IRM3-MIB
- Registered at
- 1.3.6.1.4.1.52.1.2.1.11.3.6.1.4.1.52.1.2.1.21.3.6.1.4.1.52.1.2.1.31.3.6.1.4.1.52.1.2.1.71.3.6.1.4.1.52.1.2.1.81.3.6.1.4.1.52.1.2.1.91.3.6.1.4.1.52.1.2.2.11.3.6.1.4.1.52.1.2.2.21.3.6.1.4.1.52.1.2.2.31.3.6.1.4.1.52.1.2.2.41.3.6.1.4.1.52.1.6.1.1
- Namespace
- enterasys
- Source file
IRM3-MIB- Digest
sha256:4c39853d7bcc4981b3ee23bcded8859f4588dc94fd89252b84d65a8763e225c1
Imports
| From | Symbols |
|---|---|
| IRM-OIDS | repeaterRev1, repeaterRev2, subSysMMAC |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CTRON-OIDS IRM-OIDS IRM3-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Under this module's arcs
Where the registration tree carries on below this module.
| Arc | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.1.2.2.1.1 | commonD | REPEATER-MIB-2 |
| 1.3.6.1.4.1.52.1.2.2.1.2 | ethernetD | REPEATER-MIB-2 |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| device OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.1 | |||
| deviceMMACType OBJECT-TYPE Indicates the type of MMAC. | 1.3.6.1.4.1.52.1.2.1.1.2 | INTEGER {unknown(1), mMAC8(2), mMAC5(3), mMAC3(4), mINIMMAC(5), mRXI(6), m3Shunt(7), m5Shunt(8), m8FNB(9), nonFNB(10), mMAC3Shunting(11), mMAC5Shunting(12), mMAC8Shunting(13), m8Shunting(14)} | read-only | mandatory |
| deviceSlots OBJECT-TYPE Number of available device slots in this device, including the IRM slot. | 1.3.6.1.4.1.52.1.2.1.1.3 | INTEGER | read-only | mandatory |
| deviceOccupiedSlots OBJECT-TYPE The slots that contain MIM boards. This field is bit encoded (eg. if a bit is set then that board is present). For example, a value of 3 indicates that there are boards in the IRM slot and the first MIM slot. | 1.3.6.1.4.1.52.1.2.1.1.4 | INTEGER | read-only | mandatory |
| devicePortsOn OBJECT-TYPE The number of operating ports on the device. | 1.3.6.1.4.1.52.1.2.1.1.5 | INTEGER | read-only | mandatory |
| deviceTotalPorts OBJECT-TYPE The total number of repeater ports on the MMAC. | 1.3.6.1.4.1.52.1.2.1.1.6 | INTEGER | read-only | mandatory |
| deviceTotalPkts OBJECT-TYPE The number of packets detected on all ports of this device. | 1.3.6.1.4.1.52.1.2.1.1.7 | Counter | read-only | mandatory |
| deviceTotalErrors OBJECT-TYPE The sum of all of the errors listed including alignment, CRC, runts, giants, and out of window collisions. | 1.3.6.1.4.1.52.1.2.1.1.8 | Counter | read-only | mandatory |
| deviceTransmitColls OBJECT-TYPE The number of transmit collisions detected by this MMAC. | 1.3.6.1.4.1.52.1.2.1.1.9 | Counter | read-only | mandatory |
| deviceRecColls OBJECT-TYPE The number of receive collisions detected by this MMAC. | 1.3.6.1.4.1.52.1.2.1.1.10 | Counter | read-only | mandatory |
| deviceAlignErrs OBJECT-TYPE The number of packets with alignment errors detected. | 1.3.6.1.4.1.52.1.2.1.1.11 | Counter | read-only | mandatory |
| deviceCRCErrs OBJECT-TYPE The number of packets with bad CRC detected. | 1.3.6.1.4.1.52.1.2.1.1.12 | Counter | read-only | mandatory |
| deviceRunts OBJECT-TYPE The number of runt frames detected by this device. | 1.3.6.1.4.1.52.1.2.1.1.13 | Counter | read-only | mandatory |
| deviceOOWColls OBJECT-TYPE The number of out-of-window collisions detected by this device. | 1.3.6.1.4.1.52.1.2.1.1.14 | Counter | read-only | mandatory |
| deviceNoResources OBJECT-TYPE The number of No resource condtions detected by this device. | 1.3.6.1.4.1.52.1.2.1.1.15 | Counter | read-only | mandatory |
| deviceRecBytes OBJECT-TYPE The number of bytes detected on the network. | 1.3.6.1.4.1.52.1.2.1.1.16 | Counter | read-only | mandatory |
| deviceGiantFrames OBJECT-TYPE The number of packets longer than 1518 bytes. | 1.3.6.1.4.1.52.1.2.1.1.17 | Counter | read-only | mandatory |
| deviceRestart OBJECT-TYPE If this object is set to 1 the device is restarted. | 1.3.6.1.4.1.52.1.2.1.1.18 | INTEGER | read-write | mandatory |
| deviceResetCounters OBJECT-TYPE If this object is set to 1, all of the devices counters are reset to 0. | 1.3.6.1.4.1.52.1.2.1.1.19 | INTEGER | read-write | mandatory |
| deviceRedundantCts OBJECT-TYPE The number of redundant circuits available for use. | 1.3.6.1.4.1.52.1.2.1.1.20 | INTEGER | read-only | mandatory |
| deviceDiscover OBJECT-TYPE When this variable is set to 1 The following events occur: (1) The device sends a LINK-UP trap (2) The device sends a proprietary packet that will cause all other Cabeltron devices on that local network to send a LINK-UP trap. | 1.3.6.1.4.1.52.1.2.1.1.21 | INTEGER | read-write | deprecated |
| deviceTimeBase OBJECT-TYPE The number of seconds used as the interval for performing all of the rate alarm checks. The minimum is 10 secs. | 1.3.6.1.4.1.52.1.2.1.1.24 | INTEGER | read-write | mandatory |
| deviceResetRedundancy OBJECT-TYPE Setting this object to a 1 will reset redundancy for the entire box. | 1.3.6.1.4.1.52.1.2.1.1.25 | INTEGER | read-write | mandatory |
| deviceSrcAddrAgingTime OBJECT-TYPE The number of minutes that a source address is not detected before it is removed from the source address table. | 1.3.6.1.4.1.52.1.2.1.1.26 | INTEGER | read-write | mandatory |
| deviceSrcAddrTraps OBJECT-TYPE Controls sending of source address related traps. | 1.3.6.1.4.1.52.1.2.1.1.27 | INTEGER {trapsOff(1), trapsOn(2)} | read-write | mandatory |
| deviceSrcAddrLocked OBJECT-TYPE If this is set to 2, any source addresses that are detected on station ports that are not in the table will cause the port to be turned off. | 1.3.6.1.4.1.52.1.2.1.1.28 | INTEGER {lockOff(1), lockOn(2)} | read-write | mandatory |
| deviceEtherOccupiedSlots OBJECT-TYPE The slots that contain Ethernet MIM boards. This field is bit encoded (eg. if a bit is set then that board is present). For example, a value of 2 indicates that there is an Ethernet board in the first MIM slot. | 1.3.6.1.4.1.52.1.2.1.1.29 | INTEGER | read-only | mandatory |
| deviceTROccupiedSlots OBJECT-TYPE The slots that contain managable Token Ring MIM boards. This field is bit encoded (eg. if a bit is set then that board is present). For example, a value of 2 indicates that there is a managable Token Ring board in the first MIM slot. | 1.3.6.1.4.1.52.1.2.1.1.30 | INTEGER | read-only | mandatory |
| deviceFDDIOccupiedSlots OBJECT-TYPE The slots that contain FDDI MIM boards. This field is bit encoded (eg. if a bit is set then that board is present). For example, a value of 2 indicates that there is an FDDI board in the first MIM slot. | 1.3.6.1.4.1.52.1.2.1.1.31 | INTEGER | read-only | mandatory |
| deviceRestoreDefaults OBJECT-TYPE If this object is set to 1 the factory defaults are restored. This, however, does not affect the device's IP address. | 1.3.6.1.4.1.52.1.2.1.1.32 | INTEGER | read-write | mandatory |
| deviceActiveUsers OBJECT-TYPE The number of active users seen by this device. | 1.3.6.1.4.1.52.1.2.1.1.33 | INTEGER | read-only | mandatory |
| deviceOSIFrames OBJECT-TYPE The number of frames with OSI protocol seen by this device. | 1.3.6.1.4.1.52.1.2.1.1.34 | Counter | read-only | mandatory |
| deviceNovellFrames OBJECT-TYPE The number of frames with NOVELL protocol seen by this device. | 1.3.6.1.4.1.52.1.2.1.1.35 | Counter | read-only | mandatory |
| deviceBanyanFrames OBJECT-TYPE The number of frames with BANYAN protocol seen by this device. | 1.3.6.1.4.1.52.1.2.1.1.36 | Counter | read-only | mandatory |
| deviceDECNetFrames OBJECT-TYPE The number of frames with DECNET protocol seen by this device. | 1.3.6.1.4.1.52.1.2.1.1.37 | Counter | read-only | mandatory |
| deviceXNSFrames OBJECT-TYPE The number of frames with XNS protocol seen by this device. | 1.3.6.1.4.1.52.1.2.1.1.38 | Counter | read-only | mandatory |
| deviceIPFrames OBJECT-TYPE The number of frames with TCPIP protocol seen by this device. | 1.3.6.1.4.1.52.1.2.1.1.39 | Counter | read-only | mandatory |
| deviceCtronFrames OBJECT-TYPE The number of frames with Cabletron protocol seen by this device. | 1.3.6.1.4.1.52.1.2.1.1.40 | Counter | read-only | mandatory |
| deviceAppletalkFrames OBJECT-TYPE The number of frames with Appletalk protocol seen by this device. | 1.3.6.1.4.1.52.1.2.1.1.41 | Counter | read-only | mandatory |
| deviceOtherFrames OBJECT-TYPE The number of frames seen by this device, that do not fall into any of the previously listed protocol catagories. | 1.3.6.1.4.1.52.1.2.1.1.42 | Counter | read-only | mandatory |
| device64To127Frames OBJECT-TYPE The number of frames seen by this device, with frame sizes between 64 and 127 bytes. | 1.3.6.1.4.1.52.1.2.1.1.43 | Counter | read-only | mandatory |
| device128To255Frames OBJECT-TYPE The number of frames seen by this device, with frame sizes between 128 and 255 bytes. | 1.3.6.1.4.1.52.1.2.1.1.44 | Counter | read-only | mandatory |
| device256To511Frames OBJECT-TYPE The number of frames seen by this device, with frame sizes between 256 and 511 bytes. | 1.3.6.1.4.1.52.1.2.1.1.45 | Counter | read-only | mandatory |
| device512To1023Frames OBJECT-TYPE The number of frames seen by this device, with frame sizes between 512 and 1023 bytes. | 1.3.6.1.4.1.52.1.2.1.1.46 | Counter | read-only | mandatory |
| device1024To1518Frames OBJECT-TYPE The number of frames seen by this device, with frame sizes between 1024 and 1518 bytes. | 1.3.6.1.4.1.52.1.2.1.1.47 | Counter | read-only | mandatory |
| deviceBroadPkts OBJECT-TYPE The sum of broadcast packets detected on all ports of this device. | 1.3.6.1.4.1.52.1.2.1.1.48 | Counter | read-only | mandatory |
| deviceMultPkts OBJECT-TYPE The sum of multicast packets detected on all ports of this device. | 1.3.6.1.4.1.52.1.2.1.1.49 | Counter | read-only | mandatory |
| deviceThdPartyOccupiedSlots OBJECT-TYPE The slots that contain Third Party MIM boards. This field is bit encoded (eg. if a bit is set then that board is present). For example, a value of 2 indicates that there is a Third Party board in the first MIM slot. | 1.3.6.1.4.1.52.1.2.1.1.51 | INTEGER | read-only | mandatory |
| deviceImimOccupiedSlots OBJECT-TYPE The slots that contain Cabletron Intelligent MIM boards. This field is bit encoded (eg. if a bit is set then that board is present). For example, a value of 2 indicates that there is an Intelligent board in the first MIM slot. | 1.3.6.1.4.1.52.1.2.1.1.52 | INTEGER | read-only | mandatory |
| deviceLinkTraps OBJECT-TYPE Controls sending of link related traps. | 1.3.6.1.4.1.52.1.2.1.1.54 | INTEGER {trapsOff(1), trapsOn(2)} | read-write | mandatory |
| ctIPDefaultFrameType OBJECT-TYPE Defines the default frame type that will be used by the device. A device will understand both frame types and will respond based upon the framing type that is learned for the given address. This object defines the type of framing that will be used if no framing is known, for example ARP requests. Setting a value of 8022snap(2) will result in framing 802.3 - 802.2 - IP packets being generated by default. Setting a value of ethernet(1) will result in framing ethernet IP packets by default. | 1.3.6.1.4.1.52.1.2.1.1.56 | INTEGER {ethernet(1), snap8022(2)} | read-write | mandatory |
| deviceSrcAddrType OBJECT-TYPE Selects the hashing algorithm of source addresses, DEC or IP | 1.3.6.1.4.1.52.1.2.1.1.57 | INTEGER {ipHash(1), decHash(2)} | read-write | mandatory |
| board OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.2 | |||
| port OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.3 | |||
| sourceAddr OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.7 | |||
| sourceAddrBoard OBJECT-TYPE The board number of the port that the supplied source address has been found on. | 1.3.6.1.4.1.52.1.2.1.7.1 | INTEGER | read-only | mandatory |
| sourceAddrPort OBJECT-TYPE The port number of the port that the supplied source address has been found on. | 1.3.6.1.4.1.52.1.2.1.7.2 | INTEGER | read-only | mandatory |
| redundancy OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.8 | |||
| redundancyPollInterval OBJECT-TYPE The number of seconds between polls for redundancy. | 1.3.6.1.4.1.52.1.2.1.8.1 | INTEGER | read-write | mandatory |
| redundancyTestTod OBJECT-TYPE The time of day at which the redundant circuits should be tested. | 1.3.6.1.4.1.52.1.2.1.8.2 | OCTET STRING | read-write | mandatory |
| redundancyPerformTest OBJECT-TYPE Test the redundant circuit. | 1.3.6.1.4.1.52.1.2.1.8.3 | INTEGER {performTest(1)} | read-write | mandatory |
| redundancyCircuitName OBJECT-TYPE The name of the indicated circuit. | 1.3.6.1.4.1.52.1.2.1.8.4 | OCTET STRING | read-write | mandatory |
| redundancyRetryCount OBJECT-TYPE The number of unanswered polls allowed for the indicated circuit before the current connection is declared bad. | 1.3.6.1.4.1.52.1.2.1.8.5 | INTEGER | read-write | mandatory |
| redundancyNumBPs OBJECT-TYPE The number of board/port combinations associated with the indicated circuit. | 1.3.6.1.4.1.52.1.2.1.8.6 | INTEGER | read-only | mandatory |
| redundancyCircuitBoard OBJECT-TYPE The boards associated with the indicated circuit. | 1.3.6.1.4.1.52.1.2.1.8.7 | INTEGER | read-only | mandatory |
| redundancyCircuitPort OBJECT-TYPE The ports associated with the indicated circuit. | 1.3.6.1.4.1.52.1.2.1.8.8 | INTEGER | read-only | mandatory |
| redundancyCircuitTypes OBJECT-TYPE The type of each port associated with the indicated circuit. | 1.3.6.1.4.1.52.1.2.1.8.9 | INTEGER | read-only | mandatory |
| redundancyCircuitNumAddr OBJECT-TYPE The number of addresses associated with the indicated circuit. | 1.3.6.1.4.1.52.1.2.1.8.10 | INTEGER | read-only | mandatory |
| redundancyCircuitMACAddrAdd OBJECT-TYPE Adds this ethernet address to the polling list for the indicated circuit. | 1.3.6.1.4.1.52.1.2.1.8.11 | IpAddress | read-write | mandatory |
| redundancyCircuitMACAddrDel OBJECT-TYPE Removes this ethernet address from the polling list for the indicated circuit. | 1.3.6.1.4.1.52.1.2.1.8.12 | IpAddress | read-write | mandatory |
| redundancyCircuitMACAddrDisp OBJECT-TYPE The ethernet addresses associated with the indicated circuit, accessed by index. | 1.3.6.1.4.1.52.1.2.1.8.13 | IpAddress | read-only | mandatory |
| redundancyCircuitEnable OBJECT-TYPE Enables and disables the indicated circuit. | 1.3.6.1.4.1.52.1.2.1.8.14 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| redundancyCircuitReset OBJECT-TYPE Reset the indicated circuit. Return all of the associated board and ports to NOT-USED, remove associated addresses from the polling list, reset the circuit name and retry count to default values. | 1.3.6.1.4.1.52.1.2.1.8.15 | INTEGER {reset(1)} | read-write | mandatory |
| alarm OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9 | |||
| devAlrm OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.1 | |||
| devTraffic OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.1.1 | |||
| devTrafficEnable OBJECT-TYPE Enable the sending of device level traffic traps. | 1.3.6.1.4.1.52.1.2.1.9.1.1.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| devTrafficThreshold OBJECT-TYPE The threshold of packets within the Devicetimebase that will cause a traffic alarm. | 1.3.6.1.4.1.52.1.2.1.9.1.1.2 | INTEGER | read-write | mandatory |
| devColls OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.1.2 | |||
| devCollsEnable OBJECT-TYPE Enable the sending of device level collision alarms. | 1.3.6.1.4.1.52.1.2.1.9.1.2.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| devCollsThreshold OBJECT-TYPE This object represents the number of collisions per good packet measured by the device that will generate an alarm. | 1.3.6.1.4.1.52.1.2.1.9.1.2.2 | INTEGER (1..15) | read-write | mandatory |
| devError OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.1.3 | |||
| devErrorEnable OBJECT-TYPE Enable the sending of device level error alarms. | 1.3.6.1.4.1.52.1.2.1.9.1.3.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| devErrorThreshold OBJECT-TYPE This object represents the percentage of errors per good packet that will generate an alarm. | 1.3.6.1.4.1.52.1.2.1.9.1.3.2 | INTEGER | read-write | mandatory |
| devErrorSource OBJECT-TYPE The type of error used for the error alarm. The integer is a bit encoded version of which errors to include in the error sum. The bits are encoded as follows: CRCErrors - Bit 0 - Least Significant Bit runts - Bit 1 OOWColls - Bit 2 alignErrs - Bit 3 NoResource - Bit 4 Giants - Bit 5 | 1.3.6.1.4.1.52.1.2.1.9.1.3.3 | INTEGER | read-write | mandatory |
| devBroad OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.1.4 | |||
| devBroadEnable OBJECT-TYPE Enable the sending of device level broadcast traps. | 1.3.6.1.4.1.52.1.2.1.9.1.4.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| devBroadThreshold OBJECT-TYPE The threshold of broadcast packets within the Devicetimebase that will cause a broadcast alarm. | 1.3.6.1.4.1.52.1.2.1.9.1.4.2 | INTEGER | read-write | mandatory |
| bdAlrm OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.2 | |||
| bdTraffic OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.2.1 | |||
| bdTrafficEnable OBJECT-TYPE Enable the sending of board level traffic traps for this board. | 1.3.6.1.4.1.52.1.2.1.9.2.1.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| bdTrafficThreshold OBJECT-TYPE The threshold of packets within the Devicetimebase that will cause a traffic alarm. | 1.3.6.1.4.1.52.1.2.1.9.2.1.2 | INTEGER | read-write | mandatory |
| bdTrafficBdDisable OBJECT-TYPE Permit a board to be disabled on a traffic threshold alarm. | 1.3.6.1.4.1.52.1.2.1.9.2.1.3 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| bdColls OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.2.2 | |||
| bdCollsEnable OBJECT-TYPE Enable the sending of board level collision alarms. | 1.3.6.1.4.1.52.1.2.1.9.2.2.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| bdCollsThreshold OBJECT-TYPE This object represents the number of collisions per good packet measured by the board that will generate an alarm. | 1.3.6.1.4.1.52.1.2.1.9.2.2.2 | INTEGER (1..15) | read-write | mandatory |
| bdCollsBdDisable OBJECT-TYPE Permit a board to be disabled on a collision threshold alarm. | 1.3.6.1.4.1.52.1.2.1.9.2.2.3 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| bdError OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.2.3 | |||
| bdErrorEnable OBJECT-TYPE Enable the sending of board level error alarms. | 1.3.6.1.4.1.52.1.2.1.9.2.3.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| bdErrorThreshold OBJECT-TYPE This object represents the percentage of errors per good packet that will generate an alarm. | 1.3.6.1.4.1.52.1.2.1.9.2.3.2 | INTEGER | read-write | mandatory |
| bdErrorSource OBJECT-TYPE The type of error used for the error alarm. The integer is a bit encoded version of which errors to include in the error sum. The bits are encoded as follows: CRCErrors - Bit 0 Least Significant Bit runts - Bit 1 OOWColls - Bit 2 alignErrs - Bit 3 NoResource - Bit 4 Giants - Bit 5 | 1.3.6.1.4.1.52.1.2.1.9.2.3.3 | INTEGER | read-write | mandatory |
| bdErrorBdDisable OBJECT-TYPE Permit a board to be disabled on an error threshold alarm. | 1.3.6.1.4.1.52.1.2.1.9.2.3.4 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| bdBroad OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.2.4 | |||
| bdBroadEnable OBJECT-TYPE Enable the sending of board level broadcast traps for this board. | 1.3.6.1.4.1.52.1.2.1.9.2.4.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| bdBroadThreshold OBJECT-TYPE The threshold of broadcast packets within the Devicetimebase that will cause a broadcast alarm. | 1.3.6.1.4.1.52.1.2.1.9.2.4.2 | INTEGER | read-write | mandatory |
| bdBroadDisable OBJECT-TYPE Permit a board to be disabled on a broadcast threshold alarm. | 1.3.6.1.4.1.52.1.2.1.9.2.4.3 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| portAlrm OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.3 | |||
| portTraffic OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.3.1 | |||
| portTrafficEnable OBJECT-TYPE Enable the sending of port level traffic traps for this port. | 1.3.6.1.4.1.52.1.2.1.9.3.1.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| portTrafficThreshold OBJECT-TYPE The threshold of packets within the Devicetimebase that will cause a traffic alarm. | 1.3.6.1.4.1.52.1.2.1.9.3.1.2 | INTEGER | read-write | mandatory |
| portTrafficPortDisable OBJECT-TYPE Permit a port to be disabled on a traffic threshold alarm. | 1.3.6.1.4.1.52.1.2.1.9.3.1.3 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| portColls OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.3.2 | |||
| portCollsEnable OBJECT-TYPE Enable the sending of port level collsion alarms. | 1.3.6.1.4.1.52.1.2.1.9.3.2.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| portCollsThreshold OBJECT-TYPE This object represents the number of collisions per good packet measured by the port that will generate an alarm. | 1.3.6.1.4.1.52.1.2.1.9.3.2.2 | INTEGER (1..15) | read-write | mandatory |
| portCollsPortDisable OBJECT-TYPE Permit a port to be disabled on a collision threshold alarm. | 1.3.6.1.4.1.52.1.2.1.9.3.2.3 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| portError OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.3.3 | |||
| portErrorEnable OBJECT-TYPE Enable the sending of port level error alarms. | 1.3.6.1.4.1.52.1.2.1.9.3.3.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| portErrorThreshold OBJECT-TYPE This object represents the percentage of errors per good packet that will generate an alarm. | 1.3.6.1.4.1.52.1.2.1.9.3.3.2 | INTEGER | read-write | mandatory |
| portErrorSource OBJECT-TYPE The type of error used for the error alarm. The integer is a bit encoded version of which errors to include in the error sum. The bits are encoded as follows: CRCErrors - Bit 0 - Least Significant Bit runts - Bit 1 OOWColls - Bit 2 alignErrs - Bit 3 NoResource - Bit 4 Giants - Bit 5 | 1.3.6.1.4.1.52.1.2.1.9.3.3.3 | INTEGER | read-write | mandatory |
| portErrorPortDisable OBJECT-TYPE Permit a port to be disabled on an error threshold alarm. | 1.3.6.1.4.1.52.1.2.1.9.3.3.4 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| portBroad OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.3.4 | |||
| portBroadEnable OBJECT-TYPE Enable the sending of port level broadcast alarms. | 1.3.6.1.4.1.52.1.2.1.9.3.4.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| portBroadThreshold OBJECT-TYPE The threshold of broadcast packets within the Devicetimebase that will cause a broadcast alarm. | 1.3.6.1.4.1.52.1.2.1.9.3.4.2 | INTEGER | read-write | mandatory |
| portBroadDisable OBJECT-TYPE Permit a port to be disabled on a broadcast threshold alarm. | 1.3.6.1.4.1.52.1.2.1.9.3.4.3 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| deviceR2 OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.1 | |||
| tokenRingD OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.1.3 | |||
| deviceTRPortsOn OBJECT-TYPE This gives the number of Token Ring ports enabled on this device. | 1.3.6.1.4.1.52.1.2.2.1.3.1 | INTEGER | read-only | mandatory |
| deviceTRPorts OBJECT-TYPE This gives the total number of Token Ring ports on this device. | 1.3.6.1.4.1.52.1.2.2.1.3.2 | INTEGER | read-only | mandatory |
| deviceTRRingPortsOn OBJECT-TYPE This gives the number of Token Ring ring ports that are enabled. | 1.3.6.1.4.1.52.1.2.2.1.3.3 | INTEGER | read-only | mandatory |
| deviceTRRingPorts OBJECT-TYPE This gives the total number of Token Ring ring ports on this device. | 1.3.6.1.4.1.52.1.2.2.1.3.4 | INTEGER | read-only | mandatory |
| deviceTRLans OBJECT-TYPE This gives the number of Token Rings formed on this device. | 1.3.6.1.4.1.52.1.2.2.1.3.5 | INTEGER | read-only | mandatory |
| deviceTRBoards OBJECT-TYPE This returns the number of Token Ring boards on the device. | 1.3.6.1.4.1.52.1.2.2.1.3.6 | INTEGER | read-only | mandatory |
| deviceTRBoardMap OBJECT-TYPE The slots that contain Token Ring MIM boards. This field is bit encoded (eg. if a bit is set then that board is present). For example, a value of 2 indicates that there is a Token Ring board in the first MIM slot. | 1.3.6.1.4.1.52.1.2.2.1.3.7 | INTEGER | read-only | mandatory |
| networkR2 OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.2 | |||
| boardR2 OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.3 | |||
| commonB OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.3.1 | |||
| boardIndex OBJECT-TYPE The slot number of this board. | 1.3.6.1.4.1.52.1.2.2.3.1.1 | INTEGER | read-only | mandatory |
| boardName OBJECT-TYPE The name of the board. This field will only contain printable ASCII characters. | 1.3.6.1.4.1.52.1.2.2.3.1.2 | DisplayString | read-write | mandatory |
| boardType OBJECT-TYPE The type of the MIM. (eg. FOT, TPT, etc). See appendix A for encoding. | 1.3.6.1.4.1.52.1.2.2.3.1.3 | INTEGER | read-only | mandatory |
| boardTotalPorts OBJECT-TYPE Total number of ports supported on this board. | 1.3.6.1.4.1.52.1.2.2.3.1.4 | INTEGER | read-only | mandatory |
| boardStatus OBJECT-TYPE The administrative status of this MIM. | 1.3.6.1.4.1.52.1.2.2.3.1.5 | INTEGER {disabled(1), enabled(2)} | read-write | deprecated |
| boardPortsOn OBJECT-TYPE The number of operating ports on the board. | 1.3.6.1.4.1.52.1.2.2.3.1.6 | INTEGER | read-only | mandatory |
| boardOper OBJECT-TYPE Returns a value indicating whether any of the enabled ports on the board are not operational, thereby placing the board in a non-operational state. | 1.3.6.1.4.1.52.1.2.2.3.1.7 | INTEGER {operational(1), notOperational(2)} | read-only | deprecated |
| boardActiveUsers OBJECT-TYPE The number of active users seen on this board. | 1.3.6.1.4.1.52.1.2.2.3.1.8 | INTEGER | read-only | mandatory |
| ethernetB OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.3.2 | |||
| boardTotalPkts OBJECT-TYPE The total number of packets this board has seen since the last reset. | 1.3.6.1.4.1.52.1.2.2.3.2.1 | Counter | read-only | mandatory |
| boardErrorPkts OBJECT-TYPE The number of packets that have experienced an error. | 1.3.6.1.4.1.52.1.2.2.3.2.2 | Counter | read-only | mandatory |
| boardTransColls OBJECT-TYPE The number of transmit collisions this board has detected. | 1.3.6.1.4.1.52.1.2.2.3.2.3 | Counter | read-only | mandatory |
| boardRecColls OBJECT-TYPE The number of Receive mode collisions this board has detected. | 1.3.6.1.4.1.52.1.2.2.3.2.4 | Counter | read-only | mandatory |
| boardAlignErrs OBJECT-TYPE The number of misaligned frames this board has detected. | 1.3.6.1.4.1.52.1.2.2.3.2.5 | Counter | read-only | mandatory |
| boardCRCErrs OBJECT-TYPE The number of packets with bad CRC detected. | 1.3.6.1.4.1.52.1.2.2.3.2.6 | Counter | read-only | mandatory |
| boardRunts OBJECT-TYPE The number of runt frames detected by this board. | 1.3.6.1.4.1.52.1.2.2.3.2.7 | Counter | read-only | mandatory |
| boardOOWColls OBJECT-TYPE The number of out-of-window collisions detected by this board. | 1.3.6.1.4.1.52.1.2.2.3.2.8 | Counter | read-only | mandatory |
| boardNoResources OBJECT-TYPE The number of times the no resources condition was detected for this board. | 1.3.6.1.4.1.52.1.2.2.3.2.9 | Counter | read-only | mandatory |
| boardRecBytes OBJECT-TYPE The number of bytes detected on this board. | 1.3.6.1.4.1.52.1.2.2.3.2.10 | Counter | read-only | mandatory |
| boardGiants OBJECT-TYPE The number of packets longer than 1518 bytes detected on this board. | 1.3.6.1.4.1.52.1.2.2.3.2.11 | Counter | read-only | mandatory |
| boardOSIFrames OBJECT-TYPE The number of frames with OSI protocol seen by this board. | 1.3.6.1.4.1.52.1.2.2.3.2.12 | Counter | read-only | mandatory |
| boardNovellFrames OBJECT-TYPE The number of frames with NOVELL protocol seen by this board. | 1.3.6.1.4.1.52.1.2.2.3.2.13 | Counter | read-only | mandatory |
| boardBanyanFrames OBJECT-TYPE The number of frames with BANYAN protocol seen by this board. | 1.3.6.1.4.1.52.1.2.2.3.2.14 | Counter | read-only | mandatory |
| boardDECNetFrames OBJECT-TYPE The number of frames with DECNET protocol seen by this board. | 1.3.6.1.4.1.52.1.2.2.3.2.15 | Counter | read-only | mandatory |
| boardXNSFrames OBJECT-TYPE The number of frames with XNS protocol seen by this board. | 1.3.6.1.4.1.52.1.2.2.3.2.16 | Counter | read-only | mandatory |
| boardIPFrames OBJECT-TYPE The number of frames with TCPIP protocol seen by this board. | 1.3.6.1.4.1.52.1.2.2.3.2.17 | Counter | read-only | mandatory |
| boardCtronFrames OBJECT-TYPE The number of frames with Cabletron protocol seen by this board. | 1.3.6.1.4.1.52.1.2.2.3.2.18 | Counter | read-only | mandatory |
| boardAppletalkFrames OBJECT-TYPE The number of frames with Appletalk protocol seen by this board. | 1.3.6.1.4.1.52.1.2.2.3.2.19 | Counter | read-only | mandatory |
| boardOtherFrames OBJECT-TYPE The number of frames seen by this board, that do not fall into any of the previously listed protocol catagories. | 1.3.6.1.4.1.52.1.2.2.3.2.20 | Counter | read-only | mandatory |
| board64To127Frames OBJECT-TYPE The number of frames seen by this board, with frame sizes between 64 and 127 bytes. | 1.3.6.1.4.1.52.1.2.2.3.2.21 | Counter | read-only | mandatory |
| board128To255Frames OBJECT-TYPE The number of frames seen by this board, with frame sizes between 128 and 255 bytes. | 1.3.6.1.4.1.52.1.2.2.3.2.22 | Counter | read-only | mandatory |
| board256To511Frames OBJECT-TYPE The number of frames seen by this board, with frame sizes between 256 and 511 bytes. | 1.3.6.1.4.1.52.1.2.2.3.2.23 | Counter | read-only | mandatory |
| board512To1023Frames OBJECT-TYPE The number of frames seen by this board, with frame sizes between 512 and 1023 bytes. | 1.3.6.1.4.1.52.1.2.2.3.2.24 | Counter | read-only | mandatory |
| board1024To1518Frames OBJECT-TYPE The number of frames seen by this board, with frame sizes between 1024 and 1518 bytes. | 1.3.6.1.4.1.52.1.2.2.3.2.25 | Counter | read-only | mandatory |
| boardBroadPkts OBJECT-TYPE The sum of broadcast packets detected on all ports of this board. | 1.3.6.1.4.1.52.1.2.2.3.2.26 | Counter | read-only | mandatory |
| boardMultPkts OBJECT-TYPE The sum of multicast packets detected on all ports of this board. | 1.3.6.1.4.1.52.1.2.2.3.2.27 | Counter | read-only | mandatory |
| boardSrcAddrLocked OBJECT-TYPE If this is set to 2, any source addresses that are detected on station port that are not in the table will cause the port to be turned off. | 1.3.6.1.4.1.52.1.2.2.3.2.31 | INTEGER {lockOff(1), lockOn(2)} | read-write | mandatory |
| tokenRingB OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.3.3 | |||
| boardTotalRingPorts OBJECT-TYPE The total number of ring ports on this board. | 1.3.6.1.4.1.52.1.2.2.3.3.1 | INTEGER | read-only | mandatory |
| boardTotalStationPorts OBJECT-TYPE The total number of station ports on this board. | 1.3.6.1.4.1.52.1.2.2.3.3.2 | INTEGER | read-only | mandatory |
| boardModeStatus OBJECT-TYPE This describes the mode of this board. autoMode means the board is using the hardware defaults. mgmtMode means the board is using setting by the user. | 1.3.6.1.4.1.52.1.2.2.3.3.3 | INTEGER {mgmtMode(1), autoMOde(2)} | read-write | mandatory |
| boardTotalRingPortsOn OBJECT-TYPE The number of enabled ring ports on this board. | 1.3.6.1.4.1.52.1.2.2.3.3.4 | INTEGER | read-only | mandatory |
| boardTotalStationPortsOn OBJECT-TYPE The number of enabled station ports on this board. | 1.3.6.1.4.1.52.1.2.2.3.3.5 | INTEGER | read-only | mandatory |
| boardSpeed OBJECT-TYPE The speed of the board. The board will expect to receive data at this speed. | 1.3.6.1.4.1.52.1.2.2.3.3.6 | INTEGER {fourMHz(4), sixteenMhz(16)} | read-write | mandatory |
| ringSpeedFault OBJECT-TYPE Data speed of station mismatches configuration speed of board. Board is automatically bypassed. | 1.3.6.1.4.1.52.1.2.2.3.3.7 | INTEGER {noFaultDetected(1), faultDetected(2)} | read-only | mandatory |
| boardSpeedFaultPort OBJECT-TYPE This object indicates which ring speed detect circuit(s) caused the fault, if there was one. The return code indicates the location on the board feeding the speed detect circuit(s). Ring in means the circuit on the back-up path between the ring out port and the ring in port. FNB means the circuit between the ring in port and the FNB. NotApplicable means that a ring Speed Fault has not occurred. Since more than one circuit can cause the fault, the return code is the sum of the following values: 1 - FNB 2 - RingIn 4 - RingOut 8 - NotApplicable | 1.3.6.1.4.1.52.1.2.2.3.3.8 | INTEGER | read-only | mandatory |
| boardFirstRingPort OBJECT-TYPE This object defines which port on the board is the first ring port. All ring port numbers will be consecutive. Using this in conjunction with BoardRingPorts, all ring port numbers can be determined. | 1.3.6.1.4.1.52.1.2.2.3.3.9 | INTEGER | read-only | mandatory |
| boardBypassRingPortState OBJECT-TYPE This object sets and reports the state of the ring bypass relay on boards which contain a ring bypass relay. The ring bypass relay will separate only the ring ports from the FNB. The FNB only bypasses the station ports on these boards. The illegal value (3) will return an error status if set. | 1.3.6.1.4.1.52.1.2.2.3.3.10 | INTEGER {off(1), on(2), illegal(3)} | read-write | mandatory |
| fDDIB OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.3.4 | |||
| portR2 OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.4 | |||
| commonP OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.4.1 | |||
| portIndex OBJECT-TYPE The slot number of this port. | 1.3.6.1.4.1.52.1.2.2.4.1.1 | INTEGER | read-only | mandatory |
| portMediaType OBJECT-TYPE The type of the port. (eg. FOT, TPT, etc). | 1.3.6.1.4.1.52.1.2.2.4.1.2 | INTEGER {bnc(1), aui(2), tp(3), tenbt(4), fot(5), laser(6), stp(7), utp(8), fo(9), otherMedia(10)} | read-only | mandatory |
| portAdminState OBJECT-TYPE The administrative status of this port. | 1.3.6.1.4.1.52.1.2.2.4.1.3 | INTEGER {off(1), on(2)} | read-write | mandatory |
| portSourceAddr OBJECT-TYPE A source address that has been seen on this port. | 1.3.6.1.4.1.52.1.2.2.4.1.4 | OCTET STRING | read-only | mandatory |
| portOper OBJECT-TYPE Returns a value indicating whether this port is in an operational state. | 1.3.6.1.4.1.52.1.2.2.4.1.5 | INTEGER {notOperational(1), operational(2)} | read-only | mandatory |
| portActiveUsers OBJECT-TYPE The number of active users seen on this port. | 1.3.6.1.4.1.52.1.2.2.4.1.6 | INTEGER | read-only | mandatory |
| portName OBJECT-TYPE The name of the port. this field will only contain printable ASCII characters. | 1.3.6.1.4.1.52.1.2.2.4.1.7 | DisplayString | read-write | mandatory |
| ethernetP OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.4.2 | |||
| portTopologyType OBJECT-TYPE The topological type of the port. | 1.3.6.1.4.1.52.1.2.2.4.2.1 | INTEGER {stations(1), trunk(2)} | read-only | mandatory |
| portLinkStatus OBJECT-TYPE The state of the link signal for this port. | 1.3.6.1.4.1.52.1.2.2.4.2.2 | INTEGER {linkSignalInactive(1), linkSignalActive(2), linkSignalNotSupported(3)} | read-only | mandatory |
| portStatus OBJECT-TYPE The network state of this port. | 1.3.6.1.4.1.52.1.2.2.4.2.3 | INTEGER {active(1), segmented(2)} | read-only | mandatory |
| portTotalPkts OBJECT-TYPE The total number of packets this port has seen since the last reset. | 1.3.6.1.4.1.52.1.2.2.4.2.4 | Counter | read-only | mandatory |
| portErrorPkts OBJECT-TYPE The number of packets that have experienced an error. | 1.3.6.1.4.1.52.1.2.2.4.2.5 | Counter | read-only | mandatory |
| portXmitColls OBJECT-TYPE The number of Transmit mode collisions this port has detected. | 1.3.6.1.4.1.52.1.2.2.4.2.6 | Counter | read-only | mandatory |
| portRecColls OBJECT-TYPE The number of Receive mode collisions this port has detected. | 1.3.6.1.4.1.52.1.2.2.4.2.7 | Counter | read-only | mandatory |
| portAlignErrs OBJECT-TYPE The number of misaligned frames this port has detected. | 1.3.6.1.4.1.52.1.2.2.4.2.8 | Counter | read-only | mandatory |
| portCRCErrs OBJECT-TYPE The number of packets with bad CRC detected. | 1.3.6.1.4.1.52.1.2.2.4.2.9 | Counter | read-only | mandatory |
| portRunts OBJECT-TYPE The number of runt frames detected by this port. | 1.3.6.1.4.1.52.1.2.2.4.2.10 | Counter | read-only | mandatory |
| portOOWColls OBJECT-TYPE The number of out-of-window collisions detected by this port. | 1.3.6.1.4.1.52.1.2.2.4.2.11 | Counter | read-only | mandatory |
| portNoResorces OBJECT-TYPE The number of times the no resource condition is detected on this port. | 1.3.6.1.4.1.52.1.2.2.4.2.12 | Counter | read-only | mandatory |
| portRecBytes OBJECT-TYPE The number of bytes detected on the network. | 1.3.6.1.4.1.52.1.2.2.4.2.13 | Counter | read-only | mandatory |
| portGiants OBJECT-TYPE The number of frames longer than 1518 bytes detected on this port. | 1.3.6.1.4.1.52.1.2.2.4.2.14 | Counter | read-only | mandatory |
| portRedundCrt OBJECT-TYPE The redundant circuit with which this port is associated. | 1.3.6.1.4.1.52.1.2.2.4.2.15 | INTEGER | read-write | mandatory |
| portRedundType OBJECT-TYPE The type of port this port is in the redundant circuit. The port must be associated with a redundant circuit first, using the object portRedundCrt. | 1.3.6.1.4.1.52.1.2.2.4.2.16 | INTEGER {notUsed(1), primary(2), backup(3)} | read-write | mandatory |
| portRedundStatus OBJECT-TYPE The current state of this port is in the redundant circuit. The port must be associated with a redundant circuit first, using the object portRedundCrt. | 1.3.6.1.4.1.52.1.2.2.4.2.17 | INTEGER {notUsed(1), active(2), inactive(3)} | read-write | mandatory |
| portForceTrunkType OBJECT-TYPE This variable forces a port to be a trunk port. | 1.3.6.1.4.1.52.1.2.2.4.2.18 | INTEGER {notForced(1), forced(2)} | read-write | mandatory |
| portOSIFrames OBJECT-TYPE The number of frames with OSI protocol seen by this port. | 1.3.6.1.4.1.52.1.2.2.4.2.19 | Counter | read-only | mandatory |
| portNovellFrames OBJECT-TYPE The number of frames with NOVELL protocol seen by this port. | 1.3.6.1.4.1.52.1.2.2.4.2.20 | Counter | read-only | mandatory |
| portBanyanFrames OBJECT-TYPE The number of frames with BANYAN protocol seen by this port. | 1.3.6.1.4.1.52.1.2.2.4.2.21 | Counter | read-only | mandatory |
| portDECNetFrames OBJECT-TYPE The number of frames with DECNET protocol seen by this port. | 1.3.6.1.4.1.52.1.2.2.4.2.22 | Counter | read-only | mandatory |
| portXNSFrames OBJECT-TYPE The number of frames with XNS protocol seen by this port. | 1.3.6.1.4.1.52.1.2.2.4.2.23 | Counter | read-only | mandatory |
| portIPFrames OBJECT-TYPE The number of frames with TCPIP protocol seen by this port. | 1.3.6.1.4.1.52.1.2.2.4.2.24 | Counter | read-only | mandatory |
| portCtronFrames OBJECT-TYPE The number of frames with Cabletron protocol seen by this port. | 1.3.6.1.4.1.52.1.2.2.4.2.25 | Counter | read-only | mandatory |
| portAppletalkFrames OBJECT-TYPE The number of frames with Appletalk protocol seen by this port. | 1.3.6.1.4.1.52.1.2.2.4.2.26 | Counter | read-only | mandatory |
| portOtherFrames OBJECT-TYPE The number of frames seen by this port, that do not fall into any of the previously listed protocol catagories. | 1.3.6.1.4.1.52.1.2.2.4.2.27 | Counter | read-only | mandatory |
| port64To127Frames OBJECT-TYPE The number of frames seen by this port, with frame sizes between 64 and 127 bytes. | 1.3.6.1.4.1.52.1.2.2.4.2.28 | Counter | read-only | mandatory |
| port128To255Frames OBJECT-TYPE The number of frames seen by this port, with frame sizes between 128 and 255 bytes. | 1.3.6.1.4.1.52.1.2.2.4.2.29 | Counter | read-only | mandatory |
| port256To511Frames OBJECT-TYPE The number of frames seen by this port, with frame sizes between 256 and 511 bytes. | 1.3.6.1.4.1.52.1.2.2.4.2.30 | Counter | read-only | mandatory |
| port512To1023Frames OBJECT-TYPE The number of frames seen by this port, with frame sizes between 512 and 1023 bytes. | 1.3.6.1.4.1.52.1.2.2.4.2.31 | Counter | read-only | mandatory |
| port1024To1518Frames OBJECT-TYPE The number of frames seen by this port, with frame sizes between 1024 and 1518 bytes. | 1.3.6.1.4.1.52.1.2.2.4.2.32 | Counter | read-only | mandatory |
| portBroadPkts OBJECT-TYPE The sum of broadcast packets detected on this port. | 1.3.6.1.4.1.52.1.2.2.4.2.33 | Counter | read-only | mandatory |
| portMultPkts OBJECT-TYPE The sum of multicast packets detected on this port. | 1.3.6.1.4.1.52.1.2.2.4.2.34 | Counter | read-only | mandatory |
| portSrcAddrLocked OBJECT-TYPE If this is set to 2, any source addresses that are detected on station ports that are not in the table will cause the port to be turned off. | 1.3.6.1.4.1.52.1.2.2.4.2.38 | INTEGER {lockOff(1), lockOn(2)} | read-write | mandatory |
| tokenRingP OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.4.3 | |||
| stationP OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.4.3.1 | |||
| stationPortLinkStatus OBJECT-TYPE When station is supplying phantom current the Link Signal is active. When there is no phantom current the Link Signal is inactive. | 1.3.6.1.4.1.52.1.2.2.4.3.1.1 | INTEGER {linkSignalInactive(1), linkSignalActive(2)} | read-only | mandatory |
| stationPortLinkStateTime OBJECT-TYPE The amount of in seconds which have elapsed since the station port last changed state. Note: setting this to zero will clear the time. | 1.3.6.1.4.1.52.1.2.2.4.3.1.2 | INTEGER | read-write | mandatory |
| ringP OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.4.3.2 | |||
| ringPortLinkStatus OBJECT-TYPE Reports the link state of a ring port. | 1.3.6.1.4.1.52.1.2.2.4.3.2.1 | INTEGER {off(1), on(2)} | read-only | obsolete |
| ringPortLinkStateTime OBJECT-TYPE Reports the time (in seconds) since the ring port's link state changed. | 1.3.6.1.4.1.52.1.2.2.4.3.2.2 | INTEGER | read-write | obsolete |
| ringPort2 OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.4.3.3 | |||
| commonRP OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.4.3.3.1 | |||
| commonRPcapabilities OBJECT-TYPE This object returns a code indicating that the queried ring port is nonautowrap, autowrap or selectable. | 1.3.6.1.4.1.52.1.2.2.4.3.3.1.1 | INTEGER {nonAutowrap(1), autowrap(2), selectable(3)} | read-only | mandatory |
| autowrapRP OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.4.3.3.2 | |||
| autowrapRPFaultStatus OBJECT-TYPE This object reports the wire fault of an autowrappable ring port. | 1.3.6.1.4.1.52.1.2.2.4.3.3.2.1 | INTEGER {faultUndetectable(1), noFaultDetected(2), faultDetected(3)} | read-only | mandatory |
| autowrapRPFaultStateTime OBJECT-TYPE This object reports the amount of time in time ticks since the ring port fault state last changed. Writing zero to this object resets the time. If a zero is read, it means either zero time ticks have passed or the ring port is nonautowrap. | 1.3.6.1.4.1.52.1.2.2.4.3.3.2.2 | INTEGER | read-write | mandatory |
| autowrapRPSelectedType OBJECT-TYPE This object indicates the media type of the indicated ring port on some boards. Some boards provide both STP and fiber optic ring ports. The unselectable value will return an error if set. A set of STP or FO for a non-selectable ring port will not do anything, i.e. the status of normal is returned. | 1.3.6.1.4.1.52.1.2.2.4.3.3.2.3 | INTEGER {unselectable(1), stp(2), fo(3)} | read-write | mandatory |
| autowrapRPPhantomCurrent OBJECT-TYPE This object tells the board to turn on phantom current for the ring port and look for wire faults. NoPhantomAvailable will return an error if set. A set of activatePhantom or deactivatePhantom for a non-autowrap ring port will not do anything, i.e. the status of normal is returned. | 1.3.6.1.4.1.52.1.2.2.4.3.3.2.4 | INTEGER {noPhantomAvailable(1), activatePhantom(2), deactivatePhantom(3)} | read-write | mandatory |
| fDDIP OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.4.4 | |||
| fNB OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.6.1.1 | |||
| connectedLeft OBJECT-TYPE The Connected Left board (board n + 1) has the following states: Detached == 1 (Management (only management) detached, read/write). Attached == 2 (Management/AutoMode attached, read/write). Faulted == 3 (Management/AutoMode tried to attach but failed READ ONLY). | 1.3.6.1.4.1.52.1.6.1.1.1 | INTEGER {detached(1), attached(2), faulted(3)} | read-write | mandatory |
| connectedRight OBJECT-TYPE The Connected Right board (board n - 1) has the following states: Detached == 1 (Management (only management) detached, read/write). Attached == 2 (Management/AutoMode attached, read/write ). Faulted == 3 (Management/AutoMode tried to attach but failed READ ONLY). | 1.3.6.1.4.1.52.1.6.1.1.2 | INTEGER {detached(1), attached(2), faulted(3)} | read-write | mandatory |
| boardBypassState OBJECT-TYPE This object indicates that the board is in the bypassed state when it is ON. Bypassed means the board is NOT attached to the FNB. | 1.3.6.1.4.1.52.1.6.1.1.3 | INTEGER {off(1), on(2)} | read-write | mandatory |