MIBs Depot

HP-SN-MPLS-LSR-MIB

Registered at
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2
Last updated
2002-01-04 12:00
Organization
Multiprotocol Label Switching (MPLS) Working Group
Revisions
2002-01-04 12:00
Namespace
hp
Source file
HP-SN-MPLS-LSR-MIB
Digest
sha256:baf83fca1d01d04222f9149dd887d7c0457ec64ce9c0e543b72f1464d534447d

Description

This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS) Router as defined in: Rosen, E., Viswanathan, A., and R. Callon, Multiprotocol Label Switching Architecture, RFC 3031, January 2001.

Contact

Cheenu Srinivasan Postal: Parama Networks, Inc. 1030 Broad Street Shrewsbury, NJ 07702 Tel: +1-732-544-9120 x731 Email: cheenu@paramanet.com Arun Viswanathan Postal: Force10 Networks, Inc. 1440 McCarthy Blvd Milpitas, CA 95035 Tel: +1-408-571-3516 Email: arun@force10networks.com Thomas D. Nadeau Postal: Cisco Systems, Inc. 250 Apollo Drive Chelmsford, MA 01824 Tel: +1-978-244-3051 Email: tnadeau@cisco.com

Imports

FromSymbols
HP-SN-MPLS-TC-MIBMplsBitRate, MplsBurstSize, MplsInitialCreationSource, MplsLSPID, MplsLabel, mplsMIB
HP-SN-ROOT-MIBsnMpls
IANA-ADDRESS-FAMILY-NUMBERS-MIBAddressFamilyNumbers
IF-MIBInterfaceIndex, InterfaceIndexOrZero
INET-ADDRESS-MIBInetAddressIPv4, InetAddressIPv6, InetAddressType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Counter64, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowPointer, RowStatus, StorageType, TEXTUAL-CONVENTION, TimeStamp, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HP-SN-MPLS-LSR-MIB
HP-SN-MPLS-TC-MIB
HP-SN-ROOT-MIB
IANA-ADDRESS-FAMILY-NUMBERS-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
mplsLsrObjects
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1
mplsInterfaceConfTable
OBJECT-TYPE
This table specifies per-interface MPLS capability and associated information.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1not-accessiblecurrent
mplsInterfaceConfEntry
OBJECT-TYPE
An entry in this table is created by an LSR for every interface capable of supporting MPLS. Each entry in this table will exist only if a corresponding entry in ifTable exists. If the associated entry in ifTable is deleted, the corresponding entry in this table must also be deleted shortly thereafter. The entry with index 0 represents the per-platform label space and contains parameters that apply to all interfaces that participate in the per-platform label space. Other entries defined in this table represent additional MPLS interfaces that may participate in either the per-platform or per-interface label spaces, or both. Additional information about label space participation of an interface is provided in the description clause of mplsInterfaceLabelParticipationType.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1not-accessiblecurrent
mplsInterfaceConfIndex
OBJECT-TYPE
This is a unique index for an entry in the MplsInterfaceConfTable. A non-zero index for an entry indicates the ifIndex for the corresponding interface entry in of the MPLS-layer in the ifTable. Note that the per-platform label space may apply to several interfaces, and therefore the configuration of the per-platform label space interface parameters will apply to all of the interfaces that are participating in the per-platform label space.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.1InterfaceIndexOrZeronot-accessiblecurrent
mplsInterfaceLabelMinIn
OBJECT-TYPE
This is the minimum value of an MPLS label that this LSR is willing to receive on this interface.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.2MplsLabelread-onlycurrent
mplsInterfaceLabelMaxIn
OBJECT-TYPE
This is the maximum value of an MPLS label that this LSR is willing to receive on this interface.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.3MplsLabelread-onlycurrent
mplsInterfaceLabelMinOut
OBJECT-TYPE
This is the minimum value of an MPLS label that this LSR is willing to send on this interface.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.4MplsLabelread-onlycurrent
mplsInterfaceLabelMaxOut
OBJECT-TYPE
This is the maximum value of an MPLS label that this LSR is willing to send on this interface.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.5MplsLabelread-onlycurrent
mplsInterfaceTotalBandwidth
OBJECT-TYPE
This value indicates the total amount of usable bandwidth on this interface and is specified in kilobits per second (Kbps). This variable is not applicable when applied to the interface with index 0. When this value cannot be measured, this value should contain the nominal bandwidth.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.6MplsBitRateread-onlycurrent
mplsInterfaceAvailableBandwidth
OBJECT-TYPE
This value indicates the total amount of available bandwidth available on this interface and is specified in kilobits per second (Kbps). This value is calculated as the difference between the amount of bandwidth currently in use and that specified in mplsInterfaceTotalBandwidth. This variable is not applicable when applied to the interface with index 0. When this value cannot be measured, this value should contain the nominal bandwidth.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.7MplsBitRateread-onlycurrent
mplsInterfaceLabelParticipationType
OBJECT-TYPE
Either the perPlatform(0) or perInterface(1) bit MUST be set. If the value of the mplsInterfaceConfIndex for this entry is zero, then only the perPlatform(0) bit MUST be set and the perInterface(1) bit is meaningless. If the perInterface(1) bit is set then the value of mplsInterfaceLabelMinIn, mplsInterfaceLabelMaxIn, mplsInterfaceLabelMinOut, and mplsInterfaceLabelMaxOut for this entry reflect the label ranges for this interface. If only the perPlatform(0) bit is set, then the value of mplsInterfaceLabelMinIn, mplsInterfaceLabelMaxIn, mplsInterfaceLabelMinOut, and mplsInterfaceLabelMaxOut for this entry must be identical to the instance of these objects with index 0.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.8Bits {perPlatform(0), perInterface(1)}read-onlycurrent
mplsInterfacePerfTable
OBJECT-TYPE
This table provides MPLS performance information on a per-interface basis.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2not-accessiblecurrent
mplsInterfacePerfEntry
OBJECT-TYPE
An entry in this table is created by the LSR for every interface capable of supporting MPLS. Its is an extension to the mplsInterfaceConfEntry table.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1not-accessiblecurrent
mplsInterfaceInLabelsUsed
OBJECT-TYPE
This object counts the number of labels that are in use at this point in time on this interface in the incoming direction. If the interface participates in the per-platform label space only, then this instance of this object MUST be identical with the instance with index 0. If the interface participates in the per-interface label space, then this instance of this object MUST represent the number of of per- interface labels that are in use at this point in time on this interface.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1.1Gauge32read-onlycurrent
mplsInterfaceFailedLabelLookup
OBJECT-TYPE
This object counts the number of labeled packets that have been received on this interface and were discarded because there was no matching cross- connect entry. This object MUST count on a per- interface basis regardless of which label space the interface participates in.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1.2Counter32read-onlycurrent
mplsInterfaceOutLabelsUsed
OBJECT-TYPE
This object counts the number of top-most labels in the outgoing label stacks that are in use at this point in time on this interface. This object MUST count on a per-interface basis regardless of which label space the interface participates in.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1.3Gauge32read-onlycurrent
mplsInterfaceOutFragments
OBJECT-TYPE
This object counts the number of outgoing MPLS packets that required fragmentation before transmission on this interface. This object MUST count on a per-interface basis regardless of which label space the interface participates in.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1.4Counter32read-onlycurrent
mplsInSegmentTable
OBJECT-TYPE
This table contains a collection of incoming segments to an LSR.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3not-accessiblecurrent
mplsInSegmentEntry
OBJECT-TYPE
An entry in this table represents one incoming segment. An entry can be created by a network administrator or an SNMP agent, or an MPLS signaling protocol. The creator of the entry is denoted by mplsInSegmentOwner. An entry in this table is indexed by the ifIndex of the incoming interface and the (top) label. The value of mplsInSegmentRowStatus cannot be active(1)unless the ifTable entry corresponding to mplsInSegmentIfIndex exists.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1not-accessiblecurrent
mplsInSegmentIfIndex
OBJECT-TYPE
This is a unique index for an entry in the MplsInSegmentTable. This value represents the interface index for the incoming MPLS interface. A value of zero represents an incoming label from the per-platform label space. In this case, the mplsInSegmentLabel is interpreted to be an MPLS-type label.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.1InterfaceIndexOrZeronot-accessiblecurrent
mplsInSegmentLabel
OBJECT-TYPE
The incoming label for this segment.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.2MplsLabelnot-accessiblecurrent
mplsInSegmentNPop
OBJECT-TYPE
The number of labels to pop from the incoming packet. Normally only the top label is popped from the packet and used for all switching decisions for that packet. Note that technologies which do not support label popping should set this value to its default value of 1. This object cannot be modified if mplsInSegmentRowStatus is active(1).
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.3Integer32 (1..2147483647)read-createcurrent
mplsInSegmentAddrFamily
OBJECT-TYPE
The IANA address family [IANAFamily] of the incoming packet. A value of other(0) indicates that the family type is either unknown or undefined. This object cannot be modified if mplsInSegmentRowStatus is active(1).
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.4AddressFamilyNumbersread-createcurrent
mplsInSegmentXCIndex
OBJECT-TYPE
Index into mplsXCTable which identifies which cross- connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any cross-connect entry. When a cross-connect entry is created which this in-segment is a part of, this object is automatically updated to reflect the value of mplsXCIndex of that cross-connect entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.5Unsigned32 (0..4294967295)read-onlycurrent
mplsInSegmentOwner
OBJECT-TYPE
Denotes the entity that created and is responsible for managing this segment. This object cannot be modified if mplsInSegmentRowStatus is active(1).
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.6MplsInitialCreationSourceread-createcurrent
mplsInSegmentTrafficParamPtr
OBJECT-TYPE
This variable represents a pointer to the traffic parameter specification for this in-segment. This value may point at an entry in the mplsTrafficParamTable to indicate which mplsTrafficParamEntry is to be assigned to this segment. This value may optionally point at an externally defined traffic parameter specification table. A value of zero-dot-zero indicates best-effort treatment. By having the same value of this object, two or more segments can indicate resource sharing. This object cannot be modified if mplsInSegmentRowStatus is active(1).
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.7RowPointerread-createcurrent
mplsInSegmentRowStatus
OBJECT-TYPE
This variable is used to create, modify, and/or delete a row in this table.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.8RowStatusread-createcurrent
mplsInSegmentStorageType
OBJECT-TYPE
This variable indicates the storage type for this object. This object cannot be modified if mplsInSegmentRowStatus is active(1). If this variable is set to readOnly(5), and the corresponding TFIB entry is removed, then the agent must remove this row shortly thereafter.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.9StorageTyperead-createcurrent
mplsInSegmentPerfTable
OBJECT-TYPE
This table contains statistical information for incoming MPLS segments to an LSR.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4not-accessiblecurrent
mplsInSegmentPerfEntry
OBJECT-TYPE
An entry in this table contains statistical information about one incoming segment which was configured in the mplsInSegmentTable. The counters in this entry should behave in a manner similar to that of the interface.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1not-accessiblecurrent
mplsInSegmentOctets
OBJECT-TYPE
This value represents the total number of octets received by this segment.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.1Counter32read-onlycurrent
mplsInSegmentPackets
OBJECT-TYPE
Total number of packets received by this segment.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.2Counter32read-onlycurrent
mplsInSegmentErrors
OBJECT-TYPE
The number of errored packets received on this segment.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.3Counter32read-onlycurrent
mplsInSegmentDiscards
OBJECT-TYPE
The number of labeled packets received on this in- segment, which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a labeled packet could be to free up buffer space.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.4Counter32read-onlycurrent
mplsInSegmentHCOctets
OBJECT-TYPE
The total number of octets received. This is the 64 bit version of mplsInSegmentOctets.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.5Counter64read-onlycurrent
mplsInSegmentPerfDiscontinuityTime
OBJECT-TYPE
The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 or Counter64 suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.6TimeStampread-onlycurrent
mplsOutSegmentIndexNext
OBJECT-TYPE
This object contains the next appropriate value to be used for mplsOutSegmentIndex when creating entries in the mplsOutSegmentTable. If the number of unassigned entries is exhausted, this object will take on the value of 0. To obtain the mplsOutSegmentIndex value for a new entry, the manager must first issue a management protocol retrieval operation to obtain the current value of this object. The agent should modify the value to reflect the next unassigned index after each retrieval operation. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.5Unsigned32 (0..4294967295)read-onlycurrent
mplsOutSegmentTable
OBJECT-TYPE
This table contains a representation of the outgoing segments from an LSR.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6not-accessiblecurrent
mplsOutSegmentEntry
OBJECT-TYPE
An entry in this table represents one outgoing segment. An entry can be created by a network administrator or an SNMP agent, or an MPLS signaling protocol. The object mplsOutSegmentOwner indicates the creator of this entry. The value of mplsOutSegmentRowStatus cannot be active(1)unless the ifTable entry corresponding to mplsOutSegmentIfIndex exists.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1not-accessiblecurrent
mplsOutSegmentIndex
OBJECT-TYPE
This value contains a unique index for this row. While a value of 0 is not valid as an index for this row it can be supplied as a valid value to index mplsXCTable to access entries for which no out- segment has been configured.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.1Unsigned32 (0..2147483647)not-accessiblecurrent
mplsOutSegmentIfIndex
OBJECT-TYPE
This value must contain the interface index of the outgoing interface. This object may only take the value of 0 during the create-and-wait row creation operation if the management station has not yet set the value of this object. This object cannot be modified if mplsOutSegmentRowStatus is active(1). The mplsOutSegmentRowStatus cannot be set to active(1) until this object is set to a value corresponding to a valid ifEntry.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.2InterfaceIndexOrZeroread-createcurrent
mplsOutSegmentPushTopLabel
OBJECT-TYPE
This value indicates whether or not a top label should be pushed onto the outgoing packet's label stack. The value of this variable MUST be set to true if the outgoing interface does not support pop- and-go (for example an ATM interface) or if it is a tunnel origination. Note that it is considered an error in the case that mplsOutSegmentPushTopLabel is set to false, but the cross-connect entry which refers to this out-segment has a non-zero mplsLabelStackIndex. The LSR MUST ensure that this situation does not happen. This object cannot be modified if mplsOutSegmentRowStatus is active(1).
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.3TruthValueread-createcurrent
mplsOutSegmentTopLabel
OBJECT-TYPE
If mplsOutSegmentPushTopLabel is true then this represents the label that should be pushed onto the top of the outgoing packet's label stack. Otherwise this value SHOULD be set to 0 by the management station and MUST be ignored by the agent. This object cannot be modified if mplsOutSegmentRowStatus is active(1).
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.4MplsLabelread-createcurrent
mplsOutSegmentNextHopIpAddrType
OBJECT-TYPE
Indicates whether the next hop address is IPv4 or IPv6. Note that a value of unknown (0) is valid only when the outgoing interface is of type point-to- point. This object cannot be modified if mplsOutSegmentRowStatus is active(1).
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.5InetAddressTyperead-createcurrent
mplsOutSegmentNextHopIpv4Addr
OBJECT-TYPE
IPv4 Address of the next hop. Its value is significant only when mplsOutSegmentNextHopIpAddrType is ipV4 (1), otherwise it SHOULD return a value of 0. This object cannot be modified if mplsOutSegmentRowStatus is active(1).
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.6InetAddressIPv4read-createcurrent
mplsOutSegmentNextHopIpv6Addr
OBJECT-TYPE
IPv6 address of the next hop. Its value is significant only when mplsOutSegmentNextHopIpAddrType is ipV6 (2), otherwise it SHOULD return a value of 0. This object cannot be modified if mplsOutSegmentRowStatus is active(1).
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.7InetAddressIPv6read-createcurrent
mplsOutSegmentXCIndex
OBJECT-TYPE
Index into mplsXCTable which identifies which cross- connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any cross-connect entry. When a cross-connect entry is created which this out-segment is a part of, this object is automatically updated to reflect the value of mplsXCIndex of that cross-connect entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.8Unsigned32 (0..4294967295)read-onlycurrent
mplsOutSegmentOwner
OBJECT-TYPE
Denotes the entity which created and is responsible for managing this segment. This object cannot be modified if mplsOutSegmentRowStatus is active(1).
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.9MplsInitialCreationSourceread-createcurrent
mplsOutSegmentTrafficParamPtr
OBJECT-TYPE
This variable represents a pointer to the traffic parameter specification for this out-segment. This value may point at an entry in the mplsTrafficParamTable to indicate which mplsTrafficParamEntry is to be assigned to this segment. This value may optionally point at an externally defined traffic parameter specification table. A value of zero-dot-zero indicates best- effort treatment. By having the same value of this object, two or more segments can indicate resource sharing. This object cannot be modified if mplsOutSegmentRowStatus is active(1).
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.10RowPointerread-createcurrent
mplsOutSegmentRowStatus
OBJECT-TYPE
For creating, modifying, and deleting this row.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.11RowStatusread-createcurrent
mplsOutSegmentStorageType
OBJECT-TYPE
This variable indicates the storage type for this object. This object cannot be modified if mplsOutSegmentRowStatus is active(1). If this variable is set to readOnly(5), and the corresponding TFIB entry is removed, then the agent must remove this row shortly thereafter.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.12StorageTyperead-createcurrent
mplsOutSegmentPerfTable
OBJECT-TYPE
This table contains statistical information about outgoing segments from an LSR. The counters in this entry should behave in a manner similar to that of the interface.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7not-accessiblecurrent
mplsOutSegmentPerfEntry
OBJECT-TYPE
An entry in this table contains statistical information about one outgoing segment configured in mplsOutSegmentTable.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1not-accessiblecurrent
mplsOutSegmentOctets
OBJECT-TYPE
This value contains the total number of octets sent on this segment.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.1Counter32read-onlycurrent
mplsOutSegmentPackets
OBJECT-TYPE
This value contains the total number of packets sent on this segment.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.2Counter32read-onlycurrent
mplsOutSegmentErrors
OBJECT-TYPE
Number of packets that could not be sent due to errors on this segment.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.3Counter32read-onlycurrent
mplsOutSegmentDiscards
OBJECT-TYPE
The number of labeled packets received on this out- segment, which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a labeled packet could be to free up buffer space.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.4Counter32read-onlycurrent
mplsOutSegmentHCOctets
OBJECT-TYPE
Total number of octets sent. This is the 64 bit version of mplsOutSegmentOctets.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.5Counter64read-onlycurrent
mplsOutSegmentPerfDiscontinuityTime
OBJECT-TYPE
The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 or Counter64 suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.6TimeStampread-onlycurrent
mplsXCIndexNext
OBJECT-TYPE
This object contains an appropriate value to be used for mplsXCIndex when creating entries in the mplsXCTable. The value 0 indicates that no unassigned entries are available. To obtain the value of mplsXCIndex for a new entry in the mplsXCTable, the manager issues a management protocol retrieval operation to obtain the current value of mplsXCIndex. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.8Unsigned32 (0..4294967295)read-onlycurrent
mplsXCTable
OBJECT-TYPE
This table specifies information for switching between LSP segments. It supports point-to-point, point-to-multipoint and multipoint-to-point connections. mplsLabelStackTable specifies the label stack information for a cross-connect LSR and is referred to from mplsXCTable.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9not-accessiblecurrent
mplsXCEntry
OBJECT-TYPE
A row in this table represents one cross-connect entry. The following objects index it: - cross-connect index mplsXCIndex that uniquely identifies a group of cross-connect entries - interface index of the in-segment, mplsInSegmentIfIndex - incoming label(s), mplsInSegmentLabel - out-segment index, mplsOutSegmentIndex Originating LSPs: These are represented by using the special combination of values mplsInSegmentIfIndex=0 and mplsInSegmentLabel=0 as indexes. In this case the mplsOutSegmentIndex MUST be non-zero. Terminating LSPs: These are represented by using the special value mplsOutSegmentIndex=0 as index. Special labels: Entries indexed by reserved MPLS label values 0 through 15 imply terminating LSPs and MUST have mplsOutSegmentIfIndex = 0. Note that situations where LSPs are terminated with incoming label equal to 0, should have mplsInSegmentIfIndex = 0 as well, but can be distinguished from originating LSPs because the mplsOutSegmentIfIndex = 0. The mplsOutSegmentIfIndex MUST only be set to 0 in cases of terminating LSPs. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signaling protocol.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1not-accessiblecurrent
mplsXCIndex
OBJECT-TYPE
Primary index for the conceptual row identifying a group of cross-connect segments.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
mplsXCLspId
OBJECT-TYPE
This value identifies the label switched path that this cross-connect entry belongs to. This object cannot be modified if mplsXCRowStatus is active(1).
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.2MplsLSPIDread-createcurrent
mplsXCLabelStackIndex
OBJECT-TYPE
Primary index into mplsLabelStackTable identifying a stack of labels to be pushed beneath the top label. Note that the top label identified by the out- segment ensures that all the components of a multipoint-to-point connection have the same outgoing label. A value of 0 indicates that no labels are to be stacked beneath the top label. This object cannot be modified if mplsXCRowStatus is active(1).
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.3Unsigned32 (0..4294967295)read-createcurrent
mplsXCIsPersistent
OBJECT-TYPE
Denotes whether or not this cross-connect entry and associated in- and out-segments should be restored automatically after failures. This value MUST be set to false in cases where this cross-connect entry was created by a signaling protocol. This object cannot be modified if mplsXCRowStatus is active(1).
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.4TruthValueread-createcurrent
mplsXCOwner
OBJECT-TYPE
Denotes the entity that created and is responsible for managing this cross-connect. This object cannot be modified if mplsXCRowStatus is active(1).
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.5MplsInitialCreationSourceread-createcurrent
mplsXCRowStatus
OBJECT-TYPE
For creating, modifying, and deleting this row.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.6RowStatusread-createcurrent
mplsXCStorageType
OBJECT-TYPE
Defines the storage type for this object. This object cannot be modified if mplsXCRowStatus is active(1). If this variable is set to readOnly(5), and the corresponding TFIB entry is removed, then the agent must remove this row shortly thereafter.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.7StorageTyperead-createcurrent
mplsXCAdminStatus
OBJECT-TYPE
The desired operational status of this segment.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.8INTEGER {up(1), down(2), testing(3)}read-createcurrent
mplsXCOperStatus
OBJECT-TYPE
The actual operational status of this cross- connect.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.9INTEGER {up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), lowerLayerDown(7)}read-onlycurrent
mplsMaxLabelStackDepth
OBJECT-TYPE
The maximum stack depth supported by this LSR.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.10Integer32 (1..2147483647)read-onlycurrent
mplsLabelStackIndexNext
OBJECT-TYPE
This object contains an appropriate value to be used for mplsLabelStackIndex when creating entries in the mplsLabelStackTable. The value 0 indicates that no unassigned entries are available. To obtain an mplsLabelStackIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.11Unsigned32 (0..4294967295)read-onlycurrent
mplsLabelStackTable
OBJECT-TYPE
This table specifies the label stack to be pushed onto a packet, beneath the top label. Entries into this table are referred to from mplsXCTable.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12not-accessiblecurrent
mplsLabelStackEntry
OBJECT-TYPE
An entry in this table represents one label which is to be pushed onto an outgoing packet, beneath the top label. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signaling protocol.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1not-accessiblecurrent
mplsLabelStackIndex
OBJECT-TYPE
Primary index for this row identifying a stack of labels to be pushed on an outgoing packet, beneath the top label.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
mplsLabelStackLabelIndex
OBJECT-TYPE
Secondary index for this row identifying one label of the stack. Note that an entry with a smaller mplsLabelStackLabelIndex would refer to a label higher up the label stack and would be popped at a downstream LSR before a label represented by a higher mplsLabelStackLabelIndex at a downstream LSR.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.2Unsigned32 (1..2147483647)not-accessiblecurrent
mplsLabelStackLabel
OBJECT-TYPE
The label to pushed.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.3MplsLabelread-createcurrent
mplsLabelStackRowStatus
OBJECT-TYPE
For creating, modifying, and deleting this row.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.4RowStatusread-createcurrent
mplsLabelStackStorageType
OBJECT-TYPE
Defines the storage type for this object. If this variable is set to readOnly(5), and the corresponding TFIB entry is removed, then the agent must remove this row shortly thereafter.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.5StorageTyperead-createcurrent
mplsTrafficParamIndexNext
OBJECT-TYPE
This object contains an appropriate value which will be used for mplsTrafficParamIndex when creating entries in the mplsTrafficParamTable. The value 0 indicates that no unassigned entries are available. To obtain the mplsTrafficParamIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.13Unsigned32 (0..4294967295)read-onlycurrent
mplsTrafficParamTable
OBJECT-TYPE
This table specifies the Traffic Parameter objects for in and out-segments.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14not-accessiblecurrent
mplsTrafficParamEntry
OBJECT-TYPE
An entry in this table represents the TrafficParam objects for one or more in or out segments. A single entry can be pointed to by multiple segments indicating resource sharing.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1not-accessiblecurrent
mplsTrafficParamIndex
OBJECT-TYPE
Uniquely identifies this row of the table. Note that zero represents an invalid index.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
mplsTrafficParamMaxRate
OBJECT-TYPE
Maximum rate in kilobits/second.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.2MplsBitRateread-createcurrent
mplsTrafficParamMeanRate
OBJECT-TYPE
Mean rate in kilobits/second.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.3MplsBitRateread-createcurrent
mplsTrafficParamMaxBurstSize
OBJECT-TYPE
Maximum burst size in bytes.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.4MplsBurstSizeread-createcurrent
mplsTrafficParamRowStatus
OBJECT-TYPE
For creating, modifying, and deleting this row.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.5RowStatusread-createcurrent
mplsTrafficParamStorageType
OBJECT-TYPE
The storage type for this object. If this variable is set to readOnly(5), and the corresponding TFIB entry is removed, then the agent must remove this row shortly thereafter.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.6StorageTyperead-createcurrent
mplsXCTrapEnable
OBJECT-TYPE
If this object is set to true(1), then it enables the emission of mplsXCUp and mplsXCDown notifications; otherwise these notifications are not emitted.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.15TruthValueread-writecurrent
mplsLsrNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.2
mplsLsrNotifyPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.2.0
mplsLsrConformance
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3
mplsLsrGroups
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1
mplsLsrCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.2

Notifications

NameOIDStatus
mplsXCUp
NOTIFICATION-TYPE
This notification is generated when the mplsXCOperStatus object for one or more contiguous entries in mplsXCTable are about to enter the up(1) state from some other. The included values of mplsXCOperStatus MUST both be set equal to this other state. The two instances of mplsXCOperStatus in this notification indicate the range of indexes that are affected. Note that all the indexes of the two ends of the range can be derived from the instance identifiers of these two objects. For cases where a contiguous range of cross-connects have transitioned into the up(1) state at roughly the same time, the device SHOULD issue a single notification for each range of contiguous indexes in an effort to minimize the emission of a large number of notifications. If a notification has to be issued for just a single cross-connect entry, then the instance identifier (and values) of the two mplsXCOperStatus objects MUST be the identical.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.2.0.1current
mplsXCDown
NOTIFICATION-TYPE
This notification is generated when the mplsXCOperStatus object for one or more contiguous entries in mplsXCTable are about to enter the down(2) state from some other. The included values of mplsXCOperStatus MUST both be set equal to this other state. The two instances of mplsXCOperStatus in this notification indicate the range of indexes that are affected. Note that all the indexes of the two ends of the range can be derived from the instance identifiers of these two objects. For cases where a contiguous range of cross-connects have transitioned into the down(2) state at roughly the same time, the device SHOULD issue a single notification for each range of contiguous indexes in an effort to minimize the emission of a large number of notifications. If a notification has to be issued for just a single cross-connect entry, then the instance identifier (and values) of the two mplsXCOperStatus objects MUST be the identical.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.2.0.2current

Conformance

NameOIDStatus
mplsInterfaceGroup
OBJECT-GROUP
Collection of objects needed for MPLS interface configuration and performance information.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.1current
mplsInSegmentGroup
OBJECT-GROUP
Collection of objects needed to implement an in- segment.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.2current
mplsOutSegmentGroup
OBJECT-GROUP
Collection of objects needed to implement an out- segment.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.3current
mplsXCGroup
OBJECT-GROUP
Collection of objects needed to implement a cross-connect entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.4current
mplsXCOptionalGroup
OBJECT-GROUP
Collection of optional objects for implementing a cross-connect entry.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.5current
mplsPerfGroup
OBJECT-GROUP
Collection of objects providing performance information about an LSR.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.6current
mplsHCInSegmentPerfGroup
OBJECT-GROUP
Object(s) providing performance information specific to out-segments for which the object mplsInterfaceInOctets wraps around too quickly.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.7current
mplsHCOutSegmentPerfGroup
OBJECT-GROUP
Object(s) providing performance information specific to out-segments for which the object mplsInterfaceOutOctets wraps around too quickly.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.8current
mplsTrafficParamGroup
OBJECT-GROUP
Object(s) required for supporting QoS resource reservation.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.9current
mplsXCIsPersistentGroup
OBJECT-GROUP
Objects needed to support persistent cross- connects.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.10current
mplsXCIsNotPersistentGroup
OBJECT-GROUP
Objects needed to support non-persistent cross- connects.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.11current
mplsLabelStackGroup
OBJECT-GROUP
Objects needed to support label stacking.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.12current
mplsSegmentDiscontinuityGroup
OBJECT-GROUP
A collection of objects providing information specific to segment discontinuities..
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.13current
mplsLsrNotificationGroup
NOTIFICATION-GROUP
Set of notifications implemented in this module. None is mandatory.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.14current
mplsLsrModuleCompliance
MODULE-COMPLIANCE
Compliance statement for agents that support the MPLS LSR MIB.
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.2.1current