Table for storing the results of a test operation.
1.3.6.1.4.1.2011.5.25.111.5.1not-accessiblecurrent
nqaHistoryEntry
OBJECT-TYPE
Defines a table for storing the results of a test operation. Entries in this table are limited by the value of the corresponding nqaAdminParaHistoryRowMax.
1.3.6.1.4.1.2011.5.25.111.5.1.1not-accessiblecurrent
nqaHistoryIndex
OBJECT-TYPE
The history table index and times for dispatching dependency tests.
1.3.6.1.4.1.2011.5.25.111.5.1.1.1Integer32 (1..2147483647)not-accessiblecurrent
nqaHistoryHopIndex
OBJECT-TYPE
The hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1.
1.3.6.1.4.1.2011.5.25.111.5.1.1.2Integer32 (1..255)not-accessiblecurrent
nqaHistoryProbeIndex
OBJECT-TYPE
The probe index of tests.
1.3.6.1.4.1.2011.5.25.111.5.1.1.3Integer32 (1..2147483647)not-accessiblecurrent
nqaHistoryTimeStamp
OBJECT-TYPE
The start time stamp of a probe.
1.3.6.1.4.1.2011.5.25.111.5.1.1.4DateAndTimeread-onlycurrent
nqaHistoryAddressType
OBJECT-TYPE
The address type of history records.
1.3.6.1.4.1.2011.5.25.111.5.1.1.5InetAddressTyperead-onlycurrent
nqaHistoryAddress
OBJECT-TYPE
The destination address of tests. For Traceroute, it is the destination address of each hop.
1.3.6.1.4.1.2011.5.25.111.5.1.1.6InetAddressread-onlycurrent
nqaHistoryCompletionTime
OBJECT-TYPE
The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit a probe.
1.3.6.1.4.1.2011.5.25.111.5.1.1.7Integer32read-onlycurrent
nqaHistoryFinishState
OBJECT-TYPE
The result of a test operation made by a remote host for a particular probe.
1.3.6.1.4.1.2011.5.25.111.5.1.1.8INTEGER {success(1), timeout(2), drop(3), busy(4), overThreshold(5), disconnected(6), noConnected(7)}read-onlycurrent
nqaHistoryLastRC
OBJECT-TYPE
The last implementation method specific reply code received. If the ICMP Echo capability is being used then a successful probe ends when an ICMP response is received that contains the code ICMP_ECHOREPLY(0). The ICMP responses are defined normally in the ip_icmp include file.
1.3.6.1.4.1.2011.5.25.111.5.1.1.9Integer32read-onlycurrent
nqaMpingHistoryTable
OBJECT-TYPE
Defines the Remote Operations Mping test History Table for storing the results of a test operation.
1.3.6.1.4.1.2011.5.25.111.5.2not-accessiblecurrent
nqaMpingHistoryEntry
OBJECT-TYPE
Defines a table for storing the results of a test operation. Entries in this table are limited by the value of the corresponding nqaAdminParaHistoryRowMax.
1.3.6.1.4.1.2011.5.25.111.5.2.1not-accessiblecurrent
nqaMpingHistoryIndex
OBJECT-TYPE
The Mping history table index and times for dispatching dependency tests.
1.3.6.1.4.1.2011.5.25.111.5.2.1.1Integer32 (1..2147483647)not-accessiblecurrent
nqaMpingHistoryReceiverIndex
OBJECT-TYPE
The index of receiver ,that received mping request packets and response reply packets .
1.3.6.1.4.1.2011.5.25.111.5.2.1.2Integer32 (1..2147483647)not-accessiblecurrent
nqaMpingHistoryResponseIndex
OBJECT-TYPE
The index of response packets send by receiver
1.3.6.1.4.1.2011.5.25.111.5.2.1.3Integer32 (1..2147483647)not-accessiblecurrent
nqaMpingHistoryAddressType
OBJECT-TYPE
The address type of history records.
1.3.6.1.4.1.2011.5.25.111.5.2.1.4InetAddressTyperead-onlycurrent
nqaMpingHistoryAddress
OBJECT-TYPE
The destination address of tests.
1.3.6.1.4.1.2011.5.25.111.5.2.1.5InetAddressread-onlycurrent
nqaMpingHistoryReceiverAddress
OBJECT-TYPE
The source address of response package of tests.
1.3.6.1.4.1.2011.5.25.111.5.2.1.6InetAddressread-onlycurrent
nqaMpingHistoryTimeStamp
OBJECT-TYPE
The start time stamp of a probe.
1.3.6.1.4.1.2011.5.25.111.5.2.1.7DateAndTimeread-onlycurrent
nqaMpingHistoryCompletionTime
OBJECT-TYPE
The completion time of a probe in milliseconds.
1.3.6.1.4.1.2011.5.25.111.5.2.1.8Integer32read-onlycurrent
nqaMpingHistoryFinishState
OBJECT-TYPE
The result of a test operation made by a remote host for a particular probe.
1.3.6.1.4.1.2011.5.25.111.5.2.1.9INTEGER {success(1), timeout(2), drop(3), busy(4), overThreshold(5), disconnected(6), noConnected(7)}read-onlycurrent
nqaMpingHistoryLastRC
OBJECT-TYPE
The last reply code received.
1.3.6.1.4.1.2011.5.25.111.5.2.1.10Integer32read-onlycurrent
nqaMpingHistoryFibHit
OBJECT-TYPE
Whether the fib is hit on the device which received the packet.
1.3.6.1.4.1.2011.5.25.111.5.2.1.11TruthValueread-onlycurrent
nqaMtracertHistoryTable
OBJECT-TYPE
Defines the Remote MtracertOperations test History Table for storing the results of a test operation.
1.3.6.1.4.1.2011.5.25.111.5.3not-accessiblecurrent
nqaMtracertHistoryEntry
OBJECT-TYPE
Defines a table for storing the results of a test operation. Entries in this table are limited by the value of the corresponding nqaAdminParaHistoryRowMax.
1.3.6.1.4.1.2011.5.25.111.5.3.1not-accessiblecurrent
nqaMtracertHistoryIndex
OBJECT-TYPE
The Mtracert history table index and times for dispatching dependency tests.
1.3.6.1.4.1.2011.5.25.111.5.3.1.1Integer32 (1..2147483647)not-accessiblecurrent
nqaMtracertHistoryHopIndex
OBJECT-TYPE
The index of Mtracert hop.
1.3.6.1.4.1.2011.5.25.111.5.3.1.2Integer32 (1..255)not-accessiblecurrent
nqaMtracertHistoryAddressType
OBJECT-TYPE
The address type of history records.
1.3.6.1.4.1.2011.5.25.111.5.3.1.3InetAddressTyperead-onlycurrent
nqaMtracertHistoryAddress
OBJECT-TYPE
The destination address of tests. For Traceroute, it is the destination address of each hop.
1.3.6.1.4.1.2011.5.25.111.5.3.1.4InetAddressread-onlycurrent
nqaMtracertHistoryTimeStamp
OBJECT-TYPE
The start time stamp of a probe.
1.3.6.1.4.1.2011.5.25.111.5.3.1.5DateAndTimeread-onlycurrent
nqaMtracertHistoryCompletionTime
OBJECT-TYPE
The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit a probe.
1.3.6.1.4.1.2011.5.25.111.5.3.1.6Integer32read-onlycurrent
nqaMtracertHistoryLastRC
OBJECT-TYPE
The last implementation method specific reply code received. If the ICMP Echo capability is being used then a successful probe ends when an ICMP response is received that contains the code ICMP_ECHOREPLY(0). The ICMP responses are defined normally in the ip_icmp include file.
1.3.6.1.4.1.2011.5.25.111.5.3.1.7Integer32read-onlycurrent
nqaMtracertHistoryCurQueryMode
OBJECT-TYPE
The current query mode.
1.3.6.1.4.1.2011.5.25.111.5.3.1.8INTEGER {maxHops(1), hopByHop(2)}read-onlycurrent
nqaMtracertHistoryQueryArrivalTime
OBJECT-TYPE
The Query Arrival Time is a 32-bit NTP timestamp specifying the arrival time of the traceroute request packet at this router.
1.3.6.1.4.1.2011.5.25.111.5.3.1.9Unsigned32read-onlycurrent
nqaMtracertHistoryIncomingIfAddress
OBJECT-TYPE
This field specifies the address of the interface on which packets from this source and group are expected to arrive, or 0 if unknown.
1.3.6.1.4.1.2011.5.25.111.5.3.1.10InetAddressread-onlycurrent
nqaMtracertHistoryOutgoingIfAddress
OBJECT-TYPE
This field specifies the address of the interface on which packets from this source and group flow to the specified destination, or 0 if unknown.
1.3.6.1.4.1.2011.5.25.111.5.3.1.11InetAddressread-onlycurrent
nqaMtracertHistoryPreHopRouterAddress
OBJECT-TYPE
This field specifies the router from which this router expects packets from this source.
1.3.6.1.4.1.2011.5.25.111.5.3.1.12InetAddressread-onlycurrent
nqaMtracertHistoryInputPacketCount
OBJECT-TYPE
This field contains the number of multicast packets received for all groups and sources on the incoming interface, or 0xffffffff if no count can be reported. This counter should have the same value as ifInMulticastPkts from the IF-MIB for this interface.
1.3.6.1.4.1.2011.5.25.111.5.3.1.13Gauge32read-onlycurrent
nqaMtracertHistoryOutputPacketCount
OBJECT-TYPE
This field contains the number of multicast packets that have been transmitted or queued for transmission for all groups and sources on the outgoing interface, or 0xffffffff if no count can be reported. This counter should have the same value as ifOutMulti-castPkts from the IF-MIB for this interface.
1.3.6.1.4.1.2011.5.25.111.5.3.1.14Gauge32read-onlycurrent
nqaMtracertHistoryTotalSGPacketCount
OBJECT-TYPE
This field counts the number of packets from the specified source forwarded by this router to the specified group, or 0xffffffff if no count can be reported. This counter should have the same value as ipMRoutePkts from the IPMROUTE-STD-MIB for this forwarding entry.
1.3.6.1.4.1.2011.5.25.111.5.3.1.15Gauge32read-onlycurrent
nqaMtracertHistoryRtgProtocol
OBJECT-TYPE
This field describes the routing protocol in use between this router and the previous-hop router.
1.3.6.1.4.1.2011.5.25.111.5.3.1.16INTEGER {dvmrp(1), mospf(2), pim(3), cbt(4), pimUsingSpecRteTab(5), pimUsingStaticRte(6), dvmrpUsingStaticRte(7), pimUsingMBGPRte(8), cbtUsingSpecRteTab(9), cbtUsingStaticRte(10), pimUsingState(11), unknownProtocol(255)}read-onlycurrent
nqaMtracertHistoryFwdTTL
OBJECT-TYPE
This field contains the TTL that a packet is required to have before it will be forwarded over the outgoing interface.
1.3.6.1.4.1.2011.5.25.111.5.3.1.17Gauge32read-onlycurrent
nqaMtracertHistoryFwdCode
OBJECT-TYPE
This field contains a forwarding information/error code. noError(1): No error wrongIf(2): Traceroute request arrived on an interface to which this router would not forward for this source,group,destination. pruneSent(3): This router has sent a prune upstream which applies to the source and group in the tracer- oute request. pruneRCVD(4): This router has stopped forwarding for this source and group in response to a request from the next hop router. scoped(5): The group is subject to administrative scoping at this hop. noRoute(6): This router has no route for the source or group and no way to determine a potential route. wrongLastHop(7): This router is not the proper last-hop router. notForwarding(8):This router is not forwarding this source,group out the outgoing interface for an unspecified reason. reachedRP(9): Reached Rendez-vous Point or Core rpfIf(10): Traceroute request arrived on the expected RPF interface for this source,group. noMulticast(11): Traceroute request arrived on an interface which is not enabled for multicast. infoHidden(12): One or more hops have been hidden from this trace. noSpace(13): There was not enough room to insert another response data block in the packet. oldRouter(14): The previous hop router does not understand traceroute requests. adminProhib(15): Traceroute is administratively prohibited.
1.3.6.1.4.1.2011.5.25.111.5.3.1.18INTEGER {noError(1), wrongIf(2), pruneSent(3), pruneRCVD(4), scoped(5), noRoute(6), wrongLastHop(7), notForwarding(8), reachedRP(9), noMulticast(11), infoHidden(12), noSpace(130), oldRouter(131), adminProhib(132), unknownError(255)}read-onlycurrent
nqaMtracertHistroyFinishState
OBJECT-TYPE
The finish state of a probe.
1.3.6.1.4.1.2011.5.25.111.5.3.1.19INTEGER {success(1), timeout(2), busy(3), drop(4), overThreshold(5), disconnected(6), noConnected(7)}read-onlycurrent
nqaVplsMacTracertHistoryTable
OBJECT-TYPE
Defines the VPLS mac trace Operations test History Table for storing the results of a test operation.
1.3.6.1.4.1.2011.5.25.111.5.4not-accessiblecurrent
nqaVplsMacTracertHistoryEntry
OBJECT-TYPE
Defines a table for storing the results of a test operation. Entries in this table are limited by the value of the corresponding nqaAdminParaHistoryRowMax.
1.3.6.1.4.1.2011.5.25.111.5.4.1not-accessiblecurrent
nqaVplsMacTracertHistoryIndex
OBJECT-TYPE
The VPLS mac trace history table index and times for dispatching dependency tests.
1.3.6.1.4.1.2011.5.25.111.5.4.1.1Integer32 (1..2147483647)not-accessiblecurrent
nqaVplsMacTracertHistoryHopIndex
OBJECT-TYPE
The index of VPLS mac trace hop.
1.3.6.1.4.1.2011.5.25.111.5.4.1.2Integer32 (1..255)not-accessiblecurrent
nqaVplsMacTracertHistoryResponseIndex
OBJECT-TYPE
The index of VPLS mac trace reply packet per hop.
1.3.6.1.4.1.2011.5.25.111.5.4.1.3Integer32 (1..255)not-accessiblecurrent
nqaVplsMacTracertHistoryTimeStamp
OBJECT-TYPE
The start time stamp of a probe.
1.3.6.1.4.1.2011.5.25.111.5.4.1.4DateAndTimeread-onlycurrent
nqaVplsMacTracertHistoryAddressType
OBJECT-TYPE
The address type of history records.
1.3.6.1.4.1.2011.5.25.111.5.4.1.5InetAddressTyperead-onlycurrent
nqaVplsMacTracertHistoryAddress
OBJECT-TYPE
The destination address of tests. For Traceroute, it is the destination address of each hop.
1.3.6.1.4.1.2011.5.25.111.5.4.1.6InetAddressread-onlycurrent
nqaVplsMacTracertHistoryCompletionTime
OBJECT-TYPE
The completion time of a probe in milliseconds. The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit a probe.
1.3.6.1.4.1.2011.5.25.111.5.4.1.7Integer32read-onlycurrent
nqaVplsMacTracertHistoryFinishState
OBJECT-TYPE
The finish state of a probe.
1.3.6.1.4.1.2011.5.25.111.5.4.1.8INTEGER {success(1), timeout(2), drop(3), busy(4), overThreshold(5), disconnected(6), noConnected(7)}read-onlycurrent
nqaVplsMacTracertHistoryHitFlag
OBJECT-TYPE
Hit Flag.
1.3.6.1.4.1.2011.5.25.111.5.4.1.9TruthValueread-onlycurrent
nqaVplsMacTracertHistoryDSCount
OBJECT-TYPE
The count of Downstreams.
1.3.6.1.4.1.2011.5.25.111.5.4.1.10Integer32 (0..2147483647)read-onlycurrent
nqaVplsMacTracertHistorySuccessPathNode
OBJECT-TYPE
This object indicates whether it is a node along the path that passes the Trace test. By default, the value is false, indicating that the object is not a node along the path that passes the Trace test.
1.3.6.1.4.1.2011.5.25.111.5.4.1.11TruthValueread-onlycurrent
nqaVplsMacTracertHistoryDSTable
OBJECT-TYPE
Defines the VPLS mac trace Operations test History Downstreanm Table for storing the results of a test operation.
1.3.6.1.4.1.2011.5.25.111.5.5not-accessiblecurrent
nqaVplsMacTracertHistoryDSEntry
OBJECT-TYPE
Defines a table for storing the results of a test operation. Entries in this table are limited by the value of the corresponding nqaAdminParaHistoryRowMax.
1.3.6.1.4.1.2011.5.25.111.5.5.1not-accessiblecurrent
nqaVplsMacTracertHistoryDSIndex
OBJECT-TYPE
The VPLS mac trace history DS table index.
1.3.6.1.4.1.2011.5.25.111.5.5.1.1Integer32 (1..2147483647)not-accessiblecurrent
nqaVplsMacTracertHistoryDSAddress
OBJECT-TYPE
DS address.
1.3.6.1.4.1.2011.5.25.111.5.5.1.2InetAddressread-onlycurrent
nqaVplsMTraceHistoryTable
OBJECT-TYPE
Defines the remote vpls multicast trace operations test history table for storing the results of a test operation.
1.3.6.1.4.1.2011.5.25.111.5.6not-accessiblecurrent
nqaVplsMTraceHistoryEntry
OBJECT-TYPE
Defines a table for storing the results of a test operation. Entries in this table are limited by the value of the corresponding nqaAdminParaHistoryRowMax.
1.3.6.1.4.1.2011.5.25.111.5.6.1not-accessiblecurrent
nqaVplsMTraceHistoryIndex
OBJECT-TYPE
The vpls multicast trace history table index and times for dispatching dependency tests.
1.3.6.1.4.1.2011.5.25.111.5.6.1.1Integer32 (1..2147483647)not-accessiblecurrent
nqaVplsMTraceHistoryHopIndex
OBJECT-TYPE
The index of vpls multicast trace hop.
1.3.6.1.4.1.2011.5.25.111.5.6.1.2Integer32 (1..255)not-accessiblecurrent
nqaVplsMTraceHistoryResponseIndex
OBJECT-TYPE
The index of vpls multicast trace responser.
1.3.6.1.4.1.2011.5.25.111.5.6.1.3Integer32 (1..2147483647)not-accessiblecurrent
nqaVplsMTraceHistoryResponserAddressType
OBJECT-TYPE
The type of history record's Responser address.
1.3.6.1.4.1.2011.5.25.111.5.6.1.4InetAddressTyperead-onlycurrent
nqaVplsMTraceHistoryResponserAddress
OBJECT-TYPE
The Responser address of tests.
1.3.6.1.4.1.2011.5.25.111.5.6.1.5InetAddressread-onlycurrent
nqaVplsMTraceHistoryUpStreamAddressType
OBJECT-TYPE
The type of history records' last hop address.
1.3.6.1.4.1.2011.5.25.111.5.6.1.6InetAddressTyperead-onlycurrent
nqaVplsMTraceHistoryUpStreamAddress
OBJECT-TYPE
The last hop address of tests.
1.3.6.1.4.1.2011.5.25.111.5.6.1.7InetAddressread-onlycurrent
nqaVplsMTraceHistoryReceivedTtl
OBJECT-TYPE
The value of ttl in the received packet.
1.3.6.1.4.1.2011.5.25.111.5.6.1.8Unsigned32 (1..255)read-onlycurrent
nqaVplsMTraceHistoryIGMPVersion
OBJECT-TYPE
The IGMP protocol version.
1.3.6.1.4.1.2011.5.25.111.5.6.1.9INTEGER {igmpv1(1), igmpv2(2), igmpv3(3)}read-onlycurrent
nqaVplsMTraceHistoryIGMPSnpgEnable
OBJECT-TYPE
The IGMP snooping enable state.
1.3.6.1.4.1.2011.5.25.111.5.6.1.10EnableValueread-onlycurrent
nqaVplsMTraceHistoryIGMPProxyEnable
OBJECT-TYPE
The IGMP proxy enable switch.
1.3.6.1.4.1.2011.5.25.111.5.6.1.11EnableValueread-onlycurrent
nqaVplsMTraceHistoryIGMPRouterPortLearningEnable
OBJECT-TYPE
The IGMP router port learning enable switch.
1.3.6.1.4.1.2011.5.25.111.5.6.1.12EnableValueread-onlycurrent
nqaVplsMTraceHistoryRequireRouterAlertEnable
OBJECT-TYPE
The route alert requirement enable switch.
1.3.6.1.4.1.2011.5.25.111.5.6.1.13EnableValueread-onlycurrent
nqaVplsMTraceHistoryForwardMode
OBJECT-TYPE
The forward mode value.
1.3.6.1.4.1.2011.5.25.111.5.6.1.14INTEGER {mac(1), ip(2)}read-onlycurrent
nqaVplsMTraceHistoryHitFlag
OBJECT-TYPE
Whether the fib is hit on the device which received the packet.
1.3.6.1.4.1.2011.5.25.111.5.6.1.15TruthValueread-onlycurrent
nqaVplsMTraceHistoryPWExist
OBJECT-TYPE
Whether the forward PW is exist.
1.3.6.1.4.1.2011.5.25.111.5.6.1.16TruthValueread-onlycurrent
nqaVplsMTraceHistoryGroupPolicy
OBJECT-TYPE
The ACL judge result.
1.3.6.1.4.1.2011.5.25.111.5.6.1.17INTEGER {permit(1), deny(2)}read-onlycurrent
nqaVplsMTraceHistoryCACExist
OBJECT-TYPE
Whether the connection admission control comfiguration of current VSI is exist.
1.3.6.1.4.1.2011.5.25.111.5.6.1.18INTEGER {yes(1), no(2)}read-onlycurrent
nqaVplsMTraceHistoryRcvQueryCount
OBJECT-TYPE
The received query packet number for current IGMP version of current VSI.
1.3.6.1.4.1.2011.5.25.111.5.6.1.19Gauge32read-onlycurrent
nqaVplsMTraceHistoryRcvReportCount
OBJECT-TYPE
The received report packet number for current IGMP version of current VSI.
1.3.6.1.4.1.2011.5.25.111.5.6.1.20Gauge32read-onlycurrent
nqaVplsMTraceHistoryRcvLeaveCount
OBJECT-TYPE
The received leave packet number for current IGMP version of current VSI.
1.3.6.1.4.1.2011.5.25.111.5.6.1.21Gauge32read-onlycurrent
nqaVplsMTraceHistoryTimeStamp
OBJECT-TYPE
The start time stamp of a probe.
1.3.6.1.4.1.2011.5.25.111.5.6.1.22DateAndTimeread-onlycurrent
nqaVplsMTraceHistoryCompletionTime
OBJECT-TYPE
The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit a probe.
1.3.6.1.4.1.2011.5.25.111.5.6.1.23Integer32read-onlycurrent
nqaVplsMTraceHistoryLastRC
OBJECT-TYPE
The last implementation method specific reply code received.
1.3.6.1.4.1.2011.5.25.111.5.6.1.24Integer32read-onlycurrent
nqaVplsMTraceHistoryLastRSC
OBJECT-TYPE
The last implementation method specific reply sub code received.
1.3.6.1.4.1.2011.5.25.111.5.6.1.25Integer32read-onlycurrent
nqaVplsMTraceHistoryFinishState
OBJECT-TYPE
The finish state of a probe.
1.3.6.1.4.1.2011.5.25.111.5.6.1.26INTEGER {success(1), timeout(2), drop(3), busy(4), overThreshold(5), disconnected(6), noConnected(7)}read-onlycurrent
nqaVplsMTraceHistorySuccessPathNode
OBJECT-TYPE
Whether the response router is on the path of a probe. The default value is notonPath(2).
1.3.6.1.4.1.2011.5.25.111.5.6.1.27INTEGER {onPath(1), notonPath(2)}read-onlycurrent
nqaMacTraceHistoryTable
OBJECT-TYPE
This object defines a list of historical MAC trace test instances for storing the running results of test instances.
1.3.6.1.4.1.2011.5.25.111.5.7not-accessiblecurrent
nqaMacTraceHistoryEntry
OBJECT-TYPE
This object defines a table for storing the running results of test instances. The number of entries in this table is limited by the value of nqaAdminParaHistoryRowMax.
1.3.6.1.4.1.2011.5.25.111.5.7.1not-accessiblecurrent
nqaMacTraceHistoryIndex
OBJECT-TYPE
The object indicates the index of the MAC tract history table and the number of times for dispatching dependency tests.
1.3.6.1.4.1.2011.5.25.111.5.7.1.1Integer32 (1..2147483647)not-accessiblecurrent
nqaMacTraceHistoryReceiveOrder
OBJECT-TYPE
This object indicates the sequence in which LTRs are received.
1.3.6.1.4.1.2011.5.25.111.5.7.1.2Integer32 (1..2147483647)not-accessiblecurrent
nqaMacTraceHistoryTTL
OBJECT-TYPE
This object indicates the TTL of the LTR.
1.3.6.1.4.1.2011.5.25.111.5.7.1.3Integer32 (1..255)read-onlycurrent
nqaMacTraceHistorySeqNumber
OBJECT-TYPE
This object indicates the sequence number of the LTR.
1.3.6.1.4.1.2011.5.25.111.5.7.1.4Unsigned32read-onlycurrent
nqaMacTraceHistoryCompletionTime
OBJECT-TYPE
This object indicates the RTT (ms) of the response packet.
1.3.6.1.4.1.2011.5.25.111.5.7.1.5Integer32read-onlycurrent
nqaMacTraceHistoryForwarded
OBJECT-TYPE
This object indicates whether the device that sends LTRs continues to forward LTMs.
1.3.6.1.4.1.2011.5.25.111.5.7.1.6TruthValueread-onlycurrent
nqaMacTraceHistoryTerminalMep
OBJECT-TYPE
This object indicates whether the LTR is sent by an MEP.
1.3.6.1.4.1.2011.5.25.111.5.7.1.7TruthValueread-onlycurrent
nqaMacTraceHistoryRelayAction
OBJECT-TYPE
This object indicates the value of the Relay Action field in the LTR.
1.3.6.1.4.1.2011.5.25.111.5.7.1.8HWDot1agCfmRelayActionFieldValueread-onlycurrent
nqaMacTraceHistoryIngressAction
OBJECT-TYPE
This object indicates the value of the Ingress Action field in the LTR.
1.3.6.1.4.1.2011.5.25.111.5.7.1.9HWDot1agCfmIngressActionFieldValueread-onlycurrent
nqaMacTraceHistoryIngressMac
OBJECT-TYPE
This object indicates the physical MAC address carried in the ingress MAC address field in the LTR.
1.3.6.1.4.1.2011.5.25.111.5.7.1.10MacAddressread-onlycurrent
nqaMacTraceHistoryIngressIfName
OBJECT-TYPE
This object indicates the name of the inbound interface of the LTR.
1.3.6.1.4.1.2011.5.25.111.5.7.1.11OCTET STRINGread-onlycurrent
nqaMacTraceHistoryEgressAction
OBJECT-TYPE
This object indicates the value of the Egress Action field in the LTR.
1.3.6.1.4.1.2011.5.25.111.5.7.1.12HWDot1agCfmEgressActionFieldValueread-onlycurrent
nqaMacTraceHistoryEgressMac
OBJECT-TYPE
This object indicates the MAC address in the Egress MAC address field of the LTR.
1.3.6.1.4.1.2011.5.25.111.5.7.1.13MacAddressread-onlycurrent
nqaMacTraceHistoryEgressIfName
OBJECT-TYPE
This object indicates the name of the interface that forwards the LTR.
1.3.6.1.4.1.2011.5.25.111.5.7.1.14OCTET STRINGread-onlycurrent
nqaNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.111.6
nqaConformance
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.111.7
nqaGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.111.7.1
nqaCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.111.7.2
nqaCollectStats
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.111.8
nqaJitterCollectStatsTable
OBJECT-TYPE
A table which contains the rolling accumulated history of the Jitter operation.
1.3.6.1.4.1.2011.5.25.111.8.1not-accessiblecurrent
nqaJitterCollectStatsEntry
OBJECT-TYPE
A table which contains the rolling accumulated history of the Jitter operation. This entry is created only if the nqaAdminCtrlType is jitterAppl.
1.3.6.1.4.1.2011.5.25.111.8.1.1not-accessiblecurrent
nqaJitterCollectStatsIndex
OBJECT-TYPE
The third index of jitter collection statistics table.
1.3.6.1.4.1.2011.5.25.111.8.1.1.1Integer32 (1..2147483647)not-accessiblecurrent
nqaJitterCollectStatsCompletions
OBJECT-TYPE
The number of the tests that have completed successfully.
1.3.6.1.4.1.2011.5.25.111.8.1.1.2Counter32read-onlycurrent
nqaJitterCollectStatsRTDOverThresholds
OBJECT-TYPE
The number of tests that violate RTD (Round Trip Delay) threshold.
1.3.6.1.4.1.2011.5.25.111.8.1.1.3Counter32read-onlycurrent
nqaJitterCollectStatsOWDOverThresholdsSD
OBJECT-TYPE
The number of tests that violate OWD (One Way Delay) threshold from source to destination.
1.3.6.1.4.1.2011.5.25.111.8.1.1.4Counter32read-onlycurrent
nqaJitterCollectStatsOWDOverThresholdsDS
OBJECT-TYPE
The number of tests that violate OWD (One Way Delay) threshold from destination to source.
1.3.6.1.4.1.2011.5.25.111.8.1.1.5Counter32read-onlycurrent
nqaJitterCollectStatsNumOfRTT
OBJECT-TYPE
The number of RTTs that are successfully measured by tests.
1.3.6.1.4.1.2011.5.25.111.8.1.1.6Counter32read-onlycurrent
nqaJitterCollectStatsRTTSum
OBJECT-TYPE
The sum of RTTs that are successfully measured.
1.3.6.1.4.1.2011.5.25.111.8.1.1.7Counter32read-onlycurrent
nqaJitterCollectStatsRTTSum2Low
OBJECT-TYPE
The sum of squares of RTTs that are successfully measured by tests (low order 32 bits).
1.3.6.1.4.1.2011.5.25.111.8.1.1.8Counter32read-onlycurrent
nqaJitterCollectStatsRTTSum2High
OBJECT-TYPE
The sum of squares of RTTs that are successfully measured by tests (high order 32 bits).
1.3.6.1.4.1.2011.5.25.111.8.1.1.9Counter32read-onlycurrent
nqaJitterCollectStatsRTTMin
OBJECT-TYPE
The minimum of RTTs that were successfully measured by tests.
1.3.6.1.4.1.2011.5.25.111.8.1.1.10Gauge32read-onlycurrent
nqaJitterCollectStatsRTTMax
OBJECT-TYPE
The maximum of RTTs that were successfully measured by tests.
1.3.6.1.4.1.2011.5.25.111.8.1.1.11Gauge32read-onlycurrent
nqaJitterCollectStatsMinOfPositivesSD
OBJECT-TYPE
The minimum of absolute value of all positive jitter values from source to destination.
1.3.6.1.4.1.2011.5.25.111.8.1.1.12Gauge32read-onlycurrent
nqaJitterCollectStatsMaxOfPositivesSD
OBJECT-TYPE
The maximum of absolute value of all positive jitter values from source to destination.
1.3.6.1.4.1.2011.5.25.111.8.1.1.13Gauge32read-onlycurrent
nqaJitterCollectStatsNumOfPositivesSD
OBJECT-TYPE
The number of all positive jitter values from source to destination.
1.3.6.1.4.1.2011.5.25.111.8.1.1.14Counter32read-onlycurrent
nqaJitterCollectStatsSumOfPositivesSD
OBJECT-TYPE
The sum of absolute value of all positive jitter values from source to destination.
1.3.6.1.4.1.2011.5.25.111.8.1.1.15Counter32read-onlycurrent
nqaJitterCollectStatsSum2OfPositivesSDLow
OBJECT-TYPE
The sum of squares of absolute value of all positive jitter values from source to destination (low order 32 bits).
1.3.6.1.4.1.2011.5.25.111.8.1.1.16Counter32read-onlycurrent
nqaJitterCollectStatsSum2OfPositivesSDHigh
OBJECT-TYPE
The sum of squares of absolute value of all positive jitter values from source to destination (high order 32 bits).
1.3.6.1.4.1.2011.5.25.111.8.1.1.17Counter32read-onlycurrent
nqaJitterCollectStatsMinOfNegativesSD
OBJECT-TYPE
The minimum of absolute value of all negative jitter values from source to destination.
1.3.6.1.4.1.2011.5.25.111.8.1.1.18Gauge32read-onlycurrent
nqaJitterCollectStatsMaxOfNegativesSD
OBJECT-TYPE
The maximum of absolute value of all negative jitter values from source to destination.
1.3.6.1.4.1.2011.5.25.111.8.1.1.19Gauge32read-onlycurrent
nqaJitterCollectStatsNumOfNegativesSD
OBJECT-TYPE
The number of all negative jitter values from source to destination.
1.3.6.1.4.1.2011.5.25.111.8.1.1.20Counter32read-onlycurrent
nqaJitterCollectStatsSumOfNegativesSD
OBJECT-TYPE
The sum of absolute value of all negative jitter values from source to destination.
1.3.6.1.4.1.2011.5.25.111.8.1.1.21Counter32read-onlycurrent
nqaJitterCollectStatsSum2OfNegativesSDLow
OBJECT-TYPE
The sum of squares of absolute value of all negative values from source to destination (low order 32 bits).
1.3.6.1.4.1.2011.5.25.111.8.1.1.22Counter32read-onlycurrent
nqaJitterCollectStatsSum2OfNegativesSDHigh
OBJECT-TYPE
The sum of squares of absolute value of all negative values from source to destination (high order 32 bits).
1.3.6.1.4.1.2011.5.25.111.8.1.1.23Counter32read-onlycurrent
nqaJitterCollectStatsMinOfPositivesDS
OBJECT-TYPE
The minimum of absolute value of all positive jitter values from destination to source.
1.3.6.1.4.1.2011.5.25.111.8.1.1.24Gauge32read-onlycurrent
nqaJitterCollectStatsMaxOfPositivesDS
OBJECT-TYPE
The maximum of absolute value of all positive jitter values from destination to source.
1.3.6.1.4.1.2011.5.25.111.8.1.1.25Gauge32read-onlycurrent
nqaJitterCollectStatsNumOfPositivesDS
OBJECT-TYPE
The number of all positive jitter values from destination to source.
1.3.6.1.4.1.2011.5.25.111.8.1.1.26Counter32read-onlycurrent
nqaJitterCollectStatsSumOfPositivesDS
OBJECT-TYPE
The sum of absolute value of all positive jitter values from destination to source.
1.3.6.1.4.1.2011.5.25.111.8.1.1.27Counter32read-onlycurrent
nqaJitterCollectStatsSum2OfPositivesDSLow
OBJECT-TYPE
The sum of squares of absolute value of all positive jitter values from destination to source (low order 32 bits).
1.3.6.1.4.1.2011.5.25.111.8.1.1.28Counter32read-onlycurrent
nqaJitterCollectStatsSum2OfPositivesDSHigh
OBJECT-TYPE
The sum of squares of absolute value of all positive jitter values from destination to source (high order 32 bits).
1.3.6.1.4.1.2011.5.25.111.8.1.1.29Counter32read-onlycurrent
nqaJitterCollectStatsMinOfNegativesDS
OBJECT-TYPE
The minimum of absolute value of all negative jitter values from destination to source.
1.3.6.1.4.1.2011.5.25.111.8.1.1.30Gauge32read-onlycurrent
nqaJitterCollectStatsMaxOfNegativesDS
OBJECT-TYPE
The maximum of absolute value of all negative jitter values from destination to source.
1.3.6.1.4.1.2011.5.25.111.8.1.1.31Gauge32read-onlycurrent
nqaJitterCollectStatsNumOfNegativesDS
OBJECT-TYPE
The number of all negative jitter values from destination to source.
1.3.6.1.4.1.2011.5.25.111.8.1.1.32Counter32read-onlycurrent
nqaJitterCollectStatsSumOfNegativesDS
OBJECT-TYPE
The sum of absolute value of all negative jitter values from destination to source.
1.3.6.1.4.1.2011.5.25.111.8.1.1.33Counter32read-onlycurrent
nqaJitterCollectStatsSum2OfNegativesDSLow
OBJECT-TYPE
The sum of squares of absolute value of all negative values from destination to source (low order 32 bits).
1.3.6.1.4.1.2011.5.25.111.8.1.1.34Counter32read-onlycurrent
nqaJitterCollectStatsSum2OfNegativesDSHigh
OBJECT-TYPE
The sum of squares of absolute value of all negative values from destination to source (high order 32 bits).
1.3.6.1.4.1.2011.5.25.111.8.1.1.35Counter32read-onlycurrent
nqaJitterCollectStatsMaxDelaySD
OBJECT-TYPE
The maximum of all OWD (One Way Delay) from source to destination.
1.3.6.1.4.1.2011.5.25.111.8.1.1.36Gauge32read-onlycurrent
nqaJitterCollectStatsMaxDelayDS
OBJECT-TYPE
The maximum of all OWD (One Way Delay) from destination to source.
1.3.6.1.4.1.2011.5.25.111.8.1.1.37Gauge32read-onlycurrent
nqaJitterCollectStatsNumOfOWD
OBJECT-TYPE
The number of OWDs that were successfully measured by tests.
1.3.6.1.4.1.2011.5.25.111.8.1.1.38Counter32read-onlycurrent
nqaJitterCollectStatsOWSumSD
OBJECT-TYPE
The sum of OWDs that were successfully measured by tests from source to destination.
1.3.6.1.4.1.2011.5.25.111.8.1.1.39Counter32read-onlycurrent
nqaJitterCollectStatsOWSumDS
OBJECT-TYPE
The sum of OWDs that were successfully measured by tests from destination to source.
1.3.6.1.4.1.2011.5.25.111.8.1.1.40Counter32read-onlycurrent
nqaJitterCollectStatsPacketLossSD
OBJECT-TYPE
The number of packets lost when sent from source to destination.
1.3.6.1.4.1.2011.5.25.111.8.1.1.41Counter32read-onlycurrent
nqaJitterCollectStatsPacketLossDS
OBJECT-TYPE
The number of packets lost when sent from destination to source.
1.3.6.1.4.1.2011.5.25.111.8.1.1.42Counter32read-onlycurrent
nqaJitterCollectStatsPacketLossUnknown
OBJECT-TYPE
The number of packets lost for which we can't determine the direction.
1.3.6.1.4.1.2011.5.25.111.8.1.1.43Counter32read-onlycurrent
nqaJitterCollectStatsPacketOutOfSequences
OBJECT-TYPE
The number of packets arrived out of sequence.
1.3.6.1.4.1.2011.5.25.111.8.1.1.44Counter32read-onlycurrent
nqaJitterCollectStatsPacketLossRatio
OBJECT-TYPE
The ratio of the packets lost to all packets sent in the test.
1.3.6.1.4.1.2011.5.25.111.8.1.1.45Gauge32read-onlycurrent
nqaJitterCollectStatsErrors
OBJECT-TYPE
The number of errors occurred in the test.
1.3.6.1.4.1.2011.5.25.111.8.1.1.46Counter32read-onlycurrent
nqaJitterCollectStatsBusies
OBJECT-TYPE
The number of occasions when a test couldn't be initialized because the previous test has not completed.
1.3.6.1.4.1.2011.5.25.111.8.1.1.47Counter32read-onlycurrent
nqaJitterCollectStatsTimeouts
OBJECT-TYPE
The number of responses arrived over the time.
1.3.6.1.4.1.2011.5.25.111.8.1.1.48Counter32read-onlycurrent
nqaJitterCollectStatsProbeResponses
OBJECT-TYPE
The number of responses from echo-server for the packets sent by the test.
1.3.6.1.4.1.2011.5.25.111.8.1.1.49Counter32read-onlycurrent
nqaJitterCollectStatsSentProbes
OBJECT-TYPE
The number of packets sent in the test.
1.3.6.1.4.1.2011.5.25.111.8.1.1.50Counter32read-onlycurrent
nqaJitterCollectStatsDrops
OBJECT-TYPE
The number of packets that were sent failed in the test.
1.3.6.1.4.1.2011.5.25.111.8.1.1.51Counter32read-onlycurrent
nqaJitterCollectStatsRTTAvg
OBJECT-TYPE
The average of RTTs that were successfully measured by tests.
1.3.6.1.4.1.2011.5.25.111.8.1.1.52Gauge32read-onlycurrent
nqaJitterCollectStatsAvgJitter
OBJECT-TYPE
The average of jitter values that were successfully measured by tests.
1.3.6.1.4.1.2011.5.25.111.8.1.1.53Gauge32read-onlycurrent
nqaJitterCollectStatsAvgJitterSD
OBJECT-TYPE
The average of jitter values from source to destination that were successfully measured by tests.
1.3.6.1.4.1.2011.5.25.111.8.1.1.54Gauge32read-onlycurrent
nqaJitterCollectStatsAvgJitterDS
OBJECT-TYPE
The average of jitter values from destination to source that were successfully measured by tests.
1.3.6.1.4.1.2011.5.25.111.8.1.1.55Gauge32read-onlycurrent
nqaJitterCollectStatsJitterOut
OBJECT-TYPE
Jitter (RFC1889) at responder.
1.3.6.1.4.1.2011.5.25.111.8.1.1.56OCTET STRINGread-onlycurrent
nqaJitterCollectStatsJitterIn
OBJECT-TYPE
Jitter (RFC1889) at sender.
1.3.6.1.4.1.2011.5.25.111.8.1.1.57OCTET STRINGread-onlycurrent
nqaJitterCollectStatsMinDelaySD
OBJECT-TYPE
The minimum of all OWD (One Way Delay) from source to destination.
1.3.6.1.4.1.2011.5.25.111.8.1.1.58Gauge32read-onlycurrent
nqaJitterCollectStatsMinDelayDS
OBJECT-TYPE
The minimum of all OWD (One Way Delay) from destination to source.
1.3.6.1.4.1.2011.5.25.111.8.1.1.59Gauge32read-onlycurrent
nqaJitterCollectStatsAvgDelaySD
OBJECT-TYPE
The average of all OWD (One Way Delay) from source to destination.
1.3.6.1.4.1.2011.5.25.111.8.1.1.60Gauge32read-onlycurrent
nqaJitterCollectStatsAvgDelayDS
OBJECT-TYPE
The average of all OWD (One Way Delay) from destination to source.
1.3.6.1.4.1.2011.5.25.111.8.1.1.61Gauge32read-onlycurrent
nqaJitterCollectStatsPktRewriteNum
OBJECT-TYPE
The number of all the packets have been rewrited.
1.3.6.1.4.1.2011.5.25.111.8.1.1.62Counter32read-onlycurrent
nqaJitterCollectStatsPktRewriteRatio
OBJECT-TYPE
The ratio of all the packets have been rewrited.
1.3.6.1.4.1.2011.5.25.111.8.1.1.63Gauge32read-onlycurrent
nqaJitterCollectStatsPktDisorderNum
OBJECT-TYPE
The number of all the packets have been disordered.
1.3.6.1.4.1.2011.5.25.111.8.1.1.64Counter32read-onlycurrent
nqaJitterCollectStatsPktDisorderRatio
OBJECT-TYPE
The ratio of all the packets have been disordered.
1.3.6.1.4.1.2011.5.25.111.8.1.1.65Gauge32read-onlycurrent
nqaJitterCollectStatsFragPktDisorderNum
OBJECT-TYPE
The number of all the packets whose fragments have been disordered.
1.3.6.1.4.1.2011.5.25.111.8.1.1.66Counter32read-onlycurrent
nqaJitterCollectStatsFragPktDisorderRatio
OBJECT-TYPE
The ratio of all the packets whose fragments have been disordered.
1.3.6.1.4.1.2011.5.25.111.8.1.1.67Gauge32read-onlycurrent
nqaAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.111.9
nqaMaxAlarmNum
OBJECT-TYPE
Maximum number of alarms.
1.3.6.1.4.1.2011.5.25.111.9.1Integer32 (1..2147483647)read-onlycurrent
nqaMaxEventNum
OBJECT-TYPE
Maximum number of events that alarms can trigger.
1.3.6.1.4.1.2011.5.25.111.9.2Integer32 (1..2147483647)read-onlycurrent
nqaAlarmTable
OBJECT-TYPE
A list of alarm entries.
1.3.6.1.4.1.2011.5.25.111.9.3not-accessiblecurrent
nqaAlarmEntry
OBJECT-TYPE
A list of parameters that set up a periodic checking for alarm conditions.
1.3.6.1.4.1.2011.5.25.111.9.3.1not-accessiblecurrent
nqaAlarmIndex
OBJECT-TYPE
Uniquely identifies a row in the nqaAlarmTable.
1.3.6.1.4.1.2011.5.25.111.9.3.1.1Integer32 (1..65535)not-accessiblecurrent
nqaAlarmVariable
OBJECT-TYPE
The type of the particular variable to be sampled.
1.3.6.1.4.1.2011.5.25.111.9.3.1.11INTEGER {rttAvg(1), lostPacketRatio(2), packetLossSd(3), packetLossDs(4), jitterRavg(5), jitterSdAvg(6), jitterDsAvg(7)}read-createcurrent
nqaAlarmSampleType
OBJECT-TYPE
delta(1): relative value absolute(2): absolute value Relative value: indicates the relative value to the last sampling. Currently, only absolute(2) is supported.
1.3.6.1.4.1.2011.5.25.111.9.3.1.12INTEGER {delta(1), absolute(2)}read-createcurrent
nqaAlarmValue
OBJECT-TYPE
The actual value of the monitored object is compared with the upper limit and lower limit.
1.3.6.1.4.1.2011.5.25.111.9.3.1.13Integer32 (0..2147483647)read-onlycurrent
nqaAlarmStartUpNqaAlarm
OBJECT-TYPE
The alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThreshold and alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3), then a single rising alarm will be generated. If the first sample after this entry becomes valid is less than or equal to the fallingThreshold and alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3), then a single falling alarm will be generated.
1.3.6.1.4.1.2011.5.25.111.9.3.1.14INTEGER {risingAlarm(1), fallingAlarm(2), risingOrFallingAlarm(3)}read-createcurrent
nqaAlarmRisingThreshold
OBJECT-TYPE
Set the upper limit of the alarm.
1.3.6.1.4.1.2011.5.25.111.9.3.1.15Integer32 (0..2147483647)read-createcurrent
nqaAlarmFallingThreshold
OBJECT-TYPE
Set the lower limit of the alarm.
1.3.6.1.4.1.2011.5.25.111.9.3.1.16Integer32 (0..2147483647)read-createcurrent
nqaAlarmRisingEventIndex
OBJECT-TYPE
Index of the event triggered when the node value exceeds the upper limit.
1.3.6.1.4.1.2011.5.25.111.9.3.1.17Integer32 (1..65535)read-createcurrent
nqaAlarmFallingEventIndex
OBJECT-TYPE
Index of the event triggered when the node value is under the lower limit.
1.3.6.1.4.1.2011.5.25.111.9.3.1.18Integer32 (1..65535)read-createcurrent
nqaAlarmDescription
OBJECT-TYPE
Alarm Description.
1.3.6.1.4.1.2011.5.25.111.9.3.1.19OCTET STRING (SIZE(0..127))read-createcurrent
nqaAlarmStatus
OBJECT-TYPE
The status of the alarm row.
1.3.6.1.4.1.2011.5.25.111.9.3.1.51RowStatusread-createcurrent
nqaEventTable
OBJECT-TYPE
A list of events to be generated.
1.3.6.1.4.1.2011.5.25.111.9.4not-accessiblecurrent
nqaEventEntry
OBJECT-TYPE
A set of parameters that describe an event to be generated when certain conditions are met.
1.3.6.1.4.1.2011.5.25.111.9.4.1not-accessiblecurrent
nqaEventIndex
OBJECT-TYPE
Uniquely identifies a row in the nqaEventTable.
1.3.6.1.4.1.2011.5.25.111.9.4.1.1Integer32 (1..65535)not-accessiblecurrent
nqaEventType
OBJECT-TYPE
Event type, that is, behaviors for processing events: none(1): no behavior log(2): keeping logs trap(3): sending trap messages logandtrap(4): keeping logs and sending trap messages linkage(5): start the linkaged test-instance.
1.3.6.1.4.1.2011.5.25.111.9.4.1.11INTEGER {none(1), log(2), trap(3), logAndTrap(4), linkage(5)}read-createcurrent
nqaEventDescription
OBJECT-TYPE
Event description.
1.3.6.1.4.1.2011.5.25.111.9.4.1.12OCTET STRING (SIZE(0..127))read-createcurrent
nqaEventAdminName
OBJECT-TYPE
Administrator name of event test instance.
1.3.6.1.4.1.2011.5.25.111.9.4.1.13OCTET STRING (SIZE(0..32))read-createcurrent
nqaEventOperationTag
OBJECT-TYPE
Operation tag of event test instance.
1.3.6.1.4.1.2011.5.25.111.9.4.1.14OCTET STRING (SIZE(0..32))read-createcurrent
nqaEventStatus
OBJECT-TYPE
The status of the event row.
1.3.6.1.4.1.2011.5.25.111.9.4.1.51RowStatusread-createcurrent
nqaSaveRecord
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.111.10
nqaFtpSaveRecordEnable
OBJECT-TYPE
Identifies whether saving test results to the FTP server through FTP is enabled. enable(1) disable(2) By default, the value is disable(2).
1.3.6.1.4.1.2011.5.25.111.10.1EnabledStatusread-writecurrent
nqaFtpSaveRecordIpAddr
OBJECT-TYPE
Set the IP address of the FTP server to which test results are saved.
1.3.6.1.4.1.2011.5.25.111.10.2InetAddressread-writecurrent
nqaFtpSaveRecordVrfName
OBJECT-TYPE
Set the name of the VRF instance for the FTP server to which test results are saved.
1.3.6.1.4.1.2011.5.25.111.10.3OCTET STRING (SIZE(0..31))read-writecurrent
nqaFtpSaveRecordUserName
OBJECT-TYPE
Set the user name of the FTP server to which test results are saved.
1.3.6.1.4.1.2011.5.25.111.10.4OCTET STRING (SIZE(0..32))read-writecurrent
nqaFtpSaveRecordPassword
OBJECT-TYPE
Set the password used when the test results are saved to the FTP server.
1.3.6.1.4.1.2011.5.25.111.10.5OCTET STRING (SIZE(0..32))read-writecurrent
nqaFtpSaveRecordFileName
OBJECT-TYPE
Set the file name of used by the FTP server to save test results.
1.3.6.1.4.1.2011.5.25.111.10.6OCTET STRING (SIZE(0..200))read-writecurrent
nqaFtpSaveRecordItemNum
OBJECT-TYPE
The value of this object identifies the number of NQA test results that can be saved in a file created on the FTP server. The default value is 100000.
1.3.6.1.4.1.2011.5.25.111.10.7Integer32 (10000..2147483647)read-writecurrent
nqaFtpSaveRecordTime
OBJECT-TYPE
The value of this object identifies the duration that NQA test results can be saved in a file created on the FTP server. The default duration is 60 minutes.
1.3.6.1.4.1.2011.5.25.111.10.8Integer32 (1..43200)read-writecurrent
nqaFtpSaveRecordNotificationEnable
OBJECT-TYPE
Set whether to send trap messages when saving test results to the FTP server is completed. By default, the value is disable(2).
1.3.6.1.4.1.2011.5.25.111.10.9EnabledStatusread-writecurrent
nqaFtpSaveRecordLastFileName
OBJECT-TYPE
Set the name of the file used to save the last test record to the FTP server.
1.3.6.1.4.1.2011.5.25.111.10.10OCTET STRING (SIZE(0..220))read-onlycurrent

Notifications

NameOIDStatus
nqaResultsProbeFailed
NOTIFICATION-TYPE
Generated when a probe failure is detected when the corresponding nqaAdminParaTrapGeneration object is set to probeFailure(0) subject to the value of nqaAdminParaTrapProbeFailureFilter. The object nqaAdminParaTrapProbeFailureFilter can be used to specify the number of successive probe failures that are required before this notification can be generated.(except for HTTP or Jitter or FTP)
1.3.6.1.4.1.2011.5.25.111.6.1current
nqaResultsTestFailed
NOTIFICATION-TYPE
Generated when a nqa test is determined to have failed when the corresponding nqaAdminParaTrapGeneration object is set to testFailure(1). In this instance nqaAdminParaTrapTestFailureFilter should specify the number of probes in a test required to have failed in order to consider the test as failed. (Except for HTTP or Jitter or FTP)
1.3.6.1.4.1.2011.5.25.111.6.2current
nqaResultsTestCompleted
NOTIFICATION-TYPE
Generated at the completion of a nqa test when the corresponding nqaAdminParaTrapGeneration object is set to testCompletion(2).(except for HTTP or Jitter or FTP)
1.3.6.1.4.1.2011.5.25.111.6.3current
nqaResultsThresholdNotification
NOTIFICATION-TYPE
If the time of executing tests exceeds the nqaAdminCtrlThreshold1, the system sends trap information.(except for HTTP or Jitter or FTP)
1.3.6.1.4.1.2011.5.25.111.6.4current
nqaHTTPStatsProbeFailed
NOTIFICATION-TYPE
Generated when a probe failure is detected when the corresponding nqaAdminParaTrapGeneration object is set to probeFailure(0) subject to the value of nqaAdminParaTrapProbeFailureFilter. The object nqaAdminParaTrapProbeFailureFilter can be used to specify the number of successive probe failures that are required before this notification can be generated.(Only for HTTP)
1.3.6.1.4.1.2011.5.25.111.6.5current
nqaHTTPStatsTestFailed
NOTIFICATION-TYPE
Generated when a HTTP test is determined to have failed when the corresponding nqaAdminParaTrapGeneration object is set to testFailure(1). In this instance nqaAdminParaTrapTestFailureFilter should specify the number of probes in a test required to have failed in order to consider the test as failed.(Only for HTTP)
1.3.6.1.4.1.2011.5.25.111.6.6current
nqaHTTPStatsTestCompleted
NOTIFICATION-TYPE
Generated at the completion of a HTTP test when the corresponding nqaAdminParaTrapGeneration object is set to testCompletion(2).
1.3.6.1.4.1.2011.5.25.111.6.7current
nqaHTTPStatsThresholdNotification
NOTIFICATION-TYPE
If the time of executing tests exceeds the nqaAdminCtrlThreshold1 or nqaAdminCtrlThreshold2 or nqaAdminCtrlThreshold3, the system sends trap information.(Only for HTTP)
1.3.6.1.4.1.2011.5.25.111.6.8current
nqaJitterStatsProbeFailed
NOTIFICATION-TYPE
Generated when a probe failure is detected when the corresponding nqaAdminParaTrapGeneration object is set to probeFailure(0) subject to the value of nqaAdminParaTrapProbeFailureFilter. The object nqaAdminParaTrapProbeFailureFilter can be used to specify the number of successive probe failures that are required before this notification can be generated.(Only for Jitter)
1.3.6.1.4.1.2011.5.25.111.6.9current
nqaJitterStatsTestFailed
NOTIFICATION-TYPE
Generated when a Jitter test is determined to have failed when the corresponding nqaAdminParaTrapGeneration object is set to testFailure(1). In this instance nqaAdminParaTrapTestFailureFilter should specify the number of probes in a test required to have failed in order to consider the test as failed.(Only for Jitter)
1.3.6.1.4.1.2011.5.25.111.6.10current
nqaJitterStatsTestCompleted
NOTIFICATION-TYPE
Generated at the completion of a Jitter test when the corresponding nqaAdminParaTrapGeneration object is set to testCompletion(2). (Only for Jitter)
1.3.6.1.4.1.2011.5.25.111.6.11current
nqaFTPStatsProbeFailed
NOTIFICATION-TYPE
Generated when a probe failure is detected when the corresponding nqaAdminParaTrapGeneration object is set to probeFailure(0) subject to the value of nqaAdminParaTrapProbeFailureFilter. The object nqaAdminParaTrapProbeFailureFilter can be used to specify the number of successive probe failures that are required before this notification can be generated.(Only for FTP)
1.3.6.1.4.1.2011.5.25.111.6.12current
nqaFTPStatsTestFailed
NOTIFICATION-TYPE
Generated when a FTP test is determined to have failed when the corresponding nqaAdminParaTrapGeneration object is set to testFailure(1). In this instance nqaAdminParaTrapTestFailureFilter should specify the number of probes in a test required to have failed in order to consider the test as failed.(Only for FTP)
1.3.6.1.4.1.2011.5.25.111.6.13current
nqaFTPStatsTestCompleted
NOTIFICATION-TYPE
Generated at the completion of a FTP test when the corresponding nqaAdminParaTrapGeneration object is set to testCompletion(2). (Only for FTP)
1.3.6.1.4.1.2011.5.25.111.6.14current
nqaFTPStatsThresholdNotification
NOTIFICATION-TYPE
If the time of executing tests exceeds the nqaAdminCtrlThreshold1 or nqaAdminCtrlThreshold2, the system sends trap information.(Only for FTP)
1.3.6.1.4.1.2011.5.25.111.6.15current
nqaJitterStatsRTDThresholdNotification
NOTIFICATION-TYPE
If the time of executing tests exceeds the nqaAdminCtrlThreshold1, the system sends trap information. (Only for jitter)
1.3.6.1.4.1.2011.5.25.111.6.16current
nqaJitterStatsOWDThresholdNotificationSD
NOTIFICATION-TYPE
If the time of executing tests exceeds the nqaAdminCtrlThreshold2 the system sends trap information. (Only for jitter)
1.3.6.1.4.1.2011.5.25.111.6.17current
nqaJitterStatsOWDThresholdNotificationDS
NOTIFICATION-TYPE
If the time of executing tests exceeds the nqaAdminCtrlThreshold3 the system sends trap information. (Only for jitter)
1.3.6.1.4.1.2011.5.25.111.6.18current
nqaNegotiateFailed
NOTIFICATION-TYPE
If negotiation between client and server failed,the system sends trap information.
1.3.6.1.4.1.2011.5.25.111.6.19current
nqaRisingAlarmNotification
NOTIFICATION-TYPE
Sending trap messages when the value of the monitored object exceeds nqaAlarmUpperThreshold.
1.3.6.1.4.1.2011.5.25.111.6.20current
nqaFallingAlarmNotification
NOTIFICATION-TYPE
Sending trap messages when the value of the monitored object is under nqaAlarmLowerThreshold.
1.3.6.1.4.1.2011.5.25.111.6.21current
nqaFtpSaveRecordNotification
NOTIFICATION-TYPE
Sending trap messages when saving a test result to the FTP server is completed.
1.3.6.1.4.1.2011.5.25.111.6.22current
nqaPppoeStatsTestFailed
NOTIFICATION-TYPE
Generated when a PPPoE test is determined to have failed when the corresponding nqaAdminParaTrapGeneration object is set to testFailure(1). (Only for PPPoE))
1.3.6.1.4.1.2011.5.25.111.6.23current
nqaPppoeStatsTestCompleted
NOTIFICATION-TYPE
Generated at the completion of a PPPoE test when the corresponding nqaAdminParaTrapGeneration object is set to testCompletion(2). (Only for PPPoE)
1.3.6.1.4.1.2011.5.25.111.6.24current

Conformance

NameOIDStatus
nqaBaseGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.5.25.111.7.1.1current
nqaAdminGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.5.25.111.7.1.2current
nqaServerGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.5.25.111.7.1.3current
nqaStatsGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.5.25.111.7.1.4current
nqaHistoryGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.5.25.111.7.1.5current
nqaNotificationsGroup
NOTIFICATION-GROUP
The notification which are required to be supported by implementations of this MIB.
1.3.6.1.4.1.2011.5.25.111.7.1.6current
nqaCollectStatsGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.5.25.111.7.1.7current
nqaAlarmGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.5.25.111.7.1.8current
nqaFtpSaveRecordGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.5.25.111.7.1.9current
nqaCompliance
MODULE-COMPLIANCE
Description.
1.3.6.1.4.1.2011.5.25.111.7.2.1current