IEEE8021-PBBTE-MIB
- Registered at
- 1.3.111.2.802.1.1.10
- Last updated
- 2022-11-08 00:00
- Organization
- IEEE 802.1 Working Group
- Revisions
- 2022-11-08 00:00, 2018-07-01 00:00, 2014-12-15 00:00, 2011-02-27 00:00, 2008-11-18 00:00
- Namespace
- standard
- Source file
IEEE8021-PBBTE-MIB- Digest
sha256:70b55bf2243a0254132f0cfa012aa0bb0d1d844da5527f37cdadd3dc947972b4
Description
Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q-2022. Copyright (C) IEEE (2022). This version of this MIB module is part of IEEE Std 802.1Q; see that standard for full legal notices.
Contact
WG-URL: http://www.ieee802.org/1/ WG-EMail: stds-802-1-l@ieee.org Contact: IEEE 802.1 Working Group Chair Postal: C/O IEEE 802.1 Working Group IEEE Standards Association 445 Hoes Lane Piscataway, NJ 08854 USA E-mail: stds-802-1-chairs@ieee.org
Imports
| From | Symbols |
|---|---|
| IEEE8021-BRIDGE-MIB | ieee8021BridgeBaseComponentId |
| IEEE8021-Q-BRIDGE-MIB | ieee8021QBridgeVlanCurrentComponentId |
| IEEE8021-TC-MIB | IEEE8021BridgePortNumber, IEEE8021PbbComponentIdentifier, IEEE8021PbbServiceIdentifier, IEEE8021PbbTeEsp, IEEE8021PbbTeProtectionGroupActiveRequests, IEEE8021PbbTeProtectionGroupConfigAdmin, IEEE8021PbbTeProtectionGroupId, IEEE8021PbbTeTSidId, IEEE8021VlanIndexOrWildcard, ieee802dot1mibs |
| Q-BRIDGE-MIB | PortList |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, StorageType, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB IANAifType-MIB IEEE8021-BRIDGE-MIB IEEE8021-PBBTE-MIB IEEE8021-Q-BRIDGE-MIB IEEE8021-TC-MIB IF-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ieee8021PbbTeNotifications OBJECT-IDENTITY | 1.3.111.2.802.1.1.10.0 | |||
| ieee8021PbbTeObjects OBJECT-IDENTITY | 1.3.111.2.802.1.1.10.1 | |||
| ieee8021PbbTeProtectionGroupListTable OBJECT-TYPE The PBB-TE Protection group list table. Each entry in this table corresponds to a configured PBB-TE Protection Group configured on the B-Component of an IB-BEB. | 1.3.111.2.802.1.1.10.1.1 | not-accessible | current | |
| ieee8021PbbTeProtectionGroupListEntry OBJECT-TYPE The PBB-TE protection group list table entry. Note that the component ID must refer to an B component | 1.3.111.2.802.1.1.10.1.1.1 | not-accessible | current | |
| ieee8021PbbTeProtectionGroupListGroupId OBJECT-TYPE The unique identifier for the protection group. | 1.3.111.2.802.1.1.10.1.1.1.1 | IEEE8021PbbTeProtectionGroupId | not-accessible | current |
| ieee8021PbbTeProtectionGroupListMD OBJECT-TYPE This refers to the Maintenance Domain that qualifies the WorkingMA and ProtectionMA columns of this table. The MD index in this column must hold a value that matches the in the dot1agCfmStackMdIndex in the dot1agCfmStackTable for the corresponding WorkingMA and ProtectionMA columns of this table. This correspondence must hold for the RowStatus of this row to be set to Active. Furthermore, this column may not be modified while the RowStatus for this row is Active | 1.3.111.2.802.1.1.10.1.1.1.2 | Unsigned32 | read-create | current |
| ieee8021PbbTeProtectionGroupListWorkingMA OBJECT-TYPE This refers to the Maintenance Association that refers to the PBB-TE MA that corresponds to the group's working entity. The MA index in this column must hold a value that is the value of dot1agCfmStackMaIndex column for some entry in the dot1agCfmStackTable before the RowStatus for this row can be set to Active. Furthermore, this column may not be modified when the RowStatus for this row is Active. | 1.3.111.2.802.1.1.10.1.1.1.3 | Unsigned32 | read-create | current |
| ieee8021PbbTeProtectionGroupListProtectionMA OBJECT-TYPE This refers to the Maintenance Association that refers to the PBB-TE MA that corresponds to the group's protection entity. The MA index in this column must hold a value that is the value of dot1agCfmStackMaIndex column for some entry in the dot1agCfmStackTable before the RowStatus for this row can be set to Active. Furthermore, this column may not be modified when the RowStatus for this row is Active. | 1.3.111.2.802.1.1.10.1.1.1.4 | Unsigned32 | read-create | current |
| ieee8021PbbTeProtectionGroupListStorageType OBJECT-TYPE This object indicates the persistence of this entry. All read-create columns must be writable if this column is set to permanent. | 1.3.111.2.802.1.1.10.1.1.1.5 | StorageType | read-create | current |
| ieee8021PbbTeProtectionGroupListRowStatus OBJECT-TYPE The status of this row. The writable columns in a row cannot be changed if the row is active. The PbbTeProtectionGroupListWorkingMA, and PbbTeProtectionGroupListProtectionMA columns must be specified before the row can be activated. | 1.3.111.2.802.1.1.10.1.1.1.6 | RowStatus | read-create | current |
| ieee8021PbbTeMASharedGroupTable OBJECT-TYPE This table contains references to all protection groups that share a working or protection entity with a given protection group. | 1.3.111.2.802.1.1.10.1.2 | not-accessible | current | |
| ieee8021PbbTeMASharedGroupEntry OBJECT-TYPE The ieee801PbbTeMASharedGroupEntry table. The table is indexed by protection group and by a simple integer. The table lists all protection groups that load share with that group. | 1.3.111.2.802.1.1.10.1.2.1 | not-accessible | current | |
| ieee8021PbbTeMASharedGroupSubIndex OBJECT-TYPE A simple integer to distinguish the members of the set of MAs that comprise the set of load sharing MAs for the specified protection group. | 1.3.111.2.802.1.1.10.1.2.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| ieee8021PbbTeMASharedGroupId OBJECT-TYPE This column holds the group id of a protection group that shares a working or protection group with the group whose index is the first index of this row. | 1.3.111.2.802.1.1.10.1.2.1.2 | IEEE8021PbbTeProtectionGroupId | read-only | current |
| ieee8021PbbTeTesiTable OBJECT-TYPE The PBB-TE TESI table contains information for each TE Service Instance known to a system. | 1.3.111.2.802.1.1.10.1.3 | not-accessible | current | |
| ieee8021PbbTeTesiEntry OBJECT-TYPE The PBB-TE TESI entry. Each entry maps a TESI to a component and CBP. | 1.3.111.2.802.1.1.10.1.3.1 | not-accessible | current | |
| ieee8021PbbTeTesiId OBJECT-TYPE This is the unique identifier for a PBB-TE TE-SID. | 1.3.111.2.802.1.1.10.1.3.1.1 | IEEE8021PbbTeTSidId | not-accessible | current |
| ieee8021PbbTeTesiComponent OBJECT-TYPE This is the component upon which the Bridge Port of the TESI is located. | 1.3.111.2.802.1.1.10.1.3.1.2 | IEEE8021PbbComponentIdentifier | read-create | current |
| ieee8021PbbTeTesiBridgePort OBJECT-TYPE This is the Bridge Port of the TESI. | 1.3.111.2.802.1.1.10.1.3.1.3 | IEEE8021BridgePortNumber | read-create | current |
| ieee8021PbbTeTesiStorageType OBJECT-TYPE This object indicates the persistence of this entry. All read-crate columns must be writable for rows whose StorageType is permanaent. | 1.3.111.2.802.1.1.10.1.3.1.4 | StorageType | read-create | current |
| ieee8021PbbTeTesiRowStatus OBJECT-TYPE This column holds the status for this row. When the status is active, no columns of this table may be modified. All columns must have a valid value before the row can be activated. | 1.3.111.2.802.1.1.10.1.3.1.5 | RowStatus | read-create | current |
| ieee8021PbbTeTeSiEspTable OBJECT-TYPE The PBB-TE TE-SID table contains information for each TE service instance known to a system. | 1.3.111.2.802.1.1.10.1.4 | not-accessible | current | |
| ieee8021PbbTeTeSiEspEntry OBJECT-TYPE The PBB-TE TE-SID entry. Each entry refers to a TE Service Instance by identifier and contains information about one of the ESPs that comprise this TE Service Instance. | 1.3.111.2.802.1.1.10.1.4.1 | not-accessible | current | |
| ieee8021PbbTeTeSiEspEspIndex OBJECT-TYPE This is an identifier, of local significance to a particular PBB-TE TE-SID that is used to index all of the ESPs associated with the TE-SID. | 1.3.111.2.802.1.1.10.1.4.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| ieee8021PbbTeTeSiEspEsp OBJECT-TYPE This column holds the ESP identifier for one of the Ethernet Switched Paths that define the TE service instance. | 1.3.111.2.802.1.1.10.1.4.1.2 | IEEE8021PbbTeEsp | read-create | current |
| ieee8021PbbTeTeSiEspStorageType OBJECT-TYPE This object indicates the persistence of this entry. All read-create columns must be writable for permanent rows. | 1.3.111.2.802.1.1.10.1.4.1.3 | StorageType | read-create | current |
| ieee8021PbbTeTeSiEspRowStatus OBJECT-TYPE This column holds the status for this row. When the status is active, no columns of this table may be modified. All columns must have a valid value before the row can be activated. | 1.3.111.2.802.1.1.10.1.4.1.4 | RowStatus | read-create | current |
| ieee8021PbbTeProtectionGroupConfigTable OBJECT-TYPE The PBB-TE Protection group config table contains configuration and status information for each configuration group configured in the system. Entries in this table are created implicitly by the creation of entries in the ieee8021PbbTeProtectionGroupListTable table. | 1.3.111.2.802.1.1.10.1.5 | not-accessible | current | |
| ieee8021PbbTeProtectionGroupConfigEntry OBJECT-TYPE The protection group configuration table entry. Rows are created in this table implicitly when a row is added to the ieee8021PbbTeProtectionGroupListTable. | 1.3.111.2.802.1.1.10.1.5.1 | not-accessible | current | |
| ieee8021PbbTeProtectionGroupConfigState OBJECT-TYPE This column indicates the current state of the protection switching state machine for a protection group. | 1.3.111.2.802.1.1.10.1.5.1.1 | INTEGER {workingPath(1), protectionPat(2), waitToRestore(3), protAdmin(4)} | read-only | current |
| ieee8021PbbTeProtectionGroupConfigCommandStatus OBJECT-TYPE This column indicates the status of administrative commands within the protection group. It reflects the current operational administrative command being acted upon by the protection group. | 1.3.111.2.802.1.1.10.1.5.1.2 | IEEE8021PbbTeProtectionGroupConfigAdmin | read-only | current |
| ieee8021PbbTeProtectionGroupConfigCommandLast OBJECT-TYPE This column indicates the last attempted administrative command applied to the protection group. It is changed whenever a write is made to the CommandAdmin column of this table and is a record of the last attempted administrative operation. | 1.3.111.2.802.1.1.10.1.5.1.3 | IEEE8021PbbTeProtectionGroupConfigAdmin | read-only | current |
| ieee8021PbbTeProtectionGroupConfigCommandAdmin OBJECT-TYPE This column is used by the operator to request that the protection group state machine perform some administrative operation. The operator requests a command by writing the command value to this column. The state machine indicates the command that it is performing by setting the value of the CommandStatus column of this table. This column always reads back as clear(1). | 1.3.111.2.802.1.1.10.1.5.1.4 | IEEE8021PbbTeProtectionGroupConfigAdmin | read-create | current |
| ieee8021PbbTeProtectionGroupConfigActiveRequests OBJECT-TYPE This column shows the status of active requests within the TE protection group. | 1.3.111.2.802.1.1.10.1.5.1.5 | IEEE8021PbbTeProtectionGroupActiveRequests | read-only | current |
| ieee8021PbbTeProtectionGroupConfigWTR OBJECT-TYPE This column is used to configure the wait-to-restore timer for the protection group operation. The timer may be configured in steps of 1 minute between 5 and 12 minutes, the default being 5. Additionally, the value 0 is used to indicate that the protection group is to operate non-revertively. | 1.3.111.2.802.1.1.10.1.5.1.6 | Unsigned32 (0 | 5..12) | read-create | current |
| ieee8021PbbTeProtectionGroupConfigHoldOff OBJECT-TYPE This column is used to configure the hold off timer. The purpose is to allow a service layer protection mechanism to have a chance to fix the problem before switching at the client layer, or to allow an upstream protected domain to switch before a downstream domain. The hold off timer has a period of from 0 to 10 seconds, the default being 0, with a 100ms granularity. | 1.3.111.2.802.1.1.10.1.5.1.7 | Unsigned32 (0..100) | read-create | current |
| ieee8021PbbTeProtectionGroupConfigNotifyEnable OBJECT-TYPE This column is used to enable or disable transmission of ieee8021PbbTeProtectionGroupAdminFailure notifications. These notifications are generated whenever an administrative command cannot be performed by the protection group. | 1.3.111.2.802.1.1.10.1.5.1.8 | TruthValue | read-create | current |
| ieee8021PbbTeProtectionGroupConfigStorageType OBJECT-TYPE This object indicates the persistence of this entry. For permanent objects the ieee8021PbbTeProtectionGroupConfigCommandAdmin column must be writable. | 1.3.111.2.802.1.1.10.1.5.1.9 | StorageType | read-create | current |
| ieee8021PbbTeProtectionGroupISidTable OBJECT-TYPE This table contains entries for each I-SID that is transported over TE-SIDs that belong to protection groups. Each I-SID maps to a single protection group. | 1.3.111.2.802.1.1.10.1.6 | not-accessible | current | |
| ieee8021PbbTeProtectionGroupISidEntry OBJECT-TYPE The ieee8021PbbTeProtectionGroupISidTable entry. | 1.3.111.2.802.1.1.10.1.6.1 | not-accessible | current | |
| ieee8021PbbTeProtectionGroupISidIndex OBJECT-TYPE This is the I-Sid that is to be mapped to a protection group. | 1.3.111.2.802.1.1.10.1.6.1.1 | IEEE8021PbbServiceIdentifier | not-accessible | current |
| ieee8021PbbTeProtectionGroupISidComponentId OBJECT-TYPE This column qualifies the GroupId column to a particular component. | 1.3.111.2.802.1.1.10.1.6.1.2 | IEEE8021PbbComponentIdentifier | read-create | current |
| ieee8021PbbTeProtectionGroupISidGroupId OBJECT-TYPE This column contains the Id of the protection group used to transport the data belonging to the service identified by the I-SID value specified in the ISidIndex column of this table. | 1.3.111.2.802.1.1.10.1.6.1.3 | IEEE8021PbbTeProtectionGroupId | read-create | current |
| ieee8021PbbTeProtectionGroupISidStorageType OBJECT-TYPE This object indicates the persistence of this entry. | 1.3.111.2.802.1.1.10.1.6.1.4 | StorageType | read-create | current |
| ieee8021PbbTeProtectionGroupISidRowStatus OBJECT-TYPE This column contains the status for this row. Once active none of the columns in the row may be modified. All columns must be specified when creating the row. | 1.3.111.2.802.1.1.10.1.6.1.5 | RowStatus | read-create | current |
| ieee8021PbbTeBridgeStaticForwardAnyUnicastTable OBJECT-TYPE A table containing forwarding information for each vlan specifying the set of ports to which forwarding of unicast addressed frames for which no more specific forwarding information applies. This is configured statically by management. | 1.3.111.2.802.1.1.10.1.7 | not-accessible | current | |
| ieee8021PbbTeBridgeStaticForwardAnyUnicastEntry OBJECT-TYPE Forwarding information for a VLAN, specifying the set of ports to which forwarding of unicast addressed frames for which no more specific forwarding information applies. The EgressPorts and ForbiddenPorts PortList objects, together, implement the PortMap control element listed in IEEE Std 802.1Q 8.8.1.c. | 1.3.111.2.802.1.1.10.1.7.1 | not-accessible | current | |
| ieee8021PbbTeBridgeStaticForwardAnyUnicastVlanIndex OBJECT-TYPE The VLAN-ID or other identifier referring to the VLAN to which this static filtering entry applies. | 1.3.111.2.802.1.1.10.1.7.1.1 | IEEE8021VlanIndexOrWildcard | not-accessible | current |
| ieee8021PbbTeBridgeStaticForwardAnyUnicastEgressPorts OBJECT-TYPE The complete set of ports to which a unicast addressed frame is to be forwarded. This value is persistent and will be restored upon system reboot. A port may not be added to this set if it is already a member of ieee8021PbbTeBridgeStaticForwardAnyUnicastForbiddenPorts. The default value is a string of zeros of appropriate length. The value of this object MUST be retained across reinitialization of the management system. | 1.3.111.2.802.1.1.10.1.7.1.2 | PortList | read-create | current |
| ieee8021PbbTeBridgeStaticForwardAnyUnicastForbiddenPorts OBJECT-TYPE The complete set of ports to which a unicast addressed frame is to be filtered. This value is persistent and will be restored upon system reboot. A port may not be added to this set if it is already a member of ieee8021PbbTeBridgeStaticForwardAnyUnicastEgress. The default value is a string of zeros of appropriate length. The value of this object MUST be retained across reinitialization of the management system. | 1.3.111.2.802.1.1.10.1.7.1.3 | PortList | read-create | current |
| ieee8021PbbTeBridgeStaticForwardAnyUnicastStorageType OBJECT-TYPE The storage type for this row. All read-create columns must be writable for permanent entries. | 1.3.111.2.802.1.1.10.1.7.1.4 | StorageType | read-create | current |
| ieee8021PbbTeBridgeStaticForwardAnyUnicastRowStatus OBJECT-TYPE This column contains the status for this row. | 1.3.111.2.802.1.1.10.1.7.1.5 | RowStatus | read-create | current |
| ieee8021PbbTeConformance OBJECT-IDENTITY | 1.3.111.2.802.1.1.10.2 | |||
| ieee8021PbbTeCompliances OBJECT-IDENTITY | 1.3.111.2.802.1.1.10.2.1 | |||
| ieee8021PbbTeGroups OBJECT-IDENTITY | 1.3.111.2.802.1.1.10.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| ieee8021PbbTeProtectionGroupAdminFailure NOTIFICATION-TYPE A protection group generates this notification whenever an administrative command cannot be executed by the protection state machine. For example, a requested manual switch cannot be performed because of a signal failure condition. The management entity receiving the notification can identify the system from the network source address of the notification and can identify the protection group by the indices of the OID of the ieee8021PbbTeProtectionGroupConfigState variable in the notification: ieee8021BridgeBaseComponentId - Identifies the component on the Bridge where the protection group is configured. ieee8021PbbTeProtectionGroupListGroupId - The id of the protection group. | 1.3.111.2.802.1.1.10.0.1 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| ieee8021PbbTeCompliance MODULE-COMPLIANCE The compliance statement for support of the PBB-TE MIB module. | 1.3.111.2.802.1.1.10.2.1.1 | current |
| ieee8021PbbTeGroupListGroup OBJECT-GROUP Objects for the GroupList group. | 1.3.111.2.802.1.1.10.2.2.1 | current |
| ieee8021PbbTeMASharedGroup OBJECT-GROUP Objects for the MA Load Sharing Table Group. | 1.3.111.2.802.1.1.10.2.2.2 | current |
| ieee8021PbbTeTesiGroup OBJECT-GROUP Objects for the TE SI group | 1.3.111.2.802.1.1.10.2.2.3 | current |
| ieee8021PbbTeSiEspGroup OBJECT-GROUP Objects for the TESI ESP group. | 1.3.111.2.802.1.1.10.2.2.4 | current |
| ieee8021PbbTeProtectionConfigManGroup OBJECT-GROUP Objects for the PbbTeConfiguration group. | 1.3.111.2.802.1.1.10.2.2.5 | current |
| ieee8021PbbTeProtectionConfigOptGroup OBJECT-GROUP Objects for the PbbTeConfiguration group. | 1.3.111.2.802.1.1.10.2.2.6 | current |
| ieee8021PbbTeProtectionGroupISidGroup OBJECT-GROUP Objects for the ieee8021PbbTeProtectionGroupISidGroup group. | 1.3.111.2.802.1.1.10.2.2.7 | current |
| ieee8021PbbTeFdbGroup OBJECT-GROUP Fdb extension objects group | 1.3.111.2.802.1.1.10.2.2.8 | current |
| ieee8021PbbTeNotificationsGroup NOTIFICATION-GROUP Objects for the notifications group. | 1.3.111.2.802.1.1.10.2.2.9 | current |