HH3C-LswVLAN-MIB
- Registered at
- 1.3.6.1.4.1.25506.8.35.2
- Last updated
- 2016-08-31 00:00
- Organization
- New H3C Technologies Co., Ltd.
- Revisions
- 2016-08-31 00:00
- Namespace
- comware
- Source file
HH3C-LswVLAN-MIB- Digest
sha256:eadee728eccec877811ed292841193ca650780031ddbd52f6a449994dd2abfef
Contact
Platform Team New H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:100085
Imports
| From | Symbols |
|---|---|
| HH3C-LswINF-MIB | PortList, hh3cifVLANTrunkStatusEntry |
| HH3C-OID-MIB | hh3clswCommon |
| IF-MIB | ifEntry |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TimeInterval, TruthValue |
Imported by
2 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HH3C-LswINF-MIB HH3C-LswVLAN-MIB HH3C-OID-MIB IANAifType-MIB IF-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| Hh3cVlanIndex TEXTUAL-CONVENTION A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see VlanId textual convention). If the value is greater than 4095 then it represents a VLAN with scope local to the particular agent, i.e. one without a global VLAN-ID assigned to it. Such VLANs are outside the scope of IEEE 802.1Q but it is convenient to be able to manage them in the same way using this MIB. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hh3cLswVlanMngObject OBJECT-IDENTITY Description. | 1.3.6.1.4.1.25506.8.35.2.1 | current | ||
| hh3cdot1qVlanMIBTable OBJECT-TYPE VLAN MIB table | 1.3.6.1.4.1.25506.8.35.2.1.1 | not-accessible | current | |
| hh3cdot1qVlanMIBEntry OBJECT-TYPE Entries of VLAN MIB table | 1.3.6.1.4.1.25506.8.35.2.1.1.1 | not-accessible | current | |
| hh3cdot1qVlanIndex OBJECT-TYPE The VLAN-ID. | 1.3.6.1.4.1.25506.8.35.2.1.1.1.1 | Hh3cVlanIndex | read-only | current |
| hh3cdot1qVlanName OBJECT-TYPE Name of the VLAN. | 1.3.6.1.4.1.25506.8.35.2.1.1.1.2 | SnmpAdminString (SIZE(0..80)) | read-write | current |
| hh3cdot1qVlanPorts OBJECT-TYPE Port list of the VLAN. | 1.3.6.1.4.1.25506.8.35.2.1.1.1.3 | PortList | read-write | current |
| hh3cdot1qVlanType OBJECT-TYPE Vlan types: SuperVlan(1), Common vlan(2), and Sub-vlan(3). | 1.3.6.1.4.1.25506.8.35.2.1.1.1.4 | INTEGER {superVlan(1), common-vlan(2), sub-vlan(3), isolate-user-vlan(4), secondary-vlan(5), primaryVlan(6)} | read-write | current |
| hh3cdot1qVlanMacFilter OBJECT-TYPE Whether to filter MAC addresses. | 1.3.6.1.4.1.25506.8.35.2.1.1.1.5 | TruthValue | read-only | current |
| hh3cdot1qVlanMcastUnknownProtos OBJECT-TYPE Whether to broadcast the unknown packets. | 1.3.6.1.4.1.25506.8.35.2.1.1.1.6 | TruthValue | read-only | current |
| hh3cExistInterface OBJECT-TYPE Whether there is virtual interface. | 1.3.6.1.4.1.25506.8.35.2.1.1.1.7 | TruthValue | read-only | current |
| hh3cVlanInterfaceIndex OBJECT-TYPE Whether vlan interface is configured on vlan. If vlan interface is configured, the value of the node is vlan id, else the value is 0. | 1.3.6.1.4.1.25506.8.35.2.1.1.1.8 | INTEGER | read-only | current |
| hh3cdot1qVlanMacLearn OBJECT-TYPE MAC address learning identity. (common vlan/Sub-vlan) | 1.3.6.1.4.1.25506.8.35.2.1.1.1.9 | TruthValue | read-only | current |
| hh3cdot1qVlanStatus OBJECT-TYPE Status of the VLAN. | 1.3.6.1.4.1.25506.8.35.2.1.1.1.10 | INTEGER {other(1), static(2), dynamic(3)} | read-only | current |
| hh3cdot1qVlanCreationTime OBJECT-TYPE The sysUPTime when the VLAN is created. | 1.3.6.1.4.1.25506.8.35.2.1.1.1.11 | TimeTicks | read-only | current |
| hh3cdot1qVlanPriority OBJECT-TYPE Priority of the VLAN. | 1.3.6.1.4.1.25506.8.35.2.1.1.1.12 | INTEGER (0..7) | read-write | current |
| hh3cdot1qVlanRowStatus OBJECT-TYPE Operation status. | 1.3.6.1.4.1.25506.8.35.2.1.1.1.13 | RowStatus | read-create | current |
| hh3cdot1qVlanBroadcastSuppression OBJECT-TYPE Whether broadcast suppression of vlan be supported pro rata. The vlaue of 100 indicates no broadcast suppression. If the function is not supported, this object cannot be written, and 100 will be returned when reading | 1.3.6.1.4.1.25506.8.35.2.1.1.1.14 | INTEGER (0..100) | read-write | current |
| hh3cdot1qVlanBcastSuppressionPPS OBJECT-TYPE If the broadcast can be controlled with pps(packet per second)type, the value of 0 indicates no suppression. This node is conflicted with hh3cdot1qVlanBroadcastSuppression. If the mode is set, hh3cdot1qVlanBroadcastSuppression is unavailable. And vice versa. | 1.3.6.1.4.1.25506.8.35.2.1.1.1.15 | INTEGER (0..148800) | read-write | current |
| hh3cdot1qVlanMulticast OBJECT-TYPE Multicast vlan. The default value is disable(0). | 1.3.6.1.4.1.25506.8.35.2.1.1.1.16 | INTEGER {disable(0), enable(1)} | read-write | current |
| hh3cdot1qVlanTaggedPorts OBJECT-TYPE Tagged port list of the VLAN. | 1.3.6.1.4.1.25506.8.35.2.1.1.1.17 | PortList | read-only | current |
| hh3cdot1qVlanUntaggedPorts OBJECT-TYPE Untagged port list of the VLAN. | 1.3.6.1.4.1.25506.8.35.2.1.1.1.18 | PortList | read-only | current |
| hh3cdot1qVlanPortIndexs OBJECT-TYPE PortIndex list of the VLAN, that delimited by comma, such as 1,3,4,7. | 1.3.6.1.4.1.25506.8.35.2.1.1.1.19 | OCTET STRING | read-write | current |
| hh3cdot1qVlanStatisticStatus OBJECT-TYPE VLAN traffic statistics switch. The default value is false, which means the switch is off. | 1.3.6.1.4.1.25506.8.35.2.1.1.1.20 | TruthValue | read-write | current |
| hh3cdot1qVlanStatisticClear OBJECT-TYPE Clear statistics for the specified VLANs. Operation read is not supported. | 1.3.6.1.4.1.25506.8.35.2.1.1.1.21 | INTEGER {clear(1)} | read-write | current |
| hh3cdot1qVlanStatisticInTotalPkts OBJECT-TYPE The total number of inbound packets. | 1.3.6.1.4.1.25506.8.35.2.1.1.1.22 | Counter64 | read-only | current |
| hh3cdot1qVlanStatisticInTotalBytes OBJECT-TYPE The total number of inbound bytes. | 1.3.6.1.4.1.25506.8.35.2.1.1.1.23 | Counter64 | read-only | current |
| hh3cdot1qVlanStatisticInPPS OBJECT-TYPE The number of inbound packets per second. | 1.3.6.1.4.1.25506.8.35.2.1.1.1.24 | Counter64 | read-only | current |
| hh3cdot1qVlanStatisticInBPS OBJECT-TYPE The number of inbound bytes per second. | 1.3.6.1.4.1.25506.8.35.2.1.1.1.25 | Counter64 | read-only | current |
| hh3cdot1qVlanStatisticOutTotalPkts OBJECT-TYPE The total number of outbound packets. | 1.3.6.1.4.1.25506.8.35.2.1.1.1.26 | Counter64 | read-only | current |
| hh3cdot1qVlanStatisticOutTotalBytes OBJECT-TYPE The total number of outbound bytes. | 1.3.6.1.4.1.25506.8.35.2.1.1.1.27 | Counter64 | read-only | current |
| hh3cdot1qVlanStatisticOutPPS OBJECT-TYPE The number of outbound packets per second. | 1.3.6.1.4.1.25506.8.35.2.1.1.1.28 | Counter64 | read-only | current |
| hh3cdot1qVlanStatisticOutBPS OBJECT-TYPE The number of outbound bytes per second. | 1.3.6.1.4.1.25506.8.35.2.1.1.1.29 | Counter64 | read-only | current |
| hh3cVlanInterfaceTable OBJECT-TYPE Virtual interface configuration table | 1.3.6.1.4.1.25506.8.35.2.1.2 | not-accessible | current | |
| hh3cVlanInterfaceEntry OBJECT-TYPE Entries of virtual interface configuration table | 1.3.6.1.4.1.25506.8.35.2.1.2.1 | not-accessible | current | |
| hh3cVlanInterfaceID OBJECT-TYPE Index of the vlan interface table. | 1.3.6.1.4.1.25506.8.35.2.1.2.1.1 | INTEGER | read-only | current |
| hh3cdot1qVlanID OBJECT-TYPE VLAN-ID | 1.3.6.1.4.1.25506.8.35.2.1.2.1.2 | Hh3cVlanIndex | read-only | current |
| hh3cdot1qVlanIpAddress OBJECT-TYPE IP address of interface. | 1.3.6.1.4.1.25506.8.35.2.1.2.1.3 | IpAddress | read-write | current |
| hh3cdot1qVlanIpAddressMask OBJECT-TYPE IP address mask of interface. | 1.3.6.1.4.1.25506.8.35.2.1.2.1.4 | IpAddress | read-write | current |
| hh3cVlanInterfaceAdminStatus OBJECT-TYPE Status of VLAN virtual interfaces. | 1.3.6.1.4.1.25506.8.35.2.1.2.1.5 | INTEGER {up(1), down(2)} | read-write | current |
| hh3cVlanInterfaceFrameType OBJECT-TYPE Frame type accepted by VLAN virtual interfaces. | 1.3.6.1.4.1.25506.8.35.2.1.2.1.6 | INTEGER {ethernet-ii(1), ethernet-snap(2), ethernet-8022(3), ethernet-8023(4)} | read-only | current |
| hh3cInterfaceRowStatus OBJECT-TYPE Operation status. | 1.3.6.1.4.1.25506.8.35.2.1.2.1.7 | RowStatus | read-create | current |
| hh3cVlanInterfaceIpMethod OBJECT-TYPE Vlan interface ip address acquiring method which is manual, dhcp or bootp. | 1.3.6.1.4.1.25506.8.35.2.1.2.1.8 | INTEGER {assigned-ip(1), dhcp-ip(2), bootp-ip(3)} | read-write | current |
| hh3cVlanInterfaceIfIndex OBJECT-TYPE IfIndex of VLAN interface. | 1.3.6.1.4.1.25506.8.35.2.1.2.1.9 | INTEGER | read-only | current |
| hh3cifIsolateMappingTable OBJECT-TYPE Secondary vlan lists of Isolate-VLANs. | 1.3.6.1.4.1.25506.8.35.2.1.4 | not-accessible | current | |
| hh3cifIsolateMappingEntry OBJECT-TYPE Secondary vlan lists of Isolate-VLANs. | 1.3.6.1.4.1.25506.8.35.2.1.4.1 | not-accessible | current | |
| hh3cifIsolatePrimaryVlanID OBJECT-TYPE Primary VLAN-ID. | 1.3.6.1.4.1.25506.8.35.2.1.4.1.1 | Hh3cVlanIndex | read-only | current |
| hh3cifIsolateSecondaryVlanlistLow OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'. | 1.3.6.1.4.1.25506.8.35.2.1.4.1.2 | OCTET STRING (SIZE(0..256)) | read-write | current |
| hh3cifIsolateSecondaryVlanlistHigh OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'. | 1.3.6.1.4.1.25506.8.35.2.1.4.1.3 | OCTET STRING (SIZE(0..256)) | read-write | current |
| hh3cVlanInterfaceAddrTable OBJECT-TYPE VLAN interface IP address configuration table | 1.3.6.1.4.1.25506.8.35.2.1.5 | not-accessible | current | |
| hh3cVlanInterfaceAddrEntry OBJECT-TYPE Entries of VLAN interface IP address configuration table | 1.3.6.1.4.1.25506.8.35.2.1.5.1 | not-accessible | current | |
| hh3cVlanInterfaceIpIfIndex OBJECT-TYPE Index of VLAN interfaces. | 1.3.6.1.4.1.25506.8.35.2.1.5.1.1 | INTEGER | read-only | current |
| hh3cVlanInterfaceIpAddr OBJECT-TYPE IP address of VLAN interface. | 1.3.6.1.4.1.25506.8.35.2.1.5.1.2 | IpAddress | read-only | current |
| hh3cVlanInterfaceIpMask OBJECT-TYPE IP address mask of VLAN interface. When destory single IP address, you must set it correct to relative IP address. | 1.3.6.1.4.1.25506.8.35.2.1.5.1.3 | IpAddress | read-create | current |
| hh3cVlanInterfaceIpType OBJECT-TYPE IP address type. | 1.3.6.1.4.1.25506.8.35.2.1.5.1.4 | INTEGER {primary(1), sub(2), cluster(3), vrrp(4)} | read-create | current |
| hh3cVlanInterfaceIpRowStatus OBJECT-TYPE Operation status. active(1) will only be set when taking GET or GET NEXT operation. createAndGo(4) and destory(6) is valid when taking SET operation. | 1.3.6.1.4.1.25506.8.35.2.1.5.1.5 | RowStatus | read-create | current |
| hh3cDot1qVlanBatchMIBTable OBJECT-TYPE VLAN batch configuration table. In the case of VLAN batch creation, hh3cdot1qVlanBatchSetOperate should be set to 1. For example, if creating a row is for creating VLANs 2 to 4, the value of the objects should be set as follows: hh3cdot1qVlanBatchStartIndex 2, hh3cdot1qVlanBatchEndIndex 4, hh3cdot1qVlanBatchSetOperate create(1), hh3cdot1qVlanBatchRowStatus createAndGo(4). In the case of VLAN batch deletion, hh3cdot1qVlanBatchSetOperate should be set to 2. For example, if creating a row is for deleting VLANs 10 to 20, the value of the objects should be set as follows: hh3cdot1qVlanBatchStartIndex 10, hh3cdot1qVlanBatchEndIndex 20, hh3cdot1qVlanBatchSetOperate delete(2), hh3cdot1qVlanBatchRowStatus createAndGo(4). When the action of batch VLANs deleting or creating is done, one row will be existent until it is deleted manually or ages out, but the VLANs of it won't disappear with the deletion of the row. | 1.3.6.1.4.1.25506.8.35.2.1.6 | not-accessible | current | |
| hh3cDot1qVlanBatchMIBEntry OBJECT-TYPE VLAN batch configuration entry. | 1.3.6.1.4.1.25506.8.35.2.1.6.1 | not-accessible | current | |
| hh3cdot1qVlanBatchOperIndex OBJECT-TYPE The consequence of operation. | 1.3.6.1.4.1.25506.8.35.2.1.6.1.1 | Integer32 | read-only | current |
| hh3cdot1qVlanBatchStartIndex OBJECT-TYPE The value of start VLAN-ID. | 1.3.6.1.4.1.25506.8.35.2.1.6.1.2 | Hh3cVlanIndex | read-write | current |
| hh3cdot1qVlanBatchEndIndex OBJECT-TYPE The value of end VLAN-ID. | 1.3.6.1.4.1.25506.8.35.2.1.6.1.3 | Hh3cVlanIndex | read-write | current |
| hh3cdot1qVlanBatchOperStatus OBJECT-TYPE The status of operation. | 1.3.6.1.4.1.25506.8.35.2.1.6.1.4 | INTEGER {opInprogress(1), opfailure(2), opsuccess(3), opsuccesspartial(4)} | read-only | current |
| hh3cdot1qVlanBatchRowStatus OBJECT-TYPE The row status of Hh3cDot1qVlanBatchMIBEntry. | 1.3.6.1.4.1.25506.8.35.2.1.6.1.5 | RowStatus | read-create | current |
| hh3cdot1qVlanBatchSetOperate OBJECT-TYPE VLAN batch creation or deletion. | 1.3.6.1.4.1.25506.8.35.2.1.6.1.6 | INTEGER {create(1), delete(2)} | read-create | current |
| hh3cifSuperVlanMappingTable OBJECT-TYPE Sub VLAN lists of super-VLANs. | 1.3.6.1.4.1.25506.8.35.2.1.7 | not-accessible | current | |
| hh3cifSuperVlanMappingEntry OBJECT-TYPE Sub VLAN lists of super-VLANs. | 1.3.6.1.4.1.25506.8.35.2.1.7.1 | not-accessible | current | |
| hh3cifSuperVlanID OBJECT-TYPE Super VLAN ID. | 1.3.6.1.4.1.25506.8.35.2.1.7.1.1 | Hh3cVlanIndex | read-only | current |
| hh3cifSubVlanlistLow OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each sub VLAN of the super VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is a sub VLAN of the super VLAN; the VLAN is not a sub VLAN of the super VLAN if its bit has a value of '0'. | 1.3.6.1.4.1.25506.8.35.2.1.7.1.2 | OCTET STRING (SIZE(0..256)) | read-write | current |
| hh3cifSubVlanlistHigh OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each sub VLAN of the super VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is a sub VLAN of the super VLAN; the VLAN is not a sub VLAN of the super VLAN if its bit has a value of '0'. | 1.3.6.1.4.1.25506.8.35.2.1.7.1.3 | OCTET STRING (SIZE(0..256)) | read-write | current |
| hh3cPrivateVlanMappingTable OBJECT-TYPE Secondary vlan lists of Primary-VLANs. | 1.3.6.1.4.1.25506.8.35.2.1.8 | not-accessible | current | |
| hh3cPrivateVlanMappingEntry OBJECT-TYPE Secondary vlan lists of Primary-VLANs. | 1.3.6.1.4.1.25506.8.35.2.1.8.1 | not-accessible | current | |
| hh3cPrimaryVlanID OBJECT-TYPE Primary VLAN-ID. | 1.3.6.1.4.1.25506.8.35.2.1.8.1.1 | Hh3cVlanIndex | read-only | current |
| hh3cSecondaryVlanlistLow OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'. | 1.3.6.1.4.1.25506.8.35.2.1.8.1.2 | OCTET STRING (SIZE(0..256)) | read-write | current |
| hh3cSecondaryVlanlistHigh OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'. | 1.3.6.1.4.1.25506.8.35.2.1.8.1.3 | OCTET STRING (SIZE(0..256)) | read-write | current |
| hh3cLswVlanProtoObject OBJECT-IDENTITY Description. | 1.3.6.1.4.1.25506.8.35.2.2 | current | ||
| hh3cVLANMibGarpLeaveAllTime OBJECT-TYPE The GARP LeaveAll time, in centiseconds. | 1.3.6.1.4.1.25506.8.35.2.2.14 | TimeInterval | read-write | current |
| hh3cvLANMibSwitchCountTable OBJECT-TYPE A table containing the information various statistics of switch. | 1.3.6.1.4.1.25506.8.35.2.2.15 | not-accessible | current | |
| hh3cvLANMibSwitchCountEntry OBJECT-TYPE A table containing the information various statistics of switch. | 1.3.6.1.4.1.25506.8.35.2.2.15.1 | not-accessible | current | |
| hh3cVLANMibSwitchGMRPRXPkt OBJECT-TYPE Number of GMRP frames received. | 1.3.6.1.4.1.25506.8.35.2.2.15.1.1 | Counter32 | read-only | current |
| hh3cVLANMibSwitchGVRPRXPkt OBJECT-TYPE Number of GVRP frames received. | 1.3.6.1.4.1.25506.8.35.2.2.15.1.2 | Counter32 | read-only | current |
| hh3cVLANMibSwitchGMRPTXPkt OBJECT-TYPE Number of GMRP frames transmitted. | 1.3.6.1.4.1.25506.8.35.2.2.15.1.3 | Counter32 | read-only | current |
| hh3cVLANMibSwitchGVRPTXPkt OBJECT-TYPE Number of GVRP frames transmitted. | 1.3.6.1.4.1.25506.8.35.2.2.15.1.4 | Counter32 | read-only | current |
| hh3cVLANMibSwitchDiscardedPkt OBJECT-TYPE Number of discarded frames. | 1.3.6.1.4.1.25506.8.35.2.2.15.1.5 | Counter32 | read-only | current |
| hh3cVLANMibSwitchGarpStatClear OBJECT-TYPE Clear various Statistics viz. read operation not supported. | 1.3.6.1.4.1.25506.8.35.2.2.15.1.6 | INTEGER {clear(1)} | read-write | current |
| hh3cvLANMibHoldTimeTable OBJECT-TYPE A table for setting/getting the Hold Time for a particular port. | 1.3.6.1.4.1.25506.8.35.2.2.16 | not-accessible | current | |
| hh3cvLANMibHoldTimeEntry OBJECT-TYPE A table for setting/getting the HoldTime of the port. | 1.3.6.1.4.1.25506.8.35.2.2.16.1 | not-accessible | current | |
| hh3cVLANMibHoldTime OBJECT-TYPE HoldTime of the port. | 1.3.6.1.4.1.25506.8.35.2.2.16.1.1 | INTEGER (10..32765) | read-write | current |