MSERIES-TC
- Registered at
- 1.3.6.1.4.1.30826.1.5
- Last updated
- 2014-02-12 13:27
- Organization
- SmartOptics
- Revisions
- 2014-02-12 13:27, 2013-10-15 13:41, 2011-12-05 00:00
- Namespace
- smartoptics
- Source file
MSERIES-TC- Digest
sha256:4d415950b3abf126c342d71764915e3d7c7c1e2fd2b5b99a27cd5acbdceb6f78
Description
This is the enterprise specific TC MIB for SmartOptics M-Series
Contact
http://www.smartoptics.com
Imports
| From | Symbols |
|---|---|
| MSERIES-MIB | mseries |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
2 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
MSERIES-MIB MSERIES-TC SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| AlarmNotificationType TEXTUAL-CONVENTION Type of alarm as defined in ITU-T X.733. | current | |||
| AlarmPerceivedSeverity TEXTUAL-CONVENTION Alarm severity as defined in ITU-T X.733. | current | |||
| AlarmProbableCause TEXTUAL-CONVENTION Alarm probable cause as defined in ITU-T X.733. | current | |||
| PortMode TEXTUAL-CONVENTION Port Mode. normal - The port is active. Alarms are not suppressed. service - the port is in Service Mode. Alarms are beeing suppressed. When service is ready the Port Mode should be set back to normal. | current | |||
| PortStatus TEXTUAL-CONVENTION The operational state for a port. idle - The port is not activated down - The port traffic is lost. up - There is traffic on the port. high - The port got to high power. low - The port got to low power. eyeSafety - The Line Tx port is in Eye Safety Mode. This means that either the connector on the Line Tx port is not inserted or that you have too strong reflection from the line fiber. cd - Channel detected. ncd - No channel detected. | current | |||
| PortType TEXTUAL-CONVENTION Port direction. rx - The port direction is receiving(Rx). tx - The port direction is transmitting(Tx). biDi - The port direction is both transmitting and receiving. | current | |||
| UnitType TEXTUAL-CONVENTION The unit type in the M-Series. nmb - Network Management Board. The controlling board of the M-Series. psu1 - The Power Supply in slot 1 of the M-Series. psu2 - The Power Supply in slot 2 of the M-Series. fan - The Fan of the M-Series. system - The chassis. slaveNmb - Network Management Board of the Cascading system. slavePsu1 - The Power Supply in slot 1 of the Cascading M-Series. slavePsu2 - The Power Supply in slot 2 of the Cascading M-Series. slaveFan - The Fan of the Cascading M-Series. | current |