HPN-ICF-LswVLAN-MIB
- Registered at
- 1.3.6.1.4.1.11.2.14.11.15.8.35.2
- Last updated
- 2001-12-26 14:52
- Namespace
- hp
- Source file
HPN-ICF-LswVLAN-MIB- Digest
sha256:c9c0dcc47a7fa397c2ff4ad7b1c9120da0a7a59120eca21e5f09ad2e49c464b6
Imports
| From | Symbols |
|---|---|
| HPN-ICF-LswINF-MIB | PortList, hpnicfifVLANTrunkStatusEntry |
| HPN-ICF-OID-MIB | hpnicflswCommon |
| IF-MIB | ifEntry |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TimeInterval, TruthValue |
Imported by
2 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HPN-ICF-LswINF-MIB HPN-ICF-LswVLAN-MIB HPN-ICF-OID-MIB IANAifType-MIB IF-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| HpnicfVlanIndex TEXTUAL-CONVENTION A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see VlanId textual convention). If the value is greater than 4095 then it represents a VLAN with scope local to the particular agent, i.e. one without a global VLAN-ID assigned to it. Such VLANs are outside the scope of IEEE 802.1Q but it is convenient to be able to manage them in the same way using this MIB. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hpnicfLswVlanMngObject OBJECT-IDENTITY Description. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1 | current | ||
| hpnicfdot1qVlanMIBTable OBJECT-TYPE VLAN MIB table | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1 | not-accessible | current | |
| hpnicfdot1qVlanMIBEntry OBJECT-TYPE Entries of VLAN MIB table | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1 | not-accessible | current | |
| hpnicfdot1qVlanIndex OBJECT-TYPE The VLAN-ID. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.1 | HpnicfVlanIndex | read-only | current |
| hpnicfdot1qVlanName OBJECT-TYPE Name of the VLAN. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.2 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| hpnicfdot1qVlanPorts OBJECT-TYPE Port list of the VLAN. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.3 | PortList | read-write | current |
| hpnicfdot1qVlanType OBJECT-TYPE Vlan types: SuperVlan(1), Common vlan(2), and Sub-vlan(3). | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.4 | INTEGER {superVlan(1), common-vlan(2), sub-vlan(3), isolate-user-vlan(4), secondary-vlan(5), primaryVlan(6)} | read-write | current |
| hpnicfdot1qVlanMacFilter OBJECT-TYPE Whether to filter MAC addresses. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.5 | TruthValue | read-only | current |
| hpnicfdot1qVlanMcastUnknownProtos OBJECT-TYPE Whether to broadcast the unknown packets. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.6 | TruthValue | read-only | current |
| hpnicfExistInterface OBJECT-TYPE Whether there is virtual interface. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.7 | TruthValue | read-only | current |
| hpnicfVlanInterfaceIndex OBJECT-TYPE Whether vlan interface is configured on vlan. If vlan interface is configured, the value of the node is vlan id, else the value is 0. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.8 | INTEGER | read-only | current |
| hpnicfdot1qVlanMacLearn OBJECT-TYPE MAC address learning identity. (common vlan/Sub-vlan) | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.9 | TruthValue | read-only | current |
| hpnicfdot1qVlanStatus OBJECT-TYPE Status of the VLAN. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.10 | INTEGER {other(1), static(2), dynamic(3)} | read-only | current |
| hpnicfdot1qVlanCreationTime OBJECT-TYPE The sysUPTime when the VLAN is created. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.11 | TimeTicks | read-only | current |
| hpnicfdot1qVlanPriority OBJECT-TYPE Priority of the VLAN. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.12 | INTEGER (0..7) | read-write | current |
| hpnicfdot1qVlanRowStatus OBJECT-TYPE Operation status. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.13 | RowStatus | read-create | current |
| hpnicfdot1qVlanBroadcastSuppression OBJECT-TYPE Whether broadcast suppression of vlan be supported pro rata. The vlaue of 100 indicates no broadcast suppression. If the function is not supported, this object cannot be written, and 100 will be returned when reading | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.14 | INTEGER (0..100) | read-write | current |
| hpnicfdot1qVlanBcastSuppressionPPS OBJECT-TYPE If the broadcast can be controlled with pps(packet per second)type, the value of 0 indicates no suppression. This node is conflicted with hpnicfdot1qVlanBroadcastSuppression. If the mode is set, hpnicfdot1qVlanBroadcastSuppression is unavailable. And vice versa. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.15 | INTEGER (0..148800) | read-write | current |
| hpnicfdot1qVlanMulticast OBJECT-TYPE Multicast vlan. The default value is disable(0). | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.16 | INTEGER {disable(0), enable(1)} | read-write | current |
| hpnicfdot1qVlanTaggedPorts OBJECT-TYPE Tagged port list of the VLAN. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.17 | PortList | read-only | current |
| hpnicfdot1qVlanUntaggedPorts OBJECT-TYPE Untagged port list of the VLAN. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.18 | PortList | read-only | current |
| hpnicfdot1qVlanPortIndexs OBJECT-TYPE PortIndex list of the VLAN, that delimited by comma, such as 1,3,4,7. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.19 | OCTET STRING | read-write | current |
| hpnicfVlanInterfaceTable OBJECT-TYPE Virtual interface configuration table | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2 | not-accessible | current | |
| hpnicfVlanInterfaceEntry OBJECT-TYPE Entries of virtual interface configuration table | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1 | not-accessible | current | |
| hpnicfVlanInterfaceID OBJECT-TYPE Index of the vlan interface table. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.1 | INTEGER | read-only | current |
| hpnicfdot1qVlanID OBJECT-TYPE VLAN-ID | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.2 | HpnicfVlanIndex | read-only | current |
| hpnicfdot1qVlanIpAddress OBJECT-TYPE IP address of interface. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.3 | IpAddress | read-write | current |
| hpnicfdot1qVlanIpAddressMask OBJECT-TYPE IP address mask of interface. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.4 | IpAddress | read-write | current |
| hpnicfVlanInterfaceAdminStatus OBJECT-TYPE Status of VLAN virtual interfaces. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.5 | INTEGER {up(1), down(2)} | read-write | current |
| hpnicfVlanInterfaceFrameType OBJECT-TYPE Frame type accepted by VLAN virtual interfaces. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.6 | INTEGER {ethernet-ii(1), ethernet-snap(2), ethernet-8022(3), ethernet-8023(4)} | read-only | current |
| hpnicfInterfaceRowStatus OBJECT-TYPE Operation status. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.7 | RowStatus | read-create | current |
| hpnicfVlanInterfaceIpMethod OBJECT-TYPE Vlan interface ip address acquiring method which is manual, dhcp or bootp. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.8 | INTEGER {assigned-ip(1), dhcp-ip(2), bootp-ip(3)} | read-write | current |
| hpnicfVlanInterfaceIfIndex OBJECT-TYPE IfIndex of VLAN interface. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.9 | INTEGER | read-only | current |
| hpnicfifIsolateMappingTable OBJECT-TYPE Secondary vlan lists of Isolate-VLANs. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.4 | not-accessible | current | |
| hpnicfifIsolateMappingEntry OBJECT-TYPE Secondary vlan lists of Isolate-VLANs. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.4.1 | not-accessible | current | |
| hpnicfifIsolatePrimaryVlanID OBJECT-TYPE Primary VLAN-ID. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.4.1.1 | HpnicfVlanIndex | read-only | current |
| hpnicfifIsolateSecondaryVlanlistLow OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.4.1.2 | OCTET STRING (SIZE(0..256)) | read-write | current |
| hpnicfifIsolateSecondaryVlanlistHigh OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.4.1.3 | OCTET STRING (SIZE(0..256)) | read-write | current |
| hpnicfVlanInterfaceAddrTable OBJECT-TYPE VLAN interface IP address configuration table | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5 | not-accessible | current | |
| hpnicfVlanInterfaceAddrEntry OBJECT-TYPE Entries of VLAN interface IP address configuration table | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1 | not-accessible | current | |
| hpnicfVlanInterfaceIpIfIndex OBJECT-TYPE Index of VLAN interfaces. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1.1 | INTEGER | read-only | current |
| hpnicfVlanInterfaceIpAddr OBJECT-TYPE IP address of VLAN interface. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1.2 | IpAddress | read-only | current |
| hpnicfVlanInterfaceIpMask OBJECT-TYPE IP address mask of VLAN interface. When destory single IP address, you must set it correct to relative IP address. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1.3 | IpAddress | read-create | current |
| hpnicfVlanInterfaceIpType OBJECT-TYPE IP address type. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1.4 | INTEGER {primary(1), sub(2), cluster(3), vrrp(4)} | read-create | current |
| hpnicfVlanInterfaceIpRowStatus OBJECT-TYPE Operation status. active(1) will only be set when taking GET or GET NEXT operation. createAndGo(4) and destory(6) is valid when taking SET operation. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1.5 | RowStatus | read-create | current |
| hpnicfDot1qVlanBatchMIBTable OBJECT-TYPE VLAN batch configuration table. In the case of VLAN batch creation, hpnicfdot1qVlanBatchSetOperate should be set to 1. For example, if creating a row is for creating VLANs 2 to 4, the value of the objects should be set as follows: hpnicfdot1qVlanBatchStartIndex 2, hpnicfdot1qVlanBatchEndIndex 4, hpnicfdot1qVlanBatchSetOperate create(1), hpnicfdot1qVlanBatchRowStatus createAndGo(4). In the case of VLAN batch deletion, hpnicfdot1qVlanBatchSetOperate should be set to 2. For example, if creating a row is for deleting VLANs 10 to 20, the value of the objects should be set as follows: hpnicfdot1qVlanBatchStartIndex 10, hpnicfdot1qVlanBatchEndIndex 20, hpnicfdot1qVlanBatchSetOperate delete(2), hpnicfdot1qVlanBatchRowStatus createAndGo(4). When the action of batch VLANs deleting or creating is done, one row will be existent until it is deleted manually or ages out, but the VLANs of it won't disappear with the deletion of the row. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6 | not-accessible | current | |
| hpnicfDot1qVlanBatchMIBEntry OBJECT-TYPE VLAN batch configuration entry. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1 | not-accessible | current | |
| hpnicfdot1qVlanBatchOperIndex OBJECT-TYPE The consequence of operation. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.1 | Integer32 | read-only | current |
| hpnicfdot1qVlanBatchStartIndex OBJECT-TYPE The value of start VLAN-ID. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.2 | HpnicfVlanIndex | read-write | current |
| hpnicfdot1qVlanBatchEndIndex OBJECT-TYPE The value of end VLAN-ID. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.3 | HpnicfVlanIndex | read-write | current |
| hpnicfdot1qVlanBatchOperStatus OBJECT-TYPE The status of operation. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.4 | INTEGER {opInprogress(1), opfailure(2), opsuccess(3), opsuccesspartial(4)} | read-only | current |
| hpnicfdot1qVlanBatchRowStatus OBJECT-TYPE The row status of HpnicfDot1qVlanBatchMIBEntry. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.5 | RowStatus | read-create | current |
| hpnicfdot1qVlanBatchSetOperate OBJECT-TYPE VLAN batch creation or deletion. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.6 | INTEGER {create(1), delete(2)} | read-create | current |
| hpnicfifSuperVlanMappingTable OBJECT-TYPE Sub VLAN lists of super-VLANs. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7 | not-accessible | current | |
| hpnicfifSuperVlanMappingEntry OBJECT-TYPE Sub VLAN lists of super-VLANs. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7.1 | not-accessible | current | |
| hpnicfifSuperVlanID OBJECT-TYPE Super VLAN ID. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7.1.1 | HpnicfVlanIndex | read-only | current |
| hpnicfifSubVlanlistLow OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each sub VLAN of the super VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is a sub VLAN of the super VLAN; the VLAN is not a sub VLAN of the super VLAN if its bit has a value of '0'. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7.1.2 | OCTET STRING (SIZE(0..256)) | read-write | current |
| hpnicfifSubVlanlistHigh OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each sub VLAN of the super VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is a sub VLAN of the super VLAN; the VLAN is not a sub VLAN of the super VLAN if its bit has a value of '0'. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7.1.3 | OCTET STRING (SIZE(0..256)) | read-write | current |
| hpnicfPrivateVlanMappingTable OBJECT-TYPE Secondary vlan lists of Primary-VLANs. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8 | not-accessible | current | |
| hpnicfPrivateVlanMappingEntry OBJECT-TYPE Secondary vlan lists of Primary-VLANs. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8.1 | not-accessible | current | |
| hpnicfPrimaryVlanID OBJECT-TYPE Primary VLAN-ID. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8.1.1 | HpnicfVlanIndex | read-only | current |
| hpnicfSecondaryVlanlistLow OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8.1.2 | OCTET STRING (SIZE(0..256)) | read-write | current |
| hpnicfSecondaryVlanlistHigh OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8.1.3 | OCTET STRING (SIZE(0..256)) | read-write | current |
| hpnicfLswVlanProtoObject OBJECT-IDENTITY Description. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.2 | current | ||
| hpnicfVLANMibGarpLeaveAllTime OBJECT-TYPE The GARP LeaveAll time, in centiseconds. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.14 | TimeInterval | read-write | current |
| hpnicfvLANMibSwitchCountTable OBJECT-TYPE A table containing the information various statistics of switch. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15 | not-accessible | current | |
| hpnicfvLANMibSwitchCountEntry OBJECT-TYPE A table containing the information various statistics of switch. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1 | not-accessible | current | |
| hpnicfVLANMibSwitchGMRPRXPkt OBJECT-TYPE Number of GMRP frames received. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.1 | Counter32 | read-only | current |
| hpnicfVLANMibSwitchGVRPRXPkt OBJECT-TYPE Number of GVRP frames received. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.2 | Counter32 | read-only | current |
| hpnicfVLANMibSwitchGMRPTXPkt OBJECT-TYPE Number of GMRP frames transmitted. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.3 | Counter32 | read-only | current |
| hpnicfVLANMibSwitchGVRPTXPkt OBJECT-TYPE Number of GVRP frames transmitted. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.4 | Counter32 | read-only | current |
| hpnicfVLANMibSwitchDiscardedPkt OBJECT-TYPE Number of discarded frames. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.5 | Counter32 | read-only | current |
| hpnicfVLANMibSwitchGarpStatClear OBJECT-TYPE Clear various Statistics viz. read operation not supported. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.6 | INTEGER {clear(1)} | read-write | current |
| hpnicfvLANMibHoldTimeTable OBJECT-TYPE A table for setting/getting the Hold Time for a particular port. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.16 | not-accessible | current | |
| hpnicfvLANMibHoldTimeEntry OBJECT-TYPE A table for setting/getting the HoldTime of the port. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.16.1 | not-accessible | current | |
| hpnicfVLANMibHoldTime OBJECT-TYPE HoldTime of the port. | 1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.16.1.1 | INTEGER (10..32765) | read-write | current |