MIBs Depot

IPAD-ATM-MIB

Registered at
1.3.6.1.4.1.321.100.1.25
Last updated
1900-03-27 00:01
Organization
Verilink Corporation
Namespace
zhone
Source file
IPAD-ATM-MIB
Digest
sha256:c89e14b88ad371aa7199fcefeb8c31e488c6ed4ff4b3e780f93a06312181b552

Description

The IPAD ATM MIB.

Contact

support@verilink.com 1-800-926-0085

Imports

FromSymbols
IPADv2-MIBipad
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIIpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

DS8200v2-MIB
DS8200v2-TC-MIB
IPAD-ATM-MIB
IPADv2-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
ipadAtmParms
OBJECT-IDENTITY
1.3.6.1.4.1.321.100.1.25.1
ipadAtmTable
OBJECT-TYPE
Table of ATM parameters.
1.3.6.1.4.1.321.100.1.25.1.1not-accessiblecurrent
ipadAtmTableEntry
OBJECT-TYPE
An entry in the ipad ATM parameter table.
1.3.6.1.4.1.321.100.1.25.1.1.1not-accessiblecurrent
ipadAtmIfIndex
OBJECT-TYPE
The index into the ATM table.
1.3.6.1.4.1.321.100.1.25.1.1.1.1INTEGERread-onlycurrent
ipadAtmOperStatus
OBJECT-TYPE
The up/down status of this atm interface.
1.3.6.1.4.1.321.100.1.25.1.1.1.2INTEGER {other(1), down(2), upNoCellSync(3), upCellSync(4)}read-onlycurrent
ipadAtmVccsOpenedOK
OBJECT-TYPE
The current number of successfully opened VCCs on this ATM interface.
1.3.6.1.4.1.321.100.1.25.1.1.1.3INTEGERread-onlycurrent
ipadAtmVccsNotOpened
OBJECT-TYPE
The current number of VCCs that were not successfully opened on this ATM interface.
1.3.6.1.4.1.321.100.1.25.1.1.1.4INTEGERread-onlycurrent
ipadAtmAlarmReset
OBJECT-TYPE
Reset the alarms or statistics of this ATM interface.
1.3.6.1.4.1.321.100.1.25.1.1.1.5INTEGER {other(1), clearAlarms(2), clearStats(3)}read-writecurrent
ipadAtmOverSubscriptionFactor
OBJECT-TYPE
The current over-subscription-factor for this ATM interface. Used for VBR and UBR VC connection admission control to allow the either VBR or UBR service category connections to collectively use more bandwidth than is available in order to make use of the statistical multiplexing of the connections. The PCR of each individual VC is limited to the interface's line rate. However when multiple VCs are configured, the sum of their PCR values can go up to (OverSubscriptionFactor * (line-rate) / 53*8). A value of 1 indicates no oversubscription allowed. A value of 5 indicates 5 times oversubscription allowed. Note that CBR connections cannot be oversubscribed. Also, if CES is in use on the interface, all AAL5 connections have their PCR limited to the amount which the line rate can support above the commitment for CES, and the oversubscription applies only to that bandwidth above the CES commitment.
1.3.6.1.4.1.321.100.1.25.1.1.1.6INTEGER (1..10)read-writecurrent
ipadAtmLineBandwidth
OBJECT-TYPE
The current ATM Line interface Bandwidth in cells per second.
1.3.6.1.4.1.321.100.1.25.1.1.1.7INTEGERread-onlycurrent
ipadAtmAAL5Bandwidth
OBJECT-TYPE
The current AAL5 Bandwidth in cells per second.
1.3.6.1.4.1.321.100.1.25.1.1.1.8INTEGERread-onlycurrent
ipadAtmOverSubBandwidth
OBJECT-TYPE
The AAL5 Oversubscription Bandwidth in cells per second. This value is ipadAtmAAL5Bandwidth multiplied by the ipadAtmOversubscriptionFactor.
1.3.6.1.4.1.321.100.1.25.1.1.1.9INTEGERread-onlycurrent
ipadAtmCbrUsedBandwidth
OBJECT-TYPE
The amount of AAL5 Bandwidth allocated to CBR VCs in cells per second.
1.3.6.1.4.1.321.100.1.25.1.1.1.10INTEGERread-onlycurrent
ipadAtmVbrUsedBandwidth
OBJECT-TYPE
The amount of AAL5 Bandwidth allocated to VBR VCs in cells per second. When OversubscriptionFactor is greater than 1, this value can exceed ipadAtmAAL5Bandwidth.
1.3.6.1.4.1.321.100.1.25.1.1.1.11INTEGERread-onlycurrent
ipadAtmUbrUsedBandwidth
OBJECT-TYPE
The amount of AAL5 Bandwidth allocated to UBR VCs in cells per second. When OversubscriptionFactor is greater than 1, this value can exceed ipadAtmAAL5Bandwidth.
1.3.6.1.4.1.321.100.1.25.1.1.1.12INTEGERread-onlycurrent
ipadAtmQos0Pcr
OBJECT-TYPE
The value of PCR to be used for each VC which has no specified QOS profile (0). The VC is configured as UBR with the given Peak Cell Rate.
1.3.6.1.4.1.321.100.1.25.1.1.1.13INTEGERread-onlycurrent
ipadAtmStatsParms
OBJECT-IDENTITY
1.3.6.1.4.1.321.100.1.25.2
ipadAtmStatsTable
OBJECT-TYPE
Table of ATM statistics.
1.3.6.1.4.1.321.100.1.25.2.1not-accessiblecurrent
ipadAtmStatsTableEntry
OBJECT-TYPE
An entry in the ipad ATM Stats parameter table.
1.3.6.1.4.1.321.100.1.25.2.1.1not-accessiblecurrent
ipadAtmStatsIndex
OBJECT-TYPE
The index representing the ATM interface.
1.3.6.1.4.1.321.100.1.25.2.1.1.1INTEGERread-onlycurrent
ipadAtmStatsPeriodIndex
OBJECT-TYPE
The index representing the period for the ATM stats entry.
1.3.6.1.4.1.321.100.1.25.2.1.1.2INTEGERread-onlycurrent
ipadAtmStatsTimeStamp
OBJECT-TYPE
The value of sysUpTime the last time the statistics were updated.
1.3.6.1.4.1.321.100.1.25.2.1.1.3TimeTicksread-onlycurrent
ipadAtmStatsRxFramesOK
OBJECT-TYPE
The number of error-free frames received during the period.
1.3.6.1.4.1.321.100.1.25.2.1.1.4INTEGERread-onlycurrent
ipadAtmStatsTxFramesOK
OBJECT-TYPE
The number of frames successfully transmitted during the period.
1.3.6.1.4.1.321.100.1.25.2.1.1.5INTEGERread-onlycurrent
ipadAtmStatsRxFramesError
OBJECT-TYPE
The number of errored frames received during the period.
1.3.6.1.4.1.321.100.1.25.2.1.1.6INTEGERread-onlycurrent
ipadAtmStatsTxFramesError
OBJECT-TYPE
The number of transmitted frames that were errored.
1.3.6.1.4.1.321.100.1.25.2.1.1.7INTEGERread-onlycurrent
ipadAtmStatsRxBytesOK
OBJECT-TYPE
The number of error-free bytes received during the period.
1.3.6.1.4.1.321.100.1.25.2.1.1.8INTEGERread-onlycurrent
ipadAtmStatsTxBytesOK
OBJECT-TYPE
The number of successfully transmitted bytes during the period.
1.3.6.1.4.1.321.100.1.25.2.1.1.9INTEGERread-onlycurrent
ipadAtmStatsLostSync
OBJECT-TYPE
The number of times sync has been lost or recovered.
1.3.6.1.4.1.321.100.1.25.2.1.1.10INTEGERread-onlycurrent
ipadAtmStatsOamCellsRx
OBJECT-TYPE
The number of OAM cells received on this ATM link.
1.3.6.1.4.1.321.100.1.25.2.1.1.11INTEGERread-onlycurrent
ipadAtmStatsOamCellsTx
OBJECT-TYPE
The number of OAM cells transmitted on this ATM link.
1.3.6.1.4.1.321.100.1.25.2.1.1.12INTEGERread-onlycurrent
ipadAtmVccParms
OBJECT-IDENTITY
1.3.6.1.4.1.321.100.1.25.3
ipadAtmVccTable
OBJECT-TYPE
Table of Virtual Channel parameters.
1.3.6.1.4.1.321.100.1.25.3.1not-accessiblecurrent
ipadAtmVccTableEntry
OBJECT-TYPE
An entry in the ipad ATM Vcc parameter table.
1.3.6.1.4.1.321.100.1.25.3.1.1not-accessiblecurrent
ipadAtmVccIndex
OBJECT-TYPE
The index into the ATM VCC table, corresponding to ifIndex.
1.3.6.1.4.1.321.100.1.25.3.1.1.1INTEGERread-onlycurrent
ipadAtmVccVpiIndex
OBJECT-TYPE
The VPI for the VCC.
1.3.6.1.4.1.321.100.1.25.3.1.1.2INTEGERread-onlycurrent
ipadAtmVccVciIndex
OBJECT-TYPE
The VCI for the VCC.
1.3.6.1.4.1.321.100.1.25.3.1.1.3INTEGERread-onlycurrent
ipadAtmVccEncapsulationType
OBJECT-TYPE
The encapsulation method used on this VCC. vcMux indicates null encapsulation and may be used for IP routing or PPP applications. llcMux indicates LLC encapsulation and may be used for IP routing, bridging, and PPP applications. serialPPPoA and serialHDLCoA indicate serial port applications.
1.3.6.1.4.1.321.100.1.25.3.1.1.4INTEGER {other(1), serialPPPoA(2), vcMux(3), llcMux(4), serialHDLCoA(5), frf5(6), frf8(7)}read-writecurrent
ipadAtmVccTrafficType
OBJECT-TYPE
The traffic type of this VCC.
1.3.6.1.4.1.321.100.1.25.3.1.1.5INTEGER {other(1), cbr(2), rtVbr(3), nrtVbr(4), abr(5), ubr(6)}read-onlycurrent
ipadAtmVccChannelRate
OBJECT-TYPE
The channel rate for this VCC.
1.3.6.1.4.1.321.100.1.25.3.1.1.6INTEGERread-onlycurrent
ipadAtmVccAlarmReset
OBJECT-TYPE
Reset the alarms or statistics of this VCC.
1.3.6.1.4.1.321.100.1.25.3.1.1.7INTEGER {other(1), clearAlarms(2), clearStats(3)}read-writecurrent
ipadAtmVccSLATimer
OBJECT-TYPE
The time in seconds between SLA measurement packets being sent.
1.3.6.1.4.1.321.100.1.25.3.1.1.8INTEGERread-writecurrent
ipadAtmVccRemoteFramesOffered
OBJECT-TYPE
The number of frames offered by the remote device.
1.3.6.1.4.1.321.100.1.25.3.1.1.9INTEGERread-onlycurrent
ipadAtmVccFramesReceived
OBJECT-TYPE
The number of frames received by this device.
1.3.6.1.4.1.321.100.1.25.3.1.1.10INTEGERread-onlycurrent
ipadAtmVccRemoteDataOffered
OBJECT-TYPE
The number of data bytes offered by the remote device.
1.3.6.1.4.1.321.100.1.25.3.1.1.11INTEGERread-onlycurrent
ipadAtmVccDataReceived
OBJECT-TYPE
The number of data bytes received by this device.
1.3.6.1.4.1.321.100.1.25.3.1.1.12INTEGERread-onlycurrent
ipadAtmVccRemoteActive
OBJECT-TYPE
The current state of the remote device as detected by the local device.
1.3.6.1.4.1.321.100.1.25.3.1.1.13INTEGER {other(1), inactive(2), active(3)}read-onlycurrent
ipadAtmVccRemoteVpi
OBJECT-TYPE
The remote VPI.
1.3.6.1.4.1.321.100.1.25.3.1.1.14INTEGERread-onlycurrent
ipadAtmVccRemoteVci
OBJECT-TYPE
The remote VCI.
1.3.6.1.4.1.321.100.1.25.3.1.1.15INTEGERread-onlycurrent
ipadAtmVccRemoteIPAddress
OBJECT-TYPE
The IP Address of the device connected to the remote end of this VCC.
1.3.6.1.4.1.321.100.1.25.3.1.1.16IpAddressread-onlycurrent
ipadAtmVccRemoteUnitId
OBJECT-TYPE
The Unit ID assigned to the devie connected to the remote end of this VCC.
1.3.6.1.4.1.321.100.1.25.3.1.1.17DisplayStringread-onlycurrent
ipadAtmVccEtoeLoopbackCommand
OBJECT-TYPE
A command to issue on the VCC Loopback. The start command is used to start an OAM F5 VCC loopback. The stop command is used to terminate the OAM loopback. The statistics variables associated with the OAM loopback are automatically cleared when a loopback is started.
1.3.6.1.4.1.321.100.1.25.3.1.1.18INTEGER {other(1), start(2), stop(3)}read-writecurrent
ipadAtmVccEtoeLoopbackState
OBJECT-TYPE
The state of this VCC loopback function. The active state means OAM F5 loopback cells are being sent from this endpoint once every 5 seconds. The loopback state means that OAM F5 loopback cells are being received and returned from this endpoint.
1.3.6.1.4.1.321.100.1.25.3.1.1.19INTEGER {inactive(1), active(2), loopback(3)}read-onlycurrent
ipadAtmVccEtoeLoopbackCellsTx
OBJECT-TYPE
The number of OAM F5 Loopback cells transmitted for this VCC.
1.3.6.1.4.1.321.100.1.25.3.1.1.20INTEGERread-onlycurrent
ipadAtmVccEtoeLoopbackCellsRx
OBJECT-TYPE
The number of OAM F5 Loopback cells received for this VCC.
1.3.6.1.4.1.321.100.1.25.3.1.1.21INTEGERread-onlycurrent
ipadAtmVccEtoeLoopbackRttMin
OBJECT-TYPE
The minimum round trip time in milliseconds between sending a loopback cell and receiving the returned loopback cell.
1.3.6.1.4.1.321.100.1.25.3.1.1.22INTEGERread-onlycurrent
ipadAtmVccEtoeLoopbackRttMax
OBJECT-TYPE
The maximum round trip time in milliseconds between sending a loopback cell and receiving the returned loopback cell.
1.3.6.1.4.1.321.100.1.25.3.1.1.23INTEGERread-onlycurrent
ipadAtmVccEtoeLoopbackRttAvg
OBJECT-TYPE
The average round trip time in milliseconds between sending a loopback cell and receiving the returned loopback cell.
1.3.6.1.4.1.321.100.1.25.3.1.1.24INTEGERread-onlycurrent
ipadAtmVccSegLoopbackCommand
OBJECT-TYPE
A command to issue on the VCC Loopback. The start command is used to start an OAM F5 VCC loopback. The stop command is used to terminate the OAM loopback. The statistics variables associated with the OAM loopback are automatically cleared when a loopback is started.
1.3.6.1.4.1.321.100.1.25.3.1.1.25INTEGER {other(1), start(2), stop(3)}read-writecurrent
ipadAtmVccSegLoopbackState
OBJECT-TYPE
The state of this VCC loopback function. The active state means OAM F5 loopback cells are being sent from this endpoint once every 5 seconds. The loopback state means that OAM F5 loopback cells are being received and returned from this endpoint.
1.3.6.1.4.1.321.100.1.25.3.1.1.26INTEGER {inactive(1), active(2), loopback(3)}read-onlycurrent
ipadAtmVccSegLoopbackCellsTx
OBJECT-TYPE
The number of OAM F5 Loopback cells transmitted for this VCC.
1.3.6.1.4.1.321.100.1.25.3.1.1.27INTEGERread-onlycurrent
ipadAtmVccSegLoopbackCellsRx
OBJECT-TYPE
The number of OAM F5 Loopback cells received for this VCC.
1.3.6.1.4.1.321.100.1.25.3.1.1.28INTEGERread-onlycurrent
ipadAtmVccSegLoopbackRttMin
OBJECT-TYPE
The minimum round trip time in milliseconds between sending a loopback cell and receiving the returned loopback cell.
1.3.6.1.4.1.321.100.1.25.3.1.1.29INTEGERread-onlycurrent
ipadAtmVccSegLoopbackRttMax
OBJECT-TYPE
The maximum round trip time in milliseconds between sending a loopback cell and receiving the returned loopback cell.
1.3.6.1.4.1.321.100.1.25.3.1.1.30INTEGERread-onlycurrent
ipadAtmVccSegLoopbackRttAvg
OBJECT-TYPE
The average round trip time in milliseconds between sending a loopback cell and receiving the returned loopback cell.
1.3.6.1.4.1.321.100.1.25.3.1.1.31INTEGERread-onlycurrent
ipadAtmVccEtoeContCheckCommand
OBJECT-TYPE
ipadAtmVccEtoeContCheckCommand is used to request activation or deactivation of the End-to-End continuity check on this VCC.
1.3.6.1.4.1.321.100.1.25.3.1.1.32INTEGER {other(1), activate(2), deactivate(3)}read-writecurrent
ipadAtmVccEtoeContCheckAutoActivate
OBJECT-TYPE
ipadAtmVccEtoeContCheckAutoActivate indicates whether End-to-End continuity check is automatically activated on this VCC. A Value of disable means CC is not automatically activated. A value of enable permits CC to be automatically activated after the VCC connection is established.
1.3.6.1.4.1.321.100.1.25.3.1.1.33INTEGER {other(1), disable(2), enable(3)}read-writecurrent
ipadAtmVccEtoeContCheckType
OBJECT-TYPE
Default Continuity Check Type used for this VCC. A value of none selects no continuity check. A value of sink, source, or sinkAndSource selects the respective continuity check functions. ipadAtmVccEtoeContCheckType can only be changed when CC is not currently active.
1.3.6.1.4.1.321.100.1.25.3.1.1.34INTEGER {none(1), sink(2), source(3), sinkAndSource(4)}read-onlycurrent
ipadAtmVccEtoeContCheckTypeInUse
OBJECT-TYPE
The current Continuity Check Type in use for this VCC. ipadAtmVccEtoeContCheckTypeInUse may differ from ipadAtmVccEtoeContCheckType if CC is activated via inband OAM.
1.3.6.1.4.1.321.100.1.25.3.1.1.35INTEGER {none(1), sink(2), source(3), sinkAndSource(4)}read-onlycurrent
ipadAtmVccEtoeContCheckStatus
OBJECT-TYPE
The current state of Continuity Check for this VCC. In the ready state, no CC is being performed. The ready state indicates CC is permitted to be activated. The activating state indicates CC has been requested and is being activated. During activation, an OAM activation cell is sent to the opposite endpoint to request CC. Once an activation confirmed cell is received, the state is then changed to active. Reception of an activation denied response or a multiple of 3 ten-second time outs waiting for a confirmation will result in an activationFailed state. CC sourcing is performed when state is active or activating. CC sinking is performed when state is active.
1.3.6.1.4.1.321.100.1.25.3.1.1.36INTEGER {ready(1), active(2), activationFailed(3), activating(4), deactivating(5)}read-onlycurrent
ipadAtmVccEtoeContCheckCellsTx
OBJECT-TYPE
The number of CC cells transmitted for this VCC for CC Sourcing function.
1.3.6.1.4.1.321.100.1.25.3.1.1.37INTEGERread-onlycurrent
ipadAtmVccEtoeContCheckCellsRx
OBJECT-TYPE
The number of CC cells received for this VCC for the CC Sinking function.
1.3.6.1.4.1.321.100.1.25.3.1.1.38INTEGERread-onlycurrent
ipadAtmVccEtoeAisStatus
OBJECT-TYPE
The current e-t-e_VC-AIS state.
1.3.6.1.4.1.321.100.1.25.3.1.1.39INTEGER {noAis(1), ais(2)}read-onlycurrent
ipadAtmVccEtoeRdiStatus
OBJECT-TYPE
The current e-t-e_VC-RDI state.
1.3.6.1.4.1.321.100.1.25.3.1.1.40INTEGER {noRdi(1), rdi(2)}read-onlycurrent
ipadAtmVccStatsParms
OBJECT-IDENTITY
1.3.6.1.4.1.321.100.1.25.4
ipadAtmVccStatsTable
OBJECT-TYPE
Table of ATM statistics.
1.3.6.1.4.1.321.100.1.25.4.1not-accessiblecurrent
ipadAtmVccStatsTableEntry
OBJECT-TYPE
An entry in the ipad ATM VccStats parameter table.
1.3.6.1.4.1.321.100.1.25.4.1.1not-accessiblecurrent
ipadAtmVccStatsIndex
OBJECT-TYPE
The index representing the ATM interface.
1.3.6.1.4.1.321.100.1.25.4.1.1.1INTEGERread-onlycurrent
ipadAtmVccStatsVpiIndex
OBJECT-TYPE
The index representing the VPI of the VCC.
1.3.6.1.4.1.321.100.1.25.4.1.1.2INTEGERread-onlycurrent
ipadAtmVccStatsVciIndex
OBJECT-TYPE
The index representing the VCI of the VCC.
1.3.6.1.4.1.321.100.1.25.4.1.1.3INTEGERread-onlycurrent
ipadAtmVccStatsPeriodIndex
OBJECT-TYPE
The index representing the period for the VCC stats entry.
1.3.6.1.4.1.321.100.1.25.4.1.1.4INTEGERread-onlycurrent
ipadAtmVccStatsTimeStamp
OBJECT-TYPE
The value of sysUpTime the last time the statistics were updated.
1.3.6.1.4.1.321.100.1.25.4.1.1.5TimeTicksread-onlycurrent
ipadAtmVccStatsRxFramesOK
OBJECT-TYPE
The number of error-free frames received this period.
1.3.6.1.4.1.321.100.1.25.4.1.1.6INTEGERread-onlycurrent
ipadAtmVccStatsTxFramesOK
OBJECT-TYPE
The number of frames successfully transmitted during this period.
1.3.6.1.4.1.321.100.1.25.4.1.1.7INTEGERread-onlycurrent
ipadAtmVccStatsRxFramesError
OBJECT-TYPE
The number of errored frames received this period.
1.3.6.1.4.1.321.100.1.25.4.1.1.8INTEGERread-onlycurrent
ipadAtmVccStatsTxFramesError
OBJECT-TYPE
The number of frames that were not successfully transmitted during this period.
1.3.6.1.4.1.321.100.1.25.4.1.1.9INTEGERread-onlycurrent
ipadAtmVccStatsRxFramesCLP
OBJECT-TYPE
The number of frames received with CLP set during the period.
1.3.6.1.4.1.321.100.1.25.4.1.1.10INTEGERread-onlycurrent
ipadAtmVccStatsRxFramesCI
OBJECT-TYPE
The number of frames received with congestion set during the period.
1.3.6.1.4.1.321.100.1.25.4.1.1.11INTEGERread-onlycurrent
ipadAtmVccStatsRxFramesAbort
OBJECT-TYPE
The number of frames whose reception was aborted during the period.
1.3.6.1.4.1.321.100.1.25.4.1.1.12INTEGERread-onlycurrent
ipadAtmVccStatsRxFramesLenViolation
OBJECT-TYPE
The number of frames received with a length violation during the period.
1.3.6.1.4.1.321.100.1.25.4.1.1.13INTEGERread-onlycurrent
ipadAtmVccStatsRxFramesCRCError
OBJECT-TYPE
The number of frames received with CRC errors during the period.
1.3.6.1.4.1.321.100.1.25.4.1.1.14INTEGERread-onlycurrent
ipadAtmVccStatsRxFramesTimeout
OBJECT-TYPE
The number of frames whose reception timed out during the period.
1.3.6.1.4.1.321.100.1.25.4.1.1.15INTEGERread-onlycurrent
ipadAtmVccStatsRxFramesHCSError
OBJECT-TYPE
The number of frames received with an HCS error in a cell.
1.3.6.1.4.1.321.100.1.25.4.1.1.16INTEGERread-onlycurrent
ipadAtmVccStatsRxFramesNoBuffer
OBJECT-TYPE
The number of frames discarded due to the lack of buffers.
1.3.6.1.4.1.321.100.1.25.4.1.1.17INTEGERread-onlycurrent
ipadAtmVccStatsRxCellsOK
OBJECT-TYPE
The number of cells successfully received.
1.3.6.1.4.1.321.100.1.25.4.1.1.18INTEGERread-onlycurrent
ipadAtmVccStatsTxCellsOK
OBJECT-TYPE
The number of cells successfully transmitted.
1.3.6.1.4.1.321.100.1.25.4.1.1.19INTEGERread-onlycurrent
ipadAtmVccStatsRxBytesOK
OBJECT-TYPE
The number of bytes successfully received.
1.3.6.1.4.1.321.100.1.25.4.1.1.20INTEGERread-onlycurrent
ipadAtmVccStatsTxBytesOK
OBJECT-TYPE
The number of bytes successfully transmitted.
1.3.6.1.4.1.321.100.1.25.4.1.1.21INTEGERread-onlycurrent
ipadAtmVccStatsDelayPeak
OBJECT-TYPE
The peak delay measured during this period.
1.3.6.1.4.1.321.100.1.25.4.1.1.22INTEGERread-onlycurrent
ipadAtmVccStatsDelayAverage
OBJECT-TYPE
The average delay measured during this period.
1.3.6.1.4.1.321.100.1.25.4.1.1.23INTEGERread-onlycurrent
ipadAtmVccStatsRoundTripTimeouts
OBJECT-TYPE
The number of round trip delay message timeouts measured.
1.3.6.1.4.1.321.100.1.25.4.1.1.24INTEGERread-onlycurrent
ipadAtmVccStatsRemoteFramesOffered
OBJECT-TYPE
The number of frames offered by the remote device.
1.3.6.1.4.1.321.100.1.25.4.1.1.25INTEGERread-onlycurrent
ipadAtmVccStatsFramesReceived
OBJECT-TYPE
The number of frames received by the local device.
1.3.6.1.4.1.321.100.1.25.4.1.1.26INTEGERread-onlycurrent
ipadAtmVccStatsFDR
OBJECT-TYPE
The calculated frame delivery ratio.
1.3.6.1.4.1.321.100.1.25.4.1.1.27DisplayStringread-onlycurrent
ipadAtmVccStatsRemoteDataOffered
OBJECT-TYPE
The number of data bytes offered by the remote device.
1.3.6.1.4.1.321.100.1.25.4.1.1.28INTEGERread-onlycurrent
ipadAtmVccStatsDataReceived
OBJECT-TYPE
The number of data bytes received by the local device.
1.3.6.1.4.1.321.100.1.25.4.1.1.29INTEGERread-onlycurrent
ipadAtmVccStatsDDR
OBJECT-TYPE
The calculated data delivery ratio.
1.3.6.1.4.1.321.100.1.25.4.1.1.30DisplayStringread-onlycurrent
ipadAtmVccStatsUAS
OBJECT-TYPE
The number of seconds which the remote device was unavailable.
1.3.6.1.4.1.321.100.1.25.4.1.1.31INTEGERread-onlycurrent
ipadAtmCesParms
OBJECT-IDENTITY
1.3.6.1.4.1.321.100.1.25.5
ipadAtmCesTable
OBJECT-TYPE
Table of CES parameters.
1.3.6.1.4.1.321.100.1.25.5.1not-accessiblecurrent
ipadAtmCesTableEntry
OBJECT-TYPE
An entry in the ipad ATM CES parameter table.
1.3.6.1.4.1.321.100.1.25.5.1.1not-accessiblecurrent
ipadAtmCesIndex
OBJECT-TYPE
The index into the ATM CES table.
1.3.6.1.4.1.321.100.1.25.5.1.1.1INTEGERread-onlycurrent
ipadAtmCesPayloadScrambling
OBJECT-TYPE
ipadAtmCesPayloadScrambling indicates whether CES payload scrambling is enabled.
1.3.6.1.4.1.321.100.1.25.5.1.1.2INTEGER {other(1), disable(2), enable(3)}read-writecurrent
ipadAtmCesAutoChannelConfiguration
OBJECT-TYPE
ipadAtmCesAutoChannelConfiguration indicates whether the CES channel configuration should be dynamic based on available line bandwidth.
1.3.6.1.4.1.321.100.1.25.5.1.1.3INTEGER {other(1), disable(2), enable(3)}read-writecurrent
ipadAtmFrParms
OBJECT-IDENTITY
1.3.6.1.4.1.321.100.1.25.6
ipadAtmFrf5SvcTable
OBJECT-TYPE
Table of ATM FRF5 profile parameters.
1.3.6.1.4.1.321.100.1.25.6.1not-accessiblecurrent
ipadAtmFrf5SvcTableEntry
OBJECT-TYPE
An entry in the ipad ATM FRF5 service table.
1.3.6.1.4.1.321.100.1.25.6.1.1not-accessiblecurrent
ipadAtmFrf5SvcIfIndex
OBJECT-TYPE
The index representing the ATM interface.
1.3.6.1.4.1.321.100.1.25.6.1.1.1INTEGERread-onlycurrent
ipadAtmFrf5SvcVpiIndex
OBJECT-TYPE
The index representing the VPI of the VCC.
1.3.6.1.4.1.321.100.1.25.6.1.1.2INTEGERread-onlycurrent
ipadAtmFrf5SvcVciIndex
OBJECT-TYPE
The index representing the VCI of the VCC.
1.3.6.1.4.1.321.100.1.25.6.1.1.3INTEGERread-onlycurrent
ipadAtmFrf5SvcDeToClpMappingMode
OBJECT-TYPE
Discard Eligibility to Cell Loss Priority mapping mode. mode1: The Discard Eligibility (DE) field in the Q.922 core frame shall be copied unchanged into the DE field in the FR-SSCS PDU header and mapped to the ATM Cell Loss Priority (CLP) of every ATM cell generated by the segmentation process of that frame. mode2Const0: The DE field in the Q.922 core frame shall be copied unchanged into the DE field in the FR-SSCS PDU header and the ATM Cell Loss Priority of every ATM cell generated by the segmentation process of that frame shall be set to the constant value 0. mode2Const1: The DE field in the Q.922 core frame shall be copied unchanged into the DE field in the FR-SSCS PDU header and the ATM Cell Loss Priority of every ATM cell generated by the segmentation process of that frame shall be set to the constant value 1.
1.3.6.1.4.1.321.100.1.25.6.1.1.4INTEGER {mode1(1), mode2Const0(2), mode2Const1(3)}read-writecurrent
ipadAtmFrf5SvcClpToDeMappingMode
OBJECT-TYPE
Cell Loss Priority to Discard Eligibility mapping mode. mode1: If one or more ATM cells belonging to a frame has its CLP field set to one or if the DE field of the FR-SSCS PDU is set to one, the IWF shall set the DE field of the Q.922 core frame. mode2: No mapping is performed from the ATM layer to Q.922 core layer. The FR-SSCS PDU DE field is copied unchanged to the Q.922 core frame DE field, independent of CLP indications(s) received at the ATM layer.
1.3.6.1.4.1.321.100.1.25.6.1.1.5INTEGER {mode1(1), mode2(2)}read-writecurrent
ipadAtmFrf5SvcN1
OBJECT-TYPE
Number of keep alive requests between full status requests.
1.3.6.1.4.1.321.100.1.25.6.1.1.6INTEGER (1..255)read-writecurrent
ipadAtmFrf5SvcN2
OBJECT-TYPE
Number of errors before alarm.
1.3.6.1.4.1.321.100.1.25.6.1.1.7INTEGER (1..10)read-writecurrent
ipadAtmFrf5SvcN3
OBJECT-TYPE
Number of events to sample N2.
1.3.6.1.4.1.321.100.1.25.6.1.1.8INTEGER (1..10)read-writecurrent
ipadAtmFrf5SvcT1
OBJECT-TYPE
Delay before issuing a poll sequence.
1.3.6.1.4.1.321.100.1.25.6.1.1.9INTEGER (5..240)read-writecurrent
ipadAtmFrf5SvcT2
OBJECT-TYPE
T2 timer
1.3.6.1.4.1.321.100.1.25.6.1.1.10INTEGER (5..245)read-writecurrent
ipadAtmFrf5SvcActive
OBJECT-TYPE
Specifies if the frf5 service is active.
1.3.6.1.4.1.321.100.1.25.6.1.1.11INTEGER {other(1), no(2), yes(3)}read-onlycurrent
ipadAtmFrf5SvcAddDLCI
OBJECT-TYPE
Identifies a DLCI number to be added.
1.3.6.1.4.1.321.100.1.25.6.1.1.12INTEGERread-writecurrent
ipadAtmFrf5SvcDeleteDLCI
OBJECT-TYPE
Identifies a DLCI number to be deleted.
1.3.6.1.4.1.321.100.1.25.6.1.1.13INTEGERread-writecurrent
ipadAtmFrf5DlciTable
OBJECT-TYPE
Table of Mapped DLCIs for VCCs. This table is used for FRF5 to map one or more DLCIs to a VCC. When only one DLCI is mapped, a one-to-one relationship exists between the DLCI and the VCC. When more than one DLCI is mapped, a many-to-one DLCI/VCC relationship exists.
1.3.6.1.4.1.321.100.1.25.6.2not-accessiblecurrent
ipadAtmFrf5DlciTableEntry
OBJECT-TYPE
An entry in the ipad ATM Vcc parameter table.
1.3.6.1.4.1.321.100.1.25.6.2.1not-accessiblecurrent
ipadAtmFrf5DlciIfIndex
OBJECT-TYPE
The index into the ATM FRF5 DLCI table, corresponding to ifIndex.
1.3.6.1.4.1.321.100.1.25.6.2.1.1INTEGERread-onlycurrent
ipadAtmFrf5DlciVpiIndex
OBJECT-TYPE
The VPI index into the ATM FRF5 DLCI table.
1.3.6.1.4.1.321.100.1.25.6.2.1.2INTEGERread-onlycurrent
ipadAtmFrf5DlciVciIndex
OBJECT-TYPE
The VCI index into the ATM FRF5 DLCI table.
1.3.6.1.4.1.321.100.1.25.6.2.1.3INTEGERread-onlycurrent
ipadAtmFrf5DlciIndex
OBJECT-TYPE
The DLCI index into the ATM FRF5 DLCI table.
1.3.6.1.4.1.321.100.1.25.6.2.1.4INTEGERread-onlycurrent
ipadAtmFrf5DlciEndpointName
OBJECT-TYPE
Identifies the attached endpoint for this FRF5 DLCI.
1.3.6.1.4.1.321.100.1.25.6.2.1.5DisplayString (SIZE(0..11))read-writecurrent
ipadAtmFrf5DlciStatus
OBJECT-TYPE
The current status of this mapped entry.
1.3.6.1.4.1.321.100.1.25.6.2.1.6INTEGER {inactive(1), inactiveLearned(2), active(3), activeLearned(4)}read-onlycurrent
ipadAtmFrf5DlciCongestion
OBJECT-TYPE
Specifies if the dlci is receiving frames with FECN or BECN bit set.
1.3.6.1.4.1.321.100.1.25.6.2.1.7INTEGER {other(1), no(2), yes(3)}read-onlycurrent
ipadAtmFrf8SvcTable
OBJECT-TYPE
Table of ATM FRF8 profile parameters.
1.3.6.1.4.1.321.100.1.25.6.3not-accessiblecurrent
ipadAtmFrf8SvcTableEntry
OBJECT-TYPE
An entry in the ipad ATM FRF8 service table.
1.3.6.1.4.1.321.100.1.25.6.3.1not-accessiblecurrent
ipadAtmFrf8SvcIfIndex
OBJECT-TYPE
The index representing the ATM interface.
1.3.6.1.4.1.321.100.1.25.6.3.1.1INTEGERread-onlycurrent
ipadAtmFrf8SvcVpiIndex
OBJECT-TYPE
The index representing the VPI of the VCC.
1.3.6.1.4.1.321.100.1.25.6.3.1.2INTEGERread-onlycurrent
ipadAtmFrf8SvcVciIndex
OBJECT-TYPE
The index representing the VCI of the VCC.
1.3.6.1.4.1.321.100.1.25.6.3.1.3INTEGERread-onlycurrent
ipadAtmFrf8SvcDeToClpMappingMode
OBJECT-TYPE
This object describes which mode of translation is in use for loss priority mapping in the frame relay to ATM direction. mode1(1) = the DE field in the Q.922 core frame shall be mapped to the ATM CLP field of every cell generated by the segmentation process of the AAL5 PDU containing the information of that frame. mode2Contst0(2) = the ATM CLP field of every cell generated by the segmentation process of the AAL5 PDU containing the information of that frame shall be set to constant 0. mode2Contst1(3) = the ATM CLP field of every cell generated by the segmentation process of the AAL5 PDU containing the information of that frame shall be set to constant 1.
1.3.6.1.4.1.321.100.1.25.6.3.1.4INTEGER {mode1(1), mode2Const0(2), mode2Const1(3)}read-writecurrent
ipadAtmFrf8SvcClpToDeMappingMode
OBJECT-TYPE
This object describes which mode of translation is in use for loss priority mapping in the ATM to frame relay direction. mode1(1) = if one or more cells in a frame has its CLP field set, the DE field of the Q.922 core frame should be set. mode2Const0(2) = the DE field of the Q.922 core frame should be set to the constant 0. mode2Const1(3) = the DE field of the Q.922 core frame should be set to the constant 1.
1.3.6.1.4.1.321.100.1.25.6.3.1.5INTEGER {mode1(1), mode2Const0(2), mode2Const1(3)}read-writecurrent
ipadAtmFrf8SvcCongestionMappingMode
OBJECT-TYPE
This object describes which mode of translation is in use for forward congestion indication mapping in the frame relay to ATM direction. mode1(1) = The FECN field in the Q.922 core frame shall be mapped to the ATM EFCI field of every cell generated by the segmentation process of the AAL5 PDU containing the information of that frame. mode2(2) = The FECN field in the Q.922 core frame shall not be mapped to the ATM EFCI field of cells generated by the segmentation process of the AAL5 PDU containing the information of that frame. The EFCI field is always set to 'congestion not experienced'. In both of the modes above, if there is congestion in the forward direction in the ATM layer within the IWF, then the IWF can set the EFCI field to 'congestion experienced'.
1.3.6.1.4.1.321.100.1.25.6.3.1.6INTEGER {mode1(1), mode2(2)}read-writecurrent
ipadAtmFrf8SvcEncapsulationMappingMode
OBJECT-TYPE
This object indicates whether the mapping of upper layer protocol encapsulation is enabled on this interworking connection. transparentMode(1) = Forward the encapsulations unaltered. translationMode(2) = Perform mapping between the two encapsulations due to the incompatibilities of the two methods.
1.3.6.1.4.1.321.100.1.25.6.3.1.7INTEGER {transparentMode(1), translationMode(2)}read-writecurrent
ipadAtmFrf8SvcEndpointName
OBJECT-TYPE
Identifies the Frame Relay endpoint for this FRF8 Service.
1.3.6.1.4.1.321.100.1.25.6.3.1.8DisplayString (SIZE(0..11))read-writecurrent