MIBs Depot

MWR-ETHERNET-MIB

Registered at
1.3.6.1.4.1.7262.4.5.1
1.3.6.1.4.1.7262.4.5.2
1.3.6.1.4.1.7262.4.5.3
1.3.6.1.4.1.7262.4.5.4
1.3.6.1.4.1.7262.4.5.5
1.3.6.1.4.1.7262.4.5.6
1.3.6.1.4.1.7262.4.5.7
1.3.6.1.4.1.7262.4.5.8
1.3.6.1.4.1.7262.4.5.9
1.3.6.1.4.1.7262.4.5.10
1.3.6.1.4.1.7262.4.5.11
1.3.6.1.4.1.7262.4.5.12
1.3.6.1.4.1.7262.4.5.13
1.3.6.1.4.1.7262.4.5.14
1.3.6.1.4.1.7262.4.5.15
1.3.6.1.4.1.7262.4.5.16
1.3.6.1.4.1.7262.4.5.17
1.3.6.1.4.1.7262.4.5.1000
Last updated
2014-10-08 14:06
Organization
Dragonwave Inc.
Revisions
2014-10-06 14:06
Namespace
dragonwave
Source file
MWR-ETHERNET-MIB
Digest
sha256:ebd46353392589f74e5cf4bf6f602472f45f6b132c85dca50ef67e0aa12f217c

Description

This specifies the contact information and the revision tracking information for the MIB module version.

Contact

http://www.dragonwaveinc.com 600-411 Legget Drive Ottawa, Ontario Canada, K2K 3C9 Tel : 613-599-9991 Fax: 613-599-4265 Support: 613-271-7010

Imports

FromSymbols
DWI-HARMONY-PRIVATE-MIBmwr
EQUIPMENT-COMMON-MIBEnableType, equipmentAlarmActiveConditionId, equipmentOutTrapsCounter, equipmentTrapInfo
INET-ADDRESS-MIBInetAddress, InetAddressType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

DWI-HARMONY-PRIVATE-MIB
EQUIPMENT-COMMON-MIB
INET-ADDRESS-MIB
MWR-ETHERNET-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Under this module's arcs

Where the registration tree carries on below this module.

ArcNameModule
1.3.6.1.4.1.7262.4.5.12.201mwrEmcRadioConfigurationsMWR-RADIO-MC-MIB
1.3.6.1.4.1.7262.4.5.12.202mwrEmcRadioStatusMWR-RADIO-MC-MIB
1.3.6.1.4.1.7262.4.5.12.203mwrEmcRadioPerformanceMWR-RADIO-MC-MIB
1.3.6.1.4.1.7262.4.5.12.204mwrEmcRadioNotificationsMWR-RADIO-MC-MIB

Textual conventions

NameOIDSyntaxAccessStatus
ClassType
TEXTUAL-CONVENTION
The Qos class numbers from 1 to 13.
current
FlowType
TEXTUAL-CONVENTION
The Qos flow numbers from 1 to 13.
current
PMIntervalType
TEXTUAL-CONVENTION
The available interval period for statistical counters.
current
PortType
TEXTUAL-CONVENTION
The list of system Ethernet ports
current
QueueType
TEXTUAL-CONVENTION
The queue numbers from 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
current
RadioInstanceType
TEXTUAL-CONVENTION
The radio instance type.
current

Objects

NameOIDSyntaxAccessStatus
mwrPlatformObjId
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.1
mwrEbandObjId
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.1.1
mwrEnhancedObjId
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.1.2
mwrSystem
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.2
mwrSystemConfigurations
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.2.1
mwrSystemType
OBJECT-TYPE
Available system types for single carrier and multi carriers systems are: onePlusZero1cr - 1+0 single carrier onePlusZero2cr - 1+0 dual carriers onePlusZero2crXpic - 1+0 dual carriers XPIC
1.3.6.1.4.1.7262.4.5.2.1.1INTEGER {onePlusZero1cr(1), onePlusZero2cr(2), onePlusZero2crXpic(3)}read-writecurrent
mwrPacketSwitchMode
OBJECT-TYPE
In bridge mode the system is always inband managed on any of the user ports. However in port-isolation mode, the system can be managed outOfBand or inband on a specific port.
1.3.6.1.4.1.7262.4.5.2.1.2INTEGER {bridge(1), port-isolation(2)}read-writecurrent
mwrSysSpeed
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.2.1.3
mwrSystemCurrentSpeed
OBJECT-TYPE
Changes the working speed of the system.
1.3.6.1.4.1.7262.4.5.2.1.3.1Integer32 (0..1000)read-writecurrent
mwrSystemStatus
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.2.2
mwrSystemOperStatus
OBJECT-TYPE
The current operational state of the system.
1.3.6.1.4.1.7262.4.5.2.2.1INTEGER {up(1), down(2)}read-onlycurrent
mwrSystemFaultSeverity
OBJECT-TYPE
The current state of the most serious system alarm severity. If system is running diagnostics, the status will be test.
1.3.6.1.4.1.7262.4.5.2.2.2INTEGER {noAlarm(1), test(2), warning(3), minor(4), major(5), critical(6)}read-onlycurrent
mwrSystemTemperature
OBJECT-TYPE
The current system temperature.
1.3.6.1.4.1.7262.4.5.2.2.3Integer32read-onlycurrent
mwrPlatformType
OBJECT-TYPE
Identifies the system platform type. The possible system types are: - eband - enhanced - enhanced-mc
1.3.6.1.4.1.7262.4.5.2.2.4INTEGER {eband(1), enhanced(2), enhanced-mc(3)}read-onlycurrent
mwrPacketSwitchModeStatus
OBJECT-TYPE
This object indicates the running configuration for the packet switch mode.
1.3.6.1.4.1.7262.4.5.2.2.5INTEGER {bridge(1), port-isolation(2)}read-onlycurrent
mwrSystemTypeStatus
OBJECT-TYPE
This object indicates the running configuration for the system type status.
1.3.6.1.4.1.7262.4.5.2.2.6INTEGER {onePlusZero1cr(1), onePlusZero2cr(2), onePlusZero2crXpic(3)}read-onlycurrent
mwrSystemCommands
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.2.3
mwrResetSystem
OBJECT-TYPE
Writing '1' to this object resets the system.
1.3.6.1.4.1.7262.4.5.2.3.1INTEGER {reset(1)}read-writecurrent
mwrSaveConfig
OBJECT-TYPE
Writing '1' or 'save' to this object saves running configuration of the system.
1.3.6.1.4.1.7262.4.5.2.3.2INTEGER {save(1)}read-writecurrent
mwrDeleteConfig
OBJECT-TYPE
Using this object, either the startup config or the switch config can be deleted. Deleting startup config removes all system configuration for next system restart. Deleting switch config only clears the switch configuration.
1.3.6.1.4.1.7262.4.5.2.3.3INTEGER {startup(1), switch(2)}read-writecurrent
mwrSystemInventory
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.2.4
mwrHwInventory
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.2.4.1
mwrMacAddress
OBJECT-TYPE
The MAC Address of the system.
1.3.6.1.4.1.7262.4.5.2.4.1.1DisplayStringread-onlycurrent
mwrTargetCfgFilePartNumber
OBJECT-TYPE
A textual string containing part number of the target configuration file.
1.3.6.1.4.1.7262.4.5.2.4.1.2DisplayStringread-onlycurrent
mwrUnitSerialNo
OBJECT-TYPE
A textual string containing Serial Number of the Unit.
1.3.6.1.4.1.7262.4.5.2.4.1.3DisplayStringread-onlycurrent
mwrUnitAssemblyNo
OBJECT-TYPE
A textual string containing the Assembly Number of the Unit.
1.3.6.1.4.1.7262.4.5.2.4.1.4DisplayStringread-onlycurrent
mwrBasebandSerialNo
OBJECT-TYPE
A textual string containing Serial no of the baseband.
1.3.6.1.4.1.7262.4.5.2.4.1.5DisplayStringread-onlycurrent
mwrBasebandAssemblyNo
OBJECT-TYPE
A textual string containing assembly no of the baseband.
1.3.6.1.4.1.7262.4.5.2.4.1.6DisplayStringread-onlycurrent
mwrPsuSerialNo
OBJECT-TYPE
A textual string containing Serial no of the PSU.
1.3.6.1.4.1.7262.4.5.2.4.1.7DisplayStringread-onlycurrent
mwrPsuAssemblyNo
OBJECT-TYPE
A textual string containing assembly no of the PSU.
1.3.6.1.4.1.7262.4.5.2.4.1.8DisplayStringread-onlycurrent
mwrRfSerialNo
OBJECT-TYPE
A textual string containing Serial no of the RF.
1.3.6.1.4.1.7262.4.5.2.4.1.9DisplayStringread-onlycurrent
mwrRfAssemblyNo
OBJECT-TYPE
A textual string containing assembly no of the RF.
1.3.6.1.4.1.7262.4.5.2.4.1.10DisplayStringread-onlycurrent
mwrRfRevisionNo
OBJECT-TYPE
A textual string containing revision no of the RF.
1.3.6.1.4.1.7262.4.5.2.4.1.11DisplayStringread-onlycurrent
mwrDiplexerSerialNo
OBJECT-TYPE
A textual string containing Serial no of the Diplexer.
1.3.6.1.4.1.7262.4.5.2.4.1.12DisplayStringread-onlycurrent
mwrDiplexerAssemblyNo
OBJECT-TYPE
A textual string containing assembly no of the Diplexer.
1.3.6.1.4.1.7262.4.5.2.4.1.13DisplayStringread-onlycurrent
mwrSystemCleiNo
OBJECT-TYPE
A textual string containing system CLEI code.
1.3.6.1.4.1.7262.4.5.2.4.1.14DisplayStringread-onlycurrent
mwrSwInventory
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.2.4.2
mwrSwInventoryTable
OBJECT-TYPE
Table containing the software inventory.
1.3.6.1.4.1.7262.4.5.2.4.2.1not-accessiblecurrent
mwrSwInventoryEntry
OBJECT-TYPE
Software inventory entry.
1.3.6.1.4.1.7262.4.5.2.4.2.1.1not-accessiblecurrent
mwrSwInvBank
OBJECT-TYPE
Software bank in the flash.
1.3.6.1.4.1.7262.4.5.2.4.2.1.1.1INTEGER {bankA(1), bankB(2)}not-accessiblecurrent
mwrSwInvStatus
OBJECT-TYPE
Software bank status.
1.3.6.1.4.1.7262.4.5.2.4.2.1.1.2INTEGER {active(1), backup(2)}read-onlycurrent
mwrSwInvOmniRelease
OBJECT-TYPE
The version number of the Omni.
1.3.6.1.4.1.7262.4.5.2.4.2.1.1.3DisplayStringread-onlycurrent
mwrSwInvTargetConfFileVersion
OBJECT-TYPE
The version number of the target configuration file.
1.3.6.1.4.1.7262.4.5.2.4.2.1.1.4DisplayStringread-onlycurrent
mwrSwInvMibVersion
OBJECT-TYPE
The version number of the system MIB.
1.3.6.1.4.1.7262.4.5.2.4.2.1.1.5DisplayStringread-onlycurrent
mwrSwInvSecurityVersion
OBJECT-TYPE
The version number of the security package.
1.3.6.1.4.1.7262.4.5.2.4.2.1.1.6DisplayStringread-onlycurrent
mwrSystemNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.2.5
mwrSoftware
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.3
mwrSoftwareConfigurations
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.3.1
mwrSoftwareStatus
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.3.2
mwrSwBackupBankStatus
OBJECT-TYPE
This object represents the status of the backup bank.
1.3.6.1.4.1.7262.4.5.3.2.1INTEGER {notValid(1), valid(2), upgrading(3)}read-onlycurrent
mwrSoftwareCommands
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.3.3
mwrSwCommit
OBJECT-TYPE
Writing '1' to this object commits all the active bank settings to the backup bank.
1.3.6.1.4.1.7262.4.5.3.3.1INTEGER {commit(1)}read-writecurrent
mwrSwSwitchBanks
OBJECT-TYPE
This objects switches bank to the specified bank. Next time the system resets, it loads up from that bank.
1.3.6.1.4.1.7262.4.5.3.3.2INTEGER {bankA(1), bankB(2)}read-writecurrent
mwrSoftwareNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.3.4
mwrLicensing
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.4
mwrLicensingConfigurations
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.4.1
mwrLicenseUpgradeKey
OBJECT-TYPE
The 33 Bytes licensing key used for upgrading features/capacity. Reading this object always returns an empty string.
1.3.6.1.4.1.7262.4.5.4.1.1OCTET STRING (SIZE(33))read-writecurrent
mwrLicensingStatus
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.4.2
mwrLicenseCount
OBJECT-TYPE
This object indicates the number of times the system has been upgraded/downgraded with features/capacity.
1.3.6.1.4.1.7262.4.5.4.2.1Integer32read-onlycurrent
mwrLicensedSpeed
OBJECT-TYPE
This object indicates the system licensed speed.
1.3.6.1.4.1.7262.4.5.4.2.2Integer32read-onlycurrent
mwrLicenseFeaturesTable
OBJECT-TYPE
A table containing supported system licensed features.
1.3.6.1.4.1.7262.4.5.4.2.3not-accessiblecurrent
mwrLicenseFeaturesEntry
OBJECT-TYPE
A table entry containing supported system licensed features.
1.3.6.1.4.1.7262.4.5.4.2.3.1not-accessiblecurrent
mwrLicenseFeatureIndex
OBJECT-TYPE
This object indicates the list of system features.
1.3.6.1.4.1.7262.4.5.4.2.3.1.1Integer32not-accessiblecurrent
mwrLicenseFeatureId
OBJECT-TYPE
2 ACM (includes WMA where applicable) (LF2) 3 Ethernet UNI (ELINE/ELAN MEF service) (LF3) 4 Packet Fragmentation (LF4) 5 Secured Access (LF5) 6 Ethernet OAM (802.1ag, 802.3ah, Y.1731) (LF6) 7 Advanced Performance Monitoring (LF7) 11 Bandwidth Accelerator (LF11) 13 Header Compression (LF13)
1.3.6.1.4.1.7262.4.5.4.2.3.1.2Integer32read-onlycurrent
mwrLicenseFeature
OBJECT-TYPE
The name of the feature.
1.3.6.1.4.1.7262.4.5.4.2.3.1.3DisplayStringread-onlycurrent
mwrLicenseFeatureStatus
OBJECT-TYPE
Specifies whether the feature is unlicensed or licensed.
1.3.6.1.4.1.7262.4.5.4.2.3.1.4INTEGER {unlicensed(1), licensed(2)}read-onlycurrent
mwrSyncE
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.5
mwrSyncEConfigurations
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.5.1
mwrSyncEState
OBJECT-TYPE
In manual mode, SyncE source will use primary clock source and when the primary source has loss of lock, the SyncE goes into holdover. The primary source will be used again after the system regains the lock on primary source. In auto mode, if the current clock source goes out of lock, the recovered clock from the other source will be used.
1.3.6.1.4.1.7262.4.5.5.1.1INTEGER {off(1), manual(2), auto(3)}read-writecurrent
mwrSyncEPrimarySource
OBJECT-TYPE
Selects which port to be used as SyncE master clock source.
1.3.6.1.4.1.7262.4.5.5.1.2INTEGER {gi01(1), gi02(2), gi03(3), gi04(4), radio(5), free-run(6)}read-writecurrent
mwrSyncESecondarySource
OBJECT-TYPE
Selects which port to be used as SyncE clock source when the master SyncE clock source is not available.
1.3.6.1.4.1.7262.4.5.5.1.3INTEGER {gi01(1), gi02(2), gi03(3), gi04(4), radio(5), free-run(6)}read-writecurrent
mwrSyncEMemberPorts
OBJECT-TYPE
Enter a string indicating all SyncE member ports. Example: gi01 gi04 Port options: gi01 gi02 gi03 gi04 radio
1.3.6.1.4.1.7262.4.5.5.1.4DisplayStringread-writecurrent
mwrSyncEForcedHoldover
OBJECT-TYPE
This forces SyncE into holdover mode. After the configurable timeout value, the forced holdover will be taken out. The forced timeout can be 0 to 300sec, where 0 means infinite and default is 30sec. An example of the format of the string is as follows: 'on 20' or 'off'. The second parameter indicates the holdover time in sec. The single quote marks i.e. ' ' are not used in the command.
1.3.6.1.4.1.7262.4.5.5.1.5DisplayStringread-writecurrent
mwrSyncERevertive
OBJECT-TYPE
In revertive mode, if the current source is secondary and the primary is Ok for configured amount of time, the primary will be used. The default revertive time is 10sec. An example of the format of the string is as follows: 'on 20' or 'off'. The second parameter when revertive is turned on is the time in sec. The single quote marks i.e. ' ' are not used in the command.
1.3.6.1.4.1.7262.4.5.5.1.6DisplayStringread-writecurrent
mwrSyncEWanderFilter
OBJECT-TYPE
ITU G.8262 specifies different wander filter requirements for networks based on the 2.048 kbit/s hierarchy , option1, vs those based on the 1.544kbit/s hierarchy, option2. Option 2 specifies a low pass filter bandwidth of 0.1Hz, while option1 specifies a bandwidth between 1 and 10 Hz.
1.3.6.1.4.1.7262.4.5.5.1.7INTEGER {option1(1), option2(2)}read-writecurrent
mwrSyncEStatus
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.5.2
mwrSyncEClockSource
OBJECT-TYPE
Retrieves SyncE clock source currently in use.
1.3.6.1.4.1.7262.4.5.5.2.1INTEGER {gi01(1), gi02(2), gi03(3), gi04(4), radio(5), free-run(6)}read-onlycurrent
mwrSyncEAcquisitionStatus
OBJECT-TYPE
Retrieves SyncE acquisition status.
1.3.6.1.4.1.7262.4.5.5.2.2DisplayStringread-onlycurrent
mwrSyncENotifications
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.5.3
mwrTiming
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.6
mwrTimingConfigurations
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.6.1
mwrDateTime
OBJECT-TYPE
The system date and time.
1.3.6.1.4.1.7262.4.5.6.1.1DateAndTimeread-writecurrent
mwrSntpEnable
OBJECT-TYPE
Indicates whether SNTP feature is enabled.
1.3.6.1.4.1.7262.4.5.6.1.2EnableTyperead-writecurrent
mwrSntpOffset
OBJECT-TYPE
System time offset from GMT in tenths of hours. For example, an offset of 10 indicates 10 tenths, or 1 hour. An offset of 5 indicates half an hour.
1.3.6.1.4.1.7262.4.5.6.1.3Integer32 (-140..140)read-writecurrent
mwrSntpServerTable
OBJECT-TYPE
Table containing SNTP server entries
1.3.6.1.4.1.7262.4.5.6.1.4not-accessiblecurrent
mwrSntpServerEntry
OBJECT-TYPE
Contains the SNTP server information
1.3.6.1.4.1.7262.4.5.6.1.4.1not-accessiblecurrent
mwrSntpServerIndex
OBJECT-TYPE
A unique value for each server.
1.3.6.1.4.1.7262.4.5.6.1.4.1.1Integer32 (1..5)not-accessiblecurrent
mwrSntpServerDomain
OBJECT-TYPE
Indicates SNTP server inet address type. Valid types are ipv4 or ipv6.
1.3.6.1.4.1.7262.4.5.6.1.4.1.2InetAddressTyperead-writecurrent
mwrSntpServerAddress
OBJECT-TYPE
Indicates SNTP server inet address octet string.
1.3.6.1.4.1.7262.4.5.6.1.4.1.3InetAddressread-writecurrent
mwrSntpServerStatus
OBJECT-TYPE
The status of the SNTP server.
1.3.6.1.4.1.7262.4.5.6.1.4.1.4INTEGER {good(1), failed(2)}read-onlycurrent
mwrSntpServerStratum
OBJECT-TYPE
Specifies the stratum of a server, 0 for failed server
1.3.6.1.4.1.7262.4.5.6.1.4.1.5Integer32read-onlycurrent
mwrTimingStatus
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.6.2
mwrTimingLastDateTimeChanged
OBJECT-TYPE
Date and Time for the last system time adjustment.
1.3.6.1.4.1.7262.4.5.6.2.1DateAndTimeread-onlycurrent
mwrTimingLastTimeAdjustment
OBJECT-TYPE
Last system time adjustment in hundredths of seconds.
1.3.6.1.4.1.7262.4.5.6.2.2Integer32read-onlycurrent
mwrTimingCummulativeTimeChange
OBJECT-TYPE
Cumulative system time adjustment in hundredths of seconds.
1.3.6.1.4.1.7262.4.5.6.2.3Integer32read-onlycurrent
mwrTimingCommands
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.6.3
mwrSntpRestoreDefault
OBJECT-TYPE
Restores SNTP servers to default Addresses.
1.3.6.1.4.1.7262.4.5.6.3.1INTEGER {restore(1)}read-writecurrent
mwrTimingNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.6.4
mwrAAA
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.7
mwrAAAConfigurations
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.7.1
mwrAAAUserAuthentication
OBJECT-TYPE
This object configures the user authentication method.
1.3.6.1.4.1.7262.4.5.7.1.1INTEGER {internal(1), radius(2)}read-writecurrent
mwrRadiusConfigurations
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.7.1.2
mwrRadiusAdminUserStrict
OBJECT-TYPE
If strict mode is off, the admin user can login when radius is turned off or unreachable. When strict mode is on, admin user will only be authenticated against the radius server.
1.3.6.1.4.1.7262.4.5.7.1.2.1INTEGER {off(1), on(2)}read-writecurrent
mwrRadiusServerTimeOut
OBJECT-TYPE
Timeout period for authentication requests
1.3.6.1.4.1.7262.4.5.7.1.2.2Integer32read-writecurrent
mwrRadiusServerDeadTime
OBJECT-TYPE
Time to declare an unresponsive server 'dead'
1.3.6.1.4.1.7262.4.5.7.1.2.3Integer32read-writecurrent
mwrRadiusServerReTransmit
OBJECT-TYPE
Maximum number of retransmits to an unresponsive server
1.3.6.1.4.1.7262.4.5.7.1.2.4Integer32read-writecurrent
mwrRadiusServerTable
OBJECT-TYPE
Table containing radius server entries
1.3.6.1.4.1.7262.4.5.7.1.2.5not-accessiblecurrent
mwrRadiusServerEntry
OBJECT-TYPE
Contains the SNTP server information
1.3.6.1.4.1.7262.4.5.7.1.2.5.1not-accessiblecurrent
mwrRadiusServerIndex
OBJECT-TYPE
A unique value for each radius server.
1.3.6.1.4.1.7262.4.5.7.1.2.5.1.1Integer32 (1..5)not-accessiblecurrent
mwrRadiusCfgdHostDomain
OBJECT-TYPE
Indicates configured radius inet address type. Valid types are ipv4 or ipv6.
1.3.6.1.4.1.7262.4.5.7.1.2.5.1.2InetAddressTyperead-writecurrent
mwrRadiusCfgdHostAddress
OBJECT-TYPE
Indicates configured radius server inet address octet string.
1.3.6.1.4.1.7262.4.5.7.1.2.5.1.3InetAddressread-writecurrent
mwrRadiusCfgdHostKey
OBJECT-TYPE
The key of the configured radius server.
1.3.6.1.4.1.7262.4.5.7.1.2.5.1.4DisplayString (SIZE(0..32))read-writecurrent
mwrNetworking
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.8
mwrNetworkingConfigurations
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.8.1
mwrNetMgmtPriority
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.8.1.1
mwrNetMgmtVlanPriority
OBJECT-TYPE
The object configures the VLAN priority(0...7)
1.3.6.1.4.1.7262.4.5.8.1.1.1Integer32 (0..7)read-writecurrent
mwrNetMgmtDscp
OBJECT-TYPE
The Differentiated Services Code Point (DSCP) of IP traffic generated by the system (0...63)
1.3.6.1.4.1.7262.4.5.8.1.1.2Integer32read-writecurrent
mwrNetMgmtIpv4
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.8.1.2
mwrIpv4Table
OBJECT-TYPE
A table containing the IPv4 information.
1.3.6.1.4.1.7262.4.5.8.1.2.1not-accessiblecurrent
mwrIpv4Entry
OBJECT-TYPE
A table entry containing the IPv4 information.
1.3.6.1.4.1.7262.4.5.8.1.2.1.1not-accessiblecurrent
mwrIpv4Index
OBJECT-TYPE
The IPv4 table index. There is only one entry in this table and can not be deleted.
1.3.6.1.4.1.7262.4.5.8.1.2.1.1.1Integer32 (1)not-accessiblecurrent
mwrIpv4Address
OBJECT-TYPE
The IPv4 address of the system.
1.3.6.1.4.1.7262.4.5.8.1.2.1.1.2IpAddressread-writecurrent
mwrIpv4SubnetMask
OBJECT-TYPE
The IPv4 subnet mask of the system.
1.3.6.1.4.1.7262.4.5.8.1.2.1.1.3IpAddressread-writecurrent
mwrIpv4DefaultGateway
OBJECT-TYPE
The IPv4 default gateway of the system.
1.3.6.1.4.1.7262.4.5.8.1.2.1.1.4IpAddressread-writecurrent
mwrIpv4RowStatus
OBJECT-TYPE
This object is used for applying ipv4 configuration attributes simultaneously.
1.3.6.1.4.1.7262.4.5.8.1.2.1.1.5RowStatusread-writecurrent
mwrSecondaryGateway
OBJECT-TYPE
The IPv4 secondary gateway of the system.
1.3.6.1.4.1.7262.4.5.8.1.2.2IpAddressread-writecurrent
mwrNetMgmttIpv6
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.8.1.3
mwrIpv6Table
OBJECT-TYPE
A table containing the IPv6 information.
1.3.6.1.4.1.7262.4.5.8.1.3.1not-accessiblecurrent
mwrIpv6Entry
OBJECT-TYPE
A table entry containing the IPv6 information.
1.3.6.1.4.1.7262.4.5.8.1.3.1.1not-accessiblecurrent
mwrIpv6Index
OBJECT-TYPE
The IPv6 table index. There is only one entry in this table and can not be deleted.
1.3.6.1.4.1.7262.4.5.8.1.3.1.1.1Integer32 (1)not-accessiblecurrent
mwrIpv6Domain
OBJECT-TYPE
Indicates ipv6 inet address type.
1.3.6.1.4.1.7262.4.5.8.1.3.1.1.2InetAddressTyperead-onlycurrent
mwrIpv6Address
OBJECT-TYPE
Indicates IPv6 inet address octet string.
1.3.6.1.4.1.7262.4.5.8.1.3.1.1.3InetAddressread-writecurrent
mwrIpv6Prefix
OBJECT-TYPE
Indicates ipv6 prefix.
1.3.6.1.4.1.7262.4.5.8.1.3.1.1.4Integer32read-writecurrent
mwrIpv6GatewayDomain
OBJECT-TYPE
Indicates IPv6 gateway inet address type. This will always return IPv6 inet address type.
1.3.6.1.4.1.7262.4.5.8.1.3.1.1.5InetAddressTyperead-onlycurrent
mwrIpv6GatewayAddress
OBJECT-TYPE
Indicates IPv6 gateway inet address octet string.
1.3.6.1.4.1.7262.4.5.8.1.3.1.1.6InetAddressread-writecurrent
mwrIpv6RowStatus
OBJECT-TYPE
This object is used for applying IPv6 configuration attributes simultaneously.
1.3.6.1.4.1.7262.4.5.8.1.3.1.1.7RowStatusread-writecurrent
mwrSecondaryIpv6GatewayDomain
OBJECT-TYPE
This object will return the secondary IPv6 gateway inet address type.
1.3.6.1.4.1.7262.4.5.8.1.3.2InetAddressTyperead-onlycurrent
mwrSecondaryIpv6GatewayAddress
OBJECT-TYPE
This object will return the secondary IPv6 gateway inet address.
1.3.6.1.4.1.7262.4.5.8.1.3.3InetAddressread-writecurrent
mwrUserInterfaceMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.8.1.4
mwrTelnetEnable
OBJECT-TYPE
Indicates whether telnet access is allowed.
1.3.6.1.4.1.7262.4.5.8.1.4.1EnableTyperead-writecurrent
mwrSshEnable
OBJECT-TYPE
Indicates whether ssh access is allowed. This configuration only applies to security mode.
1.3.6.1.4.1.7262.4.5.8.1.4.2EnableTyperead-writecurrent
mwrHttpEnable
OBJECT-TYPE
Indicates whether http is enabled.
1.3.6.1.4.1.7262.4.5.8.1.4.3EnableTyperead-writecurrent
mwrHttpsEnable
OBJECT-TYPE
Indicates whether secured http access is allowed. This configuration only applies to security mode.
1.3.6.1.4.1.7262.4.5.8.1.4.4EnableTyperead-writecurrent
mwrSnmpv1v2cEnable
OBJECT-TYPE
Indicates whether SNMP v1/v2c is allowed in security mode. This configuration only applies to security mode.
1.3.6.1.4.1.7262.4.5.8.1.4.5EnableTyperead-writecurrent
mwrFtpEnable
OBJECT-TYPE
This object allows enabling or disabling ftp when in secure mode. By default ftp is enabled.
1.3.6.1.4.1.7262.4.5.8.1.4.6EnableTyperead-writecurrent
mwrFileTransfer
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.8.1.5
mwrFileXfrDirection
OBJECT-TYPE
The behavior of the FTP/SFTP machine: 1 - ServerMode 2 - ClientMode 3 - both Server and Client available Mwr 1.0 just supports Client Mode.
1.3.6.1.4.1.7262.4.5.8.1.5.1INTEGER {serverMode(1), clientMode(2), both(3)}read-writecurrent
mwrFileXfrTable
OBJECT-TYPE
Table containing the FTP client parameters.
1.3.6.1.4.1.7262.4.5.8.1.5.2not-accessiblecurrent
mwrFileXfrEntry
OBJECT-TYPE
Table entry containing the FTP client parameters.
1.3.6.1.4.1.7262.4.5.8.1.5.2.1not-accessiblecurrent
mwrFileXfrSeqID
OBJECT-TYPE
For the same manager, the possibility to define different FTP/SFTP transfer actions.
1.3.6.1.4.1.7262.4.5.8.1.5.2.1.1Integer32 (1..20)not-accessiblecurrent
mwrFileXfrIdentifier
OBJECT-TYPE
The identifier of the type of file to be imported/exported.
1.3.6.1.4.1.7262.4.5.8.1.5.2.1.2INTEGER {omni(1), tcfFile(2), configFile(3), eventLog(4), pmFile(5), security(6), perfLog(7)}read-createcurrent
mwrFileXfrName
OBJECT-TYPE
The Name of the file to be imported/exported.
1.3.6.1.4.1.7262.4.5.8.1.5.2.1.3DisplayString (SIZE(1..32))read-createcurrent
mwrFileXfrMode
OBJECT-TYPE
The file transfer mode specifying either a ftp or sftp request. The sftp mode is only supported when security is licensed/installed.
1.3.6.1.4.1.7262.4.5.8.1.5.2.1.4INTEGER {ftp(1), sftp(2)}read-createcurrent
mwrFileXfrServerDomain
OBJECT-TYPE
The server domain such as IPv4 or IPv6 type.
1.3.6.1.4.1.7262.4.5.8.1.5.2.1.5InetAddressTyperead-createcurrent
mwrFileXfrServerAddress
OBJECT-TYPE
The server IP address in InetAddress format which could be an IPv4 or IPv6 address.
1.3.6.1.4.1.7262.4.5.8.1.5.2.1.6InetAddressread-createcurrent
mwrFileXfrClientDirection
OBJECT-TYPE
The behavior of the FTP or SFTP Client: 1 - import, i.e. download data file 2 - export, i.e. upload data file. The only supported option for omni and tcf is import since these files are used only in upgrade case. Also the supported option for pm, eventlog and perfLog is export option. The rest can be imported or exported.
1.3.6.1.4.1.7262.4.5.8.1.5.2.1.7INTEGER {import(1), export(2)}read-createcurrent
mwrFileXfrUserName
OBJECT-TYPE
FTP or SFTP User Name when Client Mode is selected.
1.3.6.1.4.1.7262.4.5.8.1.5.2.1.8DisplayString (SIZE(1..32))read-createcurrent
mwrFileXfrPassword
OBJECT-TYPE
FTP or SFTP password when Client Mode is selected. For get operation - the returned value will be zero length string.
1.3.6.1.4.1.7262.4.5.8.1.5.2.1.9DisplayString (SIZE(1..32))read-createcurrent
mwrFileXfrNumEntries
OBJECT-TYPE
This object is used to indicate the number of entries for the performance log to be transferred. If it's set to zero, it will transfer the entire file.
1.3.6.1.4.1.7262.4.5.8.1.5.2.1.10Integer32read-createcurrent
mwrFileXfrStatus
OBJECT-TYPE
This object contains the current status of the last requested import/export of the corresponding row component.
1.3.6.1.4.1.7262.4.5.8.1.5.2.1.11INTEGER {success(1), inProgress(2), failed(3)}read-onlycurrent
mwrFileXfrRowStatus
OBJECT-TYPE
The row status variable, used according to: - Manager can create a row using the createAndWait. - Once created, the row is put into notInService by Agent. - On Manager request, row status can be set to active one at a time. This means that the Client has to start the file transfer. - Row data, such as the FileServerAddress, User Name or Password can be changed once the row has been created, but only if this field is set to notInService. All other fields can not be set once the row is created, but the row must be removed and created again. - Manager can use destroy to remove the row.
1.3.6.1.4.1.7262.4.5.8.1.5.2.1.12RowStatusread-createcurrent
mwrNetMgmtInterfaceTable
OBJECT-TYPE
Table containing the network management interface configurations.
1.3.6.1.4.1.7262.4.5.8.1.6not-accessiblecurrent
mwrNetMgmtInterfaceEntry
OBJECT-TYPE
Entry for the network management interface table.
1.3.6.1.4.1.7262.4.5.8.1.6.1not-accessiblecurrent
mwrNetMgmtInterfaceIndex
OBJECT-TYPE
This object is an index to network management interface table. There will always be one entry in this table.
1.3.6.1.4.1.7262.4.5.8.1.6.1.1Integer32not-accessiblecurrent
mwrNetMgmtVlanId
OBJECT-TYPE
Indicates the VLAN Id (1...4090)
1.3.6.1.4.1.7262.4.5.8.1.6.1.2Integer32 (1..4090)read-writecurrent
mwrNetMgmtInterface1
OBJECT-TYPE
When this object is enabled the gi0/1 port will be configured as a management port. Also the corresponding mode (inband/outOfBand) should be set as well.
1.3.6.1.4.1.7262.4.5.8.1.6.1.3EnableTyperead-writecurrent
mwrNetMgmtInterface1Mode
OBJECT-TYPE
This object indicates whether the gi0/1 management interface is inband or outOfBand. This applies only when the packet switch mode is configured in port isolation mode. In Bridge mode setup, this will always be inband.
1.3.6.1.4.1.7262.4.5.8.1.6.1.4INTEGER {inband(1), outOfBand(2), none(3)}read-writecurrent
mwrNetMgmtInterface1Tagged
OBJECT-TYPE
This object indicates whether the system will be managed with vlan tagged management traffic or not.
1.3.6.1.4.1.7262.4.5.8.1.6.1.5INTEGER {no-vlan-tag(1), vlan-tag(2)}read-writecurrent
mwrNetMgmtInterface2
OBJECT-TYPE
When this object is enabled the gi0/2 port will be configured as a management port. Also the corresponding mode (inband/outOfBand) should be set as well.
1.3.6.1.4.1.7262.4.5.8.1.6.1.6EnableTyperead-writecurrent
mwrNetMgmtInterface2Mode
OBJECT-TYPE
This object indicates whether the gi0/2 management interface is inband or outOfBand. This applies only when the packet switch mode is configured in port isolation mode. In Bridge mode setup, this will always be inband.
1.3.6.1.4.1.7262.4.5.8.1.6.1.7INTEGER {inband(1), outOfBand(2), none(3)}read-writecurrent
mwrNetMgmtInterface2Tagged
OBJECT-TYPE
This object indicates whether the system will be managed with vlan tagged management traffic or not.
1.3.6.1.4.1.7262.4.5.8.1.6.1.8INTEGER {no-vlan-tag(1), vlan-tag(2)}read-writecurrent
mwrNetMgmtInterface3
OBJECT-TYPE
When this object is enabled the gi0/3 port will be configured as a management port. Also the corresponding mode (inband/outOfBand) should be set as well.
1.3.6.1.4.1.7262.4.5.8.1.6.1.9EnableTyperead-writecurrent
mwrNetMgmtInterface3Mode
OBJECT-TYPE
This object indicates whether the gi0/3 management interface is inband or outOfBand. This applies only when the packet switch mode is configured in port isolation mode. In Bridge mode setup, this will always be inband.
1.3.6.1.4.1.7262.4.5.8.1.6.1.10INTEGER {inband(1), outOfBand(2), none(3)}read-writecurrent
mwrNetMgmtInterface3Tagged
OBJECT-TYPE
This object indicates whether the system will be managed with vlan tagged management traffic or not.
1.3.6.1.4.1.7262.4.5.8.1.6.1.11INTEGER {no-vlan-tag(1), vlan-tag(2)}read-writecurrent
mwrNetMgmtInterface4
OBJECT-TYPE
When this object is enabled the gi0/4 port will be configured as a management port. Also the corresponding mode (inband/outOfBand) should be set as well.
1.3.6.1.4.1.7262.4.5.8.1.6.1.12EnableTyperead-writecurrent
mwrNetMgmtInterface4Mode
OBJECT-TYPE
This object indicates whether the gi0/4 management interface is inband or outOfBand. This applies only when the packet switch mode is configured in port isolation mode. In Bridge mode setup, this will always be inband.
1.3.6.1.4.1.7262.4.5.8.1.6.1.13INTEGER {inband(1), outOfBand(2), none(3)}read-writecurrent
mwrNetMgmtInterface4Tagged
OBJECT-TYPE
This object indicates whether the system will be managed with vlan tagged management traffic or not.
1.3.6.1.4.1.7262.4.5.8.1.6.1.14INTEGER {no-vlan-tag(1), vlan-tag(2)}read-writecurrent
mwrNetMgmtInterfaceRowStatus
OBJECT-TYPE
This object is used for applying all management interface configuration in an atomic operation.
1.3.6.1.4.1.7262.4.5.8.1.6.1.15RowStatusread-writecurrent
mwrNetworkingStatus
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.8.2
mwrMaintenanceIpv4
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.8.2.1
mwrMaintenanceIpv4Address
OBJECT-TYPE
This object indicates the maintenance IPv4 address.
1.3.6.1.4.1.7262.4.5.8.2.1.1IpAddressread-onlycurrent
mwrMaintenanceSubnetMask
OBJECT-TYPE
This object indicates the maintenance IPv4 subnet mask.
1.3.6.1.4.1.7262.4.5.8.2.1.2IpAddressread-onlycurrent
mwrActiveIpv4Gateway
OBJECT-TYPE
This object indicates the active IPv4 gateway.
1.3.6.1.4.1.7262.4.5.8.2.1.3IpAddressread-onlycurrent
mwrMaintenanceIpv6
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.8.2.2
mwrIpv6LinkLocalIPrefix
OBJECT-TYPE
This object indicates the IPv6 link local prefix.
1.3.6.1.4.1.7262.4.5.8.2.2.1Integer32read-onlycurrent
mwrIpv6LinkLocalAddress
OBJECT-TYPE
Indicates ipv6 link local inet address octet string.
1.3.6.1.4.1.7262.4.5.8.2.2.2InetAddressread-onlycurrent
mwrActiveIpv6Gateway
OBJECT-TYPE
This object indicates the active IPv6 gateway.
1.3.6.1.4.1.7262.4.5.8.2.2.3InetAddressread-onlycurrent
mwrPeerNetworkingStatus
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.8.3
mwrPeerMacAddress
OBJECT-TYPE
The MAC Address of the peer.
1.3.6.1.4.1.7262.4.5.8.3.1DisplayStringread-onlycurrent
mwrPeerIpv4Address
OBJECT-TYPE
The peer IPv4 Address.
1.3.6.1.4.1.7262.4.5.8.3.2IpAddressread-onlycurrent
mwrPeerIpv4SubnetMask
OBJECT-TYPE
The peer IPv4 subnet mask.
1.3.6.1.4.1.7262.4.5.8.3.3IpAddressread-onlycurrent
mwrPeerIpv4DefaultGateway
OBJECT-TYPE
The peer IPv4 default gateway.
1.3.6.1.4.1.7262.4.5.8.3.4IpAddressread-onlycurrent
mwrPeerIpv6Prefix
OBJECT-TYPE
The peer IPv6 prefix.
1.3.6.1.4.1.7262.4.5.8.3.5Integer32read-onlycurrent
mwrPeerIpv6Domain
OBJECT-TYPE
The peer IPv6 domain.
1.3.6.1.4.1.7262.4.5.8.3.6InetAddressTyperead-onlycurrent
mwrPeerIpv6Address
OBJECT-TYPE
The peer IPv6 address.
1.3.6.1.4.1.7262.4.5.8.3.7InetAddressread-onlycurrent
mwrPeerIpv6GatewayDomain
OBJECT-TYPE
The peer IPv6 gateway domain
1.3.6.1.4.1.7262.4.5.8.3.8InetAddressTyperead-onlycurrent
mwrPeerIpv6GatewayAddress
OBJECT-TYPE
The peer IPv6 gateway address.
1.3.6.1.4.1.7262.4.5.8.3.9InetAddressread-onlycurrent
mwrPeerVlanId
OBJECT-TYPE
The peer vlan Id.
1.3.6.1.4.1.7262.4.5.8.3.10Integer32read-onlycurrent
mwrPeerVlanPriority
OBJECT-TYPE
The peer vlan priority.
1.3.6.1.4.1.7262.4.5.8.3.11Integer32read-onlycurrent
mwrPeerDscp
OBJECT-TYPE
The peer management dscp.
1.3.6.1.4.1.7262.4.5.8.3.12Integer32read-onlycurrent
mwrNetworkingNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.8.4
mwrEthernet
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.9
mwrEthernetConfigurations
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.9.1
mwrQos
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.9.1.1
mwrQosState
OBJECT-TYPE
Indicates whether QOS is enabled.
1.3.6.1.4.1.7262.4.5.9.1.1.1EnableTyperead-writecurrent
mwrCosSource
OBJECT-TYPE
Indicates the class of service tag type. Based on the setting system will use the CoS value in the outer VLAN tag, inner VLAN tag, DSCP or MPLS exp.
1.3.6.1.4.1.7262.4.5.9.1.1.2INTEGER {oTag(1), iTag(2), dscp(3), mplsExp(4)}read-writecurrent
mwrOuterTpid
OBJECT-TYPE
Sets the value of the Q-in-Q outer tag. This tag is also used to classify the single tagged traffic. Default value is 0x8100.
1.3.6.1.4.1.7262.4.5.9.1.1.3DisplayStringread-writecurrent
mwrInnerTpid
OBJECT-TYPE
Sets the value of the Q-in-Q inner VLAN tag. Default value is 0x8100.
1.3.6.1.4.1.7262.4.5.9.1.1.4DisplayStringread-writecurrent
mwrCosTable
OBJECT-TYPE
A table of Qos Settings per port, the configuration corresponds to the egress QoS of radio port.
1.3.6.1.4.1.7262.4.5.9.1.1.5not-accessiblecurrent
mwrCosEntry
OBJECT-TYPE
An entry of Qos setting per port
1.3.6.1.4.1.7262.4.5.9.1.1.5.1not-accessiblecurrent
mwrCosIndex
OBJECT-TYPE
A unique name identifying each enet port in port isolation mode or the bridgeMode index when system is configured in bridge mode.
1.3.6.1.4.1.7262.4.5.9.1.1.5.1.1INTEGER {gi01(1), gi02(2), gi03(3), gi04(4), bridgeMode(5)}not-accessiblecurrent
mwrCos0
OBJECT-TYPE
User queue assignments for CoS0. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
1.3.6.1.4.1.7262.4.5.9.1.1.5.1.2QueueTyperead-writecurrent
mwrCos1
OBJECT-TYPE
User queue assignments for CoS1. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
1.3.6.1.4.1.7262.4.5.9.1.1.5.1.3QueueTyperead-writecurrent
mwrCos2
OBJECT-TYPE
User queue assignments for CoS2. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
1.3.6.1.4.1.7262.4.5.9.1.1.5.1.4QueueTyperead-writecurrent
mwrCos3
OBJECT-TYPE
User queue assignments for CoS3. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
1.3.6.1.4.1.7262.4.5.9.1.1.5.1.5QueueTyperead-writecurrent
mwrCos4
OBJECT-TYPE
User queue assignments for CoS4. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
1.3.6.1.4.1.7262.4.5.9.1.1.5.1.6QueueTyperead-writecurrent
mwrCos5
OBJECT-TYPE
User queue assignments for CoS5. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
1.3.6.1.4.1.7262.4.5.9.1.1.5.1.7QueueTyperead-writecurrent
mwrCos6
OBJECT-TYPE
User queue assignments for CoS6. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
1.3.6.1.4.1.7262.4.5.9.1.1.5.1.8QueueTyperead-writecurrent
mwrCos7
OBJECT-TYPE
User queue assignments for CoS7. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
1.3.6.1.4.1.7262.4.5.9.1.1.5.1.9QueueTyperead-writecurrent
mwrCosRowStatus
OBJECT-TYPE
Row status for CoS queue mapping. This object is used to apply all CoS settings simultaneously.
1.3.6.1.4.1.7262.4.5.9.1.1.5.1.10RowStatusread-writecurrent
mwrCosDefValueTable
OBJECT-TYPE
A table containing the CoS default value, the configuration corresponds to the egress QoS of radio port.
1.3.6.1.4.1.7262.4.5.9.1.1.6not-accessiblecurrent
mwrCosDefValueEntry
OBJECT-TYPE
A table entry containing the CoS default value.
1.3.6.1.4.1.7262.4.5.9.1.1.6.1not-accessiblecurrent
mwrCosDefValueIndex
OBJECT-TYPE
Specifies CoS default value for each port in port isolation or in bridge mode.
1.3.6.1.4.1.7262.4.5.9.1.1.6.1.1INTEGER {gi01(1), gi02(2), gi03(3), gi04(4), bridgeMode(5)}not-accessiblecurrent
mwrCosDefValue
OBJECT-TYPE
Specifies CoS default value for each port in port isolation or in bridge mode.
1.3.6.1.4.1.7262.4.5.9.1.1.6.1.2Integer32read-writecurrent
mwrCirQTable
OBJECT-TYPE
A table containing the CIR value for each queue, the configuration corresponds to the egress QoS of radio port.
1.3.6.1.4.1.7262.4.5.9.1.1.7not-accessiblecurrent
mwrCirQEntry
OBJECT-TYPE
A table entry containing the CIR value for each radio queue.
1.3.6.1.4.1.7262.4.5.9.1.1.7.1not-accessiblecurrent
mwrCirQIndex
OBJECT-TYPE
Specifies CIR queue index for each radio queue.
1.3.6.1.4.1.7262.4.5.9.1.1.7.1.1QueueTypenot-accessiblecurrent
mwrCirQ1
OBJECT-TYPE
User CIR setting for queue 1.
1.3.6.1.4.1.7262.4.5.9.1.1.7.1.2Integer32read-writecurrent
mwrCirQ2
OBJECT-TYPE
User CIR setting for queue 2.
1.3.6.1.4.1.7262.4.5.9.1.1.7.1.3Integer32read-writecurrent
mwrCirQ3
OBJECT-TYPE
User CIR setting for queue 3.
1.3.6.1.4.1.7262.4.5.9.1.1.7.1.4Integer32read-writecurrent
mwrCirQ4
OBJECT-TYPE
User CIR setting for queue 4.
1.3.6.1.4.1.7262.4.5.9.1.1.7.1.5Integer32read-writecurrent
mwrCirQ5
OBJECT-TYPE
User CIR setting for queue 5.
1.3.6.1.4.1.7262.4.5.9.1.1.7.1.6Integer32read-writecurrent
mwrCirQ6
OBJECT-TYPE
User CIR setting for queue 6.
1.3.6.1.4.1.7262.4.5.9.1.1.7.1.7Integer32read-writecurrent
mwrCirQ7
OBJECT-TYPE
User CIR setting for queue 7.
1.3.6.1.4.1.7262.4.5.9.1.1.7.1.8Integer32read-writecurrent
mwrCirQ8
OBJECT-TYPE
User CIR setting for queue 8.
1.3.6.1.4.1.7262.4.5.9.1.1.7.1.9Integer32read-writecurrent
mwrCirQRowStatus
OBJECT-TYPE
The CIR table Row status. This object is used to apply all queue CIR settings simultaneously.
1.3.6.1.4.1.7262.4.5.9.1.1.7.1.10RowStatusread-writecurrent
mwrCbsQTable
OBJECT-TYPE
A table containing CBS settings for each queue, the configuration corresponds to the egress QoS of radio port.
1.3.6.1.4.1.7262.4.5.9.1.1.8not-accessiblecurrent
mwrCbsQEntry
OBJECT-TYPE
A table entry containing CBS settings for each queue.
1.3.6.1.4.1.7262.4.5.9.1.1.8.1not-accessiblecurrent
mwrCbsQIndex
OBJECT-TYPE
Specifies CBS queue index for each radio queue.
1.3.6.1.4.1.7262.4.5.9.1.1.8.1.1QueueTypenot-accessiblecurrent
mwrCbsQ1
OBJECT-TYPE
User CBS setting for queue 1.
1.3.6.1.4.1.7262.4.5.9.1.1.8.1.2Integer32read-writecurrent
mwrCbsQ2
OBJECT-TYPE
User CBS setting for queue 2.
1.3.6.1.4.1.7262.4.5.9.1.1.8.1.3Integer32read-writecurrent
mwrCbsQ3
OBJECT-TYPE
User CBS setting for queue 3.
1.3.6.1.4.1.7262.4.5.9.1.1.8.1.4Integer32read-writecurrent
mwrCbsQ4
OBJECT-TYPE
User CBS setting for queue 4.
1.3.6.1.4.1.7262.4.5.9.1.1.8.1.5Integer32read-writecurrent
mwrCbsQ5
OBJECT-TYPE
User CBS setting for queue 5.
1.3.6.1.4.1.7262.4.5.9.1.1.8.1.6Integer32read-writecurrent
mwrCbsQ6
OBJECT-TYPE
User CBS setting for queue 6.
1.3.6.1.4.1.7262.4.5.9.1.1.8.1.7Integer32read-writecurrent
mwrCbsQ7
OBJECT-TYPE
User CBS setting for queue 7.
1.3.6.1.4.1.7262.4.5.9.1.1.8.1.8Integer32read-writecurrent
mwrCbsQ8
OBJECT-TYPE
User CBS setting for queue 8.
1.3.6.1.4.1.7262.4.5.9.1.1.8.1.9Integer32read-writecurrent
mwrCbsQRowStatus
OBJECT-TYPE
The CBS table Row status. This object is used to apply all queue CBS settings simultaneously.
1.3.6.1.4.1.7262.4.5.9.1.1.8.1.10RowStatusread-writecurrent
mwrWeightQTable
OBJECT-TYPE
A table containing queue weight setting for each queue, the configuration corresponds to the egress QoS of radio port.
1.3.6.1.4.1.7262.4.5.9.1.1.9not-accessiblecurrent
mwrWeightQEntry
OBJECT-TYPE
A table entry containing queue weight setting for each queue.
1.3.6.1.4.1.7262.4.5.9.1.1.9.1not-accessiblecurrent
mwrWeightQIndex
OBJECT-TYPE
Specifies queue weight index for each radio queue.
1.3.6.1.4.1.7262.4.5.9.1.1.9.1.1QueueTypenot-accessiblecurrent
mwrWeightQ1
OBJECT-TYPE
Specifies queue weight value for queue 1.
1.3.6.1.4.1.7262.4.5.9.1.1.9.1.2Integer32read-writecurrent
mwrWeightQ2
OBJECT-TYPE
Specifies queue weight value for queue 2.
1.3.6.1.4.1.7262.4.5.9.1.1.9.1.3Integer32read-writecurrent
mwrWeightQ3
OBJECT-TYPE
Specifies queue weight value for queue 3.
1.3.6.1.4.1.7262.4.5.9.1.1.9.1.4Integer32read-writecurrent
mwrWeightQ4
OBJECT-TYPE
Specifies queue weight value for queue 4.
1.3.6.1.4.1.7262.4.5.9.1.1.9.1.5Integer32read-writecurrent
mwrWeightQ5
OBJECT-TYPE
Specifies queue weight value for queue 5.
1.3.6.1.4.1.7262.4.5.9.1.1.9.1.6Integer32read-writecurrent
mwrWeightQ6
OBJECT-TYPE
Specifies queue weight value for queue 6.
1.3.6.1.4.1.7262.4.5.9.1.1.9.1.7Integer32read-writecurrent
mwrWeightQ7
OBJECT-TYPE
Specifies queue weight value for queue 7.
1.3.6.1.4.1.7262.4.5.9.1.1.9.1.8Integer32read-writecurrent
mwrWeightQ8
OBJECT-TYPE
Specifies queue weight value for queue 8.
1.3.6.1.4.1.7262.4.5.9.1.1.9.1.9Integer32read-writecurrent
mwrWeightQRowStatus
OBJECT-TYPE
The queue weight table Row status. This object is used to apply all queue weight settings simultaneously.
1.3.6.1.4.1.7262.4.5.9.1.1.9.1.10RowStatusread-writecurrent
mwrQbsQTable
OBJECT-TYPE
A table containing queue buffer size, the configuration corresponds to the egress QoS of radio port.
1.3.6.1.4.1.7262.4.5.9.1.1.10not-accessiblecurrent
mwrQbsQEntry
OBJECT-TYPE
A table entry containing queue buffer size.
1.3.6.1.4.1.7262.4.5.9.1.1.10.1not-accessiblecurrent
mwrQbsQIndex
OBJECT-TYPE
Specifies QBS queue index for each radio queue.
1.3.6.1.4.1.7262.4.5.9.1.1.10.1.1QueueTypenot-accessiblecurrent
mwrQbsQ1
OBJECT-TYPE
Specifies queue buffer size (QBS) for queue 1.
1.3.6.1.4.1.7262.4.5.9.1.1.10.1.2Integer32read-writecurrent
mwrQbsQ2
OBJECT-TYPE
Specifies queue buffer size (QBS) for queue 2.
1.3.6.1.4.1.7262.4.5.9.1.1.10.1.3Integer32read-writecurrent
mwrQbsQ3
OBJECT-TYPE
Specifies queue buffer size (QBS) for queue 3.
1.3.6.1.4.1.7262.4.5.9.1.1.10.1.4Integer32read-writecurrent
mwrQbsQ4
OBJECT-TYPE
Specifies queue buffer size (QBS) for queue 4.
1.3.6.1.4.1.7262.4.5.9.1.1.10.1.5Integer32read-writecurrent
mwrQbsQ5
OBJECT-TYPE
Specifies queue buffer size (QBS) for queue 5.
1.3.6.1.4.1.7262.4.5.9.1.1.10.1.6Integer32read-writecurrent
mwrQbsQ6
OBJECT-TYPE
Specifies queue buffer size (QBS) for queue 6.
1.3.6.1.4.1.7262.4.5.9.1.1.10.1.7Integer32read-writecurrent
mwrQbsQ7
OBJECT-TYPE
Specifies queue buffer size (QBS) for queue 7.
1.3.6.1.4.1.7262.4.5.9.1.1.10.1.8Integer32read-writecurrent
mwrQbsQ8
OBJECT-TYPE
Specifies queue buffer size (QBS) for queue 8.
1.3.6.1.4.1.7262.4.5.9.1.1.10.1.9Integer32read-writecurrent
mwrQbsQRowStatus
OBJECT-TYPE
The queue buffer size (QBS) table Row status. This object is used to apply all queue QBS settings simultaneously.
1.3.6.1.4.1.7262.4.5.9.1.1.10.1.10RowStatusread-writecurrent
mwrPolicyQTable
OBJECT-TYPE
A table containing queue policy for each queue, the configuration corresponds to the egress QoS of radio port.
1.3.6.1.4.1.7262.4.5.9.1.1.11not-accessiblecurrent
mwrPolicyQEntry
OBJECT-TYPE
A table entry containing queue policy for each queue.
1.3.6.1.4.1.7262.4.5.9.1.1.11.1not-accessiblecurrent
mwrPolicyQIndex
OBJECT-TYPE
Specifies queue policy index for each radio queue.
1.3.6.1.4.1.7262.4.5.9.1.1.11.1.1QueueTypenot-accessiblecurrent
mwrPolicyQ1
OBJECT-TYPE
User queue policy value for queue 1.
1.3.6.1.4.1.7262.4.5.9.1.1.11.1.2INTEGER {wfq(1), priority(2), pf(3)}read-writecurrent
mwrPolicyQ2
OBJECT-TYPE
User queue policy value for queue 2.
1.3.6.1.4.1.7262.4.5.9.1.1.11.1.3INTEGER {wfq(1), priority(2), pf(3)}read-writecurrent
mwrPolicyQ3
OBJECT-TYPE
User queue policy value for queue 3.
1.3.6.1.4.1.7262.4.5.9.1.1.11.1.4INTEGER {wfq(1), priority(2), pf(3)}read-writecurrent
mwrPolicyQ4
OBJECT-TYPE
User queue policy value for queue 4.
1.3.6.1.4.1.7262.4.5.9.1.1.11.1.5INTEGER {wfq(1), priority(2), pf(3)}read-writecurrent
mwrPolicyQ5
OBJECT-TYPE
User queue policy value for queue 5.
1.3.6.1.4.1.7262.4.5.9.1.1.11.1.6INTEGER {wfq(1), priority(2), pf(3)}read-writecurrent
mwrPolicyQ6
OBJECT-TYPE
User queue policy value for queue 6.
1.3.6.1.4.1.7262.4.5.9.1.1.11.1.7INTEGER {wfq(1), priority(2), pf(3)}read-writecurrent
mwrPolicyQ7
OBJECT-TYPE
User queue policy value for queue 7.
1.3.6.1.4.1.7262.4.5.9.1.1.11.1.8INTEGER {wfq(1), priority(2), pf(3)}read-writecurrent
mwrPolicyQ8
OBJECT-TYPE
User queue policy value for queue 8.
1.3.6.1.4.1.7262.4.5.9.1.1.11.1.9INTEGER {wfq(1), priority(2), pf(3)}read-writecurrent
mwrPolicyQRowStatus
OBJECT-TYPE
The queue policy table Row status. This object is used to apply all queue policy settings simultaneously.
1.3.6.1.4.1.7262.4.5.9.1.1.11.1.10RowStatusread-writecurrent
mwrUserClassTable
OBJECT-TYPE
A table containing QOS user class settings, the configuration corresponds to the egress QoS of radio port.
1.3.6.1.4.1.7262.4.5.9.1.1.12not-accessiblecurrent
mwrUserClassEntry
OBJECT-TYPE
A table entry containing QOS user class settings.
1.3.6.1.4.1.7262.4.5.9.1.1.12.1not-accessiblecurrent
mwrUserClassIndex
OBJECT-TYPE
Specifies user class queue index for each radio queue.
1.3.6.1.4.1.7262.4.5.9.1.1.12.1.1ClassTypenot-accessiblecurrent
mwrUserClassOffset
OBJECT-TYPE
Specifies user class offset value.
1.3.6.1.4.1.7262.4.5.9.1.1.12.1.2Integer32read-writecurrent
mwrUserClassValue
OBJECT-TYPE
Specifies user class value.
1.3.6.1.4.1.7262.4.5.9.1.1.12.1.3DisplayStringread-writecurrent
mwrUserClassMask
OBJECT-TYPE
Specifies user class mask.
1.3.6.1.4.1.7262.4.5.9.1.1.12.1.4DisplayStringread-writecurrent
mwrUserFlowTable
OBJECT-TYPE
A table containing QOS user flow settings, the configuration corresponds to the egress QoS of radio port.
1.3.6.1.4.1.7262.4.5.9.1.1.13not-accessiblecurrent
mwrUserFlowEntry
OBJECT-TYPE
A table entry containing QOS user flow settings.
1.3.6.1.4.1.7262.4.5.9.1.1.13.1not-accessiblecurrent
mwrUserFlowIndex
OBJECT-TYPE
Specifies user flow filter queue index for each queue.
1.3.6.1.4.1.7262.4.5.9.1.1.13.1.1FlowTypenot-accessiblecurrent
mwrUserFlowFilter
OBJECT-TYPE
Specifies user flow filter value for each queue.
1.3.6.1.4.1.7262.4.5.9.1.1.13.1.2DisplayStringread-writecurrent
mwrUserFlowMappingTable
OBJECT-TYPE
A table containing QOS user flow mapping settings in port isolation mode.
1.3.6.1.4.1.7262.4.5.9.1.1.14not-accessiblecurrent
mwrUserFlowMappingEntry
OBJECT-TYPE
A table entry containing QOS user flow mapping settings in port isolation mode.
1.3.6.1.4.1.7262.4.5.9.1.1.14.1not-accessiblecurrent
mwrUserFlowMappingIndex
OBJECT-TYPE
Specifies user flow mapping index for each flow in port isolation mode.
1.3.6.1.4.1.7262.4.5.9.1.1.14.1.1FlowTypenot-accessiblecurrent
mwrUserFlowMappingState
OBJECT-TYPE
Enables or disabled user flow mapping for a specific flow in port isolation mode.
1.3.6.1.4.1.7262.4.5.9.1.1.14.1.2EnableTyperead-writecurrent
mwrUserFlowMapping1Q
OBJECT-TYPE
Specifies the selected queue for gi01 in port isolation mode.
1.3.6.1.4.1.7262.4.5.9.1.1.14.1.3QueueTyperead-writecurrent
mwrUserFlowMapping2Q
OBJECT-TYPE
Specifies the selected queue for gi02 in port isolation mode.
1.3.6.1.4.1.7262.4.5.9.1.1.14.1.4QueueTyperead-writecurrent
mwrUserFlowMapping3Q
OBJECT-TYPE
Specifies the selected queue for gi03 in port isolation mode.
1.3.6.1.4.1.7262.4.5.9.1.1.14.1.5QueueTyperead-writecurrent
mwrUserFlowMapping4Q
OBJECT-TYPE
Specifies the selected queue for gi04 in port isolation mode.
1.3.6.1.4.1.7262.4.5.9.1.1.14.1.6QueueTyperead-writecurrent
mwrUserFlowMappingRowStatus
OBJECT-TYPE
Row status for user flow mapping in port isolation mode.
1.3.6.1.4.1.7262.4.5.9.1.1.14.1.7RowStatusread-writecurrent
mwrUserFlowMappingBridgeModeTable
OBJECT-TYPE
A table containing QOS user flow mapping settings in bridge mode, the configuration corresponds to the egress QoS of radio port.
1.3.6.1.4.1.7262.4.5.9.1.1.15not-accessiblecurrent
mwrUserFlowMappingBridgeModeEntry
OBJECT-TYPE
A table entry containing QOS user flow mapping settings in bridge mode.
1.3.6.1.4.1.7262.4.5.9.1.1.15.1not-accessiblecurrent
mwrUserFlowMappingBridgeModeIndex
OBJECT-TYPE
Specifies user flow mapping index for each flow in bridge mode.
1.3.6.1.4.1.7262.4.5.9.1.1.15.1.1FlowTypenot-accessiblecurrent
mwrUserFlowMappingBridgeModeState
OBJECT-TYPE
Enables or disabled user flow mapping for a specific flow in bridge mode.
1.3.6.1.4.1.7262.4.5.9.1.1.15.1.2EnableTyperead-writecurrent
mwrUserFlowMappingBridgeModeQ
OBJECT-TYPE
Specifies the selected user flow mapping queue in bridge mode.
1.3.6.1.4.1.7262.4.5.9.1.1.15.1.3QueueTyperead-writecurrent
mwrUserFlowMappingBridgeModeRowStatus
OBJECT-TYPE
Row status for user flow mapping in bridge mode.
1.3.6.1.4.1.7262.4.5.9.1.1.15.1.4RowStatusread-writecurrent
mwrEthThresholdAlarm
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.9.1.2
mwrPortThresholdAlarmTable
OBJECT-TYPE
A table containing threshold alarms parameters.
1.3.6.1.4.1.7262.4.5.9.1.2.1not-accessiblecurrent
mwrPortThresholdAlarmEntry
OBJECT-TYPE
A table entry containing threshold alarms parameters.
1.3.6.1.4.1.7262.4.5.9.1.2.1.1not-accessiblecurrent
mwrPortThresholdAlarmIndex
OBJECT-TYPE
Index to Threshold alarm table. Instance 1 indicates Radio port.
1.3.6.1.4.1.7262.4.5.9.1.2.1.1.1Integer32not-accessiblecurrent
mwrDroppedPktsThresholdParams
OBJECT-TYPE
This object configures the dropped packets threshold settings. The threshold, in percent and the number of seconds that it must exceed this threshold. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of packets that are dropped, the second is the time in seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command.
1.3.6.1.4.1.7262.4.5.9.1.2.1.1.2DisplayString (SIZE(0..24))read-writecurrent
mwrOutBWUtilizationThresholdParams
OBJECT-TYPE
This object configures the BW utilization threshold settings. The threshold, in percent and the number of seconds that it must exceed this threshold. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of BW threshold, the second is the time in seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command
1.3.6.1.4.1.7262.4.5.9.1.2.1.1.3DisplayStringread-writecurrent
mwrThroughputThresholdParams
OBJECT-TYPE
This object configures the radio throughput threshold settings. The threshold, in percent and the number of seconds that it must exceed this threshold. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of the throughput, the second is the time in seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command
1.3.6.1.4.1.7262.4.5.9.1.2.1.1.4DisplayStringread-writecurrent
mwrRadioQThresholdAlarmTable
OBJECT-TYPE
A table of radio port queue based Threshold Alarm settings, the configuration corresponds to the egress QoS of radio port.
1.3.6.1.4.1.7262.4.5.9.1.2.2not-accessiblecurrent
mwrRadioQThresholdAlarmEntry
OBJECT-TYPE
A table entry of queue based Threshold Alarm settings.
1.3.6.1.4.1.7262.4.5.9.1.2.2.1not-accessiblecurrent
mwrRadioQThresholdAlarmIndex
OBJECT-TYPE
A unique identifier for one of the 8 queues
1.3.6.1.4.1.7262.4.5.9.1.2.2.1.1QueueTyperead-onlycurrent
mwrRadioQDepthThresholdParams
OBJECT-TYPE
The threshold, in percent, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of queue depth, the second is the time in seconds that the threshold must be exceeded.
1.3.6.1.4.1.7262.4.5.9.1.2.2.1.2DisplayStringread-writecurrent
mwrRadioQDroppedPktsThresholdParams
OBJECT-TYPE
The threshold, in packets, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the number of packets that are dropped, the second is the time in seconds that the threshold must be exceeded.
1.3.6.1.4.1.7262.4.5.9.1.2.2.1.3DisplayStringread-writecurrent
mwrEthernetStatus
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.9.2
mwrEthernetPerformance
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.9.3
mwrEnetPerfPortStatsTable
OBJECT-TYPE
A table containing Ethernet port statistics.
1.3.6.1.4.1.7262.4.5.9.3.1not-accessiblecurrent
mwrEnetPerfPortStatsEntry
OBJECT-TYPE
A table entry containing Ethernet port statistics.
1.3.6.1.4.1.7262.4.5.9.3.1.1not-accessiblecurrent
mwrEnetPortStatsIndex
OBJECT-TYPE
A table index to Ethernet ports.
1.3.6.1.4.1.7262.4.5.9.3.1.1.1INTEGER {gi01(1), gi02(2), gi03(3), gi04(4), radio(5)}read-onlycurrent
mwrPortStatsInOctet
OBJECT-TYPE
A 64-bit counter representing the incoming octets.
1.3.6.1.4.1.7262.4.5.9.3.1.1.2Counter64read-onlycurrent
mwrPortStatsInGoodPkts
OBJECT-TYPE
A 64-bit counter representing the incoming good packets.
1.3.6.1.4.1.7262.4.5.9.3.1.1.3Counter64read-onlycurrent
mwrPortStatsInErrPkts
OBJECT-TYPE
A 64-bit counter representing the incoming error packets.
1.3.6.1.4.1.7262.4.5.9.3.1.1.4Counter64read-onlycurrent
mwrPortStatsInDiscardPkts
OBJECT-TYPE
A 64-bit counter representing the incoming discarded packets.
1.3.6.1.4.1.7262.4.5.9.3.1.1.5Counter64read-onlycurrent
mwrPortStatsOutOctets
OBJECT-TYPE
A 64-bit counter representing the outgoing octets.
1.3.6.1.4.1.7262.4.5.9.3.1.1.6Counter64read-onlycurrent
mwrPortStatsOutGoodPkts
OBJECT-TYPE
A 64-bit counter representing the outgoing good packets.
1.3.6.1.4.1.7262.4.5.9.3.1.1.7Counter64read-onlycurrent
mwrPortStatsOutErrPkts
OBJECT-TYPE
A 64-bit counter representing the outgoing error packets.
1.3.6.1.4.1.7262.4.5.9.3.1.1.8Counter64read-onlycurrent
mwrPortStatsOutDiscardPkts
OBJECT-TYPE
A 64-bit counter representing the outgoing discarded packets.
1.3.6.1.4.1.7262.4.5.9.3.1.1.9Counter64read-onlycurrent
mwrPortStatsOutBwUtilization
OBJECT-TYPE
This object represents the ratio of egress data rate and the egress link capacity of the port. The value is represented in %.
1.3.6.1.4.1.7262.4.5.9.3.1.1.10Integer32read-onlycurrent
mwrPortStatsInBwUtilization
OBJECT-TYPE
This object represents the ratio of ingress data rate and the ingress link capacity of the port. The value is represented in %.
1.3.6.1.4.1.7262.4.5.9.3.1.1.11Integer32read-onlycurrent
mwrPortStatsInDataRate
OBJECT-TYPE
The Ethernet data rate coming into the port. The data rate is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs
1.3.6.1.4.1.7262.4.5.9.3.1.1.12Integer32read-onlycurrent
mwrPortStatsThroughput
OBJECT-TYPE
The Ethernet data rate going out of the port. The data rate is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs.
1.3.6.1.4.1.7262.4.5.9.3.1.1.13Integer32read-onlycurrent
mwrEnetPerfPortStats32BitTable
OBJECT-TYPE
A table containing 32-bit Ethernet statistics. This table is provided to satisfy snmp v1 users where they can't access 64-bit counters.
1.3.6.1.4.1.7262.4.5.9.3.2not-accessiblecurrent
mwrEnetPerfPortStats32BitEntry
OBJECT-TYPE
A table entry containing 32-bit Ethernet statistics. This table is provided to satisfy snmp v1 users where they can't access 64-bit counters.
1.3.6.1.4.1.7262.4.5.9.3.2.1not-accessiblecurrent
mwrPortStats32BitIndex
OBJECT-TYPE
A table index to ports carrying Ethernet packets.
1.3.6.1.4.1.7262.4.5.9.3.2.1.1INTEGER {gi01(1), gi02(2), gi03(3), gi04(4), radio(5)}not-accessiblecurrent
mwrPortStatsInOctet32Bit
OBJECT-TYPE
A 32-bit counter representing the incoming octets.
1.3.6.1.4.1.7262.4.5.9.3.2.1.2Counter32read-onlycurrent
mwrPortStatsInGoodPkts32Bit
OBJECT-TYPE
A 32-bit counter representing the incoming good packets.
1.3.6.1.4.1.7262.4.5.9.3.2.1.3Counter32read-onlycurrent
mwrPortStatsInErrPkts32Bit
OBJECT-TYPE
A 32-bit counter representing the incoming error packets.
1.3.6.1.4.1.7262.4.5.9.3.2.1.4Counter32read-onlycurrent
mwrPortStatsInDiscardPkts32Bit
OBJECT-TYPE
A 32-bit counter representing the incoming discarded packets.
1.3.6.1.4.1.7262.4.5.9.3.2.1.5Counter32read-onlycurrent
mwrPortStatsOutOctets32Bit
OBJECT-TYPE
A 32-bit counter representing the outgoing octets.
1.3.6.1.4.1.7262.4.5.9.3.2.1.6Counter32read-onlycurrent
mwrPortStatsOutGoodPkts32Bit
OBJECT-TYPE
A 32-bit counter representing the outgoing good packets.
1.3.6.1.4.1.7262.4.5.9.3.2.1.7Counter32read-onlycurrent
mwrPortStatsOutErrPkts32Bit
OBJECT-TYPE
A 32-bit counter representing the outgoing error packets.
1.3.6.1.4.1.7262.4.5.9.3.2.1.8Counter32read-onlycurrent
mwrPortStatsOutDiscardPkts32Bit
OBJECT-TYPE
A 32-bit counter representing the outgoing discarded packets.
1.3.6.1.4.1.7262.4.5.9.3.2.1.9Counter32read-onlycurrent
mwrEnetPerfRadioQStatsTable
OBJECT-TYPE
A table containing radio queue statistics.
1.3.6.1.4.1.7262.4.5.9.3.3not-accessiblecurrent
mwrEnetPerfRadioQStatsEntry
OBJECT-TYPE
A table entry containing radio queue statistics.
1.3.6.1.4.1.7262.4.5.9.3.3.1not-accessiblecurrent
mwrRadioQStatsIndex
OBJECT-TYPE
A unique value for each of the 8 queues.
1.3.6.1.4.1.7262.4.5.9.3.3.1.1QueueTypenot-accessiblecurrent
mwrRadioQStatsInGoodPkts
OBJECT-TYPE
The current count of packets in queues.
1.3.6.1.4.1.7262.4.5.9.3.3.1.2Counter64read-onlycurrent
mwrRadioQStatsInDiscardPkts
OBJECT-TYPE
The current count of packets received in queues that were discarded due to queue overflow.
1.3.6.1.4.1.7262.4.5.9.3.3.1.3Counter64read-onlycurrent
mwrRadioQStatsOutBwUtilization
OBJECT-TYPE
The ratio of egress data rate and user configured radio queue CIR.
1.3.6.1.4.1.7262.4.5.9.3.3.1.4Integer32read-onlycurrent
mwrRadioQStatsInDataRate
OBJECT-TYPE
The ingress data rate of the radio queue.
1.3.6.1.4.1.7262.4.5.9.3.3.1.5Integer32read-onlycurrent
mwrRadioQStatsThroughput
OBJECT-TYPE
The throughput of the radio queue.
1.3.6.1.4.1.7262.4.5.9.3.3.1.6Integer32read-onlycurrent
mwrEnetPerfRadioQStats32BitTable
OBJECT-TYPE
A table containing 32-bit counters for radio queue statistics.
1.3.6.1.4.1.7262.4.5.9.3.4not-accessiblecurrent
mwrEnetPerfRadioQStats32BitEntry
OBJECT-TYPE
A table entry containing 32-bit counters for radio queue statistics.
1.3.6.1.4.1.7262.4.5.9.3.4.1not-accessiblecurrent
mwrRadioQStats32BitIndex
OBJECT-TYPE
A unique value for each of the 8 queues.
1.3.6.1.4.1.7262.4.5.9.3.4.1.1QueueTypenot-accessiblecurrent
mwrRadioQStatsInGoodPkts32Bit
OBJECT-TYPE
A 32-bit counter representing the current count of packets in queues.
1.3.6.1.4.1.7262.4.5.9.3.4.1.2Counter32read-onlycurrent
mwrRadioQStatsDiscardPkts32Bit
OBJECT-TYPE
A 32-bit counter representing the current count of packets received in queues that were discarded due to queue overflow .
1.3.6.1.4.1.7262.4.5.9.3.4.1.3Counter32read-onlycurrent
mwrEthernetNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.9.4
mwrAcm
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.10
mwrAcmConfigurations
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.10.1
mwrAcmManualMode
OBJECT-TYPE
Enables or disables the Adaptive Coding Modulation (ACM) Manual Mode.
1.3.6.1.4.1.7262.4.5.10.1.1EnableTyperead-writecurrent
mwrAcmState
OBJECT-TYPE
Enables or disables the Adaptive Code Modulation (ACM).
1.3.6.1.4.1.7262.4.5.10.1.2EnableTyperead-writecurrent
mwrAcmWaitToRestore
OBJECT-TYPE
This object configures the ACM wait to restore duration time in seconds.
1.3.6.1.4.1.7262.4.5.10.1.3Integer32read-writecurrent
mwrAcmModeTable
OBJECT-TYPE
A table containing available Adaptive Code Modulation (ACM) tx profiles.
1.3.6.1.4.1.7262.4.5.10.1.4not-accessiblecurrent
mwrAcmModeEntry
OBJECT-TYPE
A table entry containing available Adaptive Code Modulation (ACM) tx profiles.
1.3.6.1.4.1.7262.4.5.10.1.4.1not-accessiblecurrent
mwrAcmModeIndex
OBJECT-TYPE
A unique value for each Adaptive Code Modulation (ACM) tx profile.
1.3.6.1.4.1.7262.4.5.10.1.4.1.1Integer32not-accessiblecurrent
mwrAcmTxProfileName
OBJECT-TYPE
The Adaptive Code Modulation (ACM) tx profile name.
1.3.6.1.4.1.7262.4.5.10.1.4.1.2DisplayStringread-onlycurrent
mwrAcmTxProfileRange
OBJECT-TYPE
Specifies the range for the Adaptive Code Modulation (ACM) TX Profile.
1.3.6.1.4.1.7262.4.5.10.1.4.1.3INTEGER {notAllowed(1), allowed(2), max(3), min(4)}read-writecurrent
mwrAcmStatus
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.10.2
mwrAcmStatusTable
OBJECT-TYPE
A table containing Adaptive Code Modulation (ACM) status.
1.3.6.1.4.1.7262.4.5.10.2.1not-accessiblecurrent
mwrAcmStatusEntry
OBJECT-TYPE
A table entry containing Adaptive Code Modulation (ACM) status.
1.3.6.1.4.1.7262.4.5.10.2.1.1not-accessiblecurrent
mwrAcmStatusIndex
OBJECT-TYPE
A unique value for each interface.
1.3.6.1.4.1.7262.4.5.10.2.1.1.1RadioInstanceTypenot-accessiblecurrent
mwrAcmActualTxProfile
OBJECT-TYPE
A read-only string specifying the currently running ACM TX profile.
1.3.6.1.4.1.7262.4.5.10.2.1.1.2DisplayString (SIZE(0..24))read-onlycurrent
mwrAcmDiagnostics
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.10.3
mwrAcmDiagTable
OBJECT-TYPE
A table containing ACM diagnostic settings.
1.3.6.1.4.1.7262.4.5.10.3.1not-accessiblecurrent
mwrAcmDiagEntry
OBJECT-TYPE
A table entry containing ACM diagnostic settings.
1.3.6.1.4.1.7262.4.5.10.3.1.1not-accessiblecurrent
mwrAcmDiagIndex
OBJECT-TYPE
A unique value for each radio channel if applicable.
1.3.6.1.4.1.7262.4.5.10.3.1.1.1RadioInstanceTypenot-accessiblecurrent
mwrAcmDiagnose
OBJECT-TYPE
This service effecting object accepts either 'up' or 'down' to diagnose whether the modulation speed can be increased or decreased. Poll the mwrAcmDiagnosticResult object to determine the results.
1.3.6.1.4.1.7262.4.5.10.3.1.1.2INTEGER {up(1), down(2)}read-writecurrent
mwrAcmDiagnosticResult
OBJECT-TYPE
The result from ACM Diagnostic is read from this object.
1.3.6.1.4.1.7262.4.5.10.3.1.1.3DisplayStringread-onlycurrent
mwrAcmNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.10.4
mwrAtpc
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.11
mwrAtpcConfigurations
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.11.1
mwrAtpcConfigurationsTable
OBJECT-TYPE
Table containing ATPC configurations.
1.3.6.1.4.1.7262.4.5.11.1.1not-accessiblecurrent
mwrAtpcConfigurationsEntry
OBJECT-TYPE
Table entry containing ATPC configurations.
1.3.6.1.4.1.7262.4.5.11.1.1.1not-accessiblecurrent
mwrAtpcConfigIndex
OBJECT-TYPE
A unique value for each of the radio channel instance.
1.3.6.1.4.1.7262.4.5.11.1.1.1.1RadioInstanceTypenot-accessiblecurrent
mwrAtpcState
OBJECT-TYPE
Indicates whether the Adaptive Transmit Power Control (ATPC) feature is enabled.
1.3.6.1.4.1.7262.4.5.11.1.1.1.2EnableTyperead-writecurrent
mwrAtpcCoordinatedPower
OBJECT-TYPE
This object is the value at which the system will transmit if the ATPC and the coordinated power are enabled. This is only if the system is transmitting the maximum power for 5 minutes. The value is multiplied by 10. e.g. A display of 133 is actually 13.3 dB.
1.3.6.1.4.1.7262.4.5.11.1.1.1.3Integer32read-writecurrent
mwrAtpcCoordinatedPowerEnable
OBJECT-TYPE
Indicates whether Adaptive Transmit Power Control (ATPC) coordinated power option is enabled.
1.3.6.1.4.1.7262.4.5.11.1.1.1.4EnableTyperead-writecurrent
mwrAtpcMinTxPower
OBJECT-TYPE
Sets the minimum ATPC transmit power in dB x 10.
1.3.6.1.4.1.7262.4.5.11.1.1.1.5Integer32read-writecurrent
mwrAtpcMaxTxPower
OBJECT-TYPE
Sets the maximum ATPC transmit power in dB x 10. When ATPC is enabled, transmit power range will be between ATPC min. and ATPC max. power.
1.3.6.1.4.1.7262.4.5.11.1.1.1.6Integer32read-writecurrent
mwrAtpcRslTarget
OBJECT-TYPE
This object configures Received Signal Level that should be maintained by the link by adjusting the transmit power when ATPC is enabled.
1.3.6.1.4.1.7262.4.5.11.1.1.1.7Integer32read-writecurrent
mwrAtpcRslTargetUseDefault
OBJECT-TYPE
When this object is enabled the default RSL target will be used instead of the configured mwrAtpcRslTarget. The mwrAtpcDefaultRslTarget displays the default value.
1.3.6.1.4.1.7262.4.5.11.1.1.1.8EnableTyperead-writecurrent
mwrAtpcStatus
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.11.2
mwrAtpcStatusTable
OBJECT-TYPE
A table containing ATPC status.
1.3.6.1.4.1.7262.4.5.11.2.1not-accessiblecurrent
mwrAtpcStatusEntry
OBJECT-TYPE
A table entry containing ATPC status.
1.3.6.1.4.1.7262.4.5.11.2.1.1not-accessiblecurrent
mwrAtpcStatusIndex
OBJECT-TYPE
A unique value for each of the radio instance.
1.3.6.1.4.1.7262.4.5.11.2.1.1.1RadioInstanceTypenot-accessiblecurrent
mwrAtpcRunningStatus
OBJECT-TYPE
Indicates the actual condition of ATPC: - disabled: Configuration is set to off. - disabledAuto: Feature was automatically disabled and is transmitting at coordinated power. - running: Feature is running normally. - runningToggling: Feature is toggling between maximum and minimum power to recover from a loss of mod sync. - suspended: Feature was suspended. - suspendedLostComm: Feature is suspended because communication is lost with peer ATPC. - suspendedRadioDown: Feature is suspended because the radio is down. - suspendedRadioMuted: Feature is suspended because the radio is muted. - suspendedRadioLoopback: Feature is suspended because the radio is in loopback mode.
1.3.6.1.4.1.7262.4.5.11.2.1.1.2INTEGER {disabled(1), disabledAuto(2), running(3), runningToggling(4), suspended(5), suspendedLostComm(6), suspendedRadioDown(7), suspendedRadioMuted(8), suspendedRadioLoopback(9)}read-onlycurrent
mwrAtpcDefaultRslTarget
OBJECT-TYPE
This object is the default value of the Received Signal Level target when ATPC is enabled.
1.3.6.1.4.1.7262.4.5.11.2.1.1.3Integer32read-onlycurrent
mwrAtpcActualMinTxPower
OBJECT-TYPE
This object indicates the running configuration for ATPC min tx power.
1.3.6.1.4.1.7262.4.5.11.2.1.1.4Integer32read-onlycurrent
mwrAtpcActualMaxTxPower
OBJECT-TYPE
This object indicates the running configuration for ATPC max tx power.
1.3.6.1.4.1.7262.4.5.11.2.1.1.5Integer32read-onlycurrent
mwrAtpcActualCoordinatedPower
OBJECT-TYPE
This value is the running configuration of the coordinated power. The value is multiplied by 10. e.g. A display of 133 is actually 13.3 dB.
1.3.6.1.4.1.7262.4.5.11.2.1.1.6Integer32read-onlycurrent
mwrAtpcPeerRslTarget
OBJECT-TYPE
This object is the peer Received Signal Level target when ATPC is enabled.
1.3.6.1.4.1.7262.4.5.11.2.1.1.7Integer32read-onlycurrent
mwrAtpcMinRslTarget
OBJECT-TYPE
Represents the minimum RSL target value.
1.3.6.1.4.1.7262.4.5.11.2.1.1.8Integer32read-onlycurrent
mwrAtpcMaxRslTarget
OBJECT-TYPE
Represents the maximum RSL target value.
1.3.6.1.4.1.7262.4.5.11.2.1.1.9Integer32read-onlycurrent
mwrAtpcPeerRsl
OBJECT-TYPE
This object represents the peer actual RSL value. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dB. For example -352 is actually -35.2dB
1.3.6.1.4.1.7262.4.5.11.2.1.1.10Integer32read-onlycurrent
mwrAtpcNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.11.3
mwrRadio
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.12
mwrCompression
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.13
mwrCompressionConfigurations
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.13.1
mwrBacRecordAvgPeriod
OBJECT-TYPE
Configures the average period used for computing the running average BAC gain and uncompressed ratio. Default average period is set to 10 seconds.
1.3.6.1.4.1.7262.4.5.13.1.1Integer32read-writecurrent
mwrBacTable
OBJECT-TYPE
Table containing Bandwidth Acceleration entries.
1.3.6.1.4.1.7262.4.5.13.1.2not-accessiblecurrent
mwrBacEntry
OBJECT-TYPE
Contains Bandwidth Acceleration entries.
1.3.6.1.4.1.7262.4.5.13.1.2.1not-accessiblecurrent
mwrBacQIndex
OBJECT-TYPE
A unique value for each of the 8 radio egress Queues.
1.3.6.1.4.1.7262.4.5.13.1.2.1.1QueueTypenot-accessiblecurrent
mwrBacQEnable
OBJECT-TYPE
Configure queue compression state to disable/enable.
1.3.6.1.4.1.7262.4.5.13.1.2.1.2EnableTyperead-writecurrent
mwrBacQBlockSize
OBJECT-TYPE
Configure queue compression block size (256...8000). Block size has to be in increments of 64 bytes. Otherwise it will be rounded off to nearest 64 bytes. Valid block sizes are <256 512 1024 4032 8000>
1.3.6.1.4.1.7262.4.5.13.1.2.1.3Integer32read-writecurrent
mwrBacRecordLogging
OBJECT-TYPE
Enables/disables logging of BAC related statistics like Maximum BAC gain and Maximum uncompressed ratio on a per queue basis to syslog and flashlog.
1.3.6.1.4.1.7262.4.5.13.1.2.1.4EnableTyperead-writecurrent
mwrHcQTable
OBJECT-TYPE
A table containing Header Compression settings for each queue, the configuration corresponds to the egress QoS of radio port.
1.3.6.1.4.1.7262.4.5.13.1.3not-accessiblecurrent
mwrHcQEntry
OBJECT-TYPE
A table entry containing Header Compression settings for each queue.
1.3.6.1.4.1.7262.4.5.13.1.3.1not-accessiblecurrent
mwrHcQIndex
OBJECT-TYPE
Specifies Header Compression queue index for each radio queue.
1.3.6.1.4.1.7262.4.5.13.1.3.1.1QueueTypenot-accessiblecurrent
mwrHcQ1
OBJECT-TYPE
Enables or disables the Header Compression on queue 1.
1.3.6.1.4.1.7262.4.5.13.1.3.1.2EnableTyperead-writecurrent
mwrHcQ2
OBJECT-TYPE
Enables or disables the Header Compression on queue 2.
1.3.6.1.4.1.7262.4.5.13.1.3.1.3EnableTyperead-writecurrent
mwrHcQ3
OBJECT-TYPE
Enables or disables the Header Compression on queue 3.
1.3.6.1.4.1.7262.4.5.13.1.3.1.4EnableTyperead-writecurrent
mwrHcQ4
OBJECT-TYPE
Enables or disables the Header Compression on queue 4.
1.3.6.1.4.1.7262.4.5.13.1.3.1.5EnableTyperead-writecurrent
mwrHcQ5
OBJECT-TYPE
Enables or disables the Header Compression on queue 5.
1.3.6.1.4.1.7262.4.5.13.1.3.1.6EnableTyperead-writecurrent
mwrHcQ6
OBJECT-TYPE
Enables or disables the Header Compression on queue 6.
1.3.6.1.4.1.7262.4.5.13.1.3.1.7EnableTyperead-writecurrent
mwrHcQ7
OBJECT-TYPE
Enables or disables the Header Compression on queue 7.
1.3.6.1.4.1.7262.4.5.13.1.3.1.8EnableTyperead-writecurrent
mwrHcQ8
OBJECT-TYPE
Enables or disables the Header Compression on queue 8.
1.3.6.1.4.1.7262.4.5.13.1.3.1.9EnableTyperead-writecurrent
mwrHcQRowStatus
OBJECT-TYPE
The Header Compression table Row Status. This object is used to apply Header Compression settings for all queues simultaneously.
1.3.6.1.4.1.7262.4.5.13.1.3.1.10RowStatusread-writecurrent
mwrCompressionStatus
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.13.2
mwrBacStatusTable
OBJECT-TYPE
Table containing Bandwidth Acceleration status entries.
1.3.6.1.4.1.7262.4.5.13.2.1not-accessiblecurrent
mwrBacStatusEntry
OBJECT-TYPE
Contains Bandwidth Acceleration status entries.
1.3.6.1.4.1.7262.4.5.13.2.1.1not-accessiblecurrent
mwrBacStatusQIndex
OBJECT-TYPE
A unique value for each of the 8 Queues.
1.3.6.1.4.1.7262.4.5.13.2.1.1.1QueueTypenot-accessiblecurrent
mwrBacUncompressedRatio
OBJECT-TYPE
Running average Uncompressed ratio is calculated by collecting n samples of bytes uncompressed and bytes in to queue over specified average period in percentage.
1.3.6.1.4.1.7262.4.5.13.2.1.1.2DisplayStringread-onlycurrent
mwrBacGain
OBJECT-TYPE
The Running Average BAC gain is the sum of all bytes getting into the compressor divided by the sum of all compressed and uncompressed bytes calculated over an average period.
1.3.6.1.4.1.7262.4.5.13.2.1.1.3DisplayStringread-onlycurrent
mwrCompressionNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.13.3
mwrEvents
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.14
mwrEventsConfigurations
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.14.1
mwrEventConfigTable
OBJECT-TYPE
A table of alarm configuration
1.3.6.1.4.1.7262.4.5.14.1.1not-accessiblecurrent
mwrEventConfigEntry
OBJECT-TYPE
An entry of alarm configuration
1.3.6.1.4.1.7262.4.5.14.1.1.1not-accessiblecurrent
mwrEventConfigIndex
OBJECT-TYPE
A unique value for each alarm.
1.3.6.1.4.1.7262.4.5.14.1.1.1.1Unsigned32not-accessiblecurrent
mwrEventInstanceIndex
OBJECT-TYPE
A unique value for each instance of an alarm.
1.3.6.1.4.1.7262.4.5.14.1.1.1.2Unsigned32read-onlycurrent
mwrEventConfigSeverity
OBJECT-TYPE
The severity of the alarm as minor, major or critical.
1.3.6.1.4.1.7262.4.5.14.1.1.1.3INTEGER {clear(0), warning(1), minor(2), major(3), critical(4)}read-writecurrent
mwrEventName
OBJECT-TYPE
Represents the event name.
1.3.6.1.4.1.7262.4.5.14.1.1.1.4DisplayStringread-onlycurrent
mwrAlarmConfigState
OBJECT-TYPE
The state of the alarm which can be either enabled or disabled.
1.3.6.1.4.1.7262.4.5.14.1.1.1.5EnableTyperead-writecurrent
mwrTrapConfigState
OBJECT-TYPE
The state of the trap which can be either enabled or disabled.
1.3.6.1.4.1.7262.4.5.14.1.1.1.6EnableTyperead-writecurrent
mwrLogEventState
OBJECT-TYPE
This object is used to enable or disable logging the events.
1.3.6.1.4.1.7262.4.5.14.1.1.1.7EnableTyperead-writecurrent
mwrLogs
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.15
mwrLogsConfigurations
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.15.1
mwrEventLogEnable
OBJECT-TYPE
Indicates whether event log is enabled.
1.3.6.1.4.1.7262.4.5.15.1.1EnableTyperead-writecurrent
mwrPerfmLogEnable
OBJECT-TYPE
Indicates whether performance log is enabled.
1.3.6.1.4.1.7262.4.5.15.1.2EnableTyperead-writecurrent
mwrPerfmLogInterval
OBJECT-TYPE
Performance statistics are logged periodically by this interval. The interval can be up to 00:15:00 (15 minutes) and as short as 00:00:1 (1 seconds).
1.3.6.1.4.1.7262.4.5.15.1.3DisplayString (SIZE(0..10))read-writecurrent
mwrSysLogServerTable
OBJECT-TYPE
The syslog server table.
1.3.6.1.4.1.7262.4.5.15.1.4not-accessiblecurrent
mwrSysLogServerEntry
OBJECT-TYPE
The syslog server table entry.
1.3.6.1.4.1.7262.4.5.15.1.4.1not-accessiblecurrent
mwrSysLogServerIndex
OBJECT-TYPE
The syslog server table index.
1.3.6.1.4.1.7262.4.5.15.1.4.1.1Integer32 (1..5)not-accessiblecurrent
mwrSysLogEnable
OBJECT-TYPE
Indicates whether sys log is enabled.
1.3.6.1.4.1.7262.4.5.15.1.4.1.2EnableTyperead-writecurrent
mwrSysLogHostDomain
OBJECT-TYPE
Indicates sys log host inet address type. Valid types are ipv4 or ipv6.
1.3.6.1.4.1.7262.4.5.15.1.4.1.3InetAddressTyperead-writecurrent
mwrSysLogHostAddress
OBJECT-TYPE
Indicates sys log host inet address octet string.
1.3.6.1.4.1.7262.4.5.15.1.4.1.4InetAddressread-writecurrent
mwrPM
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.16
mwrPMConfigurations
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.16.1
mwrPmRspiThresholdTable
OBJECT-TYPE
Performance Monitoring table for Radio Synchronous Physical Interface thresholds.
1.3.6.1.4.1.7262.4.5.16.1.1not-accessiblecurrent
mwrPmRspiThresholdEntry
OBJECT-TYPE
Contains entries for Radio Synchronous Physical Interface thresholds.
1.3.6.1.4.1.7262.4.5.16.1.1.1not-accessiblecurrent
mwrPmRspiThrIndex
OBJECT-TYPE
Index to PM RSPI Threshold table.
1.3.6.1.4.1.7262.4.5.16.1.1.1.1RadioInstanceTypenot-accessiblecurrent
mwrPmRLT1
OBJECT-TYPE
Receive Level Threshold 1, represents the value of the first received power level threshold.
1.3.6.1.4.1.7262.4.5.16.1.1.1.2Integer32read-writecurrent
mwrPmRLT2
OBJECT-TYPE
Receive Level Threshold 2, represents the value of the second received power level threshold.
1.3.6.1.4.1.7262.4.5.16.1.1.1.3Integer32read-writecurrent
mwrPmRLT3
OBJECT-TYPE
Receive Level Threshold 3, represents the value of the third received power level threshold.
1.3.6.1.4.1.7262.4.5.16.1.1.1.4Integer32read-writecurrent
mwrPmRLT4
OBJECT-TYPE
Receive Level Threshold 4, represents the value of the fourth received power level threshold.
1.3.6.1.4.1.7262.4.5.16.1.1.1.5Integer32read-writecurrent
mwrPmTLT1
OBJECT-TYPE
Transmit Level Threshold 1, represents the value of the first transmitted power level threshold.
1.3.6.1.4.1.7262.4.5.16.1.1.1.6Integer32read-writecurrent
mwrPmTLT2
OBJECT-TYPE
Transmit Level Threshold 2, represents the value of the second transmitted power level threshold.
1.3.6.1.4.1.7262.4.5.16.1.1.1.7Integer32read-writecurrent
mwrPmRspiThrRowStatus
OBJECT-TYPE
This object is used for applying all RSPI thresholds simultaneously. Set RowStatus to NotInService, make changes to all or some threshold values and then change RowStatus back to Active.
1.3.6.1.4.1.7262.4.5.16.1.1.1.8RowStatusread-writecurrent
mwrPmBwThresholdTable
OBJECT-TYPE
Performance monitoring out bandwidth utilization thresholds table.
1.3.6.1.4.1.7262.4.5.16.1.2not-accessiblecurrent
mwrPmBwThresholdEntry
OBJECT-TYPE
Contains entries for performance monitoring out bandwidth utilization thresholds.
1.3.6.1.4.1.7262.4.5.16.1.2.1not-accessiblecurrent
mwrPmBWThrIndex
OBJECT-TYPE
Index to PM out BW Threshold table. Index 1 represents the radio port.
1.3.6.1.4.1.7262.4.5.16.1.2.1.1Integer32not-accessiblecurrent
mwrPmBWT1
OBJECT-TYPE
The performance monitoring out BW utilization threshold 1.
1.3.6.1.4.1.7262.4.5.16.1.2.1.2Integer32read-writecurrent
mwrPmBWT2
OBJECT-TYPE
The performance monitoring out BW utilization threshold 2.
1.3.6.1.4.1.7262.4.5.16.1.2.1.3Integer32read-writecurrent
mwrPmBWT3
OBJECT-TYPE
The performance monitoring out BW utilization threshold 3.
1.3.6.1.4.1.7262.4.5.16.1.2.1.4Integer32read-writecurrent
mwrPmBWT4
OBJECT-TYPE
The performance monitoring out BW utilization threshold 4.
1.3.6.1.4.1.7262.4.5.16.1.2.1.5Integer32read-writecurrent
mwrPmBWT5
OBJECT-TYPE
The performance monitoring out BW utilization threshold 5.
1.3.6.1.4.1.7262.4.5.16.1.2.1.6Integer32read-writecurrent
mwrPmBWT6
OBJECT-TYPE
The performance monitoring out BW utilization threshold 6.
1.3.6.1.4.1.7262.4.5.16.1.2.1.7Integer32read-writecurrent
mwrPmBWT7
OBJECT-TYPE
The performance monitoring out BW utilization threshold 7.
1.3.6.1.4.1.7262.4.5.16.1.2.1.8Integer32read-writecurrent
mwrPmBWT8
OBJECT-TYPE
The performance monitoring out BW utilization threshold 8.
1.3.6.1.4.1.7262.4.5.16.1.2.1.9Integer32read-writecurrent
mwrPmBWT9
OBJECT-TYPE
The performance monitoring out BW utilization threshold 9.
1.3.6.1.4.1.7262.4.5.16.1.2.1.10Integer32read-writecurrent
mwrPmBWT10
OBJECT-TYPE
The performance monitoring out BW utilization threshold 10.
1.3.6.1.4.1.7262.4.5.16.1.2.1.11Integer32read-writecurrent
mwrPmBWTRowStatus
OBJECT-TYPE
This object is used for applying all PM bandwidth threshold settings simultaneously. Set RowStatus to NotInService, make changes to all or some threshold values and then change RowStatus back to Active.
1.3.6.1.4.1.7262.4.5.16.1.2.1.12RowStatusread-writecurrent
mwrPmTpThresholdTable
OBJECT-TYPE
Performance monitoring throughput thresholds table.
1.3.6.1.4.1.7262.4.5.16.1.3not-accessiblecurrent
mwrPmTpThresholdEntry
OBJECT-TYPE
Contains entries for performance monitoring throughput thresholds.
1.3.6.1.4.1.7262.4.5.16.1.3.1not-accessiblecurrent
mwrPmTPThrIndex
OBJECT-TYPE
Index to PM throughput Threshold table. Index 1 represents the radio port.
1.3.6.1.4.1.7262.4.5.16.1.3.1.1Integer32not-accessiblecurrent
mwrPmTPT1
OBJECT-TYPE
The performance monitoring throughput threshold 1.
1.3.6.1.4.1.7262.4.5.16.1.3.1.2Integer32read-writecurrent
mwrPmTPT2
OBJECT-TYPE
The performance monitoring throughput threshold 2.
1.3.6.1.4.1.7262.4.5.16.1.3.1.3Integer32read-writecurrent
mwrPmTPT3
OBJECT-TYPE
The performance monitoring throughput threshold 3.
1.3.6.1.4.1.7262.4.5.16.1.3.1.4Integer32read-writecurrent
mwrPmTPT4
OBJECT-TYPE
The performance monitoring throughput threshold 4.
1.3.6.1.4.1.7262.4.5.16.1.3.1.5Integer32read-writecurrent
mwrPmTPT5
OBJECT-TYPE
The performance monitoring throughput threshold 5.
1.3.6.1.4.1.7262.4.5.16.1.3.1.6Integer32read-writecurrent
mwrPmTPT6
OBJECT-TYPE
The performance monitoring throughput threshold 6.
1.3.6.1.4.1.7262.4.5.16.1.3.1.7Integer32read-writecurrent
mwrPmTPT7
OBJECT-TYPE
The performance monitoring throughput threshold 7.
1.3.6.1.4.1.7262.4.5.16.1.3.1.8Integer32read-writecurrent
mwrPmTPT8
OBJECT-TYPE
The performance monitoring throughput threshold 8.
1.3.6.1.4.1.7262.4.5.16.1.3.1.9Integer32read-writecurrent
mwrPmTPT9
OBJECT-TYPE
The performance monitoring throughput threshold 9.
1.3.6.1.4.1.7262.4.5.16.1.3.1.10Integer32read-writecurrent
mwrPmTPT10
OBJECT-TYPE
The performance monitoring throughput threshold 10.
1.3.6.1.4.1.7262.4.5.16.1.3.1.11Integer32read-writecurrent
mwrPmTPTRowStatus
OBJECT-TYPE
This object is used for applying all PM throughput threshold settings simultaneously. Set RowStatus to NotInService, make changes to all or some threshold values and then change RowStatus back to Active.
1.3.6.1.4.1.7262.4.5.16.1.3.1.12RowStatusread-writecurrent
mwrPmAdvThresholdTable
OBJECT-TYPE
The advanced performance monitoring thresholds table.
1.3.6.1.4.1.7262.4.5.16.1.4not-accessiblecurrent
mwrPmAdvThresholdEntry
OBJECT-TYPE
The advanced performance monitoring thresholds entries.
1.3.6.1.4.1.7262.4.5.16.1.4.1not-accessiblecurrent
mwrPmAdvThrIndex
OBJECT-TYPE
The advanced performance monitoring thresholds table index. Index 1 represents the radio port.
1.3.6.1.4.1.7262.4.5.16.1.4.1.1Integer32not-accessiblecurrent
mwrPmAdvTxHitsT1
OBJECT-TYPE
The advanced performance monitoring Tx hits threshold 1.
1.3.6.1.4.1.7262.4.5.16.1.4.1.2Integer32read-writecurrent
mwrPmAdvRxHitsT1
OBJECT-TYPE
The advanced performance monitoring Rx hits threshold 1.
1.3.6.1.4.1.7262.4.5.16.1.4.1.3Integer32read-writecurrent
mwrPmAdvRowStatus
OBJECT-TYPE
This object is used for applying all PM advanced threshold settings simultaneously. Set RowStatus to NotInService, make changes to all threshold values and then change back RowStatus to Active.
1.3.6.1.4.1.7262.4.5.16.1.4.1.4RowStatusread-writecurrent
mwrPMStatus
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.16.2
mwrPmRspiTable
OBJECT-TYPE
Performance Monitoring table for Radio Synchronous Physical Interface.
1.3.6.1.4.1.7262.4.5.16.2.1not-accessiblecurrent
mwrPmRspiEntry
OBJECT-TYPE
Contains information for Radio Synchronous Physical Interface. The table is indexed by the granularity period and by the interval number. 22 rows are always presents, 20 are the historical measurements for 16 intervals in the quarter granularity and 4 intervals in the 24 hours granularity period. 2 rows represent the current measures.
1.3.6.1.4.1.7262.4.5.16.2.1.1not-accessiblecurrent
mwrPmRspiStatusIndex
OBJECT-TYPE
A unique value for each of the radio instance.
1.3.6.1.4.1.7262.4.5.16.2.1.1.1RadioInstanceTypenot-accessiblecurrent
mwrPmRspiInterval
OBJECT-TYPE
The interval period of the row. Quarter means the 15 minutes interval and day means the 24 hours interval.
1.3.6.1.4.1.7262.4.5.16.2.1.1.2PMIntervalTypenot-accessiblecurrent
mwrPmRspiIntervalID
OBJECT-TYPE
The interval identifier of the row, from 1 (last quarter) to 16 (oldest quarter) for the 15-minute and from 1 (yesterday) to 4 (4 days ago) for the 24-hour. Value 0 can be used to retrieve current measurements, according to the requested granularity.
1.3.6.1.4.1.7262.4.5.16.2.1.1.3Integer32 (0..16)not-accessiblecurrent
mwrPmRspiMeasSuspect
OBJECT-TYPE
Any problem that invalidates the measurement.
1.3.6.1.4.1.7262.4.5.16.2.1.1.4TruthValueread-onlycurrent
mwrPmRspiMeasIntervalStatus
OBJECT-TYPE
An indication if the interval is a valid measurement. When the system comes up, all the previous intervals are invalid.
1.3.6.1.4.1.7262.4.5.16.2.1.1.5INTEGER {invalid(1), valid(2)}read-onlycurrent
mwrPmRspiMeasTimeLength
OBJECT-TYPE
The interval duration in seconds.
1.3.6.1.4.1.7262.4.5.16.2.1.1.6Integer32read-onlycurrent
mwrPmRspiMeasTLTMMin
OBJECT-TYPE
The transmitted power level tide mark low value.
1.3.6.1.4.1.7262.4.5.16.2.1.1.7Integer32read-onlycurrent
mwrPmRspiMeasTLTMMax
OBJECT-TYPE
The transmitted power level tide mark high value.
1.3.6.1.4.1.7262.4.5.16.2.1.1.8Integer32read-onlycurrent
mwrPmRspiMeasTLTS1
OBJECT-TYPE
The number of seconds above the first transmitted power level threshold.
1.3.6.1.4.1.7262.4.5.16.2.1.1.9Integer32read-onlycurrent
mwrPmRspiMeasTLTS2
OBJECT-TYPE
The number of seconds above the second transmitted power level threshold.
1.3.6.1.4.1.7262.4.5.16.2.1.1.10Integer32read-onlycurrent
mwrPmRspiMeasRLTMMin
OBJECT-TYPE
The received power level tide mark low value.
1.3.6.1.4.1.7262.4.5.16.2.1.1.11Integer32read-onlycurrent
mwrPmRspiMeasRLTMMax
OBJECT-TYPE
The received power level tide mark high value.
1.3.6.1.4.1.7262.4.5.16.2.1.1.12Integer32read-onlycurrent
mwrPmRspiMeasRLTS1
OBJECT-TYPE
The number of seconds below the first received power level threshold.
1.3.6.1.4.1.7262.4.5.16.2.1.1.13Integer32read-onlycurrent
mwrPmRspiMeasRLTS2
OBJECT-TYPE
The number of seconds below the second received power level threshold.
1.3.6.1.4.1.7262.4.5.16.2.1.1.14Integer32read-onlycurrent
mwrPmRspiMeasRLTS3
OBJECT-TYPE
The number of seconds below the third received power level threshold.
1.3.6.1.4.1.7262.4.5.16.2.1.1.15Integer32read-onlycurrent
mwrPmRspiMeasRLTS4
OBJECT-TYPE
The number of seconds below the fourth received power level threshold.
1.3.6.1.4.1.7262.4.5.16.2.1.1.16Integer32read-onlycurrent
mwrPmBWTable
OBJECT-TYPE
Table containing performance monitoring measurements in 15 min and 24 hrs intervals for out BW utilization.
1.3.6.1.4.1.7262.4.5.16.2.2not-accessiblecurrent
mwrPmBWEntry
OBJECT-TYPE
Table entries containing performance monitoring measurements in 15 min and 24 hrs intervals for out BW utilization.
1.3.6.1.4.1.7262.4.5.16.2.2.1not-accessiblecurrent
mwrPmBWStatusIndex
OBJECT-TYPE
The performance monitoring out BW utilization measurements table index. Index 1 represents the radio port.
1.3.6.1.4.1.7262.4.5.16.2.2.1.1Integer32not-accessiblecurrent
mwrPmBWInterval
OBJECT-TYPE
The interval period of the row. Quarter means the 15 minutes interval and day means the 24 hours interval.
1.3.6.1.4.1.7262.4.5.16.2.2.1.2PMIntervalTypenot-accessiblecurrent
mwrPmBWIntervalID
OBJECT-TYPE
The interval identifier of the row, from 1 (last quarter) to 16 (oldest quarter) for the 15-minute and from 1 (yesterday) to 4 (4 days ago) for the 24-hour. Value 0 can be used to retrieve current measurements, according to the requested granularity.
1.3.6.1.4.1.7262.4.5.16.2.2.1.3Integer32 (0..16)not-accessiblecurrent
mwrPmBWMeasSuspect
OBJECT-TYPE
Any problem that invalidates the measurement.
1.3.6.1.4.1.7262.4.5.16.2.2.1.4TruthValueread-onlycurrent
mwrPmBWMeasIntervalStatus
OBJECT-TYPE
An indication if the interval is a valid measurement. When the system comes up, all the previous intervals are invalid.
1.3.6.1.4.1.7262.4.5.16.2.2.1.5INTEGER {invalid(1), valid(2)}read-onlycurrent
mwrPmBWMeasTimeLength
OBJECT-TYPE
The interval duration in seconds.
1.3.6.1.4.1.7262.4.5.16.2.2.1.6Integer32read-onlycurrent
mwrPmMeasBWTS1
OBJECT-TYPE
The number of seconds above the first BW utilization threshold.
1.3.6.1.4.1.7262.4.5.16.2.2.1.7Integer32read-onlycurrent
mwrPmMeasBWTS2
OBJECT-TYPE
The number of seconds above the second BW utilization threshold.
1.3.6.1.4.1.7262.4.5.16.2.2.1.8Integer32read-onlycurrent
mwrPmMeasBWTS3
OBJECT-TYPE
The number of seconds above the third BW utilization threshold.
1.3.6.1.4.1.7262.4.5.16.2.2.1.9Integer32read-onlycurrent
mwrPmMeasBWTS4
OBJECT-TYPE
The number of seconds above the fourth BW utilization threshold.
1.3.6.1.4.1.7262.4.5.16.2.2.1.10Integer32read-onlycurrent
mwrPmMeasBWTS5
OBJECT-TYPE
The number of seconds above the fifth BW utilization threshold.
1.3.6.1.4.1.7262.4.5.16.2.2.1.11Integer32read-onlycurrent
mwrPmMeasBWTS6
OBJECT-TYPE
The number of seconds above the sixth BW utilization threshold.
1.3.6.1.4.1.7262.4.5.16.2.2.1.12Integer32read-onlycurrent
mwrPmMeasBWTS7
OBJECT-TYPE
The number of seconds above the seventh BW utilization threshold.
1.3.6.1.4.1.7262.4.5.16.2.2.1.13Integer32read-onlycurrent
mwrPmMeasBWTS8
OBJECT-TYPE
The number of seconds above the eighth BW utilization threshold.
1.3.6.1.4.1.7262.4.5.16.2.2.1.14Integer32read-onlycurrent
mwrPmMeasBWTS9
OBJECT-TYPE
The number of seconds above the ninth BW utilization threshold.
1.3.6.1.4.1.7262.4.5.16.2.2.1.15Integer32read-onlycurrent
mwrPmMeasBWTS10
OBJECT-TYPE
The number of seconds above the tenth BW utilization threshold.
1.3.6.1.4.1.7262.4.5.16.2.2.1.16Integer32read-onlycurrent
mwrPmTPTable
OBJECT-TYPE
Table containing performance monitoring measurements in 15 min and 24 hrs intervals for throughput.
1.3.6.1.4.1.7262.4.5.16.2.3not-accessiblecurrent
mwrPmTPEntry
OBJECT-TYPE
Table entry containing performance monitoring throughput measurements in 15 min and 24 hrs intervals.
1.3.6.1.4.1.7262.4.5.16.2.3.1not-accessiblecurrent
mwrPmTPStatusIndex
OBJECT-TYPE
The performance monitoring throughput measurements table index. Index 1 represents the radio port.
1.3.6.1.4.1.7262.4.5.16.2.3.1.1Integer32not-accessiblecurrent
mwrPmTPInterval
OBJECT-TYPE
The interval period of the row. Quarter means the 15 minutes interval and day means the 24 hours interval.
1.3.6.1.4.1.7262.4.5.16.2.3.1.2PMIntervalTypenot-accessiblecurrent
mwrPmTPIntervalID
OBJECT-TYPE
The interval identifier of the row, from 1 (last quarter) to 16 (oldest quarter) for the 15-minute and from 1 (yesterday) to 4 (4 days ago) for the 24-hour. Value 0 can be used to retrieve current measurements, according to the requested granularity.
1.3.6.1.4.1.7262.4.5.16.2.3.1.3Integer32 (0..16)not-accessiblecurrent
mwrPmTPMeasSuspect
OBJECT-TYPE
Any problem that invalidates the measurement.
1.3.6.1.4.1.7262.4.5.16.2.3.1.4TruthValueread-onlycurrent
mwrPmTPMeasIntervalStatus
OBJECT-TYPE
An indication if the interval is a valid measurement. When the system comes up, all the previous intervals are invalid.
1.3.6.1.4.1.7262.4.5.16.2.3.1.5INTEGER {invalid(1), valid(2)}read-onlycurrent
mwrPmTPMeasTimeLength
OBJECT-TYPE
The interval duration in seconds.
1.3.6.1.4.1.7262.4.5.16.2.3.1.6Integer32read-onlycurrent
mwrPmMeasTPTS1
OBJECT-TYPE
The number of seconds above the first throughput threshold.
1.3.6.1.4.1.7262.4.5.16.2.3.1.7Integer32read-onlycurrent
mwrPmMeasTPTS2
OBJECT-TYPE
The number of seconds above the second throughput threshold.
1.3.6.1.4.1.7262.4.5.16.2.3.1.8Integer32read-onlycurrent
mwrPmMeasTPTS3
OBJECT-TYPE
The number of seconds above the third throughput threshold.
1.3.6.1.4.1.7262.4.5.16.2.3.1.9Integer32read-onlycurrent
mwrPmMeasTPTS4
OBJECT-TYPE
The number of seconds above the fourth throughput threshold.
1.3.6.1.4.1.7262.4.5.16.2.3.1.10Integer32read-onlycurrent
mwrPmMeasTPTS5
OBJECT-TYPE
The number of seconds above the fifth throughput threshold.
1.3.6.1.4.1.7262.4.5.16.2.3.1.11Integer32read-onlycurrent
mwrPmMeasTPTS6
OBJECT-TYPE
The number of seconds above the sixth throughput threshold.
1.3.6.1.4.1.7262.4.5.16.2.3.1.12Integer32read-onlycurrent
mwrPmMeasTPTS7
OBJECT-TYPE
The number of seconds above the seventh throughput threshold.
1.3.6.1.4.1.7262.4.5.16.2.3.1.13Integer32read-onlycurrent
mwrPmMeasTPTS8
OBJECT-TYPE
The number of seconds above the eighth throughput threshold.
1.3.6.1.4.1.7262.4.5.16.2.3.1.14Integer32read-onlycurrent
mwrPmMeasTPTS9
OBJECT-TYPE
The number of seconds above the ninth throughput threshold.
1.3.6.1.4.1.7262.4.5.16.2.3.1.15Integer32read-onlycurrent
mwrPmMeasTPTS10
OBJECT-TYPE
The number of seconds above the tenth throughput threshold.
1.3.6.1.4.1.7262.4.5.16.2.3.1.16Integer32read-onlycurrent
mwrPmAdvTable
OBJECT-TYPE
The advanced performance monitoring measurements table.
1.3.6.1.4.1.7262.4.5.16.2.4not-accessiblecurrent
mwrPmAdvEntry
OBJECT-TYPE
The advanced performance monitoring measurements table entries.
1.3.6.1.4.1.7262.4.5.16.2.4.1not-accessiblecurrent
mwrPmAdvStatusIndex
OBJECT-TYPE
The advanced performance monitoring measurements table index. Index 1 represents the radio port.
1.3.6.1.4.1.7262.4.5.16.2.4.1.1Integer32not-accessiblecurrent
mwrPmAdvInterval
OBJECT-TYPE
The interval period of the row. Quarter means the 15 minutes interval and day means the 24 hours interval.
1.3.6.1.4.1.7262.4.5.16.2.4.1.2PMIntervalTypenot-accessiblecurrent
mwrPmAdvIntervalID
OBJECT-TYPE
The interval identifier of the row, from 1 (last quarter) to 16 (oldest quarter) for the 15-minute and from 1 (yesterday) to 4 (4 days ago) for the 24-hour. Value 0 can be used to retrieve current measurements, according to the requested granularity.
1.3.6.1.4.1.7262.4.5.16.2.4.1.3Integer32 (0..16)not-accessiblecurrent
mwrPmAdvMeasSuspect
OBJECT-TYPE
Any problem that invalidates the measurement.
1.3.6.1.4.1.7262.4.5.16.2.4.1.4TruthValueread-onlycurrent
mwrPmAdvMeasIntervalStatus
OBJECT-TYPE
An indication if the interval is a valid measurement. When the system comes up, all the previous intervals are invalid.
1.3.6.1.4.1.7262.4.5.16.2.4.1.5INTEGER {invalid(1), valid(2)}read-onlycurrent
mwrPmAdvMeasTimeLength
OBJECT-TYPE
The interval duration in seconds.
1.3.6.1.4.1.7262.4.5.16.2.4.1.6Integer32read-onlycurrent
mwrPmAdvTxCapPeak
OBJECT-TYPE
The number of bits per second peak transmitted capacity during the time interval.
1.3.6.1.4.1.7262.4.5.16.2.4.1.7Integer32read-onlycurrent
mwrPmAdvTxCapRatio
OBJECT-TYPE
The percentage of peak transmitted capacity referred to the total allowed capacity during the time interval.
1.3.6.1.4.1.7262.4.5.16.2.4.1.8Integer32read-onlycurrent
mwrPmAdvTxCapAvg
OBJECT-TYPE
The number of bits per second average transmitted capacity during the time interval.
1.3.6.1.4.1.7262.4.5.16.2.4.1.9Integer32read-onlycurrent
mwrPmAdvTxCapAvgRatio
OBJECT-TYPE
The percentage of average transmitted capacity during the time interval.
1.3.6.1.4.1.7262.4.5.16.2.4.1.10Integer32read-onlycurrent
mwrPmAdvTxCapHits
OBJECT-TYPE
The number of seconds where the transmitted capacity has overcome a configurable threshold during the time interval.
1.3.6.1.4.1.7262.4.5.16.2.4.1.11Integer32read-onlycurrent
mwrPmAdvRxCapPeak
OBJECT-TYPE
The number of bits per second peak received capacity during the time interval.
1.3.6.1.4.1.7262.4.5.16.2.4.1.12Integer32read-onlycurrent
mwrPmAdvRxCapRatio
OBJECT-TYPE
The percentage of peak received capacity referred to the total allowed capacity during the time interval.
1.3.6.1.4.1.7262.4.5.16.2.4.1.13Integer32read-onlycurrent
mwrPmAdvRxCapAvg
OBJECT-TYPE
The number of bits per second average received capacity during the time interval.
1.3.6.1.4.1.7262.4.5.16.2.4.1.14Integer32read-onlycurrent
mwrPmAdvRxCapHits
OBJECT-TYPE
The number of seconds where the received capacity has overcome a configurable threshold during the time interval.
1.3.6.1.4.1.7262.4.5.16.2.4.1.15Integer32read-onlycurrent
mwrPMNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.16.3
mwrUserMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.17
mwrUserConfiguration
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.17.1
mwrUserStatus
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.17.2
mwrUserSessionTable
OBJECT-TYPE
A table of user sessions
1.3.6.1.4.1.7262.4.5.17.2.1not-accessiblecurrent
mwrUserSessionEntry
OBJECT-TYPE
User session entry
1.3.6.1.4.1.7262.4.5.17.2.1.1not-accessiblecurrent
mwrUserIndex
OBJECT-TYPE
A unique value for each user.
1.3.6.1.4.1.7262.4.5.17.2.1.1.1INTEGER {user1(1), user2(2), user3(3), user4(4), user5(5), user6(6), user7(7), user8(8), user9(9), user10(10), user11(11), user12(12), user13(13), user14(14), user15(15), user16(16), user17(17), user18(18), user19(19), user20(20)}not-accessiblecurrent
mwrUserName
OBJECT-TYPE
The username of a management session using Telnet or HTTP. The session state variable must be checked to determine if the management session is currently in progress.
1.3.6.1.4.1.7262.4.5.17.2.1.1.2DisplayString (SIZE(0..32))read-onlycurrent
mwrUserConnectionType
OBJECT-TYPE
Either telnet, ssh, http or https. Ethernet connection may be through any physical port(s) dedicated to management of the equipment.
1.3.6.1.4.1.7262.4.5.17.2.1.1.3DisplayStringread-onlycurrent
mwrUserConnectionState
OBJECT-TYPE
The state of the session. The session is inProgress if the user is currently logged into the system. The session is terminated if the user has logged out of the system.
1.3.6.1.4.1.7262.4.5.17.2.1.1.4INTEGER {informationNotAvailable(1), sessionTerminated(2), sessionInProgress(3)}read-onlycurrent
mwrUserNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.7262.4.5.17.3

Notifications

NameOIDStatus
mwrSysTcfInvalid
NOTIFICATION-TYPE
This notification is raised when The HW specific factory defined information (TCF) in the system is not valid.
1.3.6.1.4.1.7262.4.5.2.5.1current
mwrSysTempOutOfLimit
NOTIFICATION-TYPE
This notification is raised when the system temperature is out of limits.
1.3.6.1.4.1.7262.4.5.2.5.2current
mwrSynceLostLock
NOTIFICATION-TYPE
This notification is raised when system has lost synchronization to syncE clock source.
1.3.6.1.4.1.7262.4.5.5.3.1current
mwrSynceSecondarySourceInUse
NOTIFICATION-TYPE
This notification is raised whens ystem has lost synchronization to primary syncE clock source, and now synchronized to secondary source.
1.3.6.1.4.1.7262.4.5.5.3.2current
mwrSynceConfigMismatch
NOTIFICATION-TYPE
This notification is raised when the configuration of syncE between the peers in the radio link is mismatched.
1.3.6.1.4.1.7262.4.5.5.3.3current
mwrSntpServerUnreachable
NOTIFICATION-TYPE
This notification is raised when one or more of the configured SNTP server is not reachable by the system.
1.3.6.1.4.1.7262.4.5.6.4.1current
mwrSystemTimeCorrected
NOTIFICATION-TYPE
This notification is raised change in system time is detected, and system time is adjusted
1.3.6.1.4.1.7262.4.5.6.4.2current
mwrDroppedPktsThreshold
NOTIFICATION-TYPE
This notification is raised when the ethernet packet drops in an interface has exceeded user set limit.
1.3.6.1.4.1.7262.4.5.9.4.1current
mwrRadioQDroppedPktsThreshold
NOTIFICATION-TYPE
This notification is raised when Ethernet packet drops over radio traffic queue has exceeded the user configured limit. The mwrRadioQThresholdAlarmIndex varbind indicates specific queue number.
1.3.6.1.4.1.7262.4.5.9.4.2current
mwrRadioQDepthThreshold
NOTIFICATION-TYPE
This notification is raised when the data buffered in the specific radio traffic queue has exceeded the user set limit. The mwrRadioQThresholdAlarmIndex varbind indicates specific queue number.
1.3.6.1.4.1.7262.4.5.9.4.3current
mwrOutBWUtilizationThreshold
NOTIFICATION-TYPE
This notification is raised when the out bandwidth utilization of an interface has exceeded the user configured limit.
1.3.6.1.4.1.7262.4.5.9.4.4current
mwrThroughputThreshold
NOTIFICATION-TYPE
This notification is raised when the throughput of an interface has exceeded the user configured limit.
1.3.6.1.4.1.7262.4.5.9.4.5current
mwrAcmConfigMismatch
NOTIFICATION-TYPE
This notification is raised when ACM configuration mismatch between the link partners.
1.3.6.1.4.1.7262.4.5.10.4.1current
mwrAcmProfileLowered
NOTIFICATION-TYPE
This notification is raised when system is executing ACM and working at a lower radio profile than the configured nominal radio profile.
1.3.6.1.4.1.7262.4.5.10.4.2current
mwrAcmProfileChanged
NOTIFICATION-TYPE
This notification is raised when system is executing in ACM and has changed the radio profile.
1.3.6.1.4.1.7262.4.5.10.4.3current
mwrAtpcConfigMismatch
NOTIFICATION-TYPE
This notification is raised when ATPC configuration mismatch has occurred between link partners.
1.3.6.1.4.1.7262.4.5.11.3.1current
mwrAtpcAutoDisabled
NOTIFICATION-TYPE
This notification is raised when ATPC is automatically disabled due to coordinated power condition. When this notification is raised the radio will be transmitting at coordinated power. The mwrAtpcStatusIndex varbind indicates the radio instance.
1.3.6.1.4.1.7262.4.5.11.3.2current
mwrUserSession
NOTIFICATION-TYPE
This notification is raised when a change in the state of user access is recognized, a new user has logged in or an existing user has logged out.
1.3.6.1.4.1.7262.4.5.17.3.1current
mwrUserLoginFailed
NOTIFICATION-TYPE
This notification is raised when a user has failed to login.
1.3.6.1.4.1.7262.4.5.17.3.2current
mwrUserAccountChanged
NOTIFICATION-TYPE
This notification is raised when a change in user account information in the system is detected.
1.3.6.1.4.1.7262.4.5.17.3.3current
mwrUserPasswordChanged
NOTIFICATION-TYPE
This notification is raised when a user password has changed.
1.3.6.1.4.1.7262.4.5.17.3.4current