MIBs Depot

Juniper-POLICY-MIB

Registered at
1.3.6.1.4.1.4874.2.2.27
Last updated
2005-08-08 18:21
Organization
Juniper Networks, Inc.
Revisions
2005-08-08 18:21, 2005-02-01 15:58, 2003-10-21 19:05, 2003-08-25 21:55, 2003-03-13 21:55, 2002-09-16 21:44, 2002-03-28 14:53, 2001-09-07 14:48, 2001-04-17 12:10, 2001-01-23 21:30, 2000-11-29 20:30, 2000-05-15 00:00
Namespace
juniper
Source file
Juniper-POLICY-MIB
Digest
sha256:bf44add92ba5799a664127a03dfa2890ccd1b13cbf1af1f4c75e7153e9d22f14

Description

The Policy MIB for the Juniper Networks enterprise.

Contact

Juniper Networks, Inc. Postal: 10 Technology Park Drive Westford, MA 01886-3146 USA Tel: +1 978 589 5800 Email: mib@Juniper.net

Imports

FromSymbols
IF-MIBInterfaceIndex
Juniper-MIBsjuniMibs
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
Juniper-MIBs
Juniper-POLICY-MIB
Juniper-UNI-SMI
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
JuniClaclPortOperator
TEXTUAL-CONVENTION
Enumerates valid operators for use as source and destination port operators within a classifier control list.
current
JuniPolicyAttachmentType
TEXTUAL-CONVENTION
Enumerates the types of policy attachments.
current
JuniPolicyForwardingType
TEXTUAL-CONVENTION
Enumerates the type of forwarding to which the policy is applied.
current
JuniPolicyIpFragValue
TEXTUAL-CONVENTION
Enumerates the values for IP frag offset classification.
current
JuniRateLimitProfileType
TEXTUAL-CONVENTION
Enumerates the types of rate limit profiles.
current

Objects

NameOIDSyntaxAccessStatus
juniPolicyObjects
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.27.1
juniClassifierControlList
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.27.1.1
juniClassifierControlListNextIndex
OBJECT-TYPE
This scalar object returns the index of the next available row in the juniClassifierControlListTable. This object returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that index allocation is unintended.
1.3.6.1.4.1.4874.2.2.27.1.1.1Integer32 (0..2147483647)read-onlycurrent
juniClassifierControlListTable
OBJECT-TYPE
This table contains entries for elements of classifier control lists. The details pertinent to each CLACL are found in the juniClassifierControlDefTable.
1.3.6.1.4.1.4874.2.2.27.1.1.2not-accessiblecurrent
juniClassifierControlListEntry
OBJECT-TYPE
Each entry describes the characteristics of an IP access list element.
1.3.6.1.4.1.4874.2.2.27.1.1.2.1not-accessiblecurrent
juniClassifierControlListId
OBJECT-TYPE
The number of the classifier control list to which this entry belongs.
1.3.6.1.4.1.4874.2.2.27.1.1.2.1.1Integer32 (0..2147483647)not-accessiblecurrent
juniClassifierControlListRowStatus
OBJECT-TYPE
Controls creation/deletion of conceptual rows within this table. Modes supported are create-and-go and destroy. To create an entry in this table, the following entry objects MUST be explicitly configured: juniClassifierControlListRowStatus juniClassifierControlListElemId
1.3.6.1.4.1.4874.2.2.27.1.1.2.1.3RowStatusread-createcurrent
juniClassifierControlListName
OBJECT-TYPE
The name of the CLACL being defined.
1.3.6.1.4.1.4874.2.2.27.1.1.2.1.4DisplayString (SIZE(1..40))read-createcurrent
juniClassifierControlListReferenceCount
OBJECT-TYPE
Number of times this CLACL is referenced by policies.
1.3.6.1.4.1.4874.2.2.27.1.1.2.1.5Counter32read-onlycurrent
juniClassifierControlListNextElementIndex
OBJECT-TYPE
Each get of this object will return a unique index which may be used to create classifier control list elements. This object returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that index allocation is unintended.
1.3.6.1.4.1.4874.2.2.27.1.1.2.1.6Integer32 (0..2147483647)read-onlycurrent
juniClassifierControlListElementTable
OBJECT-TYPE
This table contains entries for elements of classifier control lists. Entries belonging to the same control list are ordered, and comparisons to those entries are performed in that order until a match is detected. If no match is found, the default action is to 'deny'.
1.3.6.1.4.1.4874.2.2.27.1.1.4not-accessiblecurrent
juniClassifierControlListElementEntry
OBJECT-TYPE
Each entry describes the characteristics of an IP access list element.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1not-accessiblecurrent
juniClassifierControlListElemId
OBJECT-TYPE
The relative position of this entry within its classifier control list. Classifier control list entries are searched in this sequence (low to high values) until a match is found.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.1Integer32 (0..2147483647)not-accessiblecurrent
juniClassifierControlListElemRowStatus
OBJECT-TYPE
Controls creation/deletion of conceptual rows within this table. This table provides a partial implementation for rowStatus. Rows may be created using createAndGo and createAndWait. Once a row has been made active the row status may not be changed.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.2RowStatusread-createcurrent
juniClassifierControlListNotSrc
OBJECT-TYPE
Invert the meaning of the source IP address and mask objects. For example 'not 10.10.0.90/255.255.255.255 (host address)' would result in all source addresses except for host 10.19.9.90 being matched.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.3TruthValueread-createcurrent
juniClassifierControlListSrc
OBJECT-TYPE
A source IP address. A subject IP address is first masked with the value of juniClassifierControlListSrcMask, then the result is compared to this value. Setting both this object and its corresponding mask to 0.0.0.0 acts as a wildcard, matching any source IP address.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.4IpAddressread-createcurrent
juniClassifierControlListSrcMask
OBJECT-TYPE
The IP address mask to be applied to a subject source IP address before comparing it to juniClassifierControlListSrc. Ones in the mask identify which bits in the subject IP address are significant for the comparison. To be considered valid, a nonzero value for this object must contain a single contiguous string of ones, beginning with the most significant bit of the mask.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.5IpAddressread-createcurrent
juniClassifierControlListNotDst
OBJECT-TYPE
Invert the meaning of the destination IP address and mask objects. For example, 'not 10.10.0.90/255.255.255.255 (host address)' would result in all source addresses except for host 10.19.9.90 being matched.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.6TruthValueread-createcurrent
juniClassifierControlListDst
OBJECT-TYPE
A destination IP address. A subject IP address is first masked with the value of juniClassifierControlListDstMask, then the result is compared to this value. Setting both this object and its corresponding mask to 0.0.0.0 acts as a wildcard, matching any destination IP address.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.7IpAddressread-createcurrent
juniClassifierControlListDstMask
OBJECT-TYPE
The IP address mask to be applied to a subject destination IP address before comparing it to juniClassifierControlListDst. Ones in the mask identify which bits in the IP address are significant for the comparison. To be considered valid, a nonzero value for this object must contain a single contiguous string of ones, beginning with the most significant bit of the mask.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.8IpAddressread-createcurrent
juniClassifierControlListNotProtocol
OBJECT-TYPE
Invert the meaning of the protocol object. For example, 'not TCP' matches any protocol except for TCP.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.9TruthValueread-createcurrent
juniClassifierControlListProtocol
OBJECT-TYPE
An IP Protocol value. Nonzero values match a specific IP Protocol value (e.g. 6 for TCP) carried in an IP packet; a value of zero acts as a wildcard, matching any IP Protocol.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.10Integer32 (0..255)read-createcurrent
juniClassifierControlListTosByte
OBJECT-TYPE
The IP TOS byte value to match.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.11Integer32 (0..255)read-createcurrent
juniClassifierControlListMask
OBJECT-TYPE
The mask to use for TOS byte checks. Allowed values are 0, 224, 252, 255.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.12Integer32 (0..255)read-createcurrent
juniClassifierControlListSrcOperator
OBJECT-TYPE
Operator for use in comparing source ports.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.13JuniClaclPortOperatorread-createcurrent
juniClassifierControlListSrcFromPort
OBJECT-TYPE
Source UDP or TCP 'from' port number.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.14Integer32 (0..65535)read-createcurrent
juniClassifierControlListSrcToPort
OBJECT-TYPE
Source UDP or TCP 'to' port number.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.15Integer32 (0..65535)read-createcurrent
juniClassifierControlListDestOperator
OBJECT-TYPE
Operator for use in comparing Destination ports.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.16JuniClaclPortOperatorread-createcurrent
juniClassifierControlListDestFromPort
OBJECT-TYPE
Destination UDP or TCP 'from' port number.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.17Integer32 (0..65535)read-createcurrent
juniClassifierControlListDestToPort
OBJECT-TYPE
Destination UDP or TCP 'to' port number.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.18Integer32 (0..65535)read-createcurrent
juniClassifierControlListICMPType
OBJECT-TYPE
Optional ICMP message type for classification.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.19Integer32 (0..255)read-createcurrent
juniClassifierControlListICMPCode
OBJECT-TYPE
Optional ICMP message code for classification.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.20Integer32 (0..255)read-createcurrent
juniClassifierControlListIGMPType
OBJECT-TYPE
Optional IGMP message type for classification.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.21Integer32 (0..255)read-createcurrent
juniClassifierControlListTcpFlagsValue
OBJECT-TYPE
Optional TCP flags value for classification.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.22Integer32 (0..63)read-createcurrent
juniClassifierControlListTcpFlagsMask
OBJECT-TYPE
Optional TCP flags mask for classification. TCP flag bits not specified in the mask are don't care bits.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.23Integer32 (0..63)read-createcurrent
juniClassifierControlListIpFlagsValue
OBJECT-TYPE
Optional IP flags value for classification.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.24Integer32 (0..7)read-createcurrent
juniClassifierControlListIpFlagsMask
OBJECT-TYPE
Optional IP flags mask for classification. IP flag bits not specified in the mask are don't care bits
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.25Integer32 (0..7)read-createcurrent
juniClassifierControlListIpFragValue
OBJECT-TYPE
Optional IP flags mask for classification. IP flag bits not specified in the mask are don't care bits
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.26JuniPolicyIpFragValueread-createcurrent
juniClassifierControlListLocal
OBJECT-TYPE
Match IP packets that are locally destined, i.e., destined to any one of router's interfaces.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.27TruthValueread-createcurrent
juniClassifierControlListLocalPresent
OBJECT-TYPE
Set to true if local classification field is configured.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.28TruthValueread-createcurrent
juniClassifierControlListSaRouteClass
OBJECT-TYPE
Match packets with source address route class matching this route class. The route class value of a packet can be determined in the secondary input policy attachment stage only. The route class value of a packet is assigned the value 0 in the input and output policy attachment stages.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.29Integer32 (0..255)read-createcurrent
juniClassifierControlListSaRouteClassPresent
OBJECT-TYPE
Set to true if SA route class classification field is configured.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.30TruthValueread-createcurrent
juniClassifierControlListDaRouteClass
OBJECT-TYPE
Match packets with destination address route class matching this route class. The route class value of a packet can be determined in the secondary input policy attachment stage only. The route class value of a packet is assigned the value 0 in the input and output policy attachment stages.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.31Integer32 (0..255)read-createcurrent
juniClassifierControlListDaRouteClassPresent
OBJECT-TYPE
Set to true if DA route class classification field is configured.
1.3.6.1.4.1.4874.2.2.27.1.1.4.1.32TruthValueread-createcurrent
juniRateLimitControlList
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.27.1.2
juniRateLimitProfileNextIndex
OBJECT-TYPE
This scalar object returns the index of the next available row in the juniRateLimitProfileTable. This object returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that index allocation is unintended.
1.3.6.1.4.1.4874.2.2.27.1.2.1Integer32 (0..2147483647)read-onlycurrent
juniRateLimitProfileTable
OBJECT-TYPE
This table contains entries for elements of Rate Limit Profile (RLP) definitions.
1.3.6.1.4.1.4874.2.2.27.1.2.2not-accessiblecurrent
juniRateLimitProfileEntry
OBJECT-TYPE
Each entry describes the characteristics of a rate limit profile element.
1.3.6.1.4.1.4874.2.2.27.1.2.2.1not-accessiblecurrent
juniRateLimitProfileId
OBJECT-TYPE
The ID number of the rate limit profile (RLP) entry which is defined by this row.
1.3.6.1.4.1.4874.2.2.27.1.2.2.1.1Integer32 (0..2147483647)not-accessiblecurrent
juniRateLimitProfileRowStatus
OBJECT-TYPE
Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configured: juniRateLimitProfileName. The rowStatus must be set to notInService in order to modify an entry in this table. After making the desired changes you should set the rowStatus to active to apply the changes.
1.3.6.1.4.1.4874.2.2.27.1.2.2.1.2RowStatusread-writecurrent
juniRateLimitProfileName
OBJECT-TYPE
Specifies the name of the rate limit profile defined by this row.
1.3.6.1.4.1.4874.2.2.27.1.2.2.1.3DisplayString (SIZE(1..40))read-writecurrent
juniRateLimitReferenceCount
OBJECT-TYPE
This object reflects the number of times a rate limit profile object is referenced by policies.
1.3.6.1.4.1.4874.2.2.27.1.2.2.1.4Counter32read-onlycurrent
juniRateLimitCommittedBps
OBJECT-TYPE
The committed access rate in bits per second.
1.3.6.1.4.1.4874.2.2.27.1.2.2.1.5Unsigned32read-writecurrent
juniRateLimitCommittedBurst
OBJECT-TYPE
The committed access rate burst value in bytes.
1.3.6.1.4.1.4874.2.2.27.1.2.2.1.6Unsigned32read-writecurrent
juniRateLimitExceedBps
OBJECT-TYPE
The peak access rate in bits per second. To be configured only if rate limit profile type is two-rate.
1.3.6.1.4.1.4874.2.2.27.1.2.2.1.7Unsigned32read-writecurrent
juniRateLimitExceedBurst
OBJECT-TYPE
The peak access rate burst value in bytes. To be configured only if rate limit profile type is two-rate.
1.3.6.1.4.1.4874.2.2.27.1.2.2.1.8Unsigned32read-writecurrent
juniRateLimitCommittedAction
OBJECT-TYPE
Action to be taken when the access rate is within the bounds of the committed access rate.
1.3.6.1.4.1.4874.2.2.27.1.2.2.1.9INTEGER {transmit(0), drop(1), mark(2)}read-writecurrent
juniRateLimitConformedAction
OBJECT-TYPE
Action to be taken when the access rate exceeds the bounds of the committed access rate.
1.3.6.1.4.1.4874.2.2.27.1.2.2.1.10INTEGER {transmit(0), drop(1), mark(2)}read-writecurrent
juniRateLimitExceededAction
OBJECT-TYPE
Action to be taken when the access rate exceeds the bounds of the peak access rate.
1.3.6.1.4.1.4874.2.2.27.1.2.2.1.11INTEGER {transmit(0), drop(1), mark(2)}read-writecurrent
juniRateLimitCommittedMarkVal
OBJECT-TYPE
New IP precedence to be used when the juniRateLimitCommittedAction mark action is applied.
1.3.6.1.4.1.4874.2.2.27.1.2.2.1.12Integer32read-writecurrent
juniRateLimitConformedMarkVal
OBJECT-TYPE
New IP prececence to be used when the juniRateLimitExceedCommittedAction mark action is applied.
1.3.6.1.4.1.4874.2.2.27.1.2.2.1.13Integer32read-writecurrent
juniRateLimitExceededMarkVal
OBJECT-TYPE
New IP precedence to be used when the juniRateLimitExceedPeakAction mark action is applied.
1.3.6.1.4.1.4874.2.2.27.1.2.2.1.14Integer32read-writecurrent
juniRateLimitMask
OBJECT-TYPE
Mask to be applied when executing a mark action.
1.3.6.1.4.1.4874.2.2.27.1.2.2.1.15Unsigned32 (0..255)read-writecurrent
juniRateLimitProfileType
OBJECT-TYPE
The rate limit profile type (i.e. one-rate or two-rate). Defaults to two-rate, if not specified.
1.3.6.1.4.1.4874.2.2.27.1.2.2.1.16JuniRateLimitProfileTyperead-writecurrent
juniRateLimitExcessBurst
OBJECT-TYPE
The excess committed access rate burst value in bytes. To be configured only if rate limit profile type is one-rate.
1.3.6.1.4.1.4874.2.2.27.1.2.2.1.17Unsigned32read-writecurrent
juniPolicy
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.27.1.3
juniPolicyNextIndex
OBJECT-TYPE
This scalar object returns the index of the next available row in the juniPolicyTable. This object returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that index allocation is unintended.
1.3.6.1.4.1.4874.2.2.27.1.3.1Integer32 (0..2147483647)read-onlycurrent
juniPolicyTable
OBJECT-TYPE
This table contains entries which represent the non-repetive fields of a policy definition.
1.3.6.1.4.1.4874.2.2.27.1.3.2not-accessiblecurrent
juniPolicyEntry
OBJECT-TYPE
Each entry contains the non-repetitive fields of a policy definition.
1.3.6.1.4.1.4874.2.2.27.1.3.2.1not-accessiblecurrent
juniPolicyId
OBJECT-TYPE
The number of the policy table entry which is defined by this row.
1.3.6.1.4.1.4874.2.2.27.1.3.2.1.1Integer32 (0..2147483647)not-accessiblecurrent
juniPolicyRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy *** LIMITED ACCESS LIST CONFIGURATION LEVEL *** RowStatus createAndGo/destroy operations have the following special-purpose semantics: createAndGo Create an entry having the specified configuration and append it to the target list, i.e. create a policy table entry with the associated policy name. destroy Destroy the specified list and all of its constituent elements. Policy row members may not be modified once the row has been created.
1.3.6.1.4.1.4874.2.2.27.1.3.2.1.2RowStatusread-createcurrent
juniPolicyAdminState
OBJECT-TYPE
This object is used to control the administrative state of a policy. Enabling a policy will result in the rules which make up a policy being applied to interfaces to which the policy is assigned. You should disable the admin state before adding/modifying any rules or classifier groups in this policy and then re-enable to apply the changes. This object may be modified while the row is active.
1.3.6.1.4.1.4874.2.2.27.1.3.2.1.3INTEGER {disable(0), enable(1)}read-createcurrent
juniPolicyOperStatus
OBJECT-TYPE
This obsolete object was used to retrieve the operational state of a policy. If a policy is disabled, it is not applied to any interfaces within the system. If a policy is invalid, there is a problem with the policy preventing it from being applied to an interface. An error code providing diagnostic information about the problem is found in juniPolicyErrorValue. If a policy is enabled, it has been applied to one or more interfaces within the system. This object was made obsolete due to some changes in E-Series which eliminated the possibility of a policy being operationaly disabled.
1.3.6.1.4.1.4874.2.2.27.1.3.2.1.4INTEGER {disabled(0), invalid(1), enabled(2)}read-onlyobsolete
juniPolicyErrorValue
OBJECT-TYPE
An error code providing diagnostic information for invalid policies. The enumeration of this field is TBD. A zero (0) value indicates that there is no error reported. This object was made obsolete due to some changes in E-Series which eliminated the possibility of a policy being operationaly disabled.
1.3.6.1.4.1.4874.2.2.27.1.3.2.1.5Integer32read-onlyobsolete
juniPolicyName
OBJECT-TYPE
Specifies the name of the policy defined by this row.
1.3.6.1.4.1.4874.2.2.27.1.3.2.1.6DisplayString (SIZE(1..40))read-createcurrent
juniPolicyReferenceCount
OBJECT-TYPE
Reflects the number of times this policy has been applied within the chassis.
1.3.6.1.4.1.4874.2.2.27.1.3.2.1.7Counter32read-onlycurrent
juniPolicyRuleNextIndex
OBJECT-TYPE
Read only variable which provides the next available PolicyRuleIndex with respect to the policy defined by this row. This object returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that index allocation is unintended.
1.3.6.1.4.1.4874.2.2.27.1.3.2.1.8Integer32 (0..2147483647)read-onlycurrent
juniPolicyAtmCellModeEnable
OBJECT-TYPE
Specifies whether the policy is in ATM Cell Mode.
1.3.6.1.4.1.4874.2.2.27.1.3.2.1.9TruthValueread-createcurrent
juniPolicyRuleTable
OBJECT-TYPE
Each entry within this table defines a rule component of a policy. The entries in this table are created automatically when entries are created in specific rule tables. This table is read only. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.3not-accessibledeprecated
juniPolicyRuleEntry
OBJECT-TYPE
Each entry defines a single rule component. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.3.1not-accessibledeprecated
juniPolicyRulePolicyId
OBJECT-TYPE
The PolicyTable index of the policy which owns this rule. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.3.1.1Integer32 (0..2147483647)not-accessibledeprecated
juniPolicyRulePrec
OBJECT-TYPE
The precedence of this rule within this group of policy rules. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.3.1.2Integer32 (0..2147483647)not-accessibledeprecated
juniPolicyRuleId
OBJECT-TYPE
The index of this rule within the set of rules owned by the policy defined by juniPolicyRulePolicyId. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.3.1.3Integer32 (0..2147483647)not-accessibledeprecated
juniPolicyRuleType
OBJECT-TYPE
This field specifies the type of rule being defined. The remaining information which makes up this rule is found in the specific rule table defined by juniPolicyRuleType. The specific rule tables are indexed by juniPolicyRulePolicyId.juniPolicyRuleId. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.3.1.4INTEGER {noRule(0), nextHopRule(1), filterRule(2), nextInterfaceRule(3), rateLimitRule(4), markingRule(5), trafficClassRule(6), forwardRule(7), logRule(8), colorRule(10), exceptionRule(11)}read-onlydeprecated
juniPolicySuspend
OBJECT-TYPE
Setting this object to true results in the rule being suspended (taken out of service). Setting this value to false results in the rule being returned to service. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.3.1.5TruthValueread-writedeprecated
juniPolicyEclipsed
OBJECT-TYPE
This value is true if the policy rule is eclipsed. A policy rule is eclipsed if a conflicting rule with the same classifier control list precedes the rule, and the preceding rule is not suspended. A false value indicates that the rule is not eclipsed. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.3.1.6TruthValueread-onlydeprecated
juniNextHopRuleTable
OBJECT-TYPE
A list of entries which provide next-hop rule data. Rows created in this table result in an entry being created in the policy rule table. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.4not-accessibledeprecated
juniNextHopRuleEntry
OBJECT-TYPE
A next-hop rule entry. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.4.1not-accessibledeprecated
juniNextHopRowStatus
OBJECT-TYPE
Controls creation/deletion of conceptual rows within this table. The next-hop IP address is mandatory and must be specified. Modes supported are create-and-go and destroy. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.4.1.1RowStatusread-createdeprecated
juniNextHopIpAddress
OBJECT-TYPE
The IP address to forward all packets to. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.4.1.2IpAddressread-createdeprecated
juniNextHopClaclId
OBJECT-TYPE
The classifier control list ID which completes the NextHop policy rule. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.4.1.3Integer32 (0..2147483647)read-createdeprecated
juniFilterRuleTable
OBJECT-TYPE
A list of entries which provide filter rule data. Creation of an entry in this table results in a corresponding entry being created in the policy rule table. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.5not-accessibledeprecated
juniFilterRuleEntry
OBJECT-TYPE
A filter rule entry. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.5.1not-accessibledeprecated
juniFilterRowStatus
OBJECT-TYPE
Controls creation/deletion of conceptual rows within this table. Modes supported are create-and-go and destroy. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.5.1.1RowStatusread-createdeprecated
juniFilterClaclId
OBJECT-TYPE
The classifier control list ID which completes the filter policy rule. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.5.1.2Integer32 (0..2147483647)read-createdeprecated
juniNextInterfaceRuleTable
OBJECT-TYPE
A list of entries which provide NextInterface rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.6not-accessibledeprecated
juniNextInterfaceRuleEntry
OBJECT-TYPE
A NextInterface rule entry. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.6.1not-accessibledeprecated
juniNextInterfaceRowStatus
OBJECT-TYPE
Controls creation/deletion of conceptual rows within this table. The next-interface parameter is mandatory and must be specified. Modes supported are create-and-go and destroy. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.6.1.1RowStatusread-createdeprecated
juniNextInterfaceId
OBJECT-TYPE
The interface index to which traffic matching the CLACL ID will be routed. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.6.1.2InterfaceIndexread-createdeprecated
juniNextInterfaceClaclId
OBJECT-TYPE
The classifier control list ID which completes the NextInterface policy rule. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.6.1.3Integer32 (0..2147483647)read-createdeprecated
juniNextInterfaceNextHop
OBJECT-TYPE
The IP address to forward all packets to. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.6.1.4IpAddressread-createdeprecated
juniRateLimitRuleTable
OBJECT-TYPE
A list of entries which provide RateLimit rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.7not-accessibledeprecated
juniRateLimitRuleEntry
OBJECT-TYPE
A RateLimit rule entry. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.7.1not-accessibledeprecated
juniRateLimitRowStatus
OBJECT-TYPE
Controls creation/deletion of conceptual rows within this table. The rate limit profile ID is mandatory and must be specified. Modes supported are create-and-go and destroy. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.7.1.1RowStatusread-createdeprecated
juniRateLimitId
OBJECT-TYPE
The RLP ID which provides the rate limit data which completes the RateLimit policy rule. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.7.1.2Integer32 (0..2147483647)read-createdeprecated
juniRateLimitClaclId
OBJECT-TYPE
The classifier control list ID which fills out the RateLimit policy rule. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.7.1.3Integer32 (0..2147483647)read-createdeprecated
juniMarkingRuleTable
OBJECT-TYPE
A list of entries which provide Marking rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.8not-accessibledeprecated
juniMarkingRuleEntry
OBJECT-TYPE
A Marking rule entry. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.8.1not-accessibledeprecated
juniMarkingRowStatus
OBJECT-TYPE
Controls creation/deletion of conceptual rows within this table. The IP precedence field is mandatory and must be specified. Modes supported are create-and-go and destroy. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.8.1.1RowStatusread-createdeprecated
juniMarkingTOSByte
OBJECT-TYPE
The IP precedence value associated with this policy rule. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.8.1.2Integer32 (0..255)read-createdeprecated
juniMarkingMask
OBJECT-TYPE
The mask to use for TOS byte checks. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.8.1.3Integer32 (0..255)read-createdeprecated
juniMarkingClaclId
OBJECT-TYPE
The classifier control list ID which fills out the Marking policy rule. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.8.1.4Integer32 (0..2147483647)read-createdeprecated
juniForwardRuleTable
OBJECT-TYPE
A list of entries which provide forward rule data. Creation of an entry in this table results in a corresponding entry being created in the policy rule table. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.9not-accessibledeprecated
juniForwardRuleEntry
OBJECT-TYPE
A forward rule entry. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.9.1not-accessibledeprecated
juniForwardRowStatus
OBJECT-TYPE
Controls creation/deletion of conceptual rows within this table. Modes supported are create-and-go and destroy. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.9.1.1RowStatusread-createdeprecated
juniForwardClaclId
OBJECT-TYPE
The classifier control list ID which completes the forward policy rule. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.9.1.2Integer32 (0..2147483647)read-createdeprecated
juniForwardNextInterfaceId
OBJECT-TYPE
The interface index to which traffic matching the CLACL ID will be routed. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.9.1.3InterfaceIndexread-createdeprecated
juniForwardNextHop
OBJECT-TYPE
The IP address to which all packets are forwarded. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.9.1.4IpAddressread-createdeprecated
juniForwardRouterId
OBJECT-TYPE
The index or ID of the router. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.9.1.5Integer32 (0..2147483647)read-onlydeprecated
juniForwardOrder
OBJECT-TYPE
The order of the forward rules for a given classifier within a policy. The forward rules will be ordered from the lowest order value to the highest. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.9.1.6Integer32 (1..32767)read-createdeprecated
juniForwardIgnoreDefaultRoute
OBJECT-TYPE
Setting this object to true results in the default route being ignored when determining if a next hop address is reachable. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.9.1.7TruthValueread-createdeprecated
juniTrafficShapeRuleTable
OBJECT-TYPE
Obsolete list of entries which provide Traffic Shape rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table. This list became obsolete when the policy shaper capability was moved into the quality of service component.
1.3.6.1.4.1.4874.2.2.27.1.3.10not-accessibleobsolete
juniTrafficShapeRuleEntry
OBJECT-TYPE
A TrafficShape rule entry.
1.3.6.1.4.1.4874.2.2.27.1.3.10.1not-accessibleobsolete
juniTrafficShapeRowStatus
OBJECT-TYPE
Controls creation/deletion of conceptual rows within this table. The traffic shape profile ID is mandatory and must be specified. Modes supported are create-and-go and destroy.
1.3.6.1.4.1.4874.2.2.27.1.3.10.1.1RowStatusread-createobsolete
juniTrafficShapeId
OBJECT-TYPE
The RLP ID which provides the rate limit data which completes the traffic shape policy rule.
1.3.6.1.4.1.4874.2.2.27.1.3.10.1.2Integer32 (0..2147483647)read-createobsolete
juniColorRuleTable
OBJECT-TYPE
A list of entries which provide Color rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.11not-accessibledeprecated
juniColorRuleEntry
OBJECT-TYPE
A Color rule entry. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.11.1not-accessibledeprecated
juniColorRowStatus
OBJECT-TYPE
Controls creation/deletion of conceptual rows within this table. The color field is mandatory and must be specified. Modes supported are create-and-go and destroy. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.11.1.1RowStatusread-createdeprecated
juniColor
OBJECT-TYPE
The color with which to explicitly color packets associated with this policy rule. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.11.1.2INTEGER {red(1), yellow(2), green(3)}read-createdeprecated
juniColorClaclId
OBJECT-TYPE
The classifier control list ID which fills out the Color policy rule. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.11.1.3Integer32 (0..2147483647)read-createdeprecated
juniLogRuleTable
OBJECT-TYPE
A list of entries which provide log rule data. Creation of an entry in this table results in a corresponding entry being created in the policy rule table. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.12not-accessibledeprecated
juniLogRuleEntry
OBJECT-TYPE
A log rule entry. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.12.1not-accessibledeprecated
juniLogRowStatus
OBJECT-TYPE
Controls creation/deletion of conceptual rows within this table. Modes supported are create-and-go and destroy. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.12.1.1RowStatusread-createdeprecated
juniLogClaclId
OBJECT-TYPE
The classifier control list ID which completes the log policy rule. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.12.1.2Integer32 (0..2147483647)read-createdeprecated
juniTrafficClassRuleTable
OBJECT-TYPE
A list of entries which provide traffic Class rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.13not-accessibledeprecated
juniTrafficClassRuleEntry
OBJECT-TYPE
A Traffic Class rule entry. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.13.1not-accessibledeprecated
juniTrafficClassRowStatus
OBJECT-TYPE
Controls creation/deletion of conceptual rows within this table. The juniTrafficClassId field is mandatory and must be specified. Modes supported are create-and-go and destroy. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.13.1.1RowStatusread-createdeprecated
juniTrafficClassId
OBJECT-TYPE
The traffic class ID. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.13.1.2Integer32 (0..2147483647)read-createdeprecated
juniTrafficClassClaclId
OBJECT-TYPE
The classifier control list ID which fills out the traffic class policy rule. This object is deprecated due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.1.3.13.1.3Integer32 (0..2147483647)read-createdeprecated
juniPolicyRule2Table
OBJECT-TYPE
Each entry within this table defines a rule component of a policy. The entries in this table are created automatically when entries are created in specific rule tables. This table is read only.
1.3.6.1.4.1.4874.2.2.27.1.3.14not-accessiblecurrent
juniPolicyRule2Entry
OBJECT-TYPE
Each entry defines a single rule component.
1.3.6.1.4.1.4874.2.2.27.1.3.14.1not-accessiblecurrent
juniPolicyRulePolicyId2
OBJECT-TYPE
The PolicyTable index of the policy which owns this rule.
1.3.6.1.4.1.4874.2.2.27.1.3.14.1.1Integer32 (0..2147483647)not-accessiblecurrent
juniPolicyRuleClaclId
OBJECT-TYPE
The classifier index from the ClassifierControlListTable that this rule references.
1.3.6.1.4.1.4874.2.2.27.1.3.14.1.2Integer32 (0..2147483647)not-accessiblecurrent
juniPolicyRuleId2
OBJECT-TYPE
The index of this rule within the set of rules owned by the policy defined by juniPolicyRulePolicyId2.
1.3.6.1.4.1.4874.2.2.27.1.3.14.1.3Integer32 (0..2147483647)not-accessiblecurrent
juniPolicyRuleType2
OBJECT-TYPE
This field specifies the type of rule being defined. The remaining information which makes up this rule is found in the specific rule table defined by juniPolicyRuleType. The specific rule tables are indexed by juniPolicyRulePolicyId2, juniPolicyRuleClaclId, juniPolicyRuleId2.
1.3.6.1.4.1.4874.2.2.27.1.3.14.1.4INTEGER {noRule(0), nextHopRule(1), filterRule(2), nextInterfaceRule(3), rateLimitRule(4), markingRule(5), trafficClassRule(6), forwardRule(7), logRule(8), colorRule(10), exceptionRule(11)}read-onlycurrent
juniPolicySuspend2
OBJECT-TYPE
Setting this object to true results in the rule being suspended (taken out of service). Setting this value to false results in the rule being returned to service.
1.3.6.1.4.1.4874.2.2.27.1.3.14.1.5TruthValueread-writecurrent
juniNextHopRule2Table
OBJECT-TYPE
A list of entries which provide next-hop rule data. Rows created in this table result in an entry being created in the policy rule table.
1.3.6.1.4.1.4874.2.2.27.1.3.15not-accessiblecurrent
juniNextHopRule2Entry
OBJECT-TYPE
A next-hop rule entry.
1.3.6.1.4.1.4874.2.2.27.1.3.15.1not-accessiblecurrent
juniNextHopRowStatus2
OBJECT-TYPE
Controls creation/deletion of conceptual rows within this table. The next-hop IP address is mandatory and must be specified. Modes supported are create-and-go and destroy.
1.3.6.1.4.1.4874.2.2.27.1.3.15.1.1RowStatusread-createcurrent
juniNextHopIpAddress2
OBJECT-TYPE
The IP address to forward all packets to.
1.3.6.1.4.1.4874.2.2.27.1.3.15.1.2IpAddressread-createcurrent
juniFilterRule2Table
OBJECT-TYPE
A list of entries which provide filter rule data. Creation of an entry in this table results in a corresponding entry being created in the policy rule table.
1.3.6.1.4.1.4874.2.2.27.1.3.16not-accessiblecurrent
juniFilterRule2Entry
OBJECT-TYPE
A filter rule entry.
1.3.6.1.4.1.4874.2.2.27.1.3.16.1not-accessiblecurrent
juniFilterRowStatus2
OBJECT-TYPE
Controls creation/deletion of conceptual rows within this table. Modes supported are create-and-go and destroy.
1.3.6.1.4.1.4874.2.2.27.1.3.16.1.1RowStatusread-createcurrent
juniNextInterfaceRule2Table
OBJECT-TYPE
A list of entries which provide NextInterface rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table.
1.3.6.1.4.1.4874.2.2.27.1.3.17not-accessiblecurrent
juniNextInterfaceRule2Entry
OBJECT-TYPE
A NextInterface rule entry.
1.3.6.1.4.1.4874.2.2.27.1.3.17.1not-accessiblecurrent
juniNextInterfaceRowStatus2
OBJECT-TYPE
Controls creation/deletion of conceptual rows within this table. The next-interface parameter is mandatory and must be specified. Modes supported are create-and-go and destroy.
1.3.6.1.4.1.4874.2.2.27.1.3.17.1.1RowStatusread-createcurrent
juniNextInterfaceId2
OBJECT-TYPE
The interface index to which traffic matching the CLACL ID will be routed.
1.3.6.1.4.1.4874.2.2.27.1.3.17.1.2InterfaceIndexread-createcurrent
juniNextInterfaceNextHop2
OBJECT-TYPE
The IP address to forward all packets to.
1.3.6.1.4.1.4874.2.2.27.1.3.17.1.3IpAddressread-createcurrent
juniRateLimitRule2Table
OBJECT-TYPE
A list of entries which provide RateLimit rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table.
1.3.6.1.4.1.4874.2.2.27.1.3.18not-accessiblecurrent
juniRateLimitRule2Entry
OBJECT-TYPE
A RateLimit rule entry.
1.3.6.1.4.1.4874.2.2.27.1.3.18.1not-accessiblecurrent
juniRateLimitRowStatus2
OBJECT-TYPE
Controls creation/deletion of conceptual rows within this table. The rate limit profile ID is mandatory and must be specified. Modes supported are create-and-go and destroy.
1.3.6.1.4.1.4874.2.2.27.1.3.18.1.1RowStatusread-createcurrent
juniRateLimitId2
OBJECT-TYPE
The RLP ID which provides the rate limit data which completes the RateLimit policy rule.
1.3.6.1.4.1.4874.2.2.27.1.3.18.1.2Integer32 (0..2147483647)read-createcurrent
juniMarkingRule2Table
OBJECT-TYPE
A list of entries which provide Marking rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table.
1.3.6.1.4.1.4874.2.2.27.1.3.19not-accessiblecurrent
juniMarkingRule2Entry
OBJECT-TYPE
A Marking rule entry.
1.3.6.1.4.1.4874.2.2.27.1.3.19.1not-accessiblecurrent
juniMarkingRowStatus2
OBJECT-TYPE
Controls creation/deletion of conceptual rows within this table. The IP precedence field is mandatory and must be specified. Modes supported are create-and-go and destroy.
1.3.6.1.4.1.4874.2.2.27.1.3.19.1.1RowStatusread-createcurrent
juniMarkingTOSByte2
OBJECT-TYPE
The IP precedence value associated with this policy rule.
1.3.6.1.4.1.4874.2.2.27.1.3.19.1.2Integer32 (0..255)read-createcurrent
juniMarkingMask2
OBJECT-TYPE
The mask to use for TOS byte checks.
1.3.6.1.4.1.4874.2.2.27.1.3.19.1.3Integer32 (0..255)read-createcurrent
juniForwardRule2Table
OBJECT-TYPE
A list of entries which provide forward rule data. Creation of an entry in this table results in a corresponding entry being created in the policy rule table.
1.3.6.1.4.1.4874.2.2.27.1.3.20not-accessiblecurrent
juniForwardRule2Entry
OBJECT-TYPE
A forward rule entry.
1.3.6.1.4.1.4874.2.2.27.1.3.20.1not-accessiblecurrent
juniForwardRowStatus2
OBJECT-TYPE
Controls creation/deletion of conceptual rows within this table. Modes supported are create-and-go and destroy.
1.3.6.1.4.1.4874.2.2.27.1.3.20.1.1RowStatusread-createcurrent
juniForwardNextInterfaceId2
OBJECT-TYPE
The interface index to which traffic matching the CLACL ID will be routed.
1.3.6.1.4.1.4874.2.2.27.1.3.20.1.2InterfaceIndexread-createcurrent
juniForwardNextHop2
OBJECT-TYPE
The IP address to which all packets are forwarded.
1.3.6.1.4.1.4874.2.2.27.1.3.20.1.3IpAddressread-createcurrent
juniForwardRouterId2
OBJECT-TYPE
The index or ID of the router.
1.3.6.1.4.1.4874.2.2.27.1.3.20.1.4Integer32 (0..2147483647)read-onlycurrent
juniForwardOrder2
OBJECT-TYPE
The order of the forward rules for a given classifier within a policy. The forward rules will be ordered from the lowest order value to the highest.
1.3.6.1.4.1.4874.2.2.27.1.3.20.1.5Integer32 (1..32767)read-createcurrent
juniForwardIgnoreDefaultRoute2
OBJECT-TYPE
Setting this object to true results in the default route being ignored when determining if a next hop address is reachable.
1.3.6.1.4.1.4874.2.2.27.1.3.20.1.6TruthValueread-createcurrent
juniColorRule2Table
OBJECT-TYPE
A list of entries which provide Color rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table.
1.3.6.1.4.1.4874.2.2.27.1.3.21not-accessiblecurrent
juniColorRule2Entry
OBJECT-TYPE
A Color rule entry.
1.3.6.1.4.1.4874.2.2.27.1.3.21.1not-accessiblecurrent
juniColorRowStatus2
OBJECT-TYPE
Controls creation/deletion of conceptual rows within this table. The color field is mandatory and must be specified. Modes supported are create-and-go and destroy.
1.3.6.1.4.1.4874.2.2.27.1.3.21.1.1RowStatusread-createcurrent
juniColor2
OBJECT-TYPE
The color with which to explicitly color packets associated with this policy rule.
1.3.6.1.4.1.4874.2.2.27.1.3.21.1.2INTEGER {red(1), yellow(2), green(3)}read-createcurrent
juniLogRule2Table
OBJECT-TYPE
A list of entries which provide log rule data. Creation of an entry in this table results in a corresponding entry being created in the policy rule table.
1.3.6.1.4.1.4874.2.2.27.1.3.22not-accessiblecurrent
juniLogRule2Entry
OBJECT-TYPE
A log rule entry.
1.3.6.1.4.1.4874.2.2.27.1.3.22.1not-accessiblecurrent
juniLogRowStatus2
OBJECT-TYPE
Controls creation/deletion of conceptual rows within this table. Modes supported are create-and-go and destroy.
1.3.6.1.4.1.4874.2.2.27.1.3.22.1.1RowStatusread-createcurrent
juniTrafficClassRule2Table
OBJECT-TYPE
A list of entries which provide traffic Class rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table.
1.3.6.1.4.1.4874.2.2.27.1.3.23not-accessiblecurrent
juniTrafficClassRule2Entry
OBJECT-TYPE
A Traffic Class rule entry.
1.3.6.1.4.1.4874.2.2.27.1.3.23.1not-accessiblecurrent
juniTrafficClassRowStatus2
OBJECT-TYPE
Controls creation/deletion of conceptual rows within this table. The juniTrafficClassId2 field is mandatory and must be specified. Modes supported are create-and-go and destroy.
1.3.6.1.4.1.4874.2.2.27.1.3.23.1.1RowStatusread-createcurrent
juniTrafficClassId2
OBJECT-TYPE
The traffic class ID.
1.3.6.1.4.1.4874.2.2.27.1.3.23.1.2Integer32 (0..2147483647)read-createcurrent
juniPolicyClassifierGroupTable
OBJECT-TYPE
A list of entries that provide policy classifier group data. Creation of entries in this table result in a corresponding entry being created in the policy clacl group table.
1.3.6.1.4.1.4874.2.2.27.1.3.24not-accessiblecurrent
juniPolicyClassifierGroupEntry
OBJECT-TYPE
A classifier group entry.
1.3.6.1.4.1.4874.2.2.27.1.3.24.1not-accessiblecurrent
juniPolicyClassifierGroupPolicyId
OBJECT-TYPE
The PolicyTable index of the policy which owns this classifier group.
1.3.6.1.4.1.4874.2.2.27.1.3.24.1.1Integer32 (0..2147483647)not-accessiblecurrent
juniPolicyClassifierGroupClaclId
OBJECT-TYPE
The classifier index from the ClassifierControlListTable that this classifier group references.
1.3.6.1.4.1.4874.2.2.27.1.3.24.1.2Integer32 (0..2147483647)not-accessiblecurrent
juniPolicyClassifierGroupRowStatus
OBJECT-TYPE
Controls creation/deletion of conceptual rows within this table. Modes supported are create-and-go and destroy. Mode create-and-go will create a classifier group entry for the specified policy if the entry does not exist and will set the precedence value if provided. Mode destroy will delete all policy rules referencing this classifier within this policy and will delete the classifier group entry.
1.3.6.1.4.1.4874.2.2.27.1.3.24.1.3RowStatusread-createcurrent
juniPolicyClassifierGroupPrecedence
OBJECT-TYPE
The precedence value for this classifier within this policy.
1.3.6.1.4.1.4874.2.2.27.1.3.24.1.4Integer32 (0..65535)read-createcurrent
juniExceptionRuleTable
OBJECT-TYPE
A list of entries which provide Exception rule data. Creation of entries in the table result in a corresponding entry being created in the policy rule table.
1.3.6.1.4.1.4874.2.2.27.1.3.25not-accessiblecurrent
juniExceptionRuleEntry
OBJECT-TYPE
An Exception rule entry.
1.3.6.1.4.1.4874.2.2.27.1.3.25.1not-accessiblecurrent
juniExceptionRowStatus
OBJECT-TYPE
Controls creation/deletion of conceptual rows within this table. The exception field is mandatory and must be specified. Modes supported are create-and-go and destroy.
1.3.6.1.4.1.4874.2.2.27.1.3.25.1.1RowStatusread-createcurrent
juniExceptionApplication
OBJECT-TYPE
The application that will receive the packet exceptioned because of this policy action.
1.3.6.1.4.1.4874.2.2.27.1.3.25.1.2INTEGER {http-redirect(1)}read-createcurrent
juniPolicyIf
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.27.1.4
juniPolicyIfTable
OBJECT-TYPE
This obsolete table contains entries which represent attachment of policies to interfaces. This table became obsolete when the juniPolicyIfAttTable was added.
1.3.6.1.4.1.4874.2.2.27.1.4.1not-accessibleobsolete
juniPolicyIfEntry
OBJECT-TYPE
Each entry contains the attachment of policy(s) to an interface.
1.3.6.1.4.1.4874.2.2.27.1.4.1.1not-accessibleobsolete
juniPolicyIfInterfaceId
OBJECT-TYPE
The interface number representing the interface to which policy(s) have been attached.
1.3.6.1.4.1.4874.2.2.27.1.4.1.1.1Unsigned32not-accessibleobsolete
juniPolicyIfRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy *** LIMITED ACCESS LIST CONFIGURATION LEVEL *** RowStatus createAndGo/destroy operations have the following special-purpose semantics: createAndGo Create an entry having the specified configuration and append it to the target list, i.e. create a policy table entry with the associated policy name. destroy Destroy the specified list and all of its constituent elements. Policy row members may not be modified once the row has been created.
1.3.6.1.4.1.4874.2.2.27.1.4.1.1.2RowStatusread-createobsolete
juniPolicyIfInputPolicyId
OBJECT-TYPE
This object is used to control the attachment of input policies to the interface specified by juniPolicyIfInterfaceId, juniPolicyIfForwardingType and juniPolicyIfPolicyType. Attach a policy by setting this value to the ID of the policy. Remove a policy attachment by setting this value to zero. This object may be modified while the row is active. If so, the attachment is immediate.
1.3.6.1.4.1.4874.2.2.27.1.4.1.1.3Integer32read-createobsolete
juniPolicyIfOutputPolicyId
OBJECT-TYPE
This object is used to control the attachment of output policies to the interface specified by juniPolicyIfInterfaceId, juniPolicyIfForwardingType and juniPolicyIfPolicyType. Attach a policy by setting this value to the ID of the policy. Remove a policy attachment by setting this value to zero. This object may be modified while the row is active. If so, the attachment is immediate.
1.3.6.1.4.1.4874.2.2.27.1.4.1.1.4Integer32read-createobsolete
juniPolicyIfInputStatsEnable
OBJECT-TYPE
This object is used to control the enabling and disabling of statistics for an input policy attachment. Set this object to true to enable statistics. Set this object to false to disable statistics. This object may be modified while the row is active. The desired value must be set before the policy is attached or in a multiple object varbind. Failure to do so will result in the policy being attached with the previous value of juniPolicyInputStatsEnable.
1.3.6.1.4.1.4874.2.2.27.1.4.1.1.5TruthValueread-createobsolete
juniPolicyIfOutputStatsEnable
OBJECT-TYPE
This object is used to control the enabling and disabling of statistics for an output policy attachment. Set this object to true to enable statistics. Set this object to false to disable statistics. This object may be modified while the row is active. The desired value must be set before the policy is attached or in a multiple object varbind. Failure to do so will result in the policy being attached with the previous value of juniPolicyOutputStatsEnable.
1.3.6.1.4.1.4874.2.2.27.1.4.1.1.6TruthValueread-createobsolete
juniPolicyIfAttachTable
OBJECT-TYPE
This table contains entries which represent attachment of policies to interfaces.
1.3.6.1.4.1.4874.2.2.27.1.4.2not-accessiblecurrent
juniPolicyIfAttachEntry
OBJECT-TYPE
Each entry contains the attachment of policy(s) to an interface.
1.3.6.1.4.1.4874.2.2.27.1.4.2.1not-accessiblecurrent
juniPolicyIfAttachInterfaceId
OBJECT-TYPE
The interface number representing the interface to which policy(s) have been attached.
1.3.6.1.4.1.4874.2.2.27.1.4.2.1.1InterfaceIndexnot-accessiblecurrent
juniPolicyIfAttachForwardingType
OBJECT-TYPE
The interface type (i.e. IP or CBF) which the policy have been attached to.
1.3.6.1.4.1.4874.2.2.27.1.4.2.1.2JuniPolicyForwardingTypenot-accessiblecurrent
juniPolicyIfAttachPolicyType
OBJECT-TYPE
The policy type (i.e. input, output or secondary input).
1.3.6.1.4.1.4874.2.2.27.1.4.2.1.3JuniPolicyAttachmentTypenot-accessiblecurrent
juniPolicyIfAttachRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy *** LIMITED ACCESS LIST CONFIGURATION LEVEL *** RowStatus createAndGo/destroy operations have the following special-purpose semantics: createAndGo Create an entry having the specified configuration and append it to the target list, i.e. create a policy table entry with the associated policy name. destroy Destroy the specified list and all of its constituent elements. Policy row members may not be modified once the row has been created.
1.3.6.1.4.1.4874.2.2.27.1.4.2.1.4RowStatusread-createcurrent
juniPolicyIfAttachPolicyId
OBJECT-TYPE
This object is used to control the attachment of policies to the interface specified by juniPolicyIfAttachInterfaceId, juniPolicyIfAttachForwardingType and juniPolicyIfAttachPolicyType. Attach a policy by setting this value to the ID of the policy. Remove a policy attachment by setting this value to zero. This object may be modified while the row is active. If so, the attachment is immediate.
1.3.6.1.4.1.4874.2.2.27.1.4.2.1.5Integer32 (0..2147483647)read-createcurrent
juniPolicyIfAttachStatsEnable
OBJECT-TYPE
This object is used to control the enabling and disabling of statistics for a policy attachment. Set this object to true to enable statistics. Set this object to false to disable statistics. This object may be modified while the row is active. The desired value must be set before the policy is attached or in a multiple object varbind. Failure to do so will result in the policy being attached with the previous value of juniPolicyIfAttachStatsEnable.
1.3.6.1.4.1.4874.2.2.27.1.4.2.1.6TruthValueread-createcurrent
juniPolicyIfAttachStatsPreserve
OBJECT-TYPE
This object is used to control the preserving of statistics when a policy is attached to an interface that already has a policy attachment. Set this object to true to preserve statistics. Get and GetNext will always return false. This object may be modified while the row is active. The desired value must be set before the policy is attached or in a multiple object varbind. Failure to do so will result in the policy being attached with the previous value of juniPolicyIfAttachStatsPreserve.
1.3.6.1.4.1.4874.2.2.27.1.4.2.1.7TruthValueread-createcurrent
juniPolicyProfile
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.27.1.5
juniPolicyProfileTable
OBJECT-TYPE
This obsolete table contains entries which represent attachment of policies to dynamic interfaces through profiles. This table became obsolete when the juniPolicyAttachProfileTable was added.
1.3.6.1.4.1.4874.2.2.27.1.5.1not-accessibleobsolete
juniPolicyProfileEntry
OBJECT-TYPE
Each entry contains the profile for attachment of policy(s) to a dynamic interface.
1.3.6.1.4.1.4874.2.2.27.1.5.1.1not-accessibleobsolete
juniPolicyProfileId
OBJECT-TYPE
The profile to which the policy attachment profile data belongs. When this profile is applied to a dynamic interface the associated policies will be applied to that interface.
1.3.6.1.4.1.4874.2.2.27.1.5.1.1.1Unsigned32not-accessibleobsolete
juniPolicyProfileRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy *** LIMITED ACCESS LIST CONFIGURATION LEVEL *** RowStatus createAndGo/destroy operations have the following special-purpose semantics: createAndGo Create an entry having the specified configuration and append it to the target list, i.e. create a policy table entry with the associated policy name. destroy Destroy the specified list and all of its constituent elements. Policy row members may not be modified once the row has been created.
1.3.6.1.4.1.4874.2.2.27.1.5.1.1.2RowStatusread-createobsolete
juniPolicyProfileInputPolicyId
OBJECT-TYPE
This object is used to control the attachment of input policies to dynamic interfaces configured by the profile identified by juniPolicyProfileId. Attach a policy by setting this value to the ID of the policy. Remove a policy attachment by setting this value to zero. This object may be modified while the row is active. Changes made to a row in this table do not take effect until the profile is applied.
1.3.6.1.4.1.4874.2.2.27.1.5.1.1.3Integer32 (0..2147483647)read-createobsolete
juniPolicyProfileOutputPolicyId
OBJECT-TYPE
This object is used to control the attachment of output policies to dynamic interfaces configured by the profile identified by juniPolicyProfileId. Attach a policy by setting this value to the ID of the policy. Remove a policy attachment by setting this value to zero. This object may be modified while the row is active. Changes made to a row in this table do not take effect until the profile is applied to an interface.
1.3.6.1.4.1.4874.2.2.27.1.5.1.1.4Integer32 (0..2147483647)read-createobsolete
juniPolicyProfileInputStatsEnable
OBJECT-TYPE
This object is used to control the enabling and disabling of statistics for an input policy attachment performed by a profile. Set this object to true to enable statistics. Set this object to false to disable statistics. This object may be modified while the row is active. The changes will not take effect until the profile is applied to an interface.
1.3.6.1.4.1.4874.2.2.27.1.5.1.1.5TruthValueread-createobsolete
juniPolicyProfileOutputStatsEnable
OBJECT-TYPE
This object is used to control the enabling and disabling of statistics for an output policy attachment performed by a profile. Set this object to true to enable statistics. Set this object to false to disable statistics. This object may be modified while the row is active. The changes will not take effect until the profile is applied to an interface.
1.3.6.1.4.1.4874.2.2.27.1.5.1.1.6TruthValueread-createobsolete
juniPolicyProfileLocalInputPolicyId
OBJECT-TYPE
This object is used to control the attachment of local input policies to dynamic interfaces configured by the profile identified by juniPolicyProfileId. Attach a policy by setting this value to the ID of the policy. Remove a policy attachment by setting this value to zero. This object may be modified while the row is active. Changes made to a row in this table do not take effect until the profile is applied.
1.3.6.1.4.1.4874.2.2.27.1.5.1.1.7Integer32 (0..2147483647)read-createobsolete
juniPolicyProfileLocalInputStatsEnable
OBJECT-TYPE
This object is used to control the enabling and disabling of statistics for a local input policy attachment performed by a profile. Set this object to true to enable statistics. Set this object to false to disable statistics. This object may be modified while the row is active. The changes will not take effect until the profile is applied to an interface.
1.3.6.1.4.1.4874.2.2.27.1.5.1.1.8TruthValueread-createobsolete
juniPolicyAttachProfileTable
OBJECT-TYPE
This table contains entries which represent attachment of policies to dynamic interfaces through profiles.
1.3.6.1.4.1.4874.2.2.27.1.5.2not-accessiblecurrent
juniPolicyAttachProfileEntry
OBJECT-TYPE
Each entry contains the profile for attachment of policy(s) to a dynamic interface.
1.3.6.1.4.1.4874.2.2.27.1.5.2.1not-accessiblecurrent
juniPolicyAttachProfileId
OBJECT-TYPE
The profile to which the policy attachment profile data belongs. When this profile is applied to a dynamic interface the associated policies will be applied to that interface.
1.3.6.1.4.1.4874.2.2.27.1.5.2.1.1Unsigned32not-accessiblecurrent
juniPolicyAttachProfileForwardingType
OBJECT-TYPE
The interface type (i.e. IP or CBF) which the policy would be attached to.
1.3.6.1.4.1.4874.2.2.27.1.5.2.1.2JuniPolicyForwardingTypenot-accessiblecurrent
juniPolicyAttachProfilePolicyType
OBJECT-TYPE
The policy type (i.e. input, output or secondary input).
1.3.6.1.4.1.4874.2.2.27.1.5.2.1.3JuniPolicyAttachmentTypenot-accessiblecurrent
juniPolicyAttachProfileRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy *** LIMITED ACCESS LIST CONFIGURATION LEVEL *** RowStatus createAndGo/destroy operations have the following special-purpose semantics: createAndGo Create an entry having the specified configuration and append it to the target list, i.e. create a policy table entry with the associated policy name. destroy Destroy the specified list and all of its constituent elements. Policy row members may not be modified once the row has been created.
1.3.6.1.4.1.4874.2.2.27.1.5.2.1.4RowStatusread-createcurrent
juniPolicyAttachProfilePolicyId
OBJECT-TYPE
This object is used to control the attachment of policies to dynamic interfaces configured by the profile identified by juniPolicyAttachProfileId, juniPolicyAttachProfileForwardingType and juniPolicyAttachProfilePolicyType. Attach a policy by setting this value to the ID of the policy. Remove a policy attachment by setting this value to zero. This object may be modified while the row is active. Changes made to a row in this table do not take effect until the profile is applied.
1.3.6.1.4.1.4874.2.2.27.1.5.2.1.5Integer32 (0..2147483647)read-createcurrent
juniPolicyAttachProfileStatsEnable
OBJECT-TYPE
This object is used to control the enabling and disabling of statistics for an policy attachment performed by a profile. Set this object to true to enable statistics. Set this object to false to disable statistics. This object may be modified while the row is active. The changes will not take effect until the profile is applied to an interface.
1.3.6.1.4.1.4874.2.2.27.1.5.2.1.6TruthValueread-createcurrent
juniPolicyStatistics
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.27.1.6
juniPolicyIfStatsTable
OBJECT-TYPE
Each entry within this obsolete table contains statistics data for an interface/policy rule combination. Interfaces with policies attached and statistics disabled are not represented in this table.
1.3.6.1.4.1.4874.2.2.27.1.6.1not-accessibleobsolete
juniPolicyIfStatsEntry
OBJECT-TYPE
Each entry defines a single statistics entry.
1.3.6.1.4.1.4874.2.2.27.1.6.1.1not-accessibleobsolete
juniPolicyIfStatsIfId
OBJECT-TYPE
The interface ID corresponding to the stats block represented by this row.
1.3.6.1.4.1.4874.2.2.27.1.6.1.1.1InterfaceIndexnot-accessibleobsolete
juniPolicyIfStatsPolicyType
OBJECT-TYPE
The attachment point for the policy.
1.3.6.1.4.1.4874.2.2.27.1.6.1.1.2JuniPolicyAttachmentTypenot-accessibleobsolete
juniPolicyIfStatsPolicyId
OBJECT-TYPE
The PolicyTable index of the policy corresponding to the stats block represented by this row.
1.3.6.1.4.1.4874.2.2.27.1.6.1.1.3Integer32 (0..2147483647)not-accessibleobsolete
juniPolicyIfStatsRulePrec
OBJECT-TYPE
The precedence of the policy rule corresponding to the stats block represented by this row.
1.3.6.1.4.1.4874.2.2.27.1.6.1.1.4Integer32 (0..2147483647)not-accessibleobsolete
juniPolicyIfStatsRuleId
OBJECT-TYPE
The index of the policy rule corresponding to the stats block represented by this row.
1.3.6.1.4.1.4874.2.2.27.1.6.1.1.5Integer32 (0..2147483647)not-accessibleobsolete
juniPolicyIfStatsClaclEntryNumber
OBJECT-TYPE
The index of the clacl entry number corresponding to the stats block represented by this row.
1.3.6.1.4.1.4874.2.2.27.1.6.1.1.6Integer32 (0..2147483647)not-accessibleobsolete
juniPolicyIfStatsGreenPackets
OBJECT-TYPE
The number of green packets policed by the policy rule.
1.3.6.1.4.1.4874.2.2.27.1.6.1.1.7Counter64read-onlyobsolete
juniPolicyIfStatsYellowPackets
OBJECT-TYPE
The number of yellow packets policed by the policy rule.
1.3.6.1.4.1.4874.2.2.27.1.6.1.1.8Counter64read-onlyobsolete
juniPolicyIfStatsRedPackets
OBJECT-TYPE
The number of red packets policed by the policy rule.
1.3.6.1.4.1.4874.2.2.27.1.6.1.1.9Counter64read-onlyobsolete
juniPolicyIfStatsGreenBytes
OBJECT-TYPE
The number of green bytes policed by the policy rule.
1.3.6.1.4.1.4874.2.2.27.1.6.1.1.10Counter64read-onlyobsolete
juniPolicyIfStatsYellowBytes
OBJECT-TYPE
The number of yellow bytes policed by the policy rule.
1.3.6.1.4.1.4874.2.2.27.1.6.1.1.11Counter64read-onlyobsolete
juniPolicyIfStatsRedBytes
OBJECT-TYPE
The number of red bytes policed by the policy rule.
1.3.6.1.4.1.4874.2.2.27.1.6.1.1.12Counter64read-onlyobsolete
juniPolicyIfAttachStatsTable
OBJECT-TYPE
Each entry within this obsolete table contains statistics data for an interface/policy rule combination. Interfaces with policies attached and statistics disabled are not represented in this table. This table became obsolete when policy precedence enhancements were made.
1.3.6.1.4.1.4874.2.2.27.1.6.2not-accessibleobsolete
juniPolicyIfAttachStatsEntry
OBJECT-TYPE
Each entry defines a single statistics entry.
1.3.6.1.4.1.4874.2.2.27.1.6.2.1not-accessibleobsolete
juniPolicyIfAttachStatsIfId
OBJECT-TYPE
The interface ID corresponding to the stats block represented by this row. This object became obsolete when policy precedence enhancements were made.
1.3.6.1.4.1.4874.2.2.27.1.6.2.1.1InterfaceIndexnot-accessibleobsolete
juniPolicyIfAttachStatsForwardingType
OBJECT-TYPE
The forwarding type for the policy attachment. This object became obsolete when policy precedence enhancements were made.
1.3.6.1.4.1.4874.2.2.27.1.6.2.1.2JuniPolicyForwardingTypenot-accessibleobsolete
juniPolicyIfAttachStatsPolicyType
OBJECT-TYPE
The attachment point for the policy. This object became obsolete when policy precedence enhancements were made.
1.3.6.1.4.1.4874.2.2.27.1.6.2.1.3JuniPolicyAttachmentTypenot-accessibleobsolete
juniPolicyIfAttachStatsPolicyId
OBJECT-TYPE
The PolicyTable index of the policy corresponding to the stats block represented by this row. This object became obsolete when policy precedence enhancements were made.
1.3.6.1.4.1.4874.2.2.27.1.6.2.1.4Integer32 (0..2147483647)not-accessibleobsolete
juniPolicyIfAttachStatsRulePrec
OBJECT-TYPE
The precedence of the policy rule corresponding to the stats block represented by this row. This object became obsolete when policy precedence enhancements were made.
1.3.6.1.4.1.4874.2.2.27.1.6.2.1.5Integer32 (0..2147483647)not-accessibleobsolete
juniPolicyIfAttachStatsRuleId
OBJECT-TYPE
The index of the policy rule corresponding to the stats block represented by this row. This object became obsolete when policy precedence enhancements were made.
1.3.6.1.4.1.4874.2.2.27.1.6.2.1.6Integer32 (0..2147483647)not-accessibleobsolete
juniPolicyIfAttachStatsClaclEntryNumber
OBJECT-TYPE
The index of the clacl entry number corresponding to the stats block represented by this row. This object became obsolete when policy precedence enhancements were made.
1.3.6.1.4.1.4874.2.2.27.1.6.2.1.7Integer32 (0..2147483647)not-accessibleobsolete
juniPolicyIfAttachStatsGreenPackets
OBJECT-TYPE
The number of green packets policed by the policy rule. This object became obsolete when policy precedence enhancements were made.
1.3.6.1.4.1.4874.2.2.27.1.6.2.1.8Counter64read-onlyobsolete
juniPolicyIfAttachStatsYellowPackets
OBJECT-TYPE
The number of yellow packets policed by the policy rule. This object became obsolete when policy precedence enhancements were made.
1.3.6.1.4.1.4874.2.2.27.1.6.2.1.9Counter64read-onlyobsolete
juniPolicyIfAttachStatsRedPackets
OBJECT-TYPE
The number of red packets policed by the policy rule. This object became obsolete when policy precedence enhancements were made.
1.3.6.1.4.1.4874.2.2.27.1.6.2.1.10Counter64read-onlyobsolete
juniPolicyIfAttachStatsGreenBytes
OBJECT-TYPE
The number of green bytes policed by the policy rule. This object became obsolete when policy precedence enhancements were made.
1.3.6.1.4.1.4874.2.2.27.1.6.2.1.11Counter64read-onlyobsolete
juniPolicyIfAttachStatsYellowBytes
OBJECT-TYPE
The number of yellow bytes policed by the policy rule. This object became obsolete when policy precedence enhancements were made.
1.3.6.1.4.1.4874.2.2.27.1.6.2.1.12Counter64read-onlyobsolete
juniPolicyIfAttachStatsRedBytes
OBJECT-TYPE
The number of red bytes policed by the policy rule. This object became obsolete when policy precedence enhancements were made.
1.3.6.1.4.1.4874.2.2.27.1.6.2.1.13Counter64read-onlyobsolete
juniPolicyIfAttachStats2Table
OBJECT-TYPE
Each entry within this table contains statistics data for an interface/clacl rule combination. Interfaces with policies attached and statistics disabled are not represented in this table.
1.3.6.1.4.1.4874.2.2.27.1.6.3not-accessiblecurrent
juniPolicyIfAttachStats2Entry
OBJECT-TYPE
Each entry defines a single statistics entry.
1.3.6.1.4.1.4874.2.2.27.1.6.3.1not-accessiblecurrent
juniPolicyIfAttachStatsIfId2
OBJECT-TYPE
The interface ID corresponding to the stats block represented by this row.
1.3.6.1.4.1.4874.2.2.27.1.6.3.1.1InterfaceIndexnot-accessiblecurrent
juniPolicyIfAttachStatsForwardingType2
OBJECT-TYPE
The forwarding type for the policy attachment.
1.3.6.1.4.1.4874.2.2.27.1.6.3.1.2JuniPolicyForwardingTypenot-accessiblecurrent
juniPolicyIfAttachStatsPolicyType2
OBJECT-TYPE
The attachment point for the policy.
1.3.6.1.4.1.4874.2.2.27.1.6.3.1.3JuniPolicyAttachmentTypenot-accessiblecurrent
juniPolicyIfAttachStatsPolicyId2
OBJECT-TYPE
The PolicyTable index of the policy corresponding to the stats block represented by this row.
1.3.6.1.4.1.4874.2.2.27.1.6.3.1.4Integer32 (0..2147483647)not-accessiblecurrent
juniPolicyIfAttachStatsClaclId
OBJECT-TYPE
The ClaclTable index of the clacl corresponding to the stats block represented by this row.
1.3.6.1.4.1.4874.2.2.27.1.6.3.1.5Integer32 (0..2147483647)not-accessiblecurrent
juniPolicyIfAttachStatsClaclEntryNumber2
OBJECT-TYPE
The index of the clacl entry number corresponding to the stats block represented by this row.
1.3.6.1.4.1.4874.2.2.27.1.6.3.1.6Integer32 (0..2147483647)not-accessiblecurrent
juniPolicyIfAttachStatsGreenPackets2
OBJECT-TYPE
The number of green packets policed by the policy rule.
1.3.6.1.4.1.4874.2.2.27.1.6.3.1.7Counter64read-onlycurrent
juniPolicyIfAttachStatsYellowPackets2
OBJECT-TYPE
The number of yellow packets policed by the policy rule.
1.3.6.1.4.1.4874.2.2.27.1.6.3.1.8Counter64read-onlycurrent
juniPolicyIfAttachStatsRedPackets2
OBJECT-TYPE
The number of red packets policed by the policy rule.
1.3.6.1.4.1.4874.2.2.27.1.6.3.1.9Counter64read-onlycurrent
juniPolicyIfAttachStatsGreenBytes2
OBJECT-TYPE
The number of green bytes policed by the policy rule.
1.3.6.1.4.1.4874.2.2.27.1.6.3.1.10Counter64read-onlycurrent
juniPolicyIfAttachStatsYellowBytes2
OBJECT-TYPE
The number of yellow bytes policed by the policy rule.
1.3.6.1.4.1.4874.2.2.27.1.6.3.1.11Counter64read-onlycurrent
juniPolicyIfAttachStatsRedBytes2
OBJECT-TYPE
The number of red bytes policed by the policy rule.
1.3.6.1.4.1.4874.2.2.27.1.6.3.1.12Counter64read-onlycurrent
juniTrafficShapeControlList
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.27.1.7
juniTrafficShapeProfileNextIndex
OBJECT-TYPE
Obsolete scalar object returns the index of the next available row in the juniTrafficShapeProfileTable. This object returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that index allocation is unintended. This object became obsolete when the policy shaper capability was moved into the quality of service component.
1.3.6.1.4.1.4874.2.2.27.1.7.1Integer32 (0..2147483647)read-onlyobsolete
juniTrafficShapeProfileTable
OBJECT-TYPE
This table contains entries for elements of Traffic Shape Profile definitions. This table became obsolete when the policy shaper capability was moved into the quality of service component.
1.3.6.1.4.1.4874.2.2.27.1.7.2not-accessibleobsolete
juniTrafficShapeProfileEntry
OBJECT-TYPE
Each entry describes the characteristics of a traffic shape profile element.
1.3.6.1.4.1.4874.2.2.27.1.7.2.1not-accessibleobsolete
juniTrafficShapeProfileId
OBJECT-TYPE
The number of the traffic shape profile entry which is defined by this row.
1.3.6.1.4.1.4874.2.2.27.1.7.2.1.1Integer32 (0..2147483647)not-accessibleobsolete
juniTrafficShapeProfileRowStatus
OBJECT-TYPE
Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configured: juniTrafficShapeProfileRowStatus
1.3.6.1.4.1.4874.2.2.27.1.7.2.1.2RowStatusread-createobsolete
juniTrafficShapeProfileName
OBJECT-TYPE
Specifies the name of the traffic shape profile defined by this row.
1.3.6.1.4.1.4874.2.2.27.1.7.2.1.3DisplayString (SIZE(1..40))read-createobsolete
juniTrafficShapeReferenceCount
OBJECT-TYPE
This object reflects the number of times a traffic shape profile object is referenced by policies.
1.3.6.1.4.1.4874.2.2.27.1.7.2.1.4Counter32read-onlyobsolete
juniTrafficShapeRate
OBJECT-TYPE
The traffic shape rate in bits per second.
1.3.6.1.4.1.4874.2.2.27.1.7.2.1.5Integer32read-createobsolete
juniTrafficShapeBurst
OBJECT-TYPE
The traffic shape burst in bytes.
1.3.6.1.4.1.4874.2.2.27.1.7.2.1.6Integer32read-createobsolete
juniPolicyConformance
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.27.2
juniPolicyCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.27.2.1
juniPolicyGroups
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.27.2.2

Conformance

NameOIDStatus
juniPolicyCompliance
MODULE-COMPLIANCE
Obsolete compliance statement for entities which implement the Juniper policy management MIB. This statement became obsolete when policy traffic shape and color objects were added to the MIB.
1.3.6.1.4.1.4874.2.2.27.2.1.1obsolete
juniPolicyCompliance2
MODULE-COMPLIANCE
Obsolete compliance statement for entities which implement the Juniper policy management MIB. This statement was obsolete when policy log rule objects were added to the MIB.
1.3.6.1.4.1.4874.2.2.27.2.1.2obsolete
juniPolicyCompliance3
MODULE-COMPLIANCE
Obsolete compliance statement for entities which implement the Juniper policy management MIB. This statement became obsolete when policy color rule objects were added, the policy profile table was extended and the policy interface attachement tables were replaced by new versions.
1.3.6.1.4.1.4874.2.2.27.2.1.3obsolete
juniPolicyCompliance4
MODULE-COMPLIANCE
Obsolete compliance statement for entities which implement the Juniper policy management MIB. This statement became obsolete when TCP flag and IP flag classifier control list objects were added and the juniPolicyProfileTable was repalced by the juniPolicyAttachProfileTable.
1.3.6.1.4.1.4874.2.2.27.2.1.4obsolete
juniPolicyCompliance5
MODULE-COMPLIANCE
Obsolete compliance statement for entities which implement the Juniper policy management MIB. This statement became obsolete when traffic class rule objects and new rate limit objects were added and when the policy shaper capability was moved into the quality of service component.
1.3.6.1.4.1.4874.2.2.27.2.1.5obsolete
juniPolicyCompliance6
MODULE-COMPLIANCE
Obsolete compliance statement for entities which implement the Juniper policy management MIB. This statement became obsolete when new forward rules data objects were added.
1.3.6.1.4.1.4874.2.2.27.2.1.6obsolete
juniPolicyCompliance7
MODULE-COMPLIANCE
Obsolete compliance statement for entities which implement the Juniper policy management MIB. This statement became obsolete due to new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.2.1.7obsolete
juniPolicyCompliance8
MODULE-COMPLIANCE
The compliance statement for entities which implement the Juniper policy management MIB. This statement was made obsolete when support for policy sharing was added.
1.3.6.1.4.1.4874.2.2.27.2.1.8obsolete
juniPolicyCompliance9
MODULE-COMPLIANCE
The compliance statement for entities which implement the Juniper policy management MIB. This statement was made obsolete when ATM-cell-mode support was added to the policy configuration.
1.3.6.1.4.1.4874.2.2.27.2.1.9obsolete
juniPolicyCompliance10
MODULE-COMPLIANCE
The compliance statement for entities which implement the Juniper policy management MIB.
1.3.6.1.4.1.4874.2.2.27.2.1.10current
juniPolicyGroup
OBJECT-GROUP
Obsolete collection of objects for managing policies in a Juniper product. This group became obsolete when policy traffic shape and color objects were added.
1.3.6.1.4.1.4874.2.2.27.2.2.1obsolete
juniRateLimitControlListGroup
OBJECT-GROUP
Obsolete collection of objects for managing rate limit control lists in a Juniper product. This group became obsolete when it was replaced by the juniRateLimitGroup so that rate limit support could become optional.
1.3.6.1.4.1.4874.2.2.27.2.2.2obsolete
juniClassifierControlListGroup
OBJECT-GROUP
Obsolete collection of objects for managing elements of classifier control lists in a Juniper product. This group became obsolete when support was added for TCP flag and IP flag control objects.
1.3.6.1.4.1.4874.2.2.27.2.2.3obsolete
juniPolicyIfGroup
OBJECT-GROUP
Obsolete collection of objects for managing attachment of policies to interfaces in a Juniper product. This group became obsolete when the juniPolicyIfTable was replaced by the juniPolicyIfAttachTable.
1.3.6.1.4.1.4874.2.2.27.2.2.4obsolete
juniPolicyProfileGroup
OBJECT-GROUP
Obsolete collection of objects for managing attachment of policies to dynamic interfaces through profiles in a Juniper product. This group became obsolete when the juniPolicyProfileLocalInputPolicyId and the juniPolicyProfileLocalInputStatsEnable objects were added.
1.3.6.1.4.1.4874.2.2.27.2.2.5obsolete
juniPolicyStatisticsGroup
OBJECT-GROUP
Obsolete collection of objects for managing statistics data for an interface/policy rule combination in a Juniper product. This group became obsolete when the juniPolicyIfStatsTable was replaced by the juniPolicyIfAttachStatsTable.
1.3.6.1.4.1.4874.2.2.27.2.2.6obsolete
juniPolicyGroup2
OBJECT-GROUP
Obsolete collection of objects for managing policies in a Juniper product. This group became obsolete when the specific rules objects were broken out into separte groups.
1.3.6.1.4.1.4874.2.2.27.2.2.7obsolete
juniTrafficShapeProfileGroup
OBJECT-GROUP
Obsolete collection of objects for traffic shaping data for a policy rule in a Juniper product. This group became obsolete when it was combined with the traffic shape policy rules objects.
1.3.6.1.4.1.4874.2.2.27.2.2.8obsolete
juniLogRuleGroup
OBJECT-GROUP
A deprecated collection of objects for log data for a policy rule in a Juniper product. This group is deprecated due to a new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.2.2.9deprecated
juniPolicyIfAttachGroup
OBJECT-GROUP
A collection of objects for managing attachment of policies to interfaces in a Juniper product. This group statement was made obsolete when support for policy sharing was added.
1.3.6.1.4.1.4874.2.2.27.2.2.10obsolete
juniPolicyProfileGroup2
OBJECT-GROUP
Obsolete collection of objects for managing attachment of policies to dynamic interfaces through profiles. This group became obsolete when the juniPolicyProfileTable was replaced by the juniPolicyAttachProfileTable.
1.3.6.1.4.1.4874.2.2.27.2.2.11obsolete
juniPolicyAttachStatisticsGroup
OBJECT-GROUP
Obsolete collection of objects for managing statistics data for an interface/policy rule combination in a Juniper product.
1.3.6.1.4.1.4874.2.2.27.2.2.12obsolete
juniClassifierControlListGroup2
OBJECT-GROUP
An obsolete collection of objects for managing elements of classifier control lists in a Juniper product.
1.3.6.1.4.1.4874.2.2.27.2.2.13obsolete
juniPolicyAttachProfileGroup
OBJECT-GROUP
A collection of objects for managing attachment of policies to dynamic interfaces through profiles.
1.3.6.1.4.1.4874.2.2.27.2.2.14current
juniPolicyBaseGroup
OBJECT-GROUP
Obsolete collection of basic objects for managing policies in a Juniper product. This group became obsolete when oper status and error value objects were removed.
1.3.6.1.4.1.4874.2.2.27.2.2.15obsolete
juniNextHopRulesGroup
OBJECT-GROUP
A deprecated collection of objects for managing next-hop policy rules in a Juniper product. This group is deprecated due to a new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.2.2.16deprecated
juniFilterRulesGroup
OBJECT-GROUP
A deprecated collection of objects for managing filter policy rules in a Juniper product. This group is deprecated due to a new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.2.2.17deprecated
juniNextInterfaceRulesGroup
OBJECT-GROUP
A deprecated collection of objects for managing next-interface policy rules in a Juniper product. This group is deprecated due to a new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.2.2.18deprecated
juniRateLimitGroup
OBJECT-GROUP
Obsolete collection of objects for managing rate limit policy rules and profile lists in a Juniper product. This group became obsolete when new rate limit profile objects were added.
1.3.6.1.4.1.4874.2.2.27.2.2.19obsolete
juniMarkingRulesGroup
OBJECT-GROUP
A deprecated collection of objects for managing policy rules for marking in a Juniper product. This group is deprecated due to a new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.2.2.20deprecated
juniForwardRulesGroup
OBJECT-GROUP
Obsolete collection of objects for managing forward policy rules in a Juniper product. This group became obsolete when new forward rule data objects were added.
1.3.6.1.4.1.4874.2.2.27.2.2.21obsolete
juniTrafficShapeGroup
OBJECT-GROUP
Obsolete collection of objects for managing traffic shape policy rules and profile lists in a Juniper product. This group became obsolete when the policy shaper capability was moved into the quality of service component.
1.3.6.1.4.1.4874.2.2.27.2.2.22obsolete
juniColorRulesGroup
OBJECT-GROUP
A deprecated collection of objects for managing color policy rules in a Juniper product. This group is deprecated due to a new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.2.2.23deprecated
juniTrafficClassRulesGroup
OBJECT-GROUP
A deprecated collection of objects for managing traffic class policy rules in a Juniper product. This group is deprecated due to a new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.2.2.24deprecated
juniRateLimitGroup2
OBJECT-GROUP
A deprecated collection of objects for managing rate limit policy rules and profile lists in a Juniper product. This group is deprecated due to a new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.2.2.25deprecated
juniForwardRulesGroup2
OBJECT-GROUP
A deprecated collection of objects for managing forward policy rules in a Juniper product. This group is deprecated due to a new policy rule table key.
1.3.6.1.4.1.4874.2.2.27.2.2.26deprecated
juniNextHopRulesGroup2
OBJECT-GROUP
A collection of objects for managing next-hop policy rules in a Juniper product.
1.3.6.1.4.1.4874.2.2.27.2.2.27current
juniFilterRulesGroup2
OBJECT-GROUP
A collection of objects for managing filter policy rules in a Juniper product.
1.3.6.1.4.1.4874.2.2.27.2.2.28current
juniNextInterfaceRulesGroup2
OBJECT-GROUP
A collection of objects for managing next-interface policy rules in a Juniper product.
1.3.6.1.4.1.4874.2.2.27.2.2.29current
juniMarkingRulesGroup2
OBJECT-GROUP
A collection of objects for managing policy rules for marking in a Juniper product.
1.3.6.1.4.1.4874.2.2.27.2.2.30current
juniColorRulesGroup2
OBJECT-GROUP
A collection of objects for managing color policy rules in a Juniper product.
1.3.6.1.4.1.4874.2.2.27.2.2.31current
juniTrafficClassRulesGroup2
OBJECT-GROUP
A collection of objects for managing traffic class policy rules in a Juniper product.
1.3.6.1.4.1.4874.2.2.27.2.2.32current
juniRateLimitGroup3
OBJECT-GROUP
A collection of objects for managing rate limit policy rules and profile lists in a Juniper product.
1.3.6.1.4.1.4874.2.2.27.2.2.33current
juniPolicyClaclGrpGroup
OBJECT-GROUP
A collection of objects for managing policy classifier groups in a Juniper product.
1.3.6.1.4.1.4874.2.2.27.2.2.34current
juniPolicyBaseGroup2
OBJECT-GROUP
A collection of basic objects for managing policies in a Juniper product. This group was made obsolete when ATM-cell-mode support was added to the policy configuration.
1.3.6.1.4.1.4874.2.2.27.2.2.35obsolete
juniForwardRulesGroup3
OBJECT-GROUP
A collection of objects for managing forward policy rules in a Juniper product.
1.3.6.1.4.1.4874.2.2.27.2.2.36current
juniLogRuleGroup2
OBJECT-GROUP
A collection of objects for log data for a policy rule in a Juniper product.
1.3.6.1.4.1.4874.2.2.27.2.2.37current
juniPolicyAttachStatisticsGroup2
OBJECT-GROUP
A collection of objects for managing statistics data for an interface/policy rule combination in a Juniper product.
1.3.6.1.4.1.4874.2.2.27.2.2.38current
juniClassifierControlListGroup3
OBJECT-GROUP
A collection of objects for managing elements of classifier control lists in a Juniper product.
1.3.6.1.4.1.4874.2.2.27.2.2.39current
juniPolicyIfAttachGroup2
OBJECT-GROUP
A collection of objects for managing attachment of policies to interfaces in a Juniper product.
1.3.6.1.4.1.4874.2.2.27.2.2.40current
juniExceptionRulesGroup1
OBJECT-GROUP
A collection of objects for managing exception policy rules in a Juniper product.
1.3.6.1.4.1.4874.2.2.27.2.2.41current
juniPolicyBaseGroup3
OBJECT-GROUP
A collection of basic objects for managing policies in a Juniper product.
1.3.6.1.4.1.4874.2.2.27.2.2.42current