HH3C-LswINF-MIB
- Registered at
- 1.3.6.1.4.1.25506.8.35.11.3.6.1.4.1.25506.8.35.5
- Last updated
- 2019-08-03 00:00
- Organization
- New H3C Tech. Co., Ltd.
- Revisions
- 2019-08-03 00:00, 2019-06-13 00:00, 2016-07-02 00:00, 2015-10-14 00:00, 2001-06-29 00:00
- Namespace
- comware
- Source file
HH3C-LswINF-MIB- Digest
sha256:fb16c70e045a01807e066c9b8c8c55d409681720275dd5092c15fa6ab115592d
Contact
Platform Team New H3C Tech. Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:100085
Imports
| From | Symbols |
|---|---|
| HH3C-OID-MIB | hh3clswCommon |
| IF-MIB | InterfaceIndex, ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Counter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HH3C-LswINF-MIB HH3C-OID-MIB IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| DropDirection TEXTUAL-CONVENTION Representing the direction of dropping packets, if applicable. | current | |||
| PortList TEXTUAL-CONVENTION Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. | current | |||
| SpeedModeFlag TEXTUAL-CONVENTION Type of Negotiable Speed mode. | current | |||
| VlanIndex TEXTUAL-CONVENTION A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see VlanId textual convention). If the value is greater than 4095 then it represents a VLAN with scope local to the particular agent, i.e. one without a global VLAN-ID assigned to it. Such VLANs are outside the scope of IEEE 802.1Q but it is convenient to be able to manage them in the same way using this MIB. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hh3cLswExtInterface OBJECT-IDENTITY | 1.3.6.1.4.1.25506.8.35.1 | |||
| hh3cifXXTable OBJECT-TYPE Extended interface information table. | 1.3.6.1.4.1.25506.8.35.1.1 | not-accessible | current | |
| hh3cifXXEntry OBJECT-TYPE Entries of extended interface information table. | 1.3.6.1.4.1.25506.8.35.1.1.1 | not-accessible | current | |
| hh3cifUnBoundPort OBJECT-TYPE Whether it is the unbound port. (true indicates that the port is the main port of the aggregation or the port does not participate in the aggregation.) | 1.3.6.1.4.1.25506.8.35.1.1.1.1 | TruthValue | read-only | current |
| hh3cifISPhyPort OBJECT-TYPE Whether it is a physical interface. | 1.3.6.1.4.1.25506.8.35.1.1.1.2 | TruthValue | read-only | current |
| hh3cifAggregatePort OBJECT-TYPE Whether it is the aggregated port. (if the port participates in the aggregation, this value is true.) | 1.3.6.1.4.1.25506.8.35.1.1.1.3 | TruthValue | read-only | current |
| hh3cifMirrorPort OBJECT-TYPE Whether it is a mirror port. | 1.3.6.1.4.1.25506.8.35.1.1.1.4 | TruthValue | read-write | current |
| hh3cifVLANType OBJECT-TYPE port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port. | 1.3.6.1.4.1.25506.8.35.1.1.1.5 | INTEGER {vLANTrunk(1), access(2), hybrid(3), fabric(4)} | read-write | current |
| hh3cifMcastControl OBJECT-TYPE Broadcast storm suppression with the step length of 1, ranging from 0 to 100 percent. In some products the step is 5, ranging from 0 to 100. | 1.3.6.1.4.1.25506.8.35.1.1.1.6 | INTEGER (0..100) | read-write | current |
| hh3cifFlowControl OBJECT-TYPE Flow control status. | 1.3.6.1.4.1.25506.8.35.1.1.1.7 | TruthValue | read-write | current |
| hh3cifSrcMacControl OBJECT-TYPE Whether to filter by source MAC address. | 1.3.6.1.4.1.25506.8.35.1.1.1.8 | TruthValue | read-only | current |
| hh3cifClearStat OBJECT-TYPE Clear specify port statistics. Operation read is not supported. | 1.3.6.1.4.1.25506.8.35.1.1.1.9 | INTEGER {clear(1)} | read-write | current |
| hh3cifXXBasePortIndex OBJECT-TYPE Index number of the port and the first port index of the device is 1. | 1.3.6.1.4.1.25506.8.35.1.1.1.10 | INTEGER | read-only | current |
| hh3cifXXDevPortIndex OBJECT-TYPE Device index of the port. | 1.3.6.1.4.1.25506.8.35.1.1.1.11 | INTEGER | read-only | current |
| hh3cifPpsMcastControl OBJECT-TYPE The broadcast suppression with pps(packet per second) type. The max value is determined by the port type and product. | 1.3.6.1.4.1.25506.8.35.1.1.1.12 | Integer32 | read-write | current |
| hh3cifPpsBcastDisValControl OBJECT-TYPE Control the port's pps(packet per second) broadcast suppression. When the port is enabled, its pps broadcast suppression value is the global disperse value, and when disabled, it doesn't suppress broadcast. | 1.3.6.1.4.1.25506.8.35.1.1.1.13 | INTEGER {enable(1), disable(2)} | read-write | current |
| hh3cifUniSuppressionStep OBJECT-TYPE The step of unicast suppression in ratio mode. | 1.3.6.1.4.1.25506.8.35.1.1.1.14 | Integer32 | read-only | current |
| hh3cifPpsUniSuppressionMax OBJECT-TYPE The max pps(packet per second) value of unicast suppression in pps mode. | 1.3.6.1.4.1.25506.8.35.1.1.1.15 | Integer32 | read-only | current |
| hh3cifMulSuppressionStep OBJECT-TYPE The step of multicast suppression in ratio mode. | 1.3.6.1.4.1.25506.8.35.1.1.1.16 | Integer32 | read-only | current |
| hh3cifPpsMulSuppressionMax OBJECT-TYPE The max pps(packet per second) value of multicast suppression in pps mode. | 1.3.6.1.4.1.25506.8.35.1.1.1.17 | Integer32 | read-only | current |
| hh3cifUniSuppression OBJECT-TYPE The unicast suppression with the ranging from 0 to 100 percent in ratio mode. The step is determined by hh3cifUniSuppressionStep. | 1.3.6.1.4.1.25506.8.35.1.1.1.18 | Integer32 | read-write | current |
| hh3cifPpsUniSuppression OBJECT-TYPE The unicast suppression in pps(packet per second) mode. The max value is determined by hh3cifPpsUniSuppressionMax. | 1.3.6.1.4.1.25506.8.35.1.1.1.19 | Integer32 | read-write | current |
| hh3cifMulSuppression OBJECT-TYPE The multicast suppression with ranging from 0 to 100 percent in ratio mode. The step is determined by hh3cifMulSuppressionStep. If hh3cifMulSuppressionFlag is 2 it means only unknown traffic suppression. | 1.3.6.1.4.1.25506.8.35.1.1.1.20 | Integer32 | read-write | current |
| hh3cifPpsMulSuppression OBJECT-TYPE The multicast suppression in pps(packet per second) mode. The max pps value is determined by hh3cifPpsMulSuppressionMax. If hh3cifMulSuppressionFlag is 2 it means only unknown traffic suppression. | 1.3.6.1.4.1.25506.8.35.1.1.1.21 | Integer32 | read-write | current |
| hh3cifComboActivePort OBJECT-TYPE Active port on combo interface. | 1.3.6.1.4.1.25506.8.35.1.1.1.22 | INTEGER {fiber(1), copper(2), na(3)} | read-write | obsolete |
| hh3cifBMbpsMulSuppressionMax OBJECT-TYPE The maximum value of the multicast suppression with bandwidth-based(Mbps) that a port can be configured. | 1.3.6.1.4.1.25506.8.35.1.1.1.23 | Integer32 | read-only | current |
| hh3cifBMbpsMulSuppression OBJECT-TYPE With bandwidth-based multicast suppression, the bandwidth is measured in Mbps. The upper limit of the multicast suppession with bandwidth-based(Mbps) is the value of hh3cifBMbpsMulSuppressionMax in the entry. The default value of hh3cifBMbpsMulSuppression is the value of hh3cifBMbpsMulSuppressionMax. | 1.3.6.1.4.1.25506.8.35.1.1.1.24 | Integer32 | read-write | current |
| hh3cifBKbpsMulSuppressionMax OBJECT-TYPE The maximum value of the multicast suppression with bandwidth-based(Kbps) that a port can be configured. | 1.3.6.1.4.1.25506.8.35.1.1.1.25 | Integer32 | read-only | current |
| hh3cifBKbpsMulSuppressionStep OBJECT-TYPE The step of multicast suppression with bandwidth-based(Kbps). | 1.3.6.1.4.1.25506.8.35.1.1.1.26 | Integer32 | read-only | current |
| hh3cifBKbpsMulSuppression OBJECT-TYPE With bandwidth-based multicast suppression, the bandwidth is measured in Kbps. The upper limit of the multicast suppession with bandwidth-based(Kbps) is the value of hh3cifBKbpsMulSuppressionMax in the entry. The value of hh3cifBKbpsMulSuppression must be multiple of the value of hh3cifBKbpsMulSuppressionStep. The default value of hh3cifBKbpsMulSuppression is the value of hh3cifBKbpsMulSuppressionMax. | 1.3.6.1.4.1.25506.8.35.1.1.1.27 | Integer32 | read-write | current |
| hh3cifUnknownPacketDropMul OBJECT-TYPE Control the port's unknown-multicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-multicast packets in inbound direction. When outbound direction is enabled on this port, the port will drop unknown-multicast packets in outbound direction. When both directions are enabled on this port, the port will drop unknown-multicast packets in both inbound and outbound directions. | 1.3.6.1.4.1.25506.8.35.1.1.1.28 | DropDirection | read-write | current |
| hh3cifUnknownPacketDropUni OBJECT-TYPE Control the port's unknown-unicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-unicast packets in inbound direction. When outbound direction is enabled on this port, the port will drop unknown-unicast packets in outbound direction. When both directions are enabled on this port, the port will drop unknown-unicast packets in both inbound and outbound directions. | 1.3.6.1.4.1.25506.8.35.1.1.1.29 | DropDirection | read-write | current |
| hh3cifBMbpsUniSuppressionMax OBJECT-TYPE The maximum value of the unicast suppression with bandwidth-based (Mbps) that a port can be configured. | 1.3.6.1.4.1.25506.8.35.1.1.1.30 | Integer32 | read-only | current |
| hh3cifBMbpsUniSuppression OBJECT-TYPE With bandwidth-based Unicast suppression, the bandwidth is measured in Mbps. The upper limit of the unicast suppession with bandwidth-based(Mbps) is the value of hh3cifBMbpsUniSuppressionMax in the entry. The default value of hh3cifBMbpsUniSuppression is the value of hh3cifBMbpsUniSuppressionMax. | 1.3.6.1.4.1.25506.8.35.1.1.1.31 | Integer32 | read-write | current |
| hh3cifBKbpsUniSuppressionMax OBJECT-TYPE The maximum value of the unicast suppression with bandwidth-based (Kbps) that a port can be configured. | 1.3.6.1.4.1.25506.8.35.1.1.1.32 | Integer32 | read-only | current |
| hh3cifBKbpsUniSuppressionStep OBJECT-TYPE The step of unicast suppression with bandwidth-based(Kbps). | 1.3.6.1.4.1.25506.8.35.1.1.1.33 | Integer32 | read-only | current |
| hh3cifBKbpsUniSuppression OBJECT-TYPE With bandwidth-based unicast suppression, the bandwidth is measured in Kbps. The upper limit of the unicast suppession with bandwidth-based(Kbps) is the value of hh3cifBKbpsUniSuppressionMax in the entry. The value of hh3cifBKbpsUniSuppression must be multiple of the value of hh3cifBKbpsUniSuppressionStep. The default value of hh3cifBKbpsUniSuppression is the value of hh3cifBKbpsUniSuppressionMax. | 1.3.6.1.4.1.25506.8.35.1.1.1.34 | Integer32 | read-write | current |
| hh3cifOutPayloadOctets OBJECT-TYPE The actual output octets of the interface. | 1.3.6.1.4.1.25506.8.35.1.1.1.35 | Counter64 | read-only | current |
| hh3cifInPayloadOctets OBJECT-TYPE The actual input octets of the interface. | 1.3.6.1.4.1.25506.8.35.1.1.1.36 | Counter64 | read-only | current |
| hh3cifInErrorPktsRate OBJECT-TYPE The rate of inbound error packets on the interface. | 1.3.6.1.4.1.25506.8.35.1.1.1.37 | Integer32 | read-only | current |
| hh3cifInPkts OBJECT-TYPE The number of packets received on the interface. | 1.3.6.1.4.1.25506.8.35.1.1.1.38 | Counter64 | read-only | current |
| hh3cifInNormalPkts OBJECT-TYPE The number of normal packets received on the interface. | 1.3.6.1.4.1.25506.8.35.1.1.1.39 | Counter64 | read-only | current |
| hh3cifOutPkts OBJECT-TYPE The number of packets sent on the interface. | 1.3.6.1.4.1.25506.8.35.1.1.1.40 | Counter64 | read-only | current |
| hh3cifMulSuppressionFlag OBJECT-TYPE The multicast suppression flag. If only unknown multicast traffic is suppressed, the value is unknown(2), and all(1) for suppression of all traffic (unknown and known). | 1.3.6.1.4.1.25506.8.35.1.1.1.41 | INTEGER {all(1), unknown(2)} | read-write | current |
| hh3cifAggregateTable OBJECT-TYPE Port aggregation information table. | 1.3.6.1.4.1.25506.8.35.1.2 | not-accessible | current | |
| hh3cifAggregateEntry OBJECT-TYPE Port aggregation information table. | 1.3.6.1.4.1.25506.8.35.1.2.1 | not-accessible | current | |
| hh3cifAggregatePortIndex OBJECT-TYPE Index number of the main aggregated port. | 1.3.6.1.4.1.25506.8.35.1.2.1.1 | InterfaceIndex | read-only | current |
| hh3cifAggregatePortName OBJECT-TYPE Aggregation group name. | 1.3.6.1.4.1.25506.8.35.1.2.1.2 | OCTET STRING (SIZE(0..40)) | read-write | current |
| hh3cifAggregatePortListPorts OBJECT-TYPE Portlist of a aggregating. | 1.3.6.1.4.1.25506.8.35.1.2.1.3 | PortList | read-write | current |
| hh3cifAggregateModel OBJECT-TYPE Load sharing mode for the port aggregation. | 1.3.6.1.4.1.25506.8.35.1.2.1.4 | INTEGER {ingress(1), both(2), round-robin(3)} | read-write | current |
| hh3cifAggregateOperStatus OBJECT-TYPE Current operation status of the row. | 1.3.6.1.4.1.25506.8.35.1.2.1.5 | RowStatus | read-create | current |
| hh3cifHybridPortTable OBJECT-TYPE Hybrid-port configuration table. | 1.3.6.1.4.1.25506.8.35.1.3 | not-accessible | current | |
| hh3cifHybridPortEntry OBJECT-TYPE Hybrid-port configuration table. | 1.3.6.1.4.1.25506.8.35.1.3.1 | not-accessible | current | |
| hh3cifHybridPortIndex OBJECT-TYPE Index number of Hybrid-port. | 1.3.6.1.4.1.25506.8.35.1.3.1.1 | INTEGER | read-only | current |
| hh3cifHybridTaggedVlanListLow OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each tagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is tagged in the set of VLANs; the VLAN is not tagged if its bit has a value of '0'. | 1.3.6.1.4.1.25506.8.35.1.3.1.2 | OCTET STRING (SIZE(0..256)) | read-write | current |
| hh3cifHybridTaggedVlanListHigh OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each tagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is tagged in the set of VLANs; the VLAN is not tagged if its bit has a value of '0'. | 1.3.6.1.4.1.25506.8.35.1.3.1.3 | OCTET STRING (SIZE(0..256)) | read-write | current |
| hh3cifHybridUnTaggedVlanListLow OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'. | 1.3.6.1.4.1.25506.8.35.1.3.1.4 | OCTET STRING (SIZE(0..256)) | read-write | current |
| hh3cifHybridUnTaggedVlanListHigh OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'. | 1.3.6.1.4.1.25506.8.35.1.3.1.5 | OCTET STRING (SIZE(0..256)) | read-write | current |
| hh3cifComboPortTable OBJECT-TYPE Combo-port table. | 1.3.6.1.4.1.25506.8.35.1.4 | not-accessible | current | |
| hh3cifComboPortEntry OBJECT-TYPE The entry of hh3cifComboPortTable. | 1.3.6.1.4.1.25506.8.35.1.4.1 | not-accessible | current | |
| hh3cifComboPortIndex OBJECT-TYPE The combo-port interface index. Its value is the same as the value of ifIndex in ifTable, but only includes indexes of the combo-port interfaces. | 1.3.6.1.4.1.25506.8.35.1.4.1.1 | InterfaceIndex | read-only | current |
| hh3cifComboPortCurActive OBJECT-TYPE Current active interface of combo interfaces. The value 'fiber' means the interface with fiber connector of the pair of combo-port interfaces is active. The value 'copper' means the interface with copper connector of the pair is active. The value 'na' means not supported. The value 'auto' means the interface identified the copper or fiber port automatic. | 1.3.6.1.4.1.25506.8.35.1.4.1.2 | INTEGER {fiber(1), copper(2), na(3), auto(4)} | read-write | current |
| hh3cifPktBufTable OBJECT-TYPE Packet buffer table. | 1.3.6.1.4.1.25506.8.35.1.5 | not-accessible | current | |
| hh3cifPktBufEntry OBJECT-TYPE The entry of hh3cifPktBufTable. | 1.3.6.1.4.1.25506.8.35.1.5.1 | not-accessible | current | |
| hh3cifPktBufFree OBJECT-TYPE The number of packet buffers available for the interface. | 1.3.6.1.4.1.25506.8.35.1.5.1.1 | Integer32 | read-only | current |
| hh3cifPktBufInit OBJECT-TYPE The number of packet buffers allocated when the interface was created. | 1.3.6.1.4.1.25506.8.35.1.5.1.2 | Integer32 | read-only | current |
| hh3cifPktBufMin OBJECT-TYPE The smallest number of packet buffers available for the interface. | 1.3.6.1.4.1.25506.8.35.1.5.1.3 | Integer32 | read-only | current |
| hh3cifPktBufMiss OBJECT-TYPE The number of times that the interface failed to obtain a packet buffer. Failure to obtain a buffer indicates that buffers were busy. | 1.3.6.1.4.1.25506.8.35.1.5.1.4 | Counter64 | read-only | current |
| hh3cifPktBufInDrop OBJECT-TYPE The number of ingress packets dropped by the interface because of insufficient data buffer. | 1.3.6.1.4.1.25506.8.35.1.5.1.5 | Counter64 | read-only | current |
| hh3cifPktBufEgDrop OBJECT-TYPE The number of egress packets dropped by the interface because of insufficient data buffer. | 1.3.6.1.4.1.25506.8.35.1.5.1.6 | Counter64 | read-only | current |
| hh3cifQueuePktBufTable OBJECT-TYPE 802.1p queue of the interface packet buffer table. | 1.3.6.1.4.1.25506.8.35.1.6 | not-accessible | current | |
| hh3cifQueuePktBufEntry OBJECT-TYPE The entry of hh3cifQueuePktBufTable. | 1.3.6.1.4.1.25506.8.35.1.6.1 | not-accessible | current | |
| hh3cifQueueId OBJECT-TYPE The 802.1p queue ID of the interface. This value is used to specify the queue ID of the interface when the user wants to read one queue of the interface. The index number 1-8 correspond with 802.1p queue ID 0-7. | 1.3.6.1.4.1.25506.8.35.1.6.1.1 | Integer32 (1..8) | read-only | current |
| hh3cifQueuePktBufTotal OBJECT-TYPE The number of packet buffers available for the interface, including fixed buffer and shared buffer. | 1.3.6.1.4.1.25506.8.35.1.6.1.2 | Unsigned32 | read-only | current |
| hh3cifQueueBufUsed OBJECT-TYPE The number of packet buffers that have been used for each 802.1p queue of the interface. | 1.3.6.1.4.1.25506.8.35.1.6.1.3 | Unsigned32 | read-only | current |
| hh3cifQueueBufThreCount OBJECT-TYPE The number of times that each 802.1p queue of the interface has exceeded the buffer threshold. The threshold is configurated by user. | 1.3.6.1.4.1.25506.8.35.1.6.1.4 | Counter32 | read-only | current |
| hh3cifQueueBufUsageIn5Seconds OBJECT-TYPE The buffer usage in the last 5 seconds for each 802.1p queue of the interface. | 1.3.6.1.4.1.25506.8.35.1.6.1.5 | Integer32 (0..100) | read-only | current |
| hh3cifQueueBufUsageIn1Minute OBJECT-TYPE The buffer usage in the last 1 minute for each 802.1p queue of the interface. | 1.3.6.1.4.1.25506.8.35.1.6.1.6 | Integer32 (0..100) | read-only | current |
| hh3cifQueueBufUsageIn5Minutes OBJECT-TYPE The buffer usage in the last 5 minutes for each 802.1p queue of the interface. | 1.3.6.1.4.1.25506.8.35.1.6.1.7 | Integer32 (0..100) | read-only | current |
| hh3cLswL2InfMibObject OBJECT-IDENTITY | 1.3.6.1.4.1.25506.8.35.5.1 | |||
| hh3cSlotPortMax OBJECT-TYPE Max ports of the slots. | 1.3.6.1.4.1.25506.8.35.5.1.1 | INTEGER | read-only | current |
| hh3cSwitchPortMax OBJECT-TYPE Max ports that this switch includes. | 1.3.6.1.4.1.25506.8.35.5.1.2 | INTEGER | read-only | current |
| hh3cifVLANTrunkStatusTable OBJECT-TYPE Gvrp attributes on the VlanTrunk port. | 1.3.6.1.4.1.25506.8.35.5.1.3 | not-accessible | current | |
| hh3cifVLANTrunkStatusEntry OBJECT-TYPE Gvrp attributes on the VlanTrunk port. | 1.3.6.1.4.1.25506.8.35.5.1.3.1 | not-accessible | current | |
| hh3cifVLANTrunkIndex OBJECT-TYPE Index number of the VLANTrunk interface. | 1.3.6.1.4.1.25506.8.35.5.1.3.1.1 | InterfaceIndex | read-only | current |
| hh3cifVLANTrunkGvrpRegistration OBJECT-TYPE GVRP registration information normal: This is the default configuration. Allow create, register and unregister vlans dynamiclly at this port. fixed: Aallow create and register vlan manually at this port. Prevent from unregistering vlans or registering known vlans of this port at another trunk port. forbidden: Unregister all vlans but vlan 1, forbid to create or register any other vlans at this port. | 1.3.6.1.4.1.25506.8.35.5.1.3.1.2 | INTEGER {normal(1), fixed(2), forbidden(3)} | read-write | current |
| hh3cifVLANTrunkPassListLow OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each actually passed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is actually passed in the set of VLANs; the VLAN is not actually passed if its bit has a value of '0'. | 1.3.6.1.4.1.25506.8.35.5.1.3.1.4 | OCTET STRING | read-only | current |
| hh3cifVLANTrunkPassListHigh OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each actually passed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is actually passed in the set of VLANs; the VLAN is not actually passed if its bit has a value of '0'. | 1.3.6.1.4.1.25506.8.35.5.1.3.1.5 | OCTET STRING | read-only | current |
| hh3cifVLANTrunkAllowListLow OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is allowed in the set of VLANs; the VLAN is not allowed if its bit has a value of '0'. | 1.3.6.1.4.1.25506.8.35.5.1.3.1.6 | OCTET STRING | read-write | current |
| hh3cifVLANTrunkAllowListHigh OBJECT-TYPE Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is allowed in the set of VLANs; the VLAN is not allowed if its bit has a value of '0'. | 1.3.6.1.4.1.25506.8.35.5.1.3.1.7 | OCTET STRING | read-write | current |
| hh3cethernetTable OBJECT-TYPE Ethernet port attribute table. | 1.3.6.1.4.1.25506.8.35.5.1.4 | not-accessible | current | |
| hh3cethernetEntry OBJECT-TYPE Entries of Ethernet port attribute table | 1.3.6.1.4.1.25506.8.35.5.1.4.1 | not-accessible | current | |
| hh3cifEthernetDuplex OBJECT-TYPE Ethernet interface mode. | 1.3.6.1.4.1.25506.8.35.5.1.4.1.3 | INTEGER {full(1), half(2), auto(3)} | read-write | current |
| hh3cifEthernetMTU OBJECT-TYPE MTU on the Ethernet interface. | 1.3.6.1.4.1.25506.8.35.5.1.4.1.4 | INTEGER | read-write | current |
| hh3cifEthernetSpeed OBJECT-TYPE Ethernet interface speed. | 1.3.6.1.4.1.25506.8.35.5.1.4.1.5 | INTEGER {auto(0), s10M(10), s100M(100), s1000M(1000), s2500M(2500), s5000M(5000), s10000M(10000), s20000M(20000), s24000M(24000), s25000M(25000), s40000M(40000), s50000M(50000), s100000M(100000), s200000M(200000), s400000M(400000)} | read-write | current |
| hh3cifEthernetMdi OBJECT-TYPE Type of the line connected to the port. MDI-II (straight-through cable): 1 MDI-X (crossover cable): 2 MDI-AUTO (auto-sensing): 3 | 1.3.6.1.4.1.25506.8.35.5.1.4.1.7 | INTEGER {mdi-ii(1), mdi-x(2), mdi-auto(3)} | read-write | current |
| hh3cMaxMacLearn OBJECT-TYPE The maximum number of MAC addresses that the port can learn. The value -1 means that the number of Mac addresses that the port can learn is unlimited. | 1.3.6.1.4.1.25506.8.35.5.1.4.1.8 | INTEGER (-1..2147483647) | read-write | current |
| hh3cifMacAddressLearn OBJECT-TYPE This object indicates if the interface is allowed to learn mac address. eanbled(1) means the interface can learn mac address, otherwise disabled(2) can be set. | 1.3.6.1.4.1.25506.8.35.5.1.4.1.9 | INTEGER {enabled(1), disabled(2)} | read-only | current |
| hh3cifEthernetTest OBJECT-TYPE Test this interface. The actual testing will be different according to products. Read operation not supported. | 1.3.6.1.4.1.25506.8.35.5.1.4.1.10 | INTEGER {test(1)} | read-write | current |
| hh3cifMacAddrLearnMode OBJECT-TYPE Status indicates mac address learn mode of the interface. IVL(1) means independent VLAN learning. SVL means shared VLAN learning. | 1.3.6.1.4.1.25506.8.35.5.1.4.1.11 | INTEGER {iVL(1), sVL(2)} | read-only | current |
| hh3cifEthernetFlowInterval OBJECT-TYPE Set flow interval of the ethernet. The NMS should set value to integer which is a multiple of 5. | 1.3.6.1.4.1.25506.8.35.5.1.4.1.12 | INTEGER (5..300) | read-write | current |
| hh3cifEthernetIsolate OBJECT-TYPE Isolate group means that all ports in the same isolate group can not send and receive packets each other. Each octet within this value specifies a set of eight isolate groups, with the first octet specifying isolate groups 1 through 8, the second octet specifying isolate groups 9 through 16, etc. Within each octet, the leftmost bit is the first bit. the first bit represents the lowest numbered isolate group, and the last bit represents the highest numbered isolate group. one port can belong to more than one isolate group. Thus, each isolate group is represented by a single bit within the value of this object. If that bit has a value of '1', then that isolate group includes this port; the port is not included if its bit has a value of '0'. for example, the first octet is '10000100' means that the port is included in the isolate group 1 and isolate group 6. | 1.3.6.1.4.1.25506.8.35.5.1.4.1.13 | OCTET STRING | read-write | current |
| hh3cifVlanVPNStatus OBJECT-TYPE Vlan VPN enable status. | 1.3.6.1.4.1.25506.8.35.5.1.4.1.14 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| hh3cifVlanVPNUplinkStatus OBJECT-TYPE Vlan VPN uplink status. | 1.3.6.1.4.1.25506.8.35.5.1.4.1.15 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| hh3cifVlanVPNTPID OBJECT-TYPE Port based Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100. Please refer to hh3cVlanVPNTPIDMode to get more information. | 1.3.6.1.4.1.25506.8.35.5.1.4.1.16 | Integer32 (1..65535) | read-write | current |
| hh3cifIsolateGroupID OBJECT-TYPE Isolate group identifier. Value zero means this interface does not belong to any isolate group. | 1.3.6.1.4.1.25506.8.35.5.1.4.1.17 | Integer32 | read-write | current |
| hh3cifisUplinkPort OBJECT-TYPE Ethernet uplink status, default value is 2. | 1.3.6.1.4.1.25506.8.35.5.1.4.1.18 | INTEGER {yes(1), no(2)} | read-only | current |
| hh3cifEthernetAutoSpeedMask OBJECT-TYPE This object specifies which kinds of speed mode can be negotiated. Each bit corresponds to a kind of speed mode. If the value of a bit is '1', it means the corresponding speed mode is negotiable on the port. Otherwise the negotiation for that kind of speed mode is not supported on this port. If there are several negotiable speed modes, all bits for them are '1'. For example, if the speed mode 's10M' and 's1000M' can be negotiable, the value of this object is 0xA0. | 1.3.6.1.4.1.25506.8.35.5.1.4.1.19 | SpeedModeFlag | read-only | current |
| hh3cifEthernetAutoSpeed OBJECT-TYPE This object indicates which kinds of speed mode are negotiable on this port. Only when a bit of hh3cifEthernetAutoSpeedMask is '1', the corresponding bit of this object can be set to '1', indicating the corresponding speed mode is negotiable. For example, if the value of hh3cifEthernetAutoSpeedMask is 0xA0, which indicates speed mode 's10M' and 's1000M' are negotiable, the possible value of this object should be one of the four values (0x00, 0x20, 0x80 and 0xA0). If the value of hh3cifEthernetSpeed is not 'auto', the value of this object is insignificant and should be ignored. The value length of this object should be as long as that of hh3cifEthernetAutoSpeedMask. | 1.3.6.1.4.1.25506.8.35.5.1.4.1.20 | SpeedModeFlag | read-write | current |
| hh3cIsolateGroupMax OBJECT-TYPE Max isolate group that this device support, the value is zero means that the device does not support isolate group. | 1.3.6.1.4.1.25506.8.35.5.1.5 | Integer32 | read-only | current |
| hh3cGlobalBroadcastMaxPps OBJECT-TYPE The global max packets per second. When it is set, the value of BroadcastMaxPps in all ports will be changed to that setting. | 1.3.6.1.4.1.25506.8.35.5.1.6 | INTEGER (0..14881000) | read-write | current |
| hh3cGlobalBroadcastMaxRatio OBJECT-TYPE The global max-ratio of broadcast from 0 to 100 percent. When it is set, the value of BroadcastMaxRatio in all ports will be changed to that setting. | 1.3.6.1.4.1.25506.8.35.5.1.7 | INTEGER (0..100) | read-write | current |
| hh3cBpduTunnelStatus OBJECT-TYPE Bpdu tunnel enable status. | 1.3.6.1.4.1.25506.8.35.5.1.8 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| hh3cVlanVPNTPIDMode OBJECT-TYPE Vlan VPN TPID mode. The value 'port-based' means VLAN VPN TPID value would be set based on port via hh3cifVlanVPNTPID. In this situation, hh3cVlanVPNTPID is meaningless and always return 0x8100. The value 'global' means VLAN VPN TPID value should be set globally via hh3cVlanVPNTPID. In this situation, hh3cifVlanVPNTPID in hh3cethernetTable has the same value with hh3cVlanVPNTPID. | 1.3.6.1.4.1.25506.8.35.5.1.9 | INTEGER {port-based(1), global(2)} | read-only | current |
| hh3cVlanVPNTPID OBJECT-TYPE Global Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100. | 1.3.6.1.4.1.25506.8.35.5.1.10 | Integer32 (1..65535) | read-write | current |
| hh3cPortIsolateGroupTable OBJECT-TYPE Isolate Group attribute table. | 1.3.6.1.4.1.25506.8.35.5.1.11 | not-accessible | current | |
| hh3cPortIsolateGroupEntry OBJECT-TYPE The entry of hh3cPortIsolateGroupTable. | 1.3.6.1.4.1.25506.8.35.5.1.11.1 | not-accessible | current | |
| hh3cPortIsolateGroupIndex OBJECT-TYPE Port isolate group identifier. The index of the hh3cPortIsolateGroupTable. The value ranges from 1 to the limit of isolate group quantity. | 1.3.6.1.4.1.25506.8.35.5.1.11.1.1 | Integer32 | not-accessible | current |
| hh3cPortIsolateUplinkIfIndex OBJECT-TYPE Index number of the uplink interface. | 1.3.6.1.4.1.25506.8.35.5.1.11.1.2 | InterfaceIndex | read-create | current |
| hh3cPortIsolateGroupRowStatus OBJECT-TYPE Current operation status of the row. | 1.3.6.1.4.1.25506.8.35.5.1.11.1.3 | RowStatus | read-create | current |
| hh3cPortIsolateGroupDescription OBJECT-TYPE Port isolate group description, default value is zero-length string. | 1.3.6.1.4.1.25506.8.35.5.1.11.1.4 | DisplayString (SIZE(0..80)) | read-create | current |
| hh3cMaxMacLearnRange OBJECT-TYPE The maximum number of MAC address that the port supports. | 1.3.6.1.4.1.25506.8.35.5.1.12 | Integer32 | read-only | current |
| hh3cifPortProtocolStatTable OBJECT-TYPE This table contains objects of port statistics information based on IPv4 and IPv6 protocols. | 1.3.6.1.4.1.25506.8.35.5.1.13 | not-accessible | current | |
| hh3cifPortProtocolStatEntry OBJECT-TYPE The entry of hh3cifPortProtocolStatTable. | 1.3.6.1.4.1.25506.8.35.5.1.13.1 | not-accessible | current | |
| hh3cifIPv4InOctets OBJECT-TYPE Number of octets based on IPv4 received on the interface. | 1.3.6.1.4.1.25506.8.35.5.1.13.1.1 | Counter64 | read-only | current |
| hh3cifIPv4InUcastPkts OBJECT-TYPE Number of unicast packets based on IPv4 received on the interface. | 1.3.6.1.4.1.25506.8.35.5.1.13.1.2 | Counter64 | read-only | current |
| hh3cifIPv4InMultiPkts OBJECT-TYPE Number of multicast packets based on IPv4 received on the interface. | 1.3.6.1.4.1.25506.8.35.5.1.13.1.3 | Counter64 | read-only | current |
| hh3cifIPv4InBroadcastPkts OBJECT-TYPE Number of broadcast packets based on IPv4 received on the interface. | 1.3.6.1.4.1.25506.8.35.5.1.13.1.4 | Counter64 | read-only | current |
| hh3cifIPv4InDiscards OBJECT-TYPE Number of discard packets based on IPv4 received on the interface. | 1.3.6.1.4.1.25506.8.35.5.1.13.1.5 | Counter64 | read-only | current |
| hh3cifIPv4InErrors OBJECT-TYPE Number of error packets based on IPv4 received on the interface. | 1.3.6.1.4.1.25506.8.35.5.1.13.1.6 | Counter64 | read-only | current |
| hh3cifIPv4OutOctets OBJECT-TYPE Number of octets based on IPv4 transmitted out of the interface. | 1.3.6.1.4.1.25506.8.35.5.1.13.1.7 | Counter64 | read-only | current |
| hh3cifIPv4OutUcastPkts OBJECT-TYPE Number of unicast packets based on IPv4 transmitted out of the interface. | 1.3.6.1.4.1.25506.8.35.5.1.13.1.8 | Counter64 | read-only | current |
| hh3cifIPv4OutMultiPkts OBJECT-TYPE Number of multicast packets based on IPv4 transmitted out of the interface. | 1.3.6.1.4.1.25506.8.35.5.1.13.1.9 | Counter64 | read-only | current |
| hh3cifIPv4OutBroadcastPkts OBJECT-TYPE Number of broadcast packets based on IPv4 transmitted out of the interface. | 1.3.6.1.4.1.25506.8.35.5.1.13.1.10 | Counter64 | read-only | current |
| hh3cifIPv4OutDiscards OBJECT-TYPE Number of discard packets based on IPv4 transmitted out of the interface. | 1.3.6.1.4.1.25506.8.35.5.1.13.1.11 | Counter64 | read-only | current |
| hh3cifIPv4OutErrors OBJECT-TYPE Number of error packets based on IPv4 transmitted out of the interface. | 1.3.6.1.4.1.25506.8.35.5.1.13.1.12 | Counter64 | read-only | current |
| hh3cifIPv6InOctets OBJECT-TYPE Number of octets based on IPv6 received on the interface. | 1.3.6.1.4.1.25506.8.35.5.1.13.1.13 | Counter64 | read-only | current |
| hh3cifIPv6InUcastPkts OBJECT-TYPE Number of unicast packets based on IPv6 received on the interface. | 1.3.6.1.4.1.25506.8.35.5.1.13.1.14 | Counter64 | read-only | current |
| hh3cifIPv6InMultiPkts OBJECT-TYPE Number of multicast packets based on IPv6 received on the interface. | 1.3.6.1.4.1.25506.8.35.5.1.13.1.15 | Counter64 | read-only | current |
| hh3cifIPv6InAnycastPkts OBJECT-TYPE Number of anycast packets based on IPv6 received on the interface. | 1.3.6.1.4.1.25506.8.35.5.1.13.1.16 | Counter64 | read-only | current |
| hh3cifIPv6InDiscards OBJECT-TYPE Number of discard packets based on IPv6 received on the interface. | 1.3.6.1.4.1.25506.8.35.5.1.13.1.17 | Counter64 | read-only | current |
| hh3cifIPv6InErrors OBJECT-TYPE Number of error packets based on IPv6 received on the interface. | 1.3.6.1.4.1.25506.8.35.5.1.13.1.18 | Counter64 | read-only | current |
| hh3cifIPv6OutOctets OBJECT-TYPE Number of octets based on IPv6 transmitted of the interface. | 1.3.6.1.4.1.25506.8.35.5.1.13.1.19 | Counter64 | read-only | current |
| hh3cifIPv6OutUcastPkts OBJECT-TYPE Number of unicast packets based on IPv6 transmitted out of the interface. | 1.3.6.1.4.1.25506.8.35.5.1.13.1.20 | Counter64 | read-only | current |
| hh3cifIPv6OutMultiPkts OBJECT-TYPE Number of multicast packets based on IPv6 transmitted out of the interface. | 1.3.6.1.4.1.25506.8.35.5.1.13.1.21 | Counter64 | read-only | current |
| hh3cifIPv6OutAnycastPkts OBJECT-TYPE Number of anycast packets based on IPv6 transmitted out of the interface. | 1.3.6.1.4.1.25506.8.35.5.1.13.1.22 | Counter64 | read-only | current |
| hh3cifIPv6OutDiscards OBJECT-TYPE Number of discard packets based on IPv6 transmitted out of the interface. | 1.3.6.1.4.1.25506.8.35.5.1.13.1.23 | Counter64 | read-only | current |
| hh3cifIPv6OutErrors OBJECT-TYPE Number of error packets based on IPv6 transmitted out of the interface. | 1.3.6.1.4.1.25506.8.35.5.1.13.1.24 | Counter64 | read-only | current |