MADGEBOX-MIB
- Registered at
- 1.3.6.1.4.1.494
- Namespace
- cisco
- Source file
MADGEBOX-MIB- Digest
sha256:17b7da5b47efb8aaa7046e86b35b4828fbbb3f9c7d98b7ace8b5bb1c69087ec2
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
MADGEBOX-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Under this module's arcs
Where the registration tree carries on below this module.
| Arc | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.494.4 | ringswitch | MADGERSW-MIB |
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| DisplayString type | ||||
| MacAddress type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| madge OBJECT-IDENTITY | 1.3.6.1.4.1.494 | |||
| madgeBox OBJECT-IDENTITY | 1.3.6.1.4.1.494.10 | |||
| madgeConfig OBJECT-IDENTITY | 1.3.6.1.4.1.494.10.1 | |||
| madgeConfigIPAddress OBJECT-TYPE The IP address of the device. | 1.3.6.1.4.1.494.10.1.1 | IpAddress | read-write | mandatory |
| madgeConfigIPGateway OBJECT-TYPE The default IP gateway for the device. | 1.3.6.1.4.1.494.10.1.2 | IpAddress | read-write | mandatory |
| madgeConfigIPSubnetMask OBJECT-TYPE The IP subnet mask of the device. | 1.3.6.1.4.1.494.10.1.3 | IpAddress | read-write | mandatory |
| madgeConfigSerialNumber OBJECT-TYPE The burnt-in identifier of the device. This is a unique number and in most cases maps directly to the base MAC address of the device | 1.3.6.1.4.1.494.10.1.4 | MacAddress | read-only | mandatory |
| madgeConfigMCodeVersion OBJECT-TYPE Microcode version of the device. Stored in the format :- first Byte - not used - microcode major version number - microcode minor version number last Byte - microcode debug version number. | 1.3.6.1.4.1.494.10.1.5 | OCTET STRING (SIZE(4)) | read-only | mandatory |
| madgeConfigBCodeVersion OBJECT-TYPE Bootcode version of the device and the hardware version. Stored in the format :- High Byte - hardware version number - bootcode major version number - bootcode minor version number Low Byte - bootcode debug version number. | 1.3.6.1.4.1.494.10.1.6 | OCTET STRING (SIZE(4)) | read-only | mandatory |
| madgeConfigMCodeFilename OBJECT-TYPE Original filename for the microcode that has been downloaded to the device. | 1.3.6.1.4.1.494.10.1.7 | DisplayString | read-only | mandatory |
| madgeConfigDeviceHealth OBJECT-TYPE Current health of the device Normal - everything is fine warning - something the user should be aware of degraded - the box is operating at reduced functionality critical - a major problem exists with the device. | 1.3.6.1.4.1.494.10.1.8 | INTEGER {normal(1), warning(2), degraded(3), critical(4)} | read-only | mandatory |
| madgeConfigAdminStatus OBJECT-TYPE The desired operating mode of the device. The mode can be changed by setting this object. If the device does not support the action it will return a bad value error. The behaviour of these states is device specific and some of the states may latch until the state is returned to normal. normal - standard operating mode / can be used to cancel a download or return the device from any latching state. reboot - force the device to reboot. The device will reboot into the version of flash identified by madgeConfigDefaultFlashVersion. identify - force the device to identify itself by flashing lights. This state may latch. test - force the device to do a self test. This state may latch. erase-config - erase all configuration info erase-flash - erase the version of microcode stored in the flash bank identifed by madgeConfigEraseFlashVersion. tftp-ip - force the device to start a TFTP download over IP tftp-ipx - force the device to start a TFTP download over IPX rpl-ipx - force the device to start a RPL download over IPX rpl-llc - force the device to start a RPL download over LLC | 1.3.6.1.4.1.494.10.1.9 | INTEGER {normal(1), reboot(2), identify(3), test(4), erase-config(5), erase-flash(6), tftp-ip(7), tftp-ipx(8), rpl-ipx(9), rpl-llc(10)} | read-write | mandatory |
| madgeConfigPassword OBJECT-TYPE The case insensitive password for the device. Any GET operation on this object will return PUBLIC. If an attempt is made to set the password to a string greater than the maximum a BAD VALUE error will be returned | 1.3.6.1.4.1.494.10.1.10 | DisplayString (SIZE(0..32)) | read-write | mandatory |
| madgeConfigLinkTest OBJECT-TYPE An object that can be written with any value to test whether a management station knows the correct device password | 1.3.6.1.4.1.494.10.1.11 | INTEGER | read-write | mandatory |
| madgeConfigOperStatus OBJECT-TYPE The current operating mode of the device. normal - standard operating mode reboot - the device is rebooting identify - the device is identifying itself test - the device is performing a self-test downloading - the device is performing a download NOTE:This variable is only available on devices that support version 1.2 or greater of the Box MIB | 1.3.6.1.4.1.494.10.1.12 | INTEGER {normal(1), reboot(2), identify(3), test(4), downloading(5)} | read-only | mandatory |
| madgeConfigEraseFlashVersion OBJECT-TYPE A valid version index for the bank of flash to erase when AdminStatus is set to erase-flash. NOTE:This variable is only available on devices that support version 1.2 or greater of the Box MIB | 1.3.6.1.4.1.494.10.1.13 | INTEGER | read-write | mandatory |
| madgeConfigDefaultFlashVersion OBJECT-TYPE The version index of the default flash bank that a device will reboot into when a standard reboot is performed. NOTE:This variable is only available on devices that support version 1.2 or greater of the Box MIB | 1.3.6.1.4.1.494.10.1.14 | INTEGER | read-write | mandatory |
| madgeSecure OBJECT-IDENTITY | 1.3.6.1.4.1.494.10.2 | |||
| madgeSecureCurrentTableSize OBJECT-TYPE The size of the current users table in the device. A size of zero indicates that the table is not supported. | 1.3.6.1.4.1.494.10.2.1 | INTEGER | read-only | mandatory |
| madgeSecureCurrentTimeout OBJECT-TYPE A time in seconds used to specify how long a management station will remain registered in the Current Users table if no requests are received from that management station. After this time the management station will be automatically removed from the table. Devices are not required to support the writable functionality for this variable. | 1.3.6.1.4.1.494.10.2.2 | INTEGER | read-write | mandatory |
| madgeSecureCurrentTable OBJECT-TYPE A table containing an address for all managers that are currently communicating with this device | 1.3.6.1.4.1.494.10.2.3 | not-accessible | mandatory | |
| madgeSecureCurrentEntry OBJECT-TYPE A entry containing an address for a manager that is currently communicating with this device | 1.3.6.1.4.1.494.10.2.3.1 | not-accessible | mandatory | |
| madgeSecureCurrentIndex OBJECT-TYPE Index into the table | 1.3.6.1.4.1.494.10.2.3.1.1 | INTEGER | read-only | mandatory |
| madgeSecureCurrentType OBJECT-TYPE Identifies the format of the data stored in madgeSecureCurrentAddress not-used - this table entry does not contain valid data ip-address - this table entry contains a valid ip address ipx-address - this table entry contains a valid ipx address mac-address - this table entry contains a valid mac address | 1.3.6.1.4.1.494.10.2.3.1.2 | INTEGER {not-used(1), ip-address(2), ipx-address(3), mac-address(4)} | read-only | mandatory |
| madgeSecureCurrentAddress OBJECT-TYPE An address of a management station that is currently communicating with this device. The format of the address is determined by the associated entry in the madgeSecureCurrentType | 1.3.6.1.4.1.494.10.2.3.1.3 | OCTET STRING | read-only | mandatory |
| madgeSecureCurrentUpdateTime OBJECT-TYPE The time in seconds since the management station identified by this table entry last accessed this device. The table entry will be removed by the device once this UpdateTime reaches the value specified in madgeSecureCurrentTimeout | 1.3.6.1.4.1.494.10.2.3.1.4 | INTEGER | read-only | mandatory |
| madgeSecureCurrentIPAddress OBJECT-TYPE If madgeSecureCurrentType is set to ip-address, this variable returns the madgeSecureCurrentAddress encoded as an IP Address, rather than an Octet String | 1.3.6.1.4.1.494.10.2.3.1.5 | IpAddress | read-only | mandatory |
| madgeSecureAllowedEnabled OBJECT-TYPE Enable / disable the allowed users feature. enabled - only management stations with an address in the AllowedTable will be allowed to get / set MIB variables in this device disabled - any management station is allowed to get / set MIB variables in this device | 1.3.6.1.4.1.494.10.2.4 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| madgeSecureAllowedTableSize OBJECT-TYPE The size of the allowed users table in the device. A size of zero indicates that the table is not supported. | 1.3.6.1.4.1.494.10.2.5 | INTEGER | read-only | mandatory |
| madgeSecureAllowedTable OBJECT-TYPE A table containing an address for all managers that are allowed to get / set MIB variables in this device | 1.3.6.1.4.1.494.10.2.6 | not-accessible | mandatory | |
| madgeSecureAllowedEntry OBJECT-TYPE An entry containing an address for a manager that is allowed to get / set MIB variables in this device | 1.3.6.1.4.1.494.10.2.6.1 | not-accessible | mandatory | |
| madgeSecureAllowedIndex OBJECT-TYPE Index into the table | 1.3.6.1.4.1.494.10.2.6.1.1 | INTEGER | read-only | mandatory |
| madgeSecureAllowedType OBJECT-TYPE Identifies the format of the data stored in madgeSecureAllowedAddress not-used - this table entry does not contain valid data ip-address - this table entry contains a valid ip address ipx-address - this table entry contains a valid ipx address mac-address - this table entry contains a valid mac address | 1.3.6.1.4.1.494.10.2.6.1.2 | INTEGER {not-used(1), ip-address(2), ipx-address(3), mac-address(4)} | read-write | mandatory |
| madgeSecureAllowedAddress OBJECT-TYPE An address of a management station that is allowed to get / set MIB variables in this device The format of the address is determined by the associated entry in the madgeSecureAllowedType | 1.3.6.1.4.1.494.10.2.6.1.3 | OCTET STRING | read-write | mandatory |
| madgeSecureAllowedIPAddress OBJECT-TYPE If madgeSecureAllowedType is set to ip-address, this variable is equivalent to madgeSecureAllowedAddress encoded as an IP Address, rather than an Octet String | 1.3.6.1.4.1.494.10.2.6.1.4 | IpAddress | read-write | mandatory |
| madgeSecureTrapDestEnabled OBJECT-TYPE Enable / disable the trap destination feature. enabled - any SNMP traps generated by this device will only be sent to management stations with an address in the madgeSecureTrapDestTable disabled - any SNMP traps generated by this device will be sent to all management stations currently known by this device. | 1.3.6.1.4.1.494.10.2.7 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| madgeSecureTrapDestTableSize OBJECT-TYPE The size of the trap destinations table in the device. A size of zero indicates that this table is not supported. | 1.3.6.1.4.1.494.10.2.8 | INTEGER | read-only | mandatory |
| madgeSecureTrapDestTable OBJECT-TYPE A table containing the address for all managers that are to receive SNMP traps generated by this device | 1.3.6.1.4.1.494.10.2.9 | not-accessible | mandatory | |
| madgeSecureTrapDestEntry OBJECT-TYPE An entry containing the address for a manager that is to receive SNMP traps generated by this device | 1.3.6.1.4.1.494.10.2.9.1 | not-accessible | mandatory | |
| madgeSecureTrapDestIndex OBJECT-TYPE Index into the table | 1.3.6.1.4.1.494.10.2.9.1.1 | INTEGER | read-only | mandatory |
| madgeSecureTrapDestType OBJECT-TYPE Identifies the format of the data stored in madgeSecureTrapDestAddress not-used - this table entry does not contain valid data ip-address - this table entry contains a valid ip address ipx-address - this table entry contains a valid ipx address mac-address - this table entry contains a valid mac address | 1.3.6.1.4.1.494.10.2.9.1.2 | INTEGER {not-used(1), ip-address(2), ipx-address(3), mac-address(4)} | read-write | mandatory |
| madgeSecureTrapDestAddress OBJECT-TYPE An address for a management station that is to receive any SNMP traps generated by this device. The format of the address is determined by the associated entry in the madgeSecureTrapDestType | 1.3.6.1.4.1.494.10.2.9.1.3 | OCTET STRING | read-write | mandatory |
| madgeSecureTrapDestIPAddress OBJECT-TYPE If madgeSecureTrapDestType is set to ip-address, this variable is equivalent to madgeSecureTrapDestAddress encoded as an IP Address, rather than an Octet String | 1.3.6.1.4.1.494.10.2.9.1.4 | IpAddress | read-write | mandatory |
| madgeDownload OBJECT-IDENTITY | 1.3.6.1.4.1.494.10.3 | |||
| madgeDownloadIPAddress OBJECT-TYPE The IP address of the server to use for the download when using TFTP-IP | 1.3.6.1.4.1.494.10.3.1 | IpAddress | read-write | mandatory |
| madgeDownloadIPGateway OBJECT-TYPE The IP gateway to be used to access the server. If this variable is zero then use the default gateway in madgeConfigIPGateway. | 1.3.6.1.4.1.494.10.3.2 | IpAddress | read-write | mandatory |
| madgeDownloadIPXAddress OBJECT-TYPE The IPX address of the server to use for the download when using TFTP-IPX or RPL-IPX | 1.3.6.1.4.1.494.10.3.3 | OCTET STRING (SIZE(12)) | read-write | mandatory |
| madgeDownloadNodeAddress OBJECT-TYPE The Node address of the server to use for the download when using RPL-LLC | 1.3.6.1.4.1.494.10.3.4 | MacAddress | read-write | mandatory |
| madgeDownloadFileName OBJECT-TYPE The filename of the microcode to download. The maximum length of this string is device specific. If a string that is too long is written to this variable BAD VALUE will be returned. | 1.3.6.1.4.1.494.10.3.5 | DisplayString | read-write | mandatory |
| madgeDownloadDestination OBJECT-TYPE The destination for the download. This will contain the madgeVersionIndex for the download destination. | 1.3.6.1.4.1.494.10.3.6 | INTEGER | read-write | mandatory |
| madgeDownloadState OBJECT-TYPE The current state of the download | 1.3.6.1.4.1.494.10.3.7 | INTEGER {idle(1), tftp-waiting-ip(2), tftp-running-ip(3), tftp-waiting-ipx(4), tftp-running-ipx(5), waiting-xmodem(6), running-xmodem(7), rpl-waiting-ipx(8), rpl-running-ipx(9), rpl-waiting-llc(10), rpl-running-llc(11)} | read-only | mandatory |
| madgeDownloadFailureCode OBJECT-TYPE While a download is in progress this will always be 'no-error'. After a download is complete this indicates the success or failure of the download. If it is anything other than 'no-error' then 'madgedownloadStatusText' will contain a textual description of the error. Error codes from 100 upwards are errors returned from a TFTP server. Errors below this are locally generated. | 1.3.6.1.4.1.494.10.3.8 | INTEGER {no-error(1), config-error(2), busy(3), timeout(4), cancelled(5), incompatible-file(6), file-too-big(7), protocol-error(8), undefined-error(100), file-not-found(101), access-violation(102), out-of-memory(103), illegal-operation(104), unknown-transfer-id(105), file-already-exists(106), no-such-user(107)} | read-only | mandatory |
| madgeDownloadStatusText OBJECT-TYPE A display string describing the status of the download in progress, or the reason for failure of the last download. If FailureCode = no-error then StatusText may be empty. | 1.3.6.1.4.1.494.10.3.9 | DisplayString (SIZE(0..64)) | read-only | mandatory |
| madgeDownloadSize OBJECT-TYPE While a download is in progress this indicates the number of bytes transferred so far. After the download is completed this remains at the final size downloaded. | 1.3.6.1.4.1.494.10.3.10 | INTEGER | read-only | mandatory |
| madgeIP OBJECT-IDENTITY | 1.3.6.1.4.1.494.10.4 | |||
| madgeIPCurrentAddress OBJECT-TYPE The IP address that is currently being used by this device. The IP address could have been obtained from madgeConfigIPAddress or by some other means indicated by madgeIPDiscoveryMethod | 1.3.6.1.4.1.494.10.4.1 | IpAddress | read-only | mandatory |
| madgeIPCurrentGateway OBJECT-TYPE The IP gateway that is currently being used by this device. The IP gateway could have been obtained from madgeConfigIPGateway or by some other means indicated by madgeIPDiscoveryMethod | 1.3.6.1.4.1.494.10.4.2 | IpAddress | read-only | mandatory |
| madgeIPCurrentSubnetMask OBJECT-TYPE The IP Subnet Mask that is currently being used by this device. The IP Subnet Mask could have been obtained from madgeConfigIPSubnetMask or by some other means indicated by madgeIPDiscoveryMethod | 1.3.6.1.4.1.494.10.4.3 | IpAddress | read-only | mandatory |
| madgeIPDiscoveryMethod OBJECT-TYPE The source of the currently used IP address, gateway and subnet mask. | 1.3.6.1.4.1.494.10.4.4 | INTEGER {not-discovered(1), via-config(2), via-bootp(3), via-rarp(4)} | read-only | mandatory |
| madgeIPBootpEnabled OBJECT-TYPE Enable / Disable the use of BootP for IP address discovery | 1.3.6.1.4.1.494.10.4.5 | INTEGER {enabled(1), disabled(2), not-supported(3)} | read-write | mandatory |
| madgeIPRarpEnabled OBJECT-TYPE Enable / Disable the use of Rarp for IP address discovery | 1.3.6.1.4.1.494.10.4.6 | INTEGER {enabled(1), disabled(2), not-supported(3)} | read-write | mandatory |
| madgeVersion OBJECT-IDENTITY | 1.3.6.1.4.1.494.10.5 | |||
| madgeVersionTable OBJECT-TYPE A table containing version information for all hardware / software components in a device. | 1.3.6.1.4.1.494.10.5.1 | not-accessible | mandatory | |
| madgeVersionEntry OBJECT-TYPE An entry containing version information for a hardware / software component in a device. | 1.3.6.1.4.1.494.10.5.1.1 | not-accessible | mandatory | |
| madgeVersionIndex OBJECT-TYPE Index into the table | 1.3.6.1.4.1.494.10.5.1.1.1 | INTEGER | not-accessible | mandatory |
| madgeVersionDescription OBJECT-TYPE A string containing a textual description for the component identified by this entry. | 1.3.6.1.4.1.494.10.5.1.1.2 | DisplayString (SIZE(0..64)) | read-only | mandatory |
| madgeVersionLocation OBJECT-TYPE A string containing a textual description of the location of the component identified by this entry. eg Flash Bank A Flash ROM Boot ROM Boot Bank A Base Hardware Hardware Module | 1.3.6.1.4.1.494.10.5.1.1.3 | DisplayString (SIZE(0..32)) | read-only | mandatory |
| madgeVersionNumber OBJECT-TYPE Version number for the component. Stored in the format :- first Byte - major version number - minor version number last Byte - debug version number. | 1.3.6.1.4.1.494.10.5.1.1.4 | OCTET STRING (SIZE(3)) | read-only | mandatory |
| madgeVersionType OBJECT-TYPE The type of object that this table entry contains version information for. | 1.3.6.1.4.1.494.10.5.1.1.5 | INTEGER {flash(1), boot-fixed(2), boot-updateable(3), hardware-fixed(4), hardware-upgradeable(5), other(6)} | read-only | mandatory |
| madgeVersionCount OBJECT-TYPE The number of entries in the version table | 1.3.6.1.4.1.494.10.5.2 | INTEGER | read-only | mandatory |