MIBs Depot

FOUNDRY-SN-VSRP-MIB

Registered at
1.3.6.1.4.1.1991.1.1.3.21
Last updated
2010-06-02 00:00
Organization
Brocade Communications Systems, Inc.
Revisions
2010-06-02 00:00, 2009-09-30 00:00
Namespace
extreme
Source file
FOUNDRY-SN-VSRP-MIB
Digest
sha256:839d736e383727500ef61780f117a3f1d44d9937144c9a6941e54978c79038fc

Description

Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment.

Contact

Technical Support Center 130 Holger Way, San Jose, CA 95134 Email: ipsupport@brocade.com Phone: 1-800-752-8061 URL: www.brocade.com

Imports

FromSymbols
FOUNDRY-SN-SWITCH-GROUP-MIBsnSwitch
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

FOUNDRY-SN-AGENT-MIB
FOUNDRY-SN-ROOT-MIB
FOUNDRY-SN-SWITCH-GROUP-MIB
FOUNDRY-SN-VSRP-MIB
HCNUM-TC
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
MacAddress
TEXTUAL-CONVENTION
This data type is used to model media addresses. For many types of media, this will be in a binary representation. For example, an ethernet address would be represented as a string of 6 octets.
current

Objects

NameOIDSyntaxAccessStatus
snVsrpGlobal
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.1.3.21.1
snVsrpGroupOperModeVsrp
OBJECT-TYPE
The VSRP is configured on this system either enabled or disabled and thedefault is disabled mode. disabled(0)..........disable VSRP enabled(1)...........activate VSRP
1.3.6.1.4.1.1991.1.1.3.21.1.1INTEGER {disabled(0), enabled(1)}read-writecurrent
snVsrpIfStateChangeTrap
OBJECT-TYPE
Indicates whether the SNMP agent process is permitted to generate VSRP interface state change traps.
1.3.6.1.4.1.1991.1.1.3.21.1.2INTEGER {disabled(0), enabled(1)}read-writecurrent
snVsrpIfMaxNumVridPerIntf
OBJECT-TYPE
Indicates the maximum number of VRID per interface.
1.3.6.1.4.1.1991.1.1.3.21.1.3Integer32read-onlycurrent
snVsrpIfMaxNumVridPerSystem
OBJECT-TYPE
Indicates the maximum number of VRID per system.
1.3.6.1.4.1.1991.1.1.3.21.1.4Integer32read-onlycurrent
snVsrpClearVrrpStat
OBJECT-TYPE
Clear VSRP statistics command.
1.3.6.1.4.1.1991.1.1.3.21.1.5INTEGER {normal(0), clear(1)}read-writecurrent
snVsrpIfIntf
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.1.3.21.2
snVsrpIfTable
OBJECT-TYPE
The VSRP Interface Table describes the interfaces from the viewpoint of VSRP.
1.3.6.1.4.1.1991.1.1.3.21.2.1not-accessiblecurrent
snVsrpIfEntry
OBJECT-TYPE
The VSRP Interface Entry describes one interface from the viewpoint of VSRP.
1.3.6.1.4.1.1991.1.1.3.21.2.1.1not-accessiblecurrent
snVsrpIfVlanId
OBJECT-TYPE
Vlan index.
1.3.6.1.4.1.1991.1.1.3.21.2.1.1.1Integer32read-onlycurrent
snVsrpIfAuthType
OBJECT-TYPE
The authentication type of this interface.
1.3.6.1.4.1.1991.1.1.3.21.2.1.1.2INTEGER {noAuth(0), simpleTextPasswd(1), ipAuthHeader(2)}read-writecurrent
snVsrpIfAuthPassword
OBJECT-TYPE
The simple text password is allowed if only if the snVsrpIfAuthType type is simpleTextPasswd and the size should be greater than zero. On reading this object, if the snVsrpIfAuthType type is noAuth, then zero length string will be returned
1.3.6.1.4.1.1991.1.1.3.21.2.1.1.3OCTET STRING (SIZE(0..8))read-writecurrent
snVsrpVirRtr
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.1.3.21.3
snVsrpVirRtrTable
OBJECT-TYPE
The vsrp virtual router Entry describes one virtual router from the viewpoint of vsrp.
1.3.6.1.4.1.1991.1.1.3.21.3.1not-accessiblecurrent
snVsrpVirRtrEntry
OBJECT-TYPE
The vsrp virtual router Entry describes one virtual router from the viewpoint of vsrp.
1.3.6.1.4.1.1991.1.1.3.21.3.1.1not-accessiblecurrent
snVsrpVirRtrVlanId
OBJECT-TYPE
Vlan index.
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.1Integer32read-onlycurrent
snVsrpVirRtrId
OBJECT-TYPE
One of the virtual router ID of this vsrp interface.
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.2INTEGER (1..255)read-onlycurrent
snVsrpVirRtrOwnership
OBJECT-TYPE
The ownership of this vsrp router interface can be set to backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this vsrp router interface.
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.3INTEGER {incomplete(0), owner(1), backup(2)}read-writecurrent
snVsrpVirRtrCfgPriority
OBJECT-TYPE
The higher the number the higher the priority is. This parameter decides which backup router should becomes the Active Router for the interface. A backup Router with higher priority selected to becomes the Active Router. Therefore, this Object can be set if only if snVsrpVirRtrOwnership is set to backup(2). For NetIron platforms, the range is between 8 to 255.
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.4INTEGER (1..255)read-writecurrent
snVsrpVirRtrTrackPriority
OBJECT-TYPE
The higher the number the higher the priority is. after this object is configured, the snVsrpVirRtrCurrPriority of this interface will be adjusted dynamically with this track priority when the Track Port states first changes from UP to DOWN.
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.5INTEGER (1..254)read-writecurrent
snVsrpVirRtrCurrPriority
OBJECT-TYPE
The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes from UP to DOWN.
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.6INTEGER (1..254)read-onlycurrent
snVsrpVirRtrHelloInt
OBJECT-TYPE
Time interval between advertisements (seconds).
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.7INTEGER (1..84)read-writecurrent
snVsrpVirRtrDeadInt
OBJECT-TYPE
Dead interval (seconds).
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.8INTEGER (0..84)read-writecurrent
snVsrpVirRtrPreemptMode
OBJECT-TYPE
This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit preemption.
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.9INTEGER {disabled(0), enabled(1)}read-writecurrent
snVsrpVirRtrState
OBJECT-TYPE
This object specifies the vsrp Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state.
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.10INTEGER {init(0), master(1), backup(2)}read-onlycurrent
snVsrpVirRtrIpAddrMask
OBJECT-TYPE
The numbers of IP Addresses of this virtual router of this interface, this holds good for L3 vsrp.
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.11OCTET STRING (SIZE(64))read-writecurrent
snVsrpVirRtrActivate
OBJECT-TYPE
This object specifies the vsrp Router's activate command as: disabled(0)...deactivate this vsrp Router. enabled(1)....activate this vsrp Router.
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.12INTEGER {disabled(0), enabled(1)}read-writecurrent
snVsrpVirRtrTrackPortList
OBJECT-TYPE
This object specifies the identity of the physical port and virtual ports whose state is to be monitored. Each port index is an ifIndex, if there are consecutive 4 or more ifIndex then they will be encoded like below. Encoding and decoding scheme is range based: Each range prefix with 0000 (2 octets) where 0000 is not valid ifIndex. Next 2 octets indicates lower range ifIndex, followed by 2 octets of higher range ifIndex. Individual(non range) ones will be displayed as it is. Ex: port list: 0001..0005 0015 0032..0047 Port list in PDU: 0000 0001 0005 000f 0000 0020 002f. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VSRP physical track port membership.
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.13OCTET STRINGread-writecurrent
snVsrpVirRtrAdvertiseBackup
OBJECT-TYPE
Set Advertise this backup router to master
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.14INTEGER {disabled(0), enabled(1)}read-writecurrent
snVsrpVirRtrHoldDownInt
OBJECT-TYPE
VSRP protection mechanism, an extra delay for a switch in backup mode to upgrade itself to master mode
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.15INTEGER (1..84)read-writecurrent
snVsrpVirRtrInitTtl
OBJECT-TYPE
VSRP:TTL in the hello packet to regulate the distance that a hello packet can travel. It prevents the flooding of VSRP hello packets in the network
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.16INTEGER (1..255)read-writecurrent
snVsrpVirRtrIncPortList
OBJECT-TYPE
Include all free ports of the VLAN into its control ports
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.17OCTET STRINGread-writecurrent
snVsrpVirRtrSave
OBJECT-TYPE
Set VSRP to save current parameters value
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.18INTEGER {disabled(0), enabled(1)}read-writecurrent
snVsrpVirRtrBackupInt
OBJECT-TYPE
Time interval between backup routers hello message advertisements (seconds).
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.19INTEGER (60..3600)read-writecurrent
snVsrpVirRtrRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an existing row VirRtr the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.20INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)}read-writecurrent
snVsrpVirRtrRxArpPktDropCnts
OBJECT-TYPE
The received vsrp ARP Packet Drop Counts.
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.21Counter32read-onlycurrent
snVsrpVirRtrRxIpPktDropCnts
OBJECT-TYPE
The received VSRP IP Packet Drop Counts.
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.22Counter32read-onlycurrent
snVsrpVirRtrRxPortMismatchCnts
OBJECT-TYPE
The received vsrp Port mismatching Counts.
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.23Counter32read-onlycurrent
snVsrpVirRtrRxNumOfIpMismatchCnts
OBJECT-TYPE
The received VSRP Number of IP Addresses mismatching Counts.
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.24Counter32read-onlycurrent
snVsrpVirRtrRxIpMismatchCnts
OBJECT-TYPE
The received vsrp IP Address mismatching Counts.
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.25Counter32read-onlycurrent
snVsrpVirRtrRxHelloIntMismatchCnts
OBJECT-TYPE
The counts of the virtual router interface with hello interval mismatch counts.
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.26Counter32read-onlycurrent
snVsrpVirRtrRxPriorityZeroFromMasterCnts
OBJECT-TYPE
The counts of the virtual router interface with Priority zero from the master.
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.27Counter32read-onlycurrent
snVsrpVirRtrRxHigherPriorityCnts
OBJECT-TYPE
The counts of the virtual router interface with higher Priority.
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.28Counter32read-onlycurrent
snVsrpVirRtrTransToMasterStateCnts
OBJECT-TYPE
The counts of the virtual router interface transition to master state.
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.29Counter32read-onlycurrent
snVsrpVirRtrTransToBackupStateCnts
OBJECT-TYPE
The counts of the virtual router interface transition to backup state.
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.30Counter32read-onlycurrent
snVsrpVirRtrCurrDeadInt
OBJECT-TYPE
Current Dead interval (in 100 milliseconds).
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.31Integer32read-onlycurrent
snVsrpVirRtrCurHelloInt
OBJECT-TYPE
Set backup router hello interval
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.32INTEGER (1..84)read-onlycurrent
snVsrpVirRtrCurHoldDownInt
OBJECT-TYPE
VSRP protection mechanism, an extra delay for a switch in backup mode to upgrade itself to master mode
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.33INTEGER (1..84)read-onlycurrent
snVsrpVirRtrCurInitTtl
OBJECT-TYPE
VSRP:TTL in the hello packet to regulate the distance that a hello packet can travel. It prevents the flooding of VSRP hello packets in the network
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.34INTEGER (1..255)read-onlycurrent
snVsrpVirRtrHelloMacAddress
OBJECT-TYPE
Hello MAC address.
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.35MacAddressread-onlycurrent
snVsrpVirRtrMasterIpAddr
OBJECT-TYPE
The master router's real/virtual (primary) IP address. This is the IP address listed as the source in vsrp advertisement last received by this virtual router.
1.3.6.1.4.1.1991.1.1.3.21.3.1.1.36IpAddressread-onlycurrent