MIBs Depot

HUAWEI-WLAN-AP-MIB

Registered at
1.3.6.1.4.1.2011.6.139.13
Last updated
2020-08-10 19:34
Organization
Huawei Technologies Co.,Ltd.
Revisions
2020-08-10 19:34, 2020-08-06 19:34, 2020-07-27 10:32, 2020-07-03 14:44, 2020-06-28 11:09, 2020-05-18 20:06, 2020-03-30 18:56, 2020-03-19 17:30, 2020-01-21 14:40, 2020-01-15 22:21, 2019-10-28 13:55, 2019-10-26 14:54, 2019-10-26 09:54, 2019-08-16 20:00, 2019-07-19 18:51, 2019-07-09 15:00, 2019-06-05 11:00, 2019-06-04 11:00, 2019-05-06 11:00, 2019-04-16 11:00, 2019-03-18 09:00, 2019-03-14 12:00, 2019-01-24 20:34, 2018-12-27 22:00, 2018-12-20 14:30, 2018-11-06 16:25, 2018-10-24 16:25, 2018-10-22 17:20, 2018-10-09 19:27, 2018-09-25 17:00, 2018-09-12 17:00, 2018-07-10 12:43, 2018-05-17 22:00, 2018-05-08 23:21, 2018-03-05 15:52, 2018-02-01 20:52, 2017-12-26 20:52, 2017-12-18 11:00, 2017-12-07 12:30, 2017-10-09 21:30, 2017-08-17 21:30, 2017-03-27 14:52, 2016-11-22 09:09, 2016-09-27 16:28, 2016-09-18 09:19, 2016-08-12 15:50, 2016-07-14 15:42, 2016-06-02 10:14, 2016-06-01 14:49, 2016-05-23 10:42, 2016-05-03 11:55, 2016-04-18 14:07, 2016-02-24 15:37, 2016-02-16 16:35, 2016-02-16 15:17, 2016-01-12 15:17, 2015-12-23 11:53, 2015-12-18 09:32, 2015-12-17 20:38, 2015-12-08 18:56, 2015-11-12 15:03, 2015-10-19 11:23, 2015-10-12 11:23, 2015-09-16 13:52, 2015-08-26 10:30, 2015-08-05 10:30, 2015-07-22 15:04, 2015-06-02 11:20, 2015-05-14 10:30, 2015-05-11 10:30, 2015-04-11 10:30, 2015-03-16 10:30, 2015-03-10 20:30, 2015-02-02 09:50
Namespace
huawei
Source file
HUAWEI-WLAN-AP-MIB
Digest
sha256:0b24ba071281c32ddd9e497752e9a4520f6d12bcd894f4f8429603aad3665c7b

Description

V1.73, update the value of hwApPowerInsufficientTrap, hwApPowerInsufficientResumeTrap, hwWlanAPPoeWorkmode, hwWlanAPPoeWorkmode, hwWlanIDIndexedAPPoeWorkmode, hwWlanIDIndexedAPPoeExpectedWorkmode

Contact

Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com

Imports

FromSymbols
HUAWEI-WLAN-MIBhwWlan
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION

Imported by

5 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HUAWEI-MIB
HUAWEI-WLAN-AP-MIB
HUAWEI-WLAN-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hwWlanApTrapInfo
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.13.1
hwWlanApTrap
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.13.1.1
hwWlanApTrapObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.13.1.2
hwWlanApActualType
OBJECT-TYPE
AP type.
1.3.6.1.4.1.2011.6.139.13.1.2.1OCTET STRINGread-onlycurrent
hwWlanApCpuOccupancyRate
OBJECT-TYPE
AP CPU usage.
1.3.6.1.4.1.2011.6.139.13.1.2.2Integer32read-onlycurrent
hwWlanApMemoryOccupancyRate
OBJECT-TYPE
AP memory usage.
1.3.6.1.4.1.2011.6.139.13.1.2.3Integer32read-onlycurrent
hwWlanApPermitStaNum
OBJECT-TYPE
The number of STAs allowed to associate with an AP.
1.3.6.1.4.1.2011.6.139.13.1.2.4Integer32read-onlycurrent
hwWlanStaAuthFailCause
OBJECT-TYPE
The cause of the STA authentication failure.
1.3.6.1.4.1.2011.6.139.13.1.2.5Integer32read-onlycurrent
hwWlanAcSystemSwitchType
OBJECT-TYPE
The active/standby switchover type.
1.3.6.1.4.1.2011.6.139.13.1.2.6Integer32read-onlycurrent
hwWlanApOpticalRxPower
OBJECT-TYPE
Receive power of an AP's optical module.
1.3.6.1.4.1.2011.6.139.13.1.2.7Integer32read-onlycurrent
hwWlanApOpticalTemperature
OBJECT-TYPE
The temperature of an AP's optical module.
1.3.6.1.4.1.2011.6.139.13.1.2.8Integer32read-onlycurrent
hwWlanApCfgCountryCode
OBJECT-TYPE
Country code.
1.3.6.1.4.1.2011.6.139.13.1.2.9OCTET STRINGread-onlycurrent
hwWlanApArpAttackSrcMac
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.13.1.2.10MacAddressread-onlycurrent
hwWlanApArpAttackDstMac
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.13.1.2.11MacAddressread-onlycurrent
hwWlanApArpAttackSrcIP
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.13.1.2.12IpAddressread-onlycurrent
hwWlanApArpCfgRateThreshold
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.13.1.2.13Integer32read-onlycurrent
hwWlanApArpActualRate
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.13.1.2.14Integer32read-onlycurrent
hwWlanApNotifyRadioId
OBJECT-TYPE
Radio ID used to report alarms.
1.3.6.1.4.1.2011.6.139.13.1.2.15Integer32read-onlycurrent
hwWlanApNotifyOrRestoreTemperature
OBJECT-TYPE
AP temperature.
1.3.6.1.4.1.2011.6.139.13.1.2.16Integer32read-onlycurrent
hwWlanOccurTime
OBJECT-TYPE
Occurrence time.
1.3.6.1.4.1.2011.6.139.13.1.2.17OCTET STRINGread-onlycurrent
hwWlanApBootNotifyName
OBJECT-TYPE
AP restart alarm name.
1.3.6.1.4.1.2011.6.139.13.1.2.18OCTET STRINGread-onlycurrent
hwWlanApFaultTimes
OBJECT-TYPE
The number of AP failures.
1.3.6.1.4.1.2011.6.139.13.1.2.19Integer32read-onlycurrent
hwWlanApUnAuthorizedApRecordNumber
OBJECT-TYPE
This object indicates that unauthorized AP alarms exist.
1.3.6.1.4.1.2011.6.139.13.1.2.20Integer32read-onlycurrent
hwWlanCrcErrActual
OBJECT-TYPE
CRC error alarm threshold value.The unit is 1/10000.
1.3.6.1.4.1.2011.6.139.13.1.2.21Unsigned32read-onlycurrent
hwWlanCrcThreshold
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.13.1.2.22Unsigned32read-onlycurrent
hwWlanApNotifyWlanId
OBJECT-TYPE
WLAN ID used to report alarms.
1.3.6.1.4.1.2011.6.139.13.1.2.23Integer32read-onlycurrent
hwWlanApLicenseInfo
OBJECT-TYPE
License information of APs.
1.3.6.1.4.1.2011.6.139.13.1.2.24OCTET STRINGread-onlycurrent
hwWlanCrcPortType
OBJECT-TYPE
CRC port type.
1.3.6.1.4.1.2011.6.139.13.1.2.25OCTET STRINGread-onlycurrent
hwWlanCrcPortID
OBJECT-TYPE
CRC port number.
1.3.6.1.4.1.2011.6.139.13.1.2.26Integer32read-onlycurrent
hwWlanApArpAttackDropNum
OBJECT-TYPE
The number of packets discarded due to ARP attacks.
1.3.6.1.4.1.2011.6.139.13.1.2.27Integer32read-onlycurrent
hwWlanApFaultID
OBJECT-TYPE
This object indicates an FMEA fault alarm.
1.3.6.1.4.1.2011.6.139.13.1.2.28Integer32read-onlycurrent
hwWlanApIfIndex
OBJECT-TYPE
AP interface index.
1.3.6.1.4.1.2011.6.139.13.1.2.29Integer32read-onlycurrent
hwWlanApFaultInfo
OBJECT-TYPE
AP fault description.
1.3.6.1.4.1.2011.6.139.13.1.2.30OCTET STRINGread-onlycurrent
hwWlanApSoftWareVersion
OBJECT-TYPE
AP software version.
1.3.6.1.4.1.2011.6.139.13.1.2.31OCTET STRINGread-onlycurrent
hwRadioUploadRemoteCaptureResult
OBJECT-TYPE
Remote capture result.
1.3.6.1.4.1.2011.6.139.13.1.2.32OCTET STRINGread-onlycurrent
hwWlanApRadioID
OBJECT-TYPE
Radio ID.
1.3.6.1.4.1.2011.6.139.13.1.2.33Integer32read-onlycurrent
hwWlanApCpuOverloadDescInfo
OBJECT-TYPE
The high AP CPU usage.
1.3.6.1.4.1.2011.6.139.13.1.2.34OCTET STRINGread-onlycurrent
hwWlanApOpticalTxPower
OBJECT-TYPE
Transmit power of the AP's optical module.
1.3.6.1.4.1.2011.6.139.13.1.2.35Integer32read-onlycurrent
hwWlanSlotNum
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.13.1.2.36OCTET STRINGread-onlycurrent
hwApPoePdPriority
OBJECT-TYPE
This object identifies the PD priority.The default value is low.
1.3.6.1.4.1.2011.6.139.13.1.2.37INTEGER {critical(1), high(2), low(3)}accessible-for-notifycurrent
hwApPoePortPriority
OBJECT-TYPE
This object identifies the priority of an interface.The default value is low.
1.3.6.1.4.1.2011.6.139.13.1.2.38INTEGER {critical(1), high(2), low(3)}accessible-for-notifycurrent
hwApPoeCurConsumPower
OBJECT-TYPE
This object identifies the current consuming power.
1.3.6.1.4.1.2011.6.139.13.1.2.39Integer32accessible-for-notifycurrent
hwApPoeConsumPowerThreshold
OBJECT-TYPE
This object identifies the threshold of consuming power.
1.3.6.1.4.1.2011.6.139.13.1.2.40Integer32accessible-for-notifycurrent
hwApFanIndex
OBJECT-TYPE
This object identifies the id of fan.
1.3.6.1.4.1.2011.6.139.13.1.2.41Integer32accessible-for-notifycurrent
hwApEntityPhysicalName
OBJECT-TYPE
This object identifies the phisical name of entity name.
1.3.6.1.4.1.2011.6.139.13.1.2.42OCTET STRINGaccessible-for-notifycurrent
hwApStorageIndex
OBJECT-TYPE
This object identifies the id of Storage.
1.3.6.1.4.1.2011.6.139.13.1.2.43Integer32accessible-for-notifycurrent
hwApStorageName
OBJECT-TYPE
This object identifies the name of Storage.
1.3.6.1.4.1.2011.6.139.13.1.2.44OCTET STRINGaccessible-for-notifycurrent
hwWlanApOpticalFaultID
OBJECT-TYPE
This object identifies the error corde of the optical transceiver fault.
1.3.6.1.4.1.2011.6.139.13.1.2.45Integer32accessible-for-notifycurrent
hwWlanApWlanID
OBJECT-TYPE
This object identifies the Wlan Id of the Vap that has the max number of stations.
1.3.6.1.4.1.2011.6.139.13.1.2.46MacAddressread-onlycurrent
hwWlanBLEMacAddr
OBJECT-TYPE
MAC address of a BLE device.
1.3.6.1.4.1.2011.6.139.13.1.2.47MacAddressread-onlycurrent
hwWlanApUdp
OBJECT-TYPE
UDP port number.
1.3.6.1.4.1.2011.6.139.13.1.2.48Integer32accessible-for-notifycurrent
hwSubFirmwareName
OBJECT-TYPE
AP's sub-firmware name.
1.3.6.1.4.1.2011.6.139.13.1.2.49OCTET STRINGaccessible-for-notifycurrent
hwSubFirmware
OBJECT-TYPE
AP's sub-firmware number.
1.3.6.1.4.1.2011.6.139.13.1.2.50Integer32accessible-for-notifycurrent
hwRealVersion
OBJECT-TYPE
Actual version of the AP's sub-firmware.
1.3.6.1.4.1.2011.6.139.13.1.2.51OCTET STRINGaccessible-for-notifycurrent
hwExpectVersion
OBJECT-TYPE
Expected version of the AP's sub-firmware.
1.3.6.1.4.1.2011.6.139.13.1.2.52OCTET STRINGaccessible-for-notifycurrent
hwWlanApIotCardId
OBJECT-TYPE
Number of the slot on an AP where an IoT card is installed.
1.3.6.1.4.1.2011.6.139.13.1.2.53Integer32accessible-for-notifycurrent
hwPowerOffReason
OBJECT-TYPE
This object identifies the reason of power off.
1.3.6.1.4.1.2011.6.139.13.1.2.54OCTET STRINGaccessible-for-notifycurrent
hwApSpecificChangeConfig
OBJECT-TYPE
This object identifies the config of change.
1.3.6.1.4.1.2011.6.139.13.1.2.55OCTET STRINGaccessible-for-notifycurrent
hwApSpecificChangeReason
OBJECT-TYPE
This object identifies the reason of change config.
1.3.6.1.4.1.2011.6.139.13.1.2.56OCTET STRINGaccessible-for-notifycurrent
hwApInconsisitConfig
OBJECT-TYPE
This object identifies the inconsistent config.
1.3.6.1.4.1.2011.6.139.13.1.2.57OCTET STRINGaccessible-for-notifycurrent
hwApConfigInconsisitReason
OBJECT-TYPE
This object identifies the reason of inconsistent config.
1.3.6.1.4.1.2011.6.139.13.1.2.58OCTET STRINGaccessible-for-notifycurrent
hwApPowerWorkMode
OBJECT-TYPE
This object identifies the current power work mode of AP.
1.3.6.1.4.1.2011.6.139.13.1.2.59OCTET STRING (SIZE(0..10))accessible-for-notifycurrent
hwApExpectPowerWorkMode
OBJECT-TYPE
This object identifies the expect power work mode of AP.
1.3.6.1.4.1.2011.6.139.13.1.2.60OCTET STRING (SIZE(0..10))accessible-for-notifycurrent
hwWlanIllegalMac
OBJECT-TYPE
This object identifies the illegal mac.
1.3.6.1.4.1.2011.6.139.13.1.2.61MacAddressaccessible-for-notifycurrent
hwApVlanId
OBJECT-TYPE
This object identifies the vlan id.
1.3.6.1.4.1.2011.6.139.13.1.2.62Integer32accessible-for-notifycurrent
hwWlanApIfName
OBJECT-TYPE
This object identifies the IfName.
1.3.6.1.4.1.2011.6.139.13.1.2.63OCTET STRINGaccessible-for-notifycurrent
hwWlanApConfigType
OBJECT-TYPE
This object identifies the type of ap config.
1.3.6.1.4.1.2011.6.139.13.1.2.64OCTET STRINGaccessible-for-notifycurrent
hwAPDiskThresholdWarning
OBJECT-TYPE
The Disk usage threshold of an AP.
1.3.6.1.4.1.2011.6.139.13.1.2.65Integer32read-onlycurrent
hwAPDiskThresholdCurrent
OBJECT-TYPE
The current Disk usage of an AP.
1.3.6.1.4.1.2011.6.139.13.1.2.66Integer32read-onlycurrent
hwAPConflictIPAddress
OBJECT-TYPE
The IP address of the ap conflicts with that of the gateway or another AP.
1.3.6.1.4.1.2011.6.139.13.1.2.67OCTET STRINGread-onlycurrent
hwAPMaxNum
OBJECT-TYPE
The maximum specifications of APs.
1.3.6.1.4.1.2011.6.139.13.1.2.68Integer32read-onlycurrent
hwWlanApIotCardType
OBJECT-TYPE
This object indicates the IOT card type.
1.3.6.1.4.1.2011.6.139.13.1.2.69OCTET STRING (SIZE(0..16))accessible-for-notifycurrent
hwApPowerId
OBJECT-TYPE
This object indicates the power ID of the AP.
1.3.6.1.4.1.2011.6.139.13.1.2.70Integer32read-onlycurrent
hwApPowerFaultId
OBJECT-TYPE
This object indicates the AP power fault ID.
1.3.6.1.4.1.2011.6.139.13.1.2.71Integer32read-onlycurrent
hwApPowerFaultReason
OBJECT-TYPE
This object indicates the AP power fault reason.
1.3.6.1.4.1.2011.6.139.13.1.2.72OCTET STRING (SIZE(0..256))accessible-for-notifycurrent
hwWlanApTemperatureType
OBJECT-TYPE
This object indicates the AP temperature type.
1.3.6.1.4.1.2011.6.139.13.1.2.73OCTET STRING (SIZE(0..16))accessible-for-notifycurrent
hwWlanApOpticalVoltage
OBJECT-TYPE
Voltage of an AP's optical module.
1.3.6.1.4.1.2011.6.139.13.1.2.74Integer32read-onlycurrent
hwWlanApOpticalCurrent
OBJECT-TYPE
Current of an AP's optical module.
1.3.6.1.4.1.2011.6.139.13.1.2.75Integer32read-onlycurrent
hwWlanApPowerInsufficientImpact
OBJECT-TYPE
This object indicates the impact of AP power insufficient.
1.3.6.1.4.1.2011.6.139.13.1.2.76OCTET STRING (SIZE(0..64))accessible-for-notifycurrent
hwWlanApTypeObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.13.2
hwWlanApTypeTable
OBJECT-TYPE
This table is used to query attributes based on AP types and restart APs based on AP types.
1.3.6.1.4.1.2011.6.139.13.2.1not-accessiblecurrent
hwWlanApTypeEntry
OBJECT-TYPE
The index of this table is hwWlanApType.
1.3.6.1.4.1.2011.6.139.13.2.1.1not-accessiblecurrent
hwWlanApType
OBJECT-TYPE
This object indicates the AP type name. It is the index of the table.
1.3.6.1.4.1.2011.6.139.13.2.1.1.1OCTET STRINGread-createcurrent
hwWlanApTypeDesc
OBJECT-TYPE
This object indicates description of an AP type.
1.3.6.1.4.1.2011.6.139.13.2.1.1.2OCTET STRINGread-onlycurrent
hwWlanApTypeWiredPortNum
OBJECT-TYPE
This object indicates the number of wired ports on APs of a certain type.
1.3.6.1.4.1.2011.6.139.13.2.1.1.3Integer32read-onlycurrent
hwWlanApTypeRadioNum
OBJECT-TYPE
This object indicates the number of radios on APs of a certain type.
1.3.6.1.4.1.2011.6.139.13.2.1.1.4Integer32read-onlycurrent
hwWlanApTypeMaxStaNum
OBJECT-TYPE
This object indicates the maximum number of access STAs on an AP of a certain type.
1.3.6.1.4.1.2011.6.139.13.2.1.1.5Integer32read-onlycurrent
hwWlanApTypeReset
OBJECT-TYPE
This object indicates that APs are restarted based on the AP type.
1.3.6.1.4.1.2011.6.139.13.2.1.1.6Integer32read-writecurrent
hwWlanApTypeExternalAntenna
OBJECT-TYPE
This object indicates the attribute of support external antenna on an AP of a certain type.
1.3.6.1.4.1.2011.6.139.13.2.1.1.7INTEGER {notSupport(1), support(2)}read-onlycurrent
hwWlanApTypeID
OBJECT-TYPE
AP type ID.
1.3.6.1.4.1.2011.6.139.13.2.1.1.8Integer32 (0..255)read-writecurrent
hwWlanApTypeOperate
OBJECT-TYPE
This object indicates the row status.
1.3.6.1.4.1.2011.6.139.13.2.1.1.9INTEGER {add(1), delete(2)}read-writecurrent
hwWlanApTypeConfigurationMethod
OBJECT-TYPE
AP type configuration method.
1.3.6.1.4.1.2011.6.139.13.2.1.1.10OCTET STRING (SIZE(1..31))read-onlycurrent
hwWlanApTypeAutoCreateMethod
OBJECT-TYPE
Automatic AP type generation method.
1.3.6.1.4.1.2011.6.139.13.2.1.1.11INTEGER {createbyid(1), createbytype(2), createall(3)}read-writecurrent
hwWlanApTypeRadioTable
OBJECT-TYPE
This table is used to query radio-related attributes of APs of a certain type.
1.3.6.1.4.1.2011.6.139.13.2.2not-accessiblecurrent
hwWlanApTypeRadioEntry
OBJECT-TYPE
The indexes of this table are hwWlanApType and hwWlanApTypeRadioIndex.
1.3.6.1.4.1.2011.6.139.13.2.2.1not-accessiblecurrent
hwWlanApTypeRadioIndex
OBJECT-TYPE
This object indicates the radio index of APs of a certain type.
1.3.6.1.4.1.2011.6.139.13.2.2.1.1Integer32not-accessiblecurrent
hwWlanApTypeRadioType
OBJECT-TYPE
This object indicates the radio type of APs of a certain type.
1.3.6.1.4.1.2011.6.139.13.2.2.1.2INTEGER {wlan80211a(1), wlan80211b(2), wlan80211g(3), wlan80211bg(4), wlan80211an(5), wlan80211bgn(6), wlan80211abgn(7), wlan80211ac(8), wlan80211anac(9), wlan80211bgnax(10), wlan80211anacax(11), wlan80211ax(12)}read-onlycurrent
hwWlanRadioMaxSpatialStreamsNum
OBJECT-TYPE
This object indicates the maximum number of spatial streams of an AP radio.
1.3.6.1.4.1.2011.6.139.13.2.2.1.3Unsigned32read-onlycurrent
hwWlanApTypeRadioAntennaGain
OBJECT-TYPE
This object indicates that the antenna gain is configured according to the radio ID.
1.3.6.1.4.1.2011.6.139.13.2.2.1.4Integer32read-onlycurrent
hwWlanApTypeRadioMaxVAPNum
OBJECT-TYPE
This object indicates the maximum number of VAPs that a radio supports.
1.3.6.1.4.1.2011.6.139.13.2.2.1.5Unsigned32read-onlycurrent
hwWlanApTypeWiredPortTable
OBJECT-TYPE
This table is used to query wired interface attributes of APs of a certain type.
1.3.6.1.4.1.2011.6.139.13.2.3not-accessiblecurrent
hwWlanApTypeWiredPortEntry
OBJECT-TYPE
The indexes of this table are hwWlanApType and hwWlanApTypeWiredPortIndex.
1.3.6.1.4.1.2011.6.139.13.2.3.1not-accessiblecurrent
hwWlanApTypeWiredPortIndex
OBJECT-TYPE
This object indicates the index of an AP's wired interface. Numbering rule: port-index = port-type * 100 + port-number. For example, the indexes of a wall plate AP's GE0, eth0, and eth1 are 200 (2 * 100 + 0 = 200), 100 (1 * 100 + 0 = 100), and 101 (1 * 100 + 1 = 101) respectively.
1.3.6.1.4.1.2011.6.139.13.2.3.1.1Integer32not-accessiblecurrent
hwWlanApTypeWiredPortType
OBJECT-TYPE
This object indicates the type of an AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.2.3.1.2INTEGER {fe(1), ge(2), gpon(3), epon(4), adsl2plus(5), ethTrunk(6), multige(7), xge(8)}read-onlycurrent
hwWlanApTypeWiredPortName
OBJECT-TYPE
This object indicates the name of a wired interface on APs of a certain type, for example, ethernet 0, ethernet 1, gigabit-ethernet 0, and eth-trunk 0.
1.3.6.1.4.1.2011.6.139.13.2.3.1.3OCTET STRINGread-onlycurrent
hwWlanApTypeUndefinedTable
OBJECT-TYPE
This table is used to operate the undefined AP type record reported by an AP.
1.3.6.1.4.1.2011.6.139.13.2.4not-accessiblecurrent
hwWlanApTypeUndefinedEntry
OBJECT-TYPE
The indexes of this table is hwWlanApTypeUndefined.
1.3.6.1.4.1.2011.6.139.13.2.4.1not-accessiblecurrent
hwWlanApTypeUndefined
OBJECT-TYPE
Name of an undefined AP type.
1.3.6.1.4.1.2011.6.139.13.2.4.1.1OCTET STRING (SIZE(1..31))read-onlycurrent
hwWlanApTypeIDUndefined
OBJECT-TYPE
ID of an undefined AP type.
1.3.6.1.4.1.2011.6.139.13.2.4.1.2Integer32 (0..255)read-onlycurrent
hwWlanApTypeUndefinedReportApMac
OBJECT-TYPE
MAC address of the AP that reports an undefined AP type.
1.3.6.1.4.1.2011.6.139.13.2.4.1.3MacAddressread-onlycurrent
hwWlanApTypeUndefinedReportTime
OBJECT-TYPE
Time when an undefined AP type is reported.
1.3.6.1.4.1.2011.6.139.13.2.4.1.4OCTET STRINGread-onlycurrent
hwWlanApTypeUndefinedOperate
OBJECT-TYPE
This object indicates the row status..
1.3.6.1.4.1.2011.6.139.13.2.4.1.5INTEGER {delete(1)}read-writecurrent
hwWlanApTypeAttributesAbnormalCheckTable
OBJECT-TYPE
This table is used to query exceptions in verifying type attributes reported by an AP.
1.3.6.1.4.1.2011.6.139.13.2.5not-accessiblecurrent
hwWlanApTypeAttributesAbnormalCheckEntry
OBJECT-TYPE
The indexes of this table is hwWlanApTypeAttributesAbnormalCheck.
1.3.6.1.4.1.2011.6.139.13.2.5.1not-accessiblecurrent
hwWlanApTypeAttributesAbnormalCheck
OBJECT-TYPE
This object indicates the name of an AP type whose attributes fail to be verified.
1.3.6.1.4.1.2011.6.139.13.2.5.1.1OCTET STRING (SIZE(1..31))read-onlycurrent
hwWlanApTypeIDAttributesAbnormalCheck
OBJECT-TYPE
This object indicates the ID of an AP type whose attributes fail to be verified.
1.3.6.1.4.1.2011.6.139.13.2.5.1.2Integer32 (0..255)read-onlycurrent
hwWlanApTypeAttributesAbnormalCheckResult
OBJECT-TYPE
Abnormal check result of reporting AP type attributes.
1.3.6.1.4.1.2011.6.139.13.2.5.1.3INTEGER {risk(1), fail(2)}read-onlycurrent
hwWlanApTypeAttributesAbnormalCheckReason
OBJECT-TYPE
Reason for the abnormal check result of reporting AP type attributes.
1.3.6.1.4.1.2011.6.139.13.2.5.1.4INTEGER {rangeconflict(1), lostattributes(2)}read-onlycurrent
hwWlanApObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.13.3
hwWlanApPing
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.13.3.1
hwWlanApPingApMac
OBJECT-TYPE
This object specifies the MAC address in an AP ping operation. If the AP ID and MAC address are specified concurrently, the AP is pinged based on the MAC address.
1.3.6.1.4.1.2011.6.139.13.3.1.1MacAddressread-writecurrent
hwWlanApPingAddress
OBJECT-TYPE
This object indicates the domain name or IP address of the destination host.
1.3.6.1.4.1.2011.6.139.13.3.1.2OCTET STRINGread-writecurrent
hwWlanApPingCount
OBJECT-TYPE
This object indicates the number of times ICMP ECHO-REQUEST packets are sent.Default value: 4.
1.3.6.1.4.1.2011.6.139.13.3.1.3Integer32read-writecurrent
hwWlanApPingPacketSize
OBJECT-TYPE
This object indicates the length of an ECHO-REQUE.
1.3.6.1.4.1.2011.6.139.13.3.1.4Integer32read-writecurrent
hwWlanApPingWaitTime
OBJECT-TYPE
This object indicates the time to wait before sending the next ICMP Request packet.Unit: ms Default value: 2000.
1.3.6.1.4.1.2011.6.139.13.3.1.5Integer32read-writecurrent
hwWlanApPingTimeOut
OBJECT-TYPE
This object indicates the timeout period for an ECHO-RESPONSE after an ECHO-REQUEST is sent.Unit: ms Default value: 2000.
1.3.6.1.4.1.2011.6.139.13.3.1.6Integer32read-writecurrent
hwWlanApPingResultSuccessCount
OBJECT-TYPE
This object indicates the number of successful AP ping operations. Only the result of the latest AP ping operation is kept.
1.3.6.1.4.1.2011.6.139.13.3.1.7Integer32read-onlycurrent
hwWlanApPingResultFailureCount
OBJECT-TYPE
This object indicates the number of AP ping operation failures. Only the result of the latest AP ping operation is kept.
1.3.6.1.4.1.2011.6.139.13.3.1.8Integer32read-onlycurrent
hwWlanApPingResultAveResponseTime
OBJECT-TYPE
This object indicates the average response time for an AP ping operation. Only the result of the latest AP ping operation is kept.Unit: ms.
1.3.6.1.4.1.2011.6.139.13.3.1.9Integer32read-onlycurrent
hwWlanApPingResultMinResponseTime
OBJECT-TYPE
This object indicates the minimum response time for an AP ping operation. Only the result of the latest AP ping operation is kept.Unit: ms.
1.3.6.1.4.1.2011.6.139.13.3.1.10Integer32read-onlycurrent
hwWlanApPingResultMaxResponseTime
OBJECT-TYPE
This object indicates the maximum response time for an AP ping operation. Only the result of the latest AP ping operation is kept.Unit: ms.
1.3.6.1.4.1.2011.6.139.13.3.1.11Integer32read-onlycurrent
hwWlanApPingResultFlag
OBJECT-TYPE
This object indicates the result of the AP ping operation.
1.3.6.1.4.1.2011.6.139.13.3.1.12INTEGER {false(1), true(2)}read-onlycurrent
hwWlanUnauthedApRecordTable
OBJECT-TYPE
This table describes rogue AP records. Rogue APs are those whose MAC addresses and SNs are not in the whitelist and not confirmed after being discovered by the AC.
1.3.6.1.4.1.2011.6.139.13.3.2not-accessiblecurrent
hwWlanUnauthedApRecordEntry
OBJECT-TYPE
The index of this table is hwWlanUnauthedApRecordIndex.
1.3.6.1.4.1.2011.6.139.13.3.2.1not-accessiblecurrent
hwWlanUnauthedApRecordIndex
OBJECT-TYPE
This object indicates the index of a rogue AP record.
1.3.6.1.4.1.2011.6.139.13.3.2.1.1Integer32not-accessiblecurrent
hwWlanUnauthedApType
OBJECT-TYPE
This object indicates the type of a rogue AP.
1.3.6.1.4.1.2011.6.139.13.3.2.1.2OCTET STRINGread-onlycurrent
hwWlanUnauthedApMacAddress
OBJECT-TYPE
This object indicates the type of a rogue AP.
1.3.6.1.4.1.2011.6.139.13.3.2.1.3MacAddressread-onlycurrent
hwWlanUnauthedApSn
OBJECT-TYPE
This object indicates the SN of a rogue AP.
1.3.6.1.4.1.2011.6.139.13.3.2.1.4OCTET STRINGread-onlycurrent
hwWlanUnauthedApIpAddress
OBJECT-TYPE
This object indicates the IP address of a rogue AP.
1.3.6.1.4.1.2011.6.139.13.3.2.1.5IpAddressread-onlycurrent
hwWlanUnauthedApRecordTime
OBJECT-TYPE
This object indicates the time when a rogue AP is recorded.
1.3.6.1.4.1.2011.6.139.13.3.2.1.6DateAndTimeread-onlycurrent
hwWlanUnauthedAPIPv6Address
OBJECT-TYPE
This object indicates the IPv6 address of a rogue AP.
1.3.6.1.4.1.2011.6.139.13.3.2.1.7OCTET STRINGread-onlycurrent
hwWlanApTable
OBJECT-TYPE
This table is used to add, delete, modify, reset, or confirm APs. You can also use the table to query the configuration and restore factory settings of APs.
1.3.6.1.4.1.2011.6.139.13.3.3not-accessiblecurrent
hwWlanApEntry
OBJECT-TYPE
The index of this table is hwWlanApMac.
1.3.6.1.4.1.2011.6.139.13.3.3.1not-accessiblecurrent
hwWlanApMac
OBJECT-TYPE
This object indicates the MAC address of an AP.
1.3.6.1.4.1.2011.6.139.13.3.3.1.1MacAddressaccessible-for-notifycurrent
hwWlanApSn
OBJECT-TYPE
This object indicates the sequence number (SN) of an AP.
1.3.6.1.4.1.2011.6.139.13.3.3.1.2OCTET STRINGread-writecurrent
hwWlanApTypeInfo
OBJECT-TYPE
This object indicates the AP type.
1.3.6.1.4.1.2011.6.139.13.3.3.1.3OCTET STRINGread-onlycurrent
hwWlanApName
OBJECT-TYPE
This object indicates the AP name.
1.3.6.1.4.1.2011.6.139.13.3.3.1.4OCTET STRINGread-writecurrent
hwWlanApGroup
OBJECT-TYPE
This object indicates the group to which an AP belongs.
1.3.6.1.4.1.2011.6.139.13.3.3.1.5OCTET STRINGread-writecurrent
hwWlanApRunState
OBJECT-TYPE
This object indicates the AP state.
1.3.6.1.4.1.2011.6.139.13.3.3.1.6INTEGER {idle(1), autofind(2), typeNotMatch(3), fault(4), config(5), configFailed(6), download(7), normal(8), committing(9), commitFailed(10), standby(11), verMismatch(12), nameConflicted(13), invalid(14), countryCodeMismatch(15)}read-onlycurrent
hwWlanApSoftwareVersion
OBJECT-TYPE
This object indicates the AP software version.
1.3.6.1.4.1.2011.6.139.13.3.3.1.7OCTET STRINGread-onlycurrent
hwWlanApHardwareVersion
OBJECT-TYPE
This object indicates the AP hardware version.
1.3.6.1.4.1.2011.6.139.13.3.3.1.8OCTET STRINGread-onlycurrent
hwWlanApCpuType
OBJECT-TYPE
This object indicates the CPU type of an AP.
1.3.6.1.4.1.2011.6.139.13.3.3.1.9OCTET STRINGread-onlycurrent
hwWlanApCpufrequency
OBJECT-TYPE
This object indicates the CPU frequency of an AP.Unit: MHz.
1.3.6.1.4.1.2011.6.139.13.3.3.1.10Integer32read-onlycurrent
hwWlanApMemoryType
OBJECT-TYPE
This object indicates the memory type of an AP.
1.3.6.1.4.1.2011.6.139.13.3.3.1.11OCTET STRINGread-onlycurrent
hwWlanApDomain
OBJECT-TYPE
This object indicates the AP domain.
1.3.6.1.4.1.2011.6.139.13.3.3.1.12OCTET STRINGread-onlycurrent
hwWlanApIpAddress
OBJECT-TYPE
This object indicates the IP address of an AP.
1.3.6.1.4.1.2011.6.139.13.3.3.1.13IpAddressread-onlycurrent
hwWlanApIpNetMask
OBJECT-TYPE
This object indicates the IP address mask of an AP.
1.3.6.1.4.1.2011.6.139.13.3.3.1.14IpAddressread-onlycurrent
hwWlanApGatewayIp
OBJECT-TYPE
This object indicates the gateway IP address of an AP.
1.3.6.1.4.1.2011.6.139.13.3.3.1.15IpAddressread-onlycurrent
hwWlanApMemorySize
OBJECT-TYPE
This object indicates the memory size of an AP.Unit: MB.
1.3.6.1.4.1.2011.6.139.13.3.3.1.16Integer32read-onlycurrent
hwWlanApFlashSize
OBJECT-TYPE
This object indicates the flash memory size of an AP.Unit: MB.
1.3.6.1.4.1.2011.6.139.13.3.3.1.17Integer32read-onlycurrent
hwWlanApRunTime
OBJECT-TYPE
This object indicates the running time of an AP.Unit: tick.
1.3.6.1.4.1.2011.6.139.13.3.3.1.18Unsigned32read-onlycurrent
hwWlanApAdminOper
OBJECT-TYPE
This object indicates administrative status of an AP.
1.3.6.1.4.1.2011.6.139.13.3.3.1.19INTEGER {reset(1), manufacturerConfig(3)}read-createcurrent
hwWlanApDNS
OBJECT-TYPE
This object indicates the AP DNS.
1.3.6.1.4.1.2011.6.139.13.3.3.1.20IpAddressread-onlycurrent
hwWlanApOnlineTime
OBJECT-TYPE
This object indicates online duration of an AP.
1.3.6.1.4.1.2011.6.139.13.3.3.1.21Unsigned32read-onlycurrent
hwWlanApSysSoftwareDesc
OBJECT-TYPE
This object indicates system software description of an AP.
1.3.6.1.4.1.2011.6.139.13.3.3.1.22OCTET STRINGread-onlycurrent
hwWlanApSysHardtwareDesc
OBJECT-TYPE
This object indicates system hardware description of an AP.
1.3.6.1.4.1.2011.6.139.13.3.3.1.23OCTET STRINGread-onlycurrent
hwWlanApSysManufacture
OBJECT-TYPE
This object indicates the manufacturer of an AP.
1.3.6.1.4.1.2011.6.139.13.3.3.1.24OCTET STRINGread-onlycurrent
hwWlanApSysSoftwareName
OBJECT-TYPE
This object indicates software name of an AP.
1.3.6.1.4.1.2011.6.139.13.3.3.1.25OCTET STRINGread-onlycurrent
hwWlanApSysSoftwareVendor
OBJECT-TYPE
This object indicates the manufacturer of the AP software.
1.3.6.1.4.1.2011.6.139.13.3.3.1.26OCTET STRINGread-onlycurrent
hwWlanApBomCode
OBJECT-TYPE
This object indicates the BOM code.
1.3.6.1.4.1.2011.6.139.13.3.3.1.27OCTET STRINGread-onlycurrent
hwWlanApIpv6Address
OBJECT-TYPE
This object indicates the IPv6 address.
1.3.6.1.4.1.2011.6.139.13.3.3.1.28OCTET STRINGread-onlycurrent
hwWlanApIpv6NetMask
OBJECT-TYPE
This object indicates the IPv6 address mask.
1.3.6.1.4.1.2011.6.139.13.3.3.1.29OCTET STRINGread-onlycurrent
hwWlanApGatewayIpv6
OBJECT-TYPE
This object indicates the IPv6 gateway.
1.3.6.1.4.1.2011.6.139.13.3.3.1.30OCTET STRINGread-onlycurrent
hwWlanApIpv6DNS
OBJECT-TYPE
This object indicates the IPv6 DNS.
1.3.6.1.4.1.2011.6.139.13.3.3.1.31OCTET STRINGread-onlycurrent
hwWlanApProtectAcIPv6Addr
OBJECT-TYPE
This object indicates the IPv6 address of the standby AC.
1.3.6.1.4.1.2011.6.139.13.3.3.1.32OCTET STRINGread-onlycurrent
hwWlanApBootCountTotal
OBJECT-TYPE
This object indicates the total number of times an AP is restarted.
1.3.6.1.4.1.2011.6.139.13.3.3.1.33Integer32read-onlycurrent
hwWlanApBootCountPowerOff
OBJECT-TYPE
This object indicates the number of times an AP is restarted due to a power failure.
1.3.6.1.4.1.2011.6.139.13.3.3.1.34Integer32read-onlycurrent
hwWlanApBootCountClear
OBJECT-TYPE
This object clears the AP restart count.
1.3.6.1.4.1.2011.6.139.13.3.3.1.35RowStatusread-createcurrent
hwWlanApElectronicLabel
OBJECT-TYPE
This object indicates the electronic label of an AP.
1.3.6.1.4.1.2011.6.139.13.3.3.1.36OCTET STRING (SIZE(0..3073))read-onlycurrent
hwWlanApWiredPortNum
OBJECT-TYPE
This object indicates the total number of wired interfaces.
1.3.6.1.4.1.2011.6.139.13.3.3.1.37Integer32read-onlycurrent
hwWlanApWiredPortMtu
OBJECT-TYPE
This object indicates the maximum transmit unit (MTU) of a wired interface.
1.3.6.1.4.1.2011.6.139.13.3.3.1.38Integer32read-onlycurrent
hwWlanApWiredPortMac
OBJECT-TYPE
This object indicates the MAC address of a wired interface.
1.3.6.1.4.1.2011.6.139.13.3.3.1.39MacAddressread-onlycurrent
hwWlanApMemoryUseRate
OBJECT-TYPE
This object indicates the memory usage.Unit: %.
1.3.6.1.4.1.2011.6.139.13.3.3.1.40Integer32read-onlycurrent
hwWlanApCpuUseRate
OBJECT-TYPE
This object indicates the CPU usage.Unit: %.
1.3.6.1.4.1.2011.6.139.13.3.3.1.41Integer32read-onlycurrent
hwWlanApFlashFreeSize
OBJECT-TYPE
This object indicates available space in the flash memory.Unit: KB.
1.3.6.1.4.1.2011.6.139.13.3.3.1.42Integer32read-onlycurrent
hwWlanApTemperature
OBJECT-TYPE
This object indicates the operating temperature.
1.3.6.1.4.1.2011.6.139.13.3.3.1.43Integer32read-onlycurrent
hwWlanApOnlineUserNum
OBJECT-TYPE
This object indicates the number of online users.
1.3.6.1.4.1.2011.6.139.13.3.3.1.44Integer32read-onlycurrent
hwWlanApDualBandAssoc5gStaNum
OBJECT-TYPE
This object indicates the number of dual-band terminals that access the 5 GHz radio.
1.3.6.1.4.1.2011.6.139.13.3.3.1.45Unsigned32read-onlycurrent
hwWlanApDualBandStaNum
OBJECT-TYPE
This object indicates the number of STAs that support dual frequency bands.
1.3.6.1.4.1.2011.6.139.13.3.3.1.46Unsigned32read-onlycurrent
hwWlanApStaOnlineFailRatio
OBJECT-TYPE
This object indicates STA online failure ratio on an AP.
1.3.6.1.4.1.2011.6.139.13.3.3.1.47Unsigned32read-onlycurrent
hwWlanApStaOfflineRatio
OBJECT-TYPE
This object indicates STA offline ratio of an AP.
1.3.6.1.4.1.2011.6.139.13.3.3.1.48Unsigned32read-onlycurrent
hwWlanApStickyClientRatio
OBJECT-TYPE
This object indicates the proportion of sticky STAs to all STAs.
1.3.6.1.4.1.2011.6.139.13.3.3.1.49Unsigned32read-onlycurrent
hwWlanApUpEthPortSpeed
OBJECT-TYPE
This object indicates the rate of an upstream Ethernet interface.
1.3.6.1.4.1.2011.6.139.13.3.3.1.50INTEGER {speed10(1), speed100(2), speed1000(3), speed10000(4)}read-onlycurrent
hwWlanApUpEthPortSpeedMode
OBJECT-TYPE
This object indicates the rate mode of an upstream Ethernet interface.
1.3.6.1.4.1.2011.6.139.13.3.3.1.51INTEGER {auto(1), forced(2)}read-onlycurrent
hwWlanApUpEthPortDuplex
OBJECT-TYPE
This object indicates the duplex state of an upstream Ethernet interface.
1.3.6.1.4.1.2011.6.139.13.3.3.1.52INTEGER {half(1), full(2)}read-onlycurrent
hwWlanApUpEthPortDuplexMode
OBJECT-TYPE
This object indicates the duplex mode of an upstream Ethernet interface.
1.3.6.1.4.1.2011.6.139.13.3.3.1.53INTEGER {auto(1), forced(2)}read-onlycurrent
hwWlanApUpPortSpeed
OBJECT-TYPE
This object indicates the real-time rate of an upstream interface.Unit: Kbps.
1.3.6.1.4.1.2011.6.139.13.3.3.1.54Integer32read-onlycurrent
hwWlanAPUpPortPER
OBJECT-TYPE
This object indicates the packet error rate of an upstream interface.
1.3.6.1.4.1.2011.6.139.13.3.3.1.55Integer32read-onlycurrent
hwWlanEthportUpRate
OBJECT-TYPE
This object indicates the upstream rate of an Ethernet interface.
1.3.6.1.4.1.2011.6.139.13.3.3.1.56Integer32read-onlycurrent
hwWlanEthportDownRate
OBJECT-TYPE
This object indicates the downstream rate of an Ethernet interface.
1.3.6.1.4.1.2011.6.139.13.3.3.1.57Integer32read-onlycurrent
hwWlanApAirportUpTraffic
OBJECT-TYPE
This object indicates the traffic volume on an upstream wireless interface.Unit: bytes. The value is reported in 64 bits.
1.3.6.1.4.1.2011.6.139.13.3.3.1.58OCTET STRINGread-onlycurrent
hwWlanApAirportDwTraffic
OBJECT-TYPE
This object indicates the traffic volume on a downstream wireless interface.Unit: bytes. The value is reported in 64 bits.
1.3.6.1.4.1.2011.6.139.13.3.3.1.59OCTET STRINGread-onlycurrent
hwWlanApEthportDwTraffic
OBJECT-TYPE
This object indicates the traffic volume on a downstream wired interface.Unit: bytes. The value is reported in 64 bits.
1.3.6.1.4.1.2011.6.139.13.3.3.1.60OCTET STRINGread-onlycurrent
hwWlanApEthportUpTraffic
OBJECT-TYPE
This object indicates the traffic volume on an upstream wired interface.Unit: bytes. The value is reported in 64 bits.
1.3.6.1.4.1.2011.6.139.13.3.3.1.61OCTET STRINGread-onlycurrent
hwWlanApUpPortRecvPackets
OBJECT-TYPE
This object indicates the total number of frames received on an upstream interface, which is extended to 64 bits.
1.3.6.1.4.1.2011.6.139.13.3.3.1.62Counter64read-onlycurrent
hwWlanApUpPortSendPackets
OBJECT-TYPE
This object indicates the total number of frames sent on an upstream interface, which is extended to 64 bits.
1.3.6.1.4.1.2011.6.139.13.3.3.1.63Counter64read-onlycurrent
hwWlanApRowstatus
OBJECT-TYPE
This object indicates the row status.
1.3.6.1.4.1.2011.6.139.13.3.3.1.64RowStatusread-createcurrent
hwWlanApUpPortRecvBytes
OBJECT-TYPE
This object indicates the total number of bytes received on an upstream interface.
1.3.6.1.4.1.2011.6.139.13.3.3.1.65Counter64read-onlycurrent
hwWlanApUpPortSendBytes
OBJECT-TYPE
This object indicates the total number of bytes sent on an upstream interface.
1.3.6.1.4.1.2011.6.139.13.3.3.1.66Counter64read-onlycurrent
hwWlanApId
OBJECT-TYPE
Ap ID.
1.3.6.1.4.1.2011.6.139.13.3.3.1.67Unsigned32read-onlycurrent
hwWlanCentralApId
OBJECT-TYPE
This object indicates the central AP ID.
1.3.6.1.4.1.2011.6.139.13.3.3.1.68Unsigned32read-onlycurrent
hwWlanCentralApMac
OBJECT-TYPE
This object indicates the MAC address of an central AP.
1.3.6.1.4.1.2011.6.139.13.3.3.1.69MacAddressread-onlycurrent
hwWlanCentralApName
OBJECT-TYPE
This object indicates the central AP name.
1.3.6.1.4.1.2011.6.139.13.3.3.1.70OCTET STRINGread-onlycurrent
hwWlanApSDCardSize
OBJECT-TYPE
This object indicates the SD card size of an AP.Unit: MB.
1.3.6.1.4.1.2011.6.139.13.3.3.1.71Integer32read-onlycurrent
hwWlanAPLongitude
OBJECT-TYPE
This object indicates the longitude of an AP.
1.3.6.1.4.1.2011.6.139.13.3.3.1.72OCTET STRINGread-onlycurrent
hwWlanAPLatitude
OBJECT-TYPE
This object indicates the latitude of an AP.
1.3.6.1.4.1.2011.6.139.13.3.3.1.73OCTET STRINGread-onlycurrent
hwWlanApTotalOnlineTime
OBJECT-TYPE
This object indicates total online duration of an AP.
1.3.6.1.4.1.2011.6.139.13.3.3.1.74Unsigned32read-onlycurrent
hwWlanApDiscoverTime
OBJECT-TYPE
This object indicates discover duration of an AP.
1.3.6.1.4.1.2011.6.139.13.3.3.1.75Unsigned32read-onlycurrent
hwWlanAPPoeWorkmode
OBJECT-TYPE
This object indicates the work mode of POE.
1.3.6.1.4.1.2011.6.139.13.3.3.1.76INTEGER {af(1), at(2), bt(3), invalid(4), bt60(5), bt90(6)}read-onlycurrent
hwWlanAPPoeExpectedWorkmode
OBJECT-TYPE
This object indicates the expected work mode of POE.
1.3.6.1.4.1.2011.6.139.13.3.3.1.77INTEGER {af(1), at(2), bt(3), invalid(4), bt60(5), bt90(6)}read-onlycurrent
hwWlanAPStaOnlineFailStatistics
OBJECT-TYPE
This object indicates the Statistics of station online fail.
1.3.6.1.4.1.2011.6.139.13.3.3.1.78OCTET STRING (SIZE(0..1500))read-onlycurrent
hwWlanAPStaOfflineStatistics
OBJECT-TYPE
This object indicates the Statistics of station offline fail.
1.3.6.1.4.1.2011.6.139.13.3.3.1.79OCTET STRING (SIZE(0..1500))read-onlycurrent
hwWlanAPPowerSupplyState
OBJECT-TYPE
This object indicates the AP power supply state. In Limited state, some functions are limited. In Disabled state, all radios are off, and some WLAN functions are unavailable.
1.3.6.1.4.1.2011.6.139.13.3.3.1.80INTEGER {full(1), disabled(2), limited(3), invalid(4)}read-onlycurrent
hwWlanApDataLinkState
OBJECT-TYPE
This object indicates the state of an AP data link.
1.3.6.1.4.1.2011.6.139.13.3.3.1.81INTEGER {down(1), run(2), noneed(3)}read-onlycurrent
hwWlanApEnvironmentTemperature
OBJECT-TYPE
This object indicates the ambient temperature.
1.3.6.1.4.1.2011.6.139.13.3.3.1.82Integer32read-onlycurrent
hwWlanApCpuTemperature
OBJECT-TYPE
This object indicates the CPU temperature.
1.3.6.1.4.1.2011.6.139.13.3.3.1.83Integer32read-onlycurrent
hwWlanApNpTemperature
OBJECT-TYPE
This object indicates the NP chip temperature.
1.3.6.1.4.1.2011.6.139.13.3.3.1.84Integer32read-onlycurrent
hwWlanApWiredPortTable
OBJECT-TYPE
This table describes AP wired interfaces and is used to query attributes of the wired interfaces.
1.3.6.1.4.1.2011.6.139.13.3.4not-accessiblecurrent
hwWlanApWiredPortEntry
OBJECT-TYPE
The index of this table is hwWlanApMac and hwWlanApWiredPortIndex.
1.3.6.1.4.1.2011.6.139.13.3.4.1not-accessiblecurrent
hwWlanApWiredPortIndex
OBJECT-TYPE
This object indicates the index of an AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.4.1.1Integer32not-accessiblecurrent
hwWlanApWiredPortType
OBJECT-TYPE
This object indicates the type of an AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.4.1.2INTEGER {fe(1), ge(2), gpon(3), epon(4), adsl2plus(5), trunk(6), multige(7), xge(8)}read-onlycurrent
hwWlanApWiredPortDesc
OBJECT-TYPE
This object indicates description of an AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.4.1.3OCTET STRINGread-onlycurrent
hwWlanApWiredPortState
OBJECT-TYPE
This object indicates status of an AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.4.1.4INTEGER {unknown(-1), down(1), up(2), adminshutdown(3), stpshutdown(4), block(5)}read-onlycurrent
hwWlanApWiredPortSpeed
OBJECT-TYPE
This object indicates the rate of an AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.4.1.5Integer32read-onlycurrent
hwWlanApMultiWiredPortDuplex
OBJECT-TYPE
This object indicates the duplex state of an AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.4.1.6INTEGER {unknown(-1), half(1), full(2)}read-onlycurrent
hwWlanApMultiWiredPortNegotiation
OBJECT-TYPE
This object indicates the auto-negotiation mode of an AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.4.1.7INTEGER {unknown(-1), auto(1), forced(2)}read-onlycurrent
hwWlanApMultiWiredPortMode
OBJECT-TYPE
This object indicates the working mode of an AP's wired interface.Default value: null.
1.3.6.1.4.1.2011.6.139.13.3.4.1.8INTEGER {root(1), endpoint(2), middle(3), null(256)}read-onlycurrent
hwWlanApWiredPortApId
OBJECT-TYPE
This object indicates the AP ID.
1.3.6.1.4.1.2011.6.139.13.3.4.1.9Unsigned32read-onlycurrent
hwWlanApWiredPortApName
OBJECT-TYPE
This object indicates the AP name.
1.3.6.1.4.1.2011.6.139.13.3.4.1.10OCTET STRINGread-onlycurrent
hwWlanApWiredPortTrunkID
OBJECT-TYPE
This object indicates the port trunk ID.
1.3.6.1.4.1.2011.6.139.13.3.4.1.11Unsigned32read-onlycurrent
hwWlanApWiredPortTrunkActiveFlag
OBJECT-TYPE
This object indicates the port trunk active flag.
1.3.6.1.4.1.2011.6.139.13.3.4.1.12INTEGER {disable(1), enable(2), invalid(3)}read-onlycurrent
hwWlanApWiredPortDot1xAuthState
OBJECT-TYPE
This object indicates the dot1x auth state.
1.3.6.1.4.1.2011.6.139.13.3.4.1.13INTEGER {init(1), authenticating(2), success(3), fail(4), invalid(255)}read-onlycurrent
hwWlanApWiredPortStatTable
OBJECT-TYPE
This table is used to query or clear statistics on AP wired interfaces.
1.3.6.1.4.1.2011.6.139.13.3.5not-accessiblecurrent
hwWlanApWiredPortStatEntry
OBJECT-TYPE
The indexes of this table are hwWlanApMac and hwWlanApWiredPortIndex.
1.3.6.1.4.1.2011.6.139.13.3.5.1not-accessiblecurrent
hwWlanApWiredPortStatClear
OBJECT-TYPE
This object clears interface statistics.
1.3.6.1.4.1.2011.6.139.13.3.5.1.1Integer32read-writecurrent
hwWlanApWiredPortUpDwnTimes
OBJECT-TYPE
This object indicates the number of times an AP's wired interface alternates between Up and Down.
1.3.6.1.4.1.2011.6.139.13.3.5.1.2Unsigned32read-onlycurrent
hwWlanApWiredPortInPkts
OBJECT-TYPE
This object indicates the total number of frames received on an AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.5.1.3Counter64read-onlycurrent
hwWlanApWiredPortInUnicastPkts
OBJECT-TYPE
This object indicates the number of unicast frames received on an AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.5.1.4Counter64read-onlycurrent
hwWlanApWiredPortInNonUnicastPkts
OBJECT-TYPE
This object indicates the number of non-unicast frames received on an AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.5.1.5Counter64read-onlycurrent
hwWlanApWiredPortInBytes
OBJECT-TYPE
This object indicates the number of bytes received on an AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.5.1.6Counter64read-onlycurrent
hwWlanApWiredPortInErrorPkts
OBJECT-TYPE
This object indicates the number of error frames received on an AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.5.1.7Counter64read-onlycurrent
hwWlanApWiredPortInDiscardPkts
OBJECT-TYPE
This object indicates the number of dropped frames received on an AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.5.1.8Counter64read-onlycurrent
hwWlanApWiredPortOutPkts
OBJECT-TYPE
This object indicates the total number of frames sent on an AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.5.1.9Counter64read-onlycurrent
hwWlanApWiredPortOutUnicastPkts
OBJECT-TYPE
This object indicates the number of unicast frames sent on an AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.5.1.10Counter64read-onlycurrent
hwWlanApWiredPortOutNonUnicastPkts
OBJECT-TYPE
This object indicates the number of non-unicast frames sent on an AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.5.1.11Counter64read-onlycurrent
hwWlanApWiredPortOutBytes
OBJECT-TYPE
This object indicates the number of bytes sent on an AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.5.1.12Counter64read-onlycurrent
hwWlanApWiredPortOutErrorsPkts
OBJECT-TYPE
This object indicates the number of error packets sent on an AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.5.1.13Counter64read-onlycurrent
hwWlanApWiredPortOutDiscardPkts
OBJECT-TYPE
This object indicates the number of dropped packets sent on an AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.5.1.14Counter64read-onlycurrent
hwWlanApWiredPortLldpTable
OBJECT-TYPE
This table is used to query LLDP neighbor information of a specified AP. No entry can be created, modified, or deleted in this table.
1.3.6.1.4.1.2011.6.139.13.3.6not-accessiblecurrent
hwWlanApWiredPortLldpEntry
OBJECT-TYPE
The indexes of this table are hwWlanApMac, hwWlanApWiredPortLldpRemLocalPortNum, and hwWlanApWiredPortLldpRemIndex.
1.3.6.1.4.1.2011.6.139.13.3.6.1not-accessiblecurrent
hwWlanApWiredPortLldpRemLocalPortNum
OBJECT-TYPE
This object indicates the local port number of the remote neighbor of the AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.6.1.1Integer32not-accessiblecurrent
hwWlanApWiredPortLldpRemIndex
OBJECT-TYPE
This object indicates the index of the remote neighbor interface of the AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.6.1.2Integer32not-accessiblecurrent
hwWlanApWiredPortLldpRemChassisIdSubtype
OBJECT-TYPE
This object indicates the subtype of the remote neighbor of the AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.6.1.3Integer32read-onlycurrent
hwWlanApWiredPortLldpRemChassisId
OBJECT-TYPE
This object indicates the subtype ID of the remote neighbor of the AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.6.1.4OCTET STRINGread-onlycurrent
hwWlanApWiredPortLldpRemPortIdSubtype
OBJECT-TYPE
This object indicates the subtype of the remote neighbor interface of the AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.6.1.5Integer32read-onlycurrent
hwWlanApWiredPortLldpRemPortId
OBJECT-TYPE
This object indicates the ID of the remote neighbor interface of the AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.6.1.6OCTET STRINGread-onlycurrent
hwWlanApWiredPortLldpRemPortDesc
OBJECT-TYPE
This object indicates descriptions about the remote neighbor interface of the AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.6.1.7OCTET STRINGread-onlycurrent
hwWlanApWiredPortLldpRemSysName
OBJECT-TYPE
This object indicates the system name of the remote neighbor of the AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.6.1.8OCTET STRINGread-onlycurrent
hwWlanApWiredPortLldpRemSysDesc
OBJECT-TYPE
This object indicates system descriptions about the remote neighbor of the AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.6.1.9OCTET STRINGread-onlycurrent
hwWlanApWiredPortLldpRemSysCapSupported
OBJECT-TYPE
This object indicates whether the remote neighbor of the AP's wired interface supports the system capability.
1.3.6.1.4.1.2011.6.139.13.3.6.1.10Integer32read-onlycurrent
hwWlanApWiredPortLldpRemSysCapEnabled
OBJECT-TYPE
This object enables the system capability of the remote neighbor of the AP's wired interface.
1.3.6.1.4.1.2011.6.139.13.3.6.1.11Integer32read-onlycurrent
hwWlanApWiredPortLldpRemLocalApId
OBJECT-TYPE
This object indicates the AP ID.
1.3.6.1.4.1.2011.6.139.13.3.6.1.12Integer32read-onlycurrent
hwWlanApWiredPortLldpRemManAddrTable
OBJECT-TYPE
This table is used to query management addresses of LLDP neighbors of a specified AP. No entry can be created, modified, or deleted in this table.
1.3.6.1.4.1.2011.6.139.13.3.7not-accessiblecurrent
hwWlanApWiredPortLldpRemManAddrEntry
OBJECT-TYPE
The indexes of this table are hwWlanApMac, hwWlanApWiredPortLldpRemLocalPortNum, hwWlanApWiredPortLldpRemIndex, hwWlanApWiredPortLldpRemManAddrSubtype, and hwWlanApWiredPortLldpRemManAddr.
1.3.6.1.4.1.2011.6.139.13.3.7.1not-accessiblecurrent
hwWlanApWiredPortLldpRemManAddrSubtype
OBJECT-TYPE
This object indicates the This object indicates the remote management address subtype of the wired interface.
1.3.6.1.4.1.2011.6.139.13.3.7.1.1Integer32not-accessiblecurrent
hwWlanApWiredPortLldpRemManAddr
OBJECT-TYPE
This object indicates the remote management address of the wired interface.
1.3.6.1.4.1.2011.6.139.13.3.7.1.2OCTET STRINGnot-accessiblecurrent
hwWlanApWiredPortLldpRemManAddrIfSubtype
OBJECT-TYPE
This object indicates the interface subtype of the remote management address of the wired interface.
1.3.6.1.4.1.2011.6.139.13.3.7.1.3Integer32read-onlycurrent
hwWlanApWiredPortLldpRemManAddrIfId
OBJECT-TYPE
This object indicates the interface ID of the remote management address of the wired interface.
1.3.6.1.4.1.2011.6.139.13.3.7.1.4Integer32read-onlycurrent
hwWlanApWiredPortLldpRemManAddrOID
OBJECT-TYPE
This object indicates the remote management address OID of the wired interface.
1.3.6.1.4.1.2011.6.139.13.3.7.1.5OCTET STRINGread-onlycurrent
hwWlanApOnlineFailTable
OBJECT-TYPE
This table is used to query or clear AP online failure records, including failure time and reason.
1.3.6.1.4.1.2011.6.139.13.3.8not-accessiblecurrent
hwWlanApOnlineFailEntry
OBJECT-TYPE
The index of this table is hwWlanApOnlineFailMac.
1.3.6.1.4.1.2011.6.139.13.3.8.1not-accessiblecurrent
hwWlanApOnlineFailMac
OBJECT-TYPE
This object indicates the MAC address of the STA who fails to go online.
1.3.6.1.4.1.2011.6.139.13.3.8.1.1MacAddressnot-accessiblecurrent
hwWlanApOnlineFailTime
OBJECT-TYPE
This object indicates the latest time when the STA fails to go online.
1.3.6.1.4.1.2011.6.139.13.3.8.1.2OCTET STRINGread-onlycurrent
hwWlanApOnlineFailReason
OBJECT-TYPE
This object indicates the reason for the latest STA online failure.
1.3.6.1.4.1.2011.6.139.13.3.8.1.3OCTET STRINGread-onlycurrent
hwWlanApOnlineFailRowStatus
OBJECT-TYPE
This object indicates that online failure records of STAs are deleted based on MAC addresses.
1.3.6.1.4.1.2011.6.139.13.3.8.1.4RowStatusread-writecurrent
hwWlanApOnlineFailInfo
OBJECT-TYPE
This object indicates information about the last three online failures of an AP, including the failure time and reasons.
1.3.6.1.4.1.2011.6.139.13.3.8.1.5OCTET STRINGread-onlycurrent
hwWlanApOfflineTable
OBJECT-TYPE
This table is used to query or clear AP offline records, including offline time and reason.
1.3.6.1.4.1.2011.6.139.13.3.9not-accessiblecurrent
hwWlanApOfflineEntry
OBJECT-TYPE
The index of this table is hwWlanApOfflineMac.
1.3.6.1.4.1.2011.6.139.13.3.9.1not-accessiblecurrent
hwWlanApOfflineMac
OBJECT-TYPE
This object indicates the MAC address of an AP.
1.3.6.1.4.1.2011.6.139.13.3.9.1.1MacAddressnot-accessiblecurrent
hwWlanApOfflineTime
OBJECT-TYPE
This object indicates the AP offline time.
1.3.6.1.4.1.2011.6.139.13.3.9.1.2OCTET STRINGread-onlycurrent
hwWlanApOfflineReason
OBJECT-TYPE
This object indicates the AP offline reason.
1.3.6.1.4.1.2011.6.139.13.3.9.1.3OCTET STRINGread-onlycurrent
hwWlanApOfflineRowStatus
OBJECT-TYPE
This object clears AP offline records.
1.3.6.1.4.1.2011.6.139.13.3.9.1.4RowStatusread-createcurrent
hwWlanApOfflineInfo
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.6.139.13.3.9.1.5OCTET STRINGread-onlycurrent
hwWlanIDIndexedApTable
OBJECT-TYPE
This table is used to add, delete, modify, reset, or confirm APs. You can also use the table to query the configuration and restore factory settings of APs.
1.3.6.1.4.1.2011.6.139.13.3.10not-accessiblecurrent
hwWlanIDIndexedApEntry
OBJECT-TYPE
The index of this table is hwWlanIDIndexedApId.
1.3.6.1.4.1.2011.6.139.13.3.10.1not-accessiblecurrent
hwWlanIDIndexedApId
OBJECT-TYPE
Ap ID.
1.3.6.1.4.1.2011.6.139.13.3.10.1.1Unsigned32accessible-for-notifycurrent
hwWlanIDIndexedApMac
OBJECT-TYPE
This object indicates the MAC address of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.2MacAddressread-writecurrent
hwWlanIDIndexedApSn
OBJECT-TYPE
This object indicates the sequence number (SN) of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.3OCTET STRINGread-writecurrent
hwWlanIDIndexedApTypeInfo
OBJECT-TYPE
This object indicates the AP type.
1.3.6.1.4.1.2011.6.139.13.3.10.1.4OCTET STRINGread-writecurrent
hwWlanIDIndexedApName
OBJECT-TYPE
This object indicates the AP name.
1.3.6.1.4.1.2011.6.139.13.3.10.1.5OCTET STRINGread-writecurrent
hwWlanIDIndexedApGroup
OBJECT-TYPE
This object indicates the group to which an AP belongs.
1.3.6.1.4.1.2011.6.139.13.3.10.1.6OCTET STRINGread-writecurrent
hwWlanIDIndexedApRunState
OBJECT-TYPE
This object indicates the AP state.
1.3.6.1.4.1.2011.6.139.13.3.10.1.7INTEGER {idle(1), autofind(2), typeNotMatch(3), fault(4), config(5), configFailed(6), download(7), normal(8), committing(9), commitFailed(10), standby(11), verMismatch(12), nameConflicted(13), invalid(14), countryCodeMismatch(15)}read-onlycurrent
hwWlanIDIndexedApSoftwareVersion
OBJECT-TYPE
This object indicates the AP software version.
1.3.6.1.4.1.2011.6.139.13.3.10.1.8OCTET STRINGread-onlycurrent
hwWlanIDIndexedApHardwareVersion
OBJECT-TYPE
This object indicates the AP hardware version.
1.3.6.1.4.1.2011.6.139.13.3.10.1.9OCTET STRINGread-onlycurrent
hwWlanIDIndexedApCpuType
OBJECT-TYPE
This object indicates the CPU type of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.10OCTET STRINGread-onlycurrent
hwWlanIDIndexedApCpufrequency
OBJECT-TYPE
This object indicates the CPU frequency of an AP.Unit: MHz.
1.3.6.1.4.1.2011.6.139.13.3.10.1.11Integer32read-onlycurrent
hwWlanIDIndexedApMemoryType
OBJECT-TYPE
This object indicates the memory type of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.12OCTET STRINGread-onlycurrent
hwWlanIDIndexedApDomain
OBJECT-TYPE
This object indicates the AP domain.
1.3.6.1.4.1.2011.6.139.13.3.10.1.13OCTET STRINGread-onlycurrent
hwWlanIDIndexedApIpAddress
OBJECT-TYPE
This object indicates the IP address of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.14IpAddressread-onlycurrent
hwWlanIDIndexedApIpNetMask
OBJECT-TYPE
This object indicates the IP address mask of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.15IpAddressread-onlycurrent
hwWlanIDIndexedApGatewayIp
OBJECT-TYPE
This object indicates the gateway IP address of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.16IpAddressread-onlycurrent
hwWlanIDIndexedApMemorySize
OBJECT-TYPE
This object indicates the memory size of an AP.Unit: MB.
1.3.6.1.4.1.2011.6.139.13.3.10.1.17Integer32read-onlycurrent
hwWlanIDIndexedApFlashSize
OBJECT-TYPE
This object indicates the flash memory size of an AP.Unit: MB.
1.3.6.1.4.1.2011.6.139.13.3.10.1.18Integer32read-onlycurrent
hwWlanIDIndexedApRunTime
OBJECT-TYPE
This object indicates the running time of an AP.Unit: tick.
1.3.6.1.4.1.2011.6.139.13.3.10.1.19Unsigned32read-onlycurrent
hwWlanIDIndexedApAdminOper
OBJECT-TYPE
This object indicates administrative status of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.20INTEGER {reset(1), manufacturerConfig(3)}read-createcurrent
hwWlanIDIndexedApDNS
OBJECT-TYPE
This object indicates the AP DNS.
1.3.6.1.4.1.2011.6.139.13.3.10.1.21IpAddressread-onlycurrent
hwWlanIDIndexedApOnlineTime
OBJECT-TYPE
This object indicates online duration of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.22Unsigned32read-onlycurrent
hwWlanIDIndexedApSysSoftwareDesc
OBJECT-TYPE
This object indicates system software description of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.23OCTET STRINGread-onlycurrent
hwWlanIDIndexedApSysHardtwareDesc
OBJECT-TYPE
This object indicates system hardware description of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.24OCTET STRINGread-onlycurrent
hwWlanIDIndexedApSysManufacture
OBJECT-TYPE
This object indicates the manufacturer of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.25OCTET STRINGread-onlycurrent
hwWlanIDIndexedApSysSoftwareName
OBJECT-TYPE
This object indicates software name of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.26OCTET STRINGread-onlycurrent
hwWlanIDIndexedApSysSoftwareVendor
OBJECT-TYPE
This object indicates the manufacturer of the AP software.
1.3.6.1.4.1.2011.6.139.13.3.10.1.27OCTET STRINGread-onlycurrent
hwWlanIDIndexedApBomCode
OBJECT-TYPE
This object indicates the BOM code.
1.3.6.1.4.1.2011.6.139.13.3.10.1.28OCTET STRINGread-onlycurrent
hwWlanIDIndexedApIpv6Address
OBJECT-TYPE
This object indicates the IPv6 address.
1.3.6.1.4.1.2011.6.139.13.3.10.1.29OCTET STRINGread-onlycurrent
hwWlanIDIndexedApIpv6NetMask
OBJECT-TYPE
This object indicates the IPv6 address mask.
1.3.6.1.4.1.2011.6.139.13.3.10.1.30OCTET STRINGread-onlycurrent
hwWlanIDIndexedApGatewayIpv6
OBJECT-TYPE
This object indicates the IPv6 gateway.
1.3.6.1.4.1.2011.6.139.13.3.10.1.31OCTET STRINGread-onlycurrent
hwWlanIDIndexedApIpv6DNS
OBJECT-TYPE
This object indicates the IPv6 DNS.
1.3.6.1.4.1.2011.6.139.13.3.10.1.32OCTET STRINGread-onlycurrent
hwWlanIDIndexedApProtectAcIPv6Addr
OBJECT-TYPE
This object indicates the IPv6 address of the standby AC.
1.3.6.1.4.1.2011.6.139.13.3.10.1.33OCTET STRINGread-onlycurrent
hwWlanIDIndexedApBootCountTotal
OBJECT-TYPE
This object indicates the total number of times an AP is restarted.
1.3.6.1.4.1.2011.6.139.13.3.10.1.34Integer32read-onlycurrent
hwWlanIDIndexedApBootCountPowerOff
OBJECT-TYPE
This object indicates the number of times an AP is restarted due to a power failure.
1.3.6.1.4.1.2011.6.139.13.3.10.1.35Integer32read-onlycurrent
hwWlanIDIndexedApBootCountClear
OBJECT-TYPE
This object clears the AP restart count.
1.3.6.1.4.1.2011.6.139.13.3.10.1.36RowStatusread-createcurrent
hwWlanIDIndexedApElectronicLabel
OBJECT-TYPE
This object indicates the electronic label of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.37OCTET STRING (SIZE(0..3073))read-onlycurrent
hwWlanIDIndexedApWiredPortNum
OBJECT-TYPE
This object indicates the total number of wired interfaces.
1.3.6.1.4.1.2011.6.139.13.3.10.1.38Integer32read-onlycurrent
hwWlanIDIndexedApWiredPortMtu
OBJECT-TYPE
This object indicates the maximum transmit unit (MTU) of a wired interface.
1.3.6.1.4.1.2011.6.139.13.3.10.1.39Integer32read-onlycurrent
hwWlanIDIndexedApWiredPortMac
OBJECT-TYPE
This object indicates the MAC address of a wired interface.
1.3.6.1.4.1.2011.6.139.13.3.10.1.40MacAddressread-onlycurrent
hwWlanIDIndexedApMemoryUseRate
OBJECT-TYPE
This object indicates the memory usage.Unit: %.
1.3.6.1.4.1.2011.6.139.13.3.10.1.41Integer32read-onlycurrent
hwWlanIDIndexedApCpuUseRate
OBJECT-TYPE
This object indicates the CPU usage.Unit: %.
1.3.6.1.4.1.2011.6.139.13.3.10.1.42Integer32read-onlycurrent
hwWlanIDIndexedApFlashFreeSize
OBJECT-TYPE
This object indicates available space in the flash memory.Unit: KB.
1.3.6.1.4.1.2011.6.139.13.3.10.1.43Integer32read-onlycurrent
hwWlanIDIndexedApTemperature
OBJECT-TYPE
This object indicates the operating temperature.
1.3.6.1.4.1.2011.6.139.13.3.10.1.44Integer32read-onlycurrent
hwWlanIDIndexedApOnlineUserNum
OBJECT-TYPE
This object indicates the number of online users.
1.3.6.1.4.1.2011.6.139.13.3.10.1.45Integer32read-onlycurrent
hwWlanIDIndexedApDualBandAssoc5gStaNum
OBJECT-TYPE
This object indicates the number of dual-band terminals that access the 5 GHz radio.
1.3.6.1.4.1.2011.6.139.13.3.10.1.46Unsigned32read-onlycurrent
hwWlanIDIndexedApDualBandStaNum
OBJECT-TYPE
This object indicates the number of STAs that support dual frequency bands.
1.3.6.1.4.1.2011.6.139.13.3.10.1.47Unsigned32read-onlycurrent
hwWlanIDIndexedApStaOnlineFailRatio
OBJECT-TYPE
This object indicates STA online failure ratio on an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.48Unsigned32read-onlycurrent
hwWlanIDIndexedApStaOfflineRatio
OBJECT-TYPE
This object indicates STA offline ratio of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.49Unsigned32read-onlycurrent
hwWlanIDIndexedApStickyClientRatio
OBJECT-TYPE
This object indicates the proportion of sticky STAs to all STAs.
1.3.6.1.4.1.2011.6.139.13.3.10.1.50Unsigned32read-onlycurrent
hwWlanIDIndexedApUpEthPortSpeed
OBJECT-TYPE
This object indicates the rate of an upstream Ethernet interface.
1.3.6.1.4.1.2011.6.139.13.3.10.1.51INTEGER {speed10(1), speed100(2), speed1000(3), speed10000(4)}read-onlycurrent
hwWlanIDIndexedApUpEthPortSpeedMode
OBJECT-TYPE
This object indicates the rate mode of an upstream Ethernet interface.
1.3.6.1.4.1.2011.6.139.13.3.10.1.52INTEGER {auto(1), forced(2)}read-onlycurrent
hwWlanIDIndexedApUpEthPortDuplex
OBJECT-TYPE
This object indicates the duplex state of an upstream Ethernet interface.
1.3.6.1.4.1.2011.6.139.13.3.10.1.53INTEGER {half(1), full(2)}read-onlycurrent
hwWlanIDIndexedApUpEthPortDuplexMode
OBJECT-TYPE
This object indicates the duplex mode of an upstream Ethernet interface.
1.3.6.1.4.1.2011.6.139.13.3.10.1.54INTEGER {auto(1), forced(2)}read-onlycurrent
hwWlanIDIndexedApUpPortSpeed
OBJECT-TYPE
This object indicates the real-time rate of an upstream interface.Unit: Kbps.
1.3.6.1.4.1.2011.6.139.13.3.10.1.55Integer32read-onlycurrent
hwWlanIDIndexedAPUpPortPER
OBJECT-TYPE
This object indicates the packet error rate of an upstream interface.
1.3.6.1.4.1.2011.6.139.13.3.10.1.56Integer32read-onlycurrent
hwWlanIDIndexedEthportUpRate
OBJECT-TYPE
This object indicates the upstream rate of an Ethernet interface.
1.3.6.1.4.1.2011.6.139.13.3.10.1.57Integer32read-onlycurrent
hwWlanIDIndexedEthportDownRate
OBJECT-TYPE
This object indicates the downstream rate of an Ethernet interface.
1.3.6.1.4.1.2011.6.139.13.3.10.1.58Integer32read-onlycurrent
hwWlanIDIndexedApAirportUpTraffic
OBJECT-TYPE
This object indicates the traffic volume on an upstream wireless interface.Unit: bytes. The value is reported in 64 bits.
1.3.6.1.4.1.2011.6.139.13.3.10.1.59OCTET STRINGread-onlycurrent
hwWlanIDIndexedApAirportDwTraffic
OBJECT-TYPE
This object indicates the traffic volume on a downstream wireless interface.Unit: bytes. The value is reported in 64 bits.
1.3.6.1.4.1.2011.6.139.13.3.10.1.60OCTET STRINGread-onlycurrent
hwWlanIDIndexedApEthportDwTraffic
OBJECT-TYPE
This object indicates the traffic volume on a downstream wired interface.Unit: bytes. The value is reported in 64 bits.
1.3.6.1.4.1.2011.6.139.13.3.10.1.61OCTET STRINGread-onlycurrent
hwWlanIDIndexedApEthportUpTraffic
OBJECT-TYPE
This object indicates the traffic volume on an upstream wired interface.Unit: bytes. The value is reported in 64 bits.
1.3.6.1.4.1.2011.6.139.13.3.10.1.62OCTET STRINGread-onlycurrent
hwWlanIDIndexedApUpPortRecvPackets
OBJECT-TYPE
This object indicates the total number of frames received on an upstream interface, which is extended to 64 bits.
1.3.6.1.4.1.2011.6.139.13.3.10.1.63Counter64read-onlycurrent
hwWlanIDIndexedApUpPortSendPackets
OBJECT-TYPE
This object indicates the total number of frames sent on an upstream interface, which is extended to 64 bits.
1.3.6.1.4.1.2011.6.139.13.3.10.1.64Counter64read-onlycurrent
hwWlanIDIndexedApUpPortRecvBytes
OBJECT-TYPE
This object indicates the total number of bytes received on an upstream interface.
1.3.6.1.4.1.2011.6.139.13.3.10.1.65Counter64read-onlycurrent
hwWlanIDIndexedApUpPortSendBytes
OBJECT-TYPE
This object indicates the total number of bytes sent on an upstream interface.
1.3.6.1.4.1.2011.6.139.13.3.10.1.66Counter64read-onlycurrent
hwWlanIDIndexedCentralApId
OBJECT-TYPE
This object indicates the central AP ID.
1.3.6.1.4.1.2011.6.139.13.3.10.1.67Unsigned32read-onlycurrent
hwWlanIDIndexedCentralApMac
OBJECT-TYPE
This object indicates the MAC address of an central AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.68MacAddressread-onlycurrent
hwWlanIDIndexedCentralApName
OBJECT-TYPE
This object indicates the central AP name.
1.3.6.1.4.1.2011.6.139.13.3.10.1.69OCTET STRINGread-onlycurrent
hwWlanIDIndexedApRowstatus
OBJECT-TYPE
This object indicates the row status.
1.3.6.1.4.1.2011.6.139.13.3.10.1.70RowStatusread-createcurrent
hwWlanIDIndexedApSDCardSize
OBJECT-TYPE
This object indicates the SD card size of an AP.Unit: MB.
1.3.6.1.4.1.2011.6.139.13.3.10.1.71Integer32read-onlycurrent
hwWlanIDIndexedAPLongitude
OBJECT-TYPE
This object indicates the longitude of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.72OCTET STRINGread-onlycurrent
hwWlanIDIndexedAPLatitude
OBJECT-TYPE
This object indicates the latitude of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.73OCTET STRINGread-onlycurrent
hwWlanIDIndexedAPUUIDString
OBJECT-TYPE
This object indicates the UUID string value of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.74OCTET STRING (SIZE(0..16))read-writecurrent
hwWlanIDIndexedAPUUIDHex
OBJECT-TYPE
This object indicates the UUID Hex value of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.75OCTET STRING (SIZE(0..32))read-writecurrent
hwWlanIDIndexedApChannelLoadMode
OBJECT-TYPE
This object indicates channel lode mode. The default value is outdoor.
1.3.6.1.4.1.2011.6.139.13.3.10.1.76INTEGER {indoor(1), outdoor(2), outToindoor(3)}read-onlycurrent
hwWlanIDIndexedAPPoeWorkmode
OBJECT-TYPE
This object indicates the work mode of POE.
1.3.6.1.4.1.2011.6.139.13.3.10.1.77INTEGER {af(1), at(2), bt(3), invalid(4), bt60(5), bt90(6)}read-onlycurrent
hwWlanIDIndexedAPPoeExpectedWorkmode
OBJECT-TYPE
This object indicates the expected work mode of POE.
1.3.6.1.4.1.2011.6.139.13.3.10.1.78INTEGER {af(1), at(2), bt(3), invalid(4), bt60(5), bt90(6)}read-onlycurrent
hwWlanIDIndexedApTotalOnlineTime
OBJECT-TYPE
This object indicates total online duration of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.79Unsigned32read-onlycurrent
hwWlanIDIndexedApDiscoverTime
OBJECT-TYPE
This object indicates discover duration of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.80Unsigned32read-onlycurrent
hwWlanIDIndexedApSiteCode
OBJECT-TYPE
This object indicates the Site code of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.81OCTET STRING (SIZE(0..14))read-writecurrent
hwWlanIDIndexedApDomainName
OBJECT-TYPE
This object indicates the Domain name of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.82OCTET STRING (SIZE(0..255))read-writecurrent
hwWlanIDIndexedApBranchGroup
OBJECT-TYPE
This object indicates the branch group name of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.83OCTET STRINGread-writecurrent
hwWlanIDIndexedApNatIpAddress
OBJECT-TYPE
This object indicates the Nat IP address of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.84IpAddressread-onlycurrent
hwWlanIDIndexedApStaOnlineFailStatistics
OBJECT-TYPE
This object indicates the Statistics of station online fail.
1.3.6.1.4.1.2011.6.139.13.3.10.1.85OCTET STRING (SIZE(0..1500))read-onlycurrent
hwWlanIDIndexedApStaOfflineStatistics
OBJECT-TYPE
This object indicates the Statistics of station offline fail.
1.3.6.1.4.1.2011.6.139.13.3.10.1.86OCTET STRING (SIZE(0..1500))read-onlycurrent
hwWlanIDIndexedAPPowerSupplyState
OBJECT-TYPE
This object indicates the AP power supply state. In Limited state, some functions are limited. In Disabled state, all radios are off, and some WLAN functions are unavailable.
1.3.6.1.4.1.2011.6.139.13.3.10.1.87INTEGER {full(1), disabled(2), limited(3), invalid(4)}read-onlycurrent
hwWlanIDIndexedApMajorString
OBJECT-TYPE
This object indicates the string type value of Major field in the BLE broadcast frame of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.88OCTET STRING (SIZE(0..2))read-writecurrent
hwWlanIDIndexedApMajorHex
OBJECT-TYPE
This object indicates the hex type value of Major field in the BLE broadcast frame of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.89OCTET STRING (SIZE(0..4))read-writecurrent
hwWlanIDIndexedApMajorDecimal
OBJECT-TYPE
This object indicates the decimal type value of Major field in the BLE broadcast frame of an AP. The default value is -1.
1.3.6.1.4.1.2011.6.139.13.3.10.1.90Integer32 (-1 | 0..65535)read-writecurrent
hwWlanIDIndexedApMinorString
OBJECT-TYPE
This object indicates the string type value of Minor field in the BLE broadcast frame of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.91OCTET STRING (SIZE(0..2))read-writecurrent
hwWlanIDIndexedApMinorHex
OBJECT-TYPE
This object indicates the hex type value of Minor field in the BLE broadcast frame of an AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.92OCTET STRING (SIZE(0..4))read-writecurrent
hwWlanIDIndexedApMinorDecimal
OBJECT-TYPE
This object indicates the decimal type value of Minor field in the BLE broadcast frame of an AP. The default value is -1.
1.3.6.1.4.1.2011.6.139.13.3.10.1.93Integer32 (-1 | 0..65535)read-writecurrent
hwWlanIDIndexedApReferenceRSSI
OBJECT-TYPE
This object indicates the RSSI value of an AP. The default value is 0.
1.3.6.1.4.1.2011.6.139.13.3.10.1.94Integer32 (-97..-50 | 0)read-writecurrent
hwWlanIDIndexedApEnvironmentTemperature
OBJECT-TYPE
This object indicates the ambient temperature.
1.3.6.1.4.1.2011.6.139.13.3.10.1.95Integer32read-onlycurrent
hwWlanIDIndexedApCpuTemperature
OBJECT-TYPE
This object indicates the CPU temperature.
1.3.6.1.4.1.2011.6.139.13.3.10.1.96Integer32read-onlycurrent
hwWlanIDIndexedApNpTemperature
OBJECT-TYPE
This object indicates the NP chip temperature.
1.3.6.1.4.1.2011.6.139.13.3.10.1.97Integer32read-onlycurrent
hwWlanIDIndexedApZoneName
OBJECT-TYPE
This object indicates the AP zone name.
1.3.6.1.4.1.2011.6.139.13.3.10.1.98OCTET STRING (SIZE(0..35))read-writecurrent
hwWlanIDIndexedApDataLinkState
OBJECT-TYPE
This object indicates the state of an AP data link.
1.3.6.1.4.1.2011.6.139.13.3.10.1.99INTEGER {down(1), run(2), noneed(3)}read-onlycurrent
hwWlanIDIndexedApRtuStatus
OBJECT-TYPE
This object indicates the AP RTU status.
1.3.6.1.4.1.2011.6.139.13.3.10.1.100INTEGER {downloading(1), active(2), notActive(3), invalidLicense(4), flashMemoryNotEnough(5), notSupport(6), noLicenseOnAP(7), noLicenseOnAC(8), invalidStatus(255)}read-onlycurrent
hwWlanIDIndexedApRadioMode
OBJECT-TYPE
This object indicates the actual radio switch-mode of AP.
1.3.6.1.4.1.2011.6.139.13.3.10.1.101INTEGER {twoRadioStandard(1), twoRadio5gEnhanced(2), twoRadio2gEnhanced(3), threeRadio(4), twoRadioIndependentScan(5), notSupport(255)}read-onlycurrent
hwWlanApOnlineFailReasonTable
OBJECT-TYPE
This table is used to get AP online fail reason counts.
1.3.6.1.4.1.2011.6.139.13.3.11not-accessiblecurrent
hwWlanApOnlineFailReasonEntry
OBJECT-TYPE
This table is used to get AP online fail reason counts.
1.3.6.1.4.1.2011.6.139.13.3.11.1not-accessiblecurrent
hwWlanApOnlineFailReasonIndex
OBJECT-TYPE
This object indicates the AP online fail reason index.
1.3.6.1.4.1.2011.6.139.13.3.11.1.1Integer32not-accessiblecurrent
hwWlanApOnlineFailReasonDesc
OBJECT-TYPE
This object indicates the AP online fail reason description.
1.3.6.1.4.1.2011.6.139.13.3.11.1.2OCTET STRINGread-onlycurrent
hwWlanApOnlineFailReasonCount
OBJECT-TYPE
This object indicates the the AP online fail reason counts.
1.3.6.1.4.1.2011.6.139.13.3.11.1.3Integer32read-onlycurrent
hwWlanApOfflineReasonTable
OBJECT-TYPE
This table is used to get AP offline reason counts.
1.3.6.1.4.1.2011.6.139.13.3.12not-accessiblecurrent
hwWlanApOfflineReasonEntry
OBJECT-TYPE
This table is used to get AP offline reason counts.
1.3.6.1.4.1.2011.6.139.13.3.12.1not-accessiblecurrent
hwWlanApOfflineReasonIndex
OBJECT-TYPE
This object indicates the AP offline reason index.
1.3.6.1.4.1.2011.6.139.13.3.12.1.1Integer32not-accessiblecurrent
hwWlanApOfflineReasonDesc
OBJECT-TYPE
This object indicates the AP offline reason description.
1.3.6.1.4.1.2011.6.139.13.3.12.1.2OCTET STRINGread-onlycurrent
hwWlanApOfflineReasonCount
OBJECT-TYPE
This object indicates the AP offline reason counts.
1.3.6.1.4.1.2011.6.139.13.3.12.1.3Integer32read-onlycurrent
hwWlanAPConformance
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.13.4
hwWlanAPCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.13.4.1
hwWlanAPObjectGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2011.6.139.13.4.2

Notifications

NameOIDStatus
hwApFaultTrap
NOTIFICATION-TYPE
The object indicates an AP communication fault alarm.
1.3.6.1.4.1.2011.6.139.13.1.1.1current
hwApNormalTrap
NOTIFICATION-TYPE
This object indicates an AP communication fault clear alarm.
1.3.6.1.4.1.2011.6.139.13.1.1.2current
hwApPingResultTrap
NOTIFICATION-TYPE
This object indicates an AP ping result alarm.
1.3.6.1.4.1.2011.6.139.13.1.1.3current
hwApConfigCommitTrap
NOTIFICATION-TYPE
This object indicates that the configuration of an AP is successfully committed.
1.3.6.1.4.1.2011.6.139.13.1.1.4current
hwUnAuthorizedApRecordExistTrap
NOTIFICATION-TYPE
This object indicates that unauthorized AP alarms exist.
1.3.6.1.4.1.2011.6.139.13.1.1.5current
hwUnAuthorizedApRecordClearTrap
NOTIFICATION-TYPE
This object indicates that unauthorized AP alarms are cleared.
1.3.6.1.4.1.2011.6.139.13.1.1.6current
hwApCpuOverloadTrap
NOTIFICATION-TYPE
This object indicates that the CPU usage of an AP exceeds the upper threshold.
1.3.6.1.4.1.2011.6.139.13.1.1.7current
hwApCpuOverloadRestoreTrap
NOTIFICATION-TYPE
This object indicates that an AP's CPU usage restores to the allowed range.
1.3.6.1.4.1.2011.6.139.13.1.1.8current
hwApMemoryOverloadTrap
NOTIFICATION-TYPE
This object indicates that the memory usage of an AP exceeds the upper threshold.
1.3.6.1.4.1.2011.6.139.13.1.1.9current
hwApMemoryOverloadRestoreTrap
NOTIFICATION-TYPE
This object indicates that the memory usage of an AP restores to the allowed range.
1.3.6.1.4.1.2011.6.139.13.1.1.10current
hwApStaFullTrap
NOTIFICATION-TYPE
This object indicates that new STAs cannot associate with an AP.
1.3.6.1.4.1.2011.6.139.13.1.1.11current
hwApStaFullRecoverTrap
NOTIFICATION-TYPE
This object indicates that new STAs can associate with an AP.
1.3.6.1.4.1.2011.6.139.13.1.1.12current
hwAcDevicesSwitchTrap
NOTIFICATION-TYPE
This object that an active/standby AC switchover occurs.
1.3.6.1.4.1.2011.6.139.13.1.1.13current
hwDyingGaspTrap
NOTIFICATION-TYPE
This object indicates a dying gasp alarm.
1.3.6.1.4.1.2011.6.139.13.1.1.14current
hwApFaultTrapFat
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.2011.6.139.13.1.1.15current
hwApNormalTrapFat
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.2011.6.139.13.1.1.16current
hwApTemperatureTooLowTrap
NOTIFICATION-TYPE
This object indicates that the temperature is too low.
1.3.6.1.4.1.2011.6.139.13.1.1.17current
hwApTemperatureTooLowRestoreTrap
NOTIFICATION-TYPE
This object indicates that the temperature restores to the normal range.
1.3.6.1.4.1.2011.6.139.13.1.1.18current
hwApTemperatureTooHighTrap
NOTIFICATION-TYPE
This object indicates that the temperature is too high.
1.3.6.1.4.1.2011.6.139.13.1.1.19current
hwApTemperatureTooHighRestoreTrap
NOTIFICATION-TYPE
This object indicates that the temperature restores to the normal range.
1.3.6.1.4.1.2011.6.139.13.1.1.20current
hwApOpticalRxPowerTooHighTrap
NOTIFICATION-TYPE
This object indicates that the receive power of an AP's optical module is too high.
1.3.6.1.4.1.2011.6.139.13.1.1.21current
hwApOpticalRxPowerTooHighRestoreTrap
NOTIFICATION-TYPE
This object indicates that the receive power of an AP's optical module restores to the normal range.
1.3.6.1.4.1.2011.6.139.13.1.1.22current
hwApOpticalRxPowerTooLowTrap
NOTIFICATION-TYPE
This object indicates that the receive power of an AP's optical module is too low.
1.3.6.1.4.1.2011.6.139.13.1.1.23current
hwApOpticalRxPowerTooLowRestoreTrap
NOTIFICATION-TYPE
This object indicates that the receive power of an AP's optical module restores to the normal range.
1.3.6.1.4.1.2011.6.139.13.1.1.24current
hwApOpticalTemperatureTooHighTrap
NOTIFICATION-TYPE
This object indicates that the temperature of an AP's optical module is too high.
1.3.6.1.4.1.2011.6.139.13.1.1.25current
hwApOpticalTemperatureTooHighRestoreTrap
NOTIFICATION-TYPE
This object indicates that the temperature of an AP's optical module restores to the normal range.
1.3.6.1.4.1.2011.6.139.13.1.1.26current
hwApOpticalTemperatureTooLowTrap
NOTIFICATION-TYPE
This object indicates that the temperature of an AP's optical module is too low.
1.3.6.1.4.1.2011.6.139.13.1.1.27current
hwApOpticalTemperatureTooLowRestoreTrap
NOTIFICATION-TYPE
This object indicates that the temperature of an AP's optical module restores to the normal range.
1.3.6.1.4.1.2011.6.139.13.1.1.28current
hwApNotSupportCountryCodeTrap
NOTIFICATION-TYPE
This object indicates that the country code is not supported.
1.3.6.1.4.1.2011.6.139.13.1.1.29current
hwApColdBootTrap
NOTIFICATION-TYPE
This object indicates a cold restart alarm.
1.3.6.1.4.1.2011.6.139.13.1.1.30current
hwApColdBootRestoreTrap
NOTIFICATION-TYPE
This object indicates a cold restart clear alarm.
1.3.6.1.4.1.2011.6.139.13.1.1.31current
hwApHotBootTrap
NOTIFICATION-TYPE
This object indicates a hot restart alarm.
1.3.6.1.4.1.2011.6.139.13.1.1.32current
hwApHotBootRestoreTrap
NOTIFICATION-TYPE
This object indicates a hot restart clear alarm.
1.3.6.1.4.1.2011.6.139.13.1.1.33current
hwApCRCTooHighTrap
NOTIFICATION-TYPE
This object indicates a CRC error alarm.
1.3.6.1.4.1.2011.6.139.13.1.1.34current
hwApCRCTooHighRestoreTrap
NOTIFICATION-TYPE
This object indicates that CRC error alarms are cleared.
1.3.6.1.4.1.2011.6.139.13.1.1.35current
hwApConflictApNameTrap
NOTIFICATION-TYPE
This object indicates an alarm of AP name conflict.
1.3.6.1.4.1.2011.6.139.13.1.1.36current
hwApLicenseTrap
NOTIFICATION-TYPE
This object indicates an AP license resource exhaustion alarm.
1.3.6.1.4.1.2011.6.139.13.1.1.37current
hwApFmeaIICFaultTrap
NOTIFICATION-TYPE
This object indicates an FMEA IIC fault alarm.
1.3.6.1.4.1.2011.6.139.13.1.1.38current
hwApFmeaIICFaultRestoreTrap
NOTIFICATION-TYPE
This object indicates that the FMEA IIC fault alarm is cleared.
1.3.6.1.4.1.2011.6.139.13.1.1.39current
hwApFmeaPHYFaultTrap
NOTIFICATION-TYPE
This object indicates an FMEA PHY fault alarm.
1.3.6.1.4.1.2011.6.139.13.1.1.40current
hwApFmeaPHYFaultRestoreTrap
NOTIFICATION-TYPE
This object indicates that the FMEA PHY fault alarm is cleared.
1.3.6.1.4.1.2011.6.139.13.1.1.41current
hwApFmeaFaultTrap
NOTIFICATION-TYPE
This object indicates an FMEA fault alarm.
1.3.6.1.4.1.2011.6.139.13.1.1.42current
hwApFmeaFaultRestoreTrap
NOTIFICATION-TYPE
This object indicates that the FMEA fault alarm is cleared.
1.3.6.1.4.1.2011.6.139.13.1.1.43current
hwApOpticalInsertTrap
NOTIFICATION-TYPE
This object indicates an alarm that is generated when an optical module is installed.
1.3.6.1.4.1.2011.6.139.13.1.1.44current
hwApOpticalRemoveTrap
NOTIFICATION-TYPE
This object indicates an alarm generated due to installation of an optical module is cleared.
1.3.6.1.4.1.2011.6.139.13.1.1.45current
hwApReceivedInvalidArpNewTrap
NOTIFICATION-TYPE
This object indicates that invalid ARP packets are received.
1.3.6.1.4.1.2011.6.139.13.1.1.46current
hwApVersionMismatchTrap
NOTIFICATION-TYPE
This object indicates that the AP version and the AC version do not match.
1.3.6.1.4.1.2011.6.139.13.1.1.47current
hwRadioUploadRemoteCaptureFileTrap
NOTIFICATION-TYPE
This object indicates the alarm on the remote capture result upload result.
1.3.6.1.4.1.2011.6.139.13.1.1.48current
hwMPJoinedOnEthernetTrap
NOTIFICATION-TYPE
This object indicates the alarm when an MP goes online through an Ethernet interface.
1.3.6.1.4.1.2011.6.139.13.1.1.49current
hwMPJoinedOnEthernetRestoreTrap
NOTIFICATION-TYPE
This object indicates the alarm when an MP that went online through an Ethernet interface goes online through an air interface.
1.3.6.1.4.1.2011.6.139.13.1.1.50current
hwMPPJoinedOnAirTrap
NOTIFICATION-TYPE
This object indicates the alarm when an MPP changes to an MP and goes online through an air interface.
1.3.6.1.4.1.2011.6.139.13.1.1.51current
hwMPPJoinedOnAirRestoreTrap
NOTIFICATION-TYPE
This object indicates the alarm when an MPP that went online through an air interface goes online through an Ethernet interface.
1.3.6.1.4.1.2011.6.139.13.1.1.52current
hwApOpticalTxPowerTooHighTrap
NOTIFICATION-TYPE
This object indicates an alarm for high transmit power of the AP's optical module.
1.3.6.1.4.1.2011.6.139.13.1.1.53current
hwApOpticalTxPowerTooHighRestoreTrap
NOTIFICATION-TYPE
This object indicates a clear alarm for transmit power recovery of the AP's optical module.
1.3.6.1.4.1.2011.6.139.13.1.1.54current
hwApOpticalTxPowerTooLowTrap
NOTIFICATION-TYPE
This object indicates an alarm for low transmit power of the AP's optical module.
1.3.6.1.4.1.2011.6.139.13.1.1.55current
hwApOpticalTxPowerTooLowRestoreTrap
NOTIFICATION-TYPE
This object indicates a clear alarm for transmit power recovery of the AP's optical module.
1.3.6.1.4.1.2011.6.139.13.1.1.56current
hwApOnLineNumExceedCardSpecTrap
NOTIFICATION-TYPE
This object indicates the number of online APs on the card has exceeded the maximum value.
1.3.6.1.4.1.2011.6.139.13.1.1.57current
hwApFanInvalidTrap
NOTIFICATION-TYPE
This object indicates a complete failure of a fan.
1.3.6.1.4.1.2011.6.139.13.1.1.58current
hwApFanInvalidRestoreTrap
NOTIFICATION-TYPE
This object indicates that the complete failure of a fan has been rectified.
1.3.6.1.4.1.2011.6.139.13.1.1.59current
hwApStorageDevRemoveTrap
NOTIFICATION-TYPE
This object indicates that the storage card is removed.
1.3.6.1.4.1.2011.6.139.13.1.1.60current
hwApStorageDevInsertTrap
NOTIFICATION-TYPE
This object indicates that the storage card is installed.
1.3.6.1.4.1.2011.6.139.13.1.1.61current
hwApPoePowerOffTrap
NOTIFICATION-TYPE
This object indicates that a port is powered off.
1.3.6.1.4.1.2011.6.139.13.1.1.62current
hwApPoePowerOnTrap
NOTIFICATION-TYPE
This object indicates that a port is powered on.
1.3.6.1.4.1.2011.6.139.13.1.1.63current
hwApPoePdConnectedTrap
NOTIFICATION-TYPE
This object indicates that a port detects a PD connected to it.
1.3.6.1.4.1.2011.6.139.13.1.1.64current
hwApPoePdDisconnectedTrap
NOTIFICATION-TYPE
This object indicates that a port detects disconnection of the attached PD.
1.3.6.1.4.1.2011.6.139.13.1.1.65current
hwApPoePdClassOvercurrentTrap
NOTIFICATION-TYPE
This object indicates that a port detects a PD whose current exceeds the threshold of the corresponding class.
1.3.6.1.4.1.2011.6.139.13.1.1.66current
hwApPoePdPriorityDifferentTrap
NOTIFICATION-TYPE
This object indicates that the priority configured on a port is different from the PD priority.
1.3.6.1.4.1.2011.6.139.13.1.1.67current
hwApPoePowerOverUtilizationThresholdTrap
NOTIFICATION-TYPE
This object indicates that the load power of a PoE slot exceeds the upper limit.
1.3.6.1.4.1.2011.6.139.13.1.1.68current
hwApPoePowerOverUtilizationThresholdRestoreTrap
NOTIFICATION-TYPE
This object indicates that the load power of a PoE slot has fallen below the upper limit.
1.3.6.1.4.1.2011.6.139.13.1.1.69current
hwApSTPAutoShutdownTrap
NOTIFICATION-TYPE
This object indicates that STP detected a loop and shut down the port based on configuration.
1.3.6.1.4.1.2011.6.139.13.1.1.70current
hwApSTPAutoShutdownRestoreTrap
NOTIFICATION-TYPE
This object indicates that the shutdown port has recovered.
1.3.6.1.4.1.2011.6.139.13.1.1.71current
hwApOpticalInvalidTrap
NOTIFICATION-TYPE
This object indicates that the optical transceiver does not work normally.
1.3.6.1.4.1.2011.6.139.13.1.1.72current
hwApOpticalInvalidRestoreTrap
NOTIFICATION-TYPE
This object indicates that the optical transceiver has restored.
1.3.6.1.4.1.2011.6.139.13.1.1.73current
hwApVapStaFullTrap
NOTIFICATION-TYPE
This object indicates that new STAs cannot associate with an VAP.
1.3.6.1.4.1.2011.6.139.13.1.1.74current
hwVapStaFullRecoverTrap
NOTIFICATION-TYPE
This object indicates that new STAs can associate with an VAP.
1.3.6.1.4.1.2011.6.139.13.1.1.75current
hwWlanBLELowPowerTrap
NOTIFICATION-TYPE
This object indicates that the battery power of a BLE device is lower than the specified low power alarm threshold.
1.3.6.1.4.1.2011.6.139.13.1.1.76current
hwWlanBLELowPowerRestoreTrap
NOTIFICATION-TYPE
This object indicates that the low power alarm of a BLE device has been cleared.
1.3.6.1.4.1.2011.6.139.13.1.1.77current
hwWlanBLEOfflineTrap
NOTIFICATION-TYPE
This object indicates that a BLE device gets offline.
1.3.6.1.4.1.2011.6.139.13.1.1.78current
hwWlanBLEOfflineRestoreTrap
NOTIFICATION-TYPE
This object indicates that an offline alarm of a BLE device has been cleared.
1.3.6.1.4.1.2011.6.139.13.1.1.79current
hwWlanBLEFaultyTrap
NOTIFICATION-TYPE
This object indicates that an AP's built-in Bluetooth module is faulty.
1.3.6.1.4.1.2011.6.139.13.1.1.80current
hwWlanBLEFaultyRestoreTrap
NOTIFICATION-TYPE
This object indicates that the fault on an AP's built-in Bluetooth module fault alarm is cleared.
1.3.6.1.4.1.2011.6.139.13.1.1.81current
hwAPIoTCardInsertTrap
NOTIFICATION-TYPE
This object indicates that an IoT card is inserted.
1.3.6.1.4.1.2011.6.139.13.1.1.82current
hwAPIoTCardRemoveTrap
NOTIFICATION-TYPE
This object indicates that an IoT card is removed.
1.3.6.1.4.1.2011.6.139.13.1.1.83current
hwAPIoTServerStartFailTrap
NOTIFICATION-TYPE
This object indicates that the server module on an AP for receiving data from the IoT card fails to start.
1.3.6.1.4.1.2011.6.139.13.1.1.84current
hwAPIoTServerStartFailResumeTrap
NOTIFICATION-TYPE
This object indicates that the server used by the IoT card is successfully recovered.
1.3.6.1.4.1.2011.6.139.13.1.1.85current
hwWlanApSubFirmwareMismatchTrap
NOTIFICATION-TYPE
This object indicates the mismatch alarm for the sub-firmware version on the AP.
1.3.6.1.4.1.2011.6.139.13.1.1.86current
hwApSpecificConfigChangedTrap
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.2011.6.139.13.1.1.87current
hwApConfigInconsistWithActualTrap
NOTIFICATION-TYPE
This alarm is generated when a the AP config is inconsistent with the actual attribute.
1.3.6.1.4.1.2011.6.139.13.1.1.88current
hwWlanBLEDetachedTrap
NOTIFICATION-TYPE
This object indicates an alarm showing that a Bluetooth tag is detached.
1.3.6.1.4.1.2011.6.139.13.1.1.89current
hwWlanBLEDetachedRestoreTrap
NOTIFICATION-TYPE
This object indicates an alarm showing that a Bluetooth tag is re-attached.
1.3.6.1.4.1.2011.6.139.13.1.1.90current
hwWlanCableSnrNormalTrap
NOTIFICATION-TYPE
This alarm is generated when the AP's current network cable quality is good.
1.3.6.1.4.1.2011.6.139.13.1.1.91current
hwWlanCableSnrAbnormalTrap
NOTIFICATION-TYPE
This alarm is generated when the AP's current network cable quality is poor, causing packet loss risks.
1.3.6.1.4.1.2011.6.139.13.1.1.92current
hwWlanCableSnrDetectNotSupportTrap
NOTIFICATION-TYPE
This alarm is generated when the AP's port is Down, resulting in a failure to detect the network cable quality.
1.3.6.1.4.1.2011.6.139.13.1.1.93current
hwApPowerInsufficientTrap
NOTIFICATION-TYPE
This alarm is generated when the AP power supply is insufficient.
1.3.6.1.4.1.2011.6.139.13.1.1.94current
hwApPowerInsufficientResumeTrap
NOTIFICATION-TYPE
This alarm is generated when the AP power supply insufficient resume.
1.3.6.1.4.1.2011.6.139.13.1.1.95current
hwPortVlanSecureMacTrap
NOTIFICATION-TYPE
This alarm is generated when the AP's port receive illegal MAC.
1.3.6.1.4.1.2011.6.139.13.1.1.96current
hwApMcBcPktNumExceedTrap
NOTIFICATION-TYPE
This alarm is generated when the AP broadcast and multicast packets over threshold.
1.3.6.1.4.1.2011.6.139.13.1.1.97current
hwApMcBcPktNumExceedRestoreTrap
NOTIFICATION-TYPE
This alarm is generated when the AP broadcast and multicast packets over threshold restore.
1.3.6.1.4.1.2011.6.139.13.1.1.98current
hwApTypeMismatchTrap
NOTIFICATION-TYPE
This object indicates that the AP version and the AC version do not match.
1.3.6.1.4.1.2011.6.139.13.1.1.99current
hwApSoftGreDownTrap
NOTIFICATION-TYPE
This alarm is generated when the softgre tunnel down.
1.3.6.1.4.1.2011.6.139.13.1.1.100current
hwApSoftGreDownTrapRestore
NOTIFICATION-TYPE
This alarm is generated when the softgre tunnel up.
1.3.6.1.4.1.2011.6.139.13.1.1.101current
hwApVersionNotRecommendedTrap
NOTIFICATION-TYPE
The AP version is not recommended for the current AC.
1.3.6.1.4.1.2011.6.139.13.1.1.102current
hwApVersionNotRecommendedTrapRestore
NOTIFICATION-TYPE
AP-version-not-recommended alarm restore
1.3.6.1.4.1.2011.6.139.13.1.1.103current
hwApDiskOverloadTrap
NOTIFICATION-TYPE
The Disk usage of an AP exceeds the upper threshold.
1.3.6.1.4.1.2011.6.139.13.1.1.104current
hwApDiskOverloadRestoreTrap
NOTIFICATION-TYPE
The Disk usage of an AP restores to the allowed range.
1.3.6.1.4.1.2011.6.139.13.1.1.105current
hwApPowerLimitedTrap
NOTIFICATION-TYPE
This alarm is generated when the AP works in Limited mode due to insufficient power supply.
1.3.6.1.4.1.2011.6.139.13.1.1.106current
hwApPowerLimitedResumeTrap
NOTIFICATION-TYPE
This alarm is generated when the AP resumes from the Limited mode.
1.3.6.1.4.1.2011.6.139.13.1.1.107current
hwAPIPConflictTrap
NOTIFICATION-TYPE
The IP address of the AP conflicts with that of the gateway or another AP.
1.3.6.1.4.1.2011.6.139.13.1.1.108current
hwApNumReachMaxTrap
NOTIFICATION-TYPE
This alarm is generated when the number of online APs reaches the maximum specifications.
1.3.6.1.4.1.2011.6.139.13.1.1.109current
hwApNumReachMaxResumeTrap
NOTIFICATION-TYPE
This alarm is generated when the number of online APs is less than the maximum specifications.
1.3.6.1.4.1.2011.6.139.13.1.1.110current
hwApNumReachWarningTrap
NOTIFICATION-TYPE
The number of online APs reaches 80% of the maximum specifications.
1.3.6.1.4.1.2011.6.139.13.1.1.111current
hwApNumReachWarningResumeTrap
NOTIFICATION-TYPE
The number of online APs is less than 80% of the maximum specifications.
1.3.6.1.4.1.2011.6.139.13.1.1.112current
hwAPIotCardConnectServerTrap
NOTIFICATION-TYPE
This alarm is generated when an IOT card of the AP is connected to the server.
1.3.6.1.4.1.2011.6.139.13.1.1.113current
hwAPIotCardDisconnectServerTrap
NOTIFICATION-TYPE
This alarm is generated when an IOT card of the AP is disconnected from the server.
1.3.6.1.4.1.2011.6.139.13.1.1.114current
hwAPIotCardTypeMatchTrap
NOTIFICATION-TYPE
This alarm is generated when an IOT card of the AP is match with configuration.
1.3.6.1.4.1.2011.6.139.13.1.1.115current
hwAPIotCardTypeMismatchTrap
NOTIFICATION-TYPE
This alarm is generated when an IOT card of the AP is mismatch with configuration.
1.3.6.1.4.1.2011.6.139.13.1.1.116current
hwAPFanRemoveTrap
NOTIFICATION-TYPE
This alarm is generated when the fan of the AP is removed.
1.3.6.1.4.1.2011.6.139.13.1.1.117current
hwAPFanInsertTrap
NOTIFICATION-TYPE
This alarm is generated when the fan of the AP is inserted.
1.3.6.1.4.1.2011.6.139.13.1.1.118current
hwAPPowerRemoveTrap
NOTIFICATION-TYPE
This alarm is generated when the power of the AP is removed.
1.3.6.1.4.1.2011.6.139.13.1.1.119current
hwAPPowerInsertTrap
NOTIFICATION-TYPE
This alarm is generated when the power of the AP is inserted.
1.3.6.1.4.1.2011.6.139.13.1.1.120current
hwAPPowerFailTrap
NOTIFICATION-TYPE
This alarm is generated when the power of the AP is faulty.
1.3.6.1.4.1.2011.6.139.13.1.1.121current
hwAPPowerFailResumeTrap
NOTIFICATION-TYPE
This alarm is generated when the power of the AP resume from failure.
1.3.6.1.4.1.2011.6.139.13.1.1.122current
hwAPPowerInvalidTrap
NOTIFICATION-TYPE
This alarm is generated when the AP power is invalid for some reason.
1.3.6.1.4.1.2011.6.139.13.1.1.123current
hwAPPowerInvalidResumeTrap
NOTIFICATION-TYPE
This alarm is generated when the AP power resume from invalid situation.
1.3.6.1.4.1.2011.6.139.13.1.1.124current
hwApExistNeedReconnectTrap
NOTIFICATION-TYPE
This alarm is generated when some APs need to be reconnected.
1.3.6.1.4.1.2011.6.139.13.1.1.125current
hwApExistNeedReconnectResumeTrap
NOTIFICATION-TYPE
This alarm is generated when no AP needs to be reconnected.
1.3.6.1.4.1.2011.6.139.13.1.1.126current
hwApOpticalVoltageTooHighTrap
NOTIFICATION-TYPE
This object indicates that the Voltage of an AP's optical module is too High.
1.3.6.1.4.1.2011.6.139.13.1.1.127current
hwApOpticalVoltageTooHighRestoreTrap
NOTIFICATION-TYPE
This object indicates that the Voltage of an AP's optical module restores to the normal range.
1.3.6.1.4.1.2011.6.139.13.1.1.128current
hwApOpticalVoltageTooLowTrap
NOTIFICATION-TYPE
This object indicates that the Voltage of an AP's optical module is too low.
1.3.6.1.4.1.2011.6.139.13.1.1.129current
hwApOpticalVoltageTooLowRestoreTrap
NOTIFICATION-TYPE
This object indicates that the Voltage of an AP's optical module restores to the normal range.
1.3.6.1.4.1.2011.6.139.13.1.1.130current
hwApOpticalCurrentTooHighTrap
NOTIFICATION-TYPE
This object indicates that the Current of an AP's optical module is too high.
1.3.6.1.4.1.2011.6.139.13.1.1.131current
hwApOpticalCurrentTooHighRestoreTrap
NOTIFICATION-TYPE
This object indicates that the Current of an AP's optical module restores to the normal range.
1.3.6.1.4.1.2011.6.139.13.1.1.132current
hwApOpticalCurrentTooLowTrap
NOTIFICATION-TYPE
This object indicates that Current of an AP's optical module is too low.
1.3.6.1.4.1.2011.6.139.13.1.1.133current
hwApOpticalCurrentTooLowRestoreTrap
NOTIFICATION-TYPE
This object indicates that the Current of an AP's optical module restores to the normal range.
1.3.6.1.4.1.2011.6.139.13.1.1.134current
hwApLoopbackDetectTrap
NOTIFICATION-TYPE
This object indicates that the wired port detected a loop and blocked itself.
1.3.6.1.4.1.2011.6.139.13.1.1.135current
hwApLoopbackDetectRestoreTrap
NOTIFICATION-TYPE
This object indicates that the blocked port has recovered.
1.3.6.1.4.1.2011.6.139.13.1.1.136current

Conformance

NameOIDStatus
hwWlanAPCompliance
MODULE-COMPLIANCE
Description.
1.3.6.1.4.1.2011.6.139.13.4.1.1current
hwWlanApTrapGroup
NOTIFICATION-GROUP
Description.
1.3.6.1.4.1.2011.6.139.13.4.2.1current
hwWlanApTrapObjectsGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.13.4.2.2current
hwWlanApTypeGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.13.4.2.3current
hwWlanApInfoGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.2011.6.139.13.4.2.4current