IANA-MAU-MIB
- Registered at
- 1.3.6.1.2.1.26.41.3.6.1.2.1.154
- Last updated
- 2026-07-15 00:00
- Organization
- IANA
- Revisions
- 2026-07-15 00:00, 2024-04-02 00:00, 2023-09-07 00:00, 2023-06-14 00:00, 2023-02-06 00:00, 2022-08-10 00:00, 2020-01-30 00:00, 2019-07-11 00:00, 2017-04-10 00:00, 2014-08-01 00:00, 2014-05-22 00:00, 2011-08-12 00:00, 2010-02-23 00:00, 2007-04-21 00:00
- Namespace
- standard
- Source file
IANA-MAU-MIB- Digest
sha256:310758ff69da3ea184fc35f86a9d9f94592f644c0e4aece33ec78bbced971bdc
Description
This MIB module defines dot3MauType OBJECT-IDENTITIES and IANAifMauListBits, IANAifMauMediaAvailable, IANAifMauAutoNegCapBits, and IANAifJackType TEXTUAL-CONVENTIONs, specifying enumerated values of the ifMauTypeListBits, ifMauMediaAvailable / rpMauMediaAvailable, ifMauAutoNegCapabilityBits / ifMauAutoNegCapAdvertisedBits / ifMauAutoNegCapReceivedBits and ifJackType / rpJackType objects respectively, defined in the MAU-MIB. It is intended that each new MAU type, Media Availability state, Auto Negotiation capability and/or Jack type defined by the IEEE 802.3 working group and approved for publication in a revision of IEEE Std 802.3 will be added to this MIB module, provided that it is suitable for being managed by the base objects in the MAU-MIB. An Expert Review, as defined in RFC 2434 [RFC2434], is REQUIRED for such additions. The following reference is used throughout this MIB module: [IEEE802.3] refers to IEEE Std 802.3-2022: 'IEEE Standard for Ethernet'. This reference should be updated as appropriate when new MAU types, Media Availability states, Auto Negotiation capabilities, and/or Jack types are added to this MIB module. Copyright (C) The IETF Trust (2007). The initial version of this MIB module was published in RFC 4836; for full legal notices see the RFC itself. Supplementary information may be available at: http://www.ietf.org/copyrights/ianamib.html
Contact
Internet Assigned Numbers Authority Postal: ICANN 12025 Waterfront Drive, Suite 300 Los Angeles, CA 90094-2536 Tel: +1-310-301-5800 EMail: iana&iana.org
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso, mib-2 |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANA-MAU-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| IANAifJackType TEXTUAL-CONVENTION Common enumeration values for repeater and interface MAU jack types. This data type is used as the syntax of the ifJackType and rpJackType objects in the (updated) definition of MAU-MIB's ifJackTable and rpJackTable respectively. Possible values are: other(1) - undefined or unknown rj45(2) - RJ45 rj45S(3) - RJ45 shielded db9(4) - DB9 bnc(5) - BNC fAUI(6) - AUI female mAUI(7) - AUI male fiberSC(8) - SC fiber fiberMIC(9) - MIC fiber fiberST(10) - ST fiber telco(11) - Telco mtrj(12) - MT-RJ fiber hssdc(13) - fiber channel style-2 fiberLC(14) - LC fiber cx4(15) - IB4X for 10GBASE-CX4 sfpPlusDA(16) - SFP+ Direct Attach for 10GE The most recent version of this textual convention is available in the online version of this MIB module on the IANA web site. Requests for new values should be made to IANA via email (iana&iana.org). | current | |||
| IANAifMauAutoNegCapBits TEXTUAL-CONVENTION This data type is used as the syntax of the ifMauAutoNegCapabilityBits, ifMauAutoNegCapAdvertisedBits, and ifMauAutoNegCapReceivedBits objects in the (updated) definition of MAU-MIB's ifMauAutoNegTable. The most recent version of this textual convention is available in the online version of this MIB module on the IANA web site. Requests for new values should be made to IANA via email (iana&iana.org). | current | |||
| IANAifMauMediaAvailable TEXTUAL-CONVENTION This data type is used as the syntax of the ifMauMediaAvailable and rpMauMediaAvailable objects in the (updated) definition of MAU-MIB's ifMauTable and rpMauTable respectively. Possible values are: other(1) - undefined (not listed below) unknown(2) - MAU's true state is unknown; e.g., during initialization available(3) - link, light, or loopback is normal notAvailable(4) - link loss, low light, or no loopback remoteFault(5) - a fault has been detected at the remote end of the link. This value applies to 10BASE-FB, 100BASE-T4 Far End Fault Indication and non-specified remote faults from a system running auto-negotiation invalidSignal(6) - invalid signal has been received from the other end of the link, 10BASE-FB only remoteJabber(7) - remote fault, due to jabber remoteLinkLoss(8) - remote fault, due to link loss remoteTest(9) - remote fault, due to test offline(10) - offline, Clause 37 Auto-Negotiation only autoNegError(11) - Auto-Negotiation Error, Clause 37 Auto-Negotiation only pmdLinkFault(12) - PMA/PMD receive link fault. In case of PAF (2BASE-TL / 10PASS-TS PHYs), all PMEs in the aggregation group have detected a link fault wisFrameLoss(13) - WIS loss of frame, 10GBASE-W only wisSignalLoss(14) - WIS loss of signal, 10GBASE-W only pcsLinkFault(15) - PCS receive link fault excessiveBER(16) - PCS Bit Error Ratio monitor reporting excessive error ratio dxsLinkFault(17) - DTE XGXS receive link fault, XAUI only pxsLinkFault(18) - PHY XGXS receive link fault, XAUI only availableReduced(19) - link normal, reduced bandwidth, 2BASE-TL / 10PASS-TS only ready(20) - at least one PME in the aggregation group is detecting handshake tones, 2BASE-TL / 10PASS-TS only If the MAU is a 10M b/s link or fiber type (FOIRL, 10BASE-T, 10BASE-F), then this is equivalent to the link test fail state/low light function. For an AUI, 10BASE2, 10BASE5, or 10BROAD36 MAU, this indicates whether loopback is detected on the DI circuit. The value of this attribute persists between packets for MAU types AUI, 10BASE5, 10BASE2, 10BROAD36, and 10BASEFP. At power-up or following a reset, the Media Available state will be unknown(2) for AUI, 10BASE5, 10BASE2, 10BROAD36, and 10BASE-FP MAUs. For these MAUs loopback will be tested on each transmission during which no collision is detected. If DI is receiving input when DO returns to IDL after a transmission and there has been no collision during the transmission, then loopback will be detected. The Media Available state will only change during noncollided transmissions for AUI, 10BASE2, 10BASE5, 10BROAD36, and 10BASE-FP MAUs. For 100BASE-T2, 100BASE-T4, 100BASE-TX, 100BASE-FX, 100BASE-LX10, and 100BASE-BX10 PHYs the enumerations match the states within the link integrity state diagram. Any MAU that implements management of [IEEE802.3] Clause 28 Auto-Negotiation, will map remote fault indication to remoteFault(5). Any MAU that implements management of Clause 37 Auto-Negotiation, will map the received RF1 and RF2 bits as follows: Offline maps to offline(10), Link_Failure maps to remoteFault(5), and Auto-Negotiation Error maps to autoNegError(11). The value remoteFault(5) applies to 10BASE-FB remote fault indication, the 100BASE-X far-end fault indication, and nonspecified remote faults from a system running Clause 28 Auto-Negotiation. The value remoteJabber(7), remoteLink loss(8), or remoteTest(9) SHOULD be used instead of remoteFault(5) where the reason for remote fault is identified in the remote signaling protocol. Where a Clause 22 MII or Clause 35 GMII is present, a logic one in the remote fault bit maps to the value remoteFault(5), a logic zero in the link status bit maps to the enumeration notAvailable(4). The value notAvailable(4) takes precedence over remoteFault(5). For 2BASE-TL and 10PASS-TS PHYs, the value unknown(2) maps to the condition where the PHY (PCS with connected PMEs) is initializing, the value ready(20) maps to the condition where the interface is down and at least one PME in the aggregation group is ready for handshake, the value available(3) maps to the condition where all the PMEs in the aggregation group are up, the value notAvailable(4) maps to the condition where all the PMEs in the aggregation group are down and no handshake tones are detected, the value availableReduced(19) maps to the condition where the interface is up, a link fault is detected at the receive direction by one or more PMEs in the aggregation group, but at least one PME is up and the enumeration pmdLinkFault(12) maps to the condition where a link fault is detected at the receive direction by all of the PMEs in the aggregation group. For 10 Gb/s the enumerations map to value of the link_fault variable within the Link Fault Signaling state diagram as follows: the value OK maps to the value available(3), the value Local Fault maps to the value notAvailable(4), and the value Remote Fault maps to the value remoteFault(5). The value pmdLinkFault(12), wisFrameLoss(13), wisSignalLoss(14), pcsLinkFault(15), excessiveBER(16), or dxsLinkFault(17) SHOULD be used instead of the value notAvailable(4), where the reason for the Local Fault state can be identified through the use of the Clause 45 MDIO Interface. Where multiple reasons for the Local Fault state can be identified, only the highest precedence error SHOULD be reported. This precedence in descending order is as follows: pxsLinkFault pmdLinkFault wisFrameLoss wisSignalLoss pcsLinkFault excessiveBER dxsLinkFault. Where a Clause 45 MDIO interface is present a logic zero in the PMA/PMD Receive link status bit ([IEEE802.3] Section 45.2.1.2.2) maps to the value pmdLinkFault(12), logic one in the LOF status bit (Section 45.2.2.10.4) maps to the value wisFrameLoss(13), a logic one in the LOS status bit (Section 45.2.2.10.5) maps to the value wisSignalLoss, a logic zero in the PCS Receive link status bit (Section 45.2.3.2.2) maps to the value pcsLinkFault(15), a logic one in the 10GBASE-R PCS Latched high BER status bit (Section 45.2.3.12.2) maps to the value excessiveBER, a logic zero in the DTE XS receive link status bit (Section 45.2.5.2.2) maps to the value dxsLinkFault(17) and a logic zero in the PHY XS transmit link status bit (Section 45.2.4.2.2) maps to the value pxsLinkFault(18). The most recent version of this textual convention is available in the online version of this MIB module on the IANA web site. Requests for new values should be made to IANA via email (iana&iana.org). | current | |||
| IANAifMauTypeListBits TEXTUAL-CONVENTION This data type is used as the syntax of the ifMauTypeListBits object in the (updated) definition of MAU-MIB's ifMauTable. The most recent version of this textual convention is available in the online version of this MIB module on the IANA web site. Requests for new values should be made to IANA via email (iana&iana.org). Note that changes in this textual convention SHALL be synchronized with relevant changes in the dot3MauType OBJECT-IDENTITIES. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| dot3MauType OBJECT-IDENTITY | 1.3.6.1.2.1.26.4 | |||
| dot3MauTypeAUI OBJECT-IDENTITY no internal MAU, view from AUI | 1.3.6.1.2.1.26.4.1 | current | ||
| dot3MauType10Base5 OBJECT-IDENTITY thick coax MAU | 1.3.6.1.2.1.26.4.2 | current | ||
| dot3MauTypeFoirl OBJECT-IDENTITY FOIRL MAU | 1.3.6.1.2.1.26.4.3 | current | ||
| dot3MauType10Base2 OBJECT-IDENTITY thin coax MAU | 1.3.6.1.2.1.26.4.4 | current | ||
| dot3MauType10BaseT OBJECT-IDENTITY UTP MAU. Note that it is strongly recommended that agents return either dot3MauType10BaseTHD or dot3MauType10BaseTFD if the duplex mode is known. However, management applications should be prepared to receive this MAU type value from older agent implementations. | 1.3.6.1.2.1.26.4.5 | current | ||
| dot3MauType10BaseFP OBJECT-IDENTITY passive fiber MAU | 1.3.6.1.2.1.26.4.6 | current | ||
| dot3MauType10BaseFB OBJECT-IDENTITY sync fiber MAU | 1.3.6.1.2.1.26.4.7 | current | ||
| dot3MauType10BaseFL OBJECT-IDENTITY async fiber MAU. Note that it is strongly recommended that agents return either dot3MauType10BaseFLHD or dot3MauType10BaseFLFD if the duplex mode is known. However, management applications should be prepared to receive this MAU type value from older agent implementations. | 1.3.6.1.2.1.26.4.8 | current | ||
| dot3MauType10Broad36 OBJECT-IDENTITY broadband DTE MAU. Note that 10BROAD36 MAUs can be attached to interfaces but not to repeaters. | 1.3.6.1.2.1.26.4.9 | current | ||
| dot3MauType10BaseTHD OBJECT-IDENTITY UTP MAU, half duplex mode | 1.3.6.1.2.1.26.4.10 | current | ||
| dot3MauType10BaseTFD OBJECT-IDENTITY UTP MAU, full duplex mode | 1.3.6.1.2.1.26.4.11 | current | ||
| dot3MauType10BaseFLHD OBJECT-IDENTITY async fiber MAU, half duplex mode | 1.3.6.1.2.1.26.4.12 | current | ||
| dot3MauType10BaseFLFD OBJECT-IDENTITY async fiber MAU, full duplex mode | 1.3.6.1.2.1.26.4.13 | current | ||
| dot3MauType100BaseT4 OBJECT-IDENTITY 4 pair category 3 UTP | 1.3.6.1.2.1.26.4.14 | current | ||
| dot3MauType100BaseTXHD OBJECT-IDENTITY 2 pair category 5 UTP, half duplex mode | 1.3.6.1.2.1.26.4.15 | current | ||
| dot3MauType100BaseTXFD OBJECT-IDENTITY 2 pair category 5 UTP, full duplex mode | 1.3.6.1.2.1.26.4.16 | current | ||
| dot3MauType100BaseFXHD OBJECT-IDENTITY X fiber over PMT, half duplex mode | 1.3.6.1.2.1.26.4.17 | current | ||
| dot3MauType100BaseFXFD OBJECT-IDENTITY X fiber over PMT, full duplex mode | 1.3.6.1.2.1.26.4.18 | current | ||
| dot3MauType100BaseT2HD OBJECT-IDENTITY 2 pair category 3 UTP, half duplex mode | 1.3.6.1.2.1.26.4.19 | current | ||
| dot3MauType100BaseT2FD OBJECT-IDENTITY 2 pair category 3 UTP, full duplex mode | 1.3.6.1.2.1.26.4.20 | current | ||
| dot3MauType1000BaseXHD OBJECT-IDENTITY PCS/PMA, unknown PMD, half duplex mode | 1.3.6.1.2.1.26.4.21 | current | ||
| dot3MauType1000BaseXFD OBJECT-IDENTITY PCS/PMA, unknown PMD, full duplex mode | 1.3.6.1.2.1.26.4.22 | current | ||
| dot3MauType1000BaseLXHD OBJECT-IDENTITY Fiber over long-wavelength laser, half duplex mode | 1.3.6.1.2.1.26.4.23 | current | ||
| dot3MauType1000BaseLXFD OBJECT-IDENTITY Fiber over long-wavelength laser, full duplex mode | 1.3.6.1.2.1.26.4.24 | current | ||
| dot3MauType1000BaseSXHD OBJECT-IDENTITY Fiber over short-wavelength laser, half duplex mode | 1.3.6.1.2.1.26.4.25 | current | ||
| dot3MauType1000BaseSXFD OBJECT-IDENTITY Fiber over short-wavelength laser, full duplex mode | 1.3.6.1.2.1.26.4.26 | current | ||
| dot3MauType1000BaseCXHD OBJECT-IDENTITY Copper over 150-Ohm balanced cable, half duplex mode | 1.3.6.1.2.1.26.4.27 | current | ||
| dot3MauType1000BaseCXFD OBJECT-IDENTITY Copper over 150-Ohm balanced cable, full duplex mode | 1.3.6.1.2.1.26.4.28 | current | ||
| dot3MauType1000BaseTHD OBJECT-IDENTITY Four-pair Category 5 UTP, half duplex mode | 1.3.6.1.2.1.26.4.29 | current | ||
| dot3MauType1000BaseTFD OBJECT-IDENTITY Four-pair Category 5 UTP, full duplex mode | 1.3.6.1.2.1.26.4.30 | current | ||
| dot3MauType10GigBaseX OBJECT-IDENTITY X PCS/PMA, unknown PMD. | 1.3.6.1.2.1.26.4.31 | current | ||
| dot3MauType10GigBaseLX4 OBJECT-IDENTITY X fiber over WWDM optics | 1.3.6.1.2.1.26.4.32 | current | ||
| dot3MauType10GigBaseR OBJECT-IDENTITY R PCS/PMA, unknown PMD. | 1.3.6.1.2.1.26.4.33 | current | ||
| dot3MauType10GigBaseER OBJECT-IDENTITY R fiber over 1550 nm optics | 1.3.6.1.2.1.26.4.34 | current | ||
| dot3MauType10GigBaseLR OBJECT-IDENTITY R fiber over 1310 nm optics | 1.3.6.1.2.1.26.4.35 | current | ||
| dot3MauType10GigBaseSR OBJECT-IDENTITY R fiber over 850 nm optics | 1.3.6.1.2.1.26.4.36 | current | ||
| dot3MauType10GigBaseW OBJECT-IDENTITY W PCS/PMA, unknown PMD. | 1.3.6.1.2.1.26.4.37 | current | ||
| dot3MauType10GigBaseEW OBJECT-IDENTITY W fiber over 1550 nm optics | 1.3.6.1.2.1.26.4.38 | current | ||
| dot3MauType10GigBaseLW OBJECT-IDENTITY W fiber over 1310 nm optics | 1.3.6.1.2.1.26.4.39 | current | ||
| dot3MauType10GigBaseSW OBJECT-IDENTITY W fiber over 850 nm optics | 1.3.6.1.2.1.26.4.40 | current | ||
| dot3MauType10GigBaseCX4 OBJECT-IDENTITY X copper over 8 pair 100-Ohm balanced cable | 1.3.6.1.2.1.26.4.41 | current | ||
| dot3MauType2BaseTL OBJECT-IDENTITY Voice grade UTP copper, up to 2700m, optional PAF | 1.3.6.1.2.1.26.4.42 | current | ||
| dot3MauType10PassTS OBJECT-IDENTITY Voice grade UTP copper, up to 750m, optional PAF | 1.3.6.1.2.1.26.4.43 | current | ||
| dot3MauType100BaseBX10D OBJECT-IDENTITY One single-mode fiber OLT, long wavelength, 10km | 1.3.6.1.2.1.26.4.44 | current | ||
| dot3MauType100BaseBX10U OBJECT-IDENTITY One single-mode fiber ONU, long wavelength, 10km | 1.3.6.1.2.1.26.4.45 | current | ||
| dot3MauType100BaseLX10 OBJECT-IDENTITY Two single-mode fibers, long wavelength, 10km | 1.3.6.1.2.1.26.4.46 | current | ||
| dot3MauType1000BaseBX10D OBJECT-IDENTITY One single-mode fiber OLT, long wavelength, 10km | 1.3.6.1.2.1.26.4.47 | current | ||
| dot3MauType1000BaseBX10U OBJECT-IDENTITY One single-mode fiber ONU, long wavelength, 10km | 1.3.6.1.2.1.26.4.48 | current | ||
| dot3MauType1000BaseLX10 OBJECT-IDENTITY Two sigle-mode fiber, long wavelength, 10km | 1.3.6.1.2.1.26.4.49 | current | ||
| dot3MauType1000BasePX10D OBJECT-IDENTITY One single-mode fiber EPON OLT, 10km | 1.3.6.1.2.1.26.4.50 | current | ||
| dot3MauType1000BasePX10U OBJECT-IDENTITY One single-mode fiber EPON ONU, 10km | 1.3.6.1.2.1.26.4.51 | current | ||
| dot3MauType1000BasePX20D OBJECT-IDENTITY One single-mode fiber EPON OLT, 20km | 1.3.6.1.2.1.26.4.52 | current | ||
| dot3MauType1000BasePX20U OBJECT-IDENTITY One single-mode fiber EPON ONU, 20km | 1.3.6.1.2.1.26.4.53 | current | ||
| dot3MauType10GbaseT OBJECT-IDENTITY Four-pair Category 6A or better, full duplex mode only | 1.3.6.1.2.1.26.4.54 | current | ||
| dot3MauType10GbaseLRM OBJECT-IDENTITY R multimode fiber over 1310 nm optics | 1.3.6.1.2.1.26.4.55 | current | ||
| dot3MauType1000baseKX OBJECT-IDENTITY X backplane, full duplex mode only | 1.3.6.1.2.1.26.4.56 | current | ||
| dot3MauType10GbaseKX4 OBJECT-IDENTITY 4 lane X backplane, full duplex mode only | 1.3.6.1.2.1.26.4.57 | current | ||
| dot3MauType10GbaseKR OBJECT-IDENTITY R backplane, full duplex mode only | 1.3.6.1.2.1.26.4.58 | current | ||
| dot3MauType10G1GbasePRXD1 OBJECT-IDENTITY One single-mode fiber asymmetric-rate EPON OLT, supporting low power budget (PRX10) | 1.3.6.1.2.1.26.4.59 | current | ||
| dot3MauType10G1GbasePRXD2 OBJECT-IDENTITY One single-mode fiber asymmetric-rate EPON OLT, supporting medium power budget (PRX20) | 1.3.6.1.2.1.26.4.60 | current | ||
| dot3MauType10G1GbasePRXD3 OBJECT-IDENTITY One single-mode fiber asymmetric-rate EPON OLT, supporting high power budget (PRX30) | 1.3.6.1.2.1.26.4.61 | current | ||
| dot3MauType10G1GbasePRXU1 OBJECT-IDENTITY One single-mode fiber asymmetric-rate EPON ONU, supporting low power budget (PRX10) | 1.3.6.1.2.1.26.4.62 | current | ||
| dot3MauType10G1GbasePRXU2 OBJECT-IDENTITY One single-mode fiber asymmetric-rate EPON ONU, supporting medium power budget (PRX20) | 1.3.6.1.2.1.26.4.63 | current | ||
| dot3MauType10G1GbasePRXU3 OBJECT-IDENTITY One single-mode fiber asymmetric-rate EPON ONU, supporting high power budget (PRX30) | 1.3.6.1.2.1.26.4.64 | current | ||
| dot3MauType10GbasePRD1 OBJECT-IDENTITY One single-mode fiber symmetric-rate EPON OLT, supporting low power budget (PR10) | 1.3.6.1.2.1.26.4.65 | current | ||
| dot3MauType10GbasePRD2 OBJECT-IDENTITY One single-mode fiber symmetric-rate EPON OLT, supporting medium power budget (PR20) | 1.3.6.1.2.1.26.4.66 | current | ||
| dot3MauType10GbasePRD3 OBJECT-IDENTITY One single-mode fiber symmetric-rate EPON OLT, supporting high power budget (PR30) | 1.3.6.1.2.1.26.4.67 | current | ||
| dot3MauType10GbasePRU1 OBJECT-IDENTITY One single-mode fiber symmetric-rate EPON ONU, supporting low and medium power budget (PR10 and PR20) | 1.3.6.1.2.1.26.4.68 | current | ||
| dot3MauType10GbasePRU3 OBJECT-IDENTITY One single-mode fiber symmetric-rate EPON ONU, supporting high power budget (PR30) | 1.3.6.1.2.1.26.4.69 | current | ||
| dot3MauType40GbaseKR4 OBJECT-IDENTITY 40GBASE-R PCS/PMA over an electrical backplane | 1.3.6.1.2.1.26.4.70 | current | ||
| dot3MauType40GbaseCR4 OBJECT-IDENTITY 40GBASE-R PCS/PMA over 4 lane shielded copper balanced cable | 1.3.6.1.2.1.26.4.71 | current | ||
| dot3MauType40GbaseSR4 OBJECT-IDENTITY 40GBASE-R PCS/PMA over 4 lane multimode fiber | 1.3.6.1.2.1.26.4.72 | current | ||
| dot3MauType40GbaseFR OBJECT-IDENTITY 40GBASE-R PCS/PMA over single mode fiber | 1.3.6.1.2.1.26.4.73 | current | ||
| dot3MauType40GbaseLR4 OBJECT-IDENTITY 40GBASE-R PCS/PMA over 4 WDM lane single mode fiber | 1.3.6.1.2.1.26.4.74 | current | ||
| dot3MauType100GbaseCR10 OBJECT-IDENTITY 100GBASE-R PCS/PMA over 10 lane shielded copper balanced cable | 1.3.6.1.2.1.26.4.75 | current | ||
| dot3MauType100GbaseSR10 OBJECT-IDENTITY 100GBASE-R PCS/PMA over 10 lane multimode fiber | 1.3.6.1.2.1.26.4.76 | current | ||
| dot3MauType100GbaseLR4 OBJECT-IDENTITY 100GBASE-R PCS/PMA over 4 WDM lane single mode fiber, long reach | 1.3.6.1.2.1.26.4.77 | current | ||
| dot3MauType100GbaseER4 OBJECT-IDENTITY 100GBASE-R PCS/PMA over 4 WDM lane single mode fiber PMD, extended reach | 1.3.6.1.2.1.26.4.78 | current | ||
| dot3MauType1000baseT1 OBJECT-IDENTITY 1000BASE-T1 single balanced twisted-pair copper cabling PHY | 1.3.6.1.2.1.26.4.79 | current | ||
| dot3MauType1000basePX30D OBJECT-IDENTITY One single-mode fiber EPON OLT, 20km, 1:32 split ratio | 1.3.6.1.2.1.26.4.80 | current | ||
| dot3MauType1000basePX30U OBJECT-IDENTITY One single-mode fiber EPON ONU, 20km, 1:32 split ratio | 1.3.6.1.2.1.26.4.81 | current | ||
| dot3MauType1000basePX40D OBJECT-IDENTITY One single-mode fiber EPON OLT, 20km, 1:64 split ratio | 1.3.6.1.2.1.26.4.82 | current | ||
| dot3MauType1000basePX40U OBJECT-IDENTITY One single-mode fiber EPON ONU, 20km, 1:64 split ratio | 1.3.6.1.2.1.26.4.83 | current | ||
| dot3MauType10G1GbasePRXD4 OBJECT-IDENTITY One single-mode fiber asymmetric-rate EPON OLT, supporting extended power budget (PRX40) | 1.3.6.1.2.1.26.4.84 | current | ||
| dot3MauType10G1GbasePRXU4 OBJECT-IDENTITY One single-mode fiber asymmetric-rate EPON ONU, supporting extended power budget (PRX40) | 1.3.6.1.2.1.26.4.85 | current | ||
| dot3MauType10GbasePRD4 OBJECT-IDENTITY One single-mode fiber symmetric-rate EPON OLT, supporting extended power budget (PR40) | 1.3.6.1.2.1.26.4.86 | current | ||
| dot3MauType10GbasePRU4 OBJECT-IDENTITY One single-mode fiber symmetric-rate EPON ONU, supporting extended power budget (PR40) | 1.3.6.1.2.1.26.4.87 | current | ||
| dot3MauType25GbaseCR OBJECT-IDENTITY 25GBASE-R PCS/PMA over shielded balanced copper cable | 1.3.6.1.2.1.26.4.88 | current | ||
| dot3MauType25GbaseCRS OBJECT-IDENTITY 25GBASE-R PCS/PMA over shielded balanced copper cable without RS-FEC | 1.3.6.1.2.1.26.4.89 | current | ||
| dot3MauType25GbaseKR OBJECT-IDENTITY 25GBASE-R PCS/PMA over an electrical backplane | 1.3.6.1.2.1.26.4.90 | current | ||
| dot3MauType25GbaseKRS OBJECT-IDENTITY 25GBASE-R PCS/PMA over an electrical backplane without RS-FEC | 1.3.6.1.2.1.26.4.91 | current | ||
| dot3MauType25GbaseR OBJECT-IDENTITY 25GBASE-R PCS/PMA over undefined PMD | 1.3.6.1.2.1.26.4.92 | current | ||
| dot3MauType25GbaseSR OBJECT-IDENTITY 25GBASE-R PCS/PMA over multimode fiber | 1.3.6.1.2.1.26.4.93 | current | ||
| dot3MauType25GbaseT OBJECT-IDENTITY Four-pair twisted-pair balanced copper cabling | 1.3.6.1.2.1.26.4.94 | current | ||
| dot3MauType40GbaseER4 OBJECT-IDENTITY 40GBASE-R PCS/PMA over 4 WDM lane single mode fiber | 1.3.6.1.2.1.26.4.95 | current | ||
| dot3MauType40GbaseR OBJECT-IDENTITY 40GBASE-R PCS as over undefined PMA/PMD | 1.3.6.1.2.1.26.4.96 | current | ||
| dot3MauType40GbaseT OBJECT-IDENTITY Four-pair twisted-pair balanced copper cabling | 1.3.6.1.2.1.26.4.97 | current | ||
| dot3MauType100GbaseCR4 OBJECT-IDENTITY 100GBASE-R PCS/PMA over 4 lane shielded copper balanced cable | 1.3.6.1.2.1.26.4.98 | current | ||
| dot3MauType100GbaseKR4 OBJECT-IDENTITY 100GBASE-R PCS/PMA over an electrical backplane | 1.3.6.1.2.1.26.4.99 | current | ||
| dot3MauType100GbaseKP4 OBJECT-IDENTITY 100GBASE-P PCS/PMA over an electrical backplane PMD | 1.3.6.1.2.1.26.4.100 | current | ||
| dot3MauType100GbaseR OBJECT-IDENTITY 100GBASE-R Multi-lane PCS over undefined PMA/PMD | 1.3.6.1.2.1.26.4.101 | current | ||
| dot3MauType100GbaseSR4 OBJECT-IDENTITY 100GBASE-R PCS/PMA over 4 lane multimode fiber | 1.3.6.1.2.1.26.4.102 | current | ||
| dot3MauType2p5GigT OBJECT-IDENTITY 2.5GBASE-T Four-pair twisted-pair balanced copper cabling PHY | 1.3.6.1.2.1.26.4.103 | current | ||
| dot3MauType5GigT OBJECT-IDENTITY 5GBASE-T Four-pair twisted-pair balanced copper cabling PHY | 1.3.6.1.2.1.26.4.104 | current | ||
| dot3MauType100baseT1 OBJECT-IDENTITY 100BASE-T1 Single balanced twisted-pair copper cabling PHY | 1.3.6.1.2.1.26.4.105 | current | ||
| dot3MauType1000baseRHA OBJECT-IDENTITY 1000BASE-RHA Plastic optical fiber PHY | 1.3.6.1.2.1.26.4.106 | current | ||
| dot3MauType1000baseRHB OBJECT-IDENTITY 1000BASE-RHB Plastic optical fiber PHY | 1.3.6.1.2.1.26.4.107 | current | ||
| dot3MauType1000baseRHC OBJECT-IDENTITY 1000BASE-RHC Plastic optical fiber PHY | 1.3.6.1.2.1.26.4.108 | current | ||
| dot3MauType2p5GbaseKX OBJECT-IDENTITY 2.5GBASE-X PMD over an electrical backplane | 1.3.6.1.2.1.26.4.109 | current | ||
| dot3MauType2p5GbaseX OBJECT-IDENTITY 2.5GBASE-X PCS/PMA over undefined PMD | 1.3.6.1.2.1.26.4.110 | current | ||
| dot3MauType5GbaseKR OBJECT-IDENTITY 5GBASE-KR PMD over an electrical backplane | 1.3.6.1.2.1.26.4.111 | current | ||
| dot3MauType5GbaseR OBJECT-IDENTITY 5GBASE-R PCS/PMA over undefined PMD | 1.3.6.1.2.1.26.4.112 | current | ||
| dot3MauType10GpassXR OBJECT-IDENTITY Coax cable distribution network PHY continuous downstream/burst mode upstream PHY | 1.3.6.1.2.1.26.4.113 | current | ||
| dot3MauType25GbaseLR OBJECT-IDENTITY 25GBASE-R PCS/PMA over single-mode fiber PMD, with long reach | 1.3.6.1.2.1.26.4.114 | current | ||
| dot3MauType25GbaseER OBJECT-IDENTITY 25GBASE-R PCS/PMA over single-mode fiber PMD, with extended reach | 1.3.6.1.2.1.26.4.115 | current | ||
| dot3MauType50GbaseR OBJECT-IDENTITY 50GBASE-R Multi-lane PCS over undefined PMA/PMD | 1.3.6.1.2.1.26.4.116 | current | ||
| dot3MauType50GbaseCR OBJECT-IDENTITY 50GBASE-R PCS/PMA over shielded copper balanced cable PMD | 1.3.6.1.2.1.26.4.117 | current | ||
| dot3MauType50GbaseKR OBJECT-IDENTITY 50GBASE-R PCS/PMA over an electrical backplane PMD | 1.3.6.1.2.1.26.4.118 | current | ||
| dot3MauType50GbaseSR OBJECT-IDENTITY 50GBASE-R PCS/PMA over multimode fiber PMD | 1.3.6.1.2.1.26.4.119 | current | ||
| dot3MauType50GbaseFR OBJECT-IDENTITY 50GBASE-R PCS/PMA over single mode fiber PMD with reach up to at least 2 km | 1.3.6.1.2.1.26.4.120 | current | ||
| dot3MauType50GbaseLR OBJECT-IDENTITY 50GBASE-R PCS/PMA over single mode fiber PMD with reach up to at least 10 km | 1.3.6.1.2.1.26.4.121 | current | ||
| dot3MauType50GbaseER OBJECT-IDENTITY 50GBASE-R PCS/PMA over single-mode fiber PMD with reach up to at least 40 km | 1.3.6.1.2.1.26.4.122 | current | ||
| dot3MauType100GbaseCR2 OBJECT-IDENTITY 100GBASE-R PCS/PMA over 2 lane shielded copper balanced cable PMD | 1.3.6.1.2.1.26.4.123 | current | ||
| dot3MauType100GbaseKR2 OBJECT-IDENTITY 100GBASE-R PCS/PMA over an electrical backplane PMD | 1.3.6.1.2.1.26.4.124 | current | ||
| dot3MauType100GbaseSR2 OBJECT-IDENTITY 100GBASE-R PCS/PMA over 2 lane multimode fiber PMD | 1.3.6.1.2.1.26.4.125 | current | ||
| dot3MauType100GbaseDR OBJECT-IDENTITY 100GBASE-R PCS/PMA over single mode fiber PMD | 1.3.6.1.2.1.26.4.126 | current | ||
| dot3MauType200GbaseR OBJECT-IDENTITY 200GBASE-R Multi-lane PCS over undefined PMA/PMD | 1.3.6.1.2.1.26.4.127 | current | ||
| dot3MauType200GbaseDR4 OBJECT-IDENTITY 200GBASE-R PCS/PMA over 4-lane single-mode fiber PMD | 1.3.6.1.2.1.26.4.128 | current | ||
| dot3MauType200GbaseFR4 OBJECT-IDENTITY 200GBASE-R PCS/PMA over 4 WDM lane single-mode fiber PMD with reach up to at least 2 km | 1.3.6.1.2.1.26.4.129 | current | ||
| dot3MauType200GbaseLR4 OBJECT-IDENTITY 200GBASE-R PCS/PMA over 4 WDM lane single-mode fiber PMD with reach up to at least 10 km | 1.3.6.1.2.1.26.4.130 | current | ||
| dot3MauType200GbaseCR4 OBJECT-IDENTITY 200GBASE-R PCS/PMA over 4 lane shielded copper balanced cable PMD | 1.3.6.1.2.1.26.4.131 | current | ||
| dot3MauType200GbaseKR4 OBJECT-IDENTITY 200GBASE-R PCS/PMA over an electrical backplane PMD | 1.3.6.1.2.1.26.4.132 | current | ||
| dot3MauType200GbaseSR4 OBJECT-IDENTITY 200GBASE-R PCS/PMA over 4 lane multimode fiber PMD | 1.3.6.1.2.1.26.4.133 | current | ||
| dot3MauType200GbaseER4 OBJECT-IDENTITY 200GBASE-R PCS/PMA over 4 WDM lane single-mode fiber PMD with reach up to at least 40 km | 1.3.6.1.2.1.26.4.134 | current | ||
| dot3MauType400GbaseR OBJECT-IDENTITY 400GBASE-R Multi-lane PCS over undefined PMA/PMD | 1.3.6.1.2.1.26.4.135 | current | ||
| dot3MauType400GbaseSR16 OBJECT-IDENTITY 400GBASE-R PCS/PMA over 16-lane multimode fiber PMD | 1.3.6.1.2.1.26.4.136 | current | ||
| dot3MauType400GbaseDR4 OBJECT-IDENTITY 400GBASE-R PCS/PMA over 4-lane single-mode fiber PMD | 1.3.6.1.2.1.26.4.137 | current | ||
| dot3MauType400GbaseFR8 OBJECT-IDENTITY 400GBASE-R PCS/PMA over 8 WDM lane single-mode fiber PMD with reach up to at least 2 km | 1.3.6.1.2.1.26.4.138 | current | ||
| dot3MauType400GbaseLR8 OBJECT-IDENTITY 400GBASE-R PCS/PMA over 8 WDM lane single-mode fiber PMD with reach up to at least 10 km | 1.3.6.1.2.1.26.4.139 | current | ||
| dot3MauType400GbaseER8 OBJECT-IDENTITY 400GBASE-R PCS/PMA over 8 WDM lane single-mode fiber PMD with reach up to at least 40 km | 1.3.6.1.2.1.26.4.140 | current | ||
| dot3MauType10baseT1L OBJECT-IDENTITY 10BASE-T1L Single balanced pair PHY | 1.3.6.1.2.1.26.4.141 | current | ||
| dot3MauType10baseT1SHD OBJECT-IDENTITY 10BASE-T1S Single balanced pair PHY, half duplex mode | 1.3.6.1.2.1.26.4.142 | current | ||
| dot3MauType10baseT1SMD OBJECT-IDENTITY 10BASE-T1S Single balanced pair PHY, multidrop mode | 1.3.6.1.2.1.26.4.143 | current | ||
| dot3MauType10baseT1SFD OBJECT-IDENTITY 10BASE-T1S Single balanced pair PHY, full duplex mode | 1.3.6.1.2.1.26.4.144 | current | ||
| dot3MauType100GbaseFR1 OBJECT-IDENTITY 100GBASE-R PCS/PMA over single-mode fiber PMD with reach up to at least 2 km | 1.3.6.1.2.1.26.4.145 | current | ||
| dot3MauType100GbaseLR1 OBJECT-IDENTITY 100GBASE-R PCS/PMA over single-mode fiber PMD with reach up to at least 10 km | 1.3.6.1.2.1.26.4.146 | current | ||
| dot3MauType400GbaseFR4 OBJECT-IDENTITY 400GBASE-R PCS/PMA over 4 WDM lane single-mode fiber PMD with reach up to at least 2 km | 1.3.6.1.2.1.26.4.147 | current | ||
| dot3MauType400GbaseLR46 OBJECT-IDENTITY 400GBASE-R PCS/PMA over 4 WDM lane single-mode fiber PMD with reach up to at least 6 km | 1.3.6.1.2.1.26.4.148 | current | ||
| dot3MauType400GbaseSR8 OBJECT-IDENTITY 400GBASE-R PCS/PMA over 8-lane multimode fiber PMD as specified in Clause 138 | 1.3.6.1.2.1.26.4.149 | current | ||
| dot3MauType400GbaseSR4p2 OBJECT-IDENTITY 400GBASE-R PCS/PMA over 8-lane multimode fiber PMD as specified in Clause 150 | 1.3.6.1.2.1.26.4.150 | current | ||
| dot3MauType2p5GbaseT1 OBJECT-IDENTITY Single balanced pair of conductors PHY as specified in Clause 149 | 1.3.6.1.2.1.26.4.151 | current | ||
| dot3MauType5GbaseT1 OBJECT-IDENTITY Single balanced pair of conductors PHY as specified in Clause 149 | 1.3.6.1.2.1.26.4.152 | current | ||
| dot3MauType10GbaseT1 OBJECT-IDENTITY Single balanced pair of conductors PHY as specified in Clause 149 | 1.3.6.1.2.1.26.4.153 | current | ||
| dot3MauType25G10GbasePQGD2 OBJECT-IDENTITY One single mode fiber, 1 x 25.78125 GBd continuous transmission / 1 x 10.3125 GBd burst mode reception, medium power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.154 | current | ||
| dot3MauType25G10GbasePQGD3 OBJECT-IDENTITY One single mode fiber, 1 x 25.78125 GBd continuous transmission / 1 x 10.3125 GBd burst mode reception, high power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.155 | current | ||
| dot3MauType25G10GbasePQGU2 OBJECT-IDENTITY One single mode fiber, 1 x 25.78125 GBd continuous reception / 1 x 10.3125 GBd burst mode transmission, medium power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.156 | current | ||
| dot3MauType25G10GbasePQGU3 OBJECT-IDENTITY One single mode fiber, 1 x 25.78125 GBd continuous reception / 1 x 10.3125 GBd burst mode transmission, high power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.157 | current | ||
| dot3MauType25G10GbasePQXD2 OBJECT-IDENTITY One single mode fiber, 1 x 25.78125 GBd continuous transmission / 1 x 10.3125 GBd burst mode reception, medium power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.158 | current | ||
| dot3MauType25G10GbasePQXD3 OBJECT-IDENTITY One single mode fiber, 1 x 25.78125 GBd continuous transmission / 1 x 10.3125 GBd burst mode reception, high power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.159 | current | ||
| dot3MauType25G10GbasePQXU2 OBJECT-IDENTITY One single mode fiber, 1 x 25.78125 GBd continuous reception / 1 x 10.3125 GBd burst mode transmission, medium power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.160 | current | ||
| dot3MauType25G10GbasePQXU3 OBJECT-IDENTITY One single mode fiber, 1 x 25.78125 GBd continuous reception / 1 x 10.3125 GBd burst mode transmission, high power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.161 | current | ||
| dot3MauType25GbasePQGD2 OBJECT-IDENTITY One single mode fiber, 1 x 25.78125 GBd continuous transmission / 1 x 25.78125 GBd burst mode reception, medium power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.162 | current | ||
| dot3MauType25GbasePQGD3 OBJECT-IDENTITY One single mode fiber, 1 x 25.78125 GBd continuous transmission / 1 x 25.78125 GBd burst mode reception, high power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.163 | current | ||
| dot3MauType25GbasePQGU2 OBJECT-IDENTITY One single mode fiber, 1 x 25.78125 GBd continuous reception / 1 x 25.78125 GBd burst mode transmission, medium power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.164 | current | ||
| dot3MauType25GbasePQGU3 OBJECT-IDENTITY One single mode fiber, 1 x 25.78125 GBd continuous reception / 1 x 25.78125 GBd burst mode transmission, high power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.165 | current | ||
| dot3MauType25GbasePQXD2 OBJECT-IDENTITY One single mode fiber, 1 x 25.78125 GBd continuous transmission / 1 x 25.78125 GBd burst mode reception, medium power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.166 | current | ||
| dot3MauType25GbasePQXD3 OBJECT-IDENTITY One single mode fiber, 1 x 25.78125 GBd continuous transmission / 1 x 25.78125 GBd burst mode reception, high power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.167 | current | ||
| dot3MauType25GbasePQXU2 OBJECT-IDENTITY One single mode fiber, 1 x 25.78125 GBd continuous reception / 1 x 25.78125 GBd burst mode transmission, medium power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.168 | current | ||
| dot3MauType25GbasePQXU3 OBJECT-IDENTITY One single mode fiber, 1 x 25.78125 GBd continuous reception / 1 x 25.78125 GBd burst mode transmission, high power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.169 | current | ||
| dot3MauType50G10GbasePQGD2 OBJECT-IDENTITY One single mode fiber, 2 x 25.78125 GBd continuous transmission / 1 x 10.3125 GBd burst mode reception, medium power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.170 | current | ||
| dot3MauType50G10GbasePQGD3 OBJECT-IDENTITY One single mode fiber, 2 x 25.78125 GBd continuous transmission / 1 x 10.3125 GBd burst mode reception, high power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.171 | current | ||
| dot3MauType50G10GbasePQGU2 OBJECT-IDENTITY One single mode fiber, 2 x 25.78125 GBd continuous reception / 1 x 10.3125 GBd burst mode transmission, medium power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.172 | current | ||
| dot3MauType50G10GbasePQGU3 OBJECT-IDENTITY One single mode fiber, 2 x 25.78125 GBd continuous reception / 1 x 10.3125 GBd burst mode transmission, high power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.173 | current | ||
| dot3MauType50G10GbasePQXD2 OBJECT-IDENTITY One single mode fiber, 2 x 25.78125 GBd continuous transmission / 1 x 10.3125 GBd burst mode reception, medium power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.174 | current | ||
| dot3MauType50G10GbasePQXD3 OBJECT-IDENTITY One single mode fiber, 2 x 25.78125 GBd continuous transmission / 1 x 10.3125 GBd burst mode reception, high power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.175 | current | ||
| dot3MauType50G10GbasePQXU2 OBJECT-IDENTITY One single mode fiber, 2 x 25.78125 GBd continuous reception / 1 x 10.3125 GBd burst mode transmission, medium power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.176 | current | ||
| dot3MauType50G10GbasePQXU3 OBJECT-IDENTITY One single mode fiber, 2 x 25.78125 GBd continuous reception / 1 x 10.3125 GBd burst mode transmission, high power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.177 | current | ||
| dot3MauType50G25GbasePQGD2 OBJECT-IDENTITY One single mode fiber, 2 x 25.78125 GBd continuous transmission / 1 x 25.78125 GBd burst mode reception, medium power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.178 | current | ||
| dot3MauType50G25GbasePQGD3 OBJECT-IDENTITY One single mode fiber, 2 x 25.78125 GBd continuous transmission / 1 x 25.78125 GBd burst mode reception, high power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.179 | current | ||
| dot3MauType50G25GbasePQGU2 OBJECT-IDENTITY One single mode fiber, 2 x 25.78125 GBd continuous reception / 1 x 25.78125 GBd burst mode transmission, medium power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.180 | current | ||
| dot3MauType50G25GbasePQGU3 OBJECT-IDENTITY One single mode fiber, 2 x 25.78125 GBd continuous reception / 1 x 25.78125 GBd burst mode transmission, high power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.181 | current | ||
| dot3MauType50G25GbasePQXD2 OBJECT-IDENTITY One single mode fiber, 2 x 25.78125 GBd continuous transmission / 1 x 25.78125 GBd burst mode reception, medium power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.182 | current | ||
| dot3MauType50G25GbasePQXD3 OBJECT-IDENTITY One single mode fiber, 2 x 25.78125 GBd continuous transmission / 1 x 25.78125 GBd burst mode reception, high power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.183 | current | ||
| dot3MauType50G25GbasePQXU2 OBJECT-IDENTITY One single mode fiber, 2 x 25.78125 GBd continuous reception / 1 x 25.78125 GBd burst mode transmission, medium power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.184 | current | ||
| dot3MauType50G25GbasePQXU3 OBJECT-IDENTITY One single mode fiber, 2 x 25.78125 GBd continuous reception / 1 x 25.78125 GBd burst mode transmission, high power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.185 | current | ||
| dot3MauType50GbasePQGD2 OBJECT-IDENTITY One single mode fiber, 2 x 25.78125 GBd continuous transmission / 2 x 25.78125 GBd burst mode reception, medium power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.186 | current | ||
| dot3MauType50GbasePQGD3 OBJECT-IDENTITY One single mode fiber, 2 x 25.78125 GBd continuous transmission / 2 x 25.78125 GBd burst mode reception, high power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.187 | current | ||
| dot3MauType50GbasePQGU2 OBJECT-IDENTITY One single mode fiber, 2 x 25.78125 GBd continuous reception / 2 x 25.78125 GBd burst mode transmission, medium power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.188 | current | ||
| dot3MauType50GbasePQGU3 OBJECT-IDENTITY One single mode fiber, 2 x 25.78125 GBd continuous reception / 2 x 25.78125 GBd burst mode transmission, high power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.189 | current | ||
| dot3MauType50GbasePQXD2 OBJECT-IDENTITY One single mode fiber, 2 x 25.78125 GBd continuous transmission / 2 x 25.78125 GBd burst mode reception, medium power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.190 | current | ||
| dot3MauType50GbasePQXD3 OBJECT-IDENTITY One single mode fiber, 2 x 25.78125 GBd continuous transmission / 2 x 25.78125 GBd burst mode reception, high power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.191 | current | ||
| dot3MauType50GbasePQXU2 OBJECT-IDENTITY One single mode fiber, 2 x 25.78125 GBd continuous reception / 2 x 25.78125 GBd burst mode transmission, medium power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.192 | current | ||
| dot3MauType50GbasePQXU3 OBJECT-IDENTITY One single mode fiber, 2 x 25.78125 GBd continuous reception / 2 x 25.78125 GBd burst mode transmission, high power class, as specified in Clause 141 | 1.3.6.1.2.1.26.4.193 | current | ||
| dot3MauType100GbaseZR OBJECT-IDENTITY 100GBASE-R PCS/100GBASE-ZR PMA over a PMD with reach up to at least 80 km as specified in Clause 154 | 1.3.6.1.2.1.26.4.194 | current | ||
| dot3MauType10GbaseBR10D OBJECT-IDENTITY One single-mode fiber OLT PHY supporting a distance of at least 10 km as specified in Clause 158 | 1.3.6.1.2.1.26.4.195 | current | ||
| dot3MauType10GbaseBR10U OBJECT-IDENTITY One single-mode fiber ONU PHY supporting a distance of at least 10 km as specified in Clause 158 | 1.3.6.1.2.1.26.4.196 | current | ||
| dot3MauType10GbaseBR20D OBJECT-IDENTITY One single-mode fiber OLT PHY supporting a distance of at least 20 km as specified in Clause 158 | 1.3.6.1.2.1.26.4.197 | current | ||
| dot3MauType10GbaseBR20U OBJECT-IDENTITY One single-mode fiber ONU PHY supporting a distance of at least 20 km as specified in Clause 158 | 1.3.6.1.2.1.26.4.198 | current | ||
| dot3MauType10GbaseBR40D OBJECT-IDENTITY One single-mode fiber OLT PHY supporting a distance of at least 40 km as specified in Clause 158 | 1.3.6.1.2.1.26.4.199 | current | ||
| dot3MauType10GbaseBR40U OBJECT-IDENTITY One single-mode fiber ONU PHY supporting a distance of at least 40 km as specified in Clause 158 | 1.3.6.1.2.1.26.4.200 | current | ||
| dot3MauType25GbaseBR10D OBJECT-IDENTITY One single-mode fiber OLT PHY supporting a distance of at least 10 km as specified in Clause 159 | 1.3.6.1.2.1.26.4.201 | current | ||
| dot3MauType25GbaseBR10U OBJECT-IDENTITY One single-mode fiber ONU PHY supporting a distance of at least 10 km as specified in Clause 159 | 1.3.6.1.2.1.26.4.202 | current | ||
| dot3MauType25GbaseBR20D OBJECT-IDENTITY One single-mode fiber OLT PHY supporting a distance of at least 20 km as specified in Clause 159 | 1.3.6.1.2.1.26.4.203 | current | ||
| dot3MauType25GbaseBR20U OBJECT-IDENTITY One single-mode fiber ONU PHY supporting a distance of at least 20 km as specified in Clause 159 | 1.3.6.1.2.1.26.4.204 | current | ||
| dot3MauType25GbaseBR40D OBJECT-IDENTITY One single-mode fiber OLT PHY supporting a distance of at least 40 km as specified in Clause 159 | 1.3.6.1.2.1.26.4.205 | current | ||
| dot3MauType25GbaseBR40U OBJECT-IDENTITY One single-mode fiber ONU PHY supporting a distance of at least 40 km as specified in Clause 159 | 1.3.6.1.2.1.26.4.206 | current | ||
| dot3MauType50GbaseBR10D OBJECT-IDENTITY One single-mode fiber OLT PHY supporting a distance of at least 10 km as specified in Clause 160 | 1.3.6.1.2.1.26.4.207 | current | ||
| dot3MauType50GbaseBR10U OBJECT-IDENTITY One single-mode fiber ONU PHY supporting a distance of at least 10 km as specified in Clause 160 | 1.3.6.1.2.1.26.4.208 | current | ||
| dot3MauType50GbaseBR20D OBJECT-IDENTITY One single-mode fiber OLT PHY supporting a distance of at least 20 km as specified in Clause 160 | 1.3.6.1.2.1.26.4.209 | current | ||
| dot3MauType50GbaseBR20U OBJECT-IDENTITY One single-mode fiber ONU PHY supporting a distance of at least 20 km as specified in Clause 160 | 1.3.6.1.2.1.26.4.210 | current | ||
| dot3MauType50GbaseBR40D OBJECT-IDENTITY One single-mode fiber OLT PHY supporting a distance of at least 40 km as specified in Clause 160 | 1.3.6.1.2.1.26.4.211 | current | ||
| dot3MauType50GbaseBR40U OBJECT-IDENTITY One single-mode fiber ONU PHY supporting a distance of at least 40 km as specified in Clause 160 | 1.3.6.1.2.1.26.4.212 | current | ||
| dot3MauType2p5GbaseAU OBJECT-IDENTITY Glass optical fiber PHY as specified in Clause 166 | 1.3.6.1.2.1.26.4.213 | current | ||
| dot3MauType5GbaseAU OBJECT-IDENTITY Glass optical fiber PHY as specified in Clause 166 | 1.3.6.1.2.1.26.4.214 | current | ||
| dot3MauType10GbaseAU OBJECT-IDENTITY Glass optical fiber PHY as specified in Clause 166 | 1.3.6.1.2.1.26.4.215 | current | ||
| dot3MauType25GbaseAU OBJECT-IDENTITY Glass optical fiber PHY as specified in Clause 166 | 1.3.6.1.2.1.26.4.216 | current | ||
| dot3MauType50GbaseAU OBJECT-IDENTITY Glass optical fiber PHY as specified in Clause 166 | 1.3.6.1.2.1.26.4.217 | current | ||
| dot3MauType25GbaseT1 OBJECT-IDENTITY Single balanced pair of conductors PHY as specified in Clause 165 | 1.3.6.1.2.1.26.4.218 | current | ||
| dot3MauType400GbaseDR42 OBJECT-IDENTITY 400GBASE-R PCS/PMA over 4 single-mode fibers in each direction PMD with reach up to at least 2 km as specified in Clause 124 | 1.3.6.1.2.1.26.4.219 | current | ||
| dot3MauType800GbaseCR8 OBJECT-IDENTITY 800GBASE-R PCS/PMA over 8-lane shielded balanced copper cable PMD as specified in Clause 162 | 1.3.6.1.2.1.26.4.220 | current | ||
| dot3MauType800GbaseDR8 OBJECT-IDENTITY 800GBASE-R PCS/PMA over 8 single-mode fibers in each direction PMD with reach up to at least 500 m as specified in Clause 124 | 1.3.6.1.2.1.26.4.221 | current | ||
| dot3MauType800GbaseDR82 OBJECT-IDENTITY 800GBASE-R PCS/PMA over 8 single-mode fibers in each direction PMD with reach up to at least 2 km as specified in Clause 124 | 1.3.6.1.2.1.26.4.222 | current | ||
| dot3MauType800GbaseKR8 OBJECT-IDENTITY 800GBASE-R PCS/PMA over an electrical backplane PMD as specified in Clause 163 | 1.3.6.1.2.1.26.4.223 | current | ||
| dot3MauType800GbaseR OBJECT-IDENTITY Multi-lane PCS as specified in Clause 172 over undefined PMA/PMD | 1.3.6.1.2.1.26.4.224 | current | ||
| dot3MauType800GbaseSR8 OBJECT-IDENTITY 800GBASE-R PCS/PMA over 8 multimode fibers in each direction PMD with reach up to at least 100 m as specified in Clause 167 | 1.3.6.1.2.1.26.4.225 | current | ||
| dot3MauType800GbaseVR8 OBJECT-IDENTITY 800GBASE-R PCS/PMA over 8 multimode fibers in each direction PMD with reach up to at least 50 m as specified in Clause 167 | 1.3.6.1.2.1.26.4.226 | current | ||
| dot3MauType10GbaseSP1D OBJECT-IDENTITY Super-PON OLT PHY, 10 Gb/s downstream, over one single-mode fiber supporting a distance of at least 50 km as specified in Clause 164 | 1.3.6.1.2.1.26.4.227 | current | ||
| dot3MauType10GbaseSP1U OBJECT-IDENTITY Super-PON ONU PHY, 10 Gb/s upstream, over one single-mode fiber supporting a distance of at least 50 km as specified in Clause 164 | 1.3.6.1.2.1.26.4.228 | current | ||
| dot3MauType10G2p5GbaseSP1D OBJECT-IDENTITY Super-PON OLT PHY, 10 Gb/s downstream / 2.5 Gb/s upstream, over one single-mode fiber supporting a distance of at least 50 km as specified in Clause 164 | 1.3.6.1.2.1.26.4.229 | current | ||
| dot3MauType10G2p5GbaseSP1U OBJECT-IDENTITY Super-PON ONU PHY, 10 Gb/s downstream / 2.5 Gb/s upstream, over one single-mode fiber supporting a distance of at least 50 km as specified in Clause 164 | 1.3.6.1.2.1.26.4.230 | current | ||
| dot3MauType100GbaseSR1 OBJECT-IDENTITY 100GBASE-R PCS/PMA over 1 multimode fiber in each direction PMD with reach up to at least 100 m as specified in Clause 167 | 1.3.6.1.2.1.26.4.231 | current | ||
| dot3MauType100GbaseVR1 OBJECT-IDENTITY 100GBASE-R PCS/PMA over 1 multimode fiber in each direction PMD with reach up to at least 50 m as specified in Clause 167 | 1.3.6.1.2.1.26.4.232 | current | ||
| dot3MauType200GbaseSR2 OBJECT-IDENTITY 200GBASE-R PCS/PMA over 2 multimode fibers in each direction PMD with reach up to at least 100 m as specified in Clause 167 | 1.3.6.1.2.1.26.4.233 | current | ||
| dot3MauType200GbaseVR2 OBJECT-IDENTITY 200GBASE-R PCS/PMA over 2 multimode fibers in each direction PMD with reach up to at least 50 m as specified in Clause 167 | 1.3.6.1.2.1.26.4.234 | current | ||
| dot3MauType400GbaseSR4 OBJECT-IDENTITY 400GBASE-R PCS/PMA over 4 multimode fibers in each direction PMD with reach up to at least 100 m as specified in Clause 167 | 1.3.6.1.2.1.26.4.235 | current | ||
| dot3MauType400GbaseVR4 OBJECT-IDENTITY 400GBASE-R PCS/PMA over 4 multimode fibers in each direction PMD with reach up to at least 50 m as specified in Clause 167 | 1.3.6.1.2.1.26.4.236 | current | ||
| dot3MauType100GbaseCR1 OBJECT-IDENTITY 100GBASE-R PCS/PMA over 1-lane shielded balanced copper cable PMD as specified in Clause 162 | 1.3.6.1.2.1.26.4.237 | current | ||
| dot3MauType100GbaseKR1 OBJECT-IDENTITY 100GBASE-R PCS/PMA over an electrical backplane PMD as specified in Clause 163 | 1.3.6.1.2.1.26.4.238 | current | ||
| dot3MauType200GbaseCR2 OBJECT-IDENTITY 200GBASE-R PCS/PMA over 2-lane shielded balanced copper cable PMD as specified in Clause 162 | 1.3.6.1.2.1.26.4.239 | current | ||
| dot3MauType200GbaseKR2 OBJECT-IDENTITY 200GBASE-R PCS/PMA over an electrical backplane PMD as specified in Clause 163 | 1.3.6.1.2.1.26.4.240 | current | ||
| dot3MauType400GbaseCR4 OBJECT-IDENTITY 400GBASE-R PCS/PMA over 4-lane shielded balanced copper cable PMD as specified in Clause 162 | 1.3.6.1.2.1.26.4.241 | current | ||
| dot3MauType400GbaseKR4 OBJECT-IDENTITY 400GBASE-R PCS/PMA over an electrical backplane PMD as specified in Clause 163 | 1.3.6.1.2.1.26.4.242 | current | ||
| dot3MauType10baseT1M OBJECT-IDENTITY 10BASE-T1M Single balanced pair multidrop PHY as specified in Clause 188 | 1.3.6.1.2.1.26.4.243 | current | ||
| dot3MauType100GbaseBR10D OBJECT-IDENTITY One single-mode fiber OLT PHY supporting a distance of at least 10 km as specified in Clause 168 | 1.3.6.1.2.1.26.4.244 | current | ||
| dot3MauType100GbaseBR10U OBJECT-IDENTITY One single-mode fiber ONU PHY supporting a distance of at least 10 km as specified in Clause 168 | 1.3.6.1.2.1.26.4.245 | current | ||
| dot3MauType100GbaseBR20D OBJECT-IDENTITY One single-mode fiber OLT PHY supporting a distance of at least 20 km as specified in Clause 168 | 1.3.6.1.2.1.26.4.246 | current | ||
| dot3MauType100GbaseBR20U OBJECT-IDENTITY One single-mode fiber ONU PHY supporting a distance of at least 20 km as specified in Clause 168 | 1.3.6.1.2.1.26.4.247 | current | ||
| dot3MauType100GbaseBR40D OBJECT-IDENTITY One single-mode fiber OLT PHY supporting a distance of at least 40 km as specified in Clause 168 | 1.3.6.1.2.1.26.4.248 | current | ||
| dot3MauType100GbaseBR40U OBJECT-IDENTITY One single-mode fiber ONU PHY supporting a distance of at least 40 km as specified in Clause 168 | 1.3.6.1.2.1.26.4.249 | current | ||
| dot3MauType100baseT1L OBJECT-IDENTITY 100BASE-T1L Single balanced pair PHY as specified in Clause 190 | 1.3.6.1.2.1.26.4.250 | current |