HPN-ICF-DSP-MIB
- Registered at
- 1.3.6.1.4.1.11.2.14.11.15.2.89
- Last updated
- 2008-01-16 13:00
- Revisions
- 2008-01-16 13:00
- Namespace
- hp
- Source file
HPN-ICF-DSP-MIB- Digest
sha256:88cd30900fdc7ab4c1fc8b21f2ca2a265e5f4b8ebd74923afbefebe9d82548f9
Description
This MIB is to provide the definition of the DSP(Digital Signal Processing) status.
Imports
| From | Symbols |
|---|---|
| ENTITY-MIB | PhysicalIndex |
| HPN-ICF-OID-MIB | hpnicfCommon |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ENTITY-MIB HPN-ICF-DSP-MIB HPN-ICF-OID-MIB IANA-ENTITY-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC UUID-TC-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hpnicfVPMStatusTable OBJECT-TYPE The table contains status parameters of VPM(Voice Process Module) card. | 1.3.6.1.4.1.11.2.14.11.15.2.89.1 | not-accessible | current | |
| hpnicfVPMStatusEntry OBJECT-TYPE The entry of VPM status table. | 1.3.6.1.4.1.11.2.14.11.15.2.89.1.1 | not-accessible | current | |
| hpnicfVPMIndex OBJECT-TYPE The index for this entry. The sequence of VPM card in the chassis is from the top to bottom. | 1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.1 | Integer32 (1..64) | accessible-for-notify | current |
| hpnicfVPMEnPhysicalIndex OBJECT-TYPE The object corresponds to PhysicalIndex in the chassis. | 1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.2 | PhysicalIndex | read-only | current |
| hpnicfVPMState OBJECT-TYPE The object indicates the current state of VPM card being monitored. normal(1) - VPM card in normal condition. warning(2) - VPM card has some problem and need attention. fatal(3) - VPM card is not functional. offLine(4) - VPM card is in off-line maintenance state. | 1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.3 | INTEGER {normal(1), warning(2), fatal(3), offLine(4)} | read-only | current |
| hpnicfVPMResourceUtilization OBJECT-TYPE The object indicates the percentage of current DSP resource utilization of the VPM card. The utilization is a ratio of number of busy DSP resources (for handling calls, transcoding, voice compression,...) to the total available DSP resources. | 1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.4 | Integer32 (0..100) | read-only | current |
| hpnicfVPMHiWaterUtilization OBJECT-TYPE The object indicates the highest percentage of DSP resource utilization of the VPM card that have been occured. | 1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.5 | Integer32 (0..100) | read-only | current |
| hpnicfVPMMaxChannel OBJECT-TYPE The maximum number of channels can be supported in each VPM card. | 1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.6 | Integer32 | read-only | current |
| hpnicfDSPStatusTable OBJECT-TYPE The table contains status parameters of DSP(Digital Signal Processing) card. | 1.3.6.1.4.1.11.2.14.11.15.2.89.2 | not-accessible | current | |
| hpnicfDSPStatusEntry OBJECT-TYPE The entry of DSP status table. | 1.3.6.1.4.1.11.2.14.11.15.2.89.2.1 | not-accessible | current | |
| hpnicfDSPIndex OBJECT-TYPE The index for this entry. DSP is fixed on VPM card or chassis card. The sequence of DSP in the VPM card or chassis card is from right to left. | 1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.1 | Integer32 (1..256) | accessible-for-notify | current |
| hpnicfDSPVPMIndex OBJECT-TYPE The object corresponds to VPMIndex in the chassis. If value of this object is non-zero, it is the index of VPM card.(DSP is in this VPM card.) If value of this object is 0, then the DSP is fixed in the chassis card. | 1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.2 | Integer32 (0..64) | read-only | current |
| hpnicfDSPEnPhysicalIndex OBJECT-TYPE The object corresponds to PhysicalIndex in the chassis. | 1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.3 | PhysicalIndex | read-only | current |
| hpnicfDSPResetTime OBJECT-TYPE The value of sysUpTime from the last DSP reset occurred. | 1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.4 | TimeTicks | read-only | current |
| hpnicfDSPMaxChannel OBJECT-TYPE The maximum number of channels can be supported in each DSP. The value is chosen in an implementation-dependent manner by the DSP functionality. | 1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.5 | Integer32 | read-only | current |
| hpnicfDSPState OBJECT-TYPE The object indicates the current state of DSP being monitored. normal(1) - DSP in normal condition. fatal(3) - DSP is not functional. offLine(4) - DSP is in off-line maintenance state. | 1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.6 | INTEGER {normal(1), fatal(3), offLine(4)} | read-only | current |
| hpnicfDSPInUseChannel OBJECT-TYPE The number of channels that are reserved for serving calls. The value is incremented when the DSP channel is reserved for call setup and is decremented after the DSP channel is free due to call disconnection. | 1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.7 | Integer32 | read-only | current |
| hpnicfDSPTrap OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.89.3 | |||
| hpnicfDSPTrapPrex OBJECT-IDENTITY | 1.3.6.1.4.1.11.2.14.11.15.2.89.3.0 |
Notifications
| Name | OID | Status |
|---|---|---|
| hpnicfVPMStateChange NOTIFICATION-TYPE This trap is sent when VPM state changes. | 1.3.6.1.4.1.11.2.14.11.15.2.89.3.0.1 | current |
| hpnicfDSPStateChange NOTIFICATION-TYPE This trap is sent when DSP state changes. | 1.3.6.1.4.1.11.2.14.11.15.2.89.3.0.2 | current |