NETI-VAS-MIB
- Registered at
- 1.3.6.1.4.1.2928.2
- Last updated
- 2015-04-20 07:00
- Organization
- Net Insight AB
- Revisions
- 2015-04-20 07:00, 2015-04-01 00:00
- Namespace
- netinsight
- Source file
NETI-VAS-MIB- Digest
sha256:74ded6a7d67df9874d48f5c4063c208f43ed390924450bbea32305ead87df0bf
Description
This document is work in progress, and it is likely to change. Reference: NID4613. MIB for Video Appliance Services. The MIB describes objects for setting up and monitoring of reliable video transports over an IP network. It also contains configuration objects for encoders and decoders. The MIB contains conceptual tables that describes the different objects: The table vasIfTable contains physical video ports, such as ASI or SDI ports. The table vasEncPipeTable contains video encoder pipelines. A video encoder pipeline can encode the video (e.g. from SDI to MPEG-4) to a stream, and process the audio, video and meta-data. The table vasDecPipeTable contains video decoder pipelines. A video decoder pipeline can decode a stream (from e.g. MPEG-4 to SDI) and process the audio, video and data in the stream. The table vasUdpSnkTable contains objects that receives an UDP video stream on an IP interface and provides it as an input to another source object. The table vasUdpSrcTable contains objects that takes a video stream from a sink object and transmits it as a UDP stream from an IP interface. This object is the complement to an object in the vasUdpSnkTable. The table vasPulSrcTable contains the source objects of a pull transport, i.e. a transport of a stream that is initiated at the sink side, where the stream is pulled from the source (sender) to the sink (receiver) at the sink. The table vasMpuSrcTable contains the source objects of pull transports, where multiple transports to different destinations may be setup from the same source. The table vasPulSnkTable contains the sink part of a pull transport, i.e. a transport of a stream that is initiated at the sink side, where the stream is pulled from the source (sender) to the sink (receiver) at the sink. The table vasPusSrcTable contains the source part of a push transport, i.e. a transport that is initiated from the source side, and is pushed from the source (sender) to the sink (receiver) at the source. The table vasPusSnkTable contains the sink part of a push transport, i.e. a transport that is initiated from the source side, and is pushed from the source (sender) to the sink (receiver) at the source. The MIB also contains tables for statistics.
Contact
Net Insight AB Box 42093 SE-126 14 Stockholm Sweden Tel +46-8-685 0400 info@netinsight.se
Imports
| From | Symbols |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressType, InetPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Counter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, enterprises, iso |
| SNMPv2-TC | DateAndTime, DisplayString, RowPointer, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
INET-ADDRESS-MIB NETI-VAS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Under this module's arcs
Where the registration tree carries on below this module.
| Arc | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2928.2.1 | netiEventMIB | NETI-EVT-MIB |
| 1.3.6.1.4.1.2928.2.2 | netiEthMIB | NETI-ETH-MIB |
| 1.3.6.1.4.1.2928.2.3 | netiTrunkMIB | NETI-TRUNK-MIB |
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| VasCipher TEXTUAL-CONVENTION The cipher: none(0). Encryption is not used. aes128(1). AES-128, encrypted using Advanced Encryption Standard with 128-bit key length. aes192(1). AES-192, encrypted using Advanced Encryption Standard with 192-bit key length. aes256(1). AES-256, encrypted using Advanced Encryption Standard with 256-bit key length. | current | |||
| VasConnectionStatus TEXTUAL-CONVENTION The connection state of the video transport. offline(0). The transport is disabled. connecting(1). The transport is in the process of being established. reconnecting(2). The transport has been established, but has then failed. Attempting to re-establish the connection. connected(3). The transport is connected and operational. unknown(9). The state is unknown. | current | |||
| VasResetStatistics TEXTUAL-CONVENTION reset(0). Reset all statistics. | current | |||
| VasVideoFormat TEXTUAL-CONVENTION Video format. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| netinsight OBJECT-IDENTITY | 1.3.6.1.4.1.2928 | |||
| netiGeneric OBJECT-IDENTITY | 1.3.6.1.4.1.2928.2 | |||
| vasInterfaceGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2928.2.5.1 | |||
| vasIfTable OBJECT-TYPE Table conceptual table contains video interfaces; physical video ports, such as ASI and SDI ports. | 1.3.6.1.4.1.2928.2.5.1.1 | not-accessible | current | |
| vasIfEntry OBJECT-TYPE An entry in the conceptual table represents one video interface. | 1.3.6.1.4.1.2928.2.5.1.1.1 | not-accessible | current | |
| vasIfIndex OBJECT-TYPE An index that uniquely identifies the interface in the table. The index is maintained across reboots of the node. The index is generally a small number. | 1.3.6.1.4.1.2928.2.5.1.1.1.1 | Unsigned32 | not-accessible | current |
| vasIfName OBJECT-TYPE A textual name of the interface. The name is unique within the node. The first part of the name is a string representing the type of interface, the second part of the name contains the device number followed by the port number within the device, separated by a semi-colon. | 1.3.6.1.4.1.2928.2.5.1.1.1.2 | SnmpAdminString | read-only | current |
| vasIfPurpose OBJECT-TYPE A text that can describe the purpose of the interface. This is for administrative use. | 1.3.6.1.4.1.2928.2.5.1.1.1.3 | SnmpAdminString | read-write | current |
| vasIfAdminStatus OBJECT-TYPE The administrative state of the interface. The value controls the desired state of the interface. up(1). The interface shall be enabled. down(2). The interface shall be disabled. | 1.3.6.1.4.1.2928.2.5.1.1.1.4 | INTEGER {up(1), down(2)} | read-write | current |
| vasIfOperStatus OBJECT-TYPE The operational state of the interface. The value normally follow the state of the administrative state. up(1). The interface is up and operational. down(2). The interface is not operational, either because its administrative state is down, or because of an error. If it is down because of an error, an alarm should be raised and the vasIfFailure should describe the fault. | 1.3.6.1.4.1.2928.2.5.1.1.1.5 | INTEGER {up(1), down(2)} | read-only | current |
| vasIfFailure OBJECT-TYPE A text describing the configuration or error status of the interface. The text is the empty string if the configuration is correct and no error is present, otherwise it contains a message describing the error. | 1.3.6.1.4.1.2928.2.5.1.1.1.6 | SnmpAdminString | read-only | current |
| vasIfLastChanged OBJECT-TYPE The value of sysUpTime when status or configuration of the objects was last changed. | 1.3.6.1.4.1.2928.2.5.1.1.1.7 | TimeStamp | read-only | current |
| vasIfResetStatistics OBJECT-TYPE Resets all statistics counters for the interface. (Not yet implemented). | 1.3.6.1.4.1.2928.2.5.1.1.1.8 | VasResetStatistics | read-write | current |
| vasIfInputFrom OBJECT-TYPE If the interface is an output interface, as set on vasIfPortMode, then this is a reference to the object that shall deliver the video stream to the interface. Which type of object that is a valid input depends on the type of interface. If the interface is an input interface, as set on the vasIfPortMode, then the value is always `.0.0'. | 1.3.6.1.4.1.2928.2.5.1.1.1.9 | RowPointer | read-write | current |
| vasIfPortMode OBJECT-TYPE Specifies how the interface shall operate. When the port is set as an input, then a video stream received on the physical port is distributed to the objects having this port as their input. When the port is set as an output, then a video stream received from the object referenced in vasIfInputFrom is transmitted on the physical port. asiInput(1). The port shall operate as an ASI input. asiOutput(2). The port shall operate as an ASI output. sdiInput(3). The port shall operate as an SDI input. sdiOutput(4). The port shall operate as an SDI output. | 1.3.6.1.4.1.2928.2.5.1.1.1.10 | INTEGER {asiInput(1), asiOutput(2), sdiInput(3), sdiOutput(4)} | read-write | current |
| vasIfActiveFormat OBJECT-TYPE The video source format. | 1.3.6.1.4.1.2928.2.5.1.1.1.11 | VasVideoFormat | read-only | current |
| vasEncoderPipeGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2928.2.5.2 | |||
| vasEncPipeTable OBJECT-TYPE The conceptual table contains objects that represent video encoder pipelines. A video encoder pipeline can encode the video (e.g. from SDI to MPEG-4) to a stream, and process the audio, video and meta-data. | 1.3.6.1.4.1.2928.2.5.2.1 | not-accessible | current | |
| vasEncPipeEntry OBJECT-TYPE An entry in the conceptual table represents one encoder pipeline. | 1.3.6.1.4.1.2928.2.5.2.1.1 | not-accessible | current | |
| vasEncPipeIndex OBJECT-TYPE An index that uniquely identifies the encoder pipeline in the table. | 1.3.6.1.4.1.2928.2.5.2.1.1.1 | Unsigned32 | not-accessible | current |
| vasEncPipeRowStatus OBJECT-TYPE See SNMPv2-TC. Use vasEncPipeAdminStatus to activate and de-activate an encoder pipeline. The following values are supported: active(1). The object always reads active. createAndGo(4). A new conceptual row is created representing a new encoder pipeline. To activate the encoder pipeline, set the administrative state to up(1) after all columnar objects have been set. destroy(6). The encoder pipeline is deleted. It can be deleted regardless of its operational state. | 1.3.6.1.4.1.2928.2.5.2.1.1.2 | RowStatus | read-create | current |
| vasEncPipeName OBJECT-TYPE A textual name of the encoder pipeline. The name is automatically assigned by the system. The last part of the name is the index in this table. | 1.3.6.1.4.1.2928.2.5.2.1.1.3 | SnmpAdminString | read-only | current |
| vasEncPipePurpose OBJECT-TYPE A text that can describe the purpose of the encoder pipeline. This is for administrative use. | 1.3.6.1.4.1.2928.2.5.2.1.1.4 | SnmpAdminString | read-create | current |
| vasEncPipeAdminStatus OBJECT-TYPE The administrative state of the encoder pipeline. up(1). The encoder pipeline shall be enabled and allocates the necessary resources. down(2). The encoder pipeline shall be disabled and will not allocate any resources. | 1.3.6.1.4.1.2928.2.5.2.1.1.5 | INTEGER {up(1), down(2)} | read-create | current |
| vasEncPipeOperStatus OBJECT-TYPE The operational state of the encoder pipe. The value normally follow the state of the administrative state. up(1). The encoder pipe is up and operational. down(2). The encoder pipe is not operational, either because its administrative state is down, or because of an error. If it is down because of an error, an alarm should be raised and the vasEncPipeFailure should describe the fault. | 1.3.6.1.4.1.2928.2.5.2.1.1.6 | INTEGER {up(1), down(2)} | read-only | current |
| vasEncPipeFailure OBJECT-TYPE A text describing the configuration or error status of the encoder pipeline. The text is the empty string if the configuration is correct and no error is present, otherwise it contains a message describing the error. | 1.3.6.1.4.1.2928.2.5.2.1.1.7 | SnmpAdminString | read-only | current |
| vasEncPipeLastChanged OBJECT-TYPE The value of sysUpTime when status or configuration of the objects was last changed. | 1.3.6.1.4.1.2928.2.5.2.1.1.8 | TimeStamp | read-only | current |
| vasEncPipeResetStatistics OBJECT-TYPE Resets all statistics counters for the encoder pipe. (Not yet implemented). | 1.3.6.1.4.1.2928.2.5.2.1.1.9 | VasResetStatistics | read-write | current |
| vasEncPipeStatsTr101 OBJECT-TYPE Index for an entry in ETSI TR 101 290 statistics table for this object. (The table is not yet defined). | 1.3.6.1.4.1.2928.2.5.2.1.1.10 | Unsigned32 | read-only | current |
| vasEncPipeEnableTr101 OBJECT-TYPE Enables or disables the ETSI TR 101 290 statistics collection. | 1.3.6.1.4.1.2928.2.5.2.1.1.11 | TruthValue | read-create | current |
| vasEncPipeInputFrom OBJECT-TYPE A reference to the object that shall supply the video stream to the encoder pipe. This could be a physical input port in the vasIfTable, or a stream from e.g. a decoder pipe in the vasDecPipeTable. The value `.0.0' is used when no input is specified. | 1.3.6.1.4.1.2928.2.5.2.1.1.12 | RowPointer | read-create | current |
| vasEncPipeCipher OBJECT-TYPE A cipher to be used when encrypting the transport stream generated by the encoder pipeline. | 1.3.6.1.4.1.2928.2.5.2.1.1.13 | VasCipher | read-create | current |
| vasEncPipeEncryptKey OBJECT-TYPE The key to be used when encrypting the transport stream generated by the encoder pipeline. The key shall be provided as a text with hexadecimal digits presented as lower case characters. | 1.3.6.1.4.1.2928.2.5.2.1.1.14 | SnmpAdminString | read-create | current |
| vasEncPipeProcessedFrames OBJECT-TYPE Running counter of number of encoded frames. | 1.3.6.1.4.1.2928.2.5.2.1.1.15 | Counter32 | read-only | current |
| vasEncPipeCurrentTsBitrate OBJECT-TYPE Current transport stream bitrate in kbps. | 1.3.6.1.4.1.2928.2.5.2.1.1.16 | Unsigned32 | read-only | current |
| vasEncPipeVideoBitrate OBJECT-TYPE Target video bitrate after encoding in kbps. | 1.3.6.1.4.1.2928.2.5.2.1.1.17 | Unsigned32 | read-create | current |
| vasDecoderPipeGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2928.2.5.3 | |||
| vasDecPipeTable OBJECT-TYPE The conceptual table contains objects that represent video decoder pipelines. A video decoder pipeline can decode a stream (from e.g. MPEG-4 to SDI) and process the audio, video and data in the stream. | 1.3.6.1.4.1.2928.2.5.3.1 | not-accessible | current | |
| vasDecPipeEntry OBJECT-TYPE An entry in the conceptual table represents one decoder pipeline. | 1.3.6.1.4.1.2928.2.5.3.1.1 | not-accessible | current | |
| vasDecPipeIndex OBJECT-TYPE An index that uniquely identifies the decoder pipeline in the table. | 1.3.6.1.4.1.2928.2.5.3.1.1.1 | Unsigned32 | not-accessible | current |
| vasDecPipeRowStatus OBJECT-TYPE See SNMPv2-TC. Use vasDecPipeAdminStatus to activate and de-activate a decoder pipeline. The following values are supported: active(1). The object always reads active. createAndGo(4). A new conceptual row is created representing a new decoder pipeline. To activate the decoder pipeline, set the administrative state to up(1) after all columnar objects have been set. destroy(6). The decoder pipeline is deleted. It can be deleted regardless of its operational state. | 1.3.6.1.4.1.2928.2.5.3.1.1.2 | RowStatus | read-create | current |
| vasDecPipeName OBJECT-TYPE A textual name of the decoder pipeline. The name is automatically assigned by the system. The last part of the name is the index in this table. | 1.3.6.1.4.1.2928.2.5.3.1.1.3 | SnmpAdminString | read-only | current |
| vasDecPipePurpose OBJECT-TYPE A text that can describe the purpose of the decoder pipeline. This is for administrative use. | 1.3.6.1.4.1.2928.2.5.3.1.1.4 | SnmpAdminString | read-create | current |
| vasDecPipeAdminStatus OBJECT-TYPE The administrative state of the decoder pipeline. up(1). The decoder pipeline shall be enabled and will allocate the necessary resources. down(2). The decoder pipeline shall be disabled and will not allocate any resources. | 1.3.6.1.4.1.2928.2.5.3.1.1.5 | INTEGER {up(1), down(2)} | read-create | current |
| vasDecPipeOperStatus OBJECT-TYPE The operational state of the decoder pipe. The value normally follow the state of the administrative state. up(1). The decoder pipe is up and operational. down(2). The decoder pipe is not operational, either because its administrative state is down, or because of an error. If it is down because of an error, an alarm should be raised and the vasDecPipeFailure should describe the fault. | 1.3.6.1.4.1.2928.2.5.3.1.1.6 | INTEGER {up(1), down(2)} | read-only | current |
| vasDecPipeFailure OBJECT-TYPE A text describing the configuration or error status of the decoder pipeline. The text is the empty string if the configuration is correct and no error is present, otherwise it contains a message describing the error. | 1.3.6.1.4.1.2928.2.5.3.1.1.7 | SnmpAdminString | read-only | current |
| vasDecPipeLastChanged OBJECT-TYPE The value of sysUpTime when status or configuration of the objects was last changed. | 1.3.6.1.4.1.2928.2.5.3.1.1.8 | TimeStamp | read-only | current |
| vasDecPipeResetStatistics OBJECT-TYPE Resets all statistics counters for the decoder pipe. (Not yet implemented). | 1.3.6.1.4.1.2928.2.5.3.1.1.9 | VasResetStatistics | read-write | current |
| vasDecPipeInputFrom OBJECT-TYPE A reference to the object that shall supply the encoded video stream to the decoder pipe. This could be e.g. a pull or push transport sink in the vasPulSnkTable or vasPusSnkTable, or an encoder pipe in the vasEncPipeTable. The value `.0.0' is used when no input is specified. | 1.3.6.1.4.1.2928.2.5.3.1.1.10 | RowPointer | read-create | current |
| vasDecPipeCipher OBJECT-TYPE A cipher to be used when decrypting the transport stream. | 1.3.6.1.4.1.2928.2.5.3.1.1.11 | VasCipher | read-create | current |
| vasDecPipeDecryptKey OBJECT-TYPE The key to be used when decrypting the transport stream. The key shall be provided as a text with hexadecimal digits presented as lower case characters. | 1.3.6.1.4.1.2928.2.5.3.1.1.12 | SnmpAdminString | read-create | current |
| vasDecPipeProcessedFrames OBJECT-TYPE Running counter of number of decoded frames. | 1.3.6.1.4.1.2928.2.5.3.1.1.13 | Counter32 | read-only | current |
| vasDecPipeCurrentTsBitrate OBJECT-TYPE Current transport stream bitrate in kbps. | 1.3.6.1.4.1.2928.2.5.3.1.1.14 | Unsigned32 | read-only | current |
| vasDecPipeVideoBitrate OBJECT-TYPE Video bitrate after decoding in kbps. | 1.3.6.1.4.1.2928.2.5.3.1.1.15 | Unsigned32 | read-only | current |
| vasTransportsGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2928.2.5.4 | |||
| vasStreamPort OBJECT-TYPE The UDP port number that is used when listening at stream connections requests. | 1.3.6.1.4.1.2928.2.5.4.1 | InetPortNumber | read-write | current |
| vasUdpSrcTable OBJECT-TYPE The conceptual table contains objects that takes a video stream from a sink object and transmits it as a UDP stream from an IP interface. This object is the complement to an object in the vasUdpSnkTable. | 1.3.6.1.4.1.2928.2.5.4.2 | not-accessible | current | |
| vasUdpSrcEntry OBJECT-TYPE An entry in the conceptual table represents one UDP source. | 1.3.6.1.4.1.2928.2.5.4.2.1 | not-accessible | current | |
| vasUdpSrcIndex OBJECT-TYPE An index that uniquely identifies the UDP source in the table. | 1.3.6.1.4.1.2928.2.5.4.2.1.1 | Unsigned32 | not-accessible | current |
| vasUdpSrcRowStatus OBJECT-TYPE See SNMPv2-TC. Use vasUdpSrcAdminStatus to activate and de-activate a UDP source. The following values are supported: active(1). The object always reads active. createAndGo(4). A new conceptual row is created representing a new UDP source. To activate the UDP source, set the administrative state to up(1) after all columnar objects have been set. destroy(6). The UDP source is deleted. It can be deleted regardless of its operational state. | 1.3.6.1.4.1.2928.2.5.4.2.1.2 | RowStatus | read-create | current |
| vasUdpSrcName OBJECT-TYPE A textual name of the UDP source. The name is automatically assigned by the system. The last part of the name is the index in this table. | 1.3.6.1.4.1.2928.2.5.4.2.1.3 | SnmpAdminString | read-only | current |
| vasUdpSrcPurpose OBJECT-TYPE A text that can describe the purpose of the UDP source. This is for administrative use. | 1.3.6.1.4.1.2928.2.5.4.2.1.4 | SnmpAdminString | read-create | current |
| vasUdpSrcAdminStatus OBJECT-TYPE The administrative state of the UDP source. up(1). The UDP source shall be enabled and allocates the necessary resources. down(2). The UDP source shall be disabled and will not allocate any resources. | 1.3.6.1.4.1.2928.2.5.4.2.1.5 | INTEGER {up(1), down(2)} | read-create | current |
| vasUdpSrcOperStatus OBJECT-TYPE The operational state of the UDP source. The value normally follow the state of the administrative state. up(1). The UDP source is up and operational. down(2). The UDP source is not operational, either because its administrative state is down, or because of an error. If it is down because of an error, an alarm should be raised and the vasUdpSrcFailure should describe the fault. | 1.3.6.1.4.1.2928.2.5.4.2.1.6 | INTEGER {up(1), down(2)} | read-only | current |
| vasUdpSrcFailure OBJECT-TYPE A string describing the configuration or error status of the object. The string is the empty string if the configuration is correct and no error is present, otherwise it contains a message describing the error. | 1.3.6.1.4.1.2928.2.5.4.2.1.7 | SnmpAdminString | read-only | current |
| vasUdpSrcLastChanged OBJECT-TYPE The value of sysUpTime when status or configuration of the objects was last changed. | 1.3.6.1.4.1.2928.2.5.4.2.1.8 | TimeStamp | read-only | current |
| vasUdpSrcConnectionStatus OBJECT-TYPE The status of the stream transport connection. | 1.3.6.1.4.1.2928.2.5.4.2.1.9 | VasConnectionStatus | read-only | current |
| vasUdpSrcResetStatistics OBJECT-TYPE Resets all statistics counters for the object. (Not yet implemented). | 1.3.6.1.4.1.2928.2.5.4.2.1.10 | VasResetStatistics | read-write | current |
| vasUdpSrcStatsUdp OBJECT-TYPE Index for an entry in statistics table vasUdpStatisticsTable for this object. | 1.3.6.1.4.1.2928.2.5.4.2.1.11 | Unsigned32 | read-only | current |
| vasUdpSrcInputFrom OBJECT-TYPE A reference to the object that shall supply the video stream to the UDP source. This could be e.g. a pull or push sink in the vasPulSnkTable or vasPusSnkTable, or a UDP sink in the vasUdpSnkTable. The value `.0.0' is used when no input is specified. | 1.3.6.1.4.1.2928.2.5.4.2.1.12 | RowPointer | read-create | current |
| vasUdpSrcRemoteHostType OBJECT-TYPE Describes how vasUdpSrcRemoteHostAddress shall be interpreted. Supported values are `unknown', `ipv4' and `dns'. | 1.3.6.1.4.1.2928.2.5.4.2.1.13 | InetAddressType | read-create | current |
| vasUdpSrcRemoteHostAddress OBJECT-TYPE The IP address or DNS hostname of the remote source that shall provide the UDP stream. | 1.3.6.1.4.1.2928.2.5.4.2.1.14 | InetAddress | read-create | current |
| vasUdpSrcRemotePort OBJECT-TYPE The port number at the remote source that shall provide the UDP stream. | 1.3.6.1.4.1.2928.2.5.4.2.1.15 | InetPortNumber | read-create | current |
| vasUdpSrcLocalIfType OBJECT-TYPE Describes how the vasUdpSrcLocalIfAddress shall be interpreted. Supported value is `ipv4'. | 1.3.6.1.4.1.2928.2.5.4.2.1.16 | InetAddressType | read-create | current |
| vasUdpSrcLocalIfAddress OBJECT-TYPE The IP address of a local interface (NIC) that shall be used as input for the video stream. If any interface can be used, set the IPv4 address 0.0.0.0. | 1.3.6.1.4.1.2928.2.5.4.2.1.17 | InetAddress | read-create | current |
| vasUdpSrcLocalPort OBJECT-TYPE The local UPD port number. Use 0 for any port. | 1.3.6.1.4.1.2928.2.5.4.2.1.18 | InetPortNumber | read-create | current |
| vasUdpSrcCipher OBJECT-TYPE The cipher to use for encrypting the UDP video stream. | 1.3.6.1.4.1.2928.2.5.4.2.1.19 | VasCipher | read-create | current |
| vasUdpSrcDecryptKey OBJECT-TYPE The key to be used when encrypting the UDP video stream. The key shall be provided as a text with hexadecimal digits presented as lower case characters. | 1.3.6.1.4.1.2928.2.5.4.2.1.20 | SnmpAdminString | read-create | current |
| vasUdpSrcTtl OBJECT-TYPE TTL, the Time to Live (hop limit) for the UDP/IP datagram. | 1.3.6.1.4.1.2928.2.5.4.2.1.21 | Unsigned32 (1..255) | read-create | current |
| vasUdpSrcDontFragment OBJECT-TYPE The Don't Fragment (DF) flag on the IP packet. When set, then if fragmentation would be required to route a packet, the packet is dropped instead. | 1.3.6.1.4.1.2928.2.5.4.2.1.22 | TruthValue | read-create | current |
| vasUdpSnkTable OBJECT-TYPE The conceptual table contains objects that receives a UDP video stream on an IP interface and provides it as an input to another source object. | 1.3.6.1.4.1.2928.2.5.4.3 | not-accessible | current | |
| vasUdpSnkEntry OBJECT-TYPE An entry in the conceptual table represents one UDP sink. | 1.3.6.1.4.1.2928.2.5.4.3.1 | not-accessible | current | |
| vasUdpSnkIndex OBJECT-TYPE An index that uniquely identifies the UDP sink in the table. | 1.3.6.1.4.1.2928.2.5.4.3.1.1 | Unsigned32 | not-accessible | current |
| vasUdpSnkRowStatus OBJECT-TYPE See SNMPv2-TC. Use vasUdpSnkAdminStatus to activate and de-activate a UDP source. The following values are supported: active(1). The object always reads active. createAndGo(4). A new conceptual row is created representing a new UDP sink. To activate the UDP sink, set the administrative state to up(1) after all columnar objects have been set. destroy(6). The UDP sink is deleted. It can be deleted regardless of its operational state. | 1.3.6.1.4.1.2928.2.5.4.3.1.2 | RowStatus | read-create | current |
| vasUdpSnkName OBJECT-TYPE A textual name of the UDP sink. The name is automatically assigned by the system. The last part of the name is the index in this table. | 1.3.6.1.4.1.2928.2.5.4.3.1.3 | SnmpAdminString | read-only | current |
| vasUdpSnkPurpose OBJECT-TYPE A text that can describe the purpose of the UDP sink. This is for administrative use. | 1.3.6.1.4.1.2928.2.5.4.3.1.4 | SnmpAdminString | read-create | current |
| vasUdpSnkAdminStatus OBJECT-TYPE The administrative state of the UDP sink. up(1). The UDP sink shall be enabled and allocates the necessary resources. down(2). The UDP sink shall be disabled and will not allocate any resources. | 1.3.6.1.4.1.2928.2.5.4.3.1.5 | INTEGER {up(1), down(2)} | read-create | current |
| vasUdpSnkOperStatus OBJECT-TYPE The operational state of the UDP sink. The value normally follow the state of the administrative state. up(1). The UDP sink is up and operational. down(2). The UDP sink is not operational, either because its administrative state is down, or because of an error. If it is down because of an error, an alarm should be raised and the vasUdpSnkFailure should describe the fault. | 1.3.6.1.4.1.2928.2.5.4.3.1.6 | INTEGER {up(1), down(2)} | read-only | current |
| vasUdpSnkFailure OBJECT-TYPE A string describing the configuration or error status of the object. The string is the empty string if the configuration is correct and no error is present, otherwise it contains a message describing the error. | 1.3.6.1.4.1.2928.2.5.4.3.1.7 | SnmpAdminString | read-only | current |
| vasUdpSnkLastChanged OBJECT-TYPE The value of sysUpTime when status or configuration of the objects was last changed. | 1.3.6.1.4.1.2928.2.5.4.3.1.8 | TimeStamp | read-only | current |
| vasUdpSnkConnectionStatus OBJECT-TYPE The status of the stream transport connection. | 1.3.6.1.4.1.2928.2.5.4.3.1.9 | VasConnectionStatus | read-only | current |
| vasUdpSnkResetStatistics OBJECT-TYPE Resets all statistics counters for the object. (Not yet implemented). | 1.3.6.1.4.1.2928.2.5.4.3.1.10 | VasResetStatistics | read-create | current |
| vasUdpSnkStatsUdp OBJECT-TYPE Index for an entry in statistics table vasUdpStatisticsTable for this object. | 1.3.6.1.4.1.2928.2.5.4.3.1.11 | Unsigned32 | read-only | current |
| vasUdpSnkStatsTr101 OBJECT-TYPE Index for an entry in ETSI TR 101 290 statistics table for this object. (The table is not yet defined). | 1.3.6.1.4.1.2928.2.5.4.3.1.12 | Unsigned32 | read-only | current |
| vasUdpSnkEnableTr101 OBJECT-TYPE Enables or disables ETSI TR 101 290 statistics collection. | 1.3.6.1.4.1.2928.2.5.4.3.1.13 | TruthValue | read-create | current |
| vasUdpSnkRemoteInetType OBJECT-TYPE Describes the format of vasUdpSnkRemoteInetAddress. | 1.3.6.1.4.1.2928.2.5.4.3.1.14 | InetAddressType | read-only | current |
| vasUdpSnkRemoteInetAddress OBJECT-TYPE The IP address of the remote host from where the UDP stream is being received. The value is empty and vasUdpSnkRemoteInetType is `unknown' when a stream is not received. | 1.3.6.1.4.1.2928.2.5.4.3.1.15 | InetAddress | read-only | current |
| vasUdpSnkLocalIfType OBJECT-TYPE Describes how the vasUdpSnkLocalIfAddress shall be interpreted. Supported value is `ipv4'. | 1.3.6.1.4.1.2928.2.5.4.3.1.16 | InetAddressType | read-create | current |
| vasUdpSnkLocalIfAddress OBJECT-TYPE The IP address of a local interface (NIC) that shall be used as input for the video stream. If any interface can be used, set the IPv4 address 0.0.0.0. | 1.3.6.1.4.1.2928.2.5.4.3.1.17 | InetAddress | read-create | current |
| vasUdpSnkLocalPort OBJECT-TYPE The local UDP port that shall be used for input. | 1.3.6.1.4.1.2928.2.5.4.3.1.18 | InetPortNumber | read-create | current |
| vasUdpSnkCipher OBJECT-TYPE The cipher that shall be used for decrypting the received UDP video stream. | 1.3.6.1.4.1.2928.2.5.4.3.1.19 | VasCipher | read-create | current |
| vasUdpSnkEncryptKey OBJECT-TYPE The key to be used when decrypting the UDP video stream. The key shall be provided as a text with hexadecimal digits presented as lower case characters. | 1.3.6.1.4.1.2928.2.5.4.3.1.20 | SnmpAdminString | read-create | current |
| vasUdpSnkMcastIpType OBJECT-TYPE The format of vasUdpSnkMcastIp and vasUdpSnkSsmSourceIp. Supported values are `unknown' and `ipv4'. | 1.3.6.1.4.1.2928.2.5.4.3.1.21 | InetAddressType | read-create | current |
| vasUdpSnkMcastIp OBJECT-TYPE The multicast IP address if joining a multicast UDP stream. Set empty and vasUdpSnkMcastIpType to `unknown' if not multicast. | 1.3.6.1.4.1.2928.2.5.4.3.1.22 | InetAddress | read-create | current |
| vasUdpSnkSsmSourceIp OBJECT-TYPE The source address if source-specific multicast (SSM) shall be used. Set to empty and vasUdpSnkMcastIpType to `unknown' if multicast shall not be used, or all-zero (0.0.0.0) if multicast but where SSM shall not be used. | 1.3.6.1.4.1.2928.2.5.4.3.1.23 | InetAddress | read-create | current |
| vasUdpSnkCompress OBJECT-TYPE Removes null-packets in an MPEG transport stream. | 1.3.6.1.4.1.2928.2.5.4.3.1.24 | TruthValue | read-create | current |
| vasPulSrcTable OBJECT-TYPE The conceptual table contains objects that represent the source (sender) in a pull transport, i.e. a transport of a stream that is initiated from the sink side, where the stream is pulled from the source to the sink at the sink. | 1.3.6.1.4.1.2928.2.5.4.4 | not-accessible | current | |
| vasPulSrcEntry OBJECT-TYPE An entry in the conceptual table represents one pull source object. | 1.3.6.1.4.1.2928.2.5.4.4.1 | not-accessible | current | |
| vasPulSrcIndex OBJECT-TYPE An index that uniquely identifies the pull source in the table. | 1.3.6.1.4.1.2928.2.5.4.4.1.1 | Unsigned32 | not-accessible | current |
| vasPulSrcRowStatus OBJECT-TYPE See SNMPv2-TC. Use vasPulSrcAdminStatus to activate and de-activate a Pull source. The following values are supported: active(1). The object always reads active. createAndGo(4). A new conceptual row is created representing a new Pull source. To activate the Pull source, set the administrative state to up(1) after all columnar objects have been set. destroy(6). The Pull source is deleted. It can be deleted regardless of its operational state. | 1.3.6.1.4.1.2928.2.5.4.4.1.2 | RowStatus | read-create | current |
| vasPulSrcName OBJECT-TYPE A textual name of the Pull source. The name is automatically assigned by the system. The last part of the name is the index in this table. | 1.3.6.1.4.1.2928.2.5.4.4.1.3 | SnmpAdminString | read-only | current |
| vasPulSrcPurpose OBJECT-TYPE A text that can describe the purpose of the Pull source. This is for administrative use. | 1.3.6.1.4.1.2928.2.5.4.4.1.4 | SnmpAdminString | read-create | current |
| vasPulSrcAdminStatus OBJECT-TYPE The administrative state of the Pull source. The value controls the desired state of the Pull source. up(1). The Pull source shall be enabled. down(2). The Pull source shall be disabled. | 1.3.6.1.4.1.2928.2.5.4.4.1.5 | INTEGER {up(1), down(2)} | read-create | current |
| vasPulSrcOperStatus OBJECT-TYPE The operational state of the Pull source. The value normally follow the state of the administrative state. up(1). The Pull source is up and operational. down(2). The Pull source is not operational, either because its administrative state is down, or because of an error. If it is down because of an error, an alarm should be raised and the vasPulSrcFailure should describe the fault. | 1.3.6.1.4.1.2928.2.5.4.4.1.6 | INTEGER {up(1), down(2), dormant(3), partial(4)} | read-only | current |
| vasPulSrcFailure OBJECT-TYPE A string describing the configuration or error status of the object. The string is the empty string if the configuration is correct and no error is present, otherwise it contains a message describing the error. | 1.3.6.1.4.1.2928.2.5.4.4.1.7 | SnmpAdminString | read-only | current |
| vasPulSrcLastChanged OBJECT-TYPE The value of sysUpTime when status or configuration of the objects was last changed. | 1.3.6.1.4.1.2928.2.5.4.4.1.8 | TimeStamp | read-only | current |
| vasPulSrcConnectionStatus OBJECT-TYPE The status of the stream transport connection. | 1.3.6.1.4.1.2928.2.5.4.4.1.9 | VasConnectionStatus | read-only | current |
| vasPulSrcResetStatistics OBJECT-TYPE Resets all statistics counters for the object. (Not yet implemented). | 1.3.6.1.4.1.2928.2.5.4.4.1.10 | VasResetStatistics | read-write | current |
| vasPulSrcStatsTrsp OBJECT-TYPE Index for an entry in statistics vasTrspStatisticsTable table for this object. | 1.3.6.1.4.1.2928.2.5.4.4.1.11 | Unsigned32 | read-only | current |
| vasPulSrcRemoteInetType OBJECT-TYPE Format of vasPulSrcRemoteInetAddress. | 1.3.6.1.4.1.2928.2.5.4.4.1.12 | InetAddressType | read-only | current |
| vasPulSrcRemoteInetAddress OBJECT-TYPE The IP address of the remote host to where the transport stream is being sent. The value is empty and vasPulSrcRemoteInetType is `unknown' when a stream is not sent. | 1.3.6.1.4.1.2928.2.5.4.4.1.13 | InetAddress | read-only | current |
| vasPulSrcStreamId OBJECT-TYPE Assigns the stream ID to a transport stream. The stream ID is a string that identifies the transport stream in all nodes where the stream exists. This must be unique within a node for any given transport stream. | 1.3.6.1.4.1.2928.2.5.4.4.1.14 | SnmpAdminString | read-create | current |
| vasPulSrcInputFrom OBJECT-TYPE A reference to the object that shall supply the video stream to the pull source. This could be e.g. an encoder pipeline in the vasEncPipeTable or a UDP sink in the vasUdpSnkTable. The value `.0.0' is used when no input is specified. | 1.3.6.1.4.1.2928.2.5.4.4.1.15 | RowPointer | read-create | current |
| vasPulSrcRemoteId OBJECT-TYPE The remote ID is the assigned to the remote host where the transport stream is received. This is used for compatibility with nodes that does not implement this MIB. A node that implements this MIB is assigned the default value `nimbrava'. | 1.3.6.1.4.1.2928.2.5.4.4.1.16 | SnmpAdminString | read-create | current |
| vasPulSrcPassword OBJECT-TYPE A password used for the transport stream. The vasPulSnkPassword on the sink at the remote host must match. | 1.3.6.1.4.1.2928.2.5.4.4.1.17 | SnmpAdminString | read-create | current |
| vasMpuSrcTable OBJECT-TYPE The conceptual table contains objects that represent the source (sender) of pull transports, where multiple transports to different destinations may be setup from the same source. | 1.3.6.1.4.1.2928.2.5.4.5 | not-accessible | current | |
| vasMpuSrcEntry OBJECT-TYPE An entry in the conceptual table represents one multiple pull source object. | 1.3.6.1.4.1.2928.2.5.4.5.1 | not-accessible | current | |
| vasMpuSrcIndex OBJECT-TYPE An index that uniquely identifies the multiple pull source in the table. | 1.3.6.1.4.1.2928.2.5.4.5.1.1 | Unsigned32 | not-accessible | current |
| vasMpuSrcRowStatus OBJECT-TYPE See SNMPv2-TC. Use vasMpuSrcAdminStatus to activate and de-activate an Multiple pull source. The following values are supported: active(1). The object always reads active. createAndGo(4). A new conceptual row is created representing a new Multiple pull source. To activate the encoder pipeline, set the administrative state to up(1) after all columnar objects have been set. destroy(6). The Multiple pull source is deleted. It can be deleted regardless of its operational state. | 1.3.6.1.4.1.2928.2.5.4.5.1.2 | RowStatus | read-create | current |
| vasMpuSrcName OBJECT-TYPE A textual name of the Multiple pull source. The name is automatically assigned by the system. The last part of the name is the index in this table. | 1.3.6.1.4.1.2928.2.5.4.5.1.3 | SnmpAdminString | read-only | current |
| vasMpuSrcPurpose OBJECT-TYPE A text that can describe the purpose of the Multiple pull source. This is for administrative use. | 1.3.6.1.4.1.2928.2.5.4.5.1.4 | SnmpAdminString | read-create | current |
| vasMpuSrcAdminStatus OBJECT-TYPE The administrative state of the Multiple pull source. The value controls the desired state of the Multiple pull source. up(1). The Multiple pull source shall be enabled. down(2). The Multiple pull source shall be disabled. | 1.3.6.1.4.1.2928.2.5.4.5.1.5 | INTEGER {up(1), down(2)} | read-create | current |
| vasMpuSrcOperStatus OBJECT-TYPE The operational state of the Multiple Pull source. The value normally follow the state of the administrative state. up(1). The Multiple pull source is up and operational. down(2). The Multiple pull source is not operational, either because its administrative state is down, or because of an error. If it is down because of an error, an alarm should be raised and the vasMpuSrcFailure should describe the fault. | 1.3.6.1.4.1.2928.2.5.4.5.1.6 | INTEGER {up(1), down(2), dormant(3), partial(4)} | read-only | current |
| vasMpuSrcFailure OBJECT-TYPE A string describing the configuration or error status of the object. The string is the empty string if the configuration is correct and no error is present, otherwise it contains a message describing the error. | 1.3.6.1.4.1.2928.2.5.4.5.1.7 | SnmpAdminString | read-only | current |
| vasMpuSrcLastChanged OBJECT-TYPE The value of sysUpTime when status or configuration of the objects was last changed. | 1.3.6.1.4.1.2928.2.5.4.5.1.8 | TimeStamp | read-only | current |
| vasMpuSrcStreamId OBJECT-TYPE Assigns the stream ID to a transport stream. The stream ID is a string that identifies the transport stream in all nodes where the stream exists. This must be unique within a node for any given transport stream. | 1.3.6.1.4.1.2928.2.5.4.5.1.12 | SnmpAdminString | read-create | current |
| vasMpuSrcInputFrom OBJECT-TYPE A reference to the object that shall supply the video stream to the multiple pull source. This could be e.g. an encoder pipeline on the vasEncPipeTable or a UDP sink in the vasUdpSnkTable. The value `.0.0' is used when no input is specified. | 1.3.6.1.4.1.2928.2.5.4.5.1.13 | RowPointer | read-create | current |
| vasPulSnkTable OBJECT-TYPE The conceptual table contains objects that represent the sink (receiver) of a pull transport, i.e. a transport of a stream that is initiated at the sink side, where the stream is pulled from the source to the sink at the sink. | 1.3.6.1.4.1.2928.2.5.4.6 | not-accessible | current | |
| vasPulSnkEntry OBJECT-TYPE An entry in the conceptual table represents one pull sink object. | 1.3.6.1.4.1.2928.2.5.4.6.1 | not-accessible | current | |
| vasPulSnkIndex OBJECT-TYPE An index that uniquely identifies the pull sink in the table. | 1.3.6.1.4.1.2928.2.5.4.6.1.1 | Unsigned32 | not-accessible | current |
| vasPulSnkRowStatus OBJECT-TYPE See SNMPv2-TC. Use vasPulSnkAdminStatus to activate and de-activate a Pull sink. The following values are supported: active(1). The object always reads active. createAndGo(4). A new conceptual row is created representing a new Pull sink. To activate the Pull sink, set the administrative state to up(1) after all columnar objects have been set. destroy(6). The Pull sink is deleted. It can be deleted regardless of its operational state. | 1.3.6.1.4.1.2928.2.5.4.6.1.2 | RowStatus | read-create | current |
| vasPulSnkName OBJECT-TYPE A textual name of the Pull sink. The name is automatically assigned by the system. The last part of the name is the index in this table. | 1.3.6.1.4.1.2928.2.5.4.6.1.3 | SnmpAdminString | read-only | current |
| vasPulSnkPurpose OBJECT-TYPE A text that can describe the purpose of the Pull sink. This is for administrative use. | 1.3.6.1.4.1.2928.2.5.4.6.1.4 | SnmpAdminString | read-create | current |
| vasPulSnkAdminStatus OBJECT-TYPE The administrative state of the Pull sink. The value controls the desired state of the Pull sink. up(1). The Pull sink shall be enabled. down(2). The Pull sink shall be disabled. | 1.3.6.1.4.1.2928.2.5.4.6.1.5 | INTEGER {up(1), down(2)} | read-create | current |
| vasPulSnkOperStatus OBJECT-TYPE The operational state of the Pull sink. The value normally follow the state of the administrative state. up(1). The Pull sink is up and operational. down(2). The Pull sink is not operational, either because its administrative state is down, or because of an error. If it is down because of an error, an alarm should be raised and the vasPulSnkFailure should describe the fault. | 1.3.6.1.4.1.2928.2.5.4.6.1.6 | INTEGER {up(1), down(2)} | read-only | current |
| vasPulSnkFailure OBJECT-TYPE A string describing the configuration or error status of the object. The string is the empty string if the configuration is correct and no error is present, otherwise it contains a message describing the error. | 1.3.6.1.4.1.2928.2.5.4.6.1.7 | SnmpAdminString | read-only | current |
| vasPulSnkLastChanged OBJECT-TYPE The value of sysUpTime when status or configuration of the objects was last changed. | 1.3.6.1.4.1.2928.2.5.4.6.1.8 | TimeStamp | read-only | current |
| vasPulSnkConnectionStatus OBJECT-TYPE The status of the stream transport connection. | 1.3.6.1.4.1.2928.2.5.4.6.1.9 | VasConnectionStatus | read-only | current |
| vasPulSnkResetStatistics OBJECT-TYPE Resets all statistics counters for the object. (Not yet implemented). | 1.3.6.1.4.1.2928.2.5.4.6.1.10 | VasResetStatistics | read-write | current |
| vasPulSnkStatsTrsp OBJECT-TYPE Index for an entry in statistics vasTrspStatisticsTable table for this object. | 1.3.6.1.4.1.2928.2.5.4.6.1.11 | Unsigned32 | read-only | current |
| vasPulSnkStatsTr101 OBJECT-TYPE Index for an entry in ETSI TR 101 290 statistics table for this object. (The table is not yet defined). | 1.3.6.1.4.1.2928.2.5.4.6.1.12 | Unsigned32 | read-only | current |
| vasPulSnkEnableTr101 OBJECT-TYPE Enables or disables ETSI TR 101 290 statistics collection. | 1.3.6.1.4.1.2928.2.5.4.6.1.13 | TruthValue | read-create | current |
| vasPulSnkRemoteInetType OBJECT-TYPE Format of vasPulSrcRemoteInetAddress. | 1.3.6.1.4.1.2928.2.5.4.6.1.14 | InetAddressType | read-only | current |
| vasPulSnkRemoteInetAddress OBJECT-TYPE The IP address of the remote host from where the transport stream is received. The value is empty and vasPulSnkRemoteInetType is `unknown' when a stream is not received. | 1.3.6.1.4.1.2928.2.5.4.6.1.15 | InetAddress | read-only | current |
| vasPulSnkStreamId OBJECT-TYPE Specifies the stream ID of the stream on the remote host that shall be received. The stream ID is a string that identifies the transport stream in all nodes where the stream exists. This must be unique within a node for any given transport stream. | 1.3.6.1.4.1.2928.2.5.4.6.1.16 | SnmpAdminString | read-create | current |
| vasPulSnkPassword OBJECT-TYPE The password to use for the received transport stream. The password must match the vasPulSrcPassword set on the source at the remote host. | 1.3.6.1.4.1.2928.2.5.4.6.1.17 | SnmpAdminString | read-create | current |
| vasPulSnkRemoteHostType OBJECT-TYPE Format of vasPulSnkRemoteHostAddress. Supported values are `unknown', `ipv4', and `dns'. | 1.3.6.1.4.1.2928.2.5.4.6.1.18 | InetAddressType | read-create | current |
| vasPulSnkRemoteHostAddress OBJECT-TYPE The IP address or DNS hostname of the remote host from where the transport stream shall be pulled. This address is the first host that will be attempted when a transport stream is to be established. | 1.3.6.1.4.1.2928.2.5.4.6.1.19 | InetAddress | read-create | current |
| vasPulSnkRemoteHostType2 OBJECT-TYPE Format of vasPulSnkRemoteHostAddress2. Supported values are `unknown', `ipv4', and `dns'. | 1.3.6.1.4.1.2928.2.5.4.6.1.20 | InetAddressType | read-create | current |
| vasPulSnkRemoteHostAddress2 OBJECT-TYPE The second IP address or DNS hostname of the remote host from where the transport stream shall be pulled. When using two addresses, then the transport is setup with two alternative sources. This is a second host that will be attempted if connection to the first host fails when a transport stream is to be established. If a second host shall not be used, then the value shall be empty and the vasPulSnkRemoteHostType shall be `unknown'. | 1.3.6.1.4.1.2928.2.5.4.6.1.21 | InetAddress | read-create | current |
| vasPulSnkRemotePort OBJECT-TYPE The UDP port on the remote host that the remote host is listening for connection attempts. See vaStreamPort. | 1.3.6.1.4.1.2928.2.5.4.6.1.22 | InetPortNumber | read-create | current |
| vasPulSnkRetransmitBuffer OBJECT-TYPE The size of the retransmission buffer in milliseconds (ms). The retransmission buffer setting adds bandwidth on the sender side to compensate for packet loss. The setting will affect the allowed maximum bitrate. | 1.3.6.1.4.1.2928.2.5.4.6.1.23 | Unsigned32 (0..30000) | read-create | current |
| vasPulSnkFecMaxOverhead OBJECT-TYPE The Forward Error Correction (FEC) overhead in percent (%) of the original stream bit rate. FEC increases the streams tolerance of burst errors and corrects for single errors, as long as they are not clustered, but at the cost of increased latency and is therefore not always desirable. | 1.3.6.1.4.1.2928.2.5.4.6.1.24 | Unsigned32 (0..100) | read-create | current |
| vasPulSnkFecOptimize OBJECT-TYPE Whether to automatically optimize Forward Error Correction (FEC). Optimization will favor the video stream and visually important frames, I and IDR-frames, over others, such as audio. Thereby lowering latency. | 1.3.6.1.4.1.2928.2.5.4.6.1.25 | TruthValue | read-create | current |
| vasPulSnkFecLatency OBJECT-TYPE Forward Error Correction (FEC) block size in milliseconds (ms). | 1.3.6.1.4.1.2928.2.5.4.6.1.26 | Unsigned32 | read-create | current |
| vasPusSrcTable OBJECT-TYPE The conceptual table contains objects that represent the source (sender) of a push transport, i.e. a transport that is initiated from the source side, and is pushed from the source to the sink at the source. | 1.3.6.1.4.1.2928.2.5.4.7 | not-accessible | current | |
| vasPusSrcEntry OBJECT-TYPE An entry in the conceptual table represents one push source object. | 1.3.6.1.4.1.2928.2.5.4.7.1 | not-accessible | current | |
| vasPusSrcIndex OBJECT-TYPE An index that uniquely identifies the push source in the table. | 1.3.6.1.4.1.2928.2.5.4.7.1.1 | Unsigned32 | not-accessible | current |
| vasPusSrcRowStatus OBJECT-TYPE See SNMPv2-TC. Use vasPusSrcAdminStatus to activate and de-activate an Push source. The following values are supported: active(1). The object always reads active. createAndGo(4). A new conceptual row is created representing a new Push source. To activate the Push source, set the administrative state to up(1) after all columnar objects have been set. destroy(6). The Push source is deleted. It can be deleted regardless of its operational state. | 1.3.6.1.4.1.2928.2.5.4.7.1.2 | RowStatus | read-create | current |
| vasPusSrcName OBJECT-TYPE A textual name of the Push source. The name is automatically assigned by the system. The last part of the name is the index in this table. | 1.3.6.1.4.1.2928.2.5.4.7.1.3 | SnmpAdminString | read-only | current |
| vasPusSrcPurpose OBJECT-TYPE A text that can describe the purpose of the Push source. This is for administrative use. | 1.3.6.1.4.1.2928.2.5.4.7.1.4 | SnmpAdminString | read-create | current |
| vasPusSrcAdminStatus OBJECT-TYPE The administrative state of the Push source. The value controls the desired state of the Push source. up(1). The Push source shall be enabled. down(2). The Push source shall be disabled. | 1.3.6.1.4.1.2928.2.5.4.7.1.5 | INTEGER {up(1), down(2)} | read-create | current |
| vasPusSrcOperStatus OBJECT-TYPE The operational state of the Push source. The value normally follow the state of the administrative state. up(1). The Push source is up and operational. down(2). The Push source is not operational, either because its administrative state is down, or because of an error. If it is down because of an error, an alarm should be raised and the vasPusSrcFailure should describe the fault. | 1.3.6.1.4.1.2928.2.5.4.7.1.6 | INTEGER {up(1), down(2)} | read-only | current |
| vasPusSrcFailure OBJECT-TYPE A string describing the configuration or error status of the object. The string is the empty string if the configuration is correct and no error is present, otherwise it contains a message describing the error. | 1.3.6.1.4.1.2928.2.5.4.7.1.7 | SnmpAdminString | read-only | current |
| vasPusSrcLastChanged OBJECT-TYPE The value of sysUpTime when status or configuration of the objects was last changed. | 1.3.6.1.4.1.2928.2.5.4.7.1.8 | TimeStamp | read-only | current |
| vasPusSrcConnectionStatus OBJECT-TYPE The status of the stream transport connection. | 1.3.6.1.4.1.2928.2.5.4.7.1.9 | VasConnectionStatus | read-only | current |
| vasPusSrcResetStatistics OBJECT-TYPE Resets all statistics counters for the object. (Not yet implemented). | 1.3.6.1.4.1.2928.2.5.4.7.1.10 | VasResetStatistics | read-write | current |
| vasPusSrcStatsTrsp OBJECT-TYPE Index for an entry in statistics vasTrspStatisticsTable table for this object. | 1.3.6.1.4.1.2928.2.5.4.7.1.11 | Unsigned32 | read-only | current |
| vasPusSrcRemoteInetType OBJECT-TYPE Format of vasPusSrcRemoteInetAddress. | 1.3.6.1.4.1.2928.2.5.4.7.1.12 | InetAddressType | read-only | current |
| vasPusSrcRemoteInetAddress OBJECT-TYPE The IP address of the remote host to where the transport stream is being sent. The value is empty and vasPusSrcRemoteInetType is `unknown' when a stream is not sent. | 1.3.6.1.4.1.2928.2.5.4.7.1.13 | InetAddress | read-only | current |
| vasPusSrcStreamId OBJECT-TYPE Assigns the stream ID to a transport stream. The stream ID is a string that identifies the transport stream in all nodes where the stream exists. This must be unique within a node for any given transport stream. | 1.3.6.1.4.1.2928.2.5.4.7.1.14 | SnmpAdminString | read-create | current |
| vasPusSrcInputFrom OBJECT-TYPE A reference to the object that shall supply the encoded video stream to the push source. This could be e.g. encoder pipeline in the vasEncPipeTable or a UDP sink in the vasUdpSnkTable. The value `.0.0' is used when no input is specified. | 1.3.6.1.4.1.2928.2.5.4.7.1.15 | RowPointer | read-create | current |
| vasPusSrcPassword OBJECT-TYPE A password used for the transport stream. The vasPusSnkPassword on the sink at the remote host must match. | 1.3.6.1.4.1.2928.2.5.4.7.1.16 | SnmpAdminString | read-create | current |
| vasPusSrcRemoteHostType OBJECT-TYPE Format of vasPusSrcRemoteHostAddress. Supported values are `unknown', `ipv4' and `dns'. | 1.3.6.1.4.1.2928.2.5.4.7.1.17 | InetAddressType | read-create | current |
| vasPusSrcRemoteHostAddress OBJECT-TYPE The IP address or DNS hostname of the remote host to where the transport stream shall be pushed. This address is the first host that will be attempted when a transport stream is to be established. | 1.3.6.1.4.1.2928.2.5.4.7.1.18 | InetAddress | read-create | current |
| vasPusSrcRemoteHostType2 OBJECT-TYPE Format of vasPusSrcRemoteHostAddress2. Supported values are `unknown', `ipv4' and `dns'. | 1.3.6.1.4.1.2928.2.5.4.7.1.19 | InetAddressType | read-create | current |
| vasPusSrcRemoteHostAddress2 OBJECT-TYPE The second IP address or DNS hostname of the remote host to where the transport stream shall be pushed. This is a second host that will be attempted if connection to the first host fails when a transport stream is to be established. When using two addresses, the transport is setup to two alternative destinations. If a second host shall not be used, then the the value shall be empty and the vasPusSrcRemoteType2 shall be `unknown'. | 1.3.6.1.4.1.2928.2.5.4.7.1.20 | InetAddress | read-create | current |
| vasPusSrcRemotePort OBJECT-TYPE The UDP port number on the remote host that the remote host is listening for connection attempts. See vaStreamPort. | 1.3.6.1.4.1.2928.2.5.4.7.1.21 | InetPortNumber | read-create | current |
| vasPusSrcLocalIfType OBJECT-TYPE Describes how the vasPusSrcLocalIfAddress shall be interpreted. Supported value is `ipv4'. | 1.3.6.1.4.1.2928.2.5.4.7.1.22 | InetAddressType | read-create | current |
| vasPusSrcLocalIfAddress OBJECT-TYPE The IP address of a local interface (NIC) that shall be used as output for the video stream. If any interface can be used, set the IPv4 address 0.0.0.0. | 1.3.6.1.4.1.2928.2.5.4.7.1.23 | InetAddress | read-create | current |
| vasPusSrcRetransmitBuffer OBJECT-TYPE The size of the retransmission buffer in milliseconds (ms). The retransmission buffer setting adds bandwidth on the sender side to compensate for packet loss. The setting will affect the allowed maximum bitrate. | 1.3.6.1.4.1.2928.2.5.4.7.1.24 | Unsigned32 (0..30000) | read-create | current |
| vasPusSrcFecMaxOverhead OBJECT-TYPE The Forward Error Correction (FEC) overhead in percent (%) of the original stream bit rate. FEC increases the streams tolerance of burst errors and corrects for single errors, as long as they are not clustered, but at the cost of increased latency and is therefore not always desirable. | 1.3.6.1.4.1.2928.2.5.4.7.1.25 | Unsigned32 (0..100) | read-create | current |
| vasPusSrcFecOptimize OBJECT-TYPE Whether to automatically optimize Forward Error Correction (FEC). Optimization will favor the video stream and visually important frames, I and IDR-frames, over others, such as audio. Thereby lowering latency. | 1.3.6.1.4.1.2928.2.5.4.7.1.26 | TruthValue | read-create | current |
| vasPusSrcFecLatency OBJECT-TYPE Forward Error Correction (FEC) block size in milliseconds (ms). | 1.3.6.1.4.1.2928.2.5.4.7.1.27 | Unsigned32 | read-create | current |
| vasPusSnkTable OBJECT-TYPE The conceptual table contains objects that represent the sink (receiver) of a push transport, i.e. a transport that is initiated from the source side, and is pushed from the source to the sink at the source. | 1.3.6.1.4.1.2928.2.5.4.8 | not-accessible | current | |
| vasPusSnkEntry OBJECT-TYPE An entry in the conceptual table represents one push sink object. | 1.3.6.1.4.1.2928.2.5.4.8.1 | not-accessible | current | |
| vasPusSnkIndex OBJECT-TYPE An index that uniquely identifies the push sink in the table. | 1.3.6.1.4.1.2928.2.5.4.8.1.1 | Unsigned32 | not-accessible | current |
| vasPusSnkRowStatus OBJECT-TYPE See SNMPv2-TC. Use vasPusSnkAdminStatus to activate and de-activate an Push sink. The following values are supported: active(1). The object always reads active. createAndGo(4). A new conceptual row is created representing a new Push sink. To activate the Push sink, set the administrative state to up(1) after all columnar objects have been set. destroy(6). The Push sink is deleted. It can be deleted regardless of its operational state. | 1.3.6.1.4.1.2928.2.5.4.8.1.2 | RowStatus | read-create | current |
| vasPusSnkName OBJECT-TYPE A textual name of the Push sink. The name is automatically assigned by the system. The last part of the name is the index in this table. | 1.3.6.1.4.1.2928.2.5.4.8.1.3 | SnmpAdminString | read-only | current |
| vasPusSnkPurpose OBJECT-TYPE A text that can describe the purpose of the Push sink. This is for administrative use. | 1.3.6.1.4.1.2928.2.5.4.8.1.4 | SnmpAdminString | read-create | current |
| vasPusSnkAdminStatus OBJECT-TYPE The administrative state of the Push sink. The value controls the desired state of the Push sink. up(1). The Push sink shall be enabled. down(2). The Push sink shall be disabled. | 1.3.6.1.4.1.2928.2.5.4.8.1.5 | INTEGER {up(1), down(2)} | read-create | current |
| vasPusSnkOperStatus OBJECT-TYPE The operational state of the Push sink. The value normally follow the state of the administrative state. up(1). The Push sink is up and operational. down(2). The Push sink is not operational, either because its administrative state is down, or because of an error. If it is down because of an error, an alarm should be raised and the vasPusSnkFailure should describe the fault. | 1.3.6.1.4.1.2928.2.5.4.8.1.6 | INTEGER {up(1), down(2)} | read-only | current |
| vasPusSnkFailure OBJECT-TYPE A string describing the configuration or error status of the object. The string is the empty string if the configuration is correct and no error is present, otherwise it contains a message describing the error. | 1.3.6.1.4.1.2928.2.5.4.8.1.7 | SnmpAdminString | read-only | current |
| vasPusSnkLastChanged OBJECT-TYPE The value of sysUpTime when status or configuration of the objects was last changed. | 1.3.6.1.4.1.2928.2.5.4.8.1.8 | TimeStamp | read-only | current |
| vasPusSnkConnectionStatus OBJECT-TYPE The status of the stream transport connection. | 1.3.6.1.4.1.2928.2.5.4.8.1.9 | VasConnectionStatus | read-only | current |
| vasPusSnkResetStatistics OBJECT-TYPE Resets all statistics counters for the object. (Not yet implemented). | 1.3.6.1.4.1.2928.2.5.4.8.1.10 | VasResetStatistics | read-write | current |
| vasPusSnkStatsTrsp OBJECT-TYPE Index for an entry in statistics vasTrspStatisticsTable table for this object. | 1.3.6.1.4.1.2928.2.5.4.8.1.11 | Unsigned32 | read-only | current |
| vasPusSnkStatsTr101 OBJECT-TYPE Index for an entry in ETSI TR 101 290 statistics table for this object. (The table is not yet defined). | 1.3.6.1.4.1.2928.2.5.4.8.1.12 | Unsigned32 | read-only | current |
| vasPusSnkEnableTr101 OBJECT-TYPE Enables or disables ETSI TR 101 290 statistics collection. | 1.3.6.1.4.1.2928.2.5.4.8.1.13 | TruthValue | read-create | current |
| vasPusSnkRemoteInetType OBJECT-TYPE Format of vasPusSnkRemoteInetAddress. | 1.3.6.1.4.1.2928.2.5.4.8.1.14 | InetAddressType | read-only | current |
| vasPusSnkRemoteInetAddress OBJECT-TYPE The IP address of the remote host from where the transport stream is received. The value is empty and the vasPusSnkRemoteInetType is `unknown' when a stream is not received. | 1.3.6.1.4.1.2928.2.5.4.8.1.15 | InetAddress | read-only | current |
| vasPusSnkStreamId OBJECT-TYPE Specifies the stream ID of the stream on the remote host that shall be received. The stream ID is a string that identifies the transport stream in all nodes where the stream exists. This must be unique within a node for any given transport stream. | 1.3.6.1.4.1.2928.2.5.4.8.1.16 | SnmpAdminString | read-create | current |
| vasPusSnkPassword OBJECT-TYPE The password to use for the received transport stream. The password must match the vasPusSrcPassword set on the source at the remote host. | 1.3.6.1.4.1.2928.2.5.4.8.1.17 | SnmpAdminString | read-create | current |
| vasStatisticsGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2928.2.5.5 | |||
| vasUdpStatisticsTable OBJECT-TYPE The conceptual table contains perforamance data and counters for UDP video streams. | 1.3.6.1.4.1.2928.2.5.5.1 | not-accessible | current | |
| vasUdpStatisticsEntry OBJECT-TYPE An entry in the conceptual table represents statistical data for one UDP object. | 1.3.6.1.4.1.2928.2.5.5.1.1 | not-accessible | current | |
| vasUdpStsIndex OBJECT-TYPE Index in the table. | 1.3.6.1.4.1.2928.2.5.5.1.1.1 | Unsigned32 | not-accessible | current |
| vasUdpStsOwner OBJECT-TYPE Reference to the object that allocated and uses this conceptual row. | 1.3.6.1.4.1.2928.2.5.5.1.1.2 | RowPointer | read-only | current |
| vasUdpStsBitrate OBJECT-TYPE Bitrate in bps. | 1.3.6.1.4.1.2928.2.5.5.1.1.3 | Unsigned32 | read-only | current |
| vasTrspStatisticsTable OBJECT-TYPE The conceptual table contains perforamance data and counters for transport streams. | 1.3.6.1.4.1.2928.2.5.5.2 | not-accessible | current | |
| vasTrspStatisticsEntry OBJECT-TYPE An entry in the conceptual table represents statistical data for one transport stream. | 1.3.6.1.4.1.2928.2.5.5.2.1 | not-accessible | current | |
| vasTrspIndex OBJECT-TYPE Index in table. | 1.3.6.1.4.1.2928.2.5.5.2.1.1 | Unsigned32 | not-accessible | current |
| vasTrspOwner OBJECT-TYPE Reference to the object that allocated and uses this conceptual row. | 1.3.6.1.4.1.2928.2.5.5.2.1.2 | RowPointer | read-only | current |
| vasTrspLastConnectionChange OBJECT-TYPE Last connection status change time. | 1.3.6.1.4.1.2928.2.5.5.2.1.3 | DateAndTime | read-only | current |
| vasTrspConnects OBJECT-TYPE Number of times that the connection state has changed to `connected'. | 1.3.6.1.4.1.2928.2.5.5.2.1.4 | Unsigned32 | read-only | current |
| vasTrspDisconnects OBJECT-TYPE Number of times that the connection state has changed to `disconnected'. | 1.3.6.1.4.1.2928.2.5.5.2.1.5 | Unsigned32 | read-only | current |
| vasTrspNetRecvBitrate OBJECT-TYPE Receive bitrate in kbps. | 1.3.6.1.4.1.2928.2.5.5.2.1.6 | Unsigned32 | read-only | current |
| vasTrspNetRecvBurstLoss OBJECT-TYPE Maximum number of packets that have been lost in a single burst error. | 1.3.6.1.4.1.2928.2.5.5.2.1.7 | Counter32 | read-only | current |
| vasTrspNetRecvOctets OBJECT-TYPE The number of received octets. | 1.3.6.1.4.1.2928.2.5.5.2.1.8 | Counter64 | read-only | current |
| vasTrspNetRecvLatency OBJECT-TYPE Latency used for error correction, in milliseconds (ms). | 1.3.6.1.4.1.2928.2.5.5.2.1.9 | Unsigned32 | read-only | current |
| vasTrspNetRecvDropped OBJECT-TYPE Number of packets dropped by the network. | 1.3.6.1.4.1.2928.2.5.5.2.1.10 | Counter64 | read-only | current |
| vasTrspNetRecvJitter OBJECT-TYPE Input jitter in milliseconds (ms). | 1.3.6.1.4.1.2928.2.5.5.2.1.11 | Unsigned32 | read-only | current |
| vasTrspNetRecvJitterRatio OBJECT-TYPE Jitter ratio, for rate controlled streams. | 1.3.6.1.4.1.2928.2.5.5.2.1.12 | Integer32 | read-only | current |
| vasTrspNetRecvOutOfOrder OBJECT-TYPE Number of packets received out of order. | 1.3.6.1.4.1.2928.2.5.5.2.1.13 | Counter64 | read-only | current |
| vasTrspNetRecvOverflows OBJECT-TYPE Number of input jitter buffer overflows. | 1.3.6.1.4.1.2928.2.5.5.2.1.14 | Counter64 | read-only | current |
| vasTrspNetRecvPackets OBJECT-TYPE Total number of received packets. | 1.3.6.1.4.1.2928.2.5.5.2.1.15 | Counter64 | read-only | current |
| vasTrspNetRecvPacketRate OBJECT-TYPE Received packets per second. | 1.3.6.1.4.1.2928.2.5.5.2.1.16 | Unsigned32 | read-only | current |
| vasTrspNetRecvPacketLoss OBJECT-TYPE Packet loss in millipercent (1/100,000) | 1.3.6.1.4.1.2928.2.5.5.2.1.17 | Unsigned32 (0..100000) | read-only | current |
| vasTrspArqRecvAlmostDropped OBJECT-TYPE Number of packets that required more than half latency to recover. | 1.3.6.1.4.1.2928.2.5.5.2.1.18 | Counter64 | read-only | current |
| vasTrspArqRecvBitrate OBJECT-TYPE Bitrate of received retransmissions in kbps. | 1.3.6.1.4.1.2928.2.5.5.2.1.19 | Unsigned32 | read-only | current |
| vasTrspArqRecvDropped OBJECT-TYPE Number of packets not recovered by either retransmissions or Forward Error Correction (FEC). | 1.3.6.1.4.1.2928.2.5.5.2.1.20 | Counter64 | read-only | current |
| vasTrspArqRecvDuplicates OBJECT-TYPE Number of duplicated retransmission packets. | 1.3.6.1.4.1.2928.2.5.5.2.1.21 | Counter64 | read-only | current |
| vasTrspArqRecvOverflows OBJECT-TYPE Number of packets dropped because of retransmission buffer overflow. | 1.3.6.1.4.1.2928.2.5.5.2.1.22 | Counter64 | read-only | current |
| vasTrspArqRecvPackets OBJECT-TYPE Number of packets received by retransmission. | 1.3.6.1.4.1.2928.2.5.5.2.1.23 | Counter64 | read-only | current |
| vasTrspArqRecvRecovered OBJECT-TYPE Number of packets recovered by retransmission. | 1.3.6.1.4.1.2928.2.5.5.2.1.24 | Counter64 | read-only | current |
| vasTrspArqRecvRequests OBJECT-TYPE Number of sent retransmission requests. | 1.3.6.1.4.1.2928.2.5.5.2.1.25 | Counter64 | read-only | current |
| vasTrspNetSendBitrate OBJECT-TYPE The send bitrate in kbps. | 1.3.6.1.4.1.2928.2.5.5.2.1.26 | Unsigned32 | read-only | current |
| vasTrspNetSendOctets OBJECT-TYPE The number of sent octets. | 1.3.6.1.4.1.2928.2.5.5.2.1.27 | Counter64 | read-only | current |
| vasTrspNetSendLimit OBJECT-TYPE The current sending limit in packets per second. | 1.3.6.1.4.1.2928.2.5.5.2.1.28 | Unsigned32 | read-only | current |
| vasTrspNetSendPackets OBJECT-TYPE Total number of sent packets. | 1.3.6.1.4.1.2928.2.5.5.2.1.29 | Counter64 | read-only | current |
| vasTrspNetSendRtt OBJECT-TYPE The return-trip time, RTT, in milliseconds (ms). | 1.3.6.1.4.1.2928.2.5.5.2.1.30 | Unsigned32 | read-only | current |
| vasTrspNetSendErrors OBJECT-TYPE The number of packets failed to be sent. | 1.3.6.1.4.1.2928.2.5.5.2.1.31 | Counter64 | read-only | current |
| vasTrspArqSendBitrate OBJECT-TYPE Bitrate of send retransmissions in kbps. | 1.3.6.1.4.1.2928.2.5.5.2.1.32 | Unsigned32 | read-only | current |
| vasTrspArqSendIgnored OBJECT-TYPE Number of ignored too frequent retransmission requests. | 1.3.6.1.4.1.2928.2.5.5.2.1.33 | Counter64 | read-only | current |
| vasTrspArqSendMissed OBJECT-TYPE Number of ignored too late retransmission requests. | 1.3.6.1.4.1.2928.2.5.5.2.1.34 | Counter64 | read-only | current |
| vasTrspArqSendPacketRate OBJECT-TYPE Retransmitted send packets per second. | 1.3.6.1.4.1.2928.2.5.5.2.1.35 | Unsigned32 | read-only | current |
| vasTrspArqSendPackets OBJECT-TYPE Number of packets sent by retransmission. | 1.3.6.1.4.1.2928.2.5.5.2.1.36 | Counter64 | read-only | current |
| vasTrspFecRecvBitrate OBJECT-TYPE The Forward Error Correction (FEC) receive overhead bitrate in kbps. | 1.3.6.1.4.1.2928.2.5.5.2.1.37 | Unsigned32 | read-only | current |
| vasTrspFecRecvPacketRate OBJECT-TYPE The Forward Error Correction (FEC) receive packet rate in packets per second. | 1.3.6.1.4.1.2928.2.5.5.2.1.38 | Unsigned32 | read-only | current |
| vasTrspFecRecvPackets OBJECT-TYPE The number of received Forward Error Correction (FEC) packets | 1.3.6.1.4.1.2928.2.5.5.2.1.39 | Counter64 | read-only | current |
| vasTrspFecRecvRecovered OBJECT-TYPE The number of packets recovered by Forward Error Correction (FEC). | 1.3.6.1.4.1.2928.2.5.5.2.1.40 | Counter64 | read-only | current |
| vasTrspFecSendBitrate OBJECT-TYPE The Forward Error Correction (FEC) send bitrate in kbps. | 1.3.6.1.4.1.2928.2.5.5.2.1.41 | Unsigned32 | read-only | current |
| vasTrspFecSendPacketRate OBJECT-TYPE The Forward Error Correction (FEC) receive packet rate in packets per second. | 1.3.6.1.4.1.2928.2.5.5.2.1.42 | Unsigned32 | read-only | current |
| vasTrspFecSendPackets OBJECT-TYPE The number of sent Forward Error Correction (FEC) packets. | 1.3.6.1.4.1.2928.2.5.5.2.1.43 | Counter64 | read-only | current |