MIBs Depot

EQL-DCB-MIB

Registered at
1.3.6.1.4.1.12740.19
Last updated
2015-03-17 15:28
Organization
EqualLogic Inc.
Revisions
2011-01-27 00:00
Namespace
equallogic
Source file
EQL-DCB-MIB
Digest
sha256:8887fba135efa1934f97254fdae36f5fd6939604124b388a0008650bc47b513f

Description

Data Center Bridging MIB module. Copyright (c) 2010-2011 by Dell, Inc. All rights reserved. This software may not be copied, disclosed, transferred, or used except in accordance with a license granted by Dell, Inc. This software embodies proprietary information and trade secrets of Dell, Inc. Copyright (C) IEEE (2009). This version of this MIB module is published as clause 17.7 of IEEE Std 802.1Qaz; see the standard itself for full legal notices.

Contact

Contact: Customer Support Postal: Dell Inc 300 Innovative Way, Suite 301, Nashua, NH 03062 Tel: +1 603-579-9762 E-mail: US-NH-CS-TechnicalSupport@dell.com WEB: www.equallogic.com

Imports

FromSymbols
EQLGROUP-MIBeqlGroupId
EQLMEMBER-MIBeqlMemberIndex
EQUALLOGIC-SMIequalLogic
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Counter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, enterprises, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TimeInterval, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

EQL-DCB-MIB
EQLGROUP-MIB
EQLMEMBER-MIB
EQUALLOGIC-SMI
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
EqlDcbxAppProtocol
TEXTUAL-CONVENTION
Contains the application protocol indicator the type of which is specified by an object with the syntax of EqlDcbxAppSelector
current
EqlDcbxAppSelector
TEXTUAL-CONVENTION
Indicates the contents of a protocol object 0: Ethertype 1: TCP Port number 2: UDP Port number 3: Port number over both TCP and UDP 4: Port number over neither TCP nor UDP
current
EqlDcbxMode
TEXTUAL-CONVENTION
Indicates the current operating mode of DCB.
current
EqlDcbxState
TEXTUAL-CONVENTION
Indicates the current state of a DCB feature.
current
EqlDcbxSupportedCapacity
TEXTUAL-CONVENTION
Indicates the supported capacity of a given feature, for example, the number of traffic classes supported. This TC is used for features that have a maximum capacity of eight but may have fewer supported.
current
EqlDcbxTrafficClassGroupValue
TEXTUAL-CONVENTION
Indicates a traffic class group. Values 0-7 correspond to traffic class groups.
current
EqlDcbxTransmissionSelectionAlgorithm
TEXTUAL-CONVENTION
Indicates the Transmission Selection Algorithm 0: Strict priority 1: Credit-based shaper 2: Enhanced transmission selection 3-254: Reserved 255: Vendor-specific.
current
EqlDcbxVlanState
TEXTUAL-CONVENTION
Indicates the current state of VLAN tagging.
current
EqlIEEE8021PriorityValue
TEXTUAL-CONVENTION
An 802.1Q user priority value.
current
EqlIEEEDraftSubtypeValue
TEXTUAL-CONVENTION
The sub-type to use within an 802.1Q draft TLV.
current
EqlVlanIdentifier
TEXTUAL-CONVENTION
A value used to identify a VLAN for VLAN tagged frames.
current

Objects

NameOIDSyntaxAccessStatus
eqlDcbMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.12740.19.1
eqlDcbStaticIfTable
OBJECT-TYPE
EqualLogic-Persistent A table of DCB information per each interface of a system. Each row in this table supplies values for one port's DCB parameters.
1.3.6.1.4.1.12740.19.1.1not-accessiblecurrent
eqlDcbStaticIfEntry
OBJECT-TYPE
An entry in the DCB table, containing information about DCB on a single interface.
1.3.6.1.4.1.12740.19.1.1.1not-accessiblecurrent
eqlDcbxConfigTCSupportedTxEnable
OBJECT-TYPE
This field is deprecated.
1.3.6.1.4.1.12740.19.1.1.1.1TruthValueread-writedeprecated
eqlDcbxConfigETSConfigurationTxEnable
OBJECT-TYPE
The eqlDcbxConfigETSConfigurationTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined ETS Configuration TLV transmission is allowed on a given LLDP transmission capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system.
1.3.6.1.4.1.12740.19.1.1.1.2TruthValueread-writecurrent
eqlDcbxConfigETSRecommendationTxEnable
OBJECT-TYPE
The eqlDcbxConfigETSRecommendationTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined ETS Recommendation TLV transmission is allowed on a given LLDP transmission capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system.
1.3.6.1.4.1.12740.19.1.1.1.3TruthValueread-writecurrent
eqlDcbxConfigPFCTxEnable
OBJECT-TYPE
The eqlDcbxConfigPFCTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined Priority-based Flow Fontrol TLV transmission is allowed on a given LLDP transmission capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system.
1.3.6.1.4.1.12740.19.1.1.1.4TruthValueread-writecurrent
eqlDcbxConfigAppPriorityTxEnable
OBJECT-TYPE
The eqlDcbxConfigAppPriorityTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined Application Priority TLV transmission is allowed on a given LLDP transmission capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system.
1.3.6.1.4.1.12740.19.1.1.1.5TruthValueread-writecurrent
eqlDcbxConfigQcnTxEnable
OBJECT-TYPE
The eqlDcbxConfigQcnTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined Quantitized Congestion Notification TLV transmission is allowed on a given LLDP transmission capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system.
1.3.6.1.4.1.12740.19.1.1.1.6TruthValueread-writecurrent
eqlDcbxAdminTCSupported
OBJECT-TYPE
This field is deprecated.
1.3.6.1.4.1.12740.19.1.1.1.7EqlDcbxSupportedCapacityread-writedeprecated
eqlDcbxAdminETSConMaxTCG
OBJECT-TYPE
Indicates the number of Traffic Class Groups supported on the remote system. A value of 0 indicates that 8 Traffic Class Groups are supported.
1.3.6.1.4.1.12740.19.1.1.1.8EqlDcbxSupportedCapacityread-writecurrent
eqlDcbxAdminETSConWilling
OBJECT-TYPE
Indicates if the local system is willing to accept the ETS configuration recommended by the remote system.
1.3.6.1.4.1.12740.19.1.1.1.9TruthValueread-writecurrent
eqlDcbxAdminETSConTrafficClassGroupBandwidthTable
OBJECT-TYPE
Each octet corresponds to one traffic class group. The first octet corresponds to traffic class group 0, the second to traffic class group 1, and so on. Each octet contains the bandwidth in percent to be allocated to the traffic class group. Valid values are between 0 and 100 inclusive. The total of all eight octets must equal 100. Note that an octet string is used instead of a table to enable atomic programming of these values which is required to fulfill the requirement that they always total to 100.
1.3.6.1.4.1.12740.19.1.1.1.10OCTET STRING (SIZE(8))read-writecurrent
eqlDcbxAdminETSRecoTrafficClassGroupBandwidthTable
OBJECT-TYPE
Each octet corresponds to one traffic class group. The first octet corresponds to traffic class group 0, the second to traffic class group 1, and so on. Each octet contains the bandwidth in percent that the remote station is recommending to be allocated to the traffic class group. Valid values are between 0 and 100 inclusive. The total of all eight octets must equal 100. Note that an octet string is used instead of a table to enable atomic programming of these values which is required to fulfill the requirement that they always total to 100.
1.3.6.1.4.1.12740.19.1.1.1.11OCTET STRING (SIZE(8))read-writecurrent
eqlDcbxAdminPFCWilling
OBJECT-TYPE
Indicates if the local system is willing to accept the PFC configuration of the remote system.
1.3.6.1.4.1.12740.19.1.1.1.12TruthValueread-writecurrent
eqlDcbxAdminPFCMBC
OBJECT-TYPE
Indicates if the local system is capable of bypassing MACSEC processing when MACSEC is disabled.
1.3.6.1.4.1.12740.19.1.1.1.13TruthValueread-writecurrent
eqlDcbxAdminPFCCap
OBJECT-TYPE
Indicates the number of traffic classes on the local device that may simultaneously have PFC enabled.
1.3.6.1.4.1.12740.19.1.1.1.14EqlDcbxSupportedCapacityread-writecurrent
eqlDcbxAdminAppPriorityWilling
OBJECT-TYPE
Indicates if the local system is willing to accept the Application Priority configuration of the remote system.
1.3.6.1.4.1.12740.19.1.1.1.15TruthValueread-writecurrent
eqlDcbxConfigAutoDetectVLANEnable
OBJECT-TYPE
Enable automatic detection of VLAN ID.
1.3.6.1.4.1.12740.19.1.1.1.16TruthValueread-writecurrent
eqlDcbxConfigVLANId
OBJECT-TYPE
VLAN ID to use for DCB.
1.3.6.1.4.1.12740.19.1.1.1.17EqlVlanIdentifierread-writecurrent
eqlDcbxAdminETSConTrafficClassGroupPri0
OBJECT-TYPE
Indicates the traffic class group to which priority 0 is to be assigned.
1.3.6.1.4.1.12740.19.1.1.1.18EqlDcbxTrafficClassGroupValueread-writecurrent
eqlDcbxAdminETSConTrafficClassGroupPri1
OBJECT-TYPE
Indicates the traffic class group to which priority 1 is to be assigned.
1.3.6.1.4.1.12740.19.1.1.1.19EqlDcbxTrafficClassGroupValueread-writecurrent
eqlDcbxAdminETSConTrafficClassGroupPri2
OBJECT-TYPE
Indicates the traffic class group to which priority 2 is to be assigned.
1.3.6.1.4.1.12740.19.1.1.1.20EqlDcbxTrafficClassGroupValueread-writecurrent
eqlDcbxAdminETSConTrafficClassGroupPri3
OBJECT-TYPE
Indicates the traffic class group to which priority 3 is to be assigned.
1.3.6.1.4.1.12740.19.1.1.1.21EqlDcbxTrafficClassGroupValueread-writecurrent
eqlDcbxAdminETSConTrafficClassGroupPri4
OBJECT-TYPE
Indicates the traffic class group to which priority 4 is to be assigned.
1.3.6.1.4.1.12740.19.1.1.1.22EqlDcbxTrafficClassGroupValueread-writecurrent
eqlDcbxAdminETSConTrafficClassGroupPri5
OBJECT-TYPE
Indicates the traffic class group to which priority 5 is to be assigned.
1.3.6.1.4.1.12740.19.1.1.1.23EqlDcbxTrafficClassGroupValueread-writecurrent
eqlDcbxAdminETSConTrafficClassGroupPri6
OBJECT-TYPE
Indicates the traffic class group to which priority 6 is to be assigned.
1.3.6.1.4.1.12740.19.1.1.1.24EqlDcbxTrafficClassGroupValueread-writecurrent
eqlDcbxAdminETSConTrafficClassGroupPri7
OBJECT-TYPE
Indicates the traffic class group to which priority 7 is to be assigned.
1.3.6.1.4.1.12740.19.1.1.1.25EqlDcbxTrafficClassGroupValueread-writecurrent
eqlDcbxAdminPFCEnableEnabledPri0
OBJECT-TYPE
Indicates if PFC is enabled on priority 0
1.3.6.1.4.1.12740.19.1.1.1.26TruthValueread-writecurrent
eqlDcbxAdminPFCEnableEnabledPri1
OBJECT-TYPE
Indicates if PFC is enabled on priority 1
1.3.6.1.4.1.12740.19.1.1.1.27TruthValueread-writecurrent
eqlDcbxAdminPFCEnableEnabledPri2
OBJECT-TYPE
Indicates if PFC is enabled on priority 2
1.3.6.1.4.1.12740.19.1.1.1.28TruthValueread-writecurrent
eqlDcbxAdminPFCEnableEnabledPri3
OBJECT-TYPE
Indicates if PFC is enabled on priority 3
1.3.6.1.4.1.12740.19.1.1.1.29TruthValueread-writecurrent
eqlDcbxAdminPFCEnableEnabledPri4
OBJECT-TYPE
Indicates if PFC is enabled on priority 4
1.3.6.1.4.1.12740.19.1.1.1.30TruthValueread-writecurrent
eqlDcbxAdminPFCEnableEnabledPri5
OBJECT-TYPE
Indicates if PFC is enabled on priority 5
1.3.6.1.4.1.12740.19.1.1.1.31TruthValueread-writecurrent
eqlDcbxAdminPFCEnableEnabledPri6
OBJECT-TYPE
Indicates if PFC is enabled on priority 6
1.3.6.1.4.1.12740.19.1.1.1.32TruthValueread-writecurrent
eqlDcbxAdminPFCEnableEnabledPri7
OBJECT-TYPE
Indicates if PFC is enabled on priority 7
1.3.6.1.4.1.12740.19.1.1.1.33TruthValueread-writecurrent
eqlDcbxAdminAppPriorityiSCSITxEnable
OBJECT-TYPE
Indicates whether or not the iSCSI application priority entry is transmitted as part ot the Application Priority TLV.
1.3.6.1.4.1.12740.19.1.1.1.34TruthValueread-writecurrent
eqlDcbxAdminAppPriorityiSCSIProtocol
OBJECT-TYPE
The protocol indicator used for iSCSI in the Application Priority TLV.
1.3.6.1.4.1.12740.19.1.1.1.35EqlDcbxAppProtocolread-writecurrent
eqlDcbxAdminAppPriorityiSCSIPriority
OBJECT-TYPE
The priority value used for iSCSI in the Application Priority TLV.
1.3.6.1.4.1.12740.19.1.1.1.36EqlIEEE8021PriorityValueread-writecurrent
eqlDcbxAdminAppPriorityFCoETxEnable
OBJECT-TYPE
Indicates whether or not the FCoE application priority entry is transmitted as part ot the Application Priority TLV.
1.3.6.1.4.1.12740.19.1.1.1.37TruthValueread-writecurrent
eqlDcbxAdminAppPriorityFCoEProtocol
OBJECT-TYPE
The protocol indicator used for FCoE in the Application Priority TLV.
1.3.6.1.4.1.12740.19.1.1.1.38EqlDcbxAppProtocolread-writecurrent
eqlDcbxAdminAppPriorityFCoEPriority
OBJECT-TYPE
The priority value used for FCoE in the Application Priority TLV.
1.3.6.1.4.1.12740.19.1.1.1.39EqlIEEE8021PriorityValueread-writecurrent
eqlDcbxConfigDCBEnable
OBJECT-TYPE
Indicates whether or not DCB is enabled for this interface
1.3.6.1.4.1.12740.19.1.1.1.40TruthValueread-writecurrent
eqlDcbxConfigDCBX101Enable
OBJECT-TYPE
Indicates whether or not the transmit of DCBX 1.01 TLVs is enabled.
1.3.6.1.4.1.12740.19.1.1.1.41TruthValueread-writecurrent
eqlDcbxConfigDCBXIEEEDraftEnable
OBJECT-TYPE
Indicates whether or not the transmit of DCBX IEEE 802.1Qaz draft TLVs is enabled.
1.3.6.1.4.1.12740.19.1.1.1.42TruthValueread-writecurrent
eqlDcbxConfigQcnSubtype
OBJECT-TYPE
This field is deprecated.
1.3.6.1.4.1.12740.19.1.1.1.43EqlIEEEDraftSubtypeValueread-writedeprecated
eqlDcbxConfigETSConSubtype
OBJECT-TYPE
This field is deprecated.
1.3.6.1.4.1.12740.19.1.1.1.44EqlIEEEDraftSubtypeValueread-writedeprecated
eqlDcbxConfigETSRecoSubtype
OBJECT-TYPE
This field is deprecated.
1.3.6.1.4.1.12740.19.1.1.1.45EqlIEEEDraftSubtypeValueread-writedeprecated
eqlDcbxConfigPFCSubtype
OBJECT-TYPE
This field is deprecated.
1.3.6.1.4.1.12740.19.1.1.1.46EqlIEEEDraftSubtypeValueread-writedeprecated
eqlDcbxConfigAppPrioritySubtype
OBJECT-TYPE
This field is deprecated.
1.3.6.1.4.1.12740.19.1.1.1.47EqlIEEEDraftSubtypeValueread-writedeprecated
eqlDcbxConfigTCSupportedSubtype
OBJECT-TYPE
This field is deprecated.
1.3.6.1.4.1.12740.19.1.1.1.48EqlIEEEDraftSubtypeValueread-writedeprecated
eqlDcbxAdminETSRecoTrafficClassGroupPri0
OBJECT-TYPE
Indicates the traffic class group to which priority 0 is to be assigned.
1.3.6.1.4.1.12740.19.1.1.1.49EqlDcbxTrafficClassGroupValueread-writecurrent
eqlDcbxAdminETSRecoTrafficClassGroupPri1
OBJECT-TYPE
Indicates the traffic class group to which priority 1 is to be assigned.
1.3.6.1.4.1.12740.19.1.1.1.50EqlDcbxTrafficClassGroupValueread-writecurrent
eqlDcbxAdminETSRecoTrafficClassGroupPri2
OBJECT-TYPE
Indicates the traffic class group to which priority 2 is to be assigned.
1.3.6.1.4.1.12740.19.1.1.1.51EqlDcbxTrafficClassGroupValueread-writecurrent
eqlDcbxAdminETSRecoTrafficClassGroupPri3
OBJECT-TYPE
Indicates the traffic class group to which priority 3 is to be assigned.
1.3.6.1.4.1.12740.19.1.1.1.52EqlDcbxTrafficClassGroupValueread-writecurrent
eqlDcbxAdminETSRecoTrafficClassGroupPri4
OBJECT-TYPE
Indicates the traffic class group to which priority 4 is to be assigned.
1.3.6.1.4.1.12740.19.1.1.1.53EqlDcbxTrafficClassGroupValueread-writecurrent
eqlDcbxAdminETSRecoTrafficClassGroupPri5
OBJECT-TYPE
Indicates the traffic class group to which priority 5 is to be assigned.
1.3.6.1.4.1.12740.19.1.1.1.54EqlDcbxTrafficClassGroupValueread-writecurrent
eqlDcbxAdminETSRecoTrafficClassGroupPri6
OBJECT-TYPE
Indicates the traffic class group to which priority 6 is to be assigned.
1.3.6.1.4.1.12740.19.1.1.1.55EqlDcbxTrafficClassGroupValueread-writecurrent
eqlDcbxAdminETSRecoTrafficClassGroupPri7
OBJECT-TYPE
Indicates the traffic class group to which priority 7 is to be assigned.
1.3.6.1.4.1.12740.19.1.1.1.56EqlDcbxTrafficClassGroupValueread-writecurrent
eqlDcbCnGlobalMasterEnable
OBJECT-TYPE
The state of the congestion notification feature on this bridge component or system. If true, Congestion notification is enabled, and if false, congestion notification is disabled.
1.3.6.1.4.1.12740.19.1.1.1.57TruthValueread-writecurrent
eqlDcbCnRpPortPriMaxRps
OBJECT-TYPE
An integer controlling the maximum number of Reaction Points allowed for this CNPV on this Port. An end station SHALL not create more than this many Reaction Point on this Port, but it MAY create fewer.
1.3.6.1.4.1.12740.19.1.1.1.58Unsigned32 (1..100)read-writecurrent
eqlDcbCnRpgEnablePri0
OBJECT-TYPE
Controls the rpEnabled variable of the Reaction Point state machines of the Reaction Points (RPs) controlled by this entry as follows: true(1) The rpEnabled variable for the RPs controlled by this object are not held in the FALSE state, thus enabling them to pay attention to received CNMs. false(2) The rpEnabled variable for the RPs controlled by this object are held in the FALSE state, thus disabling them from paying attention to received CNMs.
1.3.6.1.4.1.12740.19.1.1.1.59TruthValueread-writecurrent
eqlDcbCnRpgEnablePri1
OBJECT-TYPE
Controls the rpEnabled variable of the Reaction Point state machines of the Reaction Points (RPs) controlled by this entry as follows: true(1) The rpEnabled variable for the RPs controlled by this object are not held in the FALSE state, thus enabling them to pay attention to received CNMs. false(2) The rpEnabled variable for the RPs controlled by this object are held in the FALSE state, thus disabling them from paying attention to received CNMs.
1.3.6.1.4.1.12740.19.1.1.1.60TruthValueread-writecurrent
eqlDcbCnRpgEnablePri2
OBJECT-TYPE
Controls the rpEnabled variable of the Reaction Point state machines of the Reaction Points (RPs) controlled by this entry as follows: true(1) The rpEnabled variable for the RPs controlled by this object are not held in the FALSE state, thus enabling them to pay attention to received CNMs. false(2) The rpEnabled variable for the RPs controlled by this object are held in the FALSE state, thus disabling them from paying attention to received CNMs.
1.3.6.1.4.1.12740.19.1.1.1.61TruthValueread-writecurrent
eqlDcbCnRpgEnablePri3
OBJECT-TYPE
Controls the rpEnabled variable of the Reaction Point state machines of the Reaction Points (RPs) controlled by this entry as follows: true(1) The rpEnabled variable for the RPs controlled by this object are not held in the FALSE state, thus enabling them to pay attention to received CNMs. false(2) The rpEnabled variable for the RPs controlled by this object are held in the FALSE state, thus disabling them from paying attention to received CNMs.
1.3.6.1.4.1.12740.19.1.1.1.62TruthValueread-writecurrent
eqlDcbCnRpgEnablePri4
OBJECT-TYPE
Controls the rpEnabled variable of the Reaction Point state machines of the Reaction Points (RPs) controlled by this entry as follows: true(1) The rpEnabled variable for the RPs controlled by this object are not held in the FALSE state, thus enabling them to pay attention to received CNMs. false(2) The rpEnabled variable for the RPs controlled by this object are held in the FALSE state, thus disabling them from paying attention to received CNMs.
1.3.6.1.4.1.12740.19.1.1.1.63TruthValueread-writecurrent
eqlDcbCnRpgEnablePri5
OBJECT-TYPE
Controls the rpEnabled variable of the Reaction Point state machines of the Reaction Points (RPs) controlled by this entry as follows: true(1) The rpEnabled variable for the RPs controlled by this object are not held in the FALSE state, thus enabling them to pay attention to received CNMs. false(2) The rpEnabled variable for the RPs controlled by this object are held in the FALSE state, thus disabling them from paying attention to received CNMs.
1.3.6.1.4.1.12740.19.1.1.1.64TruthValueread-writecurrent
eqlDcbCnRpgEnablePri6
OBJECT-TYPE
Controls the rpEnabled variable of the Reaction Point state machines of the Reaction Points (RPs) controlled by this entry as follows: true(1) The rpEnabled variable for the RPs controlled by this object are not held in the FALSE state, thus enabling them to pay attention to received CNMs. false(2) The rpEnabled variable for the RPs controlled by this object are held in the FALSE state, thus disabling them from paying attention to received CNMs.
1.3.6.1.4.1.12740.19.1.1.1.65TruthValueread-writecurrent
eqlDcbCnRpgEnablePri7
OBJECT-TYPE
Controls the rpEnabled variable of the Reaction Point state machines of the Reaction Points (RPs) controlled by this entry as follows: true(1) The rpEnabled variable for the RPs controlled by this object are not held in the FALSE state, thus enabling them to pay attention to received CNMs. false(2) The rpEnabled variable for the RPs controlled by this object are held in the FALSE state, thus disabling them from paying attention to received CNMs.
1.3.6.1.4.1.12740.19.1.1.1.66TruthValueread-writecurrent
eqlDcbCnRpgTimeReset
OBJECT-TYPE
This object controls the value for all of the state machine variables, rpgTimeReset, used to reset the timers RpWhile.
1.3.6.1.4.1.12740.19.1.1.1.67TimeIntervalread-writecurrent
eqlDcbCnRpgByteReset
OBJECT-TYPE
This object controls the value for all of the state machine variables, rpgByteReset, used to reset the counters rpByteCount.
1.3.6.1.4.1.12740.19.1.1.1.68Unsigned32read-writecurrent
eqlDcbCnRpgThreshold
OBJECT-TYPE
This object controls the number of times rpByteStage or rpTimeStage can count before the RP rate control state machine advances states.
1.3.6.1.4.1.12740.19.1.1.1.69Unsigned32read-writecurrent
eqlDcbCnRpgMaxRate
OBJECT-TYPE
This object controls the maximum rate, in multiples of 1 Mbit/s, at which an RP can transmit. Default value is the speed of the port. A system SHALL support a minimim value for this object that is no larger than 5 Mbits/s (object value 5). This rate includes all bits consequent to transmitting the frame on the LAN, including preamble, inter-frame gap, etc.
1.3.6.1.4.1.12740.19.1.1.1.70Unsigned32read-writecurrent
eqlDcbCnRpgAiRate
OBJECT-TYPE
This object controls the transmission rate increment in the RPR_ACTIVE_INCREASE state (rpgAiRate) in multiples of 1 Mbit/s. This rate includes all bits consequent to transmitting the frame on the LAN, including preamble, inter-frame gap, etc.
1.3.6.1.4.1.12740.19.1.1.1.71Unsigned32read-writecurrent
eqlDcbCnRpgHaiRate
OBJECT-TYPE
This object controls the transmission rate increment in the RPR_HYPER_INCREASE state (rpgHaiRate) in multiples of 1 Mbit/s. This rate includes all bits consequent to transmitting the frame on the LAN, including preamble, inter-frame gap, etc.
1.3.6.1.4.1.12740.19.1.1.1.72Unsigned32read-writecurrent
eqlDcbCnRpgGd
OBJECT-TYPE
This object controls the number of bits that the value of the Quantized Feedback field received in a CNM PDU is shifted to the right to decrease rpTargetRate. rpgGd is thus 2 to the negative power of this object, e.g., 7 means rpgGd = 1/128.
1.3.6.1.4.1.12740.19.1.1.1.73Integer32read-writecurrent
eqlDcbCnRpgMinDecFac
OBJECT-TYPE
This object controls the minimum factor by which the current RP transmit rate rpCurrentRate can be changed by reception of a Congestion Notification Message. Its integer value represents a percentage, from 1% to 100%.
1.3.6.1.4.1.12740.19.1.1.1.74Unsigned32 (1..100)read-writecurrent
eqlDcbCnRpgMinRate
OBJECT-TYPE
This object controls the minimum transmission rate (rpgMinRate) in multiples of 1 Mbit/s. A system SHALL support a value for this object that is no larger than 5 Mbit/s per second. This rate includes all bits consequent to transmitting the frame on the LAN, including preamble, inter-frame gap, etc.
1.3.6.1.4.1.12740.19.1.1.1.75Unsigned32read-writecurrent
eqlDcbDefaultiSCSIPriority
OBJECT-TYPE
The default priority value used for iSCSI when no priority value is negotiated through DCBX.
1.3.6.1.4.1.12740.19.1.1.1.76EqlIEEE8021PriorityValueread-writecurrent
eqlDcbDefaultFCoEPriority
OBJECT-TYPE
The default priority value used for FCoE when no priority value is negotiated through DCBX.
1.3.6.1.4.1.12740.19.1.1.1.77EqlIEEE8021PriorityValueread-writecurrent
eqlDcbxAdminETSConTsaTc0
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.1.1.78EqlDcbxTransmissionSelectionAlgorithmread-writecurrent
eqlDcbxAdminETSConTsaTc1
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.1.1.79EqlDcbxTransmissionSelectionAlgorithmread-writecurrent
eqlDcbxAdminETSConTsaTc2
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.1.1.80EqlDcbxTransmissionSelectionAlgorithmread-writecurrent
eqlDcbxAdminETSConTsaTc3
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.1.1.81EqlDcbxTransmissionSelectionAlgorithmread-writecurrent
eqlDcbxAdminETSConTsaTc4
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.1.1.82EqlDcbxTransmissionSelectionAlgorithmread-writecurrent
eqlDcbxAdminETSConTsaTc5
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.1.1.83EqlDcbxTransmissionSelectionAlgorithmread-writecurrent
eqlDcbxAdminETSConTsaTc6
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.1.1.84EqlDcbxTransmissionSelectionAlgorithmread-writecurrent
eqlDcbxAdminETSConTsaTc7
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.1.1.85EqlDcbxTransmissionSelectionAlgorithmread-writecurrent
eqlDcbxAdminETSRecoTsaTc0
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.1.1.86EqlDcbxTransmissionSelectionAlgorithmread-writecurrent
eqlDcbxAdminETSRecoTsaTc1
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.1.1.87EqlDcbxTransmissionSelectionAlgorithmread-writecurrent
eqlDcbxAdminETSRecoTsaTc2
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.1.1.88EqlDcbxTransmissionSelectionAlgorithmread-writecurrent
eqlDcbxAdminETSRecoTsaTc3
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.1.1.89EqlDcbxTransmissionSelectionAlgorithmread-writecurrent
eqlDcbxAdminETSRecoTsaTc4
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.1.1.90EqlDcbxTransmissionSelectionAlgorithmread-writecurrent
eqlDcbxAdminETSRecoTsaTc5
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.1.1.91EqlDcbxTransmissionSelectionAlgorithmread-writecurrent
eqlDcbxAdminETSRecoTsaTc6
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.1.1.92EqlDcbxTransmissionSelectionAlgorithmread-writecurrent
eqlDcbxAdminETSRecoTsaTc7
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.1.1.93EqlDcbxTransmissionSelectionAlgorithmread-writecurrent
eqlDcbDynamicIfTable
OBJECT-TYPE
EqualLogic-Dynamic A table of DCB information per each interface of a system. Each row in this table supplies values for one port's DCB parameters.
1.3.6.1.4.1.12740.19.1.2not-accessiblecurrent
eqlDcbDynamicIfEntry
OBJECT-TYPE
An entry in the DCB table, containing information about DCB on a single interface.
1.3.6.1.4.1.12740.19.1.2.1not-accessiblecurrent
eqlDcbPfcRequestsSent
OBJECT-TYPE
A count of the invoked PFC M_CONTROL.request primitives.
1.3.6.1.4.1.12740.19.1.2.1.1Counter32read-onlycurrent
eqlDcbPfcIndicationsReceived
OBJECT-TYPE
A count of the received PFC M_CONTROL.indication primitives.
1.3.6.1.4.1.12740.19.1.2.1.2Counter32read-onlycurrent
eqlDcbxLocTCSupported
OBJECT-TYPE
This field is deprecated.
1.3.6.1.4.1.12740.19.1.2.1.3EqlDcbxSupportedCapacityread-onlydeprecated
eqlDcbxLocETSConMaxTCG
OBJECT-TYPE
Indicates the number of Traffic Class Groups supported on the local system. A value of 0 indicates that 8 Traffic Class Groups are supported.
1.3.6.1.4.1.12740.19.1.2.1.4EqlDcbxSupportedCapacityread-onlycurrent
eqlDcbxLocETSConWilling
OBJECT-TYPE
Indicates if the local system is willing to accept the ETS configuration recommended by the remote system.
1.3.6.1.4.1.12740.19.1.2.1.5TruthValueread-onlycurrent
eqlDcbxLocETSConTrafficClassGroupBandwidthTable
OBJECT-TYPE
Each octet corresponds to one traffic class group. The first octet corresponds to traffic class group 0, the second to traffic class group 1, and so on. Each octet contains the bandwidth in percent to be allocated to the traffic class group. Valid values are between 0 and 100 inclusive. The total of all eight octets must equal 100. Note that an octet string is used instead of a table to enable atomic programming of these values which is required to fulfill the requirement that they always total to 100.
1.3.6.1.4.1.12740.19.1.2.1.6OCTET STRING (SIZE(8))read-onlycurrent
eqlDcbxLocETSRecoTrafficClassGroupBandwidthTable
OBJECT-TYPE
Each octet corresponds to one traffic class group. The first octet corresponds to traffic class group 0, the second to traffic class group 1, and so on. Each octet contains the bandwidth in percent that the remote station is recommending to be allocated to the traffic class group. Valid values are between 0 and 100 inclusive. The total of all eight octets must equal 100. Note that an octet string is used instead of a table to enable atomic programming of these values which is required to fulfill the requirement that they always total to 100.
1.3.6.1.4.1.12740.19.1.2.1.7OCTET STRING (SIZE(8))read-onlycurrent
eqlDcbxLocPFCWilling
OBJECT-TYPE
Indicates if the local system is willing to accept the PFC configuration of the remote system.
1.3.6.1.4.1.12740.19.1.2.1.8TruthValueread-onlycurrent
eqlDcbxLocPFCMBC
OBJECT-TYPE
Indicates if the local system is capable of bypassing MACSEC processing when MACSEC is disabled.
1.3.6.1.4.1.12740.19.1.2.1.9TruthValueread-onlycurrent
eqlDcbxLocPFCCap
OBJECT-TYPE
Indicates the number of traffic classes on the local device that may simultaneously have PFC enabled. Zero indicates no limitation, i.e. all available traffic classes may have PFC enabled.
1.3.6.1.4.1.12740.19.1.2.1.10EqlDcbxSupportedCapacityread-onlycurrent
eqlDcbxLocAppPriorityWilling
OBJECT-TYPE
Indicates if the local system is willing to accept the Application Priority configuration of the remote system.
1.3.6.1.4.1.12740.19.1.2.1.11TruthValueread-onlycurrent
eqlDcbxRemTCSupported
OBJECT-TYPE
This field is deprecated.
1.3.6.1.4.1.12740.19.1.2.1.12EqlDcbxSupportedCapacityread-onlydeprecated
eqlDcbxRemETSConMaxTCG
OBJECT-TYPE
Indicates the number of Traffic Class Groups supported on the remote system. A value of 0 indicates that 8 Traffic Class Groups are supported.
1.3.6.1.4.1.12740.19.1.2.1.13EqlDcbxSupportedCapacityread-onlycurrent
eqlDcbxRemETSConWilling
OBJECT-TYPE
Indicates if the remote system is willing to accept the ETS configuration recommended by the remote system.
1.3.6.1.4.1.12740.19.1.2.1.14TruthValueread-onlycurrent
eqlDcbxRemETSConTrafficClassGroupBandwidthTable
OBJECT-TYPE
Each octet corresponds to one traffic class group. The first octet corresponds to traffic class group 0, the second to traffic class group 1, and so on. Each octet contains the bandwidth in percent to be allocated to the traffic class group. Valid values are between 0 and 100 inclusive. The total of all eight octets must equal 100. Note that an octet string is used instead of a table to enable atomic programming of these values which is required to fulfill the requirement that they always total to 100.
1.3.6.1.4.1.12740.19.1.2.1.15OCTET STRING (SIZE(8))read-onlycurrent
eqlDcbxRemETSRecoTrafficClassGroupBandwidthTable
OBJECT-TYPE
Each octet corresponds to one traffic class group. The first octet corresponds to traffic class group 0, the second to traffic class group 1, and so on. Each octet contains the bandwidth in percent that the remote station is recommending to be allocated to the traffic class group. Valid values are between 0 and 100 inclusive. The total of all eight octets must equal 100. Note that an octet string is used instead of a table to enable atomic programming of these values which is required to fulfill the requirement that they always total to 100.
1.3.6.1.4.1.12740.19.1.2.1.16OCTET STRING (SIZE(8))read-onlycurrent
eqlDcbxRemPFCWilling
OBJECT-TYPE
Indicates if the remote system is willing to accept the PFC configuration of the local system.
1.3.6.1.4.1.12740.19.1.2.1.17TruthValueread-onlycurrent
eqlDcbxRemPFCMBC
OBJECT-TYPE
Indicates if the remote system is capable of bypassing MACSEC processing when MACSEC is disabled.
1.3.6.1.4.1.12740.19.1.2.1.18TruthValueread-onlycurrent
eqlDcbxRemPFCCap
OBJECT-TYPE
Indicates the number of traffic classes on the remote device that may simultaneously have PFC enabled. Zero indicates no limitation, i.e. all available traffic classes may have PFC enabled.
1.3.6.1.4.1.12740.19.1.2.1.19EqlDcbxSupportedCapacityread-onlycurrent
eqlDcbxRemAppPriorityWilling
OBJECT-TYPE
Indicates if the remote system is willing to accept the Application Priority configuration of the local system.
1.3.6.1.4.1.12740.19.1.2.1.20TruthValueread-onlycurrent
eqlDcbxLocETSConTrafficClassGroupPri0
OBJECT-TYPE
Indicates the traffic class group to which priority 0 is assigned.
1.3.6.1.4.1.12740.19.1.2.1.21EqlDcbxTrafficClassGroupValueread-onlycurrent
eqlDcbxLocETSConTrafficClassGroupPri1
OBJECT-TYPE
Indicates the traffic class group to which priority 1 is assigned.
1.3.6.1.4.1.12740.19.1.2.1.22EqlDcbxTrafficClassGroupValueread-onlycurrent
eqlDcbxLocETSConTrafficClassGroupPri2
OBJECT-TYPE
Indicates the traffic class group to which priority 2 is assigned.
1.3.6.1.4.1.12740.19.1.2.1.23EqlDcbxTrafficClassGroupValueread-onlycurrent
eqlDcbxLocETSConTrafficClassGroupPri3
OBJECT-TYPE
Indicates the traffic class group to which priority 3 is assigned.
1.3.6.1.4.1.12740.19.1.2.1.24EqlDcbxTrafficClassGroupValueread-onlycurrent
eqlDcbxLocETSConTrafficClassGroupPri4
OBJECT-TYPE
Indicates the traffic class group to which priority 4 is assigned.
1.3.6.1.4.1.12740.19.1.2.1.25EqlDcbxTrafficClassGroupValueread-onlycurrent
eqlDcbxLocETSConTrafficClassGroupPri5
OBJECT-TYPE
Indicates the traffic class group to which priority 5 is to be assigned.
1.3.6.1.4.1.12740.19.1.2.1.26EqlDcbxTrafficClassGroupValueread-onlycurrent
eqlDcbxLocETSConTrafficClassGroupPri6
OBJECT-TYPE
Indicates the traffic class group to which priority 6 is assigned.
1.3.6.1.4.1.12740.19.1.2.1.27EqlDcbxTrafficClassGroupValueread-onlycurrent
eqlDcbxLocETSConTrafficClassGroupPri7
OBJECT-TYPE
Indicates the traffic class group to which priority 7 is assigned.
1.3.6.1.4.1.12740.19.1.2.1.28EqlDcbxTrafficClassGroupValueread-onlycurrent
eqlDcbxLocPFCEnableEnabledPri0
OBJECT-TYPE
Indicates if PFC is enabled on priority 0
1.3.6.1.4.1.12740.19.1.2.1.29TruthValueread-onlycurrent
eqlDcbxLocPFCEnableEnabledPri1
OBJECT-TYPE
Indicates if PFC is enabled on priority 1
1.3.6.1.4.1.12740.19.1.2.1.30TruthValueread-onlycurrent
eqlDcbxLocPFCEnableEnabledPri2
OBJECT-TYPE
Indicates if PFC is enabled on priority 2
1.3.6.1.4.1.12740.19.1.2.1.31TruthValueread-onlycurrent
eqlDcbxLocPFCEnableEnabledPri3
OBJECT-TYPE
Indicates if PFC is enabled on priority 3
1.3.6.1.4.1.12740.19.1.2.1.32TruthValueread-onlycurrent
eqlDcbxLocPFCEnableEnabledPri4
OBJECT-TYPE
Indicates if PFC is enabled on priority 4
1.3.6.1.4.1.12740.19.1.2.1.33TruthValueread-onlycurrent
eqlDcbxLocPFCEnableEnabledPri5
OBJECT-TYPE
Indicates if PFC is enabled on priority 5
1.3.6.1.4.1.12740.19.1.2.1.34TruthValueread-onlycurrent
eqlDcbxLocPFCEnableEnabledPri6
OBJECT-TYPE
Indicates if PFC is enabled on priority 6
1.3.6.1.4.1.12740.19.1.2.1.35TruthValueread-onlycurrent
eqlDcbxLocPFCEnableEnabledPri7
OBJECT-TYPE
Indicates if PFC is enabled on priority 7
1.3.6.1.4.1.12740.19.1.2.1.36TruthValueread-onlycurrent
eqlDcbxLocVLANId
OBJECT-TYPE
VLAN ID to use for DCB.
1.3.6.1.4.1.12740.19.1.2.1.37EqlVlanIdentifierread-onlycurrent
eqlDcbxLocVLANState
OBJECT-TYPE
State of VLAN tagging.
1.3.6.1.4.1.12740.19.1.2.1.38EqlDcbxVlanStateread-onlycurrent
eqlDcbxLocDCBState
OBJECT-TYPE
Current state of DCB.
1.3.6.1.4.1.12740.19.1.2.1.39EqlDcbxStateread-onlycurrent
eqlDcbxLocPFCState
OBJECT-TYPE
Current state of DCB feature PFC.
1.3.6.1.4.1.12740.19.1.2.1.40EqlDcbxStateread-onlycurrent
eqlDcbxLocETSState
OBJECT-TYPE
Current state of DCB feature ETS.
1.3.6.1.4.1.12740.19.1.2.1.41EqlDcbxStateread-onlycurrent
eqlDcbxLocQCNState
OBJECT-TYPE
Current state of DCB feature QCN.
1.3.6.1.4.1.12740.19.1.2.1.42EqlDcbxStateread-onlycurrent
eqlDcbxLociSCSIPriority
OBJECT-TYPE
Current iSCSI priority.
1.3.6.1.4.1.12740.19.1.2.1.43EqlIEEE8021PriorityValueread-onlycurrent
eqlDcbxLocFCoEPriority
OBJECT-TYPE
Current state of DCB feature QCN.
1.3.6.1.4.1.12740.19.1.2.1.44EqlIEEE8021PriorityValueread-onlycurrent
eqlDcbxLocBytesRxPri0
OBJECT-TYPE
Count of bytes recevied on priority 0.
1.3.6.1.4.1.12740.19.1.2.1.45Counter64read-onlycurrent
eqlDcbxLocBytesRxPri1
OBJECT-TYPE
Count of bytes recevied on priority 1.
1.3.6.1.4.1.12740.19.1.2.1.46Counter64read-onlycurrent
eqlDcbxLocBytesRxPri2
OBJECT-TYPE
Count of bytes recevied on priority 2.
1.3.6.1.4.1.12740.19.1.2.1.47Counter64read-onlycurrent
eqlDcbxLocBytesRxPri3
OBJECT-TYPE
Count of bytes recevied on priority 3.
1.3.6.1.4.1.12740.19.1.2.1.48Counter64read-onlycurrent
eqlDcbxLocBytesRxPri4
OBJECT-TYPE
Count of bytes recevied on priority 4.
1.3.6.1.4.1.12740.19.1.2.1.49Counter64read-onlycurrent
eqlDcbxLocBytesRxPri5
OBJECT-TYPE
Count of bytes recevied on priority 5.
1.3.6.1.4.1.12740.19.1.2.1.50Counter64read-onlycurrent
eqlDcbxLocBytesRxPri6
OBJECT-TYPE
Count of bytes recevied on priority 6.
1.3.6.1.4.1.12740.19.1.2.1.51Counter64read-onlycurrent
eqlDcbxLocBytesRxPri7
OBJECT-TYPE
Count of bytes recevied on priority 7.
1.3.6.1.4.1.12740.19.1.2.1.52Counter64read-onlycurrent
eqlDcbxLocBytesTxPri0
OBJECT-TYPE
Count of bytes transmitted on priority 0.
1.3.6.1.4.1.12740.19.1.2.1.53Counter64read-onlycurrent
eqlDcbxLocBytesTxPri1
OBJECT-TYPE
Count of bytes transmitted on priority 1.
1.3.6.1.4.1.12740.19.1.2.1.54Counter64read-onlycurrent
eqlDcbxLocBytesTxPri2
OBJECT-TYPE
Count of bytes transmitted on priority 2.
1.3.6.1.4.1.12740.19.1.2.1.55Counter64read-onlycurrent
eqlDcbxLocBytesTxPri3
OBJECT-TYPE
Count of bytes transmitted on priority 3.
1.3.6.1.4.1.12740.19.1.2.1.56Counter64read-onlycurrent
eqlDcbxLocBytesTxPri4
OBJECT-TYPE
Count of bytes transmitted on priority 4.
1.3.6.1.4.1.12740.19.1.2.1.57Counter64read-onlycurrent
eqlDcbxLocBytesTxPri5
OBJECT-TYPE
Count of bytes transmitted on priority 5.
1.3.6.1.4.1.12740.19.1.2.1.58Counter64read-onlycurrent
eqlDcbxLocBytesTxPri6
OBJECT-TYPE
Count of bytes transmitted on priority 6.
1.3.6.1.4.1.12740.19.1.2.1.59Counter64read-onlycurrent
eqlDcbxLocBytesTxPri7
OBJECT-TYPE
Count of bytes transmitted on priority 7.
1.3.6.1.4.1.12740.19.1.2.1.60Counter64read-onlycurrent
eqlDcbCnRpPortPriCreatedRpsPri0
OBJECT-TYPE
This object returns the number of times any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable set TRUE by the reception of a Congestion Notification Message. Dividing the change in eqlDcbCnRpPortPriCentiseconds by the change in this object over a time interval yields the average lifetime of an active RP during that interval.
1.3.6.1.4.1.12740.19.1.2.1.61Counter64read-onlycurrent
eqlDcbCnRpPortPriCreatedRpsPri1
OBJECT-TYPE
This object returns the number of times any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable set TRUE by the reception of a Congestion Notification Message. Dividing the change in eqlDcbCnRpPortPriCentiseconds by the change in this object over a time interval yields the average lifetime of an active RP during that interval.
1.3.6.1.4.1.12740.19.1.2.1.62Counter64read-onlycurrent
eqlDcbCnRpPortPriCreatedRpsPri2
OBJECT-TYPE
This object returns the number of times any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable set TRUE by the reception of a Congestion Notification Message. Dividing the change in eqlDcbCnRpPortPriCentiseconds by the change in this object over a time interval yields the average lifetime of an active RP during that interval.
1.3.6.1.4.1.12740.19.1.2.1.63Counter64read-onlycurrent
eqlDcbCnRpPortPriCreatedRpsPri3
OBJECT-TYPE
This object returns the number of times any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable set TRUE by the reception of a Congestion Notification Message. Dividing the change in eqlDcbCnRpPortPriCentiseconds by the change in this object over a time interval yields the average lifetime of an active RP during that interval.
1.3.6.1.4.1.12740.19.1.2.1.64Counter64read-onlycurrent
eqlDcbCnRpPortPriCreatedRpsPri4
OBJECT-TYPE
This object returns the number of times any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable set TRUE by the reception of a Congestion Notification Message. Dividing the change in eqlDcbCnRpPortPriCentiseconds by the change in this object over a time interval yields the average lifetime of an active RP during that interval.
1.3.6.1.4.1.12740.19.1.2.1.65Counter64read-onlycurrent
eqlDcbCnRpPortPriCreatedRpsPri5
OBJECT-TYPE
This object returns the number of times any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable set TRUE by the reception of a Congestion Notification Message. Dividing the change in eqlDcbCnRpPortPriCentiseconds by the change in this object over a time interval yields the average lifetime of an active RP during that interval.
1.3.6.1.4.1.12740.19.1.2.1.66Counter64read-onlycurrent
eqlDcbCnRpPortPriCreatedRpsPri6
OBJECT-TYPE
This object returns the number of times any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable set TRUE by the reception of a Congestion Notification Message. Dividing the change in eqlDcbCnRpPortPriCentiseconds by the change in this object over a time interval yields the average lifetime of an active RP during that interval.
1.3.6.1.4.1.12740.19.1.2.1.67Counter64read-onlycurrent
eqlDcbCnRpPortPriCreatedRpsPri7
OBJECT-TYPE
This object returns the number of times any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable set TRUE by the reception of a Congestion Notification Message. Dividing the change in eqlDcbCnRpPortPriCentiseconds by the change in this object over a time interval yields the average lifetime of an active RP during that interval.
1.3.6.1.4.1.12740.19.1.2.1.68Counter64read-onlycurrent
eqlDcbCnRpPortPriCentisecondsPri0
OBJECT-TYPE
This object returns the total number of centi-seconds that any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable in the TRUE state. That is, once each centi-second, this counter is incremented by the number of RPs this entry controls that are actively rate limiting output frames. Dividing the change in this object over a time interval by the length of the interval yields the average number of RPs active over that interval. Dividing the change in this object by the change in eqlDcbCnRpPortPriCreatedRps over that same time interval yields the average lifetime of an active RP during that interval.
1.3.6.1.4.1.12740.19.1.2.1.69Counter64read-onlycurrent
eqlDcbCnRpPortPriCentisecondsPri1
OBJECT-TYPE
This object returns the total number of centi-seconds that any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable in the TRUE state. That is, once each centi-second, this counter is incremented by the number of RPs this entry controls that are actively rate limiting output frames. Dividing the change in this object over a time interval by the length of the interval yields the average number of RPs active over that interval. Dividing the change in this object by the change in eqlDcbCnRpPortPriCreatedRps over that same time interval yields the average lifetime of an active RP during that interval.
1.3.6.1.4.1.12740.19.1.2.1.70Counter64read-onlycurrent
eqlDcbCnRpPortPriCentisecondsPri2
OBJECT-TYPE
This object returns the total number of centi-seconds that any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable in the TRUE state. That is, once each centi-second, this counter is incremented by the number of RPs this entry controls that are actively rate limiting output frames. Dividing the change in this object over a time interval by the length of the interval yields the average number of RPs active over that interval. Dividing the change in this object by the change in eqlDcbCnRpPortPriCreatedRps over that same time interval yields the average lifetime of an active RP during that interval.
1.3.6.1.4.1.12740.19.1.2.1.71Counter64read-onlycurrent
eqlDcbCnRpPortPriCentisecondsPri3
OBJECT-TYPE
This object returns the total number of centi-seconds that any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable in the TRUE state. That is, once each centi-second, this counter is incremented by the number of RPs this entry controls that are actively rate limiting output frames. Dividing the change in this object over a time interval by the length of the interval yields the average number of RPs active over that interval. Dividing the change in this object by the change in eqlDcbCnRpPortPriCreatedRps over that same time interval yields the average lifetime of an active RP during that interval.
1.3.6.1.4.1.12740.19.1.2.1.72Counter64read-onlycurrent
eqlDcbCnRpPortPriCentisecondsPri4
OBJECT-TYPE
This object returns the total number of centi-seconds that any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable in the TRUE state. That is, once each centi-second, this counter is incremented by the number of RPs this entry controls that are actively rate limiting output frames. Dividing the change in this object over a time interval by the length of the interval yields the average number of RPs active over that interval. Dividing the change in this object by the change in eqlDcbCnRpPortPriCreatedRps over that same time interval yields the average lifetime of an active RP during that interval.
1.3.6.1.4.1.12740.19.1.2.1.73Counter64read-onlycurrent
eqlDcbCnRpPortPriCentisecondsPri5
OBJECT-TYPE
This object returns the total number of centi-seconds that any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable in the TRUE state. That is, once each centi-second, this counter is incremented by the number of RPs this entry controls that are actively rate limiting output frames. Dividing the change in this object over a time interval by the length of the interval yields the average number of RPs active over that interval. Dividing the change in this object by the change in eqlDcbCnRpPortPriCreatedRps over that same time interval yields the average lifetime of an active RP during that interval.
1.3.6.1.4.1.12740.19.1.2.1.74Counter64read-onlycurrent
eqlDcbCnRpPortPriCentisecondsPri6
OBJECT-TYPE
This object returns the total number of centi-seconds that any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable in the TRUE state. That is, once each centi-second, this counter is incremented by the number of RPs this entry controls that are actively rate limiting output frames. Dividing the change in this object over a time interval by the length of the interval yields the average number of RPs active over that interval. Dividing the change in this object by the change in eqlDcbCnRpPortPriCreatedRps over that same time interval yields the average lifetime of an active RP during that interval.
1.3.6.1.4.1.12740.19.1.2.1.75Counter64read-onlycurrent
eqlDcbCnRpPortPriCentisecondsPri7
OBJECT-TYPE
This object returns the total number of centi-seconds that any of the Reaction Points (RPs) controlled by this entry has had its rpEnabled variable in the TRUE state. That is, once each centi-second, this counter is incremented by the number of RPs this entry controls that are actively rate limiting output frames. Dividing the change in this object over a time interval by the length of the interval yields the average number of RPs active over that interval. Dividing the change in this object by the change in eqlDcbCnRpPortPriCreatedRps over that same time interval yields the average lifetime of an active RP during that interval.
1.3.6.1.4.1.12740.19.1.2.1.76Counter64read-onlycurrent
eqlDcbxLocPfcPausePri0
OBJECT-TYPE
Number of time PFC pause frames received for priority 0.
1.3.6.1.4.1.12740.19.1.2.1.77Counter64read-onlycurrent
eqlDcbxLocPfcPausePri1
OBJECT-TYPE
Number of time PFC pause frames received for priority 1.
1.3.6.1.4.1.12740.19.1.2.1.78Counter64read-onlycurrent
eqlDcbxLocPfcPausePri2
OBJECT-TYPE
Number of time PFC pause frames received for priority 2.
1.3.6.1.4.1.12740.19.1.2.1.79Counter64read-onlycurrent
eqlDcbxLocPfcPausePri3
OBJECT-TYPE
Number of time PFC pause frames received for priority 3.
1.3.6.1.4.1.12740.19.1.2.1.80Counter64read-onlycurrent
eqlDcbxLocPfcPausePri4
OBJECT-TYPE
Number of time PFC pause frames received for priority 4.
1.3.6.1.4.1.12740.19.1.2.1.81Counter64read-onlycurrent
eqlDcbxLocPfcPausePri5
OBJECT-TYPE
Number of time PFC pause frames received for priority 5.
1.3.6.1.4.1.12740.19.1.2.1.82Counter64read-onlycurrent
eqlDcbxLocPfcPausePri6
OBJECT-TYPE
Number of time PFC pause frames received for priority 6.
1.3.6.1.4.1.12740.19.1.2.1.83Counter64read-onlycurrent
eqlDcbxLocPfcPausePri7
OBJECT-TYPE
Number of time PFC pause frames received for priority 7.
1.3.6.1.4.1.12740.19.1.2.1.84Counter64read-onlycurrent
eqlDcbxLocPfcUnpausePri0
OBJECT-TYPE
Number of time PFC unpause frames received for priority 0.
1.3.6.1.4.1.12740.19.1.2.1.85Counter64read-onlycurrent
eqlDcbxLocPfcUnpausePri1
OBJECT-TYPE
Number of time PFC unpause frames received for priority 1.
1.3.6.1.4.1.12740.19.1.2.1.86Counter64read-onlycurrent
eqlDcbxLocPfcUnpausePri2
OBJECT-TYPE
Number of time PFC unpause frames received for priority 2.
1.3.6.1.4.1.12740.19.1.2.1.87Counter64read-onlycurrent
eqlDcbxLocPfcUnpausePri3
OBJECT-TYPE
Number of time PFC unpause frames received for priority 3.
1.3.6.1.4.1.12740.19.1.2.1.88Counter64read-onlycurrent
eqlDcbxLocPfcUnpausePri4
OBJECT-TYPE
Number of time PFC unpause frames received for priority 4.
1.3.6.1.4.1.12740.19.1.2.1.89Counter64read-onlycurrent
eqlDcbxLocPfcUnpausePri5
OBJECT-TYPE
Number of time PFC unpause frames received for priority 5.
1.3.6.1.4.1.12740.19.1.2.1.90Counter64read-onlycurrent
eqlDcbxLocPfcUnpausePri6
OBJECT-TYPE
Number of time PFC unpause frames received for priority 6.
1.3.6.1.4.1.12740.19.1.2.1.91Counter64read-onlycurrent
eqlDcbxLocPfcUnpausePri7
OBJECT-TYPE
Number of time PFC unpause frames received for priority 7.
1.3.6.1.4.1.12740.19.1.2.1.92Counter64read-onlycurrent
eqlDcbxLocETSConTsaTc0
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.93EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxLocETSConTsaTc1
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.94EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxLocETSConTsaTc2
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.95EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxLocETSConTsaTc3
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.96EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxLocETSConTsaTc4
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.97EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxLocETSConTsaTc5
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.98EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxLocETSConTsaTc6
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.99EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxLocETSConTsaTc7
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.100EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxLocETSRecoTsaTc0
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.101EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxLocETSRecoTsaTc1
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.102EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxLocETSRecoTsaTc2
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.103EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxLocETSRecoTsaTc3
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.104EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxLocETSRecoTsaTc4
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.105EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxLocETSRecoTsaTc5
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.106EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxLocETSRecoTsaTc6
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.107EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxLocETSRecoTsaTc7
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.108EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxRemETSConTsaTc0
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.109EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxRemETSConTsaTc1
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.110EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxRemETSConTsaTc2
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.111EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxRemETSConTsaTc3
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.112EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxRemETSConTsaTc4
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.113EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxRemETSConTsaTc5
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.114EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxRemETSConTsaTc6
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.115EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxRemETSConTsaTc7
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.116EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxRemETSRecoTsaTc0
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.117EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxRemETSRecoTsaTc1
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.118EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxRemETSRecoTsaTc2
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.119EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxRemETSRecoTsaTc3
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.120EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxRemETSRecoTsaTc4
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.121EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxRemETSRecoTsaTc5
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.122EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxRemETSRecoTsaTc6
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.123EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxRemETSRecoTsaTc7
OBJECT-TYPE
Indicates the transmission selection algorithm which is assigned to this traffic class.
1.3.6.1.4.1.12740.19.1.2.1.124EqlDcbxTransmissionSelectionAlgorithmread-onlycurrent
eqlDcbxLocDCBMode
OBJECT-TYPE
Current operating mode of DCB.
1.3.6.1.4.1.12740.19.1.2.1.125EqlDcbxModeread-onlycurrent