MIBs Depot

HP-SN-SWITCH-GROUP-MIB

Registered at
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3
1.3.6.1.4.1.11.2.3.7.11.12.1.3.4
1.3.6.1.4.1.11.2.3.7.11.12.1.3.5
1.3.6.1.4.1.11.2.3.7.11.12.1.3.6
1.3.6.1.4.1.11.2.3.7.11.12.1.3.7
1.3.6.1.4.1.11.2.3.7.11.12.1.3.8
1.3.6.1.4.1.11.2.3.7.11.12.1.3.9
1.3.6.1.4.1.11.2.3.7.11.12.1.3.10
1.3.6.1.4.1.11.2.3.7.11.12.1.3.11
1.3.6.1.4.1.11.2.3.7.11.12.1.3.12
1.3.6.1.4.1.11.2.3.7.11.12.1.3.13
1.3.6.1.4.1.11.2.3.7.11.12.1.3.14
1.3.6.1.4.1.11.2.3.7.11.12.1.3.15
1.3.6.1.4.1.11.2.3.7.11.12.1.3.16
1.3.6.1.4.1.11.2.3.7.11.12.1.3.17
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18
1.3.6.1.4.1.11.2.3.7.11.12.1.3.19
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20
1.3.6.1.4.1.11.2.3.7.11.12.1.3.21
Namespace
hp
Source file
HP-SN-SWITCH-GROUP-MIB
Digest
sha256:8d7933e99e0fd1ba06ed27e185c2338098827a814e755d69f8ba5e3ee61c206c

Imports

FromSymbols
HP-SN-ROOT-MIBsnSwitch
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Gauge32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

4 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HP-SN-ROOT-MIB
HP-SN-SWITCH-GROUP-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Under this module's arcs

Where the registration tree carries on below this module.

ArcNameModule
1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1snPortCARsHP-CAR-MIB
1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1snVLanCARsHP-VLAN-CAR-MIB
1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1snVsrpGlobalHP-SN-VSRP-MIB
1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2snVsrpIfIntfHP-SN-VSRP-MIB
1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3snVsrpVirRtrHP-SN-VSRP-MIB

Textual conventions

NameOIDSyntaxAccessStatus
BridgeId
type
DisplayString
type
InterfaceId
type
MacAddress
type
PhysAddress
type
PortMask
type
Timeout
type

Objects

NameOIDSyntaxAccessStatus
snSwInfo
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1
snSwGroupOperMode
OBJECT-TYPE
noVLan(1) represents all switch ports with no virtual LAN by port (no Port VLAN), and with no tag assigned. vlanByPort(2) represents all switch ports with Basic VLAN (layer2 Switch).
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.1INTEGER {noVLan(1), vlanByPort(2)}read-writemandatory
snSwGroupIpL3SwMode
OBJECT-TYPE
The Switch Group is configured with the Layer3 IP Switch mode either enabled or disabled and the default is disabled mode. enabled(1)...........activate Layer3 IP Switch disabled(0)..........disable Layer3 IP Switch
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.2INTEGER {disabled(0), enabled(1)}read-writemandatory
snSwGroupIpMcastMode
OBJECT-TYPE
The Switch Group is configured with the IP Multicast pruning mode either enabled or disabled and the default is disabled mode. enabled(1)...........activate IP Multicast pruning disabled(0)..........no IP Multicast pruning
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.3INTEGER {disabled(0), enabled(1)}read-writemandatory
snSwGroupDefaultCfgMode
OBJECT-TYPE
The Switch Group is configured with the Default configuration. If the default configuration gets overwritten, the state will change to non-default. default(1)...........default configuration nonDefault(2)..........non default configuration
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.4INTEGER {default(1), nonDefault(2)}read-writemandatory
snSwGroupSwitchAgeTime
OBJECT-TYPE
The Switch Age time is 180sec by default. The configured range is 10 to 10,000sec. The time represents the time span to age out an MAC Address entry.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.5INTEGERread-writemandatory
snVLanGroupVlanCurEntry
OBJECT-TYPE
The current total entry number of VLANs are configured.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.6INTEGERread-onlymandatory
snVLanGroupSetAllVLan
OBJECT-TYPE
The value of this object is the VLanIndex of a particalur entry in snVLanByPortTable (snVLanByPortVLanIndex). All the attributes of that row of table except PortMask will be used to set the same attributes for the entire VLan group. VLanId and PortMask must be set for that particular entry prior to setting this object. Switch software will base on that VLAN information to set the entire VLAN. Note: All the intended attributes of the given row of the table (given VLAN) must be set prior setting this object. When this object is set, Set-All-VLAN action will take place simultaneously. The previous setting will be overwritten by the new one.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.7INTEGERread-writemandatory
snSwPortSetAll
OBJECT-TYPE
The value of this object is the index number of the snSwPortInfoTable (snSwPortInfoPortIndex). snSwPortInfoMonitorMode, snSwPortInfoTagMode, snSwPortInfoChnMode, snSwPortInfoSpeed, snSwPortInfoAdminStatus are all the read-write attributes of that row of table. They will be used to set the same attributes for all the ports in the system. Note: prior setting this object, all the intended attributes of the given row of the table must be set. Otherwise, the current data of the row will be used to set the entire port-table. The previous setting will be overwritten by the new one.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.8INTEGERread-writemandatory
snFdbTableCurEntry
OBJECT-TYPE
The current total entry number of FDB are configured.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.9INTEGERread-onlymandatory
snFdbTableStationFlush
OBJECT-TYPE
The following values of the flush state can only be read: normal(1)... normal state error(2)... operation failed flushing(4)... in process The following value can be written: flush(3).....do flush The agent will return a response even before the flush is done. And the read value will be flushing until flush is done. And the flush request will be rejected until error or normal.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.10INTEGER {normal(1), error(2), flush(3), flushing(4)}read-writemandatory
snPortStpSetAll
OBJECT-TYPE
The value of this object is 1 which means invoking Port STP Set-all command. The snPortStpPriority, snPortStpPathCost, the read-write STP related attributes of the first row of table will be used to set the same attributes for all the ports in the system. Note: prior setting this object, all the intended attributes of the given row of the table must be set. Otherwise, the current data of the row will be used to set the entire port-table. The previous setting will be overwritten by the new one.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.11INTEGERread-writemandatory
snSwProbePortNum
OBJECT-TYPE
A chassis switch probe port is operated as a traffic analyzer port and only one port can be assigned in the chassis. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number. A stackable switch is only assigned with one probe port as a traffic analyzer.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.12INTEGERread-writemandatory
snSw8021qTagMode
OBJECT-TYPE
The Switch Group is configured with the IEEE802.1q Tagging mode either enabled or disabled and the default is disabled mode. enabled(1)...........activate IEEE802.1q Tagging mode. disabled(0)..........no IEEE802.1q Tagging.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.13INTEGER {disabled(0), enabled(1)}read-writemandatory
snSwGlobalStpMode
OBJECT-TYPE
Spanning Tree System Global Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. enabled(1)...........activate Spanning Tree disabled(0)..........no Spanning Tree
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.14INTEGER {disabled(0), enabled(1)}read-writemandatory
snSwIpMcastQuerierMode
OBJECT-TYPE
The IP Multicast pruning mode is configured either Non-Querier or Querier mode and the default is querier mode. querier(1)...........when prunning traffic locally within the VLAN. nonQuerier(2)........when running with a multicast capable router in the network.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.15INTEGER {querier(1), nonQuerier(2)}read-writemandatory
snSwViolatorPortNumber
OBJECT-TYPE
The port number of the switch or router that received a violator packet. It is included in the locked address violation trap. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only).
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.17INTEGERread-onlymandatory
snSwViolatorMacAddress
OBJECT-TYPE
The source address of the violator packet received by the switch or router. It is included in the locked address violation trap.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.18MacAddressread-onlymandatory
snVLanGroupVlanMaxEntry
OBJECT-TYPE
The maximum number of VLAN entries are allowed to configure.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.19INTEGERread-writemandatory
snSwEosBufferSize
OBJECT-TYPE
A specific buffer size for all the different EOS buffers.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.20INTEGERread-onlymandatory
snVLanByPortEntrySize
OBJECT-TYPE
The size of each VLAN table entry.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.21INTEGERread-onlymandatory
snSwPortEntrySize
OBJECT-TYPE
The size of each port table entry.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.22INTEGERread-onlymandatory
snFdbStationEntrySize
OBJECT-TYPE
The size of each Fdb station table entry.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.23INTEGERread-onlymandatory
snPortStpEntrySize
OBJECT-TYPE
The size of each port stp table entry.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.24INTEGERread-onlymandatory
snSwEnableBridgeNewRootTrap
OBJECT-TYPE
Indicates whether the SNMP agent process is permitted to generate bridge new root traps.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.25INTEGER {disabled(0), enabled(1)}read-writemandatory
snSwEnableBridgeTopoChangeTrap
OBJECT-TYPE
Indicates whether the SNMP agent process is permitted to generate bridge topology change traps.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.26INTEGER {disabled(0), enabled(1)}read-writemandatory
snSwEnableLockedAddrViolationTrap
OBJECT-TYPE
Indicates whether the SNMP agent process is permitted to generate locked address violation traps.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.27INTEGER {disabled(0), enabled(1)}read-writemandatory
snSwIpxL3SwMode
OBJECT-TYPE
The Switch Group is configured with the Layer3 IPX Switch mode either enabled or disabled and the default is disabled mode. enabled(1)...........activate Layer3 Switch disabled(0)..........disable Layer3 Switch
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.28INTEGER {disabled(0), enabled(1)}read-writemandatory
snVLanByIpSubnetMaxSubnets
OBJECT-TYPE
The maximum number of subnets for each IP VLAN.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.29INTEGERread-onlymandatory
snVLanByIpxNetMaxNetworks
OBJECT-TYPE
The maximum number of networks for each IPX VLAN.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.30INTEGERread-onlymandatory
snSwProtocolVLanMode
OBJECT-TYPE
disabled(0) - represents system with Protocol VLAN disabled. enabled(1) - represents system with Protocol VLAN enabled (Layer3 VLAN).
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.31INTEGER {disabled(0), enabled(1)}read-writemandatory
snMacStationVLanId
OBJECT-TYPE
This MAC Station VLAN ID index to the standard Forwarding Database for Transparent Bridge Table. (dot1dTpFdbTable). Since the dot1dTpFdbTable index is the MAC Address assigned to one of the ports in the bridge(VLAN) and each MAC address can be re-assigned to a different ports belonging to different bridges(VLANs), the snMacStationVLanId can be used by users to specify which bridge(VLAN) MAC Station information of the dot1dTpFdbTable users want to retrieve. If users do not specify the VLan ID in this MIB, the default VLAN (bridge) ID will be used when dot1dTpFdbTable is retrieved.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.32INTEGER (1..4095)read-writemandatory
snSwClearCounters
OBJECT-TYPE
valid(0) - a SNMP-GET of this mib shows that it is valid command to use. clear(1) - represents clear counter command of the following counters: Dot3, MIB2, IP and IPX counters for all ports.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.33INTEGER {valid(0), clear(1)}read-writemandatory
snSw8021qTagType
OBJECT-TYPE
The IEEE802.1q tag type embedded in the length/type field of an Ethernet packet. It specifies that the 2 octets after the length/type field in an Ethernet packet is the tag value.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.34INTEGERread-writemandatory
snSwBroadcastLimit
OBJECT-TYPE
Limit the number of broadcast packets to forward out of the switch ports. This object specifies the number of broadcast packets per second. Setting a value of 0 to this object disables the limitation check.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.35INTEGERread-writemandatory
snSwMaxMacFilterPerSystem
OBJECT-TYPE
The maximum number of MAC Filters per system in the MAC Filter table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.36INTEGERread-onlymandatory
snSwMaxMacFilterPerPort
OBJECT-TYPE
The maximum number of MAC Filters per port in the Port MAC Access Filter table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.37INTEGERread-onlymandatory
snSwDefaultVLanId
OBJECT-TYPE
The VLAN ID of the DEFAULT PORT-VLAN.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.38INTEGER (1..4095)read-writemandatory
snSwGlobalAutoNegotiate
OBJECT-TYPE
This feature only applies to Gigabit Ethernet ports. If set to disable(0), all Gigabit Ethernet ports will be put to non- negotiation mode. If set to enable(1), all Gigabit Ethernet ports will start auto-negotiation indefinitely until succeed. If set to negFullAuto(2), all Gigabit Ethernet ports will start with auto-negotiation, if the negotiation failed, then they will automatically switch to non-negotiation mode. Stackable products (except TurboIron 8) Gigabit Ethernet ports do not support negFullAuto(2). If the snSwPortInfoAutoNegotiate value of a port was not set to global, this global value does not apply to the negotiation mode of that port.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.39INTEGER {disabled(0), enabled(1), negFullAuto(2), other(3)}read-writemandatory
snSwQosMechanism
OBJECT-TYPE
Indicates whether the qos mechanism is strict or weighted.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.40INTEGER {strict(0), weighted(1)}read-writemandatory
snSwSingleStpMode
OBJECT-TYPE
Single Spanning Tree System Mode in the Switch Group can be set either enabled or disabled and the default is disabled mode. enabled(1)...........activate Single Spanning Tree disabled(0)..........no Single Spanning Tree
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.41INTEGER {disabled(0), enabled(1)}read-writemandatory
snSwFastStpMode
OBJECT-TYPE
Fast Spanning Tree System Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. enabled(1)...........activate Fast Spanning Tree disabled(0)..........no Fast Spanning Tree
1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.42INTEGER {disabled(0), enabled(1)}read-writemandatory
snVLanInfo
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2
snVLanByPortTable
OBJECT-TYPE
If snSwGroupOperMode is configured as basic mode which is VLAN by Port, Layer2 switching, then this table is valid. Each VLAN switch port could have a number of VLAN IDs.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1not-accessibledeprecated
snVLanByPortEntry
OBJECT-TYPE
An entry in the VLAN By Port Information table. snVLanByPortVLanIndex = 1 and with snVLanByPortVLanId = 1 together implies all attributes applying to the Global switch group i.e. noVLan. A SNMP SET PDU for a row of the snVLanByPortTable requires the entired sequence of the MIB Objects in each snVLanByPortEntry stored in one PDU. Otherwise, GENERR return-value will be returned.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1not-accessibledeprecated
snVLanByPortVLanIndex
OBJECT-TYPE
The VLAN ID index must not be greater than the snVLanGroupVlanMaxEntry. Each VLAN Identifier can have a membership of multiple ports.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.1INTEGER (1..4095)read-onlydeprecated
snVLanByPortVLanId
OBJECT-TYPE
The VLAN ID index to the VLAN By Port Info Table. Each VLAN Identifier can have a membership of multiple ports.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.2INTEGER (1..4095)read-writedeprecated
snVLanByPortPortMask
OBJECT-TYPE
The Standand-alone switch VLAN port membership. (It was obsoleted for Chassis Product)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.3PortMaskread-writedeprecated
snVLanByPortQos
OBJECT-TYPE
The Stand alone stackable switch VLAN Priority values are: low(0) -- low prority high(1) -- high prority. The BigIron switch VLAN Priority values are: level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.4INTEGER {level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)}read-writedeprecated
snVLanByPortStpMode
OBJECT-TYPE
Spanning Tree Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. enabled(1)...........activate Spanning Tree disabled(0)..........no Spanning Tree
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.5INTEGER {disabled(0), enabled(1)}read-writedeprecated
snVLanByPortStpPriority
OBJECT-TYPE
dot1dStpPriority : The value of the write-able portion of the Stp ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of the base bridge address - dot1dBaseBridgeAddress.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.6INTEGER (1..65535)read-writedeprecated
snVLanByPortStpGroupMaxAge
OBJECT-TYPE
dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB). The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.7INTEGER (6..40)read-writedeprecated
snVLanByPortStpGroupHelloTime
OBJECT-TYPE
dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB). The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.8INTEGER (1..10)read-writedeprecated
snVLanByPortStpGroupForwardDelay
OBJECT-TYPE
dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB). The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.9INTEGER (2..30)read-writedeprecated
snVLanByPortRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.10INTEGER {other(1), valid(2), delete(3), create(4), modify(5)}read-writedeprecated
snVLanByPortOperState
OBJECT-TYPE
By default, this mode is set to notActivated(0). notActivated(0)...the VLAN entry is not activated and not in running mode. activated(1)......the VLAN entry is activated and in running mode
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.11INTEGER {notActivated(0), activated(1)}read-onlydeprecated
snVLanByPortBaseNumPorts
OBJECT-TYPE
The number of ports controlled by this bridging entity.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.12INTEGERread-onlydeprecated
snVLanByPortBaseType
OBJECT-TYPE
Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the port table for the given type.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.13INTEGER {unknown(1), transparent-only(2), sourceroute-only(3), srt(4)}read-onlydeprecated
snVLanByPortStpProtocolSpecification
OBJECT-TYPE
An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.14INTEGER {unknown(1), decLb100(2), ieee8021d(3)}read-onlydeprecated
snVLanByPortStpMaxAge
OBJECT-TYPE
dot1dStpMaxAge: From RFC1493(Bridge MIB). The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.15Timeoutread-onlydeprecated
snVLanByPortStpHelloTime
OBJECT-TYPE
dot1dStpHelloTime: From RFC1493(Bridge MIB). The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.16Timeoutread-onlydeprecated
snVLanByPortStpHoldTime
OBJECT-TYPE
dot1dStpHoldTime: From RFC1493(Bridge MIB). This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.17INTEGERread-onlydeprecated
snVLanByPortStpForwardDelay
OBJECT-TYPE
dot1dStpForwardDelay: From RFC1493(Bridge MIB). This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.18Timeoutread-onlydeprecated
snVLanByPortStpTimeSinceTopologyChange
OBJECT-TYPE
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.19TimeTicksread-onlydeprecated
snVLanByPortStpTopChanges
OBJECT-TYPE
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.20Counterread-onlydeprecated
snVLanByPortStpRootCost
OBJECT-TYPE
dot1dStpRootCost: From RFC1493(Bridge MIB). The cost of the path to the root as seen from this bridge.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.21INTEGERread-onlydeprecated
snVLanByPortStpRootPort
OBJECT-TYPE
dot1dStpRootPort: From RFC1493(Bridge MIB). The port number of the port which offers the lowest cost path from this bridge to the root bridge.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.22INTEGERread-onlydeprecated
snVLanByPortStpDesignatedRoot
OBJECT-TYPE
dot1dStpDesignatedRoot: From RFC1493(Bridge MIB). The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.23BridgeIdread-onlydeprecated
snVLanByPortBaseBridgeAddress
OBJECT-TYPE
The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with dot1dStpPriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.24MacAddressread-onlydeprecated
snVLanByPortVLanName
OBJECT-TYPE
VLAN Community Name string.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.25DisplayString (SIZE(0..32))read-writedeprecated
snVLanByPortRouterIntf
OBJECT-TYPE
Optional: A virtual interface for router to the VLAN -- applied to router only. If a SNMP-Get value is zero, that means this object was not configured.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.26INTEGER (1..60)read-writedeprecated
snVLanByPortChassisPortMask
OBJECT-TYPE
The Chassis VLAN switch port membership. (It was obsoleted after release 07100, replaced by snVLanByPortPortList)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.27OCTET STRING (SIZE(32))read-writedeprecated
snVLanByPortPortList
OBJECT-TYPE
A list of port indices which are the port membership of a VLAN By Port. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.28OCTET STRINGread-writedeprecated
snVLanByProtocolTable
OBJECT-TYPE
.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2not-accessiblemandatory
snVLanByProtocolEntry
OBJECT-TYPE
An entry in the VLAN By Protocol Configuration table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1not-accessiblemandatory
snVLanByProtocolVLanId
OBJECT-TYPE
The VLAN ID index to both of the VLAN By Port Info Table and this table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.1INTEGER (1..4095)read-onlymandatory
snVLanByProtocolIndex
OBJECT-TYPE
The following IP/IPX protocol VLAN types are operated in Layer3 VLAN such as : ip(1), ipx(2), ipv6(7) The following are operated in Layer2 bridging such as: appleTalk(3), decNet(4), netBios(5), others(6) -- other protocols which are defined here.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.2INTEGER {ip(1), ipx(2), appleTalk(3), decNet(4), netBios(5), others(6), ipv6(7)}read-onlymandatory
snVLanByProtocolDynamic
OBJECT-TYPE
disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.3INTEGER {disabled(0), enabled(1)}read-writemandatory
snVLanByProtocolStaticMask
OBJECT-TYPE
The Standand-alone switch Protocol VLAN port membership applied in static mode. (It was obsoleted for Chassis Product)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.4PortMaskread-writedeprecated
snVLanByProtocolExcludeMask
OBJECT-TYPE
The Standand-alone switch Protocol VLAN port membership applied in exclusive mode. (It was obsoleted for Chassis Product)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.5PortMaskread-writedeprecated
snVLanByProtocolRouterIntf
OBJECT-TYPE
Optional: A virtual interface for router to the VLAN -- applied to router only. If a SNMP-Get value is zero, that means this object was not configured.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.6INTEGER (1..60)read-writemandatory
snVLanByProtocolRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.7INTEGER {other(1), valid(2), delete(3), create(4), modify(5)}read-writemandatory
snVLanByProtocolDynamicMask
OBJECT-TYPE
The Standand-alone switch Protocol VLAN active port membership. (It was obsoleted for Chassis Product)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.8PortMaskread-onlydeprecated
snVLanByProtocolChassisStaticMask
OBJECT-TYPE
The Chassis Protocol VLAN port membership applied in static mode. (It was obsoleted after release 07100, replaced by snVLanByProtocolStaticPortList)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.9OCTET STRING (SIZE(32))read-writedeprecated
snVLanByProtocolChassisExcludeMask
OBJECT-TYPE
The Chassis Protocol VLAN port membership applied in exclusive mode. (It was obsoleted after release 07100, replaced by snVLanByProtocolExcludePortList)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.10OCTET STRING (SIZE(32))read-writedeprecated
snVLanByProtocolChassisDynamicMask
OBJECT-TYPE
The Chassis Protocol VLAN active port membership. (It was obsoleted after release 07100, replaced by snVLanByProtocolDynamicPortList)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.11OCTET STRING (SIZE(32))read-onlydeprecated
snVLanByProtocolVLanName
OBJECT-TYPE
VLAN Community Name string.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.12DisplayString (SIZE(0..32))read-writemandatory
snVLanByProtocolStaticPortList
OBJECT-TYPE
A list of port indices which are the configured port membership of the Protocol VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.13OCTET STRINGread-writemandatory
snVLanByProtocolExcludePortList
OBJECT-TYPE
A list of port indices which are the excluded from port membership of the Protocol VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.14OCTET STRINGread-writemandatory
snVLanByProtocolDynamicPortList
OBJECT-TYPE
A list of port indices which are dynamically joining the port membership of the Protocol VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.15OCTET STRINGread-onlymandatory
snVLanByIpSubnetTable
OBJECT-TYPE
An entry of the VLAN By IPX Network Number Table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3not-accessiblemandatory
snVLanByIpSubnetEntry
OBJECT-TYPE
An entry in the VLAN By IP Subnet Configuration table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1not-accessiblemandatory
snVLanByIpSubnetVLanId
OBJECT-TYPE
The VLAN ID index to both of the VLAN By Port Info Table and this table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.1INTEGER (1..4095)read-onlymandatory
snVLanByIpSubnetIpAddress
OBJECT-TYPE
Subnet IP address.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.2IpAddressread-onlymandatory
snVLanByIpSubnetSubnetMask
OBJECT-TYPE
Subnet mask associated with the Subnet IP address.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.3IpAddressread-onlymandatory
snVLanByIpSubnetDynamic
OBJECT-TYPE
disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.4INTEGER {disabled(0), enabled(1)}read-writemandatory
snVLanByIpSubnetStaticMask
OBJECT-TYPE
The Standand-alone switch VLAN By Subnet port membership applied in static mode. (It was obsoleted for Chassis Product)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.5PortMaskread-writedeprecated
snVLanByIpSubnetExcludeMask
OBJECT-TYPE
The Standand-alone switch VLAN By Subnet port membership applied in exclusive mode. (It was obsoleted for Chassis Product)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.6PortMaskread-writedeprecated
snVLanByIpSubnetRouterIntf
OBJECT-TYPE
Optional: A virtual interface for router to the VLAN -- applied to router only. If a SNMP-Get value is zero, that means this object was not configured.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.7INTEGER (1..60)read-writemandatory
snVLanByIpSubnetRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.8INTEGER {other(1), valid(2), delete(3), create(4), modify(5)}read-writemandatory
snVLanByIpSubnetDynamicMask
OBJECT-TYPE
The Standand-alone switch VLAN By Subnet active port membership. (It was obsoleted for Chassis Product)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.9PortMaskread-onlydeprecated
snVLanByIpSubnetChassisStaticMask
OBJECT-TYPE
The Chassis VLAN By Subnet port membership applied in static mode. (It was obsoleted after release 07100, replaced by snVLanByIpSubnetStaticPortList)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.10OCTET STRING (SIZE(32))read-writedeprecated
snVLanByIpSubnetChassisExcludeMask
OBJECT-TYPE
The Chassis VLAN By Subnet port membership applied in exclusive mode. (It was obsoleted after release 07100, replaced by snVLanByIpSubnetExcludePortList)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.11OCTET STRING (SIZE(32))read-writedeprecated
snVLanByIpSubnetChassisDynamicMask
OBJECT-TYPE
The Chassis VLAN By Subnet active port membership. (It was obsoleted after release 07100, replaced by snVLanByIpSubnetDynamicPortList)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.12OCTET STRING (SIZE(32))read-onlydeprecated
snVLanByIpSubnetVLanName
OBJECT-TYPE
VLAN Community Name string.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.13DisplayString (SIZE(0..32))read-writemandatory
snVLanByIpSubnetStaticPortList
OBJECT-TYPE
A list of port indices which are the configured port membership of the VLAN By IP Subnet. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.14OCTET STRINGread-writemandatory
snVLanByIpSubnetExcludePortList
OBJECT-TYPE
A list of port indices which are the excluded from port membership of the VLAN By IP Subnet. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.15OCTET STRINGread-writemandatory
snVLanByIpSubnetDynamicPortList
OBJECT-TYPE
A list of port indices which are dynamically joining the port membership of the VLAN By IP Subnet. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.16OCTET STRINGread-onlymandatory
snVLanByIpxNetTable
OBJECT-TYPE
An entry of the VLAN By IPX Network Number Table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4not-accessiblemandatory
snVLanByIpxNetEntry
OBJECT-TYPE
An entry in the VLAN By Ipx Network Number Configuration table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1not-accessiblemandatory
snVLanByIpxNetVLanId
OBJECT-TYPE
The VLAN ID index to both of the VLAN By Port Info Table and this table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.1INTEGER (1..4095)read-onlymandatory
snVLanByIpxNetNetworkNum
OBJECT-TYPE
IPX Network Number.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.2OCTET STRING (SIZE(4))read-onlymandatory
snVLanByIpxNetFrameType
OBJECT-TYPE
The following IPX Frame types are operated in Layer3 VLAN such as : ipxEthernet8022(1), ipxEthernet8023(2), ipxEthernetII(3), ipxEthernetSnap(4). choose notApplicable(0) for other protocols. Note: Each Network Number can be assigned with one unique Frame type; Otherwise, a SNMP-SET error will be returned.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.3INTEGER {notApplicable(0), ipxEthernet8022(1), ipxEthernet8023(2), ipxEthernetII(3), ipxEthernetSnap(4)}read-onlymandatory
snVLanByIpxNetDynamic
OBJECT-TYPE
disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.4INTEGER {disabled(0), enabled(1)}read-writemandatory
snVLanByIpxNetStaticMask
OBJECT-TYPE
The VLAN By IPX network port membership applied in static mode. (It was obsoleted for Chassis Product)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.5PortMaskread-writedeprecated
snVLanByIpxNetExcludeMask
OBJECT-TYPE
The VLAN By IPX network port membership applied in exclusive mode. (It was obsoleted for Chassis Product)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.6PortMaskread-writedeprecated
snVLanByIpxNetRouterIntf
OBJECT-TYPE
Optional: A virtual interface for router to the VLAN -- applied to router only. If a SNMP-Get value is zero, that means this object was not configured.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.7INTEGER (1..60)read-writemandatory
snVLanByIpxNetRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.8INTEGER {other(1), valid(2), delete(3), create(4), modify(5)}read-writemandatory
snVLanByIpxNetDynamicMask
OBJECT-TYPE
The VLAN By IPX network active port membership. (It was obsoleted for Chassis Product)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.9PortMaskread-onlydeprecated
snVLanByIpxNetChassisStaticMask
OBJECT-TYPE
The Chassis VLAN By IPX network port membership applied in static mode. (It was obsoleted after release 07100, replaced by snVLanByIpxNetStaticPortList)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.10OCTET STRING (SIZE(32))read-writedeprecated
snVLanByIpxNetChassisExcludeMask
OBJECT-TYPE
The Chassis VLAN By IPX network port membership applied in exclusive mode. (It was obsoleted after release 07100, replaced by snVLanByIpxNetExcludePortList)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.11OCTET STRING (SIZE(32))read-writedeprecated
snVLanByIpxNetChassisDynamicMask
OBJECT-TYPE
The Chassis VLAN By IPX network active port membership. (It was obsoleted after release 07100, replaced by snVLanByIpxNetDynamicPortList)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.12OCTET STRING (SIZE(32))read-onlydeprecated
snVLanByIpxNetVLanName
OBJECT-TYPE
VLAN Community Name string.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.13DisplayString (SIZE(0..32))read-writemandatory
snVLanByIpxNetStaticPortList
OBJECT-TYPE
A list of port indices which are the configured port membership of the VLAN By IPX network. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.14OCTET STRINGread-writemandatory
snVLanByIpxNetExcludePortList
OBJECT-TYPE
A list of port indices which are the excluded from port membership of the VLAN By IPX network. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.15OCTET STRINGread-writemandatory
snVLanByIpxNetDynamicPortList
OBJECT-TYPE
A list of port indices which are dynamically joining the port membership of the VLAN By IPX network. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.16OCTET STRINGread-onlymandatory
snVLanByATCableTable
OBJECT-TYPE
A Table Of VLAN By AppleTalk Network Number.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5not-accessiblemandatory
snVLanByATCableEntry
OBJECT-TYPE
An entry of the AppleTalk Cable VLAN table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1not-accessiblemandatory
snVLanByATCableVLanId
OBJECT-TYPE
The VLAN ID of a PORT VLAN of which the AppleTalk Cable VLAN was attaching to.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.1INTEGER (1..4095)read-onlymandatory
snVLanByATCableIndex
OBJECT-TYPE
AppleTalk Cable VLAN index number.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.2INTEGERread-onlymandatory
snVLanByATCableRouterIntf
OBJECT-TYPE
A virtual router interface to the AppleTalk Cable VLAN, only router products accept the SNMP-SET operation. The value zero indicates that virtual router interface was not configured.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.3INTEGER (0..60)read-writemandatory
snVLanByATCableRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.4INTEGER {other(1), valid(2), delete(3), create(4), modify(5)}read-writemandatory
snVLanByATCableChassisStaticMask
OBJECT-TYPE
A list of ports which are statically configured to become port members of a VLAN. (It was obsoleted after release 07100, replaced by snVLanByATCableStaticPortList)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.5OCTET STRING (SIZE(32))read-writedeprecated
snVLanByATCableVLanName
OBJECT-TYPE
VLAN Name string.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.6DisplayString (SIZE(0..32))read-writemandatory
snVLanByATCableStaticPortList
OBJECT-TYPE
A list of port indices which are the configured port membership of the AppleTalk Cable VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.7OCTET STRINGread-writemandatory
snVLanByPortMemberTable
OBJECT-TYPE
Port VLAN (Layer 2 VLAN) port membership table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.6not-accessiblemandatory
snVLanByPortMemberEntry
OBJECT-TYPE
An entry of the port VLAN membership table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.6.1not-accessiblemandatory
snVLanByPortMemberVLanId
OBJECT-TYPE
The VLAN identifier (VLAN ID).
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.6.1.1INTEGER (1..4095)read-onlymandatory
snVLanByPortMemberPortId
OBJECT-TYPE
The ifIndex which is a member of the port VLAN.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.6.1.2INTEGERread-onlymandatory
snVLanByPortMemberRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.6.1.3INTEGER {other(1), valid(2), delete(3), create(4)}read-writemandatory
snVLanByPortCfgTable
OBJECT-TYPE
Port VLAN (Layer 2 VLAN) configuration table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7not-accessiblemandatory
snVLanByPortCfgEntry
OBJECT-TYPE
An entry of the port VLAN configuration table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1not-accessiblemandatory
snVLanByPortCfgVLanId
OBJECT-TYPE
The VLAN identifier (VLAN ID).
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.1INTEGER (1..4095)read-onlymandatory
snVLanByPortCfgQos
OBJECT-TYPE
The Stand alone stackable switch VLAN Priority values are: level0(0) -- low prority level1(1) -- high prority. The BigIron switch VLAN Priority values are: level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.2INTEGER {level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)}read-writemandatory
snVLanByPortCfgStpMode
OBJECT-TYPE
Spanning Tree Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. enabled(1)...........activate Spanning Tree disabled(0)..........no Spanning Tree
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.3INTEGER {disabled(0), enabled(1)}read-writemandatory
snVLanByPortCfgStpPriority
OBJECT-TYPE
dot1dStpPriority : The value of the write-able portion of the Stp ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of the base bridge address - dot1dBaseBridgeAddress.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.4INTEGER (1..65535)read-writemandatory
snVLanByPortCfgStpGroupMaxAge
OBJECT-TYPE
dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB). The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.5INTEGER (6..40)read-writemandatory
snVLanByPortCfgStpGroupHelloTime
OBJECT-TYPE
dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB). The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.6INTEGER (1..10)read-writemandatory
snVLanByPortCfgStpGroupForwardDelay
OBJECT-TYPE
dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB). The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.7INTEGER (2..30)read-writemandatory
snVLanByPortCfgBaseNumPorts
OBJECT-TYPE
The number of ports controlled by this bridging entity.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.8INTEGERread-onlymandatory
snVLanByPortCfgBaseType
OBJECT-TYPE
Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the port table for the given type.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.9INTEGER {unknown(1), transparent-only(2), sourceroute-only(3), srt(4)}read-onlymandatory
snVLanByPortCfgStpProtocolSpecification
OBJECT-TYPE
An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.10INTEGER {unknown(1), decLb100(2), ieee8021d(3)}read-onlymandatory
snVLanByPortCfgStpMaxAge
OBJECT-TYPE
dot1dStpMaxAge: From RFC1493(Bridge MIB). The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.11Timeoutread-onlymandatory
snVLanByPortCfgStpHelloTime
OBJECT-TYPE
dot1dStpHelloTime: From RFC1493(Bridge MIB). The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.12Timeoutread-onlymandatory
snVLanByPortCfgStpHoldTime
OBJECT-TYPE
dot1dStpHoldTime: From RFC1493(Bridge MIB). This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.13INTEGERread-onlymandatory
snVLanByPortCfgStpForwardDelay
OBJECT-TYPE
dot1dStpForwardDelay: From RFC1493(Bridge MIB). This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.14Timeoutread-onlymandatory
snVLanByPortCfgStpTimeSinceTopologyChange
OBJECT-TYPE
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.15TimeTicksread-onlymandatory
snVLanByPortCfgStpTopChanges
OBJECT-TYPE
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.16Counterread-onlymandatory
snVLanByPortCfgStpRootCost
OBJECT-TYPE
dot1dStpRootCost: From RFC1493(Bridge MIB). The cost of the path to the root as seen from this bridge.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.17INTEGERread-onlymandatory
snVLanByPortCfgStpRootPort
OBJECT-TYPE
dot1dStpRootPort: From RFC1493(Bridge MIB). The port number of the port which offers the lowest cost path from this bridge to the root bridge.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.18INTEGERread-onlymandatory
snVLanByPortCfgStpDesignatedRoot
OBJECT-TYPE
dot1dStpDesignatedRoot: From RFC1493(Bridge MIB). The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.19BridgeIdread-onlymandatory
snVLanByPortCfgBaseBridgeAddress
OBJECT-TYPE
The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with dot1dStpPriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.20MacAddressread-onlymandatory
snVLanByPortCfgVLanName
OBJECT-TYPE
VLAN Community Name string.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.21DisplayString (SIZE(0..32))read-writemandatory
snVLanByPortCfgRouterIntf
OBJECT-TYPE
Optional: A virtual interface for router to the VLAN -- applied to router only. If a SNMP-Get value is zero, that means this object was not configured.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.22INTEGERread-writemandatory
snVLanByPortCfgRowStatus
OBJECT-TYPE
Use object to delete a vlan entry.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.23INTEGER {other(1), valid(2), delete(3)}read-writemandatory
snSwPortInfo
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3
snSwPortInfoTable
OBJECT-TYPE
A specific snSwPortInfo group consists of a number of switch ports.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1not-accessiblemandatory
snSwPortInfoEntry
OBJECT-TYPE
An entry in the snSwPortInfo table indicates the configuration on a specified port. A SNMP SET PDU for a row of the snSwPortInfoTable requires the entired sequence of the MIB Objects in each snSwPortInfoEntry stored in one PDU. Otherwise, GENERR return-value will be returned.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1not-accessiblemandatory
snSwPortInfoPortNum
OBJECT-TYPE
The port index. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only).
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.1INTEGERread-onlymandatory
snSwPortInfoMonitorMode
OBJECT-TYPE
A monitoring port is selected and its traffic will be analyzed if the mode is not disabled(0), which is the default mode. The values are: disabled(0) -- No traffic monitoring input(1) -- traffic monitoring is activated on packets received output(2) -- traffic monitoring is activated on packets transmitted both(3) -- traffic monitoring is activated on packets received and transmitted.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.2INTEGER {disabled(0), input(1), output(2), both(3)}read-writemandatory
snSwPortInfoTagMode
OBJECT-TYPE
For tagged port, we could have multiple VLANs per port. For untagged port or auto port, there is only one VLAN ID per port.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.3INTEGER {tagged(1), untagged(2), auto(3), disabled(4)}read-writemandatory
snSwPortInfoChnMode
OBJECT-TYPE
The port can be configured to operate in either half or full duplex mode. The values are: halfDuplex(1)...half duplex mode fullDuplex(2)...full duplex mode The read-back channel status from hardware are: none(0).........link down or port disabled. halfDuplex(1)...half duplex mode fullDuplex(2)...full duplex mode The port media type (expansion or regular) and port link type (trunk or feeder) determine value of this object. The port can not set to half duplex mode if the port connect mode is m200e(4). However, the value of this parameter may be automatically set whenever the expansion port is connected (e.g. cascade connecting device).
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.4INTEGER {none(0), halfDuplex(1), fullDuplex(2)}read-writemandatory
snSwPortInfoSpeed
OBJECT-TYPE
The speed configuration for a port. The values are: none(0)..........link down or no traffic. sAutoSense(1)....Auto-sensing 10 or 100Mbits. s10M(2)..........10Mbits per second. s100M(3).........100Mbits per second. s1G(4)...........1Gbits per second. s45M(5)..........45Mbits per second (T3) (for expansion board only). s155M(6).........155Mbits per second (ATM) (for expansion board only). s10G(7)..........10Gbits per second. The read-back hardware status are the following: none(0)..........link down or no traffic. s10M(2)..........10Mbits per second. s100M(3).........100Mbits per second. s1G(4)...........1Gbits per second. s45M(5)..........45Mbits per second (T3) (for expansion board only). s155M(6).........155Mbits per second (ATM) (for expansion board only). s10G(7)..........10Gbits per second. The port media type (expansion or regular) and port link type (trunk or feeder) determine whether this object can be written and the valid values. It is not allowed to change speed for trunks ports. For expansion ports, all of the above speed can be set. However, the value of this parameter may be automatically set whenever the expansion port is connected (e.g. cascade connecting device).
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.5INTEGER {none(0), sAutoSense(1), s10M(2), s100M(3), s1G(4), s45M(5), s155M(6), s10G(7)}read-writemandatory
snSwPortInfoMediaType
OBJECT-TYPE
The media type for the port. The values are: other(1).........other or unknown media. m100BaseTX(2)....100Mbits per second copper. m100BaseFX(3)....100Mbits per second fiber. m1000BaseFX(4)...1Gbits per second fiber. mT3(5)...........45Mbits per second (T3). m155ATM(6).......155Mbits per second (ATM). m1000BaseTX(7)...1Gbits per second copper. m622ATM(8).......622Mbits per second (ATM). m155POS(9).......155Mbits per second (POS). m622POS(10)......622Mbits per second (POS). m2488POS(11).....2488Mbits per second (POS). m10000BaseFX(12).10Gbits per second fiber.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.6INTEGER {other(1), m100BaseTX(2), m100BaseFX(3), m1000BaseFX(4), mT3(5), m155ATM(6), m1000BaseTX(7), m622ATM(8), m155POS(9), m622POS(10), m2488POS(11), m10000BaseFX(12)}read-onlymandatory
snSwPortInfoConnectorType
OBJECT-TYPE
The type of connector that the port offers. The values are: other(1)...........other or unknown connector copper(2)..........Copper connector fiber(3)...........Fiber connector This describes the physical connector type
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.7INTEGER {other(1), copper(2), fiber(3)}read-onlymandatory
snSwPortInfoAdminStatus
OBJECT-TYPE
The desired state of all ports. The testing(3) state indicates that no operational packets can be passed. (same as ifAdminStatus in MIB-II)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.8INTEGER {up(1), down(2), testing(3)}read-writemandatory
snSwPortInfoLinkStatus
OBJECT-TYPE
The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. (same as ifOperStatus in MIB-II)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.9INTEGER {up(1), down(2), testing(3)}read-onlymandatory
snSwPortInfoPortQos
OBJECT-TYPE
The Stand alone stackable switch Port Qos Priority values are: low(0) -- low prority high(1) -- high prority. The BigIron Port Qos Priority values are: level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.10INTEGER {level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)}read-writemandatory
snSwPortInfoPhysAddress
OBJECT-TYPE
The port physical address. The physical address represents the switch port.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.11PhysAddressread-onlymandatory
snSwPortStatsInFrames
OBJECT-TYPE
The total number of packets received on the interface.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.12Counterread-onlymandatory
snSwPortStatsOutFrames
OBJECT-TYPE
The total number of packets transmitted out of the interface.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.13Counterread-onlymandatory
snSwPortStatsAlignErrors
OBJECT-TYPE
dot3StatsAlignmentErrors : A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.14Counterread-onlymandatory
snSwPortStatsFCSErrors
OBJECT-TYPE
dot3StatsFCSErrors : A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.15Counterread-onlymandatory
snSwPortStatsMultiColliFrames
OBJECT-TYPE
dot3StatsMultipleCollisionFrames : A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsSingleCollisionFrames object.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.16Counterread-onlymandatory
snSwPortStatsFrameTooLongs
OBJECT-TYPE
dot3StatsFrameTooLongs : A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incremented when the frameTooLong status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.17Counterread-onlymandatory
snSwPortStatsTxColliFrames
OBJECT-TYPE
A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by a combination of both dot3StatsSingleCollisionFrames and dot3StatsMultipleCollisionFrames objects.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.18Counterread-onlymandatory
snSwPortStatsRxColliFrames
OBJECT-TYPE
A count of successfully received frames on a particular interface for which transmission is inhibited by more than one collision. This object is not specified in dot3 but it has the same functionarity as snSwPortStatsTxColliFrames.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.19Counterread-onlymandatory
snSwPortStatsFrameTooShorts
OBJECT-TYPE
A count of frames received on a particular interface that below the minimum permitted frame size.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.20Counterread-onlymandatory
snSwPortLockAddressCount
OBJECT-TYPE
The number of source MAC addresses are allowed for a port. Writing 0 to this object will allow any number of addresses.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.21INTEGER (0..2048)read-writemandatory
snSwPortStpPortEnable
OBJECT-TYPE
The enabled/disabled status of the port.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.22INTEGER {disabled(0), enabled(1)}read-writemandatory
snSwPortDhcpGateListId
OBJECT-TYPE
The ID for a DHCP gateway list entry relative to this switch port. 0 = unset or no assigned ID
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.23INTEGER (0..32)read-writemandatory
snSwPortName
OBJECT-TYPE
Port Name string.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.24DisplayString (SIZE(0..255))read-writemandatory
snSwPortStatsInBcastFrames
OBJECT-TYPE
The total number of broadcast packets received on the interface.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.25Counterread-onlymandatory
snSwPortStatsOutBcastFrames
OBJECT-TYPE
The total number of broadcast packets transmitted out of the interface.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.26Counterread-onlymandatory
snSwPortStatsInMcastFrames
OBJECT-TYPE
The total number of multicast packets received on the interface.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.27Counterread-onlymandatory
snSwPortStatsOutMcastFrames
OBJECT-TYPE
The total number of multicast packets transmitted out of the interface.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.28Counterread-onlymandatory
snSwPortStatsInDiscard
OBJECT-TYPE
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.29Counterread-onlymandatory
snSwPortStatsOutDiscard
OBJECT-TYPE
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.30Counterread-onlymandatory
snSwPortStatsMacStations
OBJECT-TYPE
The total number of MAC Stations connected to the interface.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.31INTEGERread-onlymandatory
snSwPortCacheGroupId
OBJECT-TYPE
Cache Group ID for the interface.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.32INTEGERread-writemandatory
snSwPortTransGroupId
OBJECT-TYPE
Transparent Group ID for the interface.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.33INTEGERread-writemandatory
snSwPortInfoAutoNegotiate
OBJECT-TYPE
This feature only applies to Gigabit Ethernet ports. If set to disable(0), port will be put to non-negotiation mode. If set to enable(1), port will start auto-negotiation indefinitely until succeed. If set to negFullAuto(2), the port will start with auto- negotiation, if the negotiation failed, then it will automatically switch to non-negotiation mode. Stackable products (except TurboIron 8) Gigabit Ethernet ports do not support negFullAuto(2). If set to global(3), port negotiation mode follows the value of snSwGlobalAutoNegotiate. Non-Gigabit Ethernet port returns the value other(4).
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.34INTEGER {disabled(0), enabled(1), negFullAuto(2), global(3), other(4)}read-writemandatory
snSwPortInfoFlowControl
OBJECT-TYPE
Enable/Disbale port flow control.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.35INTEGER {disabled(0), enabled(1)}read-writemandatory
snSwPortInfoGigType
OBJECT-TYPE
The media type for the port. The values are: m1000BaseSX(0)....1Gbits per second fiber, with a short wavelength transceiver. m1000BaseLX(1)....1Gbits per second fiber, with a long wavelength transceiver (3km). m1000BaseLH(2)....1Gbits per second fiber, with a special wavelength transceiver (50km). m1000BaseLHA(3)....1Gbits per second fiber, with a special wavelength transceiver (70km). m1000BaseLHB(4)....1Gbits per second fiber, with a special wavelength transceiver (150km). m1000BaseTX(5)....1Gbits per second copper (100meter). m10000BaseSR(6)....10Gbits per second fiber, with a short range wavelength transceiver (100m). m10000BaseLR(7)....10Gbits per second fiber, with a long range wavelength transceiver (10km). m10000BaseER(8)....10Gbits per second fiber, with a extended range wavelength transceiver (40km). notApplicable(255)....a non-gigabit port.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.36INTEGER {m1000BaseSX(0), m1000BaseLX(1), m1000BaseLH(2), m1000BaseLHA(3), m1000BaseLHB(4), m1000BaseTX(5), m10000BaseSR(6), m10000BaseLR(7), m10000BaseER(8), notApplicable(255)}read-onlymandatory
snSwPortStatsLinkChange
OBJECT-TYPE
The total number of link state change of the interface.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.37Counterread-onlymandatory
snSwPortIfIndex
OBJECT-TYPE
In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 1213 and RFC 1573.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.38INTEGERread-onlymandatory
snSwPortDescr
OBJECT-TYPE
A textual string containing the slot/port information about the interface.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.39DisplayStringread-onlymandatory
snSwPortInOctets
OBJECT-TYPE
The total number of octets received on the interface, including framing characters. This object is a 64-bit counter of the ifInOctets object, defined in RFC 1213. The octet string is in big-endian byte order.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.40OCTET STRING (SIZE(8))read-onlymandatory
snSwPortOutOctets
OBJECT-TYPE
The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit counter of the ifOutOctets object, defined in RFC 1213. The octet string is in big-endian byte order.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.41OCTET STRING (SIZE(8))read-onlymandatory
snSwPortStatsInBitsPerSec
OBJECT-TYPE
The number of bits per second received on the interface over a 5 minutes interval.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.42Gaugeread-onlymandatory
snSwPortStatsOutBitsPerSec
OBJECT-TYPE
The number of bits per second transmitted out of the interface over a 5 minutes interval.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.43Gaugeread-onlymandatory
snSwPortStatsInPktsPerSec
OBJECT-TYPE
The number of packets per second received on the interface over a 5 minutes interval.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.44Gaugeread-onlymandatory
snSwPortStatsOutPktsPerSec
OBJECT-TYPE
The number of packets per second transmitted out of the interface over a 5 minutes interval.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.45Gaugeread-onlymandatory
snSwPortStatsInUtilization
OBJECT-TYPE
The input network utilization in hundredths of a percent over a 5 minutes interval.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.46INTEGER (0..10000)read-onlymandatory
snSwPortStatsOutUtilization
OBJECT-TYPE
The output network utilization in hundredths of a percent over a 5 minutes interval.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.47INTEGER (0..10000)read-onlymandatory
snSwPortFastSpanPortEnable
OBJECT-TYPE
The enabled/disabled fast span port status of the port.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.48INTEGER {disabled(0), enabled(1)}read-writemandatory
snSwPortFastSpanUplinkEnable
OBJECT-TYPE
The enabled/disabled fast span uplink status of the port.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.49INTEGER {disabled(0), enabled(1)}read-writemandatory
snSwPortVlanId
OBJECT-TYPE
The ID of a VLAN of which this port is a member. Port must be untagged. For tagged port which belongs to multiple VLANs, this object return 0 which is an invalid VLAN ID value.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.50INTEGER (0..4095)read-writemandatory
snSwPortRouteOnly
OBJECT-TYPE
Enable/Disable L2 switching of a routing switch port. By default, the routing switch performs routing first. If routing failed, it performs switching. Enable route only instrcuts the routing switch to perform routing only. For a L2 switching only product, reading this object always return 'disabled', writing 'enabled' to this object takes no effect.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.51INTEGER {disabled(0), enabled(1)}read-writemandatory
snSwPortPresent
OBJECT-TYPE
Indicate if the port is absent or present. This object only valid for M4 module
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.52INTEGER {false(0), true(1)}read-onlymandatory
snSwPortGBICStatus
OBJECT-TYPE
Indicate if the gig port has GBICs on them. If set to GBIC(1), it means that the port is GBIC. If set to miniGBIC(2), it means that the port miniGBIC. If set to empty(3), it means that the GBIC is missing. Value other(4) means that the port not a removable gig port.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.53INTEGER {gbic(1), miniGBIC(2), empty(3), other(4)}read-onlymandatory
snSwPortStatsInKiloBitsPerSec
OBJECT-TYPE
Bit rate in kilobits per second received on the 10G and faster interface over a 5 minutes interval.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.54Unsigned32read-onlymandatory
snSwPortStatsOutKiloBitsPerSec
OBJECT-TYPE
Bit rate in kilobits per second transmitted out of the 10G and faster interface over a 5 minutes interval.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.55Unsigned32read-onlymandatory
snSwPortLoadInterval
OBJECT-TYPE
The time in seconds for which average port utilization should be carried out. The value should be incremental of 30 seconds, between the ranges specified.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.56INTEGER (30..300)read-writemandatory
snSwPortTagType
OBJECT-TYPE
The IEEE802.1q tag type embedded in the length/type field of an Ethernet packet. It specifies that the 2 octets after the length/type field in an Ethernet packet is the tag value.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.57INTEGERread-writemandatory
snInterfaceId
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.2
snInterfaceLookupTable
OBJECT-TYPE
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.3not-accessiblemandatory
snInterfaceLookupEntry
OBJECT-TYPE
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.3.1not-accessiblemandatory
snInterfaceLookupInterfaceId
OBJECT-TYPE
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.3.1.1InterfaceIdread-onlymandatory
snInterfaceLookupIfIndex
OBJECT-TYPE
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.3.1.2INTEGERread-onlymandatory
snIfIndexLookupTable
OBJECT-TYPE
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.4not-accessiblemandatory
snIfIndexLookupEntry
OBJECT-TYPE
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.4.1not-accessiblemandatory
snIfIndexLookupIfIndex
OBJECT-TYPE
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.4.1.1INTEGERread-onlymandatory
snIfIndexLookupInterfaceId
OBJECT-TYPE
1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.4.1.2InterfaceIdread-onlymandatory
snFdbInfo
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.4
snFdbTable
OBJECT-TYPE
This table contains snFdb information for each station known to the system, one entry per station.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1not-accessiblemandatory
snFdbEntry
OBJECT-TYPE
Each entry represents the information of a static MAC station.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1not-accessiblemandatory
snFdbStationIndex
OBJECT-TYPE
The FDB Station index to the Fdb Station Table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.1INTEGER (1..256)read-onlymandatory
snFdbStationAddr
OBJECT-TYPE
The snFdbs physical address. The physical address represents a MAC Station.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.2PhysAddressread-writemandatory
snFdbStationPort
OBJECT-TYPE
Station slot/port number. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only).
1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.3INTEGERread-writemandatory
snFdbVLanId
OBJECT-TYPE
The Station VLan ID.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.4INTEGER (1..65535)read-writemandatory
snFdbStationQos
OBJECT-TYPE
The Stand alone stackable station Qos Priority values are: low(0) -- low prority high(1) -- high prority. The BigIron switch station Priority values are: level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.5INTEGER {level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7)}read-writemandatory
snFdbStationType
OBJECT-TYPE
The station type values are: notSupported -- a read value only : this product does not support MultiLayer Switching. host -- any MAC station. router -- a router-typed station.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.6INTEGER {notSupported(0), host(1), router(2)}read-writemandatory
snFdbRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid
1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.7INTEGER {other(1), valid(2), delete(3), create(4)}read-writemandatory
snPortStpInfo
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.5
snPortStpTable
OBJECT-TYPE
A specific snPortStpTable consists of a number of switch ports. This table only exists if only if snVLanByPortTable exists and snVLanByPortStpMode is enabled for each VLAN.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1not-accessiblemandatory
snPortStpEntry
OBJECT-TYPE
An entry in the snPortStpTable indicates the configuration on a specified port. A SNMP SET PDU for a row of the snPortStpTable requires the entired sequence of the MIB Objects in each snPortStpEntry stored in one PDU. Otherwise, GENERR return-value will be returned.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1not-accessiblemandatory
snPortStpVLanId
OBJECT-TYPE
The VLAN ID of the VLAN switch community.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.1INTEGER (1..65535)read-onlymandatory
snPortStpPortNum
OBJECT-TYPE
The port number of the Switch. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only).
1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.2INTEGERread-onlymandatory
snPortStpPortPriority
OBJECT-TYPE
The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.3INTEGER (8..255)read-writemandatory
snPortStpPathCost
OBJECT-TYPE
dot1dStpPortPathCost : The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. Writing value zero to this object sets path cost to a default value which automatically changes according to port speed. Reading value zero indicates an unknown path cost value because port speed cannot be determined due to speed auto sense in progress.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.4INTEGER (0..65535)read-writemandatory
snPortStpOperState
OBJECT-TYPE
By default, this mode is set to notActivated(0). notActivated(0)...the Port STP entry is not activated and not in running mode. activated(1)......the Port STP entry is activated and in running mode
1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.5INTEGER {notActivated(0), activated(1)}read-onlymandatory
snPortStpPortEnable
OBJECT-TYPE
The enabled/disabled status of the port.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.6INTEGER {enabled(1), disabled(2)}not-accessiblemandatory
snPortStpPortForwardTransitions
OBJECT-TYPE
The number of times this port has transitioned from the Learning state to the Forwarding state.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.7Counternot-accessiblemandatory
snPortStpPortState
OBJECT-TYPE
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpPortEnable), this object will have a value of disabled(1).
1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.8INTEGER {disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)}read-onlymandatory
snPortStpPortDesignatedCost
OBJECT-TYPE
The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.9INTEGERread-onlymandatory
snPortStpPortDesignatedRoot
OBJECT-TYPE
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.10BridgeIdread-onlymandatory
snPortStpPortDesignatedBridge
OBJECT-TYPE
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.11BridgeIdread-onlymandatory
snPortStpPortDesignatedPort
OBJECT-TYPE
The Port Identifier of the port on the Designated Bridge for this port's segment.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.12OCTET STRING (SIZE(2))read-onlymandatory
snTrunkInfo
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.6
snTrunkTable
OBJECT-TYPE
A specific snTrunkTable consists of a number of Trunk port-mask.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.1not-accessiblemandatory
snTrunkEntry
OBJECT-TYPE
An entry in the snTrunkTable indicates the configuration on a specified Trunk port membership.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.1.1not-accessiblemandatory
snTrunkIndex
OBJECT-TYPE
The number of the trunk entries can be configured.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.1.1.1INTEGER (1..64)read-onlymandatory
snTrunkPortMask
OBJECT-TYPE
Trunk membership of the Switch.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.1.1.2PortMaskread-writemandatory
snTrunkType
OBJECT-TYPE
The trunk connection type which specifies what device the trunk ports are connected to.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.1.1.3INTEGER {switch(1), server(2)}read-writemandatory
snMSTrunkTable
OBJECT-TYPE
A table contains the configuration of port members of multi-slot trunk groups.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.2not-accessiblemandatory
snMSTrunkEntry
OBJECT-TYPE
An entry of the snMSTrunkTable.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.2.1not-accessiblemandatory
snMSTrunkPortIndex
OBJECT-TYPE
The primary port of a trunk group. For module with Gig ports, primary port is port 1, 3, 5, 7. For module with 10/100 ports, primary port is port 1, 5, 9, 13, 17, 21.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.2.1.1INTEGERread-onlymandatory
snMSTrunkPortList
OBJECT-TYPE
A list of port indices which are the port membership of a trunk group. Each port index is a 16-bit integer in big endian order. The first port index must be the primary port index.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.2.1.2OCTET STRINGread-writemandatory
snMSTrunkType
OBJECT-TYPE
The trunk connection type which specifies what device the trunk ports are connected to.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.2.1.3INTEGER {switch(1), server(2)}read-writemandatory
snMSTrunkRowStatus
OBJECT-TYPE
To create or delete a table entry.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.2.1.4INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)}read-writemandatory
snSwSummary
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.7
snSwSummaryMode
OBJECT-TYPE
The Switch Group Configuration Summary is configured either enabled or disabled and the default is disabled mode. enabled(1)...........activate Switch Configuration Summary. disabled(0)..........no Switch Configuration Summary.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.7.1INTEGER {disabled(0), enabled(1)}read-writemandatory
snDhcpGatewayListInfo
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.8
snDhcpGatewayListTable
OBJECT-TYPE
A table of DHCP gateway list of addresses.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.8.1not-accessiblemandatory
snDhcpGatewayListEntry
OBJECT-TYPE
An entry in the IP Port Address table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.8.1.1not-accessiblemandatory
snDhcpGatewayListId
OBJECT-TYPE
The ID for a DHCP gateway list entry.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.8.1.1.1INTEGER (1..32)read-onlymandatory
snDhcpGatewayListAddrList
OBJECT-TYPE
The DHCP gateway address list for each DHCP gateway list ID. This list contains 1 to 8 IP addresses represented by octet string.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.8.1.1.2OCTET STRING (SIZE(4..32))read-writemandatory
snDhcpGatewayListRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row or modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid
1.3.6.1.4.1.11.2.3.7.11.12.1.3.8.1.1.3INTEGER {other(1), valid(2), delete(3), create(4)}read-writemandatory
snDnsInfo
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.9
snDnsDomainName
OBJECT-TYPE
DNS Domain Name string.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.9.1DisplayString (SIZE(0..80))read-writemandatory
snDnsGatewayIpAddrList
OBJECT-TYPE
The DNS Gateway IP address list. This list contains 4 IP addresses represented by octet string.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.9.2OCTET STRING (SIZE(16))read-writemandatory
snMacFilter
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.10
snMacFilterTable
OBJECT-TYPE
MAC filter table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1not-accessiblemandatory
snMacFilterEntry
OBJECT-TYPE
An entry in the MAC filter table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1not-accessiblemandatory
snMacFilterIndex
OBJECT-TYPE
The table index for a filter entry.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.1INTEGERread-onlymandatory
snMacFilterAction
OBJECT-TYPE
Action to take if the Mac packet match with this filter.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.2INTEGER {deny(0), permit(1)}read-writemandatory
snMacFilterSourceMac
OBJECT-TYPE
Source MAC address.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.3MacAddressread-writemandatory
snMacFilterSourceMask
OBJECT-TYPE
Source MAC subnet mask.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.4MacAddressread-writemandatory
snMacFilterDestMac
OBJECT-TYPE
Destination MAC address.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.5MacAddressread-writemandatory
snMacFilterDestMask
OBJECT-TYPE
Destination MAC subnet mask.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.6MacAddressread-writemandatory
snMacFilterOperator
OBJECT-TYPE
Type of comparison to perform.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.7INTEGER {equal(0), notEqual(1), less(2), greater(3)}read-writemandatory
snMacFilterFrameType
OBJECT-TYPE
Frame Type: ethernet-type, LLC and SNAP types
1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.8INTEGER {notUsed(0), ethernet(1), llc(2), snap(3)}read-writemandatory
snMacFilterFrameTypeNum
OBJECT-TYPE
Frame Type Number. 0 means NA
1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.9INTEGER (0..65535)read-writemandatory
snMacFilterRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.10INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)}read-writemandatory
snMacFilterPortAccessTable
OBJECT-TYPE
MAC Filter port access table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.2not-accessiblemandatory
snMacFilterPortAccessEntry
OBJECT-TYPE
An entry in the MAC Filter Port access table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.2.1not-accessiblemandatory
snMacFilterPortAccessPortIndex
OBJECT-TYPE
The port index. For FastIron/NetIron products, port index value is from 1 to 42 For BigIron products, port index is an encoded number: The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number. For virtual router interface, slot number is 15, port number is the virtual router port from 1 to 60. Therefore, port index value for BigIron is from 257 to 3900.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.2.1.1INTEGER (1..3900)read-onlymandatory
snMacFilterPortAccessFilters
OBJECT-TYPE
1st octet correspond to 1st filter number and so on.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.2.1.2OCTET STRINGread-writemandatory
snMacFilterPortAccessRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.2.1.3INTEGER {invalid(1), valid(2), delete(3), create(4)}read-writemandatory
snNTP
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.11
snNTPGeneral
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.1
snNTPPollInterval
OBJECT-TYPE
Interval specifies how often to poll the NTP server. Each unit is one second.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.1.1INTEGER (1..65535)read-writemandatory
snNTPTimeZone
OBJECT-TYPE
Time zone.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.1.2INTEGER {alaska(0), aleutian(1), arizona(2), central(3), eastIndiana(4), eastern(5), hawaii(6), michigan(7), mountain(8), pacific(9), samoa(10), gmtPlus12(11), gmtPlus11(12), gmtPlus10(13), gmtPlus9(14), gmtPlus8(15), gmtPlus7(16), gmtPlus6(17), gmtPlus5(18), gmtPlus4(19), gmtPlus3(20), gmtPlus2(21), gmtPlus1(22), gmt(23), gmtMinus1(24), gmtMinus2(25), gmtMinus3(26), gmtMinus4(27), gmtMinus5(28), gmtMinus6(29), gmtMinus7(30), gmtMinus8(31), gmtMinus9(32), gmtMinus10(33), gmtMinus11(34), gmtMinus12(35)}read-writemandatory
snNTPSummerTimeEnable
OBJECT-TYPE
Enable/Disable daylight saving time. This enables daylight saving time for time/date starting 02:00:00 of first Sunday in April and ending 02:00:00 of last Sunday in October every year.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.1.3INTEGER {disabled(0), enabled(1)}read-writemandatory
snNTPSystemClock
OBJECT-TYPE
System clock, in the following format: octet 0: seconds after the minute [0-60] octet 1: minutes after the hour [0-59] octet 2: hours since midnight [0-23] octet 3: day of the month [1-31] octet 4: months since January [0-11] octet 5: years since 1900 octet 6: days since Sunday [0-6] Setting this object requires valid value in octets 0 to 5, and zero in octet 6. System clock can be disabled by setting zero to all octets.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.1.4OCTET STRING (SIZE(7))read-writemandatory
snNTPSync
OBJECT-TYPE
Initiate time synchronization to the NTP servers. For set operation, only 'synchronize(2)' is accepted. For get operation, always return 'other(1)'.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.1.5INTEGER {other(1), synchronize(2)}read-writemandatory
snNTPServerTable
OBJECT-TYPE
NTP (Network Time Protocol) server table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.2not-accessiblemandatory
snNTPServerEntry
OBJECT-TYPE
An entry in the NTP server table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.2.1not-accessiblemandatory
snNTPServerIp
OBJECT-TYPE
NTP server IP address.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.2.1.1IpAddressread-onlymandatory
snNTPServerVersion
OBJECT-TYPE
NTP server version.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.2.1.2INTEGER (1..4)read-writemandatory
snNTPServerRowStatus
OBJECT-TYPE
To create or delete a NTP server table entry.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.2.1.3INTEGER {other(1), valid(2), delete(3), create(4)}read-writemandatory
snRadius
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.12
snRadiusGeneral
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1
snRadiusSNMPAccess
OBJECT-TYPE
Indicate whether Radius group MIB obejcts can be accessed by SNMP manager. If value is disabled, all Radius group MIB objects return 'general error'.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.1INTEGER {disabled(0), enabled(1)}read-onlymandatory
snRadiusEnableTelnetAuth
OBJECT-TYPE
Enable/Disable telnet authentication specified by 'snRadiusLoginMethod'.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.2INTEGER {disabled(0), enabled(1)}read-writemandatory
snRadiusRetransmit
OBJECT-TYPE
The number of authentication query retransmissions to the Radius server.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.3INTEGER (0..5)read-writemandatory
snRadiusTimeOut
OBJECT-TYPE
Interval specifies how long to wait for authentication reply from the Radius server, each unit is one second.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.4INTEGER (1..15)read-writemandatory
snRadiusDeadTime
OBJECT-TYPE
Interval specifies Radius server dead time, each unit is one minute.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.5INTEGER (1..5)read-writemandatory
snRadiusKey
OBJECT-TYPE
Authentication key displayed as encrypted text.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.6DisplayString (SIZE(0..32))read-writemandatory
snRadiusLoginMethod
OBJECT-TYPE
A sequence of authentication methods. Each octet represents a method to authenticate the user login process. Each octet has the following enumeration value: enable(1) - authenticate by command line interface enable password radius(2) - authenticate by requesting radius server local(3) - authenticate by local user account table line(4) - authenticate by telnet password tacplus(5) - authenticate by requesting tacplus server none(6) - do not authenticate tacacs(7) - authenticate by requesting tacacs server Setting a zero length octet string invalidates all previous authentication methods.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.7OCTET STRING (SIZE(0..7))read-writemandatory
snRadiusEnableMethod
OBJECT-TYPE
A sequence of authentication methods. Each octet represents a method to authenticate the user entering priviledge mode of the command line interface. Each octet has the following enumeration value: enable(1) - authenticate by command line interface enable password radius(2) - authenticate by requesting radius server local(3) - authenticate by local user account table line(4) - authenticate by telnet password tacplus(5) - authenticate by requesting tacplus server none(6) - do not authenticate tacacs(7) - authenticate by requesting tacacs server Setting a zero length octet string invalidates all previous authentication methods.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.8OCTET STRING (SIZE(0..7))read-writemandatory
snRadiusWebServerMethod
OBJECT-TYPE
A sequence of authentication methods. Each octet represents a method to authenticate the user accessing the web-server. Each octet has the following enumeration value: enable(1) - authenticate by command line interface enable password radius(2) - authenticate by requesting radius server local(3) - authenticate by local user account table line(4) - authenticate by telnet password tacplus(5) - authenticate by requesting tacplus server none(6) - do not authenticate tacacs(7) - authenticate by requesting tacacs server Setting a zero length octet string invalidates all previous authentication methods.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.9OCTET STRING (SIZE(0..7))read-writemandatory
snRadiusSNMPServerMethod
OBJECT-TYPE
A sequence of authentication methods. Each octet represents a method to authenticate the user accessing the snmp-server. Each octet has the following enumeration value: enable(1) - authenticate by command line interface enable password radius(2) - authenticate by requesting radius server local(3) - authenticate by local user account table line(4) - authenticate by telnet password tacplus(5) - authenticate by requesting tacplus server none(6) - do not authenticate tacacs(7) - authenticate by requesting tacacs server Setting a zero length octet string invalidates all previous authentication methods.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.10OCTET STRING (SIZE(0..7))read-writemandatory
snRadiusServerTable
OBJECT-TYPE
Radius server table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2not-accessiblemandatory
snRadiusServerEntry
OBJECT-TYPE
An entry in the Radius server table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1not-accessiblemandatory
snRadiusServerIp
OBJECT-TYPE
Radius server IP address.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1.1IpAddressread-onlymandatory
snRadiusServerAuthPort
OBJECT-TYPE
Authentication UDP port number.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1.2INTEGERread-writemandatory
snRadiusServerAcctPort
OBJECT-TYPE
Account UDP port number.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1.3INTEGERread-writemandatory
snRadiusServerRowStatus
OBJECT-TYPE
To create or delete a Radius server table entry.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1.4INTEGER {other(1), valid(2), delete(3), create(4)}read-writemandatory
snRadiusServerRowKey
OBJECT-TYPE
Authentication key displayed as encrypted text.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1.5DisplayString (SIZE(0..32))read-writemandatory
snRadiusServerUsage
OBJECT-TYPE
To allow this server to be dedicated for a particular AAA activity.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1.6INTEGER {default(1), authentication-only(2), authorization-only(3), accounting-only(4)}read-writemandatory
snTacacs
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.13
snTacacsGeneral
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.1
snTacacsRetransmit
OBJECT-TYPE
The number of authentication query retransmissions to the Tacacs server.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.1.1INTEGER (0..5)read-writemandatory
snTacacsTimeOut
OBJECT-TYPE
Interval specifies how long to wait for authentication reply from the Tacacs server, each unit is one second.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.1.2INTEGER (1..15)read-writemandatory
snTacacsDeadTime
OBJECT-TYPE
Interval specifies Tacacs server dead time, each unit is one minute.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.1.3INTEGER (1..5)read-writemandatory
snTacacsKey
OBJECT-TYPE
Authentication key displayed as encrypted text.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.1.4DisplayString (SIZE(0..32))read-writemandatory
snTacacsSNMPAccess
OBJECT-TYPE
Indicate whether Tacacs group MIB obejcts can be accessed by SNMP manager. If value is disabled, all Tacacs group MIB objects return 'general error'.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.1.5INTEGER {disabled(0), enabled(1)}read-onlymandatory
snTacacsServerTable
OBJECT-TYPE
Tacacs server table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2not-accessiblemandatory
snTacacsServerEntry
OBJECT-TYPE
An entry in the Tacacs server table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2.1not-accessiblemandatory
snTacacsServerIp
OBJECT-TYPE
Tacacs server IP address.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2.1.1IpAddressread-onlymandatory
snTacacsServerAuthPort
OBJECT-TYPE
Authentication UDP port number.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2.1.2INTEGERread-writemandatory
snTacacsServerRowStatus
OBJECT-TYPE
To create or delete a Tacacs server table entry.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2.1.3INTEGER {other(1), valid(2), delete(3), create(4)}read-writemandatory
snTacacsServerRowKey
OBJECT-TYPE
Authentication key displayed as encrypted text.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2.1.4DisplayString (SIZE(0..32))read-writemandatory
snTacacsServerUsage
OBJECT-TYPE
To allow this server to be dedicated for a particular AAA activity.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2.1.5INTEGER {default(1), authentication-only(2), authorization-only(3), accounting-only(4)}read-writemandatory
snQos
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.14
snQosProfileTable
OBJECT-TYPE
A table contains the configuration of qos profile groups.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.1not-accessiblemandatory
snQosProfileEntry
OBJECT-TYPE
An entry of the snQosProfileTable.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.1.1not-accessiblemandatory
snQosProfileIndex
OBJECT-TYPE
The table index of QOS Profile.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.1.1.1INTEGER (1..4)read-onlymandatory
snQosProfileName
OBJECT-TYPE
Qos Profile Name string.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.1.1.2DisplayString (SIZE(0..32))read-writemandatory
snQosProfileRequestedBandwidth
OBJECT-TYPE
Qos Profile Requested Bandwidth.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.1.1.3INTEGER (0..100)read-writemandatory
snQosProfileCalculatedBandwidth
OBJECT-TYPE
Qos Profile Calculated Bandwidth.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.1.1.4INTEGER (0..100)read-onlymandatory
snQosBindTable
OBJECT-TYPE
A table contains the configuration of 802.1p to qos profile binding groups.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.2not-accessiblemandatory
snQosBindEntry
OBJECT-TYPE
An entry of the snQosBindTable.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.2.1not-accessiblemandatory
snQosBindIndex
OBJECT-TYPE
The table index of QOS Bind.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.2.1.1INTEGER (1..8)read-onlymandatory
snQosBindPriority
OBJECT-TYPE
QOS bind priority.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.2.1.2INTEGERread-onlymandatory
snQosBindProfileIndex
OBJECT-TYPE
QOS Bind Profile Index. This is pointer to the index of snQosProfile Table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.2.1.3INTEGER (1..4)read-writemandatory
snAAA
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.15
snAuthentication
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.1
snAuthorization
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.2
snAuthorizationCommandMethods
OBJECT-TYPE
A sequence of authorization methods. Each octet represents a method to authorize the user command. Each octet has the following value: radius(2) - authorize by requesting radius server tacplus(5) - authorize by requesting tacplus server none(6) - skip authorization Setting a zero length octet string invalidates all previous authorization methods.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.2.1OCTET STRING (SIZE(0..3))read-writemandatory
snAuthorizationCommandLevel
OBJECT-TYPE
Commands, which are equal to and less than the specified command level here needs to be authorized. Possible enumeration values: 0 - Privilege level 0 4 - Privilege level 4 5 - Privilege level 5.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.2.2INTEGER {level0(0), level4(4), level5(5)}read-writemandatory
snAuthorizationExec
OBJECT-TYPE
A sequence of exec authorization methods. Each octet represents a method for telnet or SSH login authorization. Each octet has the following enumeration value: radius(2) - send exec authorization request to radius server tacplus(5) - send exec authorization request to tacplus server none(6) - no exec authorization Setting a zero length octet string invalidates all authorization methods.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.2.3OCTET STRING (SIZE(0..3))read-writemandatory
snAccounting
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.3
snAccountingCommandMethods
OBJECT-TYPE
A sequence of accounting methods. Each octet represents a method to account for the user command. Each octet has the following enumeration value: radius(2) - send accounting info to radius server tacplus(5) - send accounting info to tacplus server none(6) - skip accounting Setting a zero length octet string invalidates all previous accounting methods.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.3.1OCTET STRING (SIZE(0..3))read-writemandatory
snAccountingCommandLevel
OBJECT-TYPE
Commands, which are equal to and less than the specified command level here will be accounted. Possible enumeration values: level0 - Privilege level 0 level4 - Privilege level 4 level5 - Privilege level 5.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.3.2INTEGER {level0(0), level4(4), level5(5)}read-writemandatory
snAccountingExec
OBJECT-TYPE
A sequence of accounting methods. Each octet represents a method for telnet or SSH login accounting. Each octet has the following enumeration value: radius(2) - send accounting info to radius server tacplus(5) - send accounting info to tacplus server none(6) - skip accounting Setting a zero length octet string invalidates all previous accounting methods.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.3.3OCTET STRING (SIZE(0..3))read-writemandatory
snAccountingSystem
OBJECT-TYPE
A sequence of accounting methods. Each octet represents a method to account for the system related events. Each octet has the following enumeration value: radius(2) - send accounting info to radius server tacplus(5) - send accounting info to tacplus server none(6) - skip accounting Setting a zero length octet string invalidates all previous accounting methods.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.3.4OCTET STRING (SIZE(0..3))read-writemandatory
snCAR
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.16
snVLanCAR
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.17
snNetFlow
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18
snNetFlowGlb
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.1
snNetFlowGblEnable
OBJECT-TYPE
Enable/disable NetFlow export operation.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.1.1INTEGER {disabled(0), enabled(1)}read-writemandatory
snNetFlowGblVersion
OBJECT-TYPE
NetFlow export version.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.1.2INTEGER {version1(1), version5(5)}read-writemandatory
snNetFlowGblProtocolDisable
OBJECT-TYPE
bit 0 - other, disable all protocols export except UDP and TCP bit 1 - tcp, disable TCP protocol export bit 2 - udp, disable UDP protocol export
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.1.3INTEGERread-writemandatory
snNetFlowGblActiveTimeout
OBJECT-TYPE
Maximum time an active flow can be in the NetFlow cache (minutes: 1..60)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.1.4INTEGERread-writemandatory
snNetFlowGblInactiveTimeout
OBJECT-TYPE
Maximum time an inactive flow can be in the NetFlow cache (seconds: 10..600)
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.1.5INTEGERread-writemandatory
snNetFlowCollectorTable
OBJECT-TYPE
A table of each NetFlow collector information.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2not-accessiblemandatory
snNetFlowCollectorEntry
OBJECT-TYPE
A row in the NetFlow collector table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2.1not-accessiblemandatory
snNetFlowCollectorIndex
OBJECT-TYPE
The index to the NetFlow collector table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2.1.1INTEGER (1..10)read-onlymandatory
snNetFlowCollectorIp
OBJECT-TYPE
The NetFlow collector ip address.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2.1.2IpAddressread-writemandatory
snNetFlowCollectorUdpPort
OBJECT-TYPE
The NetFlow collector UDP port number.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2.1.3INTEGERread-writemandatory
snNetFlowCollectorSourceInterface
OBJECT-TYPE
The ifIndex value to specify source port to export NetFlow packet. Value 0 to indicate default outgoing port.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2.1.4INTEGERread-writemandatory
snNetFlowCollectorRowStatus
OBJECT-TYPE
To create or delete a NetFlow collector table entry.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2.1.5INTEGER {other(1), valid(2), delete(3), create(4)}read-writemandatory
snNetFlowAggregationTable
OBJECT-TYPE
A table of each NetFlow aggregation scheme information.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3not-accessiblemandatory
snNetFlowAggregationEntry
OBJECT-TYPE
A row in the NetFlow Aggregation table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1not-accessiblemandatory
snNetFlowAggregationIndex
OBJECT-TYPE
The Aggregation scheme ID
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.1INTEGER {as(1), protocolPort(2), destPrefix(3), sourcePrefix(4), prefix(5)}read-onlymandatory
snNetFlowAggregationIp
OBJECT-TYPE
The NetFlow aggregation collector ip address.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.2IpAddressread-writemandatory
snNetFlowAggregationUdpPort
OBJECT-TYPE
The NetFlow aggregation collector UDP port number.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.3INTEGERread-writemandatory
snNetFlowAggregationSourceInterface
OBJECT-TYPE
The ifIndex value to specify source port to export NetFlow aggregation packet. Value 0 to indicate default outgoing port.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.4INTEGERread-writemandatory
snNetFlowAggregationNumberOfCacheEntries
OBJECT-TYPE
Number of cache entries for aggregation scheme
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.5INTEGERread-writemandatory
snNetFlowAggregationActiveTimeout
OBJECT-TYPE
Maximum time an active flow can be in the aggregation cache
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.6INTEGERread-writemandatory
snNetFlowAggregationInactiveTimeout
OBJECT-TYPE
Maximum time an inactive flow can be in the aggregation cache
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.7INTEGERread-writemandatory
snNetFlowAggregationEnable
OBJECT-TYPE
Enable/disable NetFlow aggregation for this aggregation scheme.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.8INTEGER {disabled(0), enabled(1)}read-writemandatory
snNetFlowAggregationRowStatus
OBJECT-TYPE
To create or delete a NetFlow collector table entry.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.9INTEGER {other(1), valid(2), delete(3), create(4)}read-writemandatory
snNetFlowIfTable
OBJECT-TYPE
A list of interface entries. The number of entries is given by the value of ifNumber.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.4not-accessiblemandatory
snNetFlowIfEntry
OBJECT-TYPE
Entry containing the type of switching performed on that interface.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.4.1not-accessiblemandatory
snNetFlowIfIndex
OBJECT-TYPE
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.4.1.1INTEGER (1..65536)read-onlymandatory
snNetFlowIfFlowSwitching
OBJECT-TYPE
To enable/disable flow switching in a particular interface: disable (0) - no flow switching enable (1) - flow switching
1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.4.1.2INTEGER {disabled(0), enabled(1)}read-writemandatory
snSFlow
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.19
snSFlowGlb
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.1
snSflowCollectorTable
OBJECT-TYPE
Table of all but first sFlow collectors. The first collector can be configured using sFlowTable in RFC 3176. The RFC cannot be used to configure more than one sFlow collectors. This table has been created to fill this gap.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.2not-accessiblemandatory
snSflowCollectorEntry
OBJECT-TYPE
A row in the sFlow collector table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.2.1not-accessiblemandatory
snSflowCollectorIndex
OBJECT-TYPE
The index to the sFlow collector table.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.2.1.1INTEGERread-onlymandatory
snSflowCollectorIP
OBJECT-TYPE
The sFlow collector ip address.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.2.1.2IpAddressread-writemandatory
snSflowCollectorUDPPort
OBJECT-TYPE
The sFlow collector UDP port number.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.2.1.3INTEGERread-writemandatory
snSflowCollectorRowStatus
OBJECT-TYPE
To create, update or delete a SFlow collector table entry. If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid
1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.2.1.4INTEGER {noSuch(0), other(1), valid(2), delete(3), create(4), modify(5)}read-writemandatory
snFDP
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20
snFdpMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1
snFdpInterface
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.1
snFdpInterfaceTable
OBJECT-TYPE
Status of FDP on the device's interfaces.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.1.1not-accessiblemandatory
snFdpInterfaceEntry
OBJECT-TYPE
An entry in the snFdpInterfaceTable, having the status of FDP on an interface.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.1.1.1not-accessiblemandatory
snFdpInterfaceIfIndex
OBJECT-TYPE
ifIndex value of the local interface.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.1.1.1.1INTEGERnot-accessiblemandatory
snFdpInterfaceFdpEnable
OBJECT-TYPE
The flag, whether the Foundry Discovery Protocol is currently running on this interface. It has no effect when FDP is disabled (snFdpGlobalRun = FALSE).
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.1.1.1.2INTEGER {false(0), true(1)}read-writemandatory
snFdpInterfaceCdpEnable
OBJECT-TYPE
The flag, whether the Cisco Discovery Protocol is currently running on this interface. It has no effect when CDP is disabled (snCdpGlobalRun = FALSE).
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.1.1.1.3INTEGER {false(0), true(1)}read-writemandatory
snFdpCache
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2
snFdpCacheTable
OBJECT-TYPE
The table for the cached information obtained via receiving FDP/CDP messages.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1not-accessiblemandatory
snFdpCacheEntry
OBJECT-TYPE
An entry in the snFdpCacheTable, having the information received via FDP/CDP on one interface from one device. Entries appear when a FDP/CDP advertisement is received from a neighbor device. Entries disappear when FDP/CDP is disabled on the interface, or globally.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1not-accessiblemandatory
snFdpCacheIfIndex
OBJECT-TYPE
ifIndex value of the local interface.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.1INTEGERnot-accessiblemandatory
snFdpCacheDeviceIndex
OBJECT-TYPE
Identification of a device, which sent FDP/CDP messages
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.2INTEGERnot-accessiblemandatory
snFdpCacheDeviceId
OBJECT-TYPE
The Device-ID string as reported in the most recent FDP/CDP message. The zero-length string indicates no Device-ID field (TLV) was reported in the most recent FDP/CDP message.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.3DisplayStringread-onlymandatory
snFdpCacheAddressType
OBJECT-TYPE
An indication of the type of address contained in the corresponding instance of snFdpCacheAddress.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.4INTEGER {ip(1), ipx(2), appletalk(3)}read-onlymandatory
snFdpCacheAddress
OBJECT-TYPE
The (first) network-layer address of the device as reported in the most recent FDP/CDP message in the following format: IP address: 4 octets, ip(1) IPX address: 10 octets, ipx(2) First 4-octet as the network number Second 6-octet as the host number Appletalk address: 3 octets, appletalk(3) First 2-octet as the network number Second 1-octet as the host number
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.5OCTET STRINGread-onlymandatory
snFdpCacheVersion
OBJECT-TYPE
Version string as reported in the most recent FDP/CDP message.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.6DisplayStringread-onlymandatory
snFdpCacheDevicePort
OBJECT-TYPE
The Port-ID string as reported in the most recent FDP/CDP message. This will typically be the value of the ifName object (e.g., Ethernet0). The zero-length string indicates no Port-ID field (TLV) was reported in the most recent FDP/CDP message.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.7DisplayStringread-onlymandatory
snFdpCachePlatform
OBJECT-TYPE
The Device's Hardware Platform as reported in the most recent FDP/CDP message. The zero-length string indicates that no Platform field (TLV) was reported in the most recent FDP/CDP message.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.8DisplayStringread-onlymandatory
snFdpCacheCapabilities
OBJECT-TYPE
The Device's Functional Capabilities as reported in the most recent FDP/CDP message.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.9DisplayStringread-onlymandatory
snFdpCacheVendorId
OBJECT-TYPE
Indicates the entry received by either FDP or CDP.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.10INTEGER {fdp(1), cdp(2)}read-onlymandatory
snFdpCacheIsAggregateVlan
OBJECT-TYPE
Neighbor device is in aggregated-vlan.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.11INTEGER {false(0), true(1)}read-onlymandatory
snFdpCacheTagType
OBJECT-TYPE
Neighbor device tag-type.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.12INTEGERread-onlymandatory
snFdpCachePortVlanMask
OBJECT-TYPE
Neighbor device port VLAN masks in 512-byte octet string.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.13OCTET STRINGread-onlymandatory
snFdpCachePortTagMode
OBJECT-TYPE
Neighbor device port tag mode
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.14INTEGER {untagged(1), tagged(2), dual(3)}read-onlymandatory
snFdpCacheDefaultTrafficeVlanIdForDualMode
OBJECT-TYPE
Default traffic vlan id for neighbor device dual-mode port
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.15INTEGERread-onlymandatory
snFdpGlobal
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.3
snFdpGlobalRun
OBJECT-TYPE
The flag, whether the Foundry Discovery Protocol is currently running. FDP entries in snFdpCacheTable are deleted when FDP is disabled.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.3.1INTEGER {false(0), true(1)}read-writemandatory
snFdpGlobalMessageInterval
OBJECT-TYPE
The interval at which FDP messages are to be generated. The default value is 60 seconds.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.3.2INTEGER (5..900)read-writemandatory
snFdpGlobalHoldTime
OBJECT-TYPE
The time for the receiving device holds FDP message. The default value is 180 seconds.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.3.3INTEGER (10..255)read-writemandatory
snFdpGlobalCdpRun
OBJECT-TYPE
An indication of whether the Cisco Discovery Protocol is currently running. CDP entries in snFdpCacheTable are deleted when CDP is disabled.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.3.4INTEGER {false(0), true(1)}read-writemandatory
snFdpCachedAddr
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4
snFdpCachedAddressTable
OBJECT-TYPE
Cached address table from receiving FDP/CDP messages.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1not-accessiblemandatory
snFdpCachedAddressEntry
OBJECT-TYPE
An entry (conceptual row) in the snFdpCacheAddressTable, containing one cached address from FDP/CDP messages.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1.1not-accessiblemandatory
snFdpCachedAddrIfIndex
OBJECT-TYPE
The ifIndex value of the local interface.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1.1.1INTEGERnot-accessiblemandatory
snFdpCachedAddrDeviceIndex
OBJECT-TYPE
A unique vlaue for each device from which FDP/CDP messages are being received.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1.1.2INTEGERnot-accessiblemandatory
snFdpCachedAddrDeviceAddrEntryIndex
OBJECT-TYPE
A unique vlaue for address entry in device from which FDP/CDP messages are being received.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1.1.3INTEGERnot-accessiblemandatory
snFdpCachedAddrType
OBJECT-TYPE
An indication of the type of address contained in the corresponding instance of snFdpCacheAddrValue.
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1.1.4INTEGER {ip(1), ipx(2), appletalk(3)}read-onlymandatory
snFdpCachedAddrValue
OBJECT-TYPE
The network-layer address of the device SNMP-agent as reported in the most recent FDP/CDP message in the following format: IP address: 4 octets, ip(1) IPX address: 10 octets, ipx(2) First 4-octet as the network number Second 6-octet as the host number Appletalk address: 3 octets, appletalk(3) First 2-octet as the network number Second 1-octet as the host number
1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1.1.5OCTET STRINGread-onlymandatory
snVsrp
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.1.3.21