MIBs Depot

MSERIES-PORT-MIB

Registered at
1.3.6.1.4.1.30826.1.3
Last updated
2014-02-12 13:44
Organization
SmartOptics
Revisions
2014-02-12 13:44
Namespace
smartoptics
Source file
MSERIES-PORT-MIB
Digest
sha256:941ed0779836caf8526323f6bf5f688cfec78b6af1a1630e458a927332ab67d6

Description

This is the enterprise specific Port MIB for SmartOptics M-Series.

Contact

http://www.smartoptics.com

Imports

FromSymbols
MSERIES-MIBmseries
MSERIES-TCPortMode, PortStatus, PortType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

MSERIES-MIB
MSERIES-PORT-MIB
MSERIES-TC
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
smartPortObjects
OBJECT-IDENTITY
1.3.6.1.4.1.30826.1.3.1
smartPortGeneral
OBJECT-IDENTITY
1.3.6.1.4.1.30826.1.3.1.1
smartPortList
OBJECT-IDENTITY
1.3.6.1.4.1.30826.1.3.1.2
smartPortTable
OBJECT-TYPE
A port table.
1.3.6.1.4.1.30826.1.3.1.2.1not-accessiblecurrent
smartPortEntry
OBJECT-TYPE
An entry in the port list.
1.3.6.1.4.1.30826.1.3.1.2.1.1not-accessiblecurrent
smartPortIndex
OBJECT-TYPE
A unique index for each port that corresponds to the index in the interface table
1.3.6.1.4.1.30826.1.3.1.2.1.1.1Unsigned32 (1..2147483647)read-onlycurrent
smartPortName
OBJECT-TYPE
The name of the port.
1.3.6.1.4.1.30826.1.3.1.2.1.1.2DisplayStringread-onlycurrent
smartPortAlias
OBJECT-TYPE
User configurable Port Alias for the port. Not writeable in SmartOS v2.3
1.3.6.1.4.1.30826.1.3.1.2.1.1.3DisplayStringread-writecurrent
smartPortType
OBJECT-TYPE
The type of port. rx(1) - Receiving port. tx(2) - Transmitting port. biDi(3) - Bidirectional port.
1.3.6.1.4.1.30826.1.3.1.2.1.1.4PortTyperead-onlycurrent
smartPortPower
OBJECT-TYPE
The power level in units of 0.1 dBm.
1.3.6.1.4.1.30826.1.3.1.2.1.1.5Integer32read-onlycurrent
smartPortStatus
OBJECT-TYPE
The operational state for a port. idle(1) - The port is not activated down(2) - The port traffic is lost. up(3) - There is traffic on the port. high(4) - The port got to high power. low(5) - The port got to low power. eyeSafety(6) - The Line Tx port is in Eye Safety Mode. This means that either the connector on the Line Tx port is not inserted or that you have too strong reflection from the line fiber. cd(7) - Channel detected. ncd(8) - No channel detected.
1.3.6.1.4.1.30826.1.3.1.2.1.1.6PortStatusread-onlycurrent
smartPortMode
OBJECT-TYPE
The Mode of the Port. normal (1) - The port is active. No alarms are beeing suppressed. service (2) . The port is in service mode and alarms are beeing suppressed. When service is ready smartPortMode should be set to 'normal' again. Not writeable in SmartOS v2.3
1.3.6.1.4.1.30826.1.3.1.2.1.1.7PortModeread-writecurrent
smartPortHighPowerAlarmThreshold
OBJECT-TYPE
The threshold for the High Power alarm. Not writeable in SmartOS v2.3
1.3.6.1.4.1.30826.1.3.1.2.1.1.8Integer32read-writecurrent
smartPortLowPowerAlarmThreshold
OBJECT-TYPE
The threshold for the Low Power alarm. Not writeable in SmartOS v2.3
1.3.6.1.4.1.30826.1.3.1.2.1.1.9Integer32read-writecurrent
smartPortMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.30826.1.3.2
smartPortGroups
OBJECT-IDENTITY
1.3.6.1.4.1.30826.1.3.2.1
smartPortCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.30826.1.3.2.2

Conformance

NameOIDStatus
smartPortListGroupV1
OBJECT-GROUP
The Port List MIB objects v1.
1.3.6.1.4.1.30826.1.3.2.1.1current
smartPortBasicComplV1
MODULE-COMPLIANCE
Basic implementation requirements for the port MIB V1.
1.3.6.1.4.1.30826.1.3.2.2.1current