EQLGROUP-MIB

TEXTUAL-CONVENTION

This field specifies the privilege level of the account. The default is global-admin. global-admin grants full access to the administrator. pool-admin designates the administrator to have access only to one or more pools, and does not have access to global and group-level administrator. volume-admin designates the administrator to have access to specific volumes within specific storage pools.

TEXTUAL-CONVENTION

This field specifies the type of account. The read-write account type allows the user to modify any group settings. The read-only account allows only read-only access to group configuration data. The default is read-write. Changing this value will come into affect only for new login of the user. Currently logged in sessions will not be affected. Read-only account is only applicable for group admin accounts/pool-admin accounts. Group-admins with read-only set cannot modify any settings.

TEXTUAL-CONVENTION

An octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC1905]. Note that the size of an SnmpAdminString object is measured in octets, not characters.

OBJECT-IDENTITY

OBJECT-TYPE

EqualLogic-Persistent Storage Group Table

OBJECT-TYPE

An entry (row) containing storage group information.

OBJECT-TYPE

This index uniquely identifies the group. This index should always be 1.

OBJECT-TYPE

This field is used to indicate whether or not all the arrays within a group are located in the same subset. The default is single-subnet.

OBJECT-TYPE

This field is deprecated.

OBJECT-TYPE

This field is deprecated.

OBJECT-TYPE

This field is used to indicate the routing protocol use when a group spans multiple subnets. The support protocols are RIP and OFPS. The default value is none.

OBJECT-TYPE

This field is used to indicate whether the Storage Pool is optimized for capacity (RAID 5/50) or performance (RAID 10). The default is capacity.

OBJECT-TYPE

This field is used to indicated how long to wait in minutes before including newly inserted drives into the RAID set. The delay allows for multiple drives to be inserted before the expansion begins. The default is 2 minutes.

OBJECT-TYPE

This field is deprecated.

OBJECT-TYPE

This field is used to specify by default what percentage of a volume is reserved for SnapShots. The default is 100%. It can be overriden on a per volume basis. If a volume, testvol, is 100MB, and the GroupDefaultSnapshotsize is 100%, than 100MB will reserved for SnapShots of testvol.

OBJECT-TYPE

This field is used to specify by default when the administrator is warned that the space used for SnapShots close to being exhausted. The default is 20%. It can be overriden on a per volume basis.

OBJECT-TYPE

This field specifies what should happen when the space reserved for SnapShots is exhuasted. The default is delete-oldest SnapShot.

OBJECT-TYPE

The field specifies the default timezone for the group HST (GMT-10:00) Hawaiian Standard Time: Pacific/Honolulu, AST (GMT-09:00) Alaskan Standard Time: America/Anchorage, PST (GMT-08:00) Pacific Standard Time: America/Los_Angeles, PNT (GMT-07:00) America/Phoenix, MST (GMT-07:00) US Mountain Standard Time: America/Denver, CST (GMT-06:00) Central Standard Time: America/Chicago, EST (GMT-05:00) Eastern Standard Time: America/New_York, IET (GMT-05:00) America/Indiana/Indianapolis, PRT (GMT-04:00) Atlantic Standard Time: America/Halifax, GMT (GMT-00:00) Greenwich Mean Time: GMT, ECT (GMT+01:00) Romance Standard Time: Europe/Paris, EET (GMT+02:00) Egypt Standard Time: Africa/Cairo, EAT (GMT+03:00) Saudi Arabia Standard Time: Asia/Riyadh, MET (GMT+03:30) Iran Standard Time: Asia/Tehran, NET (GMT+04:00) Arabian Standard Time: Asia/Yerevan, PLT (GMT+05:00) West Asia Standard Time: Asia/Karachi, IST (GMT+05:30) India Standard Time: Asia/Calcutta, BST (GMT+06:00) Central Asia Standard Time: Asia/Dacca, VST (GMT+07:00) Bangkok Standard Time: Asia/Bangkok, CTT (GMT+08:00) China Standard Time: Asia/Shanghai, JST (GMT+09:00) Tokyo Standard Time: Asia/Tokyo, ACT (GMT+09:30) Cen. Australia Standard Time: Australia/Darwin, AET (GMT+10:00) Sydney Standard Time: Australia/Sydney, SST (GMT+11:00) Central Pacific Standard Time: Pacific/Guadalcanal, NST (GMT+12:00) New Zealand Standard Time: Pacific/Fiji, MIT (GMT+13:00) Samoa Standard Time: Pacific/Apia, CNT (GMT-03:30) Newfoundland Standard Time: America/St_Johns, AGT (GMT-03:00) SA Eastern Standard Time: America/Buenos_Aires, BET (GMT-03:00) E South America Standard Time: America/Sao_Paulo, CAT (GMT-01:00) Azores Standard Time: Atlantic/Cape_Verde, Europe/Andorra, Asia/Dubai, Asia/Kabul, America/Antigua, America/Anguilla, Europe/Tirane, Asia/Yerevan, America/Curacao, Africa/Luanda, Antarctica/McMurdo, Antarctica/South_Pole, Antarctica/Rothera, Antarctica/Palmer, Antarctica/Mawson, Antarctica/Davis, Antarctica/Casey, Antarctica/Vostok, Antarctica/DumontDUrville, Antarctica/Syowa, America/Argentina/Buenos_Aires, America/Argentina/Cordoba, America/Argentina/Jujuy, America/Argentina/Tucuman, America/Argentina/Catamarca, America/Argentina/La_Rioja, America/Argentina/San_Juan, America/Argentina/Mendoza, America/Argentina/Rio_Gallegos, America/Argentina/Ushuaia, Pacific/Pago_Pago, Europe/Vienna, Australia/Lord_Howe, Australia/Hobart, Australia/Currie, Australia/Melbourne, Australia/Sydney, Australia/Broken_Hill, Australia/Brisbane, Australia/Lindeman, Australia/Adelaide, Australia/Darwin, Australia/Perth, America/Aruba, Europe/Mariehamn, Asia/Baku, Europe/Sarajevo, America/Barbados, Asia/Dhaka, Europe/Brussels, Africa/Ouagadougou, Europe/Sofia, Asia/Bahrain, Africa/Bujumbura, Africa/Porto-Novo, Atlantic/Bermuda, Asia/Brunei, America/La_Paz, America/Noronha, America/Belem, America/Fortaleza, America/Recife, America/Araguaina, America/Maceio, America/Bahia, America/Sao_Paulo, America/Campo_Grande, America/Cuiaba, America/Porto_Velho, America/Boa_Vista, America/Manaus, America/Eirunepe, America/Rio_Branco, America/Nassau, Asia/Thimphu, Africa/Gaborone, Europe/Minsk, America/Belize, America/St_Johns, America/Halifax, America/Glace_Bay, America/Moncton, America/Goose_Bay, America/Blanc-Sablon, America/Montreal, America/Toronto, America/Nipigon, America/Thunder_Bay, America/Pangnirtung, America/Iqaluit, America/Atikokan, America/Rankin_Inlet, America/Winnipeg, America/Rainy_River, America/Cambridge_Bay, America/Regina, America/Swift_Current, America/Edmonton, America/Yellowknife, America/Inuvik, America/Dawson_Creek, America/Vancouver, America/Whitehorse, America/Dawson, Indian/Cocos, Africa/Kinshasa, Africa/Lubumbashi, Africa/Bangui, Africa/Brazzaville, Europe/Zurich, Africa/Abidjan, Pacific/Rarotonga, America/Santiago, Pacific/Easter, Africa/Douala, Asia/Shanghai, Asia/Harbin, Asia/Chongqing, Asia/Urumqi, Asia/Kashgar, America/Bogota, America/Costa_Rica, America/Havana, Atlantic/Cape_Verde, Indian/Christmas, Asia/Nicosia, Europe/Prague, Europe/Berlin, Africa/Djibouti, Europe/Copenhagen, America/Dominica, America/Santo_Domingo, Africa/Algiers, America/Guayaquil, Pacific/Galapagos, Europe/Tallinn, Africa/Cairo, Africa/El_Aaiun, Africa/Asmara, Europe/Madrid, Africa/Ceuta, Atlantic/Canary, Africa/Addis_Ababa, Europe/Helsinki, Pacific/Fiji, Atlantic/Stanley, Pacific/Truk, Pacific/Ponape, Pacific/Kosrae, Atlantic/Faroe, Europe/Paris, Africa/Libreville, Europe/London, America/Grenada, Asia/Tbilisi, America/Cayenne, Europe/Guernsey, Africa/Accra, Europe/Gibraltar, America/Godthab, America/Danmarkshavn, America/Scoresbysund, America/Thule, Africa/Banjul, Africa/Conakry, America/Guadeloupe, Africa/Malabo, Europe/Athens, Atlantic/South_Georgia, America/Guatemala, Pacific/Guam, Africa/Bissau, America/Guyana, Asia/Hong_Kong, America/Tegucigalpa, Europe/Zagreb, America/Port-au-Prince, Europe/Budapest, Asia/Jakarta, Asia/Pontianak, Asia/Makassar, Asia/Jayapura, Europe/Dublin, Asia/Jerusalem, Europe/Isle_of_Man, Asia/Calcutta, Indian/Chagos, Asia/Baghdad, Asia/Tehran, Atlantic/Reykjavik, Europe/Rome, Europe/Jersey, America/Jamaica, Asia/Amman, Asia/Tokyo, Africa/Nairobi, Asia/Bishkek, Asia/Phnom_Penh, Pacific/Tarawa, Pacific/Enderbury, Pacific/Kiritimati, Indian/Comoro, America/St_Kitts, Asia/Pyongyang, Asia/Seoul, Asia/Kuwait, America/Cayman, Asia/Almaty, Asia/Qyzylorda, Asia/Aqtobe, Asia/Aqtau, Asia/Oral, Asia/Vientiane, Asia/Beirut, America/St_Lucia, Europe/Vaduz, Asia/Colombo, Africa/Monrovia, Africa/Maseru, Europe/Vilnius, Europe/Luxembourg, Europe/Riga, Africa/Tripoli, Africa/Casablanca, Europe/Monaco, Europe/Chisinau, Europe/Podgorica, Indian/Antananarivo, Pacific/Majuro, Pacific/Kwajalein, Europe/Skopje, Africa/Bamako, Asia/Rangoon, Asia/Ulaanbaatar, Asia/Hovd, Asia/Choibalsan, Asia/Macau, Pacific/Saipan, America/Martinique, Africa/Nouakchott, America/Montserrat, Europe/Malta, Indian/Mauritius, Indian/Maldives, Africa/Blantyre, America/Mexico_City, America/Cancun, America/Merida, America/Monterrey, America/Mazatlan, America/Chihuahua, America/Hermosillo, America/Tijuana, Asia/Kuala_Lumpur, Asia/Kuching, Africa/Maputo, Africa/Windhoek, Pacific/Noumea, Africa/Niamey, Pacific/Norfolk, Africa/Lagos, America/Managua, Europe/Amsterdam, Europe/Oslo, Asia/Katmandu, Pacific/Nauru, Pacific/Niue, Pacific/Auckland, Pacific/Chatham, Asia/Muscat, America/Panama, America/Lima, Pacific/Tahiti, Pacific/Marquesas, Pacific/Gambier, Pacific/Port_Moresby, Asia/Manila, Asia/Karachi, Europe/Warsaw, America/Miquelon, Pacific/Pitcairn, America/Puerto_Rico, Asia/Gaza, Europe/Lisbon, Atlantic/Madeira, Atlantic/Azores, Pacific/Palau, America/Asuncion, Asia/Qatar, Indian/Reunion, Europe/Bucharest, Europe/Belgrade, Europe/Kaliningrad, Europe/Moscow, Europe/Volgograd, Europe/Samara, Asia/Yekaterinburg, Asia/Omsk, Asia/Novosibirsk, Asia/Krasnoyarsk, Asia/Irkutsk, Asia/Yakutsk, Asia/Vladivostok, Asia/Sakhalin, Asia/Magadan, Asia/Kamchatka, Asia/Anadyr, Africa/Kigali, Asia/Riyadh, Pacific/Guadalcanal, Indian/Mahe, Africa/Khartoum, Europe/Stockholm, Asia/Singapore, Atlantic/St_Helena, Europe/Ljubljana, Arctic/Longyearbyen, Atlantic/Jan_Mayen, Europe/Bratislava, Africa/Freetown, Europe/San_Marino, Africa/Dakar, Africa/Mogadishu, America/Paramaribo, Africa/Sao_Tome, America/El_Salvador, Asia/Damascus, Africa/Mbabane, America/Grand_Turk, Africa/Ndjamena, Indian/Kerguelen, Africa/Lome, Asia/Bangkok, Asia/Dushanbe, Pacific/Fakaofo, Asia/Dili, Asia/Ashgabat, Africa/Tunis, Pacific/Tongatapu, Europe/Istanbul, America/Port_of_Spain, Pacific/Funafuti, Asia/Taipei, Africa/Dar_es_Salaam, Europe/Kiev, Europe/Uzhgorod, Europe/Zaporozhye, Europe/Simferopol, Africa/Kampala, Pacific/Johnston, Pacific/Midway, Pacific/Wake, America/New_York, America/Detroit, America/Kentucky/Louisville, America/Kentucky/Monticello, America/Indiana/Indianapolis, America/Indiana/Marengo, America/Indiana/Knox, America/Indiana/Vevay, America/Chicago, America/Indiana/Vincennes, America/Indiana/Petersburg, America/Menominee, America/North_Dakota/Center, America/North_Dakota/New_Salem, America/Denver, America/Boise, America/Shiprock, America/Phoenix, America/Los_Angeles, America/Anchorage, America/Juneau, America/Yakutat, America/Nome, America/Adak, Pacific/Honolulu, America/Montevideo, Asia/Samarkand, Asia/Tashkent, Europe/Vatican, America/St_Vincent, America/Caracas, America/Tortola, America/St_Thomas, Asia/Saigon, Pacific/Efate, Pacific/Wallis, Pacific/Apia, Asia/Aden, Indian/Mayotte, Africa/Johannesburg, Africa/Lusaka, Africa/Harare, Australia/Eucla, America/Indiana/Tell_City, America/Indiana/Winamac, America/Resolute, America/Marigot, Asia/Kolkata, Asia/Ho_Chi_Minh, America/St_Barthelemy, America/Argentina/San_Luis, America/Santarem, America/Argentina/Salta, Asia/Kathmandu, America/Ojinaga, America/Santa_Isabel, Asia/Novokuznetsk, America/Matamoros, Antarctica/Macquarie, America/Bahia_Banderas, Pacific/Pohnpei, Pacific/Chuuk, America/North_Dakota/Beulah, America/Metlakatla, America/Sitka, America/Kralendijk, America/Lower_Princes, Africa/Juba, Asia/Hebron, Europe/Tiraspol, America/Creston, Asia/Khandyga, Europe/Busingen, Asia/Ust-Nera

OBJECT-TYPE

This field specifies the loglevel for the group. The log level determines which messages are written to the console. The following levels are supported. The value of this object will be an OR of the values associated with each level. LEVEL VALUE ------- ------- INFO 0x04 WARNING 0x08 ERROR 0x10 FATAL 0x20 DIAG 0x40 AUDIT 0x80 Default value is INFO|WARNING|ERROR|FATAL = 0x04|0x08|0x10|0x20| = 0x3c = 60

OBJECT-TYPE

This field contains a use supplied description for the group. There is no default.

OBJECT-TYPE

This field specifies the prefix for the iSCSI target names. The default is iqn.2001-04.com.equallogic. This can be overriden on a per volume basis. However the name must conform to the iSCSI Specification.

OBJECT-TYPE

This field specifies whether or not to default the iSCSI alias to the name of the volume. This can be overriden on a per volume basis. The default is to set the iSCSI alias to the volume name.

OBJECT-TYPE

This field specifies the SNMP domain name used in the FROM email address in generated email. e.g., everything after @ in foo@equallogic.com .

OBJECT-TYPE

This field specifies the Well Known Name for the group. It must be a name which is resolvable by DNS. There is no default for Group Name.

OBJECT-TYPE

This field is deprecated and will be unsupported in the next release.

OBJECT-TYPE

This field specifies whether or not to allow web access to the group using https. The default is TRUE.

OBJECT-TYPE

This field specifies whether or not to allow web access to the group using http. The default is TRUE.

OBJECT-TYPE

This field specifies whether or not to allow ssh access to the group. The default is TRUE.

OBJECT-TYPE

This field specifies whether or not to allow telnet access to the group. The default is FALSE.

OBJECT-TYPE

This field is used to specify whether to notify administrators on alarms via email. The default is FALSE.

OBJECT-TYPE

This field is used to specify whether to notify administrators on alarms via SNMP TRAPS. The default is FALSE.

OBJECT-TYPE

This field is used to specify whether to notify administrators on alarms via syslog. The default is FALSE.

OBJECT-TYPE

This field is used to configure the type of events to be sent in email notifications. The following type of events are supported. info(4), warning(8), error(16), fatal(32) More than one type of event can be specified by adding the correspodning values. Ex: To specify warning,error,fatal the value can be set to 8+16+32 = 56. Setting this field to zero results in sending no events using email notification.

OBJECT-TYPE

This field is currently not being used.

OBJECT-TYPE

This field is used to configure the type of events to be sent in syslog notifications. The following type of events are supported. info(4), warning(8), error(16), fatal(32) More than one type of event can be specified by adding the correspodning values. Ex: To specify warning,error,fatal the value can be set to 8+16+32 = 56. Setting this field to zero results in sending no events using syslog notification.

OBJECT-TYPE

This field specifies the site where the volume resides. Sites are defined on a per array basis. Sites are used to define where primary and secondary copies of volume mirror reside. The default is the default site. This means that the location of the volume is unrestricted.

OBJECT-TYPE

An octet string containing the password to authenticate members joining the group. If written, it changes the password for the account. If read, it returns a zero-length string.

OBJECT-TYPE

This field is deprecated.

OBJECT-TYPE

Rowstatus

OBJECT-TYPE

If enabled, an object is zeroed out before reuse so that the new entity using the object will not be aware of the old contents of the object. This field is deprecated and is unsupported from 7.0.

OBJECT-TYPE

This field is deprecated and will be unsupported in the next release.

OBJECT-TYPE

This field is deprecated and will be unsupported in the next release.

OBJECT-TYPE

This field specifies whether or not to allow ftp access to the group. The default is TRUE.

OBJECT-TYPE

This field specifies user portion of the FROM email address used in generated email. e.g., everything before @ in foo@equallogic.com .

OBJECT-TYPE

This field specifies the facility code which you would like applied to all eqllog messages that are targeted at syslog.

OBJECT-TYPE

This field specifies whether or not to turn on Connection Load balancer. The default is TRUE.

OBJECT-TYPE

This field specifies whether or not to turn on volume balancing. The default is TRUE.

OBJECT-TYPE

If set to true, the list of volumes returned during discovery is filtered based on chap configuration in volume ACLs. The default is FALSE.

OBJECT-TYPE

This field specifies the customer email address for support to contact in the event of a system failure. Configuring this field will enable each member to send an e-mail to this address and customer support in the event of a critical hardware failure.

OBJECT-TYPE

This field specifies the receiving window size of the tcp connection established to secondary site during replication data transfer. Minimum value is 72KB.Maximum value is 2048KB.

OBJECT-TYPE

This field defines the common place holder for group wide configuration flag. The flags must be of type enable(1) or disable(0). and the default value will always be disable(0).

OBJECT-TYPE

A flag used internally by the iSCSI subsystem to determine the upgrade history of this storage group and infer the default iSCSI Target Portal Group ID. This value is changed internally by the group management daemon as members are added or upgraded such that the value is non zero if any group member has been previously configured with firmware prior to 2.3.6

OBJECT-TYPE

This field specifies the maximum number of replications that are transferring data at one time. The minimum value is 1, the maximum value is 16, and the default value is 16.

OBJECT-TYPE

The default eqliscsiVolumeThinWarnPercentage value used when creating thin provisoned volumes.

OBJECT-TYPE

The default eqliscsiVolumeThinMaxGrowPercentage value used when creating thin provisoned volumes.

OBJECT-TYPE

This field is used to indicate the default gateway for the management network. This field contains the address of the local router used to forward network traffic beyond the local management subnet. Gateways are used to connect multiple subnets. There is no default value for this entry.

OBJECT-TYPE

This field is used to indicate the default gateway for the management network. This field contains the address of the local router used to forward network traffic beyond the local management subnet. Gateways are used to connect multiple subnets. There is no default value for this entry.

OBJECT-TYPE

This field specifies the type of the IPv6 Well Known Address for the group. This is the IPv6 address iSCSI Initiators will used to connect to the group.

OBJECT-TYPE

This field specifies the IPv6 Well Known Address for the group. This is the IPv6 address iSCSI Initiators will used to connect to the group. There is no default value for this field.

OBJECT-TYPE

This field specifies the type of the IPv4 Well Known Address for the group. This is the IPv4 address iSCSI Initiators will used to connect to the group.

OBJECT-TYPE

This field specifies the IPv4 Well Known Address for the group. This is the IPv4 address iSCSI Initiators will used to connect to the group. There is no default value for this field.

OBJECT-TYPE

This field is used to indicate the slow switch support for the group.

OBJECT-TYPE

This field represents the profile identifier.

OBJECT-TYPE

This field specifies whether or not the SSH service should support the V1 Protocol. The default is TRUE.

OBJECT-TYPE

This field specifies if the standby button on the Pirates/Porfidio enclosures will be enabled/disabled. The default is FALSE.

OBJECT-TYPE

This field enables LDAP login authentication.

OBJECT-TYPE

OBJECT-TYPE

Default VLAN ID for DCB control packets on interfaces.

OBJECT-TYPE

This field specifies whether thermal shutdownn override is enabled or disabled.

OBJECT-TYPE

This field specifies whether legacy crypto protocols should be enabled or not. This affects what protocols should be supported by applications such as SSH server, HTTPS server, LDAP client, SNMPv3 agent, etc.

OBJECT-TYPE

This field specifies the maximum number of replica segments of 256K size per volume that are transferring data at one time. The minimum value is 1, the maximum value is 60, and the default value is 60.

OBJECT-TYPE

This field specifies whether or not the recoverable volume feature is enabled. The default value is enabled.

OBJECT-TYPE

This is the number of minutes a session may remain idle before being logged out for inactivty. The maximum timeout value is 24 hours or 1440 minutes. The minimum value is 1 minute. The default value is 30 minutes.

OBJECT-TYPE

Enable/disable the idle session timeout feature. The default is disabled.

OBJECT-TYPE

Enable/disable the session banner feature. The default is disabled.

OBJECT-TYPE

This field allows the user a way to change the default behavior of snapshot borrowing on new volume creates across the group.

OBJECT-TYPE

This field enables or disables the lifetime that a deleted volume can remain in the recovery bin. When enabled, a volume will be permanently deleted after the recovery lifetime in the recovery bin.

OBJECT-TYPE

This field defines the amount of time (in seconds) that a deleted volume can remain in the recovery bin before being permanently deleted by the system. The default value (0) is one week.

OBJECT-TYPE

This field specifies the active network time protocol. The value may be ntp(0) or sntp(1) with a default value of ntp(0).

OBJECT-TYPE

This field defines the frequency (in seconds) that the system will scan for volumes that have been in the recovery bin past their lifetime. The default value is one scan every 24 hours.

OBJECT-TYPE

Enable/disable update available checking.

OBJECT-TYPE

The time of last update performed represented as the number of seconds since the epoch.

OBJECT-TYPE

This field specifies, in bytes, the default volume sector size for this group.

OBJECT-TYPE

This index is the last assigned index value associated with VVol Volumes.

OBJECT-TYPE

Enable/Disable the snapshot compression scanner.

OBJECT-TYPE

UTC timestamp when to display the monitoring connection reminder. 0 to display immediately. 0x7fffffff to never display.

OBJECT-TYPE

EqualLogic-Dynamic Group Status Table

OBJECT-TYPE

An entry (row) containing Group status information.

OBJECT-TYPE

This field specifies the total size of the Storage Pool in MBs.

OBJECT-TYPE

This field specifies the total space reserved for volume data within the Storage Pool in MBs. Note that this value does not include space reserved for snapshots or replication.

OBJECT-TYPE

This field specifies the number of group members which are online.

OBJECT-TYPE

This field specifies the total space reserved for SnapShot data within the Storage Pool in MBs.

OBJECT-TYPE

This field specifies the total reserved space in use by snapshots in the storage pool . This will be equal to sum of eqlMemberSnapStorage for all members.

OBJECT-TYPE

This field specifies the current time in group represented as number of seconds since epoch.

OBJECT-TYPE

This field specifies the total number of snapshots within the group that currently have active iSCSI connections.

OBJECT-TYPE

This field specifies the total number of snapshotsvolumes within the group that currently have active iSCSI connections.

OBJECT-TYPE

This field specifies the total number of snapshots available for iSCSI connections.

OBJECT-TYPE

This field specifies the total number of volumes available for iSCSI connections.

OBJECT-TYPE

This field specifies the total number of snapshots in this group.

OBJECT-TYPE

This field specifies the total number of volumes in this group.

OBJECT-TYPE

This field specifies the total number of members in this group irrelevant of current member state.

OBJECT-TYPE

This field specifies the total number of online+offline members in this group.

OBJECT-TYPE

This field specifies the total free space of the Storage Pool in Mega Bytes.

OBJECT-TYPE

This field specifies the amount of free space of the Storage Pool which has been partitioned for use by external services such as remote replication. This space is reserved and can be controlled by the users of these services. This sum represents total space reserved by all of the entries in the replicant site table

OBJECT-TYPE

This field specifies the amount of space used by external services such as remote replication. This sum represents total space used by all of the entries in the replicant site table

OBJECT-TYPE

This sum represents total space reserved for all volumes for replication purposes.

OBJECT-TYPE

This sum represents total space in use for all volumes for replication purposes. This value will be equal to sum of eqlMemberReplStorage for all members.

OBJECT-TYPE

This field specifies the total subscribed space for all volumes in the group. For a thin provisioned volume, subscribed space is the advertised space. For a regular volume, subscribed space is the volume size. The value of this field will be equal to sum of eqliscsiVolumeSize field in volume mib.

OBJECT-TYPE

The value of this object represents the sum of actual materialized pages for all volumes in the group.

OBJECT-TYPE

This field represents the amount of space consumed by fail-back replicasets in this storage group.

OBJECT-TYPE

This field represents the amount of space available for Thin Provisioned Volumes in this storage group.

OBJECT-TYPE

This field gives the number of iSCSI connections that are currently connected to volumes in this group.

OBJECT-TYPE

This represents the total space still available for Snapshot usage.

OBJECT-TYPE

This represents the total space still available for Replica Snapshot usage.

OBJECT-TYPE

This represents an ID uniquely representing a group.

OBJECT-TYPE

This field specifies the total number of volumes in this group, adjusted to remove volumes not typically visible such as synchronous replication standbys.

OBJECT-TYPE

This field specifies the total number of volumes available for iSCSI connections, excluding synchronous replication standbys.

OBJECT-TYPE

This field specifies the total number of volumes within the group that currently have active iSCSI connections excluding synchronous replication standbys.

OBJECT-TYPE

This field specifies the total subscribed space for all volumes in the group. For a thin provisioned volume, subscribed space is the advertised space. For a regular volume, subscribed space is the volume size. The value of this field will be equal to sum of eqliscsiVolumeSize field in volume mib. This value is adjusted to exclude subscribed space for synchronous replication standby volumes.

OBJECT-TYPE

This field specifies the total amount of borrowing against other volume's free snapshot reserve and pool free space. This includes snapshots and recoverable volumes.

OBJECT-TYPE

This field specifies the total number of storage containers within the group.

OBJECT-TYPE

This field specifies the total number of volume resources that are being consumed within all storage containers.

OBJECT-TYPE

This field specifies the total number of snapshot resources that are being consumed within all storage containers.

OBJECT-TYPE

This field specifies the total number of online volume resources that are being consumed within all storage containers.

OBJECT-TYPE

This field specifies the total amount of storage that is being consumed within all storage containers.

OBJECT-TYPE

This field specifies the total amount of space in MB that is currently utilized for compressed pages. This is a dynamic value and cannot be set.

OBJECT-TYPE

This field specifies the total amount of space in MB that would be utilized by compressed pages if there was no compression.

OBJECT-TYPE

This field specifies the total number of snapshot resources that are being consumed for replication. This includes inbound replicas, and temporary snapshots used for in-progress outbound replication.

OBJECT-TYPE

This field specifies the total number of bound volume across all storage containers.

OBJECT-TYPE

EqualLogic-Persistent Storage Group Site Table

OBJECT-TYPE

An entry (row) containing storage group site information.

OBJECT-TYPE

This field specifies the unique index used to identify a site.

OBJECT-TYPE

This field specifies the name of the site default site for the group.

OBJECT-TYPE

This field contains a description of the site. For example the phsyical address of the site. There is no default.

OBJECT-TYPE

This field specifies the email address of the Administrators responsible for this site.

OBJECT-TYPE

This field specifies the phone number of the Administrator responsible for this site.

OBJECT-TYPE

This field specifies the cell phone number of the Administrator responsible for this site.

OBJECT-TYPE

Row status

OBJECT-TYPE

EqualLogic-Persistent Storage Group DNS Server Table TimeoutAll:600

OBJECT-TYPE

An entry (row) containing group dns server information.

OBJECT-TYPE

This field specifies an index that uniquely identifies the DNS server entry.

OBJECT-TYPE

This field is deprecated and will be unsupported in the next release.

OBJECT-TYPE

row status

OBJECT-TYPE

This field contains the IP address type for the DNS server.

OBJECT-TYPE

This field contains the IP address, in network byte order, for the DNS server.

OBJECT-TYPE

This field denotes the transaction state of the eqlStorageGroupDnsServerTable.

OBJECT-TYPE

EqualLogic-Persistent Storage Group NTP Server Table

OBJECT-TYPE

An entry (row) containing group ntp server information.

OBJECT-TYPE

This field specifies an index that uniquely identifies the NTP server entry.

OBJECT-TYPE

This field is deprecated and will be unsupported in the next release.

OBJECT-TYPE

row status

OBJECT-TYPE

The listening port number of the ntp server.Default value implies well known ntp port number ( 123 ) assigned by the IANA.

OBJECT-TYPE

This field contains the IP address type for the NTP server.

OBJECT-TYPE

This field contains the IP address, in network byte order, for the NTP server.

OBJECT-TYPE

EqualLogic-Persistent Storage Group Chap Server Table

OBJECT-TYPE

An entry (row) containing storage group chap server information.

OBJECT-TYPE

This field specifies an index that uniquely identifies the CHAP server entry.

OBJECT-TYPE

This field is deprecated and will be unsupported in the next release.

OBJECT-TYPE

row status

OBJECT-TYPE

The listening port number of chap server at the specified ipaddress. The default value of zero implies that the authentication request will be forwarded to the default radius port(port number 1812). The value of this object is irrelevant if eqlGroupChapServerInetAddress is the loopback ipaddress.

OBJECT-TYPE

This field contains the RADIUS secret for this client. It can be set but it returns a zero-length string upon read.

OBJECT-TYPE

This field contains the IP address type for the CHAP server.

OBJECT-TYPE

This field contains the IP address, in network byte order, for the CHAP server.

OBJECT-TYPE

EqualLogic-Persistent Storage Group SMTP Server Table

OBJECT-TYPE

An entry (row) containing group smtp sever information.

OBJECT-TYPE

This field specifies an index that uniquely identifies the SMTP server entry.

OBJECT-TYPE

This field is deprecated and will be unsupported in the next release.

OBJECT-TYPE

row status

OBJECT-TYPE

The listening port number of the SMTP server. The default value of zero implies that the server is listening on wellknown port number ( 25 ) for SMTP asssigned by the IANA.

OBJECT-TYPE

This field contains the IP address type for the SMTP server.

OBJECT-TYPE

This field contains the IP address, in network byte order, for the SMTP server.

OBJECT-TYPE

EqualLogic-Persistent Storage Group SysLog Server Table

OBJECT-TYPE

An entry (row) containing group syslog server info.

OBJECT-TYPE

This field specifies an index that uniquely identifies the syslog server entry.

OBJECT-TYPE

This field is deprecated and will be unsupported in the next release.

OBJECT-TYPE

row status

OBJECT-TYPE

This field contains the IP address type for the syslog server.

OBJECT-TYPE

This field contains the IP address, in network byte order, for the syslog server.

OBJECT-TYPE

EqualLogic-Persistent Storage Group Email Alert Table

OBJECT-TYPE

An entry (row) containing group alert email info.

OBJECT-TYPE

This field specifies an index that uniquely identifies the email user to alert.

OBJECT-TYPE

This field specifies the email address of the Adminstrator targeted to recieve the email the email alerts.

OBJECT-TYPE

row status

OBJECT-TYPE

EqualLogic-Persistent Storage Group Administration account table. This table contains a collection of administration account records. It is indexed by group id and administration account record index.

OBJECT-TYPE

An entry (row) containing administration account settings.

OBJECT-TYPE

The index value that uniquely identifies the administration account record.

OBJECT-TYPE

This value is used to manage the conceptual row.

OBJECT-TYPE

EQL-SECONDARY-KEY The name of the administration account. This name must be used for user authentication.

OBJECT-TYPE

An octet string containing the (crypt cipher) password for this account. If written, it changes the password for the account. If read, it returns a zero-length string.

OBJECT-TYPE

This field contains a description of the administration account.

OBJECT-TYPE

This field specifies the type of account. The read-write account type allows the user to modify any group settings. The read-only account allows only read-only access to group configuration data. The default is read-write. Changing this value will come into affect only for new login of the user. Currently logged in sessions will not be affected.

OBJECT-TYPE

This field contains the full name of the owner of this administration account.

OBJECT-TYPE

This field specifies the email address of the owner of this administration account.

OBJECT-TYPE

This field specifies the phone number of the owner of this administration account.

OBJECT-TYPE

This field specifies the cell phone number of the owner of this administration account.

OBJECT-TYPE

This field represents the administration status of the account. Disabling the account will prevent the user from logging into CLI and GUI. Currently logged-in sessions will not be affected.

OBJECT-TYPE

This field specifies the set of configuration flags used by the CLI. These flags allow the administrator to save CLI configuration settings between the CLI sessions. The meaning of individual bits is not defined yet. TBD

OBJECT-TYPE

This field specifies the set of configuration flags used by the GUI. These flags allow the administrator to save GUI configuration settings between the GUI sessions. The meaning of individual bits is not defined yet. TBD

OBJECT-TYPE

The value of this field specifies how often the group configuration data must be repolled by the GUI. This value is expressed in seconds. The minimum is 5 seconds; the maximum is 1 hour. The default is 30 seconds.

OBJECT-TYPE

This field represents the type of authentication for the administrator. Note that RADIUS/LDAP type users will only appear in the table after a successful login.

OBJECT-TYPE

This field represents a timestamp of the most recent time this admin account has logged in. Currently only applies to radius auth type users.

OBJECT-TYPE

This field contains the contents of the class attribute received in the RADIUS Access-Request and must be reflected in the RADIUS Accounting-Request if accounting is enabled.

OBJECT-TYPE

This field specifies the privilege level of the account. The default is global-admin. global-admin grants full access to the administrator. pool-admin designates the administrator to have access only to one or more pools, and does not have access to global and group-level administrator. volume-admin designates the administrator to have access to specific volumes within specific storage pools.

OBJECT-TYPE

This field contain part of the SNMP key for this account.

OBJECT-TYPE

This field contain part of the SNMP second key for this account.

OBJECT-TYPE

An octet string containing the (cleartext) password for this account. If written, it changes the password for the account. If read, it returns a zero-length string.

OBJECT-TYPE

A value to uniquely identify this account. The MIB attribute eqliscsiVolumeAdminAccountKey uses this value to associate a volume with an account. No two accounts can have the same value.

OBJECT-TYPE

The name of the Active Directory group, valid only when auth type is LDAP. Same as cn attribute of the AD group.

OBJECT-TYPE

An enum field used by the Agent to determine which privacy protocol is used to encrypt external SNMP messages for this user.

OBJECT-TYPE

EqualLogic-Persistent Storage Group iSNS Server Table

OBJECT-TYPE

An entry (row) containing group iSNS server information.

OBJECT-TYPE

This field specifies an index that uniquely identifies the iSNS server entry.

OBJECT-TYPE

Used to manage conceptual row.

OBJECT-TYPE

This field is deprecated and will be unsupported in the next release.

OBJECT-TYPE

Indicates the port the iSNS server is accepting iSNSP messages on, generally the iSNS well known port.The well known port for iSNSP is 3205. The default value implies to use well known port.

OBJECT-TYPE

This field contains the IP address type for the iSNS server.

OBJECT-TYPE

This field contains the IP address, in network byte order, for the iSNS server.

OBJECT-TYPE

EqualLogic-Dynamic Group Compatibility Table

OBJECT-TYPE

An entry (row) containing group compatibility information.

OBJECT-TYPE

This field represents the current compatibility level of the group.

OBJECT-TYPE

EqualLogic-Dynamic Group Collection Table. This table maintains overall number of volume collections and snap collection in a group.

OBJECT-TYPE

An entry (row) containing volume/snap collections information in a group.

OBJECT-TYPE

This field specifies the total number of volume collections in the group ie number of rows in eqliscsiVolCollectionTable.

OBJECT-TYPE

This field specifies the total number of snapshot collections in the group ie number of rows in eqliscsiSnapCollectionTable.

OBJECT-TYPE

This field specifies the total number of snapshot collections in the group that dont have a corresponding volume set ie number of rows in eqliscsiSnapCollectionTable with eqliscsiSnapCollectionVolIndex set to zero.

OBJECT-TYPE

EqualLogic-Persistent Group RADIUS Configuration Table. This table maintains the configuration for the RADIUS implementation.

OBJECT-TYPE

An entry (row) containing RADIUS information in a group.

OBJECT-TYPE

This field contains the RADIUS secret for this client. It can be set but it returns a zero-length string upon read.

OBJECT-TYPE

This field enables RADIUS login authentication.

OBJECT-TYPE

This field configures the RADIUS authentication message receive timeout in seconds.

OBJECT-TYPE

This field configures the number of RADIUS authentication retries.

OBJECT-TYPE

This field enables RADIUS accounting for login administrators.

OBJECT-TYPE

This field configures the RADIUS accounting message receive timeout in seconds.

OBJECT-TYPE

This field configures the number of RADIUS accounting retries.

OBJECT-TYPE

This field enables RADIUS authentication for ISCSI initiators.

OBJECT-TYPE

This field enables Local authentication for ISCSI initiators.

OBJECT-TYPE

This field enables requiring the EQL-Admin RADIUS return attribute.

OBJECT-TYPE

EqualLogic-Persistent Group RADIUS Accounting server table.

OBJECT-TYPE

An entry (row) containing the configuration for a RADIUS accounting server.

OBJECT-TYPE

This field specifies an index that uniquely identifies the RADIUS Accounting server entry.

OBJECT-TYPE

This field is deprecated and will be unsupported in the next release.

OBJECT-TYPE

The listening port number of the RADIUS Accounting server at the specified ipaddress. The default value of zero implies that the accounting request will be forwarded to the default RADIUS Accounting port(port number 1813).

OBJECT-TYPE

row status

OBJECT-TYPE

This field contains the RADIUS secret for this client. It can be set but it returns a zero-length string upon read.

OBJECT-TYPE

This field contains the IP address type for the RADIUS Accounting server.

OBJECT-TYPE

This field contains the IP address, in network byte order, for the RADIUS Accounting server.

OBJECT-TYPE

EqualLogic-Dynamic user session table.

OBJECT-TYPE

An entry (row) containing an active user administrative session.

OBJECT-TYPE

This field specifies an index that uniquely identifies the user session entry.

OBJECT-TYPE

This field specifies an index that uniquely identifies a storage group admin account entry.

OBJECT-TYPE

The timestamp from the start of the administrative session.

OBJECT-TYPE

The incoming protocol through which the administrator is connecting to the array.

OBJECT-TYPE

This field is deprecated and will be unsupported in the next release.

OBJECT-TYPE

This field is deprecated and will be unsupported in the next release.

OBJECT-TYPE

The remote IP address type, if applicable, from which the administrator is connecting.

OBJECT-TYPE

The remote IP address, if applicable, from which the administrator is connecting.

OBJECT-TYPE

The local interface IP address type, if applicable, at which the administrator is connecting.

OBJECT-TYPE

The local interface IP address, if applicable, at which the administrator is connecting.

OBJECT-TYPE

EqualLogic record version table.

OBJECT-TYPE

An entry (row) containing min and max record version.

OBJECT-TYPE

This field identifies a specific MIB table by tableType_t (see tableTypes.h).

OBJECT-TYPE

This field specifies the lowest REC_HDR::major value found in any record of this table.

OBJECT-TYPE

This field specifies the current REC_HDR::major value for records of this table.

OBJECT-TYPE

EqualLogic-Persistent task table. A row in this table represents a task currently executing in the group.

OBJECT-TYPE

A row in the table represents a task. Any given task will have multiple sub tasks. Each sub task involves executing a management operation. The system will execute each sub task one after another until the task is completed.

OBJECT-TYPE

This field specifies an index that uniquely identifies a task.

OBJECT-TYPE

This field is used to manage the conceptual row.

OBJECT-TYPE

This field represents the type of the task.

OBJECT-TYPE

Context associated with the task. For ex: a volume or replicaset.

OBJECT-TYPE

Number of subtasks in this task.

OBJECT-TYPE

Subtask that is currently in progress for this task.

OBJECT-TYPE

Status of currently executing subtask.

OBJECT-TYPE

set to true if user action is required for the task to proceed further.

OBJECT-TYPE

user action on the task.

OBJECT-TYPE

time at which this task started represented as number of seconds since epoch.

OBJECT-TYPE

If set to true, a manual replica will be created when performing replication.

OBJECT-TYPE

EqualLogic-Persistent Group Profile Table

OBJECT-TYPE

An entry (row) containing the profile limits and configuration information.

OBJECT-TYPE

This field specifies the current version of the Profile. The most significant 16 bits are the compat level, the least significant 16 bits are the profile version.

OBJECT-TYPE

This field specifies the current weight of the Profile

OBJECT-TYPE

This field specifies the maximum members that can exist in the group with this profile id.

OBJECT-TYPE

This field specifies the maximum number of volumes in group.

OBJECT-TYPE

This field specifies the maximum number of snaps in group.

OBJECT-TYPE

This field specifies the maximum number of snaps per volume.

OBJECT-TYPE

This field specifies the maximum number of Replicas per volume.

OBJECT-TYPE

This field specifies the maximum number of replication volumes in group.

OBJECT-TYPE

This field specifies the maximum number of connections allowed per pool.

OBJECT-TYPE

This field specifies the maximum number of partners in group.

OBJECT-TYPE

This field specifies when will warning be issued for connection limit.

OBJECT-TYPE

This field specifies the maximum number of Sync Repl volumes allowed in the group.

OBJECT-TYPE

EqualLogic-Dynamic table converting a eqlStorageGroupAdminAccountKey to a eqlStorageGroupAdminAccountIndex.

OBJECT-TYPE

An entry (row) containing the value of the account index.

OBJECT-TYPE

The index to use to access the group admin account associated with the key specified.

OBJECT-TYPE

EqualLogic-Persistent Storage Group CHAP account table. This table contains a collection of CHAP account records, each containing Equallogic specific CHAP account information. It is indexed by group id and CHAP account record index. There should be a row in this table for every row with index 1.1.X in table ipsAuthCredChapAttributesTable. Also, chapIndex is equal to ipsAuthCredIndex.

OBJECT-TYPE

An entry (row) containing administration account settings.

OBJECT-TYPE

The index value that uniquely identifies the CHAP account record.

OBJECT-TYPE

This value is used to manage the conceptual row.

OBJECT-TYPE

A value to uniquely identify this administrative account that created this CHAP account. This value matches the eqlStorageGroupAdminAccountKey of the creating account. If no account exists with a matching account key, then the administrative account that created this CHAP account has been deleted.

OBJECT-TYPE

If true, the name of the associated CHAP account is viewable by all admin accounts. If false, the name of the associated CHAP account is not viewable by volume administrator accounts that did not create the associated CHAP account

OBJECT-TYPE

EqualLogic-Persistent Group LDAP Accounting server table.

OBJECT-TYPE

An entry (row) containing the configuration for a LDAP server.

OBJECT-TYPE

This field specifies an index that uniquely identifies the LDAP server entry.

OBJECT-TYPE

This field contains the LDAP server BASE DN used for ldapsearch queries.

OBJECT-TYPE

This field represent the security protocol between PS Group and the LDAP server. Default value is none meaning that the user credentials will be sent over the network in plain text.

OBJECT-TYPE

This field contains the IP address type for the LDAP Accounting server.

OBJECT-TYPE

This field contains the IP address, in network byte order, for the LDAP Accounting server.

OBJECT-TYPE

The listening port number of the LDAP Accounting server at the specified ipaddress. The default value of zero implies that the accounting request will be forwarded to the default LDAP Accounting port (389).

OBJECT-TYPE

This field specifies whether an anonymous bind can be done, in which case the bind DN and the bind password are not needed. The default is no anonymous access.

OBJECT-TYPE

This field contains the LDAP bind DN (username) for this client. It can be set but it returns a zero-length string upon read.

OBJECT-TYPE

This field contains the LDAP bind password for this client. It can be set but it returns a zero-length string upon read.

OBJECT-TYPE

row status

OBJECT-TYPE

EqualLogic-Persistent Group Active directory group table. Stores the access that an AD group or account receives when logging in through an entry in this table.

OBJECT-TYPE

An entry (row) containing the configuration for the LDAP object access details.

OBJECT-TYPE

The name of the LDAP object access description. For AD groups, it is the same as cn attribute of the AD group. For LDAP accounts, it is the same as the account name. Length allows for terminating null terminating character.

OBJECT-TYPE

This field represents the type of LDAP object that this entry grants access to.

OBJECT-TYPE

This field specifies the privilege level of the account that logs in through this LDAP object access. The default is global-admin. Global-admin grants full access to the administrator. Pool-admin designates the administrator to have access only to one or more pools, and does not have access to global and group-level administrator. Volume-admin designates the administrator to have access to specific volumes within specific storage pools

OBJECT-TYPE

This field specifies the type of account. The read-write account type allows the user to modify any group settings. The read-only account allows only read-only access to group configuration data. The default is read-write. Changing this value will come into affect only for new login of the user. Currently logged in sessions will not be affected. Read-only account is only applicable for group admin accounts/pool-admin accounts. Group-admins with read-only set cannot modify any settings.

OBJECT-TYPE

This field indicates the status of this entry.

OBJECT-TYPE

The name of the AD Domain associated with this LDAP object. Length allows for terminating null terminating character.

OBJECT-TYPE

EqualLogic-Persistent Storage Group DNS Suffix Table TimeoutAll:600

OBJECT-TYPE

An entry (row) containing group dns suffix information.

OBJECT-TYPE

This field specifies an index that uniquely identifies the DNS suffix entry.

OBJECT-TYPE

row status

OBJECT-TYPE

This field contains a suffix string.

OBJECT-TYPE

This field denotes the transaction state of the eqlStorageGroupDnsSuffixTable.

OBJECT-TYPE

EqualLogic-Dynamic Storage Group Snmp Table. Used solely to communicate Group Snmp params to the Appliance.

OBJECT-TYPE

An entry (row) containing snmp information.

OBJECT-TYPE

Rowstatus

OBJECT-TYPE

Specifies a list of SNMP managers that can receive SNMP traps. Contains Max of 5 comma separated IP addresses.

OBJECT-TYPE

Specifies the trap read-only community string.

OBJECT-TYPE

EqualLogic-Persistent Storage Group Session Banner Table

OBJECT-TYPE

An entry (row) containing session banner information.

OBJECT-TYPE

Rowstatus

OBJECT-TYPE

Up to 1000 bytes of UTF-8 string to display at the beginning of any session

OBJECT-TYPE

EqualLogic-Dynamic Single Sign on status table

OBJECT-TYPE

An entry (row) containing session Single Sign on status information.

OBJECT-TYPE

This field specifies the local status for signle sign on as maintained by the PS group It will be set to Ready if an attempt to join the AD server had succeeded with the current group name and current AD domain (as set setup in eqlLDAPServerTable)

OBJECT-TYPE

This field specifies the group name that was registered with the AD server

OBJECT-TYPE

This field contains kerberos relam or the domain name expressed using a dot notation. This field should match the dc part of the BASE DN in the eqlLDAPServerTable.

OBJECT-TYPE

EqualLogic-Dynamic Next Available Index Table This table tracks the next available index for a specified table type.

OBJECT-TYPE

An entry (row) which tracks an available index for the specified table type.

OBJECT-TYPE

This field indicates the table for which this index is maintained (from tableTypes.h).

OBJECT-TYPE

This field maintains the last db index value used for the specified table.

OBJECT-TYPE

EqualLogic-Dynamic Storage Group Snmp Read Only Community Table. Used solely to manage the Group SNMP read only community string.

OBJECT-TYPE

An entry (row) containing snmp community information.

OBJECT-TYPE

Specifies SNMP read only community string.

OBJECT-TYPE

EqualLogic-Persistent EULA acceptance information table. This table contains a single record that stores information associated with the most recent EULA accepted.

OBJECT-TYPE

An entry (row) containing EULA acceptance information.

OBJECT-TYPE

The firmware type of the accepted EULA.

OBJECT-TYPE

This value is used to manage the conceptual row.

OBJECT-TYPE

The name of the administration account used to accept the EULA.

OBJECT-TYPE

The version of the accepted EULA.

OBJECT-TYPE

The timestamp when the EULA was accepted..

OBJECT-IDENTITY

OBJECT-IDENTITY