H3C-STORAGE-SNAP-MIB
- Registered at
- 1.3.6.1.4.1.2011.10.10.2
- Last updated
- 2007-09-14 14:52
- Organization
- H3C Technologies Co., Ltd.
- Namespace
- huawei
- Source file
H3C-STORAGE-SNAP-MIB- Digest
sha256:824ee0b0937d8fe7cb19c9113da4142c91fc99a67149963bbfd86de6a31bdacb
Description
This MIB describes the general information about snap of storage device.
Contact
Platform Team H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R. China Http://www.h3c.com Zip:100085
Imports
| From | Symbols |
|---|---|
| ENTITY-MIB | entPhysicalIndex |
| H3C-STORAGE-REF-MIB | H3cExtendSelectPolicy, H3cLvIDType, H3cRaidIDType, H3cStorageActionType, H3cStorageEnableState, H3cStorageOnlineState, h3cStorageRef |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DateAndTime, DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ENTITY-MIB H3C-STORAGE-REF-MIB H3C-STORAGE-SNAP-MIB HUAWEI-3COM-OID-MIB IANA-ENTITY-MIB INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC UUID-TC-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| h3cSnapMibObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2011.10.10.2.1 | |||
| h3cGlobalSnapSettingsObject OBJECT-IDENTITY | 1.3.6.1.4.1.2011.10.10.2.1.1 | |||
| h3cAddtionalSpaceMaxSize OBJECT-TYPE This object identifies the maximal size of snapshot resource, safecache, and Continued replication Resource . | 1.3.6.1.4.1.2011.10.10.2.1.1.1 | Integer32 | read-only | current |
| h3cSnapConfigTable OBJECT-TYPE This table contains some entity to config the snapshot resources for special logic volumes. | 1.3.6.1.4.1.2011.10.10.2.1.2 | not-accessible | current | |
| h3cSnapConfigEntry OBJECT-TYPE An entry containing configuration about the snapshot resource. | 1.3.6.1.4.1.2011.10.10.2.1.2.1 | not-accessible | current | |
| h3cSnapLvIndex OBJECT-TYPE This object identifies the index of h3cSnapConfigTable. The object identified by this index is the same object as identified by the same value of h3cLvIndex. | 1.3.6.1.4.1.2011.10.10.2.1.2.1.1 | H3cLvIDType | not-accessible | current |
| h3cSnapAreaId OBJECT-TYPE This object identifies the snapshot resource of the logic volume. | 1.3.6.1.4.1.2011.10.10.2.1.2.1.2 | H3cLvIDType | read-only | current |
| h3cSnapAreaAutoExpand OBJECT-TYPE This object describes if the space of snapshot resource can be expanded automatically. | 1.3.6.1.4.1.2011.10.10.2.1.2.1.3 | H3cStorageEnableState | read-create | current |
| h3cSnapAreaThreshold OBJECT-TYPE If h3cSnapAreaAutoExpand is selected, the 'h3cSnapAreaThreshold' means the threshold of the snapshot resource. | 1.3.6.1.4.1.2011.10.10.2.1.2.1.4 | Integer32 (0..100) | read-create | current |
| h3cSnapAreaIncSize OBJECT-TYPE If h3cSnapAreaAutoExpand is selected, the 'h3cSnapAreaIncSize' means the amount of space to be allocated for each expansion. | 1.3.6.1.4.1.2011.10.10.2.1.2.1.5 | Integer32 | read-create | current |
| h3cSnapAreaMaxSize OBJECT-TYPE If h3cSnapAreaAutoExpand is selected, the 'h3cSnapAreaIncSize' means the max size of snapshot resource. | 1.3.6.1.4.1.2011.10.10.2.1.2.1.6 | Integer32 | read-create | current |
| h3cSnapAreaFullDeleteTM OBJECT-TYPE This object identifies if the snapshot resource is out of space and expand failed, if the system delete the old timemark until enough space or not. | 1.3.6.1.4.1.2011.10.10.2.1.2.1.7 | INTEGER {rotative(1), none(2)} | read-create | current |
| h3cSnapAreaNotify OBJECT-TYPE This object describes if a snapshot notification should be send to the client when the system create a timemark. | 1.3.6.1.4.1.2011.10.10.2.1.2.1.8 | H3cStorageEnableState | read-create | current |
| h3cSnapAreaStatus OBJECT-TYPE This object describes the state of the snapshot resource. | 1.3.6.1.4.1.2011.10.10.2.1.2.1.9 | H3cStorageOnlineState | read-only | current |
| h3cSnapRaidUuid OBJECT-TYPE This object describes the raid where the snapshot resource is created. | 1.3.6.1.4.1.2011.10.10.2.1.2.1.10 | H3cRaidIDType | read-create | current |
| h3cSnapRaidSize OBJECT-TYPE This object describes the size designated when the snapshot resource is created. | 1.3.6.1.4.1.2011.10.10.2.1.2.1.11 | Integer32 | read-only | current |
| h3cSnapRaidSelectPolicy OBJECT-TYPE This object describes the policy when the snapshot resource is created automatically. Note that the value can not be 'none' when the value of associated h3cSnapRaidUuid object is equal to null. | 1.3.6.1.4.1.2011.10.10.2.1.2.1.12 | H3cExtendSelectPolicy | read-create | current |
| h3cSnapAreaTotalSize OBJECT-TYPE This object identifies the current total size of the snapshot resource. | 1.3.6.1.4.1.2011.10.10.2.1.2.1.13 | Integer32 | read-only | current |
| h3cSnapAreaFreeSize OBJECT-TYPE This object identifies the free size of the snapshot resource. | 1.3.6.1.4.1.2011.10.10.2.1.2.1.14 | Integer32 | read-only | current |
| h3cSnapExtendTimes OBJECT-TYPE This object identifies the times the snapshot resource extended. | 1.3.6.1.4.1.2011.10.10.2.1.2.1.15 | Integer32 | read-only | current |
| h3cSnapRowStatus OBJECT-TYPE This object identifies the action of snapshot resource. Note that the assocai snapshot resource can not be delete when a snapshot copy is processing or the TimeMark is enabled, or the replication is enabled. | 1.3.6.1.4.1.2011.10.10.2.1.2.1.16 | RowStatus | read-create | current |
| h3cSnapExpandTable OBJECT-TYPE This table contains some entity to expand a snapshot resource. | 1.3.6.1.4.1.2011.10.10.2.1.3 | not-accessible | current | |
| h3cSnapExpandEntry OBJECT-TYPE An entry containing expand information applicable to the snapshot resource. | 1.3.6.1.4.1.2011.10.10.2.1.3.1 | not-accessible | current | |
| h3cSAExpRaidUuid OBJECT-TYPE This index is identical to h3cRaidUuid in H3C-RAID-MIB. | 1.3.6.1.4.1.2011.10.10.2.1.3.1.1 | H3cRaidIDType | not-accessible | current |
| h3cSAExpSize OBJECT-TYPE This object describes the increased size for snapshot resource when expanded. The units is million bytes. The value is always equal to zero when read. | 1.3.6.1.4.1.2011.10.10.2.1.3.1.2 | Integer32 | read-create | current |
| h3cSAExpRaidSize OBJECT-TYPE This object describes the size for snapshot resource on the raid. The units is million bytes. The value is always equal to zero when read. | 1.3.6.1.4.1.2011.10.10.2.1.3.1.3 | Integer32 | read-only | current |
| h3cSnapAreaExpRowStatus OBJECT-TYPE This object describes the actions to expand the size for snap. | 1.3.6.1.4.1.2011.10.10.2.1.3.1.4 | RowStatus | read-create | current |
| h3cSnapCopyTable OBJECT-TYPE This table contains some entity about snapshot copy. | 1.3.6.1.4.1.2011.10.10.2.1.4 | not-accessible | current | |
| h3cSnapCopyEntry OBJECT-TYPE An entry containing snapshot copy information applicable. | 1.3.6.1.4.1.2011.10.10.2.1.4.1 | not-accessible | current | |
| h3cSnapCopyLvIndex OBJECT-TYPE This object identifies the index of destination logic volume for snapshot copy. | 1.3.6.1.4.1.2011.10.10.2.1.4.1.1 | H3cLvIDType | read-write | current |
| h3cSnapCopyPercentage OBJECT-TYPE This object identifies the percentage of snapshot copy. The value is equal to zero if the snapshot copy has not started. When finished, the value is always equal to '100'. | 1.3.6.1.4.1.2011.10.10.2.1.4.1.2 | Integer32 (0..100) | read-only | current |
| h3cSnapCopyStartTime OBJECT-TYPE This object identifies the time to start the snapshot copy. | 1.3.6.1.4.1.2011.10.10.2.1.4.1.3 | DateAndTime | read-only | current |
| h3cSnapCopySwitch OBJECT-TYPE This object describes the actions to start or stop the snapshot copy. When read, the value of 'none' will be get. Note that if the snapshot resource of source logic volume has not been created, the action of snapshot copy will be refused by agent. | 1.3.6.1.4.1.2011.10.10.2.1.4.1.4 | INTEGER {start(1), stop(2), none(3)} | read-write | current |
| h3cTimeMarkConfigTable OBJECT-TYPE This table contains some entity to config a TimeMark on a special logic volume. | 1.3.6.1.4.1.2011.10.10.2.1.5 | not-accessible | current | |
| h3cTimeMarkConfigEntry OBJECT-TYPE An entry containing config information applicable to the TimeMark. | 1.3.6.1.4.1.2011.10.10.2.1.5.1 | not-accessible | current | |
| h3cTimeMarkCounts OBJECT-TYPE This object identifies the max num of TimeMark which can be configed. | 1.3.6.1.4.1.2011.10.10.2.1.5.1.1 | Integer32 (1..255) | read-write | current |
| h3cTimeMarkInitializeTime OBJECT-TYPE This object identifies the date and time when the first TimeMark is created on the logic volume. | 1.3.6.1.4.1.2011.10.10.2.1.5.1.2 | DateAndTime | read-write | current |
| h3cTimeMarkInterval OBJECT-TYPE This object identifies the interval when the TimeMark is created automatically if the value of this object is not equal to zero. The units is second. the min value is 10 seconds. | 1.3.6.1.4.1.2011.10.10.2.1.5.1.3 | Integer32 | read-write | current |
| h3cTimeMarkLastTime OBJECT-TYPE This object identifies the date and time when the latest TimeMark is created on the logic volume. | 1.3.6.1.4.1.2011.10.10.2.1.5.1.4 | DateAndTime | read-write | current |
| h3cTimeMarkTotal OBJECT-TYPE This object identifies the current num of TimeMark. | 1.3.6.1.4.1.2011.10.10.2.1.5.1.5 | Integer32 | read-only | current |
| h3cTimeMarkSwitch OBJECT-TYPE This object describes enable or disable TimeMark. | 1.3.6.1.4.1.2011.10.10.2.1.5.1.6 | H3cStorageEnableState | read-create | current |
| h3cTimeMarkCreateTable OBJECT-TYPE This table contains some entity to create a TimeMark on a special logic volume. | 1.3.6.1.4.1.2011.10.10.2.1.6 | not-accessible | current | |
| h3cTimeMarkCreateEntry OBJECT-TYPE An entry containing create information applicable to the TimeMark. | 1.3.6.1.4.1.2011.10.10.2.1.6.1 | not-accessible | current | |
| h3cTimeMarkStamp OBJECT-TYPE This object identifies the date and time the TimeMark is created. | 1.3.6.1.4.1.2011.10.10.2.1.6.1.1 | DateAndTime | not-accessible | current |
| h3cTimeMarkComment OBJECT-TYPE This object identifies the comment of the TimeMark. | 1.3.6.1.4.1.2011.10.10.2.1.6.1.2 | OCTET STRING | read-only | current |
| h3cTimeMarkSize OBJECT-TYPE This object identifies the current size of the TimeMark. | 1.3.6.1.4.1.2011.10.10.2.1.6.1.3 | Integer32 | read-only | current |
| h3cTimeMarkRowStatus OBJECT-TYPE This object identifies the action to create or delete the TimeMark. Note that the TimeMark can not be deleted if it is using. | 1.3.6.1.4.1.2011.10.10.2.1.6.1.4 | RowStatus | read-create | current |
| h3cTimeMarkCopyTable OBJECT-TYPE This table contains some entity about a TimeMark copy. | 1.3.6.1.4.1.2011.10.10.2.1.7 | not-accessible | current | |
| h3cTimeMarkCopyEntry OBJECT-TYPE An entry containing config information applicable to the TimeMark copy. | 1.3.6.1.4.1.2011.10.10.2.1.7.1 | not-accessible | current | |
| h3cTMCopyDestLvId OBJECT-TYPE This object identifies the index of destination logic volume for TimeMark copy. | 1.3.6.1.4.1.2011.10.10.2.1.7.1.1 | H3cLvIDType | read-only | current |
| h3cTMCopyPercentage OBJECT-TYPE This object identifies the percentage of TimeMark copy. The value is equal to zero if the TimeMark copy has not started. When finished, the value is always equal to '100'. | 1.3.6.1.4.1.2011.10.10.2.1.7.1.2 | Integer32 (0..100) | read-only | current |
| h3cTMCopyStartTime OBJECT-TYPE This object identifies the time to start the TimeMark copy. | 1.3.6.1.4.1.2011.10.10.2.1.7.1.3 | DateAndTime | read-only | current |
| h3cTMCopySwitch OBJECT-TYPE This object describes the actions to start or stop the TimeMark copy. When read, the value of 'none' will be get. | 1.3.6.1.4.1.2011.10.10.2.1.7.1.4 | INTEGER {start(1), stop(2), none(3)} | read-write | current |
| h3cTimeMarkRollbackTable OBJECT-TYPE This table contains some entity to use a TimeMark to rollback the logic volume. | 1.3.6.1.4.1.2011.10.10.2.1.8 | not-accessible | current | |
| h3cTimeMarkRollbackEntry OBJECT-TYPE An entry containing config information applicable to use a TimeMark to rollback the logic volume. | 1.3.6.1.4.1.2011.10.10.2.1.8.1 | not-accessible | current | |
| h3cTMRollbackPercentage OBJECT-TYPE This object identifies the percentage of rollback. | 1.3.6.1.4.1.2011.10.10.2.1.8.1.1 | Integer32 (0..100) | read-only | current |
| h3cTMRollbackStartTime OBJECT-TYPE This object identifies the time to start the rollback. | 1.3.6.1.4.1.2011.10.10.2.1.8.1.2 | DateAndTime | read-only | current |
| h3cTMRollbackSwitch OBJECT-TYPE This object describes the actions to use a TimeMark to rollback the logic volume. Note that once you roll back, you cannot roll forward, all the later TimeMark behind it will be deleted. | 1.3.6.1.4.1.2011.10.10.2.1.8.1.3 | H3cStorageActionType | read-write | current |
| h3cTimeViewTable OBJECT-TYPE This table contains some entity to config a TimeView on a special TimeMark. | 1.3.6.1.4.1.2011.10.10.2.1.9 | not-accessible | current | |
| h3cTimeViewEntry OBJECT-TYPE An entry containing config information applicable to the TimeView. | 1.3.6.1.4.1.2011.10.10.2.1.9.1 | not-accessible | current | |
| h3cTimeViewStamp OBJECT-TYPE This object identifies the TimeView. The object identified by this index is the same object as identified by the same value of h3cTimeMarkStamp. | 1.3.6.1.4.1.2011.10.10.2.1.9.1.1 | DateAndTime | not-accessible | current |
| h3cTimeViewID OBJECT-TYPE This object identifies the TimeView. | 1.3.6.1.4.1.2011.10.10.2.1.9.1.2 | H3cLvIDType | read-only | current |
| h3cTimeViewName OBJECT-TYPE This object identifies the name of the TimeView. | 1.3.6.1.4.1.2011.10.10.2.1.9.1.3 | OCTET STRING | read-create | current |
| h3cTimeViewRowStatus OBJECT-TYPE This object describes the actions to create or delete the TimeView. | 1.3.6.1.4.1.2011.10.10.2.1.9.1.4 | RowStatus | read-create | current |
| h3cReplicaConfigTable OBJECT-TYPE This table contains some entity to config replication for a logic volume. | 1.3.6.1.4.1.2011.10.10.2.1.10 | not-accessible | current | |
| h3cReplicaConfigEntry OBJECT-TYPE An entry containing config information applicable to the replication for a logic volume. | 1.3.6.1.4.1.2011.10.10.2.1.10.1 | not-accessible | current | |
| h3cRepLocalLvIndex OBJECT-TYPE This object identifies the local logic volume that is related with replication. The object identified by this index is the same object as identified by the same value of h3cSnapLvIndex. | 1.3.6.1.4.1.2011.10.10.2.1.10.1.1 | H3cLvIDType | not-accessible | current |
| h3cLvRepLocalWay OBJECT-TYPE The value of 'outgoing' means the h3cRepLocalLvIndex is the primary logic volume of replication, and the h3cRepRemoteLvIndex is the replica logic volume. The value of 'incoming' means the h3cRepLocalLvIndex is the replica logic volume of replication. , and the h3cRepRemoteLvIndex is the primary logic volume. | 1.3.6.1.4.1.2011.10.10.2.1.10.1.2 | INTEGER {outgoing(1), incoming(2)} | read-only | current |
| h3cRepLocalServerIP OBJECT-TYPE This object identifies the ip address of local server. | 1.3.6.1.4.1.2011.10.10.2.1.10.1.3 | InetAddress | read-create | current |
| h3cRepLocalServerIPType OBJECT-TYPE This object identifies the ip address type of local server. | 1.3.6.1.4.1.2011.10.10.2.1.10.1.4 | InetAddressType | read-create | current |
| h3cRepLocalServerName OBJECT-TYPE This object identifies the name of local server. | 1.3.6.1.4.1.2011.10.10.2.1.10.1.5 | OCTET STRING | read-only | current |
| h3cRepLocalServerUsername OBJECT-TYPE This object identifies the username of local server. | 1.3.6.1.4.1.2011.10.10.2.1.10.1.6 | OCTET STRING (SIZE(1..32)) | read-create | current |
| h3cRepLocalServerPassword OBJECT-TYPE This object identifies the password of local server. | 1.3.6.1.4.1.2011.10.10.2.1.10.1.7 | OCTET STRING (SIZE(1..127)) | read-create | current |
| h3cRepRemoteServerIP OBJECT-TYPE This object identifies the ip address of remote server. | 1.3.6.1.4.1.2011.10.10.2.1.10.1.8 | InetAddress | read-create | current |
| h3cRepRemoteServerIPType OBJECT-TYPE This object identifies the ip address type of remote server. | 1.3.6.1.4.1.2011.10.10.2.1.10.1.9 | InetAddressType | read-create | current |
| h3cRepRemoteServerName OBJECT-TYPE This object identifies the name of remote server. | 1.3.6.1.4.1.2011.10.10.2.1.10.1.10 | OCTET STRING | read-only | current |
| h3cRepRemoteServerUsername OBJECT-TYPE This object identifies the username of remote server. | 1.3.6.1.4.1.2011.10.10.2.1.10.1.11 | OCTET STRING (SIZE(1..32)) | read-create | current |
| h3cRepRemoteServerPassword OBJECT-TYPE This object identifies the password of remote server. | 1.3.6.1.4.1.2011.10.10.2.1.10.1.12 | OCTET STRING (SIZE(1..127)) | read-create | current |
| h3cRepRemoteLvIndex OBJECT-TYPE This object identifies the logic volume of remote server. | 1.3.6.1.4.1.2011.10.10.2.1.10.1.13 | H3cLvIDType | read-create | current |
| h3cReplicaMode OBJECT-TYPE This object identifies the replication mode: The value of 'adaptive' means that data from the primary resource is continuously replicated to a replica resource unless the system determines it is not practical or possible. The value of 'remote' means that a snapshot is taken of the primary resource at prescribed intervals based on the criteria you set (schedule and/or watermark value). Note that the associated Continuous Replication Resource can not be created if the value of this boject is not equal to 'adaptive'. | 1.3.6.1.4.1.2011.10.10.2.1.10.1.14 | INTEGER {adaptive(1), remote(2), none(3)} | read-create | current |
| h3cReplicaWatermark OBJECT-TYPE This object identifies the size of watermark which means a replication is scheduled. | 1.3.6.1.4.1.2011.10.10.2.1.10.1.15 | Integer32 | read-create | current |
| h3cReplicaWatermarkRetry OBJECT-TYPE If the 'h3cReplicaWatermark' is set, This object identifies the interval time to retry if the last replication is failed. The units is minute. | 1.3.6.1.4.1.2011.10.10.2.1.10.1.16 | Integer32 | read-create | current |
| h3cReplicaInitializeTime OBJECT-TYPE This object identifies the time to start an initial replication. | 1.3.6.1.4.1.2011.10.10.2.1.10.1.17 | DateAndTime | read-create | current |
| h3cReplicaInterval OBJECT-TYPE This object identifies how often the replication should be repeated after initial replication. The units is minute. | 1.3.6.1.4.1.2011.10.10.2.1.10.1.18 | Integer32 | read-create | current |
| h3cReplicaEncrypt OBJECT-TYPE This object identifies the encrypt option is enable or diable. | 1.3.6.1.4.1.2011.10.10.2.1.10.1.19 | H3cStorageEnableState | read-create | current |
| h3cReplicaCompress OBJECT-TYPE This object identifies the compress option is enable or diable. | 1.3.6.1.4.1.2011.10.10.2.1.10.1.20 | H3cStorageEnableState | read-create | current |
| h3cReplicaUseExistTM OBJECT-TYPE This object identifies if using the exist TimeMark to replicate or not. | 1.3.6.1.4.1.2011.10.10.2.1.10.1.21 | H3cStorageEnableState | read-create | current |
| h3cReplicaProtocol OBJECT-TYPE This object identifies the protocol about replication. The value 'tcp' means Transmission Control Protocol, and 'rudp' means Reliable User Datagram Protocol. | 1.3.6.1.4.1.2011.10.10.2.1.10.1.22 | INTEGER {tcp(1), rudp(2)} | read-create | current |
| h3cReplicaScanDiff OBJECT-TYPE This object identifies the system to scan both the primary and replica resource to determine how much data needs to be synchronized. | 1.3.6.1.4.1.2011.10.10.2.1.10.1.23 | TruthValue | read-create | current |
| h3cReplicaStatSwitch OBJECT-TYPE This object identifies the action how to operate the replica. When read , a value of 'none' will be get. The value of 'promte' means remove the replication relation and promote the remote copy on the target server. The value of 'sync' means synchronize mannually (force a replication that is not scheduled.) The value of 'scan' means scan the delta data between primary resource and replica resource. The value of 'reversal' means switch the roles of the primary resource and replica resource. The replication configuration is maintained. The primary and replica must be synchronized in order to reverse a replica. The value of 'stop' means stop a replication that is currently in progress. The value of 'suspend' means suspend future replications from automatically being triggered by replication policies (watermark, interval, time). This will not stop a replication that is currently in progress. The value of 'resume' means resume the replication status from suspended to normal. Note that if the action of 'upgrade' is executed successfully, this replica resource will become a normal logic volume, and this entry will be deleted automatically. Note that if the action of 'reversal' is executed successfully, Clients will be disconnected from the former primary resource. | 1.3.6.1.4.1.2011.10.10.2.1.10.1.24 | INTEGER {promte(1), sync(2), scan(3), reversal(4), stop(5), suspend(6), resume(7), none(8)} | read-create | current |
| h3cReplicaRowStatus OBJECT-TYPE This object identifies the action to enable or disable the replication. | 1.3.6.1.4.1.2011.10.10.2.1.10.1.25 | RowStatus | read-create | current |
| h3cReplicaStateTable OBJECT-TYPE This table contains some entity to show replication state. | 1.3.6.1.4.1.2011.10.10.2.1.11 | not-accessible | current | |
| h3cReplicaStateEntry OBJECT-TYPE An entry containing show information applicable to the replication state. | 1.3.6.1.4.1.2011.10.10.2.1.11.1 | not-accessible | current | |
| h3cReplicaDelta OBJECT-TYPE This object identifies the size of delta data after last sync. | 1.3.6.1.4.1.2011.10.10.2.1.11.1.1 | Integer32 | read-only | current |
| h3cReplicaLastSyncTime OBJECT-TYPE This object identifies the date and time when last sync is taken. | 1.3.6.1.4.1.2011.10.10.2.1.11.1.2 | DateAndTime | read-only | current |
| h3cReplicaNextSyncTime OBJECT-TYPE This object identifies the date and time when next sync will be taken. | 1.3.6.1.4.1.2011.10.10.2.1.11.1.3 | DateAndTime | read-only | current |
| h3cReplicaSyncTotalSize OBJECT-TYPE This object identifies how much data need to be synchronized to the replica resource for current replication. | 1.3.6.1.4.1.2011.10.10.2.1.11.1.4 | Integer32 | read-only | current |
| h3cReplicaSyncCurPercentage OBJECT-TYPE This object identifies how much data has been synchronized to the replica resource for current replication. | 1.3.6.1.4.1.2011.10.10.2.1.11.1.5 | Integer32 | read-only | current |
| h3cReplicaSyncPerformance OBJECT-TYPE This object identifies the performance of the synchronize. The unit is MB/s. | 1.3.6.1.4.1.2011.10.10.2.1.11.1.6 | Integer32 | read-only | current |
| h3cReplicaRunStatus OBJECT-TYPE This object identifies the state of the replica. | 1.3.6.1.4.1.2011.10.10.2.1.11.1.7 | INTEGER {suspend(1), idle(2), stop(3), sync(4), scan(5)} | read-only | current |
| h3cCDRConfigTable OBJECT-TYPE This table contains some entity to config Continuous Replication Resource. | 1.3.6.1.4.1.2011.10.10.2.1.12 | not-accessible | current | |
| h3cCDRConfigEntry OBJECT-TYPE An entry containing some information applicable to Continuous Replication Resource of the logic volume. | 1.3.6.1.4.1.2011.10.10.2.1.12.1 | not-accessible | current | |
| h3cCDRLvIndex OBJECT-TYPE This object identifies the source logic volume of the Continuous Replication Resource. The object identified by this index is the same object as identified by the same value of h3cRepLocalLvIndex. Note that an entry of h3cCDRConfigTable can be created only when the associated h3cCDRDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated h3cCDRDistributeTable objects should be deleted automatically. | 1.3.6.1.4.1.2011.10.10.2.1.12.1.1 | H3cLvIDType | not-accessible | current |
| h3cCDRID OBJECT-TYPE This object identifies the Continuous Replication Resource. | 1.3.6.1.4.1.2011.10.10.2.1.12.1.2 | Integer32 | read-only | current |
| h3cCDRStatus OBJECT-TYPE This object identifies the state of the Continuous Replication Resource. | 1.3.6.1.4.1.2011.10.10.2.1.12.1.3 | H3cStorageOnlineState | read-only | current |
| h3cCDRTotalSize OBJECT-TYPE This object identifies the total size of the Continuous Replication Resource. | 1.3.6.1.4.1.2011.10.10.2.1.12.1.4 | Integer32 | read-only | current |
| h3cCDRFreeSize OBJECT-TYPE This object identifies the free size of the Continuous Replication Resource. | 1.3.6.1.4.1.2011.10.10.2.1.12.1.5 | Integer32 | read-only | current |
| h3cCDRSelectPolicy OBJECT-TYPE This object describes the policy about allocating the space for Continuous Replication Resource. | 1.3.6.1.4.1.2011.10.10.2.1.12.1.6 | H3cExtendSelectPolicy | read-create | current |
| h3cCDRRowStatus OBJECT-TYPE This object identifies the action to create or delete the Continuous Replication Resource. | 1.3.6.1.4.1.2011.10.10.2.1.12.1.7 | RowStatus | read-create | current |
| h3cCDRDistributeTable OBJECT-TYPE This table contains some entity to config the distribution of Continuous Replication Resource. | 1.3.6.1.4.1.2011.10.10.2.1.13 | not-accessible | current | |
| h3cCDRDistributeEntry OBJECT-TYPE An entry containing some information applicable to the distribution of Continuous Replication Resource. | 1.3.6.1.4.1.2011.10.10.2.1.13.1 | not-accessible | current | |
| h3cCDRDistLvIndex OBJECT-TYPE This index is identical to h3cLvIndex in H3C-LOGIC-VOLUME-MIB. | 1.3.6.1.4.1.2011.10.10.2.1.13.1.1 | H3cLvIDType | not-accessible | current |
| h3cCDRRaidUuid OBJECT-TYPE This index is identical to h3cRaidUuid in H3C-RAID-MIB. | 1.3.6.1.4.1.2011.10.10.2.1.13.1.2 | H3cRaidIDType | not-accessible | current |
| h3cCDRRaidSize OBJECT-TYPE This object identifies the size on the special raid distributed for the Continuous Replication Resource. | 1.3.6.1.4.1.2011.10.10.2.1.13.1.3 | Integer32 | read-create | current |
| h3cCDRExtRowStatus OBJECT-TYPE This object identifies the action to create the distribution for the Continuous Replication Resource. | 1.3.6.1.4.1.2011.10.10.2.1.13.1.4 | RowStatus | read-create | current |
| h3cSafeCacheConfigTable OBJECT-TYPE This table contains some entity to config SafeCache. | 1.3.6.1.4.1.2011.10.10.2.1.14 | not-accessible | current | |
| h3cSafeCacheConfigEntry OBJECT-TYPE An entry containing some information applicable to SafeCache of the logic volume. | 1.3.6.1.4.1.2011.10.10.2.1.14.1 | not-accessible | current | |
| h3cSafeCacheLvIndex OBJECT-TYPE This object identifies the source logic volume of the SafeCache. The object identified by this index is the same object as identified by the same value of h3cLvindex. Note that an entry of h3cSafeCacheConfigTable can be created only when the associated h3cSafeCacheDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated h3cSafeCacheDistributeTable objects should be deleted automatically. | 1.3.6.1.4.1.2011.10.10.2.1.14.1.1 | H3cLvIDType | not-accessible | current |
| h3cSafeCacheID OBJECT-TYPE This object identifies a SafeCache. | 1.3.6.1.4.1.2011.10.10.2.1.14.1.2 | Integer32 | read-only | current |
| h3cSafeCacheStatus OBJECT-TYPE This object identifies the state of the SafeCache. | 1.3.6.1.4.1.2011.10.10.2.1.14.1.3 | H3cStorageOnlineState | read-only | current |
| h3cSafeCacheTotalSize OBJECT-TYPE This object identifies the total size of the SafeCache. The units is million bytes. | 1.3.6.1.4.1.2011.10.10.2.1.14.1.4 | Integer32 | read-only | current |
| h3cSafeCacheFreeSize OBJECT-TYPE This object identifies the free size of the SafeCache. The units is million bytes. | 1.3.6.1.4.1.2011.10.10.2.1.14.1.5 | Integer32 | read-only | current |
| h3cSafeCacheSelectPolicy OBJECT-TYPE This object describes the policy about allocating the space for SafeCache. | 1.3.6.1.4.1.2011.10.10.2.1.14.1.6 | H3cExtendSelectPolicy | read-create | current |
| h3cSafeCacheThreshold OBJECT-TYPE This object identifies the maximal percentage of date changed before data flushing. | 1.3.6.1.4.1.2011.10.10.2.1.14.1.7 | Integer32 (0..100) | read-create | current |
| h3cSafeCacheFlushTime OBJECT-TYPE This object identifies the period during which the date can stay in cache before data flushing. The units is second. | 1.3.6.1.4.1.2011.10.10.2.1.14.1.8 | Integer32 | read-create | current |
| h3cSafeCacheFlushCommand OBJECT-TYPE This object identifies the number of commands when data flushing. | 1.3.6.1.4.1.2011.10.10.2.1.14.1.9 | Integer32 (1..64) | read-create | current |
| h3cSafeCacheSkipDupWrite OBJECT-TYPE This object identifies skip duplicate write commands or not. | 1.3.6.1.4.1.2011.10.10.2.1.14.1.10 | INTEGER {enable(1), disable(2)} | read-create | current |
| h3cSafeCacheRunStatus OBJECT-TYPE This object identifies the run state of the SafeCache. | 1.3.6.1.4.1.2011.10.10.2.1.14.1.11 | INTEGER {run(1), suspend(2)} | read-only | current |
| h3cSafeCacheSwitch OBJECT-TYPE This object identifies the action of the SafeCache. The value 'suspend' means suspend the SafeCache. The value 'resume' means resume the SafeCache. | 1.3.6.1.4.1.2011.10.10.2.1.14.1.12 | INTEGER {suspend(1), resume(2), none(3)} | read-create | current |
| h3cSafeCacheRowStatus OBJECT-TYPE This object identifies the action to create or delete the SafeCache. | 1.3.6.1.4.1.2011.10.10.2.1.14.1.13 | RowStatus | read-create | current |
| h3cSafeCacheDistributeTable OBJECT-TYPE This table contains some entity to config the SafeCache resource. | 1.3.6.1.4.1.2011.10.10.2.1.15 | not-accessible | current | |
| h3cSafeCacheDistributeEntry OBJECT-TYPE An entry containing some information applicable to SafeCache resource of the logic volume. | 1.3.6.1.4.1.2011.10.10.2.1.15.1 | not-accessible | current | |
| h3cSafeCacheDistLvIndex OBJECT-TYPE This index is identical to h3cLvIndex in H3C-LOGIC-VOLUME-MIB. | 1.3.6.1.4.1.2011.10.10.2.1.15.1.1 | H3cLvIDType | not-accessible | current |
| h3cSafeCacheRaidUuid OBJECT-TYPE This index is identical to h3cRaidUuid in H3C-RAID-MIB. | 1.3.6.1.4.1.2011.10.10.2.1.15.1.2 | H3cRaidIDType | not-accessible | current |
| h3cSafeCacheRaidSize OBJECT-TYPE This object identifies the size on the special raid distributed for the SafeCache resource. | 1.3.6.1.4.1.2011.10.10.2.1.15.1.3 | Integer32 | read-create | current |
| h3cSafeCacheExtRowStatus OBJECT-TYPE This object identifies the action to create the distribution for the SafeCache resource. | 1.3.6.1.4.1.2011.10.10.2.1.15.1.4 | RowStatus | read-create | current |
| h3cMirrorConfigTable OBJECT-TYPE This table contains some entity to config mirror. | 1.3.6.1.4.1.2011.10.10.2.1.16 | not-accessible | current | |
| h3cMirrorConfigEntry OBJECT-TYPE An entry containing some information applicable to mirror for the logic volume. | 1.3.6.1.4.1.2011.10.10.2.1.16.1 | not-accessible | current | |
| h3cMirrorLvIndex OBJECT-TYPE This object identifies the source logic volume of the mirror. The object identified by this index is the same object as identified by the same value of h3cLvindex. Note that an entry of h3cMirrorConfigTable can be created only when the associated h3cMirrorDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated h3cMirrorDistributeTable objects should be deleted automatically. | 1.3.6.1.4.1.2011.10.10.2.1.16.1.1 | H3cLvIDType | not-accessible | current |
| h3cMirrorType OBJECT-TYPE This object identifies the type of the mirror. | 1.3.6.1.4.1.2011.10.10.2.1.16.1.2 | INTEGER {sync(1), async(2), none(3)} | read-only | current |
| h3cMirrorStatus OBJECT-TYPE This object identifies the state of the mirror resource. | 1.3.6.1.4.1.2011.10.10.2.1.16.1.3 | H3cStorageOnlineState | read-only | current |
| h3cMirrorName OBJECT-TYPE This object identifies the name of the mirror resource. it is used when promote mirror resource. | 1.3.6.1.4.1.2011.10.10.2.1.16.1.4 | OCTET STRING | read-create | current |
| h3cMirrorSyncPercentage OBJECT-TYPE This object identifies the percentage of the mirror sync. | 1.3.6.1.4.1.2011.10.10.2.1.16.1.5 | Integer32 (0..100) | read-only | current |
| h3cMirrorSyncPerformance OBJECT-TYPE This object identifies the performance of the mirror sync. The unit is MB/S | 1.3.6.1.4.1.2011.10.10.2.1.16.1.6 | Integer32 (0..100) | read-only | current |
| h3cMirrorDelta OBJECT-TYPE This object identifies size of delta data after the last mirror sync. | 1.3.6.1.4.1.2011.10.10.2.1.16.1.7 | Integer32 | read-only | current |
| h3cMirrorRaidType OBJECT-TYPE This object identifies the raid type of the mirror resource. | 1.3.6.1.4.1.2011.10.10.2.1.16.1.8 | INTEGER {virtual(1), serviceEnable(2), none(3)} | read-create | current |
| h3cMirrorSelectPolicy OBJECT-TYPE This object describes the policy about allocating the space for mirror resource. | 1.3.6.1.4.1.2011.10.10.2.1.16.1.9 | H3cExtendSelectPolicy | read-create | current |
| h3cMirrorSwitch OBJECT-TYPE This object identifies the state of the mirror. The value of 'sync' means synchronize mannually. The value of 'swap' means switch the roles of the primary resource and mirror resource. The value of 'promte' means break the mirrored pair and convert the mirror resource into an independent logic volume. The new logic volume will have all of the properties of a regular logic volume. Note that if the action of 'promte' is executed successfully, this mirror resource will become a primary logic volume, and this entry will be deleted automatically. | 1.3.6.1.4.1.2011.10.10.2.1.16.1.10 | INTEGER {sync(1), swap(2), promote(3), none(4)} | read-create | current |
| h3cMirrorExtendRaidUuid OBJECT-TYPE This object identifies the raid of the mirror resource when the primary logic volume resource is extended. | 1.3.6.1.4.1.2011.10.10.2.1.16.1.11 | H3cRaidIDType | read-create | current |
| h3cMirrorRowStatus OBJECT-TYPE This object identifies the action to create or delete the mirror resource. | 1.3.6.1.4.1.2011.10.10.2.1.16.1.12 | RowStatus | read-create | current |
| h3cMirrorDistributeTable OBJECT-TYPE This table contains some entity to config the mirror resource. | 1.3.6.1.4.1.2011.10.10.2.1.17 | not-accessible | current | |
| h3cMirrorDistributeEntry OBJECT-TYPE An entry containing some information applicable to mirror resource for the logic volume. | 1.3.6.1.4.1.2011.10.10.2.1.17.1 | not-accessible | current | |
| h3cMirrorDistLvIndex OBJECT-TYPE This index is identical to h3cLvIndex in H3C-LOGIC-VOLUME-MIB. | 1.3.6.1.4.1.2011.10.10.2.1.17.1.1 | H3cLvIDType | not-accessible | current |
| h3cMirrorRaidUuid OBJECT-TYPE This index is identical to h3cRaidUuid in H3C-RAID-MIB. | 1.3.6.1.4.1.2011.10.10.2.1.17.1.2 | H3cRaidIDType | not-accessible | current |
| h3cMirrorRaidSize OBJECT-TYPE This object identifies the size on the special raid distributed for the mirror resource. | 1.3.6.1.4.1.2011.10.10.2.1.17.1.3 | Integer32 | read-create | current |
| h3cMirrorExtRowStatus OBJECT-TYPE This object identifies the action to create or delete the distribution for the mirror resource. | 1.3.6.1.4.1.2011.10.10.2.1.17.1.4 | RowStatus | read-create | current |