MIBs Depot

MOXA-EDSP510A8POE-MIB

Registered at
1.3.6.1.4.1.8691
Last updated
2017-01-16 00:00
Organization
Moxa Inc.
Revisions
2017-01-16 00:00, 2015-06-30 00:00, 2013-01-08 00:00, 2012-12-19 00:00
Namespace
moxa
Source file
MOXA-EDSP510A8POE-MIB
Digest
sha256:8af3b39814641697d3eb1d06f5829bdcf1ba02946c38bf95ef2055026d0e664a

Description

The MIB module for Moxa EDSP510A-8PoE series specific information.

Contact

Postal: Moxa Inc. Fl.4, No.135,Lane 235,Pao-Chiao Rd. Shing Tien City,Taipei,Taiwan,R.O.C Tel: +866-2-89191230

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIIpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso
SNMPv2-TCDateAndTime, DisplayString, MacAddress, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

MOXA-EDSP510A8POE-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Under this module's arcs

Where the registration tree carries on below this module.

ArcNameModule
1.3.6.1.4.1.8691.7industrialEthernet

Textual conventions

NameOIDSyntaxAccessStatus
PortList
TEXTUAL-CONVENTION
Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
current

Objects

NameOIDSyntaxAccessStatus
moxa
OBJECT-IDENTITY
1.3.6.1.4.1.8691
industrialEthernet
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7
mibNotificationsPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.0
swMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1
numberOfPorts
OBJECT-TYPE
Total Ports.
1.3.6.1.4.1.8691.7.86.1.1INTEGERread-onlycurrent
switchModel
OBJECT-TYPE
The switch model.
1.3.6.1.4.1.8691.7.86.1.2DisplayStringread-onlycurrent
firmwareVersion
OBJECT-TYPE
The firmware version.
1.3.6.1.4.1.8691.7.86.1.4DisplayStringread-onlycurrent
enableWebConfig
OBJECT-TYPE
This enable the Web. configuration function.
1.3.6.1.4.1.8691.7.86.1.5INTEGER {disable(0), httpOrHttps(1), httpsOnly(2)}read-writecurrent
enableTelnetConsole
OBJECT-TYPE
This enable telnet console.
1.3.6.1.4.1.8691.7.86.1.6INTEGER {disable(0), enable(1)}read-writecurrent
lineSwapRecovery
OBJECT-TYPE
This enable line-swap-fast-recovery function.
1.3.6.1.4.1.8691.7.86.1.7INTEGER {disable(0), enable(1)}read-writecurrent
networkSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.8
switchIpAddr
OBJECT-TYPE
The IP Address of this switch.
1.3.6.1.4.1.8691.7.86.1.8.1IpAddressread-onlycurrent
switchIpMask
OBJECT-TYPE
The netmask of this switch.
1.3.6.1.4.1.8691.7.86.1.8.2IpAddressread-onlycurrent
defaultGateway
OBJECT-TYPE
The default gateway of this switch.
1.3.6.1.4.1.8691.7.86.1.8.3IpAddressread-onlycurrent
enableAutoIpConfig
OBJECT-TYPE
This enable the automatic IP address configuration function.
1.3.6.1.4.1.8691.7.86.1.8.4INTEGER {disable(0), enableDHCP(1), enableBOOTP(2)}read-writecurrent
dnsServer1IpAddr
OBJECT-TYPE
The first DNS server's IP address
1.3.6.1.4.1.8691.7.86.1.8.5IpAddressread-writecurrent
snmpTrapCommunity
OBJECT-TYPE
The SNMP trap community name
1.3.6.1.4.1.8691.7.86.1.8.6DisplayStringread-writecurrent
trapServerAddr
OBJECT-TYPE
The IP address/Domain name of SNMP trap server
1.3.6.1.4.1.8691.7.86.1.8.7DisplayStringread-writecurrent
dnsServer2IpAddr
OBJECT-TYPE
The second DNS server's IP address
1.3.6.1.4.1.8691.7.86.1.8.8IpAddressread-writecurrent
snmpReadCommunity
OBJECT-TYPE
The SNMP read community name
1.3.6.1.4.1.8691.7.86.1.8.9DisplayStringread-writecurrent
snmpTrap2Community
OBJECT-TYPE
The Second SNMP trap community name
1.3.6.1.4.1.8691.7.86.1.8.11DisplayStringread-writecurrent
trap2ServerAddr
OBJECT-TYPE
The IP address/Domain name of Second SNMP trap server
1.3.6.1.4.1.8691.7.86.1.8.12DisplayStringread-writecurrent
snmpInformEnable
OBJECT-TYPE
This enable the snmpInform function.
1.3.6.1.4.1.8691.7.86.1.8.13INTEGER {disable(0), enable(1)}read-writecurrent
snmpInformRetries
OBJECT-TYPE
The snmp inform retry times of SNMP trap server
1.3.6.1.4.1.8691.7.86.1.8.14INTEGER (1..99)read-writecurrent
snmpInformTimeout
OBJECT-TYPE
The snmp inform interval of SNMP trap server
1.3.6.1.4.1.8691.7.86.1.8.15INTEGER (1..300)read-writecurrent
dhcpRetryPeriods
OBJECT-TYPE
The DHCP retry periods.
1.3.6.1.4.1.8691.7.86.1.8.16INTEGERread-writecurrent
dhcpRetryTimes
OBJECT-TYPE
The dhcp retry times.
1.3.6.1.4.1.8691.7.86.1.8.17INTEGERread-writecurrent
portSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.9
portTable
OBJECT-TYPE
The port table.
1.3.6.1.4.1.8691.7.86.1.9.1not-accessiblecurrent
portEntry
OBJECT-TYPE
The port entry.
1.3.6.1.4.1.8691.7.86.1.9.1.1not-accessiblecurrent
portIndex
OBJECT-TYPE
The port index.
1.3.6.1.4.1.8691.7.86.1.9.1.1.1INTEGERread-onlycurrent
portDesc
OBJECT-TYPE
The port description
1.3.6.1.4.1.8691.7.86.1.9.1.1.2DisplayStringread-onlycurrent
portEnable
OBJECT-TYPE
This enable the port.
1.3.6.1.4.1.8691.7.86.1.9.1.1.3INTEGER {disable(0), enable(1)}read-writecurrent
portSpeed
OBJECT-TYPE
The port speed and duplex.
1.3.6.1.4.1.8691.7.86.1.9.1.1.4INTEGER {auto(0), speed100M-Full(1), speed100M-Half(2), speed10M-Full(3), speed10M-Half(4), speed1000M-Full(5)}read-writecurrent
portMDI
OBJECT-TYPE
The port MDI/MDIX.
1.3.6.1.4.1.8691.7.86.1.9.1.1.5INTEGER {na(0), auto(1), mdi(2), mdiX(3)}read-writecurrent
portFDXFlowCtrl
OBJECT-TYPE
The port FDX Flow Control
1.3.6.1.4.1.8691.7.86.1.9.1.1.6INTEGER {disable(0), enable(1)}read-writecurrent
portName
OBJECT-TYPE
The port Name
1.3.6.1.4.1.8691.7.86.1.9.1.1.7DisplayStringread-writecurrent
monitor
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.10
power1InputStatus
OBJECT-TYPE
The status of the first power input.
1.3.6.1.4.1.8691.7.86.1.10.1INTEGER {not-present(0), present(1)}read-onlycurrent
power2InputStatus
OBJECT-TYPE
The status of the second power input.
1.3.6.1.4.1.8691.7.86.1.10.2INTEGER {not-present(0), present(1)}read-onlycurrent
monitorPortTable
OBJECT-TYPE
The port table of monitor function.
1.3.6.1.4.1.8691.7.86.1.10.3not-accessiblecurrent
monitorPortEntry
OBJECT-TYPE
The port table entry of monitor function.
1.3.6.1.4.1.8691.7.86.1.10.3.1not-accessiblecurrent
monitorLinkStatus
OBJECT-TYPE
The port link status.
1.3.6.1.4.1.8691.7.86.1.10.3.1.2INTEGER {disable(-1), off(0), on(1)}read-onlycurrent
monitorSpeed
OBJECT-TYPE
The port speed and duplex status.
1.3.6.1.4.1.8691.7.86.1.10.3.1.3INTEGER {na(-1), speed10M-Half(0), speed10M-Full(1), speed100M-Half(2), speed100M-Full(3), speed1000M-Half(4), speed1000M-Full(5)}read-onlycurrent
monitorAutoMDI
OBJECT-TYPE
The port MDI/MDIX status.
1.3.6.1.4.1.8691.7.86.1.10.3.1.4INTEGER {na(-1), mdi(0), mdiX(1)}read-onlycurrent
monitorTraffic
OBJECT-TYPE
The traffic loading percentage of port.
1.3.6.1.4.1.8691.7.86.1.10.3.1.5INTEGERread-onlycurrent
monitorFDXFlowCtrl
OBJECT-TYPE
The Full-Duplex flow control status
1.3.6.1.4.1.8691.7.86.1.10.3.1.6INTEGER {off(0), on(1)}read-onlycurrent
monitorTxTraffic
OBJECT-TYPE
The TX traffic loading percentage of port.
1.3.6.1.4.1.8691.7.86.1.10.3.1.7INTEGERread-onlycurrent
monitorRxTraffic
OBJECT-TYPE
The RTX traffic loading percentage of port.
1.3.6.1.4.1.8691.7.86.1.10.3.1.8INTEGERread-onlycurrent
monitorDiTable
OBJECT-TYPE
The DI table of monitor function.
1.3.6.1.4.1.8691.7.86.1.10.4not-accessiblecurrent
monitorDiEntry
OBJECT-TYPE
The DI table entry of monitor function.
1.3.6.1.4.1.8691.7.86.1.10.4.1not-accessiblecurrent
diIndex
OBJECT-TYPE
The DI index of monitor function
1.3.6.1.4.1.8691.7.86.1.10.4.1.1INTEGER (1..2)read-onlycurrent
diInputStatus
OBJECT-TYPE
The DI input status.
1.3.6.1.4.1.8691.7.86.1.10.4.1.2INTEGER {off(0), on(1)}read-onlycurrent
monitorSFPTable
OBJECT-TYPE
The SFP table of monitor function.
1.3.6.1.4.1.8691.7.86.1.10.7not-accessiblecurrent
monitorSFPEntry
OBJECT-TYPE
The SFP table entry of monitor function.
1.3.6.1.4.1.8691.7.86.1.10.7.1not-accessiblecurrent
sfpPort
OBJECT-TYPE
The SPF index of monitor function
1.3.6.1.4.1.8691.7.86.1.10.7.1.1DisplayStringread-onlycurrent
sfpModelName
OBJECT-TYPE
The SPF ModelName of monitor function
1.3.6.1.4.1.8691.7.86.1.10.7.1.2DisplayStringread-onlycurrent
sfpTemperature
OBJECT-TYPE
The SPF Temperature of monitor function
1.3.6.1.4.1.8691.7.86.1.10.7.1.3DisplayStringread-onlycurrent
sfpVoltage
OBJECT-TYPE
The SPF Voltage of monitor function
1.3.6.1.4.1.8691.7.86.1.10.7.1.4DisplayStringread-onlycurrent
sfpTxPower
OBJECT-TYPE
The SPF TX power of monitor function
1.3.6.1.4.1.8691.7.86.1.10.7.1.5DisplayStringread-onlycurrent
sfpRXPower
OBJECT-TYPE
The SPF RX power of monitor function
1.3.6.1.4.1.8691.7.86.1.10.7.1.6DisplayStringread-onlycurrent
emailWarning
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.11
emailService
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.11.1
emailWarningMailServer
OBJECT-TYPE
The email server's Ip Address/Domain name of email warning function.
1.3.6.1.4.1.8691.7.86.1.11.1.1DisplayStringread-writecurrent
emailWarningFirstEmailAddr
OBJECT-TYPE
The first email address of email warning function.
1.3.6.1.4.1.8691.7.86.1.11.1.2DisplayStringread-writecurrent
emailWarningSecondEmailAddr
OBJECT-TYPE
The second email address of email warning function.
1.3.6.1.4.1.8691.7.86.1.11.1.3DisplayStringread-writecurrent
emailWarningThirdEmailAddr
OBJECT-TYPE
The third email address of email warning function.
1.3.6.1.4.1.8691.7.86.1.11.1.4DisplayStringread-writecurrent
emailWarningFourthEmailAddr
OBJECT-TYPE
The fourth email address of email warning function.
1.3.6.1.4.1.8691.7.86.1.11.1.5DisplayStringread-writecurrent
emailWarningSMTPPort
OBJECT-TYPE
The email server's SMTP port of email warning function.
1.3.6.1.4.1.8691.7.86.1.11.1.6INTEGER (1..65536)read-writecurrent
emailWarningEventType
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.11.2
emailWarningEventServerColdStart
OBJECT-TYPE
The switch cold start event of email warning function.
1.3.6.1.4.1.8691.7.86.1.11.2.1INTEGER {disable(0), enable(1)}read-writecurrent
emailWarningEventServerWarmStart
OBJECT-TYPE
The switch warm start event of email warning function.
1.3.6.1.4.1.8691.7.86.1.11.2.2INTEGER {disable(0), enable(1)}read-writecurrent
emailWarningEventConfigChange
OBJECT-TYPE
The configuration changed event of email warning function.
1.3.6.1.4.1.8691.7.86.1.11.2.3INTEGER {disable(0), enable(1)}read-writecurrent
emailWarningEventPowerOn2Off
OBJECT-TYPE
The power on event of email warning function.
1.3.6.1.4.1.8691.7.86.1.11.2.4INTEGER {disable(0), enable(1)}read-writecurrent
emailWarningEventPowerOff2On
OBJECT-TYPE
The power off event of email warning function.
1.3.6.1.4.1.8691.7.86.1.11.2.5INTEGER {disable(0), enable(1)}read-writecurrent
emailWarningEventAuthFail
OBJECT-TYPE
The authentication fail event of email warning function.
1.3.6.1.4.1.8691.7.86.1.11.2.6INTEGER {disable(0), enable(1)}read-writecurrent
emailWarningEventTopologyChanged
OBJECT-TYPE
The communication redundancy topology changed event of email warning function.
1.3.6.1.4.1.8691.7.86.1.11.2.7INTEGER {disable(0), enable(1)}read-writecurrent
emailWarningEventPortTable
OBJECT-TYPE
The port table of the email warning event.
1.3.6.1.4.1.8691.7.86.1.11.3not-accessiblecurrent
emailWarningEventPortEntry
OBJECT-TYPE
The port table entry of the email warning event.
1.3.6.1.4.1.8691.7.86.1.11.3.1not-accessiblecurrent
emailWarningEventPortLinkOn
OBJECT-TYPE
The port link on event of email warning function.
1.3.6.1.4.1.8691.7.86.1.11.3.1.2INTEGER {disable(0), enable(1)}read-writecurrent
emailWarningEventPortLinkOff
OBJECT-TYPE
The port link off event of email warning function.
1.3.6.1.4.1.8691.7.86.1.11.3.1.3INTEGER {disable(0), enable(1)}read-writecurrent
emailWarningEventPortTrafficOverload
OBJECT-TYPE
The port's traffic overloading event of email warning function.
1.3.6.1.4.1.8691.7.86.1.11.3.1.4INTEGER {disable(0), enable(1)}read-writecurrent
emailWarningEventPortRxTrafficThreshold
OBJECT-TYPE
The port's traffic threshold of the overloading event.
1.3.6.1.4.1.8691.7.86.1.11.3.1.5INTEGERread-writecurrent
emailWarningEventPortTrafficDuration
OBJECT-TYPE
The port's traffic duration of the overloading event.
1.3.6.1.4.1.8691.7.86.1.11.3.1.6INTEGERread-writecurrent
emailWarningEventDiTable
OBJECT-TYPE
The DI table of the email warning event.
1.3.6.1.4.1.8691.7.86.1.11.4not-accessiblecurrent
emailWarningEventDiEntry
OBJECT-TYPE
The DI table entry of the email warning event.
1.3.6.1.4.1.8691.7.86.1.11.4.1not-accessiblecurrent
emailWarningEventDiInputOn2Off
OBJECT-TYPE
The DI input off event of email warning function .
1.3.6.1.4.1.8691.7.86.1.11.4.1.1INTEGER {disable(0), enable(1)}read-writecurrent
emailWarningEventDiInputOff2On
OBJECT-TYPE
The DI input on event of email warning function.
1.3.6.1.4.1.8691.7.86.1.11.4.1.2INTEGER {disable(0), enable(1)}read-writecurrent
setDeviceIp
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.12
setDevIpTable
OBJECT-TYPE
The set device IP table.
1.3.6.1.4.1.8691.7.86.1.12.1not-accessiblecurrent
setDevIpEntry
OBJECT-TYPE
The set device IP table entry.
1.3.6.1.4.1.8691.7.86.1.12.1.1not-accessiblecurrent
setDevIpIndex
OBJECT-TYPE
The set device IP index.
1.3.6.1.4.1.8691.7.86.1.12.1.1.1INTEGERread-onlycurrent
setDevIpCurrentIpofDevice
OBJECT-TYPE
The current IP address of connected to this port.
1.3.6.1.4.1.8691.7.86.1.12.1.1.2DisplayStringread-onlycurrent
setDevIpPresentBy
OBJECT-TYPE
The protocol used that assigning IP to the device.
1.3.6.1.4.1.8691.7.86.1.12.1.1.3INTEGER {no(0), dhcpClient(1), rarp(2), bootp(4)}read-onlycurrent
setDevIpDedicatedIp
OBJECT-TYPE
The IP address when assign to the device connected to this port.
1.3.6.1.4.1.8691.7.86.1.12.1.1.4IpAddressread-writecurrent
mirroring
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.13
targetPort
OBJECT-TYPE
The mirrored port of mirroring function.
1.3.6.1.4.1.8691.7.86.1.13.1INTEGERread-writecurrent
mirroringPort
OBJECT-TYPE
The mirroring port of mirroring function.
1.3.6.1.4.1.8691.7.86.1.13.2INTEGERread-writecurrent
monitorDirection
OBJECT-TYPE
The traffic direction of mirroring function.
1.3.6.1.4.1.8691.7.86.1.13.3INTEGER {inputDataStream(0), outputDataStream(1), biDirectional(2)}read-writecurrent
portTrunking
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.14
trunkSettingTable
OBJECT-TYPE
Port Trunking Setting Table.
1.3.6.1.4.1.8691.7.86.1.14.1not-accessiblecurrent
trunkSettingEntry
OBJECT-TYPE
Port Trunking Setting Entry.
1.3.6.1.4.1.8691.7.86.1.14.1.1not-accessiblecurrent
trunkSettingIndex
OBJECT-TYPE
Trunking Group Index.
1.3.6.1.4.1.8691.7.86.1.14.1.1.1INTEGERread-onlycurrent
trunkType
OBJECT-TYPE
Trunking Group Type.
1.3.6.1.4.1.8691.7.86.1.14.1.1.2INTEGER {static(1), lacp(2)}read-writecurrent
trunkMemberPorts
OBJECT-TYPE
Trunking Group Member Ports.
1.3.6.1.4.1.8691.7.86.1.14.1.1.3PortListread-writecurrent
trunkTable
OBJECT-TYPE
Port Trunking Table.
1.3.6.1.4.1.8691.7.86.1.14.2not-accessiblecurrent
trunkEntry
OBJECT-TYPE
Port Trunking Entry.
1.3.6.1.4.1.8691.7.86.1.14.2.1not-accessiblecurrent
trunkIndex
OBJECT-TYPE
Trunking Group Index.
1.3.6.1.4.1.8691.7.86.1.14.2.1.1INTEGERread-onlycurrent
trunkPort
OBJECT-TYPE
Trunking Group Member Port.
1.3.6.1.4.1.8691.7.86.1.14.2.1.2INTEGERread-onlycurrent
trunkStatus
OBJECT-TYPE
Trunking Port Status.
1.3.6.1.4.1.8691.7.86.1.14.2.1.3INTEGER {success(1), fail(2), standby(3)}read-onlycurrent
commRedundancy
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.16
protocolOfRedundancySetup
OBJECT-TYPE
This set the redundancy protocol of this switch.
1.3.6.1.4.1.8691.7.86.1.16.1INTEGER {spanningTree(1), turboRing(2), turboRingV2(3), turboChain(4), mstp(5)}read-writecurrent
turboRing
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.16.2
turboRingMaster
OBJECT-TYPE
Is this a Master or Slave.
1.3.6.1.4.1.8691.7.86.1.16.2.1INTEGER {no(0), yes(1)}read-onlycurrent
turboRingMasterSetup
OBJECT-TYPE
Set this to be Master.
1.3.6.1.4.1.8691.7.86.1.16.2.2INTEGER {no(0), yes(1)}read-writecurrent
turboRingPortTable
OBJECT-TYPE
Turbo Ring Port Table.
1.3.6.1.4.1.8691.7.86.1.16.2.3not-accessiblecurrent
turboRingPortEntry
OBJECT-TYPE
Turbo Ring Port Entry.
1.3.6.1.4.1.8691.7.86.1.16.2.3.1not-accessiblecurrent
turboRingPortIndex
OBJECT-TYPE
Turbo Ring Port Index.
1.3.6.1.4.1.8691.7.86.1.16.2.3.1.1INTEGERread-onlycurrent
turboRingPortStatus
OBJECT-TYPE
Turbo Ring Port Status.
1.3.6.1.4.1.8691.7.86.1.16.2.3.1.2INTEGER {portDisabled(0), notTurboRingPort(1), linkDown(2), blocked(3), learning(4), forwarding(5)}read-onlycurrent
turboRingPortDesignatedBridge
OBJECT-TYPE
The MAC address of the bridge which this port considers to be the Designated Bridge for this port's segment.
1.3.6.1.4.1.8691.7.86.1.16.2.3.1.3MacAddressread-onlycurrent
turboRingPortDesignatedPort
OBJECT-TYPE
The Port Number of the port on the Designated Bridge for this port's segment.
1.3.6.1.4.1.8691.7.86.1.16.2.3.1.4INTEGERread-onlycurrent
turboRingDesignatedMaster
OBJECT-TYPE
The MAC address of the bridge which is the Master of the TURBO RING.
1.3.6.1.4.1.8691.7.86.1.16.2.6MacAddressread-onlycurrent
turboRingRdntPort1
OBJECT-TYPE
The port number of 1st Redundant Port on the TURBO RING.
1.3.6.1.4.1.8691.7.86.1.16.2.7INTEGERread-writecurrent
turboRingRdntPort2
OBJECT-TYPE
The port number of 2nd Redundant Port on the TURBO RING.
1.3.6.1.4.1.8691.7.86.1.16.2.8INTEGERread-writecurrent
turboRingEnableCoupling
OBJECT-TYPE
This enable the ring coupling function.
1.3.6.1.4.1.8691.7.86.1.16.2.9INTEGER {disable(0), enable(1)}read-writecurrent
turboRingCouplingPort
OBJECT-TYPE
The coupling port of ring coupling function.
1.3.6.1.4.1.8691.7.86.1.16.2.10INTEGERread-writecurrent
turboRingCouplingPortStatus
OBJECT-TYPE
The coupling port status of ring coupling function.
1.3.6.1.4.1.8691.7.86.1.16.2.11INTEGER {portDisabled(0), notCouplingPort(1), linkDown(2), blocked(3), forwarding(5)}read-onlycurrent
turboRingControlPort
OBJECT-TYPE
The control port of ring coupling function.
1.3.6.1.4.1.8691.7.86.1.16.2.12INTEGERread-writecurrent
turboRingControlPortStatus
OBJECT-TYPE
The control port status of ring coupling function.
1.3.6.1.4.1.8691.7.86.1.16.2.13INTEGER {portDisabled(0), notControlPort(1), linkDown(2), blocked(3), forwarding(5), inactive(6), active(7)}read-onlycurrent
turboRingBrokenStatus
OBJECT-TYPE
Turbo Ring broken display.
1.3.6.1.4.1.8691.7.86.1.16.2.14INTEGER {na(0), normal(1), broken(2)}read-onlycurrent
spanningTree
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.16.3
spanningTreeRoot
OBJECT-TYPE
The root of spanning tree.
1.3.6.1.4.1.8691.7.86.1.16.3.1INTEGER {no(0), yes(1)}read-onlycurrent
spanningTreeBridgePriority
OBJECT-TYPE
The bridge priority of spanning tree protocol.
1.3.6.1.4.1.8691.7.86.1.16.3.2INTEGER {priority0(0), priority4096(4096), priority8192(8192), priority12288(12288), priority16384(16384), priority20480(20480), priority24576(24576), priority28672(28672), priority32768(32768), priority36864(36864), priority40960(40960), priority45056(45056), priority49152(49152), priority53248(53248), priority57344(57344), priority61440(61440)}read-writecurrent
spanningTreeHelloTime
OBJECT-TYPE
The hello time of spanning tree protocol.
1.3.6.1.4.1.8691.7.86.1.16.3.3INTEGERread-writecurrent
spanningTreeMaxAge
OBJECT-TYPE
The max. age of spanning tree protocol.
1.3.6.1.4.1.8691.7.86.1.16.3.4INTEGERread-writecurrent
spanningTreeForwardingDelay
OBJECT-TYPE
Tje forwarding delay of spanning tree protocol.
1.3.6.1.4.1.8691.7.86.1.16.3.5INTEGERread-writecurrent
spanningTreeTable
OBJECT-TYPE
The spanning tree table.
1.3.6.1.4.1.8691.7.86.1.16.3.6not-accessiblecurrent
spanningTreeEntry
OBJECT-TYPE
The spanning tree port entry.
1.3.6.1.4.1.8691.7.86.1.16.3.6.1not-accessiblecurrent
spanningTreeIndex
OBJECT-TYPE
The index of spanning tree table.
1.3.6.1.4.1.8691.7.86.1.16.3.6.1.1INTEGERread-onlycurrent
enableSpanningTree
OBJECT-TYPE
This enable of spanning tree protocol for this port.
1.3.6.1.4.1.8691.7.86.1.16.3.6.1.2INTEGER {disable(0), enable(1)}read-writecurrent
spanningTreePortPriority
OBJECT-TYPE
The port priority of spanning tree protocol.
1.3.6.1.4.1.8691.7.86.1.16.3.6.1.3INTEGER {priority0(0), priority16(16), priority32(32), priority48(48), priority64(64), priority80(80), priority96(96), priority112(112), priority128(128), priority144(144), priority160(160), priority176(176), priority192(192), priority208(208), priority224(224), priority240(240)}read-writecurrent
spanningTreePortCost
OBJECT-TYPE
The port cost of spanning tree protocol.
1.3.6.1.4.1.8691.7.86.1.16.3.6.1.4INTEGERread-writecurrent
spanningTreePortStatus
OBJECT-TYPE
The port status of spanning tree protocol.
1.3.6.1.4.1.8691.7.86.1.16.3.6.1.5INTEGER {portDisabled(0), notSpanningTreePort(1), linkDown(2), blocked(3), learning(4), forwarding(5)}read-onlycurrent
spanningTreePortEdge
OBJECT-TYPE
This configures the Edge Port property for this port.
1.3.6.1.4.1.8691.7.86.1.16.3.6.1.6INTEGER {auto(0), forceEdge(1), false(2)}read-writecurrent
activeProtocolOfRedundancy
OBJECT-TYPE
This shows the active redundancy protocol of this switch now. The none(0) status will be showed if only if the switch's redundancy protocol is set to spanning tree and none of ports enable spanning tree.
1.3.6.1.4.1.8691.7.86.1.16.4INTEGER {none(0), spanningTree(1), turboRing(2), turboRingV2(3), turboChain(4), mstp(5)}read-onlycurrent
turboRingV2
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.16.5
turboRingV2Ring1
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.16.5.1
ringIndexRing1
OBJECT-TYPE
The turboRingV2 Ring Index.
1.3.6.1.4.1.8691.7.86.1.16.5.1.1INTEGER (1..2)read-onlycurrent
ringEnableRing1
OBJECT-TYPE
The turboRingV2 Ring1 enable config.
1.3.6.1.4.1.8691.7.86.1.16.5.1.2INTEGER {disable(0), enable(1)}read-writecurrent
masterSetupRing1
OBJECT-TYPE
Is this a Master or Slave.
1.3.6.1.4.1.8691.7.86.1.16.5.1.3INTEGER {no(0), yes(1)}read-writecurrent
masterStatusRing1
OBJECT-TYPE
Set this to be Master.
1.3.6.1.4.1.8691.7.86.1.16.5.1.4INTEGER {no(0), yes(1)}read-onlycurrent
designatedMasterRing1
OBJECT-TYPE
The MAC address of the bridge which is the Master of the turboRingV2.
1.3.6.1.4.1.8691.7.86.1.16.5.1.5MacAddressread-onlycurrent
rdnt1stPortRing1
OBJECT-TYPE
The port number of 1st Redundant Port on the turboRingV2.
1.3.6.1.4.1.8691.7.86.1.16.5.1.6INTEGERread-writecurrent
rdnt1stPortStatusRing1
OBJECT-TYPE
The status of 1st Redundant Port on the turboRingV2.
1.3.6.1.4.1.8691.7.86.1.16.5.1.7INTEGER {disabled(0), notRedundant(1), linkdown(2), blocking(3), learning(4), forwarding(5)}read-onlycurrent
rdnt2ndPortRing1
OBJECT-TYPE
The port number of 2nd Redundant Port on the turboRingV2.
1.3.6.1.4.1.8691.7.86.1.16.5.1.8INTEGERread-writecurrent
rdnt2ndPortStatusRing1
OBJECT-TYPE
The status of 2nd Redundant Port on the turboRingV2.
1.3.6.1.4.1.8691.7.86.1.16.5.1.9INTEGER {disabled(0), notRedundant(1), linkdown(2), blocking(3), learning(4), forwarding(5)}read-onlycurrent
brokenStatusRing1
OBJECT-TYPE
turboRingV2 broken display.
1.3.6.1.4.1.8691.7.86.1.16.5.1.10INTEGER {na(0), normal(1), broken(2)}read-onlycurrent
turboRingV2Ring2
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.16.5.2
ringIndexRing2
OBJECT-TYPE
The turboRingV2 Ring Index.
1.3.6.1.4.1.8691.7.86.1.16.5.2.1INTEGER (1..2)read-onlycurrent
ringEnableRing2
OBJECT-TYPE
The turboRingV2 Ring2 enable config.
1.3.6.1.4.1.8691.7.86.1.16.5.2.2INTEGER {disable(0), enable(1)}read-writecurrent
masterSetupRing2
OBJECT-TYPE
Is this a Master or Slave.
1.3.6.1.4.1.8691.7.86.1.16.5.2.3INTEGER {no(0), yes(1)}read-writecurrent
masterStatusRing2
OBJECT-TYPE
Set this to be Master.
1.3.6.1.4.1.8691.7.86.1.16.5.2.4INTEGER {no(0), yes(1)}read-onlycurrent
designatedMasterRing2
OBJECT-TYPE
The MAC address of the bridge which is the Master of the turboRingV2.
1.3.6.1.4.1.8691.7.86.1.16.5.2.5MacAddressread-onlycurrent
rdnt1stPortRing2
OBJECT-TYPE
The port number of 1st Redundant Port on the turboRingV2.
1.3.6.1.4.1.8691.7.86.1.16.5.2.6INTEGERread-writecurrent
rdnt1stPortStatusRing2
OBJECT-TYPE
The status of 1st Redundant Port on the turboRingV2.
1.3.6.1.4.1.8691.7.86.1.16.5.2.7INTEGER {disabled(0), notRedundant(1), linkdown(2), blocking(3), learning(4), forwarding(5)}read-onlycurrent
rdnt2ndPortRing2
OBJECT-TYPE
The port number of 2nd Redundant Port on the turboRingV2.
1.3.6.1.4.1.8691.7.86.1.16.5.2.8INTEGERread-writecurrent
rdnt2ndPortStatusRing2
OBJECT-TYPE
The status of 2nd Redundant Port on the turboRingV2.
1.3.6.1.4.1.8691.7.86.1.16.5.2.9INTEGER {disabled(0), notRedundant(1), linkdown(2), blocking(3), learning(4), forwarding(5)}read-onlycurrent
brokenStatusRing2
OBJECT-TYPE
turboRingV2 broken display.
1.3.6.1.4.1.8691.7.86.1.16.5.2.10INTEGER {na(0), normal(1), broken(2)}read-onlycurrent
turboRingV2Coupling
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.16.5.3
couplingEnable
OBJECT-TYPE
Setting the ring coupling enable.
1.3.6.1.4.1.8691.7.86.1.16.5.3.1INTEGER {disable(0), enable(1)}read-writecurrent
couplingMode
OBJECT-TYPE
Setting the ring coupling mode.
1.3.6.1.4.1.8691.7.86.1.16.5.3.2INTEGER {dualHoming(1), couplingBackup(2), couplingPrimary(3)}read-writecurrent
coupling1stPort
OBJECT-TYPE
If in 'DUAL HOMING' mode, port name is 'Primary port'; if in 'COUPLING' mode, port name is 'Coupling port'
1.3.6.1.4.1.8691.7.86.1.16.5.3.3INTEGERread-writecurrent
coupling1stPortStatus
OBJECT-TYPE
The 1st coupling port status of coupling function.
1.3.6.1.4.1.8691.7.86.1.16.5.3.4INTEGER {disabled(0), notRedundant(1), linkdown(2), blocking(3), learning(4), forwarding(5)}read-onlycurrent
coupling2ndPort
OBJECT-TYPE
If in 'DUAL HOMING' mode, port name is 'Backup port'; if in 'COUPLING' mode, port name is no used.
1.3.6.1.4.1.8691.7.86.1.16.5.3.5INTEGERread-writecurrent
coupling2ndPortStatus
OBJECT-TYPE
The 2nd coupling port status of coupling function.
1.3.6.1.4.1.8691.7.86.1.16.5.3.6INTEGER {disabled(0), notRedundant(1), linkdown(2), blocking(3), learning(4), forwarding(5)}read-onlycurrent
turboChain
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.16.6
turboChainRole
OBJECT-TYPE
The Role of TURBO CHAIN.
1.3.6.1.4.1.8691.7.86.1.16.6.1INTEGER {head(1), member(2), tail(3)}read-writecurrent
turboChainPort1
OBJECT-TYPE
The port number of 1st Redundant Port on the TURBO CHAIN. If switch role is Turbo Chain Head, this is Head port, If Switch role is Turbo Chain Tail, this is Tail port.
1.3.6.1.4.1.8691.7.86.1.16.6.2INTEGERread-writecurrent
turboChainPort2
OBJECT-TYPE
The port number of 2nd Redundant Port on the TURBO CHAIN. It is the member port of TurboChain
1.3.6.1.4.1.8691.7.86.1.16.6.3INTEGERread-writecurrent
turboChainPort1Status
OBJECT-TYPE
Turbo Chain Port Status.
1.3.6.1.4.1.8691.7.86.1.16.6.4INTEGER {notTurboChainPort(0), linkDown(1), blocking(2), blocked(3), forwarding(4), na(5)}read-onlycurrent
turboChainPort2Status
OBJECT-TYPE
Turbo Chain Port Status.
1.3.6.1.4.1.8691.7.86.1.16.6.5INTEGER {notTurboChainPort(0), linkDown(1), blocking(2), blocked(3), forwarding(4), na(5)}read-onlycurrent
turboChainPort1PartnerBridge
OBJECT-TYPE
The MAC address of the next bridge
1.3.6.1.4.1.8691.7.86.1.16.6.6MacAddressread-onlycurrent
turboChainPort2PartnerBridge
OBJECT-TYPE
The MAC address of the neighbor Turbo Chain switch
1.3.6.1.4.1.8691.7.86.1.16.6.7MacAddressread-onlycurrent
relayWarning
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.17
relayWarningTable
OBJECT-TYPE
The relay warning table.
1.3.6.1.4.1.8691.7.86.1.17.11not-accessiblecurrent
relayWarningEntry
OBJECT-TYPE
Relay Warning Entry.
1.3.6.1.4.1.8691.7.86.1.17.11.1not-accessiblecurrent
relayAlarmIndex
OBJECT-TYPE
The Relay alarm index.
1.3.6.1.4.1.8691.7.86.1.17.11.1.1INTEGERread-onlycurrent
relayWarningRelayContact
OBJECT-TYPE
The first Relay contact status.
1.3.6.1.4.1.8691.7.86.1.17.11.1.2INTEGER {closed(0), opened(1)}read-onlycurrent
overrideRelayWarningSetting
OBJECT-TYPE
Override the relay warning setting.
1.3.6.1.4.1.8691.7.86.1.17.11.1.3INTEGER {no(0), yes(1)}read-writecurrent
relayWarningPower1Off
OBJECT-TYPE
The relay contact will be opened while the first power input off.
1.3.6.1.4.1.8691.7.86.1.17.11.1.4INTEGER {disable(0), enable(1)}read-writecurrent
relayWarningPower1OffStatus
OBJECT-TYPE
The relay contact is opened as the first power input off..
1.3.6.1.4.1.8691.7.86.1.17.11.1.5INTEGER {not-triggered(0), triggered(1)}read-onlycurrent
relayWarningPower2Off
OBJECT-TYPE
The relay contact will be opened while the second power input off.
1.3.6.1.4.1.8691.7.86.1.17.11.1.6INTEGER {disable(0), enable(1)}read-writecurrent
relayWarningPower2OffStatus
OBJECT-TYPE
The relay contact is opened as the second power input off.
1.3.6.1.4.1.8691.7.86.1.17.11.1.7INTEGER {not-triggered(0), triggered(1)}read-onlycurrent
relayWarningTurboRingBreak
OBJECT-TYPE
The relay contact will be opened while turbo ring break.
1.3.6.1.4.1.8691.7.86.1.17.11.1.8INTEGER {disable(0), enable(1)}read-writecurrent
relayWarningTurboRingBreakStatus
OBJECT-TYPE
The relay contact is opened while turbo ring is broken.
1.3.6.1.4.1.8691.7.86.1.17.11.1.9INTEGER {not-triggered(0), triggered(1)}read-onlycurrent
portRelayWarningTable
OBJECT-TYPE
The relay warning port table.
1.3.6.1.4.1.8691.7.86.1.17.12not-accessiblecurrent
portRelayWarningEntry
OBJECT-TYPE
Port Relay Warning Entry.
1.3.6.1.4.1.8691.7.86.1.17.12.1not-accessiblecurrent
relayWarningLinkChanged
OBJECT-TYPE
The relay contact will be opened while this port's link status is changed.
1.3.6.1.4.1.8691.7.86.1.17.12.1.1INTEGER {ignore(0), on2off(1), off2on(2)}read-writecurrent
relayWarningLinkChangedStatus
OBJECT-TYPE
The relay contact is opened as this port's link status is changed.
1.3.6.1.4.1.8691.7.86.1.17.12.1.2INTEGER {not-triggered(0), triggered(1)}read-onlycurrent
relayWarningTrafficOverload
OBJECT-TYPE
The relay contact will be opened while this port's traffic is overload.
1.3.6.1.4.1.8691.7.86.1.17.12.1.3INTEGER {disable(0), enable(1)}read-writecurrent
relayWarningTrafficOverloadStatus
OBJECT-TYPE
The relay contact is opened as this port's traffic is overload.
1.3.6.1.4.1.8691.7.86.1.17.12.1.4INTEGER {not-triggered(0), triggered(1)}read-onlycurrent
relayWarningRxTrafficThreshold
OBJECT-TYPE
The threshold of the port traffic will be over loading.
1.3.6.1.4.1.8691.7.86.1.17.12.1.5INTEGERread-writecurrent
relayWarningTrafficDuration
OBJECT-TYPE
The duration of the port traffic will be over loading.
1.3.6.1.4.1.8691.7.86.1.17.12.1.6INTEGERread-writecurrent
diRelayWarningTable
OBJECT-TYPE
The relay warning DI table.
1.3.6.1.4.1.8691.7.86.1.17.13not-accessiblecurrent
diRelayWarningEntry
OBJECT-TYPE
DI Relay Warning Entry.
1.3.6.1.4.1.8691.7.86.1.17.13.1not-accessiblecurrent
relayWarningDiInputChanged
OBJECT-TYPE
The relay contact will be opened while the DI input changed.
1.3.6.1.4.1.8691.7.86.1.17.13.1.1INTEGER {disable(0), off(1), on(2)}read-writecurrent
relayWarningDiInputChangedStatus
OBJECT-TYPE
The relay contact is opened as the first DI input changed..
1.3.6.1.4.1.8691.7.86.1.17.13.1.2INTEGER {not-triggered(0), triggered(1)}read-onlycurrent
trafficPrioritization
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.18
qosClassification
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.18.1
queuingMechanism
OBJECT-TYPE
The queuing mechanism.
1.3.6.1.4.1.8691.7.86.1.18.1.1INTEGER {schedweightfair(0), schedstrict(1)}read-writecurrent
qosPortTable
OBJECT-TYPE
The QoS port table.
1.3.6.1.4.1.8691.7.86.1.18.1.2not-accessiblecurrent
qosPortEntry
OBJECT-TYPE
The QoS Port Entry.
1.3.6.1.4.1.8691.7.86.1.18.1.2.1not-accessiblecurrent
inspectTos
OBJECT-TYPE
This enable the inspection of TOS field.
1.3.6.1.4.1.8691.7.86.1.18.1.2.1.1INTEGER {no(0), yes(1)}read-writecurrent
inspectCos
OBJECT-TYPE
This enable the inspection of CoS field.
1.3.6.1.4.1.8691.7.86.1.18.1.2.1.2INTEGER {no(0), yes(1)}read-writecurrent
portPriority
OBJECT-TYPE
The default priority of the port.
1.3.6.1.4.1.8691.7.86.1.18.1.2.1.3INTEGER {priority0(0), priority1(1), priority2(2), priority3(3), priority4(4), priority5(5), priority6(6), priority7(7)}read-writecurrent
cosMapping
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.18.2
cosMappingTable
OBJECT-TYPE
The COS mapping table.
1.3.6.1.4.1.8691.7.86.1.18.2.1not-accessiblecurrent
cosMappingEntry
OBJECT-TYPE
The COS mapping Entry.
1.3.6.1.4.1.8691.7.86.1.18.2.1.1not-accessiblecurrent
cosTag
OBJECT-TYPE
The cos tag of TOS field.
1.3.6.1.4.1.8691.7.86.1.18.2.1.1.1INTEGER (0..7)read-onlycurrent
cosMappedPriority
OBJECT-TYPE
The frame's priority corresponding to it's COS tag value.
1.3.6.1.4.1.8691.7.86.1.18.2.1.1.2INTEGER {low(0), normal(1), medium(2), high(3)}read-writecurrent
tosMapping
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.18.3
tosMappingTable
OBJECT-TYPE
The TOS mapping table.
1.3.6.1.4.1.8691.7.86.1.18.3.1not-accessiblecurrent
tosMappingEntry
OBJECT-TYPE
TOS mapping Entry.
1.3.6.1.4.1.8691.7.86.1.18.3.1.1not-accessiblecurrent
tosClass
OBJECT-TYPE
The TOS class of TOS field.
1.3.6.1.4.1.8691.7.86.1.18.3.1.1.1INTEGERread-onlycurrent
tosMappedPriority
OBJECT-TYPE
The frame's priority corresponding to it's TOS class value.
1.3.6.1.4.1.8691.7.86.1.18.3.1.1.2INTEGER {low(0), normal(1), medium(2), high(3)}read-writecurrent
vlan
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.19
vlanPortSettingTable
OBJECT-TYPE
The vlan setting table of ports.
1.3.6.1.4.1.8691.7.86.1.19.1not-accessiblecurrent
vlanPortSettingEntry
OBJECT-TYPE
Port Setting Entry of VLAN.
1.3.6.1.4.1.8691.7.86.1.19.1.1not-accessiblecurrent
portVlanType
OBJECT-TYPE
The vlan type of port.
1.3.6.1.4.1.8691.7.86.1.19.1.1.1INTEGER {access(0), trunk(1), hybrid(2)}read-writecurrent
portDefaultVid
OBJECT-TYPE
The PVID of port.
1.3.6.1.4.1.8691.7.86.1.19.1.1.2INTEGER (1..4094)read-writecurrent
portFixedVid
OBJECT-TYPE
The fixed vids of (trunk) port.
1.3.6.1.4.1.8691.7.86.1.19.1.1.3DisplayStringread-writecurrent
portForbiddenVid
OBJECT-TYPE
The forbidden vids of (trunk)port.
1.3.6.1.4.1.8691.7.86.1.19.1.1.4DisplayStringread-writecurrent
portFixedVidUntag
OBJECT-TYPE
The fixed untag vids of (trunk) port.
1.3.6.1.4.1.8691.7.86.1.19.1.1.5DisplayStringread-writecurrent
vlanTable
OBJECT-TYPE
The VLAN table.
1.3.6.1.4.1.8691.7.86.1.19.2not-accessiblecurrent
vlanEntry
OBJECT-TYPE
VLAN Entry.
1.3.6.1.4.1.8691.7.86.1.19.2.1not-accessiblecurrent
vlanId
OBJECT-TYPE
The VLAN id.
1.3.6.1.4.1.8691.7.86.1.19.2.1.1INTEGER (1..4094)read-onlycurrent
joinedAccessPorts
OBJECT-TYPE
The access ports that joined this VID.
1.3.6.1.4.1.8691.7.86.1.19.2.1.2PortListread-onlycurrent
joinedTrunkPorts
OBJECT-TYPE
The trunk ports that joined this VID.
1.3.6.1.4.1.8691.7.86.1.19.2.1.3PortListread-onlycurrent
joinedHybridPorts
OBJECT-TYPE
The hybrid ports that joined this VID.
1.3.6.1.4.1.8691.7.86.1.19.2.1.4PortListread-onlycurrent
managementVlanId
OBJECT-TYPE
The management VLAN id.
1.3.6.1.4.1.8691.7.86.1.19.3INTEGERread-writecurrent
vlanType
OBJECT-TYPE
VLAN Type.
1.3.6.1.4.1.8691.7.86.1.19.4INTEGER {tagBased(0), portBased(1)}read-writecurrent
portbaseVlanSettingTable
OBJECT-TYPE
Port base Vlan Setting Table.
1.3.6.1.4.1.8691.7.86.1.19.5not-accessiblecurrent
portbaseVlanSettingEntry
OBJECT-TYPE
Port base Vlan Setting Entry.
1.3.6.1.4.1.8691.7.86.1.19.5.1not-accessiblecurrent
portbaseVlanSettingIndex
OBJECT-TYPE
port base Vlan Group Index.
1.3.6.1.4.1.8691.7.86.1.19.5.1.1INTEGERread-onlycurrent
portbaseVlanMemberPorts
OBJECT-TYPE
port base Vlan Group Member Ports.
1.3.6.1.4.1.8691.7.86.1.19.5.1.2PortListread-writecurrent
enableGvrp
OBJECT-TYPE
Enable GVRP.
1.3.6.1.4.1.8691.7.86.1.19.6INTEGER {disable(0), enable(1)}read-writecurrent
multicastFiltering
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.20
igmpSnooping
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.20.1
querierQueryInterval
OBJECT-TYPE
This query interval of the querier function for this VLAN.
1.3.6.1.4.1.8691.7.86.1.20.1.1INTEGER (20..600)read-writecurrent
igmpSnoopingSettingTable
OBJECT-TYPE
The IGMP snooping setting table.
1.3.6.1.4.1.8691.7.86.1.20.1.2not-accessiblecurrent
igmpSnoopingSettingEntry
OBJECT-TYPE
The IGMP snooping setting Entry.
1.3.6.1.4.1.8691.7.86.1.20.1.2.1not-accessiblecurrent
enableIgmpSnooping
OBJECT-TYPE
This enable the IGMP snooping function in this VLAN.
1.3.6.1.4.1.8691.7.86.1.20.1.2.1.1INTEGER {disable(0), enable(1)}read-writecurrent
enableQuerier
OBJECT-TYPE
This enable the querier function for this VLAN.
1.3.6.1.4.1.8691.7.86.1.20.1.2.1.2INTEGER {disable(0), enable(1)}read-writecurrent
fixedMulticastQuerierPorts
OBJECT-TYPE
The ports that multicast-Querier exist.
1.3.6.1.4.1.8691.7.86.1.20.1.2.1.3PortListread-writecurrent
learnedMulticastQuerierPorts
OBJECT-TYPE
The ports that multicast-Querier exist.
1.3.6.1.4.1.8691.7.86.1.20.1.2.1.4PortListread-onlycurrent
enableGlobalIgmpSnooping
OBJECT-TYPE
This enable the IGMP snooping function .
1.3.6.1.4.1.8691.7.86.1.20.1.4INTEGER {disable(0), enable(1)}read-writecurrent
multicastFastForwarding
OBJECT-TYPE
This Enable Multicast Fast Forwarding Mode function .
1.3.6.1.4.1.8691.7.86.1.20.1.7INTEGER {disable(0), enable(1)}read-writecurrent
staticMulticast
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.20.2
staticMulticastTable
OBJECT-TYPE
The static multicast table.
1.3.6.1.4.1.8691.7.86.1.20.2.1not-accessiblecurrent
staticMulticastEntry
OBJECT-TYPE
Static multicast Entry.
1.3.6.1.4.1.8691.7.86.1.20.2.1.1not-accessiblecurrent
staticMulticastAddress
OBJECT-TYPE
The static multicast address.
1.3.6.1.4.1.8691.7.86.1.20.2.1.1.1MacAddressread-createcurrent
staticMulticastPorts
OBJECT-TYPE
The port map of the static multicast address.
1.3.6.1.4.1.8691.7.86.1.20.2.1.1.2PortListread-createcurrent
staticMulticastStatus
OBJECT-TYPE
The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then active. Use destroy to delete this row.
1.3.6.1.4.1.8691.7.86.1.20.2.1.1.3INTEGER {active(1), createAndGo(4), createAndWait(5), destroy(6)}read-createcurrent
gmrp
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.20.3
gmrpSettingTable
OBJECT-TYPE
The GMRP setting table.
1.3.6.1.4.1.8691.7.86.1.20.3.1not-accessiblecurrent
gmrpSettingEntry
OBJECT-TYPE
The GMRP Setting Entry.
1.3.6.1.4.1.8691.7.86.1.20.3.1.1not-accessiblecurrent
enableGMRP
OBJECT-TYPE
Enable/Disable GMRP.
1.3.6.1.4.1.8691.7.86.1.20.3.1.1.1INTEGER {disable(0), enable(1)}read-writecurrent
gmrpTable
OBJECT-TYPE
The GMRP status table.
1.3.6.1.4.1.8691.7.86.1.20.3.2not-accessiblecurrent
gmrpEntry
OBJECT-TYPE
The GMRP Status Entry.
1.3.6.1.4.1.8691.7.86.1.20.3.2.1not-accessiblecurrent
gmrpMulticastGroup
OBJECT-TYPE
GMRP multicast group.
1.3.6.1.4.1.8691.7.86.1.20.3.2.1.1MacAddressread-onlycurrent
gmrpFixedPorts
OBJECT-TYPE
The ports that joined GMRP multicast group manually.
1.3.6.1.4.1.8691.7.86.1.20.3.2.1.2PortListread-onlycurrent
gmrpLearnedPorts
OBJECT-TYPE
The ports that joined GMRP multicast group by GMRP learning.
1.3.6.1.4.1.8691.7.86.1.20.3.2.1.3PortListread-onlycurrent
rateLimiting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.21
normalModeRateLimitingIngressTable
OBJECT-TYPE
The rate limiting table.
1.3.6.1.4.1.8691.7.86.1.21.1not-accessiblecurrent
normalModeRateLimitingIngressEntry
OBJECT-TYPE
Rate limiting Entry.
1.3.6.1.4.1.8691.7.86.1.21.1.1not-accessiblecurrent
limitMode
OBJECT-TYPE
The limit mode.
1.3.6.1.4.1.8691.7.86.1.21.1.1.1INTEGER {all(0), bmucast(1), bmcast(2), bcast(3)}read-writecurrent
lowPriLimitRate
OBJECT-TYPE
The limiting rate of low priority queue.
1.3.6.1.4.1.8691.7.86.1.21.1.1.2INTEGER {notlimit(0), limit128k(1), limit256k(2), limit512k(3), limit1M(4), limit2M(5), limit4M(6), limit8M(7)}read-writecurrent
normalPriLimitRate
OBJECT-TYPE
The limiting rate of normal priority queue. The values being equal to or double value of lowPriLimitRate are valid for set.
1.3.6.1.4.1.8691.7.86.1.21.1.1.3INTEGER {notlimit(0), limit128k(1), limit256k(2), limit512k(3), limit1M(4), limit2M(5), limit4M(6), limit8M(7), limit16M(8)}read-writecurrent
mediumPriLimitRate
OBJECT-TYPE
The limiting rate of medium priority queue. The values being equal to or double value of normalPriLimitRate are valid for set.
1.3.6.1.4.1.8691.7.86.1.21.1.1.4INTEGER {notlimit(0), limit128k(1), limit256k(2), limit512k(3), limit1M(4), limit2M(5), limit4M(6), limit8M(7), limit16M(8), limit32M(9)}read-writecurrent
highPriLimitRate
OBJECT-TYPE
The limiting rate of high priority queue. The values being equal to or double value of mediumPriLimitRate are valid for set.
1.3.6.1.4.1.8691.7.86.1.21.1.1.5INTEGER {notlimit(0), limit128k(1), limit256k(2), limit512k(3), limit1M(4), limit2M(5), limit4M(6), limit8M(7), limit16M(8), limit32M(9), limit64M(10)}read-writecurrent
egressLimit
OBJECT-TYPE
The ingress limit mode.
1.3.6.1.4.1.8691.7.86.1.21.1.1.6INTEGER {notlimited(0), percentage03(1), percentage05(2), percentage10(3), percentage15(4), percentage25(5), percentage35(6), percentage50(7), percentage65(8), percentage85(9)}read-writecurrent
portDisableMode
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.21.3
portDisableModePeriod
OBJECT-TYPE
Check time.
1.3.6.1.4.1.8691.7.86.1.21.3.1INTEGER (1..65535)read-writecurrent
portDisableModeTable
OBJECT-TYPE
The rate limiting table.
1.3.6.1.4.1.8691.7.86.1.21.3.2not-accessiblecurrent
portDisableModeEntry
OBJECT-TYPE
Rate limiting Entry.
1.3.6.1.4.1.8691.7.86.1.21.3.2.1not-accessiblecurrent
ingressLimit
OBJECT-TYPE
The ingress limit mode.
1.3.6.1.4.1.8691.7.86.1.21.3.2.1.1INTEGER {notlimited(0), rateMega1Fps4464(1), rateMega2Fps7441(2), rateMega3Fps14881(3), rateMega4Fps22322(4), rateMega5Fps37203(5), rateMega6Fps52084(6), rateMega7Fps74405(7), rateGiga1Fps44640(8), rateGiga2Fps74410(9), rateGiga3Fps148810(10), rateGiga4Fps223220(11), rateGiga5Fps372030(12), rateGiga6Fps520840(13), rateGiga7Fps744050(14)}read-writecurrent
rateLimitingMode
OBJECT-TYPE
The rate limiting mode.
1.3.6.1.4.1.8691.7.86.1.21.4INTEGER {normal(0), portDisable(1)}read-writecurrent
security
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.22
userLoginSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.22.1
userLoginServer
OBJECT-TYPE
Set user login server option.
1.3.6.1.4.1.8691.7.86.1.22.1.1INTEGER {tacacs(1), radius(2)}read-writecurrent
tacacsServerSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.22.1.2
tacacsLoginAuthServer
OBJECT-TYPE
Set Tacacs+ Server IP Address/Domain name.
1.3.6.1.4.1.8691.7.86.1.22.1.2.1DisplayStringread-writecurrent
tacacsLoginAuthPort
OBJECT-TYPE
Set Tacacs+ Port.
1.3.6.1.4.1.8691.7.86.1.22.1.2.2INTEGER (1..65535)read-writecurrent
tacacsLoginAuthSharedKey
OBJECT-TYPE
Set Tacacs+ Shared Key.
1.3.6.1.4.1.8691.7.86.1.22.1.2.3DisplayStringread-writecurrent
tacacsLoginAuthAuthType
OBJECT-TYPE
Set Tacacs+ Shared Key.
1.3.6.1.4.1.8691.7.86.1.22.1.2.4INTEGER {ascii(0), pap(1), chap(2), mschap(4)}read-writecurrent
tacacsLoginAuthTimeout
OBJECT-TYPE
Set Tacacs+ Shared Key.
1.3.6.1.4.1.8691.7.86.1.22.1.2.5INTEGER (1..255)read-writecurrent
radiusServerSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.22.1.3
radiusLoginAuthServer
OBJECT-TYPE
Set Radius Server IP Address/Domain name.
1.3.6.1.4.1.8691.7.86.1.22.1.3.1DisplayStringread-writecurrent
radiusLoginAuthPort
OBJECT-TYPE
Set Radius Port.
1.3.6.1.4.1.8691.7.86.1.22.1.3.2INTEGER (1..65535)read-writecurrent
radiusLoginAuthSharedKey
OBJECT-TYPE
Set Radius Shared Key.
1.3.6.1.4.1.8691.7.86.1.22.1.3.3DisplayStringread-writecurrent
radiusLoginAuthAuthType
OBJECT-TYPE
Set Radius Shared Key.
1.3.6.1.4.1.8691.7.86.1.22.1.3.4INTEGER {eap-md5(0)}read-writecurrent
radiusLoginAuthTimeout
OBJECT-TYPE
Set Radius Shared Key.
1.3.6.1.4.1.8691.7.86.1.22.1.3.5INTEGER (1..255)read-writecurrent
portAccessControl
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.22.2
staticPortLock
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.22.2.1
staticPortLockAddress
OBJECT-TYPE
The static port lock address.
1.3.6.1.4.1.8691.7.86.1.22.2.1.1MacAddressread-createcurrent
staticPortLockPort
OBJECT-TYPE
The port of the static port lock address.
1.3.6.1.4.1.8691.7.86.1.22.2.1.2INTEGERread-createcurrent
staticPortLockStatus
OBJECT-TYPE
The status is active to indicate normal. Use createAndGo to create new on multiple SET.
1.3.6.1.4.1.8691.7.86.1.22.2.1.3INTEGER {active(1), createAndGo(4)}read-createcurrent
dot1x
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.22.2.2
dataBaseOption
OBJECT-TYPE
Set IEEE 802.1X database option.
1.3.6.1.4.1.8691.7.86.1.22.2.2.1INTEGER {local(1), radius(2), radiuslocal(3)}read-writecurrent
dot1xReauthEnable
OBJECT-TYPE
Enable/Disable IEEE 802.1X Re-authentication.
1.3.6.1.4.1.8691.7.86.1.22.2.2.5INTEGER {disable(0), enable(1)}read-writecurrent
dot1xReauthPeriod
OBJECT-TYPE
Set IEEE 802.1X Re-authentication Period.
1.3.6.1.4.1.8691.7.86.1.22.2.2.6INTEGER (60..3600)read-writecurrent
dot1xSettingTable
OBJECT-TYPE
IEEE 802.1X Port Setting Table.
1.3.6.1.4.1.8691.7.86.1.22.2.2.7not-accessiblecurrent
dot1xSettingEntry
OBJECT-TYPE
IEEE 802.1X Port Setting Entry.
1.3.6.1.4.1.8691.7.86.1.22.2.2.7.1not-accessiblecurrent
enableDot1X
OBJECT-TYPE
Enable/Disable IEEE 802.1X.
1.3.6.1.4.1.8691.7.86.1.22.2.2.7.1.1INTEGER {disable(0), enable(1)}read-writecurrent
dot1xReauthTable
OBJECT-TYPE
IEEE 802.1X Re-authentication Table.
1.3.6.1.4.1.8691.7.86.1.22.2.2.8not-accessiblecurrent
dot1xReauthEntry
OBJECT-TYPE
IEEE 802.1X Re-authentication Entry.
1.3.6.1.4.1.8691.7.86.1.22.2.2.8.1not-accessiblecurrent
dot1xReauthPortIndex
OBJECT-TYPE
IEEE 802.1X Enabled Port Index.
1.3.6.1.4.1.8691.7.86.1.22.2.2.8.1.1INTEGERread-onlycurrent
dot1xReauth
OBJECT-TYPE
Reauth IEEE 802.1X.
1.3.6.1.4.1.8691.7.86.1.22.2.2.8.1.2INTEGER {no(0), yes(1)}read-writecurrent
dot1xRadius
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.22.2.2.9
dot1xSameAsAuthServer
OBJECT-TYPE
Set Radius Server IP Address/Domain name.
1.3.6.1.4.1.8691.7.86.1.22.2.2.9.1INTEGER {notSame(0), same(1)}read-writecurrent
dot1x1stRadiusServer
OBJECT-TYPE
Set Radius Server IP Address/Domain name.
1.3.6.1.4.1.8691.7.86.1.22.2.2.9.2DisplayStringread-writecurrent
dot1x1stRadiusPort
OBJECT-TYPE
Set Radius Port.
1.3.6.1.4.1.8691.7.86.1.22.2.2.9.3INTEGER (1..65535)read-writecurrent
dot1x1stRadiusSharedKey
OBJECT-TYPE
Set Radius Shared Key.
1.3.6.1.4.1.8691.7.86.1.22.2.2.9.4DisplayStringread-writecurrent
dot1x2ndRadiusServer
OBJECT-TYPE
Set Radius Server IP Address/Domain name.
1.3.6.1.4.1.8691.7.86.1.22.2.2.9.5DisplayStringread-writecurrent
dot1x2ndRadiusPort
OBJECT-TYPE
Set Radius Port.
1.3.6.1.4.1.8691.7.86.1.22.2.2.9.6INTEGER (1..65535)read-writecurrent
dot1x2ndRadiusSharedKey
OBJECT-TYPE
Set Radius Shared Key.
1.3.6.1.4.1.8691.7.86.1.22.2.2.9.7DisplayStringread-writecurrent
portAccessControlTable
OBJECT-TYPE
The Port Access Control table.
1.3.6.1.4.1.8691.7.86.1.22.2.3not-accessiblecurrent
portAccessControlEntry
OBJECT-TYPE
The Port Access Control table entry.
1.3.6.1.4.1.8691.7.86.1.22.2.3.1not-accessiblecurrent
portAccessControlAddress
OBJECT-TYPE
The MAC address which is static locked or IEEE 802.1X authorized.
1.3.6.1.4.1.8691.7.86.1.22.2.3.1.1MacAddressread-onlycurrent
portAccessControlPortNo
OBJECT-TYPE
The port number that the Port Access Control address resides.
1.3.6.1.4.1.8691.7.86.1.22.2.3.1.2INTEGERread-onlycurrent
portAccessControlAccessStatus
OBJECT-TYPE
The access status of the Port Access Control address.
1.3.6.1.4.1.8691.7.86.1.22.2.3.1.3INTEGER {staticLock(1), authorized(2), unAuthorized(3), authorizing(4)}read-onlycurrent
portAccessControlStatus
OBJECT-TYPE
The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then active. Use destroy to delete this row.
1.3.6.1.4.1.8691.7.86.1.22.2.3.1.4INTEGER {active(1), createAndGo(4), createAndWait(5), destroy(6)}read-createcurrent
accessibleIP
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.30
enableAccessibleIP
OBJECT-TYPE
Enable the accessible IP address list.
1.3.6.1.4.1.8691.7.86.1.30.1INTEGER {disable(0), enable(1)}read-writecurrent
accessibleIpTable
OBJECT-TYPE
accessibleIP.
1.3.6.1.4.1.8691.7.86.1.30.2not-accessiblecurrent
accessibleIpEntry
OBJECT-TYPE
Accessible IP address entry.
1.3.6.1.4.1.8691.7.86.1.30.2.1not-accessiblecurrent
accessibleIpAddress
OBJECT-TYPE
Accessible IP address
1.3.6.1.4.1.8691.7.86.1.30.2.1.1IpAddressread-createcurrent
accessibleIpNetMask
OBJECT-TYPE
Accessible IP netmask.
1.3.6.1.4.1.8691.7.86.1.30.2.1.2IpAddressread-createcurrent
accessibleIpStatus
OBJECT-TYPE
The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then active. Use destroy to delete this row.
1.3.6.1.4.1.8691.7.86.1.30.2.1.3INTEGER {active(1), createAndGo(4), createAndWait(5), destroy(6)}read-createcurrent
sysFileUpdate
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.31
tftpServer
OBJECT-TYPE
The TFTP Server name(IP Address)
1.3.6.1.4.1.8691.7.86.1.31.1DisplayStringread-writecurrent
firmwarePathName
OBJECT-TYPE
The path name of firmware file in the TFTP Server
1.3.6.1.4.1.8691.7.86.1.31.2DisplayStringread-writecurrent
logPathName
OBJECT-TYPE
The path name of log file in the TFTP Server
1.3.6.1.4.1.8691.7.86.1.31.3DisplayStringread-writecurrent
confPathName
OBJECT-TYPE
The path name of configuration file in the TFTP Server
1.3.6.1.4.1.8691.7.86.1.31.4DisplayStringread-writecurrent
tftpUpdate
OBJECT-TYPE
1.3.6.1.4.1.8691.7.86.1.31.5INTEGER {importFirmware(1), importConfig(2), exportConfig(3), exportLog(4)}read-createcurrent
timeSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.32
sysDateTime
OBJECT-TYPE
The date time of system
1.3.6.1.4.1.8691.7.86.1.32.1DateAndTimeread-writecurrent
calibratePeriod
OBJECT-TYPE
The period (seconds) that calibrate with time server
1.3.6.1.4.1.8691.7.86.1.32.2INTEGERread-writecurrent
timeServer1
OBJECT-TYPE
The first time server
1.3.6.1.4.1.8691.7.86.1.32.3DisplayStringread-writecurrent
timeServer2
OBJECT-TYPE
The second time server
1.3.6.1.4.1.8691.7.86.1.32.4DisplayStringread-writecurrent
daylightSaving
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.32.5
startMonth
OBJECT-TYPE
Setting Start Month of Daylight Saving time
1.3.6.1.4.1.8691.7.86.1.32.5.1INTEGER {na(0), jan(1), feb(2), mar(3), apr(4), may(5), jun(6), jul(7), aug(8), sep(9), oct(10), nov(11), dec(12)}read-writecurrent
startWeek
OBJECT-TYPE
Setting Start Week of Daylight Saving time
1.3.6.1.4.1.8691.7.86.1.32.5.2INTEGER {na(0), week1(1), week2(2), week3(3), week4(4), weeklast(6)}read-writecurrent
startDay
OBJECT-TYPE
Setting Start Day of Daylight Saving time
1.3.6.1.4.1.8691.7.86.1.32.5.3INTEGER {na(0), sun(1), mon(2), tue(3), wed(4), thu(5), fri(6), sat(7)}read-writecurrent
startHour
OBJECT-TYPE
Setting Start Hour of Daylight Saving time
1.3.6.1.4.1.8691.7.86.1.32.5.4INTEGERread-writecurrent
endMonth
OBJECT-TYPE
Setting End Month of Daylight Saving time
1.3.6.1.4.1.8691.7.86.1.32.5.5INTEGER {na(0), jan(1), feb(2), mar(3), apr(4), may(5), jun(6), jul(7), aug(8), sep(9), oct(10), nov(11), dec(12)}read-writecurrent
endWeek
OBJECT-TYPE
Setting End Week of Daylight Saving time
1.3.6.1.4.1.8691.7.86.1.32.5.6INTEGER {na(0), week1(1), week2(2), week3(3), week4(4), weeklast(6)}read-writecurrent
endDay
OBJECT-TYPE
Setting End Day of Daylight Saving time
1.3.6.1.4.1.8691.7.86.1.32.5.7INTEGER {na(0), sun(1), mon(2), tue(3), wed(4), thu(5), fri(6), sat(7)}read-writecurrent
endHour
OBJECT-TYPE
Setting End Hour of Daylight Saving time
1.3.6.1.4.1.8691.7.86.1.32.5.8INTEGERread-writecurrent
offsetHours
OBJECT-TYPE
Setting Offset Hours of Daylight Saving time
1.3.6.1.4.1.8691.7.86.1.32.5.9INTEGERread-writecurrent
enableNTPServer
OBJECT-TYPE
This enable NTP Server.
1.3.6.1.4.1.8691.7.86.1.32.6INTEGER {disable(0), enable(1)}read-writecurrent
timeProtocolOption
OBJECT-TYPE
Time Protocol.
1.3.6.1.4.1.8691.7.86.1.32.7INTEGER {disable(0), sntp(1), ntp(2)}read-writecurrent
dipSwitchSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.34
dipSwitchEnableTurboRing
OBJECT-TYPE
Enable TurboRing Dip Switch functions
1.3.6.1.4.1.8691.7.86.1.34.1INTEGER {disable(0), enable(1)}read-writecurrent
dipSwitchTurboRingPole
OBJECT-TYPE
The TurboRing Pole status of Dip switch.
1.3.6.1.4.1.8691.7.86.1.34.2INTEGER {off(0), on(1)}read-onlycurrent
dipSwitchRingCouplingPole
OBJECT-TYPE
The Ring Coupling Pole status of Dip switch.
1.3.6.1.4.1.8691.7.86.1.34.3INTEGER {off(0), on(1)}read-onlycurrent
dipSwitchRingMasterPole
OBJECT-TYPE
The Ring Master Pole status of Dip switch.
1.3.6.1.4.1.8691.7.86.1.34.4INTEGER {off(0), on(1)}read-onlycurrent
backupMediaSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.35
backupMediaAutoLoad
OBJECT-TYPE
Enable Abc-01 backupMedia configuration PowerOn Auto Load functions
1.3.6.1.4.1.8691.7.86.1.35.1INTEGER {disable(0), enable(1)}read-writecurrent
enableWarmStart
OBJECT-TYPE
Enable to restart MOXA ethernet switch.
1.3.6.1.4.1.8691.7.86.1.36INTEGER {no(0), yes(1)}read-writecurrent
syslogSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.37
syslogServer1
OBJECT-TYPE
The syslog server 1
1.3.6.1.4.1.8691.7.86.1.37.1DisplayStringread-writecurrent
syslogServer1port
OBJECT-TYPE
The syslog server 1 port
1.3.6.1.4.1.8691.7.86.1.37.2INTEGERread-writecurrent
syslogServer2
OBJECT-TYPE
The syslog server 2
1.3.6.1.4.1.8691.7.86.1.37.3DisplayStringread-writecurrent
syslogServer2port
OBJECT-TYPE
The syslog server 2 port
1.3.6.1.4.1.8691.7.86.1.37.4INTEGERread-writecurrent
syslogServer3
OBJECT-TYPE
The syslog server 3
1.3.6.1.4.1.8691.7.86.1.37.5DisplayStringread-writecurrent
syslogServer3port
OBJECT-TYPE
The syslog server 3 port
1.3.6.1.4.1.8691.7.86.1.37.6INTEGERread-writecurrent
dhcpRelayAgentSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.39
dhcpServer1
OBJECT-TYPE
The dhcp Relay Agent Server 1.
1.3.6.1.4.1.8691.7.86.1.39.1DisplayStringread-writecurrent
dhcpServer2
OBJECT-TYPE
The dhcp Relay Agent Server 2.
1.3.6.1.4.1.8691.7.86.1.39.2DisplayStringread-writecurrent
dhcpServer3
OBJECT-TYPE
The dhcp Relay Agent Server 3.
1.3.6.1.4.1.8691.7.86.1.39.3DisplayStringread-writecurrent
dhcpServer4
OBJECT-TYPE
The dhcp Relay Agent Server 4.
1.3.6.1.4.1.8691.7.86.1.39.4DisplayStringread-writecurrent
option82Setting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.39.5
enableOption82
OBJECT-TYPE
Enable DHCP Option 82
1.3.6.1.4.1.8691.7.86.1.39.5.1INTEGER {disable(0), enable(1)}read-writecurrent
option82Type
OBJECT-TYPE
Option 82 Type selector
1.3.6.1.4.1.8691.7.86.1.39.5.2INTEGER {ip(0), mac(1), client-id(2), other(3)}read-writecurrent
option82Value
OBJECT-TYPE
Option 82 Type Value
1.3.6.1.4.1.8691.7.86.1.39.5.3DisplayStringread-writecurrent
option82ValueDisplay
OBJECT-TYPE
Option 82 Type Value Display
1.3.6.1.4.1.8691.7.86.1.39.5.4DisplayStringread-onlycurrent
dhcpFunctionTable
OBJECT-TYPE
DHCP Function Table.
1.3.6.1.4.1.8691.7.86.1.39.6not-accessiblecurrent
dhcpFunctionEntry
OBJECT-TYPE
DHCP Function Table Entry.
1.3.6.1.4.1.8691.7.86.1.39.6.1not-accessiblecurrent
dhcpPortIndex
OBJECT-TYPE
The DHCP Port Index.
1.3.6.1.4.1.8691.7.86.1.39.6.1.1INTEGERread-onlycurrent
circuitID
OBJECT-TYPE
The Circuit ID.
1.3.6.1.4.1.8691.7.86.1.39.6.1.2DisplayStringread-onlycurrent
option82Enable
OBJECT-TYPE
This enable option 82 of the port.
1.3.6.1.4.1.8691.7.86.1.39.6.1.3INTEGER {disable(0), enable(1)}read-writecurrent
poeSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.40
poePortTable
OBJECT-TYPE
Poe Port Function Table.
1.3.6.1.4.1.8691.7.86.1.40.3not-accessiblecurrent
poePortEntry
OBJECT-TYPE
Poe Port Function Table Entry.
1.3.6.1.4.1.8691.7.86.1.40.3.1not-accessiblecurrent
poePortIndex
OBJECT-TYPE
PoE port index.
1.3.6.1.4.1.8691.7.86.1.40.3.1.1INTEGERread-onlycurrent
poePortEnable
OBJECT-TYPE
PoE port Enable.
1.3.6.1.4.1.8691.7.86.1.40.3.1.2INTEGER {disable(0), enable(1)}read-writecurrent
poePowerOutputMode
OBJECT-TYPE
PoE port Power Output Mode.
1.3.6.1.4.1.8691.7.86.1.40.3.1.3INTEGER {auto(0), highPower(1), force(2)}read-writecurrent
powerLimit
OBJECT-TYPE
PoE Port Power Budget
1.3.6.1.4.1.8691.7.86.1.40.3.1.4INTEGERread-writecurrent
pdfailure
OBJECT-TYPE
PD check Enable per port.
1.3.6.1.4.1.8691.7.86.1.40.3.1.5INTEGER {disable(0), enable(1)}read-writecurrent
pdipaddr
OBJECT-TYPE
PD ip address.
1.3.6.1.4.1.8691.7.86.1.40.3.1.6DisplayStringread-writecurrent
pdPollingInterval
OBJECT-TYPE
PD check interval
1.3.6.1.4.1.8691.7.86.1.40.3.1.7INTEGERread-writecurrent
poeporttimetabling
OBJECT-TYPE
PoE port timetabling
1.3.6.1.4.1.8691.7.86.1.40.3.1.8INTEGER {disable(0), enable(1)}read-writecurrent
poeTimeTable
OBJECT-TYPE
PoE Time Table.
1.3.6.1.4.1.8691.7.86.1.40.5not-accessiblecurrent
poeTimeEntry
OBJECT-TYPE
PoE Time Table Entry.
1.3.6.1.4.1.8691.7.86.1.40.5.1not-accessiblecurrent
poeTPortIndex
OBJECT-TYPE
port Index for time table.
1.3.6.1.4.1.8691.7.86.1.40.5.1.1INTEGERread-onlycurrent
poeWeekDay
OBJECT-TYPE
day index for a week.
1.3.6.1.4.1.8691.7.86.1.40.5.1.2INTEGERread-onlycurrent
poeDayEnable
OBJECT-TYPE
Enable or not for one day.
1.3.6.1.4.1.8691.7.86.1.40.5.1.3INTEGER {disable(0), enable(1)}read-writecurrent
poeDayStart
OBJECT-TYPE
PoE Port Start Time
1.3.6.1.4.1.8691.7.86.1.40.5.1.4INTEGERread-writecurrent
poeDayStop
OBJECT-TYPE
PoE Port Stop Time
1.3.6.1.4.1.8691.7.86.1.40.5.1.5INTEGERread-writecurrent
poeStatusTable
OBJECT-TYPE
PoE Status Table.
1.3.6.1.4.1.8691.7.86.1.40.6not-accessiblecurrent
poeStatusEntry
OBJECT-TYPE
PoE Status Table Entry.
1.3.6.1.4.1.8691.7.86.1.40.6.1not-accessiblecurrent
poePortStatus
OBJECT-TYPE
PoE port Status.
1.3.6.1.4.1.8691.7.86.1.40.6.1.1INTEGER {disable(0), enable(1)}read-onlycurrent
poePortConsumption
OBJECT-TYPE
PoE port Consumption
1.3.6.1.4.1.8691.7.86.1.40.6.1.2INTEGERread-onlycurrent
poePortVoltage
OBJECT-TYPE
PoE port Voltage
1.3.6.1.4.1.8691.7.86.1.40.6.1.3INTEGERread-onlycurrent
poePortCurrent
OBJECT-TYPE
PoE port Current
1.3.6.1.4.1.8691.7.86.1.40.6.1.4INTEGERread-onlycurrent
ieee1588Setting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.41
ptpv1Setting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.41.1
enablePtpv1
OBJECT-TYPE
This enable the PTP function.
1.3.6.1.4.1.8691.7.86.1.41.1.1INTEGER {disable(0), enable(1)}read-writecurrent
clockModev1
OBJECT-TYPE
the clock mode of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.1.2INTEGER {v1BC(0), v2E2E2stepTC(1), v2E2E1stepTC(2), v2P2PTC(3), v2E2EBC(4), v2P2PBC(5)}read-writecurrent
syncIntervalv1
OBJECT-TYPE
the logSyncInterval of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.1.3INTEGER {oneSec(0), twoSec(1), fourSec(2), eightSec(3), sixteenSec(4)}read-writecurrent
subDomainNamev1
OBJECT-TYPE
The subdomain name of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.1.4INTEGER {dflt(0), alt1(1), alt2(2), alt3(3)}read-writecurrent
preferMasterv1
OBJECT-TYPE
This enable the PTP prefer master function.
1.3.6.1.4.1.8691.7.86.1.41.1.5INTEGER {false(0), true(1)}read-writecurrent
ptpv2Setting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.41.2
enablePtp
OBJECT-TYPE
This enable the PTP function.
1.3.6.1.4.1.8691.7.86.1.41.2.1INTEGER {disable(0), enable(1)}read-writecurrent
clockMode
OBJECT-TYPE
the clock mode of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.2.2INTEGER {v1BC(0), v2E2E2stepTC(1), v2E2E1stepTC(2), v2P2PTC(3), v2E2EBC(4), v2P2PBC(5)}read-writecurrent
transport
OBJECT-TYPE
the transport mode of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.2.3INTEGER {ieee802dot3(0), ipv4(1)}read-writecurrent
syncInterval
OBJECT-TYPE
the logSyncInterval of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.2.4INTEGER {t128msec(-3), t256msec(-2), t512msec(-1), t1sec(0), t2sec(1)}read-writecurrent
logMinDelayReqInterval
OBJECT-TYPE
the logMinDelayReqInterval of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.2.5INTEGER {t1sec(0), t2sec(1), t4sec(2), t8sec(3), t16sec(4), t32sec(5)}read-writecurrent
logMinPdelayReqInterval
OBJECT-TYPE
the logMinPdelayReqInterval of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.2.6INTEGER {t512msec(-1), t1sec(0), t2sec(1), t4sec(2), t8sec(3), t16sec(4), t32sec(5)}read-writecurrent
logAnnounceInterval
OBJECT-TYPE
the logAnnounceInterval of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.2.7INTEGER {t1sec(0), t2sec(1), t4sec(2), t8sec(3), t16sec(4)}read-writecurrent
announceReceiptTimeout
OBJECT-TYPE
the announceReceiptTimeout of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.2.8INTEGER (2..10)read-writecurrent
priority1
OBJECT-TYPE
the priority1 of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.2.9INTEGERread-writecurrent
priority2
OBJECT-TYPE
the priority2 of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.2.10INTEGERread-writecurrent
clockClass
OBJECT-TYPE
the clockClass of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.2.11INTEGERread-writecurrent
domainNumber
OBJECT-TYPE
The domain number of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.2.12INTEGER {dflt(0), alt1(1), alt2(2), alt3(3)}read-writecurrent
localUtcOffset
OBJECT-TYPE
the UTC offset of the local PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.2.13INTEGERread-writecurrent
localUtcOffsetValid
OBJECT-TYPE
the UTC offset valid of the local PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.2.14INTEGER {false(0), true(1)}read-writecurrent
localLeap59
OBJECT-TYPE
the leap59 of the local PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.2.15INTEGER {false(0), true(1)}read-writecurrent
localLeap61
OBJECT-TYPE
the leap61 of the local PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.2.16INTEGER {false(0), true(1)}read-writecurrent
localPtpTimescale
OBJECT-TYPE
the timescale of the local PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.2.17INTEGER {arb(0), ptp(1)}read-writecurrent
localArbTime
OBJECT-TYPE
the ARB time of the local PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.2.18INTEGERread-writecurrent
ptpv1Status
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.41.3
offsetToMasterv1
OBJECT-TYPE
The offset to master for nsec.
1.3.6.1.4.1.8691.7.86.1.41.3.1INTEGERread-onlycurrent
meanPathDelayv1
OBJECT-TYPE
The mean path delay of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.3.2INTEGERread-onlycurrent
grandMasterUuidv1
OBJECT-TYPE
The grand master UUID address of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.3.3MacAddressread-onlycurrent
parentUuidv1
OBJECT-TYPE
The parent master UUID address of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.3.4MacAddressread-onlycurrent
clockStratumv1
OBJECT-TYPE
The clock stratum of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.3.5INTEGERread-onlycurrent
clockIdentifierv1
OBJECT-TYPE
The clock identifier of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.3.6DisplayStringread-onlycurrent
ptpv2Status
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.41.4
offsetToMaster
OBJECT-TYPE
The offset to master for nsec.
1.3.6.1.4.1.8691.7.86.1.41.4.1INTEGERread-onlycurrent
meanPathDelay
OBJECT-TYPE
The mean path delay of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.4.2INTEGERread-onlycurrent
parentIdentity
OBJECT-TYPE
The parent identity of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.4.3DisplayStringread-onlycurrent
grandmasterIdentity
OBJECT-TYPE
The grandmaster identity of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.4.4DisplayStringread-onlycurrent
grandmasterClockClass
OBJECT-TYPE
The grandmaster clockClass of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.4.5INTEGERread-onlycurrent
grandmasterClockAccuracy
OBJECT-TYPE
The grandmaster clockAccuracy of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.4.6INTEGERread-onlycurrent
grandmasterPriority1
OBJECT-TYPE
The grandmaster priority1 of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.4.7INTEGERread-onlycurrent
grandmasterPriority2
OBJECT-TYPE
The grandmaster priority2 of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.4.8INTEGERread-onlycurrent
stepsRemoved
OBJECT-TYPE
The steps removed of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.4.9INTEGERread-onlycurrent
currentUtcOffset
OBJECT-TYPE
The current utc offset of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.4.10INTEGERread-onlycurrent
currentUtcOffsetValid
OBJECT-TYPE
The current utc offset valid flag of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.4.11DisplayStringread-onlycurrent
leap59
OBJECT-TYPE
The leap59 of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.4.12DisplayStringread-onlycurrent
leap61
OBJECT-TYPE
The leap61 of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.4.13DisplayStringread-onlycurrent
ptpTimescale
OBJECT-TYPE
The ptp timescale of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.4.14DisplayStringread-onlycurrent
timesource
OBJECT-TYPE
The timesource of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.4.15DisplayStringread-onlycurrent
ptpPortTable
OBJECT-TYPE
The ptp port table.
1.3.6.1.4.1.8691.7.86.1.41.5not-accessiblecurrent
ptpPortEntry
OBJECT-TYPE
The ptp port entry.
1.3.6.1.4.1.8691.7.86.1.41.5.1not-accessiblecurrent
ptpPortIndex
OBJECT-TYPE
The ptp port index.
1.3.6.1.4.1.8691.7.86.1.41.5.1.1INTEGERread-onlycurrent
ptpPortEnable
OBJECT-TYPE
This enable the ptp port.
1.3.6.1.4.1.8691.7.86.1.41.5.1.2INTEGER {disable(0), enable(1)}read-writecurrent
ptpPortStatus
OBJECT-TYPE
This port status of the PTP clock.
1.3.6.1.4.1.8691.7.86.1.41.5.1.3INTEGER {ptpInitializing(0), ptpFaulty(1), ptpDisabled(2), ptpListening(3), ptpPreMaster(4), ptpMaster(5), ptpPassive(6), ptpUncalibrated(7), ptpSlave(8)}read-onlycurrent
diagnosis
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.42
lldpSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.42.1
enableLLDP
OBJECT-TYPE
This enable the LLDP function.
1.3.6.1.4.1.8691.7.86.1.42.1.1INTEGER {disable(0), enable(1)}read-writecurrent
lldpMSGInterval
OBJECT-TYPE
The LLDP message transmit interval.
1.3.6.1.4.1.8691.7.86.1.42.1.2INTEGERread-writecurrent
webTimeout
OBJECT-TYPE
Web Timeout
1.3.6.1.4.1.8691.7.86.1.43INTEGERread-writecurrent
ageTime
OBJECT-TYPE
Web Timeout
1.3.6.1.4.1.8691.7.86.1.44INTEGERread-writecurrent
garpSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.45
joinTime
OBJECT-TYPE
Join Time (ms).
1.3.6.1.4.1.8691.7.86.1.45.1INTEGERread-writecurrent
leaveTime
OBJECT-TYPE
Leave Time (ms).
1.3.6.1.4.1.8691.7.86.1.45.2INTEGERread-writecurrent
leaveAllTime
OBJECT-TYPE
Leaveall Time (ms).
1.3.6.1.4.1.8691.7.86.1.45.3INTEGERread-writecurrent
eventlog
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.46
eventlogTable
OBJECT-TYPE
The table of eventlog.
1.3.6.1.4.1.8691.7.86.1.46.1not-accessiblecurrent
eventlogEntry
OBJECT-TYPE
The table entry of eventlog.
1.3.6.1.4.1.8691.7.86.1.46.1.1not-accessiblecurrent
eventlogIndex
OBJECT-TYPE
The index of eventlog entry.
1.3.6.1.4.1.8691.7.86.1.46.1.1.1INTEGERread-onlycurrent
eventlogBootup
OBJECT-TYPE
The reboot count of the system.
1.3.6.1.4.1.8691.7.86.1.46.1.1.2INTEGERread-onlycurrent
eventlogDate
OBJECT-TYPE
The date of the event occurred.
1.3.6.1.4.1.8691.7.86.1.46.1.1.3DisplayStringread-onlycurrent
eventlogTime
OBJECT-TYPE
The time of the event occurred.
1.3.6.1.4.1.8691.7.86.1.46.1.1.4DisplayStringread-onlycurrent
eventlogUptime
OBJECT-TYPE
The time of the event occurred after booting up.
1.3.6.1.4.1.8691.7.86.1.46.1.1.5DisplayStringread-onlycurrent
eventlogEvent
OBJECT-TYPE
The event which occurred in the system.
1.3.6.1.4.1.8691.7.86.1.46.1.1.6DisplayStringread-onlycurrent
eventlogClear
OBJECT-TYPE
To clear the eventlog, set value 1 to this field.
1.3.6.1.4.1.8691.7.86.1.46.2INTEGER {noop(0), clear(1)}read-writecurrent
industrialProtocol
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.47
eipSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.47.1
enableEtherNetIP
OBJECT-TYPE
This enable the EtherNet/IP function.
1.3.6.1.4.1.8691.7.86.1.47.1.1INTEGER {disable(0), enable(1)}read-writecurrent
modbusTCPSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.1.47.2
enableModbusTCP
OBJECT-TYPE
This enable the Modbus TCP function.
1.3.6.1.4.1.8691.7.86.1.47.2.1INTEGER {disable(0), enable(1)}read-writecurrent
enableFactoryDefault
OBJECT-TYPE
Reset all EtherDevice switch settings to factory default values
1.3.6.1.4.1.8691.7.86.1.48INTEGER {activate(1)}read-writecurrent
consoleLoginMode
OBJECT-TYPE
This option can change console login mode.
1.3.6.1.4.1.8691.7.86.1.51INTEGER {menu(0), cli(1)}read-writecurrent
cpuLoading5s
OBJECT-TYPE
CPU Loading for the past 5 seconds in %.
1.3.6.1.4.1.8691.7.86.1.53INTEGERread-onlycurrent
cpuLoading30s
OBJECT-TYPE
CPU Loading for the past 30 seconds in %.
1.3.6.1.4.1.8691.7.86.1.54INTEGERread-onlycurrent
cpuLoading300s
OBJECT-TYPE
CPU Loading for the past 5 minutes in %.
1.3.6.1.4.1.8691.7.86.1.55INTEGERread-onlycurrent
totalMemory
OBJECT-TYPE
Total size of System RAM.
1.3.6.1.4.1.8691.7.86.1.56INTEGERread-onlycurrent
freeMemory
OBJECT-TYPE
Total size of free dynamic memory
1.3.6.1.4.1.8691.7.86.1.57INTEGERread-onlycurrent
usedMemory
OBJECT-TYPE
Total size of used dynamic memory
1.3.6.1.4.1.8691.7.86.1.58INTEGERread-onlycurrent
memoryUsage
OBJECT-TYPE
The usage of memory size in %.
1.3.6.1.4.1.8691.7.86.1.59INTEGERread-onlycurrent
loopProtection
OBJECT-TYPE
This enable the Loop Protection function.
1.3.6.1.4.1.8691.7.86.1.61INTEGER {disable(0), enable(1)}read-writecurrent
swTraps
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.86.2
varconfigChangeTrap
OBJECT-TYPE
The configuration has been changed.
1.3.6.1.4.1.8691.7.86.2.1INTEGER {none(1), configChanged(2)}read-onlycurrent
varpower1Trap
OBJECT-TYPE
The power on/off changed.
1.3.6.1.4.1.8691.7.86.2.2INTEGER {none(1), on2off(2), off2on(3)}read-onlycurrent
varpower2Trap
OBJECT-TYPE
The power on/off changed.
1.3.6.1.4.1.8691.7.86.2.3INTEGER {none(1), on2off(2), off2on(3)}read-onlycurrent
vartrafficOverloadTrap
OBJECT-TYPE
The ethernet port's traffic loading exceeds the pre-defined value.
1.3.6.1.4.1.8691.7.86.2.4INTEGERread-onlycurrent
varredundancyTopologyChangedTrap
OBJECT-TYPE
The redundancy topology has been changed.
1.3.6.1.4.1.8691.7.86.2.5INTEGER {none(1), topologyChanged(2), topologyChangedTurboChainHead(3), topologyChangedTurboChainTail(4)}read-onlycurrent
varturboRingCouplingPortChangedTrap
OBJECT-TYPE
The coupling path of Turbo Ring has been changed.
1.3.6.1.4.1.8691.7.86.2.6INTEGER {none(1), couplingPortChanged(2)}read-onlycurrent
varturboRingMasterChangedTrap
OBJECT-TYPE
The master of Turbo Ring has been changed.
1.3.6.1.4.1.8691.7.86.2.7INTEGER {none(1), ringMasterChanged(2)}read-onlycurrent
varPoEWarningTrap
OBJECT-TYPE
The POE warning message.
1.3.6.1.4.1.8691.7.86.2.16INTEGER {pdOverCurrent(1), pdCheckFail(2), pdPowerOn(3), pdPowerOff(4), exceedSystemThreshold(5), pseFetBad(6), pseOverTemperature(7), pseVeeUvlo(8)}read-onlycurrent

Notifications

NameOIDStatus
configChangeTrap
NOTIFICATION-TYPE
The configuration has been changed.
1.3.6.1.4.1.8691.7.86.0.1current
power1Trap
NOTIFICATION-TYPE
The power on/off changed.
1.3.6.1.4.1.8691.7.86.0.2current
power2Trap
NOTIFICATION-TYPE
The power on/off changed.
1.3.6.1.4.1.8691.7.86.0.3current
trafficOverloadTrap
NOTIFICATION-TYPE
The ethernet port's traffic loading exceeds the pre-defined value.
1.3.6.1.4.1.8691.7.86.0.4current
redundancyTopologyChangedTrap
NOTIFICATION-TYPE
The redundancy topology has been changed.
1.3.6.1.4.1.8691.7.86.0.5current
turboRingCouplingPortChangedTrap
NOTIFICATION-TYPE
The coupling path of Turbo Ring has been changed.
1.3.6.1.4.1.8691.7.86.0.6current
turboRingMasterChangedTrap
NOTIFICATION-TYPE
The master of Turbo Ring has been changed.
1.3.6.1.4.1.8691.7.86.0.7current