NORTEL-SECURE-NETWORK-ACCESS-MIB
- Registered at
- 1.3.6.1.4.1.45.5.10
- Last updated
- 2007-06-29 00:00
- Organization
- Nortel Networks
- Revisions
- 2007-06-29 00:00, 2007-05-21 00:00, 2007-04-18 00:00, 2007-03-13 00:00, 2006-11-30 00:00, 2006-07-07 00:00, 2006-05-22 00:00, 2006-05-19 00:00, 2006-04-26 00:00, 2006-02-24 00:00, 2005-10-24 00:00, 2005-08-18 00:00, 2005-08-10 00:00, 2005-07-28 00:00, 2005-07-18 00:00, 2005-07-07 00:00, 2005-06-22 00:00, 2005-06-02 00:00, 2005-05-04 00:00, 2005-04-21 00:00, 2005-04-19 00:00
- Namespace
- nortel
- Source file
NORTEL-SECURE-NETWORK-ACCESS-MIB- Digest
sha256:f5af9efc4ba860324c56b8105eeee173024712b985b8dc63a306d4d6307d146f
Description
Nortel Networks NSNA MIB Copyright 2004 Nortel Networks, Inc. All rights reserved. This Nortel Networks SNMP Management Information Base Specification embodies Nortel Networks' confidential and proprietary intellectual property. Nortel Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS,' and Nortel Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Contact
Nortel Networks
Imports
| From | Symbols |
|---|---|
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressPrefixLength, InetAddressType, InetPortNumber |
| Q-BRIDGE-MIB | VlanId, VlanIdOrNone |
| RAPID-CITY | IdList |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| SYNOPTICS-ROOT-MIB | bayStackMibs |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ATM-TC-MIB BGP4-MIB BRIDGE-MIB DIFFSERV-DSCP-TC DIFFSERV-MIB DVMRP-STD-MIB IANA-ADDRESS-FAMILY-NUMBERS-MIB IANA-RTPROTO-MIB IANAifType-MIB IEEE8021-SECY-MIB IF-MIB IGMP-STD-MIB INET-ADDRESS-MIB INTEGRATED-SERVICES-MIB IP-MIB IPMROUTE-STD-MIB IPV6-MIB IPV6-MLD-MIB IPV6-TC LLDP-MIB MPLS-TC-STD-MIB MSDP-MIB NORTEL-SECURE-NETWORK-ACCESS-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RADIUS-DYNAUTH-SERVER-MIB RAPID-CITY RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC SYNOPTICS-ROOT-MIB TOKEN-RING-RMON-MIB VRRP-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| NsnaVlanIdOrNone TEXTUAL-CONVENTION The VLAN ID that uniquely identifies a specific VLAN, or no VLAN. The special value of zero is used to indicate that no VLAN ID is present or used. This can be used in any situation where an object or a table entry must refer either to a specific VLAN, or to no VLAN. Note that a MIB object that is defined using this TEXTUAL-CONVENTION should clarify the meaning of 'no VLAN' (i.e., the special value 0). | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| nsnaNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.45.5.10.0 | |||
| nsnaObjects OBJECT-IDENTITY | 1.3.6.1.4.1.45.5.10.1 | |||
| nsnaScalars OBJECT-IDENTITY | 1.3.6.1.4.1.45.5.10.1.1 | |||
| nsnaEnabled OBJECT-TYPE Indicates whether NSNA is globally enabled for the system. | 1.3.6.1.4.1.45.5.10.1.1.1 | TruthValue | read-write | current |
| nsnaNsnasConnectionState OBJECT-TYPE Indicates whether the switch currently has a connection to an NSNAS, whether the switch is currently in the process of establishing a connection to an NSNAS, or whether an existing connecting to an NSNAS is in the process of being closed. | 1.3.6.1.4.1.45.5.10.1.1.3 | INTEGER {notConnected(1), connected(2), connecting(3), closing(4)} | read-only | current |
| nsnaNsnasInetAddressType OBJECT-TYPE If a NSNAS is currently connected to the switch, this indicates the type of the internet address from which the NSNAS connected. The contents of nsnaSnasInetAddress will be of this type. If there is not currently a NSNAS connected, the value will be unknown(0). | 1.3.6.1.4.1.45.5.10.1.1.4 | InetAddressType | read-only | current |
| nsnaNsnasInetAddress OBJECT-TYPE If a NSNAS is currently connected to the switch, this indicates the internet address from which the NSNAS connected. If there is not currently a NSNAS connected, this will be an empty string. | 1.3.6.1.4.1.45.5.10.1.1.5 | InetAddress | read-only | current |
| nsnaNsnasSendHelloInterval OBJECT-TYPE The interval for sending SSCP Hello messages for the current SSCP connection. If this period of time passes without any SSCP messages being sent, a Hello message will be generated. If there is not curently an NSNAS connected, this value will be zero, otherwise it will be non-zero. | 1.3.6.1.4.1.45.5.10.1.1.6 | Integer32 (0..65535) | read-only | current |
| nsnaNsnasInactivityInterval OBJECT-TYPE The inactivity interval for the current SSCP connection. If this period of time passes without any SSCP messages being received, the SSCP connection will be closed. If there is not curently an NSNAS connected, this value will be zero, otherwise it will be non-zero. | 1.3.6.1.4.1.45.5.10.1.1.7 | Integer32 (0..65535) | read-only | current |
| nsnaNsnasStatusQuoInterval OBJECT-TYPE The status-quo interval for the current or last SSCP connection. If the NSNAS is disconnected from the switch for any reason, the switch will wait this period of time before moving all NSNA enabled ports to the red VLAN. The maximum value, 65535, indicates an infinite status quo interval, i.e., SSA enabled ports will not be moved to the red VLAN. A value of 0 means no status quo interval is used, and ports are immediately moved the the red VLAN if the NSNAS is disconnected. If the NSNAS has disconnected and the status-quo interval timer is running, this value will reflect the remaining time until the status-quo timer will expire. | 1.3.6.1.4.1.45.5.10.1.1.8 | Integer32 (0..65535) | read-only | current |
| nsnaMacAuthenticationEnabled OBJECT-TYPE This object indicates whether MAC Authentication is currently enabled on the switch. | 1.3.6.1.4.1.45.5.10.1.1.9 | TruthValue | read-only | current |
| nsnaFailOpenEnabled OBJECT-TYPE This object indicates whether the Fail-Open feature is currently enabled on the switch. | 1.3.6.1.4.1.45.5.10.1.1.10 | TruthValue | read-write | current |
| nsnaFailOpenVlan OBJECT-TYPE This object indicates the current Fail-Open Vlan ID. A value of 0 indicates the value either has not been set, or that the previous value is no longer valid. | 1.3.6.1.4.1.45.5.10.1.1.11 | VlanIdOrNone | read-write | current |
| nsnaFailOpenFilterVlan OBJECT-TYPE This object indicates the current Vlan ID whose associated filters are to be used as the Fail-Open filters. A value of 0 indicates the value either has not been set, or that the previous value is no longer valid. | 1.3.6.1.4.1.45.5.10.1.1.12 | VlanIdOrNone | read-write | current |
| nsnaNsnasConnectionVersion OBJECT-TYPE This object indicates the SSCP version being used in the current NSNAS connection. If there is no current connection, the value will be 0. | 1.3.6.1.4.1.45.5.10.1.1.14 | Integer32 (0..65535) | read-only | current |
| nsnaNsnasRadiusServerEnabled OBJECT-TYPE This object indicates whether the NSNAS currently connected to the switch is acting as a RADIUS server. | 1.3.6.1.4.1.45.5.10.1.1.15 | TruthValue | read-only | current |
| nsnaNsnasRadiusServerPort OBJECT-TYPE If there is an NSNAS currently connected to the switch that is acting as a RADIUS server, this object returns the port on which that server listens for RADIUS requests. | 1.3.6.1.4.1.45.5.10.1.1.16 | InetPortNumber | read-only | current |
| nsnaNsnasTable OBJECT-TYPE The table of subnets from which NSNASs will connect. | 1.3.6.1.4.1.45.5.10.1.2 | not-accessible | current | |
| nsnaNsnasEntry OBJECT-TYPE A set of objects that specify a subnet from which NSNASs will connect, along with related configuration parameters. | 1.3.6.1.4.1.45.5.10.1.2.1 | not-accessible | current | |
| nsnaNsnasAddressType OBJECT-TYPE The type of internet address contained in nsnaNsnasAddress. | 1.3.6.1.4.1.45.5.10.1.2.1.1 | InetAddressType | not-accessible | current |
| nsnaNsnasAddress OBJECT-TYPE The internet address portion of the NSNAS subnet. This combined with the value of nsnaNsnasAddressMask specifies the subnet of the NSNAS. | 1.3.6.1.4.1.45.5.10.1.2.1.2 | InetAddress | not-accessible | current |
| nsnaNsnasAddressMask OBJECT-TYPE The address mask portion of the NSNAS subnet. This combined with the value of nsnaNsnasAddress specifies the subnet of the NSNAS. | 1.3.6.1.4.1.45.5.10.1.2.1.3 | InetAddressPrefixLength | not-accessible | current |
| nsnaNsnasPort OBJECT-TYPE The port on which NSNASs connecting from this subnet will connect. | 1.3.6.1.4.1.45.5.10.1.2.1.4 | InetPortNumber (1024..65535) | read-create | current |
| nsnaNsnasRowStatus OBJECT-TYPE This object is used for row create/deletion. | 1.3.6.1.4.1.45.5.10.1.2.1.5 | RowStatus | read-create | current |
| nsnaPortTable OBJECT-TYPE The table of per-port NSNA configuration parameters. There must be an entry in this table for each NSNA-capable port. | 1.3.6.1.4.1.45.5.10.1.3 | not-accessible | current | |
| nsnaPortEntry OBJECT-TYPE NSNA configuration parameters for a port. | 1.3.6.1.4.1.45.5.10.1.3.1 | not-accessible | current | |
| nsnaPortIfIndex OBJECT-TYPE The ifIndex corresponding to the port. | 1.3.6.1.4.1.45.5.10.1.3.1.1 | InterfaceIndex | not-accessible | current |
| nsnaPortMode OBJECT-TYPE The NSNA mode of the port. | 1.3.6.1.4.1.45.5.10.1.3.1.2 | INTEGER {disabled(1), static(2), dynamic(3), uplink(4), secure(5)} | read-write | current |
| nsnaPortGreenVlanId OBJECT-TYPE The green VLAN ID of the port. This value is only used when the corresponding value of nsnaPortMode is static(2). Otherwise, the value will be 0. | 1.3.6.1.4.1.45.5.10.1.3.1.3 | NsnaVlanIdOrNone | read-write | current |
| nsnaPortVoipVlans OBJECT-TYPE The set of VOIP VLANs to which this port belongs. This value is only used when the corresponding value of nsnaPortMode is static(2), dynamic(3), or secure(5). | 1.3.6.1.4.1.45.5.10.1.3.1.4 | IdList | read-write | current |
| nsnaPortUplinkVlans OBJECT-TYPE The set of uplink VLANs to which this port belongs. This value is only used when the corresponding value of nsnaPortMode is uplink(4). | 1.3.6.1.4.1.45.5.10.1.3.1.5 | IdList | read-write | current |
| nsnaPortState OBJECT-TYPE The current NSNA color of the port. | 1.3.6.1.4.1.45.5.10.1.3.1.6 | INTEGER {none(1), red(2), green(3), yellow(4)} | read-only | current |
| nsnaPortDhcpState OBJECT-TYPE The DHCP state of the port. | 1.3.6.1.4.1.45.5.10.1.3.1.7 | INTEGER {blocked(1), unblocked(2)} | read-only | current |
| nsnaPortHubModeEnabled OBJECT-TYPE Indicates whether Hub Mode is enabled on a port. | 1.3.6.1.4.1.45.5.10.1.3.1.8 | TruthValue | read-write | current |
| nsnaPortHubModeMaxClients OBJECT-TYPE The maximum number of clients allowed on a port when Hub Mode is enabled. The value is ignored if Hub Mode is disabled. | 1.3.6.1.4.1.45.5.10.1.3.1.9 | Integer32 (1..8) | read-write | current |
| nsnaVlanTable OBJECT-TYPE The table of per-Vlan NSNA configuration parameters. There must be an entry in this table for every Vlan. | 1.3.6.1.4.1.45.5.10.1.4 | not-accessible | current | |
| nsnaVlanEntry OBJECT-TYPE NSNA configuration parameters for a Vlan. | 1.3.6.1.4.1.45.5.10.1.4.1 | not-accessible | current | |
| nsnaVlanId OBJECT-TYPE The ID of the Vlan. | 1.3.6.1.4.1.45.5.10.1.4.1.1 | VlanId | not-accessible | current |
| nsnaVlanColor OBJECT-TYPE The NSNA color of the Vlan. | 1.3.6.1.4.1.45.5.10.1.4.1.2 | INTEGER {none(1), red(2), green(3), yellow(4), voip(5)} | read-write | current |
| nsnaVlanFilterSetName OBJECT-TYPE The name of the filter set associated with the VLAN. An empty value means that no filter set is associated with the VLAN. | 1.3.6.1.4.1.45.5.10.1.4.1.3 | SnmpAdminString (SIZE(0..255)) | read-write | current |
| nsnaVlanFilterSetId OBJECT-TYPE The ID of the filter set associated with the VLAN. A value of 0 means that no filter set is associated with the VLAN. | 1.3.6.1.4.1.45.5.10.1.4.1.4 | Integer32 (0..1024) | read-write | current |
| nsnaVlanYellowSubnetType OBJECT-TYPE The type of internet address contained in the corresponding instance of nsnaVlanYellowSubnet. | 1.3.6.1.4.1.45.5.10.1.4.1.5 | InetAddressType | read-write | current |
| nsnaVlanYellowSubnet OBJECT-TYPE The yellow subnet address of the VLAN. This value is only used when the corresponding value of nsnaVlanColor is yellow(4). | 1.3.6.1.4.1.45.5.10.1.4.1.6 | InetAddress | read-write | current |
| nsnaVlanYellowSubnetMask OBJECT-TYPE The number of bits in the network mask of the yellow subnet address of the VLAN. This value is only used when the corresponding value of nsnaVlanColor is yellow(4). | 1.3.6.1.4.1.45.5.10.1.4.1.7 | InetAddressPrefixLength | read-write | current |
| nsnaClientTable OBJECT-TYPE The table of per-client NSNA state information. There must be an entry in this table for every NSNA client. | 1.3.6.1.4.1.45.5.10.1.5 | not-accessible | current | |
| nsnaClientEntry OBJECT-TYPE State information for an NSNA client. | 1.3.6.1.4.1.45.5.10.1.5.1 | not-accessible | current | |
| nsnaClientIfIndex OBJECT-TYPE The ifIndex of the port on which the client is attached. | 1.3.6.1.4.1.45.5.10.1.5.1.1 | InterfaceIndex | not-accessible | current |
| nsnaClientMacAddress OBJECT-TYPE The MAC address of the client. | 1.3.6.1.4.1.45.5.10.1.5.1.2 | MacAddress | not-accessible | current |
| nsnaClientDeviceType OBJECT-TYPE The type of device of the client. | 1.3.6.1.4.1.45.5.10.1.5.1.3 | INTEGER {unknown(0), pc(1), ipPhone(2), passive(3)} | read-only | current |
| nsnaClientVlanId OBJECT-TYPE The Vlan ID of the client. | 1.3.6.1.4.1.45.5.10.1.5.1.4 | VlanId | read-only | current |
| nsnaClientAddressType OBJECT-TYPE The type of address contained in the corresponding instance of nsnaClientAddress. | 1.3.6.1.4.1.45.5.10.1.5.1.5 | InetAddressType | read-only | current |
| nsnaClientAddress OBJECT-TYPE The IP address of the client. | 1.3.6.1.4.1.45.5.10.1.5.1.6 | InetAddress | read-only | current |
| nsnaClientExpired OBJECT-TYPE Indicates whether this client has been aged-out. | 1.3.6.1.4.1.45.5.10.1.5.1.7 | TruthValue | read-only | current |
| nsnaClientFilterVlanId OBJECT-TYPE The Vlan ID whose associated filter set is installed on this port for this client. This is used when MAC Authentication is enabled. If MAC Authentication is no enabled, this object will return the same value as nsnaClientVlanId. | 1.3.6.1.4.1.45.5.10.1.5.1.8 | VlanId | read-only | current |
| nsnaClientStatus OBJECT-TYPE The status of this client. | 1.3.6.1.4.1.45.5.10.1.5.1.9 | INTEGER {authenticatedByNsnas(1), authenticatedLocally(2), disallowedByNsnas(3), isolatedByNsnas(4), blacklistedByNsnas(5)} | read-only | current |
| nsnaStaticClientTable OBJECT-TYPE The table of static NSNA client configuration. This is used for authenticating clients on static NSNA ports. | 1.3.6.1.4.1.45.5.10.1.6 | not-accessible | current | |
| nsnaStaticClientEntry OBJECT-TYPE Static NSNA client configuration. | 1.3.6.1.4.1.45.5.10.1.6.1 | not-accessible | current | |
| nsnaStaticClientVlanId OBJECT-TYPE The VLAN ID in which a client is allowed. | 1.3.6.1.4.1.45.5.10.1.6.1.1 | VlanId | not-accessible | current |
| nsnaStaticClientMacAddress OBJECT-TYPE The MAC address of an allowed client. | 1.3.6.1.4.1.45.5.10.1.6.1.2 | MacAddress | not-accessible | current |
| nsnaStaticClientDeviceType OBJECT-TYPE The type of device of the allowed client. | 1.3.6.1.4.1.45.5.10.1.6.1.3 | INTEGER {pc(1), ipPhone(2), passive(3)} | read-create | current |
| nsnaStaticClientAddressType OBJECT-TYPE The type of address contained in the corresponding instance of nsnaStaticClientAddress. | 1.3.6.1.4.1.45.5.10.1.6.1.4 | InetAddressType | read-create | current |
| nsnaStaticClientAddress OBJECT-TYPE The IP address to be used for the allowed client. | 1.3.6.1.4.1.45.5.10.1.6.1.5 | InetAddress | read-create | current |
| nsnaStaticClientRowStatus OBJECT-TYPE Used for row creation/deletion. When creating a row, the corresponding instances of nsnaStaticClientDeviceType, nsnaStaticClientAddressType, and nsnaStaticClientAddress must be set before this object can be made active(1). | 1.3.6.1.4.1.45.5.10.1.6.1.6 | RowStatus | read-create | current |
| nsnaIpPhoneSignatureTable OBJECT-TYPE The table of IP phone signature string configuration. This is used for recognizing IP phones. | 1.3.6.1.4.1.45.5.10.1.7 | not-accessible | current | |
| nsnaIpPhoneSignatureEntry OBJECT-TYPE IP phone signature string configuration. | 1.3.6.1.4.1.45.5.10.1.7.1 | not-accessible | current | |
| nsnaIpPhoneSignatureString OBJECT-TYPE The signature string of an IP phone. | 1.3.6.1.4.1.45.5.10.1.7.1.1 | OCTET STRING (SIZE(1..64)) | not-accessible | current |
| nsnaIpPhoneSignatureRowStatus OBJECT-TYPE Used for row creation/deletion. | 1.3.6.1.4.1.45.5.10.1.7.1.2 | RowStatus | read-create | current |
| nsnaNotificationObjects OBJECT-IDENTITY | 1.3.6.1.4.1.45.5.10.1.8 | |||
| nsnaClosedConnectionReason OBJECT-TYPE Indicates the reason why the connection to the NSNAS was closed. | 1.3.6.1.4.1.45.5.10.1.8.1 | INTEGER {unknown(1), snasClosedConnection(2), dataStreamCorrupted(3), bufferAllocationFailure(4), messageProcessingFailure(5), inactivityIntervalExpired(6), nsnaAdministrativelyDown(7)} | accessible-for-notify | current |
| nsnaInvalidMessageHeader OBJECT-TYPE The header of an invalid message from the NSNAS. Note that if an entire header is not available, only the portion that is available will be provided in this object. | 1.3.6.1.4.1.45.5.10.1.8.2 | OCTET STRING (SIZE(0..8)) | accessible-for-notify | current |
Notifications
| Name | OID | Status |
|---|---|---|
| nsnaClosedConnectionToSnas NOTIFICATION-TYPE This notification is generated whenever the device closes the connection to the NSNAS. The reason why the connection is closed is indicated in nsnaClosedConnectionReason. | 1.3.6.1.4.1.45.5.10.0.1 | current |
| nsnaStatusQuoIntervalExpired NOTIFICATION-TYPE This notification is generated whenever the status-quo interval expires after the connection to the NSNAS has closed. Note that if the configured status-quo interval is 0 (indicating no status quo interval), this notification will be generated at the same time as the corresponding nsnaClosedConnectionToSnas notification. | 1.3.6.1.4.1.45.5.10.0.2 | current |
| nsnaInvalidMessageFromSnas NOTIFICATION-TYPE This notification is generated whenever the device receives an invalid message from the NSNAS. This generally means that the received message is corrupted. As much of the message header as is available will be included in nsnaInvalidMessageHeader. | 1.3.6.1.4.1.45.5.10.0.3 | current |
| nsnaSnasConnected NOTIFICATION-TYPE This notification is generated whenever an NSNAS successfully connects to the switch. | 1.3.6.1.4.1.45.5.10.0.4 | current |