MWR-RADIO-MC-MIB
- Registered at
- 1.3.6.1.4.1.7262.4.5.12.2011.3.6.1.4.1.7262.4.5.12.2021.3.6.1.4.1.7262.4.5.12.2031.3.6.1.4.1.7262.4.5.12.2041.3.6.1.4.1.7262.4.5.1003
- Last updated
- 2014-06-10 10:23
- Organization
- Dragonwave Inc.
- Revisions
- 2014-06-23 11:09, 2014-09-23 17:22
- Namespace
- dragonwave
- Source file
MWR-RADIO-MC-MIB- Digest
sha256:8e1349fb9ca0800272c9cd916d52c298f614f9701be1570c6ccd314f1fa6458f
Description
This specifies the contact information and the revision tracking information for the MIB module version.
Contact
http://www.dragonwaveinc.com 600-411 Legget Drive Ottawa, Ontario Canada, K2K 3C9 Tel : 613-599-9991 Fax: 613-599-4265 Support: 613-271-7010
Imports
| From | Symbols |
|---|---|
| DWI-HARMONY-PRIVATE-MIB | mwr |
| EQUIPMENT-COMMON-MIB | EnableType, equipmentAlarmActiveConditionId, equipmentOutTrapsCounter, equipmentTrapInfo |
| MWR-ETHERNET-MIB | RadioInstanceType, mwrEventConfigSeverity |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Counter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
DWI-HARMONY-PRIVATE-MIB EQUIPMENT-COMMON-MIB INET-ADDRESS-MIB MWR-ETHERNET-MIB MWR-RADIO-MC-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| mwrRadio OBJECT-IDENTITY | 1.3.6.1.4.1.7262.4.5.12 | |||
| mwrEmcRadioConfigurations OBJECT-IDENTITY | 1.3.6.1.4.1.7262.4.5.12.201 | |||
| mwrEmcRadioConfigurationsTable OBJECT-TYPE Table containing radio configurations. | 1.3.6.1.4.1.7262.4.5.12.201.1 | not-accessible | current | |
| mwrEmcRadioConfigurationsEntry OBJECT-TYPE Table entry containing radio channel configurations. | 1.3.6.1.4.1.7262.4.5.12.201.1.1 | not-accessible | current | |
| mwrEmcRadioConfigIndex OBJECT-TYPE A unique value for each radio channel if applicable. | 1.3.6.1.4.1.7262.4.5.12.201.1.1.1 | RadioInstanceType | not-accessible | current |
| mwrEmcRadioTxState OBJECT-TYPE Represents the transmit state of the radio channel. | 1.3.6.1.4.1.7262.4.5.12.201.1.1.2 | EnableType | read-write | current |
| mwrEmcRadioTxPower OBJECT-TYPE This defines the programmed transmit level of the radio channel. The power you see is divided by 10. e.g. A display of 133 is actually 13.3 dB. Notes: - Programmed and Actual transmit power may differ - see mwrEmcRadioActualTxPower. | 1.3.6.1.4.1.7262.4.5.12.201.1.1.3 | Integer32 | read-write | current |
| mwrEmcRadioTxDownTime OBJECT-TYPE The amount of time in seconds the radio transmitter is disabled when the mwrEmcRadioTxState is turned off. - Make sure this is set before the mwrEmcRadioTxState is disabled. - If the down time is set to 0, the radio will stay disabled until it is re-enabled again. | 1.3.6.1.4.1.7262.4.5.12.201.1.1.4 | Integer32 | read-write | current |
| mwrEmcRadioRxFrequency OBJECT-TYPE Represents the receive Radio frequency in kHz. | 1.3.6.1.4.1.7262.4.5.12.201.1.1.5 | Integer32 | read-write | current |
| mwrEmcRadioTxFrequency OBJECT-TYPE Represents the transmit Radio frequency in kHz. | 1.3.6.1.4.1.7262.4.5.12.201.1.1.6 | Integer32 | read-write | current |
| mwrEmcRadioProfileTable OBJECT-TYPE Table containing the radio profile configurations. | 1.3.6.1.4.1.7262.4.5.12.201.2 | not-accessible | current | |
| mwrEmcRadioProfileEntry OBJECT-TYPE Table entry containing the radio profile configurations. | 1.3.6.1.4.1.7262.4.5.12.201.2.1 | not-accessible | current | |
| mwrEmcRadioStandardMode OBJECT-TYPE An index representing the available standard mode of the radio channel. | 1.3.6.1.4.1.7262.4.5.12.201.2.1.1 | DisplayString | not-accessible | current |
| mwrEmcRadioChannelBw OBJECT-TYPE An index representing the available channel bandwidth of the radio channel. | 1.3.6.1.4.1.7262.4.5.12.201.2.1.2 | DisplayString | not-accessible | current |
| mwrEmcRadioStaticTxProfile OBJECT-TYPE An index representing the available static tx profile of the radio channel. | 1.3.6.1.4.1.7262.4.5.12.201.2.1.3 | DisplayString | not-accessible | current |
| mwrEmcRadioProgrammedProfile OBJECT-TYPE Represents the configured standard mode, channel BW and the TX profile of the radio channel. | 1.3.6.1.4.1.7262.4.5.12.201.2.1.4 | EnableType | read-write | current |
| mwrEmcRadioThresholdAlarmTable OBJECT-TYPE Table containing the threshold alarm configurations of the radio channel. | 1.3.6.1.4.1.7262.4.5.12.201.3 | not-accessible | current | |
| mwrEmcRadioThresholdAlarmEntry OBJECT-TYPE Table entry containing the threshold alarm configurations of the radio channel. | 1.3.6.1.4.1.7262.4.5.12.201.3.1 | not-accessible | current | |
| mwrEmcRadioThresholdIndex OBJECT-TYPE A unique value for each radio channel if applicable. | 1.3.6.1.4.1.7262.4.5.12.201.3.1.1 | RadioInstanceType | not-accessible | current |
| mwrEmcRadioRslBelowThresholdParams OBJECT-TYPE Represents the RSL threshold in dB and the number of seconds the RSL should be below the threshold. An example of the format of the string is as follows: '-75 10'. The first parameter power level in dB, the second is the time in seconds. In this example the threshold -75 dB and the time is set to 10 seconds. The single quote marks are not used in the command. | 1.3.6.1.4.1.7262.4.5.12.201.3.1.2 | DisplayString | read-write | current |
| mwrEmcRadioTxAboveThresholdParams OBJECT-TYPE Represents the radio transmit power threshold in dB and the number of seconds threshold must be exceeded. An example of the format of the string is as follows: '-75 10'. The first parameter power level in dB, the second is the time in seconds. In this example the threshold -75 dB and the time is set to 10 seconds. The single quote marks are not used in the command. | 1.3.6.1.4.1.7262.4.5.12.201.3.1.3 | DisplayString | read-write | current |
| mwrEmcRadioChCfgSynchEnable OBJECT-TYPE This object enables or disables synchronization of the radio configuration on multiple carriers. | 1.3.6.1.4.1.7262.4.5.12.201.4 | EnableType | read-write | current |
| mwrEmcRadioStatus OBJECT-IDENTITY | 1.3.6.1.4.1.7262.4.5.12.202 | |||
| mwrEmcRadioStatusTable OBJECT-TYPE Table containing the status of the radio channel. | 1.3.6.1.4.1.7262.4.5.12.202.1 | not-accessible | current | |
| mwrEmcRadioStatusEntry OBJECT-TYPE Table entry containing the status of the radio channel. | 1.3.6.1.4.1.7262.4.5.12.202.1.1 | not-accessible | current | |
| mwrEmcRadioStatusIndex OBJECT-TYPE A unique value for each radio channel if applicable. | 1.3.6.1.4.1.7262.4.5.12.202.1.1.1 | RadioInstanceType | read-only | current |
| mwrEmcRadioOperStatus OBJECT-TYPE The current operational state of the Radio. When radio is fully configured and ready to operate the status will be up. | 1.3.6.1.4.1.7262.4.5.12.202.1.1.2 | INTEGER {up(1), down(2)} | read-only | current |
| mwrEmcRadioTRSpacing OBJECT-TYPE Represents the difference between the configured TX/RX center frequency of the radio channel. | 1.3.6.1.4.1.7262.4.5.12.202.1.1.3 | Integer32 | read-only | current |
| mwrEmcRadioActualTxStatus OBJECT-TYPE This object defines the actual transmit state of the radio channel. | 1.3.6.1.4.1.7262.4.5.12.202.1.1.4 | EnableType | read-only | current |
| mwrEmcRadioRxFreqMin OBJECT-TYPE Represents the minimum radio RX frequency allowed. | 1.3.6.1.4.1.7262.4.5.12.202.1.1.5 | Integer32 | read-only | current |
| mwrEmcRadioRxFreqMax OBJECT-TYPE Represents the maximum radio RX frequency allowed. | 1.3.6.1.4.1.7262.4.5.12.202.1.1.6 | Integer32 | read-only | current |
| mwrEmcRadioTxFreqMin OBJECT-TYPE Represents the minimum radio TX frequency allowed. | 1.3.6.1.4.1.7262.4.5.12.202.1.1.7 | Integer32 | read-only | current |
| mwrEmcRadioTxFreqMax OBJECT-TYPE Represents the maximum radio TX frequency allowed. | 1.3.6.1.4.1.7262.4.5.12.202.1.1.8 | Integer32 | read-only | current |
| mwrEmcRadioTxPowerMin OBJECT-TYPE Represents the minimum radio Transmit Power allowed. | 1.3.6.1.4.1.7262.4.5.12.202.1.1.9 | Integer32 | read-only | current |
| mwrEmcRadioTxPowerMax OBJECT-TYPE Represents the maximum radio Transmit Power allowed. | 1.3.6.1.4.1.7262.4.5.12.202.1.1.10 | Integer32 | read-only | current |
| mwrEmcRadioLinkStatus OBJECT-TYPE The current operational status of the radio link. | 1.3.6.1.4.1.7262.4.5.12.202.1.1.11 | INTEGER {up(1), down(2)} | read-only | current |
| mwrEmcRadioPerformance OBJECT-IDENTITY | 1.3.6.1.4.1.7262.4.5.12.203 | |||
| mwrEmcRadioPerfStatsTable OBJECT-TYPE Table containing the performance of the radio channel. | 1.3.6.1.4.1.7262.4.5.12.203.1 | not-accessible | current | |
| mwrEmcRadioPerfStatsEntry OBJECT-TYPE Table entry containing the performance of the radio channel. | 1.3.6.1.4.1.7262.4.5.12.203.1.1 | not-accessible | current | |
| mwrEmcRadioStatsIndex OBJECT-TYPE A unique value for each radio channel if applicable. | 1.3.6.1.4.1.7262.4.5.12.203.1.1.1 | RadioInstanceType | not-accessible | current |
| mwrEmcRadioTxFrames OBJECT-TYPE The current count of radio frames transmitted. | 1.3.6.1.4.1.7262.4.5.12.203.1.1.2 | Counter64 | read-only | current |
| mwrEmcRadioRxGoodFrames OBJECT-TYPE The current count of good radio frames received. | 1.3.6.1.4.1.7262.4.5.12.203.1.1.3 | Counter64 | read-only | current |
| mwrEmcRadioRxErrsFrames OBJECT-TYPE The current count of radio frames received in error. | 1.3.6.1.4.1.7262.4.5.12.203.1.1.4 | Counter64 | read-only | current |
| mwrEmcRadioRSL OBJECT-TYPE An estimate of the radio RSL. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dB. For example -352 is actually -35.2dB | 1.3.6.1.4.1.7262.4.5.12.203.1.1.5 | Integer32 | read-only | current |
| mwrEmcRadioEqualizerStress OBJECT-TYPE Indicates the average magnitude of all the equalizer taps to provide a measure of how hard the equalizer is working. | 1.3.6.1.4.1.7262.4.5.12.203.1.1.6 | Integer32 | read-only | current |
| mwrEmcRadioSNR OBJECT-TYPE The absolute value of the estimate of the radio SNR. Divide the value by 10 to get the actual SNR. | 1.3.6.1.4.1.7262.4.5.12.203.1.1.7 | Integer32 | read-only | current |
| mwrEmcRadioLinkAvailability OBJECT-TYPE The amount of time the radio link is up. | 1.3.6.1.4.1.7262.4.5.12.203.1.1.8 | Counter32 | read-only | current |
| mwrEmcRadioActualTxPower OBJECT-TYPE This object indicates the running configuration for tx power. | 1.3.6.1.4.1.7262.4.5.12.203.1.1.9 | Integer32 | read-only | current |
| mwrEmcRadioActualTxProfile OBJECT-TYPE A read-only string specifying the actual value for the TX profile. | 1.3.6.1.4.1.7262.4.5.12.203.1.1.10 | DisplayString | read-only | current |
| mwrEmcRadioPerfStats32BitTable OBJECT-TYPE Table containing 32-bit counters of the radio channel. This table is provided to satisfy snmp v1 users where they can't access 64-bit counters. | 1.3.6.1.4.1.7262.4.5.12.203.2 | not-accessible | current | |
| mwrEmcRadioPerfStats32BitEntry OBJECT-TYPE Table entry containing 32-bit counters of the radio channel. | 1.3.6.1.4.1.7262.4.5.12.203.2.1 | not-accessible | current | |
| mwrEmcRadioStats32BitIndex OBJECT-TYPE A unique value for each radio channel if applicable. | 1.3.6.1.4.1.7262.4.5.12.203.2.1.1 | RadioInstanceType | not-accessible | current |
| mwrEmcRadioTxFrames32Bit OBJECT-TYPE A low capacity 32-bit counter representing the current count of radio frames transmitted. | 1.3.6.1.4.1.7262.4.5.12.203.2.1.2 | Counter32 | read-only | current |
| mwrEmcRadioRxGoodFrames32Bit OBJECT-TYPE A low capacity 32-bit counter representing the current count of radio frames received. | 1.3.6.1.4.1.7262.4.5.12.203.2.1.3 | Counter32 | read-only | current |
| mwrEmcRadioRxErrsFrames32Bit OBJECT-TYPE A low capacity 32-bit counter representing the current count of radio frames received in error. | 1.3.6.1.4.1.7262.4.5.12.203.2.1.4 | Counter32 | read-only | current |
| mwrEmcRadioNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.7262.4.5.12.204 |
Notifications
| Name | OID | Status |
|---|---|---|
| mwrEmcRadioRxLossOfSync NOTIFICATION-TYPE This notification is raised when radio link loses synchronization on its receiver. The mwrEmcRadioStatusIndex indicates each radio channel. | 1.3.6.1.4.1.7262.4.5.12.204.1 | current |
| mwrEmcRadioFailure NOTIFICATION-TYPE This notification is raised when fault is detected in radio. The reason could be faulty components or invalid configuration. The mwrEmcRadioStatusIndex indicates each radio channel. | 1.3.6.1.4.1.7262.4.5.12.204.2 | current |
| mwrEmcRadioCalUnavailable NOTIFICATION-TYPE This notification is raised when the calibration information is not available in the system. | 1.3.6.1.4.1.7262.4.5.12.204.3 | current |
| mwrEmcRadioRslBelowThreshold NOTIFICATION-TYPE This notification is raised when the receive signal level of the radio link is below the user configured limit. The mwrEmcRadioStatusIndex indicates each radio channel. | 1.3.6.1.4.1.7262.4.5.12.204.4 | current |
| mwrEmcRadioTxlAboveThreshold NOTIFICATION-TYPE This notification is raised when the radio transmit power level exceeds the user set limit. The mwrEmcRadioStatusIndex indicates each radio channel. | 1.3.6.1.4.1.7262.4.5.12.204.5 | current |
| mwrEmcRadioConfigMismatch NOTIFICATION-TYPE This notification is raised when the radio configuration between the peers is mismatched. | 1.3.6.1.4.1.7262.4.5.12.204.6 | current |