MIBs Depot

HH3C-EOC-COMMON-MIB

Registered at
1.3.6.1.4.1.25506.2.83
Last updated
2007-09-11 10:08
Organization
New H3C Tech. Co., Ltd.
Namespace
comware
Source file
HH3C-EOC-COMMON-MIB
Digest
sha256:eeb8c4ce82d728639eb50d0c9a23b4c6b4ab79a2ca078864422f6d1dcded9ab4

Description

The objects in this MIB module are used to manage and display common configuration between Ethernet Passive Optical Network (EOC) port which are based on the Ethernet in the First Mile (EFM) Passive Optical Network(PON) as defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65.. and Ethernet Over Cable (EOC) which is based on HomePlug AV Specification.

Contact

SMB EOC Team New H3C Technologies Co., Ltd. Shang-Di Information Industry Base, Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:310053.

Imports

FromSymbols
HH3C-HPEOC-MIBhh3cHPEOCDownLoadCNUFWResult
HH3C-OID-MIBhh3cCommon
IANAifType-MIBIANAifType
IF-MIBifDescr, ifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIGauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HH3C-EOC-COMMON-MIB
HH3C-HPEOC-MIB
HH3C-OID-MIB
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hh3cEOCCommonSysMan
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.83.1
hh3cEOCCommonSysScalarObjects
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.83.1.1
hh3cEOCCommonSysVersion
OBJECT-TYPE
Eoc version. If the object length is zero, it means the version is unknown. The length is up to 1024.
1.3.6.1.4.1.25506.2.83.1.1.1OCTET STRINGread-onlycurrent
hh3cEOCCommonUpLinkMacAddress
OBJECT-TYPE
EOC CLT's uplink device's mac address.
1.3.6.1.4.1.25506.2.83.1.1.2MacAddressread-onlycurrent
hh3cEOCCommonCltMan
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.83.2
hh3cEOCCommonCltManTable
OBJECT-TYPE
This table defines the primary parameters of the CLT configuration.
1.3.6.1.4.1.25506.2.83.2.1not-accessiblecurrent
hh3cEOCCommonCltManEntry
OBJECT-TYPE
The entry of the table hh3cEOCCommonCltManTable.
1.3.6.1.4.1.25506.2.83.2.1.1not-accessiblecurrent
hh3cEOCCommonCltAutoAuthorize
OBJECT-TYPE
This value determines whether software performs self-authorization for each Cable Network Unit(CNU) registering to the network. Setting it to false means for every CNU registering, software requires external authorization, and until it's done the CNU is not authenticated. True value means software authorizes each CNU registering to the network automatically.
1.3.6.1.4.1.25506.2.83.2.1.1.1TruthValueread-writecurrent
hh3cEOCCommonCltMaxAllowToAccess
OBJECT-TYPE
This value determines how many CNU can be bound in this CLT. If the number of CNU is more than this value , then the rest of CNU should not be allow to access.
1.3.6.1.4.1.25506.2.83.2.1.1.2Integer32read-writecurrent
hh3cEOCComCnuMan
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.83.3
hh3cEOCComCnuScalarObjects
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.83.3.1
hh3cEOCComCnuMaxDownBWMinVal
OBJECT-TYPE
The lower limit of total-bandwidth which is confined to hh3cEOCComCnuMaxDownBW.
1.3.6.1.4.1.25506.2.83.3.1.1Integer32read-onlycurrent
hh3cEOCComCnuMaxDownBWMaxVal
OBJECT-TYPE
The upper limit of total-bandwidth which is confined to hh3cEOCComCnuMaxDownBW.
1.3.6.1.4.1.25506.2.83.3.1.2Integer32read-onlycurrent
hh3cEOCComCnuSlaHighPriBWMinVal
OBJECT-TYPE
The lower limit of high priority bandwidth which is confined to hh3cEOCComCnuSlaHighPriBW.
1.3.6.1.4.1.25506.2.83.3.1.3Integer32read-onlycurrent
hh3cEOCComCnuSlaHighPriBWMaxVal
OBJECT-TYPE
The upper limit of high priority bandwidth which is confined to hh3cEOCComCnuSlaHighPriBW.
1.3.6.1.4.1.25506.2.83.3.1.4Integer32read-onlycurrent
hh3cEOCComCnuMaxUpBWMinVal
OBJECT-TYPE
The lower limit of total-bandwidth which is confined to hh3cEOCComCnuMaxUpBW.
1.3.6.1.4.1.25506.2.83.3.1.5Integer32read-onlycurrent
hh3cEOCComCnuMaxUpBWMaxVal
OBJECT-TYPE
The upper limit of total-bandwidth which is confined to hh3cEOCComCnuMaxUpBW.
1.3.6.1.4.1.25506.2.83.3.1.6Integer32read-onlycurrent
hh3cEOCComCnuAttenThrA
OBJECT-TYPE
The value of cnu's average attenuation good level thresholds.
1.3.6.1.4.1.25506.2.83.3.1.7Integer32read-writecurrent
hh3cEOCComCnuAttenThrB
OBJECT-TYPE
The value of cnu's average attenuation normal level thresholds.
1.3.6.1.4.1.25506.2.83.3.1.8Integer32read-writecurrent
hh3cEOCComCnuRateDropThr
OBJECT-TYPE
The value of cnu's Tx/Rx rate drop thresholds.
1.3.6.1.4.1.25506.2.83.3.1.9Integer32read-writecurrent
hh3cEOCComCnuSysManTable
OBJECT-TYPE
This table implements the management of CNUs(Coax Network Unit).
1.3.6.1.4.1.25506.2.83.3.2not-accessiblecurrent
hh3cEOCComCnuSysManEntry
OBJECT-TYPE
The entry of the table hh3cEOCComCnuSysManTable.
1.3.6.1.4.1.25506.2.83.3.2.1not-accessiblecurrent
hh3cEOCComCnuCableIfindex
OBJECT-TYPE
The index of cable port which uniquely identifies the cable port of one device.
1.3.6.1.4.1.25506.2.83.3.2.1.1Integer32read-onlycurrent
hh3cEOCComCnuDeviceType
OBJECT-TYPE
The type of the EOC CNU(Coax Network Unit).
1.3.6.1.4.1.25506.2.83.3.2.1.2DisplayStringread-writecurrent
hh3cEOCComCnuDeviceAlias
OBJECT-TYPE
EOC CNU's alias which display as the device's name, it's recommended to set it uniquely and understandably.
1.3.6.1.4.1.25506.2.83.3.2.1.3DisplayStringread-writecurrent
hh3cEOCComCnuDescr
OBJECT-TYPE
User's description, including user's address, name, telephone number and so on.
1.3.6.1.4.1.25506.2.83.3.2.1.4DisplayStringread-writecurrent
hh3cEOCComCnuUpTime
OBJECT-TYPE
The time since the CNU last registered to the network.
1.3.6.1.4.1.25506.2.83.3.2.1.5TimeTicksread-onlycurrent
hh3cEOCComCnuVLANType
OBJECT-TYPE
port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port.
1.3.6.1.4.1.25506.2.83.3.2.1.6INTEGER {vLANTrunk(1), access(2), hybrid(3), fabric(4)}read-writecurrent
hh3cEOCComCnuPvid
OBJECT-TYPE
The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on cable interface.
1.3.6.1.4.1.25506.2.83.3.2.1.7Integer32 (1..4094)read-writecurrent
hh3cEOCComCnuVlanTag
OBJECT-TYPE
VLAN is set tagged or untagged on cable interface.
1.3.6.1.4.1.25506.2.83.3.2.1.8INTEGER {tagged(1), untagged(2)}read-writecurrent
hh3cEOCComCnuReset
OBJECT-TYPE
This variable is used to reset the CNU device. The interface may be unavailable while the reset occurs and data may be lost. During reading operation it returns the state of the CNU device. running(1) indicates and operates normal operation, reset(2) indicates and operates reset mode. Writing can be done all the time.
1.3.6.1.4.1.25506.2.83.3.2.1.9INTEGER {running(1), reset(2)}read-writecurrent
hh3cEOCComCnuDeregister
OBJECT-TYPE
deregister CNU.
1.3.6.1.4.1.25506.2.83.3.2.1.10INTEGER {deregister(1)}read-writecurrent
hh3cEOCComCnuSave
OBJECT-TYPE
Save the UNI and CNU related configurations to the CNU.
1.3.6.1.4.1.25506.2.83.3.2.1.11INTEGER {save(1), running(2)}read-writecurrent
hh3cEOCComCnuAccess
OBJECT-TYPE
Control whether the user can access to the network.
1.3.6.1.4.1.25506.2.83.3.2.1.12INTEGER {access(1), notaccess(2)}read-writecurrent
hh3cEOCComCnuMacTable
OBJECT-TYPE
This table implements the management of CNUs.
1.3.6.1.4.1.25506.2.83.3.3not-accessiblecurrent
hh3cEOCComCnuMacEntry
OBJECT-TYPE
The entry of the table hh3cEOCComCnuMacTable.
1.3.6.1.4.1.25506.2.83.3.3.1not-accessiblecurrent
hh3cEOCComCnuMacAddress
OBJECT-TYPE
EOC CNU's MAC address.
1.3.6.1.4.1.25506.2.83.3.3.1.1MacAddressread-createcurrent
hh3cEOCComCnuRowStatus
OBJECT-TYPE
Operation status.
1.3.6.1.4.1.25506.2.83.3.3.1.2RowStatusread-createcurrent
hh3cEOCComCnuTempIndex
OBJECT-TYPE
EOC CNU's model index from hh3cHPEOCTemplateIndex, If configure 0, the CNU select no model.
1.3.6.1.4.1.25506.2.83.3.3.1.3Integer32read-writecurrent
hh3cEOCComCnuInfoTable
OBJECT-TYPE
Primary status of the specified CNU. There will be one row in this table for each information in the system.
1.3.6.1.4.1.25506.2.83.3.4not-accessiblecurrent
hh3cEOCComCnuInfoEntry
OBJECT-TYPE
The entry of the hh3cEOCComCnuInfoTable.
1.3.6.1.4.1.25506.2.83.3.4.1not-accessiblecurrent
hh3cEOCComCnuHardwareVersion
OBJECT-TYPE
EOC CNU's hardware version. If the object length is zero, it means the version is unknown.
1.3.6.1.4.1.25506.2.83.3.4.1.1DisplayStringread-onlycurrent
hh3cEOCComCnuPCBVersion
OBJECT-TYPE
EOC CNU's PCB version.
1.3.6.1.4.1.25506.2.83.3.4.1.2OCTET STRING (SIZE(0..255))read-onlycurrent
hh3cEOCComCnuLinkState
OBJECT-TYPE
The cable port's link state. The physicaldown(1) state indicates that the CNU is not powered on. The linkdown(2) state indicates that the CNU is powered on, but registers fail. The linkup(3) state indicates that the CNU is powered on, and registers successful. The loopback(4) state indecates that the CNU is powered on and registers successful, but loopback has detected.
1.3.6.1.4.1.25506.2.83.3.4.1.3INTEGER {physicaldown(1), linkdown(2), linkup(3), loopback(4)}read-onlycurrent
hh3cEOCComCnuAttenuation
OBJECT-TYPE
The cnu's average attenuation.
1.3.6.1.4.1.25506.2.83.3.4.1.4Integer32read-onlycurrent
hh3cEOCComCnuSoftwareVersion
OBJECT-TYPE
EOC CNU's software version. If the object length is zero, it means the version is unknown.
1.3.6.1.4.1.25506.2.83.3.4.1.5DisplayStringread-onlycurrent
hh3cEOCComCnuTxRate
OBJECT-TYPE
The cnu's capability of tx speed in unit of 1Mbps.
1.3.6.1.4.1.25506.2.83.3.4.1.6Integer32read-onlycurrent
hh3cEOCComCnuRxRate
OBJECT-TYPE
The cnu's capability of rx speed in unit of 1Mbps.
1.3.6.1.4.1.25506.2.83.3.4.1.7Integer32read-onlycurrent
hh3cEOCComCnuTxRateDrop
OBJECT-TYPE
The cnu's capability droping of tx speed from it's history max value in unit of %.
1.3.6.1.4.1.25506.2.83.3.4.1.8Integer32read-onlycurrent
hh3cEOCComCnuRxRateDrop
OBJECT-TYPE
The cnu's capability droping of rx speed from it's history max value in unit of %.
1.3.6.1.4.1.25506.2.83.3.4.1.9Integer32read-onlycurrent
hh3cEOCComCnuBandWidthTable
OBJECT-TYPE
Set bandwidth parameters.
1.3.6.1.4.1.25506.2.83.3.5not-accessiblecurrent
hh3cEOCComCnuBandWidthEntry
OBJECT-TYPE
The entry of table hh3cEOCComCnuBandWidthTable. It is a pre-configuration.
1.3.6.1.4.1.25506.2.83.3.5.1not-accessiblecurrent
hh3cEOCComCnuMaxDownBW
OBJECT-TYPE
Maximum bandwidth allowed for the CNU, measured in Kbit/s.
1.3.6.1.4.1.25506.2.83.3.5.1.1Integer32read-writecurrent
hh3cEOCComCnuSlaHighPriBW
OBJECT-TYPE
High priority bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hh3cEOCComCnuMaxUpBW. The high priority bandwidth should not be larger than the maximum bandwidth.
1.3.6.1.4.1.25506.2.83.3.5.1.2Integer32read-writecurrent
hh3cEOCComCnuMaxUpBW
OBJECT-TYPE
Total bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hh3cEOCComCnuSlaHighPriBW. The total bandwidth should be larger than the high priority bandwidth.
1.3.6.1.4.1.25506.2.83.3.5.1.3Integer32read-writecurrent
hh3cEOCComUniMan
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.83.4
hh3cEOCComUniManTable
OBJECT-TYPE
This table defines several user network interface(UNI) system parameters.
1.3.6.1.4.1.25506.2.83.4.1not-accessiblecurrent
hh3cEOCComUniManEntry
OBJECT-TYPE
The entry of hh3cEOCComUniManTable.
1.3.6.1.4.1.25506.2.83.4.1.1not-accessiblecurrent
hh3cEOCUniIndex
OBJECT-TYPE
The index value which uniquely identifies the FE(Fast Ethernet) interface of the CNU.
1.3.6.1.4.1.25506.2.83.4.1.1.1Unsigned32not-accessiblecurrent
hh3cEOCComUniDescr
OBJECT-TYPE
A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware and software.
1.3.6.1.4.1.25506.2.83.4.1.1.2DisplayStringread-onlycurrent
hh3cEOCComUniStatus
OBJECT-TYPE
The desired state of the user network interface. When a managed system initializes, all user network interfaces start with down state. The testing state indicates that no operational packets can be passed. As a result of either explicit management action or per configuration information retained by the managed system, hh3cEOCComUniStatus is then changed to either the up or testing states (or remains in the down state).
1.3.6.1.4.1.25506.2.83.4.1.1.3INTEGER {up(1), down(2), testing(3)}read-writecurrent
hh3cEOCComUniSpeed
OBJECT-TYPE
User network interface speed.
1.3.6.1.4.1.25506.2.83.4.1.1.4INTEGER {auto(1), s10M(10), s100M(100)}read-writecurrent
hh3cEOCComUniDuplex
OBJECT-TYPE
User network interface mode.
1.3.6.1.4.1.25506.2.83.4.1.1.5INTEGER {full(1), half(2), auto(3)}read-writecurrent
hh3cEOCComUniCurrentSpeed
OBJECT-TYPE
An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295). For a sub-layer which has no concept of bandwidth, this object should be zero.
1.3.6.1.4.1.25506.2.83.4.1.1.6Gauge32read-onlycurrent
hh3cEOCComUniCurrentDuplex
OBJECT-TYPE
The current mode of operation of the MAC entity. 'unknown' indicates that the current duplex mode could not be determined. Management control of the duplex mode is accomplished through the MAU MIB. When an interface does not support autonegotiation, or when autonegotiation is not enabled, the duplex mode is controlled using ifMauDefaultType. When autonegotiation is supported and enabled, duplex mode is controlled using ifMauAutoNegAdvertisedBits. In either case, the currently operating duplex mode is reflected both in this object and in ifMauType. Note that this object provides redundant information with ifMauType. Normally, redundant objects are discouraged. However, in this instance, it allows a management application to determine the duplex status of an interface without having to know every possible value of ifMauType. This was felt to be sufficiently valuable to justify the redundancy.
1.3.6.1.4.1.25506.2.83.4.1.1.7INTEGER {full(1), half(2), unknown(3)}read-onlycurrent
hh3cEOCComUniMdi
OBJECT-TYPE
Type of the line connected to UNI interface: mdi-ii(straight-through cable), mdi-x (crossover cable), mdi-auto (auto-sensing).
1.3.6.1.4.1.25506.2.83.4.1.1.8INTEGER {mdi-ii(1), mdi-x(2), mdi-auto(3)}read-writecurrent
hh3cEOCComUniFlowControl
OBJECT-TYPE
Flow control status. true(1) - Flow control status enable. false(2) - Flow control status disable.
1.3.6.1.4.1.25506.2.83.4.1.1.9TruthValueread-writecurrent
hh3cEOCComUniCountReset
OBJECT-TYPE
Reset the counter which is about packets of the interface, then the counter will change to zero. There is no sense in reading this object.
1.3.6.1.4.1.25506.2.83.4.1.1.10INTEGER {reset(1)}read-writecurrent
hh3cEOCComUniAlias
OBJECT-TYPE
This object is an 'alias' name for the interface as specified by a network manager, and provides a non- volatile 'handle' for the interface. On the first instantiation of an interface, the value of hh3cEOCComUniAlias associated with that interface is the zero-length string. As and when a value is written into an instance of hh3cEOCComUniAlias through a network management set operation, then the agent must retain the supplied value in the hh3cEOCComUniAlias instance associated with the same interface for as long as that interface remains instantiated, including across all re- initializations/reboots of the network management system, including those which result in a change of the interface's ifIndex and hh3cEOCUniIndex value. An example of the value which a network manager might store in this object for a WAN interface is the (Telco's) circuit number/identifier of the interface. Some agents may support write-access only for interfaces having particular values of hh3cEOCComUniType. An agent which supports write access to this object is required to keep the value in non-volatile storage, but it may limit the length of new values depending on how much storage is already occupied by the current values for other interfaces.
1.3.6.1.4.1.25506.2.83.4.1.1.11DisplayStringread-writecurrent
hh3cEOCComUniType
OBJECT-TYPE
The type of interface. Additional values for hh3cEOCComUniType are assigned by the Internet Assigned Numbers Authority(IANA), through updating the syntax of the IANAifType textual convention.
1.3.6.1.4.1.25506.2.83.4.1.1.12IANAifTyperead-onlycurrent
hh3cEOCComUniVLANType
OBJECT-TYPE
port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port.
1.3.6.1.4.1.25506.2.83.4.1.1.13INTEGER {vLANTrunk(1), access(2), hybrid(3), fabric(4)}read-writecurrent
hh3cEOCComUniPvid
OBJECT-TYPE
The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on this port.
1.3.6.1.4.1.25506.2.83.4.1.1.14Integer32 (1..4094)read-writecurrent
hh3cEOCComUniVlanTag
OBJECT-TYPE
VLAN is set tagged or untagged.
1.3.6.1.4.1.25506.2.83.4.1.1.15INTEGER {tagged(1), untagged(2)}read-writecurrent
hh3cEOCComUniPriority
OBJECT-TYPE
The default ingress User Priority for this port. This only has effect on media, such as Ethernet, that do not support native User Priority.
1.3.6.1.4.1.25506.2.83.4.1.1.16Integer32 (0..7)read-writecurrent
hh3cEOCComUniUpLineRate
OBJECT-TYPE
The max speed upload in units of 1,000 bits per second on this interface. The value should between 0 and 100Mbps. If the value is 0, it means that the upload speed is only restricted by the physical line.
1.3.6.1.4.1.25506.2.83.4.1.1.17Unsigned32read-writecurrent
hh3cEOCComUniDownLineRate
OBJECT-TYPE
The max speed download in units of 1,000 bits per second on this interface. The value should between 0 and 100Mbps. If the value is 0, it means that the download speed is only restricted by the physical line.
1.3.6.1.4.1.25506.2.83.4.1.1.18Unsigned32read-writecurrent
hh3cEOCComUniAdminStatus
OBJECT-TYPE
Control if open or close the UNI. If choose up(1), means the UNI is opened and packets can pass it. If choose down(2), means the UNI is closed and all packets will be discard.
1.3.6.1.4.1.25506.2.83.4.1.1.19INTEGER {up(1), down(2)}read-writecurrent
hh3cEOCComUniCountTable
OBJECT-TYPE
A list of interface counter about frames entries.
1.3.6.1.4.1.25506.2.83.4.2not-accessiblecurrent
hh3cEOCComUniCountEntry
OBJECT-TYPE
An entry containing management information applicable to a particular interface.
1.3.6.1.4.1.25506.2.83.4.2.1not-accessiblecurrent
hh3cEOCUniInPkts
OBJECT-TYPE
The total number of packets (including bad packets, broadcast packets, and multicast packets) received.
1.3.6.1.4.1.25506.2.83.4.2.1.1Unsigned32read-onlycurrent
hh3cEOCUniInUPkts
OBJECT-TYPE
The total number of good packets received that are directed to the unicast address. Note that this does not include multicast and broadcast packets.
1.3.6.1.4.1.25506.2.83.4.2.1.2Unsigned32read-onlycurrent
hh3cEOCUniInBPkts
OBJECT-TYPE
The total number of good packets received that are directed to the broadcast address. Note that this does not include multicast packets.
1.3.6.1.4.1.25506.2.83.4.2.1.3Unsigned32read-onlycurrent
hh3cEOCUniInMPkts
OBJECT-TYPE
The total number of good packets received that are directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
1.3.6.1.4.1.25506.2.83.4.2.1.4Unsigned32read-onlycurrent
hh3cEOCUniInPausePkts
OBJECT-TYPE
A count of MAC Control packets received on this interface by the pause(flow control) operation. This counter does not increment when the interface is in a half-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system.
1.3.6.1.4.1.25506.2.83.4.2.1.5Unsigned32read-onlycurrent
hh3cEOCUniInTotalErrors
OBJECT-TYPE
Total count of the error packets received on this interface.
1.3.6.1.4.1.25506.2.83.4.2.1.6Unsigned32read-onlycurrent
hh3cEOCUniInCRCErrs
OBJECT-TYPE
The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
1.3.6.1.4.1.25506.2.83.4.2.1.7Unsigned32read-onlycurrent
hh3cEOCUniInUndersizePkts
OBJECT-TYPE
The total number of packets received that are less than 64 octets long (excluding framing bits, but including FCS octets) and are otherwise well formed.
1.3.6.1.4.1.25506.2.83.4.2.1.8Unsigned32read-onlycurrent
hh3cEOCUniInOversizePkts
OBJECT-TYPE
The total number of packets received that are longer than 1518 octets (excluding framing bits, but including FCS octets) and are otherwise well formed.
1.3.6.1.4.1.25506.2.83.4.2.1.9Unsigned32read-onlycurrent
hh3cEOCUniInErrorbyOther
OBJECT-TYPE
The total number of other error packets received on this interface.
1.3.6.1.4.1.25506.2.83.4.2.1.10Unsigned32read-onlycurrent
hh3cEOCUniInOctets
OBJECT-TYPE
The total number of octets received on this interface.
1.3.6.1.4.1.25506.2.83.4.2.1.11Unsigned32read-onlycurrent
hh3cEOCUniOutPkts
OBJECT-TYPE
The total number of packets (including bad packets, broadcast packets, and multicast packets) sent.
1.3.6.1.4.1.25506.2.83.4.2.1.12Unsigned32read-onlycurrent
hh3cEOCUniOutUPkts
OBJECT-TYPE
The total number of good packets sent that are directed to the unicast address. Note that this does not include multicast and broadcast packets.
1.3.6.1.4.1.25506.2.83.4.2.1.13Unsigned32read-onlycurrent
hh3cEOCUniOutBPkts
OBJECT-TYPE
The total number of good packets sent that are directed to the broadcast address. Note that this does not include multicast packets.
1.3.6.1.4.1.25506.2.83.4.2.1.14Unsigned32read-onlycurrent
hh3cEOCUniOutMPkts
OBJECT-TYPE
The total number of good packets sent that are directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
1.3.6.1.4.1.25506.2.83.4.2.1.15Unsigned32read-onlycurrent
hh3cEOCUniOutPausePkts
OBJECT-TYPE
The total number of MAC control packets sent on this interface by the pause operation. This counter does not increment when the interface is in a half-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system.
1.3.6.1.4.1.25506.2.83.4.2.1.16Unsigned32read-onlycurrent
hh3cEOCUniOutTotalErrors
OBJECT-TYPE
The total number of error packets sent on this interface.
1.3.6.1.4.1.25506.2.83.4.2.1.17Unsigned32read-onlycurrent
hh3cEOCUniOutCollisions
OBJECT-TYPE
The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment could. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected.
1.3.6.1.4.1.25506.2.83.4.2.1.18Unsigned32read-onlycurrent
hh3cEOCUniOutDelayExceedDsds
OBJECT-TYPE
The number of packets discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges.
1.3.6.1.4.1.25506.2.83.4.2.1.19Unsigned32read-onlycurrent
hh3cEOCUniOutErrorbyOther
OBJECT-TYPE
The total number of other error packets sent on this interface. Other error packets means the error packets out of collision packets and excessive delayed packets.
1.3.6.1.4.1.25506.2.83.4.2.1.20Unsigned32read-onlycurrent
hh3cEOCUniOutDroppedFrames
OBJECT-TYPE
The total number of frames dropped because of buffer failure.
1.3.6.1.4.1.25506.2.83.4.2.1.21Unsigned32read-onlycurrent
hh3cEOCUniOutOctets
OBJECT-TYPE
The total number of octets transmitted out of the interface.
1.3.6.1.4.1.25506.2.83.4.2.1.22Unsigned32read-onlycurrent
hh3cEOCCommonTrap
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.83.5
hh3cEOCTrapPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.83.5.0
hh3cEOCComOnLineCnuMan
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.83.6
hh3cEOCComCnuTypeTable
OBJECT-TYPE
This table defines the description of cnu typ.
1.3.6.1.4.1.25506.2.83.6.1not-accessiblecurrent
hh3cEOCComCnuTypeEntry
OBJECT-TYPE
The entry of the table hh3cEOCComCnuTypeTable.
1.3.6.1.4.1.25506.2.83.6.1.1not-accessiblecurrent
hh3cEOCComCnuTypeIdx
OBJECT-TYPE
A unique value for each cnu types. Its value ranges between 1 and the value of cny typess.
1.3.6.1.4.1.25506.2.83.6.1.1.1Unsigned32not-accessiblecurrent
hh3cEOCComCnuDescripton
OBJECT-TYPE
The description for unique cnu types.
1.3.6.1.4.1.25506.2.83.6.1.1.2DisplayStringread-onlycurrent
hh3cEOCComCnuNumTable
OBJECT-TYPE
This table defines the number of cnu registered in variable types of the CLT .
1.3.6.1.4.1.25506.2.83.6.2not-accessiblecurrent
hh3cEOCComCnuNumEntry
OBJECT-TYPE
The entry of the table hh3cEOCComCnuNumTable.
1.3.6.1.4.1.25506.2.83.6.2.1not-accessiblecurrent
hh3cEOCComCnuNumber
OBJECT-TYPE
The number of special type of cnu that has been registerd in clt.
1.3.6.1.4.1.25506.2.83.6.2.1.1Integer32read-onlycurrent

Notifications

NameOIDStatus
hh3cEOCCnuRegExcessTrap
NOTIFICATION-TYPE
A hh3cEOCCnuRegExcessTrap notification is sent when the number of registered CNUs exceeds the limit.
1.3.6.1.4.1.25506.2.83.5.0.1current
hh3cEOCCnuRegExcessRecoverTrap
NOTIFICATION-TYPE
A hh3cEOCCnuRegExcessRecoverTrap notification is sent when hh3cEOCCnuRegExcessTrap is detected and then recoverd.
1.3.6.1.4.1.25506.2.83.5.0.2current
hh3cEOCCnuRegSuccTrap
NOTIFICATION-TYPE
A hh3cEOCCnuRegSuccTrap notification is sent when a CNU registers successful.
1.3.6.1.4.1.25506.2.83.5.0.3current
hh3cEOCCnuOffLineTrap
NOTIFICATION-TYPE
A hh3cEOCCnuOffLineTrap notification is sent when a CNU offline.
1.3.6.1.4.1.25506.2.83.5.0.4current
hh3cEOCCnuLinkupTrap
NOTIFICATION-TYPE
A hh3cEOCCnuLinkupTrap notification is sent when a CNU linkup.
1.3.6.1.4.1.25506.2.83.5.0.5current
hh3cEOCOamDisconnectTrap
NOTIFICATION-TYPE
A hh3cEOCOamDisconnectionTrap notification is sent when LLID's OAM link is disconnected.
1.3.6.1.4.1.25506.2.83.5.0.6current
hh3cEOCOamDisconnectRecoverTrap
NOTIFICATION-TYPE
A hh3cEOCOamDisconnectionRecoverTrap notification is sent when LLID's OAM link is disconnected and then connected.
1.3.6.1.4.1.25506.2.83.5.0.7current
hh3cEOCBandwidthNotEnoughTrap
NOTIFICATION-TYPE
Bandwidth is not enough, cnu can not bind now.
1.3.6.1.4.1.25506.2.83.5.0.8current
hh3cEOCCnuAttenuationTrap
NOTIFICATION-TYPE
A hh3cHPEOCCnuAttenuationTrap notification is sent when a CNU's attenuation is changing.
1.3.6.1.4.1.25506.2.83.5.0.9current
hh3cEOCCnuRegFailTrap
NOTIFICATION-TYPE
A hh3cEOCCnuRegFailTrap notification is sent when a CNU registers fail.
1.3.6.1.4.1.25506.2.83.5.0.10current
hh3cEOCCLTCablePortErrorTrap
NOTIFICATION-TYPE
A hh3cEOCCLTCablePortErrorTrap notification is sent when the hardware of cable port occurs error or CLT's vlan is configged error.
1.3.6.1.4.1.25506.2.83.5.0.11current
hh3cEOCCLTCablePortErrReTrap
NOTIFICATION-TYPE
A hh3cEOCCLTCablePortErrReTrap notification is sent when cable port error and then recovered.
1.3.6.1.4.1.25506.2.83.5.0.12current
hh3cEOCCnuTxRateDropTrap
NOTIFICATION-TYPE
A hh3cEOCCnuTxRateDropTrap notification is sent when cable port rate of TX capability drop exceeded threshold.
1.3.6.1.4.1.25506.2.83.5.0.13current
hh3cEOCCnuTxRateDropRecoverTrap
NOTIFICATION-TYPE
A hh3cEOCCnuTxRateDropRecoverTrap notification is sent when cable port rate of TX capability recover from the recent rate-drop trap.
1.3.6.1.4.1.25506.2.83.5.0.14current
hh3cEOCCnuRxRateDropTrap
NOTIFICATION-TYPE
A hh3cEOCCnuRxRateDropTrap notification is sent when cable port rate of RX capability drop exceeded threshold.
1.3.6.1.4.1.25506.2.83.5.0.15current
hh3cEOCCnuRxRateDropRecoverTrap
NOTIFICATION-TYPE
A hh3cEOCCnuRxRateDropRecoverTrap notification is sent when cable port rate of RX capability recover from the recent rate-drop trap.
1.3.6.1.4.1.25506.2.83.5.0.16current
hh3cEOCCnuFWDownLoadErrTrap
NOTIFICATION-TYPE
A hh3cEOCCnuFWDownLoadErrTrap notification is sent when CLT can't download CNU firmware from the server successfully.
1.3.6.1.4.1.25506.2.83.5.0.17current
hh3cEOCCnuFWDownLoadErrReTrap
NOTIFICATION-TYPE
A hh3cEOCCnuFWDownLoadErrReTrap notification is sent when CLT recover from the download CNU firmware error.
1.3.6.1.4.1.25506.2.83.5.0.18current
hh3cEOCCnuDeviceTypeErrTrap
NOTIFICATION-TYPE
A hh3cEOCCnuDeviceTypeErrTrap notification is sent when the online CNU doesn't match the type which user defined earlier.
1.3.6.1.4.1.25506.2.83.5.0.19current
hh3cEOCCnuDeviceTypeErrReTrap
NOTIFICATION-TYPE
A hh3cEOCCnuDeviceTypeErrReTrap notification is sent when the online CNU doesn't match the type which user defined earlier and then recover.
1.3.6.1.4.1.25506.2.83.5.0.20current
hh3cEOCCnuAutoUpdateErrTrap
NOTIFICATION-TYPE
A hh3cEOCCnuAutoUpdateErrTrap notification is sent when the online CNU doesn't auto update successfully.
1.3.6.1.4.1.25506.2.83.5.0.21current
hh3cEOCCnuAutoUpdateSuccTrap
NOTIFICATION-TYPE
A hh3cEOCCnuAutoUpdateSuccTrap notification is sent when the online CNU auto update successfully.
1.3.6.1.4.1.25506.2.83.5.0.22current
hh3cEOCLoopbackDetectTrap
NOTIFICATION-TYPE
A hh3cEOCLoopbackDetectTrap notification is sent when the loopback between the ethernet ports of CNU or CLT is found.
1.3.6.1.4.1.25506.2.83.5.0.23current
hh3cEOCLoopbackRecoverTrap
NOTIFICATION-TYPE
A hh3cEOCLoopbackRecoverTrap notification is sent when the loopback between the ethernet ports of CNU or CLT is recover.
1.3.6.1.4.1.25506.2.83.5.0.24current