MPLS-LSR-MIB
- Registered at
- 1.3.6.1.3.96
- Last updated
- 2000-04-26 12:00
- Organization
- Multiprotocol Label Switching (MPLS) Working Group
- Revisions
- 1999-06-16 12:00, 2000-02-16 12:00, 2000-03-06 12:00, 2000-04-21 12:00, 2000-04-26 12:00
- Namespace
- standard
- Source file
MPLS-LSR-MIB- Digest
sha256:a047c3ebafc80a733f65e5e72c5d42c71cd17330afbc2cf2e6c88228e22165dd
Description
This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS) Router as defined in: Rosen, E., Viswanathan, A., and R. Callon, Multiprotocol Label Switching Architecture, Internet Draft <draft-ietf-mpls-arch-06.txt>, February 2000.
Contact
Cheenu Srinivasan Postal: Tachion Networks, Inc. Monmouth Park Corporate Center I Building C, 185 Monmouth Parkway West Long Branch, NJ 07764 Tel: +1-732-542-7750 x1234 Email: cheenu@tachion.com Arun Viswanathan Postal: Force10 Networks, Inc. 1440 McCarthy Blvd Milpitas, CA 95035 Tel: +1-408-571-3516 Email: arun@force10networks.com Thomas D. Nadeau Postal: Cisco Systems, Inc. 250 Apollo Drive Chelmsford, MA 01824 Tel: +1-978-244-3051 Email: tnadeau@cisco.com
Imports
| From | Symbols |
|---|---|
| IANA-ADDRESS-FAMILY-NUMBERS-MIB | AddressFamilyNumbers |
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddressIPv4, InetAddressIPv6, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Counter64, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, experimental, iso |
| SNMPv2-TC | DisplayString, RowPointer, RowStatus, StorageType, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
Imported by
4 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANA-ADDRESS-FAMILY-NUMBERS-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB MPLS-LSR-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| MplsBitRate TEXTUAL-CONVENTION An estimate of bandwidth in units of 1,000 bits per second. If this object reports a value of 'n' then the rate of the object is somewhere in the range of 'n-500' to 'n+499'. For objects which do not vary in bitrate, or for those where no accurate estimation can be made, this object should contain the nominal bitrate. | current | |||
| MplsBufferSize TEXTUAL-CONVENTION Size of buffer in octets of MPLS data. | current | |||
| MplsBurstSize TEXTUAL-CONVENTION The number of octets of MPLS data that the stream may send back-to-back without concern for policing. | current | |||
| MplsLSPID TEXTUAL-CONVENTION An identifier that is assigned to each LSP and is used to uniquely identify it. This is assigned at the head end of the LSP and can be used by all LSRs to identify this LSP. This value is piggybacked by the signaling protocol when this LSP is signaled within the network. This identifier can then be used at each LSR to identify which labels are being swapped to other labels for this LSP. For IPv4 addresses this results in a 6-octet long cookie. | current | |||
| MplsLabel TEXTUAL-CONVENTION This value represents an MPLS label. Note that the contents of a label field are interpreted in an interface-type specific fashion. For example, the 20-bit wide label carried in the MPLS shim header is contained in bits 0-19 and bits 20-31 must be zero. The frame relay label can be either 10 or 23 bits wide depending on the size of the DLCI field and bits 10-31, or 23-31 must be zero, respectively. For an ATM interface, bits 0-15 must be interpreted as the VCI, bits 16-23 as the VPI and bits 24-31 must be zero. Note that the permissible label values are also a function of the interface type. For example, the value 3 has special semantics in the control plane for an MPLS shim header label and is not a valid label value in the data path. | current | |||
| MplsObjectOwner TEXTUAL-CONVENTION The entity which owns the object in question. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| mplsLsrObjects OBJECT-IDENTITY | 1.3.6.1.3.96.1 | |||
| mplsInterfaceConfTable OBJECT-TYPE This table specifies per-interface MPLS capability and associated information. | 1.3.6.1.3.96.1.1 | not-accessible | current | |
| mplsInterfaceConfEntry OBJECT-TYPE An entry in this table is created by an LSR for every interface capable of supporting MPLS. The entry with index 0 represents the per-platform label space and contains parameters that apply to all interfaces that participate in the per-platform label space. Other entries defined in this table represent additional MPLS interfaces that may participate in either the per-platform or per- interface label spaces, or both. Additional information about label space participation of an interface is provided in the description clause of mplsInterfaceLabelParticipationType. | 1.3.6.1.3.96.1.1.1 | not-accessible | current | |
| mplsInterfaceConfIndex OBJECT-TYPE This is a unique index for an entry in the MplsInterfaceConfTable. A non-zero index for an entry indicates the ifIndex for the corresponding interface entry in of the MPLS-layer in the ifTable. Note that the per-platform label space may apply to several interfaces, and therefore the configuration of the per-platform label space interface parameters will apply to all of the interfaces that are participating in the per-platform label space. | 1.3.6.1.3.96.1.1.1.1 | InterfaceIndexOrZero | not-accessible | current |
| mplsInterfaceLabelMinIn OBJECT-TYPE This is the minimum value of an MPLS label that this LSR is willing to receive on this interface. | 1.3.6.1.3.96.1.1.1.2 | MplsLabel | read-only | current |
| mplsInterfaceLabelMaxIn OBJECT-TYPE This is the maximum value of an MPLS label that this LSR is willing to receive on this interface. | 1.3.6.1.3.96.1.1.1.3 | MplsLabel | read-only | current |
| mplsInterfaceLabelMinOut OBJECT-TYPE This is the minimum value of an MPLS label that this LSR is willing to send on this interface. | 1.3.6.1.3.96.1.1.1.4 | MplsLabel | read-only | current |
| mplsInterfaceLabelMaxOut OBJECT-TYPE This is the maximum value of an MPLS label that this LSR is willing to send on this interface. | 1.3.6.1.3.96.1.1.1.5 | MplsLabel | read-only | current |
| mplsInterfaceTotalBandwidth OBJECT-TYPE This value indicates the total amount of usable bandwidth on this interface and is specified in kilobits per second (Kbps). This variable is not applicable when applied to the interface with index 0. | 1.3.6.1.3.96.1.1.1.6 | MplsBitRate | read-only | current |
| mplsInterfaceAvailableBandwidth OBJECT-TYPE This value indicates the total amount of available bandwidth available on this interface and is specified in kilobits per second (Kbps). This value is calculated as the difference between the amount of bandwidth currently in use and that specified in mplsInterfaceTotalBandwidth. This variable is not applicable when applied to the interface with index 0. | 1.3.6.1.3.96.1.1.1.7 | MplsBitRate | read-only | current |
| mplsInterfaceTotalBuffer OBJECT-TYPE This value indicates the total amount of buffer space allocated for this interface. This variable is not applicable when applied to the interface with index 0. | 1.3.6.1.3.96.1.1.1.8 | MplsBufferSize | read-only | current |
| mplsInterfaceAvailableBuffer OBJECT-TYPE This value reflects the total amount of buffer space available on this interface. This variable is not applicable when applied to the interface with index 0. | 1.3.6.1.3.96.1.1.1.9 | MplsBufferSize | read-only | current |
| mplsInterfaceLabelParticipationType OBJECT-TYPE Either the perPlatform(0) or perInterface(1) bit MUST be set. If the value of the mplsInterfaceConfIndex for this entry is zero, then only the perPlatform(0) bit MUST be set and the perInterface(1) bit is meaningless. If the perInterface(1) bit is set then the value of mplsInterfaceLabelMinIn, mplsInterfaceLabelMaxIn, mplsInterfaceLabelMinOut, and mplsInterfaceLabelMaxOut for this entry reflect the label ranges for this interface. If only the perPlatform(0) bit is set, then the value of mplsInterfaceLabelMinIn, mplsInterfaceLabelMaxIn, mplsInterfaceLabelMinOut, and mplsInterfaceLabelMaxOut for this entry must be identical to the instance of these objects with index 0. | 1.3.6.1.3.96.1.1.1.10 | Bits {perPlatform(0), perInterface(1)} | read-only | current |
| mplsInterfaceConfStorageType OBJECT-TYPE The storage type for this entry. | 1.3.6.1.3.96.1.1.1.11 | StorageType | read-create | current |
| mplsInterfacePerfTable OBJECT-TYPE This table provides MPLS performance information on a per-interface basis. | 1.3.6.1.3.96.1.2 | not-accessible | current | |
| mplsInterfacePerfEntry OBJECT-TYPE An entry in this table is created by the LSR for every interface capable of supporting MPLS. Its is an extension to the mplsInterfaceConfEntry table. | 1.3.6.1.3.96.1.2.1 | not-accessible | current | |
| mplsInterfaceInLabelsUsed OBJECT-TYPE This value indicates the specific number of labels that are in use at this point in time on this interface in the incoming direction. | 1.3.6.1.3.96.1.2.1.1 | Gauge32 | read-only | current |
| mplsInterfaceInPackets OBJECT-TYPE This variable reflects the number of labeled packets that have been received on this interface. | 1.3.6.1.3.96.1.2.1.2 | Counter32 | read-only | current |
| mplsInterfaceInDiscards OBJECT-TYPE The number of inbound labeled packets, which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a labeled packet could be to free up buffer space. | 1.3.6.1.3.96.1.2.1.3 | Counter32 | read-only | current |
| mplsInterfaceFailedLabelLookup OBJECT-TYPE This value indicates the number of labeled packets that have been received on this interface and were discarded because there were no matching entries found for them in mplsInSegmentTable. | 1.3.6.1.3.96.1.2.1.4 | Counter32 | read-only | current |
| mplsInterfaceOutLabelsUsed OBJECT-TYPE Indicates the number of top-most labels in the outgoing label stacks that are in use at this point in time on this interface. | 1.3.6.1.3.96.1.2.1.5 | Gauge32 | read-only | current |
| mplsInterfaceOutPackets OBJECT-TYPE This variable contains the number of labeled packets that have been transmitted on this interface. | 1.3.6.1.3.96.1.2.1.6 | Counter32 | read-only | current |
| mplsInterfaceOutDiscards OBJECT-TYPE The number of outbound labeled packets, which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a labeled packet could be to free up buffer space. | 1.3.6.1.3.96.1.2.1.7 | Counter32 | read-only | current |
| mplsInterfaceOutFragments OBJECT-TYPE This variable indicates the number of outgoing MPLS packets that required fragmentation before transmission on this interface. | 1.3.6.1.3.96.1.2.1.8 | Counter32 | read-only | current |
| mplsInSegmentTable OBJECT-TYPE This table contains a collection of incoming segments to an LSR. | 1.3.6.1.3.96.1.3 | not-accessible | current | |
| mplsInSegmentEntry OBJECT-TYPE An entry in this table represents one incoming segment. An entry can be created by a network administrator or an SNMP agent, or an MPLS signaling protocol. The creator of the entry is denoted by mplsInSegmentOwner. An entry in this table is indexed by the ifIndex of the incoming interface and the (top) label. | 1.3.6.1.3.96.1.3.1 | not-accessible | current | |
| mplsInSegmentIfIndex OBJECT-TYPE This is a unique index for an entry in the MplsInSegmentTable. This value represents the interface index for the incoming MPLS interface. A value of zero represents an incoming label from the per-platform label space. In this case, the mplsInSegmentLabel is interpreted to be an MPLS-type label. | 1.3.6.1.3.96.1.3.1.1 | InterfaceIndexOrZero | not-accessible | current |
| mplsInSegmentLabel OBJECT-TYPE The incoming label for this segment. | 1.3.6.1.3.96.1.3.1.2 | MplsLabel | not-accessible | current |
| mplsInSegmentNPop OBJECT-TYPE The number of labels to pop from the incoming packet. Normally only the top label is popped from the packet and used for all switching decisions for that packet. Note that technologies which do not support label popping should set this value to its default value of 1. | 1.3.6.1.3.96.1.3.1.3 | Integer32 (1..2147483647) | read-create | current |
| mplsInSegmentAddrFamily OBJECT-TYPE The IANA address family [IANAFamily] of the incoming packet. A value of other(0) indicates that the family type is either unknown or undefined. | 1.3.6.1.3.96.1.3.1.4 | AddressFamilyNumbers | read-create | current |
| mplsInSegmentXCIndex OBJECT-TYPE Index into mplsXCTable which identifies which cross- connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any cross-connect entry. When a cross-connect entry is created which this in-segment is a part of, this object is automatically updated to reflect the value of mplsXCIndex of that cross-connect entry. | 1.3.6.1.3.96.1.3.1.5 | Integer32 (0..2147483647) | read-only | current |
| mplsInSegmentOwner OBJECT-TYPE Denotes the entity that created and is responsible for managing this segment. | 1.3.6.1.3.96.1.3.1.6 | MplsObjectOwner | read-create | current |
| mplsInSegmentTrafficParamPtr OBJECT-TYPE This variable represents a pointer to the traffic parameter specification for this in-segment. This value may point at an entry in the mplsTrafficParamTable to indicate which mplsTrafficParamEntry is to be assigned to this segment. This value may optionally point at an externally defined traffic parameter specification table. A value of zero-dot-zero indicates best-effort treatment. By having the same value of this object, two or more segments can indicate resource sharing. | 1.3.6.1.3.96.1.3.1.7 | RowPointer | read-create | current |
| mplsInSegmentRowStatus OBJECT-TYPE This variable is used to create, modify, and/or delete a row in this table. | 1.3.6.1.3.96.1.3.1.8 | RowStatus | read-create | current |
| mplsInSegmentStorageType OBJECT-TYPE This variable indicates the storage type for this object. | 1.3.6.1.3.96.1.3.1.9 | StorageType | read-create | current |
| mplsInSegmentAdminStatus OBJECT-TYPE This value is used to represent the manager’s desired operational status of this segment. | 1.3.6.1.3.96.1.3.1.10 | INTEGER {up(1), down(2), testing(3)} | read-create | current |
| mplsInSegmentOperStatus OBJECT-TYPE This value represents the actual operational status of this segment. | 1.3.6.1.3.96.1.3.1.11 | INTEGER {up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), lowerLayerDown(7)} | read-only | current |
| mplsInSegmentPerfTable OBJECT-TYPE This table contains statistical information for incoming MPLS segments to an LSR. | 1.3.6.1.3.96.1.4 | not-accessible | current | |
| mplsInSegmentPerfEntry OBJECT-TYPE An entry in this table contains statistical information about one incoming segment which was configured in the mplsInSegmentTable. The counters in this entry should behave in a manner similar to that of the interface. | 1.3.6.1.3.96.1.4.1 | not-accessible | current | |
| mplsInSegmentOctets OBJECT-TYPE This value represents the total number of octets received by this segment. | 1.3.6.1.3.96.1.4.1.1 | Counter32 | read-only | current |
| mplsInSegmentPackets OBJECT-TYPE Total number of packets received by this segment. | 1.3.6.1.3.96.1.4.1.2 | Counter32 | read-only | current |
| mplsInSegmentErrors OBJECT-TYPE The number of errored packets received on this segment. | 1.3.6.1.3.96.1.4.1.3 | Counter32 | read-only | current |
| mplsInSegmentDiscards OBJECT-TYPE The number of labeled packets received on this in- segment, which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a labeled packet could be to free up buffer space. | 1.3.6.1.3.96.1.4.1.4 | Counter32 | read-only | current |
| mplsInSegmentHCOctets OBJECT-TYPE The total number of octets received. This is the 64 bit version of mplsInSegmentOctets. | 1.3.6.1.3.96.1.4.1.5 | Counter64 | read-only | current |
| mplsInSegmentPerfDiscontinuityTime OBJECT-TYPE The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 or Counter64 suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value. | 1.3.6.1.3.96.1.4.1.6 | TimeStamp | read-only | current |
| mplsOutSegmentIndexNext OBJECT-TYPE This object contains the next appropriate value to be used for mplsOutSegmentIndex when creating entries in the mplsOutSegmentTable. If the number of unassigned entries is exhausted, this object will take on the value of 0. To obtain the mplsOutSegmentIndex value for a new entry, the manager must first issue a management protocol retrieval operation to obtain the current value of this object. The agent should modify the value to reflect the next unassigned index after each retrieval operation. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse. | 1.3.6.1.3.96.1.5 | Integer32 (0..2147483647) | read-only | current |
| mplsOutSegmentTable OBJECT-TYPE This table contains a representation of the outgoing segments from an LSR. | 1.3.6.1.3.96.1.6 | not-accessible | current | |
| mplsOutSegmentEntry OBJECT-TYPE An entry in this table represents one outgoing segment. An entry can be created by a network administrator or an SNMP agent, or an MPLS signaling protocol. The object mplsOutSegmentOwner indicates the creator of this entry. | 1.3.6.1.3.96.1.6.1 | not-accessible | current | |
| mplsOutSegmentIndex OBJECT-TYPE This value contains a unique index for this row. While a value of 0 is not valid as an index for this row it can be supplied as a valid value to index mplsXCTable to access entries for which no out- segment has been configured. | 1.3.6.1.3.96.1.6.1.1 | Integer32 (0..2147483647) | not-accessible | current |
| mplsOutSegmentIfIndex OBJECT-TYPE This value contains the interface index of the outgoing interface. | 1.3.6.1.3.96.1.6.1.2 | InterfaceIndex | read-create | current |
| mplsOutSegmentPushTopLabel OBJECT-TYPE This value indicates whether or not a top label should be pushed onto the outgoing packet's label stack. The value of this variable must be set to true if the outgoing interface does not support pop- and-go (for example an ATM interface) or if it is a tunnel origination. Note that it is considered an error in the case that mplsOutSegmentPushTopLabel is set to false, but the cross-connect entry which refers to this out-segment has a non-zero mplsLabelStackIndex. The LSR MUST ensure that this situation does not happen | 1.3.6.1.3.96.1.6.1.3 | TruthValue | read-create | current |
| mplsOutSegmentTopLabel OBJECT-TYPE If mplsOutSegmentPushTopLabel is true then this represents the label that should be pushed onto the top of the outgoing packet's label stack. | 1.3.6.1.3.96.1.6.1.4 | MplsLabel | read-create | current |
| mplsOutSegmentNextHopIpAddrType OBJECT-TYPE Indicates whether the next hop address is IPv4 or IPv6. Note that a value of unknown (0) is valid only when the outgoing interface is of type point-to- point. | 1.3.6.1.3.96.1.6.1.5 | InetAddressType | read-create | current |
| mplsOutSegmentNextHopIpv4Addr OBJECT-TYPE IPv4 Address of the next hop. Its value is significant only when mplsOutSegmentNextHopIpAddrType is ipV4 (1), otherwise it should return a value of 0. | 1.3.6.1.3.96.1.6.1.6 | InetAddressIPv4 | read-create | current |
| mplsOutSegmentNextHopIpv6Addr OBJECT-TYPE IPv6 address of the next hop. Its value is significant only when mplsOutSegmentNextHopIpAddrType is ipV6 (2), otherwise it should return a value of 0. | 1.3.6.1.3.96.1.6.1.7 | InetAddressIPv6 | read-create | current |
| mplsOutSegmentXCIndex OBJECT-TYPE Index into mplsXCTable which identifies which cross- connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any cross-connect entry. When a cross-connect entry is created which this out-segment is a part of, this object is automatically updated to reflect the value of mplsXCIndex of that cross-connect entry. | 1.3.6.1.3.96.1.6.1.8 | Integer32 (0..2147483647) | read-only | current |
| mplsOutSegmentOwner OBJECT-TYPE Denotes the entity which created and is responsible for managing this segment. | 1.3.6.1.3.96.1.6.1.9 | MplsObjectOwner | read-create | current |
| mplsOutSegmentTrafficParamPtr OBJECT-TYPE This variable represents a pointer to the traffic parameter specification for this out-segment. This value may point at an entry in the mplsTrafficParamTable to indicate which mplsTrafficParamEntry is to be assigned to this segment. This value may optionally point at an externally defined traffic parameter specification table. A value of zero-dot-zero indicates best- effort treatment. By having the same value of this object, two or more segments can indicate resource sharing. | 1.3.6.1.3.96.1.6.1.10 | RowPointer | read-create | current |
| mplsOutSegmentRowStatus OBJECT-TYPE For creating, modifying, and deleting this row. | 1.3.6.1.3.96.1.6.1.11 | RowStatus | read-create | current |
| mplsOutSegmentStorageType OBJECT-TYPE This variable indicates the storage type for this object. | 1.3.6.1.3.96.1.6.1.12 | StorageType | read-create | current |
| mplsOutSegmentAdminStatus OBJECT-TYPE The desired operational status of this segment. | 1.3.6.1.3.96.1.6.1.13 | INTEGER {up(1), down(2), testing(3)} | read-create | current |
| mplsOutSegmentOperStatus OBJECT-TYPE The actual operational status of this segment. | 1.3.6.1.3.96.1.6.1.14 | INTEGER {up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), lowerLayerDown(7)} | read-only | current |
| mplsOutSegmentPerfTable OBJECT-TYPE This table contains statistical information about outgoing segments from an LSR. The counters in this entry should behave in a manner similar to that of the interface. | 1.3.6.1.3.96.1.7 | not-accessible | current | |
| mplsOutSegmentPerfEntry OBJECT-TYPE An entry in this table contains statistical information about one outgoing segment configured in mplsOutSegmentTable. | 1.3.6.1.3.96.1.7.1 | not-accessible | current | |
| mplsOutSegmentOctets OBJECT-TYPE This value contains the total number of octets sent on this segment. | 1.3.6.1.3.96.1.7.1.1 | Counter32 | read-only | current |
| mplsOutSegmentPackets OBJECT-TYPE This value contains the total number of packets sent on this segment. | 1.3.6.1.3.96.1.7.1.2 | Counter32 | read-only | current |
| mplsOutSegmentErrors OBJECT-TYPE Number of packets that could not be sent due to errors on this segment. | 1.3.6.1.3.96.1.7.1.3 | Counter32 | read-only | current |
| mplsOutSegmentDiscards OBJECT-TYPE The number of labeled packets received on this out- segment, which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a labeled packet could be to free up buffer space. | 1.3.6.1.3.96.1.7.1.4 | Counter32 | read-only | current |
| mplsOutSegmentHCOctets OBJECT-TYPE Total number of octets sent. This is the 64 bit version of mplsOutSegmentOctets. | 1.3.6.1.3.96.1.7.1.5 | Counter64 | read-only | current |
| mplsOutSegmentPerfDiscontinuityTime OBJECT-TYPE The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 or Counter64 suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value. | 1.3.6.1.3.96.1.7.1.6 | TimeStamp | read-only | current |
| mplsXCIndexNext OBJECT-TYPE This object contains an appropriate value to be used for mplsXCIndex when creating entries in the mplsXCTable. The value 0 indicates that no unassigned entries are available. To obtain the value of mplsXCIndex for a new entry in the mplsXCTable, the manager issues a management protocol retrieval operation to obtain the current value of mplsXCIndex. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse. | 1.3.6.1.3.96.1.8 | Integer32 (0..2147483647) | read-only | current |
| mplsXCTable OBJECT-TYPE This table specifies information for switching between LSP segments. It supports point-to-point, point-to-multipoint and multipoint-to-point connections. mplsLabelStackTable specifies the label stack information for a cross-connect LSR and is referred to from mplsXCTable. | 1.3.6.1.3.96.1.9 | not-accessible | current | |
| mplsXCEntry OBJECT-TYPE A row in this table represents one cross-connect entry. The following objects index it: - cross-connect index mplsXCIndex that uniquely identifies a group of cross-connect entries - interface index of the in-segment, mplsInSegmentIfIndex - incoming label(s), mplsInSegmentLabel - out-segment index, mplsOutSegmentIndex Originating LSPs: These are represented by using the special combination of values mplsInSegmentIfIndex=0 and mplsInSegmentLabel=0 as indexes. In this case the mplsOutSegmentIndex MUST be non-zero. Terminating LSPs: These are represented by using the special value mplsOutSegmentIndex=0 as index. Special labels: Entries indexed by reserved MPLS label values 0 through 15 imply terminating LSPs and MUST have mplsOutSegmentIfIndex = 0. Note that situations where LSPs are terminated with incoming label equal to 0, should have mplsInSegmentIfIndex = 0 as well, but can be distinguished from originating LSPs because the mplsOutSegmentIfIndex = 0. The mplsOutSegmentIfIndex MUST only be set to 0 in cases of terminating LSPs. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signaling protocol. | 1.3.6.1.3.96.1.9.1 | not-accessible | current | |
| mplsXCIndex OBJECT-TYPE Primary index for the row identifying a group of cross-connect segments. | 1.3.6.1.3.96.1.9.1.1 | Integer32 (1..2147483647) | not-accessible | current |
| mplsXCLspId OBJECT-TYPE This value identifies the label switched path that this cross-connect entry belongs to. | 1.3.6.1.3.96.1.9.1.2 | MplsLSPID | read-create | current |
| mplsXCLabelStackIndex OBJECT-TYPE Primary index into mplsLabelStackTable identifying a stack of labels to be pushed beneath the top label. Note that the top label identified by the out- segment ensures that all the components of a multipoint-to-point connection have the same outgoing label. A value of 0 indicates that no labels are to be stacked beneath the top label. | 1.3.6.1.3.96.1.9.1.3 | Integer32 (0..2147483647) | read-create | current |
| mplsXCIsPersistent OBJECT-TYPE Denotes whether or not this cross-connect entry and associated in- and out-segments should be restored automatically after failures. This value MUST be set to false in cases where this cross-connect entry was created by a signaling protocol. | 1.3.6.1.3.96.1.9.1.4 | TruthValue | read-create | current |
| mplsXCOwner OBJECT-TYPE Denotes the entity that created and is responsible for managing this cross-connect. | 1.3.6.1.3.96.1.9.1.5 | MplsObjectOwner | read-create | current |
| mplsXCRowStatus OBJECT-TYPE For creating, modifying, and deleting this row. | 1.3.6.1.3.96.1.9.1.6 | RowStatus | read-create | current |
| mplsXCStorageType OBJECT-TYPE Defines the storage type for this object. | 1.3.6.1.3.96.1.9.1.7 | StorageType | read-create | current |
| mplsXCAdminStatus OBJECT-TYPE The desired operational status of this segment. | 1.3.6.1.3.96.1.9.1.8 | INTEGER {up(1), down(2), testing(3)} | read-create | current |
| mplsXCOperStatus OBJECT-TYPE The actual operational status of this cross- connect. | 1.3.6.1.3.96.1.9.1.9 | INTEGER {up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), lowerLayerDown(7)} | read-only | current |
| mplsMaxLabelStackDepth OBJECT-TYPE The maximum stack depth supported by this LSR. | 1.3.6.1.3.96.1.10 | Integer32 (1..2147483647) | read-only | current |
| mplsLabelStackIndexNext OBJECT-TYPE This object contains an appropriate value to be used for mplsLabelStackIndex when creating entries in the mplsLabelStackTable. The value 0 indicates that no unassigned entries are available. To obtain an mplsLabelStackIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse. | 1.3.6.1.3.96.1.11 | Integer32 (0..2147483647) | read-only | current |
| mplsLabelStackTable OBJECT-TYPE This table specifies the label stack to be pushed onto a packet, beneath the top label. Entries into this table are referred to from mplsXCTable. | 1.3.6.1.3.96.1.12 | not-accessible | current | |
| mplsLabelStackEntry OBJECT-TYPE An entry in this table represents one label which is to be pushed onto an outgoing packet, beneath the top label. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signaling protocol. | 1.3.6.1.3.96.1.12.1 | not-accessible | current | |
| mplsLabelStackIndex OBJECT-TYPE Primary index for this row identifying a stack of labels to be pushed on an outgoing packet, beneath the top label. | 1.3.6.1.3.96.1.12.1.1 | Integer32 (1..2147483647) | not-accessible | current |
| mplsLabelStackLabelIndex OBJECT-TYPE Secondary index for this row identifying one label of the stack. Note that an entry with a smaller mplsLabelStackLabelIndex would refer to a label higher up the label stack and would be popped at a downstream LSR before a label represented by a higher mplsLabelStackLabelIndex at a downstream LSR. | 1.3.6.1.3.96.1.12.1.2 | Integer32 (1..2147483647) | not-accessible | current |
| mplsLabelStackLabel OBJECT-TYPE The label to pushed. | 1.3.6.1.3.96.1.12.1.3 | MplsLabel | read-create | current |
| mplsLabelStackRowStatus OBJECT-TYPE For creating, modifying, and deleting this row. | 1.3.6.1.3.96.1.12.1.4 | RowStatus | read-create | current |
| mplsLabelStackStorageType OBJECT-TYPE Defines the storage type for this object. | 1.3.6.1.3.96.1.12.1.5 | StorageType | read-create | current |
| mplsTrafficParamIndexNext OBJECT-TYPE This object contains an appropriate value which will be used for mplsTrafficParamIndex when creating entries in the mplsTrafficParamTable. The value 0 indicates that no unassigned entries are available. To obtain the mplsTrafficParamIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse. | 1.3.6.1.3.96.1.13 | Integer32 (0..2147483647) | read-only | current |
| mplsTrafficParamTable OBJECT-TYPE This table specifies the Traffic Parameter objects for in and out-segments. | 1.3.6.1.3.96.1.14 | not-accessible | current | |
| mplsTrafficParamEntry OBJECT-TYPE An entry in this table represents the TrafficParam objects for one or more in or out segments. A single entry can be pointed to by multiple segments indicating resource sharing. | 1.3.6.1.3.96.1.14.1 | not-accessible | current | |
| mplsTrafficParamIndex OBJECT-TYPE Uniquely identifies this row of the table. Note that zero represents an invalid index. | 1.3.6.1.3.96.1.14.1.1 | Integer32 (1..2147483647) | not-accessible | current |
| mplsTrafficParamMaxRate OBJECT-TYPE Maximum rate in kilobits/second. | 1.3.6.1.3.96.1.14.1.2 | MplsBitRate | read-create | current |
| mplsTrafficParamMeanRate OBJECT-TYPE Mean rate in kilobits/second. | 1.3.6.1.3.96.1.14.1.3 | MplsBitRate | read-create | current |
| mplsTrafficParamMaxBurstSize OBJECT-TYPE Maximum burst size in bytes. | 1.3.6.1.3.96.1.14.1.4 | MplsBurstSize | read-create | current |
| mplsTrafficParamRowStatus OBJECT-TYPE For creating, modifying, and deleting this row. | 1.3.6.1.3.96.1.14.1.5 | RowStatus | read-create | current |
| mplsTrafficParamStorageType OBJECT-TYPE The storage type for this object. | 1.3.6.1.3.96.1.14.1.6 | StorageType | read-create | current |
| mplsInSegmentTrapEnable OBJECT-TYPE If this object is true, then it enables the generation of mplsInSegmentUp and mplsInSegmentDown traps, otherwise these traps are not emitted. | 1.3.6.1.3.96.1.15 | TruthValue | read-write | current |
| mplsOutSegmentTrapEnable OBJECT-TYPE If this object is true, then it enables the generation of mplsOutSegmentUp and mplsOutSegmentDown traps, otherwise these traps are not emitted. | 1.3.6.1.3.96.1.16 | TruthValue | read-write | current |
| mplsXCTrapEnable OBJECT-TYPE If this object is true, then it enables the generation of mplsXCUp and mplsXCDown traps, otherwise these traps are not emitted. | 1.3.6.1.3.96.1.17 | TruthValue | read-write | current |
| mplsLsrNotifications OBJECT-IDENTITY | 1.3.6.1.3.96.2 | |||
| mplsLsrConformance OBJECT-IDENTITY | 1.3.6.1.3.96.3 | |||
| mplsLsrGroups OBJECT-IDENTITY | 1.3.6.1.3.96.3.1 | |||
| mplsLsrCompliances OBJECT-IDENTITY | 1.3.6.1.3.96.3.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| mplsInSegmentUp NOTIFICATION-TYPE This notification is generated when a mplsInSegmentOperStatus object for one of the configured in-segments is about to leave the down state and transition into some other state (but not into the notPresent state). This other state is indicated by the included value of mplsInSegmentOperStatus. | 1.3.6.1.3.96.2.1 | current |
| mplsInSegmentDown NOTIFICATION-TYPE This notification is generated when a mplsInSegmentOperStatus object for one of the configured in-segments is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of mplsInSegmentOperStatus. | 1.3.6.1.3.96.2.2 | current |
| mplsOutSegmentUp NOTIFICATION-TYPE This notification is generated when a mplsOutSegmentOperStatus object for one of the configured out-segments is about to leave the down state and transition into some other state (but not into the notPresent state). This other state is indicated by the included value of mplsOutSegmentOperStatus. | 1.3.6.1.3.96.2.3 | current |
| mplsOutSegmentDown NOTIFICATION-TYPE This notification is generated when a mplsOutSegmentOperStatus object for one of the configured out-segments is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of mplsOutSegmentOperStatus. | 1.3.6.1.3.96.2.4 | current |
| mplsXCUp NOTIFICATION-TYPE This notification is generated when a mplsXCOperStatus object for one of the configured cross-connect entries is about to leave the down state and transition into some other state (but not into the notPresent state). This other state is indicated by the included value of mplsXCOperStatus. | 1.3.6.1.3.96.2.5 | current |
| mplsXCDown NOTIFICATION-TYPE This notification is generated when a mplsXCOperStatus object for one of the configured cross-connect entries is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of mplsXCOperStatus. | 1.3.6.1.3.96.2.6 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| mplsInterfaceGroup OBJECT-GROUP Collection of objects needed for MPLS interface configuration and performance information. | 1.3.6.1.3.96.3.1.1 | current |
| mplsInSegmentGroup OBJECT-GROUP Collection of objects needed to implement an in- segment. | 1.3.6.1.3.96.3.1.2 | current |
| mplsOutSegmentGroup OBJECT-GROUP Collection of objects needed to implement an out- segment. | 1.3.6.1.3.96.3.1.3 | current |
| mplsXCGroup OBJECT-GROUP Collection of objects needed to implement a cross-connect entry. | 1.3.6.1.3.96.3.1.4 | current |
| mplsPerfGroup OBJECT-GROUP Collection of objects providing performance information about an LSR. | 1.3.6.1.3.96.3.1.5 | current |
| mplsHCInSegmentPerfGroup OBJECT-GROUP Object(s) providing performance information specific to out-segments for which the object mplsInterfaceInOctets wraps around too quickly. | 1.3.6.1.3.96.3.1.6 | current |
| mplsHCOutSegmentPerfGroup OBJECT-GROUP Object(s) providing performance information specific to out-segments for which the object mplsInterfaceOutOctets wraps around too quickly. | 1.3.6.1.3.96.3.1.7 | current |
| mplsTrafficParamGroup OBJECT-GROUP Object(s) required for supporting QoS resource reservation. | 1.3.6.1.3.96.3.1.8 | current |
| mplsXCIsPersistentGroup OBJECT-GROUP Objects needed to support persistent cross- connects. | 1.3.6.1.3.96.3.1.9 | current |
| mplsXCIsNotPersistentGroup OBJECT-GROUP Objects needed to support non-persistent cross- connects. | 1.3.6.1.3.96.3.1.10 | current |
| mplsLabelStackGroup OBJECT-GROUP Objects needed to support label stacking. | 1.3.6.1.3.96.3.1.11 | current |
| mplsSegmentDiscontinuityGroup OBJECT-GROUP A collection of objects providing information specific to segment discontinuities.. | 1.3.6.1.3.96.3.1.12 | current |
| mplsLsrNotificationGroup NOTIFICATION-GROUP Set of notifications implemented in this module. None is mandatory. | 1.3.6.1.3.96.3.1.13 | current |
| mplsLsrModuleCompliance MODULE-COMPLIANCE Compliance statement for agents that support the MPLS LSR MIB. | 1.3.6.1.3.96.3.2.1 | current |