MIBs Depot

Juniper-ACCOUNTING-MIB

Registered at
1.3.6.1.4.1.4874.2.2.24
Last updated
2009-07-16 15:00
Organization
Juniper Networks, Inc.
Revisions
2009-07-16 15:00, 2005-04-26 15:00, 2003-02-28 15:00, 2002-12-17 15:37, 2001-12-05 14:16, 2001-11-19 19:00, 2001-03-26 13:22, 2000-11-07 19:00, 2000-07-21 00:00, 2000-03-20 00:00, 2000-01-17 00:00, 1999-10-18 00:00
Namespace
juniper
Source file
Juniper-ACCOUNTING-MIB
Digest
sha256:deb33d13bdc9f77c5099d8a9931abe20d1cac3629224f4057ffda9ac5f9032f1

Description

The accounting MIB for the Juniper Networks enterprise. This MIB augments with the Virtual Router Accounting MIB specified in RLI618.

Contact

Juniper Networks, Inc. Postal: 10 Technology Park Drive Westford, MA 01886-3146 USA Tel: +1 978 589 5800 Email: mib@Juniper.net

Imports

FromSymbols
ACCOUNTING-CONTROL-MIBacctngFileEntry, acctngSelectionEntry, acctngSelectionIndex
IF-MIBInterfaceIndex
Juniper-MIBsjuniMibs
Juniper-POLICY-MIBJuniPolicyAttachmentType
Juniper-TCJuniAcctngAdminType, JuniAcctngOperType, JuniEnable, JuniInterfaceDescrFormat, JuniInterfaceLocation
Juniper-UNI-IF-MIBjuniIfType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ACCOUNTING-CONTROL-MIB
IANAifType-MIB
IF-MIB
Juniper-ACCOUNTING-MIB
Juniper-MIBs
Juniper-POLICY-MIB
Juniper-TC
Juniper-UNI-IF-MIB
Juniper-UNI-SMI
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
juniAcctngMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.1
juniAcctngSelectionControl
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.1.1
juniAcctngSelectionTable
OBJECT-TYPE
A list of accounting information selection entries. Note that additions, modifications and deletions of entries in this table can occur at any time, but such changes only take effect on the next occasion when collection begins into a new interval. Thus, between modification and the next 'swap', the content of this table does not reflect the current selection.
1.3.6.1.4.1.4874.2.2.24.1.1.1not-accessiblecurrent
juniAcctngSelectionEntry
OBJECT-TYPE
An entry used to extend the the selection entry in acctngSelectionEntry. This conceptual row extension is used for Juniper accounting extensions for connectionless data collection.
1.3.6.1.4.1.4874.2.2.24.1.1.1.1not-accessiblecurrent
juniAcctngSelectionType
OBJECT-TYPE
Indicates the types of connections for which the information selected by this entry are to be collected. The ietfAccountControl(0) bit position indicates that the ACCOUNTING-CONTROL-MIB.acctngSelectionType in the base conceptual row determines the selection type. All other bit positions for this object over-ride the acctngSelectionType in the base conceptual row. When the value of this object over-rides the acctngSelectionType object, the following objects have no meaning: ACCOUNTING-CONTROL-MIB.acctngFileCollectFailedAttempts ACCOUNTING-CONTROL-MIB.acctngFileMinAge because they control or are related to connection oriented accounting.
1.3.6.1.4.1.4874.2.2.24.1.1.1.1.1Bits {ietfAccountControl(0), connectionLessLayer2(1)}read-writecurrent
juniAcctngSelectionMode
OBJECT-TYPE
Indicates the data collection mode.
1.3.6.1.4.1.4874.2.2.24.1.1.1.1.2INTEGER {absoluteCounterValues(1), deltaCounterValues(2)}read-writecurrent
juniAcctngSelectionSubtreeType
OBJECT-TYPE
Indicates the origin of the collection, given the row's subtree. The architecture implementation for statistics collection imposes that rows with distinct juniAcctngSelectionSubtreeType may not be collected into the same accounting file. Conversely, different files (configured from acctngSelectionFile) entries are necessary in order to collect from subtrees (configured from acctngSelectionSubtree) that imply into different subtree types (juniAcctngSelectionSubtreeType).
1.3.6.1.4.1.4874.2.2.24.1.1.1.1.3INTEGER {unknown(0), lineCard(1), systemController(2)}read-onlydeprecated
juniAcctngSelectionMaxIfStackLevels
OBJECT-TYPE
Indicates the maximum number of levels in the ifStack table to be returned when using the ifStack accounting schema. This object is ignored if acctngSelectionSubtree is not set to juniAcctngSelectionSchemaIfStack. When this object is zero, the entire stack above the starting point(s) given will be returned. When this object is set to 1, only ifIndexes stacked above the starting point(s) given will be returned.
1.3.6.1.4.1.4874.2.2.24.1.1.1.1.4Integer32read-writecurrent
juniAcctngSelectionPolicyName
OBJECT-TYPE
Specifies the name of the policy associated with the statistics collected when using the policy accounting schema. This object is ignored if acctngSelectionSubtree is not set to juniAcctngSelectionSchemaPolicy.
1.3.6.1.4.1.4874.2.2.24.1.1.1.1.5DisplayString (SIZE(0..40))read-writecurrent
juniAcctngSelectionPolicyType
OBJECT-TYPE
Specifies the attachment point for the policy associated with the statistics collected when using the policy accounting schema. This object is ignored if acctngSelectionSubtree is not set to juniAcctngSelectionSchemaPolicy.
1.3.6.1.4.1.4874.2.2.24.1.1.1.1.6JuniPolicyAttachmentTyperead-writecurrent
juniAcctngSelectionIfCreateDeleteStats
OBJECT-TYPE
Enable/disable interfaces create and delete statistics collection.
1.3.6.1.4.1.4874.2.2.24.1.1.1.1.7JuniEnableread-writecurrent
juniAcctngSelectionIfCreateDeleteStatsIfTypes
OBJECT-TYPE
The interface-types that are used in the configuration of the create/delete statistics collection. Allowed interface-types are IP, ATM1483, PPP and VLAN. These interface-types are allowed to configure if the interfaces create/delete stats feature is enabled i.e juniAcctngSelectionIfCreateDeleteStats == enable.
1.3.6.1.4.1.4874.2.2.24.1.1.1.1.8Bits {ip(0), ppp(1), atm1483(2), vlan(3), mplsMajor(4), mplsL2Shim(5), mplsMinor(6)}read-writecurrent
juniAcctngSelectionIfStackStartTable
OBJECT-TYPE
A list of ifIndexes to be used as starting point when using the ifStack selection schema. Note that additions, modifications and deletions of entries in this table can occur at any time, but such changes only take effect on the next occasion when collection begins into a new interval. Thus, between modification and the next 'swap', the content of this table does not reflect the current selection.
1.3.6.1.4.1.4874.2.2.24.1.1.3not-accessiblecurrent
juniAcctngSelectionIfStackStartEntry
OBJECT-TYPE
An entry used to determine the starting point entry when using the ifStack schema.
1.3.6.1.4.1.4874.2.2.24.1.1.3.1not-accessiblecurrent
juniAcctngSelectionIfStackIfIndex
OBJECT-TYPE
The ifIndex to be used as a starting point in the interface stack configuration. The interfaces to be returned in the ifStack schema will start from this value, going up.
1.3.6.1.4.1.4874.2.2.24.1.1.3.1.1InterfaceIndexnot-accessiblecurrent
juniAcctngSelectionIfStackRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table.
1.3.6.1.4.1.4874.2.2.24.1.1.3.1.2RowStatusread-createcurrent
juniAcctngFileControl
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.1.2
juniAcctngFileTable
OBJECT-TYPE
A unique value identifying the file transfer behavior and the the file to where accounting data is to be stored.
1.3.6.1.4.1.4874.2.2.24.1.2.1not-accessiblecurrent
juniAcctngFileEntry
OBJECT-TYPE
An entry used to extend the file management of acctngFileEntry. This conceptual row extension is used for Juniper accounting extensions to automate the transfer of accounting data to remote hosts.
1.3.6.1.4.1.4874.2.2.24.1.2.1.1not-accessiblecurrent
juniAcctngFileXferMode
OBJECT-TYPE
Indicates the mode to use for transfering accounting data to remote client. juniAcctngManualTransfer - Administrator is responsible for manually transfering collected accounting data off of the system. juniAcctngAutomatedTransfer - The agent will automatically transfer the collected accounting data based at a acctngFileIntervals using an entry in the juniFileXferTable pointed to by juniAcctngFileXferIndex. If a manager sets this object to this value, a corresponding row in the juniFileXferTable must exist, otherwise the set command will fail. juniActngTransferOnFileFull - The agent will automatically transfer the collected accounting data when the file reaches the maximum size defined by acctngFileMaximumSize. If a manager sets this object to this value, a corresponding row in the juniFileXferTable must exist, otherwise the set command will fail. juniAcctngRedundantTransfer - The agent will automatically transfer two copies of the accounting data based on the acctngFileInterval. One copy will go to the juniFileXferTable entry identified by juniAcctngFileXferIndex and one copy will go the the juniFileXferTable entry identified by juniAcctngFileXferSecondaryIndex.
1.3.6.1.4.1.4874.2.2.24.1.2.1.1.1INTEGER {juniAcctngManualTransfer(1), juniAcctngAutomatedTransfer(2), juniAcctngTransferOnFileFull(3), juniAcctngRedundantTransfer(4)}read-writecurrent
juniAcctngFileXferIndex
OBJECT-TYPE
Identifies an entry in the juniFileXferTable, which defines the file transfer parameters to use when the agent is configured to automatically transfer collected accounting data files. A set to this object will fail if a corresponding entry in the juniFileXferTable does not exist or it is not set to juniFileXferAcctngStatistics.
1.3.6.1.4.1.4874.2.2.24.1.2.1.1.2INTEGER (1..65535)read-writecurrent
juniAcctngFileXferSecondaryIndex
OBJECT-TYPE
Identifies a backup or secondary entry in the juniFileXferTable, which defines the file transfer parameters to use when the agent is configured to automatically transfer collected accounting data files. A set to this object will fail if a corresponding entry in the juniFileXferTable does not exist or it is not set to juniFileXferAcctngStatistics.
1.3.6.1.4.1.4874.2.2.24.1.2.1.1.3INTEGER (1..65535)read-writecurrent
juniAcctngInterfaceControl
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.1.3
juniAcctngObsInterfaceTable
OBJECT-TYPE
This table was obsoleted when the indexing changed.
1.3.6.1.4.1.4874.2.2.24.1.3.1not-accessibleobsolete
juniAcctngObsInterfaceEntry
OBJECT-TYPE
Obsolete table entry.
1.3.6.1.4.1.4874.2.2.24.1.3.1.1not-accessibleobsolete
juniAcctngObsInterfaceAdminStatus
OBJECT-TYPE
Obsolete object.
1.3.6.1.4.1.4874.2.2.24.1.3.1.1.1JuniAcctngAdminTyperead-createobsolete
juniAcctngObsInterfaceOperStatus
OBJECT-TYPE
Obsolete object.
1.3.6.1.4.1.4874.2.2.24.1.3.1.1.2JuniAcctngOperTyperead-onlyobsolete
juniAcctngObsInterfaceRowStatus
OBJECT-TYPE
Obsolete object.
1.3.6.1.4.1.4874.2.2.24.1.3.1.1.3RowStatusread-createobsolete
juniAcctngObsInterfaceAccntgFileIndex
OBJECT-TYPE
Obsolete object.
1.3.6.1.4.1.4874.2.2.24.1.3.1.1.4Integer32 (0..65535)read-createobsolete
juniAcctngInterfaceTable
OBJECT-TYPE
A table controlling the collection of accounting data on specific interfaces types. This table provides an efficient mechanism to enable and/or disable data collection on all interfaces of a specified type. This table replaces the obsolete version with the same name.
1.3.6.1.4.1.4874.2.2.24.1.3.2not-accessiblecurrent
juniAcctngInterfaceEntry
OBJECT-TYPE
An entry which controls whether accounting data is to be collected on interfaces of a specific type, to a specific accounting file and by the systems interface location.
1.3.6.1.4.1.4874.2.2.24.1.3.2.1not-accessiblecurrent
juniAcctngInterfaceFileIndex
OBJECT-TYPE
This object selects the acctngFileTable entry for the collection statistics for this interface type. The value of this object is the same as the acctngFileIndex and is used to cross reference accounting data files in the AcctngFileTable. If the value of this object is zero (special value), then the combined interface type/location defined by this entry is collected into all entries in the acctngFileTable, i.e., all accounting files.
1.3.6.1.4.1.4874.2.2.24.1.3.2.1.1Integer32 (0..65535)not-accessiblecurrent
juniAcctngInterfaceLocation
OBJECT-TYPE
The interface location specification for this entry. If the value of this entry is a zero length string, then all system locations are included for the interface type defined by juniIfType.
1.3.6.1.4.1.4874.2.2.24.1.3.2.1.2JuniInterfaceLocationnot-accessiblecurrent
juniAcctngInterfaceAdminStatus
OBJECT-TYPE
The desired administrative state for accounting data collection for interfaces defined by the type of this entry. The administrative scope is for all interfaces of the type defined by the corresponding juniIfType for this entry.
1.3.6.1.4.1.4874.2.2.24.1.3.2.1.3JuniAcctngAdminTyperead-createcurrent
juniAcctngInterfaceOperStatus
OBJECT-TYPE
The operational state for accounting data collection on for all interfaces corresponding to this entries type.
1.3.6.1.4.1.4874.2.2.24.1.3.2.1.4JuniAcctngOperTyperead-onlycurrent
juniAcctngInterfaceRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table.
1.3.6.1.4.1.4874.2.2.24.1.3.2.1.5RowStatusread-createcurrent
juniAcctngIfFinalStatsXferStatsTable
OBJECT-TYPE
A table to display line cards interfaces final statistics transfer statistics.
1.3.6.1.4.1.4874.2.2.24.1.3.3not-accessiblecurrent
juniAcctngIfFinalStatsXferStatsEntry
OBJECT-TYPE
An entry is a display of one line card's interfaces final statistics transfer statistics.
1.3.6.1.4.1.4874.2.2.24.1.3.3.1not-accessiblecurrent
juniAcctngIfFinalStatsXferStatsSlotNumber
OBJECT-TYPE
This object selects the slot number to display interfaces final statistics transfer statistics for the line module on that slot.
1.3.6.1.4.1.4874.2.2.24.1.3.3.1.1Integer32 (0..14)not-accessiblecurrent
juniAcctngIfFinalStatsXferStatsReceived
OBJECT-TYPE
Count of the total received interfaces final statistics records for the line module.
1.3.6.1.4.1.4874.2.2.24.1.3.3.1.2Unsigned32read-onlycurrent
juniAcctngIfFinalStatsXferStatsTransferred
OBJECT-TYPE
Count of the total transferred interfaces final statistics records for the line module.
1.3.6.1.4.1.4874.2.2.24.1.3.3.1.3Unsigned32read-onlycurrent
juniAcctngIfFinalStatsXferStatsDropped
OBJECT-TYPE
Count of the total dropped interfaces final statistics records for the line module.
1.3.6.1.4.1.4874.2.2.24.1.3.3.1.4Unsigned32read-onlycurrent
juniAcctngScalarGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.1.4
juniAcctngInterfaceDescrFormat
OBJECT-TYPE
The format of the interface descriptions reported by the accounting application.
1.3.6.1.4.1.4874.2.2.24.1.4.1JuniInterfaceDescrFormatread-writecurrent
juniAcctngInterfaceNumberingMode
OBJECT-TYPE
The format of the interface descriptions reported by the accounting application.
1.3.6.1.4.1.4874.2.2.24.1.4.2INTEGER {proprietaryNumbering(0), rfc1213Number(1)}read-writecurrent
juniAcctngFileFormat
OBJECT-TYPE
The file format of the accounting file.
1.3.6.1.4.1.4874.2.2.24.1.4.3INTEGER {includeCR(0), includeCRLF(1)}read-writecurrent
juniAcctngVirtualRouterControl
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.1.5
juniAcctngVirtualRouterTable
OBJECT-TYPE
This Table stores the configuration of Virtual Routers per collector (File Index) basis. Multiple Virtual Routers can be configured per collector (file index)
1.3.6.1.4.1.4874.2.2.24.1.5.1not-accessiblecurrent
juniAcctngVirtualRouterTableEntry
OBJECT-TYPE
An entry used to determine the starting point entry when using the ifStack schema.
1.3.6.1.4.1.4874.2.2.24.1.5.1.1not-accessiblecurrent
juniAcctngVirtualRouterTableIndex
OBJECT-TYPE
This Index to be used as a starting point in the Virtual Router Table configuration. The index to be returned in the Virtual Router Table will start from this value, going up.
1.3.6.1.4.1.4874.2.2.24.1.5.1.1.1Integer32read-onlycurrent
juniAcctngVirtualRouterTableVRName
OBJECT-TYPE
Virtual Router name(s) space separated.
1.3.6.1.4.1.4874.2.2.24.1.5.1.1.2DisplayString (SIZE(0..255))read-createcurrent
juniAcctngVirtualRouterTableRowStatus
OBJECT-TYPE
Controls creation/deletion of entries in this table.
1.3.6.1.4.1.4874.2.2.24.1.5.1.1.3RowStatusread-createcurrent
juniAcctngSelectionSchema
OBJECT-IDENTITY
The root OBJECT IDENTIFIER under which accounting selection tree objects are assigned.
1.3.6.1.4.1.4874.2.2.24.2current
juniAcctngSelectionSchemaIf
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.1
juniAcctngIfInOctets
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.1.1
juniAcctngIfInUcastPkts
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.1.2
juniAcctngIfInDiscards
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.1.3
juniAcctngIfInErrors
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.1.4
juniAcctngIfInUnknownProtos
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.1.5
juniAcctngIfOutOctets
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.1.6
juniAcctngIfOutUcastPkts
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.1.7
juniAcctngIfOutDiscards
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.1.8
juniAcctngIfOutErrors
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.1.9
juniAcctngIfCorrelator
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.1.10
juniAcctngIfInPolicedOctets
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.1.11
juniAcctngIfInPolicedPkts
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.1.12
juniAcctngIfInSpoofedPkts
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.1.13
juniAcctngIfOutPolicedOctets
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.1.14
juniAcctngIfOutPolicedPkts
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.1.15
juniAcctngIfOutSchedulerDropOctets
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.1.16
juniAcctngIfOutSchedulerDropPkts
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.1.17
juniAcctngIfLowerInterface
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.1.18
juniAcctngIfTimeOffset
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.1.19
juniAcctngifInMulticastPkts
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.1.20
juniAcctngifInBroadcastPkts
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.1.21
juniAcctngifOutMulticastPkts
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.1.22
juniAcctngifOutBroadcastPkts
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.1.23
juniAcctngSelectionSchemaIfStack
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.3
juniAcctngSelectionSchemaSystem
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.4
juniAcctngSelectionSchemaPolicy
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.5
juniAcctngGreenPackets
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.5.1
juniAcctngUpperGreenPackets
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.5.2
juniAcctngYellowPackets
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.5.3
juniAcctngUpperYellowPackets
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.5.4
juniAcctngRedPackets
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.5.5
juniAcctngUpperRedPackets
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.5.6
juniAcctngGreenBytes
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.5.7
juniAcctngUpperGreenBytes
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.5.8
juniAcctngYellowBytes
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.5.9
juniAcctngUpperYellowBytes
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.5.10
juniAcctngRedBytes
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.5.11
juniAcctngUpperRedBytes
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.5.12
juniAcctngSelectionSchemaIgmp
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.6
juniAcctngIgmpLowerIndex
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.6.1
juniAcctngIgmpRouterIndex
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.6.2
juniAcctngIgmpDestAddr
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.6.3
juniAcctngIgmpSourceIndex
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.6.4
juniAcctngIgmpMulticastGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.6.5
juniAcctngIgmpLowerIgmpCommand
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.6.6
juniAcctngIgmpLowerTimeStamp
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.6.7
juniAcctngSelectionSchemaQos
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7
juniAcctngParentShapingRate
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.1
juniAcctngParentSharedShapRate
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.2
juniAcctngParentChildWeight
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.3
juniAcctngQueueLength
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.4
juniAcctngForwardedRate
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.5
juniAcctngAggDropRate
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.6
juniAcctngForwardedPackets
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.7
juniAcctngForwardedBytes
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.8
juniAcctngGreenDropPackets
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.9
juniAcctngGreenDropBytes
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.10
juniAcctngYellowDropPackets
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.11
juniAcctngYellowDropBytes
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.12
juniAcctngRedDropPackets
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.13
juniAcctngRedDropBytes
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.14
juniAcctngDropProfile
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.15
juniAcctngQueueProfile
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.16
juniAcctngSchedulerProfile
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.17
juniAcctngStatisticsProfile
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.18
juniAcctngShapingMode
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.19
juniAcctngShapingRate
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.20
juniAcctngBurst
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.21
juniAcctngAssuredRate
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.22
juniAcctngWeight
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.23
juniAcctngRedEnabled
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.24
juniAcctngSharedShapingMode
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.25
juniAcctngSharedShapingRate
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.26
juniAcctngByteAdjType
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.27
juniAcctngByteAdjBytes
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.2.7.28
juniAcctngConformance
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.3
juniAcctngGroups
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.3.1
juniAcctngCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.4874.2.2.24.3.2

Conformance

NameOIDStatus
juniAcctngBasicGroup
OBJECT-GROUP
Obsolete collection of objects providing control of the basic collection of accounting data for connection-less networks. This group became obsolete when juniAcctngSelectionSubtreeType was deprecated.
1.3.6.1.4.1.4874.2.2.24.3.1.1obsolete
juniAcctngBasicGroup2
OBJECT-GROUP
Obsolete collection of objects providing control of the basic collection of accounting data for connection-less networks. This group became obsolete when selection policy name and type objects were added.
1.3.6.1.4.1.4874.2.2.24.3.1.2obsolete
juniAcctngBasicGroup3
OBJECT-GROUP
Obsolete collection of objects providing control of the basic collection of accounting data for connection-less networks. This group became obsolete when the inteface control table was modified.
1.3.6.1.4.1.4874.2.2.24.3.1.3obsolete
juniAcctngDeprecatedGroup
OBJECT-GROUP
This group contains a deprecated object that is no longer recommended but may still be supported on some implemtations for backward compatibility.
1.3.6.1.4.1.4874.2.2.24.3.1.4deprecated
juniAcctngBasicGroup4
OBJECT-GROUP
Obsolete collection of objects providing control of the basic collection of accounting data for connection-less networks. This group became obsolete when the selection control table was modified.
1.3.6.1.4.1.4874.2.2.24.3.1.5current
juniAcctngBasicGroup5
OBJECT-GROUP
A collection of objects providing control of the basic collection of accounting data for connection-less networks.
1.3.6.1.4.1.4874.2.2.24.3.1.6obsolete
juniAcctngBasicGroup6
OBJECT-GROUP
A collection of objects providing control of the Virtual Router based accounting.
1.3.6.1.4.1.4874.2.2.24.3.1.7current
juniAcctngCompliance
MODULE-COMPLIANCE
Obsolete compliance statement for switches that implement the Juniper Accounting Control MIB. This statement became obsolete when the juniAcctngSelectionSubtreeType object was deprecated.
1.3.6.1.4.1.4874.2.2.24.3.2.1obsolete
juniAcctngCompliance2
MODULE-COMPLIANCE
Obsolete compliance statement for switches that implement the Juniper Accounting Control MIB. This statement became obsolete when selection policy name and type objects were added.
1.3.6.1.4.1.4874.2.2.24.3.2.2obsolete
juniAcctngCompliance3
MODULE-COMPLIANCE
Obsolete compliance statement for switches that implement the Juniper Accounting Control MIB. This statement became obsolete when the interface control table was modified.
1.3.6.1.4.1.4874.2.2.24.3.2.3obsolete
juniAcctngCompliance4
MODULE-COMPLIANCE
Obsolete compliance statement for switches that implement the Juniper Accounting Control MIB. This statement became obsolete when the selection control table was modified.
1.3.6.1.4.1.4874.2.2.24.3.2.4current
juniAcctngCompliance5
MODULE-COMPLIANCE
The compliance statement for switches that implement the Juniper Accounting Control MIB.
1.3.6.1.4.1.4874.2.2.24.3.2.5current
juniAcctngCompliance6
MODULE-COMPLIANCE
The compliance statement for switches that implement the Juniper Accounting Control MIB.
1.3.6.1.4.1.4874.2.2.24.3.2.6current