MIBs Depot

IEEE8021-Q-BRIDGE-MIB

Registered at
1.3.111.2.802.1.1.4
Last updated
2022-11-08 00:00
Organization
IEEE 802.1 Working Group
Revisions
2022-11-08 00:00, 2018-07-01 00:00, 2014-12-15 00:00, 2011-12-12 00:00, 2011-02-27 00:00, 2008-10-15 00:00
Namespace
standard
Source file
IEEE8021-Q-BRIDGE-MIB
Digest
sha256:59099518c34f8034b5e6045815c793417a24087332ee7ee5ce6c49b659260152

Description

The VLAN Bridge MIB module for managing Virtual Bridged Local Area Networks, as defined by IEEE Std 802.1Q. Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q-2022. Copyright (C) IEEE (2022). This version of this MIB module is part of IEEE Std 802.1Q; see that standard for full legal notices.

Contact

WG-URL: http://www.ieee802.org/1/ WG-EMail: stds-802-1-l@ieee.org Contact: IEEE 802.1 Working Group Chair Postal: C/O IEEE 802.1 Working Group IEEE Standards Association 445 Hoes Lane Piscataway, NJ 08854 USA E-mail: stds-802-1-chairs@ieee.org

Imports

FromSymbols
IEEE8021-BRIDGE-MIBieee8021BridgeBasePort, ieee8021BridgeBasePortComponentId, ieee8021BridgeBasePortEntry
IEEE8021-TC-MIBIEEE8021BridgePortNumber, IEEE8021BridgePortNumberOrZero, IEEE8021PbbComponentIdentifier, IEEE8021PortAcceptableFrameTypes, IEEE8021VlanIndex, IEEE8021VlanIndexOrWildcard, ieee802dot1mibs
Q-BRIDGE-MIBPortList, VlanId
RMON2-MIBTimeFilter
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter64, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, StorageType, TEXTUAL-CONVENTION, TruthValue

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
IANAifType-MIB
IEEE8021-BRIDGE-MIB
IEEE8021-Q-BRIDGE-MIB
IEEE8021-TC-MIB
IF-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TOKEN-RING-RMON-MIB

Objects

NameOIDSyntaxAccessStatus
ieee8021QBridgeMibObjects
OBJECT-IDENTITY
1.3.111.2.802.1.1.4.1
ieee8021QBridgeBase
OBJECT-IDENTITY
1.3.111.2.802.1.1.4.1.1
ieee8021QBridgeTable
OBJECT-TYPE
A table that contains generic information about every VLAN Bridge.
1.3.111.2.802.1.1.4.1.1.1not-accessiblecurrent
ieee8021QBridgeEntry
OBJECT-TYPE
A list of objects containing information for each VLAN Bridge.
1.3.111.2.802.1.1.4.1.1.1.1not-accessiblecurrent
ieee8021QBridgeComponentId
OBJECT-TYPE
The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.
1.3.111.2.802.1.1.4.1.1.1.1.1IEEE8021PbbComponentIdentifiernot-accessiblecurrent
ieee8021QBridgeVlanVersionNumber
OBJECT-TYPE
The version number of IEEE 802.1Q that this device supports. Reported as 1 by VLAN Bridges that support only SST operation, and reported as 2 by VLAN Bridges that support MST operation.
1.3.111.2.802.1.1.4.1.1.1.1.2INTEGER {version1(1), version2(2)}read-onlycurrent
ieee8021QBridgeMaxVlanId
OBJECT-TYPE
The maximum IEEE 802.1Q VLAN-ID that this device supports.
1.3.111.2.802.1.1.4.1.1.1.1.3VlanIdread-onlycurrent
ieee8021QBridgeMaxSupportedVlans
OBJECT-TYPE
The maximum number of IEEE 802.1Q VLANs that this device supports.
1.3.111.2.802.1.1.4.1.1.1.1.4Unsigned32read-onlycurrent
ieee8021QBridgeNumVlans
OBJECT-TYPE
The current number of IEEE 802.1Q VLANs that are configured in this device.
1.3.111.2.802.1.1.4.1.1.1.1.5Gauge32read-onlycurrent
ieee8021QBridgeMvrpEnabledStatus
OBJECT-TYPE
The administrative status requested by management for MVRP. The value true(1) indicates that MVRP should be enabled on this device, on all ports for which it has not been specifically disabled. When false(2), MVRP is disabled on all ports, and all MVRP packets will be forwarded transparently. This object affects all MVRP Applicant and Registrar state machines. A transition from false(2) to true(1) will cause a reset of all MVRP state machines on all ports. The value of this object MUST be retained across reinitializations of the management system.
1.3.111.2.802.1.1.4.1.1.1.1.6TruthValueread-writecurrent
ieee8021QBridgeCVlanPortTable
OBJECT-TYPE
This table provides the capability to create and delete customer VLAN ports. Entries in this table must be persistent over power up restart/reboot.
1.3.111.2.802.1.1.4.1.1.2not-accessiblecurrent
ieee8021QBridgeCVlanPortEntry
OBJECT-TYPE
A list of objects containing information for each VLAN Bridge.
1.3.111.2.802.1.1.4.1.1.2.1not-accessiblecurrent
ieee8021QBridgeCVlanPortComponentId
OBJECT-TYPE
The component containing the customer VLAN port represented by this row.
1.3.111.2.802.1.1.4.1.1.2.1.1IEEE8021PbbComponentIdentifiernot-accessiblecurrent
ieee8021QBridgeCVlanPortNumber
OBJECT-TYPE
The customer VLAN port number represented by this row.
1.3.111.2.802.1.1.4.1.1.2.1.2IEEE8021BridgePortNumbernot-accessiblecurrent
ieee8021QBridgeCVlanPortRowStatus
OBJECT-TYPE
This indicates the status of the entry, and is used to create and delete entries in this table. Each entry in this table that is valid will have a corresponding entry in the ieee8021BridgeBasePortTable whose value for ieee8021BridgeBasePortType is customerVlanPort(2). The corresponding value of ieee8021BridgeBasePortIfIndex must be set at the time the value of this object transitions to valid(1). Entries in this table must be persistent across reinitializations of the management system.
1.3.111.2.802.1.1.4.1.1.2.1.3RowStatusread-createcurrent
ieee8021QBridgeTp
OBJECT-IDENTITY
1.3.111.2.802.1.1.4.1.2
ieee8021QBridgeFdbTable
OBJECT-TYPE
A table that contains configuration and control information for each Filtering Database currently operating on this device. Entries in this table appear automatically when VLANs are assigned FDB IDs in the ieee8021QBridgeVlanCurrentTable.
1.3.111.2.802.1.1.4.1.2.1not-accessiblecurrent
ieee8021QBridgeFdbEntry
OBJECT-TYPE
Information about a specific Filtering Database.
1.3.111.2.802.1.1.4.1.2.1.1not-accessiblecurrent
ieee8021QBridgeFdbComponentId
OBJECT-TYPE
The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.
1.3.111.2.802.1.1.4.1.2.1.1.1IEEE8021PbbComponentIdentifiernot-accessiblecurrent
ieee8021QBridgeFdbId
OBJECT-TYPE
The identity of this Filtering Database.
1.3.111.2.802.1.1.4.1.2.1.1.2Unsigned32 (0..4294967295)not-accessiblecurrent
ieee8021QBridgeFdbDynamicCount
OBJECT-TYPE
The current number of dynamic entries in this Filtering Database.
1.3.111.2.802.1.1.4.1.2.1.1.3Gauge32read-onlycurrent
ieee8021QBridgeFdbLearnedEntryDiscards
OBJECT-TYPE
The total number of Filtering Database entries that have been or would have been learned, but have been discarded due to a lack of storage space in the Filtering Database. If this counter is increasing, it indicates that the Filtering Database is regularly becoming full (a condition that has unpleasant performance effects on the subnetwork). If this counter has a significant value but is not presently increasing, it indicates that the problem has been occurring but is not persistent. Discontinuities in the value of the counter can occur at re-initialization of the management system.
1.3.111.2.802.1.1.4.1.2.1.1.4Counter64read-onlycurrent
ieee8021QBridgeFdbAgingTime
OBJECT-TYPE
The timeout period in seconds for aging out dynamically-learned forwarding information. IEEE Std 802.1D-1998 recommends a default of 300 seconds. The value of this object MUST be retained across reinitializations of the management system.
1.3.111.2.802.1.1.4.1.2.1.1.5Integer32 (10..1000000)read-writecurrent
ieee8021QBridgeTpFdbTable
OBJECT-TYPE
A table that contains information about unicast entries for which the device has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.
1.3.111.2.802.1.1.4.1.2.2not-accessiblecurrent
ieee8021QBridgeTpFdbEntry
OBJECT-TYPE
Information about a specific unicast MAC address for which the device has some forwarding and/or filtering information.
1.3.111.2.802.1.1.4.1.2.2.1not-accessiblecurrent
ieee8021QBridgeTpFdbAddress
OBJECT-TYPE
A unicast MAC address for which the device has forwarding and/or filtering information.
1.3.111.2.802.1.1.4.1.2.2.1.1MacAddressnot-accessiblecurrent
ieee8021QBridgeTpFdbPort
OBJECT-TYPE
Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of ieee8021QBridgeTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that the device does have some forwarding/filtering information about this address (e.g., in the ieee8021QBridgeStaticUnicastTable). Implementors are encouraged to assign the port value to this object whenever it is learned, even for addresses for which the corresponding value of ieee8021QBridgeTpFdbStatus is not learned(3).
1.3.111.2.802.1.1.4.1.2.2.1.2IEEE8021BridgePortNumberOrZeroread-onlycurrent
ieee8021QBridgeTpFdbStatus
OBJECT-TYPE
The status of this entry. The meanings of the values are: other(1) - none of the following. This may include the case where some other MIB object (not the corresponding instance of ieee8021QBridgeTpFdbPort, nor an entry in the ieee8021QBridgeStaticUnicastTable) is being used to determine if and how frames addressed to the value of the corresponding instance of ieee8021QBridgeTpFdbAddress are being forwarded. invalid(2) - this entry is no longer valid (e.g., it was learned but has since aged out), but has not yet been flushed from the table. learned(3) - the value of the corresponding instance of ieee8021QBridgeTpFdbPort was learned and is being used. self(4) - the value of the corresponding instance of ieee8021QBridgeTpFdbAddress represents one of the device's addresses. The corresponding instance of ieee8021QBridgeTpFdbPort indicates which of the device's ports has this address. mgmt(5) - the value of the corresponding instance of ieee8021QBridgeTpFdbAddress is also the value of an existing instance of ieee8021QBridgeStaticUnicastAddress.
1.3.111.2.802.1.1.4.1.2.2.1.3INTEGER {other(1), invalid(2), learned(3), self(4), mgmt(5)}read-onlycurrent
ieee8021QBridgeTpGroupTable
OBJECT-TYPE
A table containing filtering information for VLANs configured into the Bridge by (local or network) management, or learned dynamically, specifying the set of ports to which frames received on a VLAN for this FDB and containing a specific Group destination address are allowed to be forwarded.
1.3.111.2.802.1.1.4.1.2.3not-accessiblecurrent
ieee8021QBridgeTpGroupEntry
OBJECT-TYPE
Filtering information configured into the Bridge by management, or learned dynamically, specifying the set of ports to which frames received on a VLAN and containing a specific Group destination address are allowed to be forwarded. The subset of these ports learned dynamically is also provided.
1.3.111.2.802.1.1.4.1.2.3.1not-accessiblecurrent
ieee8021QBridgeTpGroupAddress
OBJECT-TYPE
The destination Group MAC address in a frame to which this entry's filtering information applies.
1.3.111.2.802.1.1.4.1.2.3.1.1MacAddressnot-accessiblecurrent
ieee8021QBridgeTpGroupEgressPorts
OBJECT-TYPE
The complete set of ports, in this VLAN, to which frames destined for this Group MAC address are currently being explicitly forwarded. This does not include ports for which this address is only implicitly forwarded, in the ieee8021QBridgeForwardAllPorts list.
1.3.111.2.802.1.1.4.1.2.3.1.2PortListread-onlycurrent
ieee8021QBridgeTpGroupLearnt
OBJECT-TYPE
The subset of ports in ieee8021QBridgeTpGroupEgressPorts that were learned by MMRP or some other dynamic mechanism, in this Filtering database.
1.3.111.2.802.1.1.4.1.2.3.1.3PortListread-onlycurrent
ieee8021QBridgeForwardAllTable
OBJECT-TYPE
A table containing forwarding information for each VLAN, specifying the set of ports to which forwarding of all multicasts applies, configured statically by management or dynamically by MMRP. An entry appears in this table for all VLANs that are currently instantiated.
1.3.111.2.802.1.1.4.1.2.4not-accessiblecurrent
ieee8021QBridgeForwardAllEntry
OBJECT-TYPE
Forwarding information for a VLAN, specifying the set of ports to which all multicasts should be forwarded, configured statically by management or dynamically by MMRP.
1.3.111.2.802.1.1.4.1.2.4.1not-accessiblecurrent
ieee8021QBridgeForwardAllVlanIndex
OBJECT-TYPE
The VLAN-ID or other identifier referring to this VLAN.
1.3.111.2.802.1.1.4.1.2.4.1.1IEEE8021VlanIndexOrWildcardnot-accessiblecurrent
ieee8021QBridgeForwardAllPorts
OBJECT-TYPE
The complete set of ports in this VLAN to which all multicast group-addressed frames are to be forwarded. This includes ports for which this need has been determined dynamically by MMRP, or configured statically by management.
1.3.111.2.802.1.1.4.1.2.4.1.2PortListread-onlycurrent
ieee8021QBridgeForwardAllStaticPorts
OBJECT-TYPE
The set of ports configured by management in this VLAN to which all multicast group-addressed frames are to be forwarded. Ports entered in this list will also appear in the complete set shown by ieee8021QBridgeForwardAllPorts. This value will be restored after the device is reset. This only applies to ports that are members of the VLAN, defined by ieee8021QBridgeVlanCurrentEgressPorts. A port may not be added in this set if it is already a member of the set of ports in ieee8021QBridgeForwardAllForbiddenPorts. The default value is a string of ones of appropriate length, to indicate the standard behavior of using basic filtering services, i.e., forward all multicasts to all ports. The value of this object MUST be retained across reinitializations of the management system.
1.3.111.2.802.1.1.4.1.2.4.1.3PortListread-writecurrent
ieee8021QBridgeForwardAllForbiddenPorts
OBJECT-TYPE
The set of ports configured by management in this VLAN for which the Service Requirement attribute Forward All Multicast Groups may not be dynamically registered by MMRP. This value will be restored after the device is reset. A port may not be added in this set if it is already a member of the set of ports in ieee8021QBridgeForwardAllStaticPorts. The default value is a string of zeros of appropriate length. The value of this object MUST be retained across reinitializations of the management system.
1.3.111.2.802.1.1.4.1.2.4.1.4PortListread-writecurrent
ieee8021QBridgeForwardUnregisteredTable
OBJECT-TYPE
A table containing forwarding information for each VLAN, specifying the set of ports to which forwarding of multicast group-addressed frames for which no more specific forwarding information applies. This is configured statically by management and determined dynamically by MMRP. An entry appears in this table for all VLANs that are currently instantiated.
1.3.111.2.802.1.1.4.1.2.5not-accessiblecurrent
ieee8021QBridgeForwardUnregisteredEntry
OBJECT-TYPE
Forwarding information for a VLAN, specifying the set of ports to which all multicasts for which there is no more specific forwarding information shall be forwarded. This is configured statically by management or dynamically by MMRP.
1.3.111.2.802.1.1.4.1.2.5.1not-accessiblecurrent
ieee8021QBridgeForwardUnregisteredVlanIndex
OBJECT-TYPE
The VLAN-ID or other identifier referring to this VLAN.
1.3.111.2.802.1.1.4.1.2.5.1.1IEEE8021VlanIndexOrWildcardnot-accessiblecurrent
ieee8021QBridgeForwardUnregisteredPorts
OBJECT-TYPE
The complete set of ports in this VLAN to which multicast group-addressed frames for which there is no more specific forwarding information will be forwarded. This includes ports for which this need has been determined dynamically by MMRP, or configured statically by management.
1.3.111.2.802.1.1.4.1.2.5.1.2PortListread-onlycurrent
ieee8021QBridgeForwardUnregisteredStaticPorts
OBJECT-TYPE
The set of ports configured by management, in this VLAN, to which multicast group-addressed frames for which there is no more specific forwarding information are to be forwarded. Ports entered in this list will also appear in the complete set shown by ieee8021QBridgeForwardUnregisteredPorts. This value will be restored after the device is reset. A port may not be added in this set if it is already a member of the set of ports in ieee8021QBridgeForwardUnregisteredForbiddenPorts. The default value is a string of zeros of appropriate length, although this has no effect with the default value of ieee8021QBridgeForwardAllStaticPorts. The value of this object MUST be retained across reinitializations of the management system.
1.3.111.2.802.1.1.4.1.2.5.1.3PortListread-writecurrent
ieee8021QBridgeForwardUnregisteredForbiddenPorts
OBJECT-TYPE
The set of ports configured by management in this VLAN for which the Service Requirement attribute Forward Unregistered Multicast Groups may not be dynamically registered by MMRP. This value will be restored after the device is reset. A port may not be added in this set if it is already a member of the set of ports in ieee8021QBridgeForwardUnregisteredStaticPorts. The default value is a string of zeros of appropriate length. The value of this object MUST be retained across reinitializations of the management system.
1.3.111.2.802.1.1.4.1.2.5.1.4PortListread-writecurrent
ieee8021QBridgeStatic
OBJECT-IDENTITY
1.3.111.2.802.1.1.4.1.3
ieee8021QBridgeStaticUnicastTable
OBJECT-TYPE
A table containing filtering information for Unicast MAC addresses for each Filtering Database, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific unicast destination addresses are allowed to be forwarded. Entries are valid for unicast addresses only. Two modes of operation are supported by this table. When the receive port index is non-zero, this table is supporting an IEEE 802.1D filtering database as specified in 14.7.6.1 of IEEE Std 802.1D. If the receive port is zero, the table is operating as specified in IEEE Std 802.1Q 8.8.1 and 12.7.7. An agent must at least support the IEEE Std 802.1Q mode of operation.
1.3.111.2.802.1.1.4.1.3.1not-accessiblecurrent
ieee8021QBridgeStaticUnicastEntry
OBJECT-TYPE
Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific unicast destination address are allowed to be forwarded.
1.3.111.2.802.1.1.4.1.3.1.1not-accessiblecurrent
ieee8021QBridgeStaticUnicastComponentId
OBJECT-TYPE
The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.
1.3.111.2.802.1.1.4.1.3.1.1.1IEEE8021PbbComponentIdentifiernot-accessiblecurrent
ieee8021QBridgeStaticUnicastVlanIndex
OBJECT-TYPE
The Vlan to which this entry applies.
1.3.111.2.802.1.1.4.1.3.1.1.2IEEE8021VlanIndexOrWildcardnot-accessiblecurrent
ieee8021QBridgeStaticUnicastAddress
OBJECT-TYPE
The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a unicast address.
1.3.111.2.802.1.1.4.1.3.1.1.3MacAddressnot-accessiblecurrent
ieee8021QBridgeStaticUnicastReceivePort
OBJECT-TYPE
Either the value '0' or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the device for which there is no other applicable entry. An implementation is required to support the '0' value and may optionally support non-zero values for this column.
1.3.111.2.802.1.1.4.1.3.1.1.4IEEE8021BridgePortNumberOrZeronot-accessiblecurrent
ieee8021QBridgeStaticUnicastStaticEgressPorts
OBJECT-TYPE
The set of ports to which frames received from a specific port and destined for a specific unicast address must be forwarded, regardless of any dynamic information, e.g., from MMRP. A port may not be added in this set if it is already a member of the set of ports in ieee8021QBridgeStaticUnicastForbiddenEgressPorts. The default value of this object is a string of ones of appropriate length.
1.3.111.2.802.1.1.4.1.3.1.1.5PortListread-createcurrent
ieee8021QBridgeStaticUnicastForbiddenEgressPorts
OBJECT-TYPE
The set of ports to which frames received from a specific port and destined for a specific unicast MAC address must not be forwarded, regardless of any dynamic information, e.g., from MMRP. A port may not be added in this set if it is already a member of the set of ports in ieee8021QBridgeStaticUnicastStaticEgressPorts. The default value of this object is a string of zeros of appropriate length.
1.3.111.2.802.1.1.4.1.3.1.1.6PortListread-createcurrent
ieee8021QBridgeStaticUnicastStorageType
OBJECT-TYPE
The storage type for this conceptual row. If this object has a value of permanent(4), then no other objects are required to be able to be modified.
1.3.111.2.802.1.1.4.1.3.1.1.7StorageTyperead-createcurrent
ieee8021QBridgeStaticUnicastRowStatus
OBJECT-TYPE
This object indicates the status of this entry, and is used to create/delete entries in the table. An entry of this table may be set to active without setting any other columns of the table. Also, other columns of this table may be set while the value of this object is active(1).
1.3.111.2.802.1.1.4.1.3.1.1.8RowStatusread-createcurrent
ieee8021QBridgeStaticMulticastTable
OBJECT-TYPE
A table containing filtering information for Multicast and Broadcast MAC addresses for each VLAN, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific Multicast and Broadcast destination addresses are allowed to be forwarded. A value of zero in this table (as the port number from which frames with a specific destination address are received) is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for Multicast and Broadcast addresses only.
1.3.111.2.802.1.1.4.1.3.2not-accessiblecurrent
ieee8021QBridgeStaticMulticastEntry
OBJECT-TYPE
Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from this specific port for this VLAN and containing this Multicast or Broadcast destination address are allowed to be forwarded.
1.3.111.2.802.1.1.4.1.3.2.1not-accessiblecurrent
ieee8021QBridgeStaticMulticastAddress
OBJECT-TYPE
The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a Multicast or Broadcast address.
1.3.111.2.802.1.1.4.1.3.2.1.1MacAddressnot-accessiblecurrent
ieee8021QBridgeStaticMulticastReceivePort
OBJECT-TYPE
Either the value '0' or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the device for which there is no other applicable entry. An implementation is required to support the '0' value and may optionally support non-zero values for this column.
1.3.111.2.802.1.1.4.1.3.2.1.2IEEE8021BridgePortNumberOrZeronot-accessiblecurrent
ieee8021QBridgeStaticMulticastStaticEgressPorts
OBJECT-TYPE
The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must be forwarded, regardless of any dynamic information, e.g., from MMRP. A port may not be added in this set if it is already a member of the set of ports in ieee8021QBridgeStaticMulticastForbiddenEgressPorts. The default value of this object is a string of ones of appropriate length.
1.3.111.2.802.1.1.4.1.3.2.1.3PortListread-createcurrent
ieee8021QBridgeStaticMulticastForbiddenEgressPorts
OBJECT-TYPE
The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must not be forwarded, regardless of any dynamic information, e.g., from MMRP. A port may not be added in this set if it is already a member of the set of ports in ieee8021QBridgeStaticMulticastStaticEgressPorts. The default value of this object is a string of zeros of appropriate length.
1.3.111.2.802.1.1.4.1.3.2.1.4PortListread-createcurrent
ieee8021QBridgeStaticMulticastStorageType
OBJECT-TYPE
The storage type for this conceptual row. If this object has a value of permanent(4), then no other objects are required to be able to be modified.
1.3.111.2.802.1.1.4.1.3.2.1.5StorageTyperead-createcurrent
ieee8021QBridgeStaticMulticastRowStatus
OBJECT-TYPE
This object indicates the status of this entry, and is used to create/delete entries in the table. An entry of this table may be set to active without setting any other columns of the table. Also, other columns of this table may be set while the value of this object is active(1).
1.3.111.2.802.1.1.4.1.3.2.1.6RowStatusread-createcurrent
ieee8021QBridgeVlan
OBJECT-IDENTITY
1.3.111.2.802.1.1.4.1.4
ieee8021QBridgeVlanNumDeletes
OBJECT-TYPE
The number of times a VLAN entry has been deleted from the ieee8021QBridgeVlanCurrentTable (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. Discontinuities in this value can only occur at a reboot.
1.3.111.2.802.1.1.4.1.4.1Counter64read-onlycurrent
ieee8021QBridgeVlanCurrentTable
OBJECT-TYPE
A table containing current configuration information for each VLAN currently configured into the device by (local or network) management, or dynamically created as a result of MVRP requests received.
1.3.111.2.802.1.1.4.1.4.2not-accessiblecurrent
ieee8021QBridgeVlanCurrentEntry
OBJECT-TYPE
Information for a VLAN configured into the device by (local or network) management, or dynamically created as a result of MVRP requests received.
1.3.111.2.802.1.1.4.1.4.2.1not-accessiblecurrent
ieee8021QBridgeVlanTimeMark
OBJECT-TYPE
A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
1.3.111.2.802.1.1.4.1.4.2.1.1TimeFilternot-accessiblecurrent
ieee8021QBridgeVlanCurrentComponentId
OBJECT-TYPE
The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.
1.3.111.2.802.1.1.4.1.4.2.1.2IEEE8021PbbComponentIdentifiernot-accessiblecurrent
ieee8021QBridgeVlanIndex
OBJECT-TYPE
The VLAN-ID or other identifier referring to this VLAN.
1.3.111.2.802.1.1.4.1.4.2.1.3IEEE8021VlanIndexnot-accessiblecurrent
ieee8021QBridgeVlanFdbId
OBJECT-TYPE
The Filtering Database used by this VLAN. This is one of the ieee8021QBridgeFdbId values in the ieee8021QBridgeFdbTable. This value is allocated automatically by the device whenever the VLAN is created: either dynamically by MVRP, or by management, in ieee8021QBridgeVlanStaticTable. Allocation of this value follows the learning constraints defined for this VLAN in ieee8021QBridgeLearningConstraintsTable.
1.3.111.2.802.1.1.4.1.4.2.1.4Unsigned32read-onlycurrent
ieee8021QBridgeVlanCurrentEgressPorts
OBJECT-TYPE
The set of ports that are transmitting traffic for this VLAN as either tagged or untagged frames.
1.3.111.2.802.1.1.4.1.4.2.1.5PortListread-onlycurrent
ieee8021QBridgeVlanCurrentUntaggedPorts
OBJECT-TYPE
The set of ports that are transmitting traffic for this VLAN as untagged frames.
1.3.111.2.802.1.1.4.1.4.2.1.6PortListread-onlycurrent
ieee8021QBridgeVlanStatus
OBJECT-TYPE
This object indicates the status of this entry. other(1) - this entry is currently in use, but the conditions under which it will remain so differ from the following values. permanent(2) - this entry, corresponding to an entry in ieee8021QBridgeVlanStaticTable, is currently in use and will remain so after the next reset of the device. The port lists for this entry include ports from the equivalent ieee8021QBridgeVlanStaticTable entry and ports learned dynamically. dynamicMvrp(3) - this entry is currently in use and will remain so until removed by MVRP. There is no static entry for this VLAN, and it will be removed when the last port leaves the VLAN.
1.3.111.2.802.1.1.4.1.4.2.1.7INTEGER {other(1), permanent(2), dynamicMvrp(3)}read-onlycurrent
ieee8021QBridgeVlanCreationTime
OBJECT-TYPE
The value of sysUpTime when this VLAN was created.
1.3.111.2.802.1.1.4.1.4.2.1.8TimeTicksread-onlycurrent
ieee8021QBridgeVlanStaticTable
OBJECT-TYPE
A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are persistent and will be restored after the device is reset.
1.3.111.2.802.1.1.4.1.4.3not-accessiblecurrent
ieee8021QBridgeVlanStaticEntry
OBJECT-TYPE
Static information for a VLAN configured into the device by (local or network) management.
1.3.111.2.802.1.1.4.1.4.3.1not-accessiblecurrent
ieee8021QBridgeVlanStaticComponentId
OBJECT-TYPE
The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.
1.3.111.2.802.1.1.4.1.4.3.1.1IEEE8021PbbComponentIdentifiernot-accessiblecurrent
ieee8021QBridgeVlanStaticVlanIndex
OBJECT-TYPE
The VLAN-ID or other identifier referring to this VLAN.
1.3.111.2.802.1.1.4.1.4.3.1.2IEEE8021VlanIndexnot-accessiblecurrent
ieee8021QBridgeVlanStaticName
OBJECT-TYPE
An administratively assigned string, which may be used to identify the VLAN.
1.3.111.2.802.1.1.4.1.4.3.1.3SnmpAdminString (SIZE(0..32))read-createcurrent
ieee8021QBridgeVlanStaticEgressPorts
OBJECT-TYPE
The set of ports that are permanently assigned to the egress list for this VLAN by management. Changes to a bit in this object affect the per-port, per-VLAN Registrar control for Registration Fixed for the relevant MVRP state machine on each port. A port may not be added in this set if it is already a member of the set of ports in ieee8021QBridgeVlanForbiddenEgressPorts. The default value of this object is a string of zeros of appropriate length, indicating not fixed.
1.3.111.2.802.1.1.4.1.4.3.1.4PortListread-createcurrent
ieee8021QBridgeVlanForbiddenEgressPorts
OBJECT-TYPE
The set of ports that are prohibited by management from being included in the egress list for this VLAN. Changes to this object that cause a port to be included or excluded affect the per-port, per-VLAN Registrar control for Registration Forbidden for the relevant MVRP state machine on each port. A port may not be added in this set if it is already a member of the set of ports in ieee8021QBridgeVlanStaticEgressPorts. The default value of this object is a string of zeros of appropriate length, excluding all ports from the forbidden set.
1.3.111.2.802.1.1.4.1.4.3.1.5PortListread-createcurrent
ieee8021QBridgeVlanStaticUntaggedPorts
OBJECT-TYPE
The set of ports that should transmit egress frames for this VLAN as untagged. The default value of this object for the default VLAN (ieee8021QBridgeVlanIndex = 1) is a string of appropriate length including all ports. There is no specified default for other VLANs. If a device agent cannot support the set of ports being set, then it will reject the set operation with an error. For example, a manager might attempt to set more than one VLAN to be untagged on egress where the device does not support this IEEE 802.1Q option.
1.3.111.2.802.1.1.4.1.4.3.1.6PortListread-createcurrent
ieee8021QBridgeVlanStaticRowStatus
OBJECT-TYPE
This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1).
1.3.111.2.802.1.1.4.1.4.3.1.7RowStatusread-createcurrent
ieee8021QBridgeNextFreeLocalVlanTable
OBJECT-TYPE
A table that contains information about the next free VLAN value for a statically configured VLAN Bridge.
1.3.111.2.802.1.1.4.1.4.4not-accessiblecurrent
ieee8021QBridgeNextFreeLocalVlanEntry
OBJECT-TYPE
The next free VLAN value for a statically configured VLAN Bridge
1.3.111.2.802.1.1.4.1.4.4.1not-accessiblecurrent
ieee8021QBridgeNextFreeLocalVlanComponentId
OBJECT-TYPE
The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.
1.3.111.2.802.1.1.4.1.4.4.1.1IEEE8021PbbComponentIdentifiernot-accessiblecurrent
ieee8021QBridgeNextFreeLocalVlanIndex
OBJECT-TYPE
The next available value for ieee8021QBridgeVlanIndex of a local VLAN entry in ieee8021QBridgeVlanStaticTable. This will report values >=4096 if a new Local VLAN may be created or else the value 0 if this is not possible. A row creation operation in this table for an entry with a local VlanIndex value may fail if the current value of this object is not used as the index. Even if the value read is used, there is no guarantee that it will still be the valid index when the create operation is attempted; another manager may have already got in during the intervening time interval. In this case, ieee8021QBridgeNextFreeLocalVlanIndex should be re-read and the creation re-tried with the new value. This value will automatically change when the current value is used to create a new row.
1.3.111.2.802.1.1.4.1.4.4.1.2Unsigned32 (0 | 4096..4294967295)read-onlycurrent
ieee8021QBridgePortVlanTable
OBJECT-TYPE
A table containing per-port control and status information for VLAN configuration in the device.
1.3.111.2.802.1.1.4.1.4.5not-accessiblecurrent
ieee8021QBridgePortVlanEntry
OBJECT-TYPE
Information controlling VLAN configuration for a port on the device. This is indexed by ieee8021BridgeBasePort.
1.3.111.2.802.1.1.4.1.4.5.1not-accessiblecurrent
ieee8021QBridgePvid
OBJECT-TYPE
The PVID, the VLAN-ID assigned to untagged frames or Priority-tagged frames received on this port. The value of this object MUST be retained across reinitializations of the management system.
1.3.111.2.802.1.1.4.1.4.5.1.1IEEE8021VlanIndexread-writecurrent
ieee8021QBridgePortAcceptableFrameTypes
OBJECT-TYPE
When this is admitTagged(3), the device will discard untagged frames or Priority-tagged frames received on this port. When admitAll(1), untagged frames or Priority-tagged frames received on this port will be accepted and assigned to a VID based on the PVID and VID Set for this port. This control does not affect VLAN-independent Bridge Protocol Data Unit (BPDU) frames, such as MVRP and Spanning Tree Protocol (STP). It does affect VLAN- dependent BPDU frames, such as MMRP. The value of this object MUST be retained across reinitializations of the management system.
1.3.111.2.802.1.1.4.1.4.5.1.2IEEE8021PortAcceptableFrameTypesread-writecurrent
ieee8021QBridgePortIngressFiltering
OBJECT-TYPE
When this is true(1), the device will discard incoming frames for VLANs that do not include this Port in its Member set. When false(2), the port will accept all incoming frames. This control does not affect VLAN-independent BPDU frames, such as MVRP and STP. It does affect VLAN- dependent BPDU frames, such as MMRP. The value of this object MUST be retained across reinitializations of the management system.
1.3.111.2.802.1.1.4.1.4.5.1.3TruthValueread-writecurrent
ieee8021QBridgePortMvrpEnabledStatus
OBJECT-TYPE
The state of MVRP operation on this port. The value true(1) indicates that MVRP is enabled on this port, as long as ieee8021QBridgeMvrpEnabledStatus is also enabled for this device. When false(2) but ieee8021QBridgeMvrpEnabledStatus is still enabled for the device, MVRP is disabled on this port: any MVRP packets received will be silently discarded, and no MVRP registrations will be propagated from other ports. This object affects all MVRP Applicant and Registrar state machines on this port. A transition from false(2) to true(1) will cause a reset of all MVRP state machines on this port. The value of this object MUST be retained across reinitializations of the management system.
1.3.111.2.802.1.1.4.1.4.5.1.4TruthValueread-writecurrent
ieee8021QBridgePortMvrpFailedRegistrations
OBJECT-TYPE
The total number of failed MVRP registrations, for any reason, on this port. Discontinuities in the value of the counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime object of the associated interface (if any).
1.3.111.2.802.1.1.4.1.4.5.1.5Counter64read-onlycurrent
ieee8021QBridgePortMvrpLastPduOrigin
OBJECT-TYPE
The Source MAC Address of the last MVRP message received on this port.
1.3.111.2.802.1.1.4.1.4.5.1.6MacAddressread-onlycurrent
ieee8021QBridgePortRestrictedVlanRegistration
OBJECT-TYPE
The state of Restricted VLAN Registration on this port. If the value of this control is true(1), then creation of a new dynamic VLAN entry is permitted only if there is a Static VLAN Registration Entry for the VLAN concerned, in which the Registrar Administrative Control value for this port is Normal Registration. The value of this object MUST be retained across reinitializations of the management system.
1.3.111.2.802.1.1.4.1.4.5.1.7TruthValueread-writecurrent
ieee8021QBridgePortVlanStatisticsTable
OBJECT-TYPE
A table containing per-port, per-VLAN statistics for traffic received.
1.3.111.2.802.1.1.4.1.4.6not-accessiblecurrent
ieee8021QBridgePortVlanStatisticsEntry
OBJECT-TYPE
Traffic statistics for a VLAN on an interface.
1.3.111.2.802.1.1.4.1.4.6.1not-accessiblecurrent
ieee8021QBridgeTpVlanPortInFrames
OBJECT-TYPE
The number of valid frames received by this port from its segment that were classified as belonging to this VLAN. Note that a frame received on this port is counted by this object if and only if it is for a protocol being processed by the local forwarding process for this VLAN. This object includes received Bridge management frames classified as belonging to this VLAN (e.g., MMRP, but not MVRP or STP. Discontinuities in the value of the counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime object of the associated interface (if any).
1.3.111.2.802.1.1.4.1.4.6.1.1Counter64read-onlycurrent
ieee8021QBridgeTpVlanPortOutFrames
OBJECT-TYPE
The number of valid frames transmitted by this port to its segment from the local forwarding process for this VLAN. This includes Bridge management frames originated by this device that are classified as belonging to this VLAN (e.g., MMRP, but not MVRP or STP). Discontinuities in the value of the counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime object of the associated interface (if any).
1.3.111.2.802.1.1.4.1.4.6.1.2Counter64read-onlycurrent
ieee8021QBridgeTpVlanPortInDiscards
OBJECT-TYPE
The number of valid frames received by this port from its segment that were classified as belonging to this VLAN and that were discarded due to VLAN-related reasons. Specifically, the IEEE 802.1Q counters for Discard Inbound and Discard on Ingress Filtering. Discontinuities in the value of the counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime object of the associated interface (if any).
1.3.111.2.802.1.1.4.1.4.6.1.3Counter64read-onlycurrent
ieee8021QBridgeLearningConstraintsTable
OBJECT-TYPE
A table containing learning constraints for sets of Shared and Independent VLANs. Entries in this table are persistent and are preserved across reboots.
1.3.111.2.802.1.1.4.1.4.8not-accessibledeprecated
ieee8021QBridgeLearningConstraintsEntry
OBJECT-TYPE
A learning constraint defined for a VLAN.
1.3.111.2.802.1.1.4.1.4.8.1not-accessibledeprecated
ieee8021QBridgeLearningConstraintsComponentId
OBJECT-TYPE
The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.
1.3.111.2.802.1.1.4.1.4.8.1.1IEEE8021PbbComponentIdentifiernot-accessibledeprecated
ieee8021QBridgeLearningConstraintsVlan
OBJECT-TYPE
The index of the row in ieee8021QBridgeVlanCurrentTable for the VLAN constrained by this entry.
1.3.111.2.802.1.1.4.1.4.8.1.2IEEE8021VlanIndexnot-accessibledeprecated
ieee8021QBridgeLearningConstraintsSet
OBJECT-TYPE
The identity of the constraint set to which ieee8021QBridgeLearningConstraintsVlan belongs. These values may be chosen by the management station.
1.3.111.2.802.1.1.4.1.4.8.1.3Integer32 (0..65535)not-accessibledeprecated
ieee8021QBridgeLearningConstraintsType
OBJECT-TYPE
The type of constraint this entry defines. independent(1) - the VLAN, ieee8021QBridgeLearningConstraintsVlan, uses a filtering database independent from all other VLANs in the same set, defined by ieee8021QBridgeLearningConstraintsSet. shared(2) - the VLAN, ieee8021QBridgeLearningConstraintsVlan, shares the same filtering database as all other VLANs in the same set, defined by ieee8021QBridgeLearningConstraintsSet.
1.3.111.2.802.1.1.4.1.4.8.1.4INTEGER {independent(1), shared(2)}read-createdeprecated
ieee8021QBridgeLearningConstraintsStatus
OBJECT-TYPE
The status of this entry. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1).
1.3.111.2.802.1.1.4.1.4.8.1.5RowStatusread-createdeprecated
ieee8021QBridgeLearningConstraintDefaultsTable
OBJECT-TYPE
A table containing learning constraints for sets of Shared and Independent VLANs.
1.3.111.2.802.1.1.4.1.4.9not-accessibledeprecated
ieee8021QBridgeLearningConstraintDefaultsEntry
OBJECT-TYPE
A learning constraint defined for a VLAN.
1.3.111.2.802.1.1.4.1.4.9.1not-accessibledeprecated
ieee8021QBridgeLearningConstraintDefaultsComponentId
OBJECT-TYPE
The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.
1.3.111.2.802.1.1.4.1.4.9.1.1IEEE8021PbbComponentIdentifiernot-accessibledeprecated
ieee8021QBridgeLearningConstraintDefaultsSet
OBJECT-TYPE
The identity of the constraint set to which a VLAN belongs, if there is not an explicit entry for that VLAN in ieee8021QBridgeLearningConstraintsTable. The value of this object MUST be retained across reinitializations of the management system.
1.3.111.2.802.1.1.4.1.4.9.1.2Integer32 (0..65535)read-writedeprecated
ieee8021QBridgeLearningConstraintDefaultsType
OBJECT-TYPE
The type of constraint set to which a VLAN belongs, if there is not an explicit entry for that VLAN in ieee8021QBridgeLearningConstraintsTable. The types are as defined for ieee8021QBridgeLearningConstraintsType. The value of this object MUST be retained across reinitializations of the management system.
1.3.111.2.802.1.1.4.1.4.9.1.3INTEGER {independent(1), shared(2)}read-writedeprecated
ieee8021QBridgeProtocol
OBJECT-IDENTITY
1.3.111.2.802.1.1.4.1.5
ieee8021QBridgeProtocolGroupTable
OBJECT-TYPE
A table that contains mappings from Protocol Templates to Protocol Group Identifiers used for Port-and-Protocol-based VLAN Classification. Entries in this table must be persistent over power up restart/reboot.
1.3.111.2.802.1.1.4.1.5.1not-accessiblecurrent
ieee8021QBridgeProtocolGroupEntry
OBJECT-TYPE
A mapping from a Protocol Template to a Protocol Group Identifier.
1.3.111.2.802.1.1.4.1.5.1.1not-accessiblecurrent
ieee8021QBridgeProtocolGroupComponentId
OBJECT-TYPE
The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.
1.3.111.2.802.1.1.4.1.5.1.1.1IEEE8021PbbComponentIdentifiernot-accessiblecurrent
ieee8021QBridgeProtocolTemplateFrameType
OBJECT-TYPE
The data-link encapsulation format or the 'detagged_frame_type' in a Protocol Template.
1.3.111.2.802.1.1.4.1.5.1.1.2INTEGER {ethernet(1), rfc1042(2), snap8021H(3), snapOther(4), llcOther(5)}not-accessiblecurrent
ieee8021QBridgeProtocolTemplateProtocolValue
OBJECT-TYPE
The identification of the protocol above the data-link layer in a Protocol Template. Depending on the frame type, the octet string will have one of the following values: For 'ethernet', 'rfc1042' and 'snap8021H', this is the 16-bit (2-octet) IEEE 802.3 Type Field. For 'snapOther', this is the 40-bit (5-octet) PID. For 'llcOther', this is the 2-octet IEEE 802.2 Link Service Access Point (LSAP) pair: first octet for Destination Service Access Point (DSAP) and second octet for Source Service Access Point (SSAP).
1.3.111.2.802.1.1.4.1.5.1.1.3OCTET STRING (SIZE(2 | 5))not-accessiblecurrent
ieee8021QBridgeProtocolGroupId
OBJECT-TYPE
Represents a group of protocols that are associated together when assigning a VID to a frame.
1.3.111.2.802.1.1.4.1.5.1.1.4Integer32 (0..2147483647)read-createcurrent
ieee8021QBridgeProtocolGroupRowStatus
OBJECT-TYPE
This object indicates the status of this entry.
1.3.111.2.802.1.1.4.1.5.1.1.5RowStatusread-createcurrent
ieee8021QBridgeProtocolPortTable
OBJECT-TYPE
A table that contains VID sets used for Port-and-Protocol-based VLAN Classification.
1.3.111.2.802.1.1.4.1.5.2not-accessiblecurrent
ieee8021QBridgeProtocolPortEntry
OBJECT-TYPE
A VID set for a port.
1.3.111.2.802.1.1.4.1.5.2.1not-accessiblecurrent
ieee8021QBridgeProtocolPortGroupId
OBJECT-TYPE
Designates a group of protocols in the Protocol Group Database.
1.3.111.2.802.1.1.4.1.5.2.1.1Integer32 (1..2147483647)not-accessiblecurrent
ieee8021QBridgeProtocolPortGroupVid
OBJECT-TYPE
The VID associated with a group of protocols for each port.
1.3.111.2.802.1.1.4.1.5.2.1.2VlanIdread-createcurrent
ieee8021QBridgeProtocolPortRowStatus
OBJECT-TYPE
This object indicates the status of this entry.
1.3.111.2.802.1.1.4.1.5.2.1.3RowStatusread-createcurrent
ieee8021QBridgeVIDX
OBJECT-IDENTITY
1.3.111.2.802.1.1.4.1.6
ieee8021QBridgeVIDXTable
OBJECT-TYPE
This table is used to configure the VID Translation Table defined in 12.10.1.8 and 6.9. The Bridge VID Translation Table is used to implement a mapping between a local VID, and a relay VID, used by the filtering and forwarding process. Each row in this table is indexed by component, port, and local VID value and a value to be used for the specified VID as specified in (6.9). Entries in this table must be persistent over power up restart/reboot.
1.3.111.2.802.1.1.4.1.6.1not-accessiblecurrent
ieee8021QBridgeVIDXEntry
OBJECT-TYPE
An entry for the S-VID translation table, which includes both the Local and Relay S-VIDs.
1.3.111.2.802.1.1.4.1.6.1.1not-accessiblecurrent
ieee8021QBridgeVIDXLocalVid
OBJECT-TYPE
The Local VID after translation received at the ISS or EISS.
1.3.111.2.802.1.1.4.1.6.1.1.1VlanIdnot-accessiblecurrent
ieee8021QBridgeVIDXRelayVid
OBJECT-TYPE
The Relay VID received before translation received at ISS or EISS.
1.3.111.2.802.1.1.4.1.6.1.1.2VlanIdread-createcurrent
ieee8021QBridgeVIDXRowStatus
OBJECT-TYPE
This indicates the status of an entry in this table, and is used to create/delete entries. It is an implementation specific decision as to whether any column in this table may be set while the corresponding instance of this object is valid(1).
1.3.111.2.802.1.1.4.1.6.1.1.3RowStatusread-createcurrent
ieee8021QBridgeEgressVidXTable
OBJECT-TYPE
This table is used to configure the VID Translation Table defined in 12.10.1.9 and 6.9. The Bridge VID Egress Translation Table is used to implement a mapping between a relay VID, and a local VID, used by the filtering and forwarding process. Each row in this table is indexed by component, port, and relay VID value and a value to be used for the specified local VID as specified in (6.9). Entries in this table must be persistent over power up restart/reboot.
1.3.111.2.802.1.1.4.1.6.2not-accessibledeprecated
ieee8021QBridgeEgressVidXEntry
OBJECT-TYPE
An entry for the Egress VID translation table, which includes both the relay and local IDs between which the PNP or CNP translates.
1.3.111.2.802.1.1.4.1.6.2.1not-accessibledeprecated
ieee8021QBridgeEgressVidXRelayVid
OBJECT-TYPE
The Relay VID after translation transmitted to the ISS or EISS.
1.3.111.2.802.1.1.4.1.6.2.1.1VlanIdnot-accessibledeprecated
ieee8021QBridgeEgressVidXLocalVid
OBJECT-TYPE
The Local VID before translation transmitted to the ISS or EISS.
1.3.111.2.802.1.1.4.1.6.2.1.2VlanIdread-createdeprecated
ieee8021QBridgeEgressVidXRowStatus
OBJECT-TYPE
This indicates the status of an entry in this table, and is used to create/delete entries. It is an implementation specific decision as to whether any column in this table may be set while the corresponding instance of this object is valid(1).
1.3.111.2.802.1.1.4.1.6.2.1.3RowStatusread-createdeprecated
ieee8021QBridgeEgressVidXV2Table
OBJECT-TYPE
This table is used to configure the VID Translation Table defined in 12.10.1.9 and 6.9. The Bridge VID Egress Translation Table is used to implement a mapping between a relay VID, and a local VID, used by the filtering and forwarding process. Each row in this table is indexed by component, port, and relay VID value and a value to be used for the specified local VID as specified in (6.9). Entries in this table must be persistent over power up restart/reboot.
1.3.111.2.802.1.1.4.1.6.3not-accessiblecurrent
ieee8021QBridgeEgressVidXV2Entry
OBJECT-TYPE
An entry for the Egress VID translation table, which includes both the relay and local IDs between which the PNP or CNP translates.
1.3.111.2.802.1.1.4.1.6.3.1not-accessiblecurrent
ieee8021QBridgeEgressVidXV2RelayVid
OBJECT-TYPE
The Relay VID after translation transmitted to the ISS or EISS.
1.3.111.2.802.1.1.4.1.6.3.1.1VlanIdnot-accessiblecurrent
ieee8021QBridgeEgressVidXV2LocalVid
OBJECT-TYPE
The Local VID before translation transmitted to the ISS or EISS.
1.3.111.2.802.1.1.4.1.6.3.1.2VlanIdread-createcurrent
ieee8021QBridgeEgressVidXV2RowStatus
OBJECT-TYPE
This indicates the status of an entry in this table, and is used to create/delete entries. It is an implementation specific decision as to whether any column in this table may be set while the corresponding instance of this object is valid(1).
1.3.111.2.802.1.1.4.1.6.3.1.3RowStatusread-createcurrent
ieee8021QBridgeConformance
OBJECT-IDENTITY
1.3.111.2.802.1.1.4.2
ieee8021QBridgeGroups
OBJECT-IDENTITY
1.3.111.2.802.1.1.4.2.1
ieee8021QBridgeCompliances
OBJECT-IDENTITY
1.3.111.2.802.1.1.4.2.2

Conformance

NameOIDStatus
ieee8021QBridgeBaseGroup
OBJECT-GROUP
A collection of objects providing device-level control and status information for the VLAN Bridge services.
1.3.111.2.802.1.1.4.2.1.1current
ieee8021QBridgeFdbUnicastGroup
OBJECT-GROUP
A collection of objects providing information about all unicast addresses, learned dynamically or statically configured by management, in each Filtering Database.
1.3.111.2.802.1.1.4.2.1.2current
ieee8021QBridgeFdbMulticastGroup
OBJECT-GROUP
A collection of objects providing information about all multicast addresses, learned dynamically or statically configured by management, in each Filtering Database.
1.3.111.2.802.1.1.4.2.1.3current
ieee8021QBridgeServiceRequirementsGroup
OBJECT-GROUP
A collection of objects providing information about service requirements, learned dynamically or statically configured by management, in each Filtering Database.
1.3.111.2.802.1.1.4.2.1.4current
ieee8021QBridgeFdbStaticGroup
OBJECT-GROUP
A collection of objects providing information about unicast and multicast addresses statically configured by management, in each Filtering Database or VLAN.
1.3.111.2.802.1.1.4.2.1.5current
ieee8021QBridgeVlanGroup
OBJECT-GROUP
A collection of objects providing information about all VLANs currently configured on this device.
1.3.111.2.802.1.1.4.2.1.6current
ieee8021QBridgeVlanStaticGroup
OBJECT-GROUP
A collection of objects providing information about VLANs statically configured by management.
1.3.111.2.802.1.1.4.2.1.7current
ieee8021QBridgeVlanStatisticsGroup
OBJECT-GROUP
A collection of objects providing per-port frame statistics for all VLANs currently configured on this device.
1.3.111.2.802.1.1.4.2.1.8current
ieee8021QBridgeLearningConstraintsGroup
OBJECT-GROUP
A collection of objects defining the Filtering Database constraints all VLANs have with each other.
1.3.111.2.802.1.1.4.2.1.9deprecated
ieee8021QBridgeLearningConstraintDefaultGroup
OBJECT-GROUP
A collection of objects defining the default Filtering Database constraints for VLANs that have no specific constraints defined.
1.3.111.2.802.1.1.4.2.1.10deprecated
ieee8021QBridgeClassificationDeviceGroup
OBJECT-GROUP
VLAN classification information for the Bridge.
1.3.111.2.802.1.1.4.2.1.11current
ieee8021QBridgeClassificationPortGroup
OBJECT-GROUP
VLAN classification information for individual ports.
1.3.111.2.802.1.1.4.2.1.12current
ieee8021QBridgePortGroup2
OBJECT-GROUP
A collection of objects providing port-level VLAN control and status information for all ports.
1.3.111.2.802.1.1.4.2.1.13current
ieee8021QBridgeCVlanPortGroup
OBJECT-GROUP
Objects used to create/delete customer VLAN ports.
1.3.111.2.802.1.1.4.2.1.14current
ieee8021QBridgeVIDXGroup
OBJECT-GROUP
Ingress or Ingress/Egress VID translation for individual ports.
1.3.111.2.802.1.1.4.2.1.15current
ieee8021QBridgeEgressVIDXGroup
OBJECT-GROUP
Egress VID translation for individual ports.
1.3.111.2.802.1.1.4.2.1.16deprecated
ieee8021QBridgeEgressVIDXV2Group
OBJECT-GROUP
Egress VID translation for individual ports.
1.3.111.2.802.1.1.4.2.1.17current
ieee8021QBridgeCompliance
MODULE-COMPLIANCE
The compliance statement for device support of Virtual LAN Bridge services.
1.3.111.2.802.1.1.4.2.2.1deprecated
ieee8021QBridgeComplianceV2
MODULE-COMPLIANCE
The compliance statement for device support of Virtual LAN Bridge services.
1.3.111.2.802.1.1.4.2.2.2current