MIBs Depot

HUAWEI-WLAN-CONFIGURATION-MIB

Registered at
1.3.6.1.4.1.2011.6.139.11
Last updated
2020-08-13 15:31
Organization
Huawei Technologies Co.,Ltd.
Revisions
2020-08-13 15:31, 2020-08-11 19:18, 2020-08-10 15:08, 2020-08-06 19:24, 2020-07-29 10:00, 2020-07-28 14:22, 2020-07-25 17:23, 2020-07-09 19:51, 2020-07-08 14:23, 2020-07-06 16:23, 2020-06-26 17:21, 2020-06-09 14:30, 2020-06-03 19:30, 2020-05-25 17:30, 2020-05-13 21:00, 2020-04-27 15:15, 2020-04-17 16:13, 2020-04-16 15:12, 2020-03-30 09:45, 2020-03-24 14:21, 2020-03-24 11:21, 2020-03-23 18:21, 2020-03-19 18:45, 2020-03-19 10:30, 2020-03-10 10:30, 2020-03-07 11:56, 2020-02-29 17:33, 2020-02-26 17:13, 2020-02-12 20:25, 2020-01-16 14:29, 2020-01-11 15:00, 2019-12-21 17:13, 2019-12-10 21:56, 2019-11-18 20:24, 2019-10-26 11:00, 2019-10-22 15:00, 2019-09-11 10:13, 2019-09-05 10:13, 2019-08-22 22:00, 2019-08-15 16:30, 2019-08-15 11:00, 2019-08-07 10:21, 2019-07-27 14:28, 2019-07-19 18:40, 2019-07-18 10:37, 2019-06-20 17:00, 2019-06-10 20:02, 2019-06-05 11:20, 2019-05-25 11:20, 2019-05-13 11:20, 2019-05-06 15:56, 2019-05-06 11:00, 2019-04-30 17:00, 2019-04-15 11:21, 2019-04-12 11:21, 2019-04-10 13:21, 2019-03-21 11:00, 2019-03-19 14:50, 2019-03-18 14:47, 2019-03-16 11:36, 2019-03-07 16:00, 2019-03-02 18:00, 2019-03-02 12:01, 2019-01-23 15:25, 2019-01-18 11:07, 2019-01-08 11:07, 2019-01-03 11:07, 2018-12-25 18:51, 2018-12-24 20:51, 2018-12-22 14:56, 2018-12-19 15:38, 2018-12-17 11:24, 2018-12-10 13:24, 2018-12-03 14:46, 2018-11-30 17:46, 2018-11-15 17:44, 2018-11-12 10:55, 2018-11-08 14:28, 2018-11-02 10:55, 2018-10-29 12:36, 2018-10-27 20:40, 2018-10-25 20:40, 2018-10-23 21:40, 2018-10-23 09:58, 2018-10-17 20:53, 2018-10-17 14:09, 2018-10-16 09:28, 2018-10-15 15:36, 2018-09-29 11:53, 2018-09-21 17:18, 2018-09-18 10:04, 2018-09-17 09:52, 2018-09-07 09:26, 2018-09-05 19:01, 2018-09-04 18:52, 2018-09-04 14:52, 2018-08-28 11:03, 2018-08-10 10:46, 2018-08-09 19:46, 2018-08-06 19:46, 2018-07-23 19:07, 2018-07-17 19:39, 2018-07-10 10:36, 2018-06-21 15:10, 2018-05-18 15:30, 2018-05-11 20:30, 2018-05-10 20:30, 2018-05-10 14:30, 2018-04-24 21:11, 2018-04-24 21:11, 2018-04-17 21:11, 2018-03-05 17:05, 2018-02-08 14:58, 2018-02-01 14:58, 2017-12-27 18:23, 2017-12-26 20:50, 2017-12-22 09:50, 2017-12-20 09:50, 2017-12-19 11:50, 2017-12-18 11:00, 2017-12-13 15:40, 2017-12-09 14:42, 2017-11-25 11:40, 2017-11-20 15:40, 2017-11-15 20:30, 2017-11-06 15:00, 2017-10-31 11:00, 2017-10-19 09:30, 2017-10-17 17:17, 2017-10-10 20:00, 2017-09-13 15:19, 2017-09-11 11:22, 2017-09-08 16:25, 2017-09-05 22:25, 2017-09-01 17:10, 2017-08-29 17:10, 2017-08-20 21:30, 2017-08-17 21:30, 2017-08-01 19:07, 2017-08-01 15:40, 2017-07-27 20:04, 2017-06-24 16:40, 2017-06-22 11:00, 2017-06-14 10:30, 2017-06-13 17:30, 2017-06-13 13:30, 2017-06-13 08:30, 2017-06-09 20:10, 2017-06-05 10:58, 2017-06-02 15:30, 2017-05-24 15:00, 2017-05-17 15:30, 2017-05-11 20:00, 2017-05-11 15:05, 2017-05-10 19:30, 2017-04-29 14:30, 2017-03-27 14:30, 2017-03-27 10:00, 2017-03-09 10:30, 2017-02-06 17:08, 2017-01-05 15:28, 2016-12-21 17:27, 2016-12-20 10:58, 2016-12-17 10:58, 2016-12-14 09:20, 2016-11-26 09:20, 2016-11-17 10:50, 2016-11-14 10:50, 2016-11-03 11:06, 2016-10-14 14:44, 2016-09-18 15:39, 2016-09-18 10:13, 2016-09-14 09:13, 2016-09-06 11:46, 2016-09-01 20:41, 2016-08-26 10:20, 2016-08-22 10:20, 2016-08-18 15:14, 2016-08-18 15:14, 2016-08-17 09:19, 2016-08-16 16:30, 2016-08-12 16:20, 2016-08-09 11:12, 2016-08-01 11:00, 2016-07-25 09:20, 2016-07-21 14:48, 2016-07-12 15:50, 2016-06-30 15:50, 2016-06-21 20:10, 2016-06-02 11:39, 2016-06-02 10:00, 2016-06-01 15:00, 2016-06-01 14:00, 2016-05-24 17:11, 2016-05-23 16:13, 2016-05-18 16:00, 2016-05-13 16:07, 2016-05-06 11:38, 2016-04-15 17:38, 2016-03-29 15:31, 2016-03-25 15:31, 2016-03-22 15:31, 2016-03-21 15:46, 2016-03-15 20:15, 2016-03-10 11:36, 2016-02-27 14:36, 2016-02-05 14:36, 2016-01-12 13:47, 2015-12-23 15:25, 2015-12-17 20:24, 2015-11-21 10:25, 2015-10-29 20:30, 2015-10-10 10:30, 2015-09-25 10:30, 2015-09-15 10:30, 2015-08-26 15:30, 2015-08-05 15:30, 2015-08-05 09:50, 2015-07-23 09:50, 2015-07-22 10:48, 2015-07-10 14:00, 2015-06-23 14:00, 2015-06-21 10:40, 2015-06-16 09:10, 2015-06-02 11:10, 2015-05-13 14:30, 2015-05-12 14:30, 2015-05-11 14:30, 2015-05-04 14:30, 2015-04-27 15:50, 2015-04-23 11:50, 2015-04-20 09:30, 2015-04-13 10:15, 2015-04-10 14:55, 2015-03-30 18:35, 2015-03-09 09:35, 2015-02-02 10:55
Namespace
huawei
Source file
HUAWEI-WLAN-CONFIGURATION-MIB
Digest
sha256:162eb46aba634bbf9fdc4f0f838aa1a91f179b9ce0baeaf7c9c6d078fedb4f66

Description

V3.36 modify the node descriptions.

Contact

Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com

Imports

FromSymbols
HUAWEI-WLAN-AP-MIBhwWlanApMac, hwWlanApName
HUAWEI-WLAN-AP-RADIO-MIBhwWlanRadioID
HUAWEI-WLAN-MIBhwWlan
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HUAWEI-MIB
HUAWEI-WLAN-AP-MIB
HUAWEI-WLAN-AP-RADIO-MIB
HUAWEI-WLAN-CONFIGURATION-MIB
HUAWEI-WLAN-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hwWlanConfigObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.1
hwWlanGlobalConfig
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.1.1
hwWlanGlobalApUsername
OBJECT-TYPE
This object indicates user names for Telnet-based login to APs.
1.3.6.1.4.1.2011.6.139.11.1.1.1OCTET STRING (SIZE(4..31))read-writecurrent
hwWlanGlobalApPassword
OBJECT-TYPE
This object indicates passwords for Telnet-based login to APs.
1.3.6.1.4.1.2011.6.139.11.1.1.2OCTET STRING (SIZE(8..32))read-writecurrent
hwWlanUsernamePasswordApMac
OBJECT-TYPE
This object indicates query and setting of MAC addresses of clients logging in to APs.
1.3.6.1.4.1.2011.6.139.11.1.1.3MacAddressread-writecurrent
hwWlanGlobalApLldpSwitch
OBJECT-TYPE
This object indicates the status of the global LLDP function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.1.4INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanGlobalIpv6Enable
OBJECT-TYPE
This object indicates the status of the global IPv6 function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.1.5INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanStationIpv6Enable
OBJECT-TYPE
This object indicates the status of the IPv6 function of users. The default value is 1 . 1: disable 2: enable.
1.3.6.1.4.1.2011.6.139.11.1.1.6INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanApDataCollectionInterval
OBJECT-TYPE
This object indicates the period of caching AP performance. The default value is 15. It is expressed in minutes.
1.3.6.1.4.1.2011.6.139.11.1.1.7Integer32 (5..60 | 255)read-writecurrent
hwTestRtCollectOnoff
OBJECT-TYPE
This object indicates the status of the real-time collection switch.
1.3.6.1.4.1.2011.6.139.11.1.1.8Integer32read-writecurrent
hwTestApNormalCollectCycle
OBJECT-TYPE
This object indicates the regular period of an AC collecting AP performance data.
1.3.6.1.4.1.2011.6.139.11.1.1.9Integer32read-writecurrent
hwTestApRtCollectCycle
OBJECT-TYPE
This object indicates the real-time period of an AC collecting AP performance data.
1.3.6.1.4.1.2011.6.139.11.1.1.10Integer32read-writecurrent
hwWlanConfigCommitAll
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.1.11Integer32read-writecurrent
hwWlanProtect
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.1.1.12
hwWlanProtectIpAddress
OBJECT-TYPE
This object indicates the IP address of the standby AC.
1.3.6.1.4.1.2011.6.139.11.1.1.12.1IpAddressread-writecurrent
hwWlanProtectIPv6Address
OBJECT-TYPE
This object indicates setting of the IPv6 address of the standby AC.
1.3.6.1.4.1.2011.6.139.11.1.1.12.2OCTET STRINGread-writecurrent
hwWlanProtectPriority
OBJECT-TYPE
This object indicates the AC priority that determines whether the AC can be selected as the active AC. The default value is 0.
1.3.6.1.4.1.2011.6.139.11.1.1.12.3Unsigned32 (0..7)read-writecurrent
hwWlanProtectSwitch
OBJECT-TYPE
This object indicates the status of the hot backup function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.1.12.4INTEGER {enable(1), disable(2)}read-writecurrent
hwWlanProtectRestoreSwitch
OBJECT-TYPE
This object indicates the status of the switchback function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.1.12.5INTEGER {enable(1), disable(2)}read-writecurrent
hwUndoWlanProtectIpAddress
OBJECT-TYPE
This object indicates whether to restore the default setting of the IP address of the standby AC.
1.3.6.1.4.1.2011.6.139.11.1.1.12.6Integer32read-writecurrent
hwUndoWlanProtectPriority
OBJECT-TYPE
This object indicates whether to restore the default setting of the priority of the standby AC.
1.3.6.1.4.1.2011.6.139.11.1.1.12.7Integer32read-writecurrent
hwUndoWlanProtectIPv6Address
OBJECT-TYPE
This object indicates whether to restore the default setting of the IPv6 address of the standby AC.
1.3.6.1.4.1.2011.6.139.11.1.1.12.8Integer32read-writecurrent
hwWlanBackupHsbConfig
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.1.1.13
hwWlanCfgHsbServiceType
OBJECT-TYPE
This object indicates the HSB type. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.1.13.1INTEGER {disable(1), hsbGroup(2), hsbService(3)}read-writecurrent
hwWlanCfgHsbGroupId
OBJECT-TYPE
This object indicates the HSB group ID. If the HSB type is set to Disable, the ID is 0xFFFFFFFF.
1.3.6.1.4.1.2011.6.139.11.1.1.13.2Unsigned32read-writecurrent
hwWlanCfgHsbTunnelId
OBJECT-TYPE
This object indicates the ID of the HSB channel. If the HSB type is set to Disable, the ID is 0xFFFFFFFF.
1.3.6.1.4.1.2011.6.139.11.1.1.13.3Unsigned32read-writecurrent
hwWlanCommitTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.1.14not-accessiblecurrent
hwWlanCommitEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.1.14.1not-accessiblecurrent
hwWlanCommitApMac
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.1.14.1.1MacAddressnot-accessiblecurrent
hwWlanConfigCommit
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.1.14.1.2Integer32read-writecurrent
hwWlanReportStaInfo
OBJECT-TYPE
This object indicates the switch of recording user information in the log. 1:disable 2:enable.
1.3.6.1.4.1.2011.6.139.11.1.1.15INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanBLELowPowerWarningThreshold
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.1.16Integer32read-writecurrent
hwWlanBLEMonitorListTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.1.17not-accessiblecurrent
hwWlanBLEMonitorListEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.1.17.1not-accessiblecurrent
hwWlanBLEMonitoringListMac
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.1.17.1.1MacAddressnot-accessiblecurrent
hwWlanBLEMonitoringListRowStatue
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.1.17.1.2RowStatusread-writecurrent
hwWlanApPwdPolicyConfig
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.1.1.18
hwApPwdPolicyEnable
OBJECT-TYPE
Ap password policy,the default is disable
1.3.6.1.4.1.2011.6.139.11.1.1.18.1INTEGER {disable(1), enable(2)}read-writecurrent
hwApPwdPolicyExpire
OBJECT-TYPE
Set the days of password expire,the default is 90
1.3.6.1.4.1.2011.6.139.11.1.1.18.2Unsigned32 (0..999)read-writecurrent
hwApPwdPolicyHistoryRecordNum
OBJECT-TYPE
The number of password history record,the default is 5
1.3.6.1.4.1.2011.6.139.11.1.1.18.3Unsigned32 (0..12)read-writecurrent
hwApPwdPolicyAlertBefore
OBJECT-TYPE
The days of password before-expire,the default is 30
1.3.6.1.4.1.2011.6.139.11.1.1.18.4Unsigned32 (0..999)read-writecurrent
hwApPwdPolicyAlertOriginal
OBJECT-TYPE
Set password original-alert,the default is enable
1.3.6.1.4.1.2011.6.139.11.1.1.18.5INTEGER {disable(1), enable(2)}read-writecurrent
hwApPwdSetTime
OBJECT-TYPE
Get the password set time
1.3.6.1.4.1.2011.6.139.11.1.1.18.6OCTET STRING (SIZE(0..32))read-onlycurrent
hwApPwdIsExpired
OBJECT-TYPE
Query password is expired or not
1.3.6.1.4.1.2011.6.139.11.1.1.18.7INTEGER {notexpired(1), expired(2)}read-onlycurrent
hwApPwdIsOrginal
OBJECT-TYPE
Query password is original or not
1.3.6.1.4.1.2011.6.139.11.1.1.18.8INTEGER {notoriginal(1), original(2)}read-onlycurrent
hwWlanReportStaAssocInfo
OBJECT-TYPE
This object indicates the switch of recording user online and offline information in the log. 1:disable 2:enable.
1.3.6.1.4.1.2011.6.139.11.1.1.19INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanGlobalLocationSourceIPAddress
OBJECT-TYPE
This object indicates the global source IPv4 address for reporting location data in AeroScout or Ekahau location mode. You choose an IPv4 or IPv6 address.
1.3.6.1.4.1.2011.6.139.11.1.1.20IpAddressread-writecurrent
hwWlanGlobalLocationSourceIPv6Address
OBJECT-TYPE
This object indicates the global source IPv6 address for reporting location data in AeroScout or Ekahau location mode. You choose an IPv4 or IPv6 address.
1.3.6.1.4.1.2011.6.139.11.1.1.21OCTET STRINGread-writecurrent
hwWlanBLEEquipReportInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.1.22Unsigned32 (1..60)read-writecurrent
hwWlanStaDelayOffline
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.1.1.23
hwWlanStaDelayOffLineSwitch
OBJECT-TYPE
This object indicates the switch of station delay offline. 1:disable 2:enable.
1.3.6.1.4.1.2011.6.139.11.1.1.23.1INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanStaDelayOffLineAgingTime
OBJECT-TYPE
This object indicates the station delay offline aging time. range(1..86400)
1.3.6.1.4.1.2011.6.139.11.1.1.23.2Integer32 (1..86400)read-writecurrent
hwWlanStaDelayOffLineNewStaOnlineSwitch
OBJECT-TYPE
This object indicates the switch of station delay offline new station online. 1:disable 2:enable.
1.3.6.1.4.1.2011.6.139.11.1.1.23.3INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanStaDelayOffLineMaxNum
OBJECT-TYPE
This object indicates the max number of station delay offline. range (1..max)
1.3.6.1.4.1.2011.6.139.11.1.1.23.4Integer32 (1..1024000)read-writecurrent
hwWlanGlobalSpectrumAnalysisSourceIPAddress
OBJECT-TYPE
This object indicates the spectrum-analysis source IPv4 address for reporting spectrum-analysis data in spectrum-analysis server. You choose an IPv4 or IPv6 address.
1.3.6.1.4.1.2011.6.139.11.1.1.24IpAddressread-writecurrent
hwWlanGlobalSpectrumAnalysisSourceIPv6Address
OBJECT-TYPE
This object indicates the spectrum-analysis source IPv6 address for reporting spectrum-analysis data in spectrum-analysis server. You choose an IPv4 or IPv6 address.
1.3.6.1.4.1.2011.6.139.11.1.1.25OCTET STRINGread-writecurrent
hwWlanGlobalBleSourceIPAddress
OBJECT-TYPE
This object indicates the global source IPv4 address for reporting ble location data. You choose an IPv4 address.
1.3.6.1.4.1.2011.6.139.11.1.1.26IpAddressread-writecurrent
hwWlanGlobalBleSourceIPv6Address
OBJECT-TYPE
This object indicates the global source IPv6 address for reporting ble location data. You choose an IPv6 address.
1.3.6.1.4.1.2011.6.139.11.1.1.27OCTET STRINGread-writecurrent
hwWlanManualContainListTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.1.28not-accessiblecurrent
hwWlanManualContainListEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.1.28.1not-accessiblecurrent
hwWlanManualContainListMac
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.1.28.1.1MacAddressnot-accessiblecurrent
hwWlanManualContainListRowStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.1.28.1.2RowStatusread-writecurrent
hwWlanLicenseCentralizedManagement
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.1.1.29
hwWlanLicenseCentralizedGlobal
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.1.1.29.1
hwWlanLicenseCentralizedSwitch
OBJECT-TYPE
This object indicates the swtich of license centralized. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.1.29.1.1INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanLicenseCentralizedServerIPv4Addr
OBJECT-TYPE
This object indicates the ipv4 address of license centralized server.
1.3.6.1.4.1.2011.6.139.11.1.1.29.1.2IpAddressread-writecurrent
hwWlanLicenseCentralizedServerIPv6Addr
OBJECT-TYPE
This object indicates the ipv6 address of license centralized server.
1.3.6.1.4.1.2011.6.139.11.1.1.29.1.3OCTET STRINGread-writecurrent
hwWlanLicenseCentralizedClientIPv4Addr
OBJECT-TYPE
This object indicates the ipv4 address of license centralized client.
1.3.6.1.4.1.2011.6.139.11.1.1.29.1.4IpAddressread-writecurrent
hwWlanLicenseCentralizedClientIPv6Addr
OBJECT-TYPE
This object indicates the ipv6 address of license centralized client.
1.3.6.1.4.1.2011.6.139.11.1.1.29.1.5OCTET STRINGread-writecurrent
hwWlanLicenseCentralizedRole
OBJECT-TYPE
This object indicates the current role of license centralized device.
1.3.6.1.4.1.2011.6.139.11.1.1.29.1.6INTEGER {server(1), client(2)}read-onlycurrent
hwWlanLicensePoolUsed
OBJECT-TYPE
This object indicates the used of license in license pool.
1.3.6.1.4.1.2011.6.139.11.1.1.29.1.7Integer32read-onlycurrent
hwWlanLicensePoolTotal
OBJECT-TYPE
This object indicates the total number of license pool.
1.3.6.1.4.1.2011.6.139.11.1.1.29.1.8Integer32read-onlycurrent
hwWlanGlobalRogueDeviceLogSwitch
OBJECT-TYPE
This object indicates the status of rogue device log switch. The default value is 1. 1: disable 2: enable.
1.3.6.1.4.1.2011.6.139.11.1.1.30INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanNeighborRelation
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.1.1.31
hwWlanNeighborRelationTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.1.31.1not-accessiblecurrent
hwWlanNeighborRelationEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.1.31.1.1not-accessiblecurrent
hwWlanNeighborRelationApName
OBJECT-TYPE
This object indicates the AP name.
1.3.6.1.4.1.2011.6.139.11.1.1.31.1.1.1OCTET STRING (SIZE(1..63))not-accessiblecurrent
hwWlanNeighborRelationNeighborApName
OBJECT-TYPE
This object indicates the neighbor AP name.
1.3.6.1.4.1.2011.6.139.11.1.1.31.1.1.2OCTET STRING (SIZE(1..63))not-accessiblecurrent
hwWlanNeighborRelationNeighborRowStatus
OBJECT-TYPE
This object indicates the row status of this table.
1.3.6.1.4.1.2011.6.139.11.1.1.31.1.1.3RowStatusread-writecurrent
hwWlanIotOperateTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.1.32not-accessiblecurrent
hwWlanIotOperateEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.1.32.1not-accessiblecurrent
hwWlanIotOperateCardId
OBJECT-TYPE
This object indicates the AP card ID.
1.3.6.1.4.1.2011.6.139.11.1.1.32.1.1Unsigned32not-accessiblecurrent
hwWlanIotOperateType
OBJECT-TYPE
This object indicates the operation type to the IOT card of the AP.
1.3.6.1.4.1.2011.6.139.11.1.1.32.1.2INTEGER {reboot(1), resetfactoryconfiguration(2), switchfirmware(3), resetnetworkconfiguration(4)}read-writecurrent
hwWlanGlobalAntiInterferenceSwitch
OBJECT-TYPE
This object indicates the status of anti-interference switch. The default value is 2. 1: disable 2: enable.
1.3.6.1.4.1.2011.6.139.11.1.1.33INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanGlobalAntiInterferencePerPacketTpcSwitch
OBJECT-TYPE
This object indicates the status of anti-interference per-packet-TPC switch. The default value is 2. 1: disable 2: enable.
1.3.6.1.4.1.2011.6.139.11.1.1.34INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanGlobalAeroscoutLocalIPv4
OBJECT-TYPE
This object indicates the aeroscout local IPv4 address for receiving message from aeroscout server.
1.3.6.1.4.1.2011.6.139.11.1.1.35IpAddressread-writecurrent
hwWlanGlobalAeroscoutLocalIPv6
OBJECT-TYPE
This object indicates the aeroscout local IPv6 address for receiving message from aeroscout server.
1.3.6.1.4.1.2011.6.139.11.1.1.36OCTET STRINGread-writecurrent
hwWlanGlobalApLoadRtuFileName
OBJECT-TYPE
This object indicates the AP RTU load file name.
1.3.6.1.4.1.2011.6.139.11.1.1.37OCTET STRING (SIZE(1..128))read-writecurrent
hwApAuthObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.1.2
hwWlanApAuthMode
OBJECT-TYPE
This object indicates the AP authentication mode. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.2.1INTEGER {macAuth(1), snAuth(2), noAuth(3)}read-writecurrent
hwWlanApMacWhitelistTable
OBJECT-TYPE
This table is used to add and delete AP MAC addresses in the white lists.
1.3.6.1.4.1.2011.6.139.11.1.2.2not-accessiblecurrent
hwWlanApMacWhitelistEntry
OBJECT-TYPE
The index of this table is hwWlanApMacWhitelistMacAddr.
1.3.6.1.4.1.2011.6.139.11.1.2.2.1not-accessiblecurrent
hwWlanApMacWhitelistMacAddr
OBJECT-TYPE
This object indicates the MAC address of an AP.
1.3.6.1.4.1.2011.6.139.11.1.2.2.1.1MacAddressnot-accessiblecurrent
hwWlanApMacWhitelistRowStatus
OBJECT-TYPE
This object indicates the row status of this table.
1.3.6.1.4.1.2011.6.139.11.1.2.2.1.2RowStatusread-createcurrent
hwWlanApSnWhitelistTable
OBJECT-TYPE
This table is used to add and delete AP sequence numbers in the white lists of AP sequence numbers.
1.3.6.1.4.1.2011.6.139.11.1.2.3not-accessiblecurrent
hwWlanApSnWhitelistEntry
OBJECT-TYPE
The index of this table is hwWlanApSnWhitelistSn.
1.3.6.1.4.1.2011.6.139.11.1.2.3.1not-accessiblecurrent
hwWlanApSnWhitelistSn
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.2.3.1.1OCTET STRINGnot-accessiblecurrent
hwWlanApSnWhitelistRowStatus
OBJECT-TYPE
Indicate the row status of this table.
1.3.6.1.4.1.2011.6.139.11.1.2.3.1.2RowStatusread-createcurrent
hwWlanApMacBlacklistTable
OBJECT-TYPE
This table describes the AP MAC blacklist.This table is used to add an AP's MAC address to the blacklist or delete an AP's MAC address from the blacklist.
1.3.6.1.4.1.2011.6.139.11.1.2.4not-accessiblecurrent
hwWlanApMacBlacklistEntry
OBJECT-TYPE
The index of this table is hwWlanApMacBlacklistMacAddr.
1.3.6.1.4.1.2011.6.139.11.1.2.4.1not-accessiblecurrent
hwWlanApMacBlacklistMacAddr
OBJECT-TYPE
This object indicates the MAC address of an AP.
1.3.6.1.4.1.2011.6.139.11.1.2.4.1.1MacAddressnot-accessiblecurrent
hwWlanApMacBlacklistRowStatus
OBJECT-TYPE
This object indicates the row status of this table.
1.3.6.1.4.1.2011.6.139.11.1.2.4.1.2RowStatusread-createcurrent
hwAPGroupTable
OBJECT-TYPE
This table is used to create or delete AP groups and bind or unbind the AP system profile, 2G radio profile, and domain profile.
1.3.6.1.4.1.2011.6.139.11.1.3not-accessiblecurrent
hwAPGroupEntry
OBJECT-TYPE
The index of this table is hwAPGroupName.
1.3.6.1.4.1.2011.6.139.11.1.3.1not-accessiblecurrent
hwAPGroupName
OBJECT-TYPE
This object indicates the AP group name. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.3.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwAPGrpAPSystemProfile
OBJECT-TYPE
This object indicates the system profile to which AP groups are bound. The default value is default.
1.3.6.1.4.1.2011.6.139.11.1.3.1.2OCTET STRING (SIZE(1..35))read-writecurrent
hwAPGrpDomainProfile
OBJECT-TYPE
This object indicates the domain profile to which AP groups are bound. The default value is default.
1.3.6.1.4.1.2011.6.139.11.1.3.1.4OCTET STRING (SIZE(1..35))read-writecurrent
hwAPGrpRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ROWSTATUS_ACTIVE: active ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy
1.3.6.1.4.1.2011.6.139.11.1.3.1.5RowStatusread-writecurrent
hwAPGrpWidsProfile
OBJECT-TYPE
This object indicates the bound WIDS profile.
1.3.6.1.4.1.2011.6.139.11.1.3.1.6OCTET STRING (SIZE(0..35))read-writecurrent
hwAPGrpBleProfile
OBJECT-TYPE
This object indicates the bound BLE profile.
1.3.6.1.4.1.2011.6.139.11.1.3.1.7OCTET STRING (SIZE(0..35))read-writecurrent
hwAPGrpUUIDString
OBJECT-TYPE
This object indicates the UUID String value of Group.
1.3.6.1.4.1.2011.6.139.11.1.3.1.8OCTET STRING (SIZE(0..16))read-writecurrent
hwAPGrpUUIDHex
OBJECT-TYPE
This object indicates the UUID Hex value of Group.
1.3.6.1.4.1.2011.6.139.11.1.3.1.9OCTET STRING (SIZE(0..32))read-writecurrent
hwAPGrpSiteCode
OBJECT-TYPE
This object indicates the site code of Group.
1.3.6.1.4.1.2011.6.139.11.1.3.1.10OCTET STRING (SIZE(0..14))read-writecurrent
hwAPGrpDomainName
OBJECT-TYPE
This object indicates the domain name of Group.
1.3.6.1.4.1.2011.6.139.11.1.3.1.11OCTET STRING (SIZE(0..255))read-writecurrent
hwAPGrpLocation
OBJECT-TYPE
This object indicates the ap location of Group.
1.3.6.1.4.1.2011.6.139.11.1.3.1.12OCTET STRING (SIZE(0..63))read-writecurrent
hwAPGrpApNum
OBJECT-TYPE
This object indicates the ap numbers of Group.
1.3.6.1.4.1.2011.6.139.11.1.3.1.13Unsigned32read-onlycurrent
hwAPGrpHighwayProfileName
OBJECT-TYPE
This object indicates the UUID String value of Group.
1.3.6.1.4.1.2011.6.139.11.1.3.1.14OCTET STRING (SIZE(0..35))read-writecurrent
hwAPGrpAPIPVersion
OBJECT-TYPE
This object indicates the IP Version of AP.
1.3.6.1.4.1.2011.6.139.11.1.3.1.15INTEGER {all(1), ipv4(2), ipv6(3)}read-writecurrent
hwAPGroupWiredPortTable
OBJECT-TYPE
This table is the AP wired port profile table.This table is used to bind a wired port profile to an AP group or unbind a wired port profile from an AP group.
1.3.6.1.4.1.2011.6.139.11.1.4not-accessiblecurrent
hwAPGroupWiredPortEntry
OBJECT-TYPE
Indexes of this table are hwAPGroupName, hwAPGrpWPInterfaceType, and hwAPGrpWPInterfaceNum.
1.3.6.1.4.1.2011.6.139.11.1.4.1not-accessiblecurrent
hwAPGrpWPInterfaceType
OBJECT-TYPE
This object indicates the interface type. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.4.1.1INTEGER {fe(1), ge(2), trunk(3), multige(4), xge(5)}not-accessiblecurrent
hwAPGrpWPInterfaceNum
OBJECT-TYPE
This object indicates the interface index.
1.3.6.1.4.1.2011.6.139.11.1.4.1.2Unsigned32 (0..27)not-accessiblecurrent
hwAPGrpWPProfile
OBJECT-TYPE
This object indicates the bound wired port profile.
1.3.6.1.4.1.2011.6.139.11.1.4.1.3OCTET STRING (SIZE(1..35))read-writecurrent
hwAPGrpWPRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEAN.
1.3.6.1.4.1.2011.6.139.11.1.4.1.4RowStatusread-writecurrent
hwAPGroupRadioTable
OBJECT-TYPE
This table is used to bind a 5G radio profile, Mesh profile, WDS profile, WIDS profile, location profile, or spectrum profile to an AP group or unbind a 5G radio profile, Mesh profile, WDS profile, WIDS profile, location profile, or spectrum profile from an AP group..
1.3.6.1.4.1.2011.6.139.11.1.5not-accessiblecurrent
hwAPGroupRadioEntry
OBJECT-TYPE
Indexes of this table are hwAPGroupName and hwAPGrpRadioId.
1.3.6.1.4.1.2011.6.139.11.1.5.1not-accessiblecurrent
hwAPGrpRadioId
OBJECT-TYPE
This object indicates the radio ID. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.5.1.1Unsigned32 (0..2)not-accessiblecurrent
hwAPGrpRadio5gProfile
OBJECT-TYPE
This object indicates the bound 5G radio profile.
1.3.6.1.4.1.2011.6.139.11.1.5.1.2OCTET STRING (SIZE(1..35))read-writecurrent
hwAPGrpMeshProfile
OBJECT-TYPE
This object indicates the bound Mesh profile.
1.3.6.1.4.1.2011.6.139.11.1.5.1.3OCTET STRING (SIZE(0..35))read-writecurrent
hwAPGrpWdsProfile
OBJECT-TYPE
This object indicates the bound WDS profile.
1.3.6.1.4.1.2011.6.139.11.1.5.1.4OCTET STRING (SIZE(0..35))read-writecurrent
hwAPGrpLocationProfile
OBJECT-TYPE
This object indicates the bound location profile.
1.3.6.1.4.1.2011.6.139.11.1.5.1.6OCTET STRING (SIZE(0..35))read-writecurrent
hwAPGrpRadioRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.
1.3.6.1.4.1.2011.6.139.11.1.5.1.8RowStatusread-writecurrent
hwAPGrpRadio2gProfile
OBJECT-TYPE
This object indicates the 2G radio profile to which AP groups are bound. The default value is default.
1.3.6.1.4.1.2011.6.139.11.1.5.1.9OCTET STRING (SIZE(1..35))read-writecurrent
hwAPGrpMeshWhitelistProfile
OBJECT-TYPE
This object indicates the bound whitelist profile.
1.3.6.1.4.1.2011.6.139.11.1.5.1.10OCTET STRING (SIZE(0..35))read-writecurrent
hwAPGrpWdsWhitelistProfile
OBJECT-TYPE
This object indicates the bound whitelist profile.
1.3.6.1.4.1.2011.6.139.11.1.5.1.11OCTET STRING (SIZE(0..35))read-writecurrent
hwAPGrpRadioSwitch
OBJECT-TYPE
This object indicates the name of a 2G radio profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.5.1.12INTEGER {disable(1), enable(2)}read-writecurrent
hwAPGrpRadioChannel
OBJECT-TYPE
This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 196 (with a separation interval of 4).
1.3.6.1.4.1.2011.6.139.11.1.5.1.13Unsigned32read-writecurrent
hwAPGrpRadioBandwidth
OBJECT-TYPE
This object indicate a bandwidth. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.5.1.14INTEGER {ht20(1), ht40Plus(2), ht40Minus(3), ht80(4), ht160(5), invalid(255)}read-writecurrent
hwAPGrpRadioEirp
OBJECT-TYPE
This object indicates a power value. The default value is 127. The configuration is saved but the actual power is determined by the maximum power supported by the AP.
1.3.6.1.4.1.2011.6.139.11.1.5.1.15Unsigned32 (1..127)read-writecurrent
hwAPGrpRadioAntennaGain
OBJECT-TYPE
This object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.
1.3.6.1.4.1.2011.6.139.11.1.5.1.16Integer32 (-10..30 | 255)read-writecurrent
hwAPGrpRadioCoverageDistance
OBJECT-TYPE
This object indicates a radio coverage distance. The default value is 3. The unit is 0.1 km.
1.3.6.1.4.1.2011.6.139.11.1.5.1.17Unsigned32 (1..400)read-writecurrent
hwAPGrpRadioWorkMode
OBJECT-TYPE
This object indicates the radio working mode. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.5.1.18INTEGER {normal(1), monitor(2), dualband(3), proxyScan(4)}read-writecurrent
hwAPGrpRadioFrequency
OBJECT-TYPE
This object indicates the setting of the frequency band for radio 0. The default value is 1. 1: frequency2G, 2: frequency5G.
1.3.6.1.4.1.2011.6.139.11.1.5.1.19INTEGER {frequency2G(1), frequency5G(2)}read-writecurrent
hwAPGrpSpectrumAnalysisSwitch
OBJECT-TYPE
This object indicates the status of the spectrum analysis function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.5.1.20INTEGER {disable(1), enable(2)}read-writecurrent
hwAPGrpWidsDeviceDetectSwitch
OBJECT-TYPE
This object indicates the status of the device detection function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.5.1.21INTEGER {disable(1), enable(2)}read-writecurrent
hwAPGrpWidsAttackDetectEnBmp
OBJECT-TYPE
This object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk.
1.3.6.1.4.1.2011.6.139.11.1.5.1.22Unsigned32read-writecurrent
hwAPGrpWidsRogueContainSwitch
OBJECT-TYPE
This object indicates the status of the device detection function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.5.1.23INTEGER {disable(1), enable(2)}read-writecurrent
hwAPGrpRadioSecondChannel
OBJECT-TYPE
This object indicates a radio-frequency channel. The value ranges from 42,58,106,122,138,155.
1.3.6.1.4.1.2011.6.139.11.1.5.1.24Unsigned32read-writecurrent
hwAPGrpAutoChannelSelectSwitch
OBJECT-TYPE
This object indicates the status of the automatic channel selection function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.5.1.25INTEGER {disable(1), enable(2)}read-writecurrent
hwAPGrpAutoTxPowerSelectSwitch
OBJECT-TYPE
This object indicates the status of the automatic power selection function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.5.1.26INTEGER {disable(1), enable(2)}read-writecurrent
hwAPGrpSfnRoamCtsSwitch
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.5.1.27INTEGER {disable(1), enable(2)}read-writecurrent
hwAPGrpSfnRoamBeaconSwitch
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.5.1.28INTEGER {disable(1), enable(2)}read-writecurrent
hwAPGrpSfnRoamCtsDelay
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.5.1.29Integer32 (0..255)read-writecurrent
hwAPGroupRadioCalibrateFlexibleRadio
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.5.1.30INTEGER {disable(1), enable(2)}read-writecurrent
hwAPGrpAutoBandwidthSelectSwitch
OBJECT-TYPE
This object indicates the status of the automatic bandwidth selection function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.5.1.31INTEGER {disable(1), enable(2)}read-writecurrent
hwAPGrpReferenceDataAnalysis
OBJECT-TYPE
This object indicates the status of the referencing data-analysis function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.5.1.32INTEGER {disable(1), enable(2)}read-writecurrent
hwAPGroupVapTable
OBJECT-TYPE
This table is used to create VAPs in an AP group.
1.3.6.1.4.1.2011.6.139.11.1.6not-accessiblecurrent
hwAPGroupVapEntry
OBJECT-TYPE
Indexes of this table are hwAPGroupName, hwAPGrpRadioId, and hwAPGrpWlanId.
1.3.6.1.4.1.2011.6.139.11.1.6.1not-accessiblecurrent
hwAPGrpWlanId
OBJECT-TYPE
This object indicates the WLAN ID. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.6.1.1Unsigned32 (1..16)not-accessiblecurrent
hwAPGrpVapProfile
OBJECT-TYPE
This object indicates the bound VAP profile.
1.3.6.1.4.1.2011.6.139.11.1.6.1.2OCTET STRING (SIZE(1..35))read-writecurrent
hwAPGrpVapRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.6.1.3RowStatusread-writecurrent
hwAPGrpVapServiceVlan
OBJECT-TYPE
This object indicates the service VLAN for the VAP. The invalid value is 0.
1.3.6.1.4.1.2011.6.139.11.1.6.1.4Unsigned32 (0..4094)read-writecurrent
hwAPGrpVapVlanPool
OBJECT-TYPE
This object indicates the VLAN pool to which the VAP is bound.
1.3.6.1.4.1.2011.6.139.11.1.6.1.5OCTET STRING (SIZE(0..31))read-writecurrent
hwAPSpecificTable
OBJECT-TYPE
This table is used to create or delete an AP specific profile and bind an AP system profile, 2G radio profile, or domain profile to it or unbind an AP system profile, 2G radio profile, or domain profile from it.
1.3.6.1.4.1.2011.6.139.11.1.7not-accessiblecurrent
hwAPSpecificEntry
OBJECT-TYPE
The index of this table is hwAPSpApMac.
1.3.6.1.4.1.2011.6.139.11.1.7.1not-accessiblecurrent
hwAPSpAPSystemProfile
OBJECT-TYPE
This object indicates the system profile bound to the AP specific profile.
1.3.6.1.4.1.2011.6.139.11.1.7.1.2OCTET STRING (SIZE(0..35))read-writecurrent
hwAPSpDomainProfile
OBJECT-TYPE
This object indicates the domain profile bound to the AP specific profile.
1.3.6.1.4.1.2011.6.139.11.1.7.1.4OCTET STRING (SIZE(0..35))read-writecurrent
hwAPSpRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.
1.3.6.1.4.1.2011.6.139.11.1.7.1.5RowStatusread-writecurrent
hwAPSpApMac
OBJECT-TYPE
This object indicates the MAC address of an AP.
1.3.6.1.4.1.2011.6.139.11.1.7.1.6MacAddressnot-accessiblecurrent
hwAPSpApId
OBJECT-TYPE
This object indicates the AP ID.
1.3.6.1.4.1.2011.6.139.11.1.7.1.7Unsigned32read-writecurrent
hwAPSpApTypeInfo
OBJECT-TYPE
This object indicates the domain profile bound to the AP specific profile.
1.3.6.1.4.1.2011.6.139.11.1.7.1.8OCTET STRING (SIZE(0..35))read-writecurrent
hwAPSpWidsProfile
OBJECT-TYPE
This object indicates the bound WIDS profile.
1.3.6.1.4.1.2011.6.139.11.1.7.1.9OCTET STRING (SIZE(0..35))read-writecurrent
hwAPSpBleProfile
OBJECT-TYPE
This object indicates the bound BLE profile.
1.3.6.1.4.1.2011.6.139.11.1.7.1.10OCTET STRING (SIZE(0..35))read-writecurrent
hwAPSpLongitude
OBJECT-TYPE
This object indicates the longitude.
1.3.6.1.4.1.2011.6.139.11.1.7.1.11OCTET STRING (SIZE(0..15))read-writecurrent
hwAPSpLatitude
OBJECT-TYPE
This object indicates the latitude.
1.3.6.1.4.1.2011.6.139.11.1.7.1.12OCTET STRING (SIZE(0..14))read-writecurrent
hwAPSpApAddressMode
OBJECT-TYPE
This object indicates the IP address allocation mode.
1.3.6.1.4.1.2011.6.139.11.1.7.1.13INTEGER {invalid(-1), static(1), dhcp(2), slaac(3)}read-writecurrent
hwAPSpApIPv4Address
OBJECT-TYPE
This object indicates the AP's IPv4 address. hwAPSpApIPv4Address takes effect if hwAPSpApAddressMode is set to static.
1.3.6.1.4.1.2011.6.139.11.1.7.1.14IpAddressread-writecurrent
hwAPSpApIPv4Mask
OBJECT-TYPE
This object indicates the AP's IPv4 mask. hwAPSpApIPv4Mask takes effect if hwAPSpApAddressMode is set to static.
1.3.6.1.4.1.2011.6.139.11.1.7.1.15IpAddressread-writecurrent
hwAPSpApIPv4Gateway
OBJECT-TYPE
This object indicates the AP's IPv4 gateway. hwAPSpApIPv4Gateway takes effect if hwAPSpApAddressMode is set to static.
1.3.6.1.4.1.2011.6.139.11.1.7.1.16IpAddressread-writecurrent
hwAPSpApIPv6Address
OBJECT-TYPE
This object indicates the AP's IPv6 address. hwAPSpApIPv6Address takes effect if hwAPSpApAddressMode is set to static.
1.3.6.1.4.1.2011.6.139.11.1.7.1.17OCTET STRING (SIZE(0..46))read-writecurrent
hwAPSpApIPv6PrefixLen
OBJECT-TYPE
This object indicates the length of the IPv6 address prefix.
1.3.6.1.4.1.2011.6.139.11.1.7.1.18Integer32 (0..128)read-writecurrent
hwAPSpApIPv6Gateway
OBJECT-TYPE
This object indicates the AP's IPv6 gateway. hwAPSpApIPv6Gateway takes effect if hwAPSpApAddressMode is set to static.
1.3.6.1.4.1.2011.6.139.11.1.7.1.19OCTET STRING (SIZE(0..46))read-writecurrent
hwAPSpIPv4ACList
OBJECT-TYPE
This object indicates the AC IPv4 address list. NOTE AC lists are separated by question marks (?).A maximum of four AC lists can be configured.
1.3.6.1.4.1.2011.6.139.11.1.7.1.20OCTET STRINGread-writecurrent
hwAPSpIPv6ACList
OBJECT-TYPE
This object indicates the AC IPv6 address list. NOTE AC lists are separated by question marks (?).A maximum of four AC lists can be configured.
1.3.6.1.4.1.2011.6.139.11.1.7.1.21OCTET STRINGread-writecurrent
hwAPSpGroupName
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.7.1.22OCTET STRING (SIZE(0..35))read-writecurrent
hwAPSpApName
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.7.1.23OCTET STRING (SIZE(0..31))read-writecurrent
hwAPSpBranchGroupName
OBJECT-TYPE
This object indicates the AP branch group name.
1.3.6.1.4.1.2011.6.139.11.1.7.1.24OCTET STRING (SIZE(0..35))read-writecurrent
hwAPSpLocation
OBJECT-TYPE
This object indicates the ap location.
1.3.6.1.4.1.2011.6.139.11.1.7.1.25OCTET STRING (SIZE(0..63))read-writecurrent
hwAPSpSiteCode
OBJECT-TYPE
This object indicates the site code.
1.3.6.1.4.1.2011.6.139.11.1.7.1.26OCTET STRING (SIZE(0..14))read-writecurrent
hwAPSpDomainName
OBJECT-TYPE
This object indicates the domain name.
1.3.6.1.4.1.2011.6.139.11.1.7.1.27OCTET STRING (SIZE(0..255))read-writecurrent
hwAPSpApZoneName
OBJECT-TYPE
This object indicates the AP zone name.
1.3.6.1.4.1.2011.6.139.11.1.7.1.28OCTET STRING (SIZE(0..35))read-writecurrent
hwAPSpecificWiredPortTable
OBJECT-TYPE
This table is used to bind an AP wired port profile to an AP specific profile or unbind an AP wired port profile from an AP specific profile..
1.3.6.1.4.1.2011.6.139.11.1.8not-accessiblecurrent
hwAPSpecificWiredPortEntry
OBJECT-TYPE
Indexes of this table are hwAPSpWPInterfaceType, hwAPSpWPInterfaceNum and hwAPSpApMac.
1.3.6.1.4.1.2011.6.139.11.1.8.1not-accessiblecurrent
hwAPSpWPInterfaceType
OBJECT-TYPE
This object indicates the interface type.
1.3.6.1.4.1.2011.6.139.11.1.8.1.1INTEGER {fe(1), ge(2), trunk(3), multige(4), xge(5)}not-accessiblecurrent
hwAPSpWPInterfaceNum
OBJECT-TYPE
This object indicates the interface index.
1.3.6.1.4.1.2011.6.139.11.1.8.1.2Unsigned32 (0..27)not-accessiblecurrent
hwAPSpWPProfile
OBJECT-TYPE
This object indicates the bound wired port profile.
1.3.6.1.4.1.2011.6.139.11.1.8.1.3OCTET STRING (SIZE(0..35))read-writecurrent
hwAPSpWPRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.
1.3.6.1.4.1.2011.6.139.11.1.8.1.4RowStatusread-writecurrent
hwAPSpWPApId
OBJECT-TYPE
This object indicates the AP ID.
1.3.6.1.4.1.2011.6.139.11.1.8.1.5Unsigned32read-onlycurrent
hwAPSpecificRadioTable
OBJECT-TYPE
This table records the information about profiles bound based on radio in an AP specific profile, including 5G radio profile, Mesh profile, WDS profile, WIDS profile, location profile, and spectrum profile.
1.3.6.1.4.1.2011.6.139.11.1.9not-accessiblecurrent
hwAPSpecificRadioEntry
OBJECT-TYPE
Indexes of this table are hwAPSpecificName and hwAPSpRadio.
1.3.6.1.4.1.2011.6.139.11.1.9.1not-accessiblecurrent
hwAPSpRadio
OBJECT-TYPE
This object indicates the radio ID. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.9.1.1Unsigned32 (0..2)not-accessiblecurrent
hwAPSp5gRadioProfile
OBJECT-TYPE
This object indicates the bound 5G radio profile.
1.3.6.1.4.1.2011.6.139.11.1.9.1.2OCTET STRING (SIZE(0..35))read-writecurrent
hwAPSpMeshProfile
OBJECT-TYPE
This object indicates the bound Mesh profile.
1.3.6.1.4.1.2011.6.139.11.1.9.1.3OCTET STRING (SIZE(0..35))read-writecurrent
hwAPSpWdsProfile
OBJECT-TYPE
This object indicates the bound WDS profile.
1.3.6.1.4.1.2011.6.139.11.1.9.1.4OCTET STRING (SIZE(0..35))read-writecurrent
hwAPSpLocationProfile
OBJECT-TYPE
This object indicates the bound location profile.
1.3.6.1.4.1.2011.6.139.11.1.9.1.6OCTET STRING (SIZE(0..35))read-writecurrent
hwAPSpRadioRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.9.1.8RowStatusread-writecurrent
hwAPSpRadio2gProfile
OBJECT-TYPE
This object indicates the bound 2G radio profile.
1.3.6.1.4.1.2011.6.139.11.1.9.1.9OCTET STRING (SIZE(0..35))read-writecurrent
hwAPSpMeshWhitelistProfile
OBJECT-TYPE
This object indicates the bound whitelist profile.
1.3.6.1.4.1.2011.6.139.11.1.9.1.10OCTET STRING (SIZE(0..35))read-writecurrent
hwAPSpWdsWhitelistProfile
OBJECT-TYPE
This object indicates the bound whitelist profile.
1.3.6.1.4.1.2011.6.139.11.1.9.1.11OCTET STRING (SIZE(0..35))read-writecurrent
hwAPSpRadioSwitch
OBJECT-TYPE
This object indicates the switch of radio. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.9.1.12INTEGER {disable(1), invalid(255)}read-writecurrent
hwAPSpRadioChannel
OBJECT-TYPE
This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 196 (with a separation interval of 4).
1.3.6.1.4.1.2011.6.139.11.1.9.1.13Unsigned32read-writecurrent
hwAPSpRadioBandwidth
OBJECT-TYPE
This object indicate a bandwidth. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.9.1.14INTEGER {ht20(1), ht40Plus(2), ht40Minus(3), ht80(4), ht160(5), invalid(255)}read-writecurrent
hwAPSpRadioEirp
OBJECT-TYPE
This object indicates a power value. The default value is 255. The configuration is saved but the actual power is determined by the maximum power supported by the AP.
1.3.6.1.4.1.2011.6.139.11.1.9.1.15Unsigned32 (1..127 | 255)read-writecurrent
hwAPSpRadioAntennaGain
OBJECT-TYPE
This object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.
1.3.6.1.4.1.2011.6.139.11.1.9.1.16Integer32 (-10..30 | 255)read-writecurrent
hwAPSpRadioCoverageDistance
OBJECT-TYPE
This object indicates a radio coverage distance. The default value is 65535. The unit is 0.1 km.
1.3.6.1.4.1.2011.6.139.11.1.9.1.17Unsigned32 (1..400 | 65535)read-writecurrent
hwAPSpRadioWorkMode
OBJECT-TYPE
This object indicates the radio working mode. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.9.1.18INTEGER {normal(1), monitor(2), dualband(3), proxyScan(4), invalid(255)}read-writecurrent
hwAPSpRadioFrequency
OBJECT-TYPE
This object indicates the setting of the frequency band for radio 0. The default value is invalid. 1: frequency2G, 2: frequency5G.
1.3.6.1.4.1.2011.6.139.11.1.9.1.19INTEGER {frequency2G(1), frequency5G(2), invalid(255)}read-writecurrent
hwAPSpSpectrumAnalysisSwitch
OBJECT-TYPE
This object indicates the status of the spectrum analysis function. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.9.1.20INTEGER {enable(2), invalid(255)}read-writecurrent
hwAPSpWidsDeviceDetectSwitch
OBJECT-TYPE
This object indicates the status of the device detection function. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.9.1.21INTEGER {enable(2), invalid(255)}read-writecurrent
hwAPSpWidsAttackDetectEnBmp
OBJECT-TYPE
This object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk.
1.3.6.1.4.1.2011.6.139.11.1.9.1.22Unsigned32read-writeobsolete
hwAPSpWidsRogueContainSwitch
OBJECT-TYPE
This object indicates the status of the device detection function. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.9.1.23INTEGER {enable(2), invalid(255)}read-writecurrent
hwAPSpRadioApId
OBJECT-TYPE
This object indicates the AP ID.
1.3.6.1.4.1.2011.6.139.11.1.9.1.24Unsigned32read-onlycurrent
hwAPSpRadioSecondChannel
OBJECT-TYPE
This object indicates a radio-frequency channel. The value ranges from 42,58,106,122,138,155.
1.3.6.1.4.1.2011.6.139.11.1.9.1.25Unsigned32read-writecurrent
hwAPSpAutoChannelSelectSwitch
OBJECT-TYPE
This object indicates the status of the automatic channel selection function. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.9.1.26INTEGER {disable(1), enable(2), invalid(255)}read-writecurrent
hwAPSpAutoTxPowerSelectSwitch
OBJECT-TYPE
This object indicates the status of the automatic power selection function. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.9.1.27INTEGER {disable(1), enable(2), invalid(255)}read-writecurrent
hwAPSpSfnRoamCtsSwitch
OBJECT-TYPE
This object indicates the status of Cts Switch. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.9.1.28INTEGER {disable(1), invalid(255)}read-writecurrent
hwAPSpSfnRoamBeaconSwitch
OBJECT-TYPE
This object indicates the status of Beacon Switch. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.9.1.29INTEGER {disable(1), invalid(255)}read-writecurrent
hwAPSpSfnRoamCtsDelay
OBJECT-TYPE
This object indicates Cts Delay time. The default value is 0.
1.3.6.1.4.1.2011.6.139.11.1.9.1.30Integer32 (0..255)read-writecurrent
hwAPSpRadioCalibrateFlexibleRadio
OBJECT-TYPE
This object indicates the status of Beacon Switch. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.9.1.31INTEGER {disable(1), invalid(255)}read-writecurrent
hwAPSpAutoBandwidthSelectSwitch
OBJECT-TYPE
This object indicates the status of the automatic bandwidth selection function. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.9.1.32INTEGER {disable(1), enable(2), invalid(255)}read-writecurrent
hwAPSpReferenceDataAnalysis
OBJECT-TYPE
This object indicates the status of the referencing data-analysis function. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.9.1.33INTEGER {disable(1), enable(2), invalid(255)}read-writecurrent
hwAPSpWidsAttackDetectWeakIv
OBJECT-TYPE
This object indicates weak IV attack detection. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.9.1.34INTEGER {disable(1), enable(2), invalid(255)}read-writecurrent
hwAPSpWidsAttackDetectSpoof
OBJECT-TYPE
This object indicates spoofing attack detection. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.9.1.35INTEGER {disable(1), enable(2), invalid(255)}read-writecurrent
hwAPSpWidsAttackDetectFlood
OBJECT-TYPE
This object indicates flood attack detection. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.9.1.36INTEGER {disable(1), enable(2), invalid(255)}read-writecurrent
hwAPSpWidsAttackDetectWpaPsk
OBJECT-TYPE
This object indicates brute force attack detection in WPA-PSK authentication. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.9.1.37INTEGER {disable(1), enable(2), invalid(255)}read-writecurrent
hwAPSpWidsAttackDetectWpa2Psk
OBJECT-TYPE
This object indicates brute force attack detection in WPA2-PSK authentication. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.9.1.38INTEGER {disable(1), enable(2), invalid(255)}read-writecurrent
hwAPSpWidsAttackDetectWapiPsk
OBJECT-TYPE
This object indicates brute force attack detection in WAPI-PSK authentication. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.9.1.39INTEGER {disable(1), enable(2), invalid(255)}read-writecurrent
hwAPSpWidsAttackDetectWepShareKey
OBJECT-TYPE
This object indicates brute force attack detection in WEP shared key authentication. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.9.1.40INTEGER {disable(1), enable(2), invalid(255)}read-writecurrent
hwAPSpecificVapTable
OBJECT-TYPE
This table is used to create VAPs in an AP specific profile.
1.3.6.1.4.1.2011.6.139.11.1.10not-accessiblecurrent
hwAPSpecificVapEntry
OBJECT-TYPE
Indexes of this table are hwAPSpWlan, hwAPSpRadio, and hwAPSpApMac.
1.3.6.1.4.1.2011.6.139.11.1.10.1not-accessiblecurrent
hwAPSpWlan
OBJECT-TYPE
This object indicates the WLAN ID. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.10.1.1Unsigned32 (1..16)not-accessiblecurrent
hwAPSpVapProfile
OBJECT-TYPE
This object indicates the bound VAP profile.
1.3.6.1.4.1.2011.6.139.11.1.10.1.2OCTET STRING (SIZE(1..35))read-writecurrent
hwAPSpVapRowStatus
OBJECT-TYPE
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.10.1.3RowStatusread-writecurrent
hwAPSpVapApId
OBJECT-TYPE
This object indicates the AP ID.
1.3.6.1.4.1.2011.6.139.11.1.10.1.4Unsigned32read-onlycurrent
hwAPSpVapServiceVlan
OBJECT-TYPE
This object indicates the service VLAN for the VAP. The invalid value is 0.
1.3.6.1.4.1.2011.6.139.11.1.10.1.5Unsigned32 (0..4094)read-writecurrent
hwAPSpVapVlanPool
OBJECT-TYPE
This object indicates the VLAN pool to which the VAP is bound.
1.3.6.1.4.1.2011.6.139.11.1.10.1.6OCTET STRING (SIZE(0..31))read-writecurrent
hwRegulatoryDomainProfileTable
OBJECT-TYPE
This table is used to configure country codes, calibration channels, and calibration channel bandwidths.
1.3.6.1.4.1.2011.6.139.11.1.11not-accessiblecurrent
hwRegulatoryDomainProfileEntry
OBJECT-TYPE
The index of this table is hwRegulatoryDomainProfileName.
1.3.6.1.4.1.2011.6.139.11.1.11.1not-accessiblecurrent
hwRegulatoryDomainProfileName
OBJECT-TYPE
This object indicates the name of a regulatory domain profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.11.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwCountryCode
OBJECT-TYPE
This object indicates the country code. Its value range is subject to the country code table. The default value is CN.
1.3.6.1.4.1.2011.6.139.11.1.11.1.2OCTET STRING (SIZE(2..8))read-writecurrent
hwDcaChannel5GBandwidth
OBJECT-TYPE
This object indicates the calibration bandwidth on the 5 GHz frequency band. The default value is 1 ? 1: bw20 MHz ? 2: bw40 MHz ? 3: bw80 MHz.
1.3.6.1.4.1.2011.6.139.11.1.11.1.3INTEGER {bw20Mhz(1), bw40Mhz(2), bw80Mhz(3)}read-writecurrent
hwDcaChannel5GChannelSet
OBJECT-TYPE
This object indicates the calibration channel set on the 5 GHz frequency band.
1.3.6.1.4.1.2011.6.139.11.1.11.1.4OCTET STRING (SIZE(1..256))read-writecurrent
hwDcaChannel2GChannelSet
OBJECT-TYPE
This object indicates the calibration channel set on the 2 GHz frequency band.
1.3.6.1.4.1.2011.6.139.11.1.11.1.5OCTET STRING (SIZE(1..256))read-writecurrent
hwRegulatoryDomainProfilRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.
1.3.6.1.4.1.2011.6.139.11.1.11.1.6RowStatusread-writecurrent
hwWlanWideBandEnable
OBJECT-TYPE
This object indicates wide band status. The default value is disable.
1.3.6.1.4.1.2011.6.139.11.1.11.1.7INTEGER {disable(1), enable(2)}read-writecurrent
hwApProfChannelLoadMode
OBJECT-TYPE
This object indicates channel lode mode. The default value is outdoor.
1.3.6.1.4.1.2011.6.139.11.1.11.1.8INTEGER {indoor(1), outdoor(2)}read-writecurrent
hwApSystemProfileTable
OBJECT-TYPE
This table is used to create or delete an AP system profile and configure AP attributes.
1.3.6.1.4.1.2011.6.139.11.1.12not-accessiblecurrent
hwApSystemProfileEntry
OBJECT-TYPE
The index of this table is hwApSystemProfName.
1.3.6.1.4.1.2011.6.139.11.1.12.1not-accessiblecurrent
hwApSystemProfName
OBJECT-TYPE
This object indicates the name of an AP system profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.12.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwApProfStatInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.12.1.3Unsigned32 (60..900)read-writecurrent
hwApProfSampleTime
OBJECT-TYPE
This object indicates the sampling interval for the AC to collecting AP performance data. The default value is 30. It is expressed in seconds.
1.3.6.1.4.1.2011.6.139.11.1.12.1.4Unsigned32 (2..300)read-writecurrent
hwApProfLedSwitch
OBJECT-TYPE
This object indicates whether to enable the AP's LED indicator. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.12.1.5INTEGER {off(1), on(2)}read-writecurrent
hwApProfMaxStaNum
OBJECT-TYPE
This object indicates the maximum number of access users on an AP. The default value is 128.
1.3.6.1.4.1.2011.6.139.11.1.12.1.6Unsigned32 (1..256)read-writecurrent
hwApProfMtu
OBJECT-TYPE
This object indicates the MTU of an AP interface. The default value is 1500.
1.3.6.1.4.1.2011.6.139.11.1.12.1.7Unsigned32 (128..1700)read-writecurrent
hwApProfMeshRole
OBJECT-TYPE
This object indicates a Mesh role. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.12.1.8INTEGER {mp(1), mpp(2)}read-writecurrent
hwApProfTemporaryManagement
OBJECT-TYPE
This object indicates the status of the AP-based offline VAP switch. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.12.1.9INTEGER {disable(1), enable(2)}read-writecurrent
hwApProfManagementVlan
OBJECT-TYPE
This object indicates the management VLAN for APs. The default value is 0xFFFFFFFF.
1.3.6.1.4.1.2011.6.139.11.1.12.1.10Unsigned32 (1..4094 | 4294967295)read-writecurrent
hwApProfHighTempThreshold
OBJECT-TYPE
This object indicates the high temperature alarm threshold on an AP. The default value 0xFFFFFFFF indicates the system threshold of the AP NOTE System thresholds vary with different AP types. For details, see AP device information.
1.3.6.1.4.1.2011.6.139.11.1.12.1.11Unsigned32 (20..110 | 4294967295)read-writecurrent
hwApProfLowTempThreshold
OBJECT-TYPE
This object indicates the low temperature alarm threshold on an AP. The default value 0xFFFF indicates the system threshold of the AP.
1.3.6.1.4.1.2011.6.139.11.1.12.1.12Integer32 (-70..10 | 65535)read-writecurrent
hwApProfOpHRxPowerThreshold
OBJECT-TYPE
This object indicates the high power threshold of an optical module. The default value is 1000.
1.3.6.1.4.1.2011.6.139.11.1.12.1.13Unsigned32 (1000..65535)read-writecurrent
hwApProfOpLRxPowerThreshold
OBJECT-TYPE
This object indicates the low power threshold of an optical module. The default value is 50.
1.3.6.1.4.1.2011.6.139.11.1.12.1.14Unsigned32 (1..250)read-writecurrent
hwApProfOpHTempThreshold
OBJECT-TYPE
This object indicates the high temperature threshold of an optical module. The default value is 70.
1.3.6.1.4.1.2011.6.139.11.1.12.1.15Unsigned32 (70..125)read-writecurrent
hwApProfOpLTempThreshold
OBJECT-TYPE
This object indicates the low temperature threshold of an optical module. The default value is -5.
1.3.6.1.4.1.2011.6.139.11.1.12.1.16Integer32 (-40..-5)read-writecurrent
hwApProfMemoryUsageThreshold
OBJECT-TYPE
This object indicates the memory usage alarm threshold of an AP. The default value is 80. It is expressed in percentage.
1.3.6.1.4.1.2011.6.139.11.1.12.1.17Unsigned32 (30..100)read-writecurrent
hwApProfCpuUsageThreshold
OBJECT-TYPE
This object indicates the CPU usage alarm threshold of an AP. The default value is 90. It is expressed in percentage.
1.3.6.1.4.1.2011.6.139.11.1.12.1.18Unsigned32 (50..100)read-writecurrent
hwApProfTelnetSwitch
OBJECT-TYPE
This object indicates whether to enable Telnet. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.12.1.19INTEGER {disable(1), enable(2)}read-writecurrent
hwApProfSTelnetSwitch
OBJECT-TYPE
This object indicates whether to enable SSH. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.12.1.20INTEGER {disable(1), enable(2)}read-writecurrent
hwApProfConsoleSwitch
OBJECT-TYPE
This object indicates whether to enable the console. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.12.1.21INTEGER {disable(1), enable(2)}read-writecurrent
hwApProfLogRecordLevel
OBJECT-TYPE
This object indicates the log backup level. The default value is 7.
1.3.6.1.4.1.2011.6.139.11.1.12.1.22INTEGER {emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), info(7), debug(8)}read-writecurrent
hwApProfLogServerIp
OBJECT-TYPE
This object indicates the IP address of the log server.
1.3.6.1.4.1.2011.6.139.11.1.12.1.23IpAddressread-writecurrent
hwApProfLogServerIpv6
OBJECT-TYPE
This object indicates the IPv6 address of the log server.
1.3.6.1.4.1.2011.6.139.11.1.12.1.24OCTET STRINGread-writecurrent
hwApProfAlarmRestrictionSwitch
OBJECT-TYPE
This object indicates the status of the alarm suppression switch. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.12.1.25INTEGER {disable(1), enable(2)}read-writecurrent
hwApProfAlarmRestrictionPeriod
OBJECT-TYPE
This object indicates the alarm suppression period. The default value is 60 seconds.
1.3.6.1.4.1.2011.6.139.11.1.12.1.26Unsigned32 (10..300)read-writecurrent
hwApProfKeepServiceSwitch
OBJECT-TYPE
This object indicates whether to enable the offline service retaining function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.12.1.27INTEGER {enable(1), disable(2), allowaccess(3), allowAccessAlsoNoauth(4)}read-writecurrent
hwApProfProtectPriority
OBJECT-TYPE
This object indicates the AC priority. A smaller value indicates a higher priority. The default value 0xFFFFFFFF indicates that no priority is configured.
1.3.6.1.4.1.2011.6.139.11.1.12.1.28Unsigned32 (0..7 | 4294967295)read-writecurrent
hwApProfProtectACIp
OBJECT-TYPE
This object indicates the IP address of the standby AC.
1.3.6.1.4.1.2011.6.139.11.1.12.1.29IpAddressread-writecurrent
hwApProfProtectACIpv6
OBJECT-TYPE
This object indicates the IPv6 address of the standby AC.
1.3.6.1.4.1.2011.6.139.11.1.12.1.30OCTET STRINGread-writecurrent
hwApProfEapStartMode
OBJECT-TYPE
This object indicates the EAP Start packet conversion mode. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.12.1.31INTEGER {broadcast(1), multicast(2), unicast(3)}read-writecurrent
hwApProfEapStartTransform
OBJECT-TYPE
This object indicates the EAP Start packet conversion mode. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.12.1.32INTEGER {equalBssid(1), always(2)}read-writecurrent
hwApProfEapStartUnicastMac
OBJECT-TYPE
This object indicates that EAP Start packets are converted to those with specific MAC addresses.
1.3.6.1.4.1.2011.6.139.11.1.12.1.33MacAddressread-writecurrent
hwApProfEapResponseMode
OBJECT-TYPE
This object indicates the EAP Response packet conversion mode. The default value is 4.
1.3.6.1.4.1.2011.6.139.11.1.12.1.34INTEGER {broadcast(1), multicast(2), specific(3), learnling(4)}read-writecurrent
hwApProfEapResponseTransform
OBJECT-TYPE
This object indicates the EAP Response packet conversion mode. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.12.1.35INTEGER {equalBssid(1), always(2)}read-writecurrent
hwApProfEapResponseUnicastMac
OBJECT-TYPE
This object indicates that EAP Response packets are converted to those with specific MAC addresses.
1.3.6.1.4.1.2011.6.139.11.1.12.1.36MacAddressread-writecurrent
hwApProfLldpRestartDelay
OBJECT-TYPE
This object indicates the delay for re-enabling LLDP. The default value is 2. It is expressed in seconds.
1.3.6.1.4.1.2011.6.139.11.1.12.1.37Unsigned32 (1..10)read-writecurrent
hwApProfLldpAdminStatus
OBJECT-TYPE
This object indicates the operation mode of LLDP. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.12.1.38INTEGER {txrx(1), rx(2), tx(3)}read-writecurrent
hwApProfLldpRetransDelay
OBJECT-TYPE
This object indicates the message retransmitting delay. The default value is 2. It is expressed in seconds.
1.3.6.1.4.1.2011.6.139.11.1.12.1.39Unsigned32 (1..8192)read-writecurrent
hwApProfLldpRetransHoldMultiplier
OBJECT-TYPE
This object indicates the hold time multiplier of device information on neighbors (cardinal number is the interval time). The default value is 4.
1.3.6.1.4.1.2011.6.139.11.1.12.1.40Unsigned32 (2..10)read-writecurrent
hwApProfLldpInterval
OBJECT-TYPE
This object indicates the interval at which LLDP packets are sent. The default value is 30 seconds.
1.3.6.1.4.1.2011.6.139.11.1.12.1.41Unsigned32 (5..32768)read-writecurrent
hwApProfLldpReportInterval
OBJECT-TYPE
This object indicates the interval at which LLDP packets are reported. The default value is 30 seconds.
1.3.6.1.4.1.2011.6.139.11.1.12.1.42Unsigned32 (5..3600)read-writecurrent
hwApProfStaAccessMode
OBJECT-TYPE
This object indicates the access mode. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.12.1.43INTEGER {unknown(-1), disable(1), blacklist(2), whitelist(3)}read-writecurrent
hwApProfStaAccessModeProfile
OBJECT-TYPE
This object indicates blacklist and whitelist profiles.
1.3.6.1.4.1.2011.6.139.11.1.12.1.44OCTET STRING (SIZE(0..35))read-writecurrent
hwApProfRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.
1.3.6.1.4.1.2011.6.139.11.1.12.1.45RowStatusread-writecurrent
hwApProfSFTPSwitch
OBJECT-TYPE
This object indicates whether to enable the SFTP. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.12.1.46INTEGER {disable(1), enable(2)}read-writecurrent
hwApProfDynamicBlackListAgingTime
OBJECT-TYPE
This object indicates the aging time of the dynamic blacklist entries. The default value is 300.
1.3.6.1.4.1.2011.6.139.11.1.12.1.47Unsigned32 (180..3600)read-writecurrent
hwApProfAntennaOutputMode
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.12.1.48INTEGER {combine(1), split(2)}read-writecurrent
hwApProfMppActiveReselectionSwitch
OBJECT-TYPE
This object indicates of mpp active reselection.
1.3.6.1.4.1.2011.6.139.11.1.12.1.49INTEGER {disable(1), enable(2)}read-writecurrent
hwApProfSpectrumServerIPAddress
OBJECT-TYPE
This object indicates the IPv6 address of the spectrum analysis server. You choose an IPv4 or IPv6 address. By default, the IPv4 address 255.255.255.255 is used.
1.3.6.1.4.1.2011.6.139.11.1.12.1.50IpAddressread-writecurrent
hwApProfSpectrumServerIPv6Address
OBJECT-TYPE
This object indicates the IPv6 address of the spectrum analysis server. You choose an IPv4 or IPv6 address. By default, it is not configured.
1.3.6.1.4.1.2011.6.139.11.1.12.1.51OCTET STRINGread-writecurrent
hwApProfSpectrumServerPort
OBJECT-TYPE
This object indicates the port of the spectrum analysis server. The default value is 0.
1.3.6.1.4.1.2011.6.139.11.1.12.1.52Unsigned32 (0 | 1..65535)read-writecurrent
hwApProfSpectrumViaACSwitch
OBJECT-TYPE
This object indicates the status of the spectrum analysis function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.12.1.53INTEGER {disable(1), enable(2)}read-writecurrent
hwApProfSpectrumViaACPort
OBJECT-TYPE
This object indicates the port number used by the AP to report spectrum analysis data to the AC. The default value is 0.
1.3.6.1.4.1.2011.6.139.11.1.12.1.54Unsigned32 (0 | 5000..65535)read-writecurrent
hwApProfSpectrumNonWifiDeviceAgingTime
OBJECT-TYPE
This object indicates the aging time of non-WLAN devices on the AC. The default value is 3 minutes.
1.3.6.1.4.1.2011.6.139.11.1.12.1.55Unsigned32 (1..30)read-writecurrent
hwApProfPoeMaxPower
OBJECT-TYPE
This object indicates the maximum output power of the AP.The default value is 750000.
1.3.6.1.4.1.2011.6.139.11.1.12.1.56Unsigned32 (15400..750000)read-writecurrent
hwApProfPoePowerReserved
OBJECT-TYPE
This object indicates the percentage of reserved PoE power to the available PoE power.The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.12.1.57Unsigned32 (0..100 | 255)read-writecurrent
hwApProfPoePowerThreshold
OBJECT-TYPE
This object indicates the alarm threshold of PoE power consumption percentage.The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.12.1.58Unsigned32 (0..100 | 255)read-writecurrent
hwApProfPoeAfInrushSwitch
OBJECT-TYPE
This object indicates whether to enable the IEEE 802.3at-compliant device to provide power in accordance with IEEE 802.3af.The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.12.1.59INTEGER {disable(1), enable(2)}read-writecurrent
hwApProfPoeHighInrushSwitch
OBJECT-TYPE
This object indicates whether to enable the device to allow high inrush current during power-on.The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.12.1.60INTEGER {disable(1), enable(2)}read-writecurrent
hwApProfPrimaryLinkIPv4
OBJECT-TYPE
This object indicates the IP address of the primary AC.
1.3.6.1.4.1.2011.6.139.11.1.12.1.61IpAddressread-writecurrent
hwApProfPrimaryLinkIPv6
OBJECT-TYPE
This object indicates the IPv6 address of the primary AC.
1.3.6.1.4.1.2011.6.139.11.1.12.1.62OCTET STRINGread-writecurrent
hwApProfBackupLinkIPv4
OBJECT-TYPE
This object indicates the IP address of the backup AC.
1.3.6.1.4.1.2011.6.139.11.1.12.1.63IpAddressread-writecurrent
hwApProfBackupLinkIPv6
OBJECT-TYPE
This object indicates the IPv6 address of the backup AC.
1.3.6.1.4.1.2011.6.139.11.1.12.1.64OCTET STRINGread-writecurrent
hwApProfLedOffTimeRange
OBJECT-TYPE
This object indicates whether to make a configured Led off time range effective.
1.3.6.1.4.1.2011.6.139.11.1.12.1.65OCTET STRING (SIZE(0..32))read-writecurrent
hwApProfUsbSwitch
OBJECT-TYPE
This object indicates whether to enable the USB. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.12.1.66INTEGER {disable(1), enable(2), enable5w(3)}read-writecurrent
hwApProfBroadcastSuppressionArpEnable
OBJECT-TYPE
This object indicates whether to enable the arp broadcast suppression.The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.12.1.67INTEGER {disable(1), enable(2)}read-writecurrent
hwApProfBroadcastSuppressionArpThreshold
OBJECT-TYPE
This object indicates the threshold of arp broadcast suppression. The default value is 256.
1.3.6.1.4.1.2011.6.139.11.1.12.1.68Unsigned32 (64..1024)read-writecurrent
hwApProfBroadcastSuppressionIgmpEnable
OBJECT-TYPE
This object indicates whether to enable the igmp broadcast suppression.The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.12.1.69INTEGER {disable(1), enable(2)}read-writecurrent
hwApProfBroadcastSuppressionIgmpThreshold
OBJECT-TYPE
This object indicates the threshold of igmp broadcast suppression. The default value is 256.
1.3.6.1.4.1.2011.6.139.11.1.12.1.70Unsigned32 (64..1024)read-writecurrent
hwApProfBroadcastSuppressionNdEnable
OBJECT-TYPE
This object indicates whether to enable the nd broadcast suppression.The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.12.1.71INTEGER {disable(1), enable(2)}read-writecurrent
hwApProfBroadcastSuppressionNdThreshold
OBJECT-TYPE
This object indicates the threshold of nd broadcast suppression. The default value is 256.
1.3.6.1.4.1.2011.6.139.11.1.12.1.72Unsigned32 (64..1024)read-writecurrent
hwApProfBroadcastSuppressionOtherEnable
OBJECT-TYPE
This object indicates whether to enable the other broadcast suppression.The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.12.1.73INTEGER {disable(1), enable(2)}read-writecurrent
hwApProfBroadcastSuppressionOtherThreshold
OBJECT-TYPE
This object indicates the threshold of other broadcast suppression. The default value is 256.
1.3.6.1.4.1.2011.6.139.11.1.12.1.74Unsigned32 (64..1024)read-writecurrent
hwApProfBroadcastSuppressionAllEnable
OBJECT-TYPE
This object indicates whether to enable all the broadcast suppression.The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.12.1.75INTEGER {disable(1), enable(2)}read-writecurrent
hwApProfCapwapDtlsDataSwitch
OBJECT-TYPE
This object indicates the status of the DTLS function of data-link. The default value is 3.
1.3.6.1.4.1.2011.6.139.11.1.12.1.76INTEGER {disable(1), enable(2), notconfig(3)}read-writecurrent
hwApProfTemporaryManagementPsk
OBJECT-TYPE
This object indicates the psk of the AP-based offline VAP.
1.3.6.1.4.1.2011.6.139.11.1.12.1.77OCTET STRING (SIZE(6 | 8..108))read-writecurrent
hwApProfProtectLinkSwitchMode
OBJECT-TYPE
This object indicates the mode of the ac protect link-switch. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.12.1.78INTEGER {priority(1), networkstabilization(2)}read-writecurrent
hwApProfProtectLinkSwitchEchoProbeTime
OBJECT-TYPE
This object indicates the time of echo probe. The default value is 20.
1.3.6.1.4.1.2011.6.139.11.1.12.1.79Unsigned32 (6..100)read-writecurrent
hwApProfProtectLinkSwitchStartThreshold
OBJECT-TYPE
This object indicates the start threshold of packet-loss rate. The default value is 20.
1.3.6.1.4.1.2011.6.139.11.1.12.1.80Unsigned32 (5..60)read-writecurrent
hwApProfProtectLinkSwitchGapThreshold
OBJECT-TYPE
This object indicates the gap threshold of packet-loss rate. The default value is 15.
1.3.6.1.4.1.2011.6.139.11.1.12.1.81Unsigned32 (5..60)read-writecurrent
hwApProfCardConnectType
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.12.1.82INTEGER {serial(1), ethernet(2)}read-writecurrent
hwApProfLldpReportEnable
OBJECT-TYPE
This object indicates whether to enable the lldp report .The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.12.1.83INTEGER {disable(1), enable(2)}read-writecurrent
hwApProfDhcpv4Option12
OBJECT-TYPE
This object indicates the type of dhcpve option12 .The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.12.1.84INTEGER {apTypeApMac(1), apName(2), disable(3)}read-writecurrent
hwApProfBcSuppresionAutoDetectThreshold
OBJECT-TYPE
This object indicates the value of broadcast value .The default value is 256.
1.3.6.1.4.1.2011.6.139.11.1.12.1.85Unsigned32 (64..1024)read-writecurrent
hwApProfMcSuppresionAutoDetectThreshold
OBJECT-TYPE
This object indicates the value of multicast value .The default value is 256.
1.3.6.1.4.1.2011.6.139.11.1.12.1.86Unsigned32 (64..1024)read-writecurrent
hwApProfUcSuppresionAutoDetectThreshold
OBJECT-TYPE
This object indicates the value of unicast value .The default value is 256.
1.3.6.1.4.1.2011.6.139.11.1.12.1.87Unsigned32 (64..1024)read-writecurrent
hwApProfConsoleBLEMode
OBJECT-TYPE
This object indicates the type of ble console .The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.12.1.88INTEGER {disable(1), dynamic(2), persistent(3)}read-writecurrent
hwApProfDiskUsageThreshold
OBJECT-TYPE
This object indicates the AP disk usage rate alarm threshold. The default value is 95.
1.3.6.1.4.1.2011.6.139.11.1.12.1.89Unsigned32 (6..100)read-writecurrent
hwApProfLogServerPort
OBJECT-TYPE
This object indicates syslog server port. The default value is 514.
1.3.6.1.4.1.2011.6.139.11.1.12.1.90Unsigned32 (0..65535)read-writecurrent
hwApProfStationConnectivityDetectSwitch
OBJECT-TYPE
This object indicates whether to disable the Station Connectivity Detect. The default value is enable.
1.3.6.1.4.1.2011.6.139.11.1.12.1.91INTEGER {disable(1), enable(2)}read-writecurrent
hwApProfStaArpNDProxyBeforeAssoc
OBJECT-TYPE
This object indicates the mode of the station arp-nd-proxy before association .The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.12.1.92INTEGER {no(1), yes(2)}read-writecurrent
hwApProfUcSuppressionAutoDetectSwitch
OBJECT-TYPE
This object indicates the switch of the unicast-suppression auto detect .The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.12.1.93INTEGER {disable(1), enable(2)}read-writecurrent
hwApProfPkiCertFileType
OBJECT-TYPE
This object indicates the AP PKI certificate file type.
1.3.6.1.4.1.2011.6.139.11.1.12.1.94INTEGER {pem(1), pkcs12(2), invalid(255)}read-writecurrent
hwApProfPkiCertFileName
OBJECT-TYPE
This object indicates the AP PKI certificate filename.
1.3.6.1.4.1.2011.6.139.11.1.12.1.95OCTET STRING (SIZE(0..63))read-writecurrent
hwApProfPkiCertFilePassword
OBJECT-TYPE
This object indicates the AP PKI certificate file password.
1.3.6.1.4.1.2011.6.139.11.1.12.1.96OCTET STRING (SIZE(6..68))read-writecurrent
hwApProfHighTempApEnvironmentThreshold
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.12.1.97Unsigned32 (4294967295 | 20..110)read-writecurrent
hwApProfHighTempCpuThreshold
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.12.1.98Unsigned32 (4294967295 | 20..110)read-writecurrent
hwApProfHighTempNpThreshold
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.12.1.99Unsigned32 (4294967295 | 20..110)read-writecurrent
hwApProfLowTempApEnvironmentThreshold
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.12.1.100Integer32 (-70..10 | 65535)read-writecurrent
hwApProfLowTempCpuThreshold
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.12.1.101Integer32 (-70..10 | 65535)read-writecurrent
hwApProfLowTempNpThreshold
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.12.1.102Integer32 (-70..10)read-writecurrent
hwApSystemProfileNPFastForwardingSwitch
OBJECT-TYPE
This object indicates whether to enable the NP fast forwarding function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.12.1.103INTEGER {enable(1), disable(2)}read-writecurrent
hwApSystemProfileNPCapwapReassemblySwitch
OBJECT-TYPE
This object indicates whether to enable the NP capwap reassembly function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.12.1.104INTEGER {enable(1), disable(2)}read-writecurrent
hwApProfRadioMode
OBJECT-TYPE
This object indicates the radio mode for AP. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.12.1.105INTEGER {twoRadioStandard(1), twoRadio5gEnhanced(2), twoRadio2gEnhanced(3), threeRadio(4), twoRadioIndependentScan(5), default(255)}read-writecurrent
hwApProfPowerForceWorkmode
OBJECT-TYPE
This object indicates the force workmode of power. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.12.1.106INTEGER {af(1), at(2), bt60(3), bt90(4), invalid(255)}read-writecurrent
hwAPWiredPortProfileTable
OBJECT-TYPE
This table is used to create or delete an AP wired port link profile and modify or query attributes.
1.3.6.1.4.1.2011.6.139.11.1.13not-accessiblecurrent
hwAPWiredPortProfileEntry
OBJECT-TYPE
The index of this table is hwAPWiredPortProfileName.
1.3.6.1.4.1.2011.6.139.11.1.13.1not-accessiblecurrent
hwAPWiredPortProfileName
OBJECT-TYPE
This object indicates the name of an AP wired port link profile.
1.3.6.1.4.1.2011.6.139.11.1.13.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwAPWiredPortPortLinkProfileName
OBJECT-TYPE
This object indicates the bound AP wired port link profile.
1.3.6.1.4.1.2011.6.139.11.1.13.1.2OCTET STRING (SIZE(1..35))read-writecurrent
hwAPWiredPortProfilePortDesc
OBJECT-TYPE
This object indicates the description of an interface.
1.3.6.1.4.1.2011.6.139.11.1.13.1.3OCTET STRING (SIZE(0..242))read-writecurrent
hwAPWiredPortProfilePortEthTrunkID
OBJECT-TYPE
This object indicates the ID of a Trunk. 0 is valid and 0xFFFFFFFF is invalid. The default value is 0xFFFFFFFF.
1.3.6.1.4.1.2011.6.139.11.1.13.1.4Unsigned32 (0 | 255)read-writecurrent
hwAPWiredPortProfilePortSTPSwitch
OBJECT-TYPE
This object indicates whether to enable STP on wired ports. The default value is 3.
1.3.6.1.4.1.2011.6.139.11.1.13.1.5INTEGER {disable(1), enable(2), auto(3)}read-writecurrent
hwAPWiredPortProfilePortMode
OBJECT-TYPE
This object indicates the mode of the wired port. the default value is 256.
1.3.6.1.4.1.2011.6.139.11.1.13.1.6INTEGER {root(1), endpoint(2), middle(3), null(256)}read-writecurrent
hwAPWiredPortProfilePortVlanPvid
OBJECT-TYPE
This object indicates the PVID of a port. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.13.1.7Unsigned32 (0..4094)read-writecurrent
hwAPWiredPortProfilePortVlanTagged
OBJECT-TYPE
This object indicates whether to tag ports with VLAN IDs. The default value is 0.
1.3.6.1.4.1.2011.6.139.11.1.13.1.8OCTET STRING (SIZE(0..1024))read-writecurrent
hwAPWiredPortProfilePortVlanUntagged
OBJECT-TYPE
This object indicates whether to untag VLAN IDS from ports. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.13.1.9OCTET STRING (SIZE(0..1024))read-writecurrent
hwAPWiredPortProfileUserIsolate
OBJECT-TYPE
This object indicates the status of the user isolation function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.13.1.10INTEGER {disable(1), l3Isolate(2), l2Isolate(3)}read-writecurrent
hwAPWiredPortProfileDhcpTrust
OBJECT-TYPE
This object indicates whether a port is configured as a DHCP trusted port. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.13.1.11INTEGER {disable(1), enable(2)}read-writecurrent
hwAPWiredPortProfileNdTrust
OBJECT-TYPE
This object indicates whether a port is configured as a ND trusted port. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.13.1.12INTEGER {disable(1), enable(2)}read-writecurrent
hwAPWiredPortProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.13.1.13RowStatusread-createcurrent
hwAPWiredPortProfileLearnAddress
OBJECT-TYPE
This object indicates whether to enable ipv4 address learning.The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.13.1.14INTEGER {disable(1), enable(2)}read-writecurrent
hwAPWiredPortProfileIpBindCheck
OBJECT-TYPE
This object indicates whether to enable IP packet checking against the binding table.The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.13.1.15INTEGER {disable(1), enable(2)}read-writecurrent
hwAPWiredPortProfileArpBindCheck
OBJECT-TYPE
This object indicates whether to enable ARP packet checking against the binding table.The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.13.1.16INTEGER {disable(1), enable(2)}read-writecurrent
hwAPWiredPortProfileSTPAutoShutdown
OBJECT-TYPE
This object indicates whether to enable STP-triggered port shutdown.The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.13.1.17INTEGER {disable(1), enable(2)}read-writecurrent
hwAPWiredPortProfileSTPAutoShutdownRecoveryTime
OBJECT-TYPE
This object indicates the automatic port recovery time after an STP-triggered shutdown.The default value is 600.
1.3.6.1.4.1.2011.6.139.11.1.13.1.18Unsigned32 (600..3600)read-writecurrent
hwAPWiredPortProfileTrafficOptimizeSuppressionBc
OBJECT-TYPE
This object indicates the rate limit for broadcast storm suppression.The default value is 0xFFFFFFFF.
1.3.6.1.4.1.2011.6.139.11.1.13.1.19Unsigned32 (0..14881000)read-writecurrent
hwAPWiredPortProfileTrafficOptimizeSuppressionUc
OBJECT-TYPE
This object indicates the rate limit for unknown unicast storm suppression.The default value is 0xFFFFFFFF.
1.3.6.1.4.1.2011.6.139.11.1.13.1.20Unsigned32 (0..14881000)read-writecurrent
hwAPWiredPortProfileTrafficOptimizeSuppressionMc
OBJECT-TYPE
This object indicates the rate limit for multicast storm suppression.The default value is 0xFFFFFFFF.
1.3.6.1.4.1.2011.6.139.11.1.13.1.21Unsigned32 (0..14881000)read-writecurrent
hwAPWiredPortProfileIGMPSnooping
OBJECT-TYPE
This object indicates whether to enable IGMP-snooping.The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.13.1.22INTEGER {disable(1), enable(2)}read-writecurrent
hwAPWiredPortProfileLearnIpv6Address
OBJECT-TYPE
This object indicates whether to enable ipv6 address learning.The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.13.1.23INTEGER {disable(1), enable(2)}read-writecurrent
hwAPWiredPortProfileMLDSnooping
OBJECT-TYPE
This object indicates whether to enable MLD-snooping.The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.13.1.24INTEGER {disable(1), enable(2)}read-writecurrent
hwAPWiredPortProfileTrafficOptimizeTcpAdjustMss
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.13.1.25Unsigned32 (4294967295 | 128..2048)read-writecurrent
hwAPWiredPortProfilePortSec
OBJECT-TYPE
This object indicates the status of the port security function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.13.1.26INTEGER {disable(1), enable(2)}read-writecurrent
hwAPWiredPortProfilePortSecMACMaxNum
OBJECT-TYPE
This object indicates the max number of the port security mac. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.13.1.27Integer32 (1..64)read-writecurrent
hwAPWiredPortProfilePortSecStickyMac
OBJECT-TYPE
This object indicates the status of the port security sticky mac function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.13.1.28INTEGER {disable(1), enable(2)}read-writecurrent
hwAPWiredPortProfilePortSecProtectAction
OBJECT-TYPE
This object indicates the protect action of the port security function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.13.1.29INTEGER {restrict(1), protect(2)}read-writecurrent
hwAPWiredPortProfilePortForwardMode
OBJECT-TYPE
This object indicates whether to config port forward mode.The default value is direct forward.
1.3.6.1.4.1.2011.6.139.11.1.13.1.30INTEGER {directForward(1), tunnel(2)}read-writecurrent
hwAPWiredPortDot1xClientProfileName
OBJECT-TYPE
This object indicates the bound dot1x client profile.
1.3.6.1.4.1.2011.6.139.11.1.13.1.31OCTET STRING (SIZE(0..31))read-writecurrent
hwAPWiredPortProfileLoopbackDetect
OBJECT-TYPE
This object indicates whether to enable Loopback detection on wired ports. The default value is disable(1).
1.3.6.1.4.1.2011.6.139.11.1.13.1.32INTEGER {disable(1), enable(2)}read-writecurrent
hwAPWiredPortProfileTrafficFilterTable
OBJECT-TYPE
This table is used to configure ACL-based packet filtering in an AP wired port profile.
1.3.6.1.4.1.2011.6.139.11.1.14not-accessiblecurrent
hwAPWiredPortProfileTrafficFilterEntry
OBJECT-TYPE
Indexes of this table are hwAPWiredPortProfileName.
1.3.6.1.4.1.2011.6.139.11.1.14.1not-accessiblecurrent
hwAPWiredPortProfileTrafficFilterDirection
OBJECT-TYPE
This object indicates the direction of the ACL-based packet filtering.
1.3.6.1.4.1.2011.6.139.11.1.14.1.1INTEGER {inbound(1), outbound(2)}not-accessiblecurrent
hwAPWiredPortProfileTrafficFilterType
OBJECT-TYPE
This object indicates the type of the ACL-based packet filtering.
1.3.6.1.4.1.2011.6.139.11.1.14.1.2INTEGER {ipv4(1), ipv6(2), l2(3)}not-accessiblecurrent
hwAPWiredPortProfileTrafficFilterAclID
OBJECT-TYPE
This object indicates ACL rules for packet filtering.
1.3.6.1.4.1.2011.6.139.11.1.14.1.3Integer32 (3000..3031 | 4000..4031)read-writecurrent
hwAPWiredPortProfileTrafficFilterRowStatus
OBJECT-TYPE
This object indicates packet filtering rules configured on the wired interface.
1.3.6.1.4.1.2011.6.139.11.1.14.1.4RowStatusread-createcurrent
hwAPPortLinkProfileTable
OBJECT-TYPE
This table is used to create or delete an AP wired port link profile and configure parameters.
1.3.6.1.4.1.2011.6.139.11.1.15not-accessiblecurrent
hwAPPortLinkProfileEntry
OBJECT-TYPE
The index of this table is hwAPPortLinkProfileName.
1.3.6.1.4.1.2011.6.139.11.1.15.1not-accessiblecurrent
hwAPPortLinkProfileName
OBJECT-TYPE
This object indicates the name of an AP wired port link profile.
1.3.6.1.4.1.2011.6.139.11.1.15.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwAPPortLinkProfileLldpEnable
OBJECT-TYPE
This object indicates the status of the LLDP function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.15.1.2INTEGER {disable(1), enable(2)}read-writecurrent
hwAPPortLinkProfileLldpTlvType
OBJECT-TYPE
This object indicates the types of TLVs that can be advertised from an AP's wired port. The default value is all(31) ? 0: invalid ? bit0: management-address ? bit1: port-description ? bit2: system-capability ? bit3: system-description ? bit4: system-name.
1.3.6.1.4.1.2011.6.139.11.1.15.1.3Unsigned32 (0..31)read-writecurrent
hwAPPortLinkProfileCrcAlarmEnable
OBJECT-TYPE
This object indicates the status of the CRC error alarm function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.15.1.4INTEGER {disable(1), enable(2)}read-writecurrent
hwAPPortLinkProfileCrcAlarmThreshold
OBJECT-TYPE
This object indicates a CRC error alarm threshold. The default value is 50. The unit is 1/10000.
1.3.6.1.4.1.2011.6.139.11.1.15.1.5Unsigned32 (1..100)read-writecurrent
hwAPPortLinkProfileCrcAlarmResumeThreshold
OBJECT-TYPE
This object indicates a CRC error alarm clearing threshold. The default value is 20. The unit is 1/10000.
1.3.6.1.4.1.2011.6.139.11.1.15.1.6Unsigned32 (1..100)read-writecurrent
hwAPPortLinkProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE:notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.
1.3.6.1.4.1.2011.6.139.11.1.15.1.7RowStatusread-createcurrent
hwAPPortLinkProfilePoeSwitch
OBJECT-TYPE
This object indicates whether to enable the PoE function on the interface.The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.15.1.8INTEGER {disable(1), enable(2)}read-writecurrent
hwAPPortLinkProfilePoePriority
OBJECT-TYPE
This object indicates the power priority of PoE interfaces.The default value is 3.
1.3.6.1.4.1.2011.6.139.11.1.15.1.9INTEGER {critical(1), high(2), low(3)}read-writecurrent
hwAPPortLinkProfilePoeForcePowerSwitch
OBJECT-TYPE
This object indicates whether to enable forcible PoE power supply on an interface.The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.15.1.10INTEGER {disable(1), enable(2)}read-writecurrent
hwAPPortLinkProfilePoeLegacySwitch
OBJECT-TYPE
This object indicates whether to enable the PSE to check compatibility of the connected PDs.The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.15.1.11INTEGER {disable(1), enable(2)}read-writecurrent
hwAPPortLinkProfilePoeOffTimeRange
OBJECT-TYPE
This object indicates whether to make a configured PoE power-off time range effective on interfaces.
1.3.6.1.4.1.2011.6.139.11.1.15.1.12OCTET STRING (SIZE(0..32))read-writecurrent
hwAPPortLinkProfileAdminStatus
OBJECT-TYPE
This object indicates whether to enable port shutdown.The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.15.1.13INTEGER {down(1), up(2)}read-writecurrent
hwAPPortLinkProfileLldpdot3TlvType
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.15.1.14Unsigned32 (0..31)read-writecurrent
hwAPPortLinkProfileLldpdot3PowerFormat
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.15.1.15INTEGER {default(1), ab(2), at(3), bt(4)}read-writecurrent
hwAPPortLinkProfileLldpLegacyTlvType
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.15.1.16Unsigned32 (0..31)read-writecurrent
hwAPPortLinkProfileLldpLegacyPowerCapability
OBJECT-TYPE
This object indicates whether to enable the Power Capability.The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.15.1.17INTEGER {enable(1), disable(2)}read-writecurrent
hwAPPortLinkProfileSpeed
OBJECT-TYPE
Configure the speed of AP interface.
1.3.6.1.4.1.2011.6.139.11.1.15.1.18Unsigned32 (100 | 1000 | 2500 | 5000 | 10000 | 65535)read-writecurrent
hw2gRadioProfileTable
OBJECT-TYPE
This table is used to configure 2.4 GHz radio parameters, including physical radio parameters such as channel, power, antenna gain, and working mode, and bind air scan and RRM profiles.
1.3.6.1.4.1.2011.6.139.11.1.16not-accessiblecurrent
hw2gRadioProfileEntry
OBJECT-TYPE
The index of this table is hw2gRadioProfileName.
1.3.6.1.4.1.2011.6.139.11.1.16.1not-accessiblecurrent
hw2gRadioProfileName
OBJECT-TYPE
This object indicates the name of a 2G radio profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.16.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hw2gRadioBeaconInterval
OBJECT-TYPE
This object indicates a Beacon interval. The default value is 100. It is expressed in ms.
1.3.6.1.4.1.2011.6.139.11.1.16.1.6Unsigned32 (60..1000)read-writecurrent
hw2gRadioGuardIntervalMode
OBJECT-TYPE
This object indicates the GI mode. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.16.1.10INTEGER {short(1), normal(2)}read-writecurrent
hw2gRadioShortPreamble
OBJECT-TYPE
This object indicates the preamble mode. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.16.1.11INTEGER {disable(1), enable(2)}read-writecurrent
hw2gRadioFragmentationThreshold
OBJECT-TYPE
This object indicates the packet fragmentation threshold. The default value is 2346. It is expressed in bytes.
1.3.6.1.4.1.2011.6.139.11.1.16.1.12Integer32 (256..2346)read-writecurrent
hw2gRadioHtAmpduSwitch
OBJECT-TYPE
This object indicates the status of the aggregation function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.16.1.13INTEGER {disable(1), enable(2)}read-writecurrent
hw2gRadioHtAmpduMaxLengthExponent
OBJECT-TYPE
This object indicates the maximum length of frames converged by an MPDU. The default value is 3 ? 0: 8191 bytes ? 1: 16383 bytes ? 2: 32767 bytes ? 3: 65535 bytes.
1.3.6.1.4.1.2011.6.139.11.1.16.1.14Integer32 (0..3)read-writecurrent
hw2gRadioDot11bgBasicRate
OBJECT-TYPE
This object indicates the basic rate set of the 802.11bg protocol. The default value is 3 ? bit0: 1 Mbit/s ? bit1: 2 Mbit/s ? bit2: 5.5 Mbit/s ? bit3: 6 Mbit/s ? bit4: 9 Mbit/s ? bit5: 11 Mbit/s ? bit6: 12 Mbit/s ? bit7: 18 Mbit/s ? bit8: 24 Mbit/s ? bit9: 36 Mbit/s ? bit10: 48 Mbit/s ? bit11: 54 Mbit/s.
1.3.6.1.4.1.2011.6.139.11.1.16.1.15Unsigned32 (1..4095)read-writecurrent
hw2gRadioDot11bgSupportRate
OBJECT-TYPE
This object indicates the supported rate set of the 802.11bg protocol. The default value is 0xFFF ? bit0: 1 Mbit/s? bit1: 2 Mbit/s? bit2: 5.5 Mbit/s? bit3: 6 Mbit/s? bit4: 9 Mbit/s? bit5: 11 Mbit/s? bit6: 12 Mbit/s ? bit7: 18 Mbit/s? bit8: 24 Mbit/s? bit9: 36 Mbit/s? bit10: 48 Mbit/s? bit11: 54 Mbit/s.
1.3.6.1.4.1.2011.6.139.11.1.16.1.16Unsigned32 (1..4095)read-writecurrent
hw2gRadioMulticastRate
OBJECT-TYPE
This object indicates the multicast rate. The default value is 0x2F ? bit0: 1 Mbit/s ? bit1: 2 Mbit/s ? bit2: 5.5 Mbit/s ? bit3: 6 Mbit/s ? bit4: 9 Mbit/s ? bit5: 11 Mbit/s ? bit6: 12 Mbit/s ? bit7: 18 Mbit/s ? bit8: 24 Mbit/s ? bit9: 36 Mbit/s ? bit10: 48 Mbit/s ? bit11: 54 Mbit/s.
1.3.6.1.4.1.2011.6.139.11.1.16.1.17Unsigned32read-writecurrent
hw2gRadioWmmMandatorySwitch
OBJECT-TYPE
This object indicates the status of the mandatory WMM matching function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.16.1.18INTEGER {disable(1), enable(2)}read-writecurrent
hw2gRadioApEDCAVoiceECWmax
OBJECT-TYPE
This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 3.
1.3.6.1.4.1.2011.6.139.11.1.16.1.19Unsigned32 (0..15)read-writecurrent
hw2gRadioApEDCAVoiceECWmin
OBJECT-TYPE
This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.16.1.20Unsigned32 (0..15)read-writecurrent
hw2gRadioApEDCAVoiceAIFSN
OBJECT-TYPE
This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for voice services on APs. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.16.1.21Unsigned32 (1..15)read-writecurrent
hw2gRadioApEDCAVoiceTXOPLimit
OBJECT-TYPE
This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for voice services on APs. The default value is 47. The unit is 32 us.
1.3.6.1.4.1.2011.6.139.11.1.16.1.22Unsigned32 (0..255)read-writecurrent
hw2gRadioApEDCAVoiceAckPolicy
OBJECT-TYPE
This object indicates the EDCA parameter AckPolicy for voice services on APs. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.16.1.23INTEGER {normal(1), noAck(2)}read-writecurrent
hw2gRadioApEDCAVideoECWmax
OBJECT-TYPE
This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.
1.3.6.1.4.1.2011.6.139.11.1.16.1.24Unsigned32 (0..15)read-writecurrent
hw2gRadioApEDCAVideoECWmin
OBJECT-TYPE
This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 3.
1.3.6.1.4.1.2011.6.139.11.1.16.1.25Unsigned32 (0..15)read-writecurrent
hw2gRadioApEDCAVideoAIFSN
OBJECT-TYPE
This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for video services on APs. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.16.1.26Unsigned32 (1..15)read-writecurrent
hw2gRadioApEDCAVideoTXOPLimit
OBJECT-TYPE
This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for video services on APs. The default value is 94. The unit is 32 us.
1.3.6.1.4.1.2011.6.139.11.1.16.1.27Unsigned32 (0..255)read-writecurrent
hw2gRadioApEDCAVideoAckPolicy
OBJECT-TYPE
This object indicates the EDCA parameter AckPolicy for video services on APs. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.16.1.28INTEGER {normal(1), noAck(2)}read-writecurrent
hw2gRadioApEDCABEECWmax
OBJECT-TYPE
This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 6.
1.3.6.1.4.1.2011.6.139.11.1.16.1.29Unsigned32 (0..15)read-writecurrent
hw2gRadioApEDCABEECWmin
OBJECT-TYPE
This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.
1.3.6.1.4.1.2011.6.139.11.1.16.1.30Unsigned32 (0..15)read-writecurrent
hw2gRadioApEDCABEAIFSN
OBJECT-TYPE
This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BE services on APs. The default value is 3.
1.3.6.1.4.1.2011.6.139.11.1.16.1.31Unsigned32 (1..15)read-writecurrent
hw2gRadioApEDCABETXOPLimit
OBJECT-TYPE
This object indicates the EDCA parameter TXOPLimit for BE services on APs. It indicates the transmission opportunity limit. The default value is 0. The unit is 32 us.
1.3.6.1.4.1.2011.6.139.11.1.16.1.32Unsigned32 (0..255)read-writecurrent
hw2gRadioApEDCABEAckPolicy
OBJECT-TYPE
This object indicates the EDCA parameter AckPolicy for BE services on APs. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.16.1.33INTEGER {normal(1), noAck(2)}read-writecurrent
hw2gRadioApEDCABKECWmax
OBJECT-TYPE
This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 10.
1.3.6.1.4.1.2011.6.139.11.1.16.1.34Unsigned32 (0..15)read-writecurrent
hw2gRadioApEDCABKECWmin
OBJECT-TYPE
This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.
1.3.6.1.4.1.2011.6.139.11.1.16.1.35Unsigned32 (0..15)read-writecurrent
hw2gRadioApEDCABKAIFSN
OBJECT-TYPE
This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BK services on APs. The default value is 7.
1.3.6.1.4.1.2011.6.139.11.1.16.1.36Unsigned32 (1..15)read-writecurrent
hw2gRadioApEDCABKTXOPLimit
OBJECT-TYPE
This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for BK services on APs. The default value is 0. The unit is 32 us.
1.3.6.1.4.1.2011.6.139.11.1.16.1.37Unsigned32 (0..255)read-writecurrent
hw2gRadioApEDCABKAckPolicy
OBJECT-TYPE
This object indicates the EDCA parameter AckPolicy for BK services on APs. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.16.1.38INTEGER {normal(1), noAck(2)}read-writecurrent
hw2gRadioWmmSwitch
OBJECT-TYPE
This object indicates the status of the WMM function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.16.1.39INTEGER {disable(1), enable(2)}read-writecurrent
hw2gRadioRtsCtsThreshold
OBJECT-TYPE
This object indicates the request To Send/Clear To Send (RTS/CTS) threshold. If the length of a frame to be sent by the MAC Layer exceeds this threshold, an RTS frame needs to be sent before this frame. The default value is 1400(from V2R8C10; The default value is 2347 before V2R8C10.). It is expressed in bytes.
1.3.6.1.4.1.2011.6.139.11.1.16.1.40Unsigned32 (64..2347)read-writecurrent
hw2gRadioRtsCtsMode
OBJECT-TYPE
This object indicates the RTS-CTS mode set for the specified radio profile. The default value is 3(from V2R8C10; The default value is 2 before V2R8C10.).
1.3.6.1.4.1.2011.6.139.11.1.16.1.41INTEGER {disable(1), ctsToSelf(2), rtsCts(3)}read-writecurrent
hw2gRadioPowerAutoAdjustSwitch
OBJECT-TYPE
This object indicates the status of the user-by-user power control function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.16.1.42INTEGER {disable(1), enable(2)}read-writecurrent
hw2gRadioBeamformingSwitch
OBJECT-TYPE
This object indicates the status of the beamforming function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.16.1.43INTEGER {disable(1), enable(2)}read-writecurrent
hw2gRadioWifiLight
OBJECT-TYPE
This object indicates information reflected by the blinking frequency of the Wireless LED on an AP.
1.3.6.1.4.1.2011.6.139.11.1.16.1.44INTEGER {signalStrength(1), traffic(2)}read-writecurrent
hw2gRadioChannelSwitchAnnouncementSwitch
OBJECT-TYPE
This object indicates the status of the channel switchover announcement function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.16.1.45INTEGER {disable(1), enable(2)}read-writecurrent
hw2gRadioChannelSwitchMode
OBJECT-TYPE
This object indicates the channel switch announcement mode. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.16.1.46INTEGER {continueTransmitting(1), stopTransmitting(2)}read-writecurrent
hw2gRadioAutoOffServiceSwitch
OBJECT-TYPE
This object indicates the status of the scheduled radio disabling function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.16.1.47INTEGER {disable(1), enable(2)}read-writecurrent
hw2gRadioAutoOffServiceStartTime
OBJECT-TYPE
This object indicates the start time for disabling the radio. The value is in the format of hh:mm:ss NOTE ? hh specifies the hour. The value is an integer that ranges from 0 to 23.? mm specifies the minute. The value is an integer that ranges from 0 to 59.? ss specifies the second. The value is an integer that ranges from 0 to 59.
1.3.6.1.4.1.2011.6.139.11.1.16.1.48OCTET STRING (SIZE(1..11))read-writecurrent
hw2gRadioAutoOffServiceEndTime
OBJECT-TYPE
This object indicates the end time for disabling of the radio. The value is in the format of hh:mm:ss NOTE ? hh specifies the hour. The value is an integer that ranges from 0 to 23.? mm specifies the minute. The value is an integer that ranges from 0 to 59.? ss specifies the second. The value is an integer that ranges from 0 to 59.
1.3.6.1.4.1.2011.6.139.11.1.16.1.49OCTET STRING (SIZE(1..11))read-writecurrent
hw2gRadioInterferenceDetectSwitch
OBJECT-TYPE
This object indicates the status of the user-by-user power control function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.16.1.50INTEGER {disable(1), enable(2)}read-writecurrent
hw2gRadioInterferenceIntraFrequencyThreshold
OBJECT-TYPE
This object indicates the alarm threshold for co-channel interference, namely, the percentage of the co-channel interference power against the maximum power. The default value is 50.
1.3.6.1.4.1.2011.6.139.11.1.16.1.51Unsigned32 (1..100)read-writecurrent
hw2gRadioInterferenceAdjacentFrequencyThreshold
OBJECT-TYPE
This object indicates the alarm threshold for adjacent-channel interference, namely, the percentage of the adjacent-channel interference power against the maximum power. The default value is 50.
1.3.6.1.4.1.2011.6.139.11.1.16.1.52Unsigned32 (1..100)read-writecurrent
hw2gRadioInterferenceStationThreshold
OBJECT-TYPE
This object indicates the alarm threshold for station interference. When the number of the STAs detected exceeds the specified alarm threshold, the AP reports alarms to the AC.The default value is 32.
1.3.6.1.4.1.2011.6.139.11.1.16.1.53Unsigned32 (1..256)read-writecurrent
hw2gRadioRrmProfile
OBJECT-TYPE
This object indicates the bound RRM profile.
1.3.6.1.4.1.2011.6.139.11.1.16.1.54OCTET STRING (SIZE(1..35))read-writecurrent
hw2gRadioAirScanProfile
OBJECT-TYPE
This object indicates the bound air scan profile.
1.3.6.1.4.1.2011.6.139.11.1.16.1.55OCTET STRING (SIZE(1..35))read-writecurrent
hw2gRadioProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined? ROWSTATUS_ACTIVE: active? ROWSTATUS_NOTINSERVICE: notInService? ROWSTATUS_NOTREADY: notReady? ROWSTATUS_CREATEANDFLOW: createAndGo? ROWSTATUS_CREATEANDWAIT: createAndWait? ROWSTATUS_DESTROY: destroy.
1.3.6.1.4.1.2011.6.139.11.1.16.1.56RowStatusread-writecurrent
hw2gRadioProfileUtmostPowerSwitch
OBJECT-TYPE
This object indicates the switch for the function of sending packets at maximum power, the default value is 2(auto).
1.3.6.1.4.1.2011.6.139.11.1.16.1.57INTEGER {disable(1), auto(2), enable(3)}read-writecurrent
hw2gRadioProfileRadioType
OBJECT-TYPE
This object indicates the type of radio. The default value is 17.
1.3.6.1.4.1.2011.6.139.11.1.16.1.59INTEGER {dot11b(1), dot11g(5), dot11n(9), dot11ax(17)}read-writecurrent
hw2gRadioProfileSmartAntennaEnable
OBJECT-TYPE
This object indicates the status of the smart antenna switch. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.16.1.60INTEGER {default(1), enable(2), disable(3)}read-writecurrent
hw2gRadioProfileTxChainNum
OBJECT-TYPE
This object indicates the number of the TX chain. The default value is 4.
1.3.6.1.4.1.2011.6.139.11.1.16.1.61Unsigned32 (1..4)read-writecurrent
hw2gRadioProfileRxChainNum
OBJECT-TYPE
This object indicates the number of the RX chain. The default value is 4.
1.3.6.1.4.1.2011.6.139.11.1.16.1.62Unsigned32 (1..4)read-writecurrent
hw2gRadioProfileAutoOffTimeRange
OBJECT-TYPE
This object indicates the time range for disabling the radio.
1.3.6.1.4.1.2011.6.139.11.1.16.1.63OCTET STRING (SIZE(0..32))read-writecurrent
hw2gRadioAgileAntennaPolarSwitch
OBJECT-TYPE
This object indicates the status of the agile antenna polarization. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.16.1.64INTEGER {disable(1), enable(2)}read-writecurrent
hw2gRadioProfileCCAThreshold
OBJECT-TYPE
This object indicates the value of the CCA threshold. The default value is 0.
1.3.6.1.4.1.2011.6.139.11.1.16.1.65Integer32 (-85..-40 | 0)read-writecurrent
hw2gRadioProfileSmartAntennaLowPerThreshold
OBJECT-TYPE
This object indicates the value of the smart antenna low per threshold. The default value is 20.
1.3.6.1.4.1.2011.6.139.11.1.16.1.66Unsigned32 (10 | 20 | 30)read-writecurrent
hw2gRadioProfileSmartAntennaHighPerThreshold
OBJECT-TYPE
This object indicates the value of the smart antenna high per threshold. The default value is 80.
1.3.6.1.4.1.2011.6.139.11.1.16.1.67Unsigned32 (50 | 60 | 70 | 80 | 90)read-writecurrent
hw2gRadioProfileSmartAntennaTrainingInterval
OBJECT-TYPE
This object indicates the value of the smart antenna training interval. The default value is 0.
1.3.6.1.4.1.2011.6.139.11.1.16.1.68Unsigned32 (10..600 | 0)read-writecurrent
hw2gRadioProfileSmartAntennaTrainingMPDUNum
OBJECT-TYPE
This object indicates the value of the smart antenna training MPDU number. The default value is 640.
1.3.6.1.4.1.2011.6.139.11.1.16.1.69Unsigned32 (10..1000)read-writecurrent
hw2gRadioProfileSmartAntThruputTrainThreshold
OBJECT-TYPE
This object indicates the value of the smart antenna throughput trigger training threshold. The default value is 10.
1.3.6.1.4.1.2011.6.139.11.1.16.1.70Unsigned32 (10 | 20 | 30 | 40 | 50)read-writecurrent
hw2gRadioDot11axGuardIntervalMode
OBJECT-TYPE
This object indicates the dot11ax GI mode. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.16.1.71INTEGER {gi0dot8(1), gi1dot6(2), gi3dot2(3)}read-writecurrent
hw2gRadioHighwayBssid
OBJECT-TYPE
This object indicates the highway bssid.
1.3.6.1.4.1.2011.6.139.11.1.16.1.72MacAddressread-writecurrent
hw2gRadioAutonavigationBeaconInterval
OBJECT-TYPE
This object indicates a autonavigation beacon interval. The default value is 60. It is expressed in ms.
1.3.6.1.4.1.2011.6.139.11.1.16.1.73Unsigned32 (60..100)read-writecurrent
hwRadio2GProfileAmsduSwitch
OBJECT-TYPE
This object indicates the status of a-msdu switch. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.16.1.74INTEGER {disable(1), enable(2)}read-writecurrent
hw2gRadioVipUserBandwidthReservationRatio
OBJECT-TYPE
This object indicates the proportion of reserved bandwidth for VIP users. The default value is 20.
1.3.6.1.4.1.2011.6.139.11.1.16.1.75Unsigned32 (0..100)read-writecurrent
hw2GRadioRu26ToleranceSwitch
OBJECT-TYPE
This object indicates the status of ru26-tolerance switch. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.16.1.76INTEGER {disable(1), enable(2)}read-writecurrent
hw5gRadioProfileTable
OBJECT-TYPE
This table is used to configure 5 GHz radio parameters, including physical radio parameters such as channel, power, antenna gain, and working mode, and bind air scan profiles and RRM profiles.
1.3.6.1.4.1.2011.6.139.11.1.17not-accessiblecurrent
hw5gRadioProfileEntry
OBJECT-TYPE
The index of this table is hw5gRadioProfileName.
1.3.6.1.4.1.2011.6.139.11.1.17.1not-accessiblecurrent
hw5gRadioProfileName
OBJECT-TYPE
This object indicates the name of a 5G radio profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.17.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hw5gRadioBeaconInterval
OBJECT-TYPE
This object indicates a Beacon interval. The default value is 100. It is expressed in ms.
1.3.6.1.4.1.2011.6.139.11.1.17.1.6Unsigned32 (60..1000)read-writecurrent
hw5gRadioGuardIntervalMode
OBJECT-TYPE
This object indicates the GI mode. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.17.1.10INTEGER {short(1), normal(2)}read-writecurrent
hw5gRadioShortPreamble
OBJECT-TYPE
This object indicates whether the short preamble is enabled. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.17.1.11INTEGER {disable(1), enable(2)}read-writecurrent
hw5gRadioFragmentationThreshold
OBJECT-TYPE
This object indicates the packet fragmentation threshold. The default value is 2346. It is expressed in bytes.
1.3.6.1.4.1.2011.6.139.11.1.17.1.12Unsigned32 (256..2346)read-writecurrent
hw5gRadioHtAmpduSwitch
OBJECT-TYPE
This object indicates the status of the aggregation function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.17.1.13INTEGER {disable(1), enable(2)}read-writecurrent
hw5gRadioHtAmpduMaxLengthExponent
OBJECT-TYPE
This object indicates the maximum length of frames converged by an MPDU. The default value is 3 ? 0: 8191 bytes? 1: 16383 bytes? 2: 32767 bytes ? 3: 65535 bytes.
1.3.6.1.4.1.2011.6.139.11.1.17.1.14Unsigned32 (0..3)read-writecurrent
hw5gRadioVhtAmpduMaxLengthExponent
OBJECT-TYPE
This object indicates the maximum length of frames converged by an MPDU. The default value is 7 ? 0: 8191 bytes? 1: 16383 bytes? 2: 32767 bytes? 3: 65535 bytes? 4: 131071 bytes? 5: 262143 bytes? 6: 524287 bytes? 7: 1048575 bytes.
1.3.6.1.4.1.2011.6.139.11.1.17.1.15Integer32 (0..7)read-writecurrent
hw5gRadioVhtAmsduSwitch
OBJECT-TYPE
This object indicates the status of the A-MSDU aggregation function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.17.1.16INTEGER {disable(1), enable(2)}read-writecurrent
hw5gRadioVhtAmsduMaxFrameNum
OBJECT-TYPE
This object indicates the maximum number of sub-frames that can be aggregated into an A-MSDU. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.17.1.17Unsigned32 (2..15)read-writecurrent
hw5gRadioDot11aBasicRate
OBJECT-TYPE
This object indicates the basic rate set of the 802.11bg protocol. The default value is 0x148 (6 Mbit/s/12 Mbit/s/24 Mbit/s) ? bit0: 1 Mbit/s? bit1: 2 Mbit/s? bit2: 5.5 Mbit/s? bit3: 6 Mbit/s? bit4: 9 Mbit/s? bit5: 11 Mbit/s? bit6: 12 Mbit/s? bit7: 18 Mbit/s? bit8: 24 Mbit/s? bit9: 36 Mbit/s? bit10: 48 Mbit/s? bit11: 54 Mbit/s.
1.3.6.1.4.1.2011.6.139.11.1.17.1.18Unsigned32 (1..4095)read-writecurrent
hw5gRadioDot11aSupportRate
OBJECT-TYPE
This object indicates the supported rate set of the 802.11bg protocol. The default value is 0xFD8 (6 Mbit/s/9 Mbit/s/12 Mbit/s/18 Mbit/s/24 Mbit/s/36 Mbit/s/48 Mbit/s/54 Mbit/s).? bit0: 1 Mbit/s? bit1: 2 Mbit/s? bit2: 5.5 Mbit/s? bit3: 6 Mbit/s? bit4: 9 Mbit/s? bit5: 11 Mbit/s? bit6: 12 Mbit/s? bit7: 18 Mbit/s? bit8: 24 Mbit/s? bit9: 36 Mbit/s? bit10: 48 Mbit/s? bit11: 54 Mbit/s.
1.3.6.1.4.1.2011.6.139.11.1.17.1.19Unsigned32 (1..4095)read-writecurrent
hw5gRadioMulticastRate
OBJECT-TYPE
This object indicates the multicast rate. The default value is 0x8(6M).? bit0: 1 Mbit/s? bit1: 2 Mbit/s? bit2: 5.5 Mbit/s? bit3: 6 Mbit/s? bit4: 9 Mbit/s? bit5: 11 Mbit/s? bit6: 12 Mbit/s? bit7: 18 Mbit/s? bit8: 24 Mbit/s? bit9: 36 Mbit/s? bit10: 48 Mbit/s? bit11: 54 Mbit/s.
1.3.6.1.4.1.2011.6.139.11.1.17.1.20Unsigned32read-writecurrent
hw5gRadioVhtNssMapMaxMcs
OBJECT-TYPE
This object indicates the maximum MCS value for 802.11ac radios. The number of spatial flows is 8 and the maximum MCS value is 7-9. The format is x?x?x?x?x?x?x?x. The default value is 9?9?9?9?9?9?9?9.
1.3.6.1.4.1.2011.6.139.11.1.17.1.21OCTET STRING (SIZE(0..255))read-writecurrent
hw5gRadioWmmMandatorySwitch
OBJECT-TYPE
This object indicates the status of the mandatory WMM matching function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.17.1.22INTEGER {disable(1), enable(2)}read-writecurrent
hw5gRadioApEDCAVoiceECWmax
OBJECT-TYPE
This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 3.
1.3.6.1.4.1.2011.6.139.11.1.17.1.23Unsigned32 (0..15)read-writecurrent
hw5gRadioApEDCAVoiceECWmin
OBJECT-TYPE
This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.17.1.24Unsigned32 (0..15)read-writecurrent
hw5gRadioApEDCAVoiceAIFSN
OBJECT-TYPE
This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for voice services on APs. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.17.1.25Unsigned32 (1..15)read-writecurrent
hw5gRadioApEDCAVoiceTXOPLimit
OBJECT-TYPE
This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for voice services on APs. The default value is 47. The unit is 32 us.
1.3.6.1.4.1.2011.6.139.11.1.17.1.26Unsigned32 (0..255)read-writecurrent
hw5gRadioApEDCAVoiceAckPolicy
OBJECT-TYPE
This object indicates the EDCA parameter AckPolicy for voice services on APs. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.17.1.27INTEGER {normal(1), noAck(2)}read-writecurrent
hw5gRadioApEDCAVideoECWmax
OBJECT-TYPE
This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.
1.3.6.1.4.1.2011.6.139.11.1.17.1.28Unsigned32 (0..15)read-writecurrent
hw5gRadioApEDCAVideoECWmin
OBJECT-TYPE
This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 3.
1.3.6.1.4.1.2011.6.139.11.1.17.1.29Unsigned32 (0..15)read-writecurrent
hw5gRadioApEDCAVideoAIFSN
OBJECT-TYPE
This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for video services on APs. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.17.1.30Unsigned32 (1..15)read-writecurrent
hw5gRadioApEDCAVideoTXOPLimit
OBJECT-TYPE
This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for video services on APs. The default value is 94. The unit is 32 us.
1.3.6.1.4.1.2011.6.139.11.1.17.1.31Unsigned32 (0..255)read-writecurrent
hw5gRadioApEDCAVideoAckPolicy
OBJECT-TYPE
This object indicates the EDCA parameter AckPolicy for video services on APs. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.17.1.32INTEGER {normal(1), noAck(2)}read-writecurrent
hw5gRadioApEDCABEECWmax
OBJECT-TYPE
This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 6.
1.3.6.1.4.1.2011.6.139.11.1.17.1.33Unsigned32 (0..15)read-writecurrent
hw5gRadioApEDCABEECWmin
OBJECT-TYPE
This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.
1.3.6.1.4.1.2011.6.139.11.1.17.1.34Unsigned32 (0..15)read-writecurrent
hw5gRadioApEDCABEAIFSN
OBJECT-TYPE
This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BE services on APs. The default value is 3.
1.3.6.1.4.1.2011.6.139.11.1.17.1.35Unsigned32 (1..15)read-writecurrent
hw5gRadioApEDCABETXOPLimit
OBJECT-TYPE
This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for BE services on APs. The default value is 0. The unit is 32 us.
1.3.6.1.4.1.2011.6.139.11.1.17.1.36Unsigned32 (0..255)read-writecurrent
hw5gRadioApEDCABEAckPolicy
OBJECT-TYPE
This object indicates the EDCA parameter AckPolicy for BE services on APs. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.17.1.37INTEGER {normal(1), noAck(2)}read-writecurrent
hw5gRadioApEDCABKECWmax
OBJECT-TYPE
This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 10.
1.3.6.1.4.1.2011.6.139.11.1.17.1.38Unsigned32 (0..15)read-writecurrent
hw5gRadioApEDCABKECWmin
OBJECT-TYPE
This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.
1.3.6.1.4.1.2011.6.139.11.1.17.1.39Unsigned32 (0..15)read-writecurrent
hw5gRadioApEDCABKAIFSN
OBJECT-TYPE
This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BK services on APs. The default value is 7..
1.3.6.1.4.1.2011.6.139.11.1.17.1.40Unsigned32 (1..15)read-writecurrent
hw5gRadioApEDCABKTXOPLimit
OBJECT-TYPE
This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for BK services on APs. The default value is 0. The unit is 32 us.
1.3.6.1.4.1.2011.6.139.11.1.17.1.41Unsigned32 (0..255)read-writecurrent
hw5gRadioApEDCABKAckPolicy
OBJECT-TYPE
This object indicates the EDCA parameter AckPolicy for BK services on APs. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.17.1.42INTEGER {normal(1), noAck(2)}read-writecurrent
hw5gRadioWmmSwitch
OBJECT-TYPE
This object indicates the status of the WMM function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.17.1.43INTEGER {disable(1), enable(2)}read-writecurrent
hw5gRadioRtsCtsThreshold
OBJECT-TYPE
This object indicates the request To Send/Clear To Send (RTS/CTS) threshold. If the length of a frame to be sent by the MAC Layer exceeds this threshold, an RTS frame needs to be sent before this frame. The default value is 1400 bytes(from V2R8C10; The default value is 2347 before V2R8C10.).
1.3.6.1.4.1.2011.6.139.11.1.17.1.44Unsigned32 (64..2347)read-writecurrent
hw5gRadioRtsCtsMode
OBJECT-TYPE
This object indicates the RTS-CTS mode set for the specified radio profile. The default value is 3(from V2R8C10; The default value is 2 before V2R8C10.). In V200R019C10 and later versions, 2 is not supported and will switch to 3 automatically.
1.3.6.1.4.1.2011.6.139.11.1.17.1.45INTEGER {disable(1), ctsToSelf(2), rtsCts(3)}read-writecurrent
hw5gRadioPowerAutoAdjustSwitch
OBJECT-TYPE
This object indicates the status of the user-by-user power control function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.17.1.46INTEGER {disable(1), enable(2)}read-writecurrent
hw5gRadioBeamformingSwitch
OBJECT-TYPE
This object indicates the status of the beamforming function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.17.1.47INTEGER {disable(1), enable(2)}read-writecurrent
hw5gRadioWifiLight
OBJECT-TYPE
This object indicates information reflected by the blinking frequency of the Wireless LED on an AP. The default value is 1 NOTE ? If Mesh is enabled on an AP, the Wireless indicator blinking frequency reflects the signal strength of the AP with the weakest signal among received signals from all neighboring APs.? If WDS is enabled on an AP, the the Wireless indicator blinking frequency reflects the signal strength of the connected WDS AP.? For a Leaf AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Middle AP.? For a Middle AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Root AP.? For a root AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Middle AP with the weakest signal.? If WDS or Mesh is not enabled on an AP, the Wireless indicator blinking frequency reflects the service traffic volume on the radio.
1.3.6.1.4.1.2011.6.139.11.1.17.1.48INTEGER {signalStrength(1), traffic(2)}read-writecurrent
hw5gRadioChannelSwitchAnnouncementSwitch
OBJECT-TYPE
This object indicates the status of the channel switchover announcement function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.17.1.49INTEGER {disable(1), enable(2)}read-writecurrent
hw5gRadioChannelSwitchMode
OBJECT-TYPE
This object indicates the channel switch announcement mode. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.17.1.50INTEGER {continueTransmitting(1), stopTransmitting(2)}read-writecurrent
hw5gRadioAutoOffServiceSwitch
OBJECT-TYPE
This object indicates the status of the scheduled radio disabling function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.17.1.51INTEGER {disable(1), enable(2)}read-writecurrent
hw5gRadioAutoOffServiceStartTime
OBJECT-TYPE
This object indicates the start time for disabling the radio. The value is in the format of hh:mm:ss NOTE ? hh specifies the hour. The value is an integer that ranges from 0 to 23.? mm specifies the minute. The value is an integer that ranges from 0 to 59.? ss specifies the second. The value is an integer that ranges from 0 to 59..
1.3.6.1.4.1.2011.6.139.11.1.17.1.52OCTET STRING (SIZE(1..11))read-writecurrent
hw5gRadioAutoOffServiceEndTime
OBJECT-TYPE
This object indicates the end time for disabling of the radio. The value is in the format of hh:mm:ss. NOTE? hh specifies the hour. The value is an integer that ranges from 0 to 23.? mm specifies the minute. The value is an integer that ranges from 0 to 59.? ss specifies the second. The value is an integer that ranges from 0 to 59.
1.3.6.1.4.1.2011.6.139.11.1.17.1.53OCTET STRING (SIZE(1..11))read-writecurrent
hw5gRadioInterferenceDetectSwitch
OBJECT-TYPE
This object indicates the status of the user-by-user power control function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.17.1.54INTEGER {disable(1), enable(2)}read-writecurrent
hw5gRadioInterferenceIntraFrequencyThreshold
OBJECT-TYPE
This object indicates the alarm threshold for co-channel interference, namely, the percentage of the co-channel interference power against the maximum power. The default value is 50.
1.3.6.1.4.1.2011.6.139.11.1.17.1.55Unsigned32 (1..100)read-writecurrent
hw5gRadioInterferenceAdjacentFrequencyThreshold
OBJECT-TYPE
This object indicates the alarm threshold for adjacent-channel interference, namely, the percentage of the adjacent-channel interference power against the maximum power. The default value is 50.
1.3.6.1.4.1.2011.6.139.11.1.17.1.56Unsigned32 (1..100)read-writecurrent
hw5gRadioInterferenceStationThreshold
OBJECT-TYPE
This object indicates the alarm threshold for adjacent-channel interference. When the number of the STAs detected exceeds the specified alarm threshold, the AP reports alarms to the AC. The default value is 32.
1.3.6.1.4.1.2011.6.139.11.1.17.1.57Unsigned32 (1..256)read-writecurrent
hw5gRadioRrmProfile
OBJECT-TYPE
This object indicates the bound RRM profile.
1.3.6.1.4.1.2011.6.139.11.1.17.1.58OCTET STRING (SIZE(1..35))read-writecurrent
hw5gRadioAirScanProfile
OBJECT-TYPE
This object indicates the bound air scan profile.
1.3.6.1.4.1.2011.6.139.11.1.17.1.59OCTET STRING (SIZE(1..35))read-writecurrent
hw5gRadioProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.? ROWSTATUS_UNDEFINED: undefined? ROWSTATUS_ACTIVE: active? ROWSTATUS_NOTINSERVICE: notInService? ROWSTATUS_NOTREADY: notReady? ROWSTATUS_CREATEANDFLOW: createAndGo? ROWSTATUS_CREATEANDWAIT: createAndWait? ROWSTATUS_DESTROY: destroy.
1.3.6.1.4.1.2011.6.139.11.1.17.1.60RowStatusread-writecurrent
hw5gRadioProfileUtmostPowerSwitch
OBJECT-TYPE
This object indicates the switch for the function of sending packets at maximum power, the default value is 2(auto).
1.3.6.1.4.1.2011.6.139.11.1.17.1.61INTEGER {disable(1), auto(2), enable(3)}read-writecurrent
hw5gRadioProfileRadioType
OBJECT-TYPE
This object indicates the type of radio. The default value is 16.
1.3.6.1.4.1.2011.6.139.11.1.17.1.63INTEGER {dot11a(2), dot11n(6), dot11ac(14), dot11ax(16)}read-writecurrent
hw5gRadioProfileSmartAntennaEnable
OBJECT-TYPE
This object indicates the status of the smart antenna switch. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.17.1.64INTEGER {default(1), enable(2), disable(3)}read-writecurrent
hw5gRadioProfileMuMIMOEnable
OBJECT-TYPE
This object indicates the status of the MU MIMO switch. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.17.1.65INTEGER {disable(1), enable(2)}read-writecurrent
hw5gRadioProfileTxChainNum
OBJECT-TYPE
This object indicates the number of the TX chain. The default value is 4.
1.3.6.1.4.1.2011.6.139.11.1.17.1.66Unsigned32 (1..4)read-writecurrent
hw5gRadioProfileRxChainNum
OBJECT-TYPE
This object indicates the number of the RX chain. The default value is 4.
1.3.6.1.4.1.2011.6.139.11.1.17.1.67Unsigned32 (1..4)read-writecurrent
hw5gRadioProfileAutoOffTimeRange
OBJECT-TYPE
This object indicates the time range for disabling the radio.
1.3.6.1.4.1.2011.6.139.11.1.17.1.68OCTET STRING (SIZE(0..32))read-writecurrent
hw5gRadioAgileAntennaPolarSwitch
OBJECT-TYPE
This object indicates the status of the agile antenna polarization. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.17.1.69INTEGER {disable(1), enable(2)}read-writecurrent
hw5gRadioProfileCCAThreshold
OBJECT-TYPE
This object indicates the value of the CCA threshold. The default value is 0.
1.3.6.1.4.1.2011.6.139.11.1.17.1.70Integer32 (-85..-40 | 0)read-writecurrent
hw5gRadioProfileSmartAntennaLowPerThreshold
OBJECT-TYPE
This object indicates the value of the smart antenna low per threshold. The default value is 20.
1.3.6.1.4.1.2011.6.139.11.1.17.1.71Unsigned32 (10 | 20 | 30)read-writecurrent
hw5gRadioProfileSmartAntennaHighPerThreshold
OBJECT-TYPE
This object indicates the value of the smart antenna high per threshold. The default value is 80.
1.3.6.1.4.1.2011.6.139.11.1.17.1.72Unsigned32 (50 | 60 | 70 | 80 | 90)read-writecurrent
hw5gRadioProfileSmartAntennaTrainingInterval
OBJECT-TYPE
This object indicates the value of the smart antenna training interval. The default value is 0.
1.3.6.1.4.1.2011.6.139.11.1.17.1.73Unsigned32 (10..600 | 0)read-writecurrent
hw5gRadioProfileSmartAntennaTrainingMPDUNum
OBJECT-TYPE
This object indicates the value of the smart antenna training MPDU number. The default value is 640.
1.3.6.1.4.1.2011.6.139.11.1.17.1.74Unsigned32 (10..1000)read-writecurrent
hw5gRadioProfileSmartAntThruputTrainThreshold
OBJECT-TYPE
This object indicates the value of the smart antenna throughput trigger training threshold. The default value is 10.
1.3.6.1.4.1.2011.6.139.11.1.17.1.75Unsigned32 (10 | 20 | 30 | 40 | 50)read-writecurrent
hw5gRadioDot11axGuardIntervalMode
OBJECT-TYPE
This object indicates the dot11ax GI mode. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.17.1.76INTEGER {gi0dot8(1), gi1dot6(2), gi3dot2(3)}read-writecurrent
hw5gRadioHighwayBssid
OBJECT-TYPE
This object indicates the highway bssid.
1.3.6.1.4.1.2011.6.139.11.1.17.1.77MacAddressread-writecurrent
hw5gRadioAutonavigationBeaconInterval
OBJECT-TYPE
This object indicates a autonavigation beacon interval. The default value is 60. It is expressed in ms.
1.3.6.1.4.1.2011.6.139.11.1.17.1.78Unsigned32 (60..100)read-writecurrent
hw5gRadioVipUserBandwidthReservationRatio
OBJECT-TYPE
This object indicates the proportion of reserved bandwidth for VIP users. The default value is 20.
1.3.6.1.4.1.2011.6.139.11.1.17.1.79Unsigned32 (0..100)read-writecurrent
hw5GRadioRu26ToleranceSwitch
OBJECT-TYPE
This object indicates the status of ru26-tolerance switch. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.17.1.80INTEGER {disable(1), enable(2)}read-writecurrent
hwRrmProfileTable
OBJECT-TYPE
This table is used to configure radio resource management parameters, including parameters related to band steering, dynamic load balancing, smart roaming, and UAC.
1.3.6.1.4.1.2011.6.139.11.1.18not-accessiblecurrent
hwRrmProfileEntry
OBJECT-TYPE
The index of this table is hwRrmProfileName.
1.3.6.1.4.1.2011.6.139.11.1.18.1not-accessiblecurrent
hwRrmProfileName
OBJECT-TYPE
This object indicates the name of the RRM profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.18.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwRrmAutoChannelSelectSwitch
OBJECT-TYPE
This object indicates the status of the automatic channel selection function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.18.1.2INTEGER {disable(1), enable(2)}read-writecurrent
hwRrmAutoTxPowerSelectSwitch
OBJECT-TYPE
This object indicates the status of the automatic power selection function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.18.1.3INTEGER {disable(1), enable(2)}read-writecurrent
hwRrmErrRateThreshold
OBJECT-TYPE
This object indicate the error packet threshold triggering the automatic channel or power selection function. The default value is 60. It is expressed in percentage.
1.3.6.1.4.1.2011.6.139.11.1.18.1.4Unsigned32 (20..100)read-writecurrent
hwRrmAirtimeFairSchduleSwitch
OBJECT-TYPE
This object indicates the status of the airtime scheduling function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.18.1.5INTEGER {disable(1), enable(2)}read-writecurrent
hwRrmDynamicEdcaSwitch
OBJECT-TYPE
This object indicates the status of the dynamic EDCA parameter adjustment function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.18.1.6INTEGER {disable(1), enable(2)}read-writecurrent
hwRrmUacLimitClientSnrSwitch
OBJECT-TYPE
This object indicates the status of the rejecting access from terminals with weak signals function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.18.1.7INTEGER {disable(1), enable(2)}read-writecurrent
hwRrmUacClientSnrThreshold
OBJECT-TYPE
This object indicates the SNR threshold for rejecting access from terminals. The default value is 15(from V2R8C10; The default value is 20 before V2R8C10.). The value ranges from 5 to 25 from V200R010C00 and 5 to 75 before V200R010C00. It is expressed in dB.
1.3.6.1.4.1.2011.6.139.11.1.18.1.8Unsigned32 (5..45 | 255)read-writecurrent
hwRrmUacPolicySwitch
OBJECT-TYPE
This object indicates the status of the UAC policy function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.18.1.9INTEGER {disable(1), enable(2)}read-writecurrent
hwRrmUacPolicyType
OBJECT-TYPE
This object indicates the UAC policy. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.18.1.10INTEGER {users(1), channelUtilization(2), unknown(255)}read-writecurrent
hwRrmUacClientNumAccessThreshold
OBJECT-TYPE
This object indicates the user CAC access threshold based on the number of users. If the number of online users reaches the threshold after a new user goes online, the AP will reject access requests of other new users. The default value is 64.
1.3.6.1.4.1.2011.6.139.11.1.18.1.11Unsigned32 (1..512)read-writecurrent
hwRrmUacClientNumRoamThreshold
OBJECT-TYPE
This object indicates the user CAC roaming threshold based on the number of users. When a user roams to an AP, the AP checks whether the current number of online users reaches the roaming threshold. If so, the AP denies access of the user.The default value is 64.
1.3.6.1.4.1.2011.6.139.11.1.18.1.12Unsigned32 (1..512)read-writecurrent
hwRrmUacReachThresholdHideSsidSwitch
OBJECT-TYPE
This object indicates the disposal method when the value of UAC reaches the specified threshold. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.18.1.13INTEGER {advertiseSSID(1), hideSSID(2), replaceBasedOnPriority(3)}read-writecurrent
hwRrmBandSteerDenyThreshold
OBJECT-TYPE
This object indicates the maximum number of times the band steering function rejects association requests from terminals. The default value is 0.
1.3.6.1.4.1.2011.6.139.11.1.18.1.14Unsigned32 (0..10)read-writecurrent
hwRrmBandSteerLbClientThreshold
OBJECT-TYPE
This object indicates the minimum number of terminals for triggering inter-band load balancing. The default value is 100.
1.3.6.1.4.1.2011.6.139.11.1.18.1.15Unsigned32 (0..100)read-writecurrent
hwRrmBandSteerLbGapThreshold
OBJECT-TYPE
This object indicates the percentage threshold for access STAs on the 5 GHz radio. The default value is 90.
1.3.6.1.4.1.2011.6.139.11.1.18.1.16Unsigned32 (1..100)read-writecurrent
hwRrmBandSteerClientBandsExpire
OBJECT-TYPE
This object indicates the expiration condition for records of terminal supported bands. If the AP continuously receives probe messages from a terminal on the same band and the number of received probe messages exceeds the specified threshold, the records of terminal supported bands will be updated and the AP will consider that the terminal supports only this band. The default value is 35.
1.3.6.1.4.1.2011.6.139.11.1.18.1.17Unsigned32 (10..65535)read-writecurrent
hwRrmLoadBalanceSwitch
OBJECT-TYPE
This object indicates the status of the load balancing group function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.18.1.18INTEGER {disable(1), enable(2)}read-writecurrent
hwRrmLoadBalanceClientThreshold
OBJECT-TYPE
This object indicates the percentage of terminals for triggering load balancing. The default value is 10. It is expressed in percentage.
1.3.6.1.4.1.2011.6.139.11.1.18.1.19Unsigned32 (1..100)read-writecurrent
hwRrmLoadBalanceGapThreshold
OBJECT-TYPE
This object indicates the load difference threshold for triggering load balancing, which is expressed in the number of terminals. The default value is 10.
1.3.6.1.4.1.2011.6.139.11.1.18.1.20Unsigned32 (1..100)read-writecurrent
hwRrmLoadBalanceDenyThreshold
OBJECT-TYPE
This object indicates the maximum number of times the load balancing function rejects association requests from terminals. The default value is 3.
1.3.6.1.4.1.2011.6.139.11.1.18.1.21Unsigned32 (1..10)read-writecurrent
hwRrmSmartRoamCheckType
OBJECT-TYPE
This object indicates whether STA active roaming is triggered by rate check or SNR check.The values are as follows:? 1: checkSnr? 2: checkRate? 3: checkAll.
1.3.6.1.4.1.2011.6.139.11.1.18.1.22INTEGER {checkSnr(1), checkRate(2), checkAll(3)}read-writecurrent
hwRrmSmartRoamSwitch
OBJECT-TYPE
This object indicates the status of the smart roaming function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.18.1.23INTEGER {disable(1), enable(2)}read-writecurrent
hwRrmSmartRoamSnrThreshold
OBJECT-TYPE
This object indicates the SNR threshold for triggering the smart roaming function. The default value is 20 dB.
1.3.6.1.4.1.2011.6.139.11.1.18.1.24Unsigned32 (15..45)read-writecurrent
hwRrmSmartRoamRateThreshold
OBJECT-TYPE
This object indicates the rate threshold for triggering the smart roaming function. It is expressed in the percentage against the maximum rate supported by the terminal. The default value is 0. It is expressed in percentage.
1.3.6.1.4.1.2011.6.139.11.1.18.1.25Unsigned32 (1..100)read-writecurrent
hwRrmSmartRoamSnrHighLevelMargin
OBJECT-TYPE
This object indicates the upper SNR difference threshold for triggering smart roaming. The default value is 15. It is expressed in dB.
1.3.6.1.4.1.2011.6.139.11.1.18.1.26Unsigned32 (10..20)read-writecurrent
hwRrmSmartRoamSnrLowLevelMargin
OBJECT-TYPE
This object indicates the lower SNR difference threshold for triggering smart roaming. The default value is 6. It is expressed in dB.
1.3.6.1.4.1.2011.6.139.11.1.18.1.27Unsigned32 (3..15)read-writecurrent
hwRrmSmartRoamSnrCheckInterval
OBJECT-TYPE
This object indicates the terminal SNR detection interval for smart roaming. The default value is 3. It is expressed in s.
1.3.6.1.4.1.2011.6.139.11.1.18.1.28Unsigned32 (3..30)read-writecurrent
hwRrmSmartRoamUnableRoamExpireTime
OBJECT-TYPE
This object indicates the aging time of records that terminals are unable to roam. The default value is 120. It is expressed in minutes.
1.3.6.1.4.1.2011.6.139.11.1.18.1.29Unsigned32 (30..2880)read-writecurrent
hwRrmProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.18.1.30RowStatusread-writecurrent
hwRrmUacChannelUtiAccessThreshold
OBJECT-TYPE
This object indicates the user CAC access threshold based on the channel utilization. If the channel utilization reaches the threshold after a new user goes online, the AP will reject access requests of other new users.The default value is 80, in percentage.
1.3.6.1.4.1.2011.6.139.11.1.18.1.31Unsigned32 (1..100)read-writecurrent
hwRrmUacChannelUtiRoamThreshold
OBJECT-TYPE
This object indicates the user CAC roaming threshold based on the channel utilization. When a user roams to an AP, the AP checks whether the current channel utilization reaches the roaming threshold. If so, the AP denies access of the user.The default value is 80, in percentage.
1.3.6.1.4.1.2011.6.139.11.1.18.1.32Unsigned32 (1..100)read-writecurrent
hwRrmSmartRoamQuickKickoffRateThr
OBJECT-TYPE
Smart roam quick-kickoff rate threshold
1.3.6.1.4.1.2011.6.139.11.1.18.1.33Unsigned32 (1..100)read-writecurrent
hwRrmSmartRoamQuickKickoffSnrThr
OBJECT-TYPE
Smart roam quick-kickoff SNR threshold
1.3.6.1.4.1.2011.6.139.11.1.18.1.34Unsigned32 (5..45)read-writecurrent
hwRrmBandSteerSNRThreshold
OBJECT-TYPE
This object indicates the start SNR threshold for triggering 5G-prior access. The default value is 20, in dB.
1.3.6.1.4.1.2011.6.139.11.1.18.1.35Integer32 (10..35)read-writecurrent
hwRrmLoadBalanceMode
OBJECT-TYPE
This object indicates the mode for load balancing in a static load balancing group.
1.3.6.1.4.1.2011.6.139.11.1.18.1.36INTEGER {staNumber(1), channelUtilization(2)}read-writecurrent
hwRrmLoadBalanceChUtilGapThreshold
OBJECT-TYPE
This object indicates the load difference threshold of a static load balancing group in channel-utilization mode.
1.3.6.1.4.1.2011.6.139.11.1.18.1.37Unsigned32 (1..99)read-writecurrent
hwRrmLoadBalanceChUtilStartThreshold
OBJECT-TYPE
This object indicates the start threshold for load balancing in a static load balancing group in channel-utilization mode.
1.3.6.1.4.1.2011.6.139.11.1.18.1.38Unsigned32 (1..99)read-writecurrent
hwRrmCalibrateCoverageThr
OBJECT-TYPE
Calibrate TPC coverage threshold.
1.3.6.1.4.1.2011.6.139.11.1.18.1.39Integer32 (-85..-35)read-writecurrent
hwRrmCalibrateMaxTxPwr
OBJECT-TYPE
Calibrate maximum TX power.
1.3.6.1.4.1.2011.6.139.11.1.18.1.40Unsigned32 (1..127)read-writecurrent
hwRrmCalibrateMinTxPwr
OBJECT-TYPE
Calibrate minimum TX power.
1.3.6.1.4.1.2011.6.139.11.1.18.1.41Unsigned32 (1..127)read-writecurrent
hwRrmCalibrateNoiseFloorThr
OBJECT-TYPE
Calibrate nose-floor threshold.
1.3.6.1.4.1.2011.6.139.11.1.18.1.42Integer32 (-95..0)read-writecurrent
hwRrmDFSSmartSelectionSwitch
OBJECT-TYPE
This object indicates whether DFS smart selection is enabled. By default, this function is enabled.
1.3.6.1.4.1.2011.6.139.11.1.18.1.43INTEGER {disable(1), enable(2)}read-writecurrent
hwRrmDFSRecoverDelayTime
OBJECT-TYPE
This object indicates the delay in switching back the DFS channel.
1.3.6.1.4.1.2011.6.139.11.1.18.1.44Integer32 (0..2880)read-writecurrent
hwRrmSmartRoamQuickKickoffSNRCheckInterval
OBJECT-TYPE
This object indicates the interval for checking the SNR to determine whether to quickly disconnect STAs. The default value is 500, in milliseconds.
1.3.6.1.4.1.2011.6.139.11.1.18.1.45Integer32 (300..3000)read-writecurrent
hwRrmSmartRoamQuickKickoffSNRPNObserveTime
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.18.1.46Integer32 (1..10)read-writecurrent
hwRrmSmartRoamQuickKickoffSNRPNQualifyTime
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.18.1.47Integer32 (1..10)read-writecurrent
hwRrmErrRateCheckInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.18.1.48Integer32 (1..10)read-writecurrent
hwRrmErrRateCheckTrafficThreshold
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.18.1.49Integer32 (1..20000)read-writecurrent
hwRrmLoadBalanceRssiThreshold
OBJECT-TYPE
This object indicates the load balance rssi threshold.
1.3.6.1.4.1.2011.6.139.11.1.18.1.50Integer32 (-75..-55)read-writecurrent
hwSfnRoamCheckHighThreshold
OBJECT-TYPE
This object indicates sfn roam check high-threshold .
1.3.6.1.4.1.2011.6.139.11.1.18.1.51Integer32 (-60..-45)read-writecurrent
hwSfnRoamCheckLowThreshold
OBJECT-TYPE
This object indicates sfn roam check low-threshold .
1.3.6.1.4.1.2011.6.139.11.1.18.1.52Integer32 (-70..-55)read-writecurrent
hwSfnRoamCheckRssiAccumulateThreshold
OBJECT-TYPE
This object indicates sfn roam check cumulative RSSI change threshold .
1.3.6.1.4.1.2011.6.139.11.1.18.1.53Integer32 (1..32)read-writecurrent
hwSfnRoamCheckStaHoldingTimes
OBJECT-TYPE
This object indicates sfn roam check Sta HoldingTimes .
1.3.6.1.4.1.2011.6.139.11.1.18.1.54Integer32 (1..32)read-writecurrent
hwSfnRoamCheckGapRssiThreshold
OBJECT-TYPE
This object indicates sfn roam check gap rssi Threshold.
1.3.6.1.4.1.2011.6.139.11.1.18.1.55Integer32 (1..32)read-writecurrent
hwSfnRoamCheckBetterSnrTimes
OBJECT-TYPE
This object indicates sfn roam check Better Snr Times.
1.3.6.1.4.1.2011.6.139.11.1.18.1.56Integer32 (1..32)read-writecurrent
hwSfnRoamCheckInterval
OBJECT-TYPE
This object indicates sfn roam check Decision Interval .
1.3.6.1.4.1.2011.6.139.11.1.18.1.57Integer32 (300..1500)read-writecurrent
hwSfnRoamReportInterval
OBJECT-TYPE
This object indicates sfn roam check Snr Report Interval
1.3.6.1.4.1.2011.6.139.11.1.18.1.58Integer32 (200..1000)read-writecurrent
hwRrmMultimediaAirOptimize
OBJECT-TYPE
This object indicates multimedia optimized edca.
1.3.6.1.4.1.2011.6.139.11.1.18.1.59INTEGER {disable(1), enable(2)}read-writecurrent
hwRrmHighDensityAmcOptimizeSwitch
OBJECT-TYPE
This object indicates high density AMC optimize switch.
1.3.6.1.4.1.2011.6.139.11.1.18.1.60INTEGER {disable(1), enable(2)}read-writecurrent
hwRrmMultimediaOptimizedThresholdVoice
OBJECT-TYPE
This object indicates multimedia optimized edca adaptive voice threshold.
1.3.6.1.4.1.2011.6.139.11.1.18.1.61Unsigned32 (10..1000)read-writecurrent
hwRrmMultimediaOptimizedThresholdVideo
OBJECT-TYPE
This object indicates multimedia optimized edca adaptive video threshold.
1.3.6.1.4.1.2011.6.139.11.1.18.1.62Unsigned32 (10..1000)read-writecurrent
hwRrmSmartRoamQuickKickoffSwitch
OBJECT-TYPE
This object the status of the smart roam quick-kickoff function. The default value is 2 except the Fat AP.
1.3.6.1.4.1.2011.6.139.11.1.18.1.63INTEGER {disable(1), enable(2)}read-writecurrent
hwRrmSmartRoamQuickKickoffCheckType
OBJECT-TYPE
This object indicates the check mode for determining whether to quickly disconnect STAs. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.18.1.64INTEGER {checkSnr(1), checkRate(2), checkAll(3)}read-writecurrent
hwRrmLoadBalanceGapStaNumThreshold
OBJECT-TYPE
This object indicates the load difference threshold for triggering dynamic load balancing based on the number of STAs. The value 0 indicates that load balancing is based on the percentage of STAs.
1.3.6.1.4.1.2011.6.139.11.1.18.1.65Integer32 (1..20)read-writecurrent
hwRrmLbProbeReportInterval
OBJECT-TYPE
This object indicates the interval for reporting Probe frames. The default value is 120, in seconds.
1.3.6.1.4.1.2011.6.139.11.1.18.1.66Unsigned32 (30..300)read-writecurrent
hwRrmLbDeauthFailTime
OBJECT-TYPE
This object indicates the number of attempts to steer STAs in Deauthentication mode. The default value is 0.
1.3.6.1.4.1.2011.6.139.11.1.18.1.67Unsigned32 (0..5)read-writecurrent
hwRrmLbBtmFailTime
OBJECT-TYPE
This object indicates the number of attempts to steer STAs in BTM mode. The default value is 5.
1.3.6.1.4.1.2011.6.139.11.1.18.1.68Unsigned32 (0..10)read-writecurrent
hwRrmLbSteerRestrictTime
OBJECT-TYPE
This object indicates the time for suppressing STA association with non-target APs during STA steering. The default value is 5, in seconds.
1.3.6.1.4.1.2011.6.139.11.1.18.1.69Unsigned32 (0..10)read-writecurrent
hwRrmLbSteerProbeRestrictThreshold
OBJECT-TYPE
This object indicates the number of times non-target APs suppress STA Probe frames during STA steering. The default value is 5.
1.3.6.1.4.1.2011.6.139.11.1.18.1.70Unsigned32 (0..10)read-writecurrent
hwRrmLbSteerAuthRestrictThreshold
OBJECT-TYPE
This object indicates the number of times non-target APs suppress STA Probe frames during STA steering. The default value is 0.
1.3.6.1.4.1.2011.6.139.11.1.18.1.71Unsigned32 (0..5)read-writecurrent
hwRrmLbRssiDiffGap
OBJECT-TYPE
This object indicates the threshold of the RSSI gap between the associated radio and target radio. The default value is 5, in dB..
1.3.6.1.4.1.2011.6.139.11.1.18.1.72Unsigned32 (0..15)read-writecurrent
hwRrmSmartRoamAdvancedScan
OBJECT-TYPE
This object indicates the switch of advanced scan.
1.3.6.1.4.1.2011.6.139.11.1.18.1.73INTEGER {disable(1), enable(2)}read-writecurrent
hwRrmSmartRoamQuickKickoffBackOffTime
OBJECT-TYPE
This object indicates the back-off time of kick off.
1.3.6.1.4.1.2011.6.139.11.1.18.1.74Unsigned32 (1..600)read-writecurrent
hwRrmDynamicEdcaThresholdBE
OBJECT-TYPE
This object indicates the restrict threshold of edca.
1.3.6.1.4.1.2011.6.139.11.1.18.1.75Unsigned32 (1..1000)read-writecurrent
hwRrmCalibrate5gMaxTxPwr
OBJECT-TYPE
Calibrate 5g maximum TX power.
1.3.6.1.4.1.2011.6.139.11.1.18.1.76Unsigned32 (1..127)read-writecurrent
hwRrmCalibrate5gMinTxPwr
OBJECT-TYPE
Calibrate 5g minimum TX power.
1.3.6.1.4.1.2011.6.139.11.1.18.1.77Unsigned32 (1..127)read-writecurrent
hwRrmTpcRequestSwitch
OBJECT-TYPE
This object indicates the status of the tpc request function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.18.1.78INTEGER {disable(1), enable(2)}read-writecurrent
hwRrmLinkMeasurementSwitch
OBJECT-TYPE
This object indicates the status of the link measurement function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.18.1.79INTEGER {disable(1), enable(2)}read-writecurrent
hwRrmInterferenceImmuneSwitch
OBJECT-TYPE
This object indicates the status of the interference immune function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.18.1.80INTEGER {disable(1), enable(2)}read-writecurrent
hwRrmBssColorSwitch
OBJECT-TYPE
This object indicates the status of the bss color function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.18.1.81INTEGER {disable(1), enable(2)}read-writecurrent
hwRrmSpatialReuseSwitch
OBJECT-TYPE
This object indicates the status of the spatial reuse function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.18.1.82INTEGER {disable(1), enable(2)}read-writecurrent
hwAirScanProfileTable
OBJECT-TYPE
This table is used to configure air scan intervals, duration, and scan channel sets.
1.3.6.1.4.1.2011.6.139.11.1.19not-accessiblecurrent
hwAirScanProfileEntry
OBJECT-TYPE
The index of this table is hwAirScanProfileName.
1.3.6.1.4.1.2011.6.139.11.1.19.1not-accessiblecurrent
hwAirScanProfileName
OBJECT-TYPE
This object indicates the name of an air scan profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.19.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwAirScanPeriod
OBJECT-TYPE
This object indicates the air scan period. The default value is 60. It is expressed in ms.
1.3.6.1.4.1.2011.6.139.11.1.19.1.2Unsigned32 (60..100)read-writecurrent
hwAirScanInterval
OBJECT-TYPE
This object indicates the scan interval. The default value is 10000. The unit is 1ms.
1.3.6.1.4.1.2011.6.139.11.1.19.1.3Unsigned32 (300..600000)read-writecurrent
hwAirScanChannelSet
OBJECT-TYPE
This object indicates the scan channel set. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.19.1.4INTEGER {countryChannel(1), dcaChannel(2), workChannel(3)}read-writecurrent
hwAirScanProfilRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.? ROWSTATUS_UNDEFINED: undefined? ROWSTATUS_ACTIVE: active? ROWSTATUS_NOTINSERVICE: notInService? ROWSTATUS_NOTREADY: notReady? ROWSTATUS_CREATEANDFLOW: createAndGo? ROWSTATUS_CREATEANDWAIT: createAndWait? ROWSTATUS_DESTROY: destroy.
1.3.6.1.4.1.2011.6.139.11.1.19.1.5RowStatusread-writecurrent
hwAirScanVoiceAware
OBJECT-TYPE
This object indicates the voice aware set. The default value is enable.
1.3.6.1.4.1.2011.6.139.11.1.19.1.6INTEGER {disable(1), enable(2)}read-writecurrent
hwAirScanVideoAware
OBJECT-TYPE
This object indicates the video aware set. The default value is enable.
1.3.6.1.4.1.2011.6.139.11.1.19.1.7INTEGER {disable(1), enable(2)}read-writecurrent
hwAirScanSwitch
OBJECT-TYPE
This object indicates the scan switch status. The default value is enable.
1.3.6.1.4.1.2011.6.139.11.1.19.1.8INTEGER {disable(1), enable(2)}read-writecurrent
hwAirScanEnhancement
OBJECT-TYPE
This object indicates the scan enhancement status. The default value is disable.
1.3.6.1.4.1.2011.6.139.11.1.19.1.9INTEGER {disable(1), enable(2)}read-writecurrent
hwVapProfileTable
OBJECT-TYPE
This table is used to configure and query VAP profile parameters.
1.3.6.1.4.1.2011.6.139.11.1.20not-accessiblecurrent
hwVapProfileEntry
OBJECT-TYPE
The index of this table is hwVapProfileName.
1.3.6.1.4.1.2011.6.139.11.1.20.1not-accessiblecurrent
hwVapProfileName
OBJECT-TYPE
This object indicates the name of a VAP profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.20.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwVapForwardMode
OBJECT-TYPE
This object indicates the service forwarding mode. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.20.1.2INTEGER {unknown(1), directForward(2), tunnel(3), softgre(4)}read-writecurrent
hwVapTunnelForwardProtocol
OBJECT-TYPE
This object indicates the format of packets forwarded by tunnel. The default value is 0xd.? bit0: dot1x? bit1: dhcp? bit2: http? bit3: wapi? bit4: mdns.
1.3.6.1.4.1.2011.6.139.11.1.20.1.3Unsigned32read-writecurrent
hwVapServiceSwitch
OBJECT-TYPE
This object indicates the status of the VAP service function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.20.1.4INTEGER {disable(1), enable(2)}read-writecurrent
hwVapAutoOffStartTime
OBJECT-TYPE
This object indicates the start time of VAP profile. The format is HH:MM:SS.
1.3.6.1.4.1.2011.6.139.11.1.20.1.5OCTET STRING (SIZE(1..11))read-writecurrent
hwVapAutoOffEndTime
OBJECT-TYPE
This object indicates the end time of VAP profile. The format is HH:MM:SS.
1.3.6.1.4.1.2011.6.139.11.1.20.1.6OCTET STRING (SIZE(1..11))read-writecurrent
hwVapTemporaryManagementSwitch
OBJECT-TYPE
If this parameter is set to 2, the VAP automatically becomes the management VAP for offline APs after the AP is disconnected. It can still send signals so that maintenance personnel can access it to identify faults (the security mode is the non-authentication security mode and the SSID will be hidden). The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.20.1.7INTEGER {disable(1), enable(2)}read-writecurrent
hwVapServiceVlan
OBJECT-TYPE
This object indicates the service VLAN for the VAP. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.20.1.8Unsigned32 (1..4094)read-writecurrent
hwVapVlanPool
OBJECT-TYPE
This object indicates the VLAN pool to which the VAP is bound.
1.3.6.1.4.1.2011.6.139.11.1.20.1.9OCTET STRING (SIZE(0..31))read-writecurrent
hwVapType
OBJECT-TYPE
This object indicates the VAP type. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.20.1.10INTEGER {service(1), managementAp(2), managementAc(3), serviceBackupApOffline(4), radiusdownBackup(5), serviceNaviAc(6), managementLeaderAp(7)}read-writecurrent
hwVapStaAccessMode
OBJECT-TYPE
This object indicates the access mode. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.20.1.11INTEGER {disable(1), blacklist(2), whitelist(3)}read-writecurrent
hwVapStaAccessModePorfile
OBJECT-TYPE
This object indicates blacklist and whitelist profiles.
1.3.6.1.4.1.2011.6.139.11.1.20.1.12OCTET STRING (SIZE(0..35))read-writecurrent
hwVapRoamHomeAgent
OBJECT-TYPE
This object indicates the tunnel endpoint for inter-Layer 3 roaming. The default value is 1..
1.3.6.1.4.1.2011.6.139.11.1.20.1.13INTEGER {ap(1), ac(2)}read-writecurrent
hwVapRoamVlanMobilityGroup
OBJECT-TYPE
This object indicates the VLAN group for roaming. For the same VLAN, if the VAP is in different VLAN groups for roaming, the roaming is also inter-Layer 3 roaming. The default value is 1..
1.3.6.1.4.1.2011.6.139.11.1.20.1.14Unsigned32 (1..4094)read-writecurrent
hwVapRoamLayer3Switch
OBJECT-TYPE
This object indicates the status of the Layer 3 roaming function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.20.1.15INTEGER {disable(1), enable(2)}read-writecurrent
hwVapBandSteerSwitch
OBJECT-TYPE
This object indicates the status of the band steering function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.20.1.16INTEGER {disable(1), enable(2)}read-writecurrent
hwVapLearnIpv4Address
OBJECT-TYPE
This object indicates the status of the IPv4 address learning function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.20.1.17INTEGER {disable(1), enable(2)}read-writecurrent
hwVapLearnIpv6Address
OBJECT-TYPE
This object indicates the status of the IPv6 address learning function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.20.1.18INTEGER {disable(1), enable(2)}read-writecurrent
hwVapLearnIpv4AddressStrict
OBJECT-TYPE
This object indicates the status of the strict address learning (only through the DHCP) function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.20.1.19INTEGER {disable(1), enable(2), enableBlacklist(3)}read-writecurrent
hwVapIpBindCheck
OBJECT-TYPE
This object indicates the status of the IP binding relationship check function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.20.1.20INTEGER {disable(1), enable(2)}read-writecurrent
hwVapArpBindCheck
OBJECT-TYPE
This object indicates the status of the ARP binding relationship check function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.20.1.21INTEGER {disable(1), enable(2)}read-writecurrent
hwVapOptinon82InsertSwitch
OBJECT-TYPE
This object indicates the status of the function of appending the Option 82 field to DHCP messages. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.20.1.22INTEGER {disable(1), enable(2)}read-writecurrent
hwVapOptinon82InsertRidFormat
OBJECT-TYPE
This object indicates the format of remote-id(RID) in the Option 82 field to DHCP messages. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.20.1.23INTEGER {apMac(1), apMacSsid(2), userDefined(3), apName(4), apNameSsid(5), apLocation(6), apLocationSsid(7)}read-writecurrent
hwVapDhcpTrustPort
OBJECT-TYPE
This object indicates the status of the radio interface DHCP trust function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.20.1.24INTEGER {disable(1), enable(2)}read-writecurrent
hwVapNdTrustPort
OBJECT-TYPE
This object indicates the status of the radio interface ND trust function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.20.1.25INTEGER {disable(1), enable(2)}read-writecurrent
hwVapSecurityProfile
OBJECT-TYPE
The object indicates the security profile that is bound to the VAP. The default value is default.
1.3.6.1.4.1.2011.6.139.11.1.20.1.26OCTET STRING (SIZE(1..35))read-writecurrent
hwVapTrafficProfile
OBJECT-TYPE
The object indicates the traffic profile that is bound to the VAP. The default value is default.
1.3.6.1.4.1.2011.6.139.11.1.20.1.27OCTET STRING (SIZE(1..35))read-writecurrent
hwVapSsidProfile
OBJECT-TYPE
The object indicates the SSID profile that is bound to the VAP. The default value is default.
1.3.6.1.4.1.2011.6.139.11.1.20.1.28OCTET STRING (SIZE(1..35))read-writecurrent
hwVapAuthenticationProfile
OBJECT-TYPE
The object indicates the authentication profile that is bound to the VAP. The default value is default.
1.3.6.1.4.1.2011.6.139.11.1.20.1.29OCTET STRING (SIZE(0..35))read-writecurrent
hwVapSacProfile
OBJECT-TYPE
The object indicates the SAC profile that is bound to the VAP.
1.3.6.1.4.1.2011.6.139.11.1.20.1.30OCTET STRING (SIZE(0..35))read-writecurrent
hwVapProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.? ROWSTATUS_UNDEFINED: undefined? ROWSTATUS_ACTIVE: active? ROWSTATUS_NOTINSERVICE: notInService? ROWSTATUS_NOTREADY: notReady? ROWSTATUS_CREATEANDFLOW: createAndGo? ROWSTATUS_CREATEANDWAIT: createAndWait? ROWSTATUS_DESTROY: destroy.
1.3.6.1.4.1.2011.6.139.11.1.20.1.31RowStatusread-writecurrent
hwVapUserProfile
OBJECT-TYPE
The object indicates the user profile that is bound to the VAP.
1.3.6.1.4.1.2011.6.139.11.1.20.1.32OCTET STRING (SIZE(0..35))read-writecurrent
hwVapHotspot2Profile
OBJECT-TYPE
The object indicates the Hotspot2.0 profile that is bound to the VAP.
1.3.6.1.4.1.2011.6.139.11.1.20.1.33OCTET STRING (SIZE(0..35))read-writecurrent
hwSoftgreProfile
OBJECT-TYPE
The object indicates the Softgre profile that is bound to the VAP.
1.3.6.1.4.1.2011.6.139.11.1.20.1.34OCTET STRING (SIZE(0..35))read-writecurrent
hwVapOptinon82RidUserDefined
OBJECT-TYPE
This object indicates the user-defined format of remote-id(RID) in the Option 82 field to DHCP messages.
1.3.6.1.4.1.2011.6.139.11.1.20.1.35OCTET STRING (SIZE(1..255))read-writecurrent
hwVapOptinon82RidMacFormat
OBJECT-TYPE
This object indicates the AP MAC address format of remote-id(RID) in the Option 82 field to DHCP messages. The default value is 0.
1.3.6.1.4.1.2011.6.139.11.1.20.1.36INTEGER {default(0), normal(1), compact(2), hex(3)}read-writecurrent
hwVapOptinon82InsertCidFormat
OBJECT-TYPE
This object indicates the format of circuit-id(CID) in the Option 82 field to DHCP messages. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.20.1.37INTEGER {apMac(1), apMacSsid(2), userDefined(3), apName(4), apNameSsid(5), apLocation(6), apLocationSsid(7)}read-writecurrent
hwVapOptinon82CidUserDefined
OBJECT-TYPE
This object indicates the user-defined format of circuit-id(CID) in the Option 82 field to DHCP messages.
1.3.6.1.4.1.2011.6.139.11.1.20.1.38OCTET STRING (SIZE(1..255))read-writecurrent
hwVapOptinon82CidMacFormat
OBJECT-TYPE
This object indicates the AP MAC address format of circuit-id(CID) in the Option 82 field to DHCP messages. The default value is 0.
1.3.6.1.4.1.2011.6.139.11.1.20.1.39INTEGER {default(0), normal(1), compact(2), hex(3)}read-writecurrent
hwVapUccProfile
OBJECT-TYPE
The object indicates the UCC profile that is bound to the VAP.
1.3.6.1.4.1.2011.6.139.11.1.20.1.40OCTET STRING (SIZE(0..35))read-writecurrent
hwVapAntiAttackBroadcastFloodSwitch
OBJECT-TYPE
This object indicates the status of the VAP anti-attack braoadcast flood function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.20.1.41INTEGER {disable(1), enable(2)}read-writecurrent
hwVapAntiAttackBroadcastFloodStaRateThreshold
OBJECT-TYPE
This object indicates the anti-attack braoadcast flood sta-rate-threshold for the VAP. The default value is 10.
1.3.6.1.4.1.2011.6.139.11.1.20.1.42Unsigned32 (5..5000)read-writecurrent
hwVapAntiAttackBroadcastFloodBlacklistSwitch
OBJECT-TYPE
This object indicates the status of the VAP anti-attack braoadcast flood blacklist function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.20.1.43INTEGER {disable(1), enable(2)}read-writecurrent
hwVapLearnIpv6AddressStrict
OBJECT-TYPE
This object indicates the status of the strict address learning (only through the DHCPv6) function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.20.1.44INTEGER {disable(1), enable(2), enableBlacklist(3)}read-writecurrent
hwVapAntiAttackARPFloodSwitch
OBJECT-TYPE
This object indicates the status of the VAP anti-attack ARP flood function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.20.1.45INTEGER {disable(1), enable(2)}read-writecurrent
hwVapAntiAttackARPFloodStaRateThreshold
OBJECT-TYPE
This object indicates the anti-attack ARP flood sta-rate-threshold for the VAP. The default value is 5.
1.3.6.1.4.1.2011.6.139.11.1.20.1.46Unsigned32 (1..500)read-writecurrent
hwVapAntiAttackARPFloodBlacklistSwitch
OBJECT-TYPE
This object indicates the status of the VAP anti-attack ARP flood blacklist function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.20.1.47INTEGER {disable(1), enable(2)}read-writecurrent
hwVapAntiAttackNDFloodSwitch
OBJECT-TYPE
This object indicates the status of the VAP anti-attack ND flood function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.20.1.48INTEGER {disable(1), enable(2)}read-writecurrent
hwVapAntiAttackNDFloodStaRateThreshold
OBJECT-TYPE
This object indicates the anti-attack ND flood sta-rate-threshold for the VAP. The default value is 16.
1.3.6.1.4.1.2011.6.139.11.1.20.1.49Unsigned32 (1..500)read-writecurrent
hwVapAntiAttackNDFloodBlacklistSwitch
OBJECT-TYPE
This object indicates the status of the VAP anti-attack ND flood blacklist function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.20.1.50INTEGER {disable(1), enable(2)}read-writecurrent
hwVapAntiAttackIGMPFloodSwitch
OBJECT-TYPE
This object indicates the status of the VAP anti-attack IGMP flood function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.20.1.51INTEGER {disable(1), enable(2)}read-writecurrent
hwVapAntiAttackIGMPFloodStaRateThreshold
OBJECT-TYPE
This object indicates the anti-attack IGMP flood sta-rate-threshold for the VAP. The default value is 4.
1.3.6.1.4.1.2011.6.139.11.1.20.1.52Unsigned32 (1..500)read-writecurrent
hwVapAntiAttackIGMPFloodBlacklistSwitch
OBJECT-TYPE
This object indicates the status of the VAP anti-attack IGMP flood blacklist function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.20.1.53INTEGER {disable(1), enable(2)}read-writecurrent
hwVapDefenceProfile
OBJECT-TYPE
The object indicates the Defence profile that is bound to the VAP.
1.3.6.1.4.1.2011.6.139.11.1.20.1.54OCTET STRING (SIZE(0..32))read-writecurrent
hwVapTimeRange
OBJECT-TYPE
The object indicates the TimeRange .
1.3.6.1.4.1.2011.6.139.11.1.20.1.55OCTET STRING (SIZE(0..32))read-writecurrent
hwVapPermitVlanList
OBJECT-TYPE
This object indicates the PermitVlanList. The default value is 0.
1.3.6.1.4.1.2011.6.139.11.1.20.1.56OCTET STRING (SIZE(0..1024))read-writecurrent
hwVapSfnRoamSwitch
OBJECT-TYPE
This object indicates the status of the SFN Roam function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.20.1.57INTEGER {disable(1), enable(2)}read-writecurrent
hwVapStaNetworkDetectSwitch
OBJECT-TYPE
This object indicates the status of sta network reachable detect function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.20.1.58INTEGER {disable(1), enable(2)}read-writecurrent
hwVapLearnIpv4AddressIpconflictuncheck
OBJECT-TYPE
This object indicates the status of the IPv4 address conflict check function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.20.1.59INTEGER {disable(1), enable(2)}read-writecurrent
hwVapLearnIpv6AddressIpconflictuncheck
OBJECT-TYPE
This object indicates the status of the IPv6 address conflict check function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.20.1.60INTEGER {disable(1), enable(2)}read-writecurrent
hwVapRadiusTemplate
OBJECT-TYPE
This object indicates the name of radius-server template.
1.3.6.1.4.1.2011.6.139.11.1.20.1.61OCTET STRING (SIZE(0..32))read-writecurrent
hwVapBackUpState
OBJECT-TYPE
This object indicates the state of the radiusdownBackup vap.
1.3.6.1.4.1.2011.6.139.11.1.20.1.62INTEGER {off(1), on(2), invalid(3)}read-writecurrent
hwVapBackUpMode
OBJECT-TYPE
This object indicates the mode of the switch which triges vap on or off.
1.3.6.1.4.1.2011.6.139.11.1.20.1.63INTEGER {manual(1), auto(2), invalid(3)}read-onlycurrent
hwVapRadiusState
OBJECT-TYPE
This object indicates the state of radius server.
1.3.6.1.4.1.2011.6.139.11.1.20.1.64INTEGER {up(1), down(2), invalid(3)}read-onlycurrent
hwVapKeepServiceSwitch
OBJECT-TYPE
This object indicates the status of vap keep service function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.20.1.65INTEGER {enable(1), disable(2), allowaccess(3), allowAccessAlsoNoauth(4)}read-writecurrent
hwVapNaviACID
OBJECT-TYPE
This object indicates the AC index.
1.3.6.1.4.1.2011.6.139.11.1.20.1.66Unsigned32 (4294967295 | 0..15)read-writecurrent
hwVapNaviACWlanId
OBJECT-TYPE
This object indicates the wlan index.
1.3.6.1.4.1.2011.6.139.11.1.20.1.67Unsigned32 (4294967295 | 1..16)read-writecurrent
hwVapHighwayEnable
OBJECT-TYPE
This object indicates the status of vap highway status. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.20.1.68INTEGER {disable(1), enable(2)}read-writecurrent
hwVapServiceExpAnalysisSwitch
OBJECT-TYPE
This object indicates the status of service experience analysis. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.20.1.69INTEGER {disable(1), enable(2)}read-writecurrent
hwVapServiceExpAnalysisSnoopingPort
OBJECT-TYPE
This object indicates SIP snooping port. The default value is 5060.
1.3.6.1.4.1.2011.6.139.11.1.20.1.70Unsigned32 (1..65535)read-writecurrent
hwVapAutonavigationRoamOptimizeSwitch
OBJECT-TYPE
This object indicates whether to enable autonavigation roaming optimization.
1.3.6.1.4.1.2011.6.139.11.1.20.1.71INTEGER {disable(1), enable(2)}read-writecurrent
hwVapMdnsPolicyLocalACSwitch
OBJECT-TYPE
This object indicates the status of vap MDNS policy on local ac. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.20.1.72INTEGER {disable(1), enable(2)}read-writecurrent
hwVapProfileMdnsSnooping
OBJECT-TYPE
This object indicates the switch of MDNS snooping. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.20.1.73INTEGER {disable(1), enable(2)}read-writecurrent
hwVapSplitTunnelAcl
OBJECT-TYPE
This object indicates configure of split tunnel ACL.
1.3.6.1.4.1.2011.6.139.11.1.20.1.74Unsigned32 (3000..3031)read-writecurrent
hwVapSplitTunnelAclIPv6
OBJECT-TYPE
This object indicates configure of split tunnel IPv6 ACL.
1.3.6.1.4.1.2011.6.139.11.1.20.1.75Unsigned32 (3000..3031)read-writecurrent
hwVapApZoneName
OBJECT-TYPE
This object indicates the zone name of vap.
1.3.6.1.4.1.2011.6.139.11.1.20.1.76OCTET STRING (SIZE(0..35))read-writecurrent
hwVapRadio
OBJECT-TYPE
This object indicates the radio that vap takes effect. The default value is 0.
1.3.6.1.4.1.2011.6.139.11.1.20.1.77Unsigned32 (0..7)read-writecurrent
hwVapProfileMuBaTriggerMode
OBJECT-TYPE
This object indicates the trigger mode of sending MU-BA. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.20.1.78INTEGER {basictrigger(1), mubar(2)}read-writecurrent
hwVapProfileDynamicFlowInspection
OBJECT-TYPE
This object indicates the switch of dynamic flow inspection. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.20.1.79INTEGER {disable(1), enable(2)}read-writecurrent
hwVapiConnectSwitch
OBJECT-TYPE
This object indicates the switch of iconnect. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.20.1.80INTEGER {disable(1), enable(2)}read-writecurrent
hwSsidProfileTable
OBJECT-TYPE
This table is used to configure and query SSID profile parameters.
1.3.6.1.4.1.2011.6.139.11.1.21not-accessiblecurrent
hwSsidProfileEntry
OBJECT-TYPE
The index of this table is hwSsidProfileName.
1.3.6.1.4.1.2011.6.139.11.1.21.1not-accessiblecurrent
hwSsidProfileName
OBJECT-TYPE
This object indicates the name of a SSID profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.21.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwSsidText
OBJECT-TYPE
This object indicates the SSID character string. The default value is HUAWEI-WLAN.
1.3.6.1.4.1.2011.6.139.11.1.21.1.2OCTET STRING (SIZE(1..32))read-writecurrent
hwSsidHide
OBJECT-TYPE
This object indicates whether to enable SSID hiding. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.21.1.3INTEGER {disable(1), enable(2)}read-writecurrent
hwSsidAssocTimeout
OBJECT-TYPE
This object indicates the association timeout period of a user. The default value is 5 minutes.
1.3.6.1.4.1.2011.6.139.11.1.21.1.4Unsigned32 (1..30)read-writecurrent
hwSsidMaxStaNum
OBJECT-TYPE
The object indicates the number of access users on a VAP. The default value is 64.
1.3.6.1.4.1.2011.6.139.11.1.21.1.5Unsigned32 (1..512)read-writecurrent
hwSsidLegacyStaSwitch
OBJECT-TYPE
This object indicates whether to allow access from legacy terminals. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.21.1.6INTEGER {disable(1), enable(2), onlyDot11bDisable(3)}read-writecurrent
hwSsidDtimInterval
OBJECT-TYPE
This object indicates the DTIM interval. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.21.1.7Unsigned32 (1..255)read-writecurrent
hwSsidClientEdcaVoiceECWmax
OBJECT-TYPE
This object indicates the ECWmax value, which determines the average avoidance time. The value of this object is the ECWmax value of the AC_VO queue on the station. The default value is 3.
1.3.6.1.4.1.2011.6.139.11.1.21.1.8Unsigned32 (0..15)read-writecurrent
hwSsidClientEdcaVoiceECWmin
OBJECT-TYPE
This object indicates the ECWmin value, which determines the average avoidance time. The value of this object is the ECWmin value of the AC_VO queue on the station. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.21.1.9Unsigned32 (0..15)read-writecurrent
hwSsidClientEdcaVoiceAIFSN
OBJECT-TYPE
This object indicates the AIFSN value, which determines the idle waiting time. The value of this object is the AIFSN value of the AC_VO queue on the station. The default value is 2. In V200R019C10 and later versions, 1 is not supported and will switch to 2 automatically.
1.3.6.1.4.1.2011.6.139.11.1.21.1.10Unsigned32 (1..15)read-writecurrent
hwSsidClientEdcaVoiceTXOPLimit
OBJECT-TYPE
This object indicates the TXOPLimit value, which determines the time for occupying the channel. The value of this object is the TXOPLimit value of the AC_VO queue on the station. The default value is 47.
1.3.6.1.4.1.2011.6.139.11.1.21.1.11Unsigned32 (0..255)read-writecurrent
hwSsidClientEdcaVideoECWmax
OBJECT-TYPE
This object indicates the ECWmax value, which determines the average avoidance time. The value of this object is the ECWmax value of the AC_VI queue on the station. The default value is 4.
1.3.6.1.4.1.2011.6.139.11.1.21.1.12Unsigned32 (0..15)read-writecurrent
hwSsidClientEdcaVideoECWmin
OBJECT-TYPE
This object indicates the ECWmin value, which determines the average avoidance time. The value of this object is the ECWmin value of the AC_VI queue on the station. The default value is 3.
1.3.6.1.4.1.2011.6.139.11.1.21.1.13Unsigned32 (0..15)read-writecurrent
hwSsidClientEdcaVideoAIFSN
OBJECT-TYPE
This object indicates the AIFSN value, which determines the idle waiting time. The value of this object is the AIFSN value of the AC_VI queue on the station. The default value is 2. In V200R019C10 and later versions, 1 is not supported and will switch to 2 automatically.
1.3.6.1.4.1.2011.6.139.11.1.21.1.14Unsigned32 (1..15)read-writecurrent
hwSsidClientEdcaVideoTXOPLimit
OBJECT-TYPE
This object indicates the TXOPLimit value, which determines the time for occupying the channel. The value of this object is the TXOPLimit value of the AC_VI queue on the station. The default value is 94.
1.3.6.1.4.1.2011.6.139.11.1.21.1.15Unsigned32 (0..255)read-writecurrent
hwSsidClientEdcaBeECWmax
OBJECT-TYPE
This object indicates the ECWmax value, which determines the average avoidance time. The value of this object is the ECWmax value of the AC_BE queue on the station. The default value is 10.
1.3.6.1.4.1.2011.6.139.11.1.21.1.16Unsigned32 (0..15)read-writecurrent
hwSsidClientEdcaBeECWmin
OBJECT-TYPE
This object indicates the ECWmin value, which determines the average avoidance time. The value of this object is the ECWmin value of the AC_BE queue on the station. The default value is 4.
1.3.6.1.4.1.2011.6.139.11.1.21.1.17Unsigned32 (0..15)read-writecurrent
hwSsidClientEdcaBeAIFSN
OBJECT-TYPE
This object indicates the AIFSN value, which determines the idle waiting time. The value of this object is the AIFSN value of the AC_BE queue on the station. The default value is 3. In V200R019C10 and later versions, 1 is not supported and will switch to 2 automatically.
1.3.6.1.4.1.2011.6.139.11.1.21.1.18Unsigned32 (1..15)read-writecurrent
hwSsidClientEdcaBeTXOPLimit
OBJECT-TYPE
This object indicates the TXOPLimit value, which determines the time for occupying the channel. The value of this object is the TXOPLimit value of the AC_BE queue on the station. The default value is 0.
1.3.6.1.4.1.2011.6.139.11.1.21.1.19Unsigned32 (0..255)read-writecurrent
hwSsidClientEdcaBkECWmax
OBJECT-TYPE
This object indicates the ECWmax value, which determines the average avoidance time. The value of this object is the ECWmax value of the AC_BK queue on the station. The default value is 10.
1.3.6.1.4.1.2011.6.139.11.1.21.1.20Unsigned32 (0..15)read-writecurrent
hwSsidClientEdcaBkECWmin
OBJECT-TYPE
This object indicates the ECWmin value, which determines the average avoidance time. The value of this object is the ECWmin value of the AC_BK queue on the station. The default value is 4.
1.3.6.1.4.1.2011.6.139.11.1.21.1.21Unsigned32 (0..15)read-writecurrent
hwSsidClientEdcaBkAIFSN
OBJECT-TYPE
This object indicates the AIFSN value, which determines the idle waiting time. The value of this object is the AIFSN value of the AC_BK queue on the station. The default value is 7. In V200R019C10 and later versions, 1 is not supported and will switch to 2 automatically.
1.3.6.1.4.1.2011.6.139.11.1.21.1.22Unsigned32 (1..15)read-writecurrent
hwSsidClientEdcaBkTXOPLimit
OBJECT-TYPE
This object indicates the TXOPLimit value, which determines the time for occupying the channel. The value of this object is the TXOPLimit value of the AC_BK queue on the station. The default value is 0.
1.3.6.1.4.1.2011.6.139.11.1.21.1.23Unsigned32 (0..255)read-writecurrent
hwSsidInboundCarCir
OBJECT-TYPE
This object indicates the inbound committed information rate (CIR) of the SSID. The default value is 0 kbit/s. Invalid value is 1 to 63.
1.3.6.1.4.1.2011.6.139.11.1.21.1.24Unsigned32 (0..4294967295)read-writecurrent
hwSsidInboundCarPir
OBJECT-TYPE
This object indicates the inbound peak information rate (PIR) of the SSID. The default value is 0 kbit/s. Invalid value is 1 to 63.
1.3.6.1.4.1.2011.6.139.11.1.21.1.25Unsigned32 (0..4294967295)read-writecurrent
hwSsidInboundCarCbs
OBJECT-TYPE
This object indicates the inbound committed burst size (CBS) of the SSID. The default value is 0 bytes. Invalid value is 1 to 1499.
1.3.6.1.4.1.2011.6.139.11.1.21.1.26Unsigned32 (0..4294967295)read-writecurrent
hwSsidInboundCarPbs
OBJECT-TYPE
This object indicates the inbound peak burst size (PBS) of the SSID. The default value is 0 bytes. Invalid value is 1 to 1499.
1.3.6.1.4.1.2011.6.139.11.1.21.1.27Unsigned32 (0..4294967295)read-writecurrent
hwSsidOutboundCarCir
OBJECT-TYPE
This object indicates the outbound committed information rate (CIR) of the SSID. The default value is 0 kbit/s. Invalid value is 1 to 63.
1.3.6.1.4.1.2011.6.139.11.1.21.1.28Unsigned32 (0..4294967295)read-writecurrent
hwSsidOutboundCarPir
OBJECT-TYPE
This object indicates the outbound peak information rate (PIR) of the SSID. The default value is 0 kbit/s. Invalid value is 1 to 63.
1.3.6.1.4.1.2011.6.139.11.1.21.1.29Unsigned32 (0..4294967295)read-writecurrent
hwSsidOutboundCarCbs
OBJECT-TYPE
This object indicates the outbound committed burst size (CBS) of the SSID. The default value is 0 bytes. Invalid value is 1 to 1499.
1.3.6.1.4.1.2011.6.139.11.1.21.1.30Unsigned32 (0..4294967295)read-writecurrent
hwSsidOutboundCarPbs
OBJECT-TYPE
This object indicates the outbound peak burst size (PBS) of the SSID. The default value is 0 bytes. Invalid value is 1 to 1499.
1.3.6.1.4.1.2011.6.139.11.1.21.1.31Unsigned32 (0..4294967295)read-writecurrent
hwSsidProfileRowStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.21.1.32RowStatusread-writecurrent
hwSsidHideWhileReachMaxSta
OBJECT-TYPE
This object indicates the disposal method when the number of stations reaches the specified threshold. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.21.1.33INTEGER {advertiseSSID(1), hideSSID(2), replaceBasedOnPriority(3)}read-writecurrent
hwSsidBeacon2gRate
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.21.1.34INTEGER {one(1), two(2), five(5), six(6), nine(9), eleven(11), twelve(12), eighteen(18), twentyfour(24), thirtysix(36), fortyeight(48), fiftyfour(54)}read-writecurrent
hwSsidBeacon5gRate
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.21.1.35INTEGER {six(6), nine(9), twelve(12), eighteen(18), twentyfour(24), thirtysix(36), fortyeight(48), fiftyfour(54)}read-writecurrent
hwSsidDenyBroadcastProbe
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.21.1.36INTEGER {disable(1), enable(2)}read-writecurrent
hwSsidProbeResponseRetry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.21.1.37Unsigned32 (0..3)read-writecurrent
hwSsidUapsd
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.21.1.38INTEGER {disable(1), enable(2)}read-writecurrent
hwSsidActiveDullClient
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.21.1.39INTEGER {disable(1), enable(2)}read-writecurrent
hwSsidMuMIMOSwitch
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.21.1.40INTEGER {disable(1), enable(2)}read-writecurrent
hwSsidProfile80211rEnable
OBJECT-TYPE
This object indicates the switch of 802.11r.
1.3.6.1.4.1.2011.6.139.11.1.21.1.41INTEGER {disable(1), enable(2)}read-writecurrent
hwSsidProfile80211rMode
OBJECT-TYPE
This object indicates the mode of 802.11r.
1.3.6.1.4.1.2011.6.139.11.1.21.1.42INTEGER {unknown(0), overtheair(1), overtheds(2)}read-writecurrent
hwSsidProfile80211rReassociateTimeout
OBJECT-TYPE
This object indicates the reassociate timeout of 802.11r.
1.3.6.1.4.1.2011.6.139.11.1.21.1.43Integer32 (0..10)read-writecurrent
hwSsidQbssLoadSwitch
OBJECT-TYPE
This object indicates the qbss load switch of VAP.
1.3.6.1.4.1.2011.6.139.11.1.21.1.44INTEGER {disable(1), enable(2)}read-writecurrent
hwSsidSingleTxchainSwitch
OBJECT-TYPE
This object indicates the single txchain switch of VAP.
1.3.6.1.4.1.2011.6.139.11.1.21.1.45INTEGER {disable(1), enable(2)}read-writecurrent
hwSsidMuMIMOOptimizeSwitch
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.21.1.46INTEGER {disable(1), enable(2)}read-writecurrent
hwSsidAdvertiseApNameSwitch
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.21.1.47INTEGER {disable(1), enable(2)}read-writecurrent
hwSsidServiceGuarantee
OBJECT-TYPE
This object indicates the service guarantee switch of VAP.
1.3.6.1.4.1.2011.6.139.11.1.21.1.48INTEGER {performanceFirst(1), reliabilityFirst(2)}read-writecurrent
hwSsidInterAcRoamSwitch
OBJECT-TYPE
This object indicates the inter-ac roam switch of SSID.
1.3.6.1.4.1.2011.6.139.11.1.21.1.49INTEGER {enable(1), disable(2)}read-writecurrent
hwSsidVhtTxNssCount
OBJECT-TYPE
This object indicates the maximum number of VHT TX spatial streams.
1.3.6.1.4.1.2011.6.139.11.1.21.1.50Unsigned32 (1..8 | 255)read-writecurrent
hwSsidVhtRxNssCount
OBJECT-TYPE
This object indicates the maximum number of VHT RX spatial streams.
1.3.6.1.4.1.2011.6.139.11.1.21.1.51Unsigned32 (1..8 | 255)read-writecurrent
hwSsidVhtTxMcsMap
OBJECT-TYPE
This object indicates the maximum VHT TX MCS value.
1.3.6.1.4.1.2011.6.139.11.1.21.1.52Unsigned32 (7..9 | 255)read-writecurrent
hwSsidVhtRxMcsMap
OBJECT-TYPE
This object indicates the maximum VHT RX MCS value.
1.3.6.1.4.1.2011.6.139.11.1.21.1.53Unsigned32 (7..9 | 255)read-writecurrent
hwSsidHETxNssCount
OBJECT-TYPE
This object indicates the maximum number of HE TX spatial streams.
1.3.6.1.4.1.2011.6.139.11.1.21.1.54Unsigned32 (1..8)read-writecurrent
hwSsidHERxNssCount
OBJECT-TYPE
This object indicates the maximum number of HE RX spatial streams.
1.3.6.1.4.1.2011.6.139.11.1.21.1.55Unsigned32 (1..8)read-writecurrent
hwSsidHETxMcsMap
OBJECT-TYPE
This object indicates the maximum HE TX MCS value.
1.3.6.1.4.1.2011.6.139.11.1.21.1.56Unsigned32 (7 | 9 | 11)read-writecurrent
hwSsidHERxMcsMap
OBJECT-TYPE
This object indicates the maximum HE RX MCS value.
1.3.6.1.4.1.2011.6.139.11.1.21.1.57Unsigned32 (7 | 9 | 11)read-writecurrent
hwSsidBeamformingSwitch
OBJECT-TYPE
This object indicates the transmit beamforming switch of SSID. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.21.1.58INTEGER {disable(1), enable(2)}read-writecurrent
hwSsidProfilePartialMumimoDownlinkSwitch
OBJECT-TYPE
This object indicates whether to enable the partial-mu-mimo downlink function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.21.1.59INTEGER {disable(1), enable(2)}read-writecurrent
hwSsidProfileOfdmaDownlinkSwitch
OBJECT-TYPE
This object indicates whether to enable the OFDMA downlink function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.21.1.60INTEGER {disable(1), enable(2)}read-writecurrent
hwSsidProfileOfdmaUplinkSwitch
OBJECT-TYPE
This object indicates whether to enable the OFDMA uplink function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.21.1.61INTEGER {disable(1), enable(2)}read-writecurrent
hwSsidTwtSwitch
OBJECT-TYPE
This object indicates whether to enable the twt function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.21.1.62INTEGER {disable(1), enable(2)}read-writecurrent
hwSsidProfile80211rPrivateSwitch
OBJECT-TYPE
This object indicates if 11r private is enabled. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.21.1.63INTEGER {disable(1), enable(2)}read-writecurrent
hwSsidGameTurboSwitch
OBJECT-TYPE
This object indicates the game-turbo switch of SSID.
1.3.6.1.4.1.2011.6.139.11.1.21.1.64INTEGER {disable(1), enable(2)}read-writecurrent
hwSecurityProfileTable
OBJECT-TYPE
This table is used to describe the information of a security profile.
1.3.6.1.4.1.2011.6.139.11.1.22not-accessiblecurrent
hwSecurityProfileEntry
OBJECT-TYPE
The index of this table is hwSecurityProfileName.
1.3.6.1.4.1.2011.6.139.11.1.22.1not-accessiblecurrent
hwSecurityProfileName
OBJECT-TYPE
This object indicates the name of a security profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.22.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwSecurityPolicy
OBJECT-TYPE
This object indicates the air interface authentication policy. The default value is 8(open).
1.3.6.1.4.1.2011.6.139.11.1.22.1.2INTEGER {wapiCert(1), wapiPsk(2), wpaDot1x(3), wpaPsk(4), wpa2Dot1x(5), wpa2Psk(6), wepShareKey(7), open(8), wpaWpa2Psk(9), wpaWpa2Dot1x(10), wepNoauth(11), wepDynamic(12), wpaPpsk(13), wpa2Ppsk(14), wpaWpa2Ppsk(15), wpa3Sae(16), wpa2Wpa3PskSae(17), wpa3Dot1x(18)}read-writecurrent
hwSecurityWepEncrypt
OBJECT-TYPE
This object indicates the WEP encryption algorithm. The default value is 4369.
1.3.6.1.4.1.2011.6.139.11.1.22.1.3Unsigned32 (0..65535)read-writecurrent
hwSecurityWepPskMode
OBJECT-TYPE
This object indicates that the WEP PSK mode is PassPhase or Hex. The default value is 4369.
1.3.6.1.4.1.2011.6.139.11.1.22.1.4Unsigned32 (0..65535)read-writecurrent
hwSecurityWepPsk1
OBJECT-TYPE
This object indicates the WEP PSK1.
1.3.6.1.4.1.2011.6.139.11.1.22.1.5OCTET STRING (SIZE(1..68))read-writecurrent
hwSecurityWepPsk2
OBJECT-TYPE
This object indicates the WEP PSK2.
1.3.6.1.4.1.2011.6.139.11.1.22.1.6OCTET STRING (SIZE(1..68))read-writecurrent
hwSecurityWepPsk3
OBJECT-TYPE
This object indicates the WEP PSK3.
1.3.6.1.4.1.2011.6.139.11.1.22.1.7OCTET STRING (SIZE(1..68))read-writecurrent
hwSecurityWepPsk4
OBJECT-TYPE
This object indicates the WEP PSK4.
1.3.6.1.4.1.2011.6.139.11.1.22.1.8OCTET STRING (SIZE(1..68))read-writecurrent
hwSecurityWepDefaultKeyId
OBJECT-TYPE
This object indicates the default key ID for WEP. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.22.1.9Unsigned32 (1..4)read-writecurrent
hwSecurityWpaEncrypt
OBJECT-TYPE
This object indicates the WPA/WPA2/WPA3 encryption algorithm.
1.3.6.1.4.1.2011.6.139.11.1.22.1.10INTEGER {unknown(0), wpaAes(1), wpaTkip(2), wpaAesTkip(3), wpaTkipWpa2Aes(4), wpaGcmp256(5)}read-writecurrent
hwSecurityWpaPskMode
OBJECT-TYPE
This object indicates whether the WPA PSK mode is PassPhase or Hex.
1.3.6.1.4.1.2011.6.139.11.1.22.1.11INTEGER {pskPassphase(1), pskHex(2)}read-writecurrent
hwSecurityWpaPsk
OBJECT-TYPE
This object indicates the WPA/WPA2 PSK.
1.3.6.1.4.1.2011.6.139.11.1.22.1.12OCTET STRING (SIZE(0 | 6 | 8..108))read-writecurrent
hwSecurityWpaPtkUpdateSwitch
OBJECT-TYPE
This object indicates the status of WPA PTK update function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.22.1.13INTEGER {disable(1), enable(2)}read-writecurrent
hwSecurityWpaPtkUpdateInterval
OBJECT-TYPE
This object indicates the WPA PTK update interval. The default value is 43200 seconds.
1.3.6.1.4.1.2011.6.139.11.1.22.1.14Unsigned32 (43200..86400)read-writecurrent
hwSecurityWapiPskMode
OBJECT-TYPE
This object indicates the WAPI PSK mode. The default value is 1. 1:pskPassphase 2:pskHex.
1.3.6.1.4.1.2011.6.139.11.1.22.1.15INTEGER {pskPassphase(1), pskHex(2)}read-writecurrent
hwSecurityWapiPsk
OBJECT-TYPE
This object indicates the WAPI PSK.
1.3.6.1.4.1.2011.6.139.11.1.22.1.16OCTET STRING (SIZE(0 | 6 | 8..108))read-writecurrent
hwSecurityWapiAsuIpAddress
OBJECT-TYPE
This object indicates the IP address of the WAPI ASU.
1.3.6.1.4.1.2011.6.139.11.1.22.1.17IpAddressread-writecurrent
hwSecurityWapiIssuerCertFileName
OBJECT-TYPE
This object indicates the certificate file name of the WAPI issuer.
1.3.6.1.4.1.2011.6.139.11.1.22.1.18OCTET STRING (SIZE(0..255))read-writecurrent
hwSecurityWapiAsuCertFileName
OBJECT-TYPE
This object indicate the certificate file name of the WAPI ASU.
1.3.6.1.4.1.2011.6.139.11.1.22.1.19OCTET STRING (SIZE(0..255))read-writecurrent
hwSecurityWapiAcCertFileName
OBJECT-TYPE
This object indicate the certificate file name of the WAPI AC.
1.3.6.1.4.1.2011.6.139.11.1.22.1.20OCTET STRING (SIZE(0..255))read-writecurrent
hwSecurityWapiAcPrvKeyFileName
OBJECT-TYPE
This object indicates the private key file name of the WAPI AC.
1.3.6.1.4.1.2011.6.139.11.1.22.1.21OCTET STRING (SIZE(0..255))read-writecurrent
hwSecurityWapiIssuerPfxPassword
OBJECT-TYPE
This object indicates the WAPI issuer certificate key.
1.3.6.1.4.1.2011.6.139.11.1.22.1.22OCTET STRING (SIZE(0..68))read-writecurrent
hwSecurityWapiAsuPfxPassword
OBJECT-TYPE
This object indicates the WAPI ASU certificate key.
1.3.6.1.4.1.2011.6.139.11.1.22.1.23OCTET STRING (SIZE(0..68))read-writecurrent
hwSecurityWapiAcPfxPassword
OBJECT-TYPE
This object indicates the WAPI AC certificate key.
1.3.6.1.4.1.2011.6.139.11.1.22.1.24OCTET STRING (SIZE(0..68))read-writecurrent
hwSecurityWapiAcPrvKeyPassword
OBJECT-TYPE
This object indicates the key for reading the AC private key file.
1.3.6.1.4.1.2011.6.139.11.1.22.1.25OCTET STRING (SIZE(0..68))read-writecurrent
hwSecurityWapiCertRetransCount
OBJECT-TYPE
This object indicates the number of retransmissions of WAPI certificate authentication packets. The default value is 3.
1.3.6.1.4.1.2011.6.139.11.1.22.1.26Unsigned32 (1..10)read-writecurrent
hwSecurityWapiBkThreshold
OBJECT-TYPE
This object indicates the WAPI BK lifetime percentage. The default value is 70.
1.3.6.1.4.1.2011.6.139.11.1.22.1.27Unsigned32 (1..100)read-writecurrent
hwSecurityWapiBkLifetime
OBJECT-TYPE
This object indicates the interval for updating the WAPI BK. The default value is 43200 seconds.
1.3.6.1.4.1.2011.6.139.11.1.22.1.28Unsigned32 (600..604800)read-writecurrent
hwSecurityWapiUskUpdateMethod
OBJECT-TYPE
This object indicates the WAPI USK update mode. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.22.1.29INTEGER {disabled(1), timeBased(2), packetBased(3), timepacketBased(4)}read-writecurrent
hwSecurityWapiMskUpdateMethod
OBJECT-TYPE
This object indicates the WAPI MSK update mode. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.22.1.30INTEGER {disabled(1), timeBased(2), packetBased(3), timepacketBased(4)}read-writecurrent
hwSecurityWapiUskUpdateInterval
OBJECT-TYPE
This object indicates the time-based interval for updating the WAPI USK. The default value is 86400 seconds.
1.3.6.1.4.1.2011.6.139.11.1.22.1.31Unsigned32 (600..604800)read-writecurrent
hwSecurityWapiUskUpdatePackets
OBJECT-TYPE
This object indicates the number of packets that will trigger WAPI USK update. The default value is 10.
1.3.6.1.4.1.2011.6.139.11.1.22.1.32Unsigned32 (1..4200000)read-writecurrent
hwSecurityWapiUskRetansCount
OBJECT-TYPE
This object indicates the maximum number of retransmissions of a WAPI USK negotiation packet. The default value is 3.
1.3.6.1.4.1.2011.6.139.11.1.22.1.33Unsigned32 (1..10)read-writecurrent
hwSecurityWapiMskUpdateInterval
OBJECT-TYPE
This object indicates the time-based interval for updating the WAPI MSK. The default value is 86400 seconds.
1.3.6.1.4.1.2011.6.139.11.1.22.1.34Unsigned32 (600..604800)read-writecurrent
hwSecurityWapiMskUpdatePackets
OBJECT-TYPE
This object indicates the number of packets that will trigger WAPI MSK update. The default value is 10.
1.3.6.1.4.1.2011.6.139.11.1.22.1.35Unsigned32 (1..4200000)read-writecurrent
hwSecurityWapiMskRetansCount
OBJECT-TYPE
This object indicates the maximum number of retransmissions of a WAPI MSK negotiation packet. The default value is 3.
1.3.6.1.4.1.2011.6.139.11.1.22.1.36Unsigned32 (1..10)read-writecurrent
hwSecurityWapiSATimeout
OBJECT-TYPE
This object indicates the timeout period of a WAPI-based security association (SA). The default value is 60 seconds.
1.3.6.1.4.1.2011.6.139.11.1.22.1.37Unsigned32 (1..255)read-writecurrent
hwSecurityPMF
OBJECT-TYPE
This object indicates the status of the PMF function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.22.1.38Unsigned32 (1..3)read-writecurrent
hwSecurityProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.22.1.39RowStatusread-writecurrent
hwSecurityWepDot1xMode
OBJECT-TYPE
This object indicates that the WEP DOT1X key mode is wep40, wep104 or wep128. bit0~bit3:key0;bit4~bit7:key1;bit8~bit11:key2;bit12~bit16:key3.0:invalid;1:wep40;2:wep104;3:wep128.
1.3.6.1.4.1.2011.6.139.11.1.22.1.40Unsigned32read-writecurrent
hwAPTrafficProfileTable
OBJECT-TYPE
This table is used to configure and query traffic profile parameters.
1.3.6.1.4.1.2011.6.139.11.1.23not-accessiblecurrent
hwAPTrafficProfileEntry
OBJECT-TYPE
The index of this table is hwAPTrafficProfileName.
1.3.6.1.4.1.2011.6.139.11.1.23.1not-accessiblecurrent
hwAPTrafficProfileName
OBJECT-TYPE
This object indicates the name of a traffic profile.
1.3.6.1.4.1.2011.6.139.11.1.23.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwAPTrafficProfilePriorityMapDnTrustMode
OBJECT-TYPE
This object indicates the downstream service priority mapping mode. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.23.1.2INTEGER {trustDSCP(1), trust8021P(2)}read-writecurrent
hwAPTrafficProfilePriorityDscpDnMap80211e
OBJECT-TYPE
This object indicates the mapping relationship between 802.1p priorities of 802.3 packets and user priorities of 802.11 packets when data packets are sent to a downstream AP. DSCP values range from 0 to 63 and 802.11e priorities range from 0 to 7. Two mapped data are separated by a comma.
1.3.6.1.4.1.2011.6.139.11.1.23.1.3OCTET STRING (SIZE(1..256))read-writecurrent
hwAPTrafficProfilePriority80211eUpMapDscp
OBJECT-TYPE
This object indicates the tunnel priority mappings when data packets are sent from APs to an AC. DSCP values range from 0 to 63 and 802.11e priorities range from 0 to 7. Two mapped data are separated by a comma.
1.3.6.1.4.1.2011.6.139.11.1.23.1.4OCTET STRING (SIZE(1..256))read-writecurrent
hwAPTrafficProfileUserIsolate
OBJECT-TYPE
This object indicates the user isolation mode. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.23.1.5INTEGER {disable(1), l3Isolate(2), l2Isolate(3)}read-writecurrent
hwAPTrafficProfileRateLimitClientUp
OBJECT-TYPE
This object indicates the STA's uplink rate limit. The default value is 0xFFFFFFFF. It is expressed in kbit/s.
1.3.6.1.4.1.2011.6.139.11.1.23.1.6Unsigned32 (64..4294967295)read-writecurrent
hwAPTrafficProfileRateLimitClientDn
OBJECT-TYPE
This object indicates the STA's downlink rate limit. The default value is 0xFFFFFFFF. It is expressed in kbit/s.
1.3.6.1.4.1.2011.6.139.11.1.23.1.7Unsigned32 (64..4294967295)read-writecurrent
hwAPTrafficProfileRateLimitVapUp
OBJECT-TYPE
This object indicates the VAP's uplink rate limit. The default value is 0xFFFFFFFF. It is expressed in kbit/s.
1.3.6.1.4.1.2011.6.139.11.1.23.1.8Unsigned32 (64..4294967295)read-writecurrent
hwAPTrafficProfileRateLimitVapDn
OBJECT-TYPE
This object indicates the VAP's downlink rate limit. The default value is 0xFFFFFFFF. It is expressed in kbit/s.
1.3.6.1.4.1.2011.6.139.11.1.23.1.9Unsigned32 (64..4294967295)read-writecurrent
hwAPTrafficProfileMldSnooping
OBJECT-TYPE
This object indicates the status of the MLD snooping function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.23.1.10INTEGER {disable(1), enable(2)}read-writecurrent
hwAPTrafficProfileIGMPSnooping
OBJECT-TYPE
This object indicates the status of the IGMP snooping function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.23.1.11INTEGER {disable(1), enable(2)}read-writecurrent
hwAPTrafficProfileIGMPSnoopingReportSuppress
OBJECT-TYPE
This object indicates the status of the IGMP snooping report suppression function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.23.1.12INTEGER {disable(1), enable(2)}read-writecurrent
hwAPTrafficProfileMcToUc
OBJECT-TYPE
This object indicates the status of the function of converting multicast to unicast. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.23.1.13INTEGER {disable(1), enable(2)}read-writecurrent
hwAPTrafficProfileOptimizeSuppressionBc
OBJECT-TYPE
This object indicates the information about broadcast storm suppression. The unit is pps. The default value is 0xFFFFFFFF, indicating that the broadcast storm suppression is not enabled.
1.3.6.1.4.1.2011.6.139.11.1.23.1.14Unsigned32 (0..14881000 | 4294967295)read-writecurrent
hwAPTrafficProfileOptimizeSuppressionUc
OBJECT-TYPE
This object indicates the information about unknown unicast storm suppression. The unit is pps. The default value is 0xFFFFFFFF, indicating that the broadcast storm suppression is not enabled.
1.3.6.1.4.1.2011.6.139.11.1.23.1.15Unsigned32 (0..14881000 | 4294967295)read-writecurrent
hwAPTrafficProfileOptimizeSuppressionMc
OBJECT-TYPE
This object indicates the information about multicast storm suppression. The unit is pps. The default value is 0xFFFFFFFF, indicating that the broadcast storm suppression is not enabled.
1.3.6.1.4.1.2011.6.139.11.1.23.1.16Unsigned32 (0..14881000 | 4294967295)read-writecurrent
hwAPTrafficProfileOptimizeTCPAdjustMSS
OBJECT-TYPE
This object indicates the information about the automatic MSS adjustment. The default value is 0xFFFFFFFF, indicating that this function is not enabled.
1.3.6.1.4.1.2011.6.139.11.1.23.1.17Unsigned32 (128..2048 | 4294967295)read-writecurrent
hwAPTrafficProfileOptimizeProxyARP
OBJECT-TYPE
This object indicates the status of the ARP proxy function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.23.1.18INTEGER {disable(1), enable(2)}read-writecurrent
hwAPTrafficProfileOptimizeProxyND
OBJECT-TYPE
This object indicates the status of the ND proxy function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.23.1.19INTEGER {disable(1), enable(2)}read-writecurrent
hwAPTrafficProfileOptimizeUcSendARP
OBJECT-TYPE
This object indicates the status of the unicast ARP function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.23.1.20INTEGER {disable(1), enable(2)}read-writecurrent
hwAPTrafficProfileOptimizeUcSendND
OBJECT-TYPE
This object indicates the status of the unicast ND function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.23.1.21INTEGER {disable(1), enable(2)}read-writecurrent
hwAPTrafficProfileOptimizeUcSendDHCP
OBJECT-TYPE
This object indicates the status of the unicast DHCP function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.23.1.22INTEGER {disable(1), enable(2)}read-writecurrent
hwAPTrafficProfileOptimizeBcMcDenyAll
OBJECT-TYPE
After this function is enabled, other multicast packets, except for proxy response packets and multicast packets converted to unicast packets, are discarded. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.23.1.23INTEGER {disable(1), enable(2)}read-writecurrent
hwAPTrafficProfileOptimizeStaBridgeForward
OBJECT-TYPE
This object indicates the status of the STA bridge forwarding function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.23.1.24INTEGER {disable(1), enable(2)}read-writecurrent
hwAPTrafficProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.23.1.25RowStatusread-createcurrent
hwAPTrafficProfilePriorityMapUpTrustMode
OBJECT-TYPE
This object indicates the tunnel priority mapping mode.
1.3.6.1.4.1.2011.6.139.11.1.23.1.26INTEGER {trust80211e(1), trustdscp(2)}read-writecurrent
hwAPTrafficProfilePriorityDscpUpMapDscp
OBJECT-TYPE
This object indicates the mapping relationship between DSCP and DSCP. DSCP values range from 0 to 63. Two mapped data are separated by a comma.
1.3.6.1.4.1.2011.6.139.11.1.23.1.27OCTET STRING (SIZE(1..256))read-writecurrent
hwAPTrafficProfileOptimizeBcMcMismatchAct
OBJECT-TYPE
This object indicates the status of the bcmc unicast send mismacth action function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.23.1.28INTEGER {traverse(1), drop(2)}read-writecurrent
hwAPTrafficProfileMcToUcDynamicAdatptive
OBJECT-TYPE
This object indicates the status of the multicast to unicast dynamic adaptive function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.23.1.29INTEGER {disable(1), enable(2)}read-writecurrent
hwAPTrafficProfileIGMPSnoopingMaxBandwidth
OBJECT-TYPE
This object indicates the status of the IGMP snooping max bandwidth function. The invalid value is 0.
1.3.6.1.4.1.2011.6.139.11.1.23.1.30Unsigned32 (0..10000000)read-writecurrent
hwAPTrafficProfileIGMPSnoopingMaxUser
OBJECT-TYPE
This object indicates the status of the IGMP snooping max user function. The invalid value is 0.
1.3.6.1.4.1.2011.6.139.11.1.23.1.31Unsigned32 (0..1000)read-writecurrent
hwAPTrafficProfilePriorityDscpUpMap8021p
OBJECT-TYPE
This object indicates the mapping relationship between DSCP and 802.1p. DSCP values range from 0 to 63. Two mapped data are separated by a comma.
1.3.6.1.4.1.2011.6.139.11.1.23.1.32OCTET STRING (SIZE(1..256))read-writecurrent
hwAPTrafficProfilePriority80211eUpMap8021p
OBJECT-TYPE
This object indicates the mapping relationship between 802.11e and 802.1p. 802.11e values range from 0 to 7. Two mapped data are separated by a comma.
1.3.6.1.4.1.2011.6.139.11.1.23.1.33OCTET STRING (SIZE(1..256))read-writecurrent
hwAPTrafficProfilePriority8021pDnMap80211e
OBJECT-TYPE
This object indicates the mapping relationship between 802.11e and 802.1p. 802.11e values range from 0 to 7. Two mapped data are separated by a comma.
1.3.6.1.4.1.2011.6.139.11.1.23.1.34OCTET STRING (SIZE(1..256))read-writecurrent
hwAPTrafficProfilePriorityMapUpPayloadTrustMode
OBJECT-TYPE
This object indicates the status of priority-map upstream trust. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.23.1.35INTEGER {trust80211E(1), trustDSCP(2)}read-writecurrent
hwAPTrafficProfileSvpVoice
OBJECT-TYPE
This object indicates the status of the SVP voice function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.23.1.36INTEGER {disable(1), enable(2)}read-writecurrent
hwAPTrafficProfileRateLimitClientDynamic
OBJECT-TYPE
This object indicates the rate limit switch of client. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.23.1.37INTEGER {disable(1), enable(2)}read-writecurrent
hwAPTrafficProfileRateLimitClientDynamicThr
OBJECT-TYPE
This object indicates the limit rate of client. Can only be configed with 8,16,32. The default value is 16. It is expressed in Mbps.
1.3.6.1.4.1.2011.6.139.11.1.23.1.38Unsigned32 (8 | 16 | 32)read-writecurrent
hwAPTrafficProfileFilterTable
OBJECT-TYPE
This table is used to configure QoS filter information.
1.3.6.1.4.1.2011.6.139.11.1.24not-accessiblecurrent
hwAPTrafficProfileFilterEntry
OBJECT-TYPE
The indexes of this table are hwAPTrafficProfileName, hwAPTrafficProfileFilterType, and hwAPTrafficProfileFilterDirection.
1.3.6.1.4.1.2011.6.139.11.1.24.1not-accessiblecurrent
hwAPTrafficProfileFilterDirection
OBJECT-TYPE
This object indicates the ACL rule direction for packet filtering in a traffic profile. This parameter has no default value.
1.3.6.1.4.1.2011.6.139.11.1.24.1.1INTEGER {inbound(1), outbound(2)}not-accessiblecurrent
hwAPTrafficProfileFilterType
OBJECT-TYPE
This object indicates the ACL rule type for packet filtering in a traffic profile. This parameter has no default value.
1.3.6.1.4.1.2011.6.139.11.1.24.1.2INTEGER {ipv4(1), ipv6(2), l2(3)}not-accessiblecurrent
hwAPTrafficProfileFilterACLID
OBJECT-TYPE
This object indicates the ACL rule for packet filtering in a traffic profile.
1.3.6.1.4.1.2011.6.139.11.1.24.1.3Integer32 (3000..3031 | 4000..4031 | 6000..6031)read-writecurrent
hwAPTrafficProfileFilterRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.24.1.4RowStatusread-createcurrent
hwWlanVlanPoolTable
OBJECT-TYPE
This table is used to configure VLAN pools.
1.3.6.1.4.1.2011.6.139.11.1.25not-accessiblecurrent
hwWlanVlanPoolEntry
OBJECT-TYPE
The index of this table is hwVlanPoolName.
1.3.6.1.4.1.2011.6.139.11.1.25.1not-accessiblecurrent
hwVlanPoolName
OBJECT-TYPE
This object indicates the VLAN pool name. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.25.1.1OCTET STRING (SIZE(1..31))not-accessiblecurrent
hwVlanPoolVlanlist
OBJECT-TYPE
This object indicates the VLAN list.
1.3.6.1.4.1.2011.6.139.11.1.25.1.2OCTET STRING (SIZE(0..640))read-writecurrent
hwVlanPoolAssignMethod
OBJECT-TYPE
This object indicates the VLAN pool allocation algorithm. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.25.1.3INTEGER {hash(1), even(2)}read-writecurrent
hwVlanPoolRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.25.1.4RowStatusread-writecurrent
hwWlanStaWhitelistConfig
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.1.26
hwWlanStaWhitelistProfileTable
OBJECT-TYPE
This table is used to create STA whitelist profiles.
1.3.6.1.4.1.2011.6.139.11.1.26.1not-accessiblecurrent
hwWlanStaWhitelistProfileEntry
OBJECT-TYPE
The index of this table is hwWlanStaWhitelistProfileName.
1.3.6.1.4.1.2011.6.139.11.1.26.1.1not-accessiblecurrent
hwWlanStaWhitelistProfileName
OBJECT-TYPE
This object indicates the name of a STA whitelist profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.26.1.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwWlanStaWhitelistProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table.
1.3.6.1.4.1.2011.6.139.11.1.26.1.1.2RowStatusread-writecurrent
hwWlanStaWhitelistProfileConfigTable
OBJECT-TYPE
This table is used to configure STA whitelist profiles.
1.3.6.1.4.1.2011.6.139.11.1.26.2not-accessiblecurrent
hwWlanStaWhitelistProfileConfigEntry
OBJECT-TYPE
The indexes of this table are hwWlanStaWhitelistProfileName and hwWlanStaWhitelistStaMac.
1.3.6.1.4.1.2011.6.139.11.1.26.2.1not-accessiblecurrent
hwWlanStaWhitelistStaMac
OBJECT-TYPE
This object indicates the whitelist.
1.3.6.1.4.1.2011.6.139.11.1.26.2.1.1MacAddressnot-accessiblecurrent
hwWlanStaWhitelistRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.26.2.1.2RowStatusread-writecurrent
hwWlanStaWhitelistStaMacDescription
OBJECT-TYPE
This object indicates the description of the sta-mac.
1.3.6.1.4.1.2011.6.139.11.1.26.2.1.3OCTET STRING (SIZE(0..80))read-writecurrent
hwWlanStaWhitelistProfileOuiTable
OBJECT-TYPE
This table is used to configure OUI of STA whitelist profiles.
1.3.6.1.4.1.2011.6.139.11.1.26.3not-accessiblecurrent
hwWlanStaWhitelistProfileOuiEntry
OBJECT-TYPE
The indexes of this table are hwWlanStaWhitelistProfileName and hwWlanStaWhitelistOui.
1.3.6.1.4.1.2011.6.139.11.1.26.3.1not-accessiblecurrent
hwWlanStaWhitelistOui
OBJECT-TYPE
This object indicates the index of the OUI whitelist in the sta whitelist profile. Its format is XX-XX-XX.XX is a hexadecimal number.
1.3.6.1.4.1.2011.6.139.11.1.26.3.1.1OCTET STRING (SIZE(1..8))not-accessiblecurrent
hwWlanStaWhitelistOuiRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.26.3.1.2RowStatusread-writecurrent
hwWlanStaWhitelistOuiDescription
OBJECT-TYPE
This object indicates the description of the oui.
1.3.6.1.4.1.2011.6.139.11.1.26.3.1.3OCTET STRING (SIZE(0..80))read-writecurrent
hwWlanStaBlacklistConfig
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.1.27
hwWlanStaBlacklistProfileTable
OBJECT-TYPE
This table is used to create STA blacklist profiles.
1.3.6.1.4.1.2011.6.139.11.1.27.1not-accessiblecurrent
hwWlanStaBlacklistProfileEntry
OBJECT-TYPE
The index of this table is hwWlanStaBlacklistProfileName.
1.3.6.1.4.1.2011.6.139.11.1.27.1.1not-accessiblecurrent
hwWlanStaBlacklistProfileName
OBJECT-TYPE
This object indicates the STA blacklist profile name. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.27.1.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwWlanStaBlacklistProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.27.1.1.2RowStatusread-writecurrent
hwWlanStaBlacklistProfileConfigTable
OBJECT-TYPE
This table is used to configure STA blacklist profiles.
1.3.6.1.4.1.2011.6.139.11.1.27.2not-accessiblecurrent
hwWlanStaBlacklistProfileConfigEntry
OBJECT-TYPE
The indexes of this table are hwWlanStaBlacklistProfileName and hwWlanStaBlacklistStaMac.
1.3.6.1.4.1.2011.6.139.11.1.27.2.1not-accessiblecurrent
hwWlanStaBlacklistStaMac
OBJECT-TYPE
This object indicates the blacklist.
1.3.6.1.4.1.2011.6.139.11.1.27.2.1.1MacAddressnot-accessiblecurrent
hwWlanStaBlacklistRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.27.2.1.2RowStatusread-writecurrent
hwWlanStaBlacklistStaMacDescription
OBJECT-TYPE
This object indicates the description of the sta-mac.
1.3.6.1.4.1.2011.6.139.11.1.27.2.1.3OCTET STRING (SIZE(0..80))read-writecurrent
hwWidsProfileTable
OBJECT-TYPE
This table is used to configure WIDS classify profiles, WIDS attack profiles, and WIDS contain profiles.
1.3.6.1.4.1.2011.6.139.11.1.28not-accessiblecurrent
hwWidsProfileEntry
OBJECT-TYPE
The index of this table is hwWidsProfileName.
1.3.6.1.4.1.2011.6.139.11.1.28.1not-accessiblecurrent
hwWidsProfileName
OBJECT-TYPE
This object indicates the name of a WIDS profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.28.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwWidsProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.28.1.5RowStatusread-writeobsolete
hwWidsDeviceReportInterval
OBJECT-TYPE
This object indicates the device detection reporting interval. The default value is 300 seconds. In V200R019C10 and later versions, the value range changes to 60-3600.
1.3.6.1.4.1.2011.6.139.11.1.28.1.6Unsigned32 (10..3600)read-writecurrent
hwWidsDeviceSyncInterval
OBJECT-TYPE
This object indicates the interval for APs to report all device information to an AC. The default value is 360 minutes.
1.3.6.1.4.1.2011.6.139.11.1.28.1.7Unsigned32 (120..360)read-writeobsolete
hwWidsSpoofProfile
OBJECT-TYPE
This object indicates the name of a WIDS spoof profile.
1.3.6.1.4.1.2011.6.139.11.1.28.1.8OCTET STRING (SIZE(0..35))read-writecurrent
hwWidsWhitelistProfile
OBJECT-TYPE
This object indicates the name of a WIDS confident profile.
1.3.6.1.4.1.2011.6.139.11.1.28.1.9OCTET STRING (SIZE(0..35))read-writecurrent
hwWidsBruteForceDetectInterval
OBJECT-TYPE
This object indicates the interval for brute force attack detection. The default value is 60. It is expressed in s.
1.3.6.1.4.1.2011.6.139.11.1.28.1.10Unsigned32 (10..120)read-writecurrent
hwWidsBruteForceDetectThreshold
OBJECT-TYPE
This object indicates the threshold for the number of brute force attack attempts, namely, the threshold for the number of key negotiation failures within a detection period. If the number of brute-force attack attempts exceeds the threshold, the terminal initiates brute force attacks. The default value is 20.
1.3.6.1.4.1.2011.6.139.11.1.28.1.11Unsigned32 (1..100)read-writecurrent
hwWidsBruteForceQuietTime
OBJECT-TYPE
This object indicates the quiet period for brute force attack alarm reporting. The default value is 600 seconds.
1.3.6.1.4.1.2011.6.139.11.1.28.1.12Unsigned32 (60..36000)read-writecurrent
hwWidsFloodDetectInterval
OBJECT-TYPE
This object indicates the flood attack detection interval. The default value is 10. It is expressed in s.
1.3.6.1.4.1.2011.6.139.11.1.28.1.13Unsigned32 (10..120)read-writecurrent
hwWidsFloodDetectThreshold
OBJECT-TYPE
This object indicates the threshold for food attack detection. If the number of packets of the same type received within a detection period exceeds the threshold, flood attacks occur. The default value is 500.
1.3.6.1.4.1.2011.6.139.11.1.28.1.14Unsigned32 (1..1000)read-writecurrent
hwWidsFloodQuietTime
OBJECT-TYPE
This object indicates the quiet period for flood attack alarm reporting. The default value is 600 seconds.
1.3.6.1.4.1.2011.6.139.11.1.28.1.15Unsigned32 (60..36000)read-writecurrent
hwWidsWeakIvQuietTime
OBJECT-TYPE
This object indicates the quiet period for weak IV attack alarm reporting. The default value is 600 seconds.
1.3.6.1.4.1.2011.6.139.11.1.28.1.16Unsigned32 (60..36000)read-writecurrent
hwWidsSpoofQuietTime
OBJECT-TYPE
This object indicates the quiet period for spoofing attack alarm reporting. The default value is 600 seconds.
1.3.6.1.4.1.2011.6.139.11.1.28.1.17Unsigned32 (60..36000)read-writecurrent
hwWidsDynamicBlackListSwitch
OBJECT-TYPE
This object indicates the status of the dynamic blacklist function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.28.1.18INTEGER {disable(1), enable(2)}read-writecurrent
hwWidsRogueContainModeBmp
OBJECT-TYPE
This object indicates the bit map of rogue device countering types. The default value is 0.
1.3.6.1.4.1.2011.6.139.11.1.28.1.19Unsigned32read-writecurrent
hwWidsStaWhitelistProfile
OBJECT-TYPE
This object indicates the name of a sta whitelist profile.
1.3.6.1.4.1.2011.6.139.11.1.28.1.20OCTET STRING (SIZE(0..35))read-writecurrent
hwWidsContainMinRssi
OBJECT-TYPE
This object indicates min Rssi for contain.
1.3.6.1.4.1.2011.6.139.11.1.28.1.21Integer32 (-95..-50 | 0)read-writecurrent
hwWidsContainMinStaNum
OBJECT-TYPE
This object indicates min sta num for contain.
1.3.6.1.4.1.2011.6.139.11.1.28.1.22Unsigned32 (1..10 | 0)read-writecurrent
hwWlanPPSKTable
OBJECT-TYPE
This table is used to add and delete PPSK.
1.3.6.1.4.1.2011.6.139.11.1.29not-accessiblecurrent
hwWlanPPSKEntry
OBJECT-TYPE
The index of this table is hwWlanPPSKUserName
1.3.6.1.4.1.2011.6.139.11.1.29.1not-accessiblecurrent
hwWlanPPSKUserName
OBJECT-TYPE
Ppsk user name
1.3.6.1.4.1.2011.6.139.11.1.29.1.1OCTET STRING (SIZE(1..64))read-writecurrent
hwWlanPPSKPskMode
OBJECT-TYPE
This object indicates the pre-shared key mode of this table.
1.3.6.1.4.1.2011.6.139.11.1.29.1.2INTEGER {passPhrase(1), hex(2)}read-writecurrent
hwWlanPPSKPskValue
OBJECT-TYPE
This object indicates the pre-shared key value of this table.
1.3.6.1.4.1.2011.6.139.11.1.29.1.3OCTET STRING (SIZE(8..108))read-writecurrent
hwWlanPPSKPskUserGroup
OBJECT-TYPE
This object indicates the user group of this table.
1.3.6.1.4.1.2011.6.139.11.1.29.1.4OCTET STRING (SIZE(0..64))read-writecurrent
hwWlanPPSKExpireDate
OBJECT-TYPE
This object indicates the expire date of this table.
1.3.6.1.4.1.2011.6.139.11.1.29.1.5TimeTicksread-writecurrent
hwWlanPPSKExpireHour
OBJECT-TYPE
This object indicates the expire hour of this table.
1.3.6.1.4.1.2011.6.139.11.1.29.1.6Unsigned32 (0..23)read-writecurrent
hwWlanPPSKSsid
OBJECT-TYPE
This object indicates the ssid of this table.
1.3.6.1.4.1.2011.6.139.11.1.29.1.7OCTET STRING (SIZE(1..32))read-writecurrent
hwWlanPPSKMaxDevice
OBJECT-TYPE
This object indicates the max device of this table.
1.3.6.1.4.1.2011.6.139.11.1.29.1.8Unsigned32read-writecurrent
hwWlanPPSKBranchGroup
OBJECT-TYPE
This object indicates the branch group of this table.
1.3.6.1.4.1.2011.6.139.11.1.29.1.9OCTET STRING (SIZE(0..35))read-writecurrent
hwWlanPPSKStaMac
OBJECT-TYPE
This object indicates the station mac-address of this table.
1.3.6.1.4.1.2011.6.139.11.1.29.1.10MacAddressread-writecurrent
hwWlanPPSKVlan
OBJECT-TYPE
This object indicates the vlan of this table.
1.3.6.1.4.1.2011.6.139.11.1.29.1.11Unsigned32 (0..4094)read-writecurrent
hwWlanPPSKRowStatus
OBJECT-TYPE
This object indicates the row status of this table.
1.3.6.1.4.1.2011.6.139.11.1.29.1.12RowStatusread-writecurrent
hwWidsSpoofProfileTable
OBJECT-TYPE
This table is used to configure matching rules for spoof APs.
1.3.6.1.4.1.2011.6.139.11.1.32not-accessiblecurrent
hwWidsSpoofProfileEntry
OBJECT-TYPE
The indexes of this table are hwWidsSpoofProfileName and hwWidsSpoofSsidRegex.
1.3.6.1.4.1.2011.6.139.11.1.32.1not-accessiblecurrent
hwWidsSpoofProfileName
OBJECT-TYPE
This object indicates the name of a WIDS spoof profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.32.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwWidsSpoofSsidRegex
OBJECT-TYPE
This object indicates the matching rules for spoofing SSIDs.
1.3.6.1.4.1.2011.6.139.11.1.32.1.2OCTET STRING (SIZE(1..48))not-accessiblecurrent
hwWidsSpoofProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.32.1.3RowStatusread-writecurrent
hwWidsWhitelistProfileMacTable
OBJECT-TYPE
This table is used to configure WIDS MAC whitelists.
1.3.6.1.4.1.2011.6.139.11.1.33not-accessiblecurrent
hwWidsWhitelistProfileMacEntry
OBJECT-TYPE
The index of this table is hwWidsWhitelistProfileName.
1.3.6.1.4.1.2011.6.139.11.1.33.1not-accessiblecurrent
hwWidsWhitelistProfileName
OBJECT-TYPE
This object indicates the name of a WIDS confident profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.33.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwWidsWhitelistProfileMac
OBJECT-TYPE
This object indicates the MAC address whitelist.
1.3.6.1.4.1.2011.6.139.11.1.33.1.2MacAddressnot-accessiblecurrent
hwWidsWhitelistProfileMacRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.33.1.3RowStatusread-writecurrent
hwWidsWhitelistProfileOuiTable
OBJECT-TYPE
This table is used to configure WIDS OUI whitelists.
1.3.6.1.4.1.2011.6.139.11.1.34not-accessiblecurrent
hwWidsWhitelistProfileOuiEntry
OBJECT-TYPE
The index of this table is hwWidsWhitelistProfileOui.
1.3.6.1.4.1.2011.6.139.11.1.34.1not-accessiblecurrent
hwWidsWhitelistProfileOui
OBJECT-TYPE
This object indicates the index of the OUI whitelist in the WIDS confident profile. Its format is XX-XX-XX. XX is a hexadecimal number.
1.3.6.1.4.1.2011.6.139.11.1.34.1.1OCTET STRING (SIZE(1..8))not-accessiblecurrent
hwWidsWhitelistProfileOuiRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.34.1.2RowStatusread-writecurrent
hwWidsWhitelistProfileSsidTable
OBJECT-TYPE
This table is used to configure WIDS SSID whitelists.
1.3.6.1.4.1.2011.6.139.11.1.35not-accessiblecurrent
hwWidsWhitelistProfileSsidEntry
OBJECT-TYPE
The index of this table is hwWidsWhitelistProfileSsid.
1.3.6.1.4.1.2011.6.139.11.1.35.1not-accessiblecurrent
hwWidsWhitelistProfileSsid
OBJECT-TYPE
This object indicates the trusted SSIDs that are case-sensitive.
1.3.6.1.4.1.2011.6.139.11.1.35.1.1OCTET STRING (SIZE(1..34))not-accessiblecurrent
hwWidsWhitelistProfileSsidRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.35.1.2RowStatusread-writecurrent
hwWlanMeshProfileTable
OBJECT-TYPE
This table is used to configure and query Mesh profile parameters.
1.3.6.1.4.1.2011.6.139.11.1.36not-accessiblecurrent
hwWlanMeshProfileEntry
OBJECT-TYPE
The index of this table is hwWlanMeshProfileName.
1.3.6.1.4.1.2011.6.139.11.1.36.1not-accessiblecurrent
hwWlanMeshProfileName
OBJECT-TYPE
This object indicates the name of a mesh profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.36.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwWlanMeshID
OBJECT-TYPE
This object indicates the mesh ID. The value is a string of case-sensitive characters without question marks (and spaces. It cannot begin or end with double quotation marks. The default value is huaweimesh.
1.3.6.1.4.1.2011.6.139.11.1.36.1.2OCTET STRING (SIZE(1..32))read-writecurrent
hwWlanMeshDhcpTrustPort
OBJECT-TYPE
This object indicates whether to enable the DHCP trusted port on an AP. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.36.1.3INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanMeshLinkReportInterval
OBJECT-TYPE
This object indicates the interval for reporting mesh link information. The default value is 30 seconds.
1.3.6.1.4.1.2011.6.139.11.1.36.1.4Unsigned32 (5..3600)read-writecurrent
hwWlanMeshMaxLinkNum
OBJECT-TYPE
In FWA mode, the maximum number of Mesh links supported is 32,otherwise, it is 8
1.3.6.1.4.1.2011.6.139.11.1.36.1.5Unsigned32 (1..32)read-writecurrent
hwWlanMeshRssiThreshold
OBJECT-TYPE
This object indicates the valid RSSI threshold for a Mesh link route. The default value is -75 dBm.
1.3.6.1.4.1.2011.6.139.11.1.36.1.6Integer32 (-90..-20)read-writecurrent
hwWlanMeshSecurityProfileName
OBJECT-TYPE
The object indicates the bound security profile.
1.3.6.1.4.1.2011.6.139.11.1.36.1.8OCTET STRING (SIZE(1..35))read-writecurrent
hwWlanMeshProfileHandoverProfileName
OBJECT-TYPE
The object indicates the bound handover profile.
1.3.6.1.4.1.2011.6.139.11.1.36.1.9OCTET STRING (SIZE(0..35))read-writecurrent
hwWlanMeshFwaSwitch
OBJECT-TYPE
This object indicates the status of the FWA mode function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.36.1.10INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanMeshFwaEdcaMode
OBJECT-TYPE
This object indicates the EDCA mode in FWA mode. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.36.1.11INTEGER {auto(1), manual(2)}read-writecurrent
hwWlanMeshProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.36.1.12RowStatusread-writecurrent
hwWlanMeshClientEdcaVoiceECWmax
OBJECT-TYPE
This object indicates the exponent form of the maximum contention window (ECWmax) for AC_VO packets. ECWmin and ECWmax determine the average backoff time.
1.3.6.1.4.1.2011.6.139.11.1.36.1.13Unsigned32 (0..15)read-writecurrent
hwWlanMeshClientEdcaVoiceECWmin
OBJECT-TYPE
This object indicates the exponent form of the minimum contention window (ECWmin) for AC_VO packets. ECWmin and ECWmax determine the average backoff time.
1.3.6.1.4.1.2011.6.139.11.1.36.1.14Unsigned32 (0..15)read-writecurrent
hwWlanMeshClientEdcaVoiceAIFSN
OBJECT-TYPE
This object indicates the AIFSN for AC_VO packets, which determines the channel idle time.
1.3.6.1.4.1.2011.6.139.11.1.36.1.15Unsigned32 (1..15)read-writecurrent
hwWlanMeshClientEdcaVoiceTXOPLimit
OBJECT-TYPE
This object indicates the transmission opportunity limit (TXOPLimit) for AC_VO packets, which determines the maximum duration in which an STA can occupy a channel. A larger TXOPLimit value indicates a longer duration to occupy a channel.
1.3.6.1.4.1.2011.6.139.11.1.36.1.16Unsigned32 (0..255)read-writecurrent
hwWlanMeshClientEdcaVideoECWmax
OBJECT-TYPE
This object indicates the exponent form of the maximum contention window (ECWmax) for AC_VI packets. ECWmin and ECWmax determine the average backoff time.
1.3.6.1.4.1.2011.6.139.11.1.36.1.17Unsigned32 (0..15)read-writecurrent
hwWlanMeshClientEdcaVideoECWmin
OBJECT-TYPE
This object indicates the exponent form of the minimum contention window (ECWmin) for AC_VI packets. ECWmin and ECWmax determine the average backoff time.
1.3.6.1.4.1.2011.6.139.11.1.36.1.18Unsigned32 (0..15)read-writecurrent
hwWlanMeshClientEdcaVideoAIFSN
OBJECT-TYPE
This object indicates the AIFSN for AC_VI packets, which determines the channel idle time.
1.3.6.1.4.1.2011.6.139.11.1.36.1.19Unsigned32 (1..15)read-writecurrent
hwWlanMeshClientEdcaVideoTXOPLimit
OBJECT-TYPE
This object indicates the transmission opportunity limit (TXOPLimit) for AC_VI packets, which determines the maximum duration in which an STA can occupy a channel. A larger TXOPLimit value indicates a longer duration to occupy a channel.
1.3.6.1.4.1.2011.6.139.11.1.36.1.20Unsigned32 (0..255)read-writecurrent
hwWlanMeshClientEdcaBeECWmax
OBJECT-TYPE
This object indicates the exponent form of the maximum contention window (ECWmax) for AC_BE packets. ECWmin and ECWmax determine the average backoff time.
1.3.6.1.4.1.2011.6.139.11.1.36.1.21Unsigned32 (0..15)read-writecurrent
hwWlanMeshClientEdcaBeECWmin
OBJECT-TYPE
This object indicates the exponent form of the minimum contention window (ECWmin) for AC_BE packets. ECWmin and ECWmax determine the average backoff time.
1.3.6.1.4.1.2011.6.139.11.1.36.1.22Unsigned32 (0..15)read-writecurrent
hwWlanMeshClientEdcaBeAIFSN
OBJECT-TYPE
This object indicates the AIFSN for AC_BE packets, which determines the channel idle time.
1.3.6.1.4.1.2011.6.139.11.1.36.1.23Unsigned32 (1..15)read-writecurrent
hwWlanMeshClientEdcaBeTXOPLimit
OBJECT-TYPE
This object indicates the transmission opportunity limit (TXOPLimit) for AC_BE packets, which determines the maximum duration in which an STA can occupy a channel. A larger TXOPLimit value indicates a longer duration to occupy a channel.
1.3.6.1.4.1.2011.6.139.11.1.36.1.24Unsigned32 (0..255)read-writecurrent
hwWlanMeshClientEdcaBkECWmax
OBJECT-TYPE
This object indicates the exponent form of the maximum contention window (ECWmax) for AC_BK packets. ECWmin and ECWmax determine the average backoff time.
1.3.6.1.4.1.2011.6.139.11.1.36.1.25Unsigned32 (0..15)read-writecurrent
hwWlanMeshClientEdcaBkECWmin
OBJECT-TYPE
This object indicates the exponent form of the minimum contention window (ECWmin) for AC_BK packets. ECWmin and ECWmax determine the average backoff time.
1.3.6.1.4.1.2011.6.139.11.1.36.1.26Unsigned32 (0..15)read-writecurrent
hwWlanMeshClientEdcaBkAIFSN
OBJECT-TYPE
This object indicates the AIFSN for AC_BK packets, which determines the channel idle time.
1.3.6.1.4.1.2011.6.139.11.1.36.1.27Unsigned32 (1..15)read-writecurrent
hwWlanMeshClientEdcaBkTXOPLimit
OBJECT-TYPE
This object indicates the transmission opportunity limit (TXOPLimit) for AC_BK packets, which determines the maximum duration in which an STA can occupy a channel. A larger TXOPLimit value indicates a longer duration to occupy a channel.
1.3.6.1.4.1.2011.6.139.11.1.36.1.28Unsigned32 (0..255)read-writecurrent
hwWlanMeshNdTrustPort
OBJECT-TYPE
This object indicates whether to enable the ND trusted port on an AP. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.36.1.29INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanMeshLinkAgingTime
OBJECT-TYPE
This object indicates the mesh aging time.
1.3.6.1.4.1.2011.6.139.11.1.36.1.30Unsigned32 (5..60)read-writecurrent
hwWlanMeshProfilePriorityMapTrustMode
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.36.1.31INTEGER {trustDSCP(1), trust8021P(2)}read-writecurrent
hwWlanMeshProfilePriorityDscpMap80211e
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.36.1.32OCTET STRING (SIZE(1..256))read-writecurrent
hwWlanMeshProfileClientModeSwitch
OBJECT-TYPE
This object indicates the status of the Mesh client mode function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.36.1.33INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanMeshProfileBeacon2gRate
OBJECT-TYPE
This object indicates the mesh 2g beacon rate. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.36.1.34INTEGER {one(1), two(2), five(5), six(6), nine(9), eleven(11), twelve(12), eighteen(18), twentyfour(24), thirtysix(36), fortyeight(48), fiftyfour(54)}read-writecurrent
hwWlanMeshProfileBeacon5gRate
OBJECT-TYPE
This object indicates the mesh 5g beacon rate. The default value is 6.
1.3.6.1.4.1.2011.6.139.11.1.36.1.35INTEGER {six(6), nine(9), twelve(12), eighteen(18), twentyfour(24), thirtysix(36), fortyeight(48), fiftyfour(54)}read-writecurrent
hwWlanMeshProfileSwitchProbeInterval
OBJECT-TYPE
This object indicates the mesh profile switch probe interval. The default value is 60.
1.3.6.1.4.1.2011.6.139.11.1.36.1.36Unsigned32 (10..300)read-writecurrent
hwWlanMeshWhitelistProfileTable
OBJECT-TYPE
This table describes the Mesh whitelist profile.
1.3.6.1.4.1.2011.6.139.11.1.37not-accessiblecurrent
hwWlanMeshWhitelistProfileEntry
OBJECT-TYPE
The index of this table is hwWlanMeshWhitelistProfileName.
1.3.6.1.4.1.2011.6.139.11.1.37.1not-accessiblecurrent
hwWlanMeshWhitelistProfileName
OBJECT-TYPE
This object indicates the name of a mesh profile.
1.3.6.1.4.1.2011.6.139.11.1.37.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwWlanMeshWhitelistProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.37.1.2RowStatusread-writecurrent
hwWlanMeshWhitelistProfileConfigTable
OBJECT-TYPE
This table describes Mesh whitelists in the Mesh whitelist profile.
1.3.6.1.4.1.2011.6.139.11.1.38not-accessiblecurrent
hwWlanMeshWhitelistProfileConfigEntry
OBJECT-TYPE
Indexes of this table are hwWlanMeshWhitelistProfileName and hwWlanMeshWhitelistPeerApMac.
1.3.6.1.4.1.2011.6.139.11.1.38.1not-accessiblecurrent
hwWlanMeshWhitelistPeerApMac
OBJECT-TYPE
This object indicates the whitelist.
1.3.6.1.4.1.2011.6.139.11.1.38.1.1MacAddressnot-accessiblecurrent
hwWlanMeshWhitelistRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.38.1.2RowStatusread-writecurrent
hwWlanMeshHandoverProfileTable
OBJECT-TYPE
This table is used to configure and query Mesh handover profile parameters.
1.3.6.1.4.1.2011.6.139.11.1.39not-accessiblecurrent
hwWlanMeshHandoverProfileEntry
OBJECT-TYPE
The index of this table is hwWlanMeshHandoverProfileName.
1.3.6.1.4.1.2011.6.139.11.1.39.1not-accessiblecurrent
hwWlanMeshHandoverProfileName
OBJECT-TYPE
This object indicates the name of a mesh profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.39.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwWlanMeshHOLinkProbeInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.39.1.2Unsigned32 (50..6000)read-writecurrent
hwWlanMeshHOMinRssiThreshold
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.39.1.3Integer32 (-90..-20)read-writecurrent
hwWlanMeshHOMaxRssiThreshold
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.39.1.4Integer32 (-90..0)read-writecurrent
hwWlanMeshHOLinkHoldPeriod
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.39.1.5Unsigned32 (1000..60000)read-writecurrent
hwWlanMeshHORssiMargin
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.39.1.6Unsigned32 (1..70)read-writecurrent
hwWlanMeshHOLocationBasedAlgorithmEnable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.39.1.7INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanMeshHOMovingDirection
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.39.1.8INTEGER {forward(1), backward(2), undetermined(3)}read-writecurrent
hwWlanMeshHOPNCriteriaObserveTime
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.39.1.9Unsigned32 (1..10)read-writecurrent
hwWlanMeshHOPNCriteriaQualifyTime
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.39.1.10Unsigned32 (1..10)read-writecurrent
hwWlanMeshUrgentHandoverLowRateThreshold
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.39.1.11Unsigned32 (1..1300)read-writecurrent
hwWlanMeshUrgentHandoverLowRatePeriod
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.39.1.12Unsigned32 (0..10000)read-writecurrent
hwWlanMeshUrgentHandoverPunishmentPeriod
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.39.1.13Unsigned32 (0..10000)read-writecurrent
hwWlanMeshUrgentHandoverPunishmentRssi
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.39.1.14Unsigned32 (0..50)read-writecurrent
hwWlanMeshHandoverProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.39.1.15RowStatusread-writecurrent
hwWdsProfileTable
OBJECT-TYPE
This table is used to configure and query WDS profile parameters.
1.3.6.1.4.1.2011.6.139.11.1.40not-accessiblecurrent
hwWdsProfileEntry
OBJECT-TYPE
The index of this table is hwWdsProfileName.
1.3.6.1.4.1.2011.6.139.11.1.40.1not-accessiblecurrent
hwWdsProfileName
OBJECT-TYPE
This object indicates the name of a WDS profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.40.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwWdsName
OBJECT-TYPE
This object indicates the WDS identifier. The value is a string of case-sensitive characters without question marks and spaces. It cannot begin or end with double quotation marks. The default value is huaweiwds.
1.3.6.1.4.1.2011.6.139.11.1.40.1.2OCTET STRING (SIZE(1..32))read-writecurrent
hwWdsMode
OBJECT-TYPE
This object indicates the mode of the WDS. The default value is 3.
1.3.6.1.4.1.2011.6.139.11.1.40.1.3INTEGER {middle(1), root(2), leaf(3)}read-writecurrent
hwWdsDhcpTrustPort
OBJECT-TYPE
This object indicates whether to enable the DHCP trusted port on an AP. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.40.1.4INTEGER {disable(1), enable(2)}read-writecurrent
hwWdsVlanTagged
OBJECT-TYPE
This object indicates the tagged VLAN in a bridge profile. It is used to add one or a group of VLANs to the WDS bridge profile in tagged mode. By default, no VLAN is configured in the WDS bridge profile.
1.3.6.1.4.1.2011.6.139.11.1.40.1.5OCTET STRINGread-writecurrent
hwWdsSecurityProfileName
OBJECT-TYPE
The object indicates the bound security profile.
1.3.6.1.4.1.2011.6.139.11.1.40.1.6OCTET STRING (SIZE(1..35))read-writecurrent
hwWdsProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.ROWSTATUS_UNDEFINED: undefined ROWSTATUS_ACTIVE: active ROWSTATUS_NOTINSERVICE: notInService ROWSTATUS_NOTREADY: notReady ROWSTATUS_CREATEANDFLOW: createAndGoROWSTATUS_CREATEANDWAIT: createAndWaitROWSTATUS_DESTROY: destroy
1.3.6.1.4.1.2011.6.139.11.1.40.1.8RowStatusread-writecurrent
hwWdsNdTrustPort
OBJECT-TYPE
This object indicates whether to enable the ND trusted port on an AP. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.40.1.9INTEGER {disable(1), enable(2)}read-writecurrent
hwWdsProfilePriorityMapTrustMode
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.40.1.10INTEGER {trustDSCP(1), trust8021P(2)}read-writecurrent
hwWdsProfilePriorityDscpMap80211e
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.40.1.11OCTET STRING (SIZE(1..256))read-writecurrent
hwWdsMuMIMOSwitch
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.40.1.12INTEGER {disable(1), enable(2)}read-writecurrent
hwWdsProfileBeacon2gRate
OBJECT-TYPE
This object indicates the wds 2g beacon rate. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.40.1.13INTEGER {one(1), two(2), five(5), six(6), nine(9), eleven(11), twelve(12), eighteen(18), twentyfour(24), thirtysix(36), fortyeight(48), fiftyfour(54)}read-writecurrent
hwWdsProfileBeacon5gRate
OBJECT-TYPE
This object indicates the wds 5g beacon rate. The default value is 6.
1.3.6.1.4.1.2011.6.139.11.1.40.1.14INTEGER {six(6), nine(9), twelve(12), eighteen(18), twentyfour(24), thirtysix(36), fortyeight(48), fiftyfour(54)}read-writecurrent
hwWdsWhitelistProfileTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.41not-accessiblecurrent
hwWdsWhitelistProfileEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.41.1not-accessiblecurrent
hwWdsWhitelistProfileName
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.41.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwWdsWhitelistProfileRowStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.41.1.2RowStatusread-writecurrent
hwWdsWhitelistTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.42not-accessiblecurrent
hwWdsWhitelistEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.42.1not-accessiblecurrent
hwWdsWhitelistPeerApMac
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.42.1.1MacAddressnot-accessiblecurrent
hwWdsWhitelistRowStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.42.1.2RowStatusread-writecurrent
hwLocationProfileTable
OBJECT-TYPE
This table is used to configure terminal location and tag location.
1.3.6.1.4.1.2011.6.139.11.1.43not-accessiblecurrent
hwLocationProfileEntry
OBJECT-TYPE
The index of this table is hwLocationProfileName.
1.3.6.1.4.1.2011.6.139.11.1.43.1not-accessiblecurrent
hwLocationProfileName
OBJECT-TYPE
This object indicates the name of a location profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.43.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwLocationAeroscoutTagSwitch
OBJECT-TYPE
This object indicates the status of the AeroScout tag location function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.43.1.2INTEGER {disable(1), enable(2)}read-writecurrent
hwLocationAeroscoutMuSwitch
OBJECT-TYPE
This object indicates the status of the AeroScout MU location function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.43.1.3INTEGER {disable(1), enable(2)}read-writecurrent
hwLocationAeroscoutServerPort
OBJECT-TYPE
This object indicates the port used by APs or ACs to report AeroScout location data to the AE server.
1.3.6.1.4.1.2011.6.139.11.1.43.1.4Unsigned32 (0 | 1025..65535)read-writecurrent
hwLocationAeroscoutViaACSwitch
OBJECT-TYPE
This object indicates whether AeroScout tag location data is reported to the AC. This parameter has no default value.
1.3.6.1.4.1.2011.6.139.11.1.43.1.5INTEGER {disable(1), enable(2)}read-writecurrent
hwLocationAeroscoutViaACPort
OBJECT-TYPE
This object indicates that AeroScout location data is reported to the AC that forwards the data to the AE. A port is configured for the AP to report location data to the AC. The value ranges from 1025 to 65535. The value 0 indicates ViaACSwitch is disable.
1.3.6.1.4.1.2011.6.139.11.1.43.1.6Unsigned32read-writecurrent
hwLocationAeroscoutCompoundTime
OBJECT-TYPE
This object indicates the AerosScout location data compound time. The value 0 indicates that data is not compounded and the AP reports location data in real time. The default value is 65535 and the unit is 0.1s.
1.3.6.1.4.1.2011.6.139.11.1.43.1.7Unsigned32 (0..65535)read-writecurrent
hwLocationEkahauTagEnable
OBJECT-TYPE
This object indicates the status of the Ekahau tag location function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.43.1.8INTEGER {disable(1), enable(2)}read-writecurrent
hwLocationEkahauServerIPAddress
OBJECT-TYPE
This object indicates the IP address of the location server for Ekahau tag location.
1.3.6.1.4.1.2011.6.139.11.1.43.1.9IpAddressread-writecurrent
hwLocationEkahauServerIPv6Address
OBJECT-TYPE
This object indicates the IPv6 address of the location server for Ekahau tag location.
1.3.6.1.4.1.2011.6.139.11.1.43.1.10OCTET STRINGread-writecurrent
hwLocationEkahauServerPort
OBJECT-TYPE
This object indicates the port number of the location server for Ekahau tag location.
1.3.6.1.4.1.2011.6.139.11.1.43.1.11Unsigned32 (0 | 1025..65535)read-writecurrent
hwLocationEkahauViaACEnable
OBJECT-TYPE
This object indicates whether Ekahau tag location data is reported to the AC.
1.3.6.1.4.1.2011.6.139.11.1.43.1.12INTEGER {disable(1), enable(2)}read-writecurrent
hwLocationEkahauViaACPort
OBJECT-TYPE
This object indicates that Ekahau location data is reported to the AC that forwards the data to the AE. A port is configured for the AP to report location data to the AC.
1.3.6.1.4.1.2011.6.139.11.1.43.1.13Unsigned32 (0 | 1025..65535)read-writecurrent
hwLocationSourceIPAddress
OBJECT-TYPE
This object indicates the source IPv4 address for reporting location data in AeroScout or Ekahau location mode. You choose an IPv4 or IPv6 address.
1.3.6.1.4.1.2011.6.139.11.1.43.1.14IpAddressread-writecurrent
hwLocationSourceIPv6Address
OBJECT-TYPE
This object indicates the source IPv6 address for reporting location data in AeroScout or Ekahau location mode. You choose an IPv4 or IPv6 address.
1.3.6.1.4.1.2011.6.139.11.1.43.1.15OCTET STRINGread-writecurrent
hwLocationPrivateMuEnable
OBJECT-TYPE
This object indicates the status of the Huawei proprietary terminal location function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.43.1.16INTEGER {disable(1), enable(2)}read-writecurrent
hwLocationPrivateServerIPAddress
OBJECT-TYPE
This object indicates the IP address of the server for the Huawei proprietary location function.
1.3.6.1.4.1.2011.6.139.11.1.43.1.17IpAddressread-writecurrent
hwLocationPrivateServerIPv6Address
OBJECT-TYPE
This object indicates the IPv6 address of the server for the Huawei proprietary location function.
1.3.6.1.4.1.2011.6.139.11.1.43.1.18OCTET STRINGread-writecurrent
hwLocationPrivateServerPort
OBJECT-TYPE
This object indicates the port number of the server for the Huawei proprietary location function.
1.3.6.1.4.1.2011.6.139.11.1.43.1.19Unsigned32 (0..65535)read-writecurrent
hwLocationPrivateViaACEnable
OBJECT-TYPE
This object indicates whether Huawei proprietary terminal location data is reported to the AC. The default value is 2.1: Enable2: Disable
1.3.6.1.4.1.2011.6.139.11.1.43.1.20INTEGER {disable(1), enable(2)}read-writecurrent
hwLocationPrivateViaACPort
OBJECT-TYPE
This object indicates that Huawei proprietary terminal location data is reported to the AC that forwards the data to the location server. A port is configured for the AP to report location data to the AC. The default destination IP address and port number to which the AP reports terminal location data is the AC's IP address and 6411 respectively.
1.3.6.1.4.1.2011.6.139.11.1.43.1.21Unsigned32 (0 | 5000..65535)read-writecurrent
hwLocationPrivateReportFrequency
OBJECT-TYPE
This object indicates the interval for the AP to report location data in Huawei proprietary terminal location mode. The default value is 20000 ms.
1.3.6.1.4.1.2011.6.139.11.1.43.1.22Unsigned32 (500..60000)read-writecurrent
hwLocationProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.ROWSTATUS_UNDEFINED: undefinedROWSTATUS_ACTIVE: activeROWSTATUS_NOTINSERVICE: notInServiceROWSTATUS_NOTREADY: notReadyROWSTATUS_CREATEANDFLOW: createAndGoROWSTATUS_CREATEANDWAIT: createAndWaitROWSTATUS_DESTROY: destroy
1.3.6.1.4.1.2011.6.139.11.1.43.1.23RowStatusread-writecurrent
hwLocationProfileAeroscoutShareKey
OBJECT-TYPE
This object indicates the sharekey of the aeroscout server.
1.3.6.1.4.1.2011.6.139.11.1.43.1.24OCTET STRING (SIZE(0 | 6..68))read-writecurrent
hwLocationPaiboMuEnable
OBJECT-TYPE
This object indicates whether Paibo terminal location data is reported to the AC. The default value is 1.1: Disable2: Enable
1.3.6.1.4.1.2011.6.139.11.1.43.1.25INTEGER {disable(1), enable(2)}read-writecurrent
hwLocationPaiboReportFrequency
OBJECT-TYPE
This object indicates the interval for the AP to report location data in Paibo terminal location mode. The default value is 60000 ms.
1.3.6.1.4.1.2011.6.139.11.1.43.1.26Unsigned32 (500..600000)read-writecurrent
hwLocationPaiboServerIPAddress
OBJECT-TYPE
This object indicates the IP address of the server for the Paibo location function.
1.3.6.1.4.1.2011.6.139.11.1.43.1.27IpAddressread-writecurrent
hwLocationPaiboServerIPv6Address
OBJECT-TYPE
This object indicates the IPv6 address of the server for the Paibo location function.
1.3.6.1.4.1.2011.6.139.11.1.43.1.28OCTET STRINGread-writecurrent
hwLocationPaiboServerPort
OBJECT-TYPE
This object indicates the port number of the server for the Paibo location function.
1.3.6.1.4.1.2011.6.139.11.1.43.1.29Unsigned32 (0..65535)read-writecurrent
hwLocationPaiboViaACPort
OBJECT-TYPE
This object indicates the port number of the server for the Paibo location function.
1.3.6.1.4.1.2011.6.139.11.1.43.1.30Unsigned32 (0 | 5000..65535)read-writecurrent
hwLocationPaiboPSK
OBJECT-TYPE
This object indicates the psk of paibo server.
1.3.6.1.4.1.2011.6.139.11.1.43.1.31OCTET STRING (SIZE(6..68))read-writecurrent
hwLocationPaiboIV
OBJECT-TYPE
This object indicates the iv of paibo server.
1.3.6.1.4.1.2011.6.139.11.1.43.1.32OCTET STRING (SIZE(6..68))read-writecurrent
hwLocationPrivateMUVersion
OBJECT-TYPE
This object indicates the protocol version of the Huawei proprietary terminal location function. The default value is v3.
1.3.6.1.4.1.2011.6.139.11.1.43.1.33OCTET STRING (SIZE(0..2))read-writecurrent
hwLocationPrivateServerAddressDomain
OBJECT-TYPE
This object indicates the domain of the server for the Huawei proprietary location function.
1.3.6.1.4.1.2011.6.139.11.1.43.1.34OCTET STRING (SIZE(0..255))read-writecurrent
hwLocationPrivateProtocol
OBJECT-TYPE
This object indicates the report protocol for the Huawei proprietary location function. The default value is 1. The Value of https(2) is not support since V200R019C10.
1.3.6.1.4.1.2011.6.139.11.1.43.1.35INTEGER {udp(1), https(2), http(3), htttp2(4)}read-writecurrent
hwLocationPrivateSSLPolicyName
OBJECT-TYPE
This object indicates the ssl policy name for the Huawei proprietary location function.
1.3.6.1.4.1.2011.6.139.11.1.43.1.36OCTET STRING (SIZE(0..31))read-writecurrent
hwLocationSurFilterMuEnable
OBJECT-TYPE
This object indicates whether Surfilter terminal location data is reported to the AC. The default value is 1. 1: Disable 2: Enable
1.3.6.1.4.1.2011.6.139.11.1.43.1.37INTEGER {disable(1), enable(2)}read-writecurrent
hwLocationSurFilterReportFrequency
OBJECT-TYPE
This object indicates the protoc for the AP to report location data in Surfilter terminal location mode. The default value is 60000 ms.
1.3.6.1.4.1.2011.6.139.11.1.43.1.38Unsigned32 (500..600000)read-writecurrent
hwLocationSurFilterReportProtocol
OBJECT-TYPE
This object indicates the protocol using for the AP to report location data in Surfilter terminal location mode. The default protocol is sftp.
1.3.6.1.4.1.2011.6.139.11.1.43.1.39INTEGER {sftp(1), ftp(2)}read-writecurrent
hwLocationSurFilterServerIPAddress
OBJECT-TYPE
This object indicates the IP address of the server for the Surfilter location function.
1.3.6.1.4.1.2011.6.139.11.1.43.1.40IpAddressread-writecurrent
hwLocationSurFilterServerPort
OBJECT-TYPE
This object indicates the port number of the server for the Surfilter location function.
1.3.6.1.4.1.2011.6.139.11.1.43.1.41Unsigned32 (1..65535)read-writecurrent
hwLocationSurFilterViaACPort
OBJECT-TYPE
This object indicates the port number of the server for the Surfilter location function.
1.3.6.1.4.1.2011.6.139.11.1.43.1.42Unsigned32 (0 | 5000..65535)read-writecurrent
hwLocationSurFilterUserName
OBJECT-TYPE
This object indicates the user name of the server for the Surfilter location function.
1.3.6.1.4.1.2011.6.139.11.1.43.1.43OCTET STRING (SIZE(0..31))read-writecurrent
hwLocationSurFilterPassword
OBJECT-TYPE
This object indicates the password of the server for the Surfilter location function.
1.3.6.1.4.1.2011.6.139.11.1.43.1.44OCTET STRING (SIZE(0..188))read-writecurrent
hwLocationSurFilterDataSourceID
OBJECT-TYPE
This object indicates the data source ID of the server for the Surfilter location function.
1.3.6.1.4.1.2011.6.139.11.1.43.1.45OCTET STRING (SIZE(0 | 6))read-writecurrent
hwLocationSurFilterCompress
OBJECT-TYPE
This object indicates whether the Surfilter terminal location data reported to the AC is compressed. The default value is 1. 1: Compress 2: Uncompress
1.3.6.1.4.1.2011.6.139.11.1.43.1.46INTEGER {compress(1), uncompress(2)}read-writecurrent
hwLocationCollectLocationDataSwitch
OBJECT-TYPE
This object indicates whether collect location data enable. The default value is 1.1: Disable2: Enable
1.3.6.1.4.1.2011.6.139.11.1.43.1.47INTEGER {disable(1), enable(2)}read-writecurrent
hwLocationCollectLocationDataRSSIThreshold
OBJECT-TYPE
This object indicates the collect location data rssi threshold. The default value is -75
1.3.6.1.4.1.2011.6.139.11.1.43.1.48Integer32 (-95..0)read-writecurrent
hwHotspot2ProfileTable
OBJECT-TYPE
This table is used to configure and query Hotspot2.0 profile parameters.
1.3.6.1.4.1.2011.6.139.11.1.45not-accessiblecurrent
hwHotspot2ProfileEntry
OBJECT-TYPE
The index of this table is hwHotspot2ProfileName.
1.3.6.1.4.1.2011.6.139.11.1.45.1not-accessiblecurrent
hwHotspot2ProfileName
OBJECT-TYPE
This object indicates the name of a Hotspot2.0 profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.45.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwHotspot2NetworkType
OBJECT-TYPE
This object indicates that the network type is an interworking information element. This configuration is mandatory. The AP adds this information to Beacon and Probe Response packets, which indicates network types, to assist users in discovering and selecting networks. The default value is 15.0: Private-network1: private-guest2: public-chargeable3: public-free4: personal-device5: emergency-service14: Test15: Wildcard
1.3.6.1.4.1.2011.6.139.11.1.45.1.2Unsigned32 (0..1 | 2..3 | 4..5 | 14..15)read-writecurrent
hwHotspot2InternetAccess
OBJECT-TYPE
This object indicates that the Internet attribute is an interworking information element. This configuration is mandatory. The AP adds this information to Beacon and Probe Response packets, which indicates whether users are allowed to access the Internet, to assist users in discovering and selecting networks. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.45.1.3INTEGER {allowAcess(1), unallowedAcess(2)}read-writecurrent
hwHotspot2VenueGroupCode
OBJECT-TYPE
For details, see Table 7-25m-Venue Group codes and descriptions in the 802.11u protocol. The default value 0xFFFFFFFF indicates that no configuration is added.
1.3.6.1.4.1.2011.6.139.11.1.45.1.4Unsigned32 (0..255 | 4294967295)read-writecurrent
hwHotspot2VenueTypeCode
OBJECT-TYPE
For details, see Table 7-25n-Venue Type assignments in the 802.11u protocol. The default value 0xFFFFFFFF indicates that no configuration is added.
1.3.6.1.4.1.2011.6.139.11.1.45.1.5Unsigned32 (0..255 | 4294967295)read-writecurrent
hwHotspot2Hessid
OBJECT-TYPE
This object indicates the HESSID of a hot spot network. The default value is null, indicating that no configuration is added.
1.3.6.1.4.1.2011.6.139.11.1.45.1.6MacAddressread-writecurrent
hwHotspot2IPv4AddressAvail
OBJECT-TYPE
This object indicates available types of IPv4 addresses. 8 to 63 are reserved. The default value 0xFFFFFFFF indicates that no configuration is added.0: Address type not available.1: Public IPv4 address available,2: Port-restricted IPv4 address available,3: Single NATed private IPv4 address available,4: Double NATed private IPv4 address available,5: Port-restricted IPv4 address and single NATed IPv4 address available,6: Port-restricted IPv4 address and double NATed IPv4 address available,7: Availability of the address type is not known,8 to 63: Reserved
1.3.6.1.4.1.2011.6.139.11.1.45.1.7Unsigned32 (0..7 | 4294967295)read-writecurrent
hwHotspot2IPv6AddressAvail
OBJECT-TYPE
This object indicates available types of IPv4 addresses. 3 is reserved. The default value 0xFFFFFFFF indicates that no configuration is added.0: Address type not available1: Address type available2: Availability of the address type not known3: Reserved
1.3.6.1.4.1.2011.6.139.11.1.45.1.8Unsigned32 (0..2 | 4294967295)read-writecurrent
hwHotspot2NetworkAuthenType
OBJECT-TYPE
This object indicates the network authentication type. 4 to 255 are reserved. The default value 0xFFFFFFFF indicates that no configuration is added.0: Acceptance of terms and conditions.1: On-line enrollment supported,2: http/https redirection,3: DNS redirection,4 to 255: Reserved
1.3.6.1.4.1.2011.6.139.11.1.45.1.9Unsigned32 (0..3 | 4294967295)read-writecurrent
hwHotspot2RedirectUrl
OBJECT-TYPE
This object indicates the redirection URL.This parameter is optional when Network Authentication Type is set to acceptance.This parameter is mandatory when Network Authentication Type is set to http-https-redirection.This parameter is not configurable when Network Authentication Type is set to other values.
1.3.6.1.4.1.2011.6.139.11.1.45.1.10OCTET STRING (SIZE(0..255))read-writecurrent
hwHotspot2CarryP2PCrossConnectInfo
OBJECT-TYPE
This object indicates whether hot spot networks allow P2P devices to set up cross connections. Currently, this function is supported. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.45.1.11INTEGER {disable(1), enable(2)}read-writecurrent
hwHotspot2CellularNetworkProfile
OBJECT-TYPE
This object indicates the bound cellular network profile. By default, no cellular network profile is bound.
1.3.6.1.4.1.2011.6.139.11.1.45.1.12OCTET STRING (SIZE(0..35))read-writecurrent
hwHotspot2ConnectionCapabilityProfile
OBJECT-TYPE
This object indicates the bound connection capability profile. By default, no connection capability profile is bound.
1.3.6.1.4.1.2011.6.139.11.1.45.1.13OCTET STRING (SIZE(0..35))read-writecurrent
hwHotspot2OperatorNameProfile
OBJECT-TYPE
This object indicates the bound operator name profile. By default, no operator name profile is bound.
1.3.6.1.4.1.2011.6.139.11.1.45.1.14OCTET STRING (SIZE(0..35))read-writecurrent
hwHotspot2OperatingClassProfile
OBJECT-TYPE
This object indicates the bound operating class profile. By default, no operating class profile is bound.
1.3.6.1.4.1.2011.6.139.11.1.45.1.15OCTET STRING (SIZE(0..35))read-writecurrent
hwHotspot2OperatorDomainProfile
OBJECT-TYPE
This object indicates the bound operator domain profile. By default, no operator domain profile is bound.
1.3.6.1.4.1.2011.6.139.11.1.45.1.16OCTET STRING (SIZE(0..35))read-writecurrent
hwHotspot2NaiRealmProfile
OBJECT-TYPE
This object indicates the bound NAI realm profile. By default, no NAI realm profile is bound.
1.3.6.1.4.1.2011.6.139.11.1.45.1.17OCTET STRING (SIZE(0..35))read-writecurrent
hwHotspot2VenueNameProfile
OBJECT-TYPE
This object indicates the bound venue name profile. By default, no venue name profile is bound.
1.3.6.1.4.1.2011.6.139.11.1.45.1.18OCTET STRING (SIZE(0..35))read-writecurrent
hwHotspot2RoamingConsortiumProfile
OBJECT-TYPE
This object indicates the bound roaming consortium profile. By default, no roaming consortium profile is bound.
1.3.6.1.4.1.2011.6.139.11.1.45.1.19OCTET STRING (SIZE(0..35))read-writecurrent
hwHotspot2ProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.ROWSTATUS_UNDEFINED: undefinedROWSTATUS_ACTIVE: activeROWSTATUS_NOTINSERVICE: notInServiceROWSTATUS_NOTREADY: notReadyROWSTATUS_CREATEANDFLOW: createAndGoROWSTATUS_CREATEANDWAIT: createAndWaitROWSTATUS_DESTROY: destroy
1.3.6.1.4.1.2011.6.139.11.1.45.1.20RowStatusread-writecurrent
hwCellularNetworkProfileTable
OBJECT-TYPE
This table is used to configure and query cellular network profile parameters.
1.3.6.1.4.1.2011.6.139.11.1.46not-accessiblecurrent
hwCellularNetworkProfileEntry
OBJECT-TYPE
The index of this table is hwCellularNetworkProfileName.
1.3.6.1.4.1.2011.6.139.11.1.46.1not-accessiblecurrent
hwCellularNetworkProfileName
OBJECT-TYPE
This object indicates the name of a cellular network profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.46.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwCellularNetworkProfilePlmnIDList
OBJECT-TYPE
NOTE By default, no configuration is added.PLMNs are separated by question marks (?).A maximum of 32 PLMNs can be configured.A PLMN is a 5-digit or 6-digit numeric string.
1.3.6.1.4.1.2011.6.139.11.1.46.1.2OCTET STRING (SIZE(0..255))read-writecurrent
hwCellularNetworkProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.46.1.3RowStatusread-writecurrent
hwConnectionCapabilityProfileTable
OBJECT-TYPE
This table is used to configure and query connection capability profile parameters.
1.3.6.1.4.1.2011.6.139.11.1.47not-accessiblecurrent
hwConnectionCapabilityProfileEntry
OBJECT-TYPE
The index of this table is hwConnectionCapabilityProfileName.
1.3.6.1.4.1.2011.6.139.11.1.47.1not-accessiblecurrent
hwConnectionCapabilityProfileName
OBJECT-TYPE
This object indicates the name of a connection capability profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.47.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwConnectionCapabilityEsp
OBJECT-TYPE
This object indicates whether ESP is supported. The default value is unknown(1).
1.3.6.1.4.1.2011.6.139.11.1.47.1.2INTEGER {unknown(1), on(2), off(3)}read-writecurrent
hwConnectionCapabilityIcmp
OBJECT-TYPE
This object indicates whether ICMP is supported. The default value is unknown(1).
1.3.6.1.4.1.2011.6.139.11.1.47.1.3INTEGER {unknown(1), on(2), off(3)}read-writecurrent
hwConnectionCapabilityTcpFtp
OBJECT-TYPE
This object indicates whether FTP(TCP) is supported. The default value is unknown(1).
1.3.6.1.4.1.2011.6.139.11.1.47.1.4INTEGER {unknown(1), on(2), off(3)}read-writecurrent
hwConnectionCapabilityTcpHttp
OBJECT-TYPE
This object indicates whether HTTP (port 80) is supported. The default value is unknown(1).
1.3.6.1.4.1.2011.6.139.11.1.47.1.5INTEGER {unknown(1), on(2), off(3)}read-writecurrent
hwConnectionCapabilityTcpPptpVpn
OBJECT-TYPE
This object indicates whether PPTP for VPN services (port 1723) is supported. The default value is unknown(1).
1.3.6.1.4.1.2011.6.139.11.1.47.1.6INTEGER {unknown(1), on(2), off(3)}read-writecurrent
hwConnectionCapabilityTcpSsh
OBJECT-TYPE
This object indicates whether SSH is supported. The default value is unknown(1).
1.3.6.1.4.1.2011.6.139.11.1.47.1.7INTEGER {unknown(1), on(2), off(3)}read-writecurrent
hwConnectionCapabilityTcpTlsVpn
OBJECT-TYPE
This object indicates whether TLS VPN (port 443) is supported. The default value is unknown(1).
1.3.6.1.4.1.2011.6.139.11.1.47.1.8INTEGER {unknown(1), on(2), off(3)}read-writecurrent
hwConnectionCapabilityTcpVoip
OBJECT-TYPE
This object indicates whether VoIP (port 5060) is supported. The default value is unknown(1).
1.3.6.1.4.1.2011.6.139.11.1.47.1.9INTEGER {unknown(1), on(2), off(3)}read-writecurrent
hwConnectionCapabilityUdpIke2Port4500
OBJECT-TYPE
This object indicates whether IKEv2 (port 4500) is supported. The default value is unknown(1).
1.3.6.1.4.1.2011.6.139.11.1.47.1.10INTEGER {unknown(1), on(2), off(3)}read-writecurrent
hwConnectionCapabilityUdpIke2Port500
OBJECT-TYPE
This object indicates whether IKEv2 (port 500) is supported. The default value is unknown(1).
1.3.6.1.4.1.2011.6.139.11.1.47.1.11INTEGER {unknown(1), on(2), off(3)}read-writecurrent
hwConnectionCapabilityUdpVoip
OBJECT-TYPE
This object indicates whether VoIP (port 5060) is supported. The default value is unknown(1).
1.3.6.1.4.1.2011.6.139.11.1.47.1.12INTEGER {unknown(1), on(2), off(3)}read-writecurrent
hwConnectionCapabilityProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.47.1.13RowStatusread-writecurrent
hwOperatorNameProfileTable
OBJECT-TYPE
This table is used to configure and query operator name profile parameters.
1.3.6.1.4.1.2011.6.139.11.1.48not-accessiblecurrent
hwOperatorNameProfileEntry
OBJECT-TYPE
The index of this table is hwOperatorNameProfileName.
1.3.6.1.4.1.2011.6.139.11.1.48.1not-accessiblecurrent
hwOperatorNameProfileName
OBJECT-TYPE
This object indicates the name of an operator name profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.48.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwOperatorNameLanguageCodeList
OBJECT-TYPE
A value of LanguageCode indicates a language. It is a string of 2-3 characters. chi/zho/zh indicates Chinese and eng/en indicates English. NOTE By default, no configuration is added.Values of LanguageCode are separated by question marks (?).A maximum of 32 LanguageCode values can be configured.A LanguageCode value must match a FriendlyName value.
1.3.6.1.4.1.2011.6.139.11.1.48.1.2OCTET STRING (SIZE(0..256))read-writecurrent
hwOperatorFriendlyNameList
OBJECT-TYPE
NOTE By default, no configuration is added.A FriendlyName value is a string of 1-32 characters. FriendlyName values are separated by question marks (?).A maximum of 32 FriendlyName values can be configured.A LanguageCode value must match a FriendlyName value.
1.3.6.1.4.1.2011.6.139.11.1.48.1.3OCTET STRING (SIZE(0..2048))read-writecurrent
hwOperatorNameProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.48.1.4RowStatusread-writecurrent
hwOperatorClassProfileTable
OBJECT-TYPE
This table is used to configure operating class profile parameters.
1.3.6.1.4.1.2011.6.139.11.1.49not-accessiblecurrent
hwOperatorClassProfileEntry
OBJECT-TYPE
The index of this table is hwOperatorClassProfileName.
1.3.6.1.4.1.2011.6.139.11.1.49.1not-accessiblecurrent
hwOperatorClassProfileName
OBJECT-TYPE
This object indicates the name of an operating class profile profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.49.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwOperatorClassIndicationList
OBJECT-TYPE
NOTE By default, no configuration is added.A value of OperatorClassIndication is an integer that ranges from 1 to 255.A maximum of 32 OperatorClassIndication values can be configured.
1.3.6.1.4.1.2011.6.139.11.1.49.1.2OCTET STRING (SIZE(0..256))read-writecurrent
hwOperatorClassProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.49.1.3RowStatusread-writecurrent
hwOperatorDomainNameProfileTable
OBJECT-TYPE
This table is used to configure and query operator domain profile parameters.
1.3.6.1.4.1.2011.6.139.11.1.50not-accessiblecurrent
hwOperatorDomainNameProfileEntry
OBJECT-TYPE
The index of this table is hwOperatorDomainNameProfileName.
1.3.6.1.4.1.2011.6.139.11.1.50.1not-accessiblecurrent
hwOperatorDomainNameProfileName
OBJECT-TYPE
This object indicates the name of an operating class profile profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.50.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwOperatorDomainNameList
OBJECT-TYPE
NOTE By default, no configuration is added.A DomainName value is a string of 1-64 characters in compliance with RFC1035.DomainName values are separated by question marks (?).A maximum of 32 DomainName values can be configured.
1.3.6.1.4.1.2011.6.139.11.1.50.1.2OCTET STRING (SIZE(0..2048))read-writecurrent
hwOperatorDomainNameProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.50.1.3RowStatusread-writecurrent
hwNAIRealmProfileTable
OBJECT-TYPE
This table is used to configure and query NAI realm profile parameters.
1.3.6.1.4.1.2011.6.139.11.1.51not-accessiblecurrent
hwNAIRealmProfileEntry
OBJECT-TYPE
Indexes of this table are hwNAIRealmProfileName, hwNAIRealmName, hwNAIRealmEapMethodType, and hwNAIRealmEapAuthenID.
1.3.6.1.4.1.2011.6.139.11.1.51.1not-accessiblecurrent
hwNAIRealmProfileName
OBJECT-TYPE
This object indicates the name of a NAI realm profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.51.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwNAIRealmName
OBJECT-TYPE
This object indicates a network identifier.
1.3.6.1.4.1.2011.6.139.11.1.51.1.2OCTET STRING (SIZE(0..63))not-accessiblecurrent
hwNAIRealmEapMethodType
OBJECT-TYPE
This object indicates the authorization type. The default value is 0xffffffff that indicates that the following four types are supported: EAP_AKA, EAP_SIM, EAP_TLS, and EAP_TTLS.
1.3.6.1.4.1.2011.6.139.11.1.51.1.3Unsigned32 (0..255 | 4294967295)not-accessiblecurrent
hwNAIRealmEapAuthenID
OBJECT-TYPE
This object indicates the authorization ID. The default value is 0xffffffff that indicates that all IDs within the value range are supported.
1.3.6.1.4.1.2011.6.139.11.1.51.1.4Unsigned32 (0..255 | 4294967295)not-accessiblecurrent
hwNAIRealmEapAuthenPara
OBJECT-TYPE
This object indicate authorization parameter. The default value is 0xffffffff that indicates all parameters within the value range are supported.
1.3.6.1.4.1.2011.6.139.11.1.51.1.5Unsigned32 (0..255 | 4294967295)read-writecurrent
hwNAIRealmProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.51.1.6RowStatusread-writecurrent
hwVenueNameProfileTable
OBJECT-TYPE
This table is used to configure and query venue name profile parameters.
1.3.6.1.4.1.2011.6.139.11.1.52not-accessiblecurrent
hwVenueNameProfileEntry
OBJECT-TYPE
The index of this table is hwVenueNameProfileName.
1.3.6.1.4.1.2011.6.139.11.1.52.1not-accessiblecurrent
hwVenueNameProfileName
OBJECT-TYPE
This object indicates the name of a venue name profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.52.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwVenueNameLanguageCodeList
OBJECT-TYPE
A value of LanguageCode indicates a language. It is a string of 2-3 characters. For details about GUI value ranges, see ISO 639 on the Codes for the Representation of Names of Languages page. The path is http://www.loc.gov/standards/iso639-2/php/ code_list.php. chi/zho/zh indicates Chinese and eng/en indicates English. NOTE By default, no configuration is added.Values of LanguageCode are separated by question marks (?).A maximum of 32 LanguageCode values can be configured.A LanguageCode value must match a VenueName value.
1.3.6.1.4.1.2011.6.139.11.1.52.1.2OCTET STRING (SIZE(0..256))read-writecurrent
hwVenueNameList
OBJECT-TYPE
If the language-code is set to eng, the name is a string of characters. Rules are the same as those for SSIDs. When it is set to other values, the venue-name is set to a hexadecimal UTF-8 code because current WLANs support English only, for example, venue-name language-code ZHO name 025AB1472568. NOTE By default, no configuration is added.A venue-name value cannot exceed 32 characters.venue-name values are separated by question marks (?).A LanguageCode value must match a VenueName value.
1.3.6.1.4.1.2011.6.139.11.1.52.1.3OCTET STRING (SIZE(0..2048))read-writecurrent
hwVenueNameProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.52.1.4RowStatusread-writecurrent
hwRoamingConsortiumProfileTable
OBJECT-TYPE
This table is used to configure and query roaming consortium profile parameters.
1.3.6.1.4.1.2011.6.139.11.1.53not-accessiblecurrent
hwRoamingConsortiumProfileEntry
OBJECT-TYPE
The index of this table is hwRoamingConsortiumProfileName.
1.3.6.1.4.1.2011.6.139.11.1.53.1not-accessiblecurrent
hwRoamingConsortiumProfileName
OBJECT-TYPE
This object indicates the name of a roaming consortium profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.53.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwRoamingConsortiumOIList
OBJECT-TYPE
This object indicates the roaming consortium member. The roaming consortium OI is a hexadecimal number in the format of HH-HH-HH or HH-HH-HH-HH-HH. The length of a roaming consortium OI is three to five bytes, for example, 12-34-56?12-34-58?34-45-67. NOTE By default, no configuration is added.RoamingConsortiumOI values are separated by question marks (?).A maximum of 32 RoamingConsortiumOI values can be configured.A RoamingConsortiumOI value must match an OIInBeacon value.
1.3.6.1.4.1.2011.6.139.11.1.53.1.2OCTET STRINGread-writecurrent
hwRoamingConsortiumOIInBeaconList
OBJECT-TYPE
This object indicates whether a roaming consortium member carries the inbeacon tag, for example, YES?NO?NO. NOTE By default, no configuration is added.A RoamingConsortiumOI value must match an OIInBeacon value.A maximum of three RoamingConsortiumOI values can be configured.in-beacon can be set to YES.
1.3.6.1.4.1.2011.6.139.11.1.53.1.3OCTET STRINGread-writecurrent
hwRoamingConsortiumProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.53.1.4RowStatusread-writecurrent
hwSACProfileTable
OBJECT-TYPE
This table is used to configure and query SAC profile parameters.
1.3.6.1.4.1.2011.6.139.11.1.54not-accessiblecurrent
hwSACProfileEntry
OBJECT-TYPE
The index of this table is hwSACProfileName.
1.3.6.1.4.1.2011.6.139.11.1.54.1not-accessiblecurrent
hwSACProfileName
OBJECT-TYPE
This object indicates the name of an SAC profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.54.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwSACProfUserStat
OBJECT-TYPE
This object indicates whether the user statistics function is enabled in the SAC profile. The default value is disable (1).
1.3.6.1.4.1.2011.6.139.11.1.54.1.2INTEGER {disable(1), enable(2)}read-writecurrent
hwSACProfVapStat
OBJECT-TYPE
This object indicates whether the VAP statistics function is enabled in the SAC profile. The default value is disable (1).
1.3.6.1.4.1.2011.6.139.11.1.54.1.3INTEGER {disable(1), enable(2)}read-writecurrent
hwSACProfRowStatus
OBJECT-TYPE
This object indicates the row status.
1.3.6.1.4.1.2011.6.139.11.1.54.1.4RowStatusread-writecurrent
hwSACProfileActionTable
OBJECT-TYPE
This table describes SAC profile action configurations.This table is used to configure actions in an SAC profile.
1.3.6.1.4.1.2011.6.139.11.1.55not-accessiblecurrent
hwSACProfileActionEntry
OBJECT-TYPE
Indexes of this table are hwSACProfileName and hwSACProfileActionIndex.
1.3.6.1.4.1.2011.6.139.11.1.55.1not-accessiblecurrent
hwSACProfileActionIndex
OBJECT-TYPE
This object indicates the internal index of the action. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.55.1.1Unsigned32not-accessiblecurrent
hwSACProfileActProtocolType
OBJECT-TYPE
This object indicates the protocol type.
1.3.6.1.4.1.2011.6.139.11.1.55.1.2INTEGER {unknown(0), application(1), applicationGroup(2)}read-writecurrent
hwSACProfileActProtocolName
OBJECT-TYPE
This object indicates the protocol name.
1.3.6.1.4.1.2011.6.139.11.1.55.1.3OCTET STRING (SIZE(0..255))read-writecurrent
hwSACProfileActProtocolGrpName
OBJECT-TYPE
This object indicates the protocol group name.
1.3.6.1.4.1.2011.6.139.11.1.55.1.4OCTET STRING (SIZE(0..35))read-writecurrent
hwSACProfileActionType
OBJECT-TYPE
This object indicates the action type.
1.3.6.1.4.1.2011.6.139.11.1.55.1.5INTEGER {unknown(0), deny(1), car(2), remarkDscp(3), remark8021p(4)}read-createcurrent
hwSACProfileActCarCir
OBJECT-TYPE
This object indicates the CAR CIR value.
1.3.6.1.4.1.2011.6.139.11.1.55.1.6Unsigned32 (64..10000000 | 4294967295)read-writecurrent
hwSACProfileActRemarkDscpValue
OBJECT-TYPE
This object indicates the DSCP value.
1.3.6.1.4.1.2011.6.139.11.1.55.1.7Unsigned32 (0..63)read-writecurrent
hwSACProfileActRemark8021pValue
OBJECT-TYPE
This object indicates the 802.1p priority.
1.3.6.1.4.1.2011.6.139.11.1.55.1.8Unsigned32 (0..7)read-writecurrent
hwSACProfileActionRowstatus
OBJECT-TYPE
This object indicates the row status.
1.3.6.1.4.1.2011.6.139.11.1.55.1.9RowStatusread-writecurrent
hwWlanAPProvision
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.1.56
hwWlanAPProvisionAddressMode
OBJECT-TYPE
This object indicates the IPv4 address allocation mode.
1.3.6.1.4.1.2011.6.139.11.1.56.1INTEGER {invalid(-1), static(1), dhcp(2), slaac(3)}read-writecurrent
hwWlanAPProvisionIPv4Address
OBJECT-TYPE
This object indicates the AP's IPv4 address. hwWlanAPProvisionIPv4Address takes effect if hwAPIPv4Method is set to static.
1.3.6.1.4.1.2011.6.139.11.1.56.2IpAddressread-writecurrent
hwWlanAPProvisionIPv4Mask
OBJECT-TYPE
This object indicates the AP's IPv4 mask. hwWlanAPProvisionIPv4Mask takes effect if hwAPIPv4Method is set to static.
1.3.6.1.4.1.2011.6.139.11.1.56.3IpAddressread-writecurrent
hwWlanAPProvisionIPv4Gateway
OBJECT-TYPE
This object indicates the AP's IPv4 gateway. hwWlanAPProvisionIPv4Gateway takes effect if hwAPIPv4Method is set to static.
1.3.6.1.4.1.2011.6.139.11.1.56.4IpAddressread-writecurrent
hwWlanAPProvisionIPv6Address
OBJECT-TYPE
This object indicates the AP's IPv6 address. hwWlanAPProvisionIPv6Address takes effect if hwAPIPv6Method is set to static.
1.3.6.1.4.1.2011.6.139.11.1.56.5OCTET STRING (SIZE(0..46))read-writecurrent
hwWlanAPProvisionIPv6PrefixLen
OBJECT-TYPE
This object indicates the length of the IPv6 address prefix.
1.3.6.1.4.1.2011.6.139.11.1.56.6Unsigned32 (0..128)read-writecurrent
hwWlanAPProvisionIPv6Gateway
OBJECT-TYPE
This object indicates the AP's IPv6 gateway. hwWlanAPProvisionIPv6Gateway takes effect if hwAPIPv6Method is set to static.
1.3.6.1.4.1.2011.6.139.11.1.56.7OCTET STRING (SIZE(0..46))read-writecurrent
hwWlanAPProvisionGroupName
OBJECT-TYPE
This object indicates the group name.
1.3.6.1.4.1.2011.6.139.11.1.56.8OCTET STRING (SIZE(0..35))read-writecurrent
hwWlanAPProvisionName
OBJECT-TYPE
This object indicates the name of an AP.
1.3.6.1.4.1.2011.6.139.11.1.56.9OCTET STRING (SIZE(0..31))read-writecurrent
hwWlanAPProvisionIPv4ACList
OBJECT-TYPE
This object indicates the AC IPv4 address list. NOTE ACL rules are separated by question marks (?).A maximum of four ACL rules can be configured.
1.3.6.1.4.1.2011.6.139.11.1.56.10OCTET STRINGread-writecurrent
hwWlanAPProvisionIPv6ACList
OBJECT-TYPE
This object indicates the AC IPv6 address list. NOTE ACL rules are separated by question marks (?).A maximum of four ACL rules can be configured.
1.3.6.1.4.1.2011.6.139.11.1.56.11OCTET STRINGread-writecurrent
hwWlanAPProvisionCommitAPName
OBJECT-TYPE
This object indicates that the configuration is delivered based on AP names.
1.3.6.1.4.1.2011.6.139.11.1.56.12OCTET STRING (SIZE(1..31))read-writecurrent
hwWlanAPProvisionCommitAPMac
OBJECT-TYPE
This object indicates that the configuration is delivered based on MAC addresses of APs.
1.3.6.1.4.1.2011.6.139.11.1.56.13MacAddressread-writecurrent
hwWlanAPProvisionCommitAPGroup
OBJECT-TYPE
This object indicates that the configuration is delivered based on AP groups.
1.3.6.1.4.1.2011.6.139.11.1.56.14OCTET STRING (SIZE(1..35))read-writecurrent
hwWlanAPProvisionAPMode
OBJECT-TYPE
This object indicates the AP mode.
1.3.6.1.4.1.2011.6.139.11.1.56.15INTEGER {invalid(-1), fat(1), cloud(2), fit(3)}read-writecurrent
hwWlanAPProvisionCommitAPId
OBJECT-TYPE
This object indicates that the configuration is delivered based on AP ID.
1.3.6.1.4.1.2011.6.139.11.1.56.16Unsigned32read-writecurrent
hwWlanAPProvisionCommitAll
OBJECT-TYPE
This object indicates that the configuration is delivered to all APs.
1.3.6.1.4.1.2011.6.139.11.1.56.17Integer32read-writecurrent
hwWlanAPProvisionManagementVlan
OBJECT-TYPE
This object indicates that the AP management vlan.
1.3.6.1.4.1.2011.6.139.11.1.56.18Unsigned32 (0..4094)read-writecurrent
hwWlanRadioCalibrateManagement
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.1.57
hwWlanRadioCalibrateMode
OBJECT-TYPE
This object indicates the radio calibration mode. The default value is auto(1).
1.3.6.1.4.1.2011.6.139.11.1.57.1INTEGER {auto(1), manual(2), schedule(3)}read-writecurrent
hwWlanRadioCalibrateScheduleTime
OBJECT-TYPE
This object indicates the scheduled radio calibration time.
1.3.6.1.4.1.2011.6.139.11.1.57.2OCTET STRINGread-writecurrent
hwWlanRadioCalibrateManualStartup
OBJECT-TYPE
This object indicates the manually triggered radio calibration. It is valid only when the radio calibration mode is manual.
1.3.6.1.4.1.2011.6.139.11.1.57.3Integer32 (1)read-writecurrent
hwWlanRadioCalibrateAutoInterval
OBJECT-TYPE
This object indicates the automatic radio calibration interval. It is expressed in minutes. The default value is 1440.
1.3.6.1.4.1.2011.6.139.11.1.57.4Integer32 (30..1440)read-writecurrent
hwWlanRadioCalibratePolicy
OBJECT-TYPE
This object indicates the radio calibration policy.bit0: rogue-ap bit2: nonWifi bit3: noise-floor bit1 is invalid. The default value is 0, indicating that this function is not enabled.
1.3.6.1.4.1.2011.6.139.11.1.57.5Unsigned32read-writecurrent
hwWlanRadioCalibrateSensitivity
OBJECT-TYPE
This object indicates the radio calibration sensitivity. The default value is medium(1).
1.3.6.1.4.1.2011.6.139.11.1.57.6INTEGER {medium(1), high(2), low(3), insensitivity(4), custom(5)}read-writecurrent
hwWlanRadioCalibrateAutoStartTime
OBJECT-TYPE
This object indicates the start time of automatic radio calibration. The default value is 03:00:00.
1.3.6.1.4.1.2011.6.139.11.1.57.7OCTET STRINGread-writecurrent
hwWlanRadioCalibrateManualApGroup
OBJECT-TYPE
This object indicates the manually triggered radio calibration based on the AP group. It is valid only when the radio calibration mode is manual.
1.3.6.1.4.1.2011.6.139.11.1.57.8OCTET STRINGread-writecurrent
hwWlanRadioCalibrateManualApList
OBJECT-TYPE
This object indicates the manually triggered radio calibrationbased on the AP list. It is valid only when the radio calibration mode is manual.
1.3.6.1.4.1.2011.6.139.11.1.57.9OCTET STRINGread-writecurrent
hwWlanRadioCalibrateManualProcess
OBJECT-TYPE
This object indicates the radio calibration status
1.3.6.1.4.1.2011.6.139.11.1.57.10Integer32 (0..100)read-onlycurrent
hwWlanRadioCalibrateFlexibleRadio
OBJECT-TYPE
This object indicates the calibration radio flexible-radio status switch. The default value is disable(1).
1.3.6.1.4.1.2011.6.139.11.1.57.11INTEGER {disable(1), autoSwitch(2), autoOff(3)}read-writecurrent
hwWlanRadioCalibrateFlexRadioManualRecognize
OBJECT-TYPE
This object indicates the calibration radio flexible-radio manual recognize.
1.3.6.1.4.1.2011.6.139.11.1.57.12INTEGER {enable(1)}read-writecurrent
hwWlanRadioCalibrateFlexibleRadioProcess
OBJECT-TYPE
This object indicates the calibration radio flexible-radio process.
1.3.6.1.4.1.2011.6.139.11.1.57.13INTEGER {identifying(1), nonidentifying(2)}read-onlycurrent
hwWlanRadioCalibrateFlexibleRadioRecognizeTime
OBJECT-TYPE
This object indicates the start time of flxible radio recolonization.
1.3.6.1.4.1.2011.6.139.11.1.57.14OCTET STRINGread-onlycurrent
hwWlanRadioCalibrateSensitivityCustomValue
OBJECT-TYPE
This object indicates the custom threshold of calibrate sensitivity. It can be set when hwWlanRadioCalibrateSensitivity is custom(5). A larger value indicates lower calibration sensitivity.
1.3.6.1.4.1.2011.6.139.11.1.57.15Unsigned32 (0..95)read-writecurrent
hwWlanRadioCalibrateScheduleTimeRange
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.57.16OCTET STRING (SIZE(1..32))read-writecurrent
hwWlanRadioCalibrateReferenceDataAnalysis
OBJECT-TYPE
This object indicates the status of the referencing data-analysis function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.57.17INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanRadioCalibrateEnvironmentDeteriorateValue
OBJECT-TYPE
This object indicates the environment deterioration threshold function. The default value is 16.
1.3.6.1.4.1.2011.6.139.11.1.57.18Unsigned32 (1..48)read-writecurrent
hwWlanMobilityObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.1.58
hwWlanMobilityManagement
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.1.58.1
hwWlanMasterControllerSwitch
OBJECT-TYPE
This object indicates the status of the CUC function. The default value is disable (1).
1.3.6.1.4.1.2011.6.139.11.1.58.1.1INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanConnectMasterControllerSwitch
OBJECT-TYPE
This objection indicates the status of the connection between the AC and Master Controller. The establishment of connection between the AC and Master Controller requires the IP address of the Master Controller. The default value is disconnect(1).
1.3.6.1.4.1.2011.6.139.11.1.58.1.2INTEGER {disconnect(1), connect(2)}read-writecurrent
hwWlanConnectMasterControllerIPv4Addr
OBJECT-TYPE
This object indicates the IPv4 address of the CUC that needs to set up a link with the Master Controller.
1.3.6.1.4.1.2011.6.139.11.1.58.1.3IpAddressread-writecurrent
hwWlanConnectMasterControllerIPv6Addr
OBJECT-TYPE
This object indicates the IPv6 address of the CUC that needs to set up a link with the Master Controller.
1.3.6.1.4.1.2011.6.139.11.1.58.1.4OCTET STRINGread-writecurrent
hwWlanMobilityServerIPv4
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.1.5IpAddressread-writecurrent
hwWlanMobilityServerIPv6
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.1.6OCTET STRINGread-writecurrent
hwWlanMobilityServerState
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.1.7INTEGER {fault(1), vmiss(2), normal(3)}read-onlycurrent
hwWlanMobilityServerSwitch
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.1.8INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanMobilityServerLocalIPv4
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.1.9IpAddressread-writecurrent
hwWlanMobilityAcTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.2not-accessiblecurrent
hwWlanMobilityAcEntry
OBJECT-TYPE
The index of this table is hwWlanMemAcIndex.
1.3.6.1.4.1.2011.6.139.11.1.58.2.1not-accessiblecurrent
hwWlanMemAcIndex
OBJECT-TYPE
This object indicates the AP ID.
1.3.6.1.4.1.2011.6.139.11.1.58.2.1.1Integer32not-accessiblecurrent
hwWlanAcIPv4Address
OBJECT-TYPE
This object indicates the AC's IPv4 address.
1.3.6.1.4.1.2011.6.139.11.1.58.2.1.2IpAddressread-writecurrent
hwWlanAcIPv6Address
OBJECT-TYPE
This object indicates the AC's IPv6 address.
1.3.6.1.4.1.2011.6.139.11.1.58.2.1.3OCTET STRINGread-writecurrent
hwWlanAcState
OBJECT-TYPE
This object indicates the state of connections to the AC.
1.3.6.1.4.1.2011.6.139.11.1.58.2.1.4INTEGER {normal(1), fault(2)}read-onlycurrent
hwWlanAcRowStatus
OBJECT-TYPE
This object indicates the row status.
1.3.6.1.4.1.2011.6.139.11.1.58.2.1.5RowStatusread-writecurrent
hwWlanMobilityGroupTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.3not-accessiblecurrent
hwWlanMobilityGroupEntry
OBJECT-TYPE
The index of this table is hwWlanMobilityGroupName.
1.3.6.1.4.1.2011.6.139.11.1.58.3.1not-accessiblecurrent
hwWlanMobilityGroupName
OBJECT-TYPE
This object indicates the mobility group name.
1.3.6.1.4.1.2011.6.139.11.1.58.3.1.1OCTET STRINGnot-accessiblecurrent
hwWlanMobilityGroupRowStatus
OBJECT-TYPE
This object indicates to add or delete mobility groups.
1.3.6.1.4.1.2011.6.139.11.1.58.3.1.2RowStatusread-writecurrent
hwWlanMobilityGroupMemberTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.4not-accessiblecurrent
hwWlanMobilityGroupMemberEntry
OBJECT-TYPE
Indexes of this table are hwWlanMobilityGroupName and hwWlanMobilityGroupMemberACIndex.
1.3.6.1.4.1.2011.6.139.11.1.58.4.1not-accessiblecurrent
hwWlanMobilityGroupMemberACIndex
OBJECT-TYPE
This object indicates mobility group members (AC ID).
1.3.6.1.4.1.2011.6.139.11.1.58.4.1.1Integer32not-accessiblecurrent
hwWlanMobilityGroupMemberRowStatus
OBJECT-TYPE
This object indicates to add or delete mobility group members.
1.3.6.1.4.1.2011.6.139.11.1.58.4.1.2RowStatusread-writecurrent
hwWlanMobilityMemberIPv4Table
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.5not-accessiblecurrent
hwWlanMobilityMemberIPv4Entry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.5.1not-accessiblecurrent
hwWlanMobilityMemberIPv4Addr
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.5.1.1IpAddressread-writecurrent
hwWlanMobilityMemberIPv4Description
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.5.1.2OCTET STRINGread-writecurrent
hwWlanMobilityMemberIPv4State
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.5.1.3INTEGER {fault(1), normal(2), vmiss(3), invalid(4)}read-onlycurrent
hwWlanMobilityMemberIPv4RowStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.5.1.4RowStatusread-writecurrent
hwWlanMobilityMemberIPv6Table
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.6not-accessiblecurrent
hwWlanMobilityMemberIPv6Entry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.6.1not-accessiblecurrent
hwWlanMobilityMemberIPv6Addr
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.6.1.1OCTET STRINGread-writecurrent
hwWlanMobilityMemberIPv6Description
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.6.1.2OCTET STRINGread-writecurrent
hwWlanMobilityMemberIPv6State
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.6.1.3INTEGER {fault(1), normal(2), vmiss(3), invalid(4)}read-onlycurrent
hwWlanMobilityMemberIPv6RowStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.6.1.4RowStatusread-writecurrent
hwWlanMobilityClientIPv4Table
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.7not-accessiblecurrent
hwWlanMobilityClientIPv4Entry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.7.1not-accessiblecurrent
hwWlanMobilityClientIPv4Addr
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.7.1.1IpAddressread-onlycurrent
hwWlanMobilityClientIPv4State
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.7.1.2INTEGER {fault(1), normal(2), vmiss(3)}read-onlycurrent
hwWlanMobilityClientIPv6Table
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.8not-accessiblecurrent
hwWlanMobilityClientIPv6Entry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.8.1not-accessiblecurrent
hwWlanMobilityClientIPv6Addr
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.8.1.1OCTET STRINGread-onlycurrent
hwWlanMobilityClientIPv6State
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.58.8.1.2INTEGER {fault(1), normal(2), vmiss(3)}read-onlycurrent
hwWlanLanguageCodeTable
OBJECT-TYPE
It is the language code table. It complies with ISO 639 and is used by hotspot networks to obtain language code information.
1.3.6.1.4.1.2011.6.139.11.1.59not-accessiblecurrent
hwWlanLanguageCodeEntry
OBJECT-TYPE
The index of this table is hwWlanLanguageCode.
1.3.6.1.4.1.2011.6.139.11.1.59.1not-accessiblecurrent
hwWlanLanguageCode
OBJECT-TYPE
This object indicates the language code.
1.3.6.1.4.1.2011.6.139.11.1.59.1.1OCTET STRING (SIZE(2..3))not-accessiblecurrent
hwWlanLanguageCodeDescription
OBJECT-TYPE
This object indicates the description of language codes.
1.3.6.1.4.1.2011.6.139.11.1.59.1.2OCTET STRINGread-onlycurrent
hwFatApConfigObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.1.60
hwFatApGlobalConfig
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.1.60.1
hwFatApCountryCode
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.1.1OCTET STRING (SIZE(2..8))read-writecurrent
hwFatApMaxStaNum
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.1.2Unsigned32 (1..256)read-writecurrent
hwFatApStaAccessMode
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.1.3INTEGER {disable(1), blacklist(2), whitelist(3)}read-writecurrent
hwFatApStaAccessModePorfile
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.1.4OCTET STRING (SIZE(0..35))read-writecurrent
hwFatApHighTempThreshold
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.1.5Unsigned32 (20..100 | 65535)read-writecurrent
hwFatApLowTempThreshold
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.1.6Integer32 (-70..10 | 65535)read-writecurrent
hwFatApDcaChannel5GBandwidth
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.1.7INTEGER {ht20(1), ht40(2), ht80(3)}read-writecurrent
hwFatApDcaChannel5GChannelSet
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.1.8OCTET STRING (SIZE(1..256))read-writecurrent
hwFatApDcaChannel2GChannelSet
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.1.9OCTET STRING (SIZE(1..256))read-writecurrent
hwFatApDynamicBlackAgingTime
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.1.10Unsigned32 (180..3600)read-writecurrent
hwFatApAntennaOutputMode
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.1.11INTEGER {combine(1), split(2)}read-writecurrent
hwFatApChannelLoadMode
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.1.12INTEGER {indoor(1), outdoor(2)}read-writecurrent
hwFatApStaArpNDProxyBeforeAssoc
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.1.13INTEGER {no(1), yes(2)}read-writecurrent
hwFatApRadioTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.2not-accessiblecurrent
hwFatApRadioEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.2.1not-accessiblecurrent
hwFatApRadio
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.2.1.1Unsigned32 (0..2)not-accessiblecurrent
hwFatApRadio0Frequency
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.2.1.2INTEGER {frequency5G(1), frequency2G(2)}read-writecurrent
hwFatApRadio2gProfile
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.2.1.3OCTET STRING (SIZE(1..35))read-writecurrent
hwFatApRadio5gProfile
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.2.1.4OCTET STRING (SIZE(1..35))read-writecurrent
hwFatApRadioMeshProfile
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.2.1.5OCTET STRING (SIZE(0..35))read-writecurrent
hwFatApLocationProfile
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.2.1.7OCTET STRING (SIZE(0..35))read-writecurrent
hwFatApRadioRowStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.2.1.8RowStatusread-writecurrent
hwFatApMeshWhitelistProfile
OBJECT-TYPE
This object indicates the bound whitelist profile.
1.3.6.1.4.1.2011.6.139.11.1.60.2.1.9OCTET STRING (SIZE(0..35))read-writecurrent
hwFatApWdsWhitelistProfile
OBJECT-TYPE
This object indicates the bound whitelist profile.
1.3.6.1.4.1.2011.6.139.11.1.60.2.1.10OCTET STRING (SIZE(0..35))read-writecurrent
hwFatApRadioSwitch
OBJECT-TYPE
This object indicates the name of a 2G radio profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.60.2.1.11INTEGER {disable(1), enable(2)}read-writecurrent
hwFatApRadioChannel
OBJECT-TYPE
This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 165 (with a separation interval of 4).
1.3.6.1.4.1.2011.6.139.11.1.60.2.1.12Unsigned32read-writecurrent
hwFatApRadioBandwidth
OBJECT-TYPE
This object indicate a bandwidth. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.60.2.1.13INTEGER {ht20(1), ht40Plus(2), ht40Minus(3), ht80(4), ht160(5), invalid(255)}read-writecurrent
hwFatApRadioEirp
OBJECT-TYPE
This object indicates a power value. The default value is 127. The configuration is saved but the actual power is determined by the maximum power supported by the AP.
1.3.6.1.4.1.2011.6.139.11.1.60.2.1.14Unsigned32 (1..127)read-writecurrent
hwFatApRadioAntennaGain
OBJECT-TYPE
This object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.
1.3.6.1.4.1.2011.6.139.11.1.60.2.1.15Integer32 (-10..30 | 255)read-writecurrent
hwFatApRadioCoverageDistance
OBJECT-TYPE
This object indicates a radio coverage distance. The default value is 3. The unit is 0.1 km.
1.3.6.1.4.1.2011.6.139.11.1.60.2.1.16Unsigned32 (1..400)read-writecurrent
hwFatApRadioWorkMode
OBJECT-TYPE
This object indicates the radio working mode. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.60.2.1.17INTEGER {normal(1), monitor(2), dualband(3), proxyScan(4)}read-writecurrent
hwFatApWidsDeviceDetectSwitch
OBJECT-TYPE
This object indicates the status of the device detection function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.60.2.1.18INTEGER {disable(1), enable(2)}read-writecurrent
hwFatApWidsAttackDetectEnBmp
OBJECT-TYPE
This object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk.
1.3.6.1.4.1.2011.6.139.11.1.60.2.1.19Unsigned32read-writecurrent
hwFatApWidsRogueContainSwitch
OBJECT-TYPE
This object indicates the status of the device detection function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.60.2.1.20INTEGER {disable(1), enable(2)}read-writecurrent
hwFatApRadioSecondChannel
OBJECT-TYPE
This object indicates a radio-frequency channel. The value ranges from 42,58,106,122,138,155.
1.3.6.1.4.1.2011.6.139.11.1.60.2.1.21Unsigned32read-writecurrent
hwFatApAutoChannelSelectSwitch
OBJECT-TYPE
This object indicates the status of the automatic channel selection function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.60.2.1.22INTEGER {disable(1), enable(2)}read-writecurrent
hwFatApAutoTxPowerSelectSwitch
OBJECT-TYPE
This object indicates the status of the automatic power selection function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.60.2.1.23INTEGER {disable(1), enable(2)}read-writecurrent
hwFatApCalibrateFlexibleRadioSwitch
OBJECT-TYPE
This object indicates the status of the calibrate flexible-radio switch function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.60.2.1.24INTEGER {disable(1), enable(2)}read-writecurrent
hwFatApAutoBandwidthSelectSwitch
OBJECT-TYPE
This object indicates the status of the automatic bandwidth selection function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.60.2.1.25INTEGER {disable(1), enable(2)}read-writecurrent
hwFatApReferenceDataAnalysis
OBJECT-TYPE
This object indicates the status of the referencing data-analysis function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.60.2.1.26INTEGER {disable(1), enable(2)}read-writecurrent
hwFatApVapTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.3not-accessiblecurrent
hwFatApVapEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.3.1not-accessiblecurrent
hwFatApWlanId
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.3.1.1Unsigned32 (1..16)not-accessiblecurrent
hwFatApRadioId
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.3.1.2Unsigned32 (0..2)not-accessiblecurrent
hwFatApVapProfile
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.3.1.3OCTET STRING (SIZE(1..35))read-writecurrent
hwFatApVapProfileRowStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.60.3.1.4RowStatusread-writecurrent
hwFatApRadioServiceIdxTable
OBJECT-TYPE
This table stores information about the Mesh link with the index of 1 on the vehicle-mounted Fat AP and can also be used for subsequent index-based service expansion.
1.3.6.1.4.1.2011.6.139.11.1.60.4not-accessiblecurrent
hwFatApRadioServiceIdxEntry
OBJECT-TYPE
Indexes of this table are hwFatApRadio and hwFatApRadioServiceIdx.
1.3.6.1.4.1.2011.6.139.11.1.60.4.1not-accessiblecurrent
hwFatApRadioServiceIdx
OBJECT-TYPE
This object indicates the service index. The current value is 1.
1.3.6.1.4.1.2011.6.139.11.1.60.4.1.1Unsigned32 (1)not-accessiblecurrent
hwFatApRadioServiceIdxMeshProf
OBJECT-TYPE
This object indicates the bound mesh profile.
1.3.6.1.4.1.2011.6.139.11.1.60.4.1.2OCTET STRING (SIZE(0..35))read-writecurrent
hwFatApRadioIdxMeshWlistProfile
OBJECT-TYPE
This object indicates the bound whitelist profile.
1.3.6.1.4.1.2011.6.139.11.1.60.4.1.3OCTET STRING (SIZE(0..35))read-writecurrent
hwFatApRadioServiceIdxChannel
OBJECT-TYPE
This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 165 (with a separation interval of 4).
1.3.6.1.4.1.2011.6.139.11.1.60.4.1.4Unsigned32read-writecurrent
hwFatApRadioServiceIdxBandwidth
OBJECT-TYPE
This object indicate a bandwidth. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.60.4.1.5INTEGER {ht20(1), ht40Plus(2), ht40Minus(3), ht80(4), ht160(5), invalid(255)}read-writecurrent
hwFatApRadioIdxSecondChannel
OBJECT-TYPE
This object indicates a radio-frequency channel. The value ranges from 42,58,106,122,138,155.
1.3.6.1.4.1.2011.6.139.11.1.60.4.1.6Unsigned32read-writecurrent
hwFatApRadioServiceIdxRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.60.4.1.7RowStatusread-writecurrent
hwNAIRealmProfileListTable
OBJECT-TYPE
This table describes the NAI realm profile.
1.3.6.1.4.1.2011.6.139.11.1.61not-accessiblecurrent
hwNAIRealmProfileListEntry
OBJECT-TYPE
The index of this table is hwNAIRealmProfileListProfileName.
1.3.6.1.4.1.2011.6.139.11.1.61.1not-accessiblecurrent
hwNAIRealmProfileListProfileName
OBJECT-TYPE
This object indicates the profile name.
1.3.6.1.4.1.2011.6.139.11.1.61.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwNAIRealmProfileListRowStatus
OBJECT-TYPE
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.61.1.2RowStatusread-writecurrent
hwWidsSpoofProfileListTable
OBJECT-TYPE
This table is used to create or delete WIDS spoof SSID profiles.
1.3.6.1.4.1.2011.6.139.11.1.62not-accessiblecurrent
hwWidsSpoofProfileListEntry
OBJECT-TYPE
The index of this table is hwWidsSpoofProfileListProfileName.
1.3.6.1.4.1.2011.6.139.11.1.62.1not-accessiblecurrent
hwWidsSpoofProfileListProfileName
OBJECT-TYPE
This object indicates the name of a WIDS spoof SSID profile.
1.3.6.1.4.1.2011.6.139.11.1.62.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwWidsSpoofProfileListRowStatus
OBJECT-TYPE
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.62.1.2RowStatusread-writeobsolete
hwWidsWhitelistProfileListTable
OBJECT-TYPE
This table is used to create or delete WIDS confident profiles.
1.3.6.1.4.1.2011.6.139.11.1.63not-accessiblecurrent
hwWidsWhitelistProfileListEntry
OBJECT-TYPE
The index of this table is hwWidsWhitelistProfileListProfileName.
1.3.6.1.4.1.2011.6.139.11.1.63.1not-accessiblecurrent
hwWidsWhitelistProfileListProfileName
OBJECT-TYPE
This object indicates the name of a WIDS confident profile.
1.3.6.1.4.1.2011.6.139.11.1.63.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwWidsWhitelistProfileListRowStatus
OBJECT-TYPE
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.63.1.2RowStatusread-writeobsolete
hwWlanLoadBalanceStaticGroupTable
OBJECT-TYPE
This table records information about the static load balancing group.
1.3.6.1.4.1.2011.6.139.11.1.64not-accessiblecurrent
hwWlanLoadBalanceStaticGroupEntry
OBJECT-TYPE
The index of this table is hwWlanLBGroupName.
1.3.6.1.4.1.2011.6.139.11.1.64.1not-accessiblecurrent
hwWlanLBGroupName
OBJECT-TYPE
This object indicates the name of the static load balancing group.
1.3.6.1.4.1.2011.6.139.11.1.64.1.1OCTET STRINGnot-accessiblecurrent
hwWlanLBGapThreshold
OBJECT-TYPE
This object indicates the load difference threshold of a static load balancing group.
1.3.6.1.4.1.2011.6.139.11.1.64.1.2Unsigned32read-writecurrent
hwWlanLBDenyThreshold
OBJECT-TYPE
This object indicates the maximum number of times an AP rejects association requests of a STA in the static load balancing group.
1.3.6.1.4.1.2011.6.139.11.1.64.1.3Unsigned32read-writecurrent
hwWlanLBStartThreshold
OBJECT-TYPE
This object indicates the start threshold for load balancing in a static load balancing group.
1.3.6.1.4.1.2011.6.139.11.1.64.1.4Unsigned32read-writecurrent
hwWlanLBGroupStatus
OBJECT-TYPE
This object indicates the load balancing status in the static load balancing group.1: Load is not balanced.2: Load is balanced.
1.3.6.1.4.1.2011.6.139.11.1.64.1.5Unsigned32read-onlycurrent
hwWlanLBGroupRowStatus
OBJECT-TYPE
This object indicates the row status of this table, which can be createAndGo(4) or destroy(6).
1.3.6.1.4.1.2011.6.139.11.1.64.1.6RowStatusread-writecurrent
hwWlanLBMode
OBJECT-TYPE
This object indicates the mode for load balancing in a static load balancing group.
1.3.6.1.4.1.2011.6.139.11.1.64.1.7INTEGER {staNumber(1), channelUtilization(2)}read-writecurrent
hwWlanLBChUtilGapThreshold
OBJECT-TYPE
This object indicates the load difference threshold of a static load balancing group in channel-utilization mode.
1.3.6.1.4.1.2011.6.139.11.1.64.1.8Unsigned32 (1..99)read-writecurrent
hwWlanLBChUtilStartThreshold
OBJECT-TYPE
This object indicates the start threshold for load balancing in a static load balancing group in channel-utilization mode.
1.3.6.1.4.1.2011.6.139.11.1.64.1.9Unsigned32 (1..99)read-writecurrent
hwWlanLBGapStaNumThreshold
OBJECT-TYPE
This object indicates the load difference threshold for static load balancing based on the number of STAs. The value 0 indicates that load balancing is based on the percentage of STAs.
1.3.6.1.4.1.2011.6.139.11.1.64.1.10Integer32 (1..20)read-writecurrent
hwWlanLBDeauthFailTime
OBJECT-TYPE
This object indicates the number of attempts to steer STAs in Deauthentication mode. The default value is 0.
1.3.6.1.4.1.2011.6.139.11.1.64.1.11Unsigned32 (0..5)read-writecurrent
hwWlanLBBtmFailTime
OBJECT-TYPE
This object indicates the number of attempts to steer STAs in BTM mode. The default value is 5.
1.3.6.1.4.1.2011.6.139.11.1.64.1.12Unsigned32 (0..10)read-writecurrent
hwWlanLBSteerRestrictTime
OBJECT-TYPE
This object indicates the time for suppressing STA association with non-target APs during STA steering. The default value is 5, in seconds.
1.3.6.1.4.1.2011.6.139.11.1.64.1.13Unsigned32 (0..10)read-writecurrent
hwWlanLBSteerProbeRestrictThreshold
OBJECT-TYPE
This object indicates the number of times non-target APs suppress STA Probe frames during STA steering. The default value is 5.
1.3.6.1.4.1.2011.6.139.11.1.64.1.14Unsigned32 (0..10)read-writecurrent
hwWlanLBSteerAuthRestrictThreshold
OBJECT-TYPE
This object indicates the number of times non-target APs suppress STA Authentication frames during STA steering. The default value is 0.
1.3.6.1.4.1.2011.6.139.11.1.64.1.15Unsigned32 (0..5)read-writecurrent
hwWlanLBRssiThreshold
OBJECT-TYPE
This object indicates the lower threshold of the target radio RSSI. The default value is -65, in dBm.
1.3.6.1.4.1.2011.6.139.11.1.64.1.16Integer32 (-75..-55)read-writecurrent
hwWlanLBRssiDiffGap
OBJECT-TYPE
This object indicates the threshold of the RSSI gap between the associated radio and target radio. The default value is 5, in dB.
1.3.6.1.4.1.2011.6.139.11.1.64.1.17Unsigned32 (0..15)read-writecurrent
hwWlanLoadBalanceStaticGroupMemberTable
OBJECT-TYPE
This table records information about members in the static load balancing group.
1.3.6.1.4.1.2011.6.139.11.1.65not-accessiblecurrent
hwWlanLoadBalanceStaticGroupMemberEntry
OBJECT-TYPE
The indexes of this table are hwWlanLBGroupName, hwWlanApName, and hwWlanRadioID.
1.3.6.1.4.1.2011.6.139.11.1.65.1not-accessiblecurrent
hwWlanLBMemberRowStatus
OBJECT-TYPE
This object indicates the row status of this table.
1.3.6.1.4.1.2011.6.139.11.1.65.1.1RowStatusread-writecurrent
hwWlanCountryCodeTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.66not-accessiblecurrent
hwWlanCountryCodeEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.66.1not-accessiblecurrent
hwWlanCountryCode
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.66.1.1OCTET STRING (SIZE(0..255))not-accessiblecurrent
hwWlanCountryCodeEngDescription
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.66.1.2OCTET STRING (SIZE(0..255))read-onlycurrent
hwWlanCountryCodeAvailableChannelSet2gBW20
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.66.1.3OCTET STRING (SIZE(0..255))read-onlycurrent
hwWlanCountryCodeAvailableChannelSet2gBW40Plus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.66.1.4OCTET STRING (SIZE(0..255))read-onlycurrent
hwWlanCountryCodeAvailableChannelSet2gBW40Minus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.66.1.5OCTET STRING (SIZE(0..255))read-onlycurrent
hwWlanCountryCodeAvailableChannelSet5gBW20
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.66.1.6OCTET STRING (SIZE(0..255))read-onlycurrent
hwWlanCountryCodeAvailableChannelSet5gBW40Plus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.66.1.7OCTET STRING (SIZE(0..255))read-onlycurrent
hwWlanCountryCodeAvailableChannelSet5gBW40Minus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.66.1.8OCTET STRING (SIZE(0..255))read-onlycurrent
hwWlanCountryCodeAvailableChannelSet5gBW80
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.66.1.9OCTET STRING (SIZE(0..255))read-onlycurrent
hwWlanCountryCodeAvailableChannelSet5gBW160
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.66.1.10OCTET STRING (SIZE(0..255))read-onlycurrent
hwUCCProfileTable
OBJECT-TYPE
This table is used to configure and query UCC profile parameters.
1.3.6.1.4.1.2011.6.139.11.1.67not-accessiblecurrent
hwUCCProfileEntry
OBJECT-TYPE
The index of this table is hwUCCProfileName.
1.3.6.1.4.1.2011.6.139.11.1.67.1not-accessiblecurrent
hwUCCProfileName
OBJECT-TYPE
This object indicates the name of a UCC profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.67.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwUCCProfLyncVoice8021p
OBJECT-TYPE
This object indicates the switch of lync-voice remark 8021p.
1.3.6.1.4.1.2011.6.139.11.1.67.1.2INTEGER {disable(1), enable(2)}read-writecurrent
hwUCCProfLyncVoice8021pValue
OBJECT-TYPE
This object indicates the value of lync-voice remark 8021p.
1.3.6.1.4.1.2011.6.139.11.1.67.1.3Unsigned32 (0..7 | 255)read-writecurrent
hwUCCProfLyncVoiceDscp
OBJECT-TYPE
This object indicates the switch of lync-voice remark dscp.
1.3.6.1.4.1.2011.6.139.11.1.67.1.4INTEGER {disable(1), enable(2)}read-writecurrent
hwUCCProfLyncVoiceDscpValue
OBJECT-TYPE
This object indicates the value of lync-voice remark dscp.
1.3.6.1.4.1.2011.6.139.11.1.67.1.5Unsigned32 (0..63 | 255)read-writecurrent
hwUCCProfLyncVideo8021p
OBJECT-TYPE
This object indicates the switch of lync-video remark 8021p.
1.3.6.1.4.1.2011.6.139.11.1.67.1.6INTEGER {disable(1), enable(2)}read-writecurrent
hwUCCProfLyncVideo8021pValue
OBJECT-TYPE
This object indicates the value of lync-video remark 8021p.
1.3.6.1.4.1.2011.6.139.11.1.67.1.7Unsigned32 (0..7 | 255)read-writecurrent
hwUCCProfLyncVideoDscp
OBJECT-TYPE
This object indicates the switch of lync-video remark dscp.
1.3.6.1.4.1.2011.6.139.11.1.67.1.8INTEGER {disable(1), enable(2)}read-writecurrent
hwUCCProfLyncVideoDscpValue
OBJECT-TYPE
This object indicates the value of lync-video remark dscp.
1.3.6.1.4.1.2011.6.139.11.1.67.1.9Unsigned32 (0..63 | 255)read-writecurrent
hwUCCProfLyncShare8021p
OBJECT-TYPE
This object indicates the switch of lync-destop-share remark 8021p.
1.3.6.1.4.1.2011.6.139.11.1.67.1.10INTEGER {disable(1), enable(2)}read-writecurrent
hwUCCProfLyncShare8021pValue
OBJECT-TYPE
This object indicates the value of lync-destop-share remark 8021p.
1.3.6.1.4.1.2011.6.139.11.1.67.1.11Unsigned32 (0..7 | 255)read-writecurrent
hwUCCProfLyncShareDscp
OBJECT-TYPE
This object indicates the switch of lync-destop-share remark dscp.
1.3.6.1.4.1.2011.6.139.11.1.67.1.12INTEGER {disable(1), enable(2)}read-writecurrent
hwUCCProfLyncShareDscpValue
OBJECT-TYPE
This object indicates the value of lync-destop-share remark dscp.
1.3.6.1.4.1.2011.6.139.11.1.67.1.13Unsigned32 (0..63 | 255)read-writecurrent
hwUCCProfLyncFileTransfer8021p
OBJECT-TYPE
This object indicates the switch of lync-file-transfer remark 8021p.
1.3.6.1.4.1.2011.6.139.11.1.67.1.14INTEGER {disable(1), enable(2)}read-writecurrent
hwUCCProfLyncFileTransfer8021pValue
OBJECT-TYPE
This object indicates the value of lync-file-transfer remark 8021p.
1.3.6.1.4.1.2011.6.139.11.1.67.1.15Unsigned32 (0..7 | 255)read-writecurrent
hwUCCProfLyncFileTransferDscp
OBJECT-TYPE
This object indicates the switch of lync-file-transfer remark dscp.
1.3.6.1.4.1.2011.6.139.11.1.67.1.16INTEGER {disable(1), enable(2)}read-writecurrent
hwUCCProfLyncFileTransferDscpValue
OBJECT-TYPE
This object indicates the value of lync-file-transfer remark dscp.
1.3.6.1.4.1.2011.6.139.11.1.67.1.17Unsigned32 (0..63 | 255)read-writecurrent
hwUCCProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.67.1.18RowStatusread-writecurrent
hwSoftgreProfileTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.68not-accessiblecurrent
hwSoftgreProfileEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.68.1not-accessiblecurrent
hwSoftgreProfileName
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.68.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwSoftgreDestinationIPAddress
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.68.1.2IpAddressread-writecurrent
hwSoftgreDestinationIPv6Address
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.68.1.3OCTET STRINGread-writecurrent
hwSoftgreKeepaliveFlag
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.68.1.4INTEGER {disable(1), enable(2)}read-writecurrent
hwSoftgreKeepalivePeriod
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.68.1.5Unsigned32 (1..32767)read-writecurrent
hwSoftgreKeepaliveRetryTimes
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.68.1.6Unsigned32 (1..255)read-writecurrent
hwSoftgreProfileRowStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.68.1.7RowStatusread-writecurrent
hwSoftgreUntaggedVlanId
OBJECT-TYPE
This object indicates the untagged vlan id of the softgre profile.
1.3.6.1.4.1.2011.6.139.11.1.68.1.8Unsigned32 (0 | 1..4094)read-writecurrent
hwWlanIDIndexedAPSpecificTable
OBJECT-TYPE
This table is used to create or delete an AP specific profile and bind an AP system profile, 2G radio profile, or domain profile to it or unbind an AP system profile, 2G radio profile, or domain profile from it.
1.3.6.1.4.1.2011.6.139.11.1.69not-accessiblecurrent
hwWlanIDIndexedAPSpecificEntry
OBJECT-TYPE
The index of this table is hwWlanIDIndexedAPSpApId.
1.3.6.1.4.1.2011.6.139.11.1.69.1not-accessiblecurrent
hwWlanIDIndexedAPSpApId
OBJECT-TYPE
This object indicates the AP ID.
1.3.6.1.4.1.2011.6.139.11.1.69.1.1Unsigned32not-accessiblecurrent
hwWlanIDIndexedAPSpAPSystemProfile
OBJECT-TYPE
This object indicates the system profile bound to the AP specific profile.
1.3.6.1.4.1.2011.6.139.11.1.69.1.2OCTET STRING (SIZE(0..35))read-writecurrent
hwWlanIDIndexedAPSpDomainProfile
OBJECT-TYPE
This object indicates the domain profile bound to the AP specific profile.
1.3.6.1.4.1.2011.6.139.11.1.69.1.3OCTET STRING (SIZE(0..35))read-writecurrent
hwWlanIDIndexedAPSpApMac
OBJECT-TYPE
This object indicates the MAC address of an AP.
1.3.6.1.4.1.2011.6.139.11.1.69.1.4MacAddressread-writecurrent
hwWlanIDIndexedAPSpApTypeInfo
OBJECT-TYPE
This object indicates the domain profile bound to the AP specific profile.
1.3.6.1.4.1.2011.6.139.11.1.69.1.5OCTET STRING (SIZE(0..35))read-writecurrent
hwWlanIDIndexedAPSpWidsProfile
OBJECT-TYPE
This object indicates the bound WIDS profile.
1.3.6.1.4.1.2011.6.139.11.1.69.1.6OCTET STRING (SIZE(0..35))read-writecurrent
hwWlanIDIndexedAPSpRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.
1.3.6.1.4.1.2011.6.139.11.1.69.1.7RowStatusread-writecurrent
hwWlanIDIndexedAPSpBleProfile
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.69.1.8OCTET STRING (SIZE(0..35))read-writecurrent
hwWlanIDIndexedAPSpLongitude
OBJECT-TYPE
This object indicates the longitude.
1.3.6.1.4.1.2011.6.139.11.1.69.1.9OCTET STRING (SIZE(1..15))read-writecurrent
hwWlanIDIndexedAPSpLatitude
OBJECT-TYPE
This object indicates the latitude.
1.3.6.1.4.1.2011.6.139.11.1.69.1.10OCTET STRING (SIZE(1..14))read-writecurrent
hwWlanIDIndexedSpApAddressMode
OBJECT-TYPE
This object indicates the IP address allocation mode.
1.3.6.1.4.1.2011.6.139.11.1.69.1.11INTEGER {invalid(-1), static(1), dhcp(2), slaac(3)}read-writecurrent
hwWlanIDIndexedSpApIPv4Address
OBJECT-TYPE
This object indicates the AP's IPv4 address. hwWlanIDIndexedSpApIPv4Address takes effect if hwWlanIDIndexedSpApAddressMode is set to static.
1.3.6.1.4.1.2011.6.139.11.1.69.1.12IpAddressread-writecurrent
hwWlanIDIndexedSpApIPv4Mask
OBJECT-TYPE
This object indicates the AP's IPv4 mask. hwWlanIDIndexedSpApIPv4Mask takes effect if hwWlanIDIndexedSpApAddressMode is set to static.
1.3.6.1.4.1.2011.6.139.11.1.69.1.13IpAddressread-writecurrent
hwWlanIDIndexedSpApIPv4Gateway
OBJECT-TYPE
This object indicates the AP's IPv4 gateway. hwWlanIDIndexedSpApIPv4Gateway takes effect if hwWlanIDIndexedSpApAddressMode is set to static.
1.3.6.1.4.1.2011.6.139.11.1.69.1.14IpAddressread-writecurrent
hwWlanIDIndexedSpApIPv6Address
OBJECT-TYPE
This object indicates the AP's IPv6 address. hwWlanIDIndexedSpApIPv6Address takes effect if hwWlanIDIndexedSpApAddressMode is set to static.
1.3.6.1.4.1.2011.6.139.11.1.69.1.15OCTET STRING (SIZE(0..46))read-writecurrent
hwWlanIDIndexedSpApIPv6PrefixLen
OBJECT-TYPE
This object indicates the length of the IPv6 address prefix.
1.3.6.1.4.1.2011.6.139.11.1.69.1.16Unsigned32 (0..128)read-writecurrent
hwWlanIDIndexedSpApIPv6Gateway
OBJECT-TYPE
This object indicates the AP's IPv6 gateway. hwWlanIDIndexedSpApIPv6Gateway takes effect if hwWlanIDIndexedSpApAddressMode is set to static.
1.3.6.1.4.1.2011.6.139.11.1.69.1.17OCTET STRING (SIZE(0..46))read-writecurrent
hwWlanIDIndexedSpIPv4ACList
OBJECT-TYPE
This object indicates the AC IPv4 address list. NOTE AC lists are separated by question marks (?).A maximum of four AC lists can be configured.
1.3.6.1.4.1.2011.6.139.11.1.69.1.18OCTET STRINGread-writecurrent
hwWlanIDIndexedSpIPv6ACList
OBJECT-TYPE
This object indicates the AC IPv6 address list. NOTE AC lists are separated by question marks (?).A maximum of four AC lists can be configured.
1.3.6.1.4.1.2011.6.139.11.1.69.1.19OCTET STRINGread-writecurrent
hwWlanIDIndexedSpGroupName
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.69.1.20OCTET STRING (SIZE(0..35))read-writecurrent
hwWlanIDIndexedSpApName
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.69.1.21OCTET STRING (SIZE(0..31))read-writecurrent
hwWlanIDIndexedAPSpLocation
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.69.1.22OCTET STRING (SIZE(0..63))read-writecurrent
hwWlanIDIndexedAPSpSiteCode
OBJECT-TYPE
This object indicates the site code.
1.3.6.1.4.1.2011.6.139.11.1.69.1.23OCTET STRING (SIZE(0..14))read-writecurrent
hwWlanIDIndexedAPSpDomainName
OBJECT-TYPE
This object indicates the domain name.
1.3.6.1.4.1.2011.6.139.11.1.69.1.24OCTET STRING (SIZE(0..255))read-writecurrent
hwWlanIDIndexedSpBranchGroupName
OBJECT-TYPE
This object indicates the AP branch group name.
1.3.6.1.4.1.2011.6.139.11.1.69.1.25OCTET STRING (SIZE(0..35))read-writecurrent
hwWlanIDIndexedSpManagementVlan
OBJECT-TYPE
This object indicates the AP management vlan.
1.3.6.1.4.1.2011.6.139.11.1.69.1.26Unsigned32 (0..4094)read-writecurrent
hwIDIndexedAPSpecificWiredPortTable
OBJECT-TYPE
This table is used to bind an AP wired port profile to an AP specific profile or unbind an AP wired port profile from an AP specific profile..
1.3.6.1.4.1.2011.6.139.11.1.70not-accessiblecurrent
hwIDIndexedAPSpecificWiredPortEntry
OBJECT-TYPE
Indexes of this table are hwIDIndexedAPSpWPInterfaceType, hwIDIndexedAPSpWPInterfaceNum and hwWlanIDIndexedAPSpApId.
1.3.6.1.4.1.2011.6.139.11.1.70.1not-accessiblecurrent
hwIDIndexedAPSpWPInterfaceType
OBJECT-TYPE
This object indicates the interface type.
1.3.6.1.4.1.2011.6.139.11.1.70.1.1INTEGER {fe(1), ge(2), trunk(3), multige(4), xge(5)}not-accessiblecurrent
hwIDIndexedAPSpWPInterfaceNum
OBJECT-TYPE
This object indicates the interface index.
1.3.6.1.4.1.2011.6.139.11.1.70.1.2Unsigned32 (0..27)not-accessiblecurrent
hwIDIndexedAPSpWPProfile
OBJECT-TYPE
This object indicates the bound wired port profile.
1.3.6.1.4.1.2011.6.139.11.1.70.1.3OCTET STRING (SIZE(0..35))read-writecurrent
hwIDIndexedAPSpWPRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.
1.3.6.1.4.1.2011.6.139.11.1.70.1.4RowStatusread-writecurrent
hwIDIndexedAPSpecificRadioTable
OBJECT-TYPE
This table records the information about profiles bound based on radio in an AP specific profile, including 5G radio profile, Mesh profile, WDS profile, WIDS profile, location profile, and spectrum profile.
1.3.6.1.4.1.2011.6.139.11.1.71not-accessiblecurrent
hwIDIndexedAPSpecificRadioEntry
OBJECT-TYPE
Indexes of this table are hwIDIndexedAPSpRadio and hwWlanIDIndexedAPSpApId.
1.3.6.1.4.1.2011.6.139.11.1.71.1not-accessiblecurrent
hwIDIndexedAPSpRadio
OBJECT-TYPE
This object indicates the radio ID. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.71.1.1Unsigned32 (0..2)not-accessiblecurrent
hwIDIndexedAPSp5gRadioProfile
OBJECT-TYPE
This object indicates the bound 5G radio profile.
1.3.6.1.4.1.2011.6.139.11.1.71.1.2OCTET STRING (SIZE(0..35))read-writecurrent
hwIDIndexedAPSpMeshProfile
OBJECT-TYPE
This object indicates the bound Mesh profile.
1.3.6.1.4.1.2011.6.139.11.1.71.1.3OCTET STRING (SIZE(0..35))read-writecurrent
hwIDIndexedAPSpWdsProfile
OBJECT-TYPE
This object indicates the bound WDS profile.
1.3.6.1.4.1.2011.6.139.11.1.71.1.4OCTET STRING (SIZE(0..35))read-writecurrent
hwIDIndexedAPSpLocationProfile
OBJECT-TYPE
This object indicates the bound location profile.
1.3.6.1.4.1.2011.6.139.11.1.71.1.5OCTET STRING (SIZE(0..35))read-writecurrent
hwIDIndexedAPSpRadio2gProfile
OBJECT-TYPE
This object indicates the system profile to which AP groups are bound. The default value is default.
1.3.6.1.4.1.2011.6.139.11.1.71.1.6OCTET STRING (SIZE(0..35))read-writecurrent
hwIDIndexedAPSpMeshWhitelistProfile
OBJECT-TYPE
This object indicates the bound whitelist profile.
1.3.6.1.4.1.2011.6.139.11.1.71.1.7OCTET STRING (SIZE(0..35))read-writecurrent
hwIDIndexedAPSpWdsWhitelistProfile
OBJECT-TYPE
This object indicates the bound whitelist profile.
1.3.6.1.4.1.2011.6.139.11.1.71.1.8OCTET STRING (SIZE(0..35))read-writecurrent
hwIDIndexedAPSpRadioSwitch
OBJECT-TYPE
This object indicates the name of a 2G radio profile. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.71.1.9INTEGER {disable(1), invalid(255)}read-writecurrent
hwIDIndexedAPSpRadioChannel
OBJECT-TYPE
This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 196 (with a separation interval of 4).
1.3.6.1.4.1.2011.6.139.11.1.71.1.10Unsigned32read-writecurrent
hwIDIndexedAPSpRadioBandwidth
OBJECT-TYPE
This object indicate a bandwidth. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.71.1.11INTEGER {ht20(1), ht40Plus(2), ht40Minus(3), ht80(4), ht160(5), invalid(255)}read-writecurrent
hwIDIndexedAPSpRadioEirp
OBJECT-TYPE
This object indicates a power value. The default value is 127(from V2R8C10; The default value is 255 before V2R8C10.). The configuration is saved but the actual power is determined by the maximum power supported by the AP.
1.3.6.1.4.1.2011.6.139.11.1.71.1.12Unsigned32 (1..127 | 255)read-writecurrent
hwIDIndexedAPSpRadioAntennaGain
OBJECT-TYPE
This object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.
1.3.6.1.4.1.2011.6.139.11.1.71.1.13Integer32 (-10..30 | 255)read-writecurrent
hwIDIndexedAPSpRadioCoverageDistance
OBJECT-TYPE
This object indicates a radio coverage distance. The default value is 3. The unit is 0.1 km.
1.3.6.1.4.1.2011.6.139.11.1.71.1.14Unsigned32 (1..400 | 65535)read-writecurrent
hwIDIndexedAPSpRadioWorkMode
OBJECT-TYPE
This object indicates the radio working mode. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.71.1.15INTEGER {normal(1), monitor(2), dualband(3), proxyScan(4), invalid(255)}read-writecurrent
hwIDIndexedAPSpRadioFrequency
OBJECT-TYPE
This object indicates the setting of the frequency band for radio 0. The default value is invalid. 1: frequency2G, 2: frequency5G.
1.3.6.1.4.1.2011.6.139.11.1.71.1.16INTEGER {frequency2G(1), frequency5G(2), invalid(255)}read-writecurrent
hwIDIndexedAPSpSpectrumAnalysisSwitch
OBJECT-TYPE
This object indicates the status of the spectrum analysis function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.71.1.17INTEGER {enable(2), invalid(255)}read-writecurrent
hwIDIndexedAPSpWidsDeviceDetectSwitch
OBJECT-TYPE
This object indicates the status of the device detection function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.71.1.18INTEGER {enable(2), invalid(255)}read-writecurrent
hwIDIndexedAPSpWidsAttackDetectEnBmp
OBJECT-TYPE
This object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk.
1.3.6.1.4.1.2011.6.139.11.1.71.1.19Unsigned32read-writeobsolete
hwIDIndexedAPSpWidsRogueContainSwitch
OBJECT-TYPE
This object indicates the status of the device detection function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.71.1.20INTEGER {enable(2), invalid(255)}read-writecurrent
hwIDIndexedAPSpRadioRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.71.1.21RowStatusread-writecurrent
hwIDIndexedAPSpRadioSecondChannel
OBJECT-TYPE
This object indicates a second radio-frequency channel.The value ranges from 42,58,106,122,138,155.
1.3.6.1.4.1.2011.6.139.11.1.71.1.22Unsigned32read-writecurrent
hwIDIndexedAPSpAutoChannelSelectSwitch
OBJECT-TYPE
This object indicates the status of the automatic channel selection function.
1.3.6.1.4.1.2011.6.139.11.1.71.1.23INTEGER {disable(1), enable(2), invalid(255)}read-writecurrent
hwIDIndexedAPSpAutoTxPowerSelectSwitch
OBJECT-TYPE
This object indicates the status of the automatic power selection function.
1.3.6.1.4.1.2011.6.139.11.1.71.1.24INTEGER {disable(1), enable(2), invalid(255)}read-writecurrent
hwIDIndexedAPSpSfnRoamCtsSwitch
OBJECT-TYPE
This object indicates the status of Cts Switch. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.71.1.25INTEGER {disable(1), invalid(255)}read-writecurrent
hwIDIndexedAPSpSfnRoamBeaconSwitch
OBJECT-TYPE
This object indicates the status of Beacon Switch. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.71.1.26INTEGER {disable(1), invalid(255)}read-writecurrent
hwIDIndexedAPSpSfnRoamCtsDelay
OBJECT-TYPE
This object indicates Cts Delay time. The default value is 0.
1.3.6.1.4.1.2011.6.139.11.1.71.1.27Unsigned32 (0..255)read-writecurrent
hwIDIndexedAPSpRadioCalibrateFlexibleRadio
OBJECT-TYPE
This object indicates the status of calibrate flexible-radio. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.71.1.28INTEGER {disable(1), invalid(255)}read-writecurrent
hwIDIndexedAPSpAutoBandwidthSelectSwitch
OBJECT-TYPE
This object indicates the status of the automatic bandwidth selection function. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.71.1.29INTEGER {disable(1), enable(2), invalid(255)}read-writecurrent
hwIDIndexedAPSpReferenceDataAnalysis
OBJECT-TYPE
This object indicates the status of the referencing data-analysis function. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.71.1.30INTEGER {disable(1), enable(2), invalid(255)}read-writecurrent
hwIDIndexedAPSpWidsAttackDetectWeakIv
OBJECT-TYPE
This object indicates weak IV attack detection. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.71.1.31INTEGER {disable(1), enable(2), invalid(255)}read-writecurrent
hwIDIndexedAPSpWidsAttackDetectSpoof
OBJECT-TYPE
This object indicates spoofing attack detection. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.71.1.32INTEGER {disable(1), enable(2), invalid(255)}read-writecurrent
hwIDIndexedAPSpWidsAttackDetectFlood
OBJECT-TYPE
This object indicates flood attack detection. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.71.1.33INTEGER {disable(1), enable(2), invalid(255)}read-writecurrent
hwIDIndexedAPSpWidsAttackDetectWpaPsk
OBJECT-TYPE
This object indicates brute force attack detection in WPA-PSK authentication. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.71.1.34INTEGER {disable(1), enable(2), invalid(255)}read-writecurrent
hwIDIndexedAPSpWidsAttackDetectWpa2Psk
OBJECT-TYPE
This object indicates brute force attack detection in WPA2-PSK authentication. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.71.1.35INTEGER {disable(1), enable(2), invalid(255)}read-writecurrent
hwIDIndexedAPSpWidsAttackDetectWapiPsk
OBJECT-TYPE
This object indicates brute force attack detection in WAPI-PSK authentication. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.71.1.36INTEGER {disable(1), enable(2), invalid(255)}read-writecurrent
hwIDIndexedAPSpWidsAttackDetectWepShareKey
OBJECT-TYPE
This object indicates brute force attack detection in WEP shared key authentication. The default value is 255.
1.3.6.1.4.1.2011.6.139.11.1.71.1.37INTEGER {disable(1), enable(2), invalid(255)}read-writecurrent
hwIDIndexedAPSpecificVapTable
OBJECT-TYPE
This table is used to create VAPs in an AP specific profile.
1.3.6.1.4.1.2011.6.139.11.1.72not-accessiblecurrent
hwIDIndexedAPSpecificVapEntry
OBJECT-TYPE
Indexes of this table are hwIDIndexedAPSpWlan, hwIDIndexedAPSpRadio, and hwWlanIDIndexedAPSpApId.
1.3.6.1.4.1.2011.6.139.11.1.72.1not-accessiblecurrent
hwIDIndexedAPSpWlan
OBJECT-TYPE
This object indicates the WLAN ID. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.72.1.1Unsigned32 (1..16)not-accessiblecurrent
hwIDIndexedAPSpVapProfile
OBJECT-TYPE
This object indicates the bound VAP profile.
1.3.6.1.4.1.2011.6.139.11.1.72.1.2OCTET STRING (SIZE(1..35))read-writecurrent
hwIDIndexedAPSpVapRowStatus
OBJECT-TYPE
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.72.1.3RowStatusread-writecurrent
hwIDIndexedAPSpVapServiceVlan
OBJECT-TYPE
This object indicates the service VLAN for the VAP. The invalid value is 0.
1.3.6.1.4.1.2011.6.139.11.1.72.1.4Unsigned32 (1..4094)read-writecurrent
hwIDIndexedAPSpVapVlanPool
OBJECT-TYPE
This object indicates the VLAN pool to which the VAP is bound.
1.3.6.1.4.1.2011.6.139.11.1.72.1.5OCTET STRING (SIZE(0..31))read-writecurrent
hwBleProfileTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.73not-accessiblecurrent
hwBleProfileEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.73.1not-accessiblecurrent
hwWlanBLEProfileName
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.73.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwWlanBLEBroadcasterEnable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.73.1.2INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanBLETxPower
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.73.1.3Integer32read-writecurrent
hwWlanBLEBroadcastingUUID
OBJECT-TYPE
This object indicates the string type value of UUID field in the BLE broadcast frame.
1.3.6.1.4.1.2011.6.139.11.1.73.1.4OCTET STRING (SIZE(0..16))read-writecurrent
hwWlanBLEBroadcastingMajor
OBJECT-TYPE
This object indicates the string type value of Major field in the BLE broadcast frame.
1.3.6.1.4.1.2011.6.139.11.1.73.1.5OCTET STRING (SIZE(0..2))read-writecurrent
hwWlanBLEBroadcastingMinor
OBJECT-TYPE
This object indicates the string type value of Minor field in the BLE broadcast frame.
1.3.6.1.4.1.2011.6.139.11.1.73.1.6OCTET STRING (SIZE(0..2))read-writecurrent
hwWlanBLEBroadcastingReferenceRSSI
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.73.1.7Integer32 (-97..-50 | 0)read-writecurrent
hwWlanBLEBroadcastingInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.73.1.8Unsigned32 (100..10240)read-writecurrent
hwWlanBLESnifferEnable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.73.1.9INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanBLEProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.73.1.10RowStatusread-writecurrent
hwWlanBLEBroadcastingUUIDHex
OBJECT-TYPE
This object indicates the hex type value of UUID field in the BLE broadcast frame.
1.3.6.1.4.1.2011.6.139.11.1.73.1.11OCTET STRING (SIZE(0..32))read-writecurrent
hwWlanBLEBroadcastingMajorHex
OBJECT-TYPE
This object indicates the hex type value of Major field in the BLE broadcast frame.
1.3.6.1.4.1.2011.6.139.11.1.73.1.12OCTET STRING (SIZE(0..4))read-writecurrent
hwWlanBLEBroadcastingMajorDecimal
OBJECT-TYPE
This object indicates the decimal type value of Major field in the BLE broadcast frame. The default value is -1.
1.3.6.1.4.1.2011.6.139.11.1.73.1.13Integer32 (-1 | 0..65535)read-writecurrent
hwWlanBLEBroadcastingMinorHex
OBJECT-TYPE
This object indicates the hex type value of Minor field in the BLE broadcast frame.
1.3.6.1.4.1.2011.6.139.11.1.73.1.14OCTET STRING (SIZE(0..4))read-writecurrent
hwWlanBLEBroadcastingMinorDecimal
OBJECT-TYPE
This object indicates the decimal type value of Minor field in the BLE broadcast frame. The default value is -1.
1.3.6.1.4.1.2011.6.139.11.1.73.1.15Integer32 (-1 | 0..65535)read-writecurrent
hwWlanBLESnifferMode
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.73.1.16INTEGER {disable(1), ibeacon(2), tag(3), transparent(4)}read-writecurrent
hwWlanBLEReportEnable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.73.1.17INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanBLEReportMode
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.73.1.18INTEGER {periodic(1), immediate(2)}read-writecurrent
hwWlanBLEReportInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.73.1.19Integer32 (1..600)read-writecurrent
hwWlanBLEReportServerIPAddress
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.73.1.20IpAddressread-writecurrent
hwWlanBLEReportServerIPv6Address
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.73.1.21OCTET STRINGread-writecurrent
hwWlanBLEReportServerPort
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.73.1.22Unsigned32 (0 | 1..65535)read-writecurrent
hwWlanBLEReportServerViaACEnable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.73.1.23INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanBLEReportServerViaACPort
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.73.1.24Unsigned32 (0 | 5000..65535)read-writecurrent
hwWlanBLESourceIPAddress
OBJECT-TYPE
This object indicates the source IPv4 address for reporting ble location data. You choose an IPv4 address.
1.3.6.1.4.1.2011.6.139.11.1.73.1.25IpAddressread-writecurrent
hwWlanBLESourceIPv6Address
OBJECT-TYPE
This object indicates the source IPv6 address for reporting ble location data. You choose an IPv6 address.
1.3.6.1.4.1.2011.6.139.11.1.73.1.26OCTET STRINGread-writecurrent
hwWlanBLEServerAddressDomain
OBJECT-TYPE
This object indicates server's domain name.
1.3.6.1.4.1.2011.6.139.11.1.73.1.27OCTET STRING (SIZE(0..255))read-writecurrent
hwAPGroupCardTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.74not-accessiblecurrent
hwAPGroupCardEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.74.1not-accessiblecurrent
hwAPGrpCardIndex
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.74.1.1Unsigned32 (0..2)not-accessiblecurrent
hwAPGrpCardSerialProfile
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.74.1.2OCTET STRING (SIZE(1..35))read-writecurrent
hwAPGrpCardProfile
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.74.1.3OCTET STRING (SIZE(0..35))read-writecurrent
hwAPGrpCardNetUDPPort
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.74.1.4Unsigned32 (1025..55535 | 4294967295)read-writecurrent
hwAPGrpIoTRowStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.74.1.5RowStatusread-writecurrent
hwAPGrpCardNetTCPPort
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.74.1.6Unsigned32 (1025..55535 | 4294967295)read-writecurrent
hwAPGroupCardWiredPortProfile
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.74.1.7OCTET STRING (SIZE(0..35))read-writecurrent
hwAPGrpCardConnType
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.74.1.8INTEGER {serial(1), ethernet(2), unknown(3)}read-writecurrent
hwAPGrpCardNetProtocolType
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.74.1.9INTEGER {udp(1), tcp(2), invalid(3)}read-writecurrent
hwAPGrpCardNetPort
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.74.1.10Unsigned32 (4294967295 | 1025..55535)read-writecurrent
hwAPGrpCardNetExtPort
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.74.1.11Unsigned32 (4294967295 | 1025..55535)read-writecurrent
hwAPSpecificCardTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.75not-accessiblecurrent
hwAPSpecificCardEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.75.1not-accessiblecurrent
hwAPSpIoTIndex
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.75.1.1Unsigned32 (0..2)not-accessiblecurrent
hwAPSpIoTSerialProfile
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.75.1.2OCTET STRING (SIZE(1..35))read-writecurrent
hwAPSpIoTProfile
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.75.1.3OCTET STRING (SIZE(0..35))read-writecurrent
hwAPSpIoTNetUDPPort
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.75.1.4Unsigned32 (1025..55535 | 4294967295)read-writecurrent
hwAPSpIoTRowStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.75.1.5RowStatusread-writecurrent
hwAPSpIoTNetTCPPort
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.75.1.6Unsigned32 (1025..55535 | 4294967295)read-writecurrent
hwAPSpIoTWiredPortProfile
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.75.1.7OCTET STRING (SIZE(0..35))read-writecurrent
hwAPSpCardConnType
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.75.1.8INTEGER {serial(1), ethernet(2), unknown(3)}read-writecurrent
hwAPSpIoTNetProtocolType
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.75.1.9INTEGER {udp(1), tcp(2), invalid(3)}read-writecurrent
hwAPSpIoTNetPort
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.75.1.10Unsigned32 (4294967295 | 1025..55535)read-writecurrent
hwAPSpIoTNetExtPort
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.75.1.11Unsigned32 (4294967295 | 1025..55535)read-writecurrent
hwIoTSerialProfileTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.76not-accessiblecurrent
hwIoTSerialProfileEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.76.1not-accessiblecurrent
hwIoTSerialProfileName
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.76.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwIoTSerialSpeed
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.76.1.2Unsigned32 (9600..115200)read-writecurrent
hwIoTSerialParity
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.76.1.3INTEGER {none(1), odd(2), even(3), space(4), mark(5)}read-writecurrent
hwIoTSerialStopbits
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.76.1.4INTEGER {one(1), two(2)}read-writecurrent
hwIoTSerialFrameFormat
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.76.1.5INTEGER {fixedLength(1), frameBeginEnd(2)}read-writecurrent
hwIoTSerialFrameLength
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.76.1.6Unsigned32 (1..1400)read-writecurrent
hwIoTSerialFrameStart
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.76.1.7Unsigned32 (0..255)read-writecurrent
hwIoTSerialFrameStop
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.76.1.8Unsigned32 (0..255)read-writecurrent
hwIoTSerialProfileRowStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.76.1.9RowStatusread-writecurrent
hwIoTProfileTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.77not-accessiblecurrent
hwIoTProfileEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.77.1not-accessiblecurrent
hwIoTProfileName
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.77.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwIoTProfileConfigAgentPermitIp
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.77.1.2IpAddressread-writecurrent
hwIoTProfileConfigAgentPermitMaskLen
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.77.1.3Unsigned32 (0..32)read-writecurrent
hwIoTProfileShareKey
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.77.1.4OCTET STRING (SIZE(0..68))read-writecurrent
hwIoTProfileRowStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.77.1.5RowStatusread-writecurrent
hwIoTProfileType
OBJECT-TYPE
This object indicates the profile type. The default value is 0.
1.3.6.1.4.1.2011.6.139.11.1.77.1.6INTEGER {common(0), casEdu(1)}read-writecurrent
hwIoTProfileAntennaStatus
OBJECT-TYPE
This object indicates the antenna status of card.
1.3.6.1.4.1.2011.6.139.11.1.77.1.7INTEGER {external(1), internal(2), invalid(3)}read-writecurrent
hwIoTProfileManagementServerTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.78not-accessiblecurrent
hwIoTProfileManagementServerEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.78.1not-accessiblecurrent
hwIoTProfileManagementServerIndex
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.78.1.1Unsigned32 (0..4)not-accessiblecurrent
hwIoTProfileManagementServerIp
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.78.1.2IpAddressread-writecurrent
hwIoTProfileManagementServerPort
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.78.1.3Unsigned32 (1..65535 | 4294967295)read-writecurrent
hwIoTProfileManagementServerRowStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.78.1.4RowStatusread-writecurrent
hwIoTProfileManagementServerDomain
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.78.1.5OCTET STRING (SIZE(1..63))read-writecurrent
hwVapAntiAttackUserDefFloodTable
OBJECT-TYPE
This table describes SAC profile action configurations.This table is used to configure actions in an SAC profile.
1.3.6.1.4.1.2011.6.139.11.1.79not-accessiblecurrent
hwVapAntiAttackUserDefFloodEntry
OBJECT-TYPE
Indexes of this table are hwVapAntiAttackDefFloodIndex and hwVapProfileName.
1.3.6.1.4.1.2011.6.139.11.1.79.1not-accessiblecurrent
hwVapAntiAttackDefFloodIndex
OBJECT-TYPE
This object indicates the internal index of the action. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.79.1.1Unsigned32 (0..7)not-accessiblecurrent
hwVapAntiAttackDefFloodProtocolType
OBJECT-TYPE
This object indicates the protocol type.
1.3.6.1.4.1.2011.6.139.11.1.79.1.2INTEGER {unknown(0), l2(1), ipv4(2), ipv6(3), tcp(4), udp(5)}read-writecurrent
hwVapAntiAttackDefFloodProtocolValue
OBJECT-TYPE
This object indicates the protocol value.
1.3.6.1.4.1.2011.6.139.11.1.79.1.3Unsigned32 (0..65535)read-writecurrent
hwVapAntiAttackDefFloodStaRateThreshold
OBJECT-TYPE
This object indicates the anti-attack user-defined flood sta-rate-threshold for the VAP.
1.3.6.1.4.1.2011.6.139.11.1.79.1.4Unsigned32 (1..500 | 4294967295)read-writecurrent
hwVapAntiAttackDefFloodBlacklistSwitch
OBJECT-TYPE
This object indicates the status of the VAP anti-attack user-defined flood blacklist function.
1.3.6.1.4.1.2011.6.139.11.1.79.1.5INTEGER {disable(1), enable(2)}read-writecurrent
hwVapAntiAttackDefFloodRowStatus
OBJECT-TYPE
This object indicates the row status.
1.3.6.1.4.1.2011.6.139.11.1.79.1.6RowStatusread-writecurrent
hwApProfIGMPSnoopingGroupTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.80not-accessiblecurrent
hwApProfIGMPSnoopingGroupEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.80.1not-accessiblecurrent
hwAPProfIGMPSnoopingGroupIndex
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.80.1.1Unsigned32 (0..31)not-accessiblecurrent
hwAPProfIGMPSnoopingGroupStartGroupAddr
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.80.1.2IpAddressread-writecurrent
hwAPProfIGMPSnoopingGroupEndGroupAddr
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.80.1.3IpAddressread-writecurrent
hwAPProfIGMPSnoopingGroupBandwidth
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.80.1.4Unsigned32 (4294967295 | 1..100000)read-writecurrent
hwAPProfIGMPSnoopingGroupRowStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.80.1.5RowStatusread-writecurrent
hwAPWiredPortProfileTrafficRemarkTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.81not-accessiblecurrent
hwAPWiredPortProfileTrafficRemarkEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.81.1not-accessiblecurrent
hwAPWiredPortProfileTrafficRemarkDirection
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.81.1.1INTEGER {inbond(1), outbond(2)}not-accessiblecurrent
hwAPWiredPortProfileTrafficRemarkIPType
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.81.1.2INTEGER {ipv4(1), ipv6(2), l2(3)}not-accessiblecurrent
hwAPWiredPortProfileTrafficRemarkACLID
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.81.1.3Unsigned32 (3000..3031 | 4000..4031)read-writecurrent
hwAPWiredPortProfileTrafficRemarkType
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.81.1.4INTEGER {dscp(1), dot1p(2)}read-writecurrent
hwAPWiredPortProfileTrafficRemarkValue
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.81.1.5Unsigned32 (0..63)read-writecurrent
hwAPWiredPortProfileTrafficRemarkRowStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.81.1.6RowStatusread-writecurrent
hwAPTrafficProfileRemarkTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.82not-accessiblecurrent
hwAPTrafficProfileRemarkEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.82.1not-accessiblecurrent
hwAPTrafficProfileRemarkDirection
OBJECT-TYPE
This object indicates the ACL rule direction for packet remarking in a traffic profile. This parameter has no default value.
1.3.6.1.4.1.2011.6.139.11.1.82.1.1INTEGER {inbound(1), outbound(2)}not-accessiblecurrent
hwAPTrafficProfileRemarkIPType
OBJECT-TYPE
This object indicates the ACL rule type for packet remarking in a traffic profile. This parameter has no default value.
1.3.6.1.4.1.2011.6.139.11.1.82.1.2INTEGER {ipv4(1), ipv6(2), l2(3)}not-accessiblecurrent
hwAPTrafficProfileRemarkACLID
OBJECT-TYPE
This object indicates the ACL rule for packet remarking in a traffic profile.
1.3.6.1.4.1.2011.6.139.11.1.82.1.3Integer32 (3000..3031 | 4000..4031 | 6000..6031)read-writecurrent
hwAPTrafficProfileRemarkType
OBJECT-TYPE
This object indicates the ACL rule type for packet remarking in a traffic profile. This parameter has no default value.
1.3.6.1.4.1.2011.6.139.11.1.82.1.4INTEGER {dscp(1), dot11e(3)}read-writecurrent
hwAPTrafficProfileRemarkValue
OBJECT-TYPE
This object indicates the ACL rule value for packet remarking in a traffic profile. This parameter has no default value.
1.3.6.1.4.1.2011.6.139.11.1.82.1.5Integer32 (0..63)read-writecurrent
hwAPTrafficProfileRemarkRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.82.1.6RowStatusread-writecurrent
hwWlanClusterConfig
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.1.83
hwWlanClusterMasterConfig
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.1.83.1
hwWlanClusterMasterIPv4Address
OBJECT-TYPE
This object indicates the IPv4 address of the master controller.
1.3.6.1.4.1.2011.6.139.11.1.83.1.1IpAddressread-writecurrent
hwWlanClusterMasterIPv6Address
OBJECT-TYPE
This object indicates the IPv6 address of the master controller.
1.3.6.1.4.1.2011.6.139.11.1.83.1.2OCTET STRINGread-writecurrent
hwWlanClusterPsk
OBJECT-TYPE
This object indicates the psk of the master controller.
1.3.6.1.4.1.2011.6.139.11.1.83.1.3OCTET STRINGread-writecurrent
hwWlanClusterRedundancyConfig
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.1.83.2
hwWlanClusterRedundancyLocalIPv4Address
OBJECT-TYPE
This object indicates the IPv4 address of the local ac.
1.3.6.1.4.1.2011.6.139.11.1.83.2.1IpAddressread-writecurrent
hwWlanClusterRedundancyLocalIPv6Address
OBJECT-TYPE
This object indicates the IPv6 address of the local ac.
1.3.6.1.4.1.2011.6.139.11.1.83.2.2OCTET STRINGread-writecurrent
hwWlanClusterRedundancyPeerIPv4Address
OBJECT-TYPE
This object indicates the IPv4 address of the peer ac.
1.3.6.1.4.1.2011.6.139.11.1.83.2.3IpAddressread-writecurrent
hwWlanClusterRedundancyPeerIPv6Address
OBJECT-TYPE
This object indicates the IPv6 address of the peer ac.
1.3.6.1.4.1.2011.6.139.11.1.83.2.4OCTET STRINGread-writecurrent
hwWlanClusterRedundancyTrackVRRPID
OBJECT-TYPE
This object indicates the vrrp id.
1.3.6.1.4.1.2011.6.139.11.1.83.2.5Integer32read-writecurrent
hwWlanClusterRedundancyTrackInterface
OBJECT-TYPE
This object indicates the interface index.
1.3.6.1.4.1.2011.6.139.11.1.83.2.6Integer32read-writecurrent
hwWlanClusterRedundancyPsk
OBJECT-TYPE
This object indicates the psk of the redundancy ac.
1.3.6.1.4.1.2011.6.139.11.1.83.2.7OCTET STRINGread-writecurrent
hwWlanClusterRedundancyTrackVRRPType
OBJECT-TYPE
This object indicates the information about the track VRRP type.
1.3.6.1.4.1.2011.6.139.11.1.83.2.8INTEGER {vrrpv4(1), vrrpv6(2), invalid(3)}read-writecurrent
hwWlanClusterLocalIPv4Table
OBJECT-TYPE
This table describes the configuration of the local controller.
1.3.6.1.4.1.2011.6.139.11.1.83.3not-accessiblecurrent
hwWlanClusterLocalIPv4Entry
OBJECT-TYPE
This table has no index.
1.3.6.1.4.1.2011.6.139.11.1.83.3.1not-accessiblecurrent
hwWlanClusterLocalIPv4Address
OBJECT-TYPE
This object indicates the IPv4 address of the local controller.
1.3.6.1.4.1.2011.6.139.11.1.83.3.1.1IpAddressnot-accessiblecurrent
hwWlanClusterLocalIPv4Psk
OBJECT-TYPE
This object indicates the psk of the local controller.
1.3.6.1.4.1.2011.6.139.11.1.83.3.1.2OCTET STRINGread-writecurrent
hwWlanClusterLocalIPv4RowStatus
OBJECT-TYPE
This object indicates the row status.
1.3.6.1.4.1.2011.6.139.11.1.83.3.1.3RowStatusread-writecurrent
hwWlanClusterLocalIPv6Table
OBJECT-TYPE
This table describes the configuration of the local controller.
1.3.6.1.4.1.2011.6.139.11.1.83.4not-accessiblecurrent
hwWlanClusterLocalIPv6Entry
OBJECT-TYPE
This table has no index.
1.3.6.1.4.1.2011.6.139.11.1.83.4.1not-accessiblecurrent
hwWlanClusterLocalIPv6Address
OBJECT-TYPE
This object indicates the IPv6 address of the local controller.
1.3.6.1.4.1.2011.6.139.11.1.83.4.1.1OCTET STRINGnot-accessiblecurrent
hwWlanClusterLocalIPv6Psk
OBJECT-TYPE
This object indicates the psk of the local controller.
1.3.6.1.4.1.2011.6.139.11.1.83.4.1.2OCTET STRINGread-writecurrent
hwWlanClusterLocalIPv6RowStatus
OBJECT-TYPE
This object indicates the row status.
1.3.6.1.4.1.2011.6.139.11.1.83.4.1.3RowStatusread-writecurrent
hwWlanClusterSynConfig
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.1.83.5
hwWlanClusterSynIPv4Address
OBJECT-TYPE
This object indicates the Ipv4 address of the synchronize-configuration.
1.3.6.1.4.1.2011.6.139.11.1.83.5.1IpAddressread-writecurrent
hwWlanClusterSynIPv6Address
OBJECT-TYPE
This object indicates the Ipv6 address of the synchronize-configuration.
1.3.6.1.4.1.2011.6.139.11.1.83.5.2OCTET STRINGread-writecurrent
hwWlanClusterSynConfigurationOper
OBJECT-TYPE
This object indicates to synchronize configuration. It is write only.
1.3.6.1.4.1.2011.6.139.11.1.83.5.3INTEGER {synConfig(1)}read-writecurrent
hwWlanClusterSynConfigScheduleEnable
OBJECT-TYPE
This object indicates to the switch of scheduled synchronize configuration.
1.3.6.1.4.1.2011.6.139.11.1.83.5.4INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanClusterSynConfigScheduleTime
OBJECT-TYPE
This object indicates the scheduled synchronize configuration time.
1.3.6.1.4.1.2011.6.139.11.1.83.5.5OCTET STRINGread-writecurrent
hwWlanClusterSynConfigScheduleInterval
OBJECT-TYPE
This object indicates the interval of scheduled synchronize configuration. It is expressed in minutes. The default value is 1440.
1.3.6.1.4.1.2011.6.139.11.1.83.5.6Integer32 (720..7200)read-writecurrent
hwWlanClusterACListInfoTable
OBJECT-TYPE
This table describes the ac information.
1.3.6.1.4.1.2011.6.139.11.1.83.6not-accessiblecurrent
hwWlanClusterACListInfoEntry
OBJECT-TYPE
This table has no index.
1.3.6.1.4.1.2011.6.139.11.1.83.6.1not-accessiblecurrent
hwWlanClusterACIndex
OBJECT-TYPE
This object indicates the index of hwWlanClusterACListInfo.
1.3.6.1.4.1.2011.6.139.11.1.83.6.1.1Unsigned32 (0..63)not-accessiblecurrent
hwWlanClusterACIPv4
OBJECT-TYPE
This object indicates the ipv4 address of the ac.
1.3.6.1.4.1.2011.6.139.11.1.83.6.1.2IpAddressread-onlycurrent
hwWlanClusterACIPv6
OBJECT-TYPE
This object indicates the ipv6 address of the ac.
1.3.6.1.4.1.2011.6.139.11.1.83.6.1.3OCTET STRINGread-onlycurrent
hwWlanClusterACRole
OBJECT-TYPE
This object indicates the role of the ac.
1.3.6.1.4.1.2011.6.139.11.1.83.6.1.4INTEGER {master(1), slave(2), backup(3)}read-onlycurrent
hwWlanClusterACType
OBJECT-TYPE
This object indicates the type of the ac.
1.3.6.1.4.1.2011.6.139.11.1.83.6.1.5OCTET STRINGread-onlycurrent
hwWlanClusterACVersion
OBJECT-TYPE
This object indicates the version of the ac.
1.3.6.1.4.1.2011.6.139.11.1.83.6.1.6OCTET STRINGread-onlycurrent
hwWlanClusterACStatus
OBJECT-TYPE
This object indicates the status of the ac.
1.3.6.1.4.1.2011.6.139.11.1.83.6.1.7INTEGER {down(1), up(2), pskmismatch(3), vermismatch(4), cfgmismatch(5), devmismatch(6), initial(7)}read-onlycurrent
hwWlanClusterACLastSynTime
OBJECT-TYPE
This object indicates the last synchronize time of the ac.
1.3.6.1.4.1.2011.6.139.11.1.83.6.1.8OCTET STRINGread-onlycurrent
hwWiredPortProfileTrafficFilterTable
OBJECT-TYPE
This table is used to configure QoS filter information.
1.3.6.1.4.1.2011.6.139.11.1.84not-accessiblecurrent
hwWiredPortProfileTrafficFilterEntry
OBJECT-TYPE
The indexes of this table are hwAPWiredPortProfileName, hwWiredPortProfileTrafficFilterID and hwWiredPortProfileTrafficFilterDirection.
1.3.6.1.4.1.2011.6.139.11.1.84.1not-accessiblecurrent
hwWiredPortProfileTrafficFilterDirection
OBJECT-TYPE
This object indicates the ACL rule direction for packet filtering in a wired port profile. This parameter has no default value.
1.3.6.1.4.1.2011.6.139.11.1.84.1.1INTEGER {inbound(1), outbound(2)}not-accessiblecurrent
hwWiredPortProfileTrafficFilterID
OBJECT-TYPE
This object indicates the ACL rule ID for packet filtering in a wired port profile. This parameter has no default value.
1.3.6.1.4.1.2011.6.139.11.1.84.1.2Unsigned32not-accessiblecurrent
hwWiredPortProfileTrafficFilterType
OBJECT-TYPE
This object indicates the ACL rule type for packet filtering in a wired port profile. This parameter has no default value.
1.3.6.1.4.1.2011.6.139.11.1.84.1.3INTEGER {ipv4(1), ipv6(2), l2(3), ipv4L2(4)}read-writecurrent
hwWiredPortProfileTrafficFilterACLNum1
OBJECT-TYPE
This object indicates the ACL rule for packet filtering in a wired port profile.
1.3.6.1.4.1.2011.6.139.11.1.84.1.4Integer32 (3000..3031 | 4000..4031)read-writecurrent
hwWiredPortProfileTrafficFilterACLNum2
OBJECT-TYPE
This object indicates the ACL rule for packet filtering in a wired port profile.
1.3.6.1.4.1.2011.6.139.11.1.84.1.5Integer32 (4000..4031)read-writecurrent
hwWiredPortProfileTrafficFilterRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.84.1.6RowStatusread-writecurrent
hwWiredPortProfileTrafficRemarkTable
OBJECT-TYPE
This table is used to configure QoS remark information.
1.3.6.1.4.1.2011.6.139.11.1.85not-accessiblecurrent
hwWiredPortProfileTrafficRemarkEntry
OBJECT-TYPE
The indexes of this table are hwAPWiredPortProfileName, hwWiredPortProfileTrafficRemarkDirection and hwWiredPortProfileTrafficRemarkID.
1.3.6.1.4.1.2011.6.139.11.1.85.1not-accessiblecurrent
hwWiredPortProfileTrafficRemarkDirection
OBJECT-TYPE
This object indicates the ACL rule direction for packet remarking in a wired port profile. This parameter has no default value.
1.3.6.1.4.1.2011.6.139.11.1.85.1.1INTEGER {inbound(1), outbound(2)}not-accessiblecurrent
hwWiredPortProfileTrafficRemarkID
OBJECT-TYPE
This object indicates the ACL rule ID for packet remarking in a wired port profile. This parameter has no default value.
1.3.6.1.4.1.2011.6.139.11.1.85.1.2Unsigned32not-accessiblecurrent
hwWiredPortProfileTrafficRemarkIPType
OBJECT-TYPE
This object indicates the ACL rule IP type for packet remarking in a wired port profile. This parameter has no default value.
1.3.6.1.4.1.2011.6.139.11.1.85.1.3INTEGER {ipv4(1), ipv6(2), l2(3), ipv4L2(4)}read-writecurrent
hwWiredPortProfileTrafficRemarkACLNum1
OBJECT-TYPE
This object indicates the ACL rule for packet remarking in a wired port profile.
1.3.6.1.4.1.2011.6.139.11.1.85.1.4Integer32 (3000..3031 | 4000..4031)read-writecurrent
hwWiredPortProfileTrafficRemarkACLNum2
OBJECT-TYPE
This object indicates the ACL rule for packet remarking in a wired port profile.
1.3.6.1.4.1.2011.6.139.11.1.85.1.5Integer32 (4000..4031)read-writecurrent
hwWiredPortProfileTrafficRemarkType
OBJECT-TYPE
This object indicates the ACL rule mask type for packet remarking in a wired port profile. This parameter has no default value.
1.3.6.1.4.1.2011.6.139.11.1.85.1.6INTEGER {dscp(1), dot1p(2)}read-writecurrent
hwWiredPortProfileTrafficRemarkValue
OBJECT-TYPE
This object indicates the ACL rule mask value for packet remarking in a wired port profile. This parameter has no default value.
1.3.6.1.4.1.2011.6.139.11.1.85.1.7Integer32 (0..63)read-writecurrent
hwWiredPortProfileTrafficRemarkRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.85.1.8RowStatusread-writecurrent
hwTrafficProfileTrafficFilterTable
OBJECT-TYPE
This table is used to configure QoS filter information.
1.3.6.1.4.1.2011.6.139.11.1.86not-accessiblecurrent
hwTrafficProfileTrafficFilterEntry
OBJECT-TYPE
The indexes of this table are hwAPTrafficProfileName, hwTrafficProfileTrafficFilterID and hwTrafficProfileTrafficFilterDirection.
1.3.6.1.4.1.2011.6.139.11.1.86.1not-accessiblecurrent
hwTrafficProfileTrafficFilterDirection
OBJECT-TYPE
This object indicates the ACL rule direction for packet filtering in a traffic profile. This parameter has no default value.
1.3.6.1.4.1.2011.6.139.11.1.86.1.1INTEGER {inbound(1), outbound(2)}not-accessiblecurrent
hwTrafficProfileTrafficFilterID
OBJECT-TYPE
This object indicates the ACL rule ID for packet filtering in a traffic profile. This parameter has no default value.
1.3.6.1.4.1.2011.6.139.11.1.86.1.2Unsigned32not-accessiblecurrent
hwTrafficProfileTrafficFilterTpye
OBJECT-TYPE
This object indicates the ACL rule type for packet filtering in a traffic profile. This parameter has no default value.
1.3.6.1.4.1.2011.6.139.11.1.86.1.3INTEGER {ipv4(1), ipv6(2), l2(3), ipv4L2(4)}read-writecurrent
hwTrafficProfileTrafficFilterACLNum1
OBJECT-TYPE
This object indicates the ACL rule for packet filtering in a traffic profile.
1.3.6.1.4.1.2011.6.139.11.1.86.1.4Integer32 (3000..3031 | 4000..4031 | 6000..6031)read-writecurrent
hwTrafficProfileTrafficFilterACLNum2
OBJECT-TYPE
This object indicates the ACL rule for packet filtering in a traffic profile.
1.3.6.1.4.1.2011.6.139.11.1.86.1.5Integer32 (4000..4031)read-writecurrent
hwTrafficProfileTrafficFilterRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.86.1.6RowStatusread-writecurrent
hwTrafficProfileTrafficRemarkTable
OBJECT-TYPE
This table is used to configure QoS remark information.
1.3.6.1.4.1.2011.6.139.11.1.87not-accessiblecurrent
hwTrafficProfileTrafficRemarkEntry
OBJECT-TYPE
The indexes of this table are hwAPTrafficProfileName, hwTrafficProfileTrafficRemarkDirection and hwTrafficProfileTrafficRemarkID.
1.3.6.1.4.1.2011.6.139.11.1.87.1not-accessiblecurrent
hwTrafficProfileTrafficRemarkDirection
OBJECT-TYPE
This object indicates the ACL rule direction for packet remarking in a traffic profile. This parameter has no default value.
1.3.6.1.4.1.2011.6.139.11.1.87.1.1INTEGER {inbound(1), outbound(2)}not-accessiblecurrent
hwTrafficProfileTrafficRemarkID
OBJECT-TYPE
This object indicates the ACL rule ID for packet remarking in a traffic profile. This parameter has no default value.
1.3.6.1.4.1.2011.6.139.11.1.87.1.2Unsigned32not-accessiblecurrent
hwTrafficProfileTrafficRemarkIPType
OBJECT-TYPE
This object indicates the ACL rule IP type for packet remarking in a traffic profile. This parameter has no default value.
1.3.6.1.4.1.2011.6.139.11.1.87.1.3INTEGER {ipv4(1), ipv6(2), l2(3), ipv4L2(4)}read-writecurrent
hwTrafficProfileTrafficRemarkACLNum1
OBJECT-TYPE
This object indicates the ACL rule for packet remarking in a traffic profile.
1.3.6.1.4.1.2011.6.139.11.1.87.1.4Integer32 (3000..3031 | 4000..4031 | 6000..6031)read-writecurrent
hwTrafficProfileTrafficRemarkACLNum2
OBJECT-TYPE
This object indicates the ACL rule for packet remarking in a traffic profile.
1.3.6.1.4.1.2011.6.139.11.1.87.1.5Integer32 (4000..4031)read-writecurrent
hwTrafficProfileTrafficRemarkType
OBJECT-TYPE
This object indicates the ACL rule mask type for packet remarking in a traffic profile. This parameter has no default value.
1.3.6.1.4.1.2011.6.139.11.1.87.1.6INTEGER {dscp(1), dot11e(3)}read-writecurrent
hwTrafficProfileTrafficRemarkValue
OBJECT-TYPE
This object indicates the ACL rule mask value for packet remarking in a traffic profile. This parameter has no default value.
1.3.6.1.4.1.2011.6.139.11.1.87.1.7Integer32 (0..63)read-writecurrent
hwTrafficProfileTrafficRemarkRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.87.1.8RowStatusread-writecurrent
hwWlanBranchGroupConfig
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.1.88
hwBranchGroupTable
OBJECT-TYPE
This table is used to configure branch group information.
1.3.6.1.4.1.2011.6.139.11.1.88.1not-accessiblecurrent
hwBranchGroupEntry
OBJECT-TYPE
The indexes of this table are hwBranchGroupName.
1.3.6.1.4.1.2011.6.139.11.1.88.1.1not-accessiblecurrent
hwBranchGroupName
OBJECT-TYPE
This object indicates the AP branch group name. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.88.1.1.1OCTET STRING (SIZE(1..35))not-accessiblecurrent
hwBranchGroupUserAccountNumber
OBJECT-TYPE
This object indicates the AP branch group name user accout number.
1.3.6.1.4.1.2011.6.139.11.1.88.1.1.2Integer32read-onlycurrent
hwBranchGroupAPNumber
OBJECT-TYPE
This object indicates the AP branch group name AP number.
1.3.6.1.4.1.2011.6.139.11.1.88.1.1.3Integer32read-onlycurrent
hwBranchGroupFileStatus
OBJECT-TYPE
This object indicates the AP branch group file status.
1.3.6.1.4.1.2011.6.139.11.1.88.1.1.4INTEGER {success(1), exception(2), none(3), loading(4), unload(5)}read-onlycurrent
hwBranchGroupServerCertFileType
OBJECT-TYPE
This object indicates the AP branch group Cert file type.
1.3.6.1.4.1.2011.6.139.11.1.88.1.1.5INTEGER {der(1), pem(3), na(4)}read-writecurrent
hwBranchGroupServerCertFileName
OBJECT-TYPE
This object indicates the AP branch group Cert file name.
1.3.6.1.4.1.2011.6.139.11.1.88.1.1.6OCTET STRING (SIZE(0..63))read-writecurrent
hwBranchGroupServerCAFileName
OBJECT-TYPE
This object indicates the AP branch group CA file name.
1.3.6.1.4.1.2011.6.139.11.1.88.1.1.7OCTET STRING (SIZE(0..63))read-writecurrent
hwBranchGroupServerPSKType
OBJECT-TYPE
This object indicates the AP branch group PSK type.
1.3.6.1.4.1.2011.6.139.11.1.88.1.1.8INTEGER {pem(1), pkcs12(2), der(3), na(4)}read-writecurrent
hwBranchGroupServerPSKFileName
OBJECT-TYPE
This object indicates the AP branch group PSK file name.
1.3.6.1.4.1.2011.6.139.11.1.88.1.1.9OCTET STRING (SIZE(0..63))read-writecurrent
hwBranchGroupServerPSKPassword
OBJECT-TYPE
This object indicates the AP branch group PSK file password.
1.3.6.1.4.1.2011.6.139.11.1.88.1.1.10OCTET STRING (SIZE(1..63))read-writecurrent
hwBranchGroupFileLoadOper
OBJECT-TYPE
This object indicates the AP branch group file load oper.
1.3.6.1.4.1.2011.6.139.11.1.88.1.1.11INTEGER {start(1), cancel(2)}read-writecurrent
hwBranchGroupFileLoadPercent
OBJECT-TYPE
This object indicates the AP branch group file load percent.
1.3.6.1.4.1.2011.6.139.11.1.88.1.1.12Integer32read-onlycurrent
hwBranchGroupFileLoadFailedAP
OBJECT-TYPE
This object indicates the AP branch group file failed AP.
1.3.6.1.4.1.2011.6.139.11.1.88.1.1.13Integer32read-onlycurrent
hwBranchGroupRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.88.1.1.14RowStatusread-writecurrent
hwAPBranchGroupFileTable
OBJECT-TYPE
This table is used to get branh group file load status.
1.3.6.1.4.1.2011.6.139.11.1.88.2not-accessiblecurrent
hwAPBranchGroupFileEntry
OBJECT-TYPE
The indexes of this table are hwBranchGroupName and hwWlanApMac.
1.3.6.1.4.1.2011.6.139.11.1.88.2.1not-accessiblecurrent
hwAPBranchGroupFileStatus
OBJECT-TYPE
This object indicates the branch group file load status.
1.3.6.1.4.1.2011.6.139.11.1.88.2.1.1INTEGER {normal(1), unload(2), loading(3), loadfailcancel(4), loadfailwriteflashfail(5), loadfailfilenotexist(6), loadfailtimeout(7), loadfailexception(8), loadfileabnormalfile(9), na(10)}read-onlycurrent
hwWlanNaviACManagement
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.1.89
hwWlanNaviACLocalTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.89.1not-accessiblecurrent
hwWlanNaviACLocalEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.89.1.1not-accessiblecurrent
hwWlanNaviRemoteACID
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.89.1.1.1Integer32not-accessiblecurrent
hwWlanNaviRemoteACIPv4
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.89.1.1.2IpAddressread-writecurrent
hwWlanNaviRemoteACIPv6
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.89.1.1.3OCTET STRINGread-writecurrent
hwWlanNaviRemoteACDescription
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.89.1.1.4OCTET STRING (SIZE(0..31))read-writecurrent
hwWlanNaviRemoteACState
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.89.1.1.5INTEGER {fault(1), vmiss(2), normal(3)}read-onlycurrent
hwWlanNaviRemoteACMac
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.89.1.1.6MacAddressread-onlycurrent
hwWlanNaviRemoteACStaNumber
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.89.1.1.7Integer32read-onlycurrent
hwWlanNaviRemoteACRowStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.89.1.1.8RowStatusread-writecurrent
hwWlanNaviACRemoteManagement
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.1.89.2
hwWlanNaviACRemoteEnable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.89.2.1INTEGER {disable(1), enable(2)}read-writecurrent
hwWlanNaviACRemoteTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.89.3not-accessiblecurrent
hwWlanNaviACRemoteEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.89.3.1not-accessiblecurrent
hwWlanNaviLocalACID
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.89.3.1.1Integer32not-accessiblecurrent
hwWlanNaviLocalACIPv4
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.89.3.1.2IpAddressread-writecurrent
hwWlanNaviLocalACIPv6
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.89.3.1.3OCTET STRINGread-writecurrent
hwWlanNaviLocalACDescription
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.89.3.1.4OCTET STRING (SIZE(0..31))read-writecurrent
hwWlanNaviLocalACState
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.89.3.1.5INTEGER {fault(1), vmiss(2), normal(3)}read-onlycurrent
hwWlanNaviLocalACMac
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.89.3.1.6MacAddressread-onlycurrent
hwWlanNaviLocalACStaNumber
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.89.3.1.7Integer32read-onlycurrent
hwWlanNaviLocalACRowStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.89.3.1.8RowStatusread-writecurrent
hwWlanNaviACVapTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.89.4not-accessiblecurrent
hwWlanNaviACVapEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.89.4.1not-accessiblecurrent
hwWlanNaviVapACWlanId
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.89.4.1.1Unsigned32 (1..16)not-accessiblecurrent
hwWlanNaviVapProfileName
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.89.4.1.2OCTET STRING (SIZE(1..35))read-writecurrent
hwWlanNaviVapRowStatus
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.89.4.1.3RowStatusread-writecurrent
hwHighwayObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.1.90
hwHighwayProfileTable
OBJECT-TYPE
This table is used to configure highway profile information.
1.3.6.1.4.1.2011.6.139.11.1.90.1not-accessiblecurrent
hwHighwayProfileEntry
OBJECT-TYPE
The indexes of this table are hwHighwayProfileName.
1.3.6.1.4.1.2011.6.139.11.1.90.1.1not-accessiblecurrent
hwHighwayProfileName
OBJECT-TYPE
This object indicates the Highway Profile name. It is the index of the table.
1.3.6.1.4.1.2011.6.139.11.1.90.1.1.1OCTET STRING (SIZE(1..35))read-writecurrent
hwHighwayStationMinSpeed
OBJECT-TYPE
This object indicates the minimum movement speed of a STA, in km/h. The default value is 36.
1.3.6.1.4.1.2011.6.139.11.1.90.1.1.2Integer32 (4..216)read-writecurrent
hwHighwayProfileRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.90.1.1.10RowStatusread-writecurrent
hwHighwayApMemberTable
OBJECT-TYPE
This table is used to set highway member.
1.3.6.1.4.1.2011.6.139.11.1.90.2not-accessiblecurrent
hwHighwayApMemberEntry
OBJECT-TYPE
The indexes of this table are hwHighwayApMemberTable .
1.3.6.1.4.1.2011.6.139.11.1.90.2.1not-accessiblecurrent
hwHighwayRadioType
OBJECT-TYPE
This object indicates radiotype.
1.3.6.1.4.1.2011.6.139.11.1.90.2.1.1INTEGER {radio2G(1), radio5G(2)}read-writecurrent
hwHighwayDirection
OBJECT-TYPE
This object indicates direction.
1.3.6.1.4.1.2011.6.139.11.1.90.2.1.2INTEGER {positive(1), reverse(2)}read-writecurrent
hwHighwayMemberType
OBJECT-TYPE
This object indicates member type.
1.3.6.1.4.1.2011.6.139.11.1.90.2.1.3INTEGER {start(1), middle(2), end(3)}read-writecurrent
hwHighwayMemberName
OBJECT-TYPE
This object indicates member name.
1.3.6.1.4.1.2011.6.139.11.1.90.2.1.4OCTET STRING (SIZE(1..63))read-writecurrent
hwHighwayDeloyType
OBJECT-TYPE
This object indicates member deloy type.
1.3.6.1.4.1.2011.6.139.11.1.90.2.1.5INTEGER {b2b(1), f2f(2)}read-writecurrent
hwHighwayNextMemberName
OBJECT-TYPE
This object indicates member name.
1.3.6.1.4.1.2011.6.139.11.1.90.2.1.6OCTET STRING (SIZE(0..63))read-writecurrent
hwHighwayMinRoamDistance
OBJECT-TYPE
This object indicates member min roam distance.
1.3.6.1.4.1.2011.6.139.11.1.90.2.1.7Integer32 (0..2000)read-writecurrent
hwHighwayMaxRoamDistance
OBJECT-TYPE
This object indicates member max roam distance.
1.3.6.1.4.1.2011.6.139.11.1.90.2.1.8Integer32 (0..2000)read-writecurrent
hwHighwayMemberStatus
OBJECT-TYPE
This object indicates member status.
1.3.6.1.4.1.2011.6.139.11.1.90.2.1.9INTEGER {notExist(1), abnormal(2), normal(3), notConfig(4), other(5)}read-onlycurrent
hwHighwayMemberRowStatus
OBJECT-TYPE
This object indicates the highway member status.
1.3.6.1.4.1.2011.6.139.11.1.90.2.1.15RowStatusread-writecurrent
hwWmiProfileTable
OBJECT-TYPE
This table is used to get and set the wmi server profile attributes.
1.3.6.1.4.1.2011.6.139.11.1.91not-accessiblecurrent
hwWmiProfileEntry
OBJECT-TYPE
The indexes of this table is hwWmiServerProfileName.
1.3.6.1.4.1.2011.6.139.11.1.91.1not-accessiblecurrent
hwWmiServerProfileName
OBJECT-TYPE
This object indicates the wmi server profile name.
1.3.6.1.4.1.2011.6.139.11.1.91.1.1OCTET STRINGnot-accessiblecurrent
hwWmiServerIPv4
OBJECT-TYPE
This object indicates the server IPv4 address attribute of this wmi server profile.
1.3.6.1.4.1.2011.6.139.11.1.91.1.2IpAddressread-writecurrent
hwWmiServerPort
OBJECT-TYPE
This object indicates the server port number attribute of this wmi server profile.
1.3.6.1.4.1.2011.6.139.11.1.91.1.3Unsigned32 (0 | 1..65535)read-writecurrent
hwWmiReportInterval
OBJECT-TYPE
This object indicates the report interval attribute of this wmi server profile. The default report interval is 60s.
1.3.6.1.4.1.2011.6.139.11.1.91.1.4Unsigned32 (10..300)read-writecurrent
hwWmiKeepAliveInterval
OBJECT-TYPE
This object indicates the keep alive interval attribute of this wmi server profile. The default report interval is 3min.
1.3.6.1.4.1.2011.6.139.11.1.91.1.5Unsigned32 (1..60)read-writecurrent
hwWmiRetryConnectionInterval
OBJECT-TYPE
This object indicates the retry connection interval attribute of this wmi server profile. The default report interval is 5min.
1.3.6.1.4.1.2011.6.139.11.1.91.1.6Unsigned32 (5..60)read-writecurrent
hwWmiRetryConnectionCnt
OBJECT-TYPE
This object indicates the retry connection times attribute of this wmi server profile. The default retry times is 0, which means it will alway trys to reconnect.
1.3.6.1.4.1.2011.6.139.11.1.91.1.7Unsigned32read-writecurrent
hwWmiMaxPacketSize
OBJECT-TYPE
This object indicates the max report packet size attribute of this wmi server profile. The default max report packet size is 5KB.
1.3.6.1.4.1.2011.6.139.11.1.91.1.8Unsigned32 (4..256)read-writecurrent
hwWmiDeviceDataInterval
OBJECT-TYPE
This object indicates the device date collecting interval attribute of this wmi server profile. The default collecting interval is 10s.
1.3.6.1.4.1.2011.6.139.11.1.91.1.9Unsigned32 (0 | 5..1800)read-writecurrent
hwWmiSsidDataInterval
OBJECT-TYPE
This object indicates the ssid date collecting interval attribute of this wmi server profile. The default collecting interval is 60s.
1.3.6.1.4.1.2011.6.139.11.1.91.1.10Unsigned32 (0 | 5..1800)read-writecurrent
hwWmiRadioDataInterval
OBJECT-TYPE
This object indicates the radio date collecting interval attribute of this wmi server profile. The default collecting interval is 10s.
1.3.6.1.4.1.2011.6.139.11.1.91.1.11Unsigned32 (0 | 5..1800)read-writecurrent
hwWmiInterfaceDataInterval
OBJECT-TYPE
This object indicates the interface date collecting interval attribute of this wmi server profile. The default collecting interval is 60s.
1.3.6.1.4.1.2011.6.139.11.1.91.1.12Unsigned32 (0 | 5..1800)read-writecurrent
hwWmiTerminalDataInterval
OBJECT-TYPE
This object indicates the terminal date collecting interval attribute of this wmi server profile. The default collecting interval is 10s.
1.3.6.1.4.1.2011.6.139.11.1.91.1.13Unsigned32 (0 | 5..1800)read-writecurrent
hwWmiLogDataInterval
OBJECT-TYPE
This object indicates the log date collecting interval attribute of this wmi server profile. The default collecting interval is 300s.
1.3.6.1.4.1.2011.6.139.11.1.91.1.14Unsigned32 (0 | 5..1800)read-writecurrent
hwWmiLocationDataInterval
OBJECT-TYPE
This object indicates the location date collecting interval attribute of this wmi server profile. The default collecting interval is 60s.
1.3.6.1.4.1.2011.6.139.11.1.91.1.15Unsigned32 (0 | 5..1800)read-writecurrent
hwWmiSecurityDataInterval
OBJECT-TYPE
This object indicates the wids date collecting interval attribute of this wmi server profile. The default collecting interval is 300s.
1.3.6.1.4.1.2011.6.139.11.1.91.1.16Unsigned32 (0 | 5..1800)read-writecurrent
hwWmiRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.91.1.17RowStatusread-writecurrent
hwWmiNeighborDataInterval
OBJECT-TYPE
This object indicates the neighbor date collecting interval attribute of this wmi server profile. The default collecting interval is 60s.
1.3.6.1.4.1.2011.6.139.11.1.91.1.18Unsigned32 (0 | 5..1800)read-writecurrent
hwWmiCpcarDataInterval
OBJECT-TYPE
This object indicates the CP-CAR date collecting interval attribute of this wmi server profile. The default collecting interval is 300s.
1.3.6.1.4.1.2011.6.139.11.1.91.1.19Unsigned32 (0 | 5..1800)read-writecurrent
hwWmiEmdiDataInterval
OBJECT-TYPE
This object indicates the enhanced media delivery index date collecting interval attribute of this wmi server profile. The default collecting interval is 10s.
1.3.6.1.4.1.2011.6.139.11.1.91.1.20Unsigned32 (0 | 5..1800)read-writecurrent
hwWmiApplicationStatisticsDataInterval
OBJECT-TYPE
Configure the WMI application statistics data report interval, the default collecting interval is 300s
1.3.6.1.4.1.2011.6.139.11.1.91.1.21Unsigned32 (0 | 5..1800)read-writecurrent
hwWmiLogModuleist
OBJECT-TYPE
This object indicates the log module list. For example, ff5a0000,ff630000,ffd10000. Setting this object to 0 indicates the deletion operation.
1.3.6.1.4.1.2011.6.139.11.1.91.1.22OCTET STRINGread-writecurrent
hwWmiTerminalDhcpOptionDataInterval
OBJECT-TYPE
This object indicates the terminal Dhcp Option date collecting interval attribute of this wmi server profile. The default collecting interval is 300s.
1.3.6.1.4.1.2011.6.139.11.1.91.1.23Unsigned32 (0 | 5..1800)read-writecurrent
hwWmiTerminalHttpUaDataInterval
OBJECT-TYPE
This object indicates the terminal Http Ua date collecting interval attribute of this wmi server profile. The default collecting interval is 300s.
1.3.6.1.4.1.2011.6.139.11.1.91.1.24Unsigned32 (0 | 5..1800)read-writecurrent
hwWmiTerminalMdnsDataInterval
OBJECT-TYPE
This object indicates the terminal Mdns date collecting interval attribute of this wmi server profile. The default collecting interval is 300s.
1.3.6.1.4.1.2011.6.139.11.1.91.1.25Unsigned32 (0 | 5..1800)read-writecurrent
hwWmiNonWifiDataInterval
OBJECT-TYPE
This object indicates the non-wifi data collecting interval attribute of this wmi server profile. The default collecting interval is 60s.
1.3.6.1.4.1.2011.6.139.11.1.91.1.26Unsigned32 (0 | 5..1800)read-writecurrent
hwWmiRadioPerformanceInterval
OBJECT-TYPE
This object indicates the radio performance data collecting interval attribute of this wmi server profile. The default collecting interval is 300s.
1.3.6.1.4.1.2011.6.139.11.1.91.1.27Unsigned32 (0 | 60..1800)read-writecurrent
hwWmiSsidCapacityInterval
OBJECT-TYPE
This object indicates the ssid capacity data collecting interval attribute of this wmi server profile. The default collecting interval is 300s.
1.3.6.1.4.1.2011.6.139.11.1.91.1.28Unsigned32 (0 | 60..1800)read-writecurrent
hwWmiTerminalCapacityInterval
OBJECT-TYPE
This object indicates the terminal capacity data collecting interval attribute of this wmi server profile. The default collecting interval is 300s.
1.3.6.1.4.1.2011.6.139.11.1.91.1.29Unsigned32 (0 | 60..1800)read-writecurrent
hwApSystemWmiProfileTable
OBJECT-TYPE
This table is used to bind the wmi server to the ap system profile by indexed and get binding status.
1.3.6.1.4.1.2011.6.139.11.1.92not-accessiblecurrent
hwApSystemWmiProfileEntry
OBJECT-TYPE
The indexes of this table is hwAPSystemProfName and hwApSystemWmiIndex.
1.3.6.1.4.1.2011.6.139.11.1.92.1not-accessiblecurrent
hwApSystemWmiIndex
OBJECT-TYPE
This object indicates the channel index which the wmi server will bind to.
1.3.6.1.4.1.2011.6.139.11.1.92.1.1Unsigned32not-accessiblecurrent
hwApSystemWmiProfile
OBJECT-TYPE
This object indicates the wmi server which will bind to the ap system profile.
1.3.6.1.4.1.2011.6.139.11.1.92.1.2OCTET STRING (SIZE(0..35))read-writecurrent
hwApSystemWmiRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.92.1.3RowStatusread-writecurrent
hwSysWmiConfigTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93not-accessiblecurrent
hwSysWmiConfigEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1not-accessiblecurrent
hwSysWmiIndex
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1.1Unsigned32not-accessiblecurrent
hwSysWmiServerIPv4
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1.2IpAddressread-writecurrent
hwSysWmiServerPort
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1.3Unsigned32 (0 | 1..65535)read-writecurrent
hwSysWmiReportInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1.4Unsigned32 (10..300)read-writecurrent
hwSysWmiKeepAliveInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1.5Unsigned32 (1..60)read-writecurrent
hwSysWmiRetryConnectionInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1.6Unsigned32 (5..60)read-writecurrent
hwSysWmiRetryConnectionCnt
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1.7Unsigned32read-writecurrent
hwSysWmiMaxPacketSize
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1.8Unsigned32 (4..256)read-writecurrent
hwSysWmiDeviceDataInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1.9Unsigned32 (0 | 5..1800)read-writecurrent
hwSysWmiSsidDataInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1.10Unsigned32 (0 | 5..1800)read-writecurrent
hwSysWmiRadioDataInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1.11Unsigned32 (0 | 5..1800)read-writecurrent
hwSysWmiInterfaceDataInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1.12Unsigned32 (0 | 5..1800)read-writecurrent
hwSysWmiTerminalDataInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1.13Unsigned32 (0 | 5..1800)read-writecurrent
hwSysWmiLogDataInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1.14Unsigned32 (0 | 5..1800)read-writecurrent
hwSysWmiLocationDataInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1.15Unsigned32 (0 | 5..1800)read-writecurrent
hwSysWmiSecurityDataInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1.16Unsigned32 (0 | 5..1800)read-writecurrent
hwSysWmiRoamDataInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1.17Unsigned32 (0 | 5..1800)read-writecurrent
hwSysWmiApplicationStatisticsDataInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1.18Unsigned32 (0 | 5..1800)read-writecurrent
hwSysWmiEmdiDataInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1.19Unsigned32 (0 | 5..1800)read-writecurrent
hwSysWmiCpcarDataInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1.20Unsigned32 (0 | 5..1800)read-writecurrent
hwSysWmiNeighborDataInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1.21Unsigned32 (0 | 5..1800)read-writecurrent
hwSysWmiLogMIDList
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1.22OCTET STRINGread-writecurrent
hwSysWmiTerminalDhcpOptionDataInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1.23Unsigned32 (0 | 5..1800)read-writecurrent
hwSysWmiTerminalHttpUaDataInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1.24Unsigned32 (0 | 5..1800)read-writecurrent
hwSysWmiTerminalMdnsDataInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1.25Unsigned32 (0 | 5..1800)read-writecurrent
hwSysWmiMeshDataInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.11.1.93.1.26Unsigned32 (0 | 5..1800)read-writecurrent
hwWlanLicenseCentralizedTable
OBJECT-TYPE
This table is used to get the information of license pool.
1.3.6.1.4.1.2011.6.139.11.1.94not-accessiblecurrent
hwWlanLicenseCentralizedEntry
OBJECT-TYPE
The indexes of this table is hwWlanLicenseClientMac.
1.3.6.1.4.1.2011.6.139.11.1.94.1not-accessiblecurrent
hwWlanLicenseClientMac
OBJECT-TYPE
This object indicates the mac-address of license centralized client.
1.3.6.1.4.1.2011.6.139.11.1.94.1.1MacAddressnot-accessiblecurrent
hwWlanLicenseClientIPv4Addr
OBJECT-TYPE
This object indicates the ipv4 address of license client.
1.3.6.1.4.1.2011.6.139.11.1.94.1.2IpAddressread-onlycurrent
hwWlanLicenseClientIPv6Addr
OBJECT-TYPE
This object indicates the ipv6 address of license client.
1.3.6.1.4.1.2011.6.139.11.1.94.1.3OCTET STRINGread-onlycurrent
hwWlanLicenseClientRole
OBJECT-TYPE
This object indicates the current role of license client.
1.3.6.1.4.1.2011.6.139.11.1.94.1.4INTEGER {server(1), serverBackup(2), client(3)}read-onlycurrent
hwWlanLicenseClientState
OBJECT-TYPE
This object indicates the state of license client.
1.3.6.1.4.1.2011.6.139.11.1.94.1.5INTEGER {fault(1), normal(2)}read-onlycurrent
hwWlanLicenseClientLocalLicense
OBJECT-TYPE
This object indicates the number of local license in license client.
1.3.6.1.4.1.2011.6.139.11.1.94.1.6Unsigned32read-onlycurrent
hwWlanLicenseClientLicenseRemain
OBJECT-TYPE
This object indicates the remain days of license client.
1.3.6.1.4.1.2011.6.139.11.1.94.1.7Unsigned32read-onlycurrent
hwWlanLicenseClientAllocedLicense
OBJECT-TYPE
This object indicates the alloced license of license client.
1.3.6.1.4.1.2011.6.139.11.1.94.1.8Unsigned32read-onlycurrent
hwApSysBCMCSuppressionTable
OBJECT-TYPE
This table is used to configure ap broadcast and multicast suppression information.
1.3.6.1.4.1.2011.6.139.11.1.95not-accessiblecurrent
hwApSysBCMCSuppressionEntry
OBJECT-TYPE
The indexes of this table are hwApSystemProfName, hwApSysBCMCSuppressionPktType.
1.3.6.1.4.1.2011.6.139.11.1.95.1not-accessiblecurrent
hwApSysBCMCSuppressionPktType
OBJECT-TYPE
This object indicates the packet type of the ap broadcast and multicast suppression function. This parameter has no default value.
1.3.6.1.4.1.2011.6.139.11.1.95.1.1INTEGER {otherBroadcast(1), arp(2), igmp(3), nd(4), dhcp(5), dhcpv6(6), mdns(7), otherMulticast(8)}not-accessiblecurrent
hwApSysBCMCSuppressionSwitch
OBJECT-TYPE
This object indicates the status of the ap broadcast and multicast suppression function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.95.1.2INTEGER {disable(1), enable(2)}read-writecurrent
hwApSysBCMCSuppressionThreshold
OBJECT-TYPE
This object indicates the broadcast and multicast suppression threshold for the AP. The default value is 256 pps, otherBroadcast and otherMulticast is 16pps.
1.3.6.1.4.1.2011.6.139.11.1.95.1.3Unsigned32 (0..1024)read-writecurrent
hwApSysBCMCSuppressionRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.95.1.4RowStatusread-createcurrent
hwVAPProfileAntiAttackTable
OBJECT-TYPE
This table is used to configure vap anti-attack information.
1.3.6.1.4.1.2011.6.139.11.1.96not-accessiblecurrent
hwVAPProfileAntiAttackEntry
OBJECT-TYPE
The indexes of this table are hwVapProfileName, hwVAPProfileAntiAttackPacketType
1.3.6.1.4.1.2011.6.139.11.1.96.1not-accessiblecurrent
hwVAPProfileAntiAttackPacketType
OBJECT-TYPE
This object indicates the packet type of the VAP anti-attack flood function.This parameter has no default value.
1.3.6.1.4.1.2011.6.139.11.1.96.1.1INTEGER {otherBroadcast(1), arp(2), igmp(3), nd(4), dhcp(5), dhcpv6(6), mdns(7), otherMulticast(8)}not-accessiblecurrent
hwVAPProfileAntiAttackSwitch
OBJECT-TYPE
This object indicates the status of the VAP anti-attack flood function. The default value is 2.
1.3.6.1.4.1.2011.6.139.11.1.96.1.2INTEGER {disable(1), enable(2)}read-writecurrent
hwVAPProfileAntiAttackStaRateThreshold
OBJECT-TYPE
This object indicates the anti-attack flood sta-rate-threshold for the VAP. The default value is related to the protocol type. arp:4(pps), nd:8(pps), igmp:4(pps), dhcp:4(pps), dhcpv6:4(pps), mdns:4(pps), other multicast:10(pps), other boradcast:10(pps).
1.3.6.1.4.1.2011.6.139.11.1.96.1.3Unsigned32 (1..5000)read-writecurrent
hwVAPProfileAntiAttackBlacklistSwitch
OBJECT-TYPE
This object indicates the status of the VAP anti-attack ARP flood blacklist function. The default value is 1.
1.3.6.1.4.1.2011.6.139.11.1.96.1.4INTEGER {disable(1), enable(2)}read-writecurrent
hwVAPProfileAntiAttackRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.96.1.5RowStatusread-createcurrent
hwApProfStationConnectivityDetectStaMacTable
OBJECT-TYPE
This table is used to configure Station Connectivity Detect Mac.
1.3.6.1.4.1.2011.6.139.11.1.97not-accessiblecurrent
hwApProfStationConnectivityDetectStaMacEntry
OBJECT-TYPE
The indexes of this table are hwApSystemProfName and hwApProfStationConnectivityDetectStaMac.
1.3.6.1.4.1.2011.6.139.11.1.97.1not-accessiblecurrent
hwApProfStationConnectivityDetectStaMac
OBJECT-TYPE
This object indicates the connectivity detect station mac, MAX number is 8
1.3.6.1.4.1.2011.6.139.11.1.97.1.1MacAddressnot-accessiblecurrent
hwApProfStationConnectivityDetectStaMacRowStatus
OBJECT-TYPE
This object indicates the row status of this table. ROWSTATUS_CREATEANDGO and ROWSTATUS_DESTROY are commonly used.
1.3.6.1.4.1.2011.6.139.11.1.97.1.2RowStatusread-writecurrent
hwWlanConfigConformance
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.2
hwWlanConfigCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.2.1
hwWlanConfigObjectGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.11.2.2

Conformance

NameOIDStatus
hwWlanConfigCompliance
MODULE-COMPLIANCE
Description.
1.3.6.1.4.1.2011.6.139.11.2.1.1current
hwWlanGlobalConfigGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.1current
hwApAuthObjectsGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.2current
hwAPGroupGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.3current
hwAPGroupWiredPortGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.4current
hwAPGroupRadioGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.5current
hwAPGroupVapGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.6current
hwAPSpecificGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.7current
hwAPSpecificWiredPortGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.8current
hwAPSpecificRadioGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.9current
hwAPSpecificVapGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.10current
hwRegulatoryDomainProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.11current
hwApSystemProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.12current
hwAPWiredPortProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.13current
hwAPPortLinkProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.14current
hw2gRadioProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.15current
hw5gRadioProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.16current
hwRrmProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.17current
hwAirScanProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.18current
hwVapProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.19current
hwSsidProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.20current
hwSecurityProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.21current
hwAPTrafficProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.22current
hwWlanVlanPoolGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.23current
hwStaWhitelistProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.24current
hwStaBlacklistProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.25current
hwWidsProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.26current
hwWidsSpoofProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.30current
hwWidsWhitelistProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.31current
hwMeshProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.32current
hwMeshWhitelistProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.33current
hwMeshHandoverProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.34current
hwWdsProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.35current
hwWdsWhitelistProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.36current
hwLocationProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.37current
hwHotspot2ProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.39current
hwCellularNetworkProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.40current
hwConnectionCapabilityProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.41current
hwOperatorNameProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.42current
hwOperatorClassProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.43current
hwOperatorDomainNameProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.44current
hwNAIRealmProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.45current
hwVenueNameProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.46current
hwRoamingConsortiumProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.47current
hwSACProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.48current
hwSACProfActionGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.49current
hwAPProvisionGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.50current
hwWlanRadioCalibrateManagementGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.51current
hwWlanMobilityGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.52current
hwWlanLanguageGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.53current
hwFatApConfigGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.54current
hwWidsSpoofProfileListGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.55current
hwWidsWhitelistProfileListGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.56current
hwWlanLoadBalanceStaticGroupGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.57current
hwWlanLoadBalanceStaticGroupMemberGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.58current
hwWlanCountryCodeGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.59current
hwUccProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.60current
hwSoftgreProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.61current
hwBleProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.66current
hwAPGroupCardGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.67current
hwAPSpecificCardGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.68current
hwIoTSerialProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.69current
hwIoTProfileGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.70current
hwIoTProfileManagementServerGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.71current
hwVapAntiAttackUserDefFloodGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.79current
hwBranchGroupGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.88current
hwApSysBCMCSuppressionGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.95current
hwVAPProfileAntiAttackGroups
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.11.2.2.96current