MIBs Depot

HUAWEI-CLOCK-MIB

Registered at
1.3.6.1.4.1.2011.5.25.186
Last updated
2017-07-12 00:00
Organization
Huawei Technologies Co.,Ltd.
Revisions
2017-07-12 00:00, 2017-05-23 00:00, 2017-01-20 00:00, 2016-08-27 00:00, 2016-07-21 00:00, 2016-02-04 00:00, 2015-12-17 00:00, 2015-12-01 00:00, 2015-11-17 00:00, 2015-10-22 00:00, 2015-10-20 00:00, 2015-10-16 00:00, 2015-10-09 00:00, 2015-09-18 00:00, 2015-09-16 00:00, 2014-11-29 00:00, 2014-11-03 00:00, 2014-08-13 00:00, 2014-04-21 00:00, 2014-01-07 00:00, 2013-11-12 00:00, 2013-10-31 00:00, 2013-05-23 00:00, 2013-05-14 00:00, 2013-03-20 00:00
Namespace
huawei
Source file
HUAWEI-CLOCK-MIB
Digest
sha256:d9bcc5ce78d959bc99f496645dd54db20ff03d2c21bac7bf03426d88738c9037

Description

Add hwClockGnssModelChange, hwClockPortName, hwClockGnssModel, hwClockOldGnssModel .

Contact

Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com

Imports

FromSymbols
ENTITY-MIBPhysicalIndex
HUAWEI-MIBhwDatacomm
IF-MIBInterfaceIndex
P-BRIDGE-MIBEnabledStatus
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
ENTITY-MIB
HUAWEI-CLOCK-MIB
HUAWEI-MIB
IANA-ENTITY-MIB
IANAifType-MIB
IF-MIB
P-BRIDGE-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
UUID-TC-MIB

Objects

NameOIDSyntaxAccessStatus
hwClockManageObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.186.1
hwClockGlobalObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.186.1.1
hwClockSourceEthClkEnable
OBJECT-TYPE
The flag indicates that the ethernet clock is globally enabled.
1.3.6.1.4.1.2011.5.25.186.1.1.1EnabledStatusread-writecurrent
hwClockSourceSsmUnknown
OBJECT-TYPE
The quality level of unknown SSM.
1.3.6.1.4.1.2011.5.25.186.1.1.2INTEGER {prc(2), ssua(4), ssub(8), sec(11), dnu(15)}read-writecurrent
hwClockSourceSysClkWorkMode
OBJECT-TYPE
The work mode of system clock.
1.3.6.1.4.1.2011.5.25.186.1.1.3INTEGER {trace(1), hold(2), freeoscillate(3)}read-onlycurrent
hwClockSourceForceCloseEnableStatus
OBJECT-TYPE
The enable status of export forced close.
1.3.6.1.4.1.2011.5.25.186.1.1.4EnabledStatusread-writecurrent
hwClockSourceSsmControl
OBJECT-TYPE
The flag whether SSM is concerned with the clock source selection.
1.3.6.1.4.1.2011.5.25.186.1.1.5INTEGER {on(1), off(2), extend(3)}read-writecurrent
hwClockSourceHoldMode
OBJECT-TYPE
The hold mode of clock source.
1.3.6.1.4.1.2011.5.25.186.1.1.6INTEGER {hold24Hours(1), holdForever(2)}read-onlycurrent
hwClockSourceFreqCheckEnable
OBJECT-TYPE
The enable flag of frequency check.
1.3.6.1.4.1.2011.5.25.186.1.1.7EnabledStatusread-writecurrent
hwClockSourceFreqCheckLeftRange
OBJECT-TYPE
The left range of frequency check, unit in 0.01ppm.
1.3.6.1.4.1.2011.5.25.186.1.1.8Integer32 (50..1000)read-writecurrent
hwClockSourceFreqCheckRightRange
OBJECT-TYPE
The right range of frequency check, unit in 0.01ppm.
1.3.6.1.4.1.2011.5.25.186.1.1.9Integer32 (50..1000)read-writecurrent
hwClockSourceRetrieveMode
OBJECT-TYPE
The retrieve mode of clock source.
1.3.6.1.4.1.2011.5.25.186.1.1.10INTEGER {retrieve(1), noRetrieve(2)}read-writecurrent
hwClockTimeUsedSource
OBJECT-TYPE
The clock time used source.
1.3.6.1.4.1.2011.5.25.186.1.1.11INTEGER {srcDclsTimeBit0(1), srcDclsTimeBit1(2), src1ppsTodBit0(3), src1ppsTodBit1(4), srcPtp(5), srcFreeRun(6)}read-writecurrent
hwClockExtTimeInputType
OBJECT-TYPE
The input time type of clock extern time.
1.3.6.1.4.1.2011.5.25.186.1.1.12INTEGER {typeDclsTime(1), type1ppsTodRs232(2), type1ppsTodGps(3), typeNone(4)}read-writecurrent
hwClockExtTimeOutputType
OBJECT-TYPE
The output time type of clock extern time.
1.3.6.1.4.1.2011.5.25.186.1.1.13INTEGER {typeDclsTime(1), type1ppsTodRs232(2), type1ppsTodGps(3), typeNone(4)}read-writecurrent
hwClockAlarmThresholdFrequencyOffset
OBJECT-TYPE
The Threshold of clock alarm.
1.3.6.1.4.1.2011.5.25.186.1.1.14Integer32 (10..92)read-writecurrent
hwClockFrequencyOffsetMax
OBJECT-TYPE
The max offset of clock frequency.
1.3.6.1.4.1.2011.5.25.186.1.1.15Integer32read-onlycurrent
hwClockFrequencyOffsetMin
OBJECT-TYPE
The min offset of clock frequency.
1.3.6.1.4.1.2011.5.25.186.1.1.16Integer32read-onlycurrent
hwClockFrequencyOffsetMean
OBJECT-TYPE
The mean offset of clock frequency.
1.3.6.1.4.1.2011.5.25.186.1.1.17Integer32read-onlycurrent
hwClockFrequencyOffset
OBJECT-TYPE
The current offset of clock frequency.
1.3.6.1.4.1.2011.5.25.186.1.1.18Integer32read-onlycurrent
hwClockBoardFreqSwitchEnable
OBJECT-TYPE
The enable flag of board frequency deviation swtich.
1.3.6.1.4.1.2011.5.25.186.1.1.19EnabledStatusread-writecurrent
hwClockSourceSelTable
OBJECT-TYPE
The system clock source selection table.
1.3.6.1.4.1.2011.5.25.186.1.2not-accessiblecurrent
hwClockSourceSelEntry
OBJECT-TYPE
The entry of system clock source selection table.
1.3.6.1.4.1.2011.5.25.186.1.2.1not-accessiblecurrent
hwClockSourceSelChassisIndex
OBJECT-TYPE
The chassis index.
1.3.6.1.4.1.2011.5.25.186.1.2.1.1PhysicalIndexnot-accessiblecurrent
hwClockSourceSelType
OBJECT-TYPE
The select type.
1.3.6.1.4.1.2011.5.25.186.1.2.1.2Integer32 (1..100)not-accessiblecurrent
hwClockSourceSelMode
OBJECT-TYPE
The mode of clock source selection.
1.3.6.1.4.1.2011.5.25.186.1.2.1.3INTEGER {auto(1), manual(2), force(3)}read-createcurrent
hwClockSourceSelSourceId
OBJECT-TYPE
The source ID of the clock traced.
1.3.6.1.4.1.2011.5.25.186.1.2.1.4Integer32read-createcurrent
hwClockSourceCfgTable
OBJECT-TYPE
The clock source config table.
1.3.6.1.4.1.2011.5.25.186.1.3not-accessiblecurrent
hwClockSourceCfgEntry
OBJECT-TYPE
The entry of clock source config table.
1.3.6.1.4.1.2011.5.25.186.1.3.1not-accessiblecurrent
hwClockCfgChassisIndex
OBJECT-TYPE
The index of the chassis whitch the clock source belongs to.
1.3.6.1.4.1.2011.5.25.186.1.3.1.1PhysicalIndexnot-accessiblecurrent
hwClockCfgSourceIndex
OBJECT-TYPE
The clock source index.
1.3.6.1.4.1.2011.5.25.186.1.3.1.2Integer32 (1..20)not-accessiblecurrent
hwClockCfgSourceId
OBJECT-TYPE
The clock source ID.
1.3.6.1.4.1.2011.5.25.186.1.3.1.3Integer32read-onlycurrent
hwClockCfgSourceDescr
OBJECT-TYPE
The clock source description.
1.3.6.1.4.1.2011.5.25.186.1.3.1.4OCTET STRINGread-onlycurrent
hwClockCfgWtrTime
OBJECT-TYPE
The waiting for restore time of clock source.
1.3.6.1.4.1.2011.5.25.186.1.3.1.5Integer32 (0..12)read-writecurrent
hwClockCfgBadDetect
OBJECT-TYPE
The enable status of clock source bad detecting.
1.3.6.1.4.1.2011.5.25.186.1.3.1.6EnabledStatusread-writecurrent
hwClockCfgSystemPriority
OBJECT-TYPE
The priority of system clock source.
1.3.6.1.4.1.2011.5.25.186.1.3.1.7Integer32 (-1..255)read-writecurrent
hwClockCfgBits0Priority
OBJECT-TYPE
The priority of BITS0 clock source.
1.3.6.1.4.1.2011.5.25.186.1.3.1.8Integer32 (-1..255)read-writecurrent
hwClockCfgBits1Priority
OBJECT-TYPE
The priority of BITS1 clock source.
1.3.6.1.4.1.2011.5.25.186.1.3.1.9Integer32 (-1..255)read-writecurrent
hwClockCfgSystemLockOut
OBJECT-TYPE
The lock out of system clock source.
1.3.6.1.4.1.2011.5.25.186.1.3.1.10Integer32read-writecurrent
hwClockCfgBits0LockOut
OBJECT-TYPE
The lock out of BITS0 clock source.
1.3.6.1.4.1.2011.5.25.186.1.3.1.11Integer32read-writecurrent
hwClockCfgBits1LockOut
OBJECT-TYPE
The lock out of BITS1 clock source.
1.3.6.1.4.1.2011.5.25.186.1.3.1.12Integer32read-writecurrent
hwClockCfgSourceSsm
OBJECT-TYPE
The SSM quality of clock source.
1.3.6.1.4.1.2011.5.25.186.1.3.1.13INTEGER {ssmPrc(1), ssmSsut(2), ssmSsul(3), ssmSec(4), ssmDnu(5), ssmUnknown(6)}read-writecurrent
hwClockCfgSourceSsmSetMode
OBJECT-TYPE
The set mode of SSM.
1.3.6.1.4.1.2011.5.25.186.1.3.1.14INTEGER {manual(1), auto(2)}read-writecurrent
hwClockCfgExportEnableStatus
OBJECT-TYPE
The enable status of clock source export.
1.3.6.1.4.1.2011.5.25.186.1.3.1.15EnabledStatusread-writecurrent
hwClockCfgSwiEnableStatus
OBJECT-TYPE
he enable status of clock source switch.
1.3.6.1.4.1.2011.5.25.186.1.3.1.16EnabledStatusread-writecurrent
hwClockCfgSourceState
OBJECT-TYPE
The state of clock source.
1.3.6.1.4.1.2011.5.25.186.1.3.1.17INTEGER {normal(1), abnormal(2)}read-writecurrent
hwClockCfgSsmThreshold
OBJECT-TYPE
The SSM quality level threshold of clock source.
1.3.6.1.4.1.2011.5.25.186.1.3.1.18INTEGER {qlDnu(1), qlSec(2), qlSsub(3), qlSsua(4), qlPrc(5)}read-writecurrent
hwClockCfgSourceS1Id
OBJECT-TYPE
The S1 byte of the clock.
1.3.6.1.4.1.2011.5.25.186.1.3.1.19Integer32 (0..255)read-onlycurrent
hwClockCfgFreqCheckResult
OBJECT-TYPE
The result of frequency check, unit in 0.01ppm.
1.3.6.1.4.1.2011.5.25.186.1.3.1.20Integer32read-writecurrent
hwClockCfgHoldOffTime
OBJECT-TYPE
The hold off time of clock, unit in 100ms.
1.3.6.1.4.1.2011.5.25.186.1.3.1.21Integer32 (3..18)read-writecurrent
hwClockCfgPriRvtEnableStatus
OBJECT-TYPE
The enable status of switch according priority.
1.3.6.1.4.1.2011.5.25.186.1.3.1.22EnabledStatusread-writecurrent
hwClockCfgSwitchCondition
OBJECT-TYPE
The condition of clock switch.
1.3.6.1.4.1.2011.5.25.186.1.3.1.23INTEGER {noSwitch(1), switch(2)}read-writecurrent
hwClockCfgClkSourceType
OBJECT-TYPE
The type of clock source.
1.3.6.1.4.1.2011.5.25.186.1.3.1.24INTEGER {bits(1), line(2), inner(3), system(4)}read-onlycurrent
hwClockBitsCfgTable
OBJECT-TYPE
The clock bits congfig table.
1.3.6.1.4.1.2011.5.25.186.1.4not-accessiblecurrent
hwClockBitsCfgEntry
OBJECT-TYPE
The entry of clock bits congfig table.
1.3.6.1.4.1.2011.5.25.186.1.4.1not-accessiblecurrent
hwClockBitsCfgChassisIndex
OBJECT-TYPE
The index of the chassis whitch the clock source belongs to.
1.3.6.1.4.1.2011.5.25.186.1.4.1.1PhysicalIndexnot-accessiblecurrent
hwClockBitsCfgBitsIndex
OBJECT-TYPE
The index of BITS clock.
1.3.6.1.4.1.2011.5.25.186.1.4.1.2Integer32 (1..10)not-accessiblecurrent
hwClockBitsCfgName
OBJECT-TYPE
The name of clock.
1.3.6.1.4.1.2011.5.25.186.1.4.1.3OCTET STRINGread-onlycurrent
hwClockBitsCfgBitsPortType
OBJECT-TYPE
The BITS port type.
1.3.6.1.4.1.2011.5.25.186.1.4.1.4INTEGER {portRj45(1), portSMB(2)}read-onlycurrent
hwClockBitsCfgBitsType
OBJECT-TYPE
The BITS type.
1.3.6.1.4.1.2011.5.25.186.1.4.1.5INTEGER {type2Mbps(0), type2Mhz(1), typeDclsTime(2), type1ppsTod(3), none(4), type1544Mbps(5)}read-writecurrent
hwClockBitsCfgDirection
OBJECT-TYPE
The direction of BITS.
1.3.6.1.4.1.2011.5.25.186.1.4.1.6INTEGER {in(1), out(2), inAndOut(3), none(4)}read-writecurrent
hwClockBitsCfgRecvSaBit
OBJECT-TYPE
The received SA bit.
1.3.6.1.4.1.2011.5.25.186.1.4.1.7INTEGER {sa4(4), sa5(5), sa6(6), sa7(7), sa8(8)}read-writecurrent
hwClockBitsCfgSendSaBit
OBJECT-TYPE
The sent SA bit.
1.3.6.1.4.1.2011.5.25.186.1.4.1.8INTEGER {sa4(4), sa5(5), sa6(6), sa7(7), sa8(8)}read-writecurrent
hwClockBitsCfgForceOutS1
OBJECT-TYPE
The S1 byte of forcing out.
1.3.6.1.4.1.2011.5.25.186.1.4.1.9INTEGER {unk(0), prc(2), ssua(4), ssub(8), sec(11), dnu(15)}read-writecurrent
hwClockBitsCfgSaBit
OBJECT-TYPE
The SA bit of SSM information.
1.3.6.1.4.1.2011.5.25.186.1.4.1.10INTEGER {sa4(4), sa5(5), sa6(6), sa7(7), sa8(8)}read-writecurrent
hwClockBitsCfgInputMode
OBJECT-TYPE
The input mode of clock source.
1.3.6.1.4.1.2011.5.25.186.1.4.1.11INTEGER {clk2MBits(0), clk2MHz(1), dclsTime(2)}read-writecurrent
hwClockBitsCfgOutputMode
OBJECT-TYPE
The output mode of clock source.
1.3.6.1.4.1.2011.5.25.186.1.4.1.12INTEGER {clk2MBits(0), clk2MHz(1), dclsTime(2)}read-writecurrent
hwClockBitsCfgInvalidCond
OBJECT-TYPE
The invalid condition of clock source.
1.3.6.1.4.1.2011.5.25.186.1.4.1.13INTEGER {no(1), ais(2), lof(3)}read-writecurrent
hwClockBitsCfgSourceId
OBJECT-TYPE
The clock source ID.
1.3.6.1.4.1.2011.5.25.186.1.4.1.14Integer32read-onlycurrent
hwClockBitsCfgTodSignal
OBJECT-TYPE
The tod signal of clock source.
1.3.6.1.4.1.2011.5.25.186.1.4.1.15INTEGER {nmea(1), ubx(2), none(3)}read-writecurrent
hwClockBitsCfgFrameFormat
OBJECT-TYPE
Encoding type and frame check format of the extern clock port.
1.3.6.1.4.1.2011.5.25.186.1.4.1.16INTEGER {none(0), pcm30nocrc(1), pcm30crc(2), pcm31nocrc(3), pcm31crc(4)}read-writecurrent
hwClockPortCfgTable
OBJECT-TYPE
The clock port config table.
1.3.6.1.4.1.2011.5.25.186.1.5not-accessiblecurrent
hwClockPortCfgEntry
OBJECT-TYPE
The entry of clock port config table.
1.3.6.1.4.1.2011.5.25.186.1.5.1not-accessiblecurrent
hwClockPortCfgIfIndex
OBJECT-TYPE
The interface index.
1.3.6.1.4.1.2011.5.25.186.1.5.1.1InterfaceIndexnot-accessiblecurrent
hwClockPortCfgLeftFramePri
OBJECT-TYPE
The clock priority of left frame.
1.3.6.1.4.1.2011.5.25.186.1.5.1.2Integer32 (0..255)read-writecurrent
hwClockPortCfgRightFramePri
OBJECT-TYPE
The clock priority of right frame.
1.3.6.1.4.1.2011.5.25.186.1.5.1.3Integer32 (0..255)read-writecurrent
hwClockPortCfgForceOutS1
OBJECT-TYPE
The S1 byte of forcing out.
1.3.6.1.4.1.2011.5.25.186.1.5.1.4Integer32 (-1..255)read-writecurrent
hwClockLineClkCfgTable
OBJECT-TYPE
The line clock config table.
1.3.6.1.4.1.2011.5.25.186.1.6not-accessiblecurrent
hwClockLineClkCfgEntry
OBJECT-TYPE
The entry of line clock config table.
1.3.6.1.4.1.2011.5.25.186.1.6.1not-accessiblecurrent
hwClockLineClkCfgChassisIndex
OBJECT-TYPE
The chassis index.
1.3.6.1.4.1.2011.5.25.186.1.6.1.1PhysicalIndexnot-accessiblecurrent
hwClockLineClkCfgSlotIndex
OBJECT-TYPE
The slot index of the line clock.
1.3.6.1.4.1.2011.5.25.186.1.6.1.2Integer32 (1..200)not-accessiblecurrent
hwClockLineClkCfgCardId
OBJECT-TYPE
The card index witch is seleced to provide line clock.
1.3.6.1.4.1.2011.5.25.186.1.6.1.3Integer32read-createcurrent
hwClockLineClkCfgPortId
OBJECT-TYPE
The port index witch is seleced to provide line clock.
1.3.6.1.4.1.2011.5.25.186.1.6.1.4Integer32read-createcurrent
hwClockLineClkCfgRecvS1
OBJECT-TYPE
The S1 byte value received.
1.3.6.1.4.1.2011.5.25.186.1.6.1.5Integer32read-onlycurrent
hwClockLineClkCfgSendS1
OBJECT-TYPE
The S1 byte value sent.
1.3.6.1.4.1.2011.5.25.186.1.6.1.6Integer32read-createcurrent
hwClockLineCfgSoureId
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.5.25.186.1.6.1.7Integer32read-createcurrent
hwClockTrapOid
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.186.1.7
hwClockLastSourceName
OBJECT-TYPE
The last clock source name.
1.3.6.1.4.1.2011.5.25.186.1.7.1OCTET STRINGaccessible-for-notifycurrent
hwClockCurSourceName
OBJECT-TYPE
The current clock source name.
1.3.6.1.4.1.2011.5.25.186.1.7.2OCTET STRINGaccessible-for-notifycurrent
hwClockSourceOldLockMode
OBJECT-TYPE
The old lock mode of clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.3INTEGER {freeRun(0), fastLock(1), lock(2), hold(3), freeRunJudge(16), holdJudge(19)}accessible-for-notifycurrent
hwClockChassisId
OBJECT-TYPE
The chassis ID.
1.3.6.1.4.1.2011.5.25.186.1.7.4Integer32accessible-for-notifycurrent
hwClockOldSourceState
OBJECT-TYPE
The old state of clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.5INTEGER {initial(0), normal(1), abnormal(2), wtr(3), holdoff(4)}accessible-for-notifycurrent
hwClockPllId
OBJECT-TYPE
The id of pll.
1.3.6.1.4.1.2011.5.25.186.1.7.6INTEGER {system(1), sync2M1(2), sync2M2(3)}accessible-for-notifycurrent
hwClockAttributeOutValue
OBJECT-TYPE
The current output value.
1.3.6.1.4.1.2011.5.25.186.1.7.7INTEGER {unk(0), prc(2), ssua(4), ssub(8), sec(11), dnu(15)}accessible-for-notifycurrent
hwClockCesAcrSlot
OBJECT-TYPE
The slot ID of CES ACR clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.8Integer32accessible-for-notifycurrent
hwClockCesAcrCard
OBJECT-TYPE
The card ID of CES ACR clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.9Integer32accessible-for-notifycurrent
hwClockCesAcrDomain
OBJECT-TYPE
The recovery domain value of CES ACR clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.10Integer32accessible-for-notifycurrent
hwClockCesAcrOldMasterPwName
OBJECT-TYPE
The master pw SerialPort name of CES ACR old clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.11OCTET STRINGaccessible-for-notifycurrent
hwClockCesAcrNewMasterPwName
OBJECT-TYPE
The master pw SerialPort name of CES ACR new clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.12OCTET STRINGaccessible-for-notifycurrent
hwClockCesAcrLockState
OBJECT-TYPE
The lock state of the CES ACR.
1.3.6.1.4.1.2011.5.25.186.1.7.13Integer32accessible-for-notifycurrent
hwClockCesDcrSlot
OBJECT-TYPE
The slot ID of CES DCR clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.14Integer32accessible-for-notifycurrent
hwClockCesDcrCard
OBJECT-TYPE
The card ID of CES DCR clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.15Integer32accessible-for-notifycurrent
hwClockCesDcrDomain
OBJECT-TYPE
The recovery domain value of CES DCR clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.16Integer32accessible-for-notifycurrent
hwClockCesDcrOldMasterPwName
OBJECT-TYPE
The master pw SerialPort name of CES DCR old clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.17OCTET STRINGaccessible-for-notifycurrent
hwClockCesDcrNewMasterPwName
OBJECT-TYPE
The master pw SerialPort name of CES DCR new clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.18OCTET STRINGaccessible-for-notifycurrent
hwClockCesDcrLockState
OBJECT-TYPE
The lock state of the CES DCR.
1.3.6.1.4.1.2011.5.25.186.1.7.19Integer32accessible-for-notifycurrent
hwClockOldSourceSsm
OBJECT-TYPE
The old SSM quality of clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.20INTEGER {ssmUnk(0), ssmPrc(2), ssmSsua(4), ssmSsub(8), ssmSec(11), ssmDnu(15), ssmInvalid(255)}accessible-for-notifycurrent
hwClockNewSourceSsm
OBJECT-TYPE
The new SSM quality of clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.21INTEGER {ssmUnk(0), ssmPrc(2), ssmSsua(4), ssmSsub(8), ssmSec(11), ssmDnu(15), ssmInvalid(255)}accessible-for-notifycurrent
hwClockClusterNewSyncType
OBJECT-TYPE
The type of clock inter-chassis sync.
1.3.6.1.4.1.2011.5.25.186.1.7.22INTEGER {frequency(1), time(2)}accessible-for-notifycurrent
hwClockClusterNewTopoType
OBJECT-TYPE
The type of clock inter-chassis topo.
1.3.6.1.4.1.2011.5.25.186.1.7.23INTEGER {interlink(1), externInject(2)}accessible-for-notifycurrent
hwClockClusterNewTopoLinkType
OBJECT-TYPE
The type of clock inter-chassis link.
1.3.6.1.4.1.2011.5.25.186.1.7.24INTEGER {bits(1), port(2)}accessible-for-notifycurrent
hwClockClusterNewTopoStatus
OBJECT-TYPE
The status of clock inter-chassis topo.
1.3.6.1.4.1.2011.5.25.186.1.7.25INTEGER {fail(1), success(2)}accessible-for-notifycurrent
hwClockPortIfIndex
OBJECT-TYPE
Port index.
1.3.6.1.4.1.2011.5.25.186.1.7.26Integer32accessible-for-notifycurrent
hwClockPortName
OBJECT-TYPE
The port name.
1.3.6.1.4.1.2011.5.25.186.1.7.27OCTET STRINGaccessible-for-notifycurrent
hwClockGnssModel
OBJECT-TYPE
The gnss model.
1.3.6.1.4.1.2011.5.25.186.1.7.28INTEGER {gps(1), glonass(2), beidou(3), gpsglonass(4), gpsbeidou(5)}accessible-for-notifycurrent
hwClockOldGnssModel
OBJECT-TYPE
The old gnss model.
1.3.6.1.4.1.2011.5.25.186.1.7.29INTEGER {gps(1), glonass(2), beidou(3), gpsglonass(4), gpsbeidou(5)}accessible-for-notifycurrent
hwClockNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.186.1.8
hwClockAttributeTable
OBJECT-TYPE
The clock Attribute table.
1.3.6.1.4.1.2011.5.25.186.1.9not-accessiblecurrent
hwClockAttributeEntry
OBJECT-TYPE
The entry of clock Attribute table.
1.3.6.1.4.1.2011.5.25.186.1.9.1not-accessiblecurrent
hwClockAttributeChassisIndex
OBJECT-TYPE
The chassis index.
1.3.6.1.4.1.2011.5.25.186.1.9.1.1PhysicalIndexnot-accessiblecurrent
hwClockAttributeSysClkRunMode
OBJECT-TYPE
The run mode of system clock.
1.3.6.1.4.1.2011.5.25.186.1.9.1.2INTEGER {normal(0), freeRun(1), hold(2)}read-writecurrent
hwClockAttributeSsmControl
OBJECT-TYPE
The flag whether SSM is concerned with the clock source selection.
1.3.6.1.4.1.2011.5.25.186.1.9.1.3INTEGER {on(0), off(1)}read-writecurrent
hwClockAttributeFreqCheckEnable
OBJECT-TYPE
The enable flag of frequency check.
1.3.6.1.4.1.2011.5.25.186.1.9.1.4EnabledStatusread-writecurrent
hwClockAttributeRetrieveMode
OBJECT-TYPE
The retrieve mode of system clock.
1.3.6.1.4.1.2011.5.25.186.1.9.1.5INTEGER {retrieve(0), noRetrieve(1)}read-writecurrent
hwClockAttributeWtrTime
OBJECT-TYPE
The time waiting for retrieve.
1.3.6.1.4.1.2011.5.25.186.1.9.1.6Integer32 (0..12)read-writecurrent
hwClockAttributeHoldOffTime
OBJECT-TYPE
The holdoff-time when the system source is lost.
1.3.6.1.4.1.2011.5.25.186.1.9.1.7Integer32 (300..1800)read-writecurrent
hwClockAttributeOutThreshold
OBJECT-TYPE
The Threshold of out put.
1.3.6.1.4.1.2011.5.25.186.1.9.1.8INTEGER {prc(2), ssua(4), ssub(8), sec(11), dnu(15)}read-writecurrent
hwClockAttributeSysMaxOutSsm
OBJECT-TYPE
The max ssm of system out put.
1.3.6.1.4.1.2011.5.25.186.1.9.1.9INTEGER {unk(0), prc(2), ssua(4), ssub(8), sec(11)}read-writecurrent
hwClockAttribute2M1MaxOutSsm
OBJECT-TYPE
The max ssm of 2msync-1 out put.
1.3.6.1.4.1.2011.5.25.186.1.9.1.10INTEGER {unk(0), prc(2), ssua(4), ssub(8), sec(11)}read-writecurrent
hwClockAttribute2M2MaxOutSsm
OBJECT-TYPE
The max ssm of 2msync-2 out put.
1.3.6.1.4.1.2011.5.25.186.1.9.1.11INTEGER {unk(0), prc(2), ssua(4), ssub(8), sec(11)}read-writecurrent
hwClockAttributeSysClkLockMode
OBJECT-TYPE
The Lock mode of system clock.
1.3.6.1.4.1.2011.5.25.186.1.9.1.12INTEGER {freeRun(0), fastLock(1), lock(2), hold(3), freeRunJudge(16), holdJudge(19)}read-onlycurrent
hwClockAttributeExtendSsmControl
OBJECT-TYPE
The flag whether Extend SSM is concerned with the clock source selection.
1.3.6.1.4.1.2011.5.25.186.1.9.1.13INTEGER {on(0), off(1)}read-writecurrent
hwClockAttributeInternalClockId
OBJECT-TYPE
The internal clockid of the device.
1.3.6.1.4.1.2011.5.25.186.1.9.1.14Integer32 (0..15)read-writecurrent
hwClockAttributeTodProtocol
OBJECT-TYPE
1pps bits tod protocol.
1.3.6.1.4.1.2011.5.25.186.1.9.1.15INTEGER {nmea(1), ubx(2), none(3), ccsa(4)}read-writecurrent
hwClockAttributeLtiSquelch
OBJECT-TYPE
The frequency signal output squelch flag upon the frequency loss.
1.3.6.1.4.1.2011.5.25.186.1.9.1.16EnabledStatusread-writecurrent
hwClockAttributeInputThreshold
OBJECT-TYPE
The squelch threshold of the external input source.
1.3.6.1.4.1.2011.5.25.186.1.9.1.17INTEGER {prc(2), ssua(4), ssub(8), sec(11), dnu(15)}read-writecurrent
hwClockSrcSelTable
OBJECT-TYPE
The system clock source selection table.
1.3.6.1.4.1.2011.5.25.186.1.10not-accessiblecurrent
hwClockSrcSelEntry
OBJECT-TYPE
The entry of system clock source selection table.
1.3.6.1.4.1.2011.5.25.186.1.10.1not-accessiblecurrent
hwClockSrcSelChassisIndex
OBJECT-TYPE
The chassis index.
1.3.6.1.4.1.2011.5.25.186.1.10.1.1PhysicalIndexnot-accessiblecurrent
hwClockSrcSelType
OBJECT-TYPE
The PLL Id.
1.3.6.1.4.1.2011.5.25.186.1.10.1.2INTEGER {system(1), sync2M1(2), sync2M2(3)}not-accessiblecurrent
hwClockSrcSelMode
OBJECT-TYPE
The mode of clock source selection.
1.3.6.1.4.1.2011.5.25.186.1.10.1.3INTEGER {auto(0), manual(1), force(2)}read-writecurrent
hwClockSrcSelSrcName
OBJECT-TYPE
The name of clock source for selection.
1.3.6.1.4.1.2011.5.25.186.1.10.1.4OCTET STRINGread-writecurrent
hwClockSrcTraceSrcName
OBJECT-TYPE
The name of trace source.
1.3.6.1.4.1.2011.5.25.186.1.10.1.5OCTET STRINGread-onlycurrent
hwClockSrcCfgTable
OBJECT-TYPE
The clock source config table.
1.3.6.1.4.1.2011.5.25.186.1.11not-accessiblecurrent
hwClockSrcCfgEntry
OBJECT-TYPE
The entry of clock source config table.
1.3.6.1.4.1.2011.5.25.186.1.11.1not-accessiblecurrent
hwClockSrcCfgChassisIndex
OBJECT-TYPE
The chassis index.
1.3.6.1.4.1.2011.5.25.186.1.11.1.1PhysicalIndexnot-accessiblecurrent
hwClockSrcCfgSourceTypeIndex
OBJECT-TYPE
The type of clock source.
1.3.6.1.4.1.2011.5.25.186.1.11.1.2INTEGER {bits(1), ptp(2), interface(3), cesacr(4)}accessible-for-notifycurrent
hwClockSrcCfgSourceIndex
OBJECT-TYPE
The index of clock source.
1.3.6.1.4.1.2011.5.25.186.1.11.1.3Integer32not-accessiblecurrent
hwClockSrcCfgSourceDescr
OBJECT-TYPE
The description of clock source.
1.3.6.1.4.1.2011.5.25.186.1.11.1.4OCTET STRINGread-onlycurrent
hwClockSrcCfgClkEnable
OBJECT-TYPE
The enable flag of clock source.
1.3.6.1.4.1.2011.5.25.186.1.11.1.5EnabledStatusread-createcurrent
hwClockSrcCfgSystemPriority
OBJECT-TYPE
The priority of system clock source.
1.3.6.1.4.1.2011.5.25.186.1.11.1.6Integer32 (0..255)read-createcurrent
hwClockSrcCfg2M1Priority
OBJECT-TYPE
The priority of 2msync-1 clock source.
1.3.6.1.4.1.2011.5.25.186.1.11.1.7Integer32 (0..255)read-createcurrent
hwClockSrcCfg2M2Priority
OBJECT-TYPE
The priority of 2msync-2 clock source.
1.3.6.1.4.1.2011.5.25.186.1.11.1.8Integer32 (0..255)read-createcurrent
hwClockSrcCfgSourceSsm
OBJECT-TYPE
The SSM quality of clock source.
1.3.6.1.4.1.2011.5.25.186.1.11.1.9INTEGER {unk(0), prc(2), ssua(4), ssub(8), sec(11), dnu(15), unknown(16)}read-createcurrent
hwClockSrcCfgSsmSetMode
OBJECT-TYPE
The set mode of SSM.
1.3.6.1.4.1.2011.5.25.186.1.11.1.10INTEGER {manual(1), auto(2)}read-onlycurrent
hwClockSrcCfgSourceState
OBJECT-TYPE
The state of clock source.
1.3.6.1.4.1.2011.5.25.186.1.11.1.11INTEGER {initial(0), normal(1), abnormal(2), waitwtr(3), holdoff(4)}read-onlycurrent
hwClockSrcCfgFreqCheckResult
OBJECT-TYPE
The result of frequency check.
1.3.6.1.4.1.2011.5.25.186.1.11.1.12INTEGER {abnormal(0), normal(1)}read-onlycurrent
hwClockSrcCfgSsmInterval
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.5.25.186.1.11.1.13Integer32 (512..8000)read-createcurrent
hwClockSrcCfgSsmTimeout
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.5.25.186.1.11.1.14Integer32 (2000..32000)read-createcurrent
hwClockSrcCfgSabit
OBJECT-TYPE
The SA bit of E1 Port SSM information.
1.3.6.1.4.1.2011.5.25.186.1.11.1.15INTEGER {sa4(4), sa5(5), sa6(6), sa7(7), sa8(8), invalid(99)}read-writecurrent
hwClockSrcCfgClockId
OBJECT-TYPE
The clockid of clock source.
1.3.6.1.4.1.2011.5.25.186.1.11.1.16Integer32 (0..15)read-writecurrent
hwClockSrcCfgClockIdSetMode
OBJECT-TYPE
The set mode of clockid.
1.3.6.1.4.1.2011.5.25.186.1.11.1.17INTEGER {manual(1), auto(2)}read-onlycurrent
hwClockSrcCfgOutSsm
OBJECT-TYPE
Current output ssm.
1.3.6.1.4.1.2011.5.25.186.1.11.1.18INTEGER {unk(0), prc(2), ssua(4), ssub(8), sec(11), dnu(15), unknown(16), invalid(99)}read-onlycurrent
hwClockSrcCfgOutClockId
OBJECT-TYPE
Current output clockid.
1.3.6.1.4.1.2011.5.25.186.1.11.1.19INTEGER {clockid0(0), clockid1(1), clockid2(2), clockid3(3), clockid4(4), clockid5(5), clockid6(6), clockid7(7), clockid8(8), clockid9(9), clockid10(10), clockid11(11), clockid12(12), clockid13(13), clockid14(14), clockid15(15), notsupport(99)}read-onlycurrent
hwClockSrcCfgRowStatus
OBJECT-TYPE
The row status.
1.3.6.1.4.1.2011.5.25.186.1.11.1.20RowStatusread-createcurrent
hwClockSrcCfgFreqDeviation
OBJECT-TYPE
Freqdeviation value of clock source.
1.3.6.1.4.1.2011.5.25.186.1.11.1.21OCTET STRINGread-onlycurrent
hwClockSrcCfgPhyState
OBJECT-TYPE
The PHY clock state of ports.
1.3.6.1.4.1.2011.5.25.186.1.11.1.22INTEGER {cardTypeNotSupport(0), slave(1), master(2), speedNotSupport(3), portDown(4)}read-onlycurrent
hwClockSrcCfgNegotiationSlave
OBJECT-TYPE
Set PHY clock state to slave.
1.3.6.1.4.1.2011.5.25.186.1.11.1.23INTEGER {notSupport(0), enable(1), disable(2)}read-createcurrent
hwClockSrcCfgFreqDeviationRecover
OBJECT-TYPE
The recovery of clock source freq-deviation state.
1.3.6.1.4.1.2011.5.25.186.1.11.1.24INTEGER {recover(1)}read-createcurrent
hwClockCesAcrPortCfgTable
OBJECT-TYPE
The CES ACR clock port config table.
1.3.6.1.4.1.2011.5.25.186.1.12not-accessiblecurrent
hwClockCesAcrPortCfgEntry
OBJECT-TYPE
The entry of CES ACR clock port config table.
1.3.6.1.4.1.2011.5.25.186.1.12.1not-accessiblecurrent
hwClockCesAcrParentIfIndex
OBJECT-TYPE
Indicates the index of the parent interface.
1.3.6.1.4.1.2011.5.25.186.1.12.1.1InterfaceIndexnot-accessiblecurrent
hwClockCesAcrChannelId
OBJECT-TYPE
Indicates the channel ID.
1.3.6.1.4.1.2011.5.25.186.1.12.1.2Integer32not-accessiblecurrent
hwClockCesAcrIfIndex
OBJECT-TYPE
Indicates the interface index.
1.3.6.1.4.1.2011.5.25.186.1.12.1.3InterfaceIndexnot-accessiblecurrent
hwClockCesAcrPortName
OBJECT-TYPE
Port name.
1.3.6.1.4.1.2011.5.25.186.1.12.1.4OCTET STRINGread-onlycurrent
hwClockCesAcrChannelType
OBJECT-TYPE
Indicates the interface type. The type can be E1/CE1 or T1/CT1.
1.3.6.1.4.1.2011.5.25.186.1.12.1.5INTEGER {t1(1), e1(2)}read-createcurrent
hwClockCesAcrSourceMode
OBJECT-TYPE
Indicates the clock mode of the interface. master: indicates that the clock works in master mode and uses the internal clock signal. slave: indicates that the clock works in slave mode and uses the line clock signal. recovery-domain: indicates that the clock works in slave mode and uses the recovery domain clock signal.
1.3.6.1.4.1.2011.5.25.186.1.12.1.6INTEGER {master(1), slave(2), recoveryDomain(3)}read-createcurrent
hwClockCesAcrRecoveryDomain
OBJECT-TYPE
Indicates the clock recovery domain of the interface. DEFVAL is 0.
1.3.6.1.4.1.2011.5.25.186.1.12.1.7Integer32 (0..16)read-createcurrent
hwClockCesAcrPwDomain
OBJECT-TYPE
Indicates the clock PW domain of the interface. DEFVAL is 0.
1.3.6.1.4.1.2011.5.25.186.1.12.1.8Integer32 (0..8)read-createcurrent
hwClockCesAcrPortCfgRowStatus
OBJECT-TYPE
The row status.
1.3.6.1.4.1.2011.5.25.186.1.12.1.9RowStatusread-createcurrent
hwClockCesAcrMasterDomain
OBJECT-TYPE
Indicates the clock master domain of the interface. DEFVAL is 0.
1.3.6.1.4.1.2011.5.25.186.1.12.1.10Integer32 (0..32)read-createcurrent
hwClockCesMode
OBJECT-TYPE
Indicates the clock CES recovery mode of the interface. DEFVAL is 0.
1.3.6.1.4.1.2011.5.25.186.1.12.1.11INTEGER {acr(1), dcr(2)}read-createcurrent
hwClockCesAcrCfgTable
OBJECT-TYPE
The CES ACR clock source config table.
1.3.6.1.4.1.2011.5.25.186.1.13not-accessiblecurrent
hwClockCesAcrCfgEntry
OBJECT-TYPE
The entry of CES ACR clock source config table.
1.3.6.1.4.1.2011.5.25.186.1.13.1not-accessiblecurrent
hwClockCesAcrCfgSlot
OBJECT-TYPE
The slot ID of CES ACR clock source.
1.3.6.1.4.1.2011.5.25.186.1.13.1.1Integer32not-accessiblecurrent
hwClockCesAcrCfgCard
OBJECT-TYPE
The card ID of CES ACR clock source.
1.3.6.1.4.1.2011.5.25.186.1.13.1.2Integer32not-accessiblecurrent
hwClockCesAcrCfgDomain
OBJECT-TYPE
The recovery domain value of CES ACR clock source.
1.3.6.1.4.1.2011.5.25.186.1.13.1.3Integer32 (1..8)not-accessiblecurrent
hwClockCesAcrCfgDescr
OBJECT-TYPE
The description of clock source.
1.3.6.1.4.1.2011.5.25.186.1.13.1.4OCTET STRINGread-onlycurrent
hwClockCesAcrCfgSyncEnable
OBJECT-TYPE
The enable flag of CES ACR clock source.
1.3.6.1.4.1.2011.5.25.186.1.13.1.5EnabledStatusread-createcurrent
hwClockCesAcrCfgSystemPriority
OBJECT-TYPE
The priority of system CES ACR clock source. DEFVAL is 0.
1.3.6.1.4.1.2011.5.25.186.1.13.1.6Integer32 (0..255)read-createcurrent
hwClockCesAcrCfgSsm
OBJECT-TYPE
The SSM quality of CES ACR clock source.
1.3.6.1.4.1.2011.5.25.186.1.13.1.7INTEGER {unk(0), prc(2), ssua(4), ssub(8), sec(11), dnu(15), unknown(16)}read-createcurrent
hwClockCesAcrCfgClockId
OBJECT-TYPE
The clockid of clock source. DEFVAL is 0.
1.3.6.1.4.1.2011.5.25.186.1.13.1.8Integer32 (0..15)read-createcurrent
hwClockCesAcrCfgSourceState
OBJECT-TYPE
The state of CES ACR clock source.
1.3.6.1.4.1.2011.5.25.186.1.13.1.9INTEGER {initial(0), normal(1), abnormal(2), waitwtr(3), holdoff(4)}read-onlycurrent
hwClockCesAcrCfgFreqCheckResult
OBJECT-TYPE
The result of CES ACR clock source frequency check.
1.3.6.1.4.1.2011.5.25.186.1.13.1.10INTEGER {abnormal(0), normal(1)}read-onlycurrent
hwClockCesAcrCfgRowStatus
OBJECT-TYPE
The row status.
1.3.6.1.4.1.2011.5.25.186.1.13.1.11RowStatusread-createcurrent
hwClockCesAcrDomainInfoTable
OBJECT-TYPE
The CES ACR domain infomation table.
1.3.6.1.4.1.2011.5.25.186.1.14not-accessiblecurrent
hwClockCesAcrDomainInfoEntry
OBJECT-TYPE
The entry of CES ACR domain infomation table.
1.3.6.1.4.1.2011.5.25.186.1.14.1not-accessiblecurrent
hwClockCesAcrDomianInfoSlot
OBJECT-TYPE
The slot ID of CES ACR clock source.
1.3.6.1.4.1.2011.5.25.186.1.14.1.1Integer32not-accessiblecurrent
hwClockCesAcrDomianInfoCard
OBJECT-TYPE
The card ID of CES ACR clock source.
1.3.6.1.4.1.2011.5.25.186.1.14.1.2Integer32not-accessiblecurrent
hwClockCesAcrDomianInfoDomain
OBJECT-TYPE
The recovery domain value of CES ACR clock source.
1.3.6.1.4.1.2011.5.25.186.1.14.1.3Integer32 (1..16)not-accessiblecurrent
hwClockCesAcrDomianInfoMasterPwName
OBJECT-TYPE
Port name.
1.3.6.1.4.1.2011.5.25.186.1.14.1.4OCTET STRINGread-onlycurrent
hwClockCesAcrDomianInfoChannelId
OBJECT-TYPE
Indicates the channel ID.
1.3.6.1.4.1.2011.5.25.186.1.14.1.5Integer32read-onlycurrent
hwClockCesAcrDomianInfoState
OBJECT-TYPE
The state of CES ACR clock source.
1.3.6.1.4.1.2011.5.25.186.1.14.1.6INTEGER {none(1), wait(2), lock(3)}read-onlycurrent
hwClockClusterTopoTable
OBJECT-TYPE
The CES ACR domain infomation table.
1.3.6.1.4.1.2011.5.25.186.1.15not-accessiblecurrent
hwClockClusterTopoEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.2011.5.25.186.1.15.1not-accessiblecurrent
hwClockClusterSyncType
OBJECT-TYPE
The type of clock inter-chassis sync.
1.3.6.1.4.1.2011.5.25.186.1.15.1.1INTEGER {frequency(1), time(2)}read-onlycurrent
hwClockClusterTopoType
OBJECT-TYPE
The type of clock inter-chassis topo..
1.3.6.1.4.1.2011.5.25.186.1.15.1.2INTEGER {interlink(1)}read-onlycurrent
hwClockClusterTopoLinkType
OBJECT-TYPE
The type of clock inter-chassis link.
1.3.6.1.4.1.2011.5.25.186.1.15.1.3INTEGER {bits(1)}read-onlycurrent
hwClockClusterTopoStatus
OBJECT-TYPE
The status of clock inter-chassis topo.
1.3.6.1.4.1.2011.5.25.186.1.15.1.4INTEGER {fail(1), success(2)}read-onlycurrent
hwClockSmartClockPortCfgTable
OBJECT-TYPE
This table is used to read and set parameters related to the SmartClock module.
1.3.6.1.4.1.2011.5.25.186.1.16not-accessiblecurrent
hwClockSmartClockPortCfgEntry
OBJECT-TYPE
The entry of SmartClock clock port config table.
1.3.6.1.4.1.2011.5.25.186.1.16.1not-accessiblecurrent
hwClockSmartClockIfIndex
OBJECT-TYPE
This object indicates a port index.
1.3.6.1.4.1.2011.5.25.186.1.16.1.1InterfaceIndexnot-accessiblecurrent
hwClockSmartClockPtpPriority1
OBJECT-TYPE
This object indicates the time source priority 1 for the SmartClock module.
1.3.6.1.4.1.2011.5.25.186.1.16.1.2Integer32 (0..255)read-createcurrent
hwClockSmartClockPtpPriority2
OBJECT-TYPE
This object indicates the time source priority 2 for the SmartClock module.
1.3.6.1.4.1.2011.5.25.186.1.16.1.3Integer32 (0..255)read-createcurrent
hwClockSmartClockPtpDomain
OBJECT-TYPE
This object indicates the domain to which the SmartClock module's time source belongs.
1.3.6.1.4.1.2011.5.25.186.1.16.1.4Integer32 (0..255)read-createcurrent
hwClockSmartClockSatelliteNumber
OBJECT-TYPE
This object indicates the number of satellites that the SmartClock module traces. If the module is not installed, the default value is invalid(255).
1.3.6.1.4.1.2011.5.25.186.1.16.1.5Integer32 (0..255)read-onlycurrent
hwClockSmartClockPtpClockClass
OBJECT-TYPE
This object indicates the quality level of the time source traced by the SmartClock module. If the module is not installed, the default value is invalid(256).
1.3.6.1.4.1.2011.5.25.186.1.16.1.6Integer32 (0..256)read-onlycurrent
hwClockSmartClockSyncESsm
OBJECT-TYPE
This object indicates the SSM value of the time source traced by the SmartClock module. If the module is not installed, the default value is invalid(0).
1.3.6.1.4.1.2011.5.25.186.1.16.1.7INTEGER {invalid(0), ssmPrc(1), ssmSsut(2), ssmSsul(3), ssmSec(4), ssmDnu(5), ssmUnknown(6)}read-onlycurrent
hwClockSmartClockFreqLockStat
OBJECT-TYPE
This object indicates the frequency lockout flag of the SmartClock module. If the module is not installed, the default value is invalid(2).
1.3.6.1.4.1.2011.5.25.186.1.16.1.8INTEGER {unlock(0), lock(1), invalid(2)}read-onlycurrent
hwClockSmartClockTimeLockStat
OBJECT-TYPE
This object indicates the time lockout flag of the SmartClock module. If the module is not installed, the default value is invalid(2).
1.3.6.1.4.1.2011.5.25.186.1.16.1.9INTEGER {unlock(0), lock(1), invalid(2)}read-onlycurrent
hwClockSmartClockPortCfgRowStatus
OBJECT-TYPE
The row status.
1.3.6.1.4.1.2011.5.25.186.1.16.1.10RowStatusread-createcurrent
hwClockSmartPlugInFlag
OBJECT-TYPE
This object indicates whether the SmartClock module is installed. If the module is not installed, the default value is offline(1).
1.3.6.1.4.1.2011.5.25.186.1.16.1.11INTEGER {offline(1), online(2)}read-onlycurrent
hwClockSmartClockLatitude
OBJECT-TYPE
This object indicates the latitude of the SmartClock module. If the module is not installed, the default value is invalid.
1.3.6.1.4.1.2011.5.25.186.1.16.1.12OCTET STRINGread-onlycurrent
hwClockSmartClockLongitude
OBJECT-TYPE
This object indicates the longitude of the SmartClock module. If the module is not installed, the default value is invalid.
1.3.6.1.4.1.2011.5.25.186.1.16.1.13OCTET STRINGread-onlycurrent
hwClockSmartClockAltitude
OBJECT-TYPE
This object indicates the altitude of the SmartClock module. If the module is not installed, the default value is invalid.
1.3.6.1.4.1.2011.5.25.186.1.16.1.14OCTET STRINGread-onlycurrent
hwClockSmartClockWorkMode
OBJECT-TYPE
This object indicates the working mode of the GPS receiver on the SmartClock module. If the module is not installed, the default value is invalid(1).
1.3.6.1.4.1.2011.5.25.186.1.16.1.15INTEGER {invalid(1), position(2), hold(3), auto(4)}read-onlycurrent
hwClockSmartClockLeapSecond
OBJECT-TYPE
This object indicates the leap second of the SmartClock module. If the module is not installed, the default value is invalid(255).
1.3.6.1.4.1.2011.5.25.186.1.16.1.16Integer32 (0..255)read-onlycurrent
hwClockSmartClockSatelliteCno
OBJECT-TYPE
This object indicates the signal-to-noise ratio of the tracing satellite for the SmartClock module. If the module is not installed, the default value is invalid.
1.3.6.1.4.1.2011.5.25.186.1.16.1.17OCTET STRINGread-onlycurrent
hwClockSmartClockGpsTime
OBJECT-TYPE
This object indicates the GPS time of the SmartClock module. If the module is not installed, the default value is invalid.
1.3.6.1.4.1.2011.5.25.186.1.16.1.18OCTET STRINGread-onlycurrent
hwClockCesSerialCfgTable
OBJECT-TYPE
This table is used to configure the CES clock mode for serial interfaces.
1.3.6.1.4.1.2011.5.25.186.1.17not-accessiblecurrent
hwClockCesSerialCfgEntry
OBJECT-TYPE
The entry of CES Serial Cfg table.
1.3.6.1.4.1.2011.5.25.186.1.17.1not-accessiblecurrent
hwClockCesSerialChassisIndex
OBJECT-TYPE
This object indicates the chassis index.
1.3.6.1.4.1.2011.5.25.186.1.17.1.1PhysicalIndexnot-accessiblecurrent
hwClockCesSerialIfIndex
OBJECT-TYPE
This object indicates the serial interface index.
1.3.6.1.4.1.2011.5.25.186.1.17.1.2InterfaceIndexnot-accessiblecurrent
hwClockCesSerialName
OBJECT-TYPE
This object indicates the serial interface name.
1.3.6.1.4.1.2011.5.25.186.1.17.1.3OCTET STRINGread-onlycurrent
hwClockCesSerialRowStatus
OBJECT-TYPE
The row status.
1.3.6.1.4.1.2011.5.25.186.1.17.1.4RowStatusread-createcurrent
hwClockCesSerialMode
OBJECT-TYPE
This object is used to set serial interface clock mode.
1.3.6.1.4.1.2011.5.25.186.1.17.1.5INTEGER {acr(1), dcr(2), none(3)}read-createcurrent
hwClockConformance
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.186.10
hwClockSourceCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.186.10.1
hwClockSourceGroups
OBJECT-IDENTITY
1.3.6.1.4.1.2011.5.25.186.10.2

Notifications

NameOIDStatus
hwClockSourceSwitch
NOTIFICATION-TYPE
Clock source switch notification.
1.3.6.1.4.1.2011.5.25.186.1.8.1current
hwClockSourceSysClkLockModeChange
NOTIFICATION-TYPE
The lock mode of system clock source change notification.
1.3.6.1.4.1.2011.5.25.186.1.8.2current
hwClockSourceStateChange
NOTIFICATION-TYPE
The state of clock source change notification.
1.3.6.1.4.1.2011.5.25.186.1.8.3current
hwClockSourceStateResume
NOTIFICATION-TYPE
The state of clock source resume notification.
1.3.6.1.4.1.2011.5.25.186.1.8.4current
hwClockSourceFreqCheck
NOTIFICATION-TYPE
The result of clock source frequnce check abnormal notification.
1.3.6.1.4.1.2011.5.25.186.1.8.5current
hwClockSourceOutputBelowThreshold
NOTIFICATION-TYPE
The SSM of output below threshold notification.
1.3.6.1.4.1.2011.5.25.186.1.8.6current
hwClockNotInLockedMode
NOTIFICATION-TYPE
The work mode of system clock is not in locked mode.
1.3.6.1.4.1.2011.5.25.186.1.8.7current
hwClockInLockedMode
NOTIFICATION-TYPE
The work mode of system clock is in locked mode.
1.3.6.1.4.1.2011.5.25.186.1.8.8current
hwClockSourceFailed
NOTIFICATION-TYPE
The state of clock source is failed.
1.3.6.1.4.1.2011.5.25.186.1.8.11current
hwClockSourceValid
NOTIFICATION-TYPE
The state of clock source is valid.
1.3.6.1.4.1.2011.5.25.186.1.8.12current
hwClockSourceFreqCheckResume
NOTIFICATION-TYPE
The result of clock source frequnce check normal notification.
1.3.6.1.4.1.2011.5.25.186.1.8.13current
hwClockSourceOutputBelowThresholdResume
NOTIFICATION-TYPE
The SSM of output above threshold notification.
1.3.6.1.4.1.2011.5.25.186.1.8.14current
hwClockCesAcrMasterPwChange
NOTIFICATION-TYPE
CES ACR master PW status change.
1.3.6.1.4.1.2011.5.25.186.1.8.15current
hwClockCesAcrLockFail
NOTIFICATION-TYPE
CES ACR clock source lock fail.
1.3.6.1.4.1.2011.5.25.186.1.8.16current
hwClockCesAcrLockFailResume
NOTIFICATION-TYPE
CES ACR clock source lock fail resume.
1.3.6.1.4.1.2011.5.25.186.1.8.17current
hwClockClusterTopoFail
NOTIFICATION-TYPE
Clock cluster inter-chassis synchronization topo compute failed.
1.3.6.1.4.1.2011.5.25.186.1.8.22current
hwClockClusterTopoFailResume
NOTIFICATION-TYPE
Clock inter-chassis synchronization topo compute successfully.
1.3.6.1.4.1.2011.5.25.186.1.8.23current
hwClockSourceInputBelowThreshold
NOTIFICATION-TYPE
The SSM of input below threshold notification.
1.3.6.1.4.1.2011.5.25.186.1.8.24current
hwClockSourceInputBelowThresholdResume
NOTIFICATION-TYPE
The SSM of input above or equal threshold notification.
1.3.6.1.4.1.2011.5.25.186.1.8.25current
hwClockSsmPktLos
NOTIFICATION-TYPE
The ssm packet of clock source is lost.
1.3.6.1.4.1.2011.5.25.186.1.8.26current
hwClockSsmPktLosResume
NOTIFICATION-TYPE
The ssm packet of clock source is normal.
1.3.6.1.4.1.2011.5.25.186.1.8.27current
hwClockCesDcrMasterPwChange
NOTIFICATION-TYPE
CES DCR master PW status change.
1.3.6.1.4.1.2011.5.25.186.1.8.28current
hwClockCesDcrLockFail
NOTIFICATION-TYPE
CES DCR clock source lock fail.
1.3.6.1.4.1.2011.5.25.186.1.8.29current
hwClockCesDcrLockFailResume
NOTIFICATION-TYPE
CES DCR clock source lock fail resume.
1.3.6.1.4.1.2011.5.25.186.1.8.30current
hwClockSourceSsmChange
NOTIFICATION-TYPE
The SSM quality of clock source change notification.
1.3.6.1.4.1.2011.5.25.186.1.8.31current
hwClockFMSwitch
NOTIFICATION-TYPE
Clock select mode is force or manual.
1.3.6.1.4.1.2011.5.25.186.1.8.32current
hwClockFMSwitchResume
NOTIFICATION-TYPE
Clock select mode is automative.
1.3.6.1.4.1.2011.5.25.186.1.8.33current
hwClockSyncBad
NOTIFICATION-TYPE
Clock frequency synchronization bad.
1.3.6.1.4.1.2011.5.25.186.1.8.34current
hwClockSyncBadResume
NOTIFICATION-TYPE
Clock frequency synchronization bad resume.
1.3.6.1.4.1.2011.5.25.186.1.8.35current
hwClockPortNonSupport
NOTIFICATION-TYPE
In current link mode, the hardware, such as boards and optical modules, do not support physical-layer clock synchronization.
1.3.6.1.4.1.2011.5.25.186.1.8.36current
hwClockPortNonSupportResume
NOTIFICATION-TYPE
The alarm that the hardware do not support physical-layer clock synchronization is resumed.
1.3.6.1.4.1.2011.5.25.186.1.8.37current
hwClockGnssModelChange
NOTIFICATION-TYPE
The smart clock gnss model changed.
1.3.6.1.4.1.2011.5.25.186.1.8.38current

Conformance

NameOIDStatus
hwClockSourceCompliance
MODULE-COMPLIANCE
The compliance of clock MIB.
1.3.6.1.4.1.2011.5.25.186.10.1.1current
hwClockManageSysGroup
OBJECT-GROUP
The manage group.
1.3.6.1.4.1.2011.5.25.186.10.2.8current
hwClockSysSelGroup
OBJECT-GROUP
The system selection group.
1.3.6.1.4.1.2011.5.25.186.10.2.9current
hwClockSourceCfgGroup
OBJECT-GROUP
The clock source group.
1.3.6.1.4.1.2011.5.25.186.10.2.10current
hwClockPortCfgGroup
OBJECT-GROUP
The port config of clock source group.
1.3.6.1.4.1.2011.5.25.186.10.2.13current
hwClockBitsCfgGroup
OBJECT-GROUP
The BITS clock source group.
1.3.6.1.4.1.2011.5.25.186.10.2.14current
hwClockTrapOidGroup
OBJECT-GROUP
The clock trap group.
1.3.6.1.4.1.2011.5.25.186.10.2.15current
hwClockNotificationsGroup
NOTIFICATION-GROUP
This is the group of clock notification.
1.3.6.1.4.1.2011.5.25.186.10.2.16current
hwClockLineCfgGroup
OBJECT-GROUP
The line clock group..
1.3.6.1.4.1.2011.5.25.186.10.2.17current