EATON-EMP-MIB
- Registered at
- 1.3.6.1.4.1.534.1.6.0
- Last updated
- 2007-03-12 00:00
- Organization
- Eaton Corporation
- Revisions
- 2007-03-12 00:00
- Namespace
- eaton
- Source file
EATON-EMP-MIB- Digest
sha256:a3071c053b7216e267e95f17adba1f7cdbc8ba6efdbc55f59e8bbb6fb3db52de
Description
The MIB module for Eaton Environment Monitoring Probes (EMP). The elements of this MIB have been extracted from the Eaton PowerMIB and placed in this separate MIB file for convenience. Copyright (C) Eaton Corporation (2007).
Contact
Eaton Power Quality Technical Support (PQTS) group www.eaton.com/powerxpert Technical Resource Center phone numbers United States: 1.800.843.9433 or 919.870.3028 Canada: 1.800.461.9166 ext. 260 All other countries: Call your local service representative.
Imports
| From | Symbols |
|---|---|
| EATON-OIDS | xupsEnvironment |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
EATON-EMP-MIB EATON-OIDS SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| eatonEMPConformance OBJECT-IDENTITY | 1.3.6.1.4.1.534.1.6.0.2 | |||
| xupsEnvRemoteTemp OBJECT-TYPE The reading of an EMP's temperature sensor. | 1.3.6.1.4.1.534.1.6.5 | Integer32 (-100..200) | read-only | current |
| xupsEnvRemoteHumidity OBJECT-TYPE The reading of an EMP's humidity sensor. | 1.3.6.1.4.1.534.1.6.6 | Integer32 (0..100) | read-only | current |
| xupsEnvNumContacts OBJECT-TYPE The number of Contacts in the xupsContactSenseTable. This object indicates the number of rows in the xupsContactSenseTable. | 1.3.6.1.4.1.534.1.6.7 | Integer32 (1..1024) | read-only | current |
| xupsContactSenseTable OBJECT-TYPE A list of Contact Sensing table entries. The number of entries is given by the value of xupsEnvNumContacts. | 1.3.6.1.4.1.534.1.6.8 | not-accessible | current | |
| xupsContactsTableEntry OBJECT-TYPE An entry containing information applicable to a particular Contact input. | 1.3.6.1.4.1.534.1.6.8.1 | not-accessible | current | |
| xupsContactIndex OBJECT-TYPE The Contact identifier; identical to the Contact Number. This object is not-accessible to MIB browsers, but had to be changed to read-only to satisfy SMIv2 syntax checkers if it is included in traps. | 1.3.6.1.4.1.534.1.6.8.1.1 | Integer32 (1..1024) | read-only | current |
| xupsContactType OBJECT-TYPE The normal state for this contact. The 'other' (not 'Normally') state is the Active state for generating the xupstdContactActiveNotice trap. If anyChange(3) is selected, then this trap is sent any time the contact changes to either Open or Closed. No traps are sent if the Contact is set to notUsed(4). In many cases, the configuration for Contacts may be done by other means, so this object may be read-only. | 1.3.6.1.4.1.534.1.6.8.1.2 | INTEGER {normallyOpen(1), normallyClosed(2), anyChange(3), notUsed(4)} | read-write | current |
| xupsContactState OBJECT-TYPE The current state of the Contact input; the value is based on the open/closed input state and the setting for xupsContactType. When entering the openWithNotice(3) and closedWithNotice(4) states, no entries added to the xupsAlarmTable, but the xupstdContactActiveNotice trap is sent. | 1.3.6.1.4.1.534.1.6.8.1.3 | INTEGER {open(1), closed(2), openWithNotice(3), closedWithNotice(4)} | read-only | current |
| xupsContactDescr OBJECT-TYPE A label identifying the Contact. This object should be set by the administrator. | 1.3.6.1.4.1.534.1.6.8.1.4 | DisplayString (SIZE(0..63)) | read-write | current |
| xupsEnvRemoteTempLowerLimit OBJECT-TYPE The Lower Limit of the EMP temperature; if xupsEnvRemoteTemp falls below this value, the xupsRemoteTempBad alarm will occur. | 1.3.6.1.4.1.534.1.6.9 | Integer32 (-100..200) | read-write | current |
| xupsEnvRemoteTempUpperLimit OBJECT-TYPE The Upper Limit of the EMP temperature; if xupsEnvRemoteTemp rises above this value, the xupsRemoteTempBad alarm will occur. This value should be greater than xupsEnvRemoteTempLowerLimit. | 1.3.6.1.4.1.534.1.6.10 | Integer32 (-100..200) | read-write | current |
| xupsEnvRemoteHumidityLowerLimit OBJECT-TYPE The Lower Limit of the EMP humidity reading; if xupsEnvRemoteHumidity falls below this value, the xupsRemoteHumidityBad alarm will occur. | 1.3.6.1.4.1.534.1.6.11 | Integer32 (0..100) | read-write | current |
| xupsEnvRemoteHumidityUpperLimit OBJECT-TYPE The Upper Limit of the EMP humidity reading; if xupsEnvRemoteHumidity rises above this value, the xupsRemoteHumidityBad alarm will occur. This value should be greater than xupsEnvRemoteHumidityLowerLimit. | 1.3.6.1.4.1.534.1.6.12 | Integer32 (0..100) | read-write | current |
Conformance
| Name | OID | Status |
|---|---|---|
| eatonEMPGroup OBJECT-GROUP The EMP scalar objects. | 1.3.6.1.4.1.534.1.6.0.2.1 | current |
| eatonEMPTableGroup OBJECT-GROUP The EMP Contacts Table objects. | 1.3.6.1.4.1.534.1.6.0.2.2 | current |
| eatonEMPSimpleCompliance MODULE-COMPLIANCE The compliance statement for a normal EMP. | 1.3.6.1.4.1.534.1.6.0.2.4 | current |