MIBs Depot

HPN-ICF-LswINF-MIB

Registered at
1.3.6.1.4.1.11.2.14.11.15.8.35.1
1.3.6.1.4.1.11.2.14.11.15.8.35.5
Last updated
2001-06-29 00:00
Revisions
2001-06-29 00:00
Namespace
hp
Source file
HPN-ICF-LswINF-MIB
Digest
sha256:e4e00806687d763037571a6499ba24713cfd5a28b576b6d21a4555c9db9fe775

Imports

FromSymbols
HPN-ICF-OID-MIBhpnicflswCommon
IF-MIBInterfaceIndex, ifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HPN-ICF-LswINF-MIB
HPN-ICF-OID-MIB
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
DropDirection
TEXTUAL-CONVENTION
Representing the direction of dropping packets, if applicable.
current
PortList
TEXTUAL-CONVENTION
Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
current
SpeedModeFlag
TEXTUAL-CONVENTION
Type of Negotiable Speed mode.
current
VlanIndex
TEXTUAL-CONVENTION
A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see VlanId textual convention). If the value is greater than 4095 then it represents a VLAN with scope local to the particular agent, i.e. one without a global VLAN-ID assigned to it. Such VLANs are outside the scope of IEEE 802.1Q but it is convenient to be able to manage them in the same way using this MIB.
current

Objects

NameOIDSyntaxAccessStatus
hpnicfLswExtInterface
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.8.35.1
hpnicfifXXTable
OBJECT-TYPE
Extended interface information table.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1not-accessiblecurrent
hpnicfifXXEntry
OBJECT-TYPE
Entries of extended interface information table.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1not-accessiblecurrent
hpnicfifUnBoundPort
OBJECT-TYPE
Whether it is the unbound port. (true indicates that the port is the main port of the aggregation or the port does not participate in the aggregation.)
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.1TruthValueread-onlycurrent
hpnicfifISPhyPort
OBJECT-TYPE
Whether it is a physical interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.2TruthValueread-onlycurrent
hpnicfifAggregatePort
OBJECT-TYPE
Whether it is the aggregated port. (if the port participates in the aggregation, this value is true.)
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.3TruthValueread-onlycurrent
hpnicfifMirrorPort
OBJECT-TYPE
Whether it is a mirror port.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.4TruthValueread-writecurrent
hpnicfifVLANType
OBJECT-TYPE
port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.5INTEGER {vLANTrunk(1), access(2), hybrid(3), fabric(4)}read-writecurrent
hpnicfifMcastControl
OBJECT-TYPE
Broadcast storm suppression with the step length of 1, ranging from 0 to 100 percent. In some products the step is 5, ranging from 0 to 100.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.6INTEGER (0..100)read-writecurrent
hpnicfifFlowControl
OBJECT-TYPE
Flow control status.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.7TruthValueread-writecurrent
hpnicfifSrcMacControl
OBJECT-TYPE
Whether to filter by source MAC address.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.8TruthValueread-onlycurrent
hpnicfifClearStat
OBJECT-TYPE
Clear specify port statistics. Operation read is not supported.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.9INTEGER {clear(1)}read-writecurrent
hpnicfifXXBasePortIndex
OBJECT-TYPE
Index number of the port and the first port index of the device is 1.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.10INTEGERread-onlycurrent
hpnicfifXXDevPortIndex
OBJECT-TYPE
Device index of the port.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.11INTEGERread-onlycurrent
hpnicfifPpsMcastControl
OBJECT-TYPE
The broadcast suppression with pps(packet per second) type. The max value is determined by the port type and product.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.12Integer32read-writecurrent
hpnicfifPpsBcastDisValControl
OBJECT-TYPE
Control the port's pps(packet per second) broadcast suppression. When the port is enabled, its pps broadcast suppression value is the global disperse value, and when disabled, it doesn't suppress broadcast.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.13INTEGER {enable(1), disable(2)}read-writecurrent
hpnicfifUniSuppressionStep
OBJECT-TYPE
The step of unicast suppression in ratio mode.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.14Integer32read-onlycurrent
hpnicfifPpsUniSuppressionMax
OBJECT-TYPE
The max pps(packet per second) value of unicast suppression in pps mode.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.15Integer32read-onlycurrent
hpnicfifMulSuppressionStep
OBJECT-TYPE
The step of multicast suppression in ratio mode.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.16Integer32read-onlycurrent
hpnicfifPpsMulSuppressionMax
OBJECT-TYPE
The max pps(packet per second) value of multicast suppression in pps mode.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.17Integer32read-onlycurrent
hpnicfifUniSuppression
OBJECT-TYPE
The unicast suppression with the ranging from 0 to 100 percent in ratio mode. The step is determined by hpnicfifUniSuppressionStep.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.18Integer32read-writecurrent
hpnicfifPpsUniSuppression
OBJECT-TYPE
The unicast suppression in pps(packet per second) mode. The max value is determined by hpnicfifPpsUniSuppressionMax.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.19Integer32read-writecurrent
hpnicfifMulSuppression
OBJECT-TYPE
The multicast suppression with ranging from 0 to 100 percent in ratio mode. The step is determined by hpnicfifMulSuppressionStep.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.20Integer32read-writecurrent
hpnicfifPpsMulSuppression
OBJECT-TYPE
The multicast suppression in pps(packet per second) mode. The max pps value is determined by hpnicfifPpsMulSuppressionMax.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.21Integer32read-writecurrent
hpnicfifComboActivePort
OBJECT-TYPE
Active port on combo interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.22INTEGER {fiber(1), copper(2), na(3)}read-writeobsolete
hpnicfifBMbpsMulSuppressionMax
OBJECT-TYPE
The maximum value of the multicast suppression with bandwidth-based(Mbps) that a port can be configured.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.23Integer32read-onlycurrent
hpnicfifBMbpsMulSuppression
OBJECT-TYPE
With bandwidth-based multicast suppression, the bandwidth is measured in Mbps. The upper limit of the multicast suppession with bandwidth-based(Mbps) is the value of hpnicfifBMbpsMulSuppressionMax in the entry. The default value of hpnicfifBMbpsMulSuppression is the value of hpnicfifBMbpsMulSuppressionMax.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.24Integer32read-writecurrent
hpnicfifBKbpsMulSuppressionMax
OBJECT-TYPE
The maximum value of the multicast suppression with bandwidth-based(Kbps) that a port can be configured.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.25Integer32read-onlycurrent
hpnicfifBKbpsMulSuppressionStep
OBJECT-TYPE
The step of multicast suppression with bandwidth-based(Kbps).
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.26Integer32read-onlycurrent
hpnicfifBKbpsMulSuppression
OBJECT-TYPE
With bandwidth-based multicast suppression, the bandwidth is measured in Kbps. The upper limit of the multicast suppession with bandwidth-based(Kbps) is the value of hpnicfifBKbpsMulSuppressionMax in the entry. The value of hpnicfifBKbpsMulSuppression must be multiple of the value of hpnicfifBKbpsMulSuppressionStep. The default value of hpnicfifBKbpsMulSuppression is the value of hpnicfifBKbpsMulSuppressionMax.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.27Integer32read-writecurrent
hpnicfifUnknownPacketDropMul
OBJECT-TYPE
Control the port's unknown-multicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-multicast packets in inbound direction. When outbound direction is enabled on this port, the port will drop unknown-multicast packets in outbound direction. When both directions are enabled on this port, the port will drop unknown-multicast packets in both inbound and outbound directions.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.28DropDirectionread-writecurrent
hpnicfifUnknownPacketDropUni
OBJECT-TYPE
Control the port's unknown-unicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-unicast packets in inbound direction. When outbound direction is enabled on this port, the port will drop unknown-unicast packets in outbound direction. When both directions are enabled on this port, the port will drop unknown-unicast packets in both inbound and outbound directions.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.29DropDirectionread-writecurrent
hpnicfifBMbpsUniSuppressionMax
OBJECT-TYPE
The maximum value of the unicast suppression with bandwidth-based (Mbps) that a port can be configured.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.30Integer32read-onlycurrent
hpnicfifBMbpsUniSuppression
OBJECT-TYPE
With bandwidth-based Unicast suppression, the bandwidth is measured in Mbps. The upper limit of the unicast suppession with bandwidth-based(Mbps) is the value of hpnicfifBMbpsUniSuppressionMax in the entry. The default value of hpnicfifBMbpsUniSuppression is the value of hpnicfifBMbpsUniSuppressionMax.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.31Integer32read-writecurrent
hpnicfifBKbpsUniSuppressionMax
OBJECT-TYPE
The maximum value of the unicast suppression with bandwidth-based (Kbps) that a port can be configured.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.32Integer32read-onlycurrent
hpnicfifBKbpsUniSuppressionStep
OBJECT-TYPE
The step of unicast suppression with bandwidth-based(Kbps).
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.33Integer32read-onlycurrent
hpnicfifBKbpsUniSuppression
OBJECT-TYPE
With bandwidth-based unicast suppression, the bandwidth is measured in Kbps. The upper limit of the unicast suppession with bandwidth-based(Kbps) is the value of hpnicfifBKbpsUniSuppressionMax in the entry. The value of hpnicfifBKbpsUniSuppression must be multiple of the value of hpnicfifBKbpsUniSuppressionStep. The default value of hpnicfifBKbpsUniSuppression is the value of hpnicfifBKbpsUniSuppressionMax.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.34Integer32read-writecurrent
hpnicfifOutPayloadOctets
OBJECT-TYPE
The actual output octets of the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.35Counter64read-onlycurrent
hpnicfifInPayloadOctets
OBJECT-TYPE
The actual input octets of the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.36Counter64read-onlycurrent
hpnicfifInErrorPktsRate
OBJECT-TYPE
The rate of inbound error packets on the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.37Integer32read-onlycurrent
hpnicfifInPkts
OBJECT-TYPE
The number of packets received on the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.38Counter64read-onlycurrent
hpnicfifInNormalPkts
OBJECT-TYPE
The number of normal packets received on the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.39Counter64read-onlycurrent
hpnicfifOutPkts
OBJECT-TYPE
The number of packets sent on the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.40Counter64read-onlycurrent
hpnicfifAggregateTable
OBJECT-TYPE
Port aggregation information table.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.2not-accessiblecurrent
hpnicfifAggregateEntry
OBJECT-TYPE
Port aggregation information table.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.2.1not-accessiblecurrent
hpnicfifAggregatePortIndex
OBJECT-TYPE
Index number of the main aggregated port.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.2.1.1InterfaceIndexread-onlycurrent
hpnicfifAggregatePortName
OBJECT-TYPE
Aggregation group name.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.2.1.2OCTET STRING (SIZE(0..40))read-writecurrent
hpnicfifAggregatePortListPorts
OBJECT-TYPE
Portlist of a aggregating.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.2.1.3PortListread-writecurrent
hpnicfifAggregateModel
OBJECT-TYPE
Load sharing mode for the port aggregation.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.2.1.4INTEGER {ingress(1), both(2), round-robin(3)}read-writecurrent
hpnicfifAggregateOperStatus
OBJECT-TYPE
Current operation status of the row.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.2.1.5RowStatusread-createcurrent
hpnicfifHybridPortTable
OBJECT-TYPE
Hybrid-port configuration table.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.3not-accessiblecurrent
hpnicfifHybridPortEntry
OBJECT-TYPE
Hybrid-port configuration table.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1not-accessiblecurrent
hpnicfifHybridPortIndex
OBJECT-TYPE
Index number of Hybrid-port.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1.1INTEGERread-onlycurrent
hpnicfifHybridTaggedVlanListLow
OBJECT-TYPE
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each tagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is tagged in the set of VLANs; the VLAN is not tagged if its bit has a value of '0'.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1.2OCTET STRING (SIZE(0..256))read-writecurrent
hpnicfifHybridTaggedVlanListHigh
OBJECT-TYPE
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each tagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is tagged in the set of VLANs; the VLAN is not tagged if its bit has a value of '0'.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1.3OCTET STRING (SIZE(0..256))read-writecurrent
hpnicfifHybridUnTaggedVlanListLow
OBJECT-TYPE
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1.4OCTET STRING (SIZE(0..256))read-writecurrent
hpnicfifHybridUnTaggedVlanListHigh
OBJECT-TYPE
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1.5OCTET STRING (SIZE(0..256))read-writecurrent
hpnicfifComboPortTable
OBJECT-TYPE
Combo-port table.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.4not-accessiblecurrent
hpnicfifComboPortEntry
OBJECT-TYPE
The entry of hpnicfifComboPortTable.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.4.1not-accessiblecurrent
hpnicfifComboPortIndex
OBJECT-TYPE
The combo-port interface index. Its value is the same as the value of ifIndex in ifTable, but only includes indexes of the combo-port interfaces.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.4.1.1InterfaceIndexread-onlycurrent
hpnicfifComboPortCurActive
OBJECT-TYPE
Current active interface of combo interfaces. The value 'fiber' means the interface with fiber connector of the pair of combo-port interfaces is active. The value 'copper' means the interface with copper connector of the pair is active. The value 'na' means not supported.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.4.1.2INTEGER {fiber(1), copper(2), na(3)}read-writecurrent
hpnicfifPktBufTable
OBJECT-TYPE
Packet buffer table.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.5not-accessiblecurrent
hpnicfifPktBufEntry
OBJECT-TYPE
The entry of hpnicfifPktBufTable.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.5.1not-accessiblecurrent
hpnicfifPktBufFree
OBJECT-TYPE
The number of packet buffers available for the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.5.1.1Integer32read-onlycurrent
hpnicfifPktBufInit
OBJECT-TYPE
The number of packet buffers allocated when the interface was created.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.5.1.2Integer32read-onlycurrent
hpnicfifPktBufMin
OBJECT-TYPE
The smallest number of packet buffers available for the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.5.1.3Integer32read-onlycurrent
hpnicfifPktBufMiss
OBJECT-TYPE
The number of times that the interface failed to obtain a packet buffer. Failure to obtain a buffer indicates that buffers were busy.
1.3.6.1.4.1.11.2.14.11.15.8.35.1.5.1.4Counter64read-onlycurrent
hpnicfLswL2InfMibObject
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1
hpnicfSlotPortMax
OBJECT-TYPE
Max ports of the slots.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.1INTEGERread-onlycurrent
hpnicfSwitchPortMax
OBJECT-TYPE
Max ports that this switch includes.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.2INTEGERread-onlycurrent
hpnicfifVLANTrunkStatusTable
OBJECT-TYPE
Gvrp attributes on the VlanTrunk port.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3not-accessiblecurrent
hpnicfifVLANTrunkStatusEntry
OBJECT-TYPE
Gvrp attributes on the VlanTrunk port.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1not-accessiblecurrent
hpnicfifVLANTrunkIndex
OBJECT-TYPE
Index number of the VLANTrunk interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.1InterfaceIndexread-onlycurrent
hpnicfifVLANTrunkGvrpRegistration
OBJECT-TYPE
GVRP registration information normal: This is the default configuration. Allow create, register and unregister vlans dynamiclly at this port. fixed: Aallow create and register vlan manually at this port. Prevent from unregistering vlans or registering known vlans of this port at another trunk port. forbidden: Unregister all vlans but vlan 1, forbid to create or register any other vlans at this port.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.2INTEGER {normal(1), fixed(2), forbidden(3)}read-writecurrent
hpnicfifVLANTrunkPassListLow
OBJECT-TYPE
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each actually passed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is actually passed in the set of VLANs; the VLAN is not actually passed if its bit has a value of '0'.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.4OCTET STRINGread-onlycurrent
hpnicfifVLANTrunkPassListHigh
OBJECT-TYPE
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each actually passed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is actually passed in the set of VLANs; the VLAN is not actually passed if its bit has a value of '0'.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.5OCTET STRINGread-onlycurrent
hpnicfifVLANTrunkAllowListLow
OBJECT-TYPE
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is allowed in the set of VLANs; the VLAN is not allowed if its bit has a value of '0'.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.6OCTET STRINGread-writecurrent
hpnicfifVLANTrunkAllowListHigh
OBJECT-TYPE
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is allowed in the set of VLANs; the VLAN is not allowed if its bit has a value of '0'.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.7OCTET STRINGread-writecurrent
hpnicfethernetTable
OBJECT-TYPE
Ethernet port attribute table.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4not-accessiblecurrent
hpnicfethernetEntry
OBJECT-TYPE
Entries of Ethernet port attribute table
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1not-accessiblecurrent
hpnicfifEthernetDuplex
OBJECT-TYPE
Ethernet interface mode.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.3INTEGER {full(1), half(2), auto(3)}read-writecurrent
hpnicfifEthernetMTU
OBJECT-TYPE
MTU on the Ethernet interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.4INTEGERread-writecurrent
hpnicfifEthernetSpeed
OBJECT-TYPE
Ethernet interface speed.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.5INTEGER {auto(0), s10M(10), s100M(100), s1000M(1000), s10000M(10000), s24000M(24000), s40000M(40000), s100000M(100000)}read-writecurrent
hpnicfifEthernetMdi
OBJECT-TYPE
Type of the line connected to the port. MDI-II (straight-through cable): 1 MDI-X (crossover cable): 2 MDI-AUTO (auto-sensing): 3
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.7INTEGER {mdi-ii(1), mdi-x(2), mdi-auto(3)}read-writecurrent
hpnicfMaxMacLearn
OBJECT-TYPE
The maximum number of MAC addresses that the port can learn. The value -1 means that the number of Mac addresses that the port can learn is unlimited.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.8INTEGER (-1..2147483647)read-writecurrent
hpnicfifMacAddressLearn
OBJECT-TYPE
This object indicates if the interface is allowed to learn mac address. eanbled(1) means the interface can learn mac address, otherwise disabled(2) can be set.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.9INTEGER {enabled(1), disabled(2)}read-onlycurrent
hpnicfifEthernetTest
OBJECT-TYPE
Test this interface. The actual testing will be different according to products. Read operation not supported.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.10INTEGER {test(1)}read-writecurrent
hpnicfifMacAddrLearnMode
OBJECT-TYPE
Status indicates mac address learn mode of the interface. IVL(1) means independent VLAN learning. SVL means shared VLAN learning.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.11INTEGER {iVL(1), sVL(2)}read-onlycurrent
hpnicfifEthernetFlowInterval
OBJECT-TYPE
Set flow interval of the ethernet. The NMS should set value to integer which is a multiple of 5.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.12INTEGER (5..300)read-writecurrent
hpnicfifEthernetIsolate
OBJECT-TYPE
Isolate group means that all ports in the same isolate group can not send and receive packets each other. Each octet within this value specifies a set of eight isolate groups, with the first octet specifying isolate groups 1 through 8, the second octet specifying isolate groups 9 through 16, etc. Within each octet, the leftmost bit is the first bit. the first bit represents the lowest numbered isolate group, and the last bit represents the highest numbered isolate group. one port can belong to more than one isolate group. Thus, each isolate group is represented by a single bit within the value of this object. If that bit has a value of '1', then that isolate group includes this port; the port is not included if its bit has a value of '0'. for example, the first octet is '10000100' means that the port is included in the isolate group 1 and isolate group 6.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.13OCTET STRINGread-writecurrent
hpnicfifVlanVPNStatus
OBJECT-TYPE
Vlan VPN enable status.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.14INTEGER {enabled(1), disabled(2)}read-writecurrent
hpnicfifVlanVPNUplinkStatus
OBJECT-TYPE
Vlan VPN uplink status.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.15INTEGER {enabled(1), disabled(2)}read-writecurrent
hpnicfifVlanVPNTPID
OBJECT-TYPE
Port based Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100. Please refer to hpnicfVlanVPNTPIDMode to get more information.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.16Integer32 (1..65535)read-writecurrent
hpnicfifIsolateGroupID
OBJECT-TYPE
Isolate group identifier. Value zero means this interface does not belong to any isolate group.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.17Integer32read-writecurrent
hpnicfifisUplinkPort
OBJECT-TYPE
Ethernet uplink status, default value is 2.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.18INTEGER {yes(1), no(2)}read-onlycurrent
hpnicfifEthernetAutoSpeedMask
OBJECT-TYPE
This object specifies which kinds of speed mode can be negotiated. Each bit corresponds to a kind of speed mode. If the value of a bit is '1', it means the corresponding speed mode is negotiable on the port. Otherwise the negotiation for that kind of speed mode is not supported on this port. If there are several negotiable speed modes, all bits for them are '1'. For example, if the speed mode 's10M' and 's1000M' can be negotiable, the value of this object is 0xA0.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.19SpeedModeFlagread-onlycurrent
hpnicfifEthernetAutoSpeed
OBJECT-TYPE
This object indicates which kinds of speed mode are negotiable on this port. Only when a bit of hpnicfifEthernetAutoSpeedMask is '1', the corresponding bit of this object can be set to '1', indicating the corresponding speed mode is negotiable. For example, if the value of hpnicfifEthernetAutoSpeedMask is 0xA0, which indicates speed mode 's10M' and 's1000M' are negotiable, the possible value of this object should be one of the four values (0x00, 0x20, 0x80 and 0xA0). If the value of hpnicfifEthernetSpeed is not 'auto', the value of this object is insignificant and should be ignored. The value length of this object should be as long as that of hpnicfifEthernetAutoSpeedMask.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.20SpeedModeFlagread-writecurrent
hpnicfIsolateGroupMax
OBJECT-TYPE
Max isolate group that this device support, the value is zero means that the device does not support isolate group.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.5Integer32read-onlycurrent
hpnicfGlobalBroadcastMaxPps
OBJECT-TYPE
The global max packets per second. When it is set, the value of BroadcastMaxPps in all ports will be changed to that setting.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.6INTEGER (0..14881000)read-writecurrent
hpnicfGlobalBroadcastMaxRatio
OBJECT-TYPE
The global max-ratio of broadcast from 0 to 100 percent. When it is set, the value of BroadcastMaxRatio in all ports will be changed to that setting.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.7INTEGER (0..100)read-writecurrent
hpnicfBpduTunnelStatus
OBJECT-TYPE
Bpdu tunnel enable status.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.8INTEGER {enabled(1), disabled(2)}read-writecurrent
hpnicfVlanVPNTPIDMode
OBJECT-TYPE
Vlan VPN TPID mode. The value 'port-based' means VLAN VPN TPID value would be set based on port via hpnicfifVlanVPNTPID. In this situation, hpnicfVlanVPNTPID is meaningless and always return 0x8100. The value 'global' means VLAN VPN TPID value should be set globally via hpnicfVlanVPNTPID. In this situation, hpnicfifVlanVPNTPID in hpnicfethernetTable has the same value with hpnicfVlanVPNTPID.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.9INTEGER {port-based(1), global(2)}read-onlycurrent
hpnicfVlanVPNTPID
OBJECT-TYPE
Global Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.10Integer32 (1..65535)read-writecurrent
hpnicfPortIsolateGroupTable
OBJECT-TYPE
Isolate Group attribute table.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.11not-accessiblecurrent
hpnicfPortIsolateGroupEntry
OBJECT-TYPE
The entry of hpnicfPortIsolateGroupTable.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.11.1not-accessiblecurrent
hpnicfPortIsolateGroupIndex
OBJECT-TYPE
Port isolate group identifier. The index of the hpnicfPortIsolateGroupTable. The value ranges from 1 to the limit of isolate group quantity.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.11.1.1Integer32not-accessiblecurrent
hpnicfPortIsolateUplinkIfIndex
OBJECT-TYPE
Index number of the uplink interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.11.1.2InterfaceIndexread-createcurrent
hpnicfPortIsolateGroupRowStatus
OBJECT-TYPE
Current operation status of the row.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.11.1.3RowStatusread-createcurrent
hpnicfPortIsolateGroupDescription
OBJECT-TYPE
Port isolate group description, default value is zero-length string.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.11.1.4DisplayString (SIZE(0..80))read-createcurrent
hpnicfMaxMacLearnRange
OBJECT-TYPE
The maximum number of MAC address that the port supports.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.12Integer32read-onlycurrent
hpnicfifPortProtocolStatTable
OBJECT-TYPE
This table contains objects of port statistics information based on IPv4 and IPv6 protocols.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13not-accessiblecurrent
hpnicfifPortProtocolStatEntry
OBJECT-TYPE
The entry of hpnicfifPortProtocolStatTable.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1not-accessiblecurrent
hpnicfifIPv4InOctets
OBJECT-TYPE
Number of octets based on IPv4 received on the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.1Counter64read-onlycurrent
hpnicfifIPv4InUcastPkts
OBJECT-TYPE
Number of unicast packets based on IPv4 received on the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.2Counter64read-onlycurrent
hpnicfifIPv4InMultiPkts
OBJECT-TYPE
Number of multicast packets based on IPv4 received on the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.3Counter64read-onlycurrent
hpnicfifIPv4InBroadcastPkts
OBJECT-TYPE
Number of broadcast packets based on IPv4 received on the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.4Counter64read-onlycurrent
hpnicfifIPv4InDiscards
OBJECT-TYPE
Number of discard packets based on IPv4 received on the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.5Counter64read-onlycurrent
hpnicfifIPv4InErrors
OBJECT-TYPE
Number of error packets based on IPv4 received on the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.6Counter64read-onlycurrent
hpnicfifIPv4OutOctets
OBJECT-TYPE
Number of octets based on IPv4 transmitted out of the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.7Counter64read-onlycurrent
hpnicfifIPv4OutUcastPkts
OBJECT-TYPE
Number of unicast packets based on IPv4 transmitted out of the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.8Counter64read-onlycurrent
hpnicfifIPv4OutMultiPkts
OBJECT-TYPE
Number of multicast packets based on IPv4 transmitted out of the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.9Counter64read-onlycurrent
hpnicfifIPv4OutBroadcastPkts
OBJECT-TYPE
Number of broadcast packets based on IPv4 transmitted out of the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.10Counter64read-onlycurrent
hpnicfifIPv4OutDiscards
OBJECT-TYPE
Number of discard packets based on IPv4 transmitted out of the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.11Counter64read-onlycurrent
hpnicfifIPv4OutErrors
OBJECT-TYPE
Number of error packets based on IPv4 transmitted out of the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.12Counter64read-onlycurrent
hpnicfifIPv6InOctets
OBJECT-TYPE
Number of octets based on IPv6 received on the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.13Counter64read-onlycurrent
hpnicfifIPv6InUcastPkts
OBJECT-TYPE
Number of unicast packets based on IPv6 received on the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.14Counter64read-onlycurrent
hpnicfifIPv6InMultiPkts
OBJECT-TYPE
Number of multicast packets based on IPv6 received on the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.15Counter64read-onlycurrent
hpnicfifIPv6InAnycastPkts
OBJECT-TYPE
Number of anycast packets based on IPv6 received on the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.16Counter64read-onlycurrent
hpnicfifIPv6InDiscards
OBJECT-TYPE
Number of discard packets based on IPv6 received on the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.17Counter64read-onlycurrent
hpnicfifIPv6InErrors
OBJECT-TYPE
Number of error packets based on IPv6 received on the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.18Counter64read-onlycurrent
hpnicfifIPv6OutOctets
OBJECT-TYPE
Number of octets based on IPv6 transmitted of the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.19Counter64read-onlycurrent
hpnicfifIPv6OutUcastPkts
OBJECT-TYPE
Number of unicast packets based on IPv6 transmitted out of the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.20Counter64read-onlycurrent
hpnicfifIPv6OutMultiPkts
OBJECT-TYPE
Number of multicast packets based on IPv6 transmitted out of the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.21Counter64read-onlycurrent
hpnicfifIPv6OutAnycastPkts
OBJECT-TYPE
Number of anycast packets based on IPv6 transmitted out of the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.22Counter64read-onlycurrent
hpnicfifIPv6OutDiscards
OBJECT-TYPE
Number of discard packets based on IPv6 transmitted out of the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.23Counter64read-onlycurrent
hpnicfifIPv6OutErrors
OBJECT-TYPE
Number of error packets based on IPv6 transmitted out of the interface.
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.24Counter64read-onlycurrent