IPAD-ROUTER-MIB
- Registered at
- 1.3.6.1.4.1.321.100.1.13
- Last updated
- 1900-10-25 00:00
- Organization
- Verilink Corporation
- Namespace
- zhone
- Source file
IPAD-ROUTER-MIB- Digest
sha256:feab0fd1124c462b6fc331e6f9c684cd33d1ebe10fd21a4eb2074add5c1d5c59
Description
The IPAD Router MIB modified for SNMPv2.
Contact
Bob Ray bray@verilink.com 1-256-774-2380
Imports
| From | Symbols |
|---|---|
| IPADv2-MIB | ipad |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
DS8200v2-MIB DS8200v2-TC-MIB IPAD-ROUTER-MIB IPADv2-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ipadCircuitParms OBJECT-IDENTITY | 1.3.6.1.4.1.321.100.1.13.1 | |||
| ipadCircuitTable OBJECT-TYPE Table of Circuit parameters. | 1.3.6.1.4.1.321.100.1.13.1.1 | not-accessible | current | |
| ipadCircuitTableEntry OBJECT-TYPE An entry in the ipad Circuit parameter table. | 1.3.6.1.4.1.321.100.1.13.1.1.1 | not-accessible | current | |
| ipadCircuitIndex OBJECT-TYPE The index into the Circuit table. | 1.3.6.1.4.1.321.100.1.13.1.1.1.1 | INTEGER | read-only | current |
| ipadCircuitEndpoint OBJECT-TYPE An entry in the endpoint table. | 1.3.6.1.4.1.321.100.1.13.1.1.1.2 | DisplayString | read-write | current |
| ipadCircuitIpAddress OBJECT-TYPE The IP Address of the Circuit. | 1.3.6.1.4.1.321.100.1.13.1.1.1.3 | IpAddress | read-write | current |
| ipadCircuitIpMask OBJECT-TYPE The IP Mask of this Circuit IP address. | 1.3.6.1.4.1.321.100.1.13.1.1.1.4 | IpAddress | read-write | current |
| ipadCircuitMaxTransmitUnit OBJECT-TYPE The Maximum packet size carried by this Circuit. | 1.3.6.1.4.1.321.100.1.13.1.1.1.5 | INTEGER (0..65535) | read-write | current |
| ipadCircuitCost OBJECT-TYPE The cost (delay) of this Circuit. | 1.3.6.1.4.1.321.100.1.13.1.1.1.6 | INTEGER (0..65535) | read-write | current |
| ipadCircuitEnableRIP OBJECT-TYPE To enable or disable RIP for this Circuit. | 1.3.6.1.4.1.321.100.1.13.1.1.1.7 | INTEGER {other(1), disabled(2), enabled(3), talkOnly(4), listenOnly(5)} | read-write | current |
| ipadCircuitEnableOSPF OBJECT-TYPE To enable or disable OSPF for this Circuit. | 1.3.6.1.4.1.321.100.1.13.1.1.1.8 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | current |
| ipadCircuitEnableMulticast OBJECT-TYPE To allow multicast adressing for this Circuit. | 1.3.6.1.4.1.321.100.1.13.1.1.1.9 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | current |
| ipadCircuitOSPFArea OBJECT-TYPE OSPF Circuit Area ID. | 1.3.6.1.4.1.321.100.1.13.1.1.1.10 | INTEGER (1..3600) | read-write | current |
| ipadCircuitOSPFLSATimer OBJECT-TYPE Number of seconds between LSA. | 1.3.6.1.4.1.321.100.1.13.1.1.1.11 | INTEGER (1..3600) | read-write | current |
| ipadCircuitOSPFLSUDelay OBJECT-TYPE Transit delay for LSU packets. | 1.3.6.1.4.1.321.100.1.13.1.1.1.12 | INTEGER (1..3600) | read-write | current |
| ipadCircuitOSPFRouterPriority OBJECT-TYPE OSPF Circuit Router Priority. | 1.3.6.1.4.1.321.100.1.13.1.1.1.13 | INTEGER (1..255) | read-write | current |
| ipadCircuitOSPFHelloInterval OBJECT-TYPE OSPF Circuit Hello Interval. | 1.3.6.1.4.1.321.100.1.13.1.1.1.14 | INTEGER (0..65535) | read-write | current |
| ipadCircuitOSPFDeadInterval OBJECT-TYPE OSPF Circuit Dead Interval. | 1.3.6.1.4.1.321.100.1.13.1.1.1.15 | INTEGER (0..65535) | read-write | current |
| ipadCircuitOSPFAuthKey OBJECT-TYPE OSPF Circuit Authentication Key. | 1.3.6.1.4.1.321.100.1.13.1.1.1.16 | DisplayString | read-write | current |
| ipadCircuitAdd OBJECT-TYPE Writing addnew(2) to this field causes a new (blank) route to be appended to the Circuit Table. | 1.3.6.1.4.1.321.100.1.13.1.2 | INTEGER {other(1), addnew(2)} | read-write | current |
| ipadCircuitDelete OBJECT-TYPE Writing the index of an entry in the Circuit table causes that entry to be deleted. | 1.3.6.1.4.1.321.100.1.13.1.3 | INTEGER | read-write | current |
| ipadRIPParms OBJECT-IDENTITY | 1.3.6.1.4.1.321.100.1.13.2 | |||
| ipadRIPEnable OBJECT-TYPE Determines if RIP routing is enabled. | 1.3.6.1.4.1.321.100.1.13.2.1 | INTEGER {other(1), disabled(2), enabledRIP1(3), enabledRIP2(4)} | read-write | current |
| ipadRIPTrustNeighbors OBJECT-TYPE Determines if RIP Neighbors should be trusted. | 1.3.6.1.4.1.321.100.1.13.2.2 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | current |
| ipadRIPInterval OBJECT-TYPE Specifies the RIP interval in seconds. | 1.3.6.1.4.1.321.100.1.13.2.3 | INTEGER (0..65535) | read-write | current |
| ipadRIPDomain OBJECT-TYPE Specifies the RIP Domain. | 1.3.6.1.4.1.321.100.1.13.2.4 | INTEGER (0..65535) | read-write | current |
| ipadRIPStaticARPTable OBJECT-TYPE Table of RIP Static ARP parameters. | 1.3.6.1.4.1.321.100.1.13.2.5 | not-accessible | current | |
| ipadRIPStaticARPTableEntry OBJECT-TYPE An entry in the ipad RIP Static ARP parameter table. | 1.3.6.1.4.1.321.100.1.13.2.5.1 | not-accessible | current | |
| ipadRIPStaticARPIndex OBJECT-TYPE The index into the RIP Static ARP table. | 1.3.6.1.4.1.321.100.1.13.2.5.1.1 | INTEGER | read-only | current |
| ipadRIPStaticARPEndpoint OBJECT-TYPE An entry in the endpoint table. | 1.3.6.1.4.1.321.100.1.13.2.5.1.2 | DisplayString | read-write | current |
| ipadRIPStaticARPIpAddress OBJECT-TYPE This is the IP address of the device we will associate the MAC or DLCI address. | 1.3.6.1.4.1.321.100.1.13.2.5.1.3 | IpAddress | read-write | current |
| ipadRIPStaticARPMacAddress OBJECT-TYPE MAC address of the device. | 1.3.6.1.4.1.321.100.1.13.2.5.1.4 | DisplayString | read-write | current |
| ipadRIPStaticARPDLCIAddress OBJECT-TYPE DLCI address of the device. | 1.3.6.1.4.1.321.100.1.13.2.5.1.5 | INTEGER | read-write | current |
| ipadRIPStaticARPEnableARP OBJECT-TYPE Enable that Static ARP Entry. | 1.3.6.1.4.1.321.100.1.13.2.5.1.6 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | current |
| ipadRIPStaticARPAdd OBJECT-TYPE Writing addnew(2) to this field causes a new (blank) route to be appended to the Static ARP Table. | 1.3.6.1.4.1.321.100.1.13.2.6 | INTEGER {other(1), addnew(2)} | read-write | current |
| ipadRIPStaticARPDelete OBJECT-TYPE Writing the index of an entry in the Static ARP table causes that entry to be deleted. | 1.3.6.1.4.1.321.100.1.13.2.7 | INTEGER | read-write | current |
| ipadRIPStaticRouteTable OBJECT-TYPE Table of RIP Static Route parameters. | 1.3.6.1.4.1.321.100.1.13.2.8 | not-accessible | current | |
| ipadRIPStaticRouteTableEntry OBJECT-TYPE An entry in the ipad RIP Static Route parameter table. | 1.3.6.1.4.1.321.100.1.13.2.8.1 | not-accessible | current | |
| ipadRIPStaticRouteIndex OBJECT-TYPE The index into the RIP Static Route table. | 1.3.6.1.4.1.321.100.1.13.2.8.1.1 | INTEGER | read-only | current |
| ipadRIPStaticRouteEndpoint OBJECT-TYPE An entry in the endpoint table. | 1.3.6.1.4.1.321.100.1.13.2.8.1.2 | DisplayString | read-write | current |
| ipadRIPStaticRouteTargetIpAddress OBJECT-TYPE | 1.3.6.1.4.1.321.100.1.13.2.8.1.3 | IpAddress | read-write | current |
| ipadRIPStaticRouteTargetIpMask OBJECT-TYPE IP Mask of the IP address. | 1.3.6.1.4.1.321.100.1.13.2.8.1.4 | IpAddress | read-write | current |
| ipadRIPStaticRouteNextHopIpAddress OBJECT-TYPE Next Hop IP address to reach the remote Network. | 1.3.6.1.4.1.321.100.1.13.2.8.1.5 | IpAddress | read-write | current |
| ipadRIPStaticRouteCost OBJECT-TYPE Cost to reach that remote Network. | 1.3.6.1.4.1.321.100.1.13.2.8.1.6 | INTEGER (0..65535) | read-write | current |
| ipadRIPStaticRouteEnableRouter OBJECT-TYPE Enable or Not this static route. | 1.3.6.1.4.1.321.100.1.13.2.8.1.7 | INTEGER {other(1), disable(2), enable(3), enableAndAdvertize(4)} | read-write | current |
| ipadRIPStaticRouteAdd OBJECT-TYPE Writing addnew(2) to this field causes a new (blank) route to be appended to the Static Route Table. | 1.3.6.1.4.1.321.100.1.13.2.9 | INTEGER {other(1), addnew(2)} | read-write | current |
| ipadRIPStaticRouteDelete OBJECT-TYPE Writing the index of an entry in the Static Route table causes that entry to be deleted. | 1.3.6.1.4.1.321.100.1.13.2.10 | INTEGER | read-write | current |
| ipadRIPNeighborTable OBJECT-TYPE Table of RIP trusted neighbors. | 1.3.6.1.4.1.321.100.1.13.2.11 | not-accessible | current | |
| ipadRIPNeighborTableEntry OBJECT-TYPE An entry in the ipad RIP trusted neighbor table. | 1.3.6.1.4.1.321.100.1.13.2.11.1 | not-accessible | current | |
| ipadRIPNeighborIndex OBJECT-TYPE The index into the ipadRIPNeighborTable. | 1.3.6.1.4.1.321.100.1.13.2.11.1.1 | INTEGER | read-only | current |
| ipadRIPNeighborAddress OBJECT-TYPE A RIP trusted neighbor. | 1.3.6.1.4.1.321.100.1.13.2.11.1.2 | IpAddress | read-only | current |
| ipadRIPNeighborAdd OBJECT-TYPE Writing an IP address to this object adds the IP address to the ipad RIP Trusted Neighbor table. | 1.3.6.1.4.1.321.100.1.13.2.12 | IpAddress | read-write | current |
| ipadRIPNeighborDelete OBJECT-TYPE Writing an IP address to this object removes the IP address from the ipad RIP Trusted Neighbor table. | 1.3.6.1.4.1.321.100.1.13.2.13 | IpAddress | read-write | current |
| ipadOSPFParms OBJECT-IDENTITY | 1.3.6.1.4.1.321.100.1.13.3 | |||
| ipadOSPFEnable OBJECT-TYPE To enable or disable OSPF. | 1.3.6.1.4.1.321.100.1.13.3.1 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | current |
| ipadOSPFRouterID OBJECT-TYPE Router's ID. | 1.3.6.1.4.1.321.100.1.13.3.2 | IpAddress | read-write | current |
| ipadOSPFAreaTable OBJECT-TYPE Table of OSPF circuits. | 1.3.6.1.4.1.321.100.1.13.3.3 | not-accessible | current | |
| ipadOSPFAreaTableEntry OBJECT-TYPE An entry in the OSPF area table. | 1.3.6.1.4.1.321.100.1.13.3.3.1 | not-accessible | current | |
| ipadOSPFAreaIndex OBJECT-TYPE The index into the ipadOSPFAreaTable. | 1.3.6.1.4.1.321.100.1.13.3.3.1.1 | INTEGER | read-only | current |
| ipadOSPFAreaID OBJECT-TYPE Area ID. | 1.3.6.1.4.1.321.100.1.13.3.3.1.2 | IpAddress | read-write | current |
| ipadOSPFAreaEnable OBJECT-TYPE To enable or disable this Area. | 1.3.6.1.4.1.321.100.1.13.3.3.1.3 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | current |
| ipadOSPFAreaAuthType OBJECT-TYPE | 1.3.6.1.4.1.321.100.1.13.3.3.1.4 | INTEGER {none(1), simple(2)} | read-write | current |
| ipadOSPFAreaStub OBJECT-TYPE | 1.3.6.1.4.1.321.100.1.13.3.3.1.5 | INTEGER {other(1), no(2), yes(3)} | read-write | current |
| ipadOSPFAreaAddrSummary OBJECT-TYPE Address summary of Area. | 1.3.6.1.4.1.321.100.1.13.3.3.1.6 | IpAddress | read-write | current |
| ipadOSPFAreaMaskSummary OBJECT-TYPE Mask of the summary Area. | 1.3.6.1.4.1.321.100.1.13.3.3.1.7 | IpAddress | read-write | current |
| ipadOSPFAreaAdvertise OBJECT-TYPE To enable or disable this Area. | 1.3.6.1.4.1.321.100.1.13.3.3.1.8 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | current |
| ipadOSPFAreaAdd OBJECT-TYPE Writing addnew(2) to this field causes a new (blank) Area. | 1.3.6.1.4.1.321.100.1.13.3.4 | INTEGER {other(1), addnew(2)} | read-write | current |
| ipadOSPFAreaDelete OBJECT-TYPE Writing the index of an entry in the OSPF Area Table causes that entry to be deleted. | 1.3.6.1.4.1.321.100.1.13.3.5 | INTEGER | read-write | current |
| ipadOSPFVlinkTable OBJECT-TYPE Table of OSPF circuits. | 1.3.6.1.4.1.321.100.1.13.3.6 | not-accessible | current | |
| ipadOSPFVlinkTableEntry OBJECT-TYPE An entry in the OSPF circuit table. | 1.3.6.1.4.1.321.100.1.13.3.6.1 | not-accessible | current | |
| ipadOSPFVlinkIndex OBJECT-TYPE The index into the ipadOSPFVlinkTable. | 1.3.6.1.4.1.321.100.1.13.3.6.1.1 | INTEGER | read-only | current |
| ipadOSPFVlinkEnable OBJECT-TYPE Enable or disable the Virtual Link. | 1.3.6.1.4.1.321.100.1.13.3.6.1.2 | INTEGER {other(1), disabled(2), enabled(3)} | read-write | current |
| ipadOSPFVlinkTransitAreaID OBJECT-TYPE ID of the transit Area the virtual link will pass through. | 1.3.6.1.4.1.321.100.1.13.3.6.1.3 | IpAddress | read-write | current |
| ipadOSPFVlinkAreaBorderRouterID OBJECT-TYPE Route ID of the area border router at end of the virtual link. | 1.3.6.1.4.1.321.100.1.13.3.6.1.4 | IpAddress | read-write | current |
| ipadOSPFVlinkAdd OBJECT-TYPE Writing addnew(2) to this field causes a new (blank) Vlink. | 1.3.6.1.4.1.321.100.1.13.3.7 | INTEGER {other(1), addnew(2)} | read-write | current |
| ipadOSPFVlinkDelete OBJECT-TYPE Writing the index of an entry in the OSPF Vlink Table causes that entry to be deleted. | 1.3.6.1.4.1.321.100.1.13.3.8 | INTEGER | read-write | current |