MIBs Depot

IBM-6611-APPN-MIB

Registered at
1.3.6.1.4.1.2
Namespace
standard
Source file
IBM-6611-APPN-MIB
Digest
sha256:584018c833ca840d9464d9a404dce4febe1fcd5ba30f4f46738174ede01fec49

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Gauge32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, enterprises, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IBM-6611-APPN-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Under this module's arcs

Where the registration tree carries on below this module.

ArcNameModule
1.3.6.1.4.1.2.2ibmResearchIBM-MIB
1.3.6.1.4.1.2.3ibmAgentsBLADE-MIB
1.3.6.1.4.1.2.5ibmArchitectureIBM-MIB
1.3.6.1.4.1.2.6ibmProd
1.3.6.1.4.1.2.11ibmAgentCapsIBMTCPIPMVS-MIB

Objects

NameOIDSyntaxAccessStatus
ibm
OBJECT-IDENTITY
1.3.6.1.4.1.2
ibmProd
OBJECT-IDENTITY
1.3.6.1.4.1.2.6
ibm6611
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.2
ibmappn
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.2.13
ibmappnNode
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.2.13.1
ibmappnGeneralInfoAndCaps
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.2.13.1.1
ibmappnNodeCpName
OBJECT-TYPE
Administratively-assigned network name for this node in the format NETID.CPNAME.
1.3.6.1.4.1.2.6.2.13.1.1.1DisplayString (SIZE(3..17))read-onlymandatory
ibmappnNodeNetid
OBJECT-TYPE
Administratively-assigned APPN network identification, which can be from one to eight characters. This ID is used with the control point name to create a fully-qualified control point name.
1.3.6.1.4.1.2.6.2.13.1.1.2DisplayString (SIZE(1..8))read-onlymandatory
ibmappnNodeBlockNum
OBJECT-TYPE
The block number is the first three digits of the node_id. These 3 hexadecimal digits identify the product and are not configurable.
1.3.6.1.4.1.2.6.2.13.1.1.3DisplayString (SIZE(3))read-onlymandatory
ibmappnNodeIdNum
OBJECT-TYPE
The ID number is the last 5 digits of the node_id. These 5 hexadecimal digits are administratively defined and combined with the 3 digit block number form the node_id. This node_id is used to identify the local node and is include in APPN alerts as well as being included in XIDs. A unique value is required for connections to SNA sub-area.
1.3.6.1.4.1.2.6.2.13.1.1.4DisplayString (SIZE(5))read-onlymandatory
ibmappnNodeType
OBJECT-TYPE
Type of APPN node, either network, len, or end node.
1.3.6.1.4.1.2.6.2.13.1.1.5INTEGER {networkNode(1), endNode(2), len(4)}read-onlymandatory
ibmappnNodeUpTime
OBJECT-TYPE
Time (in hundredths of a second) since this APPN node was initialized.
1.3.6.1.4.1.2.6.2.13.1.1.6TimeTicksread-onlymandatory
ibmappnNodeNegotLs
OBJECT-TYPE
Indicates whether this node supports negotiable link stations.
1.3.6.1.4.1.2.6.2.13.1.1.7INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNodeSegReasm
OBJECT-TYPE
Indicates whether this node supports segment reassembly. This is only supported when segment generation is also supported.
1.3.6.1.4.1.2.6.2.13.1.1.8INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNodeBindReasm
OBJECT-TYPE
Indicates whether this node supports Bind segment reassembly. This will only be supported when Bind segment generation is also supported.
1.3.6.1.4.1.2.6.2.13.1.1.9INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNodeParallelTg
OBJECT-TYPE
Indicates whether this node supports parallel TGs.
1.3.6.1.4.1.2.6.2.13.1.1.10INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNodeService
OBJECT-TYPE
Indicates whether this node allows call-in from nodes not defined locally.
1.3.6.1.4.1.2.6.2.13.1.1.11INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNodeAdaptiveBindPacing
OBJECT-TYPE
Indicates whether this node supports adaptive bind pacing.
1.3.6.1.4.1.2.6.2.13.1.1.12INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNnUniqueInfoAndCaps
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.2.13.1.2
ibmappnNodeNnRcvRegChar
OBJECT-TYPE
Indicates whether this node supports receiving registered characteristics.
1.3.6.1.4.1.2.6.2.13.1.2.1INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNodeNnGateway
OBJECT-TYPE
Indicates whether this is a gateway node.
1.3.6.1.4.1.2.6.2.13.1.2.2INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNodeNnCentralDirectory
OBJECT-TYPE
Indicates whether this node supports central directory cache.
1.3.6.1.4.1.2.6.2.13.1.2.3INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNodeNnTreeCache
OBJECT-TYPE
Indicates whether this node supports route tree cache.
1.3.6.1.4.1.2.6.2.13.1.2.4INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNodeNnTreeUpdate
OBJECT-TYPE
Indicates whether this node supports incremental_tree_update, which is only supported when tree caching is supported.
1.3.6.1.4.1.2.6.2.13.1.2.5INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNodeNnRouteAddResist
OBJECT-TYPE
Route addition resistance is a value that indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, is used in route computation. The lower the value, the more desirable the node is for intermediate routing.
1.3.6.1.4.1.2.6.2.13.1.2.6INTEGERread-onlymandatory
ibmappnNodeNnIsr
OBJECT-TYPE
Indicates whether the node supports intermediate session routing.
1.3.6.1.4.1.2.6.2.13.1.2.7INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNodeNnFrsn
OBJECT-TYPE
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This object is the last FRSN sent in a topology update to adjacent network nodes.
1.3.6.1.4.1.2.6.2.13.1.2.8INTEGER (0..65535)read-onlymandatory
ibmappnEnUniqueCaps
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.2.13.1.3
ibmappnNodeEnSegGen
OBJECT-TYPE
Indicates whether this end node supports segment generation.
1.3.6.1.4.1.2.6.2.13.1.3.1INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNodeEnModeCosMap
OBJECT-TYPE
Indicates whether this end node supports mode name to COS name mapping.
1.3.6.1.4.1.2.6.2.13.1.3.2INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNodeEnLocateCdinit
OBJECT-TYPE
Indicates whether this end node supports Locate Cdinit.
1.3.6.1.4.1.2.6.2.13.1.3.3INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNodeEnSendRegNames
OBJECT-TYPE
Indicates whether the node will register its LUs with the adjacent serving network node: NO - do not register names YES - register names
1.3.6.1.4.1.2.6.2.13.1.3.4INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNodeEnSendRegChar
OBJECT-TYPE
Indicates whether this node supports send register characteristics, which is only supported when send registered names is also supported.
1.3.6.1.4.1.2.6.2.13.1.3.5INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnPortInformation
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.2.13.1.4
ibmappnNodePortTable
OBJECT-TYPE
The Port table describes the configuration and current status of the ports used by APPN. The type of DLC is included in this table as a pointer to the DLC port specific tables.
1.3.6.1.4.1.2.6.2.13.1.4.1not-accessiblemandatory
ibmappnNodePortEntry
OBJECT-TYPE
The Port Name is used as the index to this table.
1.3.6.1.4.1.2.6.2.13.1.4.1.1not-accessiblemandatory
ibmappnNodePortName
OBJECT-TYPE
Administratively-assigned name for this APPN port. The name can be from one to eight characters.
1.3.6.1.4.1.2.6.2.13.1.4.1.1.1DisplayString (SIZE(1..8))read-onlymandatory
ibmappnNodePortState
OBJECT-TYPE
Indicates the current state of this port.
1.3.6.1.4.1.2.6.2.13.1.4.1.1.2INTEGER {inactive(1), pendactive(2), active(3), pendinact(4)}read-writemandatory
ibmappnNodePortDlcType
OBJECT-TYPE
The type of DLC interface, distinguished according to the protocol immediately 'below' this layer.
1.3.6.1.4.1.2.6.2.13.1.4.1.1.3INTEGER {other(1), sdlc(2), dls(3), socket(4), ethernet(5), tokenRing(6)}read-onlymandatory
ibmappnNodePortPortType
OBJECT-TYPE
Identifies the type of line used by this port.
1.3.6.1.4.1.2.6.2.13.1.4.1.1.4INTEGER {leased(1), switched(2), sharedAccessFacilities(3)}read-onlymandatory
ibmappnNodePortSIMRIM
OBJECT-TYPE
Indicates whether Set Initialization Mode (SIM) and Receive Initialization Mode (RIM) are supported.
1.3.6.1.4.1.2.6.2.13.1.4.1.1.5INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNodePortLsRole
OBJECT-TYPE
Initial role for LSs activated through this port, where 'abm' indicates asynchronous balance mode.
1.3.6.1.4.1.2.6.2.13.1.4.1.1.6INTEGER {primary(1), secondary(2), negotiable(3), abm(4)}read-onlymandatory
ibmappnNodePortMaxRcvBtuSize
OBJECT-TYPE
Maximum Basic Transmission Size (BTU) that a link station on this port can receive.
1.3.6.1.4.1.2.6.2.13.1.4.1.1.7INTEGERread-onlymandatory
ibmappnNodePortMaxIframeWindow
OBJECT-TYPE
Maximum number of I-frames that can be received by the XID sender before an acknowledgement is received.
1.3.6.1.4.1.2.6.2.13.1.4.1.1.8INTEGERread-onlymandatory
ibmappnNodePortDefLsGoodXids
OBJECT-TYPE
The total number of successfull XIDs that have occurred on all defined link stations on this port since the last time this port was started.
1.3.6.1.4.1.2.6.2.13.1.4.1.1.9Counterread-onlymandatory
ibmappnNodePortDefLsBadXids
OBJECT-TYPE
The total number of unsuccessfull XIDs that have occurred on all defined link stations on this port since the last time this port was started.
1.3.6.1.4.1.2.6.2.13.1.4.1.1.10Counterread-onlymandatory
ibmappnNodePortDynLsGoodXids
OBJECT-TYPE
The total number of successfull XIDs that have occurred on all dynamic link stations on this port since the last time this port was started.
1.3.6.1.4.1.2.6.2.13.1.4.1.1.11Counterread-onlymandatory
ibmappnNodePortDynLsBadXids
OBJECT-TYPE
The total number of unsuccessfull XIDs that have occurred on all dynamic link stations on this port since the last time this port was started.
1.3.6.1.4.1.2.6.2.13.1.4.1.1.12Counterread-onlymandatory
ibmappnNodePortSpecific
OBJECT-TYPE
Identifies the port specific OBJECT IDENTIFIER that can provide additional information.
1.3.6.1.4.1.2.6.2.13.1.4.1.1.13OBJECT IDENTIFIERread-onlymandatory
ibmappnNodePortIpTable
OBJECT-TYPE
Port table (TCP/IP specific).
1.3.6.1.4.1.2.6.2.13.1.4.2not-accessiblemandatory
ibmappnNodePortIpEntry
OBJECT-TYPE
The IP Name is used as the index to this table.
1.3.6.1.4.1.2.6.2.13.1.4.2.1not-accessiblemandatory
ibmappnNodePortIpName
OBJECT-TYPE
Administratively-assigned name for this APPN port. The name can be from one to eight characters.
1.3.6.1.4.1.2.6.2.13.1.4.2.1.1DisplayString (SIZE(1..8))read-onlymandatory
ibmappnNodePortIpPortNum
OBJECT-TYPE
Local TCP/IP port number.
1.3.6.1.4.1.2.6.2.13.1.4.2.1.2INTEGERread-onlymandatory
ibmappnNodePortDlsTable
OBJECT-TYPE
Port table (DLS specific).
1.3.6.1.4.1.2.6.2.13.1.4.3not-accessiblemandatory
ibmappnNodePortDlsEntry
OBJECT-TYPE
The DLS Name is used as the index to this table.
1.3.6.1.4.1.2.6.2.13.1.4.3.1not-accessiblemandatory
ibmappnNodePortDlsName
OBJECT-TYPE
Administratively-assigned name for this APPN DLS port. The name can be from one to eight characters.
1.3.6.1.4.1.2.6.2.13.1.4.3.1.1DisplayString (SIZE(1..8))read-onlymandatory
ibmappnNodePortDlsMac
OBJECT-TYPE
Local DLS MAC address.
1.3.6.1.4.1.2.6.2.13.1.4.3.1.2OCTET STRING (SIZE(6))read-onlymandatory
ibmappnNodePortDlsSap
OBJECT-TYPE
Local DLS Sap address.
1.3.6.1.4.1.2.6.2.13.1.4.3.1.3OCTET STRING (SIZE(1))read-onlymandatory
ibmappnNodePortTrTable
OBJECT-TYPE
Port table (Token Ring specific).
1.3.6.1.4.1.2.6.2.13.1.4.4not-accessiblemandatory
ibmappnNodePortTrEntry
OBJECT-TYPE
The TR Name is used as the index to this table.
1.3.6.1.4.1.2.6.2.13.1.4.4.1not-accessiblemandatory
ibmappnNodePortTrName
OBJECT-TYPE
Administratively-assigned name for this APPN port. The name can be from one to eight characters.
1.3.6.1.4.1.2.6.2.13.1.4.4.1.1DisplayString (SIZE(1..8))read-onlymandatory
ibmappnNodePortTrMac
OBJECT-TYPE
Local Token Ring MAC address.
1.3.6.1.4.1.2.6.2.13.1.4.4.1.2OCTET STRING (SIZE(6))read-onlymandatory
ibmappnNodePortTrSap
OBJECT-TYPE
Local Token Ring Sap address.
1.3.6.1.4.1.2.6.2.13.1.4.4.1.3OCTET STRING (SIZE(1))read-onlymandatory
ibmappnNodePortDlcTraceTable
OBJECT-TYPE
Port table generic DLC trace table.
1.3.6.1.4.1.2.6.2.13.1.4.5not-accessiblemandatory
ibmappnNodePortDlcTraceEntry
OBJECT-TYPE
The Port name and a dynamic integer are the index to this table.
1.3.6.1.4.1.2.6.2.13.1.4.5.1not-accessiblemandatory
ibmappnNodePortDlcTracPortName
OBJECT-TYPE
The Port name associated with this this trace table entry.
1.3.6.1.4.1.2.6.2.13.1.4.5.1.1DisplayStringread-onlymandatory
ibmappnNodePortDlcTracIndex
OBJECT-TYPE
This index value is updated every time a new trace entry is created which provides a means to retrieve only the updated entries and also provides a simple method of correlating the entries. The table will wrap when the table is full, which will result in previous entries being written over. The mangement station can over come this by retrieving the table using this index to retrieve only the new table entries.
1.3.6.1.4.1.2.6.2.13.1.4.5.1.2INTEGERread-onlymandatory
ibmappnNodePortDlcTracDlcType
OBJECT-TYPE
The type of DLC interface, distinguished according to the protocol immediately 'below' this layer.
1.3.6.1.4.1.2.6.2.13.1.4.5.1.3INTEGER {other(1), sdlc(2), dls(3), socket(4), ethernet(5), tokenRing(6)}read-onlymandatory
ibmappnNodePortDlcTracLocalAddr
OBJECT-TYPE
Local address in format described below: other = free form DisplayString ip = ld. ld. ld. ld / 2d tr = lx: lx: lx: lx: lx: lx . lx dlsw = lx: lx: lx: lx: lx: lx . lx ethernet = lx: lx: lx: lx: lx: lx . lx
1.3.6.1.4.1.2.6.2.13.1.4.5.1.4DisplayStringread-onlymandatory
ibmappnNodePortDlcTracRemoteAddr
OBJECT-TYPE
Remote Address in the format described below: other = free form DisplayString ip = ld. ld. ld. ld / 2d tr = lx: lx: lx: lx: lx: lx . lx dlsw = lx: lx: lx: lx: lx: lx . lx ethernet = lx: lx: lx: lx: lx: lx . lx
1.3.6.1.4.1.2.6.2.13.1.4.5.1.5DisplayStringread-onlymandatory
ibmappnNodePortDlcTracMsgType
OBJECT-TYPE
Indicates the type of trace record entry
1.3.6.1.4.1.2.6.2.13.1.4.5.1.6INTEGER {other(1), unknown(2), request(3), confirm(4), indication(5), response(6)}read-onlymandatory
ibmappnNodePortDlcTracCmdType
OBJECT-TYPE
Indicates the command type of the trace entry.
1.3.6.1.4.1.2.6.2.13.1.4.5.1.7INTEGER {testFrame(1), respFrame(2), curFrame(3), icrFrame(4), respAck(5), dgrmFrame(6), xidFrame(7), contFrame(8), contedFrame(9), iFrame(10), enterBusy(12), exitBusy(13), haltFrame(14), lsHalted(15), restartLs(16), lsRestarted(17), netBioSnq(18), netBioSnr(19), gnetFrame(20), netdFrame(21), oobFrame(22), alterSap(23), testRsp(24), haltLsNow(25), testReq(26), ipTestFrame(2001), ipRespFrame(2002), ipCurFrame(2003), ipIcrFrame(2004), ipRespAck(2005), ipDgrmFrame(2006), ipXidFrame(2007), ipContFrame(2008), ipContedFrame(2009), ipIFrame(2010), ipEnterBusy(2012), ipExitBusy(2013), ipHaltFrame(2014), ipLsHalted(2015), ipRestartLs(2016), ipLsRestarted(2017), ipNetBioSnq(2018), ipNetBioSnr(2019), ipGnetFrame(2020), ipNetdFrame(2021), ipOobFrame(2022), ipAlterSap(2023), ipTestRsp(2024), ipHaltLsNow(2025), ipTestReq(2026), dlsIpm(4124), trTestFrame(6001), trRespFrame(6002), trCurFrame(6003), trIcrFrame(6004), trRespAck(6005), trDgrmFrame(6006), trXidFrame(6007), trContFrame(6008), trContedFrame(6009), trIFrame(6010), trEnterBusy(6012), trExitBusy(6013), trHaltFrame(6014), trLsHalted(6015), trRestartLs(6016), trLsRestarted(6017), trNetBioSnq(6018), trNetBioSnr(6019), trGnetFrame(6020), trNetdFrame(6021), trOobFrame(6022), trAlterSap(6023), trTestRsp(6024), trHaltLsNow(6025), trTestReq(6026)}read-onlymandatory
ibmappnNodePortDlcTracUseWan
OBJECT-TYPE
Indicates the type of connection of the trace entry. For example, token ring and ethernet ports will have useLan as connection. For the dls port, it could be either useWan if connection is across Wan via dls sessions, or useLan if connection is to a local attached LAN.
1.3.6.1.4.1.2.6.2.13.1.4.5.1.8INTEGER {other(1), notApplicable(2), useUnknown(3), useWan(4), useLan(5)}read-onlymandatory
ibmappnLinkStationInformation
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.2.13.1.5
ibmappnNodeLsTable
OBJECT-TYPE
This table contains detail information about the link station configuration and current status.
1.3.6.1.4.1.2.6.2.13.1.5.1not-accessiblemandatory
ibmappnNodeLsEntry
OBJECT-TYPE
This table is indexed by the link station name.
1.3.6.1.4.1.2.6.2.13.1.5.1.1not-accessiblemandatory
ibmappnNodeLsName
OBJECT-TYPE
Administratively-assigned name for the link station. The name can be from one to eight characters.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.1DisplayString (SIZE(1..8))read-onlymandatory
ibmappnNodeLsPortName
OBJECT-TYPE
Administratively-assigned name for the port. The name can be from one to eight characters.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.2DisplayString (SIZE(1..8))read-onlymandatory
ibmappnNodeLsDlcType
OBJECT-TYPE
The type of DLC interface, distinguished according to the protocol immediately 'below' this layer.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.3INTEGER {other(1), sdlc(2), dls(3), socket(4), ethernet(5), tokenRing(6)}read-onlymandatory
ibmappnNodeLsDynamic
OBJECT-TYPE
Identifies whether this resource is a dynamic link station. Dynamic link stations are created when adjacent nodes that have not been locally defined establish a connection with this node.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.4INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNodeLsState
OBJECT-TYPE
State of this link station.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.5INTEGER {inactive(1), pendactive(2), active(3), pendinact(4)}read-writemandatory
ibmappnNodeLsCpName
OBJECT-TYPE
Fully-qualified name of the adjacent node for this link station. The name can be from three to seventeen characters. Format is netid.cpname.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.6DisplayString (SIZE(3..17))read-onlymandatory
ibmappnNodeLsTgNum
OBJECT-TYPE
Number associated with the TG to this link station.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.7INTEGERread-onlymandatory
ibmappnNodeLsLimResource
OBJECT-TYPE
Indicates whether the link station is a limited resource. If it is, the TG is deactivated when there are no sessions.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.8INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNodeLsMigration
OBJECT-TYPE
Indicates whether this link station will be used for connections to down-level or migration partners.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.9INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNodeLsBlockNum
OBJECT-TYPE
The block number is the first three digits of the node_id. These 3 hexideimal digits identify the product and are not configurable.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.10DisplayString (SIZE(3))read-onlymandatory
ibmappnNodeLsIdNum
OBJECT-TYPE
The ID number is the last 5 digits of the node_id. These 5 hexadecimal digits are administratively defined and combined with the 3 digit block number form the node_id. This node_id is used to identify the local node and is include in APPN alerts as well as being included in XIDs. A unique value is required for connections to SNA sub-area.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.11DisplayString (SIZE(5))read-onlymandatory
ibmappnNodeLsCpCpSession
OBJECT-TYPE
Indicates whether CP-CP sessions are supported by this link station.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.12INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNodeLsTargetPacingCount
OBJECT-TYPE
Numeric value between 0 and 32767 inclusive indicating the desired pacing window size for BINDs on this TG. The number is significant only when fixed bind pacing is being performed.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.13INTEGERread-onlymandatory
ibmappnNodeLsMaxSendBtuSize
OBJECT-TYPE
Numeric value between 0 and 32767 inclusive indicating the desired number of bytes in a Basic Transmission Unit (BTU) that can be sent on this TG. This is an administratively assigned value.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.14INTEGERread-onlymandatory
ibmappnNodeLsEffCap
OBJECT-TYPE
The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 603,979,776. This is an administratively assigned value associated with the TG using this link station.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.15INTEGERread-onlymandatory
ibmappnNodeLsConnCost
OBJECT-TYPE
Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This is an administratively assigned value associated with the TG using this link station.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.16INTEGER (0..255)read-onlymandatory
ibmappnNodeLsByteCost
OBJECT-TYPE
Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with the TG using this link station.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.17INTEGER (0..255)read-onlymandatory
ibmappnNodeLsSecurity
OBJECT-TYPE
The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assigned value associated with the TG using this link station.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.18INTEGER {nonsecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192)}read-onlymandatory
ibmappnNodeLsDelay
OBJECT-TYPE
Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more common values enumerated. This is an administratively assigned value associated with the TG using this link station.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.19INTEGER {minimum(0), negligible(384), terrestrial(9216), packet(147456), long(294912), maximum(2013265920)}read-onlymandatory
ibmappnNodeLsUsr1
OBJECT-TYPE
First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.20INTEGER (0..255)read-onlymandatory
ibmappnNodeLsUsr2
OBJECT-TYPE
Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.21INTEGER (0..255)read-onlymandatory
ibmappnNodeLsUsr3
OBJECT-TYPE
Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.22INTEGER (0..255)read-onlymandatory
ibmappnNodeLsInXidBytes
OBJECT-TYPE
Number of XID bytes received.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.23Counterread-onlymandatory
ibmappnNodeLsInMsgBytes
OBJECT-TYPE
Number of message (I-frame) bytes received.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.24Counterread-onlymandatory
ibmappnNodeLsInXidFrames
OBJECT-TYPE
Number of XID frames received.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.25Counterread-onlymandatory
ibmappnNodeLsInMsgFrames
OBJECT-TYPE
Number of message (I-frame) frames received.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.26Counterread-onlymandatory
ibmappnNodeLsOutXidBytes
OBJECT-TYPE
Number of XID bytes sent.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.27Counterread-onlymandatory
ibmappnNodeLsOutMsgBytes
OBJECT-TYPE
Number of message (I-frame) bytes sent.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.28Counterread-onlymandatory
ibmappnNodeLsOutXidFrames
OBJECT-TYPE
Number of XID frames sent.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.29Counterread-onlymandatory
ibmappnNodeLsOutMsgFrames
OBJECT-TYPE
Number of message (I-frame) frames sent.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.30Counterread-onlymandatory
ibmappnNodeLsEchoRsps
OBJECT-TYPE
Number of responses returned from adjacent link station. A response should be returned for each test frame sent by this node. Test frames are sent to adjacent nodes periodically to verify connectivity and to measure that actual round trip time, that is the time the test frame is sent until the response is received.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.31Counterread-onlymandatory
ibmappnNodeLsCurrentDelay
OBJECT-TYPE
The time that it took for the last test signal to be sent and returned from this link station to the adjacent links station. This time is represented in milliseconds.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.32INTEGERread-onlymandatory
ibmappnNodeLsMaxDelay
OBJECT-TYPE
The longest time it took for a test signal to be sent and returned from this link station to the adjacent links station. This time is represented in milliseconds .
1.3.6.1.4.1.2.6.2.13.1.5.1.1.33INTEGERread-onlymandatory
ibmappnNodeLsMinDelay
OBJECT-TYPE
The shortest time it took for a test signal to be sent and returned from this link station to the adjacent links station. This time is represented in milliseconds.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.34INTEGERread-onlymandatory
ibmappnNodeLsMaxDelayTime
OBJECT-TYPE
The time (since system up in hundredth of seconds) when the longest delay occurred. This time can be used to identify when this high water mark occurred in relation to the last initialization of the APPN node.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.35TimeTicksread-onlymandatory
ibmappnNodeLsGoodXids
OBJECT-TYPE
The total number of successful XIDs that have occurred on this link station since the time it was started.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.36Counterread-onlymandatory
ibmappnNodeLsBadXids
OBJECT-TYPE
The total number of unsuccessful XIDs that have occurred on this link station since the time it was started.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.37Counterread-onlymandatory
ibmappnNodeLsSpecific
OBJECT-TYPE
Identifies the DLC specific OBJECT IDENTIFIER that can provide additional information.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.38OBJECT IDENTIFIERread-onlymandatory
ibmappnNodeLsSubState
OBJECT-TYPE
State of this link station.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.39INTEGER {inactive(1), sentReqOpnstn(2), pendXidExch(3), sentActAs(4), sentSetMode(5), active(6), sentDeactAsOrd(7), sentDiscOrd(8), sentDestroyTg(9), sentCreateTg(10), sentConnReq(11), pendRcvConnInd(12), pendSendConnRsp(13), sentConnRsp(14), pendDeact(15)}read-onlymandatory
ibmappnNodeLsStartTime
OBJECT-TYPE
The time (in hundredth of seconds) this link station has been active the last time since the time APPN was initialized.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.40TimeTicksread-onlymandatory
ibmappnNodeLsActiveTime
OBJECT-TYPE
The time (in hundredth of seconds) this link station has been in the active state. A zero value indicates the link station has never been active.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.41TimeTicksread-onlymandatory
ibmappnNodeLsCurrentStateTime
OBJECT-TYPE
The time (in hundredth of seconds) the link station is in the current state.
1.3.6.1.4.1.2.6.2.13.1.5.1.1.42TimeTicksread-onlymandatory
ibmappnNodeLsIpTable
OBJECT-TYPE
Link station table (TCP/IP specific).
1.3.6.1.4.1.2.6.2.13.1.5.2not-accessiblemandatory
ibmappnNodeLsIpEntry
OBJECT-TYPE
The IP Name is used as the index to this table.
1.3.6.1.4.1.2.6.2.13.1.5.2.1not-accessiblemandatory
ibmappnNodeLsIpName
OBJECT-TYPE
Administratively-assigned name for this link station. The name can be from one to eight characters.
1.3.6.1.4.1.2.6.2.13.1.5.2.1.1DisplayString (SIZE(1..8))read-onlymandatory
ibmappnNodeLsIpState
OBJECT-TYPE
State of this link station.
1.3.6.1.4.1.2.6.2.13.1.5.2.1.2INTEGER {inactive(1), pendactive(2), active(3), pendinact(4)}read-onlymandatory
ibmappnNodeLsLocalIpAddr
OBJECT-TYPE
Local IP address.
1.3.6.1.4.1.2.6.2.13.1.5.2.1.3IpAddressread-onlymandatory
ibmappnNodeLsLocalIpPortNum
OBJECT-TYPE
Local TCP/IP port number. The default listening port will be administratively assigned and will dynamically change if this node initiates a session with adjacent node.
1.3.6.1.4.1.2.6.2.13.1.5.2.1.4INTEGERread-onlymandatory
ibmappnNodeLsRemoteIpAddr
OBJECT-TYPE
Remote IP address.
1.3.6.1.4.1.2.6.2.13.1.5.2.1.5IpAddressread-onlymandatory
ibmappnNodeLsRemoteIpPortNum
OBJECT-TYPE
Remote TCP/IP port number.
1.3.6.1.4.1.2.6.2.13.1.5.2.1.6INTEGERread-onlymandatory
ibmappnNodeLsDlsTable
OBJECT-TYPE
Ls Table (DLS specific).
1.3.6.1.4.1.2.6.2.13.1.5.3not-accessiblemandatory
ibmappnNodeLsDlsEntry
OBJECT-TYPE
The DLS Name is used as the index to this table.
1.3.6.1.4.1.2.6.2.13.1.5.3.1not-accessiblemandatory
ibmappnNodeLsDlsName
OBJECT-TYPE
Administratively-assigned name for this link station. The name can be from one to eight characters.
1.3.6.1.4.1.2.6.2.13.1.5.3.1.1DisplayString (SIZE(1..8))read-onlymandatory
ibmappnNodeLsDlsState
OBJECT-TYPE
State of this link station.
1.3.6.1.4.1.2.6.2.13.1.5.3.1.2INTEGER {inactive(1), pendactive(2), active(3), pendinact(4)}read-onlymandatory
ibmappnNodeLsLocalDlsMac
OBJECT-TYPE
Local MAC address.
1.3.6.1.4.1.2.6.2.13.1.5.3.1.3OCTET STRING (SIZE(6))read-onlymandatory
ibmappnNodeLsLocalDlsSap
OBJECT-TYPE
Local SAP address.
1.3.6.1.4.1.2.6.2.13.1.5.3.1.4OCTET STRING (SIZE(1))read-onlymandatory
ibmappnNodeLsRemoteDlsMac
OBJECT-TYPE
Remote MAC address.
1.3.6.1.4.1.2.6.2.13.1.5.3.1.5OCTET STRING (SIZE(6))read-onlymandatory
ibmappnNodeLsRemoteDlsSap
OBJECT-TYPE
Remote SAP address.
1.3.6.1.4.1.2.6.2.13.1.5.3.1.6OCTET STRING (SIZE(1))read-onlymandatory
ibmappnNodeLsTrTable
OBJECT-TYPE
Ls Table (Token Ring specific).
1.3.6.1.4.1.2.6.2.13.1.5.4not-accessiblemandatory
ibmappnNodeLsTrEntry
OBJECT-TYPE
The TR Name is used as the index to this table.
1.3.6.1.4.1.2.6.2.13.1.5.4.1not-accessiblemandatory
ibmappnNodeLsTrName
OBJECT-TYPE
Administratively-assigned name for this link station. The name can be from one to eight characters.
1.3.6.1.4.1.2.6.2.13.1.5.4.1.1DisplayString (SIZE(1..8))read-onlymandatory
ibmappnNodeLsTrState
OBJECT-TYPE
State of this link station.
1.3.6.1.4.1.2.6.2.13.1.5.4.1.2INTEGER {inactive(1), pendactive(2), active(3), pendinact(4)}read-onlymandatory
ibmappnNodeLsLocalTrMac
OBJECT-TYPE
Local MAC address.
1.3.6.1.4.1.2.6.2.13.1.5.4.1.3OCTET STRING (SIZE(6))read-onlymandatory
ibmappnNodeLsLocalTrSap
OBJECT-TYPE
Local SAP address.
1.3.6.1.4.1.2.6.2.13.1.5.4.1.4OCTET STRING (SIZE(1))read-onlymandatory
ibmappnNodeLsRemoteTrMac
OBJECT-TYPE
Remote MAC address.
1.3.6.1.4.1.2.6.2.13.1.5.4.1.5OCTET STRING (SIZE(6))read-onlymandatory
ibmappnNodeLsRemoteTrSap
OBJECT-TYPE
Remote SAP address.
1.3.6.1.4.1.2.6.2.13.1.5.4.1.6OCTET STRING (SIZE(1))read-onlymandatory
ibmappnNodeLsStatusTable
OBJECT-TYPE
This table contains information related to exceptional and potential exceptional conditions that occur during the activation, XID exchange, and termination of the connection.
1.3.6.1.4.1.2.6.2.13.1.5.5not-accessiblemandatory
ibmappnNodeLsStatusEntry
OBJECT-TYPE
This table is indexed by the LsStatusIndex, which is an integer that is continuously updated until it eventually wraps. This provides the management station the ability to retrieve only the updates to the table by using the standard GET NEXT.
1.3.6.1.4.1.2.6.2.13.1.5.5.1not-accessiblemandatory
ibmappnNodeLsStatusIndex
OBJECT-TYPE
This index is continuous index this table.
1.3.6.1.4.1.2.6.2.13.1.5.5.1.1INTEGERread-onlymandatory
ibmappnNodeLsStatusTime
OBJECT-TYPE
Time (in hundreds of a second) since this node was last initialized.
1.3.6.1.4.1.2.6.2.13.1.5.5.1.2TimeTicksread-onlymandatory
ibmappnNodeLsStatusLsName
OBJECT-TYPE
Administratively-assigned name for this link station.
1.3.6.1.4.1.2.6.2.13.1.5.5.1.3DisplayString (SIZE(1..8))read-onlymandatory
ibmappnNodeLsStatusCpName
OBJECT-TYPE
Administratively-assigned fully-qualified name of the adjacent node partner. This will be provided when the adjacent node has been defined at this node or when the XID sequence has proceeded far enough to to identify the adjacent node. A blank CP name will indicate the name is unknown.
1.3.6.1.4.1.2.6.2.13.1.5.5.1.4DisplayString (SIZE(3..17))read-onlymandatory
ibmappnNodeLsStatusNodeId
OBJECT-TYPE
Adjacent Node id
1.3.6.1.4.1.2.6.2.13.1.5.5.1.5OCTET STRINGread-onlymandatory
ibmappnNodeLsStatusTgNum
OBJECT-TYPE
Number associated with the TG to this link station with a range from 0 to 256. A value of 256 indicates the tg number has not been negotiated and is unknown at this time.
1.3.6.1.4.1.2.6.2.13.1.5.5.1.6INTEGER (0..256)read-onlymandatory
ibmappnNodeLsStatusGeneralSense
OBJECT-TYPE
The error sense code associated with the start sequence of activation of a link up to the beginning of the XID sequence.
1.3.6.1.4.1.2.6.2.13.1.5.5.1.7OCTET STRINGread-onlymandatory
ibmappnNodeLsStatusNofRetry
OBJECT-TYPE
Indicates whether Node Operator Facility will retry the start request to activate the link.
1.3.6.1.4.1.2.6.2.13.1.5.5.1.8INTEGER {retry(1), noretry(2)}read-onlymandatory
ibmappnNodeLsStatusEndSense
OBJECT-TYPE
The sense code associated with the termination of the link connection to adjacent node. This includes all sense information included in the disconnect recieved from the lower layer DLCs and also sense information indicating the link termination originated by upper layer APPN components.
1.3.6.1.4.1.2.6.2.13.1.5.5.1.9OCTET STRINGread-onlymandatory
ibmappnNodeLsStatusXidLocalSense
OBJECT-TYPE
The error sense code associated with the rejection of the XID.
1.3.6.1.4.1.2.6.2.13.1.5.5.1.10OCTET STRINGread-onlymandatory
ibmappnNodeLsStatusXidRemoteSense
OBJECT-TYPE
The error sense code adjacent node returned to this node indicating the reason the XID was rejected.
1.3.6.1.4.1.2.6.2.13.1.5.5.1.11OCTET STRINGread-onlymandatory
ibmappnNodeLsStatusXidByteInError
OBJECT-TYPE
This identifies the actual byte in the XID that caused the error. The value of zero (0) indicates that the variable has no meaning.
1.3.6.1.4.1.2.6.2.13.1.5.5.1.12INTEGER {na(1000)}read-onlymandatory
ibmappnNodeLsStatusXidBitInError
OBJECT-TYPE
This identifies the actual bit within the error byte of the XID. This only has meaning when the byte in error is greater than zero.
1.3.6.1.4.1.2.6.2.13.1.5.5.1.13INTEGER {na(8)}read-onlymandatory
ibmappnNodeLsStatusDlcType
OBJECT-TYPE
This identifies DLC type that was being used when error occurred. This also is used to the format of the local and remote address provided. other = free form DisplayString ip = ld. ld. ld. ld / 2d tr = lx: lx: lx: lx: lx: lx . lx dlsw = lx: lx: lx: lx: lx: lx . lx ethernet = lx: lx: lx: lx: lx: lx . lx
1.3.6.1.4.1.2.6.2.13.1.5.5.1.14INTEGER {other(1), sdlc(2), dls(3), socket(4), ethernet(5), tr(6)}read-onlymandatory
ibmappnNodeLsStatusLocalAddr
OBJECT-TYPE
This contains a displayable string that identifies the DLC type and appropriate address. See DlcType above for details of the format.
1.3.6.1.4.1.2.6.2.13.1.5.5.1.15DisplayStringread-onlymandatory
ibmappnNodeLsStatusRemoteAddr
OBJECT-TYPE
This contains a displayable string that identifies the DLC type and appropriate address. See DlcType above for details of the format.
1.3.6.1.4.1.2.6.2.13.1.5.5.1.16DisplayStringread-onlymandatory
ibmappnSnmpInformation
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.2.13.1.6
ibmappnSnmpInPkts
OBJECT-TYPE
Total number of messages delivered to the APPN SNMP sub-agent.
1.3.6.1.4.1.2.6.2.13.1.6.1Counterread-onlymandatory
ibmappnSnmpInGetRequests
OBJECT-TYPE
Total number of GET requests delivered to the APPN SNMP sub-agent.
1.3.6.1.4.1.2.6.2.13.1.6.2Counterread-onlymandatory
ibmappnSnmpInGetNexts
OBJECT-TYPE
Total number of GETNEXT requests delivered to the APPN SNMP sub-agent.
1.3.6.1.4.1.2.6.2.13.1.6.3Counterread-onlymandatory
ibmappnSnmpInSetRequests
OBJECT-TYPE
Total number of SET requests delivered to the APPN SNMP sub-agent.
1.3.6.1.4.1.2.6.2.13.1.6.4Counterread-onlymandatory
ibmappnSnmpInTotalVars
OBJECT-TYPE
Total number of VARIABLES included in both GET and GETNEXT requests to the APPN SNMP sub-agent.
1.3.6.1.4.1.2.6.2.13.1.6.5Counterread-onlymandatory
ibmappnSnmpInGetVars
OBJECT-TYPE
Total number of VARIBLES included in all GET requests to the APPN SNMP sub-agent.
1.3.6.1.4.1.2.6.2.13.1.6.6Counterread-onlymandatory
ibmappnSnmpInGetNextVars
OBJECT-TYPE
Total number of VARIABLES included in all GETNEXT requests to the APPN SNMP sub-agent.
1.3.6.1.4.1.2.6.2.13.1.6.7Counterread-onlymandatory
ibmappnSnmpInSetVars
OBJECT-TYPE
Total number of VARIBLES included in all SET requests to the APPN SNMP sub-agent.
1.3.6.1.4.1.2.6.2.13.1.6.8Counterread-onlymandatory
ibmappnSnmpOutNoSuchNames
OBJECT-TYPE
Total number of VARIABLES that could not be found by the APPN SNMP sub-agent.
1.3.6.1.4.1.2.6.2.13.1.6.9Counterread-onlymandatory
ibmappnSnmpOutGenErrs
OBJECT-TYPE
Total number of undefined errors that occurred processing SNMP request to the APPN SNMP sub-agent.
1.3.6.1.4.1.2.6.2.13.1.6.10Counterread-onlymandatory
ibmappnMemoryUse
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.2.13.1.7
ibmappnMemorySize
OBJECT-TYPE
Size of the shared storage segment, as obtained by storage management from the underlying operating system.
1.3.6.1.4.1.2.6.2.13.1.7.1INTEGERread-onlymandatory
ibmappnMemoryUsed
OBJECT-TYPE
Number of bytes in the segment that are currently allocated to process.
1.3.6.1.4.1.2.6.2.13.1.7.2INTEGERread-onlymandatory
ibmappnMemoryWarnThresh
OBJECT-TYPE
Allocation threshold beyond which storage management considers the storage resources to be constrained.
1.3.6.1.4.1.2.6.2.13.1.7.3INTEGERread-onlymandatory
ibmappnMemoryCritThresh
OBJECT-TYPE
Allocation threshold beyond which storage management considers the storage resources to be critically constrained.
1.3.6.1.4.1.2.6.2.13.1.7.4INTEGERread-onlymandatory
ibmappnXidInformation
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.2.13.1.8
ibmappnNodeDefLsGoodXids
OBJECT-TYPE
The current number of successfull XIDs that have occurred on all defined link stations since the last time this node was initialized.
1.3.6.1.4.1.2.6.2.13.1.8.1Counterread-onlymandatory
ibmappnNodeDefLsBadXids
OBJECT-TYPE
The current number of unsuccessfull XIDs that have occurred on all defined link stations since the last time this node was initialized.
1.3.6.1.4.1.2.6.2.13.1.8.2Counterread-onlymandatory
ibmappnNodeDynLsGoodXids
OBJECT-TYPE
The current number of successfull XIDs that have occurred on all dynamic link stations since the last time this node was initialized.
1.3.6.1.4.1.2.6.2.13.1.8.3Counterread-onlymandatory
ibmappnNodeDynLsBadXids
OBJECT-TYPE
The current number of unsuccessfull XIDs that have occurred on all dynamic link stations since the last time this node was initialized.
1.3.6.1.4.1.2.6.2.13.1.8.4Counterread-onlymandatory
ibmappnNn
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.2.13.2
ibmappnNnTopo
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.2.13.2.1
ibmappnNnTopoMaxNodes
OBJECT-TYPE
Maximum number of nodes allowed in the APPN topology database. This administratively assigned value must be equal to or greater than the maximum total number of end nodes and network nodes. If the number of nodes exceeds this value, APPN will issue an Alert and the node can no longer participate as a network node.
1.3.6.1.4.1.2.6.2.13.2.1.1INTEGERread-onlymandatory
ibmappnNnTopoCurNumNodes
OBJECT-TYPE
Current number of nodes in this node's topology database. If this value exceeds the maximum number of nodes allowed (NnTopoMaxNodes), APPN alert CPDB002 is issued.
1.3.6.1.4.1.2.6.2.13.2.1.2Gaugeread-onlymandatory
ibmappnNnTopoInTdus
OBJECT-TYPE
Total number of TDUs received from all adjacent NN since last initialization.
1.3.6.1.4.1.2.6.2.13.2.1.3Counterread-onlymandatory
ibmappnNnTopoOutTdus
OBJECT-TYPE
Total number of TDUs built by this node to be sent to all adjacent NN since last initialization.
1.3.6.1.4.1.2.6.2.13.2.1.4Counterread-onlymandatory
ibmappnNnTopoNodeLowRsns
OBJECT-TYPE
Total number of topology node updates received by this node with a RSN less than the current RSN. Both even and odd RSN are included in this count. These TDUs are not errors, but result when TDUs are broadcast to all adjacent network nodes. No update to this node's topology database occurs, but this node will send a TDU with it's higher RSN to the adjacent node that sent this low RSN.
1.3.6.1.4.1.2.6.2.13.2.1.5Counterread-onlymandatory
ibmappnNnTopoNodeEqualRsns
OBJECT-TYPE
Total number of topology node updates received by this node with a RSN equal to the current RSN. Both even and odd RSN are included in this count. These TDUs are not errors, but result when TDUs are broadcast to all adjacent network nodes. No update to this node's topology database occurs.
1.3.6.1.4.1.2.6.2.13.2.1.6Counterread-onlymandatory
ibmappnNnTopoNodeGoodHighRsns
OBJECT-TYPE
Total number of topology node updates received by this node with a RSN greater than the current RSN. This results in updating this nodes topology and broadcasting a TDU to all adjacent network nodes. It is not required to send a TDU to the sender of this update because that node already has the update.
1.3.6.1.4.1.2.6.2.13.2.1.7Counterread-onlymandatory
ibmappnNnTopoNodeBadHighRsns
OBJECT-TYPE
Total number of topology node updates received by this node with an odd RSN greater than the current RSN. These updates represent a topology inconsistency detected by one of the APPN network nodes. This results in updating this nodes topology and broadcasting a TDU to all adjacent network nodes.
1.3.6.1.4.1.2.6.2.13.2.1.8Counterread-onlymandatory
ibmappnNnTopoNodeStateUpdates
OBJECT-TYPE
Total number of topology Node records built as a result of internally detected node state changes that affect APPN topology and routing. Updates are sent via TDUs to all adjacent network nodes.
1.3.6.1.4.1.2.6.2.13.2.1.9Counterread-onlymandatory
ibmappnNnTopoNodeErrors
OBJECT-TYPE
Total number of topology node records inconsistencies detected by this node. This occurs when this node attempts to update its topology database and detects a data inconsistency. This node will create a TDU with the current RSN incremented to the next odd number and broadcast it to all adjacent NNs.
1.3.6.1.4.1.2.6.2.13.2.1.10Counterread-onlymandatory
ibmappnNnTopoNodeTimerUpdates
OBJECT-TYPE
Total number of topology node records built for this node's resource due to timer updates. Updates are sent via TDUs to all adjacent network nodes. These updates insure other network nodes do not delete this node's resources from their topology database.
1.3.6.1.4.1.2.6.2.13.2.1.11Counterread-onlymandatory
ibmappnNnTopoNodePurges
OBJECT-TYPE
Total number of topology node records purged from this node's topology database. This occurs when a node has not been updated in a specified amount of time. The owning node is responsible for broadcasting updates for its resource that it wants kept in the network topology.
1.3.6.1.4.1.2.6.2.13.2.1.12Counterread-onlymandatory
ibmappnNnTopoTgLowRsns
OBJECT-TYPE
Total number of topology TG updates received by this node with a RSN less than the current RSN. Both even and odd RSN are included in this count. These TDUs are not errors, but result when TDUs are broadcast to all adjacent network nodes. No update to this node's topology database occurs, but this node will send a TDU with it's higher RSN to the sender of the low RSN.
1.3.6.1.4.1.2.6.2.13.2.1.13Counterread-onlymandatory
ibmappnNnTopoTgEqualRsns
OBJECT-TYPE
Total number of topology TG updates received by this node with a RSN equal to the current RSN. Both even and odd RSN are included in this count. These TDUs are not errors, but result when TDUs are broadcast to all adjacent network nodes. No update to this node's topology database occurs.
1.3.6.1.4.1.2.6.2.13.2.1.14Counterread-onlymandatory
ibmappnNnTopoTgGoodHighRsns
OBJECT-TYPE
Total number of topology TG updates received by this node with a RSN greater than the current RSN. This results in updating this nodes topology and broadcasting the update to all adjacent network nodes.
1.3.6.1.4.1.2.6.2.13.2.1.15Counterread-onlymandatory
ibmappnNnTopoTgBadHighRsns
OBJECT-TYPE
Total number of topology TG updates received by this node with an odd RSN greater than the current RSN. These updates represent a topology inconsistency detected by one of the APPN network nodes. This results in updating this nodes topology and broadcasting a TDU to all adjacent network nodes.
1.3.6.1.4.1.2.6.2.13.2.1.16Counterread-onlymandatory
ibmappnNnTopoTgStateUpdates
OBJECT-TYPE
Total number of topology TG records built as a result of internally detected node state changes that affect APPN topology and routing. Updates are sent via TDUs to all adjacent network nodes.
1.3.6.1.4.1.2.6.2.13.2.1.17Counterread-onlymandatory
ibmappnNnTopoTgErrors
OBJECT-TYPE
Total number of topology TG records inconsistencies detected by this node. This occurs when this node attempts to update its topology database and detects a data inconsistency. This node will create a TDU with the current RSN incremented to the next odd number and broadcast it to all adjacent NNs.
1.3.6.1.4.1.2.6.2.13.2.1.18Counterread-onlymandatory
ibmappnNnTopoTgTimerUpdates
OBJECT-TYPE
Total number of topology TG records built for this node's resource due to timer updates. Updates are sent via TDUs to all adjacent network nodes. These updates insure other network nodes do not delete this node's resources from their topology database.
1.3.6.1.4.1.2.6.2.13.2.1.19Counterread-onlymandatory
ibmappnNnTopoTgPurges
OBJECT-TYPE
Total number of topology TG records purged from this node's topology database. This occurs when a TG has not been updated in a specified amount of time. The owning node is responsible for broadcasting updates for its resource that it wants to keep in the network topology.
1.3.6.1.4.1.2.6.2.13.2.1.20Counterread-onlymandatory
ibmappnNnTopoTotalRouteCalcs
OBJECT-TYPE
Number of routes calculated for all class of services since the last initialization.
1.3.6.1.4.1.2.6.2.13.2.1.21Counterread-onlymandatory
ibmappnNnTopoTotalRouteRejs
OBJECT-TYPE
Number of route requests for all class of services that could not be calculated since last initialization.
1.3.6.1.4.1.2.6.2.13.2.1.22Counterread-onlymandatory
ibmappnNnTopoRouteTable
OBJECT-TYPE
Table containing an entry for every Class of Service that it has calculated a route for.
1.3.6.1.4.1.2.6.2.13.2.1.23not-accessiblemandatory
ibmappnNnTopoRouteEntry
OBJECT-TYPE
The Class of Service name is the index for this table.
1.3.6.1.4.1.2.6.2.13.2.1.23.1not-accessiblemandatory
ibmappnNnTopoRouteCos
OBJECT-TYPE
The Class of Service for the route.
1.3.6.1.4.1.2.6.2.13.2.1.23.1.1DisplayStringread-onlymandatory
ibmappnNnTopoRouteTrees
OBJECT-TYPE
Number of routes tree caches built for this Class of Service since the last initialization.
1.3.6.1.4.1.2.6.2.13.2.1.23.1.2Counterread-onlymandatory
ibmappnNnTopoRouteCalcs
OBJECT-TYPE
Number of routes calculated since last initialization.
1.3.6.1.4.1.2.6.2.13.2.1.23.1.3Counterread-onlymandatory
ibmappnNnTopoRouteRejs
OBJECT-TYPE
Number of route requests that could not be calculated since last initialization.
1.3.6.1.4.1.2.6.2.13.2.1.23.1.4Counterread-onlymandatory
ibmappnNnAdjNodeTable
OBJECT-TYPE
Table containing an entry for every node. The information kept in this table is the last FRSN sent and received, the status of the CP-CP sessions, and a gauge that indicates the number of outstanding TDUs.
1.3.6.1.4.1.2.6.2.13.2.2not-accessiblemandatory
ibmappnNnAdjNodeEntry
OBJECT-TYPE
The adjacent node name is the index for this table.
1.3.6.1.4.1.2.6.2.13.2.2.1not-accessiblemandatory
ibmappnNnAdjNodeAdjName
OBJECT-TYPE
An administratively-assigned fully-qualified name of this node's adjacent network node.
1.3.6.1.4.1.2.6.2.13.2.2.1.1DisplayString (SIZE(3..17))read-onlymandatory
ibmappnNnAdjNodeCpCpSessStatus
OBJECT-TYPE
Indicates the state of CP-CP sessions between this node and adjacent network and end nodes. Incative indicates no CP-CP sessions exists between this node and the adjacent node. Active indicates CP-CP sessons are active using both the ConWinner and ConLoser sessions. The session initiated by this node is refered to as the ConWinner session and is used by this node to send to the adjacent node. The ConLoserr session is initiated by the adjacent node and is used by this node to receive from the adjacent node.
1.3.6.1.4.1.2.6.2.13.2.2.1.2INTEGER {active(1), conLoserActive(2), conWinnerActive(3), inactive(4)}read-onlymandatory
ibmappnNnAdjNodeOutOfSeqTdus
OBJECT-TYPE
Number of out of sequence Topology Database Updates (TDUs). In a quiesced state, this value is zero. In normal operation, the value varies depending on the network environment.
1.3.6.1.4.1.2.6.2.13.2.2.1.3Gaugeread-onlymandatory
ibmappnNnAdjNodeLastFrsnSent
OBJECT-TYPE
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last TDU sent to this adjacent node.
1.3.6.1.4.1.2.6.2.13.2.2.1.4INTEGER (0..65535)read-onlymandatory
ibmappnNnAdjNodeLastFrsnRcvd
OBJECT-TYPE
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last TDU received from this adjacent node.
1.3.6.1.4.1.2.6.2.13.2.2.1.5INTEGER (0..65535)read-onlymandatory
ibmappnNnTopology
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.2.13.2.3
ibmappnNnTopologyTable
OBJECT-TYPE
Portion of the APPN routing table that describes all of the APPN network nodes and virtual nodes known to this node.
1.3.6.1.4.1.2.6.2.13.2.3.1not-accessiblemandatory
ibmappnNnTopologyEntry
OBJECT-TYPE
The fully-qualified node name is used to index this table.
1.3.6.1.4.1.2.6.2.13.2.3.1.1not-accessiblemandatory
ibmappnNnNodeName
OBJECT-TYPE
Administratively-assigned network name that is locally defined at each network node in the format NETID.CPNAME.
1.3.6.1.4.1.2.6.2.13.2.3.1.1.1DisplayString (SIZE(3..17))read-onlymandatory
ibmappnNnNodeFrsn
OBJECT-TYPE
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last time this resource was updated at this node.
1.3.6.1.4.1.2.6.2.13.2.3.1.1.2INTEGER (0..65535)read-onlymandatory
ibmappnNnNodeEntryTimeLeft
OBJECT-TYPE
Number of days before deletion of this network node entry. Range is 0-31.
1.3.6.1.4.1.2.6.2.13.2.3.1.1.3INTEGER (0..31)read-onlymandatory
ibmappnNnNodeType
OBJECT-TYPE
Type of APPN node.
1.3.6.1.4.1.2.6.2.13.2.3.1.1.4INTEGER {networknode(1), virtualnode(3)}read-onlymandatory
ibmappnNnNodeRsn
OBJECT-TYPE
Resource sequence number that is assigned and controlled by the network node that owns this resource. This is always an even 32-bit number unless an error has occurred.
1.3.6.1.4.1.2.6.2.13.2.3.1.1.5INTEGERread-onlymandatory
ibmappnNnNodeRouteAddResist
OBJECT-TYPE
Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, is used in route computation. The lower the value, the more desirable the node is for intermediate routing.
1.3.6.1.4.1.2.6.2.13.2.3.1.1.6INTEGERread-onlymandatory
ibmappnNnNodeCongested
OBJECT-TYPE
Indicates whether this node is congested. This node is not be included in route selection by other nodes when this congestion exists.
1.3.6.1.4.1.2.6.2.13.2.3.1.1.7INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNnNodeIsrDepleted
OBJECT-TYPE
Indicates whether intermediate session routing resources are depleted. This node is not included in intermediate route selection by other nodes when resources are depleted.
1.3.6.1.4.1.2.6.2.13.2.3.1.1.8INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNnNodeEndptDepleted
OBJECT-TYPE
Indicates whether session endpoint resources are depleted.
1.3.6.1.4.1.2.6.2.13.2.3.1.1.9INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNnNodeQuiescing
OBJECT-TYPE
Indicates whether the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing.
1.3.6.1.4.1.2.6.2.13.2.3.1.1.10INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNnNodeGateway
OBJECT-TYPE
Indicates whether the node provide gateway functions.
1.3.6.1.4.1.2.6.2.13.2.3.1.1.11INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNnNodeCentralDirectory
OBJECT-TYPE
Indicates whether the node is central directory.
1.3.6.1.4.1.2.6.2.13.2.3.1.1.12INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNnNodeIsr
OBJECT-TYPE
Indicates whether the node supports intermediate session routing (ISR).
1.3.6.1.4.1.2.6.2.13.2.3.1.1.13INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNnNodeChainSupport
OBJECT-TYPE
Indicates whether the node supports chaining.
1.3.6.1.4.1.2.6.2.13.2.3.1.1.14INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNnTgTopologyTable
OBJECT-TYPE
Portion of the APPN topology database that describes all of the APPN transmissions groups used by the APPN network nodes.
1.3.6.1.4.1.2.6.2.13.2.3.2not-accessiblemandatory
ibmappnNnTgTopologyEntry
OBJECT-TYPE
This table requires three indexes to provide a unique index. The indexes are the owning or originating CPname, the destination CPname, and the TG number.
1.3.6.1.4.1.2.6.2.13.2.3.2.1not-accessiblemandatory
ibmappnNnTgOwner
OBJECT-TYPE
Administratively-assigned name for the originating node for this TG. The format is NETID.CPNAME and is the same name specified in the node table.
1.3.6.1.4.1.2.6.2.13.2.3.2.1.1DisplayString (SIZE(3..17))read-onlymandatory
ibmappnNnTgDest
OBJECT-TYPE
Administratively-assigned fully-qualified network name for the destination node for this TG.
1.3.6.1.4.1.2.6.2.13.2.3.2.1.2DisplayString (SIZE(3..17))read-onlymandatory
ibmappnNnTgNum
OBJECT-TYPE
Number associated with this transmission group. Range is 0-255.
1.3.6.1.4.1.2.6.2.13.2.3.2.1.3INTEGER (0..255)read-onlymandatory
ibmappnNnTgFrsn
OBJECT-TYPE
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last time this resource was updated at this node.
1.3.6.1.4.1.2.6.2.13.2.3.2.1.4INTEGER (0..65535)read-onlymandatory
ibmappnNnTgEntryTimeLeft
OBJECT-TYPE
Number of days before deletion of this network node TG entry. Range is 0-31.
1.3.6.1.4.1.2.6.2.13.2.3.2.1.5INTEGER (0..31)read-onlymandatory
ibmappnNnTgDestVirtual
OBJECT-TYPE
Indicates whether the destination node is a virtual node.
1.3.6.1.4.1.2.6.2.13.2.3.2.1.6INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNnTgDlcData
OBJECT-TYPE
DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial digits
1.3.6.1.4.1.2.6.2.13.2.3.2.1.7OCTET STRING (SIZE(0..9))read-onlymandatory
ibmappnNnTgRsn
OBJECT-TYPE
Current owning node's resource sequence number for this resource.
1.3.6.1.4.1.2.6.2.13.2.3.2.1.8INTEGERread-onlymandatory
ibmappnNnTgOperational
OBJECT-TYPE
Indicates whether the transmission group is operational.
1.3.6.1.4.1.2.6.2.13.2.3.2.1.9INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNnTgQuiescing
OBJECT-TYPE
Indicates whether the transmission group is quiescing.
1.3.6.1.4.1.2.6.2.13.2.3.2.1.10INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNnTgCpCpSession
OBJECT-TYPE
Indicates whether CP-CP sessions are supported on this TG.
1.3.6.1.4.1.2.6.2.13.2.3.2.1.11INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNnTgEffCap
OBJECT-TYPE
The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 603,979,776. This is an administratively assigned value associated with this TG.
1.3.6.1.4.1.2.6.2.13.2.3.2.1.12INTEGERread-onlymandatory
ibmappnNnTgConnCost
OBJECT-TYPE
Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This is an administratively assigned value associated with this TG.
1.3.6.1.4.1.2.6.2.13.2.3.2.1.13INTEGER (0..255)read-onlymandatory
ibmappnNnTgByteCost
OBJECT-TYPE
Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with this TG.
1.3.6.1.4.1.2.6.2.13.2.3.2.1.14INTEGER (0..255)read-onlymandatory
ibmappnNnTgSecurity
OBJECT-TYPE
The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assigned value associated with this TG.
1.3.6.1.4.1.2.6.2.13.2.3.2.1.15INTEGER {nonsecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192)}read-onlymandatory
ibmappnNnTgDelay
OBJECT-TYPE
Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more common values enumerated. This is an administratively assigned value associated with this TG.
1.3.6.1.4.1.2.6.2.13.2.3.2.1.16INTEGER {minimum(0), negligible(384), terrestrial(9216), packet(147456), long(294912), maximum(2013265920)}read-onlymandatory
ibmappnNnTgModemClass
OBJECT-TYPE
This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector; for a non-connection network it is X'00'.
1.3.6.1.4.1.2.6.2.13.2.3.2.1.17INTEGER (0..65535)read-onlymandatory
ibmappnNnTgUsr1
OBJECT-TYPE
First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.
1.3.6.1.4.1.2.6.2.13.2.3.2.1.18INTEGER (0..255)read-onlymandatory
ibmappnNnTgUsr2
OBJECT-TYPE
Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.
1.3.6.1.4.1.2.6.2.13.2.3.2.1.19INTEGER (0..255)read-onlymandatory
ibmappnNnTgUsr3
OBJECT-TYPE
Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.
1.3.6.1.4.1.2.6.2.13.2.3.2.1.20INTEGER (0..255)read-onlymandatory
ibmappnNnTopologyFRTable
OBJECT-TYPE
Portion of the APPN routing table that describes all of the APPN network nodes and virtual nodes known to this node.
1.3.6.1.4.1.2.6.2.13.2.3.3not-accessiblemandatory
ibmappnNnTopologyFREntry
OBJECT-TYPE
This table is indexed by two columns: FRSN, followed by fully-qualified node name.
1.3.6.1.4.1.2.6.2.13.2.3.3.1not-accessiblemandatory
ibmappnNnNodeFRName
OBJECT-TYPE
Administratively-assigned network name that is locally defined at each network node in the format NETID.CPNAME.
1.3.6.1.4.1.2.6.2.13.2.3.3.1.1DisplayString (SIZE(3..17))read-onlymandatory
ibmappnNnNodeFRFrsn
OBJECT-TYPE
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last time this resource was updated at this node.
1.3.6.1.4.1.2.6.2.13.2.3.3.1.2INTEGER (0..65535)read-onlymandatory
ibmappnNnNodeFREntryTimeLeft
OBJECT-TYPE
Number of days before deletion of this network node entry. Range is 0-31.
1.3.6.1.4.1.2.6.2.13.2.3.3.1.3INTEGER (0..31)read-onlymandatory
ibmappnNnNodeFRType
OBJECT-TYPE
Type of APPN node.
1.3.6.1.4.1.2.6.2.13.2.3.3.1.4INTEGER {networknode(1), virtualnode(3)}read-onlymandatory
ibmappnNnNodeFRRsn
OBJECT-TYPE
Resource sequence number that is assigned and controlled by the network node that owns this resource. This is always an even 32-bit number unless an error has occurred.
1.3.6.1.4.1.2.6.2.13.2.3.3.1.5INTEGERread-onlymandatory
ibmappnNnNodeFRRouteAddResist
OBJECT-TYPE
Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, is used in route computation. The lower the value, the more desirable the node is for intermediate routing.
1.3.6.1.4.1.2.6.2.13.2.3.3.1.6INTEGERread-onlymandatory
ibmappnNnNodeFRCongested
OBJECT-TYPE
Indicates whether this node is congested. This node is not be included in route selection by other nodes when this congestion exists.
1.3.6.1.4.1.2.6.2.13.2.3.3.1.7INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNnNodeFRIsrDepleted
OBJECT-TYPE
Indicates whether intermediate session routing resources are depleted. This node is not included in intermediate route selection by other nodes when resources are depleted.
1.3.6.1.4.1.2.6.2.13.2.3.3.1.8INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNnNodeFREndptDepleted
OBJECT-TYPE
Indicates whether session endpoint resources are depleted.
1.3.6.1.4.1.2.6.2.13.2.3.3.1.9INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNnNodeFRQuiescing
OBJECT-TYPE
Indicates whether the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing.
1.3.6.1.4.1.2.6.2.13.2.3.3.1.10INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNnNodeFRGateway
OBJECT-TYPE
Indicates whether the node provide gateway functions.
1.3.6.1.4.1.2.6.2.13.2.3.3.1.11INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNnNodeFRCentralDirectory
OBJECT-TYPE
Indicates whether the node is central directory.
1.3.6.1.4.1.2.6.2.13.2.3.3.1.12INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNnNodeFRIsr
OBJECT-TYPE
Indicates whether the node supports intermediate session routing (ISR).
1.3.6.1.4.1.2.6.2.13.2.3.3.1.13INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNnNodeFRChainSupport
OBJECT-TYPE
Indicates whether the node supports chaining.
1.3.6.1.4.1.2.6.2.13.2.3.3.1.14INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNnTgTopologyFRTable
OBJECT-TYPE
Portion of the APPN topology database that describes all of the APPN transmissions groups used by the APPN network nodes.
1.3.6.1.4.1.2.6.2.13.2.3.4not-accessiblemandatory
ibmappnNnTgTopologyFREntry
OBJECT-TYPE
This table is indexed by four columns: FRSN, TG owner fully-qualified node name, TG destination fully-qualified node name, and TG number.
1.3.6.1.4.1.2.6.2.13.2.3.4.1not-accessiblemandatory
ibmappnNnTgFROwner
OBJECT-TYPE
Administratively-assigned name for the originating node for this TG. The format is NETID.CPNAME and is the same name specified in the node table.
1.3.6.1.4.1.2.6.2.13.2.3.4.1.1DisplayString (SIZE(3..17))read-onlymandatory
ibmappnNnTgFRDest
OBJECT-TYPE
Administratively-assigned fully-qualified network name for the destination node for this TG.
1.3.6.1.4.1.2.6.2.13.2.3.4.1.2DisplayString (SIZE(3..17))read-onlymandatory
ibmappnNnTgFRNum
OBJECT-TYPE
Number associated with this transmission group. Range is 0-255.
1.3.6.1.4.1.2.6.2.13.2.3.4.1.3INTEGER (0..255)read-onlymandatory
ibmappnNnTgFRFrsn
OBJECT-TYPE
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last time this resource was updated at this node.
1.3.6.1.4.1.2.6.2.13.2.3.4.1.4INTEGER (0..65535)read-onlymandatory
ibmappnNnTgFREntryTimeLeft
OBJECT-TYPE
Number of days before deletion of this network node TG entry. Range is 0-31.
1.3.6.1.4.1.2.6.2.13.2.3.4.1.5INTEGER (0..31)read-onlymandatory
ibmappnNnTgFRDestVirtual
OBJECT-TYPE
Indicates whether the destination node is a virtual node.
1.3.6.1.4.1.2.6.2.13.2.3.4.1.6INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNnTgFRDlcData
OBJECT-TYPE
DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial digits
1.3.6.1.4.1.2.6.2.13.2.3.4.1.7OCTET STRING (SIZE(0..9))read-onlymandatory
ibmappnNnTgFRRsn
OBJECT-TYPE
Current owning node's resource sequence number for this resource.
1.3.6.1.4.1.2.6.2.13.2.3.4.1.8INTEGERread-onlymandatory
ibmappnNnTgFROperational
OBJECT-TYPE
Indicates whether the transmission group is operational.
1.3.6.1.4.1.2.6.2.13.2.3.4.1.9INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNnTgFRQuiescing
OBJECT-TYPE
Indicates whether the transmission group is quiescing.
1.3.6.1.4.1.2.6.2.13.2.3.4.1.10INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNnTgFRCpCpSession
OBJECT-TYPE
Indicates whether CP-CP sessions are supported on this TG.
1.3.6.1.4.1.2.6.2.13.2.3.4.1.11INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnNnTgFREffCap
OBJECT-TYPE
The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 603,979,776. This is an administratively assigned value associated with this TG.
1.3.6.1.4.1.2.6.2.13.2.3.4.1.12INTEGERread-onlymandatory
ibmappnNnTgFRConnCost
OBJECT-TYPE
Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This is an administratively assigned value associated with this TG.
1.3.6.1.4.1.2.6.2.13.2.3.4.1.13INTEGER (0..255)read-onlymandatory
ibmappnNnTgFRByteCost
OBJECT-TYPE
Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with this TG.
1.3.6.1.4.1.2.6.2.13.2.3.4.1.14INTEGER (0..255)read-onlymandatory
ibmappnNnTgFRSecurity
OBJECT-TYPE
The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assigned value associated with this TG.
1.3.6.1.4.1.2.6.2.13.2.3.4.1.15INTEGER {nonsecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192)}read-onlymandatory
ibmappnNnTgFRDelay
OBJECT-TYPE
Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more common values enumerated. This is an administratively assigned value associated with this TG.
1.3.6.1.4.1.2.6.2.13.2.3.4.1.16INTEGER {minimum(0), negligible(384), terrestrial(9216), packet(147456), long(294912), maximum(2013265920)}read-onlymandatory
ibmappnNnTgFRModemClass
OBJECT-TYPE
This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector; for a non-connection network it is X'00'.
1.3.6.1.4.1.2.6.2.13.2.3.4.1.17INTEGER (0..65535)read-onlymandatory
ibmappnNnTgFRUsr1
OBJECT-TYPE
First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.
1.3.6.1.4.1.2.6.2.13.2.3.4.1.18INTEGER (0..255)read-onlymandatory
ibmappnNnTgFRUsr2
OBJECT-TYPE
Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.
1.3.6.1.4.1.2.6.2.13.2.3.4.1.19INTEGER (0..255)read-onlymandatory
ibmappnNnTgFRUsr3
OBJECT-TYPE
Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.
1.3.6.1.4.1.2.6.2.13.2.3.4.1.20INTEGER (0..255)read-onlymandatory
ibmappnLocalTopology
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.2.13.3
ibmappnLocalThisNode
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.2.13.3.1
ibmappnLocalGeneral
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.2.13.3.1.1
ibmappnLocalNodeName
OBJECT-TYPE
Administratively-assigned fully-qualified name for this node. Format is NETID.CPNAME.
1.3.6.1.4.1.2.6.2.13.3.1.1.1DisplayString (SIZE(3..17))read-onlymandatory
ibmappnLocalNodeType
OBJECT-TYPE
Type of APPN node.
1.3.6.1.4.1.2.6.2.13.3.1.1.2INTEGER {networknode(1), endnode(2), len(4)}read-onlymandatory
ibmappnLocalNnSpecific
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.2.13.3.1.2
ibmappnLocalNnRsn
OBJECT-TYPE
Resource sequence number is assigned and controlled by the network node that owns this resource. This is always an even unsigned number unless an error has occurred.
1.3.6.1.4.1.2.6.2.13.3.1.2.1INTEGERread-onlymandatory
ibmappnLocalNnRouteAddResist
OBJECT-TYPE
Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, is used in route computation. The lower the value, the more desirable the node is for intermediate routing.
1.3.6.1.4.1.2.6.2.13.3.1.2.2INTEGERread-onlymandatory
ibmappnLocalNnCongested
OBJECT-TYPE
Indicates whether this node is congested. Other network nodes stop routing traffic to this node while this flag is on.
1.3.6.1.4.1.2.6.2.13.3.1.2.3INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnLocalNnIsrDepleted
OBJECT-TYPE
Indicate whether intermediated session routing resources are depleted. Other network nodes stop routing traffic through this node while this flag is on.
1.3.6.1.4.1.2.6.2.13.3.1.2.4INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnLocalNnEndptDepleted
OBJECT-TYPE
Indicates whether session endpoint resources are depleted.
1.3.6.1.4.1.2.6.2.13.3.1.2.5INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnLocalNnQuiescing
OBJECT-TYPE
Indicates whether the node is quiescing.
1.3.6.1.4.1.2.6.2.13.3.1.2.6INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnLocalNnGateway
OBJECT-TYPE
Indicates whether the node is a gateway.
1.3.6.1.4.1.2.6.2.13.3.1.2.7INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnLocalNnCentralDirectory
OBJECT-TYPE
Indicates whether the node is a central directory.
1.3.6.1.4.1.2.6.2.13.3.1.2.8INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnLocalNnIsr
OBJECT-TYPE
Indicates whether the node supports intermediate session routing.
1.3.6.1.4.1.2.6.2.13.3.1.2.9INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnLocalNnChainSupport
OBJECT-TYPE
Indicates whether the node supports chaining.
1.3.6.1.4.1.2.6.2.13.3.1.2.10INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnLocalNnFrsn
OBJECT-TYPE
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This object is the last FRSN sent in a topology update to adjacent network nodes.
1.3.6.1.4.1.2.6.2.13.3.1.2.11INTEGERread-onlymandatory
ibmappnLocalTg
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.2.13.3.1.3
ibmappnLocalTgTable
OBJECT-TYPE
TG Table describes all of the TGs owned by this node. The TG destination can be a virtual node, network node, len, or end node.
1.3.6.1.4.1.2.6.2.13.3.1.3.1not-accessiblemandatory
ibmappnLocalTgEntry
OBJECT-TYPE
This table is indexed by the destination CPname and the TG number.
1.3.6.1.4.1.2.6.2.13.3.1.3.1.1not-accessiblemandatory
ibmappnLocalTgDest
OBJECT-TYPE
Administratively-assigned name for the destination node for this TG. This is the fully-qualified network node name.
1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.1DisplayString (SIZE(3..17))read-onlymandatory
ibmappnLocalTgNum
OBJECT-TYPE
Number associated with this transmission group.
1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.2INTEGERread-onlymandatory
ibmappnLocalTgDestVirtual
OBJECT-TYPE
Indicates whether the destination node is a Virtual node.
1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.3INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnLocalTgDlcData
OBJECT-TYPE
DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial digits
1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.4OCTET STRING (SIZE(0..9))read-onlymandatory
ibmappnLocalTgRsn
OBJECT-TYPE
The resource sequence number is assigned and controlled by the network node that owns this resource. This is always an even unsigned number unless an error has occurred.
1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.5INTEGERread-onlymandatory
ibmappnLocalTgQuiescing
OBJECT-TYPE
Indicates whether the Transmission Group is quiescing.
1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.6INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnLocalTgOperational
OBJECT-TYPE
Indicates whether the Transmission Group is operational.
1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.7INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnLocalTgCpCpSession
OBJECT-TYPE
Indicates whether the CP-CP Sessions are supported on this TG.
1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.8INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnLocalTgEffCap
OBJECT-TYPE
The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 603,979,776.
1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.9INTEGERread-onlymandatory
ibmappnLocalTgConnCost
OBJECT-TYPE
Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255.
1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.10INTEGER (0..255)read-onlymandatory
ibmappnLocalTgByteCost
OBJECT-TYPE
Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255.
1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.11INTEGER (0..255)read-onlymandatory
ibmappnLocalTgSecurity
OBJECT-TYPE
Security level for this TG.
1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.12INTEGER {nonsecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192)}read-onlymandatory
ibmappnLocalTgDelay
OBJECT-TYPE
Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more common values enumerated.
1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.13INTEGER {minimum(0), negligible(384), terrestrial(9216), packet(147456), long(294912), maximum(2013265920)}read-onlymandatory
ibmappnLocalTgModemClass
OBJECT-TYPE
This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector and for a non-connection network it is zero.
1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.14INTEGERread-onlymandatory
ibmappnLocalTgUsr1
OBJECT-TYPE
Value of the first user-defined TG characteristic for this TG. Range is 0-255.
1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.15INTEGER (0..255)read-onlymandatory
ibmappnLocalTgUsr2
OBJECT-TYPE
Value of the second user-defined TG characteristic for this TG. Range is 0-255.
1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.16INTEGER (0..255)read-onlymandatory
ibmappnLocalTgUsr3
OBJECT-TYPE
Value of the third user-defined TG characteristic for this TG. Range is 0-255.
1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.17INTEGER (0..255)read-onlymandatory
ibmappnLocalEnTopology
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.2.13.3.2
ibmappnLocalEnTable
OBJECT-TYPE
Portion of the APPN topology database that describes the end nodes known to this node.
1.3.6.1.4.1.2.6.2.13.3.2.1not-accessiblemandatory
ibmappnLocalEnEntry
OBJECT-TYPE
This table is indexed by the end node CPname.
1.3.6.1.4.1.2.6.2.13.3.2.1.1not-accessiblemandatory
ibmappnLocalEnName
OBJECT-TYPE
Administratively-assigned fully-qualified name of end node in the format NETID.CPNAME.
1.3.6.1.4.1.2.6.2.13.3.2.1.1.1DisplayString (SIZE(3..17))read-onlymandatory
ibmappnLocalEnEntryTimeLeft
OBJECT-TYPE
Number of days before deletion of this end node entry. Range is 0-31.
1.3.6.1.4.1.2.6.2.13.3.2.1.1.2INTEGER (0..31)read-onlymandatory
ibmappnLocalEnType
OBJECT-TYPE
Type of APPN node (must always be a len or end node).
1.3.6.1.4.1.2.6.2.13.3.2.1.1.3INTEGER {endnode(2), len(4)}read-onlymandatory
ibmappnLocalEnTgTable
OBJECT-TYPE
Table describing all of the TGs owned by the end nodes known to this node. The TG destination can be a virtual node, network node, or end node.
1.3.6.1.4.1.2.6.2.13.3.2.2not-accessiblemandatory
ibmappnLocalEnTgEntry
OBJECT-TYPE
This table requires multiple indexes to uniquely identify each TG. They are originating CPname, destination CPname, and the TG number.
1.3.6.1.4.1.2.6.2.13.3.2.2.1not-accessiblemandatory
ibmappnLocalEnTgOrigin
OBJECT-TYPE
Administratively-assigned name for the origination node for this TG. This is the fully-qualified network name.
1.3.6.1.4.1.2.6.2.13.3.2.2.1.1DisplayString (SIZE(3..17))read-onlymandatory
ibmappnLocalEnTgDest
OBJECT-TYPE
Administratively-assigned name for the destination node for this TG. This is the fully-qualified network name.
1.3.6.1.4.1.2.6.2.13.3.2.2.1.2DisplayString (SIZE(3..17))read-onlymandatory
ibmappnLocalEnTgNum
OBJECT-TYPE
Number associated with this transmission group.
1.3.6.1.4.1.2.6.2.13.3.2.2.1.3INTEGERread-onlymandatory
ibmappnLocalEnTgEntryTimeLeft
OBJECT-TYPE
Number of days before deletion of this end node TG entry. Range is 0-31.
1.3.6.1.4.1.2.6.2.13.3.2.2.1.4INTEGER (0..31)read-onlymandatory
ibmappnLocalEnTgDestVirtual
OBJECT-TYPE
Indicates whether the destination node is a virtual node.
1.3.6.1.4.1.2.6.2.13.3.2.2.1.5INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnLocalEnTgDlcData
OBJECT-TYPE
DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial digits
1.3.6.1.4.1.2.6.2.13.3.2.2.1.6OCTET STRINGread-onlymandatory
ibmappnLocalEnTgOperational
OBJECT-TYPE
Indicates whether the Transmission Group is operational.
1.3.6.1.4.1.2.6.2.13.3.2.2.1.7INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnLocalEnTgCpCpSession
OBJECT-TYPE
Indicates whether CP-CP sessions are supported on this TG.
1.3.6.1.4.1.2.6.2.13.3.2.2.1.8INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnLocalEnTgEffCap
OBJECT-TYPE
The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 603,979,776.
1.3.6.1.4.1.2.6.2.13.3.2.2.1.9INTEGERread-onlymandatory
ibmappnLocalEnTgConnCost
OBJECT-TYPE
Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255.
1.3.6.1.4.1.2.6.2.13.3.2.2.1.10INTEGER (0..255)read-onlymandatory
ibmappnLocalEnTgByteCost
OBJECT-TYPE
Relative cost of transmitting a byte over this link. Range is from 0, which means no cost, to 255.
1.3.6.1.4.1.2.6.2.13.3.2.2.1.11INTEGER (0..255)read-onlymandatory
ibmappnLocalEnTgSecurity
OBJECT-TYPE
Security level for this TG.
1.3.6.1.4.1.2.6.2.13.3.2.2.1.12INTEGER {nonsecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192)}read-onlymandatory
ibmappnLocalEnTgDelay
OBJECT-TYPE
Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more common values enumerated.
1.3.6.1.4.1.2.6.2.13.3.2.2.1.13INTEGER {minimum(0), negligible(384), terrestrial(9216), packet(147456), long(294912), maximum(2013265920)}read-onlymandatory
ibmappnLocalEnTgModemClass
OBJECT-TYPE
This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector and for a non connection network it is zero.
1.3.6.1.4.1.2.6.2.13.3.2.2.1.14INTEGER (0..65535)read-onlymandatory
ibmappnLocalEnTgUsr1
OBJECT-TYPE
First user-defined TG characteristic for this TG. Range of values is 0-255.
1.3.6.1.4.1.2.6.2.13.3.2.2.1.15INTEGER (0..255)read-onlymandatory
ibmappnLocalEnTgUsr2
OBJECT-TYPE
Second user-defined TG characteristic for this TG. Range of values is 0-255.
1.3.6.1.4.1.2.6.2.13.3.2.2.1.16INTEGER (0..255)read-onlymandatory
ibmappnLocalEnTgUsr3
OBJECT-TYPE
Third user-defined TG characteristic for this TG. Range of values is 0-255.
1.3.6.1.4.1.2.6.2.13.3.2.2.1.17INTEGER (0..255)read-onlymandatory
ibmappnDir
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.2.13.5
ibmappnDirPerf
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.2.13.5.1
ibmappnDirMaxCaches
OBJECT-TYPE
Maximum number of cache entries allowed. This is an administratively assigned value.
1.3.6.1.4.1.2.6.2.13.5.1.1INTEGERread-onlymandatory
ibmappnDirCurCaches
OBJECT-TYPE
Current number of cache entries.
1.3.6.1.4.1.2.6.2.13.5.1.2Gaugeread-onlymandatory
ibmappnDirCurHomeEntries
OBJECT-TYPE
Current number of home entries.
1.3.6.1.4.1.2.6.2.13.5.1.3Gaugeread-onlymandatory
ibmappnDirRegEntries
OBJECT-TYPE
Current number of registered entries.
1.3.6.1.4.1.2.6.2.13.5.1.4Gaugeread-onlymandatory
ibmappnDirInLocates
OBJECT-TYPE
Number of directed locates received.
1.3.6.1.4.1.2.6.2.13.5.1.5Counterread-onlymandatory
ibmappnDirInBcastLocates
OBJECT-TYPE
Number of broadcast locates received.
1.3.6.1.4.1.2.6.2.13.5.1.6Counterread-onlymandatory
ibmappnDirOutLocates
OBJECT-TYPE
Number of directed locates sent.
1.3.6.1.4.1.2.6.2.13.5.1.7Counterread-onlymandatory
ibmappnDirOutBcastLocates
OBJECT-TYPE
Number of broadcast locates sent.
1.3.6.1.4.1.2.6.2.13.5.1.8Counterread-onlymandatory
ibmappnDirNotFoundLocates
OBJECT-TYPE
Number of directed locates returned with a 'not found'.
1.3.6.1.4.1.2.6.2.13.5.1.9Counterread-onlymandatory
ibmappnDirNotFoundBcastLocates
OBJECT-TYPE
Number of broadcast locates returned with a not found.
1.3.6.1.4.1.2.6.2.13.5.1.10Counterread-onlymandatory
ibmappnDirLocateOutstands
OBJECT-TYPE
Current number of outstanding locates, both directed and broadcast. This value varies. A value of zero indicates that no locates are unanswered.
1.3.6.1.4.1.2.6.2.13.5.1.11Gaugeread-onlymandatory
ibmappnDirTable
OBJECT-TYPE
Table containing information about all known LUs and TPs.
1.3.6.1.4.1.2.6.2.13.5.2not-accessiblemandatory
ibmappnDirEntry
OBJECT-TYPE
This table is indexed by the LU name.
1.3.6.1.4.1.2.6.2.13.5.2.1not-accessiblemandatory
ibmappnDirLuName
OBJECT-TYPE
Fully-qualified network LU name in the domain of the serving network node.
1.3.6.1.4.1.2.6.2.13.5.2.1.1DisplayString (SIZE(3..17))read-onlymandatory
ibmappnDirServerName
OBJECT-TYPE
Fully-qualified control point (CP) name of the network node server. For unassociated end node entries, the end node fully-qualified name is returned.
1.3.6.1.4.1.2.6.2.13.5.2.1.2DisplayString (SIZE(3..17))read-onlymandatory
ibmappnDirLuOwnerName
OBJECT-TYPE
Fully-qualified CP name of the node at which the LU is located. This name is the same as the serving NN name when the LU is located at a network node or an unassociated end node. It is also the same as the fully-qualified LU name when this is the control point LU for this node.
1.3.6.1.4.1.2.6.2.13.5.2.1.3DisplayString (SIZE(3..17))read-onlymandatory
ibmappnDirLuLocation
OBJECT-TYPE
Specifies the location of the LU.
1.3.6.1.4.1.2.6.2.13.5.2.1.4INTEGER {local(1), domain(2), xdomain(3)}read-onlymandatory
ibmappnDirType
OBJECT-TYPE
Directory types are: 1 - Home The LU is in the domain of the local network node and the LU information has been configured at the local node. 2 - Cache The LU has previously been located by a broadcast search and the location information has been saved. 3 - Register The LU is at an end node that is in the domain of the local network node. Registered entries are registered by the served end node.
1.3.6.1.4.1.2.6.2.13.5.2.1.5INTEGER {home(1), cache(2), registered(3)}read-onlymandatory
ibmappnDirWildCard
OBJECT-TYPE
1 - Other means unknown type of LU entry. 2 - Expliced-entry means the full LUNAME will be used for locating this LU. 3 - Partial-wildcard means only the non-blank portions of the LUNAME will be used for locating this LU. 4 - Full-wildcard means all LUNAMES will be directed to this LU.
1.3.6.1.4.1.2.6.2.13.5.2.1.6INTEGER {other(1), explicit-entry(2), partial-wildcard(3), full-wildcard(4)}read-onlymandatory
ibmappnCos
OBJECT-IDENTITY
1.3.6.1.4.1.2.6.2.13.6
ibmappnCosModeTable
OBJECT-TYPE
Table representing all of the defined mode names for this node. The table contains the matching COS name.
1.3.6.1.4.1.2.6.2.13.6.1not-accessiblemandatory
ibmappnCosModeEntry
OBJECT-TYPE
This table is indexed by the Mode Name.
1.3.6.1.4.1.2.6.2.13.6.1.1not-accessiblemandatory
ibmappnCosModeName
OBJECT-TYPE
Administratively-assigned name for this mode entry.
1.3.6.1.4.1.2.6.2.13.6.1.1.1DisplayString (SIZE(1..8))read-onlymandatory
ibmappnCosModeCosName
OBJECT-TYPE
An administratively assigned name for this Class of Service.
1.3.6.1.4.1.2.6.2.13.6.1.1.2DisplayString (SIZE(1..8))read-onlymandatory
ibmappnCosNameTable
OBJECT-TYPE
Table representing all of the defined class-of-service names for this node. The COS node and TG tables are accessed using the same index, which is the COS name.
1.3.6.1.4.1.2.6.2.13.6.2not-accessiblemandatory
ibmappnCosNameEntry
OBJECT-TYPE
The COS name is the index to this table.
1.3.6.1.4.1.2.6.2.13.6.2.1not-accessiblemandatory
ibmappnCosName
OBJECT-TYPE
Administratively-assigned name for this class of service.
1.3.6.1.4.1.2.6.2.13.6.2.1.1DisplayString (SIZE(1..8))read-onlymandatory
ibmappnCosTransPriority
OBJECT-TYPE
Transmission priority for this class of service. Values are: Low Medium High Network
1.3.6.1.4.1.2.6.2.13.6.2.1.2INTEGER {low(1), medium(2), high(3), network(4)}read-onlymandatory
ibmappnCosNodeRowTable
OBJECT-TYPE
This table contains all node-row information for all class of service in this node.
1.3.6.1.4.1.2.6.2.13.6.3not-accessiblemandatory
ibmappnCosNodeRowEntry
OBJECT-TYPE
The COS name is the first index and a integer is the second index to insure a unique index.
1.3.6.1.4.1.2.6.2.13.6.3.1not-accessiblemandatory
ibmappnCosNodeRowName
OBJECT-TYPE
Administratively-assigned name for this class of service.
1.3.6.1.4.1.2.6.2.13.6.3.1.1DisplayString (SIZE(1..8))read-onlymandatory
ibmappnCosNodeRowIndex
OBJECT-TYPE
Index of COS name. This same value is used to access the node and TG COS tables. Range of values is 0-255.
1.3.6.1.4.1.2.6.2.13.6.3.1.2INTEGER (0..255)read-onlymandatory
ibmappnCosNodeRowWgt
OBJECT-TYPE
Weight to be associated with the nodes that fit the criteria specified by this node row.
1.3.6.1.4.1.2.6.2.13.6.3.1.3DisplayStringread-onlymandatory
ibmappnCosNodeRowResistMin
OBJECT-TYPE
Minimum route addition resistance value for this node. Range of values is 0-255. The lower the value, the more desirable the node is for intermediate routing.
1.3.6.1.4.1.2.6.2.13.6.3.1.4INTEGER (0..255)read-onlymandatory
ibmappnCosNodeRowResistMax
OBJECT-TYPE
Maximum route addition resistance value for this node. Range of values is 0-255. The lower the value, the more desirable the node is for intermediate routing.
1.3.6.1.4.1.2.6.2.13.6.3.1.5INTEGER (0..255)read-onlymandatory
ibmappnCosNodeRowMinCongestAllow
OBJECT-TYPE
Indicates whether low congestion will be tolerated. The minimum and maximum parameters will allow specifying either low-congested, high-congested, or either to be used.
1.3.6.1.4.1.2.6.2.13.6.3.1.6INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnCosNodeRowMaxCongestAllow
OBJECT-TYPE
Indicates whether high congestion will be tolerated. The minimum and maximum parameters will allow specifying either low-congested, high-congested, or either to be used.
1.3.6.1.4.1.2.6.2.13.6.3.1.7INTEGER {yes(1), no(2)}read-onlymandatory
ibmappnCosTgRowTable
OBJECT-TYPE
Table containing all the Tg-row information for all class of service defined in this node.
1.3.6.1.4.1.2.6.2.13.6.4not-accessiblemandatory
ibmappnCosTgRowEntry
OBJECT-TYPE
The TgRowName and the TgRowIndex are the index for this table.
1.3.6.1.4.1.2.6.2.13.6.4.1not-accessiblemandatory
ibmappnCosTgRowName
OBJECT-TYPE
Administratively-assigned name for this class of service.
1.3.6.1.4.1.2.6.2.13.6.4.1.1DisplayString (SIZE(1..8))read-onlymandatory
ibmappnCosTgRowIndex
OBJECT-TYPE
Index of COS name. This same value is used to access the node and TG COS tables.
1.3.6.1.4.1.2.6.2.13.6.4.1.2INTEGER (0..255)read-onlymandatory
ibmappnCosTgRowWgt
OBJECT-TYPE
Weight to be associated with the nodes that fit the criteria specified by this tg-row.
1.3.6.1.4.1.2.6.2.13.6.4.1.3DisplayStringread-onlymandatory
ibmappnCosTgRowEffCapMin
OBJECT-TYPE
Minimum acceptable speed for this Class of Service. The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 603,979,776.
1.3.6.1.4.1.2.6.2.13.6.4.1.4INTEGERread-onlymandatory
ibmappnCosTgRowEffCapMax
OBJECT-TYPE
Maximum acceptable speed for this Class of Service. The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 603,979,776.
1.3.6.1.4.1.2.6.2.13.6.4.1.5INTEGERread-onlymandatory
ibmappnCosTgRowConnCostMin
OBJECT-TYPE
Minimum acceptable cost per connect time for this Class of Service. Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255.
1.3.6.1.4.1.2.6.2.13.6.4.1.6INTEGER (0..255)read-onlymandatory
ibmappnCosTgRowConnCostMax
OBJECT-TYPE
Maximum acceptable cost per connect time for this Class of Service. Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255.
1.3.6.1.4.1.2.6.2.13.6.4.1.7INTEGER (0..255)read-onlymandatory
ibmappnCosTgRowByteCostMin
OBJECT-TYPE
Minimum acceptable cost per byte for this Class of Service.
1.3.6.1.4.1.2.6.2.13.6.4.1.8INTEGER (0..255)read-onlymandatory
ibmappnCosTgRowByteCostMax
OBJECT-TYPE
Maximum acceptable cost per byte for this Class of Service.
1.3.6.1.4.1.2.6.2.13.6.4.1.9INTEGER (0..255)read-onlymandatory
ibmappnCosTgRowSecurityMin
OBJECT-TYPE
Minimum acceptable security for this Class of Service.
1.3.6.1.4.1.2.6.2.13.6.4.1.10INTEGER {nonsecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192)}read-onlymandatory
ibmappnCosTgRowSecurityMax
OBJECT-TYPE
Maximum acceptable security for this Class of Service.
1.3.6.1.4.1.2.6.2.13.6.4.1.11INTEGER {nonsecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192)}read-onlymandatory
ibmappnCosTgRowDelayMin
OBJECT-TYPE
Minimum acceptable propagation delay for this class of service. Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with the more values enumerated.
1.3.6.1.4.1.2.6.2.13.6.4.1.12INTEGER {minimum(0), negligible(384), terrestrial(9216), packet(147456), long(294912), maximum(2013265920)}read-onlymandatory
ibmappnCosTgRowDelayMax
OBJECT-TYPE
Maximum acceptable propagation delay for this class of service. Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with the more values enumerated.
1.3.6.1.4.1.2.6.2.13.6.4.1.13INTEGER {minimum(0), negligible(384), terrestrial(9216), packet(147456), long(294912), maximum(2013265920)}read-onlymandatory
ibmappnCosTgRowUsr1Min
OBJECT-TYPE
Minimum acceptable value for this user defined characteristic. Range of values is 0-255.
1.3.6.1.4.1.2.6.2.13.6.4.1.14INTEGER (0..255)read-onlymandatory
ibmappnCosTgRowUsr1Max
OBJECT-TYPE
Maximum acceptable value for this user defined characteristic. Range of values is 0-255.
1.3.6.1.4.1.2.6.2.13.6.4.1.15INTEGER (0..255)read-onlymandatory
ibmappnCosTgRowUsr2Min
OBJECT-TYPE
Minimum acceptable value for this user defined characteristic. Range of values is 0-255.
1.3.6.1.4.1.2.6.2.13.6.4.1.16INTEGER (0..255)read-onlymandatory
ibmappnCosTgRowUsr2Max
OBJECT-TYPE
A Maximum acceptable value for this user defined characteristic.
1.3.6.1.4.1.2.6.2.13.6.4.1.17INTEGER (0..255)read-onlymandatory
ibmappnCosTgRowUsr3Min
OBJECT-TYPE
Minimum acceptable value for this user defined characteristic. Range of values is 0-255.
1.3.6.1.4.1.2.6.2.13.6.4.1.18INTEGER (0..255)read-onlymandatory
ibmappnCosTgRowUsr3Max
OBJECT-TYPE
Maximum acceptable value for this user defined characteristic. Range of values is 0-255.
1.3.6.1.4.1.2.6.2.13.6.4.1.19INTEGER (0..255)read-onlymandatory