HH3C-STORAGE-SNAP-MIB
- Registered at
- 1.3.6.1.4.1.25506.10.2
- Last updated
- 2007-09-14 14:52
- Organization
- New H3C Technologies Co., Ltd.
- Namespace
- comware
- Source file
HH3C-STORAGE-SNAP-MIB- Digest
sha256:f1f8d3996646106f5b9afbb3716cb30916bfda25f3b65a688d20433fa80270dd
Description
This MIB describes the general information about snap of storage device.
Contact
Platform Team New H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R. China Http://www.h3c.com Zip:100085
Imports
| From | Symbols |
|---|---|
| ENTITY-MIB | entPhysicalIndex |
| HH3C-STORAGE-REF-MIB | Hh3cExtendSelectPolicy, Hh3cLvIDType, Hh3cRaidIDType, Hh3cStorageActionType, Hh3cStorageEnableState, Hh3cStorageOnlineState, hh3cStorageRef |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DateAndTime, DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ENTITY-MIB HH3C-OID-MIB HH3C-STORAGE-REF-MIB HH3C-STORAGE-SNAP-MIB IANA-ENTITY-MIB INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC UUID-TC-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hh3cSnapMibObjects OBJECT-IDENTITY | 1.3.6.1.4.1.25506.10.2.1 | |||
| hh3cGlobalSnapSettingsObject OBJECT-IDENTITY | 1.3.6.1.4.1.25506.10.2.1.1 | |||
| hh3cAddtionalSpaceMaxSize OBJECT-TYPE This object identifies the maximal size of snapshot resource, safecache, and Continued replication Resource . | 1.3.6.1.4.1.25506.10.2.1.1.1 | Integer32 | read-only | current |
| hh3cSnapConfigTable OBJECT-TYPE This table contains some entity to config the snapshot resources for special logic volumes. | 1.3.6.1.4.1.25506.10.2.1.2 | not-accessible | current | |
| hh3cSnapConfigEntry OBJECT-TYPE An entry containing configuration about the snapshot resource. | 1.3.6.1.4.1.25506.10.2.1.2.1 | not-accessible | current | |
| hh3cSnapLvIndex OBJECT-TYPE This object identifies the index of hh3cSnapConfigTable. The object identified by this index is the same object as identified by the same value of hh3cLvIndex. | 1.3.6.1.4.1.25506.10.2.1.2.1.1 | Hh3cLvIDType | not-accessible | current |
| hh3cSnapAreaId OBJECT-TYPE This object identifies the snapshot resource of the logic volume. | 1.3.6.1.4.1.25506.10.2.1.2.1.2 | Hh3cLvIDType | read-only | current |
| hh3cSnapAreaAutoExpand OBJECT-TYPE This object describes if the space of snapshot resource can be expanded automatically. | 1.3.6.1.4.1.25506.10.2.1.2.1.3 | Hh3cStorageEnableState | read-create | current |
| hh3cSnapAreaThreshold OBJECT-TYPE If hh3cSnapAreaAutoExpand is selected, the 'hh3cSnapAreaThreshold' means the threshold of the snapshot resource. | 1.3.6.1.4.1.25506.10.2.1.2.1.4 | Integer32 (0..100) | read-create | current |
| hh3cSnapAreaIncSize OBJECT-TYPE If hh3cSnapAreaAutoExpand is selected, the 'hh3cSnapAreaIncSize' means the amount of space to be allocated for each expansion. | 1.3.6.1.4.1.25506.10.2.1.2.1.5 | Integer32 | read-create | current |
| hh3cSnapAreaMaxSize OBJECT-TYPE If hh3cSnapAreaAutoExpand is selected, the 'hh3cSnapAreaIncSize' means the max size of snapshot resource. | 1.3.6.1.4.1.25506.10.2.1.2.1.6 | Integer32 | read-create | current |
| hh3cSnapAreaFullDeleteTM OBJECT-TYPE This object identifies if the snapshot resource is out of space and expand failed, if the system delete the old timemark until enough space or not. | 1.3.6.1.4.1.25506.10.2.1.2.1.7 | INTEGER {rotative(1), none(2)} | read-create | current |
| hh3cSnapAreaNotify OBJECT-TYPE This object describes if a snapshot notification should be send to the client when the system create a timemark. | 1.3.6.1.4.1.25506.10.2.1.2.1.8 | Hh3cStorageEnableState | read-create | current |
| hh3cSnapAreaStatus OBJECT-TYPE This object describes the state of the snapshot resource. | 1.3.6.1.4.1.25506.10.2.1.2.1.9 | Hh3cStorageOnlineState | read-only | current |
| hh3cSnapRaidUuid OBJECT-TYPE This object describes the raid where the snapshot resource is created. | 1.3.6.1.4.1.25506.10.2.1.2.1.10 | Hh3cRaidIDType | read-create | current |
| hh3cSnapRaidSize OBJECT-TYPE This object describes the size designated when the snapshot resource is created. | 1.3.6.1.4.1.25506.10.2.1.2.1.11 | Integer32 | read-only | current |
| hh3cSnapRaidSelectPolicy OBJECT-TYPE This object describes the policy when the snapshot resource is created automatically. Note that the value can not be 'none' when the value of associated hh3cSnapRaidUuid object is equal to null. | 1.3.6.1.4.1.25506.10.2.1.2.1.12 | Hh3cExtendSelectPolicy | read-create | current |
| hh3cSnapAreaTotalSize OBJECT-TYPE This object identifies the current total size of the snapshot resource. | 1.3.6.1.4.1.25506.10.2.1.2.1.13 | Integer32 | read-only | current |
| hh3cSnapAreaFreeSize OBJECT-TYPE This object identifies the free size of the snapshot resource. | 1.3.6.1.4.1.25506.10.2.1.2.1.14 | Integer32 | read-only | current |
| hh3cSnapExtendTimes OBJECT-TYPE This object identifies the times the snapshot resource extended. | 1.3.6.1.4.1.25506.10.2.1.2.1.15 | Integer32 | read-only | current |
| hh3cSnapRowStatus OBJECT-TYPE This object identifies the action of snapshot resource. Note that the assocai snapshot resource can not be delete when a snapshot copy is processing or the TimeMark is enabled, or the replication is enabled. | 1.3.6.1.4.1.25506.10.2.1.2.1.16 | RowStatus | read-create | current |
| hh3cSnapExpandTable OBJECT-TYPE This table contains some entity to expand a snapshot resource. | 1.3.6.1.4.1.25506.10.2.1.3 | not-accessible | current | |
| hh3cSnapExpandEntry OBJECT-TYPE An entry containing expand information applicable to the snapshot resource. | 1.3.6.1.4.1.25506.10.2.1.3.1 | not-accessible | current | |
| hh3cSAExpRaidUuid OBJECT-TYPE This index is identical to hh3cRaidUuid in HH3C-RAID-MIB. | 1.3.6.1.4.1.25506.10.2.1.3.1.1 | Hh3cRaidIDType | not-accessible | current |
| hh3cSAExpSize OBJECT-TYPE This object describes the increased size for snapshot resource when expanded. The units is million bytes. The value is always equal to zero when read. | 1.3.6.1.4.1.25506.10.2.1.3.1.2 | Integer32 | read-create | current |
| hh3cSAExpRaidSize OBJECT-TYPE This object describes the size for snapshot resource on the raid. The units is million bytes. The value is always equal to zero when read. | 1.3.6.1.4.1.25506.10.2.1.3.1.3 | Integer32 | read-only | current |
| hh3cSnapAreaExpRowStatus OBJECT-TYPE This object describes the actions to expand the size for snap. | 1.3.6.1.4.1.25506.10.2.1.3.1.4 | RowStatus | read-create | current |
| hh3cSnapCopyTable OBJECT-TYPE This table contains some entity about snapshot copy. | 1.3.6.1.4.1.25506.10.2.1.4 | not-accessible | current | |
| hh3cSnapCopyEntry OBJECT-TYPE An entry containing snapshot copy information applicable. | 1.3.6.1.4.1.25506.10.2.1.4.1 | not-accessible | current | |
| hh3cSnapCopyLvIndex OBJECT-TYPE This object identifies the index of destination logic volume for snapshot copy. | 1.3.6.1.4.1.25506.10.2.1.4.1.1 | Hh3cLvIDType | read-write | current |
| hh3cSnapCopyPercentage OBJECT-TYPE This object identifies the percentage of snapshot copy. The value is equal to zero if the snapshot copy has not started. When finished, the value is always equal to '100'. | 1.3.6.1.4.1.25506.10.2.1.4.1.2 | Integer32 (0..100) | read-only | current |
| hh3cSnapCopyStartTime OBJECT-TYPE This object identifies the time to start the snapshot copy. | 1.3.6.1.4.1.25506.10.2.1.4.1.3 | DateAndTime | read-only | current |
| hh3cSnapCopySwitch OBJECT-TYPE This object describes the actions to start or stop the snapshot copy. When read, the value of 'none' will be get. Note that if the snapshot resource of source logic volume has not been created, the action of snapshot copy will be refused by agent. | 1.3.6.1.4.1.25506.10.2.1.4.1.4 | INTEGER {start(1), stop(2), none(3)} | read-write | current |
| hh3cTimeMarkConfigTable OBJECT-TYPE This table contains some entity to config a TimeMark on a special logic volume. | 1.3.6.1.4.1.25506.10.2.1.5 | not-accessible | current | |
| hh3cTimeMarkConfigEntry OBJECT-TYPE An entry containing config information applicable to the TimeMark. | 1.3.6.1.4.1.25506.10.2.1.5.1 | not-accessible | current | |
| hh3cTimeMarkCounts OBJECT-TYPE This object identifies the max num of TimeMark which can be configed. | 1.3.6.1.4.1.25506.10.2.1.5.1.1 | Integer32 (1..255) | read-write | current |
| hh3cTimeMarkInitializeTime OBJECT-TYPE This object identifies the date and time when the first TimeMark is created on the logic volume. | 1.3.6.1.4.1.25506.10.2.1.5.1.2 | DateAndTime | read-write | current |
| hh3cTimeMarkInterval OBJECT-TYPE This object identifies the interval when the TimeMark is created automatically if the value of this object is not equal to zero. The units is second. the min value is 10 seconds. | 1.3.6.1.4.1.25506.10.2.1.5.1.3 | Integer32 | read-write | current |
| hh3cTimeMarkLastTime OBJECT-TYPE This object identifies the date and time when the latest TimeMark is created on the logic volume. | 1.3.6.1.4.1.25506.10.2.1.5.1.4 | DateAndTime | read-write | current |
| hh3cTimeMarkTotal OBJECT-TYPE This object identifies the current num of TimeMark. | 1.3.6.1.4.1.25506.10.2.1.5.1.5 | Integer32 | read-only | current |
| hh3cTimeMarkSwitch OBJECT-TYPE This object describes enable or disable TimeMark. | 1.3.6.1.4.1.25506.10.2.1.5.1.6 | Hh3cStorageEnableState | read-create | current |
| hh3cTimeMarkCreateTable OBJECT-TYPE This table contains some entity to create a TimeMark on a special logic volume. | 1.3.6.1.4.1.25506.10.2.1.6 | not-accessible | current | |
| hh3cTimeMarkCreateEntry OBJECT-TYPE An entry containing create information applicable to the TimeMark. | 1.3.6.1.4.1.25506.10.2.1.6.1 | not-accessible | current | |
| hh3cTimeMarkStamp OBJECT-TYPE This object identifies the date and time the TimeMark is created. | 1.3.6.1.4.1.25506.10.2.1.6.1.1 | DateAndTime | not-accessible | current |
| hh3cTimeMarkComment OBJECT-TYPE This object identifies the comment of the TimeMark. | 1.3.6.1.4.1.25506.10.2.1.6.1.2 | OCTET STRING | read-only | current |
| hh3cTimeMarkSize OBJECT-TYPE This object identifies the current size of the TimeMark. | 1.3.6.1.4.1.25506.10.2.1.6.1.3 | Integer32 | read-only | current |
| hh3cTimeMarkRowStatus OBJECT-TYPE This object identifies the action to create or delete the TimeMark. Note that the TimeMark can not be deleted if it is using. | 1.3.6.1.4.1.25506.10.2.1.6.1.4 | RowStatus | read-create | current |
| hh3cTimeMarkCopyTable OBJECT-TYPE This table contains some entity about a TimeMark copy. | 1.3.6.1.4.1.25506.10.2.1.7 | not-accessible | current | |
| hh3cTimeMarkCopyEntry OBJECT-TYPE An entry containing config information applicable to the TimeMark copy. | 1.3.6.1.4.1.25506.10.2.1.7.1 | not-accessible | current | |
| hh3cTMCopyDestLvId OBJECT-TYPE This object identifies the index of destination logic volume for TimeMark copy. | 1.3.6.1.4.1.25506.10.2.1.7.1.1 | Hh3cLvIDType | read-only | current |
| hh3cTMCopyPercentage OBJECT-TYPE This object identifies the percentage of TimeMark copy. The value is equal to zero if the TimeMark copy has not started. When finished, the value is always equal to '100'. | 1.3.6.1.4.1.25506.10.2.1.7.1.2 | Integer32 (0..100) | read-only | current |
| hh3cTMCopyStartTime OBJECT-TYPE This object identifies the time to start the TimeMark copy. | 1.3.6.1.4.1.25506.10.2.1.7.1.3 | DateAndTime | read-only | current |
| hh3cTMCopySwitch OBJECT-TYPE This object describes the actions to start or stop the TimeMark copy. When read, the value of 'none' will be get. | 1.3.6.1.4.1.25506.10.2.1.7.1.4 | INTEGER {start(1), stop(2), none(3)} | read-write | current |
| hh3cTimeMarkRollbackTable OBJECT-TYPE This table contains some entity to use a TimeMark to rollback the logic volume. | 1.3.6.1.4.1.25506.10.2.1.8 | not-accessible | current | |
| hh3cTimeMarkRollbackEntry OBJECT-TYPE An entry containing config information applicable to use a TimeMark to rollback the logic volume. | 1.3.6.1.4.1.25506.10.2.1.8.1 | not-accessible | current | |
| hh3cTMRollbackPercentage OBJECT-TYPE This object identifies the percentage of rollback. | 1.3.6.1.4.1.25506.10.2.1.8.1.1 | Integer32 (0..100) | read-only | current |
| hh3cTMRollbackStartTime OBJECT-TYPE This object identifies the time to start the rollback. | 1.3.6.1.4.1.25506.10.2.1.8.1.2 | DateAndTime | read-only | current |
| hh3cTMRollbackSwitch OBJECT-TYPE This object describes the actions to use a TimeMark to rollback the logic volume. Note that once you roll back, you cannot roll forward, all the later TimeMark behind it will be deleted. | 1.3.6.1.4.1.25506.10.2.1.8.1.3 | Hh3cStorageActionType | read-write | current |
| hh3cTimeViewTable OBJECT-TYPE This table contains some entity to config a TimeView on a special TimeMark. | 1.3.6.1.4.1.25506.10.2.1.9 | not-accessible | current | |
| hh3cTimeViewEntry OBJECT-TYPE An entry containing config information applicable to the TimeView. | 1.3.6.1.4.1.25506.10.2.1.9.1 | not-accessible | current | |
| hh3cTimeViewStamp OBJECT-TYPE This object identifies the TimeView. The object identified by this index is the same object as identified by the same value of hh3cTimeMarkStamp. | 1.3.6.1.4.1.25506.10.2.1.9.1.1 | DateAndTime | not-accessible | current |
| hh3cTimeViewID OBJECT-TYPE This object identifies the TimeView. | 1.3.6.1.4.1.25506.10.2.1.9.1.2 | Hh3cLvIDType | read-only | current |
| hh3cTimeViewName OBJECT-TYPE This object identifies the name of the TimeView. | 1.3.6.1.4.1.25506.10.2.1.9.1.3 | OCTET STRING | read-create | current |
| hh3cTimeViewRowStatus OBJECT-TYPE This object describes the actions to create or delete the TimeView. | 1.3.6.1.4.1.25506.10.2.1.9.1.4 | RowStatus | read-create | current |
| hh3cReplicaConfigTable OBJECT-TYPE This table contains some entity to config replication for a logic volume. | 1.3.6.1.4.1.25506.10.2.1.10 | not-accessible | current | |
| hh3cReplicaConfigEntry OBJECT-TYPE An entry containing config information applicable to the replication for a logic volume. | 1.3.6.1.4.1.25506.10.2.1.10.1 | not-accessible | current | |
| hh3cRepLocalLvIndex OBJECT-TYPE This object identifies the local logic volume that is related with replication. The object identified by this index is the same object as identified by the same value of hh3cSnapLvIndex. | 1.3.6.1.4.1.25506.10.2.1.10.1.1 | Hh3cLvIDType | not-accessible | current |
| hh3cLvRepLocalWay OBJECT-TYPE The value of 'outgoing' means the hh3cRepLocalLvIndex is the primary logic volume of replication, and the hh3cRepRemoteLvIndex is the replica logic volume. The value of 'incoming' means the hh3cRepLocalLvIndex is the replica logic volume of replication. , and the hh3cRepRemoteLvIndex is the primary logic volume. | 1.3.6.1.4.1.25506.10.2.1.10.1.2 | INTEGER {outgoing(1), incoming(2)} | read-only | current |
| hh3cRepLocalServerIP OBJECT-TYPE This object identifies the ip address of local server. | 1.3.6.1.4.1.25506.10.2.1.10.1.3 | InetAddress | read-create | current |
| hh3cRepLocalServerIPType OBJECT-TYPE This object identifies the ip address type of local server. | 1.3.6.1.4.1.25506.10.2.1.10.1.4 | InetAddressType | read-create | current |
| hh3cRepLocalServerName OBJECT-TYPE This object identifies the name of local server. | 1.3.6.1.4.1.25506.10.2.1.10.1.5 | OCTET STRING | read-only | current |
| hh3cRepLocalServerUsername OBJECT-TYPE This object identifies the username of local server. | 1.3.6.1.4.1.25506.10.2.1.10.1.6 | OCTET STRING (SIZE(1..32)) | read-create | current |
| hh3cRepLocalServerPassword OBJECT-TYPE This object identifies the password of local server. | 1.3.6.1.4.1.25506.10.2.1.10.1.7 | OCTET STRING (SIZE(1..127)) | read-create | current |
| hh3cRepRemoteServerIP OBJECT-TYPE This object identifies the ip address of remote server. | 1.3.6.1.4.1.25506.10.2.1.10.1.8 | InetAddress | read-create | current |
| hh3cRepRemoteServerIPType OBJECT-TYPE This object identifies the ip address type of remote server. | 1.3.6.1.4.1.25506.10.2.1.10.1.9 | InetAddressType | read-create | current |
| hh3cRepRemoteServerName OBJECT-TYPE This object identifies the name of remote server. | 1.3.6.1.4.1.25506.10.2.1.10.1.10 | OCTET STRING | read-only | current |
| hh3cRepRemoteServerUsername OBJECT-TYPE This object identifies the username of remote server. | 1.3.6.1.4.1.25506.10.2.1.10.1.11 | OCTET STRING (SIZE(1..32)) | read-create | current |
| hh3cRepRemoteServerPassword OBJECT-TYPE This object identifies the password of remote server. | 1.3.6.1.4.1.25506.10.2.1.10.1.12 | OCTET STRING (SIZE(1..127)) | read-create | current |
| hh3cRepRemoteLvIndex OBJECT-TYPE This object identifies the logic volume of remote server. | 1.3.6.1.4.1.25506.10.2.1.10.1.13 | Hh3cLvIDType | read-create | current |
| hh3cReplicaMode OBJECT-TYPE This object identifies the replication mode: The value of 'adaptive' means that data from the primary resource is continuously replicated to a replica resource unless the system determines it is not practical or possible. The value of 'remote' means that a snapshot is taken of the primary resource at prescribed intervals based on the criteria you set (schedule and/or watermark value). Note that the associated Continuous Replication Resource can not be created if the value of this boject is not equal to 'adaptive'. | 1.3.6.1.4.1.25506.10.2.1.10.1.14 | INTEGER {adaptive(1), remote(2), none(3)} | read-create | current |
| hh3cReplicaWatermark OBJECT-TYPE This object identifies the size of watermark which means a replication is scheduled. | 1.3.6.1.4.1.25506.10.2.1.10.1.15 | Integer32 | read-create | current |
| hh3cReplicaWatermarkRetry OBJECT-TYPE If the 'hh3cReplicaWatermark' is set, This object identifies the interval time to retry if the last replication is failed. The units is minute. | 1.3.6.1.4.1.25506.10.2.1.10.1.16 | Integer32 | read-create | current |
| hh3cReplicaInitializeTime OBJECT-TYPE This object identifies the time to start an initial replication. | 1.3.6.1.4.1.25506.10.2.1.10.1.17 | DateAndTime | read-create | current |
| hh3cReplicaInterval OBJECT-TYPE This object identifies how often the replication should be repeated after initial replication. The units is minute. | 1.3.6.1.4.1.25506.10.2.1.10.1.18 | Integer32 | read-create | current |
| hh3cReplicaEncrypt OBJECT-TYPE This object identifies the encrypt option is enable or diable. | 1.3.6.1.4.1.25506.10.2.1.10.1.19 | Hh3cStorageEnableState | read-create | current |
| hh3cReplicaCompress OBJECT-TYPE This object identifies the compress option is enable or diable. | 1.3.6.1.4.1.25506.10.2.1.10.1.20 | Hh3cStorageEnableState | read-create | current |
| hh3cReplicaUseExistTM OBJECT-TYPE This object identifies if using the exist TimeMark to replicate or not. | 1.3.6.1.4.1.25506.10.2.1.10.1.21 | Hh3cStorageEnableState | read-create | current |
| hh3cReplicaProtocol OBJECT-TYPE This object identifies the protocol about replication. The value 'tcp' means Transmission Control Protocol, and 'rudp' means Reliable User Datagram Protocol. | 1.3.6.1.4.1.25506.10.2.1.10.1.22 | INTEGER {tcp(1), rudp(2)} | read-create | current |
| hh3cReplicaScanDiff OBJECT-TYPE This object identifies the system to scan both the primary and replica resource to determine how much data needs to be synchronized. | 1.3.6.1.4.1.25506.10.2.1.10.1.23 | TruthValue | read-create | current |
| hh3cReplicaStatSwitch OBJECT-TYPE This object identifies the action how to operate the replica. When read , a value of 'none' will be get. The value of 'promte' means remove the replication relation and promote the remote copy on the target server. The value of 'sync' means synchronize mannually (force a replication that is not scheduled.) The value of 'scan' means scan the delta data between primary resource and replica resource. The value of 'reversal' means switch the roles of the primary resource and replica resource. The replication configuration is maintained. The primary and replica must be synchronized in order to reverse a replica. The value of 'stop' means stop a replication that is currently in progress. The value of 'suspend' means suspend future replications from automatically being triggered by replication policies (watermark, interval, time). This will not stop a replication that is currently in progress. The value of 'resume' means resume the replication status from suspended to normal. Note that if the action of 'upgrade' is executed successfully, this replica resource will become a normal logic volume, and this entry will be deleted automatically. Note that if the action of 'reversal' is executed successfully, Clients will be disconnected from the former primary resource. | 1.3.6.1.4.1.25506.10.2.1.10.1.24 | INTEGER {promte(1), sync(2), scan(3), reversal(4), stop(5), suspend(6), resume(7), none(8)} | read-create | current |
| hh3cReplicaRowStatus OBJECT-TYPE This object identifies the action to enable or disable the replication. | 1.3.6.1.4.1.25506.10.2.1.10.1.25 | RowStatus | read-create | current |
| hh3cReplicaStateTable OBJECT-TYPE This table contains some entity to show replication state. | 1.3.6.1.4.1.25506.10.2.1.11 | not-accessible | current | |
| hh3cReplicaStateEntry OBJECT-TYPE An entry containing show information applicable to the replication state. | 1.3.6.1.4.1.25506.10.2.1.11.1 | not-accessible | current | |
| hh3cReplicaDelta OBJECT-TYPE This object identifies the size of delta data after last sync. | 1.3.6.1.4.1.25506.10.2.1.11.1.1 | Integer32 | read-only | current |
| hh3cReplicaLastSyncTime OBJECT-TYPE This object identifies the date and time when last sync is taken. | 1.3.6.1.4.1.25506.10.2.1.11.1.2 | DateAndTime | read-only | current |
| hh3cReplicaNextSyncTime OBJECT-TYPE This object identifies the date and time when next sync will be taken. | 1.3.6.1.4.1.25506.10.2.1.11.1.3 | DateAndTime | read-only | current |
| hh3cReplicaSyncTotalSize OBJECT-TYPE This object identifies how much data need to be synchronized to the replica resource for current replication. | 1.3.6.1.4.1.25506.10.2.1.11.1.4 | Integer32 | read-only | current |
| hh3cReplicaSyncCurPercentage OBJECT-TYPE This object identifies how much data has been synchronized to the replica resource for current replication. | 1.3.6.1.4.1.25506.10.2.1.11.1.5 | Integer32 | read-only | current |
| hh3cReplicaSyncPerformance OBJECT-TYPE This object identifies the performance of the synchronize. The unit is MB/s. | 1.3.6.1.4.1.25506.10.2.1.11.1.6 | Integer32 | read-only | current |
| hh3cReplicaRunStatus OBJECT-TYPE This object identifies the state of the replica. | 1.3.6.1.4.1.25506.10.2.1.11.1.7 | INTEGER {suspend(1), idle(2), stop(3), sync(4), scan(5)} | read-only | current |
| hh3cCDRConfigTable OBJECT-TYPE This table contains some entity to config Continuous Replication Resource. | 1.3.6.1.4.1.25506.10.2.1.12 | not-accessible | current | |
| hh3cCDRConfigEntry OBJECT-TYPE An entry containing some information applicable to Continuous Replication Resource of the logic volume. | 1.3.6.1.4.1.25506.10.2.1.12.1 | not-accessible | current | |
| hh3cCDRLvIndex OBJECT-TYPE This object identifies the source logic volume of the Continuous Replication Resource. The object identified by this index is the same object as identified by the same value of hh3cRepLocalLvIndex. Note that an entry of hh3cCDRConfigTable can be created only when the associated hh3cCDRDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated hh3cCDRDistributeTable objects should be deleted automatically. | 1.3.6.1.4.1.25506.10.2.1.12.1.1 | Hh3cLvIDType | not-accessible | current |
| hh3cCDRID OBJECT-TYPE This object identifies the Continuous Replication Resource. | 1.3.6.1.4.1.25506.10.2.1.12.1.2 | Integer32 | read-only | current |
| hh3cCDRStatus OBJECT-TYPE This object identifies the state of the Continuous Replication Resource. | 1.3.6.1.4.1.25506.10.2.1.12.1.3 | Hh3cStorageOnlineState | read-only | current |
| hh3cCDRTotalSize OBJECT-TYPE This object identifies the total size of the Continuous Replication Resource. | 1.3.6.1.4.1.25506.10.2.1.12.1.4 | Integer32 | read-only | current |
| hh3cCDRFreeSize OBJECT-TYPE This object identifies the free size of the Continuous Replication Resource. | 1.3.6.1.4.1.25506.10.2.1.12.1.5 | Integer32 | read-only | current |
| hh3cCDRSelectPolicy OBJECT-TYPE This object describes the policy about allocating the space for Continuous Replication Resource. | 1.3.6.1.4.1.25506.10.2.1.12.1.6 | Hh3cExtendSelectPolicy | read-create | current |
| hh3cCDRRowStatus OBJECT-TYPE This object identifies the action to create or delete the Continuous Replication Resource. | 1.3.6.1.4.1.25506.10.2.1.12.1.7 | RowStatus | read-create | current |
| hh3cCDRDistributeTable OBJECT-TYPE This table contains some entity to config the distribution of Continuous Replication Resource. | 1.3.6.1.4.1.25506.10.2.1.13 | not-accessible | current | |
| hh3cCDRDistributeEntry OBJECT-TYPE An entry containing some information applicable to the distribution of Continuous Replication Resource. | 1.3.6.1.4.1.25506.10.2.1.13.1 | not-accessible | current | |
| hh3cCDRDistLvIndex OBJECT-TYPE This index is identical to hh3cLvIndex in HH3C-LOGIC-VOLUME-MIB. | 1.3.6.1.4.1.25506.10.2.1.13.1.1 | Hh3cLvIDType | not-accessible | current |
| hh3cCDRRaidUuid OBJECT-TYPE This index is identical to hh3cRaidUuid in HH3C-RAID-MIB. | 1.3.6.1.4.1.25506.10.2.1.13.1.2 | Hh3cRaidIDType | not-accessible | current |
| hh3cCDRRaidSize OBJECT-TYPE This object identifies the size on the special raid distributed for the Continuous Replication Resource. | 1.3.6.1.4.1.25506.10.2.1.13.1.3 | Integer32 | read-create | current |
| hh3cCDRExtRowStatus OBJECT-TYPE This object identifies the action to create the distribution for the Continuous Replication Resource. | 1.3.6.1.4.1.25506.10.2.1.13.1.4 | RowStatus | read-create | current |
| hh3cSafeCacheConfigTable OBJECT-TYPE This table contains some entity to config SafeCache. | 1.3.6.1.4.1.25506.10.2.1.14 | not-accessible | current | |
| hh3cSafeCacheConfigEntry OBJECT-TYPE An entry containing some information applicable to SafeCache of the logic volume. | 1.3.6.1.4.1.25506.10.2.1.14.1 | not-accessible | current | |
| hh3cSafeCacheLvIndex OBJECT-TYPE This object identifies the source logic volume of the SafeCache. The object identified by this index is the same object as identified by the same value of hh3cLvindex. Note that an entry of hh3cSafeCacheConfigTable can be created only when the associated hh3cSafeCacheDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated hh3cSafeCacheDistributeTable objects should be deleted automatically. | 1.3.6.1.4.1.25506.10.2.1.14.1.1 | Hh3cLvIDType | not-accessible | current |
| hh3cSafeCacheID OBJECT-TYPE This object identifies a SafeCache. | 1.3.6.1.4.1.25506.10.2.1.14.1.2 | Integer32 | read-only | current |
| hh3cSafeCacheStatus OBJECT-TYPE This object identifies the state of the SafeCache. | 1.3.6.1.4.1.25506.10.2.1.14.1.3 | Hh3cStorageOnlineState | read-only | current |
| hh3cSafeCacheTotalSize OBJECT-TYPE This object identifies the total size of the SafeCache. The units is million bytes. | 1.3.6.1.4.1.25506.10.2.1.14.1.4 | Integer32 | read-only | current |
| hh3cSafeCacheFreeSize OBJECT-TYPE This object identifies the free size of the SafeCache. The units is million bytes. | 1.3.6.1.4.1.25506.10.2.1.14.1.5 | Integer32 | read-only | current |
| hh3cSafeCacheSelectPolicy OBJECT-TYPE This object describes the policy about allocating the space for SafeCache. | 1.3.6.1.4.1.25506.10.2.1.14.1.6 | Hh3cExtendSelectPolicy | read-create | current |
| hh3cSafeCacheThreshold OBJECT-TYPE This object identifies the maximal percentage of date changed before data flushing. | 1.3.6.1.4.1.25506.10.2.1.14.1.7 | Integer32 (0..100) | read-create | current |
| hh3cSafeCacheFlushTime OBJECT-TYPE This object identifies the period during which the date can stay in cache before data flushing. The units is second. | 1.3.6.1.4.1.25506.10.2.1.14.1.8 | Integer32 | read-create | current |
| hh3cSafeCacheFlushCommand OBJECT-TYPE This object identifies the number of commands when data flushing. | 1.3.6.1.4.1.25506.10.2.1.14.1.9 | Integer32 (1..64) | read-create | current |
| hh3cSafeCacheSkipDupWrite OBJECT-TYPE This object identifies skip duplicate write commands or not. | 1.3.6.1.4.1.25506.10.2.1.14.1.10 | INTEGER {enable(1), disable(2)} | read-create | current |
| hh3cSafeCacheRunStatus OBJECT-TYPE This object identifies the run state of the SafeCache. | 1.3.6.1.4.1.25506.10.2.1.14.1.11 | INTEGER {run(1), suspend(2)} | read-only | current |
| hh3cSafeCacheSwitch OBJECT-TYPE This object identifies the action of the SafeCache. The value 'suspend' means suspend the SafeCache. The value 'resume' means resume the SafeCache. | 1.3.6.1.4.1.25506.10.2.1.14.1.12 | INTEGER {suspend(1), resume(2), none(3)} | read-create | current |
| hh3cSafeCacheRowStatus OBJECT-TYPE This object identifies the action to create or delete the SafeCache. | 1.3.6.1.4.1.25506.10.2.1.14.1.13 | RowStatus | read-create | current |
| hh3cSafeCacheDistributeTable OBJECT-TYPE This table contains some entity to config the SafeCache resource. | 1.3.6.1.4.1.25506.10.2.1.15 | not-accessible | current | |
| hh3cSafeCacheDistributeEntry OBJECT-TYPE An entry containing some information applicable to SafeCache resource of the logic volume. | 1.3.6.1.4.1.25506.10.2.1.15.1 | not-accessible | current | |
| hh3cSafeCacheDistLvIndex OBJECT-TYPE This index is identical to hh3cLvIndex in HH3C-LOGIC-VOLUME-MIB. | 1.3.6.1.4.1.25506.10.2.1.15.1.1 | Hh3cLvIDType | not-accessible | current |
| hh3cSafeCacheRaidUuid OBJECT-TYPE This index is identical to hh3cRaidUuid in HH3C-RAID-MIB. | 1.3.6.1.4.1.25506.10.2.1.15.1.2 | Hh3cRaidIDType | not-accessible | current |
| hh3cSafeCacheRaidSize OBJECT-TYPE This object identifies the size on the special raid distributed for the SafeCache resource. | 1.3.6.1.4.1.25506.10.2.1.15.1.3 | Integer32 | read-create | current |
| hh3cSafeCacheExtRowStatus OBJECT-TYPE This object identifies the action to create the distribution for the SafeCache resource. | 1.3.6.1.4.1.25506.10.2.1.15.1.4 | RowStatus | read-create | current |
| hh3cMirrorConfigTable OBJECT-TYPE This table contains some entity to config mirror. | 1.3.6.1.4.1.25506.10.2.1.16 | not-accessible | current | |
| hh3cMirrorConfigEntry OBJECT-TYPE An entry containing some information applicable to mirror for the logic volume. | 1.3.6.1.4.1.25506.10.2.1.16.1 | not-accessible | current | |
| hh3cMirrorLvIndex OBJECT-TYPE This object identifies the source logic volume of the mirror. The object identified by this index is the same object as identified by the same value of hh3cLvindex. Note that an entry of hh3cMirrorConfigTable can be created only when the associated hh3cMirrorDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated hh3cMirrorDistributeTable objects should be deleted automatically. | 1.3.6.1.4.1.25506.10.2.1.16.1.1 | Hh3cLvIDType | not-accessible | current |
| hh3cMirrorType OBJECT-TYPE This object identifies the type of the mirror. | 1.3.6.1.4.1.25506.10.2.1.16.1.2 | INTEGER {sync(1), async(2), none(3)} | read-only | current |
| hh3cMirrorStatus OBJECT-TYPE This object identifies the state of the mirror resource. | 1.3.6.1.4.1.25506.10.2.1.16.1.3 | Hh3cStorageOnlineState | read-only | current |
| hh3cMirrorName OBJECT-TYPE This object identifies the name of the mirror resource. it is used when promote mirror resource. | 1.3.6.1.4.1.25506.10.2.1.16.1.4 | OCTET STRING | read-create | current |
| hh3cMirrorSyncPercentage OBJECT-TYPE This object identifies the percentage of the mirror sync. | 1.3.6.1.4.1.25506.10.2.1.16.1.5 | Integer32 (0..100) | read-only | current |
| hh3cMirrorSyncPerformance OBJECT-TYPE This object identifies the performance of the mirror sync. The unit is MB/S | 1.3.6.1.4.1.25506.10.2.1.16.1.6 | Integer32 (0..100) | read-only | current |
| hh3cMirrorDelta OBJECT-TYPE This object identifies size of delta data after the last mirror sync. | 1.3.6.1.4.1.25506.10.2.1.16.1.7 | Integer32 | read-only | current |
| hh3cMirrorRaidType OBJECT-TYPE This object identifies the raid type of the mirror resource. | 1.3.6.1.4.1.25506.10.2.1.16.1.8 | INTEGER {virtual(1), serviceEnable(2), none(3)} | read-create | current |
| hh3cMirrorSelectPolicy OBJECT-TYPE This object describes the policy about allocating the space for mirror resource. | 1.3.6.1.4.1.25506.10.2.1.16.1.9 | Hh3cExtendSelectPolicy | read-create | current |
| hh3cMirrorSwitch OBJECT-TYPE This object identifies the state of the mirror. The value of 'sync' means synchronize mannually. The value of 'swap' means switch the roles of the primary resource and mirror resource. The value of 'promte' means break the mirrored pair and convert the mirror resource into an independent logic volume. The new logic volume will have all of the properties of a regular logic volume. Note that if the action of 'promte' is executed successfully, this mirror resource will become a primary logic volume, and this entry will be deleted automatically. | 1.3.6.1.4.1.25506.10.2.1.16.1.10 | INTEGER {sync(1), swap(2), promote(3), none(4)} | read-create | current |
| hh3cMirrorExtendRaidUuid OBJECT-TYPE This object identifies the raid of the mirror resource when the primary logic volume resource is extended. | 1.3.6.1.4.1.25506.10.2.1.16.1.11 | Hh3cRaidIDType | read-create | current |
| hh3cMirrorRowStatus OBJECT-TYPE This object identifies the action to create or delete the mirror resource. | 1.3.6.1.4.1.25506.10.2.1.16.1.12 | RowStatus | read-create | current |
| hh3cMirrorDistributeTable OBJECT-TYPE This table contains some entity to config the mirror resource. | 1.3.6.1.4.1.25506.10.2.1.17 | not-accessible | current | |
| hh3cMirrorDistributeEntry OBJECT-TYPE An entry containing some information applicable to mirror resource for the logic volume. | 1.3.6.1.4.1.25506.10.2.1.17.1 | not-accessible | current | |
| hh3cMirrorDistLvIndex OBJECT-TYPE This index is identical to hh3cLvIndex in HH3C-LOGIC-VOLUME-MIB. | 1.3.6.1.4.1.25506.10.2.1.17.1.1 | Hh3cLvIDType | not-accessible | current |
| hh3cMirrorRaidUuid OBJECT-TYPE This index is identical to hh3cRaidUuid in HH3C-RAID-MIB. | 1.3.6.1.4.1.25506.10.2.1.17.1.2 | Hh3cRaidIDType | not-accessible | current |
| hh3cMirrorRaidSize OBJECT-TYPE This object identifies the size on the special raid distributed for the mirror resource. | 1.3.6.1.4.1.25506.10.2.1.17.1.3 | Integer32 | read-create | current |
| hh3cMirrorExtRowStatus OBJECT-TYPE This object identifies the action to create or delete the distribution for the mirror resource. | 1.3.6.1.4.1.25506.10.2.1.17.1.4 | RowStatus | read-create | current |