MADGERSW-MIB
- Registered at
- 1.3.6.1.4.1.494.4
- Namespace
- cisco
- Source file
MADGERSW-MIB- Digest
sha256:da8f91f1d99e57a51a9c3ce6a9487678269ee7ba8f8e443082169f5e93bf2c01
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
MADGERSW-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| DisplayString type | ||||
| INTEGER48 type | ||||
| LCDText type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| madge OBJECT-IDENTITY | 1.3.6.1.4.1.494 | |||
| ringswitch OBJECT-IDENTITY | 1.3.6.1.4.1.494.4 | |||
| ringswitchBase OBJECT-IDENTITY | 1.3.6.1.4.1.494.4.1 | |||
| ringswitchBasePSFanSpeed OBJECT-TYPE The number of revolutions per minute being reported by the fan internal to the system power supply. If this value is read as zero, the fan is no longer operating | 1.3.6.1.4.1.494.4.1.1 | INTEGER | read-only | mandatory |
| ringswitchBaseExtFanSpeed OBJECT-TYPE The number of revolutions per minute being reported by the external system fan. If this value is read as zero, the fan is no longer operating | 1.3.6.1.4.1.494.4.1.2 | INTEGER | read-only | mandatory |
| ringswitchBaseRipSapSuppression OBJECT-TYPE If this variable is set to enable the system will only forward broadcast-addressed IPX RIP and SAP Response frames to those ports that have recently sourced such a frame. This reduces the number of gratuitous frames sent out on LANs that only have IPX workstations attached. A value of disable causes no special action to be taken for such frames. | 1.3.6.1.4.1.494.4.1.3 | INTEGER {enable(1), disable(2)} | read-write | mandatory |
| ringswitchBaseAREConversion OBJECT-TYPE This variable controls the action taken when forwarding All Routes Explorer frames. enable-first: convert all ARE frames with a RIF length of 2 to STE frames. enable-all: convert all ARE frames to STE frames. enable-bcast-first: convert all ARE frames with the broadcast destination address, with a RIF length of 2 to STE frames. enable-bcast-all: convert all ARE frames with the broadcast destination address to STE frames. disable: follow normal forwarding rules for ARE frames. | 1.3.6.1.4.1.494.4.1.4 | INTEGER {enable-first(1), enable-all(2), enable-bcast-first(3), enable-bcast-all(4), disable(5)} | read-write | mandatory |
| ringswitchPort OBJECT-IDENTITY | 1.3.6.1.4.1.494.4.2 | |||
| ringswitchPortTable OBJECT-TYPE A table that contains general port information. | 1.3.6.1.4.1.494.4.2.1 | not-accessible | mandatory | |
| ringswitchPortEntry OBJECT-TYPE | 1.3.6.1.4.1.494.4.2.1.1 | not-accessible | mandatory | |
| ringswitchPortNum OBJECT-TYPE The port number of the port for which this entry contains Ringswitch management information. | 1.3.6.1.4.1.494.4.2.1.1.1 | INTEGER (1..65535) | read-only | mandatory |
| ringswitchPortRingStatus OBJECT-TYPE The status of the ring to which this port is connected. | 1.3.6.1.4.1.494.4.2.1.1.2 | INTEGER {normal(1), single(2), beaconing(3)} | read-only | mandatory |
| ringswitchPortAdapterStatus OBJECT-TYPE The status of the adapter used by this port. | 1.3.6.1.4.1.494.4.2.1.1.3 | INTEGER {open(1), closed(2), opening(3)} | read-only | mandatory |
| ringswitchPortMediaType OBJECT-TYPE Media type of the port. | 1.3.6.1.4.1.494.4.2.1.1.4 | INTEGER {tr-copper(1), tr-fiber(2), fddi-fiber(3)} | read-only | mandatory |
| ringswitchPortIfMode OBJECT-TYPE Node or concentrator status of the port. | 1.3.6.1.4.1.494.4.2.1.1.5 | INTEGER {node(1), concentrator(2)} | read-write | mandatory |
| ringswitchPortRingSpeed OBJECT-TYPE Speed of the ring to which this port is connected. | 1.3.6.1.4.1.494.4.2.1.1.6 | INTEGER {four(1), sixteen(2), hundred(3)} | read-write | mandatory |
| ringswitchPortTestState OBJECT-TYPE Current state of the bridge test. | 1.3.6.1.4.1.494.4.2.1.1.7 | INTEGER {disabled(1), running(2), failed(3), ok(4), unknown(5)} | read-only | mandatory |
| ringswitchPortTestError OBJECT-TYPE Result of the bridge test. | 1.3.6.1.4.1.494.4.2.1.1.8 | INTEGER {no-error(1), same-ring(2), duplicate-ring(3), fail-nb(4), bad-rnum(5), fail-b(6)} | read-only | mandatory |
| ringswitchPortTestPhase OBJECT-TYPE Current phase of the bridge test. | 1.3.6.1.4.1.494.4.2.1.1.9 | INTEGER {not-running(1), same-ring(2), routed(3), broadcast(4), success(5)} | read-only | mandatory |
| ringswitchPortSummary OBJECT-TYPE This is a three octet field which packs some of the port attributes into a single mib entry. Each nibble represents a different attribute of the port: ifAdminStatus (most significant), ringswitchPortRingStatus, ringswitchPortAdapterStatus, ringswitchPortMediaType, ringswitchPortIfMode, ringswitchPortRingSpeed, ringswitchPortTestState, ringswitchPortTestError (least significant) | 1.3.6.1.4.1.494.4.2.1.1.10 | INTEGER | read-only | mandatory |
| ringswitchPortAddress OBJECT-TYPE The hard wired address of the port. | 1.3.6.1.4.1.494.4.2.1.1.11 | PhysAddress | read-only | mandatory |
| ringswitchPortLAA OBJECT-TYPE The locally administered address of the port. | 1.3.6.1.4.1.494.4.2.1.1.12 | PhysAddress | read-write | mandatory |
| ringswitchPortStationType OBJECT-TYPE Workstations-only status of the port; if this is limited, the port only has workstations on it, and broadcast frames received on this port will not be transmitted on other limited ports. | 1.3.6.1.4.1.494.4.2.1.1.13 | INTEGER {anything(1), workstations(2)} | read-write | mandatory |
| ringswitchPortRPSEnable OBJECT-TYPE Enables or disables the Ring Parameter Server function on the port. If this variable is set to enabled, the port will enable the RPS functional address, and respond to Request Parameters MAC frames, supplying the port's segment number in the response. | 1.3.6.1.4.1.494.4.2.1.1.14 | INTEGER {enable(1), disable(2)} | read-write | mandatory |
| ringswitchPortCutThruEnable OBJECT-TYPE Enables or disables cut-through switching on the port. In some circumstances (e.g., 4 to 16 MB switching), cut-through will always be disabled, irrespective of the state of this variable. | 1.3.6.1.4.1.494.4.2.1.1.15 | INTEGER {enable(1), disable(2)} | read-write | mandatory |
| ringswitchPortInOctets OBJECT-TYPE 48 bit version of the interface MIB counter ifInOctets. | 1.3.6.1.4.1.494.4.2.1.1.16 | INTEGER48 | read-only | mandatory |
| ringswitchPortOutOctets OBJECT-TYPE 48 bit version of the interface MIB counter ifOutOctets. | 1.3.6.1.4.1.494.4.2.1.1.17 | INTEGER48 | read-only | mandatory |
| ringswitchPortSpecInFrames OBJECT-TYPE 48 bit version of the Bridge MIB counter srPortSpecInFrames. | 1.3.6.1.4.1.494.4.2.1.1.18 | INTEGER48 | read-only | mandatory |
| ringswitchPortSpecOutFrames OBJECT-TYPE 48 bit version of the Bridge MIB counter srPortSpecOutFrames. | 1.3.6.1.4.1.494.4.2.1.1.19 | INTEGER48 | read-only | mandatory |
| ringswitchPortApeInFrames OBJECT-TYPE 48 bit version of the Bridge MIB counter srPortApeInFrames. | 1.3.6.1.4.1.494.4.2.1.1.20 | INTEGER48 | read-only | mandatory |
| ringswitchPortApeOutFrames OBJECT-TYPE 48 bit version of the Bridge MIB counter srPortApeOutFrames. | 1.3.6.1.4.1.494.4.2.1.1.21 | INTEGER48 | read-only | mandatory |
| ringswitchPortSteInFrames OBJECT-TYPE 48 bit version of the Bridge MIB counter srPortSteInFrames. | 1.3.6.1.4.1.494.4.2.1.1.22 | INTEGER48 | read-only | mandatory |
| ringswitchPortSteOutFrames OBJECT-TYPE 48 bit version of the Bridge MIB counter srPortSteOutFrames. | 1.3.6.1.4.1.494.4.2.1.1.23 | INTEGER48 | read-only | mandatory |
| ringswitchSR OBJECT-IDENTITY | 1.3.6.1.4.1.494.4.3 | |||
| ringswitchSRAdminState OBJECT-TYPE The desired state of source routing; allows source routing to be enabled or disabled for the whole Ringswitch | 1.3.6.1.4.1.494.4.3.1 | INTEGER {enable(1), disable(2)} | read-write | mandatory |
| ringswitchSROperState OBJECT-TYPE The actual state of source routing. If ringswitchSRAdminState is 'disabled' then this state will be inactive. If ringswitchSRAdminState is 'enabled' then this state should be 'active', but if for some reason the Ringswitch is unable to perform source routing then this state will be 'inactive'. | 1.3.6.1.4.1.494.4.3.2 | INTEGER {active(1), inactive(2)} | read-only | mandatory |
| ringswitchLCD OBJECT-IDENTITY | 1.3.6.1.4.1.494.4.4 | |||
| ringswitchLCDTotalDisplays OBJECT-TYPE The total number of displays on the Ringswitch. | 1.3.6.1.4.1.494.4.4.1 | INTEGER (1..65535) | read-only | mandatory |
| ringswitchLCDCurrentDisplay OBJECT-TYPE The number of the display that the Ringswitch is currently showing. | 1.3.6.1.4.1.494.4.4.2 | INTEGER (1..65535) | read-write | mandatory |
| ringswitchLCDCurrentMsgText OBJECT-TYPE The actual lcd message text, including a carriage return after the first line, and a null character after the second line. | 1.3.6.1.4.1.494.4.4.3 | LCDText | read-only | mandatory |
| ringswitchLCDTable OBJECT-TYPE A table that contains all of the lcd messages that could be displayed by the Ringswitch if the user were to flick the paddle switch. | 1.3.6.1.4.1.494.4.4.4 | not-accessible | mandatory | |
| ringswitchLCDTableEntry OBJECT-TYPE Arguments and message number details for each LCD entry. | 1.3.6.1.4.1.494.4.4.4.1 | not-accessible | mandatory | |
| ringswitchLCDNum OBJECT-TYPE The lcd number of the lcd for which this entry contains display details. | 1.3.6.1.4.1.494.4.4.4.1.1 | INTEGER (1..65535) | read-only | mandatory |
| ringswitchLCDMsgText OBJECT-TYPE The actual lcd message text, including a carriage return after the first line, and a null character after the second line. | 1.3.6.1.4.1.494.4.4.4.1.2 | LCDText | read-only | mandatory |
| ringswitchLAN OBJECT-IDENTITY | 1.3.6.1.4.1.494.4.5 | |||
| ringswitchLANTable OBJECT-TYPE A table that contains virtual LAN information configured into the Ringswitch by the network administrator. | 1.3.6.1.4.1.494.4.5.1 | not-accessible | mandatory | |
| ringswitchLANEntry OBJECT-TYPE Name and status information associated with each virtual LAN entry. | 1.3.6.1.4.1.494.4.5.1.1 | not-accessible | mandatory | |
| ringswitchLANIndex OBJECT-TYPE The virtual LAN number for which this entry contains virtual LAN details. | 1.3.6.1.4.1.494.4.5.1.1.1 | INTEGER (1..65535) | read-only | mandatory |
| ringswitchLANName OBJECT-TYPE The name that the administrator has given this virtual LAN. | 1.3.6.1.4.1.494.4.5.1.1.2 | DisplayString | read-write | mandatory |
| ringswitchLANPermeable OBJECT-TYPE In an 'impermeable' group, broadcast frames which were received on a port in the group, but were not originated in the group, are discarded. In a 'permeable' group, such frames are transmitted on the other ports in the group. | 1.3.6.1.4.1.494.4.5.1.1.3 | INTEGER {impermeable(1), permeable(2)} | read-write | mandatory |
| ringswitchLANStatus OBJECT-TYPE The current status of this virtual LAN, a status of 'invalid' indicates that the virtual LAN's associated name and ring list are meaningless until the group is validated. | 1.3.6.1.4.1.494.4.5.1.1.4 | INTEGER {valid(1), invalid(2)} | read-write | mandatory |
| ringswitchLANRingTable OBJECT-TYPE A table that contains the rings associated with a virtual LAN that has been configured into the Ringswitch by the network administrator. | 1.3.6.1.4.1.494.4.5.2 | not-accessible | mandatory | |
| ringswitchLANRingEntry OBJECT-TYPE Name and status information associated with each virtual LAN ring table entry. | 1.3.6.1.4.1.494.4.5.2.1 | not-accessible | mandatory | |
| ringswitchLANRingGroup OBJECT-TYPE The virtual LAN index for which this entry contains virtual LAN ring details. | 1.3.6.1.4.1.494.4.5.2.1.1 | INTEGER | read-only | mandatory |
| ringswitchLANRingIndex OBJECT-TYPE The ring index for which this entry contains virtual LAN ring details. | 1.3.6.1.4.1.494.4.5.2.1.2 | INTEGER | read-only | mandatory |
| ringswitchLANRingNum OBJECT-TYPE The ring number contained in the virtual LAN. | 1.3.6.1.4.1.494.4.5.2.1.3 | INTEGER | read-write | mandatory |
| ringswitchLANRingStatus OBJECT-TYPE The current status of this virtual LAN ring entry, a status of 'invalid' indicates that the ring entry is not in use and the associated ring number is meaningless. | 1.3.6.1.4.1.494.4.5.2.1.4 | INTEGER {valid(1), invalid(2)} | read-write | mandatory |
Notifications
| Name | OID | Status |
|---|---|---|
| fanPSSpeedFailed NOTIFICATION-TYPE This trap is sent when the Power Supply fan has failed. | 1.3.6.1.4.1.494.4.0.1 | |
| fanExtSpeedFailed NOTIFICATION-TYPE This trap is sent when the external fan has failed. | 1.3.6.1.4.1.494.4.0.2 | |
| portFailed NOTIFICATION-TYPE This trap is sent when a port has auto-closed or failed to open. | 1.3.6.1.4.1.494.4.0.3 | |
| brTestFailed NOTIFICATION-TYPE This trap is sent when the bridge test on a port fails. | 1.3.6.1.4.1.494.4.0.4 |