REPEATER-MIB-2
- Registered at
- 1.3.6.1.4.1.52.1.1.2.2.11.3.6.1.4.1.52.1.1.2.2.21.3.6.1.4.1.52.1.1.2.2.31.3.6.1.4.1.52.1.1.2.3.11.3.6.1.4.1.52.1.1.2.3.21.3.6.1.4.1.52.1.2.2.1.11.3.6.1.4.1.52.1.2.2.1.21.3.6.1.4.1.52.1.2.2.51.3.6.1.4.1.52.1.5.1
- Namespace
- enterasys
- Source file
REPEATER-MIB-2- Digest
sha256:a87f5bbc047360dcb90e6d377601b47d403b62da4344ca16c1c48c45f8a1facd
Imports
| From | Symbols |
|---|---|
| IRM-OIDS | commonRev1, product, repeaterRev1, repeaterRev2, subSysMMAC, sysChassis, sysRepeaters |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CTRON-OIDS IRM-OIDS REPEATER-MIB-2 SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| deviceType OBJECT-TYPE This object defines the board type for the Management board in the device. (eg. IRBM, IRM). See appendix A for values. | 1.3.6.1.4.1.52.1.1.1.1 | INTEGER | read-only | mandatory |
| deviceName OBJECT-TYPE An ASCII name of the device that this agent manages. | 1.3.6.1.4.1.52.1.1.1.2 | OCTET STRING | read-write | mandatory |
| deviceIPAddress OBJECT-TYPE The Internet address of this device. Write access is granted only if SuperUser access is used. | 1.3.6.1.4.1.52.1.1.1.3 | IpAddress | read-write | mandatory |
| currentTime OBJECT-TYPE The current time of day as measured by the device in HHMMSS format. | 1.3.6.1.4.1.52.1.1.1.4 | OCTET STRING (SIZE(7)) | read-write | optional |
| currentDate OBJECT-TYPE The current date as measured by the device in MMDDYYYY format. | 1.3.6.1.4.1.52.1.1.1.5 | OCTET STRING (SIZE(8)) | read-write | optional |
| mACAddress OBJECT-TYPE The MAC (Ethernet) address of the MMAC. This can also be obtained from address translation MIB. | 1.3.6.1.4.1.52.1.1.1.6 | OCTET STRING | read-only | mandatory |
| soidIRMSNMP OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.1.2.2.1 | |||
| soidIRBM OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.1.2.2.2 | |||
| soidIRM2 OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.1.2.2.3 | |||
| soidMINIMMAC OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.1.2.3.1 | |||
| soidMRXI OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.1.2.3.2 | |||
| device OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.1 | |||
| deviceMMACType OBJECT-TYPE Indicates the type of MMAC. | 1.3.6.1.4.1.52.1.2.1.1.2 | INTEGER {mMAC3(1), mMAC5(2), minimmac(3), mrxi1(4), mrxi2(5), mMACm8Shunt(6), mMACm3Shunt(7), mMACm5Shunt(8), mMAC8FNBShunt(9), mMAC3FNBShunt(10), mMAC5FNBShunt(11), mMACm8FNB(12)} | read-only | mandatory |
| deviceSlots OBJECT-TYPE Number of available slots in this device including the IRM slot. | 1.3.6.1.4.1.52.1.2.1.1.3 | INTEGER {mMAC3(3), mMAC5(5), mMAC8(8)} | read-only | mandatory |
| deviceOccupiedSlots OBJECT-TYPE The slots that contain MIM boards. This field is bit encoded (eg. If a bit is set then that board is present. For example, a value of 3 indicates that there are boards in the IRM slot and the first MIM slot. | 1.3.6.1.4.1.52.1.2.1.1.4 | INTEGER | read-only | mandatory |
| devicePortsOn OBJECT-TYPE A read will return the number of adminstratively ON ports for the device. A write of a 1 will administratively enable all the ports on the device, except for redundant ports. | 1.3.6.1.4.1.52.1.2.1.1.5 | INTEGER | read-write | mandatory |
| deviceTotalPorts OBJECT-TYPE The total number of ports in the MMAC. | 1.3.6.1.4.1.52.1.2.1.1.6 | INTEGER | read-only | mandatory |
| deviceTotalPkts OBJECT-TYPE The number of packets detected on all ports of this device. | 1.3.6.1.4.1.52.1.2.1.1.7 | Counter | read-only | mandatory |
| deviceTotalErrors OBJECT-TYPE The sum of all alignment, CRC, out-of-window collisions, runt, and giant errors detected by this device. | 1.3.6.1.4.1.52.1.2.1.1.8 | Counter | read-only | optional |
| deviceTransmitColls OBJECT-TYPE The number of transmit collisions detected by this device. | 1.3.6.1.4.1.52.1.2.1.1.9 | Counter | read-only | optional |
| deviceRecColls OBJECT-TYPE The number of receive collsions detected by this device. | 1.3.6.1.4.1.52.1.2.1.1.10 | Counter | read-only | optional |
| deviceAligns OBJECT-TYPE The number of packets with alignment errors detected by this device. | 1.3.6.1.4.1.52.1.2.1.1.11 | Counter | read-only | optional |
| deviceCRCs OBJECT-TYPE The number of packets with bad CRC detected by this device. | 1.3.6.1.4.1.52.1.2.1.1.12 | Counter | read-only | optional |
| deviceRunts OBJECT-TYPE The number of runt frames detected by this device. | 1.3.6.1.4.1.52.1.2.1.1.13 | Counter | read-only | optional |
| deviceOOWColls OBJECT-TYPE The number of out-of-window collisions detected by this device. | 1.3.6.1.4.1.52.1.2.1.1.14 | Counter | read-only | optional |
| deviceNoResources OBJECT-TYPE The number of no resource condtions detected by this device. | 1.3.6.1.4.1.52.1.2.1.1.15 | Counter | read-only | optional |
| deviceRecBytes OBJECT-TYPE The number of bytes detected on the network by this device. | 1.3.6.1.4.1.52.1.2.1.1.16 | Counter | read-only | optional |
| deviceGiantFrames OBJECT-TYPE The number of longer than 1518 byte packets detected by this device. | 1.3.6.1.4.1.52.1.2.1.1.17 | Counter | read-only | optional |
| deviceRestart OBJECT-TYPE A read will return 0. A set of 0 will restart the device. | 1.3.6.1.4.1.52.1.2.1.1.18 | INTEGER | read-write | mandatory |
| deviceResetCounters OBJECT-TYPE A read will return 0. A set of 0 will reset all the counters for the device, boards and ports. | 1.3.6.1.4.1.52.1.2.1.1.19 | INTEGER | read-write | mandatory |
| deviceRedundantCts OBJECT-TYPE The number of redundant circuits available for use. | 1.3.6.1.4.1.52.1.2.1.1.20 | INTEGER | read-only | optional |
| deviceTimeBase OBJECT-TYPE The number of seconds used as the interval for performing all of the rate alarm checks. The minimum is 10 secs. There isn't a maximum. | 1.3.6.1.4.1.52.1.2.1.1.24 | INTEGER | read-write | optional |
| deviceResetRedundancy OBJECT-TYPE A read will return 0. A set of a 1 will reset redundancy for the entire box. | 1.3.6.1.4.1.52.1.2.1.1.25 | INTEGER | read-write | optional |
| deviceSrcAddrAgingTime OBJECT-TYPE The number of minutes that a source address is not detected before it is removed from the source address table. The minimum is 1 minute and the maximum is 1440 minutes (max minutes in a day). | 1.3.6.1.4.1.52.1.2.1.1.26 | INTEGER | read-write | optional |
| deviceSrcAddrTraps OBJECT-TYPE Controls sending of source address related traps. | 1.3.6.1.4.1.52.1.2.1.1.27 | INTEGER {trapsoff(1), trapson(2)} | read-write | optional |
| deviceSrcAddrLocked OBJECT-TYPE A set of 2 will disable all ports that support link status but do not have link active, or is segmented. The first source address seen on each of the remaining enabled ports, that have the type of station, will be the only address allowed through that port. If any other address is seen the port will be disabled. | 1.3.6.1.4.1.52.1.2.1.1.28 | INTEGER {lockoff(1), lockon(2)} | read-write | optional |
| deviceEnetBoardMap OBJECT-TYPE The slots that contain Ethernet MIM boards. This field is bit encoded (e.g. If a bit is set then that board is present and is an Ethernet MIM.) For example, a value of 3 indicates that there are boards in the IRM slot and the first MIM slot and that these boards are Ethernet MIMs. | 1.3.6.1.4.1.52.1.2.1.1.29 | INTEGER | read-only | mandatory |
| deviceTokenRingBoardMap OBJECT-TYPE The slots that contain Token Ring MIM boards. This field is bit encoded (e.g. If a bit is set then that board is present and is a Token Ring MIM.) For example, a value of 2 indicates that there is a board in the first slot and it is a Token Ring board. | 1.3.6.1.4.1.52.1.2.1.1.30 | INTEGER | read-only | mandatory |
| deviceFDDIBoardMap OBJECT-TYPE The slots that contain FDDI MIM boards. This field is bit encoded (e.g. If a bit is set then that board is present and is a FDDI MIM.) For example, a value of 2 indicates that there is a board in the first slot and it is a FDDI board. | 1.3.6.1.4.1.52.1.2.1.1.31 | INTEGER | read-only | mandatory |
| deviceRestoreDefaults OBJECT-TYPE A get will return 0. A set of 0 will restore all of battery backed RAM to factory defaults, with the execption of the IP address, the community table and the modem baud rate. | 1.3.6.1.4.1.52.1.2.1.1.32 | INTEGER | read-write | optional |
| deviceActiveUsers OBJECT-TYPE The number of active users seen on this device. | 1.3.6.1.4.1.52.1.2.1.1.33 | INTEGER | read-only | optional |
| deviceBroadPkts OBJECT-TYPE The sum of all of the broadcast packets detected on all ports of this device. | 1.3.6.1.4.1.52.1.2.1.1.48 | Counter | read-only | optional |
| deviceMultPkts OBJECT-TYPE The sum of all of the multicast packets detected on all ports of this device. | 1.3.6.1.4.1.52.1.2.1.1.49 | Counter | read-only | optional |
| deviceThdPartyOccupiedSlots OBJECT-TYPE The slots that contain Third Party MIM boards. This field is bit encoded (eg. if a bit is set then that board is present and is a Third Party MIM.) For example, a value of 4 indicates that there is a board in the third MIM slot (slot 4) and that this board is a Third Party MIM. | 1.3.6.1.4.1.52.1.2.1.1.51 | INTEGER | read-only | optional |
| deviceImimOccupiedSlots OBJECT-TYPE The slots that contain IMIM boards. This field is bit encoded (eg. if a bit is set then that board is present and is an IMIM). For example, a value of 4 indicates that there is a board in the third MIM slot (slot 4) and that this board is an IMIM. | 1.3.6.1.4.1.52.1.2.1.1.52 | INTEGER | read-only | optional |
| deviceLinkTraps OBJECT-TYPE Controls sending of link related traps. | 1.3.6.1.4.1.52.1.2.1.1.54 | INTEGER {trapsoff(1), trapson(2)} | read-write | optional |
| deviceSegTraps OBJECT-TYPE Controls sending of seg related traps. | 1.3.6.1.4.1.52.1.2.1.1.55 | INTEGER {trapsoff(1), trapson(2)} | read-write | optional |
| ctIPDefaultFrameType OBJECT-TYPE Defines the default frame type that will be used by the device. A device will understand both frame types and will respond based upon the framing type that is learned for the given address. This object defines the type of framing that will be used if no framing is known, for example ARP requests. Setting a value of 8022snap(2) will result in framing 802.3 - 802.2 - IP packets being generated by default. Setting a value of ethernet(1) will result in framing ethernet IP packets by default. | 1.3.6.1.4.1.52.1.2.1.1.56 | INTEGER {ethernet(1), snap8022(2)} | read-write | mandatory |
| board OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.2 | |||
| port OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.3 | |||
| sourceAddr OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.7 | |||
| sourceAddrBoard OBJECT-TYPE The board number of the port that the supplied source address has been seen on. | 1.3.6.1.4.1.52.1.2.1.7.1 | INTEGER | read-only | mandatory |
| sourceAddrPort OBJECT-TYPE The port number of the port that the supplied source address has been seen on. | 1.3.6.1.4.1.52.1.2.1.7.2 | INTEGER | read-only | mandatory |
| redundancy OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.8 | |||
| redundancyPollInterval OBJECT-TYPE The number of seconds between polls for redundancy. The minimum is 0 and the maximum is 99. | 1.3.6.1.4.1.52.1.2.1.8.1 | INTEGER | read-write | mandatory |
| redundancyTestTod OBJECT-TYPE The time of day at which the redundant circuits should be tested. | 1.3.6.1.4.1.52.1.2.1.8.2 | OCTET STRING | read-write | mandatory |
| redundancyPerformTest OBJECT-TYPE A read will return a 0. A set of a 1 will test the redundant circuits now. | 1.3.6.1.4.1.52.1.2.1.8.3 | INTEGER {performTest(1)} | read-write | mandatory |
| redundancyCircuitName OBJECT-TYPE The name of the indicated circuit. | 1.3.6.1.4.1.52.1.2.1.8.4 | OCTET STRING | read-write | mandatory |
| redundancyRetryCount OBJECT-TYPE The number of unanswered polls allowed for the indicated circuit before the current connection is declared bad. The minimum is 0 the maximum is 16. | 1.3.6.1.4.1.52.1.2.1.8.5 | INTEGER | read-write | mandatory |
| redundancyNumBPs OBJECT-TYPE The number of board/port combinations associated with the indicated circuit. | 1.3.6.1.4.1.52.1.2.1.8.6 | INTEGER | read-only | mandatory |
| redundancyCircuitBoards OBJECT-TYPE The boards associated with the indicated circuit, accessed by index. Note: The instance identifier for this object is the circuit number followed by an index. The index has no other meaning than to be used as an index for the purposes of the GET NEXT operation. | 1.3.6.1.4.1.52.1.2.1.8.7 | INTEGER | read-only | mandatory |
| redundancyCircuitPort OBJECT-TYPE The ports associated with the indicated circuit, accessed by index. Note: The instance identifier for this object is the circuit number followed by an index. The index has no other meaning than to be used as an index for the purposes of the GET NEXT operation. | 1.3.6.1.4.1.52.1.2.1.8.8 | INTEGER | read-only | mandatory |
| redundancyCircuitTypes OBJECT-TYPE The type of each port associated with the indicated circuit, accessed by index. Note: The instance identifier for this object is the circuit number followed by an index. The index has no other meaning than to be used as an index for the purposes of the GET NEXT operation. | 1.3.6.1.4.1.52.1.2.1.8.9 | INTEGER | read-only | mandatory |
| redundancyCircuitNumAddr OBJECT-TYPE The number of addresses associated with the indicated circuit. | 1.3.6.1.4.1.52.1.2.1.8.10 | INTEGER | read-only | mandatory |
| redundancyCircuitMACAddrAdd OBJECT-TYPE A get will return a null string. A set adds an ethernet address to the polling list for the indicated circuit. | 1.3.6.1.4.1.52.1.2.1.8.11 | OCTET STRING | read-write | mandatory |
| redundancyCircuitMACAddrDel OBJECT-TYPE A get will return a null string. A set deletes an ethernet address from the polling list for the indicated circuit. | 1.3.6.1.4.1.52.1.2.1.8.12 | OCTET STRING | read-write | mandatory |
| redundancyCircuitMACAddrDisp OBJECT-TYPE The ethernet addresses associated with the indicated circuit, accessed by index. Note: The instance identifier for this object is the circuit number followed by an index. The index has no other meaning than to be used as an index for the purposes of the GET NEXT operation. | 1.3.6.1.4.1.52.1.2.1.8.13 | OCTET STRING | read-only | mandatory |
| redundancyCircuitEnable OBJECT-TYPE Enables and disables the indicated circuit. | 1.3.6.1.4.1.52.1.2.1.8.14 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| redundancyCircuitReset OBJECT-TYPE A get will return 0. A set of 1 will reset the indicated circuit, return all of the associated board and ports to NOT-USED, remove associated addresses from the polling list, reset the circuit name and retry count to default values. | 1.3.6.1.4.1.52.1.2.1.8.15 | INTEGER {reset(1)} | read-write | mandatory |
| alarm OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9 | |||
| devAlrm OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.1 | |||
| devTraffic OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.1.1 | |||
| devTrafficEnable OBJECT-TYPE Enable or disable the checking for device level traffic thresholds getting exceeded. | 1.3.6.1.4.1.52.1.2.1.9.1.1.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| devTrafficThreshold OBJECT-TYPE The number of packets detected by the device within the device timebase that will cause a device traffic alarm trap to be sent. The minimum is 0. There isn't a maximum. | 1.3.6.1.4.1.52.1.2.1.9.1.1.2 | INTEGER | read-write | mandatory |
| devColls OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.1.2 | |||
| devCollsEnable OBJECT-TYPE Enable or disable the checking for device level collision thresholds getting exceeded. | 1.3.6.1.4.1.52.1.2.1.9.1.2.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| devCollsThreshold OBJECT-TYPE The number of collisions per good packet detected by the device within the device timebase that will cause a device collision alarm trap to be sent. The minimum is 1, the maximum is 15. | 1.3.6.1.4.1.52.1.2.1.9.1.2.2 | INTEGER | read-write | mandatory |
| devError OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.1.3 | |||
| devErrorEnable OBJECT-TYPE Enable or disable the checking for device level error thresholds getting exceeded. | 1.3.6.1.4.1.52.1.2.1.9.1.3.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| devErrorThreshold OBJECT-TYPE The percentage of errors per good packet detected by the device within the device timebase that will cause a device error alarm trap to be sent. The minimum is 1, the maximum is 100. | 1.3.6.1.4.1.52.1.2.1.9.1.3.2 | INTEGER | read-write | mandatory |
| devErrorSource OBJECT-TYPE The type of errors used for the device error alarm. The INTEGER is a bit encoded version of which errors to include in the error sum. The bits are encoded as follows: CRC_errors - Bit 0 - Least Significant Bit runts - Bit 1 OOW_colls - Bit 2 align_errs - Bit 3 No_resource - Bit 4 Giants - Bit 5 | 1.3.6.1.4.1.52.1.2.1.9.1.3.3 | INTEGER | read-write | mandatory |
| devBroad OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.1.4 | |||
| devBroadEnable OBJECT-TYPE Enable the sending of device level broadcast traps. | 1.3.6.1.4.1.52.1.2.1.9.1.4.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| devBroadThreshold OBJECT-TYPE The threshold of broadcast packets within the Devicetimebase that will cause a broadcast alarm. | 1.3.6.1.4.1.52.1.2.1.9.1.4.2 | INTEGER | read-write | mandatory |
| bdAlrm OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.2 | |||
| bdTraffic OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.2.1 | |||
| bdTrafficEnable OBJECT-TYPE Enable or disable the checking for board level traffic thresholds getting exceeded. | 1.3.6.1.4.1.52.1.2.1.9.2.1.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| bdTrafficThreshold OBJECT-TYPE The number of packets detected by the specified board within the device timebase that will cause a board traffic alarm trap to be sent. The minimum is 0. There isn't a maximum. | 1.3.6.1.4.1.52.1.2.1.9.2.1.2 | INTEGER | read-write | mandatory |
| bdTrafficBdDisable OBJECT-TYPE Permits a board to be disabled on a traffic threshold getting exceeded. | 1.3.6.1.4.1.52.1.2.1.9.2.1.3 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| bdColls OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.2.2 | |||
| bdCollsEnable OBJECT-TYPE Enable or disable the checking for board level collision thresholds getting exceeded. | 1.3.6.1.4.1.52.1.2.1.9.2.2.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| bdCollsThreshold OBJECT-TYPE The number of collisions per good packet detected by the specified board within the device timebase that will cause a board collision alarm trap to be sent. The minimum is 1, the maximum is 15. | 1.3.6.1.4.1.52.1.2.1.9.2.2.2 | INTEGER | read-write | mandatory |
| bdCollsBdDisable OBJECT-TYPE Permits a board to be disabled on a collision threshold getting exceeded. | 1.3.6.1.4.1.52.1.2.1.9.2.2.3 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| bdError OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.2.3 | |||
| bdErrorEnable OBJECT-TYPE Enable or disable the checking for board level error thresholds getting exceeded. | 1.3.6.1.4.1.52.1.2.1.9.2.3.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| bdErrorThreshold OBJECT-TYPE The percentage of errors per good packet detected by the specified board within the device timebase that will cause a board error alarm trap to be sent. The minimum is 1, the maximum is 100. | 1.3.6.1.4.1.52.1.2.1.9.2.3.2 | INTEGER | read-write | mandatory |
| bdErrorSource OBJECT-TYPE The type of errors used for the board error alarm. The INTEGER is a bit encoded version of which errors to include in the error sum. The bits are encoded as follows: CRC_errors - Bit 0 - Least Significant Bit runts - Bit 1 OOW_colls - Bit 2 align_errs - Bit 3 No_resource - Bit 4 Giants - Bit 5 | 1.3.6.1.4.1.52.1.2.1.9.2.3.3 | INTEGER | read-write | mandatory |
| bdErrorBdDisable OBJECT-TYPE Permits a board to be disabled on an error threshold getting exceeded. | 1.3.6.1.4.1.52.1.2.1.9.2.3.4 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| bdBroad OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.2.4 | |||
| bdBroadEnable OBJECT-TYPE Enable the sending of board level broadcast traps for this board. | 1.3.6.1.4.1.52.1.2.1.9.2.4.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| bdBroadThreshold OBJECT-TYPE The threshold of broadcast packets within the Devicetimebase that will cause a broadcast alarm. | 1.3.6.1.4.1.52.1.2.1.9.2.4.2 | INTEGER | read-write | mandatory |
| bdBroadDisable OBJECT-TYPE Permit a board to be disabled on a broadcast threshold alarm. | 1.3.6.1.4.1.52.1.2.1.9.2.4.3 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| portAlrm OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.3 | |||
| portTraffic OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.3.1 | |||
| portTrafficEnable OBJECT-TYPE Enable or disable the checking for port level traffic thresholds getting exceeded. | 1.3.6.1.4.1.52.1.2.1.9.3.1.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| portTrafficThreshold OBJECT-TYPE The number of packets detected by the specified port within the device timebase that will cause a port traffic alarm trap to be sent. The minimum is 0. There isn't a maximum. | 1.3.6.1.4.1.52.1.2.1.9.3.1.2 | INTEGER | read-write | mandatory |
| portTrafficPortDisable OBJECT-TYPE Permits a port to be disabled on a traffic threshold getting exceeded. | 1.3.6.1.4.1.52.1.2.1.9.3.1.3 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| portColls OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.3.2 | |||
| portCollsEnable OBJECT-TYPE Enable or disable the checking for port level collision thresholds getting exceeded. | 1.3.6.1.4.1.52.1.2.1.9.3.2.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| portCollsThreshold OBJECT-TYPE The number of collisions per good packet detected by the specified port within the device timebase that will cause a port collision alarm trap to be sent. The minimum is 1, the maximum is 15. | 1.3.6.1.4.1.52.1.2.1.9.3.2.2 | INTEGER | read-write | mandatory |
| portCollsPortDisable OBJECT-TYPE Permits a port to be disabled on a collision threshold getting exceeded. | 1.3.6.1.4.1.52.1.2.1.9.3.2.3 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| portError OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.3.3 | |||
| portErrorEnable OBJECT-TYPE Enable or disable the checking for port level error thresholds getting exceeded. | 1.3.6.1.4.1.52.1.2.1.9.3.3.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| portErrorThreshold OBJECT-TYPE The percentage of errors per good packet detected by the specified port within the device timebase that will cause a port error alarm trap to be sent. The minimum is 1, the maximum is 100. | 1.3.6.1.4.1.52.1.2.1.9.3.3.2 | INTEGER | read-write | mandatory |
| portErrorSource OBJECT-TYPE The type of errors used for the port error alarm. The INTEGER is a bit encoded version of which errors to include in the error sum. The bits are encoded as follows: CRC_errors - Bit 0 - Least Significant Bit runts - Bit 1 OOW_colls - Bit 2 align_errs - Bit 3 No_resource - Bit 4 Giants - Bit 5 | 1.3.6.1.4.1.52.1.2.1.9.3.3.3 | INTEGER | read-write | mandatory |
| portErrorPortDisable OBJECT-TYPE Permits a port to be disabled on an error threshold getting exceeded. | 1.3.6.1.4.1.52.1.2.1.9.3.3.4 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| portBroad OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.1.9.3.4 | |||
| portBroadEnable OBJECT-TYPE Enable the sending of port level broadcast alarms. | 1.3.6.1.4.1.52.1.2.1.9.3.4.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| portBroadThreshold OBJECT-TYPE The threshold of broadcast packets within the Devicetimebase that will cause a broadcast alarm. | 1.3.6.1.4.1.52.1.2.1.9.3.4.2 | Counter | read-write | mandatory |
| portBroadDisable OBJECT-TYPE Permit a port to be disabled on a broadcast threshold alarm. | 1.3.6.1.4.1.52.1.2.1.9.3.4.3 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| rr2device OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.1 | |||
| commonD OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.1.1 | |||
| ethernetD OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.1.2 | |||
| tokenRingD OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.1.3 | |||
| deviceTRTokenRingPortsOn OBJECT-TYPE The number of Token Ring Ports (i.e. station, Ring In and Ring Out ports) administratively ON for this device. | 1.3.6.1.4.1.52.1.2.2.1.3.1 | INTEGER | read-only | deprecated |
| deviceTRTotalTokenRingPorts OBJECT-TYPE The total number of Token Ring Ports (i.e. station, Ring In and Ring Out ports) on this device. | 1.3.6.1.4.1.52.1.2.2.1.3.2 | INTEGER | read-only | deprecated |
| deviceTRTotalTokenRingRingPortsOn OBJECT-TYPE The total number of Ring In and Ring Out ports (active) administratively ON for this device. | 1.3.6.1.4.1.52.1.2.2.1.3.3 | INTEGER | read-only | deprecated |
| deviceTRTotalTokenRingRingPorts OBJECT-TYPE The total number of Ring In and Ring Out ports on this device. | 1.3.6.1.4.1.52.1.2.2.1.3.4 | INTEGER | read-only | deprecated |
| deviceTRTotalTokenRingRings OBJECT-TYPE The total number of (Token Ring) rings formed on this device. | 1.3.6.1.4.1.52.1.2.2.1.3.5 | INTEGER | read-only | deprecated |
| deviceTRTotalTokenRingBoards OBJECT-TYPE The total number of Token Ring MIMs in the MMAC. | 1.3.6.1.4.1.52.1.2.2.1.3.6 | INTEGER | read-only | deprecated |
| deviceTRTokenRingBoardMap OBJECT-TYPE The slots that contain Token Ring MIM boards. This field is bit encoded (e.g. If a bit is set then that board is present and is a Token Ring MIM.) For example, a value of 2 indicates that there is a board in the first slot and it is a Token Ring board. | 1.3.6.1.4.1.52.1.2.2.1.3.7 | INTEGER | read-only | deprecated |
| network OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.2 | |||
| rr2board OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.3 | |||
| commonB OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.3.1 | |||
| boardIndex OBJECT-TYPE The slot number of this board. | 1.3.6.1.4.1.52.1.2.2.3.1.1 | INTEGER | read-only | mandatory |
| boardName OBJECT-TYPE The name of the board. This field will only contain printable ASCII characters. | 1.3.6.1.4.1.52.1.2.2.3.1.2 | OCTET STRING | read-write | mandatory |
| boardType OBJECT-TYPE The type of the MIM. (eg. FOT, TPT, etc). See appendix A for encoding. | 1.3.6.1.4.1.52.1.2.2.3.1.3 | INTEGER | read-only | mandatory |
| boardTotalPorts OBJECT-TYPE Total number of ports supported on this board. | 1.3.6.1.4.1.52.1.2.2.3.1.4 | INTEGER | read-only | mandatory |
| boardPortsOn OBJECT-TYPE A read will return the number of adminstratively ON ports for the board. A write of a 2 will administratively enable all the ports on the board, except for redundant ports. | 1.3.6.1.4.1.52.1.2.2.3.1.6 | INTEGER | read-write | mandatory |
| boardActiveUsers OBJECT-TYPE The number of active users seen on this board. | 1.3.6.1.4.1.52.1.2.2.3.1.8 | INTEGER | read-only | mandatory |
| ethernetB OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.3.2 | |||
| boardTotalPkts OBJECT-TYPE The number of packets detected on all ports of this port. | 1.3.6.1.4.1.52.1.2.2.3.2.1 | Counter | read-only | mandatory |
| boardTotalErrors OBJECT-TYPE The sum of all alignment, CRC, out-of-window collisions, runt, and giant errors detected by this board. | 1.3.6.1.4.1.52.1.2.2.3.2.2 | Counter | read-only | mandatory |
| boardTransColls OBJECT-TYPE The number of transmit collisions detected by this board. | 1.3.6.1.4.1.52.1.2.2.3.2.3 | Counter | read-only | mandatory |
| boardRecColls OBJECT-TYPE The number of receive collsions detected by this board. | 1.3.6.1.4.1.52.1.2.2.3.2.4 | Counter | read-only | mandatory |
| boardAligns OBJECT-TYPE The number of packets with alignment errors detected by this board. | 1.3.6.1.4.1.52.1.2.2.3.2.5 | Counter | read-only | mandatory |
| boardCRCs OBJECT-TYPE The number of packets with bad CRC detected by this board. | 1.3.6.1.4.1.52.1.2.2.3.2.6 | Counter | read-only | mandatory |
| boardRunts OBJECT-TYPE The number of runt frames detected by this board. | 1.3.6.1.4.1.52.1.2.2.3.2.7 | Counter | read-only | mandatory |
| boardOOWColls OBJECT-TYPE The number of out-of-window collisions detected by this board. | 1.3.6.1.4.1.52.1.2.2.3.2.8 | Counter | read-only | mandatory |
| boardNoResources OBJECT-TYPE The number of no resource condtions detected by this board. | 1.3.6.1.4.1.52.1.2.2.3.2.9 | Counter | read-only | mandatory |
| boardRecBytes OBJECT-TYPE The number of bytes detected on the network by this board. | 1.3.6.1.4.1.52.1.2.2.3.2.10 | Counter | read-only | mandatory |
| boardGiants OBJECT-TYPE The number of longer than 1518 byte packets detected by this board. | 1.3.6.1.4.1.52.1.2.2.3.2.11 | Counter | read-only | mandatory |
| boardBroadPkts OBJECT-TYPE The number broadcast packets detected by this board. | 1.3.6.1.4.1.52.1.2.2.3.2.26 | Counter | read-only | mandatory |
| boardMultPkts OBJECT-TYPE The number multicast packets detected by this board. | 1.3.6.1.4.1.52.1.2.2.3.2.27 | Counter | read-only | mandatory |
| tokenRingB OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.3.3 | |||
| boardTotalRingPorts OBJECT-TYPE The total number of ring ports on this board. Currently, zero or two. | 1.3.6.1.4.1.52.1.2.2.3.3.1 | INTEGER | read-only | deprecated |
| boardTotalStationPorts OBJECT-TYPE The total number of station ports on this board. | 1.3.6.1.4.1.52.1.2.2.3.3.2 | INTEGER | read-only | deprecated |
| boardModeStatus OBJECT-TYPE The board mode. | 1.3.6.1.4.1.52.1.2.2.3.3.3 | INTEGER {management(1), auto(2)} | read-write | deprecated |
| boardTotalRingPortsOn OBJECT-TYPE The number of administartively ON ring ports on this board. | 1.3.6.1.4.1.52.1.2.2.3.3.4 | INTEGER | read-only | deprecated |
| boardTotalStationPortsOn OBJECT-TYPE The number of administartively ON station ports on this board. | 1.3.6.1.4.1.52.1.2.2.3.3.5 | INTEGER | read-only | deprecated |
| boardSpeed OBJECT-TYPE The board speed. | 1.3.6.1.4.1.52.1.2.2.3.3.6 | INTEGER {fourMhz(4), sixteenMhz(16)} | read-write | deprecated |
| boardRingSpeedFault OBJECT-TYPE Data speed of station mismatches configuration speed of board. Board is automatically bypassed. | 1.3.6.1.4.1.52.1.2.2.3.3.7 | INTEGER {noFaultDetected(1), faultDetected(2)} | read-only | deprecated |
| boardFirstRingPort OBJECT-TYPE The port number of the first ring port. | 1.3.6.1.4.1.52.1.2.2.3.3.9 | INTEGER | read-only | deprecated |
| fddiB OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.3.4 | |||
| rr2port OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.4 | |||
| commonP OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.4.1 | |||
| portIndex OBJECT-TYPE The number of this port relative to the board it is on. | 1.3.6.1.4.1.52.1.2.2.4.1.1 | INTEGER | read-only | mandatory |
| portMediaType OBJECT-TYPE The type of the port. (eg. FOT, TPT, etc). See appendix A for values. | 1.3.6.1.4.1.52.1.2.2.4.1.2 | INTEGER | read-only | mandatory |
| portAdminState OBJECT-TYPE The administrative status of this port. | 1.3.6.1.4.1.52.1.2.2.4.1.3 | INTEGER {off(1), on(2)} | read-write | mandatory |
| portSourceAddr OBJECT-TYPE A source address that has been seen on this port. | 1.3.6.1.4.1.52.1.2.2.4.1.4 | OCTET STRING | read-only | optional |
| portActiveUsers OBJECT-TYPE The number of active users seen on this port. | 1.3.6.1.4.1.52.1.2.2.4.1.6 | INTEGER | read-only | optional |
| ethernetP OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.4.2 | |||
| portTopologyType OBJECT-TYPE The topological type of the port. Station referring to a port that has seen 1 or 0 addresses. Trunk referring to a port that has seen more than 1 address. | 1.3.6.1.4.1.52.1.2.2.4.2.1 | INTEGER {station(1), trunk(2)} | read-only | mandatory |
| portLinkStatus OBJECT-TYPE The state of the link signal for this port | 1.3.6.1.4.1.52.1.2.2.4.2.2 | INTEGER {linkSignalInactive(1), linkSignalActive(2), linkSignalNotSupported(3)} | read-only | mandatory |
| portStatus OBJECT-TYPE The hardware status of the port. | 1.3.6.1.4.1.52.1.2.2.4.2.3 | INTEGER {active(1), segmented(2)} | read-only | mandatory |
| portTotalPkts OBJECT-TYPE The number of packets detected by this port. | 1.3.6.1.4.1.52.1.2.2.4.2.4 | Counter | read-only | mandatory |
| portTotalErrors OBJECT-TYPE The sum of all alignment, CRC, out-of-window collisions, runt, and giant errors detected by this port. | 1.3.6.1.4.1.52.1.2.2.4.2.5 | Counter | read-only | mandatory |
| portTransmitColls OBJECT-TYPE The number of transmit collisions detected by this port. | 1.3.6.1.4.1.52.1.2.2.4.2.6 | Counter | read-only | mandatory |
| portRecColls OBJECT-TYPE The number of receive collsions detected by this port. | 1.3.6.1.4.1.52.1.2.2.4.2.7 | Counter | read-only | mandatory |
| portAligns OBJECT-TYPE The number of packets with alignment errors detected by this port. | 1.3.6.1.4.1.52.1.2.2.4.2.8 | Counter | read-only | mandatory |
| portCRCs OBJECT-TYPE The number of packets with bad CRC detected by this port. | 1.3.6.1.4.1.52.1.2.2.4.2.9 | Counter | read-only | mandatory |
| portRunts OBJECT-TYPE The number of runt frames detected by this port. | 1.3.6.1.4.1.52.1.2.2.4.2.10 | Counter | read-only | mandatory |
| portOOWColls OBJECT-TYPE The number of out-of-window collisions detected by this port. | 1.3.6.1.4.1.52.1.2.2.4.2.11 | Counter | read-only | mandatory |
| portNoResources OBJECT-TYPE The number of no resource condtions detected by this port. | 1.3.6.1.4.1.52.1.2.2.4.2.12 | Counter | read-only | mandatory |
| portRecBytes OBJECT-TYPE The number of bytes detected on the network by this port. | 1.3.6.1.4.1.52.1.2.2.4.2.13 | Counter | read-only | mandatory |
| portGiantFrames OBJECT-TYPE The number of longer than 1518 byte packets detected by this port. | 1.3.6.1.4.1.52.1.2.2.4.2.14 | Counter | read-only | mandatory |
| portRedundCrt OBJECT-TYPE The redundant circuit with which this port is associated. | 1.3.6.1.4.1.52.1.2.2.4.2.15 | INTEGER | read-write | mandatory |
| portRedundType OBJECT-TYPE The type of port this port is in the redundant circuit. | 1.3.6.1.4.1.52.1.2.2.4.2.16 | INTEGER {notUsed(1), primary(3), backup(4)} | read-write | mandatory |
| portRedundStatus OBJECT-TYPE The current state of this port in the redundant circuit. | 1.3.6.1.4.1.52.1.2.2.4.2.17 | INTEGER {notUsed(1), active(2), inactive(3)} | read-write | mandatory |
| portForceTrunkType OBJECT-TYPE This variable forces a port to be a trunk port. | 1.3.6.1.4.1.52.1.2.2.4.2.18 | INTEGER {notForced(1), forced(2)} | read-write | mandatory |
| portBroadPkts OBJECT-TYPE The sum of broadcast packets detected on this port. | 1.3.6.1.4.1.52.1.2.2.4.2.33 | Counter | read-only | mandatory |
| portMultPkts OBJECT-TYPE The sum of multicast packets detected on this port. | 1.3.6.1.4.1.52.1.2.2.4.2.34 | Counter | read-only | mandatory |
| tokenRingP OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.4.3 | |||
| stationP OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.4.3.1 | |||
| stationPortLinkStatus OBJECT-TYPE When station is supplying phantom current the Link Signal is active. When there is no phantom current the Link Signal is inactive. | 1.3.6.1.4.1.52.1.2.2.4.3.1.1 | INTEGER {linkSignalInactive(1), linkSignalActive(2)} | read-only | deprecated |
| stationPortLinkStateTime OBJECT-TYPE The amount of time (in seconds) elapsed since the station port last changed state. A write of 0 will reset the elapsed time. | 1.3.6.1.4.1.52.1.2.2.4.3.1.2 | INTEGER | read-write | deprecated |
| ringP OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.4.3.2 | |||
| fddiP OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.4.4 | |||
| repeaterTables OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.2.2.5 | |||
| productRev1 OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.5.1 | |||
| target OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.5.1.1 | |||
| targetRevision OBJECT-TYPE The revision of the target board. | 1.3.6.1.4.1.52.1.5.1.1.1 | INTEGER | read-only | mandatory |
| targetPortAssociation OBJECT-TYPE Controls how the front panel ports are associated with the bridge or the repeater. The valid values are: Value AUI Port Fiber Port 0 Bridge Redundant 1 Redundant Bridge 2 Bridge Repeater 3 Repeater Bridge 4 Redundant Repeater 5 Repeater Redundant Note: only values 0 and 1 are valid for rev 2 boards and before. Note: only values 4 and 5 are valid for the IRM2. | 1.3.6.1.4.1.52.1.5.1.1.2 | INTEGER | read-write | mandatory |
| fnb OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.6.1.1 | |||
| fnbConnectedLeft OBJECT-TYPE The Connected Left board (board n + 1) has the following states: Detached == 1 (Management (only management) detached, read/write). Attached == 2 (Management/AutoMode attached, read/write). Faulted == 3 (Management/AutoMode tried to attach but failed read ONLY). | 1.3.6.1.4.1.52.1.6.1.1.1 | INTEGER | read-write | mandatory |
| fnbConnectedRight OBJECT-TYPE The Connected Right board (board n - 1) has the following states: Detached == 1 (Management (only management) detached, read/write). Attached == 2 (Management/AutoMode attached, read/write). Faulted == 3 (Management/AutoMode tried to attach but failed read ONLY). | 1.3.6.1.4.1.52.1.6.1.1.2 | INTEGER | read-write | mandatory |
| fnbBoardBypassState OBJECT-TYPE Off == 1 (NOT bypassed). On == 2 (bypassed). | 1.3.6.1.4.1.52.1.6.1.1.3 | INTEGER | read-write | mandatory |
| audibleAlarm OBJECT-IDENTITY | 1.3.6.1.4.1.52.1.6.1.2 | |||
| audibleAlarmEnable OBJECT-TYPE Allows/disallows the audible alarm to be sounded when a situation occurs that the alarm should be sounded. | 1.3.6.1.4.1.52.1.6.1.2.1 | INTEGER {disable(1), enable(2)} | read-write | mandatory |
| audibleAlarmOff OBJECT-TYPE Turn off a sounding alarm. A read will tell you if the alarm is on or not. A write will stop a sounding alarm. | 1.3.6.1.4.1.52.1.6.1.2.2 | INTEGER {off(1), on(2)} | read-write | mandatory |