NETI-TRUNK-MIB
- Registered at
- 1.3.6.1.4.1.2928.2.3
- Last updated
- 2014-03-14 08:00
- Organization
- Net Insight AB
- Revisions
- 2014-03-14 08:00, 2013-08-29 16:00, 2013-01-24 15:00, 2009-08-26 15:00
- Namespace
- netinsight
- Source file
NETI-TRUNK-MIB- Digest
sha256:b426166b29c28b5a071723a6006c5ea53231add6c96601d56b3c337bfcae6b4d
Description
MIB for DTM network links (trunks). DTM trunks provide transport of DTM data between two DTM networks nodes. The MIB currently includes the DPP-IP group (neti-dppip), providing management of DPP-IP encapsulated DTM over IP/Ethernet. It includes configuration information and status.
Contact
Net Insight AB Box 42093 SE-126 14 Stockholm Sweden Tel +46-8-685 0400 info@netinsight.se
Imports
| From | Symbols |
|---|---|
| NETI-COMMON-MIB | netiGeneric |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowPointer, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
NETI-COMMON-MIB NETI-TRUNK-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| DppipSupport TEXTUAL-CONVENTION Represents the support of a specific DPP-IP function: octet contents 1 major version 2 minor version Any minor version N.x includes support for any minor version M.y with major version M<N. Minor version N.n includes support for any minor version N.m with the same major version N and m<n. | current | |||
| FecMode TEXTUAL-CONVENTION The mode of operation of the Forward Error Correction function (FEC). The FEC function may be not used (fecNone), used for column correction (fec1D) or used for both row and column correction (fec2D). | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| trunkObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2928.2.3.1 | |||
| dppipGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2928.2.3.1.1 | |||
| dppipNumber OBJECT-TYPE The number of DPP-IP interfaces (regardless of their current state) present on this system. | 1.3.6.1.4.1.2928.2.3.1.1.1 | Integer32 | read-only | current |
| dppipLastChange OBJECT-TYPE The value of sysUpTime when status or configuration of any the objects in the dppipTable was last changed. | 1.3.6.1.4.1.2928.2.3.1.1.2 | TimeStamp | read-only | current |
| dppipTable OBJECT-TYPE A list of DPP-IP interface entries. The number of entries is given by the value of dppipNumber. The following objects need to be written simultaneously, i.e. as a single write operation, while dppipAdminStatus is `up': dppipTxSlots, dppipMtu, dppipTxFecMode, dppipTxFecRows, dppipTxFecCols | 1.3.6.1.4.1.2928.2.3.1.1.3 | not-accessible | current | |
| dppipEntry OBJECT-TYPE A DPP-IP interface entry containing objects at the subnetwork layer and below for a particular interface. | 1.3.6.1.4.1.2928.2.3.1.1.3.1 | not-accessible | current | |
| dppipIndex OBJECT-TYPE A value greater than zero that is unique for each DPP-IP interface. The value for each DPP-IP interface must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.1 | Unsigned32 | not-accessible | current |
| dppipName OBJECT-TYPE The textual name of the interface. The value of this object should be the name of the DPP-IP interface as assigned by the local device. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.2 | SnmpAdminString | read-only | current |
| dppipAddress OBJECT-TYPE The IPv4 address of the DPP-IP interface. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.3 | IpAddress | read-write | current |
| dppipNetMask OBJECT-TYPE The subnet mask associated with the IP address of DPP-IP interface. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.4 | IpAddress | read-write | current |
| dppipDefaultGateway OBJECT-TYPE The IPv4 address of the default gateway. Packets addressed to a destination outside the subnet of the DPP-IP interface are by default routed to this gateway. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.5 | IpAddress | read-write | current |
| dppipPeerAddress OBJECT-TYPE The IPv4 address of the peer DPP-IP interface at the remote end of the DTM trunk. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.6 | IpAddress | read-write | current |
| dppipTxSlots OBJECT-TYPE The DPP-IP interface's current transmit side capacity in slots per DTM frame. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.7 | Unsigned32 | read-write | current |
| dppipTxUsedCapacity OBJECT-TYPE An estimate of the transmit side physical layer capacity used by the DPP-IP interface in bits per second. It represents a minimum required capacity along the network path. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.8 | Gauge32 | read-only | current |
| dppipRxSlots OBJECT-TYPE The DPP-IP interface's current receive side capacity in slots per DTM frame. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.9 | Gauge32 | read-only | current |
| dppipRxUsedCapacity OBJECT-TYPE An estimate of the receive side physical layer capacity used by the DPP-IP interface in bits per second. It represents a minimum required capacity along the network path. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.10 | Gauge32 | read-only | current |
| dppipDelayVariation OBJECT-TYPE The RMS (i.e. standard deviation) value of the DPP-IP path delay variation in ns. This value represents a momentary snapshot of the delay variation. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.11 | Unsigned32 | read-only | current |
| dppipOperStatus OBJECT-TYPE The current operational state of the interface. The testing(3) state indicates that no operational frames can be passed. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.12 | INTEGER {up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), lowerLayerDown(7)} | read-only | current |
| dppipFailure OBJECT-TYPE A textual string describing a fault status on the DPP-IP interface. The object presents an empty string if there are no faults on the interface. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.13 | SnmpAdminString | read-only | current |
| dppipReceivedFrames OBJECT-TYPE The total number of DPP-IP frames that have been received. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.14 | Counter64 | read-only | current |
| dppipMissingFrames OBJECT-TYPE The number of DPP-IP frames that were missing in the frame sequence, i.e. the expected sequence numbers were not found in the DPP-IP framing buffer. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.15 | Counter64 | read-only | current |
| dppipDeliveredFrames OBJECT-TYPE The total number of DPP-IP data frames that have been delivered to the DTM interface. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.16 | Counter64 | read-only | current |
| dppipDroppedFrames OBJECT-TYPE The number of DPP-IP frames that have been received and have not been processed since the interface was unable to align them to the DPP-IP frame sequence. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.17 | Counter64 | read-only | current |
| dppipDuplicateFrames OBJECT-TYPE The number of DPP-IP frames that were received with a sequence number of an already processed DPP-IP frame. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.18 | Counter64 | read-only | current |
| dppipReorderedFrames OBJECT-TYPE The number of DPP-IP frames that were received out of order, but could still be aligned to the DPP-IP frame sequence. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.19 | Counter64 | read-only | current |
| dppipLostFrames OBJECT-TYPE The number of missing DPP-IP data frames that could not be delivered to the DTM interface. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.20 | Counter64 | read-only | current |
| dppipRecoveredFrames OBJECT-TYPE The number of missing DPP-IP data frames that were recovered by the FEC procedure. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.21 | Counter64 | read-only | current |
| dppipSentFrames OBJECT-TYPE The total number of DPP-IP frames that have been sent. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.22 | Counter64 | read-only | current |
| dppipDelayVarPtp OBJECT-TYPE The point-to-point value of the DPP-IP path delay variation in nanoseconds. The special value 0 means that the measurement is incomplete | 1.3.6.1.4.1.2928.2.3.1.1.3.1.23 | Unsigned32 | read-only | current |
| dppipDelayVar999 OBJECT-TYPE The 99.9 percentile value of the DPP-IP path delay variation given in nanoseconds. The special value 0 means that the measurement is incomplete. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.24 | Unsigned32 | read-only | current |
| dppipAdminStatus OBJECT-TYPE The desired state of the interface. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.25 | INTEGER {up(1), down(2)} | read-write | current |
| dppipVlan OBJECT-TYPE The VLAN identity associated to the DPP-IP interface. The value 0 indicates that the DPP-IP interface does not belong to a VLAN. The value -1 indicates that Ethernet frames from the DPP-IP interface are not tagged. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.26 | Integer32 (-1..4095) | read-write | current |
| dppipDelayVar01 OBJECT-TYPE The 0.1 percentile value of the DPP-IP path delay variation given in nanoseconds. The special value 0 means that the measurement is incomplete. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.27 | Unsigned32 | read-only | current |
| dppipPrio OBJECT-TYPE The Ethernet priority for frames sent from the DPP-IP interface. Ignored if frames are untagged (i.e. dppipVlan is -1). | 1.3.6.1.4.1.2928.2.3.1.1.3.1.28 | Unsigned32 (0..7) | read-write | current |
| dppipPhysIf OBJECT-TYPE A reference to an object representing the physical interface that supports the DPP-IP interface. The special value .0.0 is used, when no such reference is available. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.29 | RowPointer | read-only | current |
| dppipMtu OBJECT-TYPE The Maximum Transmission Unit of the DPP-IP interface, i.e. the maximum size of the DPP-IP payload, including IP header, UDP header and DPP-IP header. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.30 | Unsigned32 (64..1500) | read-write | current |
| dppipTtl OBJECT-TYPE The Time To Live of frames sent at the DPP-IP interface. This value is set in the IP header. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.31 | Unsigned32 (0..127) | read-write | current |
| dppipDscp OBJECT-TYPE The Differential Services Coding Point of frames sent at the DPP-IP interface. This value is set in the IP header. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.32 | Unsigned32 (0..63) | read-write | current |
| dppipRxSlotsPerFrame OBJECT-TYPE Number of DTM slots per received DPP-IP data frame. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.33 | Unsigned32 | read-only | current |
| dppipAvailTxSlots OBJECT-TYPE The maximum transmit slot rate (slots/frame) that can be allocated at the DTM switch. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.34 | Gauge32 | read-only | current |
| dppipAvailRxSlots OBJECT-TYPE The maximum receive slot rate (slots/frame) that can be allocated at the DTM switch. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.35 | Gauge32 | read-only | current |
| dppipMinUsageRatio OBJECT-TYPE The minimum allowed usage ratio (used slots/configured slots) in per-mille, when dynamic trunk functionality is used. 1000 is default and indicates that the Dynamic Trunk function is disabled. Requires Dynamic Trunk function support equal to 1.1 or higher. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.36 | Unsigned32 | read-write | current |
| dppipTxTranspSlots OBJECT-TYPE The DPP-IP interface's current transmit side capacity in slots per DTM frame that is actually transported over the. When Dynamic Trunk functionality is disabled this is equal to dppipTxSlots. When Dynamic Trunk functionality is enabled this is less or equal to dppipTxSlots, since slots that are not used by any channel need not be transported. Requires Dynamic Trunk function support equal to 1.1 or higher. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.37 | Gauge32 | read-only | current |
| dppipRxTranspSlots OBJECT-TYPE The DPP-IP interface's current receive side capacity in slots per DTM frame that is actually transported. When Dynamic Trunk functionality is disabled this is equal to dppipRxSlots. When Dynamic Trunk functionality is enabled this is less or equal to dppipRxSlots, since slots that are not used by any channel need not be transported. Requires Dynamic Trunk function support equal to 1.1 or higher. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.38 | Gauge32 | read-only | current |
| dppipNomDTDelay OBJECT-TYPE The nominal extra delay in ns when the Dynamic Trunk function is enabled. Requires Dynamic Trunk function support equal to 1.1 or higher. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.39 | Unsigned32 | read-only | current |
| dppipTxFecMode OBJECT-TYPE The DPP-IP interface's current mode of operation of the transmit side Forward Error Correction function (FEC). The FEC function may be not used (fecNone), used for column correction (fec1D) or used for both row and column correction (fec2D). | 1.3.6.1.4.1.2928.2.3.1.1.3.1.40 | FecMode | read-write | current |
| dppipTxFecRows OBJECT-TYPE The DPP-IP interface's current number of data rows in the transmit side Forward Error Correction (FEC) matrix. This object is not applicable when dppipTxFecMode is fecNone. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.41 | Unsigned32 | read-write | current |
| dppipTxFecCols OBJECT-TYPE The DPP-IP interface's current number of data columns in the transmit side Forward Error Correction (FEC) matrix. This object is not applicable when dppipTxFecMode is fecNone. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.42 | Unsigned32 | read-write | current |
| dppipRxFecMode OBJECT-TYPE The DPP-IP interface's current mode of operation of the receive side Forward Error Correction function (FEC). The FEC function may be not used (fecNone), used for column correction (fec1D) or used for both row and column correction (fec2D). | 1.3.6.1.4.1.2928.2.3.1.1.3.1.43 | FecMode | read-only | current |
| dppipRxFecRows OBJECT-TYPE The DPP-IP interface's current number of data rows in the receive side Forward Error Correction (FEC) matrix. This object is not applicable when dppipRxFecMode is fecNone. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.44 | Unsigned32 | read-only | current |
| dppipRxFecCols OBJECT-TYPE The DPP-IP interface's current number of data columns in the receive side Forward Error Correction (FEC) matrix. This object is not applicable when dppipRxFecMode is fecNone. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.45 | Unsigned32 | read-only | current |
| dppipCntControl OBJECT-TYPE Controls the statistics counter monitoring. The statistics monitoring is restarted and all counters set to 0, by writing `reset' to this object. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.46 | INTEGER {reset(1)} | read-write | current |
| dppipSuppressAlarms OBJECT-TYPE Suppression control for alarms from the DPP-IP interface. When set to `true', all alarms are suppressed. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.47 | TruthValue | read-write | current |
| dppipSigFailFilter OBJECT-TYPE Signal fail filter hold-off time in milliseconds. Trail Signal Fail conditions must be persistent during the hold-off time, before operStatus is changed from `up' to `down'. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.48 | Unsigned32 (0..2000) | read-write | current |
| dppipDegThreshold OBJECT-TYPE The detection threshold for DEG alarm. A bad second is declared when the number of errored blocks is equal to or greater than the threshold, otherwise a good second is declared. Default is 1200 | 1.3.6.1.4.1.2928.2.3.1.1.3.1.49 | Unsigned32 (1..8000) | read-write | current |
| dppipDegPeriod OBJECT-TYPE The persistence time for detection of DEG alarm as the number of consecutive seconds with changed status (bad or good) before the alarm is set or cleared. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.50 | Unsigned32 (2..10) | read-write | current |
| dppipTolJitter OBJECT-TYPE The tolerated jitter and wander of the DPP-IP interface given in microseconds. | 1.3.6.1.4.1.2928.2.3.1.1.3.1.51 | Unsigned32 | read-write | current |
| dppipLimitsTable OBJECT-TYPE A list of DPP-IP interface limits entries. The number of entries is given by the value of dppipNumber. | 1.3.6.1.4.1.2928.2.3.1.1.4 | not-accessible | current | |
| dppipLimitsEntry OBJECT-TYPE A DPP-IP interface limits entry containing limits for a particular interface. | 1.3.6.1.4.1.2928.2.3.1.1.4.1 | not-accessible | current | |
| dppipMaxFecMode OBJECT-TYPE The DPP-IP interface's maximum mode of operation of the Forward Error Correction function (FEC). The FEC function may be not used (fecNone), used for column correction (fec1D) or used for both row and column correction (fec2D). | 1.3.6.1.4.1.2928.2.3.1.1.4.1.1 | FecMode | read-only | current |
| dppipMaxFecRows OBJECT-TYPE The DPP-IP interface's maximum number of data rows in the transmit side Forward Error Correction (FEC) matrix. | 1.3.6.1.4.1.2928.2.3.1.1.4.1.2 | Unsigned32 | read-only | current |
| dppipMinFecRows OBJECT-TYPE The DPP-IP interface's minimum number of data rows in the transmit side Forward Error Correction (FEC) matrix. | 1.3.6.1.4.1.2928.2.3.1.1.4.1.3 | Unsigned32 | read-only | current |
| dppipMaxFecCols OBJECT-TYPE The DPP-IP interface's maximum number of data columns in the transmit side Forward Error Correction (FEC) matrix. | 1.3.6.1.4.1.2928.2.3.1.1.4.1.4 | Unsigned32 | read-only | current |
| dppipMinFecCols OBJECT-TYPE The DPP-IP interface's minimum number of data columns in the transmit side Forward Error Correction (FEC) matrix. | 1.3.6.1.4.1.2928.2.3.1.1.4.1.5 | Unsigned32 | read-only | current |
| dppipMaxFecElems OBJECT-TYPE The DPP-IP interface's maximum number of data elements in the transmit side Forward Error Correction (FEC) matrix. | 1.3.6.1.4.1.2928.2.3.1.1.4.1.6 | Unsigned32 | read-only | current |
| dppipMaxTxSlots OBJECT-TYPE The maximum number of slots per DTM frame that can be allocated at the DPP-IP transmit interface. | 1.3.6.1.4.1.2928.2.3.1.1.4.1.7 | Unsigned32 | read-only | current |
| dppipMinTxSlots OBJECT-TYPE The minimum number of slots per DTM frame that can be allocated at the DPP-IP transmit interface. | 1.3.6.1.4.1.2928.2.3.1.1.4.1.8 | Unsigned32 | read-only | current |
| dppipMaxTolJitter OBJECT-TYPE The maximum tolerated jitter that can be configured expressed in units of DPP-IP inter-frame intervals. The DPP-IP inter-frame interval in microseconds is: dppipRxSlotsPerFrame * 125 / dppipRxSlots. | 1.3.6.1.4.1.2928.2.3.1.1.4.1.9 | Unsigned32 | read-only | current |
| dppipMinTolJitter OBJECT-TYPE The minimum tolerated jitter that can be configured expressed in units of DPP-IP inter-frame intervals. The DPP-IP inter-frame interval in microseconds is: dppipRxSlotsPerFrame * 125 / dppipRxSlots. | 1.3.6.1.4.1.2928.2.3.1.1.4.1.10 | Unsigned32 | read-only | current |
| dppipDTSupport OBJECT-TYPE The local interface's maximum level of support for the Dynamic Trunk function. | 1.3.6.1.4.1.2928.2.3.1.1.4.1.11 | DppipSupport | read-only | current |
| dppipTTSupport OBJECT-TYPE The local interface's maximum level of support for the Time Transfer function. | 1.3.6.1.4.1.2928.2.3.1.1.4.1.12 | DppipSupport | read-only | current |
| dppipPeerLimitsTable OBJECT-TYPE A list of DPP-IP interface limits entries. The number of entries is given by the value of dppipNumber. | 1.3.6.1.4.1.2928.2.3.1.1.5 | not-accessible | current | |
| dppipPeerLimitsEntry OBJECT-TYPE A DPP-IP interface peer limits entry containing limits for the peer of a particular interface. | 1.3.6.1.4.1.2928.2.3.1.1.5.1 | not-accessible | current | |
| dppipPeerMaxFecMode OBJECT-TYPE The peer interface's maximum mode of operation of the Forward Error Correction function (FEC). The FEC function may be not used (fecNone), used for column correction (fec1D) or used for both row and column correction (fec2D). | 1.3.6.1.4.1.2928.2.3.1.1.5.1.1 | FecMode | read-only | current |
| dppipPeerMaxFecRows OBJECT-TYPE The peer interface's maximum number of data rows in the receive side Forward Error Correction (FEC) matrix. | 1.3.6.1.4.1.2928.2.3.1.1.5.1.2 | Unsigned32 | read-only | current |
| dppipPeerMinFecRows OBJECT-TYPE The peer interface's minimum number of data rows in the receive side Forward Error Correction (FEC) matrix. | 1.3.6.1.4.1.2928.2.3.1.1.5.1.3 | Unsigned32 | read-only | current |
| dppipPeerMaxFecCols OBJECT-TYPE The peer interface's maximum number of data columns in the receive side Forward Error Correction (FEC) matrix. | 1.3.6.1.4.1.2928.2.3.1.1.5.1.4 | Unsigned32 | read-only | current |
| dppipPeerMinFecCols OBJECT-TYPE The peer interface's minimum number of data columns in the receive side Forward Error Correction (FEC) matrix. | 1.3.6.1.4.1.2928.2.3.1.1.5.1.5 | Unsigned32 | read-only | current |
| dppipPeerMaxFecElems OBJECT-TYPE The peer interface's maximum number of data elements in the receive side Forward Error Correction (FEC) matrix. | 1.3.6.1.4.1.2928.2.3.1.1.5.1.6 | Unsigned32 | read-only | current |
| dppipPeerMaxRxSlots OBJECT-TYPE The maximum number of slots per DTM frame that can be allocated at the receive interface in the peer. | 1.3.6.1.4.1.2928.2.3.1.1.5.1.7 | Unsigned32 | read-only | current |
| dppipPeerMinRxSlots OBJECT-TYPE The minimum number of slots per DTM frame that can be allocated at the DPP-IP receive interface of the peer. | 1.3.6.1.4.1.2928.2.3.1.1.5.1.8 | Unsigned32 | read-only | current |
| dppipPeerDTSupport OBJECT-TYPE The peer interface's maximum level of support for the Dynamic Trunk function. | 1.3.6.1.4.1.2928.2.3.1.1.5.1.9 | DppipSupport | read-only | current |
| dppipPeerTTSupport OBJECT-TYPE The peer interface's maximum level of support for the Time Transfer function. | 1.3.6.1.4.1.2928.2.3.1.1.5.1.10 | DppipSupport | read-only | current |